!!!!-Norka Light- For Food Industry

8/7/2019 !!!!-Norka Light- For Food Industry

1/6

Food industry

Working pits

Luminaires for

Ingress Protection IP69K

FULDA

BERN

BITBURG


2/6

-Luminaires for the food processing industry hygienic safe economic

broken glass metal parts chemical resistance mechanical resistance ingress protection up to IP 69K temperature (heat / cold) maintenance and cleaning

Application: Production sites and

sub-suppliers of the food and beverage industry

Production sites with increased ambienttemperatures

Cold rooms Working pits and maintenance areas

The demands on technology and equipment in production sites of the food and beverage industry and their sub-

suppliers are especially high and constantly increasing. Provisions to avoid any risk of health according to the

principals of the HACCP-concept (HazardAnalysis Critical Control Point) for hygienic in production, cleaning anddisinfection are assumed. HACCP is a key criteria of the IFS (International Food Standard) in the requirement to thequality system.

Since many years NORKA is prepared for the special requirements of the food and beverage industry, the mainte-

nance area of work pits and offers a number of luminaires to handle the following risks:

Ingress protection IP 69K andtest criteria of the ingress protection IP 69Kaccording to DIN 40050 / part 9

Definition of the second digit ( 9K )Brief description DefinitionProtection against ingress Water of 80C (= K), coming from any direction under

of water during strongly increased pressure (80 - 100bar) directed to the

high pressure cleaning luminaire body, may not have any harmful impact

Testing conditions second digit ( 9K )Testing of ingress of water

Testing device High pressure cleaner / flat die

Spraying angle 0-30-60-90Distance 100 - 150mm --> on turntable --> rpm (5 1) 1/min

Water throughput 14 - 16 L/min 5%

Water pressure 8000 - 10000 kPa (80 - 100bar)

Water temperature 80C 5C

Testing period 30 sec in each position

Definition of the first digit ( 6 )Brief description DefinitionDust tight Dust may not ingress

Testing conditions first digit ( 6 )Depression test with air/dustDepression 2kPa (20mbar)

Testing period 8 hours

Testing dust 50% chalk and 50% flue ash

Particle size separation 33 Weight proportions 32m /

67 Weight proportions > 32m, but 250m

NORKA-luminaires with ingress protection IP69K withstand

reliably the toughest cleaning process with high pressure cleaners

and aggressive cleaning and disinfection agents.

90

60

30

0

10 - 15 cm


3/6

BITBURGSingle lamp luminaire for maximum requirements

IP 66, IP 67, IP 69KIK 04, 650C PMMA

IK 09, 850C PC

Luminaire housing made of glass fibre reinforced polyester. Reflector

tube medium beam, PMMA impact strengthened transopal (standard

version). On request: PMMA impact strengthened clear, PMMA clear,

PMMA clear inside ribbed, reflector tube PMMA clear narrow or con-

centrated beam. PC on inquiry. Built-in Industrial ECG (100.000 hrs),

or low loss ballast and starter.

Product characteristics of luminaire BITBURG- Ingress protection IP 66, IP 67 and IP 69K

- Corrosion, acid and alkaline resistant

- UV-stable

- Ageing resistant and form retaining silicone/synthetic

rubber gaskets

- Short sealing system

- Luminaire can be rinsed from back side

- No visible chalk residues because of smooth surface

- Luminiare body and reflector tube can be recycled

- Industrial ECG (100.000 hrs)- Through wiring 4 x 1,5 mm

- Adjustable beam angle

- Easy fixation by 2 mounting brackets with flexible distance

- Re-lamping possible without tool by pressure caps with

stainless steel clips

Version Lamp Dimensions in mm 2 mm Weight Order no.type L B H a approx. kg transopal

1 x 36 W T8 1251 107 140 980 80 3,3 643 4701 x 58 W T8 1551 107 140 1280 80 4,2 643 6701 x 54 W T5 1200 107 140 930 80 2,6 643 7701 x 80 W T5 1500 107 140 1230 80 3,0 643 870

60

107

140

L

a~25 ~25

M20M20

400

600

LOR = 105%

BITBURG1 x 80 WNarrow beam, PMMA clear

60130

138

250

200

150

100

LOR = 96%

BITBURG 1 x 80 WMedium beam, PMMA transopal

60107

140

1300

700

200

LOR = 101%

BITBURG1 x 80 WConcentrated beam, PMMA clear

60173

159,5

*

* *available on request


4/6

FULDASingle lamp luminaire for working pits

IP 65, IP 69KIK 08, 650C PMMA

Luminaire housing made of glass fibre reinforced polyester.

Lamp cover, PMMA impact strengthened transopal (standard

version) with integrated mirror finish reflector, asymmetric

beam. On request: Lamp cover PMMA impact strengthened

clear. Built-in ECG, or low loss ballast and starter.

Product characteristics of luminaire FULDA- Ingress protection IP 65 and IP 69K

- Corrosion, acid, alkaline, fuel and lubricant resistant

- UV-stable

- Impact resistant

- Ageing resistant and form retaining silicone/synthetic

rubber gaskets


- Available with special coating for easy removal of

paint and dirt residues with standard graffiti cleaners


- Luminaire body and lamp cover can be recycled- Available with industrial ECG (100.000 hrs)

- Through wiring 2 x 1,5 mm

FULDA 1 x 58 WBeaming upwards, PMMA transopal

300

250

200

150

100

FULDA 1 x 58 WBeaming downwards, PMMA clear

300

400

200

Version Lamp Dimensions in mm 2 mm Weight Order no.type L B H a approx. kg transopal

1 x 18 W T8 707 123 165 475 4 2,4 540 2701 x 36 W T8 1317 123 165 1085 4 4,0 540 4701 x 58 W T8 1617 123 165 1385 4 5,3 540 6701 x 24 W T5 666 123 165 434 4 2,2 540 1701 x 21 W T5 966 123 165 734 4 3,5 540 1711 x 39 W T5 966 123 165 734 4 3,5 540 5701 x 28 W T5 1266 123 165 1034 4 4,0 540 070

1 x 54 W T5 1266 123 165 1034 4 4,0 540 7701 x 35 W T5 1566 123 165 1334 4 4,5 540 1751 x 49 W T5 1566 123 165 1334 4 4,5 540 9701 x 80 W T5 1566 123 165 1334 4 4,5 540 870

Version IP 69K to be ordered with luminaire 536 400

Lamp cover special coating on request

~25~25

6,2 a

L B

H

*

*available on request

Lamp coverSpecial coating

Impact resistant Fuel resistant Lubricant resistant


5/6

BERNSingle and twin lamp tubular luminaire 60 mm, suitable for working pits

IP 66, IP 67, IP 68 20 m, IP 69KIK 08, 650C PMMA

IK 10, 850C PC

Tubular luminaire made of PMMA impact strengthened

transopal (standard version) with integrated anodised

aluminium reflector. On request: PMMA clear or PC clear

impact resistant. Built-in ECG.

Product characteristics of luminaire BERN- Ingress protection IP 66, IP 67, IP 68 20 m and IP 69K

- Corrosion, acid and alkaline resistant

- UV-stable

- Quick mounting end caps


- Available with special coating for easy removal of

paint and dirt residues with standard graffiti cleaners


- Luminaire body and lamp cover can be recycled

- Easy fixation by 2 mounting brackets

with flexible distance

- Available with industrial ECG (100.000 hrs)- Available with through wiring up to 4 x 2,5 mm

LOR = 56%

BERN 1 x 58 WPMMA transopal

60

80

100

120

40

LOR = 83%

BERN 1 x 80 WPC clear

100

160

80

Version Lamp Dimensions in mm 2 mm Weight Order no.type L a approx. kg transopal

1 x 18 W T8 1095 60 960 50 2,0 536 271 x 36 W T8 1705 60 1570 50 2,8 536 471 x 58 W T8 2005 60 1870 50 3,0 536 671 x 39 W T5 1470 60 1335 50 2,5 536 371 x 54 W T5 1770 60 1635 50 3,0 536 571 x 49 W T5 2070 60 1935 50 3,3 536 771 x 80 W T5 2070 60 1935 50 3,3 536 87

1 x 24 W TC-L 790 60 655 50 1,6 536 071 x 36 W TC-L 885 60 750 50 1,7 536 171 x 55 W TC-L 1005 60 870 50 2,1 536 972 x 36 W TC-L 1349 60 1215 50 2,4 536 152 x 55 W TC-L 1788 60 1640 50 3,1 536 25

Version IP 69K to be ordered with luminaire 536 400

Lamp cover special coating on request

6,2(3x)3895

89,5

La

~25

60

~6

25M20

Lamp coverSpecial coating

*

* available on request


6/6

NORDDEUTSCHE KUNSTSTOFF-UND ELEKTROGESELLSCHAFTSTCKER MBH & CO. KG

Sportallee 822335 Hamburg / GERMANY

Postfach 63 02 6322312 Hamburg / GERMANY

Tel.: + 49 40 51 30 09 - 0Fax: + 49 40 51 30 09 - 28

[email protected]

65976

01.0

8

Wereservethe

righttomaketechnicalchangeswithoutnotice

Rely on today for

the next 30 years

!!!!-Norka Light- For Food Industry

Documents

Transcript of !!!!-Norka Light- For Food Industry