مؤسسة فلسطين الصناعية للأتمتة و التحكم ...System Description The...
Transcript of مؤسسة فلسطين الصناعية للأتمتة و التحكم ...System Description The...
Palestine Industrial Est. for
Automation & Electronic Control
Presents
Jordanian Design & Made
FARIS
Presentation for
Fire Arms Range Intelligent System
System Description
The system depends on using real bullets to shoot real targets, which can sustain big number of hits. These targets are at 100, 200 and 300 m away from shooters. The system determines the bullets locations on target and around by Shock Wave Sensors, then the results are processed and displayed on computer monitor at control room and at field display panels beside the shooters.
System Components
Control Room
Public Address System
Shooters Area
Targets Area that includes:
- 100 m targets with night effect simulator
- 200 m targets
- 300 m targets
Fire Range Components Overview
Components Photos
Targets Area (100, 200 & 300 m)
Components Photos
Targets Area (Back View)
Components Photos
Back view of a target which also illustrates shooters area
Components Photos Target mechanism. Also the picture indicates the night
effect simulator lamps
Components Photos Shooters area. Contains shooters’ holes and field display
panels.
Display Panel
Target Mechanism
Field Display Panel
This unit is installed on the left hand side of each hole to display real-time results
Electronic boards sample
Night Effect Simulation (NES)
Electronic boards sample Bullets location measuring board, using shock wave
measuring principle
Control Room Using the computer, the supervisor can:
Make system setup by which he choose
weapon type and shooting distance (as we will
illustrate later).
Detect the shooting result for each shooter
Call any shooter to give him the instructions
(via public address system)
Make printout of each shooter results
Maintenance technician can make full system
diagnostics by the computer Intelligent
Diagnostic System.
System Features
Computerized system with software to
operate the system and to display the
results in Arabic and English. Software
operates under Windows platform. It is
designed to collect results from 10 targets
at 100, 200 & 300 m.
System Features
Operate with all types of weapons
M16 Rifle
System Features
Kalashnikov Rifle
System Features
M 60 Machine Gun
System Features
Beretta Gun
System Features
The system is able to:
1.Accurately determines the hit locations on targets
2.Measures Extreme Spread for group of hits
3.Measures and plot center point for group of hits
4.Measures the standard deviation for hits
5.Calculates the number of hit and miss shots for each
shooter
6.Discards the hits as a result of Crossfire or Ricochet
System Features
7. Displays the scores and location of each shot at shooter field display
panel and on the control room computer as well.
8. Controls targets up / down motion
9. Makes system diagnostics to check the status of system main
components
10. Makes reports for each shooter results as well as the results of
group of shooters
System Features
Training types which can be conducted:
Grouping and Zeroing
Basic training
Sniper training
Machine Gun training
System Features
The system includes Night Effect Simulator,
with the following main features:
Targets continuous lighting
Flashing lights to simulate enemy shooting
Distinguished flash light in case of target direct
hit
System Features
Public Address System:
Central control unit allows the operator to speak to
every shooter privately, or to all shooters at the same
time via headphones
Voice amplifier system connected to loud speakers
Headphone for every shooter
Microphone at control room
Software
There are two monitors; Main and Auxiliary
Each monitor has ten fields, each for one shooting lane
Functions of Main display: – System setup for shooting
– System diagnostics
– System Control
Functions of Auxiliary display: – Displays shot locations on and around targets
– Displays the shot number next to shot location
– The last shot is distinguished by shape and color
Software
Main Menu
Software
Main Menu
The targets’ settings are done by "Setup Menu", the setup
includes:
– Weapon Brand
– Shooting Scheme
– Target Shape
– Number of Bullets
– Others, as illustrated in the following figure.
Tests which can be done:
- Self diagnostic test, which can be done at system start-up
- Manual test, where the operator can conduct this test
from specific menu.
Software
Software
Set-up menu
Software
Test Menu
Types oaf reports:
Shooter Report: One page for each shooter, contains a diagram which illustrates shot locations and numbers on and around target, including direct hits, ricochet and crossfire shots. All with total score.
Detailed Shooting Report: Detailed report that gives score and deviation for every shot for every shooter
General Report: Overall results for all shooters
Software
Shooting Reports
Reports Sample
Contact Information
Palestine Industrial Est. for
Automation & Electronic Control
P.O. Box: 850357
Amman 11185 Jordan
Tel: ++962 6 5824534
Fax: ++962 6 5829325
Web Site: www.palcocontrol.com