1258-SERIES Electrically Operated Plastic Butterfly Valve Technical Specifications

Data Sheet Ref. No : SU-1258-00002

SUDE PUNE / BANGALORE

MODEL NO.: 1258\200\WAF\PVC\PVC\E\PN16\ ONF\SD-4000-20-E\2LS

Quotation Ref. No. Quotation Date :

1. ITEM Assembly Of 2 Way Plastic Butterfly Valve Fitted With Sdtork Make 3 Phase Electrical Actuator.

2. MAKE SUDE 3 APPLICATION 6 TECHNICAL SPECIFICATION OF 2 WAY BUTTERFLY VALVE Valve Size 200mm

End connection Wafer, Flangeless Suitable for Holding between flanges

Body Material PVC

Disc Material PVC

Seating material EPDM

Flowing medium Chemical

Pressure 10 kg/cm2

Operating Angle 90*

Type of design PN16 Construction

Temperature Ambient

Characteristic On/Off Type

Fitted with

Sdtork Make Three Phase Electrical Reversible Stay put Type Actuator, Supply Voltage: 415 volts 3 Phase AC Actuator is in built with Local Position Indicator & Hand Wheel For manual Operation. Type Of Actuator: Splash Proof Direct on Valve, IP67 Construction. Supply Voltage: 415 volts 3 Phase AC.

3. ACTUATOR DETAILS

4.1 Series

4000

4.2 Model SD-4000-20-E

4.3 Out Put motion. Quarter Turn

4.4 Rated output Torque – Kg-m

4.5 Effective Output Speed-RPM

4.6 Output coupling

4.7 Diameter of stem

4.8 Stroke 0 - 90˚

4.9 Time of operations – Sec /90˚

4.10 Manual over-ride

Provided-Hand wheel with auto declutching arrangement

4.11 Travel Limit Switches

Qty : 2 nos., Contacts : Rating: 5A-250 VAC/0.46A-250VDC.

4.12 Torque Limit Switches.

Qty : 2 nos., Contacts : Rating: 5A-250 VAC/0.46A-250VDC.

4.13 Local Position Indicator.

Provided Continuous type.

4.14 Class of Protection.

IP67

4.15 Duty

4.16 Weight of the actuator.

4.17 Mounting Dimensions

4.18

Area of Operation

4.19

Wiring Diagram

5 MOTOR DETAILS

5.1 Type. TEFC Induction Motor.

5.2 Supply 415 V AC 50 Hz 3 Phase

5.3 Duty

5.4 Insulation Class F

5.5 Rating

5 OPTIONAL ACCESSORIES

5.1

Feedback Potentiometer

Out put : 100-235 Ohms Not Provided

5.2

Additional Limit Switches

Qty : 2 nos. Type : 1 NO + 1 NC, Change over contact, Contact rating: 5 A, 230VAC

Provided

5.3

Two Wire Transmitter Type : Two wire, Actuator mounted Supply : 12-36 VDC, Output : 4-20 m A

Not Provided

5.4

Remote Position indicator

Available in servo controller Digital : 0-100 %

Not Provided

5.5

Servo controller (Valve positioner) Panel Mounted

Input signal : 4-20 m A, Output : 4-20 m A Feed back : 0-500 Ohms, supply 230 V AC, This will have auto calibration facility.

Not Provided

5.6 Interface Card Actuator Mounted

Input signal : 4-20 m A, Feed back : 100-235 Ohms,

Not Provided

5.6 Control Panel / Integral Starter

Refer Basic Specification Sheet Not Provided

5.7 Local Push Button Station

Refer Basic Specification Sheet Not Provided

5.8

Space Heater Not Provided

5.9

Thermostat Not Provided

6. GENERAL POINTS

6.1 Scope Of Supply Actuator with above accessories

6.2 Inspection

By the Customer at our works

6.3 Test Certificates & Manuals

2 Sets with Unit

6.4 Warranty 18 months from the date of supply or 12 months from the date of installation whichever is earlier.

6.5 Painting RAL 5021

6.6 Packing Wooden Box packing – On demand

SPECIAL NOTES: