Post on 07-Apr-2018
8/6/2019 Triple Handle
http://slidepdf.com/reader/full/triple-handle 1/2
TRIPLE-ACTION HANDLE ASSEMBLY INSTRUCTIONS
Needle Knob
Needle Knob
Set ScrewAllen Wrench
Needle Knob Spring
AIRBRUSH NOT INCLUDED
Needle Chucking
Knob
Triple Action
Barrel
1.Removehandle.(image1) 5. Theneedleshouldextend
justpasttheendothe
handle.(image5)
2.Removeneedlechuckingnut.
( image2)
3.GENTLYpushonthebackothe
needletomakesureitisseated
intothenozzle.(image3)
4.ScrewtheTripleActionBarrel
ontotheairbrushbody.Tighten lightly.(image4)
6. PlacetheAllenwrenchinto
thesetscrewinthesideothe
NeedleKnob.(image6)
7. SlidetheNeedleKnobover
theneedleintheairbrush.
(image7)
8. SlidetheNeedleKnoboverthe
needleuntilthesideotheAllen wrenchcomesintocontactwith
theendotheTriple-ActionBarre
(ima ge8)Note: If the Allen wrenc
cannot touch the end of the
Triple-Action Barrel, unscrew
the set screw one turn to allow
the Needle Knob to move forward
and seat properly.
1.
2.
3.
4.
5.
6.
7.
8.
8/6/2019 Triple Handle
http://slidepdf.com/reader/full/triple-handle 2/2
Trouble Shooting
1. Continuous spray when the main lever (trigger ) is not pulled back:
a.Theneedleisnotseatedproperlyinthenozzle.Reseattheneedleby
unscrewingtheNeedleChuckingKnobtoreleasetheneedleandgently
pushingonthebackotheNeedleKnobwhileretighteningtheNeedle
ChuckingKnob.
b.TheTriple-ActionBarrelisbeingusedasaPre-Sethandleandnot
allowingthenozzletoullyclose.TurntheTriple-ActionBarreluntil
itistightontheairbrushbody.
c.TheNeedleKnobisnotpositionedcorrectlyontheneedle.
Repeatsteps3-8.
2. The Needle Knob does not spring back when loosing the Needle
Chucking Knob:
a.TheneedlespringisnotontheNeedleKnobAssembly.
b.Driedpaintiscausingtoomuchrictioninsidetheairbrush.
UseIwata-MedeaSUPERLUBEtolubricatethemainlever(trigger)area.
3. The Needle Knob does not attach to the needle when tightening
the set screw:
a.TheTriple-ActionBarrelisnotscrewedallthewayontotheairbrush
bodybeoreattachingtheNeedleKnob.RepeatSteps3-8.
b.TheNeedleKnob’ssetscrewistootightbeorepositioningitontothe needle.Loosenthesetscrewandrepeatstep3–8.
c.Thenozzleisdamagedallowingtheneedletomovetooarorwardin
theairbrush.Inspectnozzleandreplaceinecessary.
9. Firmlytightenthesetscrewby
turningtheAllenwrench.Take
carenottobendtheneedle
inside.TheNeedleKnobisnow
attachedtotheneedleinthe
correctposition.
10.PulltheNeedleKnobwiththe
attachedneedleouttheback
otheairbrush.(image9)
11.WiththeNeedleKnob assemblyremovedromthe
airbrush,slidetheNeedle
ChuckingKnobintotheback
othehandleandscrewitonto
theneedlechuckingguide
insidethehandle.Screwiton
untilthereisasmallamounto
resistance,butnotalltheway
downtothehandle.Then
unscrewoneullturntounlock.
(image10)
12.PlacetheNeedleKnobSpring
overtherontotheneedle andslideitdowntheneedle
untilitseatsontotheronto
theNeedleKnob.(image11)
9.
10.
13.SlidetheNeedleKnobassembly
intothebackotheairbrush
andgentlypushitorward
untiltheneedleisseatedinto
theairbrush.(image12)Iyou
meetresistance,thenunscrew
NeedleChuckingKnoba1/2turn
urther.Becareulwhenthe
tipotheneedlepassesthrough
themainlever(trigger)area.Ithe
needlestopsabruptly,re-examine
themainleverareatomakesure itisassembledcorrectly.
14.Gentlypushthebackothe
NeedleKnobtoseatitintothe
nozzle.(image13)Whilegently
pushingontheNeedleKnob,
useyourthumbandmiddle
ngertotightentheNeedle
ChuckingKnob.(image14)
The Triple-Action Handle
is now fully assembled!!!
11.
13.
14.
TRIPLE-ACTION HANDLEHOW TO USE
Quick Needle Release
UnscrewtheNeedleChuckingKnob1/4turn.Pull
theNeedleKnobAssemblyoutthebackothe
handle.(imageA)
Quick Needle AssemblySeesteps13and14.
Quick Flush
FullyopenthenozzlebypullingbackontheNeedle
ChuckingKnobwhilespraying.Thisfushesout
mostclogseasily.Italsoallowstheusertospray
quickbackgroundareas.(imageB)
Pre-Set Handle
TurntheTriple-ActionBarreltopushbackthe
NeedleKnobwhilespraying.Thispre-setsthespray
pattern,operationbecomessimilartoasingle
actionairbrush,orrepeatedsprayuse.(imageC)
BONUS – Needle Cap Holder
UnscrewtheneedlecapandscrewitontothebackotheNeedleKnob.Thisprovidesaconvenient
placetostoretheneedlecapwhennotinuse.
(imageDandE)
P.O.Box14397,Portland,OR97293
tel:503-253-7308ax:503-253-0721
www.iwata-medea.comino@medea-artool.com
12.
A.
B.
C.
D.
E.