Post on 18-May-2018
Tool Holders Collection
3Tool Holders Collection
Open mind, creativity and flexibility are the main values that we believe in and that help us to design better and better collections for our diverse customers. We combine experience with research and new technolo-gies and dedicate our attention to every step of product creation.
Our main intention is to support the marketing activities of our customers through our complete products, designed in line with their corporate identity and area of business.
As a consequence, we are presenting the brand new collection of products created specifically for the BAHCO.
We sincerely hope that our offer will serve yourselves as a strong marketing support and help to build up the recognition of the BAHCO brand. The Catalogue is dedicated exclusively for the BAHCO internal use and replaces all our prior offers.
Yours sincerely,
GTC Team.
54 Tool Holders CollectionTool Holders Collection
TABLE OF CONTENT
Electrician`s Pouch 4750-EP-1 p. 9
Drill Holster Right & Left Hand 4750-DHO-3 p. 10
Knife Holder4750-KNHO-1 p. 16
Knife Holder For ERGO™ Series
4750-KNHO-0 p. 17
Multi Purpose Holder4750-MPH-1 p. 12
Hammer Holder 4750-HHO-2 p. 11
Vertical Smartphone Holder4750-VMPH-1 p. 15
Quick Release Fabric Adjustable Belt
4750-QRFB-1 p. 19
Universal Pouch 4750-UP-1 p. 13
Two Pocket Fixings Pouch4750-2PP-1 p. 14
Heavy Duty Leather Belt4750-HDLB-1 p. 19
3 Pouch Belt Set4750-3PB-1 p. 23
Heavy Duty Belt With Cushion 4750-HDB-2 p. 18
Heavy Duty Belt Set4750-HDBS-2 p. 22
Roll Cover For Tools4750-ROCO-1 p. 27
Folding Front Leather Tool Case4750-FOLTC-1 p. 26
Secateur HolsterPROF-SEC p. 29
Lopper HolsterPROF-LOPP p. 28
Anti Slip Knee Pads4750-KP-1 p. 30
Braces With Clips 4750-BWC-1 p. 31
Tool Case Tube4750-TOCST-1 p. 25
76 Tool Holders CollectionTool Holders Collection
The best materials and technologies to suit the needs of our customer.
MATERIAL & TECHNICAL SOLUTIONS
Black 3D Air Mesh
Polypropylene Tape
Measuring Tape Clip
High Quality Zipper
Polyester 600D
Polypropylene Sheet
Plastic Handle
Lock with Key
Polyester 1680D
High Grade Leather
Steel Buckle
Metal Buttons
Suede Leather
Black Rivets with Washers
Dual Layer of Waterproof Metrial
Net Pocket
Side Gate Hammer Holder
Thick Foam
Cushioned Shoulder Pad
Synthetic Leather
Polypropylene Sheet
Technical Information:
heig
ht
length width
height:length:width:weight:volume:
metric imperial300
270
150
0,520
2,500
11.70
10.53
5.85
1.14
0.55
mm
mm
mm
kg
l
in
in
in
lb
gal
98 Tool Holders CollectionTool Holders Collection
Outside features:Specifically researched design to carry a full range of
specialized electrical tools.
4750-EP-1ELECTRICIAN’S POUCH
General featuresFits any BAHCO tool belt or normal clothing belt. Universal tool loop for your bigger tools to keep them organized. Chain hook for an easy access to insulation tapes or flex. Main deep pocket for safe storage of long tools and fixings, etc. Additional pocket for smaller tools gives easy tool access.Real leather slots on the sides ideal for holding longer tools i.e. screwdrivers, knives. Necessary equipment is at hand when needed. Made of strong 1680 denier polyester.
Technical Information: Technical Information:
heig
ht
length width
height:length:width:weight:volume:
metric imperial290
170
90
0,260
0
11.31
6.63
3.51
0.57
0.00
mm
mm
mm
kg
l
in
in
in
lb
gal
heig
ht
length width
height:length:width:weight:volume:
metric imperial180
120
70
0,170
0
7.02
4.68
2.73
0.37
0.00
mm
mm
mm
kg
l
in
in
in
lb
gal
1110 Tool Holders CollectionTool Holders Collection
4750-DHO-3DRILL HOLSTER RIGHT & LEFT HAND
General featuresHolds any standard sized cordless or mains powered drill. Suits left and right handed users as well as forward and backward facing machines. Rubber slots on the top ideal for storing drill bits.
Outside features:Genuine leather strap with a metal button holds the drill safely when climbing on or off a scaffolding.
4750-HHO-2HAMMER HOLDER
Outside features:Solution with side gate lets you
easily put the tool in without looking at the holder.
Keeps all kinds of common hammers used on building site.
General featuresFits any BAHCO tool belt or normal clothing belt.Useful while working with the hands up, when the quick access to tools is needed. Made of strong 1680 denier polyester. Visible badge with BAHCO logo on the front of the holder. Swings to keep your hammer at a comfortable angle.
Technical Information:Technical Information:
heig
ht
length width
height:length:width:weight:volume:
metric imperial240
170
60
0,220
0
9.36
6.63
2.34
0.48
0.00
mm
mm
mm
kg
l
in
in
in
lb
gal
heig
htlength width
height:length:width:weight:volume:
metric imperial260
290
180
0,550
2,000
10.14
11.31
7.02
1.21
0.44
mm
mm
mm
kg
l
in
in
in
lb
gal
Technical Information:
4750-UP-1UNIVERSAL POUCH
General featuresFits any BAHCO tool belt or normal clothing belt. Riveted for truly unbreakable strength. Real leather slots ideal for holding longer tools. Necessary equipment is at hand when needed. Measuring tape clip for any common builder’s tape measure from 3 to 10 meters long with engraved BAHCO logo. Made of strong 1680 denier polyester.
Outside features:Two deep multi-purpose open
pockets provide for quick tool recognition.
4750-MPH-1
1312 Tool Holders CollectionTool Holders Collection
Outside features:Leather slots ideal for holding different types of tools i.e. knives, screwdrivers.
MULTI PURPOSE HOLDER
General featuresRiveted for truly unbreakable strength. Measuring tape clip for any common builder’s tape measure from 3 to 10 meters long. Made of strong 1680 denier polyester. Extra leather slot in the middle for a pen or a small screwdriver. Ideal item to be added to your own creation of Tool Belt Set together with other products.
Technical Information:
1514 Tool Holders CollectionTool Holders Collection
Outside features:Universal mobile phone holder with a flap for extra protection on a building site.
VERTICAL SMARTPHONE HOLDERGeneral featuresClosed by VELCRO for greater security. Made of strong 1680 denier polyester. Visible badge with BAHCO logo on the front of the holder. Fits any belt from the Collection. Works also without the belt.
4750-VMPH-1
Technical Information:
heig
ht
length width
height:length:width:weight:volume:
metric imperial160
100
35
0,080
0,120
6.29
3.93
1.37
0.17
0.03
mm
mm
mm
kg
l
heig
ht
length width
height:length:width:weight:volume:
metric imperial260
260
180
0,370
2,000
10.14
10.14
7.02
0.81
0.44
mm
mm
mm
kg
l
in
in
in
lb
gal
4750-2PP-1
Outside features:General shape with rigid pocket sides designed to keep the pouch stable and vertical, preventing tools and fixings from falling out.
TWO POCKET FIXINGS POUCHGeneral featuresPerfectly positioned wide pockets hold plenty of fixings and provide quick tool recognition.Fits any BAHCO tool belt or normal clothing belt.Necessary equipment is at hand when needed. Made of strong 1680 denier polyester.
Technical Information:
height:length:width:weight:volume:
metric imperial
210
85
20
0,080
0,080
8,27
3,35
0,79
1,76
0,02
mm
mm
mm
kg
l
in
in
in
lb
gal
heig
ht
length width
height:length:width:weight:volume:
metric imperial200
100
50
0,090
0,100
7.87
3.93
1.96
0.19
0.02
mm
mm
mm
kg
l
in
in
in
lb
gal
heig
ht
length width
1716 Tool Holders CollectionTool Holders Collection
4750-KNHO-0
4750-KNHO-1 KNIFE HOLDER FOR ERGO™ SERIES
KNIFE HOLDER
Outside features:Unique shape of this holder specifically designedto suit the utility knives
General featuresFinished with an extra layer of suede leather to ensure resistance to years of wear and tear. Necessary equip-ment is at hand when needed. Riveted for truly unbreakable strength. Made of strong 1680 denier polyester. Fits any belt from the Collection. Visible badge with BAHCO logo on the front of the holder.
General featuresFits perfectly into small knives. Necessary equipment is at hand when needed. Made of strong 600 denier polyester. Fits any belt from the Collec-tion. Visible badge with BAHCO logo on the front of the holder.
Technical Information:
heig
ht
length
height:length:width:weight:volume:
metric imperial50
1200
0
0,310
0
1.95
46.80
0.00
0.68
0.00
mm
mm
mm
kg
l
in
in
in
lb
galheig
ht
length
Technical Information:
height:length:width:weight:volume:
metric imperial190
900
50
0,650
0,250
7.41
35.10
1.95
1.43
0.06
mm
mm
mm
kg
l
in
in
in
lb
gal
HEAVY DUTY BELT WITH CUSHION
heig
ht
length
Technical Information:
height:length:width:weight:volume:
metric imperial50
1290
0
0,300
0
1.95
50.31
0.00
0.66
0.00
mm
mm
mm
kg
l
in
in
in
lb
gal
1918 Tool Holders CollectionTool Holders Collection
QUICK RELEASE FABRIC ADJUSTABLE BELT
HEAVY DUTY LEATHER BELT
General featuresSimple design and fl exibility of the belts helps in easy using. Our belts are made of the high quality materials such as high grade leather or 1680 denier polyester. Our belts are design in the universal sizes so they fit any weight. Company logo is visible and placed on each belt.
4750-QRFB-14750-HDB-2
4750-HDLB-1
Sample 9
Sample 10
General featuresFeatures a Heavy Duty Leather Belt with stainless steel twin-pin buckle.Made of strong 1680 danier polyester with polyethylene backing.Riveted for truly unbreakable strength.
Choose PouchesEach Pouch is designed for different tools. Find out whichtools you are using mostly and choose the best pouches.
Add BeltYou have three different belts to choose from.The belt will be a base of your belt set.
Contact with UsIf you need any advice, we offer our wide experience in combining belts and pouches together. Just contact us and we will advise you how to create the most practical and useful tool belt set to suit your needs. Different kinds of jobs require different tools and consequently different carrying systems.
Get your own belt setNow you are ready to use your own tool belt setaccording to your needs.
2120 Tool Holders CollectionTool Holders Collection
Follow four easy steps to have your personalised tool belt set.
CREATE YOUR OWN TOOL BELT SET
2322 Tool Holders CollectionTool Holders Collection Tool Holders Collection 22
4750-HDBS-2
height:length:width:weight:volume:
metric imperial360
900
160
1,550
2,250
14.04
35.10
6.24
3.41
0.50
mm
mm
mm
kg
l
in
in
in
lb
gal
Technical Information:
heig
ht
length
General featuresA professional solution for a hard working carpenters and builders features 5 handy pockets to cover most trade applications. Strong construction with riveted reinforcement – for truly industrial strength with galvanized washers top and bottom. Easy to adjust comfortable nylon belt with 50 mm polypropylene quick release buckle.
heig
ht
length
height:length:width:weight:volume:
metric imperial260
650
180
1,230
4,500
10.14
25.35
7.02
2.71
0.99
mm
mm
mm
kg
l
in
in
in
lb
gal
Technical Information:
Outside features:Fits waist sizes from 80 cm to 120 cm (32’’ to 48’’).
HEAVY DUTY BELT SET
General featuresThe ultimate tool belt system is made from a combination of tough nylon and high grade plus synthetic stitching and riveted reinforce-ment. Moveable components, you can easily take out the pockets from the belt. Fully padded belt by 3D mesh breathable material for extra comfort when carrying heavy tools.
3 POUCH BELT SET4750-3PB-1
Outside features:Strong construction with riveted reinforcement.
Technical Information:
height:length:width:weight:volume:
metric imperial260
500
270
2,980
24,000
10.14
19.50
10.53
6.56
5.28
mm
mm
mm
kg
l
in
in
in
lb
gal
2524 Tool Holders CollectionTool Holders Collection
Outside features:Perfect for storing long tools.
4750-TOCST-1TOOL CASE TUBE
General featuresMade of synthetic leather. Long internal pocket in the main compartment. Rubber carry handle, simple alternative solution to carrying bag on your shoulder. Leather closing straps instead of metal locks let us adjust the bag for tools that might be even longer then a case and would stick out.
General featuresMade of soft 1680D polyester. Designed to store all of the small tools and pieces of gear that seem to get lost in the bottom of bags. Elasticated tool securing band prevent tools from falling out giving you safety storage.
4750-ROCO-1ROLL COVER FOR TOOLS
heig
ht
length width
height:length:width:weight:volume:
metric imperial380
320
50
0,300
0
14,96
12.48
1.95
0.66
0.00
mm
mm
mm
kg
l
in
in
in
lb
gal
Outside features:Cover for 18 items. Closed by quick release buckles
fastened on two straps
2726 Tool Holders CollectionTool Holders Collection
heig
ht
length width
height:length:width:weight:volume:
metric imperial260
440
210
2,900
22,000
10.23
17.32
8.26
6.39
4.83
mm
mm
mm
kg
l
in
in
in
lb
gal
FOLDING FRONT LEATHER TOOL 4750-FOLTC-1
Outside features:Internal pockets provide for quick tool recognition. No more mess in your bag.
General featuresOpen design for quick and easy access. External pocket for documents. Adjustable heavy-duty shoulder belt, easy to unfasten when it is not needed. Shoulder pad makes carrying the bag nicer when it is full. Made of strong synthetic leather. Plastic handle enables carrying the bag when is full. Visible badge with Company logo on the front of the bag.
Technical Information:Technical Information:
height:length:width:weight:volume:
metric imperial230
160
50
0,130
0
9,05
6,30
1,97
0,28
0,00
mm
mm
mm
kg
l
in
in
in
lb
gal
height:length:width:weight:volume:
metric imperial370
160
50
0,370
0
14,57
6,30
1,97
0,82
0,00
mm
mm
mm
kg
l
in
in
in
lb
gal
2928 Tool Holders CollectionTool Holders Collection
General featuresMultipurpose – two pockets in two sizes. Most of basic tools used in Orchard or Garden can be put inside. Made of strong polyester 1680D. The pouch sits comfortably on any belt from the collection. Perfectly positioned two open pockets provide quick tool location and easy use.
General featuresPVC coated polyester fabrics lining to give extra strength and protect the holster before damage in hard orchard conditions. Additionally this fabric doesn’t tear when it is cut. Made of strong and durable 35mm width ealstic rubber straps are easy to put on. Universal size tahnks adjustable strong VELCRO tape stitched to each strap. Pocket on the front side for easy access to smaller tools or things. Perfect for sharpening stone. Also PVC coated polyester fabrics for longer life.
PROF-SECSECATEUR HOLSTER
PROF-LOPPLOPPER HOLSTER
Technical Information:Technical Information:
height:length:width:weight:volume:
metric imperial0
50
0
0,200
0
0.00
1.95
0.00
0.44
0.00
mm
mm
mm
kg
l
in
in
in
lb
gal
heig
ht
length width
height:length:width:weight:volume:
metric imperial160
220
70
0,300
0
6.24
8.58
2.73
0.66
0.00
mm
mm
mm
kg
l
in
in
in
lb
gal
General featuresUniversal lightweight knee pads for different kinds of surfaces. Heavy Duty rubber cups ensure comfort and safety when used in difficult conditions. Elastic straps with hook-and-loop fasteners for easy adjustment to leg sizes. Breathable 3D Air Mesh material lining provides maximum cushioning for all day of wearing. Visible badge with BAHCO logo on the front of the pads.
ANTI SLIP KNEE PADS4750-KP-1
Outside features:Flexible knee pads, made from rubber and polyester 1680 denier ideal for most applications including general construction, use on uneven surfaces and for laying carpets, floor tiles and flooring etc.
3130 Tool Holders CollectionTool Holders Collection
4750-BWC-1BRACES WITH CLIPS
General featuresDesigned to transfer weight from waist to shoulders. Universal size. Fully cushioned pad provides for comfortable wearing. Heavy-duty steel fastening clips with engraved BAHCO logo. Made of strong and durable elastic rubber. Visible badge with BAHCO logo.
Outside features:Straps equipped with two metal buckles for perfect
adaptation to the body shape.
34 Tool Holders Collection
NOTES