Post on 03-Jun-2020
TIPL CALIBRATION LABORATORY
AJMER
Toshniwal Industries Pvt. Ltd.Industrial Estate, Makhupura,Ajmer - 305 002 (India)Tel: 0145-2695171Fax: 0145-2695174
Contact
Ajmer | Ahmedabad I Bangalore I Bhillai I Bhubaneshwar I Chandigarh I Chennai I Delhi I Hyderabad I Jamshedpur I Kolkata I Lucknow I Mumbai | Nagpur I Pune | Raipur I Vadodara
Calibration Facility
Local Contact
Electro-Technical DC Voltage BMC 0.004% typical DC Current BMC 0.011% typical DC Resistance BMC 0.012% typicalThermal-Contact Temperature Measurement RTD/ Thermocouple BMC 0.16°C typical Non-Contact Temperature Measurement Infrared Radiation Sensing BMC 0.6°C Optical Pyrometer BMC 9°C typical
Major Test Equipment/ Facility
KEITHLEY 6½ Digit MultimeterVICTOR V/mA CalibratorCambridge Precision BridgeVICTOR Temperature CalibratorISOTEC PRT, T/C Probe & Dry Block FurnaceCHINO Black Body FurnaceLAND Tungsten Strip Lamp calibration Bench
TIPL CALIBRATION LABORATORY, situated in Ajmer is a unit of Toshniwal Industries Pvt. Ltd., a leading company manufacturing Test Measurement and Process Control instruments since more than 50 years. TIPL CALIBRATION LABORATORY is inherited by expertise in Thermal & Electro-Technical calibration derived through rich experience of 50 years.TIPL CALIBRATION LABORATORY follows requirements of International standard ISO/IEC 17025:2005. Our mission statement is “Leadership through Customer Satisfaction & Technology”.TIPL CALIBRATION LABORATORY received NABL accreditation on 05/08/2011 vide NABL certificate No. C-0759 for Electro-Technical and C-0750 for Thermal calibration facility.
TIPL CALIBRATION Laboratory's Electro-technical facility has capability to calibrate DC Voltage, Current & Resistance, with precision of as low as 0.004%, and is equipped with high precision Multimeter, Calibrators,Precision Bridges and Standard Resistances. Thermal facility has capability to calibrate contact sensors RTD/ thermocouple with precision of as low as 0.16°C & calibrate Non-contact temperature measurement systems Infrared/ Optical pyrometers with precision of as low as 0.6°C, and is equipped with Black Body furnaces, Dry Block furnaces, precision Multimeter, and reference junction.TIPL CALIBRATION LABORATORY has adequate strength of calibration Engineers who are well versed with calibration procedures, and are suitably trained to calculate Measurement Uncertainty as per ISO/IEC 17025:2005.
SR.PARAMETER/
MODE/ METHOD RANGEACCURACY
QUANTITY(Equipment Wise)
(±)
DC VoltageSource/ Direct
Measure/ Direct100nV - 10V100nV - 10V
0.2% to 0.04%0.41% to 0.004%
DC CurrentSource/ Direct
Measure/ Direct5mA - 20mA1mA - 20mA
0.12% to 0.05%0.075% to 0.011%
DC Resistance Source/ DirectMeasure/ Direct
0.001Ω - 100kΩ0MΩ - 1MΩ
1MΩ - 10MΩ
0.05% to 0.057%0.46% to 0.015%0.015% to 0.199%
TemperatureSimulation
SourceRTD - Pt100
T/C - T, J typeT/C - K, N, E typeT/C - R, S, B type
MeasureRTD - Pt100
T/C - T, J typeT/C - K, N, E typeT/C - R, S, B type
No.
-200 - 800ºC 1ºC-100 - 800ºC 1.2ºC-200 - 1300ºC 1.8ºC
0 - 1800ºC 2.7ºC
-200 - 800ºC 1ºC-100 - 800ºC 1.2ºC
1.8ºC0 - 1800ºC 2.7ºC
-200 - 1300ºC
SR.PARAMETER/
MODE/ METHOD RANGEACCURACY
QUANTITY(Equipment Wise) (±)
Temp. Contact
Measure/Comparison 50 - 1400ºC 0.16ºC to 2.2ºC
No.
TypeThermocouple &RTD (Any Type)with and withoutindicator
Temp. Non-Contact TypePortable/ OnlineRadiationThermometer
Measure/Comparison 50 - 1400ºC 0.6ºC to 2.1ºC
Temp. Non-Contact TypeOptical Pyrometer
Measure/Comparison
(Disappearingof Filament)
1000 - 2000ºC 9ºC to 15ºC
1
2
3
1
2
3
3