1997 SeaDoo Tool Booklet - SeaDoo...

TOOLBOOKLET

P/N 219 200 106

®

www.SeaDooManuals.net

Watercraft®

Litho’d in Canada (SSI-9701 PRM)®*Trademarks of Bombardier Inc.©1996 Bombardier Inc. All rights reserved.

219 200 106 PAGE 1 OF 19

SERVICE TOOLSThis is a list of tools to properly service Sea-Doo watercraft. The list includes both the mandatory toolsand the optional tools that are ordered separately. The list of Service Products, both mandatory andoptional, are not part of any kit and must all be ordered separately. If you need to replace or add to yourtool inventory, these items can be ordered through your regular parts channels.NOTE: The numbers outlined in black (example: ) are reference numbers to tools from other divi-sions (Ski-Doo Snowmobiles and/or Sea-Doo Jet Boats). Matching reference numbers indicate the sametool is being used on both products, even if the part numbers are different.

1

FO

R A

PP

RO

VA

L O

NLY

SEA-DOO TOOL BOOKLET


OF 19 219 200 106

ENGINE — MANDATORY SERVICE TOOLS

Degree wheelP/N 295 000 007

A00B334

APPLICATIONAll models.

Rubber padP/N 295 000 101

F01B0J4


Bearing pusherP/N 290 876 500

A00B2J4

APPLICATIONAll engines except 787.

1

360 350 340330

320

310300

290280

270260

250240

230220

210200190180170160

150

140

130

120

110

100

9080

7060

5040 30 20 10

10 2 030

40

5060

7080

90100

110120

130140

150160170180190200210

220

23024

025

026

027

02 8

02 9

030

0310

320330

340 3 50 36 0

547

12

F01D884

1) PullerP/N 290 876 298

2) Protective cap(both ends)P/N 290 876 557

3) Ring (both ends)P/N 290 977 490

4) Ring halves (PTO)P/N 290 977 475 (2)

5) Distance ring (MAG)P/N 290 876 569

6) Ring halves (MAG)P/N 290 276 025 (2)

7) Screw M8 x 40P/N 290 840 681 (2)

8) Screw M8 x 70P/N 290 841 201 (2)


MAG side PTO side

8

1

52

3

4

46

8 7 7

200

554

555

556

557

558

559

560

Piston circlip installerA) P/N 295 000 077

B) P/N 290 877 016

A01B1P4

APPLICATION

A) 587 engine.B) 657, 717 and 787 engines.

PusherP/N 290 876 605

A00C0Y4


Bearing pusherP/N 290 876 501

F00B074

APPLICATION787 engines.

202

548

Pistoncirclip

229


219 200 106 PAGE 3 OF 19

ENGINE (continued) — MANDATORY SERVICE TOOLS

Digital multimeterP/N 529 022 000

F01B1O4


242

NEW

PullerP/N 295 000 106

A00C1A4

Puller plateP/N 290 876 080

A00C1R4

Extension handleP/N 295 000 125

F01D164

Screw M8 x 35 (3)P/N 290 841 591

F00A094

Sleeve (3)P/N 290 847 220

F00A0A4


5

549

550

551

552

PTO flywheelremover/installerP/N 295 000 001

F01J0T4

APPLICATION587, 657(X), 717 engines (except HX 5881/5882).

NOTE: This tool is also usedfor the impeller.

PullerP/N 290 876 488

F01B0I4

APPLICATIONAll engines.

A) Alignment tool supportP/N 295 000 090

B) Alignment shaftP/N 295 000 093

C) Alignment shaftP/N 295 000 141

D) AdaptorP/N 295 000 157

F01L2R4

APPLICATION

A) All models.B) All models except HX and XP

5662.C) HX.D) HX (except 5880) and XP 5662.

553

562

2 1

563

571

570

776


OF 19 219 200 106

ENGINE (continued) — MANDATORY SERVICE TOOLS

Piston pin pullerA) P/N 290 877 092

B) P/N 295 000 105

F01B0V4

APPLICATION

A) 657, 717 and 787 enginesReplacement parts:1) Locating sleeve

P/N 290 877 1812) Expansion sleeve

P/N 290 877 0413) Extracting nut

P/N 290 877 155B) 587 engine

Replacement parts:1) Locating sleeve

P/N 295 000 118 (2)2) Expansion sleeve

P/N 295 000 117 (2)3) Extracting nut (2)

P/N 295 000 115

MPEM programmerP/N 295 000 127

F01B254

APPLICATIONModels equipped with the DESS.

566

565

1 2

3

772

771

770

769

768

767

567

Flywheel extractorP/N 295 000 156

F00B044

APPLICATIONHX (except 5880) and models with a 787 engine.

Engine leak tester kitP/N 295 500 352

F01B2Q5


Ring gear puller toolP/N 420 976 235

F01B294

APPLICATION787 engine.

777

NEW

778

NEW

569

Ring gear blocking toolP/N 295 000 155

F01B264


568

NEW


219 200 106 PAGE 5 OF 19

COOLING/FUEL/OIL SYSTEMS — MANDATORY SERVICE TOOLS

Hose pincherP/N 295 000 076

A01B2I4


Gear holderP/N 290 277 905

A00C164


PliersP/N 295 000 070

Oetiker 1099

F01D174


2

235

601

PliersP/N 295 000 054

Caillau

F01B1T4


NOTE: This tool is also used forthe propulsion system.

Coupler hoseP/N 295 500 258

41 cm (16 in)

F01E0Z4

APPLICATIONAll models without a jet pump support.

606

752


OF 19 219 200 106

PROPULSION SYSTEM — MANDATORY SERVICE TOOLS

Impeller remover/installerP/N 295 000 001

F01J0T4


NOTE: This tool is also used forthe PTO flywheel.

PliersP/N 295 000 069

Oetiker 1090

F01D184


Impeller shaft holderP/N 295 000 082

F01B0W4


553

602

603

Bearing/seal installerP/N 295 000 107

F01J4K4


Impeller shaft guideP/N 295 000 002

F01J1O4


PliersP/N 295 000 054

Caillau

F01B1T4


NOTE: This tool is also used forthe fuel system.

604

605

606

VTS toolP/N 295 000 133

F01B2P4

APPLICATIONAll models with a rear mounted VTS motor.

607


219 200 106 PAGE 7 OF 19

OPTIONAL SERVICE TOOLS 0ENGINE

Ring compressorA) P/N 290 876 972B) P/N 295 000 112C) P/N 290 876 979

A01B1T4

APPLICATION

A) 587 engine (76 mm).B) 657(X) engines (78 mm).C) 717 and 787 engines (82 mm).

Coil centering toolP/N 290 876 922

A01B1V4


Cylinder aligning toolP/N 290 876 904

A00B084


207

751

766

209

220

Stroboscopic timing lightP/N 529 031 900

A00B4F4


Dial indicator (TDC gauge)P/N 295 000 143

A00B4E4


Distance gaugeA) P/N 290 876 826B) P/N 290 876 827C) P/N 290 876 828

F01B0H4

APPLICATION

A) 587 and 657 engines.B) 717 engines.C) 787 engine.

225

NEW

230

779

760

561

Digital/induction typetachometerP/N 295 000 100

F01B1G4


Bombardier ignition testerP/N 295 000 008

A00C1K4


Timing mark pointerP/N 295 000 130

F01B2O4


237

236

0

10

20

30

4050

90

80

70

60

100

Low High

Indicator

IGNITION TESTER

Reset

774


OF 19 219 200 106

ENGINE (continued) — OPTIONAL SERVICE TOOLS

Timing mark pointerP/N 295 000 135

F01H544


Oil seal pusherP/N 290 877 740

F01B2C4


Ring halves and ringP/N 290 876 330(halves) (2)P/N 290 977 480 (ring)

F01B2D4


754

759

761

762

Engine lifting deviceNot sold by BombardierDo it yourselfRefer to Shop Manual section03-03

F01D0A4

APPLICATIONAll models except 787.

Feeler gauge 45°Not sold by Bombardier

Snap-onFB 300 A

F01B1K4


Terminal removerNot sold by Bombardier

Snap-onTT 600-4

F01B1J4


Slide hammer pullerNot sold by Bombardier

Snap-on: Handle CJ93-1Hammer CJ125-6Claws CJ93-4

F01J0Z4


NOTE: This tool is also used topull out impeller shaft seal.

Protective matP/N 295 000 128

F02B0A4


889


219 200 106 PAGE 9 OF 19

ENGINE (continued) — OPTIONAL SERVICE TOOLS

Safety lanyard switch toolP/N 295 000 121

F01B244

APPLICATIONModels equipped with the DESS.

A) Four-pin magneto harnessP/N 295 000 131

B) Six-pin magneto harnessP/N 295 000 136

F01B284

APPLICATION

A) 587, 657 and 717,1995 and newer.

B) 787 engine.

Rotary valve shaft pusherP/N 290 876 609

F01B2B4


775

763

755

757

HandleP/N 290 877 650

A00C3V4


Exhaust outlet toolP/N 295 000 132

F01B2A4

APPLICATIONExhaust nut on transom.

Gear/bearing pullerP/N 290 877 665

F04B034


758

831

765

Crankshaft protectorP/N 420 876 552

F00B034

APPLICATIONFor use with pullers.

764


OF 19 219 200 106

COOLING/FUEL/OIL SYSTEMS — OPTIONAL SERVICE TOOLS

Pump gauge tester(carburetor)P/N 295 000 114

F01B0X4


ScrewdriverNot sold by Bombardier

Snap-onSDD-143

F01B1P4


Lighted adjustable mirrorNot sold by Bombardier

Snap-on50101

F01B1I4


826

35

4

3252

151

5

60

50

40

30

20

10

Hose pincherP/N 529 032 500

(TYPICAL)

F01B234

APPLICATIONAll engines.

Spring compressorP/N 529 027 100

A01B4O4

APPLICATIONHX and XP (5662).

Suspension adjustmentwrenchP/N 529 012 200

A25A014

APPLICATIONHX and XP (5662).

773

NEW

833

Flush kitP/N 295 500 068

F01E014

APPLICATIONModels prior to 1992.

Flexible spout (oil)P/N 414 837 300

F04B044


564

834


219 200 106 PAGE 11 OF 19

PROPULSION SYSTEM — OPTIONAL SERVICE TOOLS

FittingP/N 295 000 086

F01B0Z4


Slide hammer pullerNot sold by Bombardier

Snap-on: Handle CJ93-1

Hammer CJ125-6

Claws CJ93-4

F01J0Z4


NOTE: This tool is also used toremove rotary valve shaft bearing.

HacksawNot sold by Bombardier

Snap-onHS3

F01B1M4


828 Machinist’s squareNot sold by Bombardier

Snap-onPMF 122

F02B064

APPLICATIONModels equipped with reverse (except GTI 5641 and GTX 5640/5642).

Fitting removerNot sold by BombardierDo it yourselfRefer to Shop Manual sub-section08-02

F01J2R4


Steering cable toolP/N 295 000 145

F01B2P4

APPLICATIONHX model.

Deep socket14 mm(9/16 in)

780

Jet pump bearing removerP/N 295 000 144

F01J114


Impeller housingremoverP/N 295 000 113

F01L2O4

APPLICATIONModels without a jet pump support.

781

829


OF 19 219 200 106

WATERCRAFT HANDLING — OPTIONAL SERVICE TOOLS

Dolly (with wheels)P/N 295 000 126

F01B014

Beach wheels(set of 2 wheels)P/N 295 000 005

F01B074

APPLICATIONDolly.

Tie-down with ratchet3.60 m (12 ft) longP/N 295 100 011


876

877

885

Lift kitA) P/N 295 100 012

B) P/N 295 100 013

F01B1N4

APPLICATION

A) SP and GS series, XP model(except 5662).

B) GT models.

Tie-down1.50 m (5 ft) longP/N 295 100 010

F00B014


879

880

884


219 200 106 PAGE 13 OF 19

SERVICE PRODUCTS 0NOTE: The numbers outlined in black (example: ) are reference to product numbers from other divi-sions (Ski-Doo Snowmobiles and/or Sea-Doo Jet Boats). Matching reference numbers indicate the sameproduct is being used, even if the part numbers are different.Loctite® is a trademark of Loctite™ Corporation.Dow Corning® is a trademark of Dow Corning Corporation.

1

Medium strengththreadlockerP/N 293 800 015

Loctite 242 (blue)(10 mL)

A00B324

APPLICATIONCylinder head screws.Tuned pipe nut and screws.Engine rubber mount screws.Armature plate screws.Magneto flywheel/crankshaft.Carburetor mount nuts/screws.Magneto coil screws.Impeller housing cover screws.Venturi/impeller housing screws.Intake grate screws.Engine support screws.Impeller housing/hull nuts.Steering nozzle screws.Reverse gate screws.

154

LOCTITELOCTITELOCTITE®®®

REMOVABLETHREADLOCKER 242

High strengththreadlockerP/N 293 800 005

Loctite 271 (red)(10 mL)

A00B2U4

APPLICATIONImpeller shaft thread.

High temperaturethreadlockerP/N 290 899 788

Loctite 648 (green)(5 g)

A00B3D4

APPLICATIONCrankcase/plug at end of rotary valve shaft.Magneto/ring gear.

155


271Adhesive Sealant

359

High temperature retainingcompoundP/N 293 800 039

Loctite 642(50 mL)

F00B024

APPLICATIONPress fit parts on crankshafts.

Retaining compoundP/N 413 703 100

Loctite RC/609 (green)(10 mL)

A00B2S4

APPLICATIONUsed for retaining bushings, bearings in slightly worn housing or on shaft.

155

RETAINING COMPOUND642

NET 1.69 FL .OZ. (50 ml)

LOCTITE

ASSURE

151


RC/609


OF 19 219 200 106

SERVICE PRODUCTS (continued)

General purpose instantadhesiveP/N 293 800 021

Loctite 495

A00B2V4

APPLICATIONRubber to metal bonding and most hard plastic.

Gasket stripperP/N 295 000 110

(500 mL)

F01B1W4

APPLICATIONMating surfaces of cylinders and crankcase.Crankcase halves.

373

935

WARNINGEXTREMELY FLAMMABLE

VAPOR HARMFULPOISON

GASKET STRIPPER295 000 110

500 ml

BOMBARDIER

SolventP/N 293 800 019

Loctite SafetySolvent 755

(12 oz)

A00B3M4

APPLICATIONImpeller shaft threads.Drive shaft splines.Impeller threads and splines.

Primer for gasket eliminatorP/N 293 800 041

Loctite764

A00B3N4

APPLICATIONCrankcase halves mating surfaces.Impeller shaft thread.Venturi/impeller housing mating surfaces.

157

158

Gasket eliminatorP/N 293 800 007

Loctite 515(50 mL)

A00B2T4

APPLICATIONCylinder sleeve/O-ring groove.Crankcase halves mating surface.Crankcase screws.

Gasket eliminatorP/N 293 800 038

Loctite 518(50 mL)

F01B124

APPLICATIONImpeller housing cover.Venturi/impeller housing.Impeller shaft seal.

Pipe sealantA) P/N 293 800 018B) P/N 293 800 013

A) Loctite 592 B) Loctite 567A) (50 mL) B) (250 mL)

A00B2W4

APPLICATIONPlug on impeller housing cover.Plastic fitting tool (P/N 295 000 086) on impeller housing cover.Cooling system fittings.

152

376

518

358

960


219 200 106 PAGE 15 OF 19


Hylomar sealantP/N 293 800 001

PL-32(100 g)

A00B3F4

APPLICATIONMulti-purpose gasket and jointing compound.

SealantP/N 293 530 011

Sikaflex 221(350 mL)

F01B1D4

APPLICATIONBaffle on applicable models.

Sikaflex primer 449P/N 293 530 012

(475 mL)

F01B1E4

APPLICATIONFor use with Sikaflex 221 sealant.

369

919

918

Heat resistant sealantP/N 413 709 200

Dow Corning 736(90 mL)

A00B3U4

APPLICATIONTuned pipe 787 engine.

SealantP/N 413 710 300

Loctite 179(80 mL)

APPLICATIONExhaust system 787 engine.

Gun KoteNot sold by Bombardier

Kal-GardCoating & Mfg. Corp.

APPLICATIONMagneto and armature plate.

Dielectric greaseP/N 293 550 004

Dow Corning(150 g)

F01B164

APPLICATIONBattery posts and cableconnectors.Thermosensor switch.

374

DOW CORNING ®

RTV Sealant736Heat Resistant Sealant

961

350

GreaseP/N 293 550 005

(400 g)

A00B2L4

APPLICATIONPTO flywheel.

Super lube greaseP/N 293 550 014

A00B474

APPLICATIONMulti-purpose lubricant.

LubricantNot sold by Bombardier

G.E. VersilubeG341M

orEsso Beacon 325

A00B1T4

APPLICATIONSliding surface of starter armature shaft splines.

924

932

SuperLube

PERMATEXINDUSTRIAL

R

R

Synthetic Lubricant

Multi-Purpose

With Teflon

Net Wt. 14.5 Oz. (411g)

R


OF 19 219 200 106


Synthetic greaseP/N 293 550 010

(400 g)

F01B154

APPLICATIONCylinder and cylinder head screws.Carburetor linkage.Impeller shaft seal lips.Drive shaft/impeller splines.PTO flywheel.

Anti-seize lubricantP/N 293 800 023

Loctite anti-seizelubricant

12 oz (454 g)

F01B174

APPLICATIONCrankshaft thread/PTO flywheel.Crankshaft bearing seat.Spark plug threads.Magneto housing cover screws.

912

SYNTHETIC GREASE

362

Bombardier lubeP/N 293 600 016

(12 x 14 oz)

F01B0S4

APPLICATIONThrottle cable.Wear ring (when new).Corroded parts.Engine.Storage.

Sea-Doo fuel stabilizerP/N 413 408 600

(8 oz)

A00B3V4

APPLICATIONFuel system.

913

BOMBARDIERLUBE

340 g

DANGER

BOMBARDIER INC.Sea-Doo / Ski-Doo Division

Valcourt, Québec, Canada J0E 2LO

NEW!

upside down!Sprays

REPLACES SEA-DOO LUBEANTICORROSIVE LUBRICANT

Excellent for salt water andhigh humidity environments

FLAMMABLECONTAINER MAY EXPLODE IF HEATED.

DIRECT INHALATION OF SPRAY

MAY BE HARMFUL.

375

FUELSTABILIZER

NEW

®

®

Bombardier-Rotaxinjection oilP/N 413 802 900

(12 x 1 L)

F01B184


Bombardier-Rotax injection oilP/N 413 803 000(3 x 4 L)P/N 413 803 200(205 L)

F01B2H4


915

®

®

Two-stroke

Injection Oil

®

BOMBARDIER

1 U.S. quart

916

962

®

®

®


219 200 106 PAGE 17 OF 19


Bombardier-Rotax Formula XP-Ssynthetic injection oilP/N 413 711 000 (3 x 4 L)P/N 413 710 700 (205 L)

F01B354


Bombardier-RotaxFormula XP-S syntheticinjection oilP/N 413 710 500 (12 x 1 L)

F01B2G4


Jet pump oilP/N 293 600 011(12 x 6 oz)

Sea-Doosynthetic jet pump oil

F01B0P4


969

970

®

Injection Oil4 U.S. quart

®

®

BOMBARDIER

Two-stroke

Two-Stroke OilSYNTHETIQUE

FORMULA XP-S

937

Two-Stroke Oil

1 liter (1.05 U.S. qt)

Synthetic

®

BOMBARDIER

FORMULA XP-S

914

®

JET PUMP SYNTHETIC OIL

A) Silicone “Ultra Black”P/N 293 800 030

B) Silicone“Ultra Black HB”P/N 293 800 028

Loctite 598(300 mL)

F01B1A4

APPLICATIONRiding plate, deflector, jet pump support.Jet pump (on applicable models).

732 Multi-purpose sealantP/N 293 800 006

Dow Corning (90 mL)(clear)

F01B1C4

APPLICATIONRiding plate screw.

Sealant adhesiveP/N 293 800 033

Adchem 4511(clear)

F01B1S4

APPLICATIONRiding plate screw.Sponsons.

901

902

917

934

LAESDA

AD

CHEM

SCELLANT ADHÉSIF PREMIÈRE QUALITÉ PREMIUM SEALANT ADHESIVE

Adhesive activatorP/N 293 530 036

(250 mL)

F01B1Z4

APPLICATIONDecals.

Sea-Doo CleanerP/N 293 110 001 (400 g)P/N 293 110 002 (4 L)

F01B2J4


931

ACTIVEUR D'ADHÉSIF

250 mL

POUR L'APPLICATION DE MOULURE

ET VINYLES SENSIBLES À LA PRESSION

LORSQU'UNE MEILLEUREADHÉRENCE EST NÉCESSAIRE.

DANGER-ÉVITER TOUT CONTACT PROLONGÉ AVEC LA PEAU

LAVER À L'EAU FROIDE EN CAS DE CONTACT.

-UTILISER DANS UN ENDROIT BIEN AÉRÉ.

-TENIR LE CONTENANT BIEN FERMÉ.

-GARDEZ HORS DE LA PORTÉE DES ENFANTS.

-CONTIENT DU TRICHLORETYLÈNE.

-AVERTISSEMENT ! L'INHALATION DE CE PRODUIT

EST NOCIF.

N/P 293 530 036 FABRIQUÉ AU

946

947

BOMBARDIER

CLEANER

DANGER

400 g

EXTREMELY FLAMMABLE.HARMFUL OR FATAL IF SWALLOWED.

VAPOUR HARMFUL.293 110 002

DANGER4 L

BOMBARDIERBOMBARDIER


OF 19 219 200 106


Spray paint for metallic parts onlyA) White (140 g)

P/N 293 500 029B) Purple (140 g)

P/N 293 500 020C) Yellow (140 g)

P/N 293 500 008D) Charcoal (140 g)

P/N 293 500 030E) Grey (140 g)

P/N 293 500 009F) Blue (140 g)

P/N 293 500 014G) Blue/Violet (140 g)

P/N 293 500 077Sea-Doo

paint

F01B0Q4

APPLICATION

A) 1992 engines and later.B) Tuned pipe and muffler.C) 1991 engines and prior.D) Tuned pipe, muffler and flame

arrester.E) Tuned pipe, muffler and flame

arrester.F) Tuned pipe, muffler and flame

arrester.G) Tuned pipe, muffler and flame

arrester.

926

930

925

927

928

929

957

SMC spray paintA) Teal

P/N 293 500 068B) Yellow (140 g)

P/N 293 500 078C) Lavender (140 g)

P/N 293 500 059D) Magenta (140 g)

P/N 293 500 060E) Blue (140 g)

P/N 293 500 073Sea-Doo paint for SMC

F01B0Q4

APPLICATIONStorage cover.A) GTS 1994-95.B) GTI 1996-97.C) GTS 1992-1993.D) GTX 1992-1993.E) GT 1991.

941

949

950

951

955

Sea-Doo spray paint for gelcoatA) Teal

P/N 293 500 063B) Green (140 g)

P/N 293 500 062C) Turquoise

P/N 293 500 066D) Light grey

P/N 293 500 067E) Grey (140 g)

P/N 293 500 040F) White (140 g)

P/N 293 500 041G) Purple (140 g)

P/N 293 500 042H) Rhodamine (140 g)

P/N 293 500 083I) Super white (140 g)

P/N 293 500 082J) Indigo blue (140 g)

P/N 293 500 102K) Yellow (140 g)

P/N 293 500 078L) Dark green (140 g)

P/N 293 500 101

F01B1Q4

APPLICATION

A) SPX 1994-95.B) XP 1993-94.C) SPX 1993.D) SP/SPI 1993.E) SP 1990-91-92 and GT 1990-91.F) 1993-94 models.G) XP 1991-92.H) XP 800 1995.I) 1995 models and later.J) Hull GSX 1996.K) HX and XP 1995-96-97.L) Hull GTX 1996-97.

940

939

953

954

920

921

922

968

956

VERTICALFANSPRAYPATTERN

HORIZONTALFANSPRAYPATTERN

ROTATEVALVENOZZLE 1/4TURN TOCHANGESPRAYPATTERN

Danvern Fanspray® - A Sprayon Exclusive Feature

DANGERDANGER

GELCOATPAINT

POUR

PEINTURE


219 200 106 PAGE 19 OF 19


Gelcoat (liquid)A) Super white (1 L)

P/N 293 500 075B) White (1 L)

P/N 293 500 033C) Mauve (1 L)

P/N 293 500 034D) Grey (1 L)

P/N 293 500 035E) Light grey

P/N 293 500 037F) Green (1 L)

P/N 293 500 038G) Turquoise (1 L)

P/N 293 500 039H) Teal (1 L)

P/N 293 500 069I) Yellow (1 L)

P/N 293 500 081J) Marine green (1 L)

P/N 293 500 097K) Indigo blue (1 L)

P/N 293 500 098L) Yellow (1 L)

P/N 293 500 099M) Dark green (1 L)

P/N 293 500 100

APPLICATION

A) 1995 models and later.B) 1993-94 models.C) XP 1991-92.D) SP 1990-91-92 and GT 1990-91.E) SP/SPI 1995.F) XP 1993-94.G) SPX 1993.H) SPX 1994-95.I) HX, XP 800 1995 and

XP 1995-96-97.J) SPX 1996.K) Hull GSX 1996.L) HX and XP 1995-96-97.M) Hull GTX 1996-97.

943

906

907

908

909

910

911

938

963

Seat paint (green)P/N 293 500 061

Spray 140gF01B0Q4

APPLICATIONXP model 1993-94.

Gelcoat repair kitA) P/N 295 500 430B) P/N 295 500 340C) P/N 295 500 216D) P/N 295 500 100E) P/N 295 500 009

F01B0R4

APPLICATION

A) All 1997 models.B) All 1996 models.C) All 1995 models.D) 1993-94 models.E) 1992 and prior models.

952

945

904

903

Gelcoat paste (white)P/N 293 500 016

(10 oz)

F01B1F4

APPLICATIONModels prior to 1995.

905


1997 SeaDoo Tool Booklet - SeaDoo...

Documents

Transcript of 1997 SeaDoo Tool Booklet - SeaDoo...