5-1

G l i d i n g W i n d o w s

A R C H I T E C T U R A L D E T A I L F I L ER E V . 0 3 / 0 5

Contents

Gliding Window

Basic Unit Details ............................................................5-2

Options / Accessories ......................................................5-3

Extension Jambs .......................................................5-3

Andersen® Grilles .......................................................5-4

Joining Details .................................................................5-5

Anchoring Methods ..........................................................5-6

Suggested Product Applications .......................................5-7

• Natural wood interior

• Smooth, easy operation

• Adjustable self-lubricating glides

• Low-maintenance, durable exterior

5-2

G l i d i n g W i n d o w s

A R C H I T E C T U R A L D E T A I L F I L E R E V . 0 3 / 0 5

Basic Unit Details

Horizontal Section

Vertical Section

Basic UnitScale 3" = 1'-0" (1:4)

4-1/8" (110)3" (76) 3" (76)

1-1/8"(29)

1-1/8"(29)

4-9/16" (116)

1-5/16" (33)

3/8" (10)

Clear Opening Width

Rough Opening Width

3/8" (10)Unit Dimension Width

Jamb JambMeeting Stile

1-5/16"(33)

1-15/16"(49)

4-3/8" (111)

1-9/16" (40)

3-3/4" (95)

4-9/16"(116)

Roug

h Op

enin

g He

ight

Clea

r Ope

ning

Hei

ght

Unit

Dim

ensi

on H

eigh

t2-5/16"

(59)

2-13/16"(72)

3/8"(10)

3/8"(10)

Head

Sill

5-3

G l i d i n g W i n d o w s

A R C H I T E C T U R A L D E T A I L F I L ER E V . 0 3 / 0 5

Options / Accessories

Extension jambsScale 3" = 1'-0" (1:4)

Vertical Section

Extension jambs are available for 5-1/4" (133), 6-9/16" (167), and 7-1/8" (181) wall thickness. Other wall dimensions can be accommodated with stool and extension jamb modification. Extension jambs are pre-drilled for easy application, except for 5-1/4" (133) size.

Sill

Jamb

Head

7-1/8" (181) Wall

6-9/16" (167) Wall

5-1/4" (133) Wall

23/32" (18)

7-1/8" (181)

6-9/16" (167)

5- 1/4" (133)

7-1/8" (181)

6-9/16" (167)

5- 1/4" (133)

2-1/32" (52)

3-1/32" (77)

Extension Jambs

5-4

G l i d i n g W i n d o w s

A R C H I T E C T U R A L D E T A I L F I L E R E V . 0 3 / 0 5

Options / Accessories

Andersen® Divided Light Grille

White

Sandtone

Terratone®

Forest Green

3/4"

7/8"

1-1/8"

2-1/4"

With Spacer

Without Spacer

Maple

Oak

Prefinished

Pine

Colonial

Modified Colonial

Modified Col W/Check Rail

Prairie A

Short Fractional

Short Fractional W/Check Rail

Tall Fractional

Tall Fractional W/Check Rail

Victorian

Renaissance

Sunburst

Specified Equal Light

Custom

HP/HP Tempered

HP Sun/HP Sun Temp

3/8" Low-E/Temp

Single-Pane Impact

Available now

Available only with 3/8" glass through the Andersen Divided Light program

Please check with Andersen for availability

Andersen®400 Series Windows

Gla

ss

Patt

erns

In

terio

r Ty

pe

Wid

th

Exte

rior C

olor

Andersen®400 Series Doors

Case

men

t & A

wnin

g

Case

men

t Pic

ture

Win

dow

Glid

ing

Win

dow

Woo

dwrig

ht®

Doub

le-H

ung

& Tr

anso

m

Woo

dwrig

ht®

Pict

ure

Win

dow

Woo

dwrig

ht®

Arch

top

& U

nequ

al L

eg A

rcht

op

Woo

dwrig

ht®

Sprin

glin

e™ S

ingl

e-Hu

ng

Tilt-

Was

h Do

uble

-Hun

g &

Tran

som

Tilt-

Was

h Pi

ctur

e W

indo

w

Circ

le To

p™ &

Qua

rter R

ound

Arch

Sprin

glin

e™

Flex

ifram

e®

Ellip

tical

Circ

le &

Ova

l

Goth

ic

200

Serie

s Na

rrolin

e® D

oubl

e-Hu

ng &

Tran

som

Fren

chwo

od®

Glid

ing

Fren

chwo

od®

Hing

ed In

swin

g

Fren

chwo

od®

Hing

ed O

utsw

ing

Fren

chwo

od®

Patio

Doo

r Sid

elig

hts &

Tran

som

s

5-5

G l i d i n g W i n d o w s

A R C H I T E C T U R A L D E T A I L F I L ER E V . 0 3 / 0 5

Andersen® Divided Light GrillePermanent ExteriorPermanent Interiorwith Spacer

Andersen® Divided Light GrillePermanent ExteriorPermanent Interior

Andersen® Divided Light GrillePermanent ExteriorRemovable Interior

RemovableInterior

Andersen® Finelight™Grilles-Between-the-Glass

3/32"

5/16"

5/16" 7/16"

7/16"

45˚

2-1/4"

53˚3/8"3/8"3/8" 53˚

7/8"

45˚45˚

3/4"

53˚ 35˚

1-1/8"

35˚

1/2"

1-13/16"

5/16" 7/16"

2-1/4"7/8"3/4" 1-1/8"

1/2"

7/8"3/4" 1-1/8"

1/2" 1-13/16"

5/16"5/16"5/16"

3/16"1/8" 5/16"

1/2"

1/8"

1/2" 1/2" 1/2" 1/2"

Permanent Exterior Fibrex® Material Grille Profiles (chamfer profile). Also used for pre-finished interior, except 400 Series Woodwright® double-hung windows.

Permanent Interior Wood Grille Profiles (chamfer profile).The Fibrex® material exterior grille is used when a permanent prefinished grille is specified, except with 400 Series Woodwright® double-hung windows.

Removable Interior Wood Grille Profile (roman ogee profile). Removable Interior Wood Grille Profile (Chamfer profile).400 Series Woodwright® double-hung windows only.

Permanent Full Divided Light Grille spacer location.

Andersen® Finelight™ Grilles-Between-the-Glass.

7/16"

7/8"3/4" 1-1/8"

3/8"

3/4"

1/2"

1"

Options / Accessories

Grille Profiles • Scale = Full • Dimensions include thickness of tape.

400 Series Grille Options

5-6

G l i d i n g W i n d o w s

A R C H I T E C T U R A L D E T A I L F I L E R E V . 0 3 / 0 5

Andersen® Joining MaterialsScale 3" = 1'-0" (1:4)

Andersen® Non-ReinforcedWood Mullion

Joining Details

2" Support Mullion

3/16" (5)

3" (76) 3" (76)3/16" (5)

1-1/8"(29)

1-1/8"(29)

Optional Andersen®

2" wood casing

Jamb JambOptional Andersen® exterior vinyl trim strip set in continuous bead of sealant each side

Optional Andersen®

non-reinforced wood join

1-1/8"(29)

1-1/8"(29)

2" (51)

2" (51)

3" (76)3" (76)

Jamb Jamb

Structural supportby others

Casing by others

Optional Andersen®

2" support mullionwood filler

Optional Andersen®

2" support mulliontrim strip set in continuous bead of sealant each side

Joining Compatibilty Many Andersen® units are designed to be joined with other Andersen units in a variety of non-reinforced and reinforced combinations. Other combination types and joining methods can be viewed in the Andersen® Product Guide for Professionals, in Andersen Window Studio® software, and by visiting www.andersenwindows.com. Combination designs should always be checked for design pressure performance requirements to ensure the appropriate joining method is specified.

5-7

G l i d i n g W i n d o w s

A R C H I T E C T U R A L D E T A I L F I L ER E V . 0 3 / 0 5

Anchoring Methods

Installation FlangeScale 3" = 1'-0" (1:4)

Threaded Masonr y Fastener / Expansion SleeveScale 3" = 1'-0" (1:4)

Jamb ClipScale 3" = 1'-0" (1:4)

4-9/16" (116)

Installation flange

Exterior sheathing

Threaded masonryfasteners and shimsby others

Wood buck by others

Optional Andersen®

jamb clip

Optional Andersen® auxiliary casing

Gliding window unit is secured in opening using threaded fasteners through the installation flange.

Gliding window unit is secured in opening using threaded masonry fasteners. Pre-drill through side jambs for fastener installation.

Gliding window unit secured in opening by others using Andersen® 302 stainless steel sheet metal jamb clips and stainless steel screws. Bend jamb clips to secure unit fit in opening. Installation flange can be cut as required to accommodate jamb clips.

APPLICATION:

• First secure jamb clip to back side of window unit jamb(s)

• Apply 1' from corners of head jamb, sill and side jambs

• Space jamb clips evenly (maximum distance apart 32" on center)

• Jamb clip lateral design load capacity: maximum 200 lb.

Score markings for bending

3/16"(5)

1-1/2"(38)

3"(76)

4-1/8"(105)

Standard Installation Flange Reversed

Make sure that the unit frame parts do not become bowed when using

anchoring methods. Unit will not operate properly if frame parts are stressed.

5-8

G l i d i n g W i n d o w s

A R C H I T E C T U R A L D E T A I L F I L E R E V . 0 3 / 0 5

Wall TypesScale 1-1/2" = 1'-0" (1:8)

Suggested Product Applications

Vertical SectionBrick Veneer / 2 x 6" Metal Stud Framing

Vertical SectionWood Siding / 2 x 4 Wood Stud Framing

Vertical SectionE.I.F.S. / Concrete Masonr y Unit (CMU)

Roug

h Op

enin

g He

ight

Unit

Dim

ensi

on H

eigh

t

Rgh.

Opg

.W

idth

1/4"(6)

Unit

Dim

.W

idth

Sill

Jamb

Head

Installationflangeall around

Installationflange all around

Head

Jamb

Sill

Unit

Dim

ensi

on H

eigh

t

Roug

h Op

enin

g He

ight

Rgh.

Opg

.W

idth

1/4"(6)

Unit

Dim

.W

idth

*1/2" (13) minimum to accommodate differential shrinkage/expansion when brick is used with wood framing.

1/2" (13)*minimum

Removeinstallationflangeat head

Unit

Dim

ensi

on H

eigh

t

Roug

h Op

enin

g He

ight

Rgh.

Opg

.W

idth

Unit

Dim

.W

i dth

1/4"(6)

Installationflange allaround

Head

Jamb

Sill

Membrane flashing over installationflange(by others)

Importance of Proper InstallationProper installation and maintenance of Andersen® products are essential if optimum performance is to be fully attained. Written installation instructions which provide guidelines for proper installation are available for Andersen products from your local Andersen supplier or by writing to: Andersen Windows, Inc., Box 12, Bayport, MN 55003 or by visiting our website at www.andersenwindows.com. Remember that every installation is different. Andersen strongly recommends consultation with an Andersen product representative and with an experienced contractor, architect, or structural engineer prior to the installation of any Andersen product. Installation of Andersen products, including method of attachment, fastener selection, and code compliance is the sole responsibility of the architect, building owner, contractor, and/or consumer.

Construction by OthersAndersen Corporation is not responsible for the design of, conditions in, or performance of, adjacent wall or roof construction beyond the perimeter of the Andersen units. Proper integration of the Andersen units with the weather-repellent system of the building is the responsibility of others.

NOTE: Where E.I.F.S. wall finish is adjacent to window units, contact E.I.F.S. manufacturer for installation instructions, including the use of appropriate flashing, the proper use of sealant and backer rod, and the

proper width of sealant joint around the perimeter of the window.

NOTE: Leave adequate clearance between sill and masonry for caulking and dimensional change of framework. Installation flange may be removed where construction sequence/detailing requires no flange.

5-9

G l i d i n g W i n d o w s

A R C H I T E C T U R A L D E T A I L F I L ER E V . 0 3 / 0 5

Suggested Product Applications

Wall Types Scale 1-1/2" = 1'-0" (1:8)

Vertical SectionBrick / Concrete Masonr y Unit (CMU)

Vertical SectionStucco / Concrete Masonr y Unit

(CMU) Inset Window

Vertical SectionExisting Stud Wall

Vertical SectionExisting Masonr y Wall

Roug

h Op

enin

g He

ight

Unit

Dim

ensi

on H

eigh

t

1/4" (6)

Unit

Dim

.W

idth

Rgh.

Opg

.W

idth

Jamb

Head

Sill

Optional Andersen®

auxiliarycasing

Installationflangeall around

Head

Jamb

Optional Andersen®

auxiliarycasing

Sill

Unit

Dim

ensi

on H

eigh

t

Installationflange at headand jambs

Roug

h Op

enin

g He

ight

Removeinstallationflangeat sill

1/4"(6)

Unit

Dim

.W

idth

Rgh.

Opg

.W

idth

Unit

Dim

ensi

on H

eigh

t

Roug

h Op

enin

g He

ight

Rgh.

Opg

.W

idth

1/4"(6)

Unit

Dim

.W

idth

Optional Andersen®

vinyl trim board

Existingframe wall

Installationflangeall around

Head

Jamb

Sill

Roug

h Op

enin

g He

ight

Unit

Dim

ensi

on H

eigh

t

1/4"(6)

Unit

Dim

.W

idth

Rgh.

Opg

.W

idth

Existing masonry wall

Optional Andersenextension jambstrimmed to fit

Installationflange all around

Jamb

Head

Sill

Optional Andersen®

vinyl trimboard.Trim to fitas required.Finish trimmededge with Optional Andersen®

rigid vinylchannel

Importance of Proper InstallationProper installation and maintenance of Andersen® products are essential if optimum performance is to be fully attained. Written installation instructions which provide guidelines for proper installation are available for Andersen products from your local Andersen supplier or by writing to: Andersen Windows, Inc., Box 12, Bayport, MN 55003 or by visiting our website at www.andersenwindows.com. Remember that every installation is different. Andersen strongly recommends consultation with an Andersen product representative and with an experienced contractor, architect, or structural engineer prior to the installation of any Andersen product. Installation of Andersen products, including method of attachment, fastener selection, and code compliance is the sole responsibility of the architect, building owner, contractor, and/or consumer.

Construction by OthersAndersen Corporation is not responsible for the design of, conditions in, or performance of, adjacent wall or roof construction beyond the perimeter of the Andersen units. Proper integration of the Andersen units with the weather-repellent system of the building is the responsibility of others.

NOTE: Where E.I.F.S. wall finish is adjacent to window units, contact E.I.F.S. manufacturer for installation instructions, including the use of appropriate flashing, the proper use of sealant and backer rod, and the

proper width of sealant joint around the perimeter of the window.

NOTE: Leave adequate clearance between sill and masonry for caulking and dimensional change of framework. Installation flange may be removed where construction sequence/detailing requires no flange.