performance testing

HYDRAULIC FLOW 1000L/hr, 24hrs, 5days.Surge (5 minutes ON: 10 minutes OFF)

OIL DOSE RATE 50L/day, Final Oil Volume = 250LContinuous

TEST TEMPERATURE >35°CThermostatically Controlled

RESULTS Traps over 90% of oil and solids(when maintained correctly)

1000L Polymer Grease Arrestor AUTHORITY APPROVALS

1

DrainageSolutions

InteriorProducts

Environmental Civil & Commercial

proDUct Variations

above ground 1000L polymer grease arrestor with class a lid | ei code: 80500Below ground 1000L polymer grease arrestor with class B lid | ei code: 80501Below ground 1000L polymer grease arrestor with class D lid | ei code: 80502

Pictured 80500

eVerHarD inDUstriesABN: 41 009 690 859

everhard.com.au | 131 926Head office: 405 Newman Rd, Geebung, QLD, 4034

2

DrainageSolutions

InteriorProducts

Environmental Civil & Commercial

featUres anD Benefits

• Passive separation using internally moulded baffle walls• No filters mean no blockages• Above and below ground models available• Above ground model weighs approximately 130kg• Passes AS/NZS1546.1:2008 Side Load Test• Registered design• Australian made

easiLY transporteD

Everhard's 1000L Polymer Grease Arrestor's compact size and relatively low weight means easy delivery and placement on site. The Arrestor fits through standard door or passageways and will not take up valuable space in basements or car parks. Once on site the arrestor can be easily handled and manoeuvred without the need for machinery.

aciD resistant

The polyethylene material used in the construction of the arrestor is extremely resistant to the aggressive acids contained in oil and fat laden wastewater. This resistance provides the arrestor with a very long life expectancy unlike arrestors manufactured from other materials such as steel and concrete.

oDoUr tigHt

The covers provide a complete seal making the polymer grease arrestor gas- and water- tight.

DUraBLe

Polyethylene guarantees a high durability against dents, cracks or breaks in the material.

easY to cLean

The smooth wax-like surface of the arrestor hinders the build up of coagulated oils and fats. This allows for quick and easy cleaning of the arrestor with minimal use of rinse water.

recYcLaBLe materiaL

Polyethylene can be fully recycled and reused for the production of high quality products.

coUnciL approVeD

In-house test results of the 1000L Polymer Grease Arrestor pass criteria se via national product appraisal schemes and this has resulted in it being approved for use by a growing number of councils and authorities in regions throughout Australia. Sydney Water, Queensland Urban Utilities and Unity Water have given their approval with many councils following suit. Visit everhard.com.au to download the full list of Authority Approvals.

WarrantY

Everhard Industries guarantees the 1000L Polymer Grease Arrestor for 15 years on all polymer components and 5 years on parts.

For more information contact 131 926

eVerHarD inDUstriesABN: 41 009 690 859

everhard.com.au | 131 926Head office: 405 Newman Rd, Geebung, QLD, 4034

3

version: 002

DrainageSolutions

InteriorProducts

Environmental Civil & Commercial

tecHnicaL DraWings

Disclaimer: All measurements are in millimeres and are solely for reference purposes. Any changes resulting from technical advance of design or other alternations may be made without prior notice. Installation instructions and information on warranties is available at everhard.com.au

Product Code Description Installation Capacity Inlet Height Weight (kg)

80500 Free-standing polymer grease arrestor with polymer odour-tight Class A

cover and PE-HD DN100mm inlet and outlet connections

Above ground 1000L 1080mm 130

Product Code Description Installation Capacity Inlet Height Weight (kg)

80501 Below ground Polymer arrestor, closed gas-tight cast iron Class B lid and

PE-HD DN100mm inlet and outlet connections

Below ground 1000L 520mm 175

80502 Below ground Polymer arrestor, closed gas-tight cast iron Class D lid and

PE-HD DN100mm inlet and outlet connections

Below ground 1000L 545mm 195