3 Dynatel .Advanced.Modular.System. 965AMS.VDSL2.Service...

October 200778-8135-7673-9

Future-Proof Testing Platform

3Dynatel™.Advanced.Modular.System.965AMS.VDSL2.Service.Module.User’s.Guide

3M™ Dynatel™ Advanced Modular System 965AMS VDSL2 Service Module User’s Guide

ContentsVDSL2 Service Module ....................................................................5Introduction................................................................................................5Module.Installation....................................................................................6RJ-45.Adapter.Installation.........................................................................8

Network Setups ...............................................................................9ATM.Transport.Setup.................................................................................9WAN.Setup..............................................................................................12LAN.Setup...............................................................................................17Ping.Setup................................................................................................20

xDSL Functions ..............................................................................23Details.(xDSL).........................................................................................23

RJ-45 Functions .............................................................................31Details.(RJ-45).........................................................................................31

Tests ...............................................................................................35Ping..........................................................................................................37Browser....................................................................................................38

Thru Mode ......................................................................................40

Contact 3M .....................................................................................44


VDSL2 Service ModuleIntroduction

The.VDSL2.Service.Module.is.used.with.the..3M™.Dynatel™.Advanced.Modular.System.965AMS.to.test.and.troubleshoot.both.xDSL.circuits.and.ethernet.networks.

DSLAM

DSLModem

Computer

Test Leads orRJ-11 Adapter

RJ-45 Adapter

When.testing.xDSL.circuits,.the.tester.can.be.connected.using.either.the.regular.test.leads,.or.with.the.RJ-11.adapter..

Ethernet.networks.are.only.connected.through.the.RJ-45.adapter.V

?

A Ω

TOOLS OPEN

USER

1

0 #*

2 3

4 5 6

7 8 9

MOD.

ins

SAVE

ESC

TONE

RFL DSL TDR

POTS AUTO DIAL

F1 F2 F3 F4 F5

del

abc def

jklghi mno

tuvpqrs wxyz

Test Leads RJ-11 (black) orRJ-45 (blue) Adapter


Introduction

The.VDSL+.module.includes.web.browser.and.ping.functions.which.can.be.used.with.either.a.DSL.or.ethernet.connection.

The.tester.can.also.be.used.in.place.of.a.DSL.modem.to.connect.a.computer.to.the.internet.(Thru.Mode).

DSLAM

Computer

Module Installation

1.. The.3M™.Dynatel™.Advanced.Modular.System.965AMS.VDSL2.Service.Module.is.designed.to.be.installed.in.the.3M™.Dynatel™.Advanced.Modular.System.965AMS.base.unit.

2.. Press.and.hold.the.red. .key.for.10.seconds,.then.release.to.power.down.the.unit.

3.. Place.the.tester.face.down.on.a.soft.surface.


Module Installation

4.. Loosen.the.captured.screws.on.the.blank.module.or.other.service.module.

5.. Remove.the.blank.module.or.other.service.module.


Module Installation

6.. Position.the.new.module.over.the.screw.holes.and.hand-tighten.the.screws..(The.VDSL2.module.uses.only.2.screws.)

Due.to.the.high.power.dissipation.of.the.modem.in.the.VDSL2.module,.the.internal.temperature.of.the.module.is.monitored..When.the.internal.temperature.reaches.a.value.that.is.near.the.upper.temperature.limit.of.the.components.in.the.module,.the.module.is.shut.down.and.a.warning.message.is.displayed.to.the.user..At.that.point.the.user.should.let.the.unit.cool.down.for.15.to.30.minutes.before.retrying.the.measurement..The.following.approximate.operating.times.apply:

•..At.less.than.45°C.(113°F).the.module.should.operate.indefinitely.

•..At.50°C.(122°F),.the.temperature.limit.may.be.reached.after.the.module.is.on.and.connected.for.approximately.75.minutes.

•..At.60°C.(140°F),.the.temperature.limit.may.be.reached.after.the.module.is.on.and.connected.for.approximately.25.minutes.

RJ-45 Adapter Installation

1.. Connect.the.RJ-45.adapter.cable.to.the.connector.on.the.service.module..

2.. Connect.your.RJ-45.or.RJ-11.network.cable.to.the.adapter.


Network SetupsTo.access.all.the.functions.of.the.3M™.Dynatel™.Advanced.Modular.System.965AMS.VDSL2.Service.Module,.you.must.complete.4.network.setups:,.LAN Setup, WAN Setup, Ping Setup and.ATM Transport Setup.

ATM Transport Setup

Note: The xDSL and RJ-45 Details functions only require the ATM Transport Setup.

1.. Press.the.red. .key.to.power.up.the.tester..When.the.unit.wakes.up,.press.the.blue. .key.to.use.the.service.module.

2.. If.the.“Wrong.Module.Selected”.message.appears,.use.the.up.and.down.arrow.keys.to.select.VDSL2.from.the.list..Press. OK .

10


ATM Transport Setup

3.. Press. .to.return.to.the.previous.screen.

4.. Press. Setup .to.view.the.Network.Setups.screen.

5.. Use.the.up.and.down.arrows.to.select.ATM Transport Setup,.then.press. Edit .

11


ATM Transport Setup

6.. Use.the.up.and.down.arrow.keys.to.select.LLCSNAP (Logical.Link.Control/Sub-Network.Access.Protocol).or.VCMUX.(Virtual.Channel.Multiplexing).

7.. Press. Select .to.highlight.the.VPI.(Virtual.Path.Identifier).

8.. Use.the.blue.keys.to.enter.the.VPI.

9.. Press. Select to.highlight.the.VCI.(Virtual.Channel.Identifier).

12


ATM Transport Setup

10.. Use.the.blue.keys.to.enter.the.VCI.

11.. Press. OK .or. .to.see.previous.screens..Multiple.presses.will.take.you.to.the.Network.Setup.screen.

WAN SetupThe.VDSL2.Service.Module.can.be.configured.for.four.different.transport.types:.EoA.(Ethernet over ATM),.IPoA.(Internet Protocol over ATM),.PPPoE.(Point to Point Protocol over Ethernet).and.PPPoA.(Point to Point Protocol over ATM)..PPPoE.&.PPPoA.require.a.username.and.password.

The.module.can.also.use.two.different.address.modes:.DHCP.and.Static.IP..Static.IP.requires.entering.the.local.IP,.subnet.mask.and.default.gateway.information.

1


WAN Setup>Transport Type

1.. Use.the.up.and.down.arrow.keys.to.select.WAN Setup,.then.press. Edit .

2.. Use.the.up.and.down.arrow.keys.to.choose.the.Transport.Type..The.choices.include:

. EoA.PPPoE.IPoA.PPPoA

3.. If.you.choose.EoA.or.IPoA,.press. Select .and.go.to.WAN Setup>Address Mode.on.page.15.

4.. If.you.choose.PPPoE.or.PPPoA,.press. Select .and.use.the.up.and.down.arrow.keys.to.select.the.mode,.then.press. Setup PPPOE .or.

Setup PPPOA ..

1



5.. Use.the.blue.keys.to.enter.the.complete.Username..The.Username.can.be.a.maximum.of.63.alphanumeric.characters...Use.the.blue. .key.to.enter.the.characters.star,.period,or.comma...Use.the.blue. .key.to.use.the.keys.#,[email protected].$.

6.. Press. Select .to.highlight.the.Password.

7.. Use.the.blue.keys.to.enter.the.Password

. The.Password.can.be.a.maximum.of.63.alphanumeric.characters.

8.. Press. Select to.choose.the.Protocol..

1



9.. Use.the.up.and.down.arrow.keys.to.select.a.protocol.The.choices.are.PAP.or.CHAP.

10.. Press. OK .or. .to.return.to.the.WAN.Setup.screen...

WAN Setup>Address Mode

1.. Press. Select .to.highlight.Address.Mode..

2.. Use.the.up.and.down.arrow.keys.to.select.DHCP.or.Static.IP.

3.. If.you.choose.Static.IP,.press. Setup IP ,.otherwise.press. OK .and.go.to.LAN Setup.on.page.17.

1



4.. Use.the.blue.keys.to.enter.the.local.IP.

Note: The “ . ” character is located under the Dial key.

5.. Press. Select to highlight.the.Subnet.Mask..

6.. Use.the.blue.keys.to.enter.the.Subnet.Mask.

7.. Press. Select .to.highlight.the.Default.Gateway.

1



8.. Use.the.blue.keys.to.enter.the.Default.Gateway.

9.. Press. OK .or. .to.return.to.the.WAN.Setup.screen.

10.. Press. OK .or. .to.return.to.the.Network.Setups.screen.

LAN Setup

1.. Use.the.up.and.down.arrow.keys.to.select.LAN Setup,.then.press. Edit .

Note: The LAN setup is required if you want to use Thru-Mode.

1


LAN Setup

2.. Use.the.up.and.down.arrow.keys.to.highlight.Modem.or.Ethernet,.then.press. Select .

3.. Use.the.up.and.down.arrow.keys.to.highlight.DHCP.or.Static.

. If.you.choose.Static,.press.Static Setups .to.enter.the.

LAN.IP.

. Otherwise,.press. OK .or..to.see.previous.screens..

Multiple.presses.will.take.you.to.the.Network.Setups.screen.

1


LAN Setup

4.. Use.the.blue.keys.to.enter.the.local.IP,.or.use.the.default.IP..

5.. Press. Select .to.enter.your.Subnet.Mask.

6.. Use.the.blue.keys.to.enter.the.Subnet.Mask,.or.use.the.default.Subnet.Mask.

7.. Press. Select .to.enter.your.DNS.Server.

20


LAN Setup

8.. Use.the.blue.keys.to.enter.the.DNS.Server.address,.or.use.the.default.address..

7.. Press. OK .or. .to.see.previous.screens..Multiple.presses.will.take.you.to.the.Network.Setups.screen.

Ping Setup

Note: Ping setup is only required to use the Ping function.

1.. Use.the.up.and.down.arrow.keys.to.select.Ping Setup,.then.press. Edit .

21


Ping Setup

2.. Use.the.blue.keys.to.enter.the.IP.address.you.want.to.ping,.or.press.Use Default Address .

Note: You will need to enter the destination IP instead of entering a domain name.

3.. Press. Select .

4.. Use.the.blue.keys.to.enter.the.number.of.pings.or.use.the.default.value.

5.. Press. Select .

22


Ping Setup

6.. Use.the.blue.keys.to.enter.the.packet.size.or.use.the.default.value..

7.. Press. OK .or. .to.see.previous.screens..Multiple.presses.will.take.you.to.the.DataLink.screen.

2


xDSL FunctionsUse.xDSL.functions.to.access.the.modem.for.testing..Functions.available.under.the.xDSL.key.include.Details and.Tests.

Details (xDSL)Use.Details.to.obtain.information.about.an.xDSL.circuit..Details.include.Link Metrics, Transport Metrics, Bin Graph, SNR Graph and.xDSL Configuration..Only.the.ATM.Transport.Setup.is.required.

Details (xDSL)>Hook-Up

RED

BLK

Ring 1Ring 1

Tip 1Tip 1

RJ-11 AdapterRJ-11 Adapter

OROR

.

2


Details (xDSL)>Setup

Note: The xDSL and RJ-45 Details functions only require the ATM Transport Setup.

1.. Press.the.red. .key.to.power.up.the.tester.

2.. Complete.the.ATM.Transport.Setup.(page.9).if.necessary.

3.. Press. xDSL .to.view.the.DSL.DataLink.screen.

4.. Press. Setup .to.view.the.DSL.Setup.screen.

2


Details (xDSL)>Setup

5.. Use.the.up.and.down.arrow.keys.to.highlight.the.type.of.service..The.choices.are:

. VDSLAuto.ADSLAuto.VDSLCNXT.VDSLIKANOS

. Press. Select ..Use.the.up.and.down.arrow.keys.to.select.the.connection.to.the.tester..Select.“TestLeads”.when.using.the.red.and.black.leads..Select.“External”.when.using.the.RJ-11.adapter.

6.. Press. MAC Setup .to.edit.the.Media.Access.Control.address.(MAC.address).

7.. If.necessary,.the.Media.Access.Control.address.can.be.changed.using.the.blue.keys.

. Press. Restore Original .to.reset.the.unit.to.the.default.MAC.address.(12-34-56-78-90-AB).

8.. Press. OK .or. .to.see.previous.screens..Multiple.presses.will.take.you.to.the.DSL.DataLink.screen.

2


Details (xDSL)>Operation

1.. The.DSL.DataLink.screen.shows.the.type.of.service.selected,.the.type.of.transport.selected.and.the.modem.status..

2.. The. Start Link .key.will.appear.when.the.module.is.ready.for.service..Press.the.

Start Link .key.to.connect.to.the.DLSAM.

3.. When.the.DLSAM.connects.with.the.tester,.the.Up.Stream.and.Down.Stream.speeds.will.be.displayed

. The.green.LED.will.blink.during.the.connecting.process,.and.light.continuously.once.connected.

LED

4.. Press. Details .to.see the.first.Link.Metrics.screen.

2



5.. The.Link.Metrics.screens.show.details.about.this.circuit.

. Press. More .to.see.the.second.Link.Metrics.screen.

6.. Press. More .to.see.the.third.Link.Metrics.screen.

7.. Press. Bin Graph .to.see.the.Bin.data.

2



8.. Use.the.left.and.right.arrow.keys.to.see.each.bin.and.the.quantity.of.bits.per.bin.

. Press. SNR Graph .to.see.the.signal-to-noise.ratio.data.

9.. Use.the.left.and.right.arrow.keys.to.see.each.bin.and.the.quantity.of.bits.per.bin.

. Press. OK or. .to.see.previous.screen.

2



10.. Press. Transport Metrics .to.see.the.Transport.Metrics.

11.. The.Transport.Metrics.screen.shows.details.about.the.connection.

. Press. About Me .to.see.the.ADSL.configuration.

12.. Use.the.up.and.down.arrow..keys.to.scroll.through.the.configuration.details.

. Press. .to.see.previous.screens..Multiple.presses.will.take.you.to.the.DataLink.screen.

0



13. Press. Stop Link .to.power.down.the.modem....

1


RJ-45 FunctionsUse.RJ-45.functions.to.test.ethernet.connectivity.

Details (RJ-45)Use.Details.to.obtain.information.about.an.ethernet.circuit..Details.include.Link Metrics, Transport Metrics and.RJ-45 Configuration.

Details (RJ-45)>Hook-Up


Details (RJ-45)>Setup


2.. Complete.the.ATM.Transport.Setup.(page.9).if.necessary.

3.. Press. RJ-45 .to.view.the.Ethernet.screen.

2



4.. Press. Setup .to.view.the.RJ-45.Setup.screen.

5.. Use.the.up.and.down.arrow.keys.to.highlight.the.Link.Mode..The.choices.are:

. Auto.10.Mbps.Half.10.Mbps.Full.100.Mbps.Half.100.Mbps.Full

6.. Press. MAC Setup .to.edit.the.Media.Access.Control.address.(MAC.address).



7.. If.necessary,.the.Media.Access.Control.address.can.be.changed.using.the.blue.keys.

. Press. Restore Original .to.reset.the.unit.to.the.default.MAC.address.(12-34-56-78-90-AB).

8.. Press. OK .or. .to.see.previous.screens..Multiple.presses.will.take.you.to.the.Ethernet.screen.

Details (RJ-45)>Operation

1.. Press. Details .to.see the.first.Link.Metrics.screen.


Details (RJ-45)>Operation

5.. The.Link.Metrics.screens.show.details.about.this.circuit.

. Press. Transport Metrics .to.see.the.Transport.Metrics.

6.. The.Transport.Metrics.screen.shows.details.about.the.connection.

. Press. About Me .to.see.the.ADSL.configuration.

7.. Use.the.up.and.down.arrow..keys.to.scroll.through.the.configuration.details.

. Press. .to.see.previous.screens..Multiple.presses.will.take.you.to.the.Ethernet.screen.


TestsTest.functions.include.Ping.and.Browse..These.operations.require.entering.the.VDSL2.Service.Module’s.Wide.Area.Network.(WAN).and.Local.Area.Network.(LAN).information.and.Ping.settings.

The.Tests.menu.is.available.from.the.Tests.button.on.the.DSL.DataLink.screen,.or.the.Tests.button.on.the.Ethernet.screen.

Tests>Hook-Up

RED

BLK

Ring 1Ring 1

Tip 1Tip 1


OROR

Tests>Setup


2.. Complete.the.network.setups.(page.9).if.necessary.

3.. Press. xDSL .to.view.the.DSL.DataLink.screen.or.RJ-45 .to.view.the.Ethernet.

screen,.depending.on.where.you.are.connecting.from.


Tests>Setup

4.. Press. Tests .to.view.the.Tests.screen.

OR

5.. Use.the.up.and.down.arrow.keys.to.select.the.test.


PingPing.is.used.to.send.request.packets.to.a.target.host..The.test.will.then.count.the.response.packets.and.the.time.delay.of.the.packets..The.default.target.is.Yahoo.com.

Ping.settings.are.entered.in.the.the.ping.setup.(page.20).

PING>Operation

1.. From.the.Tests.screen,.use.the.up.and.down.arrow.keys.to.select.Ping..Press. OK .to.start.the.test.

2.. Results.screen.

. Press. .to.return.to.the.Tests.screen.


BrowserBrowser allows.you.to.view.a.web.site.using.the.tester..

Browser>Operation

1.. Press.the.red. .key.to.power.up.the.tester..Press. Browse .to.start.the.browser,

OR

. From.the.Tests.screen,.use.the.up.and.down.arrow.keys.to.select.Browser..Press.

OK .to.start.the.browser.


Browser>Operation

2.. The.browser.is.configured.to.automatically.connect.to.the.Google.web.site.

. Press. .to.toggle.between.the.address.bar.and.the.web.page.

. Press. .to.go.to.the.previous.web.page.(back).

. Press. .to.go.to.the.next.web.page.(forward).

. Press. .to.toggle.between.stop.and.refresh.on.the.web.page.

. Press. .for.“Enter.”

. The.arrow.keys.and. .key.function.normally.

3.. You.can.view.a.complete.list.of.function.keys.by.pressing. .while.browsing.

4.. Press. .to.return.to.the.Tests.screen.

0


Thru ModeThru Mode allows.you.to.use.the.modem.in.the.tester.to.connect.a.PC.or.laptop.to.the.internet.service.provider..

Notice: You must complete the WAN & LAN Setups before you can use Thru Mode.

Thru Mode>Hook-Up

Connect.the.ethernet.port.of.your.computer.to.the.RJ-45.adapter..Connect.the.tester.to.the.local.loop.


RED

BLK

Ring 1Ring 1

Tip 1Tip 1

Thru Mode>Operation


2.. Complete.the.WAN.and.LAN.setups.(pages.12–20).if.necessary.

3.. Press. xDSL .to.view.the.DSL.DataLink.screen.

1


Thru Mode>Operation

4.. The. Start Link .key.will.appear.when.the.module.is.ready.for.service..Press.the.

Start Link .key.to.connect.to.the.DLSAM.

5.. When.the.DLSAM.connects.with.the.tester.the.Up.Stream.and.Down.Stream.speeds.will.be.displayed

. The.green.LED.will.blink.during.the.connecting.process,.and.light.continuously.once.connected.

LED

5.. Press. Thru On .to.activate.Thru.Mode.

2


Thru Mode>Operation

5.. If.the.Thru.Mode.does.not.connect,.use.the.ping.command.on.your.computer.to.verify.that.the.is.circuit.working:

. 5.1.From.the.Start.menu,.select.“Run.”


Thru Mode>Operation

. 5.2.Enter.ping <IP address>...If.you.selected.DHCP.in.the.LAN.setup,.the.IP.address.of.the.modem.is.192.168.1.1...If.you.selected.Static.IP.in.the.LAN.setup,.use.the.address.entered.in.step.4.on.page.19.

6.. If.the.ping.command.on.the.PC.is.not.successful,.troubleshoot.the.cable.pair.using.normal.POTS.troubleshooting.techniques.


Contact 3MContact.3M.Technical.Support.at.1-800-426-8688,.option.3.

This is the EU symbol for equipment that is covered under the Waste from Electrical and Electronic Equipment (WEEE) directive per CENELEC Specification 5041. It indicates that certain products should not be discarded in the trash, but rather should be recycled. This applies to all electronic pluggable and battery powered products.

3M, the 3M logo and Dynatel are trademarks of 3M Company.

Important NoticeAll statements, technical information, and recommendations related to 3M’s products are based on information believed to be reliable, but the accuracy or completeness is not guaranteed. Before using this product, you must evaluate it and determine if it is suitable for your intended application. You assume all risks and liability associated with such use. Any statements related to the product which are not contained in 3M’s current publications, or any contrary statements contained on your purchase order shall have no force or effect unless expressly agreed upon, in writing, by an authorized officer of 3M.

Warranty; Limited Remedy; Limited Liability. This product will be free from defects in material and manufacture for a period of one (1) year from the time of purchase. 3M MAKES NO OTHER WARRANTIES INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. If this product is defective within the warranty period stated above, your exclusive remedy shall be, at 3M’s option, to replace or repair the 3M product or refund the purchase price of the 3M product. Except where prohibited by law, 3M will not be liable for any indirect, special, incidental or consequential loss or damage arising from this 3M product, regardless of the legal theory asserted.

3

Communication Markets Division3M Telecommunications6801 River Place Blvd.Austin, TX 78726-90001-800-462-8688www.3MTelecommunications.com

Please Recycle. Printed in USA.© 3M 2007. All Rights Reserved.78-8135-7673-9 Rev. A

3 Dynatel .Advanced.Modular.System. 965AMS.VDSL2.Service...

Documents

Transcript of 3 Dynatel .Advanced.Modular.System. 965AMS.VDSL2.Service...