© 2012 Autodesk Concrete Modeling Using Revit Structure Shruti Harve Senior Application Specialist,...
-
Upload
stanley-warner -
Category
Documents
-
view
220 -
download
1
Transcript of © 2012 Autodesk Concrete Modeling Using Revit Structure Shruti Harve Senior Application Specialist,...
![Page 1: © 2012 Autodesk Concrete Modeling Using Revit Structure Shruti Harve Senior Application Specialist, Ideate,Inc.](https://reader036.fdocuments.net/reader036/viewer/2022062516/56649d955503460f94a7d161/html5/thumbnails/1.jpg)
© 2012 Autodesk
Concrete Modeling Using Revit Structure
Shruti HarveSenior Application Specialist, Ideate,Inc
![Page 2: © 2012 Autodesk Concrete Modeling Using Revit Structure Shruti Harve Senior Application Specialist, Ideate,Inc.](https://reader036.fdocuments.net/reader036/viewer/2022062516/56649d955503460f94a7d161/html5/thumbnails/2.jpg)
© 2012 Autodesk
House Keeping
• Please put your cell phones to silent mode
• Please make sure you don’t slam the door shut when leaving the presentation midway
• Questions: Please hold off till the end
![Page 3: © 2012 Autodesk Concrete Modeling Using Revit Structure Shruti Harve Senior Application Specialist, Ideate,Inc.](https://reader036.fdocuments.net/reader036/viewer/2022062516/56649d955503460f94a7d161/html5/thumbnails/3.jpg)
© 2012 Autodesk
Shruti Harve, MS, LEED AP
• Senior Application Specialist at Ideate, LEED AP
• Masters in Architecture with a concentration in Computing from University of Strathclyde in U.K.
• Experience working as a Designer, 3D Modeler, Drafter in Architectural and Engineering firms in the San Francisco Bay area, UK and India
• Revit User for over 7 years
• Train/Implement Building Information Modeling solutions for AEC firms in the Bay area
![Page 4: © 2012 Autodesk Concrete Modeling Using Revit Structure Shruti Harve Senior Application Specialist, Ideate,Inc.](https://reader036.fdocuments.net/reader036/viewer/2022062516/56649d955503460f94a7d161/html5/thumbnails/4.jpg)
© 2012 Autodesk
What best represents your role?
• Principal /Project Manager• Structural Engineers• CAD/BIM Specialists• CAD/BIM Manager• General Contractor/Design-Build Professional
![Page 5: © 2012 Autodesk Concrete Modeling Using Revit Structure Shruti Harve Senior Application Specialist, Ideate,Inc.](https://reader036.fdocuments.net/reader036/viewer/2022062516/56649d955503460f94a7d161/html5/thumbnails/5.jpg)
© 2012 Autodesk
Your experience with using Revit Structure?
• 0-2 years• 2-4 years• Over 4 years
![Page 6: © 2012 Autodesk Concrete Modeling Using Revit Structure Shruti Harve Senior Application Specialist, Ideate,Inc.](https://reader036.fdocuments.net/reader036/viewer/2022062516/56649d955503460f94a7d161/html5/thumbnails/6.jpg)
© 2012 Autodesk
‘Solid’ & ‘Concrete’ Modeling
This class focuses on learning the use of Solid and Surface modeling tools in Revit Structure to model structures built of Concrete & Precast Concrete
Class Summary
![Page 7: © 2012 Autodesk Concrete Modeling Using Revit Structure Shruti Harve Senior Application Specialist, Ideate,Inc.](https://reader036.fdocuments.net/reader036/viewer/2022062516/56649d955503460f94a7d161/html5/thumbnails/7.jpg)
© 2012 Autodesk
Learning Objectives
Quick Review: Solid & Surface Modeling tools
Concrete/Precast Concrete Components, Structures Precast Concrete Void Slab Precast Warped Double Tee Thin Shell Concrete Roof (Hyperbolic Paraboloid) Custom Rebar Shape; Rebar schedules
Tips and Tricks
Questions
![Page 8: © 2012 Autodesk Concrete Modeling Using Revit Structure Shruti Harve Senior Application Specialist, Ideate,Inc.](https://reader036.fdocuments.net/reader036/viewer/2022062516/56649d955503460f94a7d161/html5/thumbnails/8.jpg)
© 2012 Autodesk
Overview of Solid and Surface Modeling tools in Revit
![Page 9: © 2012 Autodesk Concrete Modeling Using Revit Structure Shruti Harve Senior Application Specialist, Ideate,Inc.](https://reader036.fdocuments.net/reader036/viewer/2022062516/56649d955503460f94a7d161/html5/thumbnails/9.jpg)
© 2012 Autodesk
Revit families are groups of elements of the same type. All theelements in a family have a common set of parameters,identical uses, and similar graphical representations.
System Component
Revit Families
•Beams
•Braces
•Columns
•Stiffeners
are created and edited solely within a project and depends on that project model.
•Walls
•Floors
•Roofs
•Ceilings
In-Place
![Page 10: © 2012 Autodesk Concrete Modeling Using Revit Structure Shruti Harve Senior Application Specialist, Ideate,Inc.](https://reader036.fdocuments.net/reader036/viewer/2022062516/56649d955503460f94a7d161/html5/thumbnails/10.jpg)
© 2012 Autodesk
Solid Modeling Tools for Families Create solid shapes that represent the overall form of the family
Five types of forms can be created
Solid Blend Solid Revolve Solid Sweep Solid Swept Blend
Solid Extrusion
![Page 11: © 2012 Autodesk Concrete Modeling Using Revit Structure Shruti Harve Senior Application Specialist, Ideate,Inc.](https://reader036.fdocuments.net/reader036/viewer/2022062516/56649d955503460f94a7d161/html5/thumbnails/11.jpg)
© 2012 Autodesk
Void Extrusion Void Blend
Void Revolve
Void Sweep
Void Swept Blend
Void Tools for Families Create subtractive solid shapes that form a void in the solid mass by subtracting
material away from the solid Five types of void forms can be created
![Page 12: © 2012 Autodesk Concrete Modeling Using Revit Structure Shruti Harve Senior Application Specialist, Ideate,Inc.](https://reader036.fdocuments.net/reader036/viewer/2022062516/56649d955503460f94a7d161/html5/thumbnails/12.jpg)
© 2012 Autodesk
ideateinc.com/educate1.800.550.1276 Passcode: 5936004#
Massing ToolsDraw profiles and paths to GENERATE FORMS:
![Page 13: © 2012 Autodesk Concrete Modeling Using Revit Structure Shruti Harve Senior Application Specialist, Ideate,Inc.](https://reader036.fdocuments.net/reader036/viewer/2022062516/56649d955503460f94a7d161/html5/thumbnails/13.jpg)
© 2012 Autodesk
Modeling a Precast Concrete Beam Slab/Void Slab Component
Learning Objectives:
1. Working in the Family Editor
2. ‘Structural Framing’ Template
3. Solid & Void Extrusion
![Page 14: © 2012 Autodesk Concrete Modeling Using Revit Structure Shruti Harve Senior Application Specialist, Ideate,Inc.](https://reader036.fdocuments.net/reader036/viewer/2022062516/56649d955503460f94a7d161/html5/thumbnails/14.jpg)
© 2012 Autodesk
Which Structural Framing Template?
1. Structural Framing Beams & Braces.rft
2. Structural Framing Complex & Trusses.rft
![Page 15: © 2012 Autodesk Concrete Modeling Using Revit Structure Shruti Harve Senior Application Specialist, Ideate,Inc.](https://reader036.fdocuments.net/reader036/viewer/2022062516/56649d955503460f94a7d161/html5/thumbnails/15.jpg)
© 2012 Autodesk
![Page 16: © 2012 Autodesk Concrete Modeling Using Revit Structure Shruti Harve Senior Application Specialist, Ideate,Inc.](https://reader036.fdocuments.net/reader036/viewer/2022062516/56649d955503460f94a7d161/html5/thumbnails/16.jpg)
© 2012 Autodesk
Structural Framing Template: Beams & Braces
1. Built-in-Reference Planes-What they mean? & What they do?
2. Material for Model Behavior
3. Symbolic Representation
![Page 17: © 2012 Autodesk Concrete Modeling Using Revit Structure Shruti Harve Senior Application Specialist, Ideate,Inc.](https://reader036.fdocuments.net/reader036/viewer/2022062516/56649d955503460f94a7d161/html5/thumbnails/17.jpg)
© 2012 Autodesk
Reference Planes:Left/Right: Full Extent of the geometry, Controls the length of Framing
Member Left/Member Right: Physical Geometry Edge/Cut back, Controls Cut Length
Stick Symbol Left/Right: Extents of stick representation when symbolic representation is set to "From Family"
Reference Planes in the Structural Framing: Beams & Braces
![Page 18: © 2012 Autodesk Concrete Modeling Using Revit Structure Shruti Harve Senior Application Specialist, Ideate,Inc.](https://reader036.fdocuments.net/reader036/viewer/2022062516/56649d955503460f94a7d161/html5/thumbnails/18.jpg)
© 2012 Autodesk
Symbolic Representation:
From Family: Stick Symbol is not auto created/auto generated
From Project Settings: Revit generates the stick symbol and follows the project ‘symbolic cut back’ settings under Manage>Structural Settings
‘Symbolic Representation’ in the Structural Framing Template
![Page 19: © 2012 Autodesk Concrete Modeling Using Revit Structure Shruti Harve Senior Application Specialist, Ideate,Inc.](https://reader036.fdocuments.net/reader036/viewer/2022062516/56649d955503460f94a7d161/html5/thumbnails/19.jpg)
© 2012 Autodesk
‘Material for Model Behavior’ in Structural Framing Template: Beams & Braces
Controls the Joining behavior of these members in a project, Example: Concrete beams auto join whereas Precast Concrete beams do not
![Page 20: © 2012 Autodesk Concrete Modeling Using Revit Structure Shruti Harve Senior Application Specialist, Ideate,Inc.](https://reader036.fdocuments.net/reader036/viewer/2022062516/56649d955503460f94a7d161/html5/thumbnails/20.jpg)
© 2012 Autodesk
Warped Double Tee
Learning Objectives:
1. Understanding and working with Family Profiles
2. Nesting Families
3. Using the ‘Swept Blend’ Geometry Creation tool
![Page 21: © 2012 Autodesk Concrete Modeling Using Revit Structure Shruti Harve Senior Application Specialist, Ideate,Inc.](https://reader036.fdocuments.net/reader036/viewer/2022062516/56649d955503460f94a7d161/html5/thumbnails/21.jpg)
© 2012 Autodesk
Thin Shell Concrete Roof (Hyperbolic Paraboloid)
Learning Objectives:
1. Working in the Massing Family Template
2. Using the Massing tools
3. Create ‘Roof’ by Face
![Page 22: © 2012 Autodesk Concrete Modeling Using Revit Structure Shruti Harve Senior Application Specialist, Ideate,Inc.](https://reader036.fdocuments.net/reader036/viewer/2022062516/56649d955503460f94a7d161/html5/thumbnails/22.jpg)
© 2012 Autodesk
Modeling Rebar
Two Primary Methods:
1. Place/Model Reinforcement using Reinforcement tools in Revit2. OR use Extensions (download from Subscription Center)
![Page 23: © 2012 Autodesk Concrete Modeling Using Revit Structure Shruti Harve Senior Application Specialist, Ideate,Inc.](https://reader036.fdocuments.net/reader036/viewer/2022062516/56649d955503460f94a7d161/html5/thumbnails/23.jpg)
© 2012 Autodesk
Custom Rebar Shape
Learning Objectives:
1. Working in the Reinforcement family Template
2. Create Custom Rebar Shape
3. Create parameter labels to control the rebar dimensions
![Page 24: © 2012 Autodesk Concrete Modeling Using Revit Structure Shruti Harve Senior Application Specialist, Ideate,Inc.](https://reader036.fdocuments.net/reader036/viewer/2022062516/56649d955503460f94a7d161/html5/thumbnails/24.jpg)
© 2012 Autodesk
Rebar Data: Concrete Beam Schedules
![Page 25: © 2012 Autodesk Concrete Modeling Using Revit Structure Shruti Harve Senior Application Specialist, Ideate,Inc.](https://reader036.fdocuments.net/reader036/viewer/2022062516/56649d955503460f94a7d161/html5/thumbnails/25.jpg)
© 2012 Autodesk
Ideate BIMlink 2013: Rebar Host Data in Rebar Schedules
![Page 26: © 2012 Autodesk Concrete Modeling Using Revit Structure Shruti Harve Senior Application Specialist, Ideate,Inc.](https://reader036.fdocuments.net/reader036/viewer/2022062516/56649d955503460f94a7d161/html5/thumbnails/26.jpg)
© 2012 Autodesk
Tips & Tricks
• Understanding Join Geometry in Revit Structure Joins & vs./ attachment Graphic appearance of joined vs. non joined concrete elements Joining Multiple items at once
• Pre cast Tilt up Panels (Using Parts)• Flat Slab with Sloped Soffit• Thickened Slab Edges
![Page 27: © 2012 Autodesk Concrete Modeling Using Revit Structure Shruti Harve Senior Application Specialist, Ideate,Inc.](https://reader036.fdocuments.net/reader036/viewer/2022062516/56649d955503460f94a7d161/html5/thumbnails/27.jpg)
© 2012 Autodesk
Graphic Appearance of Joined vs. Not Joined Concrete
![Page 28: © 2012 Autodesk Concrete Modeling Using Revit Structure Shruti Harve Senior Application Specialist, Ideate,Inc.](https://reader036.fdocuments.net/reader036/viewer/2022062516/56649d955503460f94a7d161/html5/thumbnails/28.jpg)
© 2012 Autodesk
Joining Multiple Components
![Page 29: © 2012 Autodesk Concrete Modeling Using Revit Structure Shruti Harve Senior Application Specialist, Ideate,Inc.](https://reader036.fdocuments.net/reader036/viewer/2022062516/56649d955503460f94a7d161/html5/thumbnails/29.jpg)
© 2012 Autodesk
Concrete Expansion Joints
•Use Opening by face (time consuming)
• Create a face based/line based void family
• Change the ‘Material for Model behavior in the family template to ‘Precast Concrete or Other’
![Page 30: © 2012 Autodesk Concrete Modeling Using Revit Structure Shruti Harve Senior Application Specialist, Ideate,Inc.](https://reader036.fdocuments.net/reader036/viewer/2022062516/56649d955503460f94a7d161/html5/thumbnails/30.jpg)
© 2012 Autodesk
Concrete Tilt up Panels
• Create Concrete wall and use ‘split with gap’ tool
• Use the PARTS tool
![Page 31: © 2012 Autodesk Concrete Modeling Using Revit Structure Shruti Harve Senior Application Specialist, Ideate,Inc.](https://reader036.fdocuments.net/reader036/viewer/2022062516/56649d955503460f94a7d161/html5/thumbnails/31.jpg)
© 2012 Autodesk
Flat Soffit: Top of Slab Sloped
![Page 32: © 2012 Autodesk Concrete Modeling Using Revit Structure Shruti Harve Senior Application Specialist, Ideate,Inc.](https://reader036.fdocuments.net/reader036/viewer/2022062516/56649d955503460f94a7d161/html5/thumbnails/32.jpg)
© 2012 Autodesk
Thickened Slab Edges
![Page 33: © 2012 Autodesk Concrete Modeling Using Revit Structure Shruti Harve Senior Application Specialist, Ideate,Inc.](https://reader036.fdocuments.net/reader036/viewer/2022062516/56649d955503460f94a7d161/html5/thumbnails/33.jpg)
© 2012 Autodesk
What we covered today……. Overview of the Solid & Surface modeling tools in Revit Structure Learning how these apply to modeling Concrete Components &
Structures Modeling a Precast Concrete Void Slab Modeling a Precast Warped Double Tee Modeling Thin Shell Concrete Roof (Hyperbolic Paraboloid) Creating Custom Rebar Shape; Rebar schedules
Tips & Tricks Questions
![Page 34: © 2012 Autodesk Concrete Modeling Using Revit Structure Shruti Harve Senior Application Specialist, Ideate,Inc.](https://reader036.fdocuments.net/reader036/viewer/2022062516/56649d955503460f94a7d161/html5/thumbnails/34.jpg)
© 2012 Autodesk
Autodesk, AutoCAD* [*if/when mentioned in the pertinent material, followed by an alphabetical list of all other trademarks mentioned in the material] are registered trademarks or trademarks of Autodesk, Inc., and/or its subsidiaries and/or affiliates in the USA and/or other countries. All other brand names, product names, or trademarks belong to their respective holders. Autodesk reserves the right to alter product and services offerings, and specifications and pricing at any time without notice, and is not responsible for typographical or graphical errors that may appear in this document. © 2012 Autodesk, Inc. All rights reserved.