Post on 09-Aug-2019
THE HOD’S DESK
My greetings to all our beloved students of Mechanical Engineering. Like every year, we are bringing out
our house magazine “YANTHROHUM”. We are very happy that our Global Academy of Technology has
been accredited “A” grade by NAAC. I am also happy to place on records that our M.Tech students have
secured VTU 1st and 2nd Ranks and our B.E student has secured VTU 5th Rank during 2016-17.
Our student teams Green Granades and GoKart have participated in racing competitions, won prizes
and have brought laurels to our department and also to GAT.GAT is signing MOU with M/S Toyota
Kirloskar Motors Pvt Ltd to set up Center of Excellence in Automotive Engineering in our department.
I wish all the outgoing students all the very best in their future endeavours li ke their Job, higher
education or entrepreneurship.
I thank our Honourable Management and Principal for their continuous support and encouragement for
the departmental activities. I also thank all the staff members for their cooperation and support.
Outgoing batch of the year(Under graduate)
2K14 BATCH-SECTION -A
2K14 BATCH-SECTION -B
Students/Faculty Achievements Sumukha Koundinya ( 1GA16ME101) & Vineeth Vishnu prasad ( 1GA16ME114) of 3rd semester
won the INTER-COLLEGIATE CLIMATE CHANGE QUIZ- 2017 organized by Divecha centre for
climate change on Thursday 14th September 2017 at IISc Bangalore.
S Rajat(1GA16ME080), Rahul A( 1GA16ME073), Vignesh L H ( 1GA16ME110) of 4th semester won
first prize in English quiz on know your India LITFEST 2017 conducted by III cell on GAT campus.
V. Bharat, Associate Professor, won Best paper for poster presentation in International
conference at NIT Tiruchirapalli.
Sri vishnu Bharadwaj,Vaishali Gowda ,Supritha, Shreyas S of 6th Semester won the
poster presentation contest conducted at GAT campus during November 2017.
KSCST under “Student Project Programme” funded the project titled “ Design and
Fabrication of Low cost Four Rows Paddy(Bhatta) Transplanter used for Agriculture
Purpose” .This project is successfully carried out by Chirag K ,Akash, Bharat R & Gagan
Gowda of 8th Semester under the guidance of Mr. Ghaleppa, Assistant Professor.
Mr. Nikhil M.K., Mr. Prashanth R, Mr. Praveen Bhat P and Mr. Vishwas M, students of 8th
semester secured second prize at the project exhibition- YANTRIX 2018 held at City Engineering
College, Bengaluru. The were awarded with certificates, medals and cash prize of Rs. 5000 (Five
thousand only) for their project titled "Design of Cylindrical Pressure Vessels with Hemispherical
End Closures".
Students during poster presentation
Innovative Student Projects
Solar Powered Refrigeration System Solar and wind powered hybrid pump
Pneumatic Shearing Machine Low cost Rice Planter
Books authoured by our faculty
National level competitions
IK 9 Karting (2017 – 18)
Runners up for SIEGER Pro-Karting Championship organized by SIEGER Innovations
Venue RKDF University, Bhopal
Month / Year September 2017
Team name Green Granades
Awards 2nd Place in Innovation , 1st Place in B-Plan,Best Manufacturing Award
BUDDH INTERNATIONAL CIRCUIT (2017 – 18)
Venue Buddh International Circuit, Noida
Month / Year January 2018
Team name Green Granades
Award Best Design Award
Industrial visits Visit to IMTEX
Students being educated about Casting at Galvano Castings
Visit to HAL,Bengaluru
Mechanical students of 8th semester visited Central Manufacturing Technology Institute
for the awareness of students in industry needs & impart knowledge in the field of
manufacturing 0n 27th February, 2018.
Department of Mechanical Engineering organized Industrial visits to IMTEX, Metal Forming
2018 at BIEC for the 4th & 6th Semester Mechanical engineering Students on 3oth day of
January 2018.
Department also arranged visit to Hindustan Aeronautics Limited, Helicopter division,
Bengaluru to the Students of VIII Semester Mechanical Engineering .
Students of 3rd semester visited Galvano Casting Pvt Ltd, Bengaluru on 12.10. 2017 to
understand the real time process of casting and shop floor control.
WORKSHOPS TRAINING IN HYDRAULICS AND PNEUMATICS
Students at Global Academy Of Technology were given a hands on training experience on
Hydraulics and Pneumatics at Bosch Rexroth, Mysore conducted on 17th & 18th November 2017.
Resource Person was Dr. N. Nagaraja, Professor, GAT.
REFRIGERATION & AIR CONDITIONING
Two day Workshop on Refrigeration and Air-Conditioning was organized on April 3rd and 4th
2018 at Global Academy of Technology by Department of Mechanical Engineering Departme nt
in association with ISHRAE. The objective of the workshop was to make students aware of
industry needs, impart knowledge in the field of Refrigeration and Air-Conditioning which can
be a promising field to work with.
Industrial Visit to VSM Solar Pvt. Ltd., and Central Air Conditioning Plant – SS Hospitals as a part of workshop
MSC Software Simulation in Mechanical Engineering
This workshop is conducted to introduce the participants to the latest development in the field of
numerical analysis for Non-Linear, CFD, Fluid-Structure Interactions, Multi -Body Dynamics
etc. in the field of Research and Development for Aerospace, Automotive and Industrial
Machinery and Consumer electronics. Around 50 participants from various engineering colleges
and industries working in the field of numerical analysis attended the workshop on 16 September
2017. The resource persons were Mr. Bapugowda Patil, General Manager, Quality Control
Division, Toyota Kirloskar Motors, Mr Benat Ebenezer, Channel Sales Manager South India,
MSC Software India, Mr Suraj Kadam, Senior Manager, Technical Altem Technologies & Mr
Sripathy V, Aerospace, CAE Consultant.
Guest lectures conducted at GAT A guest lecture on “Interpretation of Energy Transfer and Coriolis component in Turbo
machines ” by Dr. G R Srinivasa, Former Head, Mechanical Engineering Department,
B.M.S. College Of Engineering & expertise in the field of Turbo Machines, Heat
Transfer and Aero Dynamics is delivered on 23rd August 2017.
A informative talk on “Sustainability Climate Change, Energy & Emissions, Adaptive
Approach” by Mr. R V Simha, Advisor for Airton Consulting Engineers on 27th
September 2017.
A talk by Mr.Parasuraman M , Application Engineer, Axis, Global Automation
Group of companies on “Scope for Mechanical Engineering students in industrial
field of Automation and Robotics” at GAT campus on 19th of February 2018.
An interesting talk on “Basics of Tall Building HVAC design and few case studies” by
Dr. Peter Simmonds, Managing Director,Building & Systems,Analytics LIC was
conducted at GAT campus on 21st day of February 2018.
Mr. Rajashekara H V,Senior Director-Design Institute, IMTMA, BIEC,Bengaluru
interacted effectively on the topic “Opportunities in Manufacturing industry for
Mechanical Engineers” on 26th day of February,2018.
Mr Sharath Tengse, Project Head, Software Development Engine Systems, Continental
Automotive Components-India Private Limited delivered talk on “Power train Trends”
on March 23,2018.
Technical Articles:
Publications in National / International Journals
1. T. K. Rao et al, “Development and Application of FBBFBEM Solution for 3-D Complex-
Shaped Domain" Science Direct, "Materials Today: Proceedings 5 (2018) 335-343. 2214-7853C 2017 Elsevier Ltd.
2. V. Bharat and T. Krishna Rao,"Influence of Mechanical & Tribological Behaviour of Al 2024 MMC Fabricated By Stir Casting Technique - A Review". Science Direct, "Materials Today: Proceedings 5 (2018) 11962-11970. 2214-7853C 2017 Elsevier Ltd.
3. Ranjith P K et al, “Utilization Of Parabolic Trough Collector For Generation Of Hot Working Fluid-A Review”, International JournaL For Innovative research in Science & Technology, vol 4,issue 2,july 2017.
4. Ravi Kumar D. V., Seenappa, C. R. Prakash Rao, V. Bharat "Corrosion Behavior of Cenosphere Reinforced Al7075 Metal Matrix Composite —An Experimental Approach" Journal of Minerals and Materials Characterization and Engineering, 2018, VOLUME 6, pp 424-437.ISSN Online: 2327-4085, ISSN Print: 2327-4077.
5. Ravi Kumar D V, Seenappa, Asha P B, C R Prakash Rao "Influence Of Percent Filler On Tensile Strength, Impact Strength And Wear Properties Of The Al7075-Cenosphere Composite" Materials Today: Proceedings, Volume 5, Issue 5P25, 2018, pp. 11697-11708.
6. Ravi Kumar V "Corrosion and Wear studies on LM6 grade Aluminum - Cenosphere composite–an experimental approach"-2017-18,Volume/Issue5/5P Materials Today: Proceedings 5 (2018) pp. 11667-11677,Elsvier
7. P.B.Asha , C R Prakash Rao , Kiran R , Ravi kumar D V ,"Effect Of Machining Parameters On Cutting Tool Temperature And Tool Life While Turning EN24 And Hchcr Grade Alloy Steel" ,ICMMM 2017, Materials Today: Proceedings 5 (2018) 11819–11826.
8. C R Prakash Rao, Bhagyashekar M S, M.S.Rajagopal, M.VedaVyasa “Influence of Edge Condition of Cutting Tool on Cutting Force and Surface Roughness While Machining Aluminum-Fly Ash Composites”, Materials Today: Proceedings 5 (2018) 11655–11666
9. Poorna Chandra, C R Prakash Rao, Kiran R, V. Ravi kumar “Influence Of Machining Parameter On Cutting Force And Surface Roughness While Turning Alloy Steel” Materials Today: Proceedings 5 (2018) 11794–11801.
10. V. Ravi kumar , C.R. Prakash rao , Poornachandra, R. Suresh "Corrosion and Wear Studies On Lum - Cenosphere Composite – An Experimental Approach" Materials Today: Proceedings Volume 5, Issue 5, Part 2, 2018, Pages 11667–11677.
Publications in National / International Conference
1. H.Srividya Kulkarni, Sri vishnu Bharadwaj ,Sricharan Sudarshan S ,Ghaleppa Presented paper on “An experimental study of use of fly ash (Type-C & Type-F) for shell moulding” at ICON MMEE-2018 on 2& 3 March 2018 at MITE, Mangalore.
2. R. Rajesh and Mithun V. Kulkarni , “Influence of Laser Scan Speed on Bronze Nickel Alloy Produced by Direct Metal Laser Sintering Technique” at MINTSEM-2018, February 1st and 2nd Annamalai university,Chennai.
3. C.R.Prakash Rao, Raju B R, Dhanush P, Karthik, Karthik S Bhoomaraddi “Influence of Back rake angle and Side rake angle of the cutting tool while grooving alloy steel”, National conference on Science, Engineering & Management-NCSEM-2K18, Oxford College of Engineering, Bengaluru-68
4. Ravikumar V International conference Attended on "Advances in Materials and manufacturing Applications" Aug17-19th ,2017.
5. Ravikumar V National conference on Science ,Engineering & Management (NCSEM-2k18),24-25 th May 2018
6. Asha P B, Raju B R, Prakash B, Rithwick V M, Vikram K, Yahiya Khan , “Development and Fabrication of Automated shearing machine” NCSEM – 2K18 on 24th and 25th May 2018.
7. C.R.Prakash Rao , “Influence of Machining Parameters on Surface Roughness while machining Alloy Steel” at NCSEM-2K18 on 24th and 25th May 2018.
8. Ravi Kumar D V, Seenappa, V Ravi Kumar, C R Prakash Rao “Influence of T6-heat treatment on mechanical properties of Al7075 alloy reinforced with Cenosphere” , International Conference on Advances in Materials & Manufacturing applications, (IConAMMA2017), 17-19th August 2017, at Amrita Vishwa Vidyapeetham University, Bangalore.
TECHNICAL FEST –REFUEL 3.0
Department of Mechanical engineering conducted Technical fest on 23rd March,2018.The
event took off with guest lecture on “Power train Trends” from of Mr Sharath
Tengse, Project Head, Software Development Engine Systems, Continental Automotive
Components-India Private Limited. The other events were technical Paper presentations,
Technical quiz e.t.c. apart from Cultural activities and competitions from students.
Sports Achievements
Sl.
no.
Name USN Venue Date Game/
Tournament
Result
01 Udayshankar .
G
1GA15ME113
GAT
27th to 29th
October
,2017.
VTU Netball
Bengaluru Zone
Winners &
Inter Zone
Runners Up
02 Jnanesh B S 1GA15ME034
03 Bharath M
Gulaganji
1GA16ME21
04 Manoj Gowda
H P
1GA15ME053
05 Suhas J S 1GA17ME090
06 Harshith Raj 1GA14ME040 SIT,
Tumkur
15th to 17th
September
2017
VTU Weight
Lifting
Bronze Medal in
56 Kg. Category
Harshith Raj 1GA14ME040 SIT
Tumkur
15th to 17th
September
2017
VTU Power
Lifting
Bronze Medal in
59 Kg. Category
07 Vaishali B M 1GA15ME114 SIT ,
Tumkur
15th to 17th
September
2017
VTU Power
Lifting
Silver 84
Kg.Medal in 59
Kg. Category
08 Akbar Ali 1GA15ME401 Sairam
College Of
Engineering,
Bangalore
6th & 7th
April 2018
VTU Kho Kho Runners UP
09 Abar Khan A 1GA16ME003
10 Hemanth 1GA16ME037
11 BHARATH M
G
1GA16ME021
National
College
Ground,
Basavanagu
di,
Bangalore,
15th & 16th
February
2018
National Level
Handball
Tournament
3rd Place
12 ABHIRAM V 1GA17ME001
13 VISHAL
DINESH
1GA17ME102
14 JNANESH B S 1GA15ME034
15 SUHAS J S 1GA17ME090
16 JNANESH B S 1GA15ME034
ACS
College of
Engineering,
Bengaluru
13th March
2018 VTU Handball
Bengaluru South
Zone Runners Up
&
Inter Zone
Runners Up
17 BHARATH M
G
1GA16ME021
18 MANOJ
GOWDA
1GA15ME053
19 UDAY
SHANKAR
1GA15ME113
20 HARSHITH G 1GA14EC042
21 HEMANTH
GOWDA
1GA17CV405
22 ABHIRAM V 1GA17ME001
23 VISHAL
DINESH
1GA17ME102
24 AKASH R 1GA17ME008
25 Uday Shankar 1GA15ME113
Rajarajesh-
awari
College of
Engineering,
Bengaluru
2nd & 3rd
March
2018.
VTU Inter
collegiate
Volleyball
Participated
26 Manoj Gowda 1GA15ME053
27 Jagadish S 1GA15ME031
28 Madhu H C 1GA16ME419
29 Chandan A 1GA17ME020
30 Suhas J S 1GA17ME090
31 Manjunatha C 1GA17ME051 Punjab
University,
Chandigarh
17th to 21st
January
2018
Cycling 7th place in All
India Inter
University Cycling
Championship
30. Articles
ART & Photo gallery
Pp
Photography Vaishali ,ME ,VI sem, USN: 1GA15ME114
Vision• Become one of the leading providers of education in Mechanical
Engineering with emphasis on research, development and innovationfor the benefit of society
Mission
Impart quality technical education in the field of Mechanical Engineeringthrough excellent teaching-learning process, modern infrastructureand computing tools.
Prepare students for successful careers by providing placements andencouraging research, development and innovation through Industry-Institute Interaction
Instil professional ethics and environmental consciousness amongststudents through inclusive development programs.
Program Details