11-05_FLEX
-
Upload
aleksandar-jocic -
Category
Documents
-
view
214 -
download
0
Transcript of 11-05_FLEX
-
8/13/2019 11-05_FLEX
1/4
ood's Powr-Grip Co., Inc.08 West Main - P.O. Box 368
aurel, Montana 59044 U.S.A.
406.628.8231 (phone)
406.628.8354 (fax)
800.548.7341
www.powrgrip.com
EST. 1964
THE ORIGINAL
& TRUSTED NAME
N VACUUM LIFTING
EQUIPMENT
FLEX2HV1100 lbs [270 kg]
FLEX3HV1100 lbs [410 kg]
FLEX4HV11FLEXR4HV11200 lbs [545 kg]
FLEX5HV11FLEXR6HV11
500 lbs [680 kg]
FLEX FLAT LIFTERS
Rev. 2.1/ 04-12 Spec. Sheet 11-5
S2008
CE T FICT
ION
R IA
SProducts are manufactured under an
ISO 9001 quality management system
Standard Pad Spread(Applies to FLEX 2 and FLEX3 models)
Min.: 11" x 37" [279 x 940 mm]
Max.: 11" x 59" [279 x 1499 mm]
Number / Size of Pads 2 / 10" [25 cm] diameter, lipped
Load Capacity
(On smooth, nonporous surfaces.
Please contact us for recommendations
on other surfaces.)
600 lbs [270 kg]
Unit Weight 74 lbs [34 kg] with Air power system (approximately)
114 lbs [52 kg] with AC power system (approximately)
162 lbs [74 kg] with DC power system (approximately)
Load Movement Flat to flat
Standard Features Movable pad mounts
Spring-mounted pads
Vacuum reserve tank
Vacuum line filter
Vacuum gauge
Power Systems
(See Available Power Systems for speci-
fications.)
AC power system (FLEX2HV11AC)
DC power system (FLEX2HV11DC)
Air (venturi) power system (FLEX2HV11AIR)
Available Options Movable control pendant (EO9RP)
12-Volt/DC vacuum backup system (EO1DCB)
Closed cell foam pad rings (FRHV11)
Vacuum loss warning buzzer (EO3VLW)
Individual pad shutoffs (CM1COWB)
Sliding pad mounts (CM4SL)
Sliding adjustable pad mounts (CM4SLA)
Spring-shaft pad mounts (CM5SP)
Sliding spring-shaft pad mounts (CM5SPSL)
Sliding adjustable spring-shaft pad mounts (CM5SPSLA)Extensions for movable pad mounts (CM6MEVL)
Voltage adaptation (EO6VA)
Parking stands / control handles (CF6PSCH)
Alternative pads:
(Specifications not as listed above.
Please contact us for more information.)
10" [25 cm] dia. concave (G0750)
11" [28 cm] dia. lipped (G3370)
Alternative frame dimensions and configurations
Design Standards
(See www.powrgrip.com for more
information.)
ASME B30.20 - 2006
(BTH-1 Design Category "B", Service Class "0")
ood's Powr-Grip products are sold
through authorized dealers.
Environmental conditions can affect product performance and longevity; consult the product instructions on
www.powrgrip.com or contact a Technical Sales Representative for more information.Based on product information at time of publication.
This flexible vacuum lifter from Wood's Powr-Grip
features a single beam, movable vacuum pads and your
choice of AC, DC or compressed air power.
Shown with AC Power System,
optional Frame Configuration and optional Sliding
Adjustable Pad Mounts
-
8/13/2019 11-05_FLEX
2/4
AVAILABLE POWER SYSTEMS
* Approximate times are based on FLEX5HV11 lifter.
AIR POWER SYSTEMS
Standard Operating
Power
Compressed Air, 5 SCFM [142 Iiters/min] @ 80-150
psi [550-1035 kPa]
Vacuum Pump Single-stage venturi type, 3 SCFM [85 liters/min]
nominal airflow
Apply 4 seconds (approximately)*Release 2 second (approximately)*
Standard Feature Blow-off for quick release
OPTIONAL HIGH-FLOW POWER SYSTEM
Operating Power Compressed Air, 8 SCFM [227 Iiters/min] @ 80-150
psi [550-1035 kPa]
Vacuum Pump Single-stage venturi type, 4 SCFM [113 liters/min]
nominal airflow
Apply 2 seconds (approximately)*
Release 2 seconds (approximately)*
Standard Feature Blow-off for quick release
AC POWER SYSTEM
Standard Operating
Power
120 volts AC, 50/60 hertz, 6 amps
(240 volts AC, 50/60 hertz, 3 amps also available)
Vacuum Pump Rotary vane type, 4 SCFM [113 liters/min] nominal
airflow
Apply 2 seconds (approximately)*
Release 4 second (approximately)*
Standard Features Green lift lightTwist-lock electrical plug
Blow-off for quick release
DC POWER SYSTEM
Standard Operating
Power
12 volts DC, 26 amps
Vacuum Pump Diaphragm type, 3 SCFM [85 liters/min] nominal
airflow
Apply 4 seconds (approximately)*
Release 4 second (approximately)*
Standard Features On-board battery and charger
Battery energy gauge
Low vacuum warning light
Blow-off for quick release
-
8/13/2019 11-05_FLEX
3/4
FLEX2HV11
Variable Pad Spread with
longest beam length
Min.: 11" x 37" [279 x 940 mm]
Max.: 11" x 107" [279 x 2718 mm]
Number / Size of Pads 2 / 10" [25 cm] dia. lipped
Load Capacity
(On smooth, nonporous
surfaces. Please contact
us for recommendations
on other surfaces.)
600 lbs [270 kg]
Unit Weight 74 lbs [34 kg]
with Air power system (approximately)
114 lbs [52 kg]
with AC power system (approximately)
162 lbs [74 kg]
with DC power system (approximately)
OPTIONAL FRAME CONFIGURATIONS
Center Padon FLEX3
only
Center Padon FLEX5
only
FLEX3HV11
Variable Pad Spread with
longest beam length
Min.: 11" x 37" [279 x 940 mm]
Max.: 11" x 107" [279 x 2718 mm]
Number / Size of Pads 3 / 10" [25 cm] dia. l ipped
Load Capacity
(On smooth, nonporous
surfaces. Please contact
us for recommendations
on other surfaces.)
900 lbs [410 kg]
Unit Weight 81 lbs [37 kg]
with Air power system (approximately)
120 lbs [55 kg]
with AC power system (approximately)
169 lbs [77 kg]
with DC power system (approximately)
FLEX4HV11
Variable Pad Spread with
longest beam length
Min.: 11" x 63" [279 x 1600 mm]
Max.: 11" x 89" [279 x 2261 mm]
Number / Size of Pads 4 / 10" [25 cm] dia. lipped
Load Capacity
(On smooth, nonporous
surfaces. Please contact
us for recommendations
on other surfaces.)
1200 lbs [545 kg]
Unit Weight 83 lbs [38 kg]
with Air power system (approximately)
123 lbs [56 kg]
with AC power system (approximately)
171 lbs [78 kg]
with DC power system (approximately)
FLEX5HV11
Variable Pad Spread with
longest beam length
Min.: 11" x 63" [279 x 1600 mm]
Max.: 11" x 89" [279 x 2261 mm]
Number / Size of Pads 5 / 10" [25 cm] dia. l ipped
Load Capacity
(On smooth, nonporous
surfaces. Please contact
us for recommendations
on other surfaces.)
1500 lbs [680 kg]
Unit Weight 90 lbs [41 kg]
with Air power system (approximately)
129 lbs [59 kg]
with AC power system (approximately)
178 lbs [81 kg]
with DC power system (approximately)
-
8/13/2019 11-05_FLEX
4/4
This flexible vacuum lifter from Wood's Powr-Gripfeatures a single beam with sliding cross arms,
movable vacuum pads and your choice of AC, DCor compressed air power.
Model FLEXR6HV11AIR shown.
FLEXR4HV11
Standard Variable Pad Spread Min.: 23" x 54-1/4" [584 x 1378 mm]
Max.: 41" x 70-1/4" [1041 x 1784 mm]
Number / Size of Pads 4 / 10" [25 cm] dia. lippedLoad Capacity
(On smooth, nonporous
surfaces. Please contact us
for recommendations
on other surfaces.)
1200 lbs [545 kg]
Unit Weight 96 lbs [44 kg]
with Air power system (approximately)
135 lbs [62 kg]
with AC power system (approximately)
184 lbs [84 kg]
with DC power system (approximately)
FLEXR6HV11
Standard Variable Pad Spread Min.: 23" x 54-1/4" [584 x 1378 mm
Max.: 41" x 70-1/4" [1041 x 1784 m
Number / Size of Pads 6 / 10" [25 cm] dia. lippedLoad Capacity
(On smooth, nonporous
surfaces. Please contact us
for recommendations
on other surfaces.)
1500 lbs [680 kg]
Unit Weight 116 lbs [53 kg]
with Air power system (approximate
155 lbs [71 kg]
with AC power system (approximate
204 lbs [93 kg]
with DC power system (approximate