38 Techpack

Product: Men’s Semi Formal Shirt

Brand: Oxemberg

Manufacturer: Siyaram’s

Manufacturing: InHouse

1. SPECIFICATION OF THE PRODUCT

Product - Men’s semi formal shirt

Brand – Oxemberg

Manufacturer – Siyaram’s

Manufacturing – In House

STYLE FOLDERBrand Oxember

gSeason Summer New/Repeat Ne

wStyle # Style Name DesignerPattern # Sample Size 42/L Textile DesignerCompany Siyaram’s Size Range 38-46 Technical

DesignerFabric Cotton Product

TypeMen Production

ManagerGarment Description

Formal Shirt

Garment Wash

Urban Wash

Prepared By

FABRIC DETAILSType Material Weav

eDesign

Color

Shell Fabric

100%cotton

Plain Stripe Pantone4695UPantone-536MPantone-0601TPX

Under collar band

Cotton Solid White

Yoke patch

Cotton Solid white

THREAD DETAILSType Material ColorMain thread Cotton BlackSecond thread Cotton WhiteSecond thread Cotton Brown

BUTTONS DETAILSType Material Color Lignes4 Hole sew-through button

Plastic Transparent with white base

20

Snap Button Metal Metallic 15Snap Button Metal Metallic 18

OTHER TRIMS DETAILSType Material Color MeasurementTape Red and white 1 ¼”x ¼”Tape Brown, red and

black16 3/4”x 3/8”

STYLE FOLDER – MEASUREMENT DETAILSDESCRIPTION 40/L TOLERAN

CECOMMENTS

Body Length – From CB Neck 30” + ½

Chest Circumference 44” + ½Waist Circumference 42” + ½Bottom Circumference 44” + ½Across Shoulder(Seam To Seam) 18” + ½Shoulder Slope 57/8” + 1/8Across Back 7” Down From HPS 17½” + 1/4Yoke Height @ CB Neck 4 ½” + 1/8Sleeve Length 26” + ½Armhole Circumference 20” + 1/4Sleeve Cap Height 4 ½” + 1/8Bicep – 1” Below Armhole 17” + 1/4Forearm – 5” Below Cuff Seam 12” + 1/4Cuff Height 3¼” + 1/8Cuff Length 9¾” + 1/8Cuff Height Chamfering – Each Side 1” + 1/8Cuff Length Chamfering – Each Side ¾” + 1/8Sleeve Placket Length – Pointed End 6 ½” + 1/8Sleeve Placket Width 7/8” + 1/8Front Neck Drop 3” + 1/8Back Neck Width(Seam To Seam) 8” + 1/4Collar Height @ CB Neck 17/8” + 1/8Collar Stand Height @ CB Neck 11/4” + 1/8Collar Stand Height @ CF Neck 1” + 1/8Collar Length Along Seam (V To V) 15

¼”+ 1/4

Collar Band Circumference From Center Of Button To End Of Buttonholes

15 ½”

+ 1/4

Outside Collar Edge Length 163/8”

+ 1/4

Tie Space 4” + 1/8Collar Point Length 31/8” + 1/8Bottom Hem Height ¼” + 1/8Button Spacing – Neck Seam To 1st Button 2½” + 1/8Button Spacing – Balance Of Button 3½” + 1/8Total # Of Front Buttons 7 + 1/8Chest Pocket Position From Shoulder Stitch 8” + 1/8Chest Pocket Position From CF 2” + 1/8Chest Pocket Hem Height ½” + 1/8Chest Pocket Length 5¼” + 1/8Chest Pocket Width 5” + 1/8

CONSTRUCTION DETAILSOpp. No.

Operation components involved

Stitch type

Seam type

Machine required

Front operations1. Sew front

placket to left front

Front placket, left front, interlining

401 Lapped seam

DNCS m/c with folder

2. Saddle stitch right front at 1/8” from CF

Right front 205 Decorative seam

3. Button placket edge finish with wash care label

Right front 301 Edge neatening seam

SNLS m/c

4. Attach style label to right front placket

Right front, style label

301 Lapped seam

SNLS m/c

5. Stitch the dart on right front

Right front 301 Superimposed seam

SNLS m/c

6. Top stitch the dart at 3/16” and ¼”

Right front 301 Superimposed seam

SNLS m/c

7. Stitch the dart on left front

Left front 301 Superimposed seam

SNLS m/c

8. Top stitch the dart at 3/16” and ¼”

Left front 301 Superimposed seam

SNLS m/c

9. Left pocket top hem of ½” width

Left pocket 301 Edge neatening seam

SNLS m/c

10. Bottom stitch on left pocket

Left pocket, pocket

301 Button stitch machine

11. Pocket attachment to left front with 2 stitches at 3/16” and ¼” from the edge

Left front, left pocket

301 Lapped seam

SNLS m/c

12. Right pocket top hem of ½” width

Right pocket

301 Edge neatening seam

SNLS m/c

13. Button stitch on right pocket

Right pocket, button

301 Button stitch m/c

14. Pocket attachment to right front with 2 stitches at 3/16” and ¼”

Right front, right pocket

301 Lapped seam

SNLS m/c

15. Right pocket Right flap 301 Superimpo SNLS m/c

CUFF OPERATIONS35.

Fell left upper cuff edge

Left upper cuff


SNLS m/c

36.

Form left sleeve cuff (run stitch & turn)

Cuff pieces

301 Superimposed seam

SNLS m/c

37.

Fell right upper cuff edge

Right upper cuff


SNLS m/c

38.

Form right sleeve (run stitch & turn)

Cuff pieces


SNLS m/c

COLLAR OPERATIONS39.

Form collar(run stitch, turn & topstitch)

Collar pieces


SNLS m/c

40.

Fell fused collar band edge

Fused collar band piece


SNLS m/c

41.

Attach tape to inner collar band

Inner collar band & tape

301 Lapped seam

SNLS m/c

42.

Attach collar to collar band

Collar & collar band pieces


SNLS m/c

43.

Turn & topstitch collar band upper edge at ¼”

Collar 301 Superimposed seam

SNLS m/c

ASSEMBLY OPERATIONS44.

Attach left shoulder Left front & back

301 French seam SNLS m/c

45.

Attach right shoulder Right front and body

301 French seam SNLS m/c

46.

Attach left sleeve to body

Body & left sleeve

301 Lapped seam

SNLS m/c

47.

Topstitch at 3/16” & ¼” from edge

Body 301 Lapped seam

SNLS m/c

48.

Attach right sleeve to body

Body & right sleeve

301 Lapped seam

SNLS m/c

49.

Topstitch at 3/16” & ¼” from edge

Body 301 Lapped seam

SNLS m/c

50.

Feed of the arm Body 401 Lapped seam

DNCS m/c with folder

51.

Hem bottom Body 301 Edge neatening seam

SNLS m/c

52.

Sew collar to body Body & collar

301 Bound seam SNLS m/c

53.

Topstitch collar band Body 301 Superimposed seam

SNLS m/c

54.

Attach tape to collar band

Body & tape

301 Lapped seam

SNLS m/c

55.

Attach left cuff to body

Body & left cuff


56.

Topstitch left cuff Body 301 Superimposed seam

SNLS m/c

57.

Attach right cuff to body

Body & right cuff


58.

Topstitch right cuff Body 301 Superimposed seam

SNLS m/c

59.

Sew buttonholes on CF Buttonhole placket

Body 101 Buttonhole m/c

60.

Sew buttons on CF button placket

Body 301 Buttonstitch m/c

61.

Snap button riveting on CF, cuffs & sleeve placket

Body Riveting m/c

PLACEMENT OF TRIMS

MAIN LABEL

STYLE LABEL CARE LABEL

TAPE TAPE SNAP BUTTON

Size : 2 ¾” X 2”

Size : ¾” X 3 ½”

Size : ¾” X 1

Size : ¼” X 1 ¼”

Size : 3/8” X 16 ¾”

Size : 18 lignes

Position:¾” below centre back neck

Position:1 3/8” above hem on right front placket

Position:5 ¾” above hem inside right front placket

Position:Middle of collar band

Position:Along the neckline on collar band

Position:Second buttor on centre front

PACKAGING DETAILS

DESCRIPTION

CLEAR BAG AT THE BOTTOM

POLY BAG LABEL

Placement : garment left topColour: white

STYLE # SIZE # COLOR #

FRONT OF THE BAG

LOCATE POLY BAG LABEL AT GARMENT TOP LEFT

BACK OF THE BAG

SUFFOCATION WARNING PRINTED ON BAG IN ENGLISH

WARNINGTo avoid SUFFOCATION, keep this

bag away from babies and children, do not use in cribs, carriages, and

playpens. The this film may cling to nose and mouth and prevent

breathing.

**NOTE: All buttons must be fastened before packing.

CARTOON PACKING

Flat pack garment in the carton box provided.

SAMPLES

Following are the samples that are mentioned in the sample programming sheet:

• Proto sample : This is applicable for the styles which are made without any prior samples presented to buyer. This sample is sent to confirm the styling and stitching procedure. In most case the samples is sent before salesman sample and order confirmation.

• Fit approval sample : Once the Proto is approved, the buyer shall be provided with Fit Approval Sample. This sample is made from actual fabric mentioned in Tech-pack, but could be in any color and available trims.

• Size Set Sample : Once the Fit sample is approved, Size set sample is sent to visualize the grading between sizes, as required by the customer. For some

buyers, the Size Set will be reviewed after Pre-production sample approval by their nominated agents.

• GPT Sample (Garment Performance Test) : These are made from the bulk fabric/trims, and sent for approval to the third party (Bureau Veritas, Bangalore).

• Pre Production Sample : On approval of the Fit Sample or Size Set Sample, Pre-production samples are sent to customers, which is actual in all aspects of bulk fabric, trims, folding and packing. After receiving the comments, two samples are sent to production through PPC for production and follow up.

SAMPLE PROGRAMMING SHEET

INDENT DATE

BRAND

STYLE #

SAMPLE TYPE

FABRIC TYPE

SEASON

DELIVERY DATE

QUANTITY

SIZE

22-4-2011

Oxemberg

S1234

Proto Sample

100%cotton stripe

Autumn-Winter 2011

30-04-2011

1 M

1-05-2011

Oxemberg

S1235

Fit approval sample

100%cotton stripe

Autumn-Winter 2012

07-05-2011

1 M

8-05-2011

Oxemberg

S1236

Size Set sample

100%cotton stripe

Autumn-Winter 2013

14-05-2011

4 S,M,L, XL

21-6-2011

Oxemberg

S1237

Garment Performance Test Sample

100%cotton stripe

Autumn-Winter 2014

30-06-2011

1 S

1-07-2011

Oxemberg

S1238

Pre production sample

100%cotton stripe

Autumn-Winter 2015

07-07-2011

3 M

38 Techpack

Documents

Transcript of 38 Techpack