5 edition of the International conference on fatigue design · 16.45 - Welded components and...

1304

-044

- C

réd

it p

ho

tos

: ©C

itro

ën C

om

mu

nic

atio

n, L

aure

nt

Niv

alle

, Ch

arle

s A

nto

ine

d’A

uti

cham

p, A

lan

Mo

rel –

Fo

tolia

: ©

bar

lest

- ©

fder

ib -

©vl

aru

5th edition of the International conference on fatigue design

27 and 28 November 2013 - Senlis, France

www.fatiguedesign.org

CommitteesOrganisational committee:

M. Afzali (Cetim), F. Lefebvre (Cetim), I. Huther (Cetim), M. Risbet-Voitot (UTC), M. Lukic (CTICM), A. Bignonnet (AB consulting), A. Galtier (Ascometal CREAS), H.-P Lieurade (SF2M), J. Bernard Vogt (ENSCL), S. Calloch (Ensta), F. Morel (Arts et Métiers ParisTech), É. Charkaluk (École Centrale de Lille), L. Flacelière (Total), V. Aubin, (École Centrale de Paris), J. Choné (SF2M), S. Courtin (Areva), S. Fouvry (École Centrale de Lyon), A. Koster (École des Mines de Paris), M. Nguyen (SNCF), L. Rémy (École des Mines de Paris), F. Rezaï-Aria (École des Mines d’Albi), J.-L. Robert (IUT de Montluçon), F. Szmytka (PSA).

International technical committee:

J.A. Araújo (Brasil), M. Bacher-Hoechst (Germany), M. Brune (Germany), J.-Y. Buffière (France), M. Browne (United Kingdom), D. McDowell (USA), L. Dunai (Hungary), A. Fatemi (USA), W. Fricke (Germany), N. Gubeljak (Slovenia), G. Glinka (Canada), P. Haagensen (Norway), A. Hobbacher (Germany), K. Yamada (Japan), M. Kocak (Turkey), M. Lemaire (France), S.J. Maddox (United Kingdom), T. Lassen (Norway), J. Lu (Hong-Kong), A. Magnée (Belgium), H. Maitournam (France), G. Marquis (Finland), A. Nussbaumer (Switzerland), M. Prager (USA), W. Salvatore (Italy), J. Samuelsson (Sweden), M. Sonsino (Germany), A. Spagnoli (Italy), T. Svensson (Sweden), S. Walbridge (Canada).

M Social event: New in 2013Gala evening at the “Parc Astérix”: privatization of an attraction and dinner at the restaurant “Le Cirque” at the heart of the park.

M Access - 52 avenue Félix-Louat, 60300 Senlis, France.• Travellingbycar:motorwayA1exitn°8(Senlis).

• TocomefromtheinternationalAirportRoissyCharlesdeGaulle(CDG)orbytheTGVstation(RoissyCDG):

– Shuttles ”Cetim : Fatigue Design” – Taxi, 15 / 20 minutes, 40 / 50 euros.

• TocomefromOrlyAirport,firstjointheRoissyCDGAirportbyaninterairportshuttle.

M AccomodationAll usefull informations are on www.fatiguedesign.org. Dedicated shuttle services will be organised between the hotels and the conference site.

Partnerships

Wednesday 27 November Room 6

8.30 - Opening statement

Philippe Choderlos de Laclos, General Manager, Cetim, France

Mansour Afzali, Scientific Advisor, Cetim, France

9.00 - Plenary Session

FD13-K01 Assessment of existing steel structures - Recommendations for estimation of the remaining fatigue life, B. Kühn (Verheyen-Ingenieur, Germany)

FD13-K02 Laplace moving average model for multi-axial responses in fatigue analysis of a cultivator, I. Rychlik (Chalmers University of technology, Sweden)

FD13-K03 Fatigue analysis issues and strategies for electronic assemblies for high-reliability and harsh environment applications, W. C. Maia Filho, M. Brizoux (Thales, France)


FD13-K04 Fatigue Damage Modeling of Composite Structures, M. Kaminski (Onera, France)

FD13-K05 Reliable fatigue design, by rigid rules, by magic or by enlightened engineering, T. Svensson (SP Technical Research Institute of Sweden)

FD13-K06 Assessment of very high cycle fatigue (VHCF) effects in practical applications, M. Bacher-Hoechst, S. Issler (Robert Bosch GmbH, Corporate Sector Research and Advance Engineering, Germany)

Thursday 28 November Room 6

Les organisateurs se réservent le droit de modifier le présent programme en cas de nécessité.

Contact

[email protected]:+33(0)344673682www.fatiguedesign.org

The Fifth Fatigue Design 2013 conference aims to present the most innovative approaches and scientific progress in design methodologies, tools, and equipment’s life extension, focusing on industrial applications.

300 participants from the mechanical engineering, transport, energy, building and public works industries are expected.

To facilitate exchanges among participants, in addition to the two days of lectures, there will be:

- a poster exhibition (Candidature opened until juin 20th),

- a technological showcase featuring exhibits by service providers and technology suppliers.

Publisher of the Fatigue Design 2013

proceedings

6 7 8

Wednesday 27 November Room 6 Room 8 Thursday 28 November Room 6 Room 8

Room 7 Room 10 Room 7 Room 10

10.30 - Coffee Break

11.15 - Welded components and structures S01-1

FD13-01 Comparison between the Eurocode for fatigue of steel structures and the Eurocode for fatigue of aluminium structures, J. Maljaars, M. Lukic, F. Soetens (TNO,CTICM, Eindhoven university of technology)

FD13-14 S-N curves for welded, non-welded or improved welded details of marine structures, G. Parmentier, M. Huther (Bureau Veritas Marine division)

FD13-38 Influence of weld defects on the fatigue resistance of thick steel plates, P. Schaumann, M. Collmann (Forwind-Center for Wind Energy Research, Institute for Steel Construction, Leibniz University Hannover)

12.45 - Lunch


FD13-20 Low Cycle Fatigue Behaviour of Butt-Welded Joints - Experiments and Numerical Simulations, E. Lang (TU Darmstadt), J. Rudolph (Areva NP GmbH), H. Th. Beier, M. Vormwald (TU Darmstadt)

FD13-46 Structural Stress FEA of Modalohr system for semi-trailer rail transportation: weld root fatigue focus, P. Klein, D. Turlier, J. Ober (Lohr Industry)

FD13-67 Fatigue tests of axially loaded butt welds up to very high cycles, P. Schaumann, S. Steppele (Institute for Steel Construction - Leibniz University Hannover)

FD13-104 A guideline for fatigue strength improvement of high strength steel welded structures using high frequency mechanical impact treatment, G. B. Marquis (Aalto University), Z. Barsoum (KTH-Royal Institute of Technology)



FD13-51 Low Cycle Fatigue crack propagation in a welded T-joint with a residual stress field, H. Minnebo, B. Leblé, P. Hamel (DCNS, DGA)

FD13-97 Use of martensitic stainless steel welding consumable to substantially improve the fatigue strength of low alloy steel welded structures, F. Scandella, N. Cavallin, P. Gressel, J. Haouas (Institut de Soudure), L. Jubin, F. Lefebvre, I. Huther (Cetim)

FD13-57 TIG-dressing of high strength steel butt welded connections - Part 2: physical testing and modelling, S.H.J. van Es, M.H. Kolstein (TU Delft), R.M.J. Pijpers (TNO, The Netherlands), F.S.K. Bijlaard (TU Delft)

FD13-125 Fatigue designed cl-cutting shape : a new economic steel-concrete connection system and some application for bridges, J. Berthellemy ((Setra/CTOA, Division des Grands Ouvrages et de l’Innovation)

18.45 - Dinner


11.15 - Vibration Fatigue behaviour S07-1

FD13-110 Fatigue of structures in mechanical vibratory environment. From mission profiling to fatigue life prediction., M. Bennebach, O. Bardou (Cetim)

FD13-107 Probabilistic Random Vibration Fatigue, B. Fouchez, J. Baussaron, T. Yalamas (Phimeca Engineering)

FD13-61 Multiaxial Load Situations in Random Vibration Fatigue - Phasing and Cross Correlation, M. Hack, F. Zingsheim (LMS International)

12.45 - Lunch

14.00 - Composites and elastomers fatigue behaviour S10-1

FD13-123 Rapid determination of the high cycle fatigue limite curve of carbon fiber epoxy matrix composite laminates by thermographic methodology, L. Gornet, O. Wesphal, P. Rozycki, L. Stainier (ECN)

FD13-16 Influence of the formulation of elastomers on their fatigue properties in crack growth, F. Rouillard, P. Dorey (LRCCP)

FD13-08 Low-cycle Fatigue of the light advanced materials, Ya. B. Unigovski, A.Grinberg, E.M. Gutman (Ben-Gurion University of the Negev)

FD13-41 Fatigue damage modelling of continuous glass fibre/epoxy composite, R. Ben Toumi, J. Renard (École des mines de Paris), M. Monin (PSA Peugeot Citroën), P. Nimdum (Ecole des mines de Paris)



FD13-45 Fast prediction of the fatigue behaviour from heat build-up measurements on short fibre reinforced thermoplastics, L. Serrano Abello, Y. Marco, V. Le Saux, P. Charrier, G. Robert (Ensta)

FD13-124 Fatigue in composite, J. Henry (Safran)

FD13-17 Damage of composite materials, C. Peyrac, F. Lefebvre, T. Jollivet (Cetim)

FD13-87 Multi-scale damage model for thermo-mechanical High Cycle Fatigue (HCF) of short glass fibre reinforced polyamide, A. Krairi, I. Doghri (Université Catholique de Louvain)

18.45 - Dinner


11.15 - Mechanical behaviour in contact Fatigue S11-1

FD13-30 Effects of residual stresses on rolling contact fatigue of railway wheels, A. Langueh, J.-F. Brunel, E. Charkaluk, P. Dufrenoy (Université de Lille Nord de France), F. Demilly (GHH Valdunes)

FD13-31 Modelling of surface initiated rolling contact fatigue damage, D. Hannes, B. Alfredsson (KTH Royal Institute of Technology)

FD13-94 X-FEM 3D crack propagation under rolling contact fatigue, B. Trollé, M.-C. Baietto, A. Gravouil (Insa Lyon - Lamcos), Si Hai Mai (SNCF)

12.45 - Lunch

14.00 - Fatigue crack propagation assessment S04-1

FD13-07 Accelerated Fatigue Crack Growth in 6082 T651 Aluminium Alloy Subjected to Periodic Underloads, M. Doré, S. Maddox (TWI)

FD13-13 Estimation of notch sensitivity and size effect on fatigue resistance, M. D. Chapetti, A. O. Guerrero Farro (University of Mar del Plata)

FD13-28 Numerical Simulation of the Total Service Life Time of Steel Constructions including Fracture Mechanic Concepts, G. Lener (Institut for Steel Construction, Universität Innsbruck)

FD13-93 Probabilistic prediction of fatigue life of cracked parts: a linear elastic fracture mechanics based approach, P. Boutet (Cetim), F. Hild (LMT), F. Lefebvre (Cetim)



FD13-96 Experimental Study of Crack Propagation Starting From Surface Defects in DA Inconel 718 Alloy, L. Doremus, Y. Nadot, G. Henaff (Institut P’), C. Mary (Snecma)

FD13-103 Crack path assessment under non-proportional loading, E. Wyart, A. Simon, H. Minnebo, F. Lani, T. Pardoen (Cenaero)

FD13-37 Experimental and numerical study for fatigue life prediction of bolted connection, M. Saranik, L. Jezequel, D. Lenoir (École Centrale de Lyon)

FD13-58 Design of Experiments using Variation Mode and Effect Analysis, K. Cronholm (Chalmers University of Technology)

18.45 - Dinner


11.15 - Fatigue damage mechanisms S08-1

FD13-25 On the fatigue reliability of hydroelectric Francis runners, M. Gagnon, A. Tahan, P. Bocher, D. Thibault (Institut de recherche d’Hydro-Québec - Ireq)

FD13-29 A conservative damage accumulation method for the prediction of crack nucleation under variable amplitude loading for austenitic stainless steel, S. Taheri (EDF), L. Vincent (CEA), J.-C. Le Roux (EDF)

FD13-48 Quest for fatigue limit prediction under multiaxial loading, J. Papuga (Czech Technical University in Prague)

12.45 - Lunch

14.00 - Complex loading and fatigue behaviour S05-1

FD13-12 Breathing-induced fatigue in thin-walled construction, M. Škaloud, M. Zornerová, S. Urushadze (The Institute of Theoretical and Applied Mechanics of Prague)

FD13-78 Multi parameter Fatigue Equivalent Loadings for specification applications, C. Roux, M.H. Maitournam, X. Lorang, M.-L. Nguyen-Tajan (SNCF)

FD13-98 Use of multi-scale approach for vehicle weight reduction study, R. Paquet, D. Lebaillif, L. Fouche-Sanseigne, E. Petitpas (Nexter Systems)

FD13-122 Modelling of hydrogen transport in rolling contact fatigue conditions , Yuri Kadin (SKF)


16.45 - Environmental effect and fatigue design S02-1

FD13-35 Influence of temperature and long term ageing on the fatigue crack growth in a precipitation - hardened martensitic stainless steels 15-5PH, L. Dimithe Aboumou, G. Henaff, M. Arzaghi (Institut P’), S. Pommier (LMT Cachan)

FD13-100 Short fatigue crack propagation in a low alloy steel under different environments, T.-H. Pham, V.-X. Tran (EDF)

FD13-32 Influence of a ground surface finish on the low cycle fatigue life of an austenitic stainless steel in different environments, T. Poulain, J. Mendez, G. Henaff (Institut P’), L. De Baglion (Areva NP)

FD13-10 High Cycle Thermal Fatigue Damage Prediction in Mixing Zones of Nuclear Power Plants: Engineering Issues Illustrated on the FATHER Case, S. Courtin (Areva)

18.45 - Dinner

9.00 - Reliability approaches in fatigue design S06-1

FD13-62 Risk based fatigue inspection planning - state of the art, T. Lassen (University of Agder, Faculty of Engineering and Science, Grimstad)

FD13-50 Probabilistic approach for the fatigue design of tower cranes, S. Bucas, P. Rumelhart, N. Gayton , A. Chateauneuf (Manitowoc Crane Group)

FD13-109 Reliability approach in fatigue for implant design, Y. Suchier, M. Chollet, I. Huther, F. Lefebvre (Cetim)



FD13-26 Detection of the Curves based on Lateral Acceleration using Hidden Markov Models, R. Maghsood (Chalmers University of Technology), P. Johannesson (SP Technical Research Institute of Sweden)

FD13-115 Turbine by-pass operation at the Les Bois hydropower station. Analysis of the mechanical fatigue behavior, M. Pillou, Ph. Bryla (EDF), M. Bennebach (Cetim)

FD13-79 Evaluation of the severity of fatigue loads on railway axles from in-service measurements, X. Lorang, J. Chen, C. Roux (SNCF)

12.45 - Lunch


FD13-09 Pile fatigue assessment during driving, J. Chung, R. Wallerand, M. Helias-Brault (Subsea 7)

FD13-82 Laplace processes for describing road profiles, P. Johannesson (SP Technical Research Institute of Sweden), I. Rychlik (Chalmers University of Technology)

FD13-101 Gradient fatigue multiaxial models, D.H. Luu, M.H. Maitournam, Q.S. Nguyen (LMS Polytechnique)

FD13-119 High frequency fatigue loading problems on Statoil risers and process pipework, Kenneth Macdonald (Statoil)



FD13-42 Assessment of surface hardening effects from hammer peening on high strength welded steels, C. Revilla-Gómez, C. Verdu, J.-Y. Buffiere (Insa de Lyon), C. Peyrac, F. Lefebvre (Cetim)

FD13-105 Fatigue strength of HFMI treated structures under high R-ratio and variable amplitude loading, E. Mikkola (Aalto University), M. Dore (TWI)

FD13-118 Diode laser weld toe re-melting as a means of fatigue strength improvement, C. Gerritsen, S. Vanrostenberghe, H. Ahmed (ArcelorMittal), M. Dore (TWI)



FD13-111 Residual stresses in welded components following various post-weld treatment methods, L. Suominen, J. Parantainen (Stresstech)

FD13-112 Fatigue strength improvement of welded structures using new Low Transformation Temperature filler materials, Z. Barsoum, A. Awais Bhatti, J. Larsson, V. van der Mee, T. Kannengiesser, A. Kromm (KTH, SSAB, Lincoln Electric, BAM)

FD13-113 Implementing High Frequency Mechanical Impact in industrial components: A case study, B. Jonsson, Y. Shin (Volvo Construction Equipment)

12.45 - Lunch

14.00 - Fatigue Testing S09

FD13-34 Characterization of fatigue damage in 304L steel by an acoustic emission method, A. Ould Amer, A-L. Gloanec (Ensta), S. Courtin (Areva NP)

FD13-44 Thermal measurements on elastomeric materials: from the characterization of the dissipation gradients to the prediction of the fatigue properties, I. Masquelier, Y. Marco, V. Le Saux, P. Charrier, S. Calloch, F. Rouillard (Ensta)

FD13-49 Experimental facility for high cycle thermal fatigue tests using laser shocks, L. Vincent, M. Poncelet, F. Hild, D. Farcage (CEA, LMT Cachan)

FD13-76 Fast fatigue properties identification by “self-heating” method: application to automotive welded joints, F. Pierrick (Ensta), M. L. Facchinetti (PSA Peugeot Citroën), C. Doudard, S. Calloch (Ensta)



FD13-33 Experimental analysis and modeling of the crack arrest condition under severe plastic fretting fatigue conditions, C. Gandiolle, S. Fouvry (Ecole Centrale de Lyon)

FD13-68 Characterisations of surfaces obtained by precision hard turning of AISI 52100 in relation to RCF life, N. Jouini, P. Revel (UTC), G. Thoquenne (Cetim)

FD13-71Prediction of the crack nucleation endurance of a Ti-6V-4Al alloy subjected to LCF / HCF Fretting Fatigue loadings: Influence of contact plastic accommodation and tensile/shear fatigue properties, R. Ferre, S. Fouvry, B. Berthel, J. A. Ruiz-Sabariego ((LTDS), École Centrale de Lyon)


11.15 - Manufacturing process and fatigue design S03-1

FD13-15 Effect of microstructure on the fatigue behaviour of a friction stirred channel aluminium alloy, C. Vidal, V. Infante, P. Vilaça (Technical University of Lisbon)

FD13-53 Influence of surface integrity of 15-5PH on the fatigue life, V. Chomienne, C. Verdu (Insa de Lyon), J. Rech (Énise)

FD13-54 Influence of the base material strength and edge preparation on the fatigue strength of the structures made by high and ultra high strength steels, R. Laitinen, I. Valkonen and J. Kömi (Ruukki Metals Oy)

12.45 - Lunch


FD13-75 A new methodology for designing heat treated components in fatigue, B. Abrivard, F. Morel, E. Pessard, P. Delhaye (Arts et Métiers Angers)

FD13-91 Fatigue behaviour of crankshafts, A. Galtier (Ascometal)

FD13-99 Fatigue life model for 7050 chromic anodized aluminium alloy, M. Chaussumier (ISAE)

FD13-102 Influence of DEFect on the FAtigue behaviour of As7g06T6 aeRonautical alloy (IDEFFAAR), Y. Nadot, A. Chabaud, I. Serrano Mura, P. Mu (Institut P’), C. Verdu, J.Y. Buffiere (Insa de Lyon), P. Emile, C. Richard, L. Anssems (Institut P’)



FD13-63 High-cycle fatigue life prediction of isotropic viscoelastic-viscoplatic homogeneous solids using two-scale time homogenization, S. Haouala, I. Doghri (Université catholique de louvain)

FD13-72 Fatigue damage assessment of alternator fans by EBSD, F. Léaux, J. Bouquerel, J.-B. Vogt, F. Palleschi (Université Lille 1)

FD13-81Very High Cycle Fatigue for single phase ductile materials: slip band appearance criterion, N. Lam Phung, N. Marti, A. Blanche, N. Ranc, V. Favier*, A. Chrysochoos, N. Saintier, C. Wang, D. Wagner, C. Bathias, F. Grégori, B. Bacroix, H. Mughrabi, G. Thoquenne (Disfat project, ANR blanc, Arts et Métiers ParisTech*, …)


11.15 - Vibration fatigue behaviour S07-2

FD13-59 Time Domain Analysis Method of the Impulse Vibro-Acoustic Signal for Fatigue Strength Characterisation of Metallic Material, M. Zaki Nuawi, A. R. Bahari, S. Abdullah, A. Kamal Ariffin Mohd Ihsan (The National University of Malaysia)

FD13-60 Defining Representative Dynamic Environmental Tests using Mission Synthesis, A. Carrella, J. Debille, F. Presa (LMS), Khelifi (Nexter)

FD13-83 Vibration fatigue and simulation of damage on shaker table tests: the influence of clipping the random drive signal, F. Kihm (HBMnCode), D. Delaux (Valeo), N. Ferguson (University of Southampton)

12.45 - Lunch


FD13-65 The effect of aqueous corrosion on the high cycle fatigue strength of an aeronautical martensitic stainless steel X12CrNiMoV12-3, M. El May, T. Palin-Luc, N. Saintier (Arts et Métiers ParisTech - Bordeaux), O. Devos (Université de Bordeaux)

FD13-88 Influence of anodizing process on surface integrity and fatigue resistance of Ti-6Al-4V alloys, E. Vermesse, L. Arurault, C. Mabru (Institut Clément Ader, ISAE, Toulouse)

FD13-89 Fatigue Crack Propagation in a New Generation Al-Cu-Li Alloy, C. Sarrazin-Baudoux, J. Petit, S. Richard (Institut P’)

FD13-90 Thermo-mechanical fatigue tests for evaluation of materials, M. Collignon, G. Regheere, A.-L. Cristol (CTIF)

16.00 - Coffee Break 5432








12.45 - Lunch





FD13-104A guideline for fatigue strength improvement of high strength steel welded structures using high frequency mechanical impact treatment, G. B. Marquisa,b,*, Z. Barsoumb (aAalto University, School of Engineering, Espoo, 00076, FinlandKTH-Royal Institute of Technology, Division of Lightweight Structures, Stockholm, 100 44, Sweden)







18.45 - Dinner






12.45 - Lunch












18.45 - Dinner






12.45 - Lunch












18.45 - Dinner






12.45 - Lunch












18.45 - Dinner










12.45 - Lunch
















12.45 - Lunch








FD13-33 Development and modelling of a non collinear fretting fatigue test: comparison of multiaxial fatigue criteria to predict the crack nucleation conditions, C. Gandiolle, S. Fouvry (Ecole Centrale de Lyon)








12.45 - Lunch
















12.45 - Lunch














12.45 - Lunch












18.45 - Dinner






12.45 - Lunch












18.45 - Dinner






12.45 - Lunch


FD13-07 The Effect of Simple Load Sequences on Fatigue Crack Growth Rate Acceleration, M. Doré, S. Maddox (TWI)









FD13-58 Design of Experiments using Variation Mode and Effect Analysis, K. Cronholm (?)

18.45 - Dinner






12.45 - Lunch












18.45 - Dinner










12.45 - Lunch
















12.45 - Lunch








FD13-33 Development and modelling of a non collinear fretting fatigue test: comparison of multiaxial fatigue criteria to predict the crack nucleation conditions, C. Gandiolle, S. Fouvry (Ecole Centrale de Lyon)








12.45 - Lunch
















12.45 - Lunch














12.45 - Lunch












18.45 - Dinner






12.45 - Lunch












18.45 - Dinner






12.45 - Lunch












18.45 - Dinner






12.45 - Lunch












18.45 - Dinner










12.45 - Lunch
















12.45 - Lunch








FD13-33 Experimental analysis and modeling of the crack arrest condition under severe plastic fretting fatigue conditions, C. Gandiolle, S. Fouvry (Ecole Centrale de Lyon)








12.45 - Lunch
















12.45 - Lunch







1304

-044

- C

réd

it p

ho

tos

: ©C

itro

ën C

om

mu

nic

atio

n, L

aure

nt

Niv

alle

, Ch

arle

s A

nto

ine

d’A

uti

cham

p, A

lan

Mo

rel –

Fo

tolia

: ©

bar

lest

- ©

fder

ib -

©vl

aru

5th edition of the International conference on fatigue design

27 and 28 November 2013 - Senlis, France

www.fatiguedesign.org

CommitteesOrganisational committee:

M. Afzali (Cetim), F. Lefebvre (Cetim), I. Huther (Cetim), M. Risbet-Voitot (UTC), M. Lukic (CTICM), A. Bignonnet (AB consulting), A. Galtier (Ascometal CREAS), H.-P Lieurade (SF2M), J. Bernard Vogt (ENSCL), S. Calloch (Ensta), F. Morel (Arts et Métiers ParisTech), É. Charkaluk (École Centrale de Lille), L. Flacelière (Total), V. Aubin, (École Centrale de Paris), J. Choné (SF2M), S. Courtin (Areva), S. Fouvry (École Centrale de Lyon), A. Koster (École des Mines de Paris), M. Nguyen (SNCF), L. Rémy (École des Mines de Paris), F. Rezaï-Aria (École des Mines d’Albi), J.-L. Robert (IUT de Montluçon), F. Szmytka (PSA).

International technical committee:

J.A. Araújo (Brasil), M. Bacher-Hoechst (Germany), M. Brune (Germany), J.-Y. Buffière (France), M. Browne (United Kingdom), D. McDowell (USA), L. Dunai (Hungary), A. Fatemi (USA), W. Fricke (Germany), N. Gubeljak (Slovenia), G. Glinka (Canada), P. Haagensen (Norway), A. Hobbacher (Germany), K. Yamada (Japan), M. Kocak (Turkey), M. Lemaire (France), S.J. Maddox (United Kingdom), T. Lassen (Norway), J. Lu (Hong-Kong), A. Magnée (Belgium), H. Maitournam (France), G. Marquis (Finland), A. Nussbaumer (Switzerland), M. Prager (USA), W. Salvatore (Italy), J. Samuelsson (Sweden), M. Sonsino (Germany), A. Spagnoli (Italy), T. Svensson (Sweden), S. Walbridge (Canada).

M Social event: New in 2013Gala evening at the “Parc Astérix”: privatization of an attraction and dinner at the restaurant “Le Cirque” at the heart of the park.

M Access - 52 avenue Félix-Louat, 60300 Senlis, France.• Travellingbycar:motorwayA1exitn°8(Senlis).

• TocomefromtheinternationalAirportRoissyCharlesdeGaulle(CDG)orbytheTGVstation(RoissyCDG):

– Shuttles ”Cetim : Fatigue Design” – Taxi, 15 / 20 minutes, 40 / 50 euros.

• TocomefromOrlyAirport,firstjointheRoissyCDGAirportbyaninterairportshuttle.

M AccomodationAll usefull informations are on www.fatiguedesign.org. Dedicated shuttle services will be organised between the hotels and the conference site.

Partnerships

Wednesday 27 November Room 6

8.30 - Opening statement

Philippe Choderlos de Laclos, General Manager, Cetim, France

Mansour Afzali, Scientific Advisor, Cetim, France


FD13-K01 Assessment of existing steel structures - Recommendations for estimation of the remaining fatigue life, B. Kühn (Verheyen-Ingenieur, Netherland)

FD13-K02 Laplace moving average model for multi-axial responses in fatigue analysis of a cultivator, I. Rychlik (Chalmers University of technology, Sweden)

FD13-K03 Fatigue in the electronics industry: fatigue of solder joints in electronic cards, W. Maia-Filho (Thales, France)


FD13-K04 Fatigue Damage Modeling of Composite Structures, M. Kaminski (Onera, France)

FD13-K05 Reliable fatigue design, by rigid rules, by magic or by enlightened engineering, T. Svensson (SP Technical Research Institute of Sweden)

FD13-K06 Assessment of very high cycle fatigue (VHCF) effects in practical applications, M. Bacher-Hoechst, S. Issler (Robert Bosch GmbH, Corporate Sector Research and Advance Engineering, Germany)

Thursday 28 November Room 6

Les organisateurs se réservent le droit de modifier le présent programme en cas de nécessité.

Contact

[email protected]:+33(0)344673682www.fatiguedesign.org

The Fifth Fatigue Design 2013 conference aims to present the most innovative approaches and scientific progress in design methodologies, tools, and equipment’s life extension, focusing on industrial applications.

300 participants from the mechanical engineering, transport, energy, building and public works industries are expected.

To facilitate exchanges among participants, in addition to the two days of lectures, there will be:

- a poster exhibition (Candidature opened until juin 20th),

- a technological showcase featuring exhibits by service providers and technology suppliers.

Publisher of the Fatigue Design 2013

proceedings

6 7 8

5 edition of the International conference on fatigue design · 16.45 - Welded components and...

Documents

Transcript of 5 edition of the International conference on fatigue design · 16.45 - Welded components and...