2/2-Wege-Automatik-Armatur – Typ PKN · 2/2-Wege-Automatik-Armatur – Typ PKN Absperrarmatur aus...
Transcript of 2/2-Wege-Automatik-Armatur – Typ PKN · 2/2-Wege-Automatik-Armatur – Typ PKN Absperrarmatur aus...
2/2-Wege-Automatik-Armatur – Typ PKN
Absperrarmatur aus Edelstahl mit schwimmend gelagerter Präzisonskugel. Die Ar -matur wird pneumatisch (doppelt- oder einfachwirkend) betätigt und zeichnet sich durch lange Lebensdauer und hohe Betriebssicherheit aus.
Produktbeschreibung
Technische Daten 2/2-Wege-Kugelhahn
Technische Daten
Nennweite DN15 – DN50
Anschlussart Innengewinde Rp 1/2“ bis Rp 2“ nach ISO 7-1
Einbaulage beliebig
Nenndruckstufe PN 100
Betriebsdruck siehe Druck-Temperatur-Diagramm
Temperaturbereich -20 °C bis 180 °C
Werkstoffe Gehäuse: Edelstahl AISI 316 (1.4408) Kugel: Edelstahl AISI 316 (1.4401)Schaltwelle: Edelstahl AISI 316 (1.4401)Dichtschalen: PTFESchaltwellendichtung: PTFE + FKM
Durchflussmedien neutrale Gase und Flüssigkeiten (andere Medien auf Anfrage)
Durchflussrichtung beliebig
Technische Daten Antrieb AD/AS
Technische Daten
Steuerdruck 2 bis 8 bar
Steuermedium Luft oder neutrale Gase (weitere Medien auf Anfrage)nach DIN ISO 8573-1 Klasse 4 (Mindestanforderung)
Umgebungstemperatur -20 °C bis +80 °C (Standard)-20 °C bis +160 °C
Betätigung pneumatisch doppelt- oder einfachwirkend
Endlageneinstellung +5° bis -10° einstellbar in beiden Endlagen
Schnittstellen nach EN ISO 5211 und VDI/VDE 3845
Maßtabelle
Bitte sprechen Sie uns an.
Sonderausführungen
- voller Durchgang - wartungsfrei - optional ausrüstbar mit Endlagenrückmeldungen, Stellungsreglern und Magnetventilen- ausblassichere Spindel- Verwendung auch bei Vakuum und hohen Strömungsgeschwindigkeiten- alternativ auch mit elektrischem Schwenkantrieb, Handhebel oder Getriebe lieferbar
Produktmerkmale
Rp DN Antrieb A B C D E F G H I SW Gewicht (kg)
1/2“ 15 004 144 60 151 24 G 1/8“ 77 68 68 36 26 1,93/4“ 20 004 144 70 159 24 G 1/8“ 77 68 68 39,5 32 2,13/4“ 20 006 159 70 175 32 G 1/8“ 85 76 84 39,5 32 2,81“ 25 004 144 90 168 24 G 1/8“ 77 68 68 44 41 2,31“ 25 006 159 90 184 32 G 1/8“ 85 76 84 44 41 3,11“ 25 008 173 90 208 31 G 1/8“ 104 98 108 44 41 3,8
5/4“ 32 004 144 110 160 24 G 1/8“ 77 68 68 51 50 2,85/4“ 32 006 159 110 176 32 G 1/8“ 85 76 84 51 50 3,65/4“ 32 008 173 110 221 31 G 1/8“ 104 98 108 51 50 4,35/4“ 32 011 215 110 221 31 G 1/8“ 104 98 108 51 50 4,93/2“ 40 006 159 120 210 32 G 1/8“ 85 76 84 58 56 3,93/2“ 40 008 173 120 234 31 G 1/8“ 104 98 108 58 56 4,93/2“ 40 011 215 120 234 31 G 1/8“ 104 98 108 58 56 5,53/2“ 40 018 213 120 258 35 G 1/4“ 122 114 132 58 56 7,12“ 50 006 159 140 230 32 G 1/8“ 85 76 84 68 69 5,42“ 50 008 173 140 254 31 G 1/8“ 104 98 108 68 69 6,42“ 50 011 215 140 254 31 G 1/8“ 104 98 108 68 69 7,02“ 50 018 213 140 278 35 G 1/4“ 122 114 132 68 69 8,6
Druck-Temperatur-Diagramm
0 25 50 75 100 125 150 175
Medium-Temperatur (°C)Bet
riebs
druc
k (b
ar)
100
80
60
40
20
bar pneumatische Steuerungssysteme GmbHAuf der Hohl 1 • 53547 Dattenberg • Germany
Tel. +49 (0) 2644 96070 • Fax +49 (0) 2644 [email protected] • www.bar-gmbh.de
© 2018 Watts
The descriptions and photographs contained in this product specification sheet are supplied by way of information only and are not binding.
Watts Industries reserves the right to carry out any technical and design improvements to its products without prior notice.”
Warranty: All sales and contracts for sale are expressly conditioned on the buyer’s assent to Watts terms and conditions found on its website at www.wattsindustries.com
Watts hereby objects to any term, different from or additional to Watts terms, contained in any buyer communication in any form, unless agreed to in a writing signed by an officer of Watts.
AD
Rp DN 4 bar Antriebe 6 bar Antriebe1/2“ 15 AD-004 AD-0043/4“ 20 AD-004 AD-0041“ 25 AD-004 AD-004
1 1/4“ 32 AD-006 AD-0041 1/2“ 40 AD-008 AD-006
2“ 50 AD-011 AD-006
AS
Rp DN 4 bar Antriebe 6 bar Antriebe1/2“ 15 AS-004-08 AS-004-103/4“ 20 AS-006-08 AS-004-101“ 25 AS-008-07 AS-006-12
1 1/4“ 32 AS-011-08 AS-008-111 1/2“ 40 AS-018-07 AS-011-11
2“ 50 AS-018-08 AS-011-12
Antriebszuordnung, bei max. Differenzdruck von 10 bar
Maßzeichnung
Bestellangaben
PKN- 1/0- 025- C- AS 008- 08
Anschlussmaß in Zoll
Nennweite Federwirkung:C = Federkraft schließendA = Federkraft öffnend(Angabe entfällt bei doppelt-wirkender Ausführung)
Antriebsbezeichnung Federcode (Angabe entfällt bei doppelt-wirkender Ausführung)