24kV Elbow connector
Transcript of 24kV Elbow connector
AMPLETEK cable accessories for XLPE cables 12-36kV
24kV Elbow connector
Application
Elbow connectors are made of EPDM rubber in 3
layers, inner conductive layer, insulating layer and
outer conductive layer.Supplied completed kit with plug-in connection for one or three-core XLPE/EPR cable up to 24kV with Al or Cu conductors. Elbow connectors are used in
rain main unit and pad-mounted transformer. It fits
for standard bushings with interface type “A”.
StandardMeets the requirements of
- IEC 60502.4
- CENELEC, En50180
TestTests are conducted in accordance with standard
- Rated voltage 24kV - Rated current 250A- AC withstand voltage 54kV/5mins- Partial discharge at 24kV ≤10pC- Visual inspection
IEC 60502.4
FeatureFully insulated, fully sealed and fully screenedExcellent stress controlEasy and safe installationCompact designLong shelf lifeNo special tools
Conductorcross section
2 mm
35-70
95-120
XLPE/EPR diameter mm
Weight
kg/item
Bushing type
Plug -in 7.9Φ
Material
EPDM
EPDM
Type No.: AZT-24/250A
AMPLETEK 2010,edition 1 www.ampleasia.com MPLETER
A 1
Plug -in 7.9Φ
18-20.8
22.5-23.9
Dimensions and accessories All dimensions in mm
AMPLETEK cable accessories for XLPE cables 12-36kV
Description
Test point cap
Cable lug
Linking rod
Bolt & Nut
Fixing tool
Specification
Hexagon
As per request
L=180mm*M5
Weight
kg/pcs
Quantity
pcs
3
3
3
6
1
Material
EPDM rubber
Cu
Cu or Al
Steel
Steel
AMPLETEK 2010,edition 1 www.ampleasia.com MPLETER
A 1
AZT-24/250A
Compression board 3 Steel
Hexagon
Test point cap
Cable lug and Linking rod Fixing tool
Compression board and Bolt & Nut
Standard bushing EN 50181
200 series 250 A
Contact type: Plug-in φ7.9mm
Interface type: A