2011 Guide Epson Roll Paper 10.13

8/2/2019 2011 Guide Epson Roll Paper 10.13

1/880

CONFIDENTIAL

ESC/POS ApplicationProgramming Guide

R

Ver. 10.13

Printers & Commands

ESC/POS Information

Character Code Tables

Confidentiality Agreement

Whats New In This Version?

How to Use This Guide

About This Guide

Paper Roll Printers

404394113


2/880

CONFIDENTIAL

Commands in Alphanumeric Order

Commands Arranged by Function

Commands Arranged by Printer

TM-T88IV supported commands

TM-T90 supported commands

TM-L90 supported commands

TM-J2000/J2100 supported commands

TM-U220 supported commands


TM-P60 supported commands


TM-T88V supported commands


printers & commands


3/880

CONFIDENTIAL

blue

text

PRINTER

name

TextAny text colored blue is a link to another screen.Click the text to go to that topic.

Printer information

Most information applies to all printers in a category.If there is information specific to one printer, you see itsname in colored text, with a different color for eachprinter. The model dependent information appears if youclick on the name of the printer or look at the bottom ofthe screen for text in the appropriate color.

how to use this guide


4/880

CONFIDENTIAL

Version 10.00TM-U220 added.This guide (Paper Roll Printers) is now separate from the guides for othertypes of printers.

Version 10.01TM-P60 added.

Version 10.02TM-L90 with Peeler added.

Version 10.03TM-P60 Bluetooth Interface Model added.

Version 10.04TM-P60 with Peeler added.

Version 10.05TM-T88IV and TM-T70 added.

Version 10.06TM-T70 Japanese model (paper width 80mm) added.

Version 10.07

TM-T88IV compatible-command functions added (TM-T70).Version 10.08TM-U230 ESC t [Range] corrected: n=19

Version 10.09TM-T70/TM-T88IV South Asia model added.

Version 10.10TM-T88V added.

Version 10.11TM-T20 added.

Version 10.12TM-T88V South Asia and Korean models added .Version 10.13

TM-P60 GS ( E [Range] and [Default]: 3.02 ESC/POS or lateradded.

whats new in this version?


5/880

CONFIDENTIAL

ESC/POS Application Programming Guide for Paper Roll PrintersVersion 10.13

Seiko Epson Corporation

Notice: The contents of this manualare subject to change without notice

EPSON and ESC/POS are registered trademarks of Seiko Epson Corporation inJapan and other countries/regions.

Windows is a registered trademark of Microsoft Corporation in the UnitedStates and/or other countries.

Adobe, Acrobat, and Reader are either registered trademarks or trademarksof Adobe Systems Incorporated in the United States and/or other countries.

about this guide


6/880

CONFIDENTIAL

BY USING THIS DOCUMENT, YOU AGREE TO ABIDE BY THE TERMS OF THISAGREEMENT. PLEASE RETURN THIS DOCUMENT IMMEDIATELY IF YOU DO NOT

AGREE TO THESE TERMS.This document contains confidential, proprietary information of Seiko Epson

Corporation or its affiliates. You must keep such information confidential. If theuser is a business entity or organization, you must limit disclosure to those ofyour employees, agents and contractors who have a need to know and who arealso bound by obligations of confidentiality.

On the earlier of (a) termination of your relationship with Seiko Epson, or (b)

Seiko Epson's request, you must stop using the confidential information. Youmust then return or destroy the information, as directed by Seiko Epson.If a court, arbitrator, government agency or the like orders you to disclose any

confidential information, you must immediately notify Seiko Epson. You agreeto give Seiko Epson reasonable cooperation and assistance in resistingdisclosure.

You may use confidential information only for the purpose of facilitatingauthorized sales and service of, or developing software and similar products for

authorized use with, EPSON products. Any other use requires the prior writtenconsent of Seiko Epson.

THE INFORMATION IN THIS DOCUMENT IS PROVIDED AS IS, WITHOUTWARRANTY OF ANY KIND, INCLUDING ANY WARRANTY OF TITLE ORNONINFRINGEMENT. Seiko Epson has no liability for loss or damage arising fromor relating to your use of or reliance on the information in the document.

You may not reproduce, store or transmit the confidential information in any

form or by any means (electronic, mechanical, photocopying, recording, orotherwise) without the prior written permission of Seiko Epson.Your obligations under this Agreement are in addition to any other legal

obligations. Seiko Epson does not waive any right under this Agreement byfailing to exercise it. The laws of Japan apply to this Agreement.

confidentiality agreement


7/880

C O N F I D E N T I A L

Paper roll ESC/POS proprietary command system Ver.10.13 p. 7

ESC/POS proprietary command system

The market for store automation equipment is changing rapidly with the widespread introduction of POS (point of sale)terminals. These terminals are now appearing even in small retail stores and specialty shops.

As personal computers begin to be used as POS terminals, the demand for matching uniform peripheral devices is expected torise. At present, however, many of the competing POS terminal printers on the market employ mutually incompatiblecommand sets. This imposes limits on the expandability and range of applications possible with PC-based systems. There is aneed for a new command set designed to provide the expandability and universal applicability demanded by the market.

ESC/POS

EPSON took the initiative by introducing ESC/POS, a proprietary POS printer command system, which includes patented orpatent pending commands and enables versatile POS system construction with high scalability. Compatible with all types ofEPSON POS printers and displays, this proprietary control system also offers the flexibility to easily make future upgrades. Itspopularity is worldwide.

ESC/POS is designed to reduce the processing load on the host computer in POS environments. It comprises a set of highlyfunctional and efficient commands that enables the full realization of the potential of printers.

A command set designed for universal applicability

The commands that are supported by all EPSON POS printers and those that are specific to individual models are clearlydescribed. This means that ESC/POS compatible software will work with any system and be suitable for a wide range ofapplications.

Superb expandability allowing the addition of new functions

New functions can be added and accommodated by the categories already provided in the command system.

Allows more effective use of software

Once a software application has been created for one printer in the TM series, it can be used as the basis for versions for the

other printers in the series. Only a small portion of the program source code needs to be modified.

ESC/POSPROPRIETARY COMMAND SYSTEM


8/880


Paper roll Command classification Ver.10.13 p. 8

Command classification

ESC/POS printer commands are classified by functions such as print, character, print position, printing paper, line spacing,panel button, paper sensor, mechanism control, status, bar code, bit-image, macro function, control option, and miscellaneousfunctions. The classification is called function classification.

ESC/POS printer commands are also classified by sheet and grade. The sheet and grade classification is called matrixclassification.

The sheet classification is divided into single sheet commands and multiple sheet commands. The grade classification isseparated into basic commands and extension commands.

Basic commands are defined as fundamental printer controls, including print commands and character type selectioncommands. Extension commands are defined as control codes for functions specific to individual printers. These commandsare further divided into mechanical extension commands that relate to additional mechanical functions such as stamp andautocutter units, hardware extension commands that relate to additional hardware functions such as panel button and statustransmission controls, and software extension commands that relate to additional software functions such as user-defined and

bar code controls. The next screen is an overview diagram of the matrix classification of ESC/POS.

COMMAND CLASSIFICATION


9/880


Paper roll Command classification Ver.10.13 p. 9

Multiple sheet

Single sheet commands

Multiple sheet

Single sheet

Sheet

Basic commands

commands

Extension commands

Grade

Hardwareexten

sioncommands

Mechanicalexte

nsioncommands

Softwareextensioncommands


10/880


Paper roll Overview of data processing Ver. 10.13 p. 10

Overview of data processing

Character Data and Normal CommandsThe printer stores data sent from the host computer in the receive buffer temporarily, and then the printer interprets the dataand classifies them into commands or character data sequentially. If the data from the receive buffer is a normal command,the printer processes the command corresponding to its function; for example, if the data interpreted is ESC 3, the printerchanges a setting value for the line spacing, and if it is LF, the printer prints the data in the print buffer and feeds the paperone line.

If the data from the receive buffer is character data, the printer reads the appropriate font data from the resident charactergenerator and writes image data to the print buffer.

Real-time Commands

The printer stores data sent from the host computer in the receive buffer, interprets the data, and processes the commandscorresponding to their function one line at a time. The real-time commands are the commands that consist of a DLE

extension, such as DLE EOT or DLE ENQ. They are processed immediately. The real-time commands are ignored asundefined codes in the main processing.

OVERVIEW OF DATA PROCESSING


11/880


Paper roll Overview of data processing Ver. 10.13 p. 11

Data processing diagram

Hostcomputer

Interface

Character generator

(Font data)

Print buffer Mechanism

Receive buffer

Real-timecommandprocessing

Main processing[Data analysis/processing]

(Character data/normal command)


12/880


Paper roll Definitions Ver. 10.13 p. 12

Definitions

Normal commandsNormal commands are all the commands except real-time commands. The normal commands are stored in thereceive buffer temporarily and then processed sequentially.

Real-time commandsReal-time commands are the commands that consist of a DLE extension (such as DLE EOT or DLE ENQ). The real-time commands execute processing when received. After executing, they are stored in the receive buffer and thendiscarded as undefined codes when the normal commands are processed.

Receive bufferThe receive buffer is used to store data from the host computer. All received data is stored in this buffer andprocessed in the order received. Buffer capacity depends on the printer model used.

Obsolete commandsThese are commands that will not be supported by future printer models. The command descriptions give a bettercommand to use for the same function.

Print bufferThe print buffer is used to store image data for printing.

Print buffer-fullThis state occurs when the print buffer becomes full.

Print buffer-full printingIf new print data (such as characters or bit images) or horizontal tabs are processed in standard mode when the printbuffer is full, the image data already stored in the print buffer is printed, and a line feed is executed. This is the same

operation as LF. The data (print data or horizontal tab) that causes the print buffer-full is processed from thebeginning of the next line.

If new print data (such as characters or bit images) or horizontal tabs are processed in page mode when the printbuffer is full, the printer moves the print position to the beginning of the next line (the same operation as LF) andprocesses the data (print data or horizontal tabs) that causes the print buffer-full.

DEFINITIONS


13/880



Beginning of the lineThe beginning of the line meets all of the following conditions:

No data exists in the print buffer.

No spaces are skipped by HT in the print buffer. The print position has not been specified by ESC $ or ESC \.

In standard mode, the beginning of the line is the left margin.

Printable areaThis is the maximum printable area specified for each printer model.This can be changed by setting the paper width with GS ( Efn = 5 or DIP switch or setting of paper layout that issupported by the label printer model.

Printing areaThis is the printing range set by a command. The printing area should be equal to or smaller than the printable area.In standard mode, the printing area is set by GS L and GS W, and in page mode, it is set by ESC W.

Ignoring a commandThis is the printer state in which the printer does nothing after receiving all codes, including parameters.

Horizontal/vertical direction

Horizontal direction is the direction that is perpendicular to the paper feed direction. Vertical direction is the paperfeed direction. In page mode, however, horizontal/vertical direction differs, depending on the print direction of acharacter, not the paper feed direction.

BaselineThe baseline for character sets that are 9 dots high (for example, 7 9 and 9 9) is the invisible line marking thebottom of the character matrix (the bottom of the lowest dot possible). For other character sets, the baseline is thebottom of all characters, excluding descenders, such as the bottom parts of g and y, which are below the

baseline.Setting commands

Setting commands change printer status by processing a command and affect printer operation and print resultsthereafter. The commands that can specify enhanced characters, set paper feed amount, and select a character aresetting commands as are some of the normal commands.

C O


14/880



Executing commandsExecuting commands affect printer operation and change the printer status temporarily but do not affect thefollowing printer operation. Functions of printing, paper cutting, and status transmission are executing commandsand the real-time commands and some of the normal commands are executing commands.

MSBMost Significant Bit

LSBLeast Significant Bit

Obsolete commandsThese are commands that will not be supported by future printer models. The description of each of these

commands gives a better command to use for the same function.Reserved bit

Reserved bits are as follows:

Bit that will be used for an extended function in the future.

Bit that has a function in the ESC/POS specification; however, the printer does not support the function.

Use a bit with a value indicated in a table.

Fixed bitUse a bit only with a value indicated in a table.



15/880


Paper roll TM-T88IV supported commands Ver. 10.13 p. 15


Command Classification Name Function type

HT EXECUTINGCOMMAND Horizontal tab PRINTPOSITIONCOMMANDS

LF EXECUTINGCOMMAND Print and line feed PRINTCOMMANDS

FF (in page mode) EXECUTINGCOMMAND Print and return to standard mode (in pagemode) PRINTCOMMANDS

CR EXECUTINGCOMMAND Print and carriage return PRINTCOMMANDS

CAN EXECUTINGCOMMAND Cancel print data in page mode CHARACTERCOMMANDS

DLE EOT EXECUTINGCOMMAND Transmit real-time status STATUSCOMMANDS

DLE ENQ EXECUTINGCOMMAND Send real-time request to printer MISCELLANEOUSCOMMANDS

DLE DC4 (fn = 1) EXECUTINGCOMMAND Generate pulse in real-time MISCELLANEOUSCOMMANDS

DLE DC4 (fn = 2) EXECUTINGCOMMAND Execute power-off sequence MISCELLANEOUSCOMMANDS

DLE DC4 (fn = 8) EXECUTINGCOMMAND Clear buffer(s) MISCELLANEOUSCOMMANDS

ESC FF EXECUTINGCOMMAND Print data in page mode PRINTCOMMANDS

ESC SP SETTING

COMMAND

Set right-side character spacing CHARACTERCOMMANDSESC ! SETTINGCOMMAND Select print mode(s) CHARACTERCOMMANDS

ESC $ EXECUTINGCOMMAND Set absolute print position PRINTPOSITIONCOMMANDS

ESC % SETTINGCOMMAND Select/cancel user-defined character set CHARACTERCOMMANDS

TM-T88IV SUPPORTED COMMANDS



16/880



ESC & SETTINGCOMMAND Define user-defined characters CHARACTERCOMMANDS

ESC EXECUTINGCOMMANDSelect bit-image mode BIT-IMAGECOMMANDS

ESC SETTINGCOMMAND Turn underline mode on/off CHARACTERCOMMANDS

ESC 2 SETTINGCOMMAND Select default line spacing LINESPACINGCOMMANDS

ESC 3 SETTINGCOMMAND Set line spacing LINESPACINGCOMMANDS

ESC = SETTINGCOMMAND Select peripheral device MISCELLANEOUSCOMMANDS

ESC ? SETTINGCOMMAND Cancel user-defined characters CHARACTERCOMMANDS

ESC @ EXECUTING + SETTING Initialize printer MISCELLANEOUSCOMMANDS

ESC D SETTINGCOMMAND Set horizontal tab positions PRINTPOSITIONCOMMANDS

ESC E SETTINGCOMMAND Turn emphasized mode on/off CHARACTERCOMMANDS

ESC G SETTINGCOMMAND Turn double-strike mode on/off CHARACTERCOMMANDS

ESC J EXECUTINGCOMMAND Print and feed paper PRINTCOMMANDS

ESC L EXECUTINGCOMMAND Select page mode MISCELLANEOUSCOMMANDS

ESC M SETTINGCOMMAND Select character font CHARACTERCOMMANDS

ESC R SETTINGCOMMAND Select an international character set CHARACTERCOMMANDS

ESC S EXECUTINGCOMMAND Select standard mode MISCELLANEOUSCOMMANDS

ESC T SETTINGCOMMAND Select print direction in page mode PRINTPOSITIONCOMMANDS

ESC V SETTINGCOMMAND Turn 90 clockwise rotation mode on/off CHARACTERCOMMANDS




17/880



ESC W SETTINGCOMMAND Set print area in page mode PRINTPOSITIONCOMMANDS

ESC \ EXECUTINGCOMMANDSet relative print position PRINTPOSITIONCOMMANDS

ESC a SETTINGCOMMAND Select justification PRINTPOSITIONCOMMANDS

ESC c 3 SETTINGCOMMAND Select paper sensor(s) to output paper-endsignals PAPERSENSORCOMMANDS

ESC c 4 SETTINGCOMMAND Select paper sensor(s) to stop printing PAPERSENSORCOMMANDS

GS ! SETTINGCOMMAND Select character size CHARACTERCOMMANDS

ESC c 5 SETTINGCOMMAND Enable/disable panel buttons PANELBUTTONCOMMAND

ESC d EXECUTINGCOMMAND Print and feed n lines PRINTCOMMANDS

ESC i EXECUTINGCOMMAND Partial cut (one point left uncut) MECHANISM CONTROL COMMANDS

ESC m EXECUTINGCOMMAND Partial cut (three points left uncut) MECHANISM CONTROL COMMANDSESC p EXECUTINGCOMMAND Generate pulse MISCELLANEOUSCOMMANDS

ESC u SETTINGCOMMAND Transmit peripheral device status STATUSCOMMANDS

ESC v SETTINGCOMMAND Transmit paper sensor status STATUSCOMMANDS

ESC t SETTINGCOMMAND Select character code table CHARACTERCOMMANDS

ESC { SETTINGCOMMAND Turn upside-down print mode on/off CHARACTERCOMMANDS

FS g 1 SETTINGCOMMAND Write to NV user memory CUSTOMIZECOMMANDS

FS g 2 EXECUTINGCOMMAND Read from NV user memory CUSTOMIZECOMMANDS




18/880



FS p EXECUTINGCOMMAND Print NV bit image BIT-IMAGECOMMANDS

GS ( A EXECUTINGCOMMANDExecute test print MISCELLANEOUSCOMMANDS

GS ( D SETTINGCOMMAND Enable/disable real-time command MISCELLANEOUSCOMMANDS

GS ( E EXECUTING + SETTING Set user setup commands CUSTOMIZECOMMANDS

GS ( H EXECUTINGCOMMAND Request transmission of response or status MISCELLANEOUSCOMMANDS

GS ( K SETTINGCOMMAND Select print control method(s) MISCELLANEOUSCOMMANDS

GS ( L GS 8 L EXECUTING + SETTING Define NV bit image BIT-IMAGECOMMANDS

GS ( N SETTINGCOMMAND Select character effects CHARACTERCOMMANDS

GS ( k EXECUTING + SETTING Set up and print the symbol TWODIMENSIONCODECOMMANDS

GS $ EXECUTINGCOMMAND Set absolute vertical print position in page mode PRINTPOSITIONCOMMANDS

GS SETTINGCOMMAND Define downloaded bit image BIT-IMAGECOMMANDS

GS / EXECUTINGCOMMAND Print downloaded bit image BIT-IMAGECOMMANDS

GS : SETTINGCOMMAND Start/end macro definition MACROFUNCTIONCOMMANDS

GS B SETTINGCOMMAND Turn white/black reverse print mode on/off CHARACTERCOMMANDS

GS H SETTINGCOMMAND Select print position of HRI characters BARCODECOMMANDS

GS I EXECUTINGCOMMAND Transmit printer ID MISCELLANEOUSCOMMANDS

GS L SETTINGCOMMAND Set left margin PRINTPOSITIONCOMMANDS

GS P SETTINGCOMMAND Set horizontal and vertical motion units MISCELLANEOUSCOMMANDS




19/880



GS V EXECUTINGCOMMAND Select cut mode and cut paper MECHANISMCONTROLCOMMANDS

GS W SETTINGCOMMAND Set print area widthPRINTPOSITIONCOMMANDS

GS \ EXECUTINGCOMMAND Set relative vertical print position in page mode PRINTPOSITIONCOMMANDS

GS ^ EXECUTINGCOMMAND Execute macro MACROFUNCTIONCOMMANDS

GS a EXECUTING + SETTING Enable/disable Automatic Status Back (ASB) STATUSCOMMANDS

GS b SETTINGCOMMAND Turn smoothing mode on/off CHARACTERCOMMANDS

GS f SETTINGCOMMAND Select font for HRI characters BARCODECOMMANDS

GS g 0 SETTINGCOMMAND Initialize maintenance counter MISCELLANEOUSCOMMANDS

GS g 2 EXECUTINGCOMMAND Transmit maintenance counter MISCELLANEOUSCOMMANDS

GS h SETTINGCOMMAND Set bar code height BARCODECOMMANDS

GS k EXECUTINGCOMMAND Print bar code BARCODECOMMANDS

GS r EXECUTINGCOMMAND Transmit status STATUSCOMMANDS

GS v 0 EXECUTINGCOMMAND Print raster bit image BIT-IMAGECOMMANDS

GS w SETTINGCOMMAND Set bar code width BARCODECOMMANDS




20/880



The following commands are supported only by Japanese/Simplified Chinese/Traditional Chinese/Korean supporting models.


FS ! SETTINGCOMMAND Set print mode(s) for Kanji charactersK

ANJIC

OMMANDS

FS & SETTINGCOMMAND Select Kanji character mode KANJICOMMANDS

FS SETTINGCOMMAND Turn underline mode on/off for Kanji characters KANJICOMMANDS

FS . SETTINGCOMMAND Cancel Kanji character mode KANJICOMMANDS

FS 2 SETTINGCOMMAND Define user-defined Kanji characters KANJICOMMANDS

FS C SETTINGCOMMAND Select Kanji character code system KANJICOMMANDS

FS S SETTINGCOMMAND Set Kanji character spacing KANJICOMMANDS

FS W SETTINGCOMMAND Turn quadruple-size mode on/off for Kanjicharacters KANJICOMMANDS



21/880


Paper roll TM-T90 supported commands Ver. 10.13 p. 21


Command Classification Name Function typeHT EXECUTINGCOMMAND Horizontal tab PRINTPOSITIONCOMMANDS











ESC SP SETTINGCOMMAND Set right-side character spacingCHARACTERCOMMANDS

ESC ! SETTINGCOMMAND Select print mode(s) CHARACTERCOMMANDS



TM-T90 SUPPORTED COMMANDS



22/880




ESC EXECUTINGCOMMAND Select bit-image modeB

IT-IMAGE

COMMANDS




















23/880



ESC \ EXECUTINGCOMMAND Set relative print positionP

RINTPOSITION

COMMANDS






ESC p EXECUTINGCOMMAND Generate pulse MISCELLANEOUSCOMMANDS


ESC { SETTINGCOMMANDTurn upside-down print mode on/off CHARACTERCOMMANDS





GS ( A EXECUTINGCOMMAND Execute test print MISCELLANEOUSCOMMANDS

GS ( C EXECUTING + SETTING Edit NV user memory CUSTOMIZECOMMANDS



http://l_misccmds/g2Lk_GS(A.pdfhttp://l_misccmds/g2Lk_GS(A.pdfhttp://l_misccmds/g2Lk_GS(A.pdfhttp://l_misccmds/g2Lk_GS(A.pdfhttp://l_misccmds/g2Lk_GS(A.pdfhttp://l_misccmds/g2Lk_GS(A.pdfhttp://l_misccmds/g2Lk_GS(A.pdfhttp://l_misccmds/g2Lk_GS(A.pdfhttp://l_misccmds/g2Lk_GS(A.pdfhttp://l_misccmds/g2Lk_GS(A.pdf


24/880



GS ( H EXECUTINGCOMMAND Request transmission of response or statusM

ISCELLANEOUSCOMMANDS


GS ( L GS 8 L EXECUTING + SETTING Set graphics data BIT-IMAGECOMMANDS

GS ( M SETTINGCOMMAND Customize printer control value(s) CUSTOMIZECOMMANDS











GS T EXECUTINGCOMMAND Set print position to the beginning of print line PRINTPOSITIONCOMMANDS


GS W SETTINGCOMMAND Set print area width PRINTPOSITIONCOMMANDS




25/880

















26/880




FS ! SETTINGCOMMAND Select print mode(s) for Kanji characters KANJI COMMANDS


FS ( A SETTINGCOMMAND Define character effects of Kanji characters. KANJICOMMANDS









27/880





FF (in page mode) EXECUTINGCOMMAND Print and return to standard mode PRINTCOMMANDS



DLE EOT EXECUTINGCOMMAND Real-time status transmission STATUSCOMMANDS

DLE ENQ EXECUTINGCOMMAND Real-time request to printer MISCELLANEOUSCOMMANDS

DLE DC4 (fn = 1) EXECUTINGCOMMAND Generate pulse at real-time MISCELLANEOUSCOMMANDS

DLE DC4 (fn = 2) EXECUTINGCOMMAND Turn off the power MISCELLANEOUSCOMMANDS

DLE DC4 (fn = 8) EXECUTINGCOMMAND Clear buffer MISCELLANEOUSCOMMANDS


ESC SP SETTINGCOMMAND Set right-side character spacing CHARACTERCOMMANDS








28/880


ESC EXECUTINGCOMMAND Select bit-image mode BIT-IMAGECOMMANDS

















ESC W SETTINGCOMMAND Set printing area in page mode PRINTPOSITIONCOMMANDS




29/880


ESC \ EXECUTINGCOMMAND Set relative print position PRINTPOSITIONCOMMANDS







ESC m EXECUTINGCOMMAND Partial cut (three points left uncut) MECHANISM CONTROL COMMANDS





ESC { SETTINGCOMMAND Turn upside-down printing mode on/off CHARACTERCOMMANDS




FS q EXECUTING + SETTING Define NV bit image BIT-IMAGECOMMANDS




30/880


FS ! SETTINGCOMMAND Set print mode(s) for Kanji characters KANJI COMMANDS










GS $ SETTINGCOMMAND Set absolute vertical print position in page mode PRINTPOSITIONCOMMANDS




GS ( E EXECUTING + SETTING User setup commands CUSTOMIZECOMMANDS

GS ( K SETTINGCOMMAND Select printing control MISCELLANEOUSCOMMANDS

GS ( L GS 8 L EXECUTING + SETTING Specify graphics data BIT-IMAGECOMMANDS




31/880


GS ( k EXECUTING + SETTING Specify and print the symbol TWODIMENSIONCODECOMMANDS




GS B SETTINGCOMMAND Turn white/black reverse printing mode on/off CHARACTERCOMMANDS

GS H SETTINGCOMMAND Select printing position of HRI characters BARCODECOMMANDS





GS W SETTINGCOMMAND Set printing area width PRINTPOSITIONCOMMANDS











32/880









33/880

Paper roll TM-L90 supported commands Ver. 10.13 p. 33

TM-L90 supported commands
















TM-L90 SUPPORTED COMMANDS


C d Cl ifi ti N F ti t


34/880
























35/880












FS ( L EXECUTINGCOMMAND Select label and black mark control function(s) PRINTINGPAPERCOMMANDS











36/880










GS \ EXECUTINGCOMMAND Print downloaded bit image BIT-IMAGECOMMANDS














37/880


















38/880














TM-J2000/J2100 supported commands


39/880

Paper roll TM-J2000/J2100 supported commands Ver. 10.13 p. 39









DLE DC4 (fn = 1) EXECUTINGCOMMANDGenerate pulse in real-time MISCELLANEOUSCOMMANDS








TM-J2000/J2100 SUPPORTED COMMANDS




40/880







ESC < EXECUTINGCOMMAND Return home MECHANISMCONTROLCOMMANDS













yp




41/880


ESC U SETTINGCOMMAND Turn unidirectional print mode on/off MECHANISMCONTROLCOMMANDS





ESC c 3 SETTINGCOMMAND Select paper sensor(s) to output paper-end

signals PAPERSENSORCOMMANDSESC c 4 SETTINGCOMMAND Select paper sensor(s) to stop printing PAPERSENSORCOMMANDS




ESC r SETTINGCOMMAND Select print color CHARACTERCOMMANDS










42/880











GS \ EXECUTINGCOMMAND Print downloaded bit image BIT-IMAGECOMMANDS







GS Q 0 EXECUTINGCOMMAND Print variable vertical size bit image BIT-IMAGECOMMANDS



http://f_printpositioncmds/g2Fj_GST.pdfhttp://f_printpositioncmds/g2Fj_GST.pdfhttp://f_printpositioncmds/g2Fj_GST.pdfhttp://f_printpositioncmds/g2Fj_GST.pdfhttp://f_printpositioncmds/g2Fj_GST.pdfhttp://f_printpositioncmds/g2Fj_GST.pdfhttp://f_printpositioncmds/g2Fj_GST.pdf


43/880












GS j EXECUTING + SETTING Enable/disable Automatic Status Back (ASB) forink STATUSCOMMANDS








44/880





FS ( A SETTINGCOMMAND Select Kanji character style(s) KANJICOMMANDS







FS ? SETTINGCOMMAND Cancel user-defined Kanji characters KANJICOMMANDS




45/880

Paper roll TM-U220 supported commands Ver. 10.13 p. 45





DLE EOT EXECUTINGCOMMANDTransmit real-time status STATUSCOMMANDS







ESC ( A EXECUTING + SETTING Control beeper tones MISCELLANEOUSCOMMANDS





TM-U220 SUPPORTED COMMANDS


http://f_printpositioncmds/g2Fa_HT.pdfhttp://f_printpositioncmds/g2Fa_HT.pdf


46/880










ESC K EXECUTINGCOMMAND Print and reverse feed PRINTCOMMANDS












47/880


ESC e EXECUTINGCOMMAND Print and reverse feed n lines PRINTCOMMANDS

ESC i EXECUTINGCOMMAND Partial cut (one point left uncut) MECHANISMCONTROLCOMMANDS

ESC m EXECUTINGCOMMAND Partial cut (three points left uncut) MECHANISMCONTROLCOMMANDS




ESC u EXECUTINGCOMMAND Transmit peripheral device status STATUSCOMMANDS

ESC v EXECUTINGCOMMAND Transmit paper sensor status STATUSCOMMANDS







FS C SETTING

COMMAND

Select Kanji character code system KANJICOMMANDSFS S SETTINGCOMMAND Set Kanji character spacing KANJICOMMANDS





48/880


FS ? SETTINGCOMMAND Cancel user-defined Kanji characters KANJICOMMANDS


FS q EXECUTING + SETTING Define NV bit image BIT-IMAGECOMMANDS











TM-U230 SUPPORTED COMMANDS


49/880



















TM U230 SUPPORTED COMMANDS


ESC ?



50/880








ESC K EXECUTINGCOMMAND Print and reverse feed PRINTCOMMANDS








ESC e EXECUTINGCOMMAND Print and reverse feed n lines PRINTCOMMANDS




ESC t S S l t h t d t bl



51/880









GS z 0 SETTINGCOMMAND Set online recovery wait time MISCELLANEOUSCOMMANDS


TM-P60 supported commands

TM-P60 SUPPORTED COMMANDS


52/880

Paper roll TM-P60 supported commands Ver. 10.13 p. 52









DLE DC4 (fn = 7 ) EXECUTING + SETTING Transmit specified status in real-time MISCELLANEOUSCOMMANDS










ESC = SETTING COMMAND Select peripheral device MISCELLANEOUS COMMANDS


53/880



















FS ( L EXECUTINGCOMMAND Select label and black mark control function(s) PRINTINGPAPERCOMMANDS



GS ! SETTING COMMAND Select character size CHARACTER COMMANDS
http://l_misccmds/g2Ld_ESC=.pdf


54/880











GS ( P EXECUTINGCOMMAND Page mode control CUSTOMIZECOMMANDS

GS ( Q EXECUTINGCOMMAND Commands for drawing graphics CUSTOMIZECOMMANDS











55/880














TM-T88V SUPPORTED COMMANDS


56/880

Paper roll TM-T88V supported commands Ver. 10.13 p. 56





CR EXECUTINGCOMMAND Print and carriage return PRINTCOMMANDSCAN EXECUTINGCOMMAND Cancel print data in page mode CHARACTERCOMMANDS





DLE DC4 (fn = 3) EXECUTINGCOMMAND Sound buzzer in real-time MISCELLANEOUSCOMMANDS







ESC % SETTINGCOMMAND Select/cancel user-defined character set CHARACTER COMMANDS



57/880


CHARACTERCOMMANDS






















58/880






















59/880




FS q EXECUTINGCOMMAND Define NV bit image BIT-IMAGECOMMANDS

FS ( E EXECUTING + SETTING Group of commands for receipt enhancementcontrol MISCELLANEOUSCOMMANDS














GS D EXECUTING + SETTING Speciy Windows BMP graphics data BIT-IMAGECOMMANDS



60/880






















61/880




FS ! SETTINGCOMMAND Set print mode(s) for Kanji characters KANJI COMMANDS


FS ( A SETTINGCOMMAND Select Kanji character style(s) KANJICOMMANDS











62/880






CR EXECUTINGCOMMAND Print and carriage returnPRINTCOMMANDS






DLE DC4 (fn = 3) EXECUTINGCOMMAND Sound buzzer in real-time MISCELLANEOUSCOMMANDS










63/880























64/880




















FS q EXECUTINGCOMMAND Define NV bit image BIT-IMAGECOMMANDS



65/880


FS ( E EXECUTING + SETTING Group of commands for receipt enhancementcontrol

MISCELLANEOUSCOMMANDSGS ( A EXECUTINGCOMMAND Execute test print MISCELLANEOUSCOMMANDS












GS D EXECUTING + SETTING Speciy Windows BMP graphics data BIT-IMAGECOMMANDS

GS H SETTINGCOMMAND Select print position of

2011 Guide Epson Roll Paper 10.13

Documents

Transcript of 2011 Guide Epson Roll Paper 10.13