2007 Holland Catalog Email

For over 20 years, Holland Electronics LLC has earned a reputation as an innovator in the CATV, SMATV,

Satellite, Wireless and Fiber Optic markets specializing in connectivity, broadband distribution, head-end

and installation accessories. Having facilities and staff in both the USA and Asia, we have been success-

ful in providing the quality and reliability demanded by today’s evolving and emerging telecommunications

industries.

This unique structure enables us to provide custom tailored solutions to our customers in a short period of

time. Beginning with the idea, our own experienced technical staff can design and develop a solution that

will meet your needs. Our in house abilities include CNC machining, screw machines, diecasting, injection

molding, stamping and many second operation machines. Our years of experience with these processes

ensures our customers efficient solutions to the demands of today’s telecommunications needs.

We are committed to providing our customers with the personalized service and cost effective solutions

that has earned us your trust in the past and will continue to strengthen our relationship into the future.

Michael HollandCEO

TABLE OF CONTENTS

2935 Golf Course Drive Ventura, CA 93003 (800) 628-4511 FAX (805) 339-0230 www.hollandelectronics.com | 1

AMPLIFIERSAmplifier Selection Chart. . . . . . . . . . . . . . . . . . . . . . . . . 2Antenna/Home. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3, 4Broadband Distribution . . . . . . . . . . . . . . . . . . . . . . . . 5, 6CATV/MDU Distribution . . . . . . . . . . . . . . . . . . . . . . . 7-12Drop/Subscriber . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13, 14In-Line . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15, 16Satellite . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17, 18

COAXIAL CABLE & JUMPER ASSEMBLIESCoaxial Drop Cable . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19Mini Precision Video Coaxial Cables. . . . . . . . . . . . . . 20Molded Patchcords & Interconnects . . . . . . . . . . . . . 21Jumpers & Cable Assemblies. . . . . . . . . . . . . . . . . . . . 22

CONNECTORS & ADAPTERSSLCU Series Compression Connectors . . . . . . . . . 23-26Attached Ring Crimp Connectors. . . . . . . . . . . . . . 27, 28Mini Coax Series Connectors . . . . . . . . . . . . . . . . . 29, 30Adapters & Terminators. . . . . . . . . . . . . . . . . . . . . . . . . 31Attenuators / CATV Security Products . . . . . . . . . . . . 32Splices . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33, 34Grounding Hardware . . . . . . . . . . . . . . . . . . . . . . . . 35, 36OEM Capabilities. . . . . . . . . . . . . . . . . . . . . . . . . . . . 37, 38

FIBER OPTICCATV Optical Transmitters. . . . . . . . . . . . . . . . . . . . 39, 40CATV Optical Receivers . . . . . . . . . . . . . . . . . . . . . . 41, 42CATV Optical Amplifiers. . . . . . . . . . . . . . . . . . . . . . 43, 44Fiber Optic Distribution System . . . . . . . . . . . . . . . 45-47

FILTER / DIPLEXERSSingle Channel Filters. . . . . . . . . . . . . . . . . . . . . . . . . . . 49High Pass/Custom Filters. . . . . . . . . . . . . . . . . . . . . . . . 50Filters / Diplexers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 51Cable Drop Protection . . . . . . . . . . . . . . . . . . . . . . . . . . 52

HEAD-END PRODUCTSMini Modular Head-End System . . . . . . . . . . . . . . 53, 56Fixed Channel Modulators . . . . . . . . . . . . . . . . . . . 57, 58Agile Modulators. . . . . . . . . . . . . . . . . . . . . . . . . . . . 59, 60Saw Filtered Modulators . . . . . . . . . . . . . . . . . . . . . 61, 62Agile Processors. . . . . . . . . . . . . . . . . . . . . . . . . . . . 63, 64Demodulators . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 65, 66Single Channel Amplifier . . . . . . . . . . . . . . . . . . . . . 67, 68Rack Mounted Amplifiers . . . . . . . . . . . . . . . . . . . . 69, 70Head-End Combiners . . . . . . . . . . . . . . . . . . . . . . . . 71, 72Rack Mounted Multiswitches. . . . . . . . . . . . . . . . . 73, 74Sub-Band to High-Band Converters . . . . . . . . . . . 75, 76Head-End Accessories . . . . . . . . . . . . . . . . . . . . . . 77, 78Pre-Built Head-End Systems. . . . . . . . . . . . . . . . . . . . . 78

HOME CONSUMER PRODUCTSMultimedia Modulators . . . . . . . . . . . . . . . . . . . . . . 79, 80Signal Combiners / AB Switches . . . . . . . . . . . . . . . . . 81Video Cameras. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 82

INSTALLATION MATERIALSWall Plates . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 83Bushings, Cable Clips / Ties, Weather Boots. . . . . . . 84Enclosures, Tape, Sealants . . . . . . . . . . . . . . . . . . . . . . 85Hardware . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 86

PASSIVESBroadband Splitters . . . . . . . . . . . . . . . . . . . . . . . . . 87, 88Digital CATV Splitters . . . . . . . . . . . . . . . . . . . . . . . . 89,90Premium Digital CATV Splitters . . . . . . . . . . . . . . . 91, 92Satellite Broadband Splitters . . . . . . . . . . . . . . . . . 93, 94Directional Couplers . . . . . . . . . . . . . . . . . . . . . . . . . 95-98High Performance Satellite Splitters. . . . . . . . . . 99, 100Specialty Splitters / Power Inserters . . . . . . . . 101, 102Hard-Line Multi Taps . . . . . . . . . . . . . . . . . . . . . . 103, 104Hard-Line Passives. . . . . . . . . . . . . . . . . . . . . . . . 105, 106

SATELLITEDiplexers. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 107Passives . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 108Multiswitches . . . . . . . . . . . . . . . . . . . . . . . . . . . . 109, 110Stackers & Destackers . . . . . . . . . . . . . . . . . . . . . . . . 111Satellite Distribution Systems. . . . . . . . . . . . . . . . . . . 112

TELEPHONE/DATA ACCESSORIESStation Wire/Surface Jacks/Cord Sets . . . . . . . . . . . 113Adapters/Couplers/Modular Plugs . . . . . . . . . . . . . . 113

TEST EQUIPMENTSatellite Finder/Cable Ringer/Cable Ringer Kit . . . . 114MDU Cable ID System . . . . . . . . . . . . . . . . . . . . . . . . . 114Test Meters/Receivers . . . . . . . . . . . . . . . . . . . . . 115-118

TOOLSHex Crimp & Compression Tools . . . . . . . . . . . . . . . . 119Coax Cable Strippers . . . . . . . . . . . . . . . . . . . . . . . . . . 119Cable Conductor Guide/Installation Tools . . . . . . . . 120Locking Terminators/Drill Bits. . . . . . . . . . . . . . . . . . . 120

INDEX . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .121-122

CATV/MDU DISTRIBUTION AMPLIFIERS

AMPLIFIER SELECTION CHART

2935 Golf Course Drive Ventura, CA 93003 (800) 628-4511 FAX (805) 339-0230 www.hollandelectronics.com2 |

MODELSFREQUENCY

(MHz)

RETURNBANDWIDTH

(MHz)

CHANNELCAPACITY

GAIN(dB)

MAXIMUMOUTPUT(dBmV)

RETURNPATH

(Gain,dB)ADJ.’S NOTES

HA-201T 50 - 500 – – 20 43 (7 Ch.) – Slope Small CATV

HA-3054 - 108174 - 216 – – 31 52 (7 Ch.) – Gain Antenna

HDA-10 50 - 900 – – 10 35 (7 Ch.) – – Home, Economy

HDA-1554 - 216470 - 890 – – 15 50 (7 Ch.) – – Home, CATV

HDA-25 54 - 1000 – – 25 48 (7 Ch.) – – Home, CATV

HDA-25E 54 - 800 – – 25 40 (7 Ch.) – Gain Home, Economy

HDA-30 54 - 1000 – – 30 50 (7 Ch.) – Gain Home Distribution

HDA-3654 - 108174 - 216470 - 800

– – 36 54 (7 Ch.) – Gain Antenna / MDU

HDA-1000 54 - 1000 – 157 34 57 (7 Ch.) P Gain High Channel Capacity

BROADBAND

HCA-3051 54 - 550 – 77 30 45 – Gain/Slope CATV Hybrid Amplifier

HCA-5051 54 - 550 – 77 50 45 – Gain/Slope CATV Hybrid Amplifier

HCA-3086RP 54 - 860 5 - 42 134 30 41 P (-2 dB) Gain/Slope CATV Hybrid Amplifier

HCA-3051RK 54 - 550 – 77 30 45 – Gain/Slope CATV Hybrid Amplifier

HCA-3086RK 54 - 860 5 - 42 134 30 41 P (-2 dB) Gain/Slope CATV Hybrid Amplifier

HCA-36ERA 54 - 750 5 - 40 116 36 42 A (18 dB) Gain/Slope Bi-Directional, Hybrid

HCDA-1 54 - 1000 5 - 42 157 15 25 P (-2 dB) – Cable Drop

HCDA-2 54 - 1000 5 - 42 157 11 21.5 P (-2dB) – Cable Drop

HCDA-4 54 - 1000 5 - 42 157 7 18 P (-2 dB) – Cable Drop

HCDA-1FRA 54 - 1000 5 - 42 157 15 25 A (10 dB) – Cable Drop

HCDA-1RA 54 - 1000 5 - 42 3 -2 dB – A (10 dB) – Cable Drop

CATV

LA-141ALA-142ALA-143A

250 - 2150 – 32 Trns. + Ka 14-14 dBm-14 dBm-14 dBm

– – Auto LevelingDBS Drop Amps

NA2530A-T 250 - 2150 – 32 Trns. + Ka 30 -1 dBm – – Dual Node Amp

PA2530A-T 250 - 2150 – 32 Trns. + Ka 30 – – – Power LNB

PAL1-TPAL5-TPAL10-T

950 - 2150 – 32 Trns. + Ka404040

-1 dBm-5 dBm-10 dBm

– – Auto LevelingGain Control

TA2330D-T 950 - 2150 – 32 Trns. + Ka 30 -1 dBm – – Generates 13/18v

SATELLITE

P= Passive A= Active. Maximum output specified at full channel loading unless otherwise indicated.

ANTENNA / HOME AMPLIFIERS

HA SERIESMODELS HA-201T : HA-30

Low Noise Figure

Adjustable Slope Control (HA-201T)

High Input Capability

FM Trap (HA-30)

Output Test Port (HA-30)

FEATURES

The HA-201T is a low noise, high output amplifier well

suited for small channel capacity CATV amplification

where slope adjustment is needed.

HA-201T : 20 DB LOW NOISE AMPLIFIER

The HA-30 has been specially designed for MDU, off-air

VHF antenna systems requiring separate Hi/Lo band level

controls, FM traps, high gain and high output.

HA-30 : 30 DB VHF/FM AMPLIFIER


CUSTOMER NOTES:DD

MODEL HA-201T MODEL HA-30

ANTENNA / HOME AMPLIFIERS

HA SERIES

2935 Golf Course Drive Ventura, CA 93003 (800) 628-4511 FAX (805) 339-0230 www.hollandelectronics.com

SPECIFICATIONS

FORWARD PATH HA-201T HA-30

Frequency 50 - 500 MHz 54 - 108, 174 - 216 MHz

Gain 20 dB 31 dB

Gain Adjustment Range – 15 dB

FM Trap – (2) -20 dB (Switchable)

Maximum Input (7 Ch.) 23 dBmV 21 dBmV

Maximum Output (7 Ch.) 43 dBmV 52 dBmV

Slope 8 dB (Adj.) –

GENERAL

Power Requirements 117VAC, 60 Hz, 3 W 117VAC, 60 Hz, 3 W

Operating Temperature -20˚ to 60˚ Celsius -20˚ to 60˚ Celsius

Dimensions 3.5” x 2” x 1.25” 8.375” x 3.75” x 2”

Weight .7 lbs. 2.25 lbs.

4 |

NOTE: All specifications typical unless otherwise noted

HDA SERIESMODELS HDA-10 : HDA-15 : HDA-25 : HDA-25E : HDA-30 : HDA-36

High Input / Output Capability

Switchable FM Trap (HDA-25,30)

Low Distortion

Adjustable Gain (HDA-30, HDA-36)

FEATURES

The HDA-10 / HDA-15 are all purpose amplifiers for home or

small system applications requiring performance at an

economical price.

HDA-10/HDA-15 : 10/15 DB VHF/UHF AMPLIFIERS

The HDA-36 is the most versatile of our off-air amplifiers

providing high gain and output for all off-air signals as well

as independent band gain adjustments and FM traps.

HDA-36 : OFF-AIR, MDU AMPLIFIER

The HDA-25 is a full spectrum, high output, general purpose

amplifier. The high output capability provides lower

distortion than economy models while maintaining quality

and reliability for the most sophisticated applications.

HDA-25 : 25 DB HIGH OUTPUT AMPLIFIER

The HDA-30 has been specifically designed for the high

end home distribution market where a flat, full bandwidth

amplifier is required. The low noise and high output

capability make this amplifier ideal for systems with either

the weakest or strongest input signals.

HDA-30 : 30 DB OFF-AIR, MDU AMPLIFIER

* ALSO AVAILABLE IN ECONOMY MODEL HDA-25E.


CUSTOMER NOTES:DD

BROADBAND DISTRIBUTION AMPLIFIERS

MODEL HDA-10

MODEL HDA-25/HDA-25E

MODEL HDA-30

MODEL HDA-36

MODEL HDA-15

HDA SERIES


BROADBAND DISTRIBUTION AMPLIFIERS

FORWARD PATH HDA-10 HDA-15 HDA-25 HDA-25E

Frequency 50 - 900 MHz 54 - 216 MHz, 470 - 890 MHz 54 - 1000 MHz 54 - 800 MHz

Gain 10 dB 15 dB (54-216 MHz)12dB (470-890 MHz)

25 dB 25 dB (54-450 MHz)22 dB (450-800 MHz)

Gain Adjustment Range – – – –

FM Trap – – 20 dB (Switchable) 20 dB (Switchable)

Maximum Input (7 Ch.) 25 dBmV 35 dBmV VHF, 37 dBmV UHF 23 dBmV 15 dBmV

Maximum Output (7 Ch.) 35 dBmV 50 dBmV 48 dBmV 40 dBmV

Noise Figure 5 dB 5 dB VHF, 6 dB UHF 5 dB VHF, 7 dB UHF –

GENERAL

Power Requirements 117VAC, 60 Hz, 3 W 117VAC, 60 Hz, 3 W 117VAC, 60 Hz, 2 W 117VAC, 60 Hz, 2 W

Operating Temperature -20˚ to 60˚ Celsius 0˚ to 50˚ Celsius -20˚ to 60˚ Celsius -20˚ to 60˚ Celsius

Dimensions 2.5” x 3.75” x 1.375” 4.5” x 3.25” x 1.25” 5.5” x 3” x 1.625” 5” x 3.25” x 1.5”

Weight .9 lbs. 1 lb. 1.25 lbs. .9 lbs.

SPECIFICATIONS

FORWARD PATH HDA-30 HDA-36

Frequency 54 - 1000 MHz 54 - 108 MHz, 174 - 216 MHz, 470 - 800 MHz

Gain 30 dB 31 dB VHF, 36 dB UHF

Gain Adjustment Range 8 dB 15 dB

FM Trap 25 dB (Switchable) 20 dB (Switchable)

Maximum Input (7 Ch.) 28 dBmV 37 dBmV

Maximum Output (7 Ch.) 50 dBmV 52 dBmV VHF, 54 dBmV UHF

GENERAL


Operating Temperature 0˚ to 50˚ Celsius -20˚ to 60˚ Celsius

Dimensions 4.5” x 3.25” x 1.25” 8” x 4.5” x 2”

Weight 1 lb. 2.5 lbs.



1 GHZ AMPLIFIERMODEL HDA-1000

Low Distortion, High Channel Capacity

Bi-Directional (Passive Return)

34 dB Gain

Wide Frequency Range (54-1000 MHz)

Push-Pull, SMD Circuitry

High Output

FEATURES

The HDA-1000 is a unique amplifier combining the features

of our push-pull, high output designs with an extended

1,000 MHz range; making this amplifier applicable to CATV,

off-air, wireless and RF data distribution. The “SMD” sur-

face mount design insures reliability and performance at

the highest frequencies.

Separate gain and slope controls and a passive return path

make this amp ideal for large homes and MDU’s.

HDA-1000 : 1 GHz BI-DIRECTIONAL AMPLIFIER


CUSTOMER NOTES:

MODEL HDA-1000

DD

GREAT FOR DIGITAL APPLICATIONS


1 GHZ AMPLIFIER

8 |

SPECIFICATIONS

FORWARD PATH HDA-1000

Frequency 54 - 1000 MHz

Gain 34 dB

Gain Adjust Range 15 dB

Maximum Input (135 Ch.) 5 dBmV

Maximum Output (135 Ch.) 39 dBmV

Flatness 54 - 750 MHz ±1 dB750 - 1000 MHz ±1.5 dB

Noise Figure 6 dB

Cross Modulation (XMOD) -65 dB (77 Ch.)

Composite Second Order (CSO) -65 dB (77 Ch.)

Composite Triple Beat (CTB) -70 dB (77 Ch.)

RETURN PATH


Gain Passive (-2.5 dB)

GENERAL

Power Requirements 117VAC, 60 Hz, 6 W

Operating Temperature -10˚ to 55˚ Celsius

Dimensions 8” x 3.375” x 2”

Weight 3 lbs.




HCA SERIESMODELS HCA-3051 : HCA-5051 : HCA-3086RP : HCA-3051RK : HCA-3086RK

Low Distortion CATV Hybrid Amplifiers

High Output

Large Heatsink Case

550 and 860 MHz Models

Adjustable Gain & Slope

High Gain (30 or 50 dB)

Return Path (Selected Models)

FEATURES

The HCA series amplifiers incorporate high quality push-

pull, hybrid modules to provide the highest output and

lowest distortion levels possible. A regulated power supply,

along with an extra large heatsink case, provide the

reliability required for operation in even the most extreme

environments. The HCA series is available in 30 or 50 dB

gain, 550 or 860MHz bandwidth, and a 120 or 220VAC power

supply (220VAC optional). Rack mounted models available.

HCA SERIES


CUSTOMER NOTES:DD

MODEL HCA-3051

MODEL HCA-3086RK

MODEL HCA-3086RP


HCA SERIES


FORWARD PATH HCA-3051* HCA-5051 HCA-3086RP HCA-3086RK

Frequency 54 - 550 MHz 54 - 550 MHz 54 - 860 MHz 54 - 860 MHz

Gain 30 dB 50 dB 30 dB 30 dB

Gain Adjust Range 18 dB 18 dB 18 dB 18 dB

Maximum Input 15 dBmV (77 Ch.) -5 dBmV ** 11 dBmV (134 Ch.) 11 dBmV (134 Ch.)

Maximum Output 45 dBmV (77 Ch.) 45 dBmV (77 Ch.) 41 dBmV (134 Ch.) 41 dBmV (134 Ch.)

Slope 15 dB (Adj.) 12 dB (Adj.) 15 dB (Adj.) 15 dB (Adj.)

Flatness ±1 dB ±1 dB ±1 dB ±1 dB

Noise Figure 6.5 dB 6.5 dB 6.5 dB 6.5 dB

Input Return Loss (Min.) 12 dB 12 dB 12 dB 12 dB

Output Return Loss (Min.) 12 dB 12 dB 12 dB 12 dB

Cross Modulation (XMOD) -58 dB -58 dB -58 dB -58 dB

Composite Second Order (CSO) -75 dB -75 dB -75 dB -75 dB

Composite Triple Beat (CTB) -60 dB -60 dB -60 dB -60 dB

RETURN PATH

Frequency – – 5 - 42 MHz –

Gain – – Passive (-2.5 dB) –

GENERAL

Power Requirements 117VAC, 60Hz, 8 W 117VAC, 60Hz, 8 W 117VAC, 60Hz, 8 W 117VAC, 60Hz, 8 W

Operating Temperature -20˚ to 60˚ Celsius -10˚ to 50˚ Celsius -20˚ to 60˚ Celsius -20˚ to 60˚ Celsius

Dimensions 8” x 5.375” x 2” 7.75” x 3” x 1.75” 8” x 3” x 1.75” 17” x 3” x 1.75”

Weight 3.5 lbs. 2.55 lbs. 2.55 lbs. 4.35 lbs.

SPECIFICATIONS

10 |

* Rack mount model available. (Model HCA-3051RK)

** Maximum input specified at full channel capacity. Full gain at maximum channel capacity is not recommended.

Maximum input increases as channel load decreases.

Please see our support section at www.hollandelectronics.com for channel loading application sheet.


BI-DIRECTIONAL CATV AMPLIFIER


BI-DIRECTIONAL CATV AMPLIFIERMODEL HCA-36ERA

54-750 MHz Forward Operation

Variable EQ & Gain Control

Input & Output Test Ports(Forward & Reverse)

Bi-Directional (Amplified Return)

High Output with Low Distortion

High Return Input Level Capability

FEATURES

Our highest performance CATV Amplifier provides a two-

way amplified capability with very low distortion from the

use of two hybrid amplifier stages with inter-stage slope

and gain controls. The variable controls in both directions

make this amplifier ideal for use in larger MDU installations.

750 MHZ BI-DIRECTIONAL CATV AMPLIFIER


CUSTOMER NOTES:DD

MODEL HCA-36ERA


BI-DIRECTIONAL CATV AMPLIFIER


FORWARD PATH HCA-36ERA


Gain 36 dB

Gain Adjustment Range 15 dB (Adj.)



Slope 12 dB

Flatness ±1 dB

Noise Figure 7 dB

Cross Modulation (XMOD) -60 dB

Composite Second Order (CSO) -65 dB

Composite Triple Beat (CTB) -62 dB

RETURN PATH


Gain 18 dB

Adjustment Range 10 dB

Flatness ±1 dB

EQ Adjustment Range 10 dB



GENERAL

Power Requirements 117VAC, 60Hz, 18 W


Dimensions 9.5” x 6.5” x 2.5”

Weight 5.5 lbs.

SPECIFICATIONS

EE

EE

e e

e

EQ AMP

Amp Slope Gain

Slope Gain Amp

INPUT OUTPUT

FORWARD PATH

REVERSE PATH

/ /

/ /

/


DROP / SUBSCRIBER AMPLIFIERS

HCDA SERIESMODELS HCDA-1/FRA/RA, 2, 4

1 GHz Bandwidth

Hermetically Sealed Case & Ports

Low Noise Figure: 3 dB

High Return Input Capability

Direct or Line Powering Capability

High Return Loss

Surge Protected (IEE C62.41-1991, All Ports)

130 dB RFI Shielding

LED Power Indicator

FEATURES

The HCDA Series is the top of the line CATV drop/subscriber

amplifier. The HCDA amplifiers are unsurpassed in

environmental ruggedness with sealed “F” ports, powder

coated paint, and a RFI hermetically sealed back plate. This

amplifier comes in one, two and four output port models,

with active or passive return.

The HCDA-1FRA is the same quality drop amplifier as the rest

of the HCDA Series, with the addition of reverse

amplification to overcome return path loss.

The HCDA-1RA provides amplification to the return path

only, forward path passive.

HCDA-1/FRA/RA, 2, 4BI-DIRECTIONAL CABLE DROP AMPLIFIER


CUSTOMER NOTES:

MODEL HCDA-1/FRA/RA

MODEL HCDA-2

MODEL HCDA-4

The HCDA-PI power inserter

allows amplifier powering

through an existing output cable.

HCDA POWERING OPTIONS

MODEL HCDA-PI

DD

DROP / SUBSCRIBER AMPLIFIERS

HCDA SERIES


FORWARD PATH HCDA-1 HCDA-2 HCDA-4 HCDA-1FRA HCDA-1RA

Frequency 54 - 1000 MHz 54 - 1000 MHz 54 - 1000 MHz 54 - 1000 MHz 54 - 1000 MHz

Gain 15 dB 11 dB 7 dB 15 dB -1.5 dB

Maximum Input (157 Ch.) 7 dB 7 dB 7 dB 7 dB –

Maximum Output (79 Analog Chs. & 33 Digital Chs.)

25 dBmV 21.5 dBmV 18 dBmV 25 dBmV –

Slope – – – – –

Flatness ±1 dB ±1 dB ±1 dB ±1 dB ± 1 dB

Group Delay See Table Below See Table Below See Table Below – –

Noise Figure 3 dB 3 dB 3 dB 3 dB –

Input Return Loss 20 dB 20 dB 20 dB 20 dB 18 dB

Output Return Loss 20 dB 20 dB 20 dB 20 dB 18 dB

Cross Modulation (XMOD) -75 dB -75 dB -75 dB -75 dB –

Composite Second Order (CSO) -62 dB -62 dB -62 dB -62 dB –

Composite Triple Beat (CTB) -75 dB -75 dB -75 dB -75 dB –

RETURN PATH

Frequency 5 - 42 MHz 5 - 42 MHz 5 - 42 MHz 5 - 42 MHz 5 - 42 MHz

Gain Passive (-1 dB) Passive (-4.5 dB) Passive (-8 dB) 10 dB 10 dB

Flatness ± .5 dB ± .5 dB ± .5 dB ±1 dB ± 1 dB

Group Delay See Table Below See Table Below See Table Below – –

Maximum Input (1 Ch.) – – – 45 dBmV 45 dBmV

Maximum Output (1 Ch.) – – – 55 dBmV 55 dBmV

GENERAL

Power Requirements 12VDC, 2.4W 12VDC, 2.4W 12VDC, 2.4W 12VDC, 3.6W 12VDC, 1.2W

Operating Temperature -40˚ to 60˚ Celsius -40˚ to 60˚ Celsius -40˚ to 60˚ Celsius -40˚ to 60˚ Celsius -40˚ to 60˚ Celsius

Dimensions 2.5” x 4.5” 2.5” x 4.5” 2.5” x 4.5” 2.5” x 4.5” 2.5” x 4.5”

Weight 1 lb. (w/adapter) 1 lb. (w/adapter) 1 lb. (w/adapter) 1 lb. (w/adapter) 1 lb. (w/adapter)

GROUP DELAY : FORWARD PATH (HCDA 1, 2 & 4 : 54 - 1000 MHz)

20 ns Max. For Ch. 2, 3.58 MHz Span

10 ns Max. For Ch. 3, 3.58 MHz Span

5 ns Max. For All Other Channels, 3.58 MHz Span

GROUP DELAY : RETURN PATH (HCDA 1, 2 & 4 : 5 - 42 MHz)

20 ns Max. 5 - 42 MHz, 2 MHz Span

5 ns Max. 10 - 36 MHz, 1 MHz Span

SPECIFICATIONS

14 |


IN-LINE AMPLIFIERS

LA SERIESMODELS LA-10 : LA-520 : LA-2150H

Line Powered

Low Noise Figure

Optional Power Inserter (PS-10)

Wideband & High Output Models

Hermetically Sealed / Outdoor Rated

FEATURES

When extra amplification is needed, Holland Electronic’s

LA Series small in-line amplifiers are the choice of industry

professionals world-wide. The LA Series can be powered

with existing line voltage, or used with the optional PS-10

power inserter.

LINE POWERED AMPLIFIERS

The LA-10 is a full band (5-900 MHz) 10 dB gain, CATV,

UHF/VHF line amplifier with medium output capability.

LA-10

Our most versatile line amplifier with wideband capabilities

from 50 to 2050 MHz and 20 dB gain.

LA-520

This high-output line amplifier has been specifically

designed for satellite systems with a frequency range of

950 to 2150 MHz and 20 dB gain.

LA-2150H


CUSTOMER NOTES:

MODEL LA-10 MODEL LA-520 MODEL LA-2150H

DD

IN-LINE AMPLIFIERS

LA SERIES


FORWARD PATH LA-10 LA-520 LA-2150H

Frequency 5 - 900 MHz 50 - 2050 MHz 950 - 2150 MHz

Gain 10 dB 20 dB 20 dB

Maximum Input 20 dBmV (7 Ch.) -38 dBm (16 Trns.) -35 dBm (16 Trns.)

Maximum Output 30 dBmV -18 dBm (16 Trns.) -15 dBm (16 Trns.)

Noise Figure 4 dB 5 dB 5 dB

GENERAL

Power Requirements 12 - 18VDC @ 40 mA 12 - 18VDC @ 50 mA 12 - 18VDC @ 50 mA

Dimensions 2.3” x .75” 2.25” x 1” x .75” 3.5” x 1” x .75”

Weight .05 lbs. .15 lbs. .15 lbs.

SPECIFICATIONS

The PS-10 is an optional UL listed power supply and inserter for the

LA Series line amplifiers or other DC line powered amplifiers.

PS-10


AC In 117VAC

DC Out 15VDC @ 100 mA

LA SERIES POWERING OPTIONS

MODEL PS-10


SATELLITE AMPLIFIERS

SATELLITE AMPLIFIERSMODELS PAL*-T : LA-* : NA2530A-T : PA2530A-T : TA2330D-T

High Return Loss

Flat Signal Response

Slope Compensation

Multiple Powering Options

Automatic Gain Control (PAL Series)

Ka Models Available

FEATURES

The PAL Series amplifiers provide unmatched auto

leveling/auto gain performance. Within fractions of a sec-

ond, they respond to signal strength variations due to rain

fade and atmospheric variables to provide a constant and

stable fixed output; making them ideal for MDU Distribution.

The PAL amplifiers come in -1, -5, -10, -20 and -30 dBm power

outputs.

PAL1-T, 5-T, 10-T, 20-T, 30-TAUTO GAIN CONTROL DISTRIBUTION AMPLIFIERS

The LA Series drop amplifiers compensate for approximately

200 feet of coaxial cable loss between the LNB & DBS

receiver. They offer 14 dB of gain and 4 dB of slope

compensation. These amplifiers are receiver powered,

outdoor capable and pass 22 kHz/DiSEqC control signals.

MADE IN USA

LA-141A, 142A, 143ALINE AMPLIFIERS

The NA2530A-T & TA2330D-T fixed gain amplifiers, with their

slope compensation and high return loss, make them ideal for

driving DBS distribution systems.

The TA2330D-T model powers dual LNB’s. The NA2530A-T

also comes in a dual input/dual output model.

NA2530A-T : TA2330D-TFIXED GAIN DISTRIBUTION AMPLIFIERS


UL®

| 17

CUSTOMER NOTES:DD

PAL SERIES LA SERIES NA/PA/TA SERIES




FORWARD PATH PAL1-T,5-T,10-T,20-T,30-T LA-141A,142A,143A NA2530A-T TA2330D-T

Frequency 950 - 2150 MHz 250 - 2400 MHz 250 - 2150 MHz 950 - 2150 MHz

Gain 20 dB (PAL-1,5,10)30 dB (PAL-20,30)

14 dB 30 dB 30 dB

Gain Adjust Range Auto-Leveling Fixed Fixed Fixed

Maximum Input (32 Trns.) -21, -25, -29, -31, -35 dBm -28 dBm -31 dBm -27 dBm

Maximum Output (32 Trns.) -1, -5, -10, -20, -30 dBm -14 dBm -1 dBm +3 dBm

Slope 7 dB 4 dB 3 dB 5 dB

Flatness ± 0.2 dB ± 0.2 dB ± 0.2 dB ± 0.2 dB

Noise Figure 7 dB 7 dB 7 dB 7 dB

Input Return Loss 12 dB 15 dB 10 dB 12 dB

Output Return Loss 13 dB 13 dB 12 dB 14 dB

GENERAL

Power Requirements 14 - 20VDC 12 - 22VDC 15 - 24VDC 24VDC

Operating Temperature 0˚ to 50˚ Celsius -30˚ to 70˚ Celsius 0˚ to 50˚ Celsius 0˚ to 50˚ Celsius

Dimensions 5.5” x 4.5” x 1.5” 4” x 3” x .75” 5.5” x 4.5” x 1.5” 8.5” x 4.5” x 1.5”

Weight 1.8 lbs. .5 lbs. 1.9 lbs. 1.7 lbs.

SPECIFICATIONS

* Please see the satellite section (page 111) for dishes, stackers & satellite accessories.


COAXIAL CABLE & JUMPER ASSEMBLIES

COAXIAL DROP CABLEMODELS RG6-60-** : RG11-**


MODEL * *RG6-60-** B or W R, B or PR

RG6-60-*M B or W Messenger(Only Available on Reels)

RG6-Q-** B or W Reel Only

RG11-60-* B or W Reel Only

RG11-60-*M B or W Messenger(Only Available on Reels)

FREQUENCY RG-59 RG-6 RG-11 HVS-1

55 1.88 1.50 .95 2.4

550 5.9 4.76 3.01 8.5

870 7.54 6.09 3.9 10.62

1450 9.82 7.89 5.29 13.82

2150 12.1 9.69 6.6 16.74

Holland’s premium drop cable is made using the highest grade components such as copper-clad steel center

conductor (18 AWG), aluminum braid (min. 60%), gas injected foam dielectric and a UV inhibited PVC jacket. All drop cable

is swept tested to 2250 MHz.

COLORS: B = Black / W = White PACKAGING: R = Reel / B = Box / PR = Pull Reel-in-Box

2nd Asterisk = Packaging1st Asterisk = Color

MAXIMUM CABLE ATTENUATION (dB/100 FT @ 68˚F)

MADE IN USA

U.S. MANUFACTURED CABLE AVAILABLE UPON REQUEST.

MODEL RG6-60-PR* MODEL RG6-60-*R MODEL RG6-60-*B

* Optional UL Listed Models Available Upon Request



MINI PRECISION VIDEO COAXIAL CABLESMODELS 1855940 : 1855941 : 1855942 : 1855943 : HVS-1* : HVS-3 : HVS-5

YR940 SERIES FROM BELDEN REEL SIZE BUNDLE ** COLORS

1855940-* 250’ & 1000’ Reels Available Single Conductor BL, BK, BR, G, GR, O, R, V, W, Y

1855941 250’ & 1000’ Reels Available 3 Conductor R, G, BL

1855942 250’ & 1000’ Reels Available 5 Conductor R, GR, BL, Y, W

1855943 250’ & 1000’ Reels Available 10 Conductor All 10 Colors

HOLLAND VIDEO SELECT REEL SIZE BUNDLE COLORS

HVS-1* 250’ & 1000’ Reels Available Single Conductor R, G, BL, Y, W, BK

HVS-3-250 250’ Reels 3 Conductor R, G, BL

HVS-5-250 250’ Reels 5 Conductor R, G, BL, Y, W

HVS-6-250 250’ Reels 6 Conductor R, G, BL, Y, W, BK

MAXIMUM TRANSMISSION DISTANCE (FT)

Distance in Feet (Max.) 1000 910 750 650 530 210

Application CompositeNTSC

CompositePAL

ComponentVideo

ComponentWidescreen

ComponentWidescreen HDTV

Holland Electronics is proud to offer YR940 micro-coaxial cable. The

YR940 micro cable is a precision 75 Ohm video cable with a 23 AWG

solid copper center conductor, bonded foil, and a 95% tinned cop-

per braid (enabling its SDI rating) and comes in a variety of colors. It

is stocked individually as well as 2, 3, 5, 8, 10, 12 and 16-pack

bundles. Custom bundle cables are also available. The YR940 Series,

when matched with our 1855 connectors provide the perfect solution

for your A/V applications.

* = Available in 10 different colors.

** = Other bundles available. Please call for part number and pricing.

YR940 SERIES FROM BELDEN

MODEL 1855940*

MODEL 1855943

MODEL HVS-1* MODEL HVS-3 MODEL HVS-5

MODEL 1855942

HOLLAND PRECISION VIDEO CABLE

MADE IN USA

Holland’s precision mini-coaxial cable is the cost-effective micro cable solution. The HVS Series also uses a 23

AWG solid copper center conductor, bonded foil and 95% tinned copper braid. Overseas manufacturing allows us

to provide an excellent quality cable at an affordable price.

MODEL 1855941

* = Available in 6 different colors.

** = Other custom bundles available. Please call for details.

NOTE: See page 29 for mini connectors.


MOLDED PATCHCORDS & INTERCONNECTSMODELS JRR-3 : JRR-3D : JRR-3T : JRR-6 : JRR-6D : JRR-6T : JRR-12D : JRR-12T : J72-S : J72-RGB : J144-S


MODEL LENGTH NO. OF CABLES

JRR-3 3 Ft. Single

JRR-3D 3 Ft. Dual

JRR-3T* 3 Ft. Triple

JRR-6 6 Ft. Single

JRR-6D 6 Ft. Dual


MODEL LENGTH NO. OF CABLES

JRR-12D 12 Ft. Dual


J72-S (S-VIDEO)* 6 Ft. Single

J72-RGB* 6 Ft. Triple

J144-S (S-VIDEO)* 12 Ft. Single

* = Gold plated

MODEL JRR-33’ Single RCA Cable

MODEL JRR-3D3’ Dual RCA Cable

All Holland pre-molded jumper cables use the highest quality RCA, F, and S-Video connectors covered with a

flexible rubber strain relief boot.

MODEL JRR-3T3’ Triple RCA Cable



MODEL JRR-66’ Single RCA Cable



MODEL J72-RGB6’ Component RGB Video Cable

MODEL J72-S6’ Single S-Video Cable

MODEL J144-S12’ Single S-Video Cable

Standard patchcords are nickel plated, premium are available with gold plating. Triple Patchcords have two audio and one RG-59 video cable.



JUMPERS & ADAPTERSMODELS J36-BFF : J72-BFF : J36-6BFF : J72-6BFF : SV-RCA : RCA-Y : RCA-YF

COAXIAL JUMPERS

RCA & S-VIDEO ADAPTERS

MODEL RCA-YTwo female, one male

MODEL J36-BFF : J72-BFFPremium RG-59 jumper cables.

(36” & 72” Standard)

MODEL J36-6BFF : J72-6BFFPremium RG-6 jumper cables.

(36” & 72” Standard)

MODEL RCA-YFTwo male, one female

MODEL SV-RCA : S-VIDEO BREAKOUT ADAPTER

All Holland jumper cables are made to the highest CATV standards using Belden, Commscope, or Lunatron cable.

All are crimped with precision automatic equipment assuring the highest pull force available.

CUSTOM JUMPER ASSEMBLIES

Holland offers a variety of precision custom jumpers in all cable types. Many connector types and brands of cable

are available (ie. Male/ Female, F, RCA, BNC, SMB, etc.).

Save time, money, and extend S-Video transmission distance to 200’ while maintaining

picture quality with our S-Video adapters. This adapter converts the S-Video components to

two coaxial cables allowing you to run S-Video much further.

MODEL LENGTH COLOR CABLE CONNECTOR

J*-*-*-* In Inches Multiple Colors Available RG-59, RG-6,RG-11, 1855 F, RCA, BNC, SMB

EXAMPLE: J12-BK-59-F (12” Black RG-59 Jumper with F Connector)

CONNECTORS & ADAPTERS

SLCU SERIES COMPRESSION CONNECTORSMODELS SLCU-* : SLCU-*RCA : SLCU-*BNC

All Metal Construction

Dual O-Ring Moisture Sealing (F Type)

Dual Compression Points

Patented Viewing Window (#6,929,508)

Accommodates Color-Coded Application

Bands (SRR)

Interchangeable Internal Grip Ring

1 Piece Fixed Pin For BNC & RCA

FEATURES

The Superlok™ series compression connector utilizes two

independent compression points to seal and hold the

coaxial cable to the connector. Holland Electronic’s

patented viewing window allows users to determine when

complete cable insertion has been achieved prior to

compression.

Patent #6,217,383 / #7,008,263 / #6,929,508

SUPERLOK COMPRESSION CONNECTORS


SLCU-*F TYPE

SLCU-*BNCBNC TYPE

SLCU-*RCARCA TYPE

Dual O-Rings

Braid Foil

Jacket

2nd Compression Point

Grip RingPatent Pend.1st Compression Point

| 23

CUSTOMER NOTES:DD


SLCU SERIES COMPRESSION CONNECTORS


SLCU IDENTIFICATION

ELECTRICAL

Frequency DC - 3 GHz

Insertion Loss .1 dB

Return Loss 30 dB

MECHANICAL

Material Brass

Cable Strip Length 1/4” x 1/4”

CABLE TYPE MARKING (1) ID (2)

Standard 6 No Grooves Blue O-Ring

Tri-Shield 6 1 Groove Black O-Ring

Quad-Shield 6 2 Grooves Green O-Ring

Triple O-Ring 6 3 Grooves Blue O-Ring

Triple O-Ring Quad-Shield 6 3 Grooves Green O-Ring

CABLE TYPE MARKING (1) ID (2)

Standard 59 No Grooves Red O-Ring

Tri-Shield 59 1 Groove Yellow O-Ring

Quad-Shield 59, HEC2 2 Grooves Yellow O-Ring

Standard 11 No Grooves Black O-Ring

Quad-Shield 11 2 Grooves Green O-Ring

SLCU-HEC2 2 Grooves Yellow O-Ring

Marking grooves used to indicate cable braid configuration.

Easily identify application source with SRR Marking Bands.

Colored front O-Rings for visual verification of cable type.(Also provides improved moisture sealing)

Rear groove for SRR marking bands to indicate application.

1.

2.

3.

SPECIFICATIONS

SRR-* REPLACEABLE BANDS

* SEE SUPPORT SECTION OF OUR SITE (WWW.HOLLANDELECTRONICS.COM/SUPPORT) FOR CONNECTOR INSTALLATION INSTRUCTIONS.

1

3

2

BL = BLUE W = WHITE B = BLACK Y = YELLOW G = GREEN P = PURPLE R = RED

* = COLOR

24 |

EXAMPLE: Yellow=Video, Red=Audio, etc.


HOLLANDS SUPERLOK CONNECTORS PASS THE FOLLOWING SCTE SPECIFICATIONS

SCTE IPS-TP-401 Cable Retention Force > 40 lbs.SCTE IPS-TP-004 Insertion Force < 20 lbs.SCTE IPS-TP-013 Moisture Migration PassSCTE IPS-TP-110 Return Loss > 30 dB to 1 GHzSCTE IPS-TP-403 Shielding > 90 dB to 1 GHzSCTE IPS-TP-406 Salt Spray PassSCTE IPS-TP-400 Tightening Torque Pass


SLC-11 SERIES COMPRESSION CONNECTORMODELS SLC-11 : SLC-11Q

Dual Compression Points

Internal Center Conductor Guide

High Center Conductor Holding Force

Long Term Sealing

Low Cable Insertion Force

All Metal Construction

FEATURES

Holland Electronic’s SLC11’s advanced pin capture

mechanism makes it an ideal choice for professional RG-11

terminations. The SLC 11 features a sliding pin design that

avoids blind mating and ensures positive center conductor

insertion to provide the most reliable termination available.

Patent pending dual compression point technology guaran-

tees long term sealing and reduces the amount of insertion

force required. The improved sealing and all metal con-

struction ensure connector reliability even in the most

adverse environments.

SLC-11 SERIES FOR RG-11 CABLE

SLC-11 FEATURES:


CUSTOMER NOTES:DD

MODEL # DESCRIPTION PLATING TOOL CLOSURE SIZE

SLC-11 Standard Nickel 36.1 mm

SLC-11Q Quad Shield Nickel 36.1 mm

SLC-11/SLC-11Q* SEE NOTES BELOW

1

1

2

3

Dual compression points

Internal center conductor guide

Higher cable center conductor holding force

2

3


CONNECTOR SELECTION CHART


SERIES 6 CABLE

MODEL # DESCRIPTION PLATING CLOSURE SIZE

SLCU-59 F Male Nickel 21 mm

SLC59-HEC F Male / Tri-Shield Nickel 21 mm

SLCUHEC2 F Male / Head-End Nickel 21 mm

SLC59-RCA RCA Male / Fixed Pin / 1 Piece Nickel 29.8 mm

SLC59-RCAG RCA Male / Fixed Pin / 1 Piece Gold 29.8 mm

SLC59-BNC BNC Male / Fixed Pin / 1 Piece Nickel 29.8 mm

SLC59-BNCG BNC Male / Fixed Pin / 1 Piece Gold 29.8 mm


SLCU-6 F Male Nickel 21 mm

SLCU-6T F Male / Tri-Shield Nickel 21 mm

SLCU-6Q F Male / Quad-Shield Nickel 21 mm

SLCU-6-O F Male w /Triple O-Ring Nickel 21 mm

SLC-6M F Male / Short Nickel 20.1 mm

SLCU-6QO F Male / Quad-Shield w/Triple O-Ring Nickel 21 mm

SLC6-RCA RCA Male / Fixed Pin / 1 Piece Nickel 29.8 mm

SLC6-RCAG RCA Male / Fixed Pin / 1 Piece Gold 29.8 mm

SLC6Q-RCA RCA Male / Fixed Pin / Quad-Shield / 1 Piece Nickel 29.8 mm

SLC6Q-RCAG RCA Male / Fixed Pin / Quad-Shield / 1 Piece Gold 29.8 mm

SLC6-BNC BNC Male / Fixed Pin / 1 Piece Nickel 29.8 mm

SLC6-BNCG BNC Male / Fixed Pin / 1 Piece Gold 29.8 mm

SLC6Q-BNC BNC Male / Fixed Pin / Quad-Shield / 1 Piece Nickel 29.8 mm

SLC6Q-BNCG BNC Male / Fixed Pin / Quad-Shield / 1 Piece Gold 29.8 mm

SERIES 59 CABLE

26 |

* SEE SUPPORT SECTION OF OUR SITE (WWW.HOLLANDELECTRONICS.COM/SUPPORT) FOR CONNECTOR INSTALLATION INSTRUCTIONS.

* Series 6 photos shown with optional SRR bands.


FOR SERIES RG-59 CABLE : SERIES RG6 CABLE : SERIES 11 CABLE : SERIES 7 CABLE


SERIES 59 CABLE

MODEL # DESCRIPTION PLATING CRIMP TOOL HEX SIZE

F59-290G F Male / Brass Gold Iridite .324

F59-290T F Male / Brass Tin .324

F59-290D F Male / Zinc Nut Nickel .324

F9-290 F Male / Economy Nickel .324

F59-290CC F Male / Brass / Conical Crimp Tin .324

RCA59-290 RCA Male / Fixed Pin / 1 Piece Nickel .324

RCA59-290G RCA Male / Fixed Pin / 1 Piece Gold .324

BNC-C290 BNC Male / Fixed Pin / 1 Piece Nickel .324

F59-UNIV F Male / Brass / Universal Gold Iridite .360

SERIES 6 CABLE

All Holland brand premium F connectors have been made to precise specifications and standards for over 20 years in

our ISO 9001:2000 factory. We continue to use high grade brass for our connectors and have made significant improve-

ments in our annealing process that guarantees quality and performance.

ATTACHED RING CRIMP CONNECTORS


F56-324G F Male / Brass Gold Iridite .324


F56-324D F Male / Zinc Nut Nickel .324

F56-324 F Male / Zinc Nut Gold Iridite .324

F6-324 F Male / Economy Nickel .324

F56-324CC F Male / Brass / Conical Crimp Tin Uses RTC-360 or Similar

F56-324CCWP F Male / Brass / Conical Crimp with O-Ring Tin Uses RTC-360 or Similar

F56-324K F Male / Brass / Knurled Tin .324

F56-342G F Male / Brass / Tri Shield Gold Iridite .324

F56-342T F Male / Brass / Tri Shield Tin .324

F56-357G F Male / Brass / Quad Shield Gold Iridite .360

F56-357T F Male / Brass / Quad Shield Tin .360

F56-UNIV F Male / Brass / Universal Gold Iridite .360

F-5681G F Female / 1 Piece / High Return Loss Gold Iridite .324

BNC-C324 BNC Male / Fixed Pin / 1 Piece Nickel .324


ATTACHED RING CRIMP CONNECTORS


SERIES 11 CABLE


F11-460 F Male / Fixed Pin Tin .472

F11-480 F Male / Fixed Pin / Quad Shield Tin .472

F11-460WOL F Male / Fixed Pin with O-Ring and Gel Tin .472

SERIES 7 CABLE



SERIES 59 & 6 WEATHERPROOF


F59-290WOL F Male / Brass / O-Ring and Gel Gold Iridite .324

F6-324WL F Male / Economy / Large Nut / O-Ring and Gel Gold Iridite .324

F56-324W F Male / Brass/ Zinc Nut / O-Ring and Gel Gold Iridite .324

F56-324WOL F Male / Brass/ 4 Turn Nut / O-Ring and Gel Gold Iridite .324

F56-324WL F Male / Brass/ Large Nut / O-Ring and Gel Gold Iridite .324

F56-324GWP F Male / Brass/ 4 Turn Nut / O-Ring Gold Iridite .324

F56-UNIV-WL F Male / Brass / Universal / Large NutO-Ring and Gel Gold Iridite .360


MINI COAX SERIES CONNECTORSFOR SERIES 23AWG CABLE : SERIES 25AWG CABLE : SERIES 30AWG CABLE


Holland offers the most complete line of connectors for mini coax available in the industry. Take advantage of our

one piece designs that enable you to terminate your cables in 15 seconds. Our connectors are available for the most

popular mini cable sizes ranging from 23-30AWG center conductors. Designed for all applications in CATV, satellite,

home theater, broadcast and satellite radio. Holland’s patented U (Universal) Models (#7,112,093) can be used on a wider

range of cable sizes.

CRIMP - 23 AWG

COMPRESSION - 23 AWG 25 AWG 30 AWG

RIGHT ANGLE COMPRESSION FEMALE BULKHEADS SATELLITE RADIO

F1855-FP BNC1855-FP RCA-1855

SLC1855-90-F

SLC1855-90-BNC

SLC1855-90-RCA

GF-1855-A

BNCFPFBH

RCAFPFBH

SMBFP

SMBFP90

SMBFPF

MODEL # DESCRIPTION

1855940-STARTER Kit with Tools, 250’ Cable, and Crimp Connectors

1855940STARTERC Kit with Tools, 250’ Cable, and Compression Connectors

INSTALLER PACK Installation Bag Only. No Tools, Cable, or Connectors

Our installer kits are designed to keep your installation materials organized. Features

six internal pockets to keep connector styles separate, external tool pockets, a

retractable handle, wheels, and a 250’ internal cable spooler.

SLC1855-FP2SLC1855-FPUSLC-MINI25USLC-179DT-FP (2 PIECE)

SLC1855-BNCFPSLC1855-BNCFPUSLC-BNC-MINI25USLC-BNC-179DT (2 PIECE)

SLC1855-RCAFPSLC1855-RCAFPUSLC-RCA-MINI25USLC-RCA-179DT (2 PIECE)

INSTALLERS KIT


MINI COAX SERIES CONNECTORS


For Holland HVS Series : Belden YR46940, 1855A : Commscope 7538 or Similar

For Holland HVS Series : Belden YR46940, 1855A : Commscope 7538 or Similar

For Belden 1279R, 1279P, HC2950 or Similar

For Belden 179DT or Similar

NOTE: Ask your sales representative for the right connectors if your cable is not listed here.

SERIES 25AWG CABLE

SERIES 23AWG CABLE

COMPRESSION CONNECTORS

(Nominal Cable OD .159”)

SERIES 23AWG CABLE


SLC1855-FP2 F Male / Fixed Pin / 1 Piece Nickel 29.8 mm

SLC1855-FPU F Male / Fixed Pin / 1 Piece / Universal Nickel 29.8 mm

SLC1855-RCAFP RCA Male / Fixed Pin / 1 Piece Nickel 29.8 mm

SLC1855-RCAFPG RCA Male / Fixed Pin / 1 Piece Gold 29.8 mm

SLC1855-RCAFPU RCA Male / Fixed Pin / 1 Piece / Universal Nickel 29.8 mm

SLC1855-BNCFP BNC Male / Fixed Pin / 1 Piece Nickel 29.8 mm

SLC1855-BNCFPU BNC Male / Fixed Pin / 1 Piece / Universal Nickel 29.8 mm

SLC1855-90-F 90° F Male/ Fixed Pin / 1 Piece Nickel 29.8 mm

SLC1855-90-RCA 90° RCA Male / Fixed Pin / 1 Piece Nickel 29.8 mm

SLC1855-90-BNC 90° BNC Male / Fixed Pin / 1 Piece Nickel 29.8 mm

SERIES 30 AWG CABLE


SLC-179DT-FP F Male / Fixed Pin / 2 Piece Nickel 29.8 mm

SLC-RCA-179DT RCA Male / Fixed Pin / 2 Piece Nickel 29.8 mm

SLC-BNC-179DT BNC Male / Fixed Pin / 2 Piece Nickel 29.8 mm


SLC-MINI25-U F Male / Fixed Pin / 1 Piece Nickel 29.8 mm

SLC-RCA-MINI25U RCA Male / Fixed Pin / 1 Piece Nickel 29.8 mm

SLC-BNC-MINI25U BNC Male / Fixed Pin / 1 Piece Nickel 29.8 mm

MODEL # DESCRIPTION PLATING HEX SIZE

F1855-FP F Male / Fixed Pin / 1 Piece Nickel .270 mm

RCA-1855 RCA Male / Fixed Pin / 1 Piece Nickel .270 mm

BNC1855-FP BNC Male / Fixed Pin / 1 Piece Nickel .270 mm

GF-1855-A F Female / Fixed Pin / 1 Piece Nickel .270 mm

RCAFPFBH RCA Female / Fixed Pin / 1 Piece Nickel .270 mm

BNCFPFBH BNC Female / Fixed Pin / 1 Piece Nickel .270 mm

SMBFP SMB Plug / 1 Piece Nickel .213 mm

SMBFP90 90° SMB Plug / 1 Piece Nickel .213 mm

SMBFPF SMB Jack / 1 Piece Nickel .213 mm




CRIMP CONNECTORS




ADAPTERS & TERMINATORS


F-71F MALE - F MALE

F-59T F-59TH

BFABNC MALE - F FEMALE

SV-RCAS VIDEO - RCA FEMALES

FF-RF FEMALE - RCA MALE

RCA-FRCA FEMALE - F MALE

PF-59F FEMALE - F MALE PUSH ON

G-PF-59

PRECISION PUSH-ON F CONNECTOR

MODEL #INSERTION LOSS RETURN LOSS

1GHz 2GHz 3GHz 1GHz 2GHz 3GHz

F-90 .3 dB .5 dB 1 dB 18 dB 13 dB 8 dB

F-90HR .3 dB .4 dB .5 dB 35 dB 26 dB 18 dB

VBC* .3 dB .5 dB 1.2 dB 20 dB 13 dB 9 dB

VBC-HR* .2 dB .3 dB .5 dB 40 dB 27 dB 15 dB

MODEL #RETURN LOSS

BODY MATERIAL1GHz 2GHz 3GHz

F-59T 15 dB 10 dB 8 dB Brass

F-59TH 40 dB 30 dB 22 dB Zinc

VBCVOLTAGE BLOCK

VBC-HRVOLTAGE BLOCK, HRL

Our F Series Terminators are used to provide a 75 Ohm termination on F type connections. Our F-59TH uses precise

machining and component matching to achieve high return loss.

* Max. Voltage 35VDC

F SERIES TERMINATORS

Holland’s patented high return loss push-on F connector is ideal for industrial high-use environments where

reliability over repeated insertions is critical.

The Holland series of adapters have been developed to meet high performance requirements. We have added the

HR Series to our standard line of selected adapters to meet higher standards and improve performance of CATV and

satellite systems operating to 2 and 3 GHz. The HR Series use our patented (#5,667,409) round seizing mechanism.

Self-Aligning Body

High Return Loss

Conical F Female Seizing Pin (Patent 5,667,409)

High Insertion Life: Over 3,000

HIGH PERFORMANCE ADAPTERS

F-90RIGHT ANGLE F

F-90HRRIGHT ANGLE F, HRL




ATTENUATORS/CATV SECURITY PRODUCTS

FAM-*F TYPE ATTENUATOR

FAMP-*HRF TYPE ATTENUATOR

DC POWER PASSING (HRL)

PPLT-75 PPLT-LR( Less Resistor )

PPLT-T

GLT GLT-LR( Less Resistor )

GLT-T

SSHEAVY DUTY ZINC BODY

ST-1TOOL FOR SS SLEEVES

SS-NSNYLON BODY

SSSTHREADED FRONT

SPECIFICATIONS FAM-* FAM-*HR FAMP-* FAMP-*HR

Frequency Range 5 MHz - 3 GHz 5 MHz - 3 GHz DC - 3 GHz DC - 3 GHz

Attenuator Values 3, 6, 8, 10, 12, 16, 20 (dB) 3, 6, 8, 10, 12, 16, 20 (dB) 3, 6, 10, 12, 20 (dB) 3, 6, 10 (dB)

Accuracy ± .5 ± .5 ± 1 ± .5

Flatness .8 .5 1.5 .8

Return Loss (1 GHz / 2 GHz / 3 GHz) 22 / 18 / 15 (dB) 27 / 23 / 20 (dB) 18 / 14 / 8 (dB) 26 / 25 / 20 (dB)

Max. Voltage / Max. Current - - 35VDC / 750mA 35VDC / 750mA

PPLT SERIES LOCKING TERMINATORS

This locking terminator has been specially designed to overcome problems of theft and tool breakage.

SECURITY SLEEVES

GLT SERIES LOCKING TERMINATORS

ATTENUATORS

Aluminum Body

Compatible with GTP-59 type tools

Widely Used for Over 25 Years

Heavy Duty Zinc Body

High Theft Resistance

Patented Locking Mechanism (# 5,106,312)

Unique Tool Design

FAM-*HRF TYPE ATTENUATOR

HIGH PERFORMANCE (HRL)

FAMP-*F TYPE ATTENUATORDC POWER PASSING



F SPLICESMODELS F-811 : F-81 : G-F811 : G-F81F : G-F81F* : G-F81XL

Heavy Duty Zinc Body (F-811)

Machine Thread (F-81)

3 GHz Operation

Lower Insertion Loss

High Return Loss (> 35 dB)

Flat Port Ends (IPS SP 400)

High Holding Force: > 200 grams

Beryllium Copper Seizing Pin

Greater Contact Area

G SERIES FEATURES

Holland Electronics has advanced the traditional F splice

technology with a patented design offering a higher level of

electrical and mechanical features. The advanced features

provide increased return loss beyond 3 GHz, twice the pin

contact area and increased holding force for higher

current handling and greater reliability.

HIGH PERFORMANCE F SPLICE PRODUCTS


CUSTOMER NOTES:DD

G-F81F* G-F81XL F-811 F-81

STANDARDG SERIES HIGH PERFORMANCE

G-F811 G-F81F

STANDARD SERIES

* PASSES ALL SCTE REQUIREMENTS. PLEASE SEE BACK FOR

ADDITIONAL TEST SPECIFICATIONS.

Patents #5,863,226 / #5,498,175 / #5,667,409 / #6,113,431 / #6,276,970

STANDARD SERIES FEATURES


F SPLICES


F SPLICE SPECIFICATIONS

34 |

MODEL F-811 F-81 G-F811 G-F81F G-F81F* G-F81XL

Frequency Range DC - 3 GHz DC - 3 GHz DC - 3 GHz DC - 3 GHz DC - 3 GHz DC - 3 GHz

Insertion Loss.3 dB (1 GHz).6 dB (2 GHz)2.0 dB (3 GHz)

.3 dB (1 GHz)

.6 dB (2 GHz)2.0 dB (3 GHz)

< .1 dB (1 GHz)< .2 dB (2 GHz)< .3 dB (3 GHz)




Return Loss> 12 dB (1 GHz)> 9 dB (2 GHz)> 6 dB (3 GHz)

> 12 dB (1 GHz)> 9 dB (2 GHz)> 6 dB (3 GHz)





Pin Holding Force > 50g (Initial) > 50g (Initial)> 200g (Initial)

> 120g(After 50 Inserts)

> 200g (Initial)> 120g

(After 50 Inserts)


(After 50 Inserts)


(After 50 Inserts)

MECHANICAL

Total Length (mm) 21.2 21.2 26.3 27 27 34.05

Long End/Short End (mm) 11.6 / 8.1 11.2 / 8 11.6 / 10.3 12.6 / 10.1 15.4 / 8.6 15 / 15

Nut Size (mm) 11 Hex (7/16”) 11 Hex (7/16”) 11 Hex (7/16”) 11 Hex (7/16”) 11 Hex (7/16”) 11 Hex (7/16”)

Body Material Zinc Zinc Zinc Brass Brass Brass

Threads Die Cast Machined Machined Machined Machined Machined

Contact Pin Phos. Bronze Phos. Bronze BeCu BeCu BeCu BeCu

Insulator PE PE HDPE HDPE HDPE HDPE

MODEL GRB-1 GRB-2 G-G2B2 GL-G2B2 GRB-2DHR GRB-2THRUL GRB-S GRB-SL

Frequency Range DC -1 GHz DC -1 GHz DC - 3 GHz DC - 3 GHz DC - 3 GHz DC - 3 GHz DC - 3 GHz DC - 3 GHz

Insertion Loss .3 .3< .1 dB (1 GHz)< .2 dB (2 GHz)< .3 dB (3 GHz)






Return Loss (1 GHz/2 GHz /3 GHz) 10 10 35 / 30 / 26 35 / 30 / 26 35 / 25 / 20 35 / 25 / 20 35 / 30 / 26 35 / 30 / 26

Pin Holding Force (Initial) 50g 50g 200g 200g 200g 200g 200g 200g

MECHANICAL

Splice Length (mm) 25.4 25.4 25.7 34.6 25.8 25.6 27 34.6

Body Material Zinc Zinc Zinc / Brass Zinc / Brass Zinc Zinc SS / Brass SS / Brass

Groundscrews / Material 1 / Steel 1 / Steel 1 / Steel 1 / Steel 2 / Stainless 3 / Stainless 1 / Stainless 1 / Stainless

Groundwire Range (AWG) 12 - 16 12 - 16 10 - 14 10 - 14 10 - 14 8 - 14 10 - 14 10 - 14

Contact Pin Phos.Bronze

Phos.Bronze BeCu BeCu BeCu BeCu BeCu BeCu

Insulator PVC PVC HDPE HDPE HDPE HDPE HDPE HDPE

GROUND BLOCK SPECIFICATIONS ( PLEASE SEE GROUND BLOCKS ON PAGE 35 )

MEETS APPLICABLE SCTE SPECIFICATIONS ( G-SERIES ).

MEETS APPLICABLE SCTE SPECIFICATIONS ( EXCLUDING GRB-1, GRB-2 ).



GROUNDING HARDWAREGROUND BLOCKS

High Electrical Performance for Satellite

Frequency

Single, Dual & Extended Lengths

Patented Splice Design

UL Listed Models Available

Machined Threads

High Return Loss (>35 dB)

Lower Insertion Loss

Flat Port Ends

FEATURES

Holland’s high performance ground blocks utilize a zinc base

and brass splice to achieve 3/8-2A-UNEF thread quality.

Standard and extended length models available.

HIGH PERFORMANCE SINGLE GROUND BLOCKSG-G2B2 : GL-G2B2

Holland’s high performance ground blocks feature a zinc body

with machined threads and multiple ground screw

configurations. These grounding blocks are nickel plated and

utilize stainless steel ground screws for maximum outdoor

survivability.

HIGH PERFORMANCE DUAL GROUND BLOCKSGRB-2DHR : GRB-2THRUL

Holland’s stainless steel series ground blocks offer the

advantage of a stainless body for strength and anti-corrosive

characteristics and a brass splice to achieve 3/8-2A-UNEF.

These ground blocks accept a wide range of ground wire sizes.

STAINLESS STEEL GROUND BLOCKSGRB-S : GRB-SL


CUSTOMER NOTES:DD

GL-G2B2

GRB-2DHR GRB-1 GRB-2

G-G2B2

GRB-2THR-UL

GRB-S GRB-SL

UL®UL®

UL®UL®

UL®UL®

* SEE PAGE 34 FOR PRODUCT SPECIFICATIONS.

Holland’s standard series zinc ground blocks are available in

single or dual splice models.

STANDARD GROUND BLOCKSGRB-1 : GRB-2

Patents #5,863,226/#5,498,175/#5,667,409/#6,113,431/#6,276,970



GROUNDING HARDWAREHARDWARE : GROUNDSTRAPS : GROUNDING RODS

MODEL DESCRIPTION INTENDED USE MATERIAL

SB-4,6,8 Split Bolt Copper to Copper Bonding Copper Plated Brass

CWPC-1B Water Pipe Clamp Bonds Ground Wire to Water Pipes or Steel Conduit Steel / Zinc Plated

MBC Meter Box Clamp Bonding Protection for Meter Pan and Ground Wire Stainless Steel

A-5/8 Brass Ground Clamp Secures Ground Wire To Ground Copper Plated Brass

GROUND STRAPS

Comes in 6”, 9”, 12” and 24” lengths, copper or galvanized steel available.

GROUNDING ROD

Universal 4’ ground rod, clamp included.

SB-4, 6, 8

MODEL A-24-6, 9, 12 MODEL A-24-6G, 9G, 12G

MODEL A-21-4

CWPC-1B A-5/8MBC

MODEL LENGTH PIPE SIZE WIRE SIZE MATERIAL

A-24-6 6” 5/8”-1 3/4” 10-18 AWG Copper

A-24-9 9” - 10-18 AWG Copper

A-24-12 12” - 10-18 AWG Copper

A-24-6G 6” - 10-18 AWG Galvanized Steel





OEM RF CONNECTORS

| 37

Holland Electronics is a major manufacturer of OEM connectors for all RF applications including Wireless,

Microwave, Satellite, HDTV and CATV.

Custom USA Design Services

Fast, Low-Cost Prototyping

Low-Cost Asian Volume Pricing

Precision Mechanical Parts: Brass and Stainless, Zinc Die-Cast, Stampings

Wide Frequency Range designs from DC to 6 GHz

Precision Electrical Designs for 50 and 75 ohm

Wide Variety of Shape Formats: PCB, Bulkhead, Chassis Mount, Cable (SMB, SMA, F, MCX, MMCX, G, N, ETC)

RoHs Compliance / ISO-9001:2000

Specializing in Moisture-Proof High Performance Designs

Gold

Silver

Tin

Nickel

Ni-Tin

Chromate

CNC/Screw

Diecast

Extrusion

Injection

Stamping

Powder

Compression

Annealing

Electrical (20 GHz)

Temperature

Moisture

Hi-Pot

Plating X-ray

Hardness

Shock/Vibration

MIL-STD

SCTE

ANSII

MATERIALSBrass

Stainless

Beryllium

Copper

Zinc

Teflon

Silicone

Rubber

PLATINGS PROCESSES TESTING APPROVAL CAPABILITIES

Our OEM connectors may be supplied with our patented high performance conical female seizing

pin and/or moisture proof designs.

HIGH-FREQUENCY F SPECIALIZATION

WE OFFER:


OEM RF CONNECTORS


HIGH-FREQUENCY SPECIALIZED PRODUCTS

Available in PCB, Chassis, Bulkhead, Cable Mount and other formats. Below items are for reference

purposes only. All types, sizes and models made to the OEM’s specifications.

G-F61-PCB90XTL G-F610H GF61H G-F61-PCBV

GF-GSM G-PCBV-BH G-PCBV G-PCB90

BNC-PCBV-FL BNCFPFBH BNC-PCBE-CL BNC-PCBE-BH

SMB-75FPF SMB90-179 SMA-SS FAKRA STYLE

MCC-PCB90-F2 MC-PCBV TNC-PCB90 TNC-L600R

MCX1855-FP MCX-PCBE MCX-1672-RA MMCX-RA-174

N-PCB90 BLINDMATE SMB’S GSK-F G-F81GF

IEC-F-90-PCB 7807-CT 1.0/2.3 PLUG 1.0/2.3 JACK

F

G

BNC

MISC.

SMA/SMB

MICROWAVE

SPECIALTY

MCX

FIBER OPTIC

CATV OPTICAL TRANSMITTERSMODELS NE1000LN-* : NE5000L : NE7000

45 - 870 MHz Operation

Power Ranges from 4-20mW

Automatic Gain Control Using Pilot

Carriers

Highly Stable Output

Network Management Capability

RS485 Control Interface

LCD Display

Patented Pre-distortion Circuitry,

Low-Distortion Performance, High CNR

FEATURES

Holland’s optical transmitters offer great flexibility to meet

the demands of today's CATV requirements. The NE1000

Series transmitters are ideal for offering a combination of

analog and digital content. These transmitters utilize a

directly-modulated 1310nm DFB laser diode and superior

circuit design supporting automatic temperature and

power control.

Features include gain control (both AGC or MGC) for RF

input level, and excellent linearity due to patented pre-dis-

tortion technology.

The NE1000 Series transmitters are an ideal solution for

today's medium sized CATV system offering a wide array of

services.

CATV OPTICAL TRANSMITTERS


UL®

| 39

CUSTOMER NOTES:

MODEL NE1000LN-*

DD

FIBER OPTIC

CATV OPTICAL TRANSMITTERS


OPTICAL NE1000LN-* NE5000L

Wavelength 1310 ± 20 nm 1550 ± 10 nm

Output Power (mW)Output Power (dBm)

4, 6, 8, 10, 13, 16, 20 mW4, 8, 9, 10, 11, 12, 13 dBm

>5 mW>7 dBm

Laser RIN Noise Density – <-160 dB/Hz

SBS Suspension Threshold – 13, 16 & 18 dBm

Return Loss >60 dB >60 dB

Output Ports 1 2

Connectors FC/APC, SC/APC, E2000/APC FC/APC, SC/APC, E2000/APC

LINK PERFORMANCE

Composite Second Order (CSO) <-64 dBc <-65 dBc @ Port 1<-63 dBc @ Port 2

Composite Triple Beat (CTB) <-68 dBc <-65 dBc

Cross Modulation < -65 dBc NA

RF PARAMETERS

Frequency Range 45 - 870 MHz 45 - 870 MHz

Input Range 15 - 25 dBmV 15 - 25 dBmV

Input Level Narrow Port – 45 dBmV

Gain Control Range 10 dB 10 dB

Flatness ± .75 dB ± .75 dB

Return Loss >16 dB >16 dB

GENERAL

Power Supply 90 to 260VAC., 50/60 Hz, 15 W (Max.) 90 to 260VAC., 50/60 Hz, 15 W (Max.)

Operating Temperature 0˚ to 50˚ Celsius 0˚ to 50˚ Celsius

Dimensions 350D x 485W x 45H (mm) 350D x 485W x 45H (mm)

Weight 4.6 kg 4.6 kg

SPECIFICATIONS

NE7000

Frequency Range 54 - 2050 MHz

Flatness ±1.5 dB

Return Loss >12 dB

Frequency (Optical) 1310 nm ± 20 nm

Fiber Type Single Mode

Connectors FC/APC, SC/APC

Link Loss (950-2050) 13 dB (45 dB C/N)

RF Input -40 dBm (Min. for Full Output)

Power Supply 9 - 36 VDC@250 mA

* = The NE7000 can also be used for up to 4 channel CATV applications. Please call for details.

SATELLITE OPTICAL TRANSMITTER


FIBER OPTIC

CATV OPTICAL RECEIVERSMODELS NE1100L : NE1101 : NE7100

870 MHz Bandwidth

Optional Return Path Transmitters(NE1100L)

Rack or Strand Mount

Automatic Gain Control Using Pilot

Carriers

FEATURES

The NE1100L optical node is the perfect solution for

operators implementing fiber in their system. By using

AGC/MGC, the NE1100L provides a stable RF output with a

varying optical input. Features an optional return path

transmitter and remote monitor module, along with

hermetically-sealed housing and ports for excellent

reliability in any environment.

NE1100LCATV OPTICAL NODE

The NE1101L utilizes the same tried and true technology as

the NE1100L in an indoor rack-mount design with many

additional features. Features include LCD display, status

monitoring, and front panel controls making it simple to

operate.

NE1101LRACK MOUNT CATV OPTICAL RECEIVER


UL®

| 41

CUSTOMER NOTES:

MODEL NE1100L MODEL NE1101L

DD

FIBER OPTIC

CATV OPTICAL RECEIVERS


OPTICAL NE1100L NE1101L NE7100

Wavelength 1260 - 1600 nm 1260 - 1600 nm 1200 - 1600 nm

Input Power -6 to 3 dBm -6 to 3 dBm > -13 dBm

Detector InGaAs PIN InGaAs PIN InGaAs PIN

Connectors FC/APC or SC/APC FC/APC or SC/APC FC/APC or SC/APC

Return Loss >60 dB >60 dB > 55 dB

RF PARAMETERS

Frequency Range 45 - 870 MHz 45 - 870 MHz 200 - 2050 MHz

Output Level 36 dBmV (-3 dBm Input) 36 dBmV (-3 dBm Input) 37 dBmV

Flatness ± 1 dB ± 1 dB -

Gain Control AGC Module / Plug-In Pads AGC / MGC -

Return Loss >16 dB >16 dB 12 dB

NETWORK MANAGEMENT

NMS Data Rate 19.2 Kbps 19.2 Kbps -

Pilot Carrier 10.7 MHz 10.7 MHz -

Monitor Connector 15 pin D sub 15 pin D sub -

SPECIFICATIONS

OPTIONS

NE1100L

01 Plug In Attenuators (0-13 dB)

02 AGC Module

03 Plug In Equalizer

04 Diplex Filter

05 Directional Coupler / Splitter

06 Return Path Transmitter

NE1101L

01 Diplex Filter

02 Network Management


FIBER OPTIC

CATV OPTICAL AMPLIFIERSMODEL NE6000L

Output Power Range from 14-24 dBm

High Reliability 980/1480 nm Pump

Laser Diode

Wide Operating Range with High Gain

and Low Noise Figure

Network Management Capability

RS485 Control Interface

FEATURES

The NE6000L-* is a high performance optical amplifier

designed for 1550 nm based network applications. This 19”

rack mount module is ideal for long haul applications, fiber

dense systems, and transport architectures such as

broadcast layer transmission and redundant rings.

Features high power output ranging from 14 to 24 dBm.

CATV OPTICAL AMPLIFIER


UL®

| 43

CUSTOMER NOTES:DD

MODEL NE6000L-*

FIBER OPTIC

CATV OPTICAL AMPLIFIERS


OPTICAL NE6000L-*

Wavelength 1540 - 1560 nm

Noise Figure <5.0 dB for output power <20 dBm<5.5 dB for output power >20 dBm

Optical Input Power Range -5 to 10 dBm

Output Power (*) 14 - 24 dBm (must specify power, 1 dB increments)

Polarization Sensitivity < .5 dB

Output Power Variation ± .5 dB

Optical Connector SC/APC

Minimum Optical Input Power for Rated Output Power 0 dBm (when output <=20 dBm)4 dBm (when output <=24 dBm)

PHYSICAL

Control Interface RS 485

Power Supply 90 - 260VAC, 50/60 Hz, 50 W (Max.)

Operating Temperature 0˚ to 50˚ Celsius

Relative Humidity 85% Max.

SPECIFICATIONS


FIBER OPTIC

FIBER OPTIC DISTRIBUTION SYSTEMMODELS FOD-PF : FOD-AC : FOD-1310TX-* : FOD-FRX : FOD-RPR : FOD-RPT


The FOD Modular Fiber Optic Distribution System consists of a 10-slot mounting rack for holding our modular

fiber-optic power supplies, transmitters, amplifiers and receivers. The 8 3/4” rack height covers 5 EIA rack

spacings, making the 10 module system space efficient. The FOD System has an LCD display for status monitoring, and

modules can be changed in/out without power shutdown to the distribution system.

PARAMETERS MODEL FOD-AC

Input Voltage Range 90 - 260VAC

Output Voltage Range 24 -26VDC

Output Current .1 - 8 A

Power Consumption < 240 W

PHYSICAL


Operating Humidity 85% Max.

OPTICAL MODEL FOD-1310TX-*

Wavelength 1310 ± 20 nm

Output Power* 4, 6, 8, 10, 13, 16, 20 mW

Laser Type Cooled DFB LD w/ isolator

Connector SC/APC

Laser RIN Noise Density < -155 dB/Hz

Composite Second Order (CSO) < -64 dBc

Composite Triple Beat (CTB) < -68 dBc

Cross Modulation (XMOD) < -65 dBc

RF PARAMETERS

Operating Bandwidth 45 - 870 MHz

Analog Channel Loading 45 - 550 MHz

Digital Channel Loading 550 - 870 MHz

RF Input Return Loss < -16 dB

RF Input Level (Analog) 15 - 25 dBmV (w/ AGC)

PHYSICAL



UNIVERSAL CHASSIS PLATFORM

FOD MODULAR FIBER OPTIC DISTRIBUTION SYSTEM

AC POWER SUPPLY

DOWNSTREAM TRANSMITTER

10 Plug-in Slot Capacity

RS-232/RS-485 Interface

LCD Display for On-Site Status Monitoring

Only Requires 5-RUMODEL FOD-PF

MODEL FOD-AC

MODEL FOD-1310TX-*


FIBER OPTIC


FIBER OPTIC DISTRIBUTION SYSTEMMODELS FOD-FRX : FOD-RPR : FOD-RPT

MODEL FOD-FRX

MODEL FOD-RPR MODEL FOD-RPT(For Use in NE-1100L)

OPTICAL FOD-RPR

Photodiode Type InGaAs PIN

Wavelength 1310 ± 20 nm; 1550 ± 20 nm

Connector SC/APC

Power Input Range -10 to 3 dBm

RF PARAMETERS


RF Output Level (Analog)> 46 dBmV/Ch. @

-10 dBm Optical Input

Gain Control Range 25 dB

RF Output Return Loss < -16 dB

Flatness ± .75 dB

PHYSICAL



FORWARD PATH OPTICAL RECEIVER

DUAL RETURN PATH RECEIVER

CATV RETURN PATH TRANSMITTER

OPTICAL FOD-RPT

Laser TypeIsolated, Uncooled, FP Laser (FP-B)

Nonisolated, Uncooled FP or DFB Laser(FP-A/DFB-A)

Wavelength 1310 ± 20 nm

Connector SC/APC

Output Power > 0 dBm (FP-A, DFB-A); > -3 dBm (FP-B)

RF PARAMETERS



RF Input Level (1 Video) < 15 dBmV

Data Input Level (When NPR > 40 dB) 8 - 18 dBmV

PHYSICAL



OPTICAL FOD-FRX

Photodiode Type InGaAs PIN

Wavelength 1310 ± 20 nm; 1550 ± 20 nm

Connector SC/APC

Power Input Range -10 to 3 dBm

RF PARAMETERS


RF Output Level (Analog) 36 dBmV/Ch. @ -3 dBm Optical Input

Gain Control Range 10 dB

Slope Adjustment -1 to 2 dB


Flatness ± 1 dB

Pilot Tone for AGC 10.7 MHz ± -50 kHz

PHYSICAL




FIBER OPTIC


ORDERING WINDOW CONNECTOR PERFORMANCE ATTENUATION

AT S = SingleD= Dual

SCFC

U = UPCA = APC

1 - 20 dB(1 dB Increments)

Example = AT D – FC – A – 3

ORDERING LENGTH FIBER CONNECTOR PERFORMANCE CONNECTOR PERFORMANCE

J Meters S = SingleM= Multi

FCSC

U = UPCA = APC

FCSC

U = UPCA = APC

Example = J 1 – S – FC – U – FC – A

ORDERING # SPLITS MODE RATIO PERFORMANCE

OCP 12 = 1x213 = 1x3

S = SingleM= Multi

50 = 50/50XX = XX/100-XX

H = High (3.7dB, 50/50)S = Super (3.6dB, 50/50)

Example = OCP- 12 – S – 50 – S

SPECIFICATIONS ATTENUATORS

Wavelength 1310, 1550 nm (±2 nm)

Accuracy ±.75 dB (1-3 dB values), ±1.5 dB (4-20 dB values)

Housings Brass, Zinc

Return Loss >50 dB Standard, >65 dB APC

Operating Temperature -40˚ to +75˚ Celsius

SPECIFICATIONS PATCHCORDS

Wavelength 1310, 1550 nm (±40 nm)

Directivity > 50 dB

Polarization Dependence < .1 dB

Coupling Ratio 50/50, 45/55, 35/65, 25/75, 15/85

Operating Temperature -40˚ to +75˚ Celsius

Available in single or dual window with 1-20 dB values. SC, FC, UPC & APC performance

designs available.

PATCHCORDS & PIGTAILS

Holland Electronics high quality patchcords are available in standard or custom lengths, in UPC, or APC and in sim-

plex or duplex configurations. All patchcords come with a performance certification report and are

guaranteed to meet all specifications.

COUPLERS

Coupler’s configured in bare fiber, connectorized,

open or enclosed with feed-thru’s or connectors.

MODEL ATD-FCU-*

MODEL OCP-*

ATTENUATORS

FIBER OPTIC DISTRIBUTION SYSTEMMODELS ATD-* : PATCHCORDS : OCP-*


FIBER OPTIC

FIBER OPTIC


Page Intentionally Left Blank

FILTERS / DIPLEXERS

FILTERSMODELS BPF-* : CEF750-*


SINGLE CHANNEL BANDPASS FILTER

Available for Channels 2-13, A-I

High Adjacent Channel Rejection

19” Rack Mount

Available for Channels 2-78

Low Insertion Loss on Adjacent Channel

High Rejection of Assigned Channel

SINGLE CHANNEL BANDPASS FILTER : MODEL BPF-*

Bandwidth 6 MHz

Insertion Loss 5 dB (Low & Mid Band), 7 dB (High)

ADJACENT CHANNEL REJECTION

Lower Video -60 dB

Lower Audio -40 dB

Upper Video -40 dB

Upper Audio -60 dB

SINGLE CHANNEL ELIMINATION FILTER : MODEL CEF750-*

Channel Rejection (Min.) -50 dB

ADJACENT CHANNEL INSERTION LOSS

Low Band Models -4 dB

Mid/Hi/Super Band Models -6 dB

Hyper Band Models -7.5 dB

PASSBAND INSERTION LOSS

Passband Frequency 54 - 750 MHz

Super Band 3.5 dB (54 - 600 MHz), 5dB (601 - 750 MHz)

Hyper Band (Ch. AA - Ch. RR) 1.5 dB (54 - 500 MHz), 3.5 dB (501 - 750 MHz)

Hyper Band (Ch. SS - Ch. ZZ) 1.5 dB (54 - 500 MHz), 4 dB (501 - 750 MHz)

Low / Mid / Hi Band 2 dB (54 - 600 MHz)3.5 dB (601 - 750 MHz)

The BPF-* is a 19” rack mount, single channel band pass filter for use when additional channel isolation is required inapplications such as UHF to VHF converters, broadband amplifiers or when an unusually high off-air signal creates unwanted beats or distortion.

SINGLE CHANNEL ELIMINATION FILTER

The CEF750-* is a 19” rack mounted filter intended to eliminate one CATV channel from an adjacent channel system. Applications include replacing one channel or eliminating interfering signals.

MODEL BPF-*

MODEL CEF750-*


FILTERS / DIPLEXERS


FILTERSMODELS HPF-54HR : LPF-* : HPF-* : NF-* : WF-* : BRF-*

Positive and Negative Traps

Low and High Pass, Band Rejection, Window, Data

Wide Operating Temperature

HIGH PASS FILTERS

Small Size

Moisture Resistant

High Performance Seizing Pin for Increased Reliability

High Return Loss

High Sub Band Rejection

PRODUCT NUMBER

LPF-* Low Pass Filter, Channel / Frequency Assignment

HPF-* High Pass Filter, Channel Assignment / Frequency Assignment

NF-* Negative Filter, Channel Assignment / Frequency Assignment

TT-* Tier Trap, Channel Assignment / Frequency Assignment

WF-* Window Filter, Channel Assignment / Frequency Assignment

BRF-* Band Rejection Filter, Channel Assignment / Frequency Assignment

HIGH PASS FILTER : MODEL HPF-54HR

Frequency Range 5 - 1000 MHz

Insertion Loss (54-1000 MHz) 1 dB Max.

Sub Band Rejection (5-40 MHz) -45 dB Min.

Return Loss (54-1000 MHz) 20 dB Min.

Holland Electronics has vast experience in manufacturing custom filters for virtually any application. Our filters and

traps have been used by major MSO’s for over 17 years. We have the ability to produce filters in a variety of case

styles and configurations.

MODEL HPF-54HR

CUSTOM FILTERS: LOW PASS, HIGH PASS, NOTCH & TIER TRAPS

Holland’s HPF-54HR high pass filter attenuates ingressive noise in the sub-band section of the cable spectrum tooptimize return path services. This filter can also be used to eliminate or restrict user access to the sub-band returnfrequencies.


Allows the combining (or separating if used in the reverse ) of Off-Air / CATV signals with satellite signals to acommon cable. Separates TV and satellite signals prior to satellite receiver input and filters harmonics in the off-airspectrum from satellite conversion devices. The DPD2 diplexer is specifically designed for Dish Network’sTM DP44installations, requiring continuous 2 amp power passing.

FILTERS / DIPLEXERS

FILTERS / DIPLEXERSMODELS DPD2 : STVC : SBD : UVSJ : HLSJ


UHF/VHF SEPARATOR/JOINER

The UVSJ combines or separates UHF and VHF signals. Allows balancing of bands prior to amplification and the useof separate amplifiers in a system.

MODEL UVSJ

PORT FREQUENCY (MHz) TYP FREQUENCY TYP

VHF DC - 216 .5 dB 400 - 890 25 dB

UHF 470 - 890 .7 dB DC - 216 25 dB

HIGHBAND/LOWBAND SEPARATOR/JOINER

Combines or separates high and low band VHF signals. Provides low insertion loss prior to channel processing andallows the balancing of bands prior to amplification.

MODEL HLSJ


LOW DC - 130 .5 dB 170 - 600 25 dB

HIGH 170 - 600 .7 dB DC - 130 25 dB

SUB-BAND/CATV SEPARATOR/JOINER

MODEL SBD


SUB 1 - 40 .5 dB 54 - 1000 25 dB

CATV 54 - 1000 .7 dB 1 - 40 25 dB

SATELLITE / OFF-AIR & CATV DIPLEXER

MODEL STVC


VHF/UHF,CATV 5 - 806 1 dB 950 - 2150 22 dB

SATELLITE 950 - 2150 1 dB 5 - 806 25 dB

SATELLITE / OFF-AIR & CATV DIPLEXER (HIGH PERFORMANCE)

MODEL DPD2

PORT FREQUENCY (MHz) QC TYP FREQUENCY QC TYP

VHF/UHF, CATV 40 - 806 1.5 dB 1 dB 950 - 2150 40 dB 40 - 50 dB

SATELLITE 950 - 2150 1.5 dB 1 dB 40 - 806 40 dB 40 - 50 dB

Insertion Loss Rejection




Allows the combining or seperating of return signals sub-bands (1-40 Mhz) and forward signals (54-1000 Mhz). Also pro-

vides low loss sub-band signal insertion in the distribution system or at the head-end. Can be used to enable 1-wayamplifiers to become bi-directional.

The STVC allows the combining or separating of off-air and CATV signals with satellite signals to a common cable.



FILTERS / DIPLEXERS


CABLE DROP PROTECTIONMODELS CCI-1 : CISP : SA-1F : GRB-AR

Blocks 60 Hz Power up to 5,000 Volts

Reduces the Energy Level of Spikes

Eliminates Ground Loop Hum

Blocks 60 Hz Power up to 5,000 Volts

Reduces the Energy Level of Spikes

Eliminates Ground Loop Hum

Does Not Degrade with Repetitive Spikes

Electronic Clamping IC Technology(SIDACtor)

CABLE ISOLATORS

MODEL CCI-1ISOLATOR

MODEL CISPISOLATOR W/SPIKE PROTECTION

Uses Traditional Clamping(Gas Tube Arrestor)

CABLE ISOLATORS CCI-1 CISP


Insertion Loss 1 dB 1 dB

Return Loss ( 1 GHz / 1.5 GHz ) 23 dB / 12 dB 23 dB / 12 dB

RF Shielding > 60 dB > 60 dB

Voltage Breakdown 3 kVA 5 hits, 7 kVA Max 3 kVA 5 hits, 7 kVA Max

Spike Protection (CISP) - See SA-1F Spec Below

Connectors 2 F Female 1 F Male-1 F Female

SA-1F GRB-AR

Frequency Range DC - 1500 MHz DC - 2150 MHz


Return Loss ( 1 GHz / 1.5 GHz ) 25 dB / 12 dB 16 dB

Current Suppression 500 amps (2x10 µs) 750 amps (2x10 µs)

Response Time 1 ns 5 ns

Firing Voltage 65 Volts 90 Volts

RFI Shielding 120 dB 120 dB

SPIKE PROTECTION

MODEL GRB-AR

Prevents dangerous transient spikes from damaging digital set top boxes, cable modems, satellite receivers and anyother equipment on the coax line.

MODEL SA-1F

Electronic Clamping Using IC Technology(SIDACtor)

Faster Response Time

Does Not Degrade with Repetitive Spikes


HEAD-END PRODUCTS

MODULAR HEAD-END SYSTEMMODELS HMMS : HMMA : HMDS : HMMB : HMPS : HMR

SAW Filtered

PLL Oscillator Controlled Modulators

Stereo Encoder Available (ST-MOD]

Microprocessor Controlled (HMMA/HMDS]

Fan Cooled Power Supply for ExtraReliability

International Power Supply (95-240VAC)

Front Panel Controls

Five Year Warranty

FEATURES

Holland Electronic’s Modular Head-End System consists of

a 12-slot mounting chassis and power supply capable of

holding any combination of 12 high-quality SAW filtered

modulators and/or demodulators. The HMR slide-in

mounting system uses only 3.5” of rack height, making for

easy installation and efficient use of space (as simple as

sliding in the modules and plugging in the HMPS power

supply). All components come with a five year warranty.

MODULAR HEAD-END SYSTEM

AVAILABLE OPTIONS


CUSTOMER NOTES: Inverted Channel Format (HMMS)

Stereo Encoder (ST-MOD)

HMMB: Blank Insert for Unused Slots

HMMS-*SAW MODULATOR

HMMAAGILE MODULATOR

HMDSAGILE DEMODULATOR

HMMBBLANK INSERT

HMPSPOWER SUPPLY

DD

HEAD-END PRODUCTS



REQUIRED COMPONENTS

POWER SUPPLY : MODEL HMPS

AC Input 95 - 240VAC (50 - 60 Hz)

DC Output 5VDC, 12VDC

Output Current (Max.) 5.5A @ 5V, 4A @ 12V

Protection Short Circuit & Overload

Regulation 5%

Ripple 25 mV

Operating Temperature 0 to 50˚ Celsius

STEREO ENCODER : MODEL ST-MOD

Audio Input 10K ohms

Input Level .5 - 1.5 V

Output BTSC

Separation 20 dB (50 Hz - 13 kHz)

BLANKS : MODEL HMMB

Single Slot Blank Insert Model HMMB

MOUNTING RACK : MODEL HMR

Width 19”

Height 3.5”

Depth 9”

Capacity 12 Individual Slots (Not Including HMPS)

HMR RACK

HMPS POWER SUPPLY

Power Supply for 12-Slot System.

AVAILABLE OPTIONS

ST-MODConverts right and left audio inputs to stereo output.Small size and lightweight allows for easy integrationwith the HMM* Head-End System.

HMMBBlank insert for unused slots.

12-Slot Modular Chassis.

UL®


MODULAR HEAD-END SYSTEMMODELS HMMS-* : HMMA : HMDS

SAW Filtered

PLL Controlled Oscillator

Front Panel Controls

Low Out-of-Band Noise

LED Channel Display (HMMA/HMDS)

Microprocessor Controlled (HMMA/HMDS)

Stereo Encoder Available (ST-MOD)

Five Year Warranty

FEATURES

The HMMS-* mini-modulator is a commercial grade fixed

channel modulator that integrates with Holland’s Modular

Head-End System. The HMMS-* accepts any A/V base-

band input and modulates to CATV channels 2-135.

HMMS : FIXED SAW MODULATOR

The HMMA is a high quality SAW filtered frequency agile

modulator covering 860 MHz and has been designed to

meet high CATV performance standards. Low out-of-band

noise makes it ideal in adjacent channel head-ends.

HMMA : AGILE SAW MODULATOR

The HMDS is a commercial grade frequency agile mini

demodulator for use with Holland’s Modular Head-End

System. With SAW filtering and PLL controlled oscillators

for enhanced adjacent channel performance.

HMDS : AGILE DEMODULATOR


CUSTOMER NOTES:

HEAD-END PRODUCTS

MODEL HMMS-* MODEL HMMA MODEL HMDS

DD

AVAILABLE OPTIONS

Inverted Channel Format (For HMMS)


HRC & IRC Offsets Available (For HMMS)



HEAD-END PRODUCTS

SPECIFICATIONS

RF HMMS-* HMMA

Output Channels: 2 - 117 CATV (54-750 MHz)14 - 59 UHF (470-750 MHz)

2 - 135 CATV (54 - 860 MHz)14 - 69 UHF (470 - 806 MHz)

FCC Offsets (Where Applicable) ±12.5 kHz, ±25 kHz ±12.5 kHz, ±25 kHz

Output Level 30 - 45 dBmV (Adj.) 30 - 45 dBmV (Adj.)

A/V Ratio -11 to -18 dB (Adj.) -11 to -18 dB (Adj.)

Frequency Stability ±5 kHz (Meets FCC Docket 21006) ±5 kHz (Meets FCC Docket 21006)

Aural Carrier Frequency 4.5 MHz ± 5 kHz 4.5 MHz ± 5 kHz

Spurious Outputs -60 dBc -60 dBc

C/N (In-Band) 60 dB 60 dB

Out-of-Band Noise -95 dBc -78 dBc

Output RL 12 dB 12 dB

VIDEO

Input Level (Min.) .5V p-p (for 87.5% Modulation) .8V p-p (for 87.5% Modulation)

Frequency Response ±1.5 dB (50 Hz - 4.2 MHz) ±1.5 dB (50 Hz - 4.2 MHz)

Video C/N 60 dB 60 dB

Hum/Noise -60 dB -60 dB

Modulation Range 0 - 90% 0 - 90%

Input Impedance 75 Ohms 75 Ohms

Differential Phase ±5˚ ±3˚

Differential Gain ±5% ±5%

Group Delay 75 ns 75 ns

AUDIO

Input Level .5V p-p (25 kHz Dev) .5V p-p (25 kHz Dev)

Input Impedance 5k Ohms 10k Ohms

Distortion (THD) 1% 1%

Flatness ±1 dB (50 Hz - 15 kHz) ±1 dB (50 Hz - 15 kHz)

Pre-Emphasis 75 µs (Switchable) 75 µs (Switchable)

BTSC Stereo Encoder Optional Optional

CONNECTORS

Video Input, RF Output F F

Audio Input RCA RCA

GENERAL

Power Requirements 5VDC@ 190mA, 12VDC@ 100mA 5VDC @ 280mA, 12VDC @ 400mA


Dimensions 1” x 3.1” x 7.5” 1” x 3.1” x 7.5”

Weight .75 lbs. .75 lbs.

RF HMDS

Input Channels 2-125 CATV/HRC/IRC 14 - 69 UHF (470 - 806 MHz)

Input Power Range 0 - 25 dBmV

Noise Figure 6 dB: VHF / 8 dB: UHF

VIDEO

Output Level .5 - 1.2V p-p (Adj.)

Impedance 75 Ohms

Frequency Response ± 2 dB

Differential Phase ± 5˚

Differential Gain ± 5%

AUDIO


Output Impedance 600 Ohms

Distortion (THD) 2%

CONNECTORS

RF Input, Video Output F

Audio Output RCA

GENERAL

Power Requirements 12VDC, 5VDC @ 150 mA

Operating Temperature 0 to 50˚ Celsius

Dimensions 1” x 3.1” x 8.5”

Weight .75 lbs.


FIXED CHANNEL MODULATORSMODELS HPM55-* : HSM55-*

18 Years of Proven Reliability

Adjacent Channel Performance (Except Sub-band)



Complies with FCC Offsets & Accuracy

Requirements

Includes New Video Low Pass Filter

T8 - T14 Available (HPM)

FEATURES

The HPM55-* is an adjacent channel audio/video

modulator specifically designed for head-ends requiring

proven performance. The HPM55’s internal filters provide

sharp VSB rejection for adjacent channel operation while

maintaining similar C/N and video response found in more

expensive SAW modulators.

The HSM55-* is the same proven modulator as the

HPM55-* with additional SAW filtering providing

unparalleled adjacent channel performance.

HPM55-* : FIXED CHANNEL MODULATOR

HSM55-* : FIXED CHANNEL MODULATOR


CUSTOMER NOTES:DD

HEAD-END PRODUCTS

MODEL HPM55-*

MODEL HSM55-*

AVAILABLE OPTIONS


FIXED CHANNEL MODULATORS


HEAD-END PRODUCTS

SPECIFICATIONS

RF HPM55-* HSM55-*

Output Channels:2 - 13 CATV (54 - 216 MHz)

A - W CATV (121 - 300 MHz)T8 - T14 CATV (13 - 54 MHz)

2 - 125 CATV (54 - 750 Mhz)14 - 69 UHF (Optional)

FCC Offsets (Where Applicable) ±12.5 kHz, ±25 kHz ±12.5 kHz, ±25 kHz




Aural Carrier Frequency 4.5 MHz ± 1.5 kHz 4.5 MHz ± 1.5 kHz





VIDEO

Input Level (Min.) .5V p-p min. (for 87.5% Modulation) .5V p-p min. (for 87.5% Modulation)

Frequency Response ±2 dB (50 Hz - 4.2 MHz) ±1.5 dB (50 Hz - 4.2 MHz)






Differential Gain ±3% ±3%


AUDIO


Input Impedance 600 Ohms (Unbalanced) 600 Ohms (Unbalanced)

Distortion (THD) 1.5% 1.5%


Pre-Emphasis 75 µs 75 µs


CONNECTORS

Video Input, RF Output F F

Audio Input F F

GENERAL



Dimensions 19” x 1.75” x 3” 19” x 1.75” x 3”

Weight 5 lbs. 5 lbs.

Auxiliary Outlet 117VAC, 600 W 117VAC, 600 W

Test Port -20 dB -20 dB


HMA SERIES AGILE MODULATORSMODELS HMA-550H : HMA-860H

60 dBmV Output

Triple I.F. Loop

SAW Filtered


Crystal Referencing PLL Tuning

International Power Supply (90-260VAC)

BTSC Stereo Compatible (ST-MOD)

Easy-to-Read LED Channel Display

Overmodulation Indicators

FEATURES

The HMA-550H and the HMA-860H are commercial grade,

SAW filtered, frequency agile modulators specifically

designed to meet the highest CATV performance

standards. All channels are easily selected using front

panel buttons and verified with an easy-to-read LED chan-

nel display. The modulators feature extremely low out-of-

band noise allowing their use in large channel capacity

head-ends. The HMA-550H and the HMA-860H modulators

are the ideal choice for any system where performance,

flexibility, and reliability are required.

FREQUENCY AGILE MODULATORS


CUSTOMER NOTES:DD

HEAD-END PRODUCTS

MODEL HMA-550H

MODEL HMA-860H

AVAILABLE OPTIONS


HMA SERIES AGILE MODULATORS


HEAD-END PRODUCTS

SPECIFICATIONS

RF HMA-550H HMA-860H

Output Channels: 2 - 78 CATV (54 - 550 MHz)2 - 135 CATV (54 - 860 Mhz)14 - 69 UHF (471 - 801 Mhz)

FCC Offsets (Where Applicable) ±12.5 kHz, ±25 kHz (Selectable) ±12.5 kHz, ±25 kHz (Selectable)




Aural Carrier Frequency 4.5 MHz ± 1 kHz 4.5 MHz ± 1 kHz





VIDEO

Input Level (Min.) .7V p-p (for 87.5% Modulation) .7V p-p (for 87.5% Modulation)

Frequency Response ±1 dB (50 Hz - 4.2 MHz) ±1 dB (50 Hz - 4.2 MHz)






Differential Gain ± 5% ± 5%


AUDIO


Input Impedance 600 Ohms (Unbalanced) 600 Ohms (Unbalanced)

Distortion (THD) 1% 1%


Pre-Emphasis 75 µs 75 µs


CONNECTORS

Video Input, RF Output, IF F F

Audio Input RCA RCA

GENERAL

Power Requirements 90 - 260VAC (50 - 60 Hz), 25 W 90 - 260VAC (50 - 60 Hz), 25 W


Dimensions 19” x 1.75” x 12” 19” x 1.75” x 12”


Auxiliary Outlet Yes Yes



SAW FILTERED MODULATORMODEL SAWM60-*

60 dBmV Output


SAW Filtered


I.F. Loop (Triple I.F. Loop Available)

Overmodulation Indicators

BTSC Stereo Compatible (ST-MOD)

FEATURES

The SAWM60-* is a commercial grade fixed channel

modulator specifically designed for crowded head-end

systems requiring high performance and reliability. The

SAWM60-* incorporates SAW filtering, heterodyne

processing, and output band pass filtering to provide

excellent rejection. The simplicity of the fixed channel

design provides high reliability and stability over agile units.

FIXED CHANNEL SAW FILTERED MODULATOR


CUSTOMER NOTES:

HEAD-END PRODUCTS

MODEL SAWM60-*

DD

AVAILABLE OPTIONS


SAW FILTERED MODULATOR


HEAD-END PRODUCTS

SPECIFICATIONS

RF SAWM60-*

Output Channels 2 - 117 CATV (54 - 750 MHz)14 - 59 UHF (Optional)

FCC Offsets (Where Applicable) ±12.5 kHz, ±25 kHz (Selectable)

Output Level 45 - 60 dBmV (Adj.)

A/V Ratio -9 to -20 dB (Adj.)

Frequency Stability ±5 kHz (Meets FCC Docket 21006)

Aural Carrier Frequency 4.5 MHz ± 1 kHz

Spurious Outputs -60 dBc

C/N (In-Band) 60 dB

Out-of-Band Noise -90 dBc

Output RL 15 dB

VIDEO

Input Level (Min.) .5V p-p (for 87.5% Modulation)

Frequency Response ±1.2 dB (50 Hz - 4.2 MHz)

Video C/N 62 dB

Hum/Noise -62 dB

Modulation Range 0 - 90%

Input Impedance 75 Ohms

Differential Phase ±5˚

Differential Gain ±5%

Group Delay 75 ns

AUDIO

Input Level .5V p-p (25 kHz Dev)

Input Impedance 600 Ohms (Unbalanced)

Distortion (THD) 1%

Flatness ±1 dB (50 Hz - 15 kHz)

Pre-Emphasis 75 µs

BTSC Stereo Encoder Optional

CONNECTORS

Video Input, RF Output, IF F

Audio Input RCA

GENERAL




Weight 8.5 lbs.

Auxiliary Outlet 117VAC, 600 W

Test Port -30 dB


HPH SERIES AGILE PROCESSORSMODELS HPH-860 : HPH-860AD

60 dBmV Output

Dual Saw Filtering

Double Heterodyne Conversion

Maintains Broadcast Stereo Format

Precise Signal Regulation

Front Panel LED Channel Display

International Power Supply (90 - 260VAC)

Adjacent Channel Performance

FEATURES

The HPH Series frequency agile processors have been

designed to convert any off-air or cable channel to any

unused cable channel. All channel conversions are

performed using simple front panel buttons and a large LED

display indicating input and output channels. Frequency

control is accomplished by a microprocessor controlled,

PLL synthesized tuning circuit to assure accurate, stable

operation. The HPH Series uses dual SAW filtering to assure

high out-of-band rejection, as well as high reliability. A CATV

hybrid amplifier is used for low distortion and high output

performance.

The HPH-860AD digital processor utilizes sophisticated

SAW filters and circuitry specifically designed to process

digital signals in addition to analog, retaining the digital

integrity of broadcast channels.

FREQUENCY AGILE PROCESSORS


CUSTOMER NOTES:DD

HEAD-END PRODUCTS

MODEL HPH-860

MODEL HPH-860AD

HPH SERIES AGILE PROCESSORS


HEAD-END PRODUCTS

SPECIFICATIONS

INPUT SECTION HPH-860 HPH-860AD

Input Channels 2 - 125 CATV/HRC (54 - 806 MHz)14 - 69 UHF (470 - 806 Mhz)

2 - 125 CATV/HRC (54 - 806 MHz)14 - 69 UHF (470 - 806 Mhz)

Selectivity -60 dB (Adj. Ch.) -60 dB (Adj. Ch.)

Noise Figure 8 dB: CATV / 10 dB: UHF 8 dB: CATV / 10 dB: UHF

Input Range 0 - 30 dB 0 - 30 dB Analog / -32 to +4 dB Digital

Tuning PLL PLL

OUTPUT SECTION

Output Channels 2 - 135 CATV/HRC (54 - 860 MHz)14 - 69 UHF (470 - 806 Mhz)

2 - 135 CATV/HRC (54 - 860 MHz)14 - 69 UHF (470 - 806 Mhz)

FCC Offsets (Where Applicable) ±12.5 kHz, ±25 kHz (Selectable) ±12.5 kHz, ±25 kHz (Selectable)



Aural Carrier 0 - 10 dB (Adj.) 0 - 10 dB (Adj.)

I.F. Output 35 dBmV @ 45.75 MHz 35 dBmV @ 45.75 MHz

Frequency Response ± 2 dB ± 2 dB




Return Loss 12 dB 12 dB

CONNECTORS

RF Input, RF Output, IF F F

GENERAL

Power Requirements 90 - 260VAC (50 - 60 Hz), 20 W 90 - 260VAC (50 - 60 Hz), 20 W


Dimensions 19” x 1.75” x 12” 19” x 1.75” x 12”


Auxiliary Outlet Yes Yes



HD SERIES DEMODULATORS MODELS HDTV-ST2 : HDM-1

8 VSB Digital Off-Air Tuner (HDTV-ST2)

Low Distortion

Agile Input

SAW Filtered (HDM-1)

Non-Volatile Memory (On-Channel Power Up)

Front Panel LED Channel Display (HDM-1)

Adjustable A/V Outputs (HDM-1)

BTSC Stereo Output (HDM-1)

FEATURES

The HDM-1 frequency agile demodulator (analog) is

designed to receive and demodulate any VHF, UHF, and

CATV channel to baseband audio, and video. The HDM-1

uses a microprocessor driven PLL synthesized tuning cir-

cuit to assure accuracy. The microprocessor controls all

functions and provides for easy channel selection using

front panel channel up/down buttons.

HDM-1 : FREQUENCY AGILE DEMODULATOR

The HDTV-ST2 digital 8VSB tuner can be used as a stand

alone digital receiver delivering high resolution signals for

an unsurpassed viewing experience. The HDTV-ST2 can

also be used in head-end environments to deliver

perfect digital quality reception in your Head-End system.

HDTV-ST2FREQUENCY AGILE DEMODULATOR (DIGITAL)


CUSTOMER NOTES:DD

HEAD-END PRODUCTS

MODEL HDTV-ST2 MODEL HDM-1

HD SERIES DEMODULATORS


SPECIFICATIONS

66 |

HEAD-END PRODUCTS

RF HDM-1

Input Channels 2 - 125 CATV (54 - 806 MHz)14 - 61 UHF (470 - 806 Mhz)

Input Power Range -5 to 30 dBmV

Noise Figure 8 dB: CATV / 8 dB: UHF

VIDEO


Impedance 75 Ohms

Frequency Response ±2 dB

Differential Phase < 5°

Differential Gain < 5%

AUDIO


Impedence 600 Ohms

Harmonic Distortion (THD) 2%

Outputs Baseband / MPX / 4.5 MHz

CONNECTORS

RF In, Video Out, Audio Out,4.5 MHz, MPX Out F

GENERAL



Dimensions 19” x 1.75” x 3.5”

Weight 5 lbs.

RF HDTV-ST2


Input Power Range -23 to 25 dBmV

Formats ATSC, 8VSB

VIDEO

Formats Baseband, Component, S-Video

Aspect Ratio 4:3 / 16:9

Resolution 1080i, 720p, 480p, 480i

AUDIO

Formats Dolby Digital / PCM Stereo

Sample Rate 32 kHz / 44.1 kHz / 48 kHz

DATA I/O

Connector RS-232

FRONT PANEL

7 Key Function Controls

Status LED (Power & Channel Lock)

REMOTE CONTROL

30 Key

POWER SUPPLY

Input Voltage 117VAC, 60 Hz

Output Voltage 12VDC, 1.2A (Center +)

CONNECTORS

RF In F

Outputs Composite Video, Component Video, A/V = RCAS-Video , SPDIF Optical Audio

GENERAL


Dimensions 9” x 6” x 3”

Weight 1.6 lbs.


SINGLE CHANNEL AMPLIFIERMODEL HSA-*

High Adjacent Channel Rejection

Low Noise Circuitry

Low AGC Threshold (-2dBmV)

Adjustable Aural Carrier Levels

AGC Controlled Constant Output

Auxiliary AC Outlet

FEATURES

The HSA is a single channel amplifier designed for use in

head-end’s with adjacent channels. The AGC accepts a

wide input level range while maintaining a consistent out-

put. A low noise input amplifier provides the cleanest pic-

ture at low input levels.

SINGLE CHANNEL AMPLIFIER


CUSTOMER NOTES:

HEAD-END PRODUCTS

MODEL HSA-*

DD

SINGLE CHANNEL AMPLIFIER


HEAD-END PRODUCTS

RF HSA-*

Input Channels 2 - 13 VHF

Gain 50 dB

AGC Range -2 to 30 dBmV

Maximum Input 30 dBmV

Maximum Output 43 - 55 dBmV (Adj.)

Output Range 12 dBmV

Frequency Response ±1.5 dB

Aural Carrier Trap Range 0 to -12 dB

Adjacent Channel Rejection (±4 MHz from center) -35 dB

Non-Adjacent Channel Rejection -60 dB

Impedance 75 Ohms

AGC Stiffness ±1 dB

Noise Figure 4 dB

Return Loss 14 dB

CONNECTORS

RF Input, RF Output F

GENERAL




Weight 4 lbs.

Auxiliary Outlet 117VAC, 60 Hz

Test Port -20 dB

SPECIFICATIONS


RACK MOUNTED AMPLIFIERSMODELS HCA-3051RK : HCA-3086RK

Push-Pull CATV Hybrid Amplifier

High Output/High Channel Capacity

Adjustable Gain & Slope

-30 dB Output Test Port

Auxiliary AC Outlet

FEATURES

Holland’s HCA-3051RK and HCA-3086RK are rack-mountable

high-output hybrid amplifiers perfect for any head-end appli-

cation.

These amplifiers utilize push-pull CATV hybrid circuitry

assuring extremely low noise and distortion.

Front panel adjustable slope and gain allow easy system

balancing.

RACK MOUNTED LAUNCH AMPLIFIERS


CUSTOMER NOTES:

HEAD-END PRODUCTS

MODEL HCA-3051RK

MODEL HCA-3086RK

DD

RACK MOUNTED AMPLIFIERS


HEAD-END PRODUCTS

RF HCA-3051RK HCA-3086RK

Frequency 54 - 550 MHz (2 - 78) 54 - 860 MHz (2 - 135)

Gain 30 dB 30 dB

Gain Adjustment Range 10 dB 20 dB

Maximum Input 15 dBmV (77 Ch.) 12 dBmV (134 Ch.)

Maximum Output 45 dBmV (77 Ch.) 42 dBmV (134 Ch.)

Slope 0 - 10 dB (Adj.) 0 - 15 dB (Adj.)

Flatness ±1 dB ±1 dB

Noise Figure 7.5 dB 7.5 dB

Input Return Loss 16 dB 16 dB

Output Return Loss 16 dB 16 dB

Cross Modulation (XMOD) -58 dB -58 dB

Composite Triple Beat (CTB) -60 dB -60 dB

Hum Modulation -60 dB -60 dB

CONNECTORS

RF In, RF Out F F

GENERAL



Dimensions 19” x 1.75” x 3.5” 19” x 1.75” x 3.5”



SPECIFICATIONS

NOTE: Two-way compatible using optional SBD Diplexer. See page 51 for SBD specifications.


HEAD-END COMBINERSMODELS HCG-12 : HCG-24 : AHC-16-860

High Isolation Design

Consistent Port to Port Performance

Front Panel Test Port

Low Distortion Hybrid Amplifier (AHC-16-860)

FEATURES

The HCG Series (12 port / 24 port) passive head-end

combiners are designed to combine multiple RF inputs into

a single RF output while maintaining high isolation between

ports. The HCG Series combiners operate at a

full 1 GHz passband.

HCG-12 : HCG-24 : PASSIVE COMBINERS


CUSTOMER NOTES:

HEAD-END PRODUCTS

MODEL HCG-12

MODEL HCG-24

MODEL AHC-16-860

DD

The AHC-16-860 is a high isolation 16 channel active head-

end combiner utilizing an integrated CATV hybrid push-pull

amplifier. The AHC-16-860 provides gain to overcome

insertion loss and drive the distribution system. This

combiner features a front panel gain control and a -20 dB

test port.

AHC-16-860 : ACTIVE COMBINER

HEAD-END COMBINERS


HEAD-END PRODUCTS

RF HCG-12 HCG-24

Frequency 5 - 1000 MHz 5 - 1000 MHz


Port-to-Port Isolation 30 dB 35 dB

Input Return Loss 18 dB 22 dB

Output Return Loss 12 dB 12 dB

GENERAL


Dimensions 19” x 1.75” x 3.5” 19” x 1.75” x 3.5”



SPECIFICATIONS

RF AHC-16-860


Gain 6 - 12 dB (Adj.)

Port-to-Port Isolation 40 dB

Input Return Loss 16 dB

Output Return Loss 14 dB

Maximum Input Level 58 dBmV (16 Ch.)

GENERAL




Weight 4.5 lbs.

Test Port -20 dB

Auxiliary Outlet Yes


RACK MOUNTED MULTI-SWITCHESMODEL HMS-16APR : HMS-412 ARK

FEATURES


HEAD-END PRODUCTS

Single Satellite Input (HMS-16APR)

Multi-Satellite Input (HMS-412ARK)

Low Distortion Amplification

Provides LNB Powering

Generates 22 kHz Tone (HMS-412ARK)

High Isolation

High Reliability

The HMS-16APR is a rack mounted multiswitch specifically

designed for SMATV applications. The switch generates the

voltage required for powering a dual LNB (13 & 18 volts).

Also provides amplification to help overcome the insertion

loss of the 16 outputs.

SINGLE SATELLITE SWITCH

The HMS-412ARK is a 4 LNB input, 12 output multiswitch

designed to provide solid state multi-sat switching for head-

end systems. This unit provides 13 and 18 volts as well as 22

kHz tone to lock the LNB’s on the required satellites.

MULTI-SATELLITE SWITCH

CUSTOMER NOTES:DD

MODEL HMS-16APR

MODEL HMS-412ARK

HEAD-END PRODUCTS

RACK MOUNTED MULTI-SWITCHES


SPECIFICATIONS

74 |

RF HMS-16APR HMS-412ARK

Input Frequency 950 - 2150 MHz 950 - 2150 MHz

LNB Power 13V, 18V 13V + 0 kHz, 18V + 0 kHz13V + 22 kHz, 18V + 22 kHz

Insertion Loss -4 dB 950-2150 MHz 3 dB Gain 950 - 2150 MHz

Isolation 25 dB 30 dB

Switching Voltage (Rx to Switch) 13/18VDC 13/18VDC, 0/22 kHz

CONNECTORS

All Ports F F

GENERAL

Power Requirements 24VDC, 600 mA Center + (AC to DC Transformer Included) 117VAC, 60 Hz, 26 W


Dimensions 19” x 1.75” x 3.5” 19” x 1.75” x 5.5”


SUB-BAND TO HIGH-BAND CONVERTERMODEL SHC

Converts Sub-Band to High-Band

LED Power Indicator

Can be Used with Optional SBD

Sub-Band Diplexer

FEATURES

The SHC converter is ideal for use in head-end and local

origination applications. In head-end applications, the SHC

is used to convert the incoming sub-band (T7 - T13) to

VHF (7 - 13).

For local origination applications, the SHC can be used in

offices, hospitals, or any situation where sub-band can be

utilized to allow a TV within the system to view channels

not available to others. These converted sub-band

channels can then be redistributed using standard

processors and demodulators.

SUB-BAND TO HIGH-BAND CONVERTER


UL®

| 75

CUSTOMER NOTES:

HEAD-END PRODUCTS

MODEL SHC

DD

SUB-BAND TO HIGH-BAND CONVERTER


HEAD-END PRODUCTS

RF SHC

Input Channels T7 - T13 (7 - 47 MHz)

Output Channels 7 - 13 (174 - 216 MHz)(T7 converts to Ch. 7, etc.)

Insertion Loss -7 dB

Frequency Stability ±5 kHz

Input Level Range 5 - 30 dBmV

POWER SUPPLY

Input Voltage 120VAC, 60 Hz

Output Voltage 18VDC @ 100 mA

GENERAL

Weight 1.5 lbs.

Dimensions 6” x 3” x 1.5”

SPECIFICATIONS

Channel 7 - 13

SUB

FORWARD

T7 - T13

A

A

A

AA

HEAD-END

PROCESSOR

SHC

SBD

FORWARD

SUB

A

A A

A

DC

SBD

SBD

SHC

A/B

LOCAL ORIGINATION SOURCE

TV

HEAD-END

LOCAL ORIGINATION APPLICATIONS

HEAD-END APPLICATIONS


HEAD-END PRODUCTS

HEAD-END ACCESSORIESMODELS MOR-71 : ORS : RK-6S : RK6-2800 : HAC-10RK : RSW : PRE-BUILT


Holland offers vertical receiver racks to fit most receivers available today.

These racks hold 6 to 9 receivers (depending on receiver model used)

securely in a head-end rack. Some models include infra-red block plugs to

prevent unwanted channel changes. Other models (not shown) available.

The ORS rack shelf is ideal for DBS receivers, DVD players,

monitors, or other non-rack mounted equipment. Black fin-

ish, 19” x 2 3/4” x 12 1/2”. Rated to 15 lbs.

The MOR-71 is a standard 71” equipment rack and is solidly constructed from 12-

gauge steel with fine-thread panel mounting screw holes and a scratch resistant

black hammer-tone finish. The rack has multiple shelving options and a mounting

capacity of up to 40 1 3⁄4” rack devices. The MOR-71 is suitable for all industry stan-

dard 19” panel widths and utilizes a rack footprint of 2’ x 2’ for added stability.

Meets EIA standard RS310C 19” rack spacing. Assembly required.

VERTICAL RECEIVER RACKS

19” RACK SHELF

EQUIPMENT RACK

MODEL RK-6S

MODEL RK6-2800

MODEL ORS

MODEL MOR-71

HEAD-END ACCESSORIES


HEAD-END PRODUCTS

RACK SCREWS

RSW rack screws are black anodized and precision threaded. Available in bags of 100

with non-scratch washers included.

PRE-BUILT HEAD-END SYSTEMS

Standard rack mounted power strip containing 10 surge

protected AC outlets and a relay switch for over-current

protection and a power rating of 15 amps.

10-OUTLET POWER STRIP

MODEL HAC-10RK

MODEL RSW

All Systems Burned In & Balanced

Mini-Mods & Full-Size Available

Color Coded Interconnects

5-Year Warranty

Holland Electronics is proud to offer pre-racked head-ends to simplify

your next commercial installation. We offer both mini-mods and full-sized

modulators or a combination of both if desired. All of our head-ends are

balanced, burned in, and then re-tested to ensure signal stability before

arrival to the job site.

Pre-racked head-ends include all adapters, cables, interconnects and

components necessary for plug and play operations and carry a 5-year

warranty on all parts.

HOME CONSUMER PRODUCTS

HMM SERIES MULTIMEDIA MODULATORSMODELS HMM-10H : HMM-3

High Output (25 dB)

Push Button Programming

Non-Volatile Memory

LED Front Panel Display

Built-In Combiner (HMM-3)

Switchable Video Impedance (For Loop Thru)

FEATURES

The HMM-10H and HMM-3 are microprocessor controlled

agile modulators (CATV ultraband and UHF) developed for

use in adding satellite, VCR, DVD, or security video

channels to an existing home distribution system.

MULTIMEDIA MODULATORS

The HMM-10H accepts one audio/video input source and

modulates to a single RF output.

HMM-10H : SINGLE MODULATOR

The HMM-3 accepts three audio/video input sources and

modulates to three different non-adjacent channels that

are combined into a single output.

HMM-3 : TRIPLE MODULATOR


CUSTOMER NOTES:

MODEL HMM-3MODEL HMM-10H

DD


HMM SERIES MULTIMEDIA MODULATORS


SPECIFICATIONS

RF HMM-10H HMM-3


Output Channels: CATV: 65 - 135, UHF: 14 - 78 CATV: 65 - 135, UHF: 14 - 78

Output Level 25 dBmV 25 dBmV (15 dB Adj.)

Frequency Stability PLL Crystal Stabilized ±5 kHz PLL Crystal Stabilized ±5 kHz

VIDEO

Input Level (Min.) 1V p-p (for 87.5% Modulation) 1V p-p (for 87.5% Modulation)

AUDIO 1 3

Input Level 1V RMS, 10K Ohms 1V RMS, 10K Ohms

CONNECTORS

Video In, Audio In RCA RCA

RF Output F F

GENERAL


Operating Temperature 0° to 50° Celsius 0° to 50° Celsius

Dimensions 3.5” x 3.75” x 1.15” 5.5” x 3.25” x 1.15”

Weight .45 lbs. .6 lbs.

SINGLE MODULATOR INSTALLATION

TRIPLE MODULATOR INSTALLATION



SIGNAL COMBINERS/AB SWITCHESMODELS SC-3 : SC-4 : AB-90 : AB-4 : AB-75


The SC-3 and SC-4 are multi-filter channel combiners enabling locally originated

channels (3 or 4) to be combined and balanced with off-air signals resulting in a

clean insertion of channel 3 or 4 into a distribution system.

SIGNAL COMBINERS

The AB-90 is the latest design of high isolation RF switches having the advantage

of top mounted push buttons. The AB-90 is designed to have higher isolation and

increased reliability over other push button switches. The AB-4 features the same

performance as the AB-90 with forward facing push buttons.

PUSH BUTTON AB SWITCHES

SLIDE SWITCH

The AB-75 is an economy RF AB switch for applications where standard

performance is acceptable.

INSERTION LOSS : ANTENNA TO TV

Ch. 2 & 4 (SC-3), Ch. 3 & 5 (SC-4) -1 dB

Ch. 3 (SC-3), Ch. 4 (SC-4) -25 dB

MODEL AB-90, AB-4

Frequency Range DC - 2 GHz

Isolation90 dB, 54 - 216 MHz70 dB, 216 - 750 MHz60 dB, 750 - 1 GHz

Return Loss 20 dB

Insertion Loss <1 dB (DC - 1 GHz)

INSERTION LOSS : CH.3 (SC-3) CH.4 (SC-4) TO TV

Ch. 2 Video (SC-3), Ch. 3 Video (SC-4) -35 dB

Ch. 4 Video (SC-3), Ch. 5 Video (SC-4) -15 dB

Ch. 3 (SC-3), Ch. 4 (SC-4) To TV -4 dB

Balance Adjustment Range 10 dB

MODEL SC-3

MODEL AB-90

MODEL SC-4

MODEL AB-75

MODEL AB-4




VIDEO CAMERASMODELS CBW-1P : CCOL-1 : CBW-1LED

Water Resistant Cases

Mini-Bullet Design

1/3” CCD (B&W), 1/4” CCD (Color)

Power Supply Included

FEATURES

CBW-1WP CCOL-1 CBW-1LED

Image Device 1/3” CCD 1/4” CCD 1/3” CCD

Resolution 480 480 480

Min. Illumination .1 lux (f=1.2) 1 lux .1 lux (LED off)

Power Requirements 12VDC, 1.3 W 12VDC, 1.5 W 12VDC, 1.3 W

Dimensions .9”Diameter 2.2” Length

.8”Diameter2.2” Length

1.4”Diameter 2” Length

Lens 3.6 mm 3.6 mm 3.6 mm

Angle of View 45˚ 45˚ 45˚

©All Holland camera’s use Sony CCD’s and come in water-resistant cases. They provide unmatched clar-

ity, even in low light environments. All cameras include mounting hardware.

SECURITY VIDEO CAMERAS

MODEL CBW-1PBLACK & WHITE

MODEL CCOL-1COLOR

MODEL CBW-1LEDBLACK & WHITE

WITH NIGHT VISION

480 Line Resolution

LED Infra-Red Illumination (CBW-1LED)

Mounting Bracket Included

INSTALLATION MATERIALS

INSTALLATION MATERIALSBP SERIES : WP SERIES : WPG SERIES


WP SERIES: WALL PLATES WITH STANDARD SPLICE

WPG SERIES : 3 GHz WALL PLATES WITH PATENTED HIGH PERFORMANCE 3 GHz SPLICE

The WP Series wall plates use the same high-impact plastic as our BP Series. Available in combinations utilizing our

standard F splice and telephone jacks. Available in ivory or white.

WPG Series wall plates use Holland Electronics patented high-return loss 3 GHz splice and trademarked blue insula-

tor. Ideal for CATV and satellite applications. Available in combinations utilizing our 3 GHz splice and telephone jacks.

All modular receptacles are 4 conductor type. Available in ivory and white.

WP-81* WP-81D*

WP-81G* WP-81GD*

BP-1* BP-4* BP-2*

WP-T81G* WP-T81GD*

WP-T81* WP-T81D*

BP SERIES: BLANK WALL PLATES

Holland’s blank wall plates are made from high-impact plastic, available with one or two 3/8” holes (inset hex).

Available in ivory or white.

* = COLOR: IV=ivory / WH=white

All telephone jacks are 6P4C. Splice patents #5,863,226 / #5,498,175 / #5,667,409 / #6,113,431 / #6,276,970



INSTALLATION MATERIALSMODELS CC-* : CT-* : FTB-* : WB-1UV : WS-*

Inhibits moisture in F connections by maintaining a tight seal around the

connector and cable. UV resistant and ribbed for easy installation.

Weather seals are used on standard “F” female ports for weather-proofing the

F connector and F port connection. Recommended for all outdoor installations.

Available in 1/4” (WS-250), 3/8” (WS-375) and 1/2” (WS-500) thicknesses.

MODEL CC-6*, CC-7*, CC-155*

MODEL CT-*

MODEL WB-1UV

WS-250, WS-375, WS-500

High impact plastic clips with pre-installed steel nails. Suitable for wood or masonry applications.

Available in black or white.

CABLE CLIPS CABLE TYPE NAIL LENGTH

CC-3.5B, CC-3.5I Ground Wire .59”

CC-6B, CC-6I Series-59 Cable 1.1”

CC-7B, CC-7I Series-6 Cable 1.1”

CC-135B, CC-135I Series-59 Dual 1.1”

CC-155B, CC-155I Series-6 Dual 1.1”

CABLE TIES NOMINALLENGTH

MIN. TENSILESTRENGTH

MAX. BUNDLEDIAMETER

CT-20* 4” 20 lbs. 1”

CT-30* 6” 30 lbs. 1 1/4”

CT-50* 8” 50 lbs. 2 3/4”

CT-11* 11” 75 lbs. 3 1/4”

CT-14* 14” 120 lbs. 4”

MODEL

MODEL

CABLE CLIPS

CABLE TIES

WEATHER BOOT

WEATHER SEALS

Holland’s feed through bushings are made from UV stabilized ABS plastic.

Available in black or white, single or dual cable bushings available.FTB-56 / FTB-59

FEED THROUGH BUSHINGS

High tensile strength nylon cable ties.

Available in black or white.

* = COLOR: B=black / W=white


INSTALLATION MATERIALSMODELS TE-* : SFT-* : RTV-3 : VC-6-5


TELECOMMUNICATION ENCLOSURES

MODEL DIMENSIONS

TE-128 2.75” X 4.8” X 9”

TE-130 2.9” X 5.55” X 7.1”

TE-136 3” X 7.8” X 10.5”

TE-140 4.1” X 9.2” X 13”

Mount passives, amplifiers and connections in a secure box. Available in four sizes.

SELF-AMALGAMATING TAPE

Holland’s SFT-* is an ethylene propylene rubber based tape which provides

excellent moisture and corrosion protection. SFT-* tape is self-amalgamating, which

when properly installed melds together to create a tight fitting permanent protective

seal. SFT-* is an all purpose tape providing superior UV and ozone

protection plus low temperature (-55˚) flexibility.

SFT-130: 1” x 30’

SFT-150: 1.5” x 15’

SILICONE SEALANT

Silicone sealants are ideal for use with feed thru bushings and connectors where a

flexible weather seal is important. UV and heat resistant, this sealant provides years

of worry free weather sealing.

SILICONE GREASE

Silicone dielectric compound is ideal for use with CATV connectors as a high voltage

insulator, corrosion preventative, moisture barrier and for flashover protection for

electrical insulators.

TE-128, TE-130, TE-136, TE-140

MODEL

SFT-130 & SFT-150

MODEL RTV-3

MODEL VC-6-5

For Indoor or Outdoor Use

Durable Polypropylene Material

Secures with a Lock, Clasp, or CATV Locking Terminator

Weather Resistant Cable Entry

MODEL



HARDWAREMODELS A-6 : A-10 : A-2 : A-3 : A-22

MODEL DESCRIPTION MATERIAL

A-6 J Hook Galvanized Steel

A-10 P Hook Plated Steel

A-2 Q-Span Clamp Aluminum Clamp, Galvanized Steel Bolt

A-3 C-Span Clamp Aluminum Clamp, Galvanized Steel Bolt

A-22, A-22-12 4” Tap Bracket, 12” Tap Bracket Aluminum Bracket, Galvanized Bolt

Holland offers a variety of hardware for CATV and Satellite installations.

HARDWARE

A-2 A-3A-6 A-10 A-22

PASSIVES

HSU SERIES SPLITTERSMODELS HSU-2 : HSU-3 : HSU-4 : HSU-8

Wide Frequency Range

Heavy Duty Zinc Diecast Case

Anti-Corrosive Chromate Finish

Precision Machined Threads

DC Power Passing Through All Ports

Mounting Screws Included

FEATURES

The HSU splitter series has been manufactured to the

highest performance standards in its class, using the same

quality control standards and materials used in our

premium performance lines. Though intended for use with

home or MDU off-air systems in the 5-1000MHz range, the

HSU Series offer many features such as, machined

threads, and an epoxy sealed case.

ECONOMY BROADBAND SPLITTERS


CUSTOMER NOTES:DD

MODEL HSU-2 MODEL HSU-3 MODEL HSU-4 MODEL HSU-8

PASSIVES

HSU SERIES SPLITTERS


SPECIFICATIONS

88 |

POWER PASSING SPECIFICATIONS HSU-*

Voltage (Max) 30V

Current Rating (Max) 750mA

PARAMETER FREQUENCYRANGE (MHz)

HSU-2 HSU-3 HSU-4 HSU-8

Insertion Loss (dB) 5 - 15 4.5 4.0 / 8.5 8.0 10

16 - 40 4.0 3.5 / 7.5 7.2 10

41 - 450 3.6 3.7 / 7.3 7.2 11

451 - 750 3.7 3.8 / 7.8 7.9 12.2

751 - 1000 4.2 4.0 / 8.2 8.5 13

Isolation (dB) 5 - 15 15 25 16 20

16 - 40 17 25 17 20

41 - 450 23 23 20 22

451 - 750 25 21 17 22

751 - 1000 23 20 18 20

Return Loss (dB) 5 - 15 15 10 10 18

16 - 40 15 12 12 18

41 - 450 21 22 16 20

451 - 750 21 25 21 20

751 - 1000 20 20 15 18


PASSIVES

GHS/GSV SERIES DIGITAL CATV SPLITTERSMODELS GHS-2 : GHS-3 : GHS-4 : GHS-8 : GSV-2 : GSV-3 : GSV-4 : GSV-6 : GSV-8

Flat-End F-Ports

Enhanced Sub-Band Performance

Low Intermodulation Distortion

Capacitor Decoupled

6kV Survivability

Double-Thick Plating

130 dB RFI Shielding

3-Way Ground Screw: Hex/Phillips/Slot

FEATURES

The GHS and GSV Series 1 GHz Splitters are state-of-the-

art product lines designed and tested using the most cur-

rent procedures. New performance features have been

incorporated to make both series compatible with the latest

digital and return path requirements.

CATV DIGITAL SPLITTERS


MODEL GHS-2 MODEL GHS-3 MODEL GHS-4 MODEL GHS-8

MODEL GSV-2 MODEL GSV-3 MODEL GSV-4 MODEL GSV-6 MODEL GSV-8

CUSTOMER NOTES:DD

* POWER PASSING MODELS AVAILABLE. PLEASE SEE PAGE 101.

PASSIVES

GHS/GSV SERIES DIGITAL CATV SPLITTERS



GHS-2 GHS-3 GHS-3B GHS-4 GHS-8

Insertion Loss (dB) 5 - 15 3.5 3.6 3.7 / 6.9 3.8 / 7.0 5.6 5.8 7.0 7.1 10.7 11.2

16 - 40 3.6 3.7 3.7 / 6.9 3.8 / 7.0 5.6 5.8 6.8 6.9 10.5 11

41 - 450 3.7 3.8 3.7 / 7.0 3.8 / 7.0 6.2 6.5 7.0 7.1 11 11.5

451 - 750 3.8 3.9 3.9 / 7.5 4.0 / 7.6 6.3 6.5 7.5 7.6 12 12.5

751 - 1000 3.9 4.0 4.0 / 8.0 4.2 / 8.2 6.9 7 8.1 8.2 12 12.5

Isolation (dB) 5 - 15 26 25 30 22 25 20 30 22 24 20

16 - 40 45 40 38 35 38 35 40 32 28 25

41 - 450 31 30 30 25 28 25 30 25 28 25

451 - 750 31 30 28 25 25 23 28 25 23 20

751 - 1000 30 25 25 23 22 20 25 23 22 20

Input Return Loss (dB) 5 - 15 25 24 25 20 22 20 25 20 24 20

16 - 40 26 25 28 24 25 22 28 24 26 22

41 - 450 26 25 28 23 25 22 28 23 24 20

451 - 750 26 25 28 20 23 20 25 20 23 20

751 - 1000 25 22 24 20 22 20 21 20 22 20

Output Return Loss (dB) 5 - 15 26 24 25 22 24 20 25 20 24 20

16 - 40 35 30 35 30 32 28 30 28 27 24

41 - 450 26 25 30 23 25 22 28 23 25 21

451 - 750 26 25 25 20 22 20 25 20 24 20

751 - 1000 25 22 24 20 22 20 21 20 23 20

SPECIFICATIONS

TYP. QC. TYP. QC. TYP. QC. TYP. QC. TYP. QC.


GSV-2 GSV-3 GSV-4 GSV-6 GSV-8

Insertion Loss (dB) 5 - 15 3.3 3.5 3.5 / 6.8 3.6 / 6.9 6.8 6.9 9.1 9.2 10 10.5

16 - 40 3.3 3.5 3.5 / 6.9 3.6 / 7.0 6.9 7.0 9.1 9.2 10.3 10.8

41 - 450 3.6 3.8 3.8 / 7.4 3.9 / 7.5 7.4 7.5 9.9 10 11 11.5

451 - 750 3.9 4.2 4 / 8 4.1 / 8.1 8 8 10.5 11 11.7 12.2

751 - 1000 4 4.4 4 / 8 4.2 / 8.2 8.1 8.2 11.3 11.5 12.2 12.5

Isolation (dB) 5 - 15 26 20 35 23 29 24 24 23 30 25

16 - 40 33 25 38 25 29 25 25 24 30 24

41 - 450 35 22 36 22 30 25 23 22 25 22

451 - 750 32 20 30 22 28 24 22 20 23 21

751 - 1000 28 20 25 20 27 24 21 20 22 20


16 - 40 27 22 23 21 24 20 21 20 25 22

41 - 450 23 20 23 20 25 21 21 20 24 20

451 - 750 24 18 22 20 22 18 20 18 23 19

751 - 1000 24 18 21 18 21 18 19 18 22 18


16 - 40 28 22 32 20 25 22 21 20 28 22

41 - 450 31 20 26 20 28 25 21 20 24 20

451 - 750 30 20 22 18 23 18 20 18 23 19

751 - 1000 25 20 20 18 21 18 19 18 22 18


PASSIVES

GHS-*FC LI SERIES DIGITAL CATV SPLITTERSMODELS GHS-2FC LI : GHS-3FC LI : GHS-4FC LI : GHS-8FC LI

Low Intermodulation Distortion(Patent Pending)

Non-Magnetizing Ferrite Design(Patent Pending)

Pressure Sealed F-Ports to 30 PSI

Flat-end, Small Aperture F-Ports with

1” Spacing

U.L. Listed: Ground Block (Optional Model)

Capacitor Decoupling on All Ports

6kV Survivability

Enhanced Return Loss & Isolation

Heavy Duty Zinc Rear Cover

FEATURES

The GHS-FCLI Series splitters are premium digital splitters

featuring low intermod distortion and non-magnetizing

circuit design (patents pending). The low intermod

distortion allows high level return path signals (cable

modems, STB’s, etc.) while maintaining product integrity

and eliminating the possibility of harmonics due to

magnetization. Also features sealed F-ports which protect

splitter circuitry from varying environmental conditions.

Zinc back cover ensures maximum outdoor survivability.

PREMIUM DIGITAL SPLITTERS


CUSTOMER NOTES:DD

MODEL GHS-2FC LI MODEL GHS-3FC LI MODEL GHS-4FC LI MODEL GHS-8FC LI

PASSIVES

GHS-FC LI SERIES CATV SPLITTERS


SPECIFICATIONS


GHS-2FC LI GHS-3FC LI GHS-3BFC LI GHS-4FC LI GHS-8FC LI

Insertion Loss (dB) 5 - 15 3.3 3.4 3.4 / 7.0 3.5 / 7.1 5.6 6.0 7.4 7.7 10.7 11.0

16 - 40 3.4 3.5 3.5 / 7.2 3.6 / 7.3 5.5 6.0 7.1 7.3 10.5 10.8

41 - 450 3.8 3.9 3.6 / 7.4 3.8 / 7.5 5.7 6.5 7.2 7.3 10.7 11.0

451 - 750 3.8 3.9 3.7 / 7.4 4.0 / 8.0 5.9 6.8 7.3 8.0 10.9 11.5

751 - 1000 3.8 3.9 3.9 / 7.9 4.0 / 8.0 6.5 7.1 7.5 8.0 11.4 12.2

Isolation (dB) 5 - 15 23 22 23 22 28 22 30 22 32 25

16 - 40 41 40 36 35 36 30 40 35 38 32

41 - 450 35 30 36 30 30 25 30 25 30 25

451 - 750 28 25 31 25 28 22 29 25 28 24

751 - 1000 26 25 26 25 25 20 28 25 25 20


16 - 40 26 25 25 24 28 24 28 24 30 25

41 - 450 28 25 24 23 26 22 28 23 28 23

451 - 750 25 22 23 22 25 22 27 20 25 20

751 - 1000 23 22 23 22 23 20 25 20 25 20


16 - 40 31 30 31 30 32 28 35 30 32 25

41 - 450 28 25 29 23 28 23 28 23 28 23

451 - 750 25 22 24 22 25 22 26 22 25 20

751 - 1000 23 22 23 22 24 20 22 20 23 20

GENERAL

Temperature Range -40° to 60° Celsius -40° to 60° Celsius -40° to 60° Celsius -40° to 60° Celsius -40° to 60° Celsius -40° to 60° Celsius

Port Spacing 1” 1” 1” 1” 1” 1”

RFI >130 dB >130 dB >130 dB >130 dB >130 dB >130 dB

Impedance (Ohm) 75 75 75 75 75 75

Blocking Capacitors Yes Yes Yes Yes Yes Yes



PASSIVES

SATELLITE / BROADBAND SPLITTERSMODELS HFS-2 : HFS-2P : HFS-4 : HFS-4P


SATELLITE/BROADBAND SPLITTERS (DIODE STEERED)MODELS HFS-2D : HFS-3D : HFS-4D

5 - 2150 MHz Performance

Power Passing to One or All Ports

High Port-to-Port Isolation

FEATURES

15 - 2150 MHz Wideband Operation

High Return Loss

Flat Frequency Response

Flat End F Ports with 1” Spacing

Solder Back Case (-130 dB RFI Shielding)

FEATURES

The HFS Series broadband splitters are an advanced design

providing the lowest insertion loss from 5-2150 MHz while

maintaining high isolation. The HFS-2/HFS-4 are power

passing to one port, and the HFS-2P/HFS-4P pass power to all

ports.

Hollands HFS-*D series high frequency splitters have been

designed for residential and commercial applications. The

diode protected circuitry allows the DC power to pass from

any output port to the input port and prevents DC backfeeding.

MODEL HFS-2 MODEL HFS-2P

MODEL HFS-2D MODEL HFS-3D MODEL HFS-4D

MODEL HFS-4 MODEL HFS-4P

PASSIVES

SATELLITE/BROADBAND SPLITTERS


SPECIFICATIONS

94 |

PARAMETER FREQUENCYRANGE (MHz) HFS-2/2P HFS-4/4P HFS-2D HFS-3D HFS-4D

Insertion Loss (dB) 15 - 40 4.4 4.5 7.8 8.0 4.3 4.5 4.2 / 8.3 4.5 / 8.5 8.2 8.5

41 - 550 4.3 4.5 7.8 8.0 4.2 4.5 4.5 / 9.2 4.8 / 9.3 9.0 9.3

551 - 950 4.4 4.7 8.0 8.2 4.3 4.7 4.7 / 9.4 5.0 / 9.5 9.2 9.5

951 - 1450 4.8 5.0 9.0 9.5 5.2 5.3 5.3 / 10.5 5.5 / 10.8 10.5 10.8

1451 - 2150 5.0 5.3 10 10.5 5.3 5.5 5.5 / 10.9 5.9 / 11.5 10.9 11.2

Isolation (dB) 15 - 40 20 18 24 23 25 22 24 23 27 25

41 - 550 23 19 22 21 27 25 23 22 22 21

551 - 950 23 19 21 20 26 24 23 22 22 21

951 - 1450 24 20 21 20 22 21 22 21 22 21

1451 - 2150 24 20 21 20 22 21 22 21 22 20


41 - 550 11 8 11 8 16 15 16 15 16 15

551 - 950 11 8 11 8 16 15 16 15 16 15

951 - 1450 11 8 11 8 16 15 16 15 16 15

1451 - 2150 11 8 11 8 16 15 16 15 16 15


41 - 550 11 8 11 8 20 15 16 15 16 15

551 - 950 11 8 11 8 19 15 16 15 16 15

951 - 1450 11 8 11 8 18 15 16 15 16 15

1451 - 2150 11 8 11 8 17 15 16 15 16 15

GENERAL

Temperature Range -40° to 60° Celsius -40° to 60° Celsius -40° to 60° Celsius -40° to 60° Celsius -40° to 60° Celsius -40° to 60° Celsius

Port Spacing 1” 1” 1” 1” 1” 1”

RFI >130 dB >130 dB >130 dB >130 dB >130 dB >130 dB

Impedance (Ohm) 75 75 75 75 75 75


POWER PASSING SPECIFICATIONS HFS-*/*P HFS-*D

Voltage (Max.) 35V 35V

Current Rating (Max.) 750 mA 1.0 A


PASSIVES

DCG SERIES 1 GHz DIRECTIONAL COUPLERSMODELS DCG-* : DCWG-* : DCG2-* : DCG4-*

1 GHz Bandwidth

90 dB RFI Shielding

Heavy Duty Diecast Case

High Downstream Isolation (Tap-Out)

Low Insertion Loss


FEATURES

The DCG line of high quality directional couplers have been

developed for indoor or outdoor applications requiring high

isolation. Numerous values and port configurations

available to facilitate proper distribution system design.


CUSTOMER NOTES:DD

MODEL DCG-* MODEL DCWG-* MODEL DCG2-* MODEL DCG4-*

DCG SERIES DIRECTIONAL COUPLERS

PASSIVES

DCG SERIES 1 GHz DIRECTIONAL COUPLERS


1 PORT MODELS (DCG-*)

* TAP VALUE 6 9 12 16 20 24 27 30

Insertion Loss (dB) (In - Out)

5 - 47 2 1.5 1 .8 .8 .7 .7 .7

48 - 450 2 1.5 1 .8 .8 .6 .6 .6

451 - 750 2.3 1.6 1.3 1 1 .8 .8 .8

751 - 1000 2.5 2 1.5 1.2 1.2 1 1 1

Isolation (dB) (Out - Tap)

5 - 47 25 30 30 35 40 40 40 41

48 - 450 25 25 28 30 35 40 40 40

451 - 750 22 24 25 28 30 35 35 40

751 - 1000 22 22 22 23 25 30 35 36

2 PORT MODELS (DCG2-*)

* TAP VALUE 9 12 16 20 24 27 30


5 - 47 3.5 1.9 1.5 .7 .7 .7 .7

48 - 450 3.4 1.5 1.3 .6 .6 .6 .6

451 - 750 3.6 2 1.5 .8 .8 .8 .8

751 - 1000 4 2.2 1.7 1 1 1 1


5 - 47 25 35 35 40 45 45 45

48 - 450 25 25 30 35 40 40 40

451 - 750 22 24 28 30 35 35 35

751 - 1000 22 22 23 27 30 30 30

4 PORT MODELS (DCG4-*)

* TAP VALUE 8 12 16 20 24 30


5 - 47 Self Term. 3.7 1.4 .9 .9 .9

48 - 450 Self Term. 3.9 1.3 .8 .8 .8

451 - 750 Self Term. 4 1.7 .9 .9 .9

751 - 1000 Self Term. 4.1 1.9 1.1 1.1 1.1


5 - 47 Self Term. 27 30 32 40 45

48 - 450 Self Term. 27 28 30 35 40

451 - 750 Self Term. 22 26 28 30 37

751 - 1000 Self Term. 21 23 25 29 34

GENERAL 5 - 47 (MHZ) 48 - 450 (MHZ) 451 - 750 (MHZ) 751 - 1000 (MHZ)

Input Return Loss (dB) 18 20 20 18

Output Return Loss (dB) 18 20 20 18

Tap Return Loss (dB) 20 20 20 20


PASSIVES

DCG-*SB SERIES DIRECTIONAL COUPLERSMODELS DCG-*SB : DCWG-*SB : DCG2-*SB : DCG4-*SB

1 GHz Bandwidth

130 dB RFI Shielding (Solderback)

PCB Design

High Downstream Isolation (Tap-Out)

High Return Loss


FEATURES

The DCG-SB Series of high quality directional couplers

have been developed to support the latest advancements

in distribution requirements. High return loss and low inser-

tion loss make the DCG-SB Series ideal for any application.

Advanced PCB design assures consistent performance.

DCG-*SB SERIESHIGH PERFORMANCE DIRECTIONAL COUPLERS


CUSTOMER NOTES:DD

MODEL DCG-*SB MODEL DCWG-*SB MODEL DCG2-*SB MODEL DCG4-*SB

PASSIVES

DCG-*SB SPECIFICATIONS


1 PORT MODELS (DCG-*SB)

* TAP VALUE 6 9 12 16 20 24 27 30


5 - 47 2 1.5 1 .8 .8 .7 .7 .7

48 - 450 2 1.5 1 .8 .8 .6 .6 .6

451 - 750 2.3 1.6 1.3 1 1 .8 .8 .8

751 - 1000 2.5 2 1.5 1.2 1.2 1 1 1


5 - 47 25 30 30 35 40 40 40 41

48 - 450 25 25 28 30 35 40 40 40

451 - 750 22 24 25 28 30 35 35 40

751 - 1000 22 22 22 23 25 30 35 36

GENERAL 5 - 47 MHZ 48 - 450 MHZ 451 - 750 MHZ 751 - 1000 MHZ




2 PORT MODELS (DCG2-*SB)

* TAP VALUE 9 12 16 20 24 27 30


5 - 47 3.5 1.9 1.5 .7 .7 .7 .7

48 - 450 3.4 1.5 1.3 .6 .6 .6 .6

451 - 750 3.6 2 1.5 .8 .8 .8 .8

751 - 1000 4 2.2 1.7 1 1 1 1


5 - 47 25 35 35 40 45 45 45

48 - 450 25 25 30 35 40 40 40

451 - 750 22 24 28 30 35 35 35

751 - 1000 22 22 23 27 30 30 30

4 PORT MODELS (DCG4-*SB)

* TAP VALUE 8 12 16 20 24 30


5 - 47 Self Term. 3.7 1.4 .9 .9 .9

48 - 450 Self Term. 3.9 1.3 .8 .8 .8

451 - 750 Self Term. 4 1.7 .9 .9 .9

751 - 1000 Self Term. 4.1 1.9 1.1 1.1 1.1


5 - 47 Self Term. 27 30 32 40 45

48 - 450 Self Term. 27 28 30 35 40

451 - 750 Self Term. 22 26 28 30 37

751 - 1000 Self Term. 21 23 25 29 34


PASSIVES

HIGH PERFORMANCE SATELLITE PASSIVESHR S SERIES : HRV S SERIES : HR T** SERIES : HRV T1** SERIES : HR TW* SERIES

Wideband Operation (15 MHz to 2150 MHz)

High Return Loss (15 dB @ 2 GHz Typical)

Frequency-Flat Response (±0.1 dB in any 24 MHz)

Flat “F” Ports with 1” Spacing

Solder Back Case (130 dB RFI Shielding)

FEATURES

Hollands high performance passives are designed for

distribution of digital satellite signals in applications where

signal integrity is critical. The HRS and HR VS Series split-

ters utilize diode protected circuitry to prevent DC back-

feeding.

“3 SIGMA PERFORMANCE”


CUSTOMER NOTES:DD

HR S2

HRV S2

HR T1** HRV T1** HR TW*

HR S3 HR S4 HR S8

HRV S4HRV S8

PASSIVES

HIGH PERFORMANCE SATELLITE PASSIVES


SPECIFICATIONS - HR S* SPLITTERS

100 |

PARAMETER INSERTION LOSS (DB)

(15 - 950 MHz)INSERTION LOSS (DB)

(950 - 2150 MHz)RETURN LOSS (DB)

(15 - 950 MHz)RETURN LOSS (DB)

(950 - 2150 MHz)

HR S2 4.2 5.4 18 16

HR S2P 4.2 5.4 18 16

HRV S2 4.2 5.4 17 15

HR S3 (unbalanced) 4.6 / 8.4 10.8 17 15

HRV S3 (unbalanced) 4.6 / 8.4 10.8 17 15

HR S4 7.8 9.5 17 15

HRV S4 8.4 10.2 17 15

HRV S6 (unbalanced) 7.8 / 11.5 12.5 17 15

HR S8 13.2 17 17 15

HRV S8 13.2 17 17 15

GENERAL

Port Spacing 1”

Voltage (Max.) 35 V

Current Rating (Max.) 1A

POWER PASSING SPECIFICATIONS

Voltage (Max.) 35V

Current Rating (Max.) 1A

DC Passing DC Passing In/Out, DC Blocking Tap/In

PARAMETER INSERTION LOSS(15 - 950 MHz)

INSERTION LOSS(950 - 2150 MHz)

RETURN LOSS(15 - 950 MHz)

RETURN LOSS(950 - 2150 MHz)

HR T106 2.5 dB 3.3 dB 16 dB 17 dB

HR TW6 2.5 dB 3.3 dB 22 dB 22 dB

HRV T106 2.5 dB 3 dB 16 dB 17 dB

HR T108 1.9 dB 2.7 dB 17 dB 18 dB

HR TW9 1.9 dB 2.1 dB 18 dB 19 dB

HRV T109 1.8 dB 2 dB 18 dB 19 dB

HR T112 1.6 dB 1.9 dB 16 dB 17 dB

HR TW12 1.6 dB 1.9 dB 19 dB 20 dB

HRV T112 1.6 dB 1.9 dB 19 dB 20 dB

HR T116 1.5 dB 1.9 dB 17 dB 18 dB

HR TW16 1.5 dB 1.9 dB 18 dB 20 dB

HRV T116 1.5 dB 1.7 dB 18 dB 20 dB

SPECIFICATIONS - HR T* DIRECTIONAL COUPLERS


PASSIVES

SPECIALTY SPLITTERSMODELS GHS-2P : GHS-3P : GHS-4P

1 GHz Operation

Low Intermodulation Distortion

High Voltage / Current Capability

FEATURES

The GHS-*P Series power passing to one port splitters

have been specifically designed to meet the highest

electrical specifications. Careful isolation of the RF and DC

path is required to prevent saturation or burn-out of the

high permeability ferrite core. This has been accomplished

using a separate DC bypass core material which can with-

stand higher impulse spikes before saturating.

SPECIALTY DC/AC POWER PASSING TO ONEPORT SPLITTERS


CUSTOMER NOTES:DD

CATV Input

Ideal For House Drop Amplifiers

Diplexed DCDC & RF

DC Insertion

DROP AMPLIFIER

GHS-3P

TV

TV

MODEL GHS-2P MODEL GHS-3P MODEL GHS-4P

PASSIVES

SPECIALTY SPLITTERS


SPECIFICATIONS

102 |


GHS-2P GHS-3P GHS-4P

Insertion Loss (dB) 5 - 47 3.7 3.8 3.8 / 7 3.9 / 7.1 7.1 7.2

48 - 450 3.7 3.8 3.8 / 7 3.9 / 7.1 6.9 7

451 - 750 3.9 4 3.8 / 7.1 3.9 / 7.1 7.1 7.2

751 - 1000 4 4.1 4 / 7.6 4.1 / 7.7 7.6 7.7

Isolation (dB) 5 - 47 21 20 22 20 22 20

48 - 450 23 22 26 24 26 24

451 - 750 23 22 25 22 25 23

751 - 1000 21 20 22 20 22 20

Input Return Loss (dB) 5 - 47 22 20 22 20 20 21

48 - 450 24 22 25 23 26 23

451 - 750 24 22 24 22 24 22

751 - 1000 21 20 22 20 22 20

Output Return Loss (dB) 5 - 47 22 21 23 21 23 21

48 - 450 28 25 28 25 28 26

451 - 750 25 23 25 23 25 23

751 - 1000 21 20 23 21 23 21

TYP. QC. TYP. QC. TYP. QC.

TYP. MIN. TYP. MIN. TYP. MIN.

SPECIAL CASE 2-WAY SPLITTERS

POWER INSERTERS

POWER PASSING SPECIFICATIONS GHS-*P

Voltage (Max.) 30V

Current Rating (Max.) 750mA

MODEL HCDA-PIF TYPE PI, 1 GHz

MODEL HRF PIF TYPE PI, 2300 MHz,

SINGLE LEG DC

MODEL HRF PIBF TYPE PI, 2300 MHz,

BOTH LEGS DC

MODEL HR PIF TYPE PI, 2150 MHz,

SINGLE LEG DC

The HR PI is designed to power satellite applications.

MODEL GHS-2TLSIDE PORT INPUT, MINI CASE

MODEL MS-2DWALL PLATE MOUNT

MODEL GDS-2VT-TYPE


PASSIVES

GHT SERIES HARD-LINE MULTI TAPSMODEL GHT2-* : GHT4-* : GHT8-*

Interchangeable Covers & Circuitry

(2&4 Port)

Corrosion Resistant 360 Aluminum Case

Neoprene Weather Sealed Cover

Plastic Component Covers for Additional

Protection of Circuitry During Handling

Weather Resistant Baked-On Epoxy Finish

Captive Stainless Steel Hardware

Maximum RFI Integrity

Brass, Neoprene Sealed F-Ports

FEATURES

Hollands hard-line multi taps provide excellent

bi-directional compatibility, low insertion loss, and high

port-to-port isolation. Designed for compatibility with 30,

60, and 90 VAC systems, with current capacity up to 15A.

The 15 psi weatherproof seal , epoxy finish, and neoprene

sealed covers provide outstanding environmental

protection. Available in a variety of configurations to suit

your application needs.

HARD LINE MULTI TAPS

2935 Golf Course Drive Ventura, CA 93003 (800) 628-4511 FAX (805) 339-0230 www.hollandelectronics.com| 103

CUSTOMER NOTES:DD

MODEL GHT2-* MODEL GHT4-* MODEL GHT8-*

NOTE: Power Passing Models Available (P Series)

PASSIVES

GHT SERIES HARD-LINE MULTI TAPS


FREQUENCY(MHz) 5 - 47 48 - 450 451 - 750 751 - 1000 5 - 47 48 - 450 451 - 750 751 - 1000

2-PORT TAPS (GHT2-*)

GHT2-8 4 4.4 5 5.6 18 22 20 18

GHT2-11 2.3 2.3 2.8 4 18 25 23 18

GHT2-14 1.4 1.4 1.9 2.7 20 23 20 18

GHT2-17 1.5 1.6 1.9 2.4 27 30 30 25

GHT2-20 1.1 1.1 1.5 1.8 30 30 27 23

GHT2-23 1 1 1.5 1.8 30 33 28 27

GHT2-26 1 1 1.5 1.8 34 34 26 25

GHT2-29 1 1 1.5 1.8 36 42 30 27

GHT2-32 1 1 1.5 1.8 38 42 32 31


GHT4-8 (Self Terminating) - - - - - - - -

GHT4-11 4 4.4 5.1 5.6 18 24 22 18

GHT4-14 2 2 2.9 4 20 25 20 20

GHT4-17 1.5 1.4 2.5 3.1 22 20 19 18

GHT4-20 1.3 1.2 2 2.2 27 33 31 28

GHT4-23 1 1 1.6 2 30 36 32 25

GHT4-26 .9 .9 1.6 2 34 34 30 25

GHT4-29 .9 .9 1.6 2 36 40 30 27

GHT4-32 .9 .9 1.6 2 38 40 30 27


GHT8-11 (Self Terminating) - - - - - - - -

GHT8-14 4 4.4 5.1 5.6 20 22 20 18

GHT8-17 2.2 2.4 3.1 3.5 20 20 19 18

GHT8-20 1.7 1.9 2.2 3.1 25 20 19 18

GHT8-23 1.5 1.5 1.7 2.2 34 32 30 28

GHT8-26 1.2 1.3 1.6 1.8 34 32 30 27

GHT8-29 1 1.3 1.6 1.8 37 32 28 26

GHT8-32 1 1.2 1.8 1.8 39 34 33 27

SPECIFICATIONS

OUT-TAP ISOLATION (dB) (Min.)INSERTION LOSS (dB) (Max.)

NOTE: Power Passing Models Available (P Series)

GENERAL 5 - 47 MHZ 48 - 450 MHZ 451 - 750 MHZ 751 - 1000 MHZ





PASSIVES

GH SERIES HARD-LINE PASSIVESMODELS GHDC-* : GHLS-* : GHP-1

1 GHz Performance

Fused Outputs for Power Direction

Epoxy Coated Aluminum Housing

Neoprene Weather Sealing

Tongue & Groove Faceplate

Stainless Steel Mounting Hardware

Directional Coupler Available in 8,12

and 16 dB

Captive Hardware

FEATURES

The Holland hard-line passives are high performance

products manufactured for over eighteen years to the

highest quality standards. Power compatibility with 30, 60,

and 90 VAC systems with a current capacity up to 15A make

them ideal for most CATV applications. Our hard-line

passives feature high return loss and low insertion loss

providing excellent bi-directional compatibility. Neoprene

sealing, epoxy coating, and pressure sealed F-ports

provide excellent durability in any environment.

HARD-LINE PASSIVES


CUSTOMER NOTES:DD

MODEL GHDC-* MODEL GHLS-2 MODEL GHLS-3 MODEL GHP-1

PASSIVES

GH SERIES HARD-LINE PASSIVES


PARAMETER FREQUENCYRANGE (MHz) GHDC-8 GHDC-12 GHDC-16 GHLS-2 GHLS-3B GHLS-3 GHP-1

Tap Loss (dB) 5 - 40 8 ± 1.5 11 ± 1.5 15 ± 1.5 - - - -

41 - 750 8 ± 1.5 12 ± 1.5 16 ± 1.5 - - - -

751 - 1000 8 ± 1.5 12 ± 1.5 16 ± 1.5 - - - -

Insertion Loss (dB) (In/Out) 5 - 15 2.1 1.2 1 4 6.5 4.4 / 7.4 .8

16 - 40 2.1 1.2 1 4.4 6.3 4.3 / 7.4 .8

41 -250 2.1 1.2 1.2 4.6 6.3 4.3 / 7.5 .8

251 - 550 2.1 1.4 1.2 5 6.5 4.3 / 7.5 .8

551 - 750 2.1 1.4 1.2 5.2 6.8 4.3 / 7.8 .8

751 - 1000 3 2 1.6 5.5 7.8 5.2 / 8.8 1.2

Isolation (dB) (Out/Tap) 5 - 15 18 20 20 - - - -

16 - 40 25 28 28 - - - -

41 - 250 25 28 28 - - - -

251 - 450 25 28 28 - - - -

451 - 550 25 28 28 - - - -

551 - 750 22 22 22 - - - -

751 - 860 20 20 20 - - - -

861 - 1000 20 20 20 - - - -

Isolation (dB) (Out/Out) 5 - 15 - - - 18 20 20 65

16 - 40 - - - 28 24 28 70

41 - 250 - - - 28 24 28 70

251 - 550 - - - 28 24 28 65

551 - 750 -- - - 25 24 25 65

751 - 1000 - - - 22 22 22 60

Return Loss (dB) (All Ports) 5 - 15 16 16 16 16 16 16 16

16 - 40 17 17 17 17 17 17 17

41 - 250 17 17 17 17 17 17 17

251 - 550 17 17 17 17 17 17 17

551 - 750 17 17 17 17 17 17 17

751 - 1000 16 16 16 16 16 16 16

GENERAL

Impedance (Ohm) 75

Connector (In/Out/Tap) 5/8” - 24 UNEF Female

Waterproof Condition 15 PSI

Power Passing 15A 30/60/90 VAC

Dimensions 120mm L x 100mm W x 70mm H

SPECIFICATIONS


SATELLITE

DIPLEXERSMODELS STVC : DPD2 : HR D2 : HR D3 : DP54


SATELLITE/TV DIPLEXER

MODEL STVC

MODEL DP 54

MODEL HR D2 MODEL HR D3


MODEL DPD2

The STVC allows the combining or separating of off-air and CATV signals with satellitesignals to a common cable.


The DP 54 diplexer combines terrestrial signals, or basic cable and

data modem signals, to each of the four DP34 outputs. Allows data

modem subscribers to connect their computer using the same coax

providing DBS service.

“3 SIGMA” HIGH PERFORMANCE DIPLEXERS

Allows the combining (or separating if used in the reverse ) of Off-Air / CATV signals withsatellite signals to a common cable. Separates TV and satellite signals prior to satellitereceiver input and filters harmonics in the off-air spectrum from satellite conversiondevices. The DPD2 diplexer is specifically designed for Dish Network’sTM DP44 installa-tions, requiring continuous 2 amp power passing.

Hollands “3 Sigma” diplexers are specifically designed to work in MDU applications where high return loss and high

isolation are critical for proper system function. The HR D2 is intended for subscriber satellite drops. The HR D3’s

additional isolation make it an ideal choice as a trunk-grade diplexer. Solderback sealed.

* Please see page 51 for additional details.


Wideband Operation (15 MHz - 2150 MHz)

Higher Return Loss (15 dB @ 2 GHz Typical)

Ultra-Flat Response (±0.1 in any 24 MHz)

Flat “F” Ports

SATELLITE


PASSIVESMODELS HFS-* : HFS-*P : HFS-*D : HR S* : HR T* : HRV T* : HR TW*

FEATURES

Our HR S* Series diode steered splitters offer 130 RFI shielding. Features include solder back housing and our

patented round-pin design for improved connectivity.





MODEL HFS-2 MODEL HFS-2P MODEL HFS-4PMODEL HFS-4

MODEL HFS-2D MODEL HFS-3D MODEL HFS-4D

The HFS Series broadband splitters are an advanced design providing the lowest insertion loss from 5-2150 MHz

while maintaining high isolation. The HFS-2/HFS-4 are power passing to one port, and the HFS-2P/HFS-4P pass power

to all ports.

MODEL HR TW*MODEL HRV T*MODEL HR T*

HFS SERIES HIGH FREQUENCY BROADBAND SPLITTERS

HFS-*D SERIES: HIGH FREQUENCY BROADBAND SPLITTERS

MODEL HR S2 MODEL HR S3 MODEL HR S4 MODEL HR S8

HR S SERIES

HIGH PERFORMANCE TAPS

Holland’s “3 Sigma” taps are designed for MDU applications where high return loss and high isolation are required.

Hollands HFS-*D series high frequency splitters have been designed for residential and commercial applications. The

diode protected circuitry allows the DC power to pass from any output port to the input port and prevents DC back-

feeding.

SATELLITE

SATELLITE MULTISWITCHESMODELS HMS-4A : HMS-8A : SAM-3402 : HMS-54* : HMS-58*


MODEL HMS-4A

MODEL HMS-8A

MODEL HMS-58B, C

MULTI SATELLITE MULTISWITCHES (HDTV)

The professional series multi satellite multiswitches have been specifically designed for both high-end home

installations and MDU’s requiring high performance and reliability. These switches are ideal for use in multi satellite

dish installs. CATV/Off-Air input ports are standard on all HMS series multiswitches. The HMS-58C provides 22 kHz

tone switching allowing switches to be cascaded.

MODEL HMS-54B

* The HMS-58C model includes transformer to power switch and LNB.

NOTE: Please See Page 73 for our rackmounted multiswitches (MODELS HMS-16APR & HMS-412ARK)

MODEL SAM-3402

High Isolation

Non-Amplified Terrestrial Input

Receiver Line Powered

Amplified Terrestrial and Satellite Inputs

Holland Electronic’s multiswitches are designed for the independent operation of four to eight satellite receivers. In

addition they provide terrestrial VHF/UHF signal diplexing when required. Compact size of the SAM-3402 allows place-

ment where larger switches won’t fit.

* Please see reverse side for specifications.

SATELLITE

SATELLITE MULTISWITCHES


INPUTS OUTPUTS GAIN/LOSS

MODEL SATELLITE TERRESTRIAL SATELLITE TERRESTRIAL 22 kHZ TONE POWER

HMS-4A 2 1 4 -2 -10 NO SAT. LINE ONLY

HMS-8A 2 1 8 -4 -3 NO SAT. LINE OR PS**

SAM-3402 2 1 4 – – NO SAT. LINE ONLY

HMS-54B 4 1 4 0 -3 PASSES SAT. LINE ONLY

HMS-58B 4 1 8 0 -3 PASSES SAT. LINE ONLY

HMS-58C 4 1 8 0 -3 YES PS INCLUDED

SPECIFICATIONS

MODEL HR PID1422

POLARITY LOCKER

Designed to power a DirectTV™ AT9 dish. Locks the four LNB

outputs for splitting to multiswitches. Also increases DC line

voltage for longer cable runs. Ideal for use on MDU trunk lines.

POLARITY LOCKER TYP. MIN.

Insertion Loss .5 dB 1 dB

Return Loss 12 dB 10 dB

Input Transformer 24 VDC, 1 A

Inputs / Outputs 950 - 2400 MHz

COLOR CODE

13v.............101° ODD RHCP, 99° Ka Lo, 99° Ka Hi

18v.............101° Even LHCP, 99° Ka Lo, 99° Ka Hi

13v 22kHz..119° Odd RHCP, 103° Ka Lo, 103° Ka Hi

18v 22kHz..110°/119° Odd LHCP, 103° Ka Lo, 103° Ka Hi

To DirecTV™ Receivers

TYPICAL APPLICATION

** The HMS-8A may use optional HMS-PS.


SATELLITE

SATELLITE STACKERS & DESTACKERSMODELS US575-T : D575 : D575D : DMUX35


MODEL US575-T

SATELLITE STACKER

SATELLITE DESTACKERS

The US575-T is a frequency up-converter that places both transponder polarities onto a single coax output. This

reduces the number of coax cables required from the dish to the distribution point.

MODEL D575 MODEL D575D MODEL DMUX35

Destackers are frequency down converters that take stacked DBS signals and separates them to 13/18 V switch for-

mat when needed. Contact us for help in selecting an appropriate model for your application.

US575-T

RF Input Frequency (2) 950 - 1450 MHz

RF Output 950 - 2150 MHz

DBS Input Window -32 to -42 dBm

Insertion Loss 6 dB (odd, 950 - 1450 MHz)3 dB (even, 1550 - 2050 MHz)

High Return Loss 12 dB input, 12 dB output

LNB Power 18VDC @ 300 mA

D575 D575D DMUX35

INSERTION LOSS (dB) TYP. MIN. TYP. MIN. TYP. MIN.

5 - 550 MHz -1 -2 -1 -2 -

5 - 806 MHz - - .5 1.5

806 MHz -6 -9 -6 -9 -

950 - 1450 MHz 2 ±2 2 ±2 6 ±1

1525 - 2025 MHz 8 ±2 8 ±2 5 ±2

INPUT RETURN LOSS (dB)

5 - 550 MHz 13 12 13 12 -

5 - 750 MHz - - 15 12

750 - 806 MHz 8 6 8 6 -

950 - 2025 MHz 12 10 12 10 12 10

OUTPUT RETURN LOSS (dB)

5 - 750 MHz - - 12 10

5 - 806 MHz 13 11 13 11 -

950 - 1450 MHz 10 9 10 9 12 10

GENERAL

Operating Voltage 11 to 18VDC 11 to 18VDC 11 to 18VDC

DBS Input Window -35 to -58 dBm -35 to -58 dBm -37 to -57 dBm

* Power passing model available. NOTE: All specifications typical unless otherwise noted

SATELLITE


SATELLITE DISTRIBUTION SYSTEMS

SATELLITE DISTRIBUTION SYSTEMS

Holland Electronics offers a variety of satellite distribution systems

specifically designed for MDU and large home applications. With multiple

input/output configurations, auto gain control amplifiers, HDTV

capabilities, and integrated sub-band returns for data applications,

Holland Electronics has a system to meet your specific needs. All

distribution hubs and routers are 100% bench tested ensuring worry-free

plug and play installation.

DirecTV™ and Dish Network™ Compatible

HDTV Ready

Supports kA Bands

High Output Capabilities for Long Cable Runs

* Please Contact a Holland sales representative for help in selecting a system for your specific needs.

DISH NETWORK™ EXAMPLE DIRECTV™ EXAMPLE

TELEPHONE/DATA PRODUCTS

TELEPHONE/DATA ACCESSORIESMODELS TFW-* : DAM-* : DAF-* : TMS-* : TMP-* : TMC-* : TSM-4


STATION WIRE

The Holland telephone station wire is a durable high grade round (twisted pair), or flat silver satin communications wire.

DUPLEX ADAPTERS

MODULAR COUPLERS/MODULAR PLUGS

MODULAR CORD SETSFlat silver satin wire #26 AWG.

MODEL GAUGE CONDUCTORS WIRE TYPE

TFW-428 28 4 FLAT

TFW-424 24 4 ROUND

TFW-624 24 6 ROUND

MODEL CONDUCTORS

DAM-4 4

DAM-8 8

MODEL CONDUCTORS

TMS-4 4

TMS-8 8

MODEL CONDUCTORS CABLE

TMP-4 4 FLAT

TMP-8 8 ROUND

MODEL CONDUCTORS

DAF-4 4

DAF-8 8

MODEL CONDUCTORS LENGTH

TMC-47 4 7 ‘

TMC-415 4 15 ‘

TMC-425 4 25 ‘

TMC-450 4 50 ‘

MODEL TFW-*

MODEL DAM-*1 Male - 2 Female

MODEL DAF-*All Female

MODEL TMS-* MODEL TMP-*

MODEL TMC-*

Made of ABS plastic with 6 micron gold-plated contacts. Available in ivory.

SURFACE JACK

MODEL TSM-4

TEST EQUIPMENT


TEST EQUIPMENTMODELS SF-95-22 : TSTL-1 : TSTL-3A : TSTL-3AKIT : PFT : PFT-A : PFTK

FEATURES

SATELLITE FINDER

Holland’s satellite finder installs in-line between the receiver and

dish for precise satellite alignment. Features audio tone and a 50 dB

input range.

PREMIUM CABLE RINGER

CABLE RINGER TEST KIT

The TSTL-3A is modeled after our popular TSTL-1. The TSTL-3A

incorporates a standard “AAA” battery in addition to a newly

designed head unit for more rugged use. The TSTL-3A is the must

have tool for quick and easy cable identification.

STANDARD CABLE RINGER

The TSTL-1 cable ringer has been designed to “tone” cables allowing

quick identification. The TSTL-1 detects DC continuity with an audible

tone or indicates DC shorts by lighting the LED. Uses 12V replaceable

battery.

The TSTL-3AKIT comes complete with all the test adapters an installer

needs to verify different connector/cable configurations. Can be used

with TSTL-1 or TSTL-3A to identify continuity or shorts in cables. Kit

includes TSTL-3A and adapters for F, BNC, RCA and SMB.

MODEL SF-95-22

MODEL TSTL-3A

MODEL TSTL-3AKIT

MODEL TSTL-1

MODEL PFT-A MODEL PFT MODEL PFTK

MDU CABLE ID SYSTEM

The PFT System allows the MDU installer to identify up to 20 locations or cables by installing coded push-on

terminators in an apartment or routing box location and then electronically identify the correct cable at the other

end using a Volt/Ohm (VOM) meter. The PFT-A adapter plugs into your VOM, and when set on 50k or greater the

correct terminator code is displayed as the first 2 digits on your meter.

TEST EQUIPMENT

DARK METER SYSTEMMODELS DST-5000 : DSTR-5000

Generates Five Carriers: 20, 55,

950, 1450, and 2150 MHz.

Verifies Cable Attenuation

Cable ID Function (Using PFT Terminators)

TDR to Detect Cable Length and

Distance to Shorts

Stores Up to 50 Locations

Data Downloadable Via RS-232

Rechargeable Li-Ion Battery

Durable Neoprene Case

FEATURES

The Holland Dark Meter and companion transmitter make

it possible to sweep RF distribution systems before CATV /

satellite signals are present. This pre-signal testing verifies

if connections are correct, if all passives and cables are

passing signals, and if not, where an open or short circuit

exists. The measured signal attenuation levels for up to 50

separate stations can be stored in memory. A built-in RS-

232 port allows the user to download this data from the

meter to a remote device at the push of a single button. The

Holland Dark Meter is also capable of measuring cable

length using the TDR function. The cable ID function can be

used to identify up to 20 locations by using PFT terminators.

HAND HELD TEST METER/ RECEIVER


CUSTOMER NOTES:DD

MODEL DST-5000 MODEL DSTR-5000

TEST EQUIPMENT

DARK METER SYSTEM


TRANSMITTER : MODEL DSTR-5000

Frequencies (MHz) 20, 55, 950, 1450, 2150

Output Level 23 dBmV (Adj.)

Operating Time Between Charges 10 Hours

DC Power Supply Included

Battery Charge Indicator LED Low = Red / Charging = Amber / Charged = Green

Cable Types (50 & 75 Ohms) RG6, RG59, RG11, RG58, Custom Cables

GENERAL

Dimensions 87 x 40 x 130 mm

Weight 335 g

Battery Li-ION (re-chargeable)

Charging Time 5 hours

RECEIVER : MODEL DST-5000

Frequencies (MHz) 20, 55, 950, 1450, 2150

Input Range - 16 dBmV to +23 dBmV

Memory Stations 50

TDR

TDR Range 300’ (Max.) / 15’ (Min.)

CABLE ID

Reads 20 locating terminators and cable shorts.

PFT terminator kit...20 push-on terminators included

DISPLAY

Display Type 64 x 128, B/W Dot Matrix

Display Range 40 dB Total in 2 dB Steps

GENERAL

Dimensions 104 x 47 x 234 mm

Weight 500 g

Battery Li-ION (Rechargeable)

Operating Time Between Charges 8 hours

Battery Charge Indicator Low, Charged

SPECIFICATIONS

116 |

* Includes chargers, neoprene case, and 20 cable ID terminators.


TEST EQUIPMENT

SIGNAL LEVEL METERSMODEL ST-5128S : ST-4000D


The ST-5128S is a full-featured hand-held signal measurement device. The ST-5128S performs signal level, channel

flatness, video/audio ratio and full spectrum scans, making it the perfect tool for any installer.

HAND HELD SIGNAL LEVEL METER

The ST-4000D is our new hand-held signal level meter that has been fine tuned to handle the basic needs of

maintaining RF distribution systems. Its rugged design and protective carrying case make it a perfect choice for

everyday use.

HAND HELD SIGNAL LEVEL METER

MODEL ST-5128S

MODEL ST-4000D

Signal Level Measurements (Aural and Visual Carriers)

Single Channel Spectrum (Views Channel Flatness, In-band and LSB Levels)

All Channel Sweep / Frequency Spectrum (870 MHz)

Full Bandwidth Operation (CATV: Ch. 2-135, Off-Air: 2-79)

Wide Dynamic Range (-40 dBmV to 60 dBmV)

Direct Channel or Frequency Entry(Programmed Channels or 10 kHz Frequency Selection)

Full Bandwidth Operation (CATV: Ch. 2-136, Off-Air: 2-69)

Analog, Digital ATSC, 8VSB Measurement

Wide Dynamic Range (-28 to 55 dBmV)

Signal Level Measurements (Aural and Visual Carriers)

Direct Channel or Frequency Entry

Group Channel Selection (For quick system tests just push a button and read only the favorite channels)

Leather Case

TEST EQUIPMENT

SIGNAL LEVEL METERS


MODEL ST-5128S

Input Frequency 46-870 MHz

Accuracy ±1.5 dB

Minimum Tuning Increment 10 kHz

I.F. Bandwidth 300 kHz

Input Range -40 to 60 dBmV

SPECTRUM ANALYZER MODE

Resolution 100 kHz

Dynamic Range 40 dB

GENERAL

Dimensions 4.3” x 10” x 2.6”

Weight 2 lbs.

Battery Ni-MH (Rechargeable)

Operating Time Between Charges 8 hours

Charger Included

Case Included

MODEL ST-4000D

Input Frequency 46 - 870 MHz

Accuracy ±2.5 dB

Minimum Tuning Increment 10 kHz

I.F. Bandwidth 280 kHz

Input Range -28 to 55 dBmV

GENERAL

Dimensions 8.4” x 3.7” x 1.8”

Weight 3 lbs. (w/ Charger)

Battery Ni-MH (Rechargeable)

Charging Time 5 hours

Charger Included

Case Included

SPECIFICATIONS

118 |


TOOLS

TOOLSMODELS ACT-270 : ACT-483 : HX 596Q : HCT-116 : CT-21R : CT-FBR : CST-6 : CST-1855 : CPT-6590 : CPT-7538


HEX CRIMP TOOLS

COMPRESSION TOOLS

COAX CABLE STRIPPERS

Holland Electronics offers a variety of hex crimp tools designed for use with different connector sizes and types.

For use with Holland compression connectors or similar (21mm closure). Each tool utilizes a ratchet mechanism that

insures complete closure.

Holland offers a variety of cable strippers which provide industry standard 1/4” x 1/4” strips.

ADJUSTABLE

Works with RG-59, 6 andMini-Coax. Features adjustablestrip length and blade height.

FIXED BLADE

Works with RG-6 Coax.Replaceable blade cartridge.

MULTI-CARTRIDGE

Works with RG-6, 59 and Mini-Coaxutilizing replaceablecartridges for specific cable sizes.

FIXED BLADE

Works with Mini-Coax.Replaceable blade cartridge.

MODEL ACT-270Mini Coax Connectors (Hex .270)

MODEL ACT-483Mini Coax Connectors (Hex .213 & .270)

MODEL HX 596QRG-59, RG-6, and RG-6 Quad Connectors

(Hex .324 & .360)

MODEL HCT-116RG-59, RG-6, and RG-11 Connectors

(Hex .324 & .472)

MODEL CT-21R(F Type Connectors)

MODEL CT-FBR(F, BNC & RCA Connectors)

MODEL CST-6MODEL CST-1855

MODEL STMINI596

MODEL CPT-6590

MODEL CPT-7538

TOOLS


TOOLSMODELS CFGT-1 : CIT-1 : GTT-4 : GTT-7 : ST-1 : PPLT-T : DRB 3/8M : DRB 3/8W

CONNECTOR INSTALLATION TOOL

CONNECTOR GUIDE & INSTALLATION TOOL

For use with GTP-59 style lockingterminators. Works with HollandGLT. 4” length.

For use with GTP-59 style lockingterminators. Works with HollandGLT. 7” length.

For use with the Holland PPLT Series locking terminators.For use with CATV security sleeves.

This tool is a unique multi-function device. Provides a cable center/dialec-

tric guide function which insures proper alignment of cable into the F con-

nector. Excellent for use in cold weather when installers typically wear

gloves. CGT-FBR model available for use with RCA and BNC connectors.

The CIT-1 installs and removes F connectors in high density and hard to

reach locations, and is the only tool that works with bent coax. Provides

enough leverage to achieve a 30 in/lb tightening force by hand. Helps insure

proper connections thereby reducing the potential of loose connector

related service calls. Patent #6,817,272.

DRILL BITS

Holland offers precision machined masonry and wood drill bits made of quality steel. All masonry bits are designed

with high quality carbide tips, and all wood bits have precision machined flutes and tips for great performance.

LOCKING TERMINATOR TOOLS

MODEL CFGT-1

MODEL CIT-1

MODEL GTT-4 MODEL GTT-7

MODEL ST-1

DRB 3/8M (3/8” Diameter) DRB 3/8W (3/8” Diameter)

MODEL PPLT-T

MASONRY WOOD

INDEX

INDEX


1855940 . . . . . . . . . . . . . . . 201855940-STARTER. . . . . . 291855940STARTERC . . . . . 291855941 . . . . . . . . . . . . . . . 201855942 . . . . . . . . . . . . . . . 201855943 . . . . . . . . . . . . . . . 20A-2, 3, 6, 10. . . . . . . . . . . . 86A-21-4 . . . . . . . . . . . . . . . . 36A-22-* . . . . . . . . . . . . . . . . 86A-24-6, 9, 12 . . . . . . . . . . . 36A-24-6G, 9G, 12G. . . . . . . 36A-5/8 . . . . . . . . . . . . . . . . . 36AB-4, 75, 90 . . . . . . . . . . . 81ACT-270, 483 . . . . . . . . . 119AHC-16-860 . . . . . . . . . . . 71ATD-FCU*. . . . . . . . . . . . . 47BFA . . . . . . . . . . . . . . . . . . 31BNC-C290. . . . . . . . . . . . . 27BNC-C324. . . . . . . . . . . . . 27BNC1855-FP. . . . . . . . . . . 29BNCFPFBH. . . . . . . . . . . . 29BP-1*, 2*, 4* . . . . . . . . . . 83BPF-* . . . . . . . . . . . . . . . . 49BRF . . . . . . . . . . . . . . . . . . 50CBW-1LED . . . . . . . . . . . . 82CBW-1P . . . . . . . . . . . . . . 82CC-6*, 7*, 155* . . . . . . . . 84CCI-1 . . . . . . . . . . . . . . . . . 52CCOL-1 . . . . . . . . . . . . . . . 82CEF750-*. . . . . . . . . . . . . . 49CFGT-1 . . . . . . . . . . . . . . 120CISP . . . . . . . . . . . . . . . . . 52CIT-1 . . . . . . . . . . . . . . . . 120CPT-6590, 7538. . . . . . . . 119CST-6, 1855. . . . . . . . . . . 119CT-* . . . . . . . . . . . . . . . . . . 84CT-21R, FBR . . . . . . . . . . 119CWPC-18 . . . . . . . . . . . . . 36D575, 575D . . . . . . . . . . . 111DAF-* . . . . . . . . . . . . . . . 113DAM-* . . . . . . . . . . . . . . 113DCG-* . . . . . . . . . . . . . . . . 95DCG-*SB . . . . . . . . . . . . . 97DCG2-* . . . . . . . . . . . . . . . 95DCG2-*SB . . . . . . . . . . . . 97DCG4-* . . . . . . . . . . . . . . . 95DCG4-*SB . . . . . . . . . . . . 97DCWG-* . . . . . . . . . . . . . . 95DCWG-*SB . . . . . . . . . . . 97DMUX35 . . . . . . . . . . . . . 111DP 54. . . . . . . . . . . . . . . . 107DPD2 . . . . . . . . . . . . . 51, 107

DRB 3/8M, 3/8W . . . . . . 120DST-5000, DSTR-5000. . 115F-5681G. . . . . . . . . . . . . . . 27F-71 . . . . . . . . . . . . . . . . . . 31F-81, F-811 . . . . . . . . . . . . 33F-90, 90HR . . . . . . . . . . . . 31F11-460, 460WOL. . . . . . . 28F11-480 . . . . . . . . . . . . . . . 28F1855-FP . . . . . . . . . . . . . . 29F56-324 . . . . . . . . . . . . . . . 27F56-324CC. . . . . . . . . . . . . 27F56-324CCWP . . . . . . . . . 27F56-324D. . . . . . . . . . . . . . 27F56-324G. . . . . . . . . . . . . . 27F56-324GWP . . . . . . . . . . 28F56-324K . . . . . . . . . . . . . . 27F56-324T . . . . . . . . . . . . . . 27F56-324W . . . . . . . . . . . . . 28F56-324WL . . . . . . . . . . . . 28F56-324WOL. . . . . . . . . . . 28F56-342G, T. . . . . . . . . . . . 27F56-357G, T. . . . . . . . . . . . 27F56-UNIV . . . . . . . . . . . . . 27F56-UNIV-WL. . . . . . . . . . 28F59-290CC. . . . . . . . . . . . . 27F59-290D. . . . . . . . . . . . . . 27F59-290G. . . . . . . . . . . . . . 27F59-290T . . . . . . . . . . . . . . 27F59-290WOL. . . . . . . . . . . 28F59-UNIV . . . . . . . . . . . . . 27F-59T, 59TH. . . . . . . . . . . . 31F6-324 . . . . . . . . . . . . . . . . 28F6-324WL . . . . . . . . . . . . . 28F7-413T . . . . . . . . . . . . . . . 28F9-290 . . . . . . . . . . . . . . . . 27FAM-*, HR . . . . . . . . . . . . 32FAMP-*, HR . . . . . . . . . . . 32FF-R . . . . . . . . . . . . . . . . . . 31FOD-1310TX . . . . . . . . . . . 45FOD-AC. . . . . . . . . . . . . . . 45FOD-FRX . . . . . . . . . . . . . . 46FOD-PF . . . . . . . . . . . . . . . 45FOD-RPR. . . . . . . . . . . . . . 46FOD-RPT. . . . . . . . . . . . . . 46FTB-56, FTB-59 . . . . . . . . 84G-F811. . . . . . . . . . . . . . . . 33G-F81F, F* . . . . . . . . . . . . . 33G-F81FXL . . . . . . . . . . . . . 33G-G2B2 . . . . . . . . . . . . . . . 35G-PF-59. . . . . . . . . . . . . . . 31GDS-2V . . . . . . . . . . . . . . 102GF-1855-A. . . . . . . . . . . . . 29

GHDC-**. . . . . . . . . . . . . 105GHLS-2, 3 . . . . . . . . . . . . 105GHP-1 . . . . . . . . . . . . . . . 105GHS-2, 3, 4, 8 . . . . . . . . . . 89GHS-2, 3, 4, 8 FC LI . . . . . 91GHS-2P, 3P, 4P . . . . . . . . 101GHS-2TL . . . . . . . . . . . . . 102GHT2-*, 4-*, 8-*. . . . . . . 103GL-G2B2 . . . . . . . . . . . . . . 35GLT, -LR. . . . . . . . . . . . . . . 32GLT -T . . . . . . . . . . . . . . . . 32GRB-1, 2 . . . . . . . . . . . . . . 35GRB-2DHR . . . . . . . . . . . . 35GRB-2THR-UL . . . . . . . . . 35GRB-AR . . . . . . . . . . . . . . 52GRB-S, SL. . . . . . . . . . . . . 35GSV-2, 3, 4, 6, 8 . . . . . . . . 89GTT-4, 7. . . . . . . . . . . . . . 120HA-201T . . . . . . . . . . . . . . . 3HA-30 . . . . . . . . . . . . . . . . . 3HAC-10RK. . . . . . . . . . . . . 78HCA-3051 . . . . . . . . . . . . . . 9HCA-3051RK. . . . . . . . . . . 69HCA-3086RK. . . . . . . . . 9, 69HCA-3086RP. . . . . . . . . . . . 9HCA-36ERA . . . . . . . . . . . 11HCDA-1, 2, 4, FRA, RA . . 13HCDA-PI . . . . . . . . . . 13, 102HCG-12, 24 . . . . . . . . . . . . 71HCT-116 . . . . . . . . . . . . . 119HDA-10 . . . . . . . . . . . . . . . . 5HDA-1000 . . . . . . . . . . . . . . 7HDA-15 . . . . . . . . . . . . . . . . 5HDA-25/25E . . . . . . . . . . . . 5HDA-30 . . . . . . . . . . . . . . . 5HDA-36 . . . . . . . . . . . . . . . 5HDM-1 . . . . . . . . . . . . . . . 65HDTV-ST2. . . . . . . . . . . . . 65HFS-2, 2P, 4, 4P. . . . 93, 108HFS-2D, 3D, 4D . . . . 93, 108HLSJ . . . . . . . . . . . . . . . . . 51HMA-550H, 860H. . . . . . . 59HMDS . . . . . . . . . . . . . . . . 55HMM-10H, 3. . . . . . . . . . . 79HMMA . . . . . . . . . . . . . . . 55HMMB . . . . . . . . . . . . . . . 54HMMS . . . . . . . . . . . . . . . 55HMPS . . . . . . . . . . . . . . . . 54HMR . . . . . . . . . . . . . . . . . 54HMS-16APR. . . . . . . . . . . 73HMS-412ARK. . . . . . . . . . 73HMS-4A, 8A . . . . . . . . . . 109

HMS-54B, 58B, C . . . . . 109HPF-* . . . . . . . . . . . . . . . . 50HPF-54HR . . . . . . . . . . . . . 50HPH-860, 860AD . . . . . . . 63HPM55-*. . . . . . . . . . . . . . 57HR D2, D3 . . . . . . . . . . . . 107HR PI . . . . . . . . . . . . . . . . 102HRF PI . . . . . . . . . . . . . . . 102HRF PIB . . . . . . . . . . . . . 102HR PID1422 . . . . . . . . . . 110HR S2, S3, S4, S8 . . 99, 108HR T1** . . . . . . . . . . 99, 108HR TW* . . . . . . . . . . 99, 108HRV S2, 4, 8 . . . . . . . . . . . 99HRV T1** . . . . . . . . . 99, 108HSA-* . . . . . . . . . . . . . . . . 67HSM55-*. . . . . . . . . . . . . . 57HSU-2, 3, 4, 8 . . . . . . . . . . 87HVS-1*, 3, 5, 6 . . . . . . . . . 20HX 596Q . . . . . . . . . . . . . 119INSTALLER PACK . . . . . . 29J144-S. . . . . . . . . . . . . . . . 21J36-6BFF. . . . . . . . . . . . . . 22J36-BFF. . . . . . . . . . . . . . . 22J72-6BFF. . . . . . . . . . . . . . 22J72-BFF. . . . . . . . . . . . . . . 22J72-RGB . . . . . . . . . . . . . . 21J72-S. . . . . . . . . . . . . . . . . 21JRR-3, 6 . . . . . . . . . . . . . . 21JRR-3D, 6D, 12D . . . . . . . 21JRR-3T, 6T, 12T . . . . . . . . 21LA-10, 520. . . . . . . . . . . . . 15LA-2150H . . . . . . . . . . . . . 15LA Series . . . . . . . . . . . . . 17LPF-* . . . . . . . . . . . . . . . . . 50MBC . . . . . . . . . . . . . . . . . 36Mini Head-End System . 53MOR-71. . . . . . . . . . . . . . . 77MS-2D. . . . . . . . . . . . . . . 102NA Series. . . . . . . . . . . . . 17NE1000LN. . . . . . . . . . . . . 39NE1100L . . . . . . . . . . . . . . 41NE1101L . . . . . . . . . . . . . . 41NE5000L . . . . . . . . . . . . . . 40NE6000L-* . . . . . . . . . . . . 43NE7000 . . . . . . . . . . . . . . . 40NE7100 . . . . . . . . . . . . . . . 42NF-*. . . . . . . . . . . . . . . . . . 50OCP-* . . . . . . . . . . . . . . . . 47OEM RF Connectors. . . . 37ORS . . . . . . . . . . . . . . . . . . 77PA Series . . . . . . . . . . . . . 17

INDEX

INDEX


PAL Series . . . . . . . . . . . . 17PF-59 . . . . . . . . . . . . . . . . . 31PFT, PFTA, PFTK . . . . . . 114PPLT-T. . . . . . . . . . . . . . . 120PPLT-75, LR, T . . . . . . . . . 32Pre-Built Head-End . . . . 78PS-10. . . . . . . . . . . . . . . . . 16RCA-1855 . . . . . . . . . . . . . 29RCA59-290 . . . . . . . . . . . . 27RCA59-290G . . . . . . . . . . . 27RCA-F . . . . . . . . . . . . . . . . 31RCAFPFBH . . . . . . . . . . . . 29RCA-Y . . . . . . . . . . . . . . . . 22RCA-YF . . . . . . . . . . . . . . . 22RG11-60-*. . . . . . . . . . . . . 19RG11-60-*M . . . . . . . . . . . 19RG6-60-*B . . . . . . . . . . . . 19RG6-60-*R . . . . . . . . . . . . 19RG6-60-PR* . . . . . . . . . . . 19RG6-Q-** . . . . . . . . . . . . . 19RK6-2800. . . . . . . . . . . . . . 77RK-6S . . . . . . . . . . . . . . . . 77RSW . . . . . . . . . . . . . . . . . 78RTV-3 . . . . . . . . . . . . . . . . 85SA-1F . . . . . . . . . . . . . . . . 52SAM-3402. . . . . . . . . . . . 109Satellite Dist. Systems. 112SAWM60-*. . . . . . . . . . . . 61SB-4, 6, 8 . . . . . . . . . . . . . 36SBD . . . . . . . . . . . . . . . . . . 51SC-3, 4. . . . . . . . . . . . . . . . 81SF-95-22 . . . . . . . . . . . . . 114SFT-130, 150 . . . . . . . . . . . 85SHC . . . . . . . . . . . . . . . . . 75SLC-179DT-FP . . . . . . . . . 29SLC-6M. . . . . . . . . . . . . . . 26SLC-BNC-179DT . . . . . . . 29SLC-BNC-MINI25U. . . . . 29SLC-MINI25U. . . . . . . . . . 29SLC-RCA-179DT . . . . . . . 29SLC-RCA-MINI25U . . . . . 29SLC11 . . . . . . . . . . . . . . . . 25SLC11Q . . . . . . . . . . . . . . . 25SLC1855-90-BNC. . . . . . . 29SLC1855-90-F . . . . . . . . . . 29SLC1855-90-RCA . . . . . . . 29SLC1855-BNCFP, U . . . . . 29SLC1855-FP2 . . . . . . . . . . 29SLC1855-FPU . . . . . . . . . . 29SLC1855-RCAFP, U . . . . . 29SLC59-BNC . . . . . . . . . . . 26SLC59-BNCG . . . . . . . . . . 26

SLC59-HEC . . . . . . . . . . . . 26SLC59-RCA. . . . . . . . . . . . 26SLC59-RCAG . . . . . . . . . . 26SLC6-BNC . . . . . . . . . . . . 26SLC6-BNCG . . . . . . . . . . . 26SLC6-RCA. . . . . . . . . . . . . 26SLC6-RCAG . . . . . . . . . . . 26SLC6Q-BNC . . . . . . . . . . . 26SLC6Q-BNCG. . . . . . . . . . 26SLC6Q-RCA . . . . . . . . . . . 26SLC6Q-RCAG . . . . . . . . . . 26SLCU-* . . . . . . . . . . . . . . . 23SLCU-*BNC . . . . . . . . . . . 23SLCU-*RCA . . . . . . . . . . . 23SLCU-59 . . . . . . . . . . . . . . 26SLCU-6 . . . . . . . . . . . . . . . 26SLCU-6-0 . . . . . . . . . . . . . 26SLCU-6Q . . . . . . . . . . . . . . 26SLCU-6QO . . . . . . . . . . . . 26SLCU-6T . . . . . . . . . . . . . . 26SLCUHEC2 . . . . . . . . . . . . 26SMBFP90 . . . . . . . . . . . . . 29SMBFP . . . . . . . . . . . . . . . 29SMBFPF . . . . . . . . . . . . . . 29SRR-* . . . . . . . . . . . . . . . . 24SS . . . . . . . . . . . . . . . . . . . 32SS-NS . . . . . . . . . . . . . . . . 32SSS . . . . . . . . . . . . . . . . . . 32ST-1 . . . . . . . . . . . . . . 32, 120ST-4000D . . . . . . . . . . . . 117ST-5128S. . . . . . . . . . . . . 117ST-MOD . . . . . . . . . . . . . . 54STMINI596 . . . . . . . . . . . 119STVC . . . . . . . . . . . . . 51, 107SV-RCA. . . . . . . . . . . . 22, 31TA Series . . . . . . . . . . . . . 17TE-128, 130, 136, 140. . . . 85TFW-* . . . . . . . . . . . . . . . 113TMC-* . . . . . . . . . . . . . . . 113TMP-* . . . . . . . . . . . . . . . 113TMS-* . . . . . . . . . . . . . . . 113TSM-4 . . . . . . . . . . . . . . . 113TSTL-1. . . . . . . . . . . . . . . 114TSTL-3A, 3AKIT . . . . . . . 114TT-* . . . . . . . . . . . . . . . . . . 50US575-T . . . . . . . . . . . . . 111UVSJ . . . . . . . . . . . . . . . . . 51VBC . . . . . . . . . . . . . . . . . . 31VBC-HR. . . . . . . . . . . . . . . 31VC-6-5 . . . . . . . . . . . . . . . . 85WB-1UV . . . . . . . . . . . . . . 84WF . . . . . . . . . . . . . . . . . . . 50

WP-81* . . . . . . . . . . . . . . . 83WP-81D* . . . . . . . . . . . . . 83WP-81G* . . . . . . . . . . . . . 83WP-81GD* . . . . . . . . . . . . 83WP-T81*. . . . . . . . . . . . . . 83WP-T81D* . . . . . . . . . . . . 83WP-T81G* . . . . . . . . . . . . 83WP-T81GD* . . . . . . . . . . . 83WS-250, 375, 500 . . . . . . . 84

FREQUENCY ALLOCATION CHARTVHF & CATV CHANNELS

BANDALPHA/

NUMERIC

SCA VISUALCARRIER

FREQ.

SUBSUBSUBSUBSUBSUBSUBSUB

T-7T-8T-9T-10T-11T-12T-13T-14

713192531374349

LOWLOWLOWLOWLOW

2 / 23 / 34 / 45 / 56 / 6

55.2561.2567.2577.2583.25

MIDMIDMIDMIDMIDMIDMIDMIDMIDMIDMIDMIDMIDMID

A-5 / 95A-4 / 96A-3 / 97A-2 / 98*A-1 / 99*A / 14*B / 15*C / 16*D / 17E / 18F / 19G / 20H / 21I / 22

91.2597.25103.25109.25115.25121.25127.25133.25139.25145.25151.25157.25163.25169.25

HIGHHIGHHIGHHIGHHIGHHIGHHIGH

7 / 78 / 89 / 9

10 / 1011 / 1112 / 1213 / 13

175.25181.25187.25193.25199.25205.25211.25

SUPERSUPERSUPERSUPERSUPERSUPERSUPERSUPERSUPERSUPERSUPERSUPERSUPERSUPER

J / 23K / 24*L / 25*M / 26*N / 27*O / 28*P / 29*Q / 30*R / 31*S / 32*T / 33*U / 34*V / 35*W / 36*

217.25223.25229.25235.25241.25247.25253.25259.25265.25271.25277.25283.25289.25295.25

HYPERHYPERHYPERHYPERHYPERHYPERHYPERHYPERHYPERHYPERHYPERHYPERHYPERHYPERHYPERHYPER

AA / 37*BB / 38*CC / 39*DD / 40*EE / 41*FF / 42*GG / 43*HH / 44*II / 45*

JJ / 46*KK / 47*LL / 48*

MM / 49*NN / 50*OO / 51*PP / 52*

301.25307.25313.25319.25325.25331.25337.25343.25349.25355.25361.25367.25373.25379.25385.25391.25

VHF & CATV CHANNELS

BANDALPHA/

NUMERIC

SCA VISUALCARRIER

FREQ.

HYPERHYPERHYPERHYPERHYPERHYPERHYPERHYPERHYPERHYPER

QQ / 53*RR / 54SS / 55TT / 56UU/ 57VV / 58

WW / 59XX / 60YY / 61ZZ / 62

397.25403.25409.25415.25421.25427.25433.25439.25445.25451.25

ULTRAULTRAULTRAULTRAULTRAULTRAULTRAULTRAULTRAULTRAULTRAULTRAULTRAULTRAULTRAULTRAULTRAULTRAULTRAULTRAULTRAULTRAULTRAULTRAULTRAULTRAULTRAULTRAULTRAULTRAULTRAULTRAULTRAULTRAULTRAULTRAULTRAULTRAULTRAULTRAULTRAULTRAULTRAULTRAULTRAULTRAULTRAULTRAULTRAULTRA

AAA / 63BBB / 64CCC / 65DDD / 66EEE / 67FFF / 68

GGG / 69HHH / 70

III / 71JJJ / 72KKK / 73LLL / 74

MMM / 75NNN / 76OOO / 77PPP / 78QQQ / 79RRR / 80SSS / 81TTT / 82UUU / 83VVV / 84

WWW / 85XXX / 86

8788899091929394100101102103104105106107108109110111112113114115116117

457.25463.25469.25475.25481.25487.25493.25499.25505.25511.25517.25523.25529.25535.25541.25547.25553.25559.25565.25571.25577.25583.25589.25595.25601.25607.25613.25619.25625.25631.25637.25643.25649.25655.25661.25667.25673.25679.25685.25691.25697.25703.25709.25715.25721.25727.25733.25739.25745.25751.25

UHF BROADCAST CHANNELS

CHANNEL#

VISUAL CARRIERFREQ.

CHANNEL #

VISUAL CARRIERFREQ.

14151617181920

471.25477.25483.25489.25495.25501.25501.25

42434445464748

639.25645.25651.25657.25663.25669.25675.25

21222324252627

513.25519.25525.25531.25537.25543.25549.25

49505152535455

681.25687.25693.25699.25795.25711.25717.25

28293031323334

555.25561.25567.25573.25579.25585.25591.25

56575859606162

723.25729.25735.25741.25747.25753.25759.25

35363738394041

597.25603.25609.25615.25621.25627.25633.25

63646566676869

765.25771.25777.25783.25789.25795.25801.25

MAXIMUM ATTENUATION(dB/100 FT @ 68 DEG F)

FREQUENCY RG-59 RG-6 RG-11 .500 .625 .750

5552112502703003303504004505005506007508709501000120014501750185020002150

.771.883.593.894.054.274.504.644.885.305.505.906.186.967.547.908.098.919.8210.9211.2311.6712.10

.571.502.873.123.243.433.613.724.004.284.514.764.985.626.096.396.547.187.898.748.999.349.69

.36

.951.811.982.062.172.292.362.532.692.853.013.163.583.904.104.234.715.295.956.126.366.60

.16

.551.081.191.241.311.381.431.531.631.731.821.912.162.352.492.532.833.123.473.603.763.92

.13

.45

.89

.981.021.081.141.181.271.351.431.511.581.791.952.042.112.322.612.922.973.123.24

.11

.37

.73

.81

.84

.89

.94

.971.051.121.181.251.311.481.611.721.741.962.162.412.522.642.75

Holland Electronics offers a 90 day warranty on all products with the following excep-

tions; 1 year warranty on all meters and distribution amplifiers, 5 year warranty on all

head-end products.

WARRANTY INFORMATION:

2007 Holland Catalog Email

Documents

Transcript of 2007 Holland Catalog Email