Weaving Presentation By Sukhvir Sabharwal

Post on 21-Jan-2015

3.062 views 14 download

Tags:

description

Hi All, pls find Weaving presentation, Hope this would help you. Best, Sukhvir

Transcript of Weaving Presentation By Sukhvir Sabharwal

Weaving Presentation

By:-Sukhvir Sabharwal

Triburg ///

1sukhvir.sabharwal.tit07@gmail.com

Weaving• Interlace between two sets of yarn

• Weaving is the crossing of yarns at right angles or strips of other materials to produce a flat, more or less compact surface.

2sukhvir.sabharwal.tit07@gmail.com

Weaving Preparatory Process

• Before weaving, the weaver beam needs some few operations before placing the beam on loom

• Warping

• Sizing

• Drawing

3sukhvir.sabharwal.tit07@gmail.com

Warping

• To make bigger package to supply warp yarn

• Yarn with uniform tension

4sukhvir.sabharwal.tit07@gmail.com

Sizing

• The purpose of sizing to increase weaving resistance

• Resistance against abrasion

5sukhvir.sabharwal.tit07@gmail.com

Drawing in

• The drawing-in of the sized warp threads through the heald eyes, reeds and drop-wires of the loom

• May be done either manually by a pair of workers

6sukhvir.sabharwal.tit07@gmail.com

Types of Looms

• Hand loom

• Power Loom

• Jacquard Looom

• Air Jet Loom

• Water Jet Loom

• Rapier Loom

• Sulzer Loom

• Projectile

7sukhvir.sabharwal.tit07@gmail.com

Loom Chart

8sukhvir.sabharwal.tit07@gmail.com

• Handloom : 

weaver could sit at the centre of the loom and merely pull the handle to make the shuttle move from one end of the fabric to insert a weft thread. 

9sukhvir.sabharwal.tit07@gmail.com

• Power loom : 

Earlier version of power loom were run by two man. Soon power looms were driven by steam and most of the wooden parts were replaced with iron. The average speed of the power loom had increased from 60 to 140 picks per minute with the rise on productivity.

• Productivity of this m/c is very low upto 20 to 24 meter per day

• The weft insertion is done thru shuttle which has a capecity of 10 meter, iot means after every 10 meter there will be a knot  

10sukhvir.sabharwal.tit07@gmail.com

• Automatic Loom/Shuttleless loom : 

Traditional Power looms were stopped every few minutes in order to replace the empty weft pirns in the shuttle and this limited the number of looms, a weaver could operate to about four. Later an automatic weft transfer system which replaced the weft pirn in the shuttle without slowing or stopping the loom. The average speed of the Automatic loom is 100 to 200 meter per day. 

11sukhvir.sabharwal.tit07@gmail.com

• Shuttleless Loom :The dynamic problems created by the picking and checking mechanism and the inherent process of pirn winding for shuttle looms had encouraged the loom makers to develop alternative means of weft insertion in which heavy shuttle is not projected forwards and backwards across the width of the loom. It is customary to refer these looms as shuttleless looms.

12sukhvir.sabharwal.tit07@gmail.com

• MAJOR FAULTS• Starting Mark

• Double Pick

• Brocken Pick

• Thick Place

• Miss Pick

• CUTTABLE FAULTS• Crack

• Tear

• Fabric Cut

• Multiple Breakage

• Float

• CONTINUOUS FAULTS• Wrong Pattern

• Missing End

• Stitches

• Reed Cut

• Temple Cut

• MENDABLES• Loom Fly

• Bent Pick

• Hanging Thread

• Snarling

• Loops

13sukhvir.sabharwal.tit07@gmail.com

Woven fabrics

14sukhvir.sabharwal.tit07@gmail.com

The production technology has not changed much over time

Warp beam

Krill

The warping looms at Lowell Mills in 1854, Massachusetts15sukhvir.sabharwal.tit07@gmail.com

WEAVING EQUIPMENT

16sukhvir.sabharwal.tit07@gmail.com

Woven structures Plain weave

17sukhvir.sabharwal.tit07@gmail.com

Woven structuresTwill weave

Twill weave, the secondbasicweave, is characterized bydiagonal lines running at anglesvarying between 15° and 75°. Atwill weave is denoted by usingnumbers above and bellow a line(such as 2/1 twill which may beinterpreted as two up and onedown in the shedding sequence).

18sukhvir.sabharwal.tit07@gmail.com

Woven structureSatin and Sateen weave

Sateen weave is the third basicweave, in which the interlacingpoints are arranged in a similarway to twill weaves but withoutshowing the twill line. The satinweave is warp face weave andthe sateen is a filling face weave.Fig. Shows 5 ends (Harness)satin. In this case, the repeat is on5 ends x 5 picks.

19sukhvir.sabharwal.tit07@gmail.com

Selvages

20sukhvir.sabharwal.tit07@gmail.com

• Thank You

21sukhvir.sabharwal.tit07@gmail.com