100043 - Sheet1ANGULAR: ± 1 63 DAIRYLAND ELECTRICAL INDUSTRIES, INC. P.O. BOX 187 STOUGHTON, WI...

P.O. BOX 187STOUGHTON, WI 53589608-877-9900 DAIRYLAND.COM

DAIRYLAND ELECTRICALINDUSTRIES, INC.

63

ASME Y14.5M 2018 APPLIES

6

6

66

66

ASSEMBLE THE TWO NUTS ON EACH U-BOLT AS ILLUSTRATED AND TIGHTEN SECURELY.

WHEN A PCR IS ORDERED FOR A PIPE MOUNT INSTALLATION, IT WILL BE FURNISHED WITH THE BACKPLATE INSTALLED. WHEN THE PMK2 KIT IS ORDERED SEPARATELY, INSTALL IT WITH THE HARDWARE FURNISHED AS ILLUSTRATED AND TIGHTEN EACH NUT SECURELY.

1 5

23

4

KIT #: 2014, DOCUMENT NAME: PMK2 PCR

LINE NO. DOCUMENT NUMBER DESCRIPTION QTY.1 1811 BACKPLATE PCR-3.7-15KA 12 1013 WASHER FLAT 1/4" 43 1014 WASHER SPLIT LOCK 1/4" 44 1015 NUT HEX 1/4-20 45 1554 SCREW PH TRUSS HD 1/4-20X5/8" 46 1940 U-BOLT 3/8'' FOR 2'' IPS PIPE 2

REV: D

.XXX = .005"

.XX = .01"

.X = .03"ANGLES = 1

UNLESS OTHERWISE SPECIFIED DIMENSIONS ARE IN INCHES.

COMPUTER-GENERATED DRAWING DO NOT EDIT MANUALLY. TITLE:

THE INFORMATION CONTAINED IN THIS DRAWING IS THE SOLE PROPERTY OF DIARYLAND ELECTRICAL INDUSTRIES, INC. ANY REPRODUCTION IN PART OR WHOLE, WITHOUT THE WRITTEN PERMISSION OF DIARYLAND

ELECTRICAL INDUSTRIES, INC. IS PROHIBITED.

SHEET: SCALE:DWG SIZE:

DATE DRAWN:

PART #:

PMK INSTALLATION PMK

1000431 B 1:3

DRAWN:

OF5

JPW 2014-01-13DWG APPROVAL: DATE APPROVAL:

JVW 2019-03-07

MATERIAL:

FINISH:

SEE BOM

NONE



63


ASSEMBLE THE TWO NUTS ON EACH U-BOLT AS ILLUSTRATED AND TIGHTEN SECURELY.

1

1

3

2

KIT #: 3071, DOCUMENT NAME: PMK2 PCRH

LINE NO. DOCUMENT NUMBER DESCRIPTION QTY.1 1940 U-BOLT 0.375'' FOR 2'' IPS PIPE 22 1010 WASHER FLAT 3/8 83 1055 WASHER SPLIT LOCK 3/8" 8

REV: D

.XXX = .005"

.XX = .01"

.X = .03"ANGLES = 1






DATE DRAWN:

PART #:

PMK-48 PCRH

1000432 B 1:4

DRAWN:

OF5


JVW 2019-03-07

MATERIAL:

FINISH:

SEE BOM

NONE



63


B

52

3

4

1

6

7

9

8

7

INSTALL THE PCR AS

ILLUSTRATED ON PAGE 1

A

7

8

9

KIT #: 1946, DOCUMENT NAME: PMK2-48 FOR PCR

Assemble the threaded pipe flange base onto one end of the 2” pipe.

Attach the (4) galvanized anchor bolts to the pipe flange base as illustrated, with a nut above and below the base, and securely tighten each nut.

Prepare the forms for a concrete base of the desired size and fill with cement.

When the cement is firm enough to support the pipe, insert the (4) anchor bolts into the cement so there is about a ½” gap between the bottom of the pipe flange and the top of the cement base. Assure that the pipe is vertical. Allow the cement to fully set up before installing the PCR.

When the cement is cured, verify that the pipe is vertical and if not, adjust the anchor bolt nuts accordingly to make the pipe vertical.

Assemble the two nuts on each U-bolt as illustrated and tighten securely. When a PCR is ordered for a pipe mount installation, it will be furnished with the backplate installed.

LINE NO. DOCUMENT NUMBER DESCRIPTION QTY1 1811 BACKPLATE PCR-3.7-15KA 12 1013 WASHER FLAT 1/4" 43 1014 WASHER SPLIT LOCK 1/4" 44 1015 NUT HEX 1/4-20 45 1554 SCREW PH TRUSS HD 1/4-20X5/8" 46 1940 U-BOLT 3/8'' FOR 2'' IPS PIPE 27 1942 PIPE STEEL THREADED GALVANIZE 2X48" 18 1943 FLANGE PIPE CAST IRON 2'' GALV 19 1944 SCREW MACHINE 5/8X12" GALVANIZED W 2 NUTS 4

REV: D

.XXX = .005"

.XX = .01"

.X = .03"ANGLES = 1






DATE DRAWN:

PART #:

PMK2-48 for PCR

1000433 B 1:4

DRAWN:

OF5


JVW 2019-03-07

MATERIAL:

FINISH:

NA

NA



63


1

2

KIT #: 2476, DOCUMENT NAME: PMK2-48 FOR PCRH

Assemble the threaded pipe flange base onto one end of the 2” pipe.

Attach the (4) galvanized anchor bolts to the pipe flange base as illustrated, with a nut above and below the base, and securely tighten each nut.

Prepare the forms for a concrete base of the desired size and fill with cement.

When the cement is firm enough to support the pipe, insert the (4) anchor bolts into the cement so there is about a ½” gap between the bottom of the pipe flange and the top of the cement base. Assure that the pipe is vertical. Allow the cement to fully set up before installing the PCRH.

When the cement is cured, verify that the pipe is vertical and if not, adjust the anchor bolt nuts accordingly to make the pipe vertical.

When a PCRH is ordered, it is always furnished with the base already installed. Mount the PCRH to the pipe with the two nuts on each U-bolt as illustrated and tighten securely.

B

B

LINE NO.

DOCUMENT NUMBER DESCRIPTION QTY.

1 1942 Pipe Steel Threaded Galvanize 2x48" 12 1940 U-Bolt 3/8'' for 2'' IPS Pipe 23 1943 Flange Pipe Cast Iron 2'' Galv 14 1944 Screw Machine 5/8x12" Galvanized w 2 Nuts 45 1010 Washer Flat 3/8 46 1055 Washer Split Lock 3/8" 4

REV: D

.XXX = .005"

.XX = .01"

.X = .03"ANGLES = 1






DATE DRAWN:

PART #:

PMK2-48 PCRH

1000434 B 1:4

DRAWN:

OF5


JVW 2019-03-07

MATERIAL:

FINISH:

NA

NA



63


1

2

3

4

7

5

9

10

8

WHEN THE PMK3 KIT IS ORDERED, INSTALL IT WITH THE HARDWARE FURNISHED AS ILLUSTRATED AND TIGHTEN EACH NUT SECURELY.

ITEM NO. PART NUMBER DESCRIPTION QTY1 1942 PIPE STEEL THREADED GALVANIZE 2X48" 12 1943 FLANGE PIPE CAST IRON 2'' GALV 13 1944 SCREW MACHINE 5/8X12" GALVANIZED W 2 NUTS 44 4607 BACKPLATE PCRX-5K-15KA 15 1940 U-BOLT 3/8'' FOR 2'' IPS PIPE 26 3683 HARDWARE KIT SSD/GI 5/16" 27 1193 SCREW HEX 5/16-18X0.625" 28 1195 WASHER SPLIT LOCK 5/16" 29 1194 WASHER FLAT 5/16" 210 1196 NUT HEX 5/16-18 2

REV: D

.XXX = .005"

.XX = .01"

.X = .03"ANGLES = 1






DATE DRAWN:

PART #:

PMK INSTALLATION FOR PCRX

1000435 B 1:8

DRAWN:

OF5


JVW 2019-03-07

MATERIAL:

FINISH:

SEE BOM

NONE

100043 - Sheet1ANGULAR: ± 1 63 DAIRYLAND ELECTRICAL INDUSTRIES, INC. P.O. BOX 187 STOUGHTON, WI...

Documents

Transcript of 100043 - Sheet1ANGULAR: ± 1 63 DAIRYLAND ELECTRICAL INDUSTRIES, INC. P.O. BOX 187 STOUGHTON, WI...