Post on 15-Jul-2020
THE BOOK2016
2
Each day we wake up and see every new day as an incredible opportunity for us to reshape, reform, and
rethink the way we do things. We ask ourselves: What can we do differently? What can we do better?
How can we be the best? Then we do it. When we brought the original inventors of the in-wall speaker
back together to launch Origin Acoustics, we were presented with an amazing opportunity for us to
draw upon our rich experiences to reinvent the architectural speaker. Our team reflects inward with a
dedicated philosophy marked by evaluation, constant change and improvement. Reinvention—this
is our lifeblood.
Music and sound embellish our lives with vigor. They stir the creative mind, energize the soul, and
move the heart. Our mission at Origin Acoustics is to honor music and the artists of sound by producing
flawless stages for in-home performances. Since inventing the original in-wall speaker four decades
ago, we’ve continued to innovate 1000’s of award winning products. The next two pages of this book
showcase all of our achievements in the industry. Our goal has and always will be to create the best
sounding loudspeakers you can own. We will not stop until this is achieved. Reinvention is what we
live for.
You’ve been deliberately chosen as our partner in your market to help us cultivate an exuberant
community in this industry. We’re forever thankful for your loyal support and demand for what we do,
and don’t take this for granted. We look forward to being more than just a manufacturer to you, but
most importantly a partner and friend in business whom you can share quality and meaningful life
experiences with. We’re in your corner, constantly looking at new ways to serve you best and help your
business flourish. This is our commitment to you.
Seek Reinvention
― Jeremy Burkhardt, CEO
3
5 Levels of Performance 7
More Bass, Less Space 7
Installation is a Zip 9
In-Ceiling Speakers 10
Director Collection 10
New Inventions & Patents 12
Director Dual Tweeter Collection 18
Minimal Opening System 20
Producer Collection 22
Producer Dual Tweeter 24
Thinfit Collection 26
In-Wall Speakers 28
THTR Collection 28
LCR 60 Collection 30
LCR 30 Collection 32
C60 Collection 34
Subwoofers 36
Composer Subwoofers 36
Director Subwoofers 38
Bassic Subwoofers 40
Outdoor Speakers 42
Design Services 42
Seasons Landscape Collection 44
Seasons Landscape Collection Systems 47
Seasons Landscape Mounts 48
Seasons Landscape Amplifiers 49
Acoustascape 50
Seasons Outdoor Collection 52
Electronics 56
Amplifiers 56
Volume Controls 60
Installation Accessories 61
Sound Enclosures 62
New Construction Brackets 63
Paint Shields 64
Cover Plates & Grilles 65
The Origin Family 66
Innovations 68
Contents
4
1994 Offered the first lifetime warranty for architectural speakers.
1994 Introduced SpeakerCraft as its own brand.
1993 Designed first dual voice coil woofers designed into in-ceiling
and in-wall speakers that were not subwoofers.
1991 Designed the world’s first in-wall and in-ceiling speakers
to use a pivoting tweeter to direct the sound towards the
listener.
1988 Designed the world’s first vibration canceling in-ceiling
mounted subwoofer system.
1986 Designed the world’s first in-wall subwoofer system.
1985 Designed and patented first in-wall and new construction
installation bracket.
1984 Molded the first plastic baffle for in-wall installation.
1982 Introduced the first in-wall speakers.
1979 Designed and introduced the first speaker with adjustable
tweeter volume control.
1978 Introduced the first flush mount high fidelity in-ceiling speak-
ers.
Milestones1976 Ken Humphreys & Ed Hasse developed and manufactured
the first architectural loudspeaker.
5
Milestones
2015 Shipping over 140 innovations.
2014 Patent pending for Director Collection loudspeakers.
2013 Patent pending for ZipClip® and SpringLock® tool-less
mounting systems.
2012 Jeremy Burkhardt, Ed Hasse and Ken Humphreys began the
process of reinventing the architectural loudspeaker.
2010 Patented axially stabilized DPSD® tweeter.
2007 Patented AIM® speaker inducted into the CEDIA hall of fame.
2006 Patented the first aimable loudspeaker for in-wall installa-
tion.
2005 Invented the first system to control the iPod® and distribute
both music and metadata throughout the home.
1997 Patented the first “aimable” loudspeaker for in-ceiling instal-
lation.
1996 Patented the I-Beam mounting system.
1995 Introduced the first UL fire-rated enclosure.
1994 Introduced the first snap-on combined metal and plastic
installation bracket.
6
Introducing AcoustaScape by Origin Acoustics... Creatively destructing the landscape market, AcoustaScape
delivers heightened sonic performance outdoors with scalability. Outperforming the competitors on every
level, the AS41 Hi-Fi Landscape Audio System comes complete with 4.25” two-way camouflage plantable
speakers with a separate tweeter and a powerful 8” in-ground subwoofer for a stunning full-range listening
experience outdoors. With the option to add on up to eight satellites, the system provides perfectly even
sound coverage in areas up to 2,500 sqft. Go to page 50 for more information.
7*Patent Pending
Articulate
Precise
Refined
Balanced
8
6
4
2
5 Levels of Performance
Kevlar™ Woofers Pivoting Silk DPSD™ Tweeters
Glass Fiber Woofers
Pivoting Silk DPSD™ Tweeters
Injected Molded Graphite Woofers
Pivoting Aluminum Tweeters
Injected Molded Graphite Woofers
Pivoting Aluminum Tweeters
Origin Acoustics is the most expansive line of architectural speakers
in the world, with designs for almost any and every application.
With five levels of performance, we offer everything from speakers
for a couple hundred dollars a pair, to speakers that have been
reviewed as the finest and best sounding for a few thousand a pair.
We will continue to create the most musically accurate speakers to
impress even the most discerning audiophiles.
Our Director Collection of 3, 6, 8, and 10” in-ceiling speakers come in
round and square grille finishes with five distinct sound signatures.
Our Composer Collection of 10, 12, 15, and 30” in-wall speakers
complete the experience, offering the best immersive audio
experience with the same sonic signature of the Director Collection.
Whether all in-ceiling, all in-wall, or mixed, each model has been
timbre matched with hand-selected materials to perform with an
amazing sonic signature that has been continuously refined by our
engineers for over 40+ years.
Fundamental0Poly/Rubber
WoofersPivoting
Silk Dome Tweeters
8
More Bass, Less SpaceCreating deep dynamic bass requires moving lots
of air. This means bigger drivers and typically big-
ger enclosures. The Origin team has developed a
new design for the Director Collection that allows
us to fit an 8-inch woofer into a typical 6-inch baffle.
Even more impressive we are able to fit a 10-inch
woofer into a typical 8-inch baffle. What does this
mean? It’s more bass in less space. The footprint
in the ceiling is smaller and less obtrusive, but the
sound they deliver must be heard to be believed.
WIDE DISPERSION: Greater dispersion means more coverage from every speaker
and it creates a much larger listening area in every room.
LIMITED DISPERSION: A typical in-ceiling speaker’s tight dispersion pattern creates
a very limited listening area and requires a larger number of speakers to give
adequate coverage in the living space.
PIVOTAL ACTIONS: A full 36° of pivot allows for
incredible flexibility in speaker placement.
PIVOTAL POINT: Although some in-ceiling speakers
can pivot, the angle they can achieve is so small it
requires the speakers to be almost directly overhead.
8
10
6” Cutout
8” Cutout
”
”
Origin Speaker
*Patent Pending
6”
9
Installation is a Zip
The Zip-Clips* are squeezed into place by hand sandwiching the
drywall between the outside flange and the clips inside the wall.
It is important when installing a loudspeaker in
the ceiling that it be stable and secure, restrict-
ing the vibration of the assembly and limiting
transfer of energy into the wall. The revolution-
ary Zip-Clip* (patent pending) system spreads
the weight of the speaker over a larger area than
typical mounting systems accomplishing this
result with minimal effort. Spring-loaded clips
also create more uniform pressure against the
drywall eliminating any warping or distortion
of the speaker baffle as well as eliminating any
stress or cracking of the drywall.
The process requires no tools. A revolution-
ary design that incorporates a mounting ring
that fits into the hole in the drywall and is then
secured by four clips that are hand squeezed
into place creating the optimum amount of
torque to secure the speaker. The speaker as-
sembly is then inserted into the mounting ring
and twisted clockwise to lock it in place.
“It’s obvious that these guys have actually spent time on a ladder installing speakers in the real world because the ZipClip mounting system is revolutionary for simplifying the install process.”
― John Sciacca, Residential Systems Magazine
10
The Director Collection is the culmination of a combined 100+ years in producing the finest
sounding in-ceiling speakers. Every aspect of the Director Collection is purposed towards
producing full-range high fidelity music with as little visibility as possible. Utilizing the finest
materials and a unique pivoting assembly to direct the sound precisely where it is needed,
these speakers become transparent points of sound in any room. Never before has this level
of overall performance been available in an in-ceiling speaker.
Director CollectionIn-Ceiling Audio System
“In overall performance, the Origin Acoustics D108s are the best in-ceiling speakers I have ever heard.”
― Darryl Wilkinson, Sound & Vision Magazine
“…these [D86s] sounded rather less like installation speakers and more like high quality bookshelf models.”
― Stephen Dawson, Connected Home Magazine
11
Director Collection
The Director 60 Collection is both powerful and discreet. Its two-way design in four performance
levels offers a solution for systems that demand sonic purity in smaller spaces. Sharing
technologies with its larger siblings, the 60 Collection will surprise listeners with its detail and
impact.
Better bass response and greater output level in the Director 80 Collection is obvious the
moment it goes active. The unique Tri-Linear Configuration*, three-way driver configuration
features the FocalPoint* mid-tweeter module that pivots to aim the sound in any direction as
needed. However, its most amazing feature is fitting all of this performance into a flush mount
package the size of a standard 6” ceiling speaker. The Director 80 Collection is available in four
performance levels and sets a new sonic standard for speakers in this diameter.
When real dynamic bass from the ceiling is the demand, the Director 100 Collection is the obvious
answer. A massive 10” woofer backs up the incredible FocalPoint* mid/tweeter assembly in
our TriLinear Configuration*. The FocalPoint* also pivots to assure the sound ends up exactly
where it needs to be. In addition, this 10” speaker astoundingly fits into a footprint the size of a
conventional 8”. Choose one of three performance levels and the Director 100 is sure to impress.
Featuring the smallest footprint in the collection, Director 30 speakers offer an even distribution
of sound performance with a minimal aesthetic that mimics designer recessed lighting.
Director 100 Collection
Director 80 Collection
Director 60 Collection
Director 30 Collection
In-Ceiling Audio System
*Patent Pending
12
Tri-Linear Configuration* (TLC)The Director Collection features three drivers in a unique linear alignment. This three-way design allows for broader frequency response and superior power handling. The 3-inch midrange is made of hand-select materials and the tweeter is our proprietary DPSD™ radiator.
7 New Inventions / Patents
Director TechnologyThe ability to point or “direct” the sound toward a specific area in the room is critical when the speakers are mounted in the ceiling. The Director 80 and 100 series features a mid-tweeter assembly that can be adjusted to focus the sound toward the listening area regardless of the speaker’s position in the ceiling. This allows for the speakers to be used in many applications. One example is a home theater where the soundstage, relative to the screen, is crucial. The seating area can be off axis and still remain in the “sweet-spot.”
Dual Plane Stabilized Diaphragm (DPSD™)
A patented innovation that dramatically improves high-frequency performance, the DPSD™ radiator uses a unique suspension design that maintains the tweeters alignment throughout a larger frequency range. The suspension is attached at both the voice-coil and the peak of the dome allowing the driver to be crossed over at a much lower frequency. This results in improved dispersion and decreased distortion.
X-Wave* Woofer SurroundWhile in motion, frequencies between 700-1,400 Hz typically run up the cone of a woofer and are reflected back and forth from the center of the driver. This creates unwanted harmonic distortion. The X-Wave* surround found in Origin woofers absorbs these frequencies reducing distortion and maintaining driver stability. This design also maximizes cone area by reducing the width of the surround.
Progressive SuspensionAs the driver travels to the limits of its excursion, the suspension, made up of the spider and the surround, becomes more rigid, exerting more control on the movement of the cone. The result is increased, clean power output throughout the driver’s frequency range.
Compression Molded Woofer Baskets
Utilizing the latest techniques and materials in plastic fabrication, Origin is able to create basket designs with superior stability and acoustic neutrality. These baskets combine with the driver suspension to increase linearity and improve overall performance.
Zip-Clip* Mounting SystemIt is important when installing a loudspeaker in the ceiling that it be stable and secure, restricting the vibration of the assembly and limiting transfer of energy into the wall. The revolutionary Zip-Clip* system spreads the weight of the speaker over a larger area than typical mounting systems accomplishing this result with minimal effort. Spring-loaded clips also create more uniform pressure against the drywall eliminating any warping or distortion of the speaker baffle.
13
• 10” Kevlar™ woofer• Butyl rubber X-Wave™ surrounds• FocalPoint™ 36° pivoting mid/
tweeter module• Pivoting 4” Kevlar™ midrange• Pivoting ¾” DPSD™ silk dome
tweeter• Zip-Clip* tool-less mounting
• Adjustable woofer/tweeter levels• Frequency Response: 25Hz-20kHz• Impedance: 8 ohm• Power Handling: 50-250 watts• Sensitivity: 91dB ± 3dB• Diameter: 11¼” (286mm)• Cutout Diameter: 10⅜” (264mm)• Mounting Depth: 7½” (188mm)
Director CollectionModel: D108Part: SCD100800
• 10” IMG woofer• Butyl rubber X-Wave™ surrounds• FocalPoint™ 36° pivoting
midtweeter module• Pivoting 4” IMG midrange• Pivoting ¾” aluminum dome
tweeter• Zip-Clip* tool-less mounting
• Adjustable tweeter level• Frequency Response: 28Hz-20kHz• Impedance: 8 ohm• Power Handling: 50-185 watts• Sensitivity: 90dB ± 3dB• Diameter: 11¼” (286mm)• Cutout Diameter: 10⅜” (264mm)• Mounting Depth: 7½” (188mm)
Model: D104Part: SCD100400
• 10” glass fiber woofer• Butyl rubber X-Wave™ surrounds• FocalPoint™ 36° pivoting mid/
tweeter module• Pivoting 4” glass fiber midrange• ¾” DPSD™ silk dome tweeter• Zip-Clip* tool-less mounting• Adjustable woofer/tweeter levels
• Frequency Response: 28Hz-20kHz• Impedance: 8 ohm• Power Handling: 50-200 watts• Sensitivity: 91dB ± 3dB• Diameter: 11¼” (286mm)• Cutout Diameter: 10⅜” (264mm)• Mounting Depth: 7½” (188mm)
Model: D106Part: SCD100600
*Patent Pending
In-Ceiling Speakers
Enclosure: FB10
Bracket: BR10
Enclosure: FB10
Bracket: BR10
Enclosure: FB10
Bracket: BR10
14
• 8” Kevlar™ woofer• Butyl rubber X-Wave™ surrounds• FocalPoint™ 36° pivoting mid/
tweeter module• Pivoting 4” Kevlar™ midrange• Pivoting ¾” DPSD™ silk dome
tweeter• Zip-Clip* tool-less mounting
• Adjustable woofer/tweeter levels• Frequency Response: 30Hz-20kHz• Impedance: 8 ohm• Power Handling: 50-200 watts• Sensitivity: 90dB ± 3dB• Diameter: 10” (254mm)• Cutout Diameter: 8¾” (222mm)• Mounting Depth: 7⅜” (187mm)
Model: D88Part: SCD80800
• 8” glass fiber woofer• Butyl rubber X-Wave™ surrounds• FocalPoint™ 36° pivoting mid/
tweeter module• Pivoting 4” glass fiber midrange• Pivoting ¾” DPSD™ silk dome
tweeter• Zip-Clip* tool-less mounting
• Adjustable woofer/tweeter levels• Frequency Response: 34Hz-20kHz• Impedance: 8 ohm• Power Handling: 50-175 watts• Sensitivity: 90dB ± 3dB• Diameter: 10” (254mm)• Cutout Diameter: 8¾” (222mm)• Mounting Depth: 7⅜” (187mm)
Model: D86Part: SCD80600
Director Collection
All 6” and 8” speakers in the Director and ThinFit Collections fit into the same size hole, giving
you and your customers a flexible upgrade path with models ranging in price from $160/ea to
$1,250/ea MSRP.
16 Different Models With the Same Fit
In-Ceiling Speakers
Enclosure: FBD82X8
Bracket: BR68
Enclosure: FBD82X8
Bracket: BR68
15
• 8” IMG woofer• Butyl rubber X-Wave™ surround• Pivoting 1” aluminum dome
tweeter• Zip-Clip* tool-less mounting
• Frequency Response: 38Hz-20kHz• Impedance: 8 ohm• Power Handling: 50-125 watts• Sensitivity: 89dB ± 3dB• Diameter: 10” (254mm)• Cutout Diameter: 8¾” (222mm)• Mounting Depth: 5⅜” (135mm)
Model: D82Part: SCD80200
• 8” poly/rubber woofer• Butyl rubber X-Wave™ surround• Pivoting 1” silk dome tweeter• Zip-Clip* tool-less mounting
• Frequency Response: 38Hz-20kHz• Impedance: 8 ohm• Power Handling: 20-100 watts• Sensitivity: 87dB ± 3dB• Diameter: 10” (254mm)• Cutout Diameter: 8¾” (222mm)• Mounting Depth: 4” (94mm)
Model: D80Part: SCD80000
Director Collection
• 8” IMG woofer• Butyl rubber X-Wave™ surrounds• FocalPoint™ 36° pivoting mid/
tweeter module• Pivoting 4” IMG midrange• Pivoting ¾” aluminum dome
tweeter• Zip-Clip* tool-less mounting
• Adjustable tweeter level• Frequency Response: 36Hz-20kHz• Impedance: 8 ohm• Power Handling: 50-150 watts• Sensitivity: 89dB ± 3dB• Diameter: 10” (254mm)• Cutout Diameter: 8¾” (222mm)• Mounting Depth: 7⅜” (187mm)
Model: D84Part: SCD80400
*Patent Pending
In-Ceiling Speakers
Enclosure: FBD82X8
Bracket: BR68
Enclosure: FBD82X8FBD82X6
Bracket: BR68
Enclosure: FBD82X8FBD82X6
Bracket: BR68
16
• Pivoting 6½” Kevlar™ woofer• Butyl rubber X-Wave™ surround• Pivoting 1” DPSD™ silk dome
tweeter• Zip-Clip* tool-less mounting• Adjustable bass/treble levels
• Frequency Response: 40Hz-20kHz• Impedance: 8 ohm• Power Handling: 25-160 watts• Sensitivity: 90dB ± 3dB• Diameter: 10” (254mm)• Cutout Diameter: 8¾” (222mm)• Mounting Depth: 5⅜” (135mm)
Model: D68Part: SCD60800
• Pivoting 6½” IMG woofer• Butyl rubber X-Wave™ surround• Pivoting 1” aluminum dome
tweeter• Zip-Clip* tool-less mounting• Adjustable tweeter level
• Frequency Response: 45Hz-20kHz• Impedance: 8 ohm• Power Handling: 25-140 watts• Sensitivity: 89dB ± 3dB• Diameter: 10” (254mm)• Cutout Diameter: 8¾” (222mm)• Mounting Depth: 5⅜” (135mm)
Model: D64Part: SCD60400
• Pivoting 6½” glass fiber woofer• Butyl rubber X-Wave™ surround• Pivoting 1” DPSD™ silk dome
tweeter• Zip-Clip* tool-less mounting• Adjustable bass/treble levels
• Frequency Response: 43Hz-20kHz• Impedance: 8 ohm• Power Handling: 25-150 watts• Sensitivity: 90dB ± 3dB• Diameter: 10” (254mm)• Cutout Diameter: 8¾” (222mm)• Mounting Depth: 5⅜” (135mm)
Model: D66Part: SCD60600
Director CollectionIn-Ceiling Speakers
Enclosure: FBD82X8FBD82X6
Bracket: BR68
Enclosure: FBD82X8FBD82X6
Bracket: BR68
Enclosure: FBD82X8FBD82X6
Bracket: BR68
17
• 6½” IMG woofer• Butyl rubber X-Wave™ surround• Pivoting 1” aluminum dome
tweeter• Zip-Clip* tool-less mounting
• Frequency Response: 48Hz-20kHz• Impedance: 8 ohm• Power Handling: 25-125 watts• Sensitivity: 89dB ± 3dB• Diameter: 10” (254mm)• Cutout Diameter: 8¾” (222mm)• Mounting Depth: 33∕5” (92 mm)
Director CollectionModel: D62Part: SCD60200
• 3” Kevlar™ woofer• Butyl rubber X-Wave™ surround• Silk DPSD™ tweeter• Zip-Clip* tool-less mounting• Available with round or square
bezel-less magnetic grilles
• Frequency Response: 75Hz-20kHz• Impedance: 8 ohm• Power Handling: 20-100 watts• Sensitivity: 83dB ± 3dB• Diameter: 41⁄4” (108mm)• Cutout Diameter: 3.25” (83mm)• Mounting Depth: 3⅓” (86mm)
Model: D38Part: SCD30800
• 6½” poly/rubber woofer• Butyl rubber X-Wave™ surround• Pivoting 1” silk dome tweeter• Zip-Clip* tool-less mounting
• Frequency Response: 48Hz-20kHz• Impedance: 8 ohm• Power Handling: 20-100 watts• Sensitivity: 86dB ± 3dB• Diameter: 10” (254mm)• Cutout Diameter: 8¾” (222mm)• Mounting Depth: 33∕5” (92 mm)
Model: D60Part: SCD60000
*Patent Pending
In-Ceiling Speakers
Enclosure: FBD82X8FBD82X6
Bracket: BR68
Enclosure: FBD82X8FBD82X6
Bracket: BR68
Bracket: BR3
18
What about sound in those areas that don’t require or even allow
for a stereo pair of speakers? The Director D82 and D62 DT/SUR will
reproduce both the left and right channels from a single speaker.
Now bathrooms, hallways, even walk-in closets can be filled with
music.
The flexibility of the Director D82 and D62 DT/SUR doesn’t end with
their single-speaker stereo capability. A switch on the back of the
speaker can convert it to a dedicated surround speaker in a dipole
configuration. This enhances dispersion enveloping the listener in
rear-channel ambiance in home theater applications.
Director Dual TweeterIn-Ceiling Speakers
19
• 8” DVC IMG woofer• Butyl rubber X-Wave™ surround• 1” dual aluminum tweeters• 2 channels from a single speaker• Zip-Clip* tool-less mounting• Switchable to single channel
surround
• Frequency Response: 38Hz-20kHz• Impedance: 8 ohm• Power Handling: 50-125 watts• Sensitivity: 89dB ± 3dB• Diameter: 10” (254mm)• Cutout Diameter: 8¾” (222mm)• Mounting Depth: 33∕5” (92 mm)
Model: D82DT/SURPart: SCD2T80200
• 6½” poly/rubber woofer• Butyl rubber X-Wave™ surround• 1” dual silk tweeters• 2 channels from a single speaker• Zip-Clip* tool-less mounting
• Frequency Response: 48Hz-20kHz• Impedance: 8 ± 8 ohm• Power Handling: 20-100 watts• Sensitivity: 86dB ± 3dB• Diameter: 10” (254mm)• Cutout Diameter: 8¾” (222mm)• Mounting Depth: 33∕5” (92 mm)
Model: D60DTPart: SCD2T60000
• 6½” DVC IMG woofer• Butyl rubber X-Wave™ surround• 1” dual aluminum tweeters• 2 channels from a single speaker• Zip-Clip* tool-less mounting• Switchable to single channel
surround
• Frequency Response: 48Hz-20kHz• Impedance: 8 ohm• Power Handling: 25-125 watts• Sensitivity: 89dB ± 3dB• Diameter: 10” (254mm)• Cutout Diameter: 8¾” (222mm)• Mounting Depth: 33∕5” (92 mm)
Model: D62DT/SURPart: SCD2T60200
Director DT Collection
*Patent Pending
In-Ceiling Speakers
Enclosure: FBD82X8FBD82X6
Bracket: BR68
Enclosure: FBD82X8FBD82X6
Bracket: BR68
Enclosure: FBD82X8FBD82X6
Bracket: BR68
20
The increasing popularity of smaller recessed light opening has
created a huge demand for speakers that “line up” with ceiling
lighting. Delivering even under the meticulous constraints of the
interior design community, the Director Minimal Opening System
leaves the smallest visible imprint, whether the lights are square or
round, without compromising sound quality. Minified 3” Director
satellites and a unique bandpass in-ceiling subwoofer line up with
the lights to form a musical arrangement with spotless coverage
and full-range output.
Minimal Opening™ SystemIn-Ceiling Audio System
21
The Director Minimal Opening System leaves a 4” finish to match interior lighting. This package includes
four D38s with square and round grilles, an in-ceiling subwoofer with the 4” trim finish kit and port tube to
match. We recommend using the SUBA150 subwoofer amplifier for the DSUB6F3 to augment the low-end
bass response of the system and the A2150 two-channel amplifier for the four D38 satellites. The package
distributes a full-frequency performance disguised in the appearance small aperture home lighting.
• DSUB6F3: Dual 6” Subwoofer• D38: 3” Kevlar™ Speakers (4)• MDF Band Pass Enclosure• 4” Port Tube• Port Tube Length:19” (480mm)
• Mini-Port Connector • New Construction bracket• 4¼” Square & Round Grilles• L/R In & Out Terminals
Model: DMO3Part: DMO3000
Minimal Opening™ SystemIn-Ceiling Audio System
Line it up with the Lights
• Frequency Response: 37Hz-20kHz• Power Handling: 100 Watts• Impedance: 8 ohm
• Sensitivity: 86dB ± 3dB• Diameter: 4¼” (108mm)• Cutout Diameter: 3½” (89mm)
System Specifications
Recommended Amplification
Model: A2150Part: AMP02X15000
• Two Channel, Stereo Amplifier • 150 watts of Class D power per channel
22
Carefully crafted with an impressive price to performance ratio, the
Producer Collection is our entry-level offering that is anything but
entry-level in sound quality. With five in-ceiling models there are
a variety of options for any number of applications. The collection
includes two dual-tweeter models producing stereo from a single
speaker, a perfect solution for hallways, bathrooms and walk-in
closets.
Producer CollectionIn-Ceiling Speakers
23
• 8” polypropylene woofer• Pivoting 1” silk dome tweeter• Butyl rubber surround
• Frequency Response: 38Hz-20kHz• Impedance: 8 ohm• Power Handling: 5-100 watts• Sensitivity: 88dB ± 3dB• Diameter: 10¾” (273mm)• Cutout Diameter: 9¾” (247mm)• Mounting Depth: 3⅞” (96mm)
Model: P80Part: SCP80100
• 6½” polypropylene woofer• Pivoting 1” silk dome tweeter• Butyl rubber surround
• Frequency Response: 48Hz-20kHz• Impedance: 8 ohm• Power Handling: 5-100 watts• Sensitivity: 86dB ± 3dB• Diameter: 8¾” (223mm)• Cutout Diameter: 8” (202mm)• Mounting Depth: 3⅝” (90mm)
Model: P60Part: SCP60100
• 6½” IMG woofer• Pivoting 1” aluminum dome
tweeter• Butyl rubber surround
• Frequency Response: 48Hz-20kHz• Impedance: 8 ohm• Power Handling: 5-100 watts• Sensitivity: 86dB ± 3dB• Diameter: 8¾” (223mm)• Cutout Diameter: 8” (202mm)• Mounting Depth: 3⅝” (90mm)
Model: P61Part: SCP60150
Producer CollectionIn-Ceiling Speakers
Enclosure: FBP8
Bracket: BRP8
Enclosure: FBP6
Bracket: BRP6
Enclosure: FBP6
Bracket: BRP6
24
Stereo from a single speaker is advantageous when the system
blends stereo pairs and single speakers in the same zone. There is
no need to electronically change the system to a mono signal and
feed these speakers independently of their stereo counterparts.
Both channels are reproduced from a single location, perfect for
smaller rooms or hallways.
Producer Dual TweeterIn-Ceiling Speakers
25
• 8” DVC polypropylene woofer• Butyl rubber surround• 1” dual silk dome tweeters• 2 channels from a single speaker
• Frequency Response: 38Hz-20kHz• Impedance: 8 ohm• Power Handling: 5-100 watts• Sensitivity: 88dB ± 3dB• Diameter: 10¾” (273mm)• Cutout Diameter: 9¾” (247mm)• Mounting Depth: 3⅞” (96mm)
Model: P80DTPart: SCP2T80100
• 6½” DVC polypropylene woofer• Butyl rubber surround• 1” dual silk dome tweeters• 2 channels from a single speaker
• Frequency Response: 48Hz-20kHz• Impedance: 8 ohm• Power Handling: 5-100 watts• Sensitivity: 86dB ± 3dB• Diameter: 8¾” (223mm)• Cutout Diameter: 8” (202mm)• Mounting Depth: 3⅝” (90mm)
Model: P60DTPart: SCP2T60400
Producer Dual Tweeter
*Patent Pending
In-Ceiling Speakers
Enclosure: FBP8
Bracket: BRP8
Enclosure: FBP6
Bracket: BRP6
26
Designed as a solution for restrictive installation applications, the
ThinFit Collection addresses the need for a shallow-mount speaker
with a depth of only 70mm. The fully integrated acoustic enclosures
protect the inner part of the speaker, improve sonic consistency, and
limit the transfer of sound into adjoining rooms. All three models
fit into the standard 6”/8” Director new construction bracket and
include a sleek bezel-less grille.
ThinFit CollectionShallow-Depth In-Ceiling Speakers
27
• Dual 3½” glass fiber woofers • Dual 3½” glass fiber Mid-woofers • Butyl rubber surrounds • ¾” DPSD™ dome tweeter • Integrated powder-coated steel
acoustic enclosure
• Frequency Response: 50Hz-20kHz • Impedance: 8 ohm • Power Handling: 5-110 watts • Sensitivity: 89dB ± 3dB • Diameter: 9⅝” (244mm)• Cutout Diameter: 8¾” (222mm) • Mounting Depth: 2¾” (70mm)
Model: TF36Part: STF3600
• 6½” IMG DVC woofer• Butyl rubber X-Wave* surround• ¾” dual aluminum dome tweeters• Integrated powder-coated steel
acoustic enclosure
• Frequency Response: 45Hz-20kHz• Impedance: 8 ohm• Power Handling: 5-140 watts• Sensitivity: 89dB ± 3dB• Diameter: 9⅝” (244mm)• Cutout Diameter: 8¾” (222mm)• Mounting Depth: 2¾” (70mm)
Model:TF64DTPart: STF2T6400
• Dual 3½” IMG woofers• Dual 3½” IMG mid-woofers• Butyl rubber surrounds• ¾” aluminum dome tweeter• Integrated powder-coated steel
acoustic enclosure
• Frequency Response: 55Hz-20kHz• Impedance: 8 ohm• Power Handling: 5-90 watts• Sensitivity: 89dB ± 3dB• Diameter: 9⅝” (244mm)• Cutout Diameter: 8¾” (222mm)• Mounting Depth: 2¾” (70mm)
Model: TF34Part: STF3400
ThinFit Collection
*Patent Pending
Shallow-Depth In-Ceiling Speakers
Enclosure: FBD82X6
Bracket: BR68
Enclosure: FBD82X6
Bracket: BR68
Enclosure: FBD82X6
Bracket: BR68
28
Home Theater envelops us and allows anyone to escape into the greatest worlds man
can imagine. From a simple 5.1 set up to the most amazing Dolby Atmos system, cinema
is all about creating an immersive reality with sound detailed every bit as rich and full as
real life.
The Theater Collection uses larger woofers and midrange drivers than any
design we have engineered before. Quad six and a half inch drivers partner
with our patented DPSD™ 1” tweeter to deliver the accuracy and sonic
linearity that was once only reserved for the worlds finest box speakers. We
are proud of our new collection and know they will exceed the most critical
expectations.
THTR CollectionIn-Wall Home Theater Speakers
“I loved how the bass line sat in the soundstage behind the vocals with enough clarity to hear each individual note without sounding mushy.”
― Robert Archer, CE Pro Magazine
29
• 6½” Kevlar™ woofers • Butyl rubber surround• Pivoting 1” DPSD™ silk dome
tweeter• Three-way crossover• Spring-Lock* tool-less mounting
• Frequency Response: 38Hz-20kHz• Impedance: 8 ohm• Power Handling: 25-200 watts• Sensitivity: 90 ± 3dB• Dimensions: 8.875x30.125”
(225x765mm)• Cutout Dimensions: 7.875x29”
(200x737mm)• Mounting Depth: 3¾” (95mm)
Model: THTR68Part: SWML30800
• 6½” glass fiber woofers• Butyl rubber surround• Pivoting 1” DPSD™ silk dome
tweeter• Three-way crossover• Spring-Lock* tool-less mounting
• Frequency Response: 40Hz-20kHz• Impedance: 8 ohm• Power Handling: 25-200 watts• Sensitivity: 90 ± 3dB• Dimensions: 8.875x30.125”
(225x765mm)• Cutout Dimensions: 7.875x29”
(200x737mm)• Mounting Depth: 3¾” (95mm)
Model: THTR66Part: SWML30600
THTR Collection
*Patent Pending
In-Wall Home Theater Speakers
Bracket: BRL30
Bracket: BRL30
30
Delivering impact and clarity, the Composer LCR60 Collection
has the right combination of size and performance to create an
immersive sonic experience in any room. Whether being used as the
front and rear channels of a home theater or as a stereo pair for a
dedicated music system, these speakers will reproduce every detail
with precision while remaining hidden in the wall.
LCR 60 CollectionIn-Wall Speakers
31
• Dual 6½” Kevlar™ woofers• Butyl rubber surrounds• Pivoting 1” DPSD™ silk dome
tweeter• Adjustable woofer/tweeter levels• Spring-Lock* tool-less mounting• Fits between 16” on-center studs
• Frequency Response: 53Hz-20kHz• Impedance: 8 ohm• Power Handling: 25-175 watts• Sensitivity: 90dB ± 3dB• Dimensions: 7.875 x 15.563” (200 x
395mm)• Cutout Dimensions: 6⅝ x 14⅜”
(168 x 364mm)• Mounting Depth: 3¾” (95mm)
Model: LCR68Part: SWML14800
• Dual 6½” IMG woofer• Butyl rubber X-Wave™ surrounds• Pivoting 1” aluminum dome
tweeter• Spring-Lock* tool-less mounting• Adjustable tweeter level• Fits between 16” on-center studs
• Frequency Response: 55Hz-20kHz• Impedance: 8 ohm• Power Handling: 25-150 watts• Sensitivity: 90dB ± 3dB• Dimensions: 7.875 x 15.563” (200 x
395mm)• Cutout Dimensions: 6⅝ x 14⅜”
(168 x 364mm)• Mounting Depth: 3¾” (95mm)
Model:LCR64Part: SWML14400
• Dual 6½” glass fiber woofers• Butyl rubber surrounds• Pivoting 1” DPSD™ silk dome
tweeter• Adjustable woofer/tweeter levels• Spring-Lock* tool-less mounting• Fits between 16” on-center studs
• Frequency Response: 55Hz-20kHz• Impedance: 8 ohm• Power Handling: 25-150 watts• Sensitivity: 90dB ± 3dB• Dimensions: 7.875 x 15.563” (200 x
395mm)• Cutout Dimensions: 6⅝ x 14⅜”
(168 x 364mm)• Mounting Depth: 3¾” (95mm)
Model: LCR66Part: SWML14600
LCR 60 Collection
*Patent Pending
In-Wall Speakers
Enclosure: FB15S
Bracket: BRL15
Enclosure: FB15S
Bracket: BRL15
Enclosure: FB15S
Bracket: BRL15
32
When space becomes a major consideration, finding a speaker that
is both diminutive yet still packs a punch is not easy. Fortunately
the Composer LCR30 Collection fits the bill. It borrows from the
technology of its larger siblings and delivers remarkable sound
quality in a package that is downright tiny. But don’t let its size
mislead you. This is real sound for installations that require the
smallest footprint possible.
LCR 30 CollectionIn-Wall Speakers
33
• Dual 3½” Kevlar™ woofers• Butyl rubber X-Wave* surrounds• Pivoting 1” DPSD™ silk dome
tweeter• Adjustable woofer/tweeter levels• Spring-Lock™ tool-less mounting
• Frequency Response: 70Hz-20kHz• Impedance: 8 ohm• Power Handling: 25-80 watts• Sensitivity: 90dB ± 3dB• Dimensions: 5.688 x 10.625” (144 x
270mm)• Cutout Dimensions: 4⅜ x 9½” (122
x 240mm)• Mounting Depth: 3¾” (95mm)
Model: LCR38Part: SWML10800
• Dual 3½” glass fiber woofers• Butyl rubber X-Wave* surrounds• Pivoting 1” DPSD™ silk dome
tweeter• Adjustable woofer/tweeter levels• Spring-Lock™ tool-less mounting
• Frequency Response: 70Hz-20kHz• Impedance: 8 ohm• Power Handling: 25-80 watts• Sensitivity: 90dB ± 3dB• Dimensions: 5.688 x 10.625” (144 x
270mm)• Cutout Dimensions: 4⅜ x 9½” (122
x 240mm)• Mounting Depth: 3¾” (95mm)
Model: LCR36Part: SWML10600
LCR 30 Collection
*Patent Pending
In-Wall Speakers
Enclosure: FB10S
Bracket: BRL10
Enclosure: FB10S
Bracket: BRL10
34
When the paradigm shift from cabinet speakers to in-wall speakers
took place decades ago, this was the size for which everyone
clamored. It was small enough to be discreet while being large
enough to produce both full frequency and enough sound pressure
to fill a room. The C60 Collection dramatically renews this tradition
with advanced driver technology and a very attractive form factor.
It is perfect in the bedroom or the bathroom and is great for both
music and theater sound.
C60 CollectionIn-Wall Speakers
35
• 4x8” Kevlar™ woofer• Butyl rubber X-Wave* surround• Pivoting 1” DPSD™ silk dome tweeter• Adjustable woofer/tweeter levels• Spring-Lock™ tool-less mounting• Frequency Response: 40Hz-20kHz• Impedance: 8 ohm
• Power Handling: 25-140 watts• Sensitivity: 89dB ± 3dB• Dimensions: 5.75 x 12” (140 x 305mm)• Cutout Dimensions: 4⅝ x 11” (118 x
278mm)• Mounting Depth: 3¾” (95mm)
Model: C68Part: SWM12800
• 4x8” IMG woofer• Butyl rubber X-Wave* surround• Pivoting 1” aluminum dome tweeter• Spring-Lock™ tool-less mounting• Adjustable tweeter levels• Frequency Response: 45Hz-20kHz• Impedance: 8 ohm
• Power Handling: 25-110 watts• Sensitivity: 89dB ± 3dB• Dimensions: 5.75 x 12” (140 x 305mm)• Cutout Dimensions: 4⅝ x 11” (118 x
278mm)• Mounting Depth: 3¾” (95mm)
Model: C64Part: SWM12400
• 4x8” glass fiber woofer• Butyl rubber X-Wave* surround• Pivoting 1” DPSD™ silk dome tweeter• Adjustable woofer/tweeter levels• Spring-Lock™ tool-less mounting• Frequency Response: 43Hz-20kHz• Impedance: 8 ohm
• Power Handling: 25-125 watts• Sensitivity: 89dB ± 3dB• Dimensions: 5.75 x 12” (140 x 305mm)• Cutout Dimensions: 4⅝ x 11” (118 x
278mm)• Mounting Depth: 3¾” (95mm)
Model: C66Part: SWM12600
C60 Collection
*Patent Pending
• 4x8” IMG woofer• Butyl rubber X-Wave* surround• Pivoting 1” aluminum dome tweeter• Spring-Lock™ tool-less mounting• Frequency Response: 45Hz-20kHz• Impedance: 8 ohm• Power Handling: 25-110 watts
• Sensitivity: 89dB ± 3dB• Dimensions: 5.75 x 12” (140 x 305mm)• Cutout Dimensions: 4⅝ x 11” (118 x
278mm)• Mounting Depth: 3¾” (95mm)
Model: C62Part: SWM12200
In-Wall Speakers
Enclosure: FB12S
Bracket: BRL12
Enclosure: FB12S
Bracket: BRL12
Enclosure: FB12S
Bracket: BRL12
Enclosure: FB12S
Bracket: BRL12
36
No audio system is complete without the presence of deep powerful
bass. Since inventing the in-wall subwoofer back in the 1980’s, the
Origin Acoustics team has learned many tricks of the trade. The
Composer In-Wall subwoofers are a true culmination of over 30
years in engineering the highest performing subs within the lowest
profile enclosures.
The aluminum build of our in-wall subwoofers provides tremendous
acoustical enhancements. By using dense pure aluminum cabinets
instead of MDF we’re able to increase the air volume driving the
cone’s powerful pulse. The extremely low resonance frequency and
efficient dissipation of heat make our aluminum subwoofers more
than capable of adding a deep dose of bass without shaking the
walls.
Composer SubwoofersIn-Wall Subwoofers
37
• 10” Aluminum Long Throw Subwoofer
• Rubber Sound Dampening• Mountable Faceplate & Woofer for
CSUB10NCE• Must be used with CSUB10NCE
(Enclosure)
• Must be used with Origin SUBA150 or SUBA500 DSP Amps (sold separately)
• Frequency Response: 30Hz-250Hz• Power Handling: 250 watts• Dimensions: 3.5 x 13 x 44” (88 x 330
x 1120mm)• Cutout Dimensions: 10.55 x 10.55”
(268 x 268mm)
Model: CSUB10NPart: CSUB1000AN
• 10” Aluminum Long Throw Subwoofer
• Rubber Sound Dampening• Aluminum Slide enclosure with
CabinSpace™ Cap• Must be used with Origin SUBA150
or SUBA500 DSP Amps (sold separately)
• Frequency Response: 33Hz-250Hz• Power Handling: 250 watts• Dimensions: 3.5 x 13 x 17” (88 x 330
x 430mm)• Cutout Dimensions: 10.55 x 10.55”
(268 x 268mm)
Model: CSUB10RPart: CSUB10000AR
Composer Subwoofers
*Patent Pending
Model: CSUB10NCEPart: CSUB10000NCE
• Ultra Dense Aluminum Cabinet• High-Wire™ Progressive
Suspension Mounting System• Must be used with CSUB10N• Top & Bottom Dual Voice Coil
Inputs
• Dimensions: 3.5 x 13 x 44” (88 x 330 x 1120mm)
• Cutout Dimensions: 10.55 x 10.55” (268 x 268mm)
Model: SUBA500Part: AMPSUB1X500
• 500 Watt Subwoofer Amplifier w/ DSP Presets
Model: SUBA150Part: AMPSUB1X150
• 150 Watt Subwoofer Amplifier
In-Wall Subwoofers
38
The Director Dual 6.5” Multi-Finish In-Ceiling Subwoofer delivers
tight bass with flexible port options to match either small 4” light-
ing opening or any 6” and 8” speakers in the Director Collection.
Carefully engineered with a dual-firing woofer design and bandpass
enclosure, the DSUB6 brings bass to the forefront of any in-ceiling
performance with unmatched aesthetics.
Director SubwoofersMulti-Finish In-Ceiling Subwoofers
39
• Dual 6” Anti-Vibration Woofers• MDF band pass enclosure• 4” Port Tube• Port Tube Length: 19” (480mm)• Mini-port connector • New Construction bracket• 4¼” Square & Round Grilles• L/R In & Out Terminals
• Frequency Response: 33Hz-20kHz• Power Handling: 100 Watts• Impedance: 8 ohm• Sensitivity: 87dB ± 3dB• Dimensions: 7.9 x 11.75 x 17” (200 x
298 x 430mm)• Diameter: 4¼” (108mm)• Cutout Diameter: 3½” (89mm)
Director Subwoofers
*Patent Pending
Multi-Finish In-Ceiling Subwoofers
Model: DSUB6F3Part: DSUB6F300
• Dual 6” Anti-Vibration Woofers• MDF band pass enclosure• 6” Port Tube• Port Tube Length: 29½ (750mm)• Zip-Clip* tool-less mounting• Port Adapter• BR68 New Construction bracket• 9⅝” Round Grille Included (SQ68:
Square Grille Sold Separately)
• L/R In & Out Terminals• Frequency Response: 33Hz-20Hz• Power Handling: 150 Watts• Impedance: 6 ohm• Sensitivity: 87dB ± 3dB• Dimensions: 7.9 x 11.75 x 17” (200 x
298 x 430mm)• Diameter: 10” (254mm)• Cutout Diameter: 8¾” (222mm)
Model: DSUB6F68Part: DSUB6F680
Model: SUBA150Part: AMP02X15000
• One Channel, Stereo Amplifier • 1U Compact Design
Recommended Amplification
40
Bass frequencies are the foundation of any audio
performance. They fill the room with impact and
drive emotion in every listening session. The Bassic
Subwoofers deliver this dramatic and dynamic portion
of the sound experience through the matching of rugged
and powerful amplification with high-performance
drivers. The Bassic Subwoofers are available in four
sizes with 8-inch, 10-inch and 12-inch drivers powered
by 100, 150 and 250 watts of digital amplification.
Bassic SubwoofersSubwoofers
41
• 12” Aluminum woofer• Front mounted controls• Inputs: L/R Line level, LFE, High
level speaker• Outputs: High level speaker output
• Controls: Level, Phase, Crossover• Power Rating: Class D 250 Watts• WxHxD: 18” x 16” x 18½”• High gloss finish
Model: SUB12Part: SBXSUB1200800
• 8” Aluminum woofer• Inputs: L/R Line level, LFE, High
level speaker• Outputs: High level speaker output• Controls: Level, Phase, Crossover
• Power Rating: Class D 100 Watts• WxHxD: 12” x 12” x 12”• High gloss finish
Model:SUB8Part: SBXSUB80400
• 10” Aluminum woofer• Front mounted controls• Inputs: L/R Line level, LFE, High
level speaker• Outputs: High level speaker output
• Controls: Level, Phase, Crossover• Power Rating: Class D 150 Watts• WxHxD: 16” x 14” x 16”• High gloss finish
Model: SUB10Part: SBXSUB100600
Bassic Subwoofers
*Patent Pending
• 10” Aluminum woofer• Inputs: L/R Line level, LFE• USB 5.V for charging wireless
adapters• Controls: Level, Phase, Crossover
• Power Rating: Class D 150 Watts• WxHxD: 13” x 13” x 13”• Black ash vinyl finish
Model:SUBV10Part: SBXSUBV100600
Subwoofers
42
Landscape Design Services
We understand that designing a perfect landscape system to WOW your customers can be chal-
lenging and time-consuming. Origin Acoustics has committed top talent from their team to
provide you and your client with amazing turn-key landscape system designs, complete with
detailed illustrations and instructions for installation as well as a detailed proposal with system
pricing. In utilizing this service, we’ve found that our dealers are able to close more jobs and
generate 2 to 3 times more revenue.
To learn more about this awesome program, contact our office at 844.674.4461
Step 1Log in to the Origin website and fill out
the “Design Services Questionaire”
found under Dealer Resources. Submit
the completed form via email to sales@
originacoustics.com. This will provide
our team with basic information regard-
ing your client’s expectations to get us
started.
Step 3Present your client with the exclusive
materials provided by the Origin Design
Services team and close the deal on pro-
viding them with the ultimate outdoor
listening experience, custom-tailored to
their needs.
Step 2Allow us to quickly prepare a custom-
ized speaker layout diagram using your
client’s landscape, a product proposal,
and a powerpoint presentation with
system specifications and easy to read
installation instructions.
Landscape Audio System
43
Landscape Design Services
*Patent Pending
Custom Tailored Landscape Audio Systems
Landscape Audio System
44
Filling your outdoor environment with quality music that appears to
come from nowhere is now a very real expectation. The Landscape
Collection includes two models of speakers in enclosures that mimic
lighting fixtures. To create an even more dramatic presence, the
Collection includes high-performance subwoofers that are buried in the
ground and completely fill out the bottom end. Hidden away in flower
beds and planters or placed around the pool or other water features,
these speakers can fill the entire yard with a sound that is sure to
enhance every outdoor event from a pool party to a wedding reception.
Seasons Landscape CollectionLandscape Audio System
45*Patent Pending
• 6” polypropylene woofer• 1” titanium dome tweeter• Passive radiator• PolyComposite, weather resistant enclosure• Switchable 8-ohm and multiple 70v taps• Frequency Response: 60Hz-20kHz ± 3dB
Model: LS64Part: OLS6600
• 4” polypropylene woofer• .75” titanium dome tweeter• PolyComposite, weather resistant enclosure• Switchable 8-ohm and multiple 70v taps• Frequency Response: 80Hz-20kHz ± 3dB
Model: LS44Part: OLS4400
Seasons Landscape Collection
Mounts Sold Separtately
Mounts Sold Separtately
Landscape Satellite Speakers
46
• 12” polypropylene woofer• PolyComposite, weather resistant enclosure• 70v• In-ground installation
Model: OSUB12Part: OSUB12000
• 10” polypropylene woofer• PolyComposite, weather resistant enclosure• 70v• In-ground installation
Model: OSUB10Part: OSUB10000
Seasons Landscape Collection
• 8” polypropylene woofer• PolyComposite, weather resistant enclosure• Switchable 8-ohm and 70v• In-ground installation
Model: OSUB8Part: OSUB8000
Landscape Subwoofers
47
Suggested Landscape Systems
Satellites• LS44 (8 each)
Subwoofers• OSUB8 (2 each)
Amplifier• CDi1000 (OA DSP)
Satellites• LS44 (8 each)
Subwoofers• OSUB10 (2 each)
Amplifier• CDi1000 (OA DSP)
*Patent Pending
Satellites• LS64 (8 each)
Subwoofers• OSUB10 (2 each)
Amplifier• CDi1000 (OA DSP)
Satellites• LS64 (8 each)
Subwoofers• OSUB12 (2 each)
Amplifier• CDi1000 (OA DSP)
Mounts Sold Separately
+ +
Mounts Sold Separately
+ +
Mounts Sold Separately
+ +
Mounts Sold Separately
+ +
Landscape Audio Systems
48
• Tree Mount
Model: LSTMPart: OLATM1000
• Surface Mount
Model: LSFMPart: OLAFM1000
Seasons Landscape MountsVarious mounting options for the Landscape speakers create a substantial level of flexibility when
designing an outdoor system. The large and small spikes can be driven into the ground in the lawn,
flowerbeds and planters where the speakers can be discreetly hidden by plants and shrubs. The Tree
Mount allows the speakers to be mounted above the ground on tree limbs or trunks. The surface
Mount can be secured to any flat surface such as decks, pilasters, hand rails, the sides of buildings
or under the eaves. The direction of the speakers can then be adjusted to focus the sound at the
listening area.
• Large Spike
Model: LSLSPart: OLALS1000
• Small Spike
Model: LSSSPart: OLASS1000
Landscape Accessories
49
Seasons Landscape Amplifiers
A dedicated high-current amplifier delivering earth-shaking power drives this enclosure. This
amp resides with the source components remotely positioned so as to protect them from the
elements.
Seasons Amplifiers
The Crown CDi amplifiers are perfect for driving any of the Landscape Collection Satellites and
Subwoofers. Operating in either 8 ohm or 70v mode, both amplifiers delivers incredible and reli-
able power with onboard DSP.
Crown CDi Amplifiers
Model: CDi1000Crown by Harman
Model: CDi2000Crown by Harman
• Includes Origin Acoustics Seasons Landscape DSP Presets
• Accurate, uncolored sound with very low distortion for the best in music and voice reproduction
• Extremely versatile; rated for 2, 4, 8 ohm loads and 70V/100V and 140V outputs
• Advanced protection circuitry guards against: shorted outputs, open circuits, DC, mismatched loads, general overheating, high-frequency over- loads and internal faults
• Intuitive front-panel LCD screen for quick, easy configuration
• Switch-mode universal power supply • Onboard digital signal processing includes
cross- overs, EQ filters, delay, and output limiting
• 2 Channels• Rated Power Output (per Channel @ 4 ohms):
CDi1000: 500 Watts per channel CDi2000: 800 Watts per channel
• Signal to Noise Ratio (below rated 1kHz power at 8 ohms) : 100 dB (A weighted)
• Total Harmonic Distortion: 0.5% • Dimension: (HxWxD) 3½” x 19” x 12.25”
*Patent Pending
Landscape Amplifiers
50
The Acoustascape AS41 Hi-Fi Landscape Audio System brings
stunning surround sound to the backyard with four 4.5” cam-
ouflage enclosed satellite speakers and a bass-boosting 8” in-
ground subwoofer. The AS41 System projects perfectly even
sound coverage directly into the listening area with equal vol-
ume, turning the whole outdoor space into a sweet spot with-
out causing a disturbance to neighbors… All while remaining
completely hidden from sight in landscape foliage. Expand
the system with up to four AS4SAT speakers for coverage up to
2,500 square feet*.
Receiver AS41SYS AS4SAT AS4SAT
51*Patent Pending
• 4.5” polypropylene woofer• 0.75” PEI dome tweeter• HDPE, non-corrosive sealed
enclosure• 8” dual voice coil polypropylene
woofer
• Weatherproof aluminum mushroom head
• 8-ohms per channel nominal• Frequency Response: 39Hz-20kHz
± 3dB
Satellites• AS4SAT(4 each)
Subwoofers• AS8SUB (1 each)
+
Model: AS41SYSPart: AS4100SYS
Satellites• AS4SAT (1 pair)
Model: AS4SATPart: AS4000SAT
• 4.5” polypropylene woofer• 0.75” PEI dome tweeter• HDPE, non-corrosive sealed
enclosure
• 6-ohm with 6 Sats• 4-ohm with 8 Sats• Frequency Response: 39Hz-20kHz
± 3dB• Must be used with AS41SYS
Origin Acoustics™ is a distributor of AcoustaScape™. All programs, discounts, and pro-motions for regular Origin Acoustics purchases do not apply to AcoustaScape.
52
Taking entertainment outside is a balance of audible accuracy,
dispersion and power. The Seasons Outdoor Collection utilizes a unique
driver configuration in a triangular cabinet. The 60 Collection models
feature active woofers and tweeters firing forward and dual passive
radiators firing off the back two sides. This means substantial bass and
greater achievable volume levels to fill the yard, deck or pool area with
impressive sound. The collection is available in eight models including
two that deliver both stereo channels from a single enclosure.
Seasons Outdoor CollectionOutdoor Speakers
“Sonically the speakers sound great, producing real and noticeable bass...delivering wonderful clarity with vocals and instruments”
― John Sciacca, Residential Systems Magazine
53
• 4x8” glass fiber woofer• Butyl rubber X-Wave™
surround• 4x8” dual passive radiators
• Aluminum dome tweeter• Adjustable woofer/tweeter
levels• WxHxD: 7” x 13” x 7”
• 4x8” IMG woofer• Butyl rubber X-Wave™
surround• 4x8” dual passive radiators
• Dual aluminum dome tweeters• Adjustable tweeter level• WxHxD: 7” x 13” x 7”
Seasons Outdoor Collection
*Patent Pending
Model:OS66B (Black)Part: OCS6600B
Model:OS66W (White)Part: OCS6600W
Model:OS64DTB (Black)Part: OCS6400DTB
Model:OS64DTW (White)Part: OCS6400DTW
Outdoor Speakers
54
• 5.25” glass fiber woofer• Butyl rubber X-Wave™
surround• Dual passive radiators
• Aluminum dome tweeter• Adjustable woofer/tweeter
levels• WxHxD: 7” x 10½” x 7”
Seasons Outdoor Collection
Model:OS56B (Black)Part: OCS5600B
Model:OS56W (White)Part: OCS5600W
• 4x8” IMG woofer• Butyl rubber X-Wave™
surround• 4x8” dual passive radiators
• Aluminum dome tweeter• Adjustable tweeter level• WxHxD: 7” x 13” x 7”
Model:OS64B (Black)Part: OCS6400B
Model:OS64W (White)Part: OCS6400W
Outdoor Speakers
55
• 5.25” IMG woofer• Butyl rubber X-Wave™
surround• Aluminum dome tweeter
• Adjustable tweeter level• WxHxD: 64�5” x 10½” x 71�10”
• 5.25” IMG woofer• Butyl rubber X-Wave™
surround• Dual aluminum dome tweeters
• Adjustable tweeter level• WxHxD: 7” x 10½” x 7”
Model:OS54DTB (Black)Part: OCS5400DTB
Model:OS54DTW (White)Part: OCS5400DTW
Model:OS54B (Black)Part: OCS5400B
Model:OS54W (White)Part: OCS5400W
*Patent Pending
Seasons Outdoor CollectionOutdoor Speakers
56
Great sound and durability are the hallmarks of Origin amplifiers. When designing a system,
regardless of its size or complexity, amplification is a critical tool that needs to perform all the time,
every time. These amplifiers resoundingly answer the call.
Our Class-D switching type amplifiers have incredible efficiency, above 90%, as higher power is
demanded. This means substantially less heat is produced even though the amplifier is able to
produce substantial power. This also means a reduction in size as smaller heat sinks are required
and the electronic circuitry can be more compact and reside in a smaller chassis.
ElectronicsElectronics
57
ElectronicsAn amplifier should be transparent, it should literally be just wire with gain. At Origin we pride
ourselves in offering no-compromise amplifiers to drive our loudspeakers. Whether you require a
stereo or multi-channel version, our amplifiers feature high-efficiency, Class-D power that is built
to last and will reproduce every nuance of every recording.
• Two Channel, Stereo Amplifier• 150 watts of Class D power per channel• Bridgeable outputs• Signal sensing turn-on• 12-volt trigger• Thermal protection• Short circuit protection• 2U rack mountable• Mounting plates included
Model: A2150Part: AMP02X15000
• 12 independent channels• Global and individual inputs• 50 watts of class-D power per channel• Bridgeable outputs• Signal sensing turn-on• 12-volt trigger• Thermal protection• Short circuit protection• 2U rack mountable• Mounting plates included
Model: A1250Part: AMP12X5000
*Patent Pending
Amplifiers
58
Electronics
• Single channel, subwoofer amplifier• 150 watts of class D power• Adjustable low-pass crossover• Front mounted volume control• Signal sensing auto on/o• Subsonic Filter• Compact 1U design
Model: SUBA150Part: AMPSUB1X150
• Single channel, subwoofer amplifier• 500 watts of class D power• User adjustable presets• Remote Control• 10-band equalization• Front-mounted volume control• Signal sensing auto on/o• Low-pass crossover• Compact 1U design
Model: SUBA500Part: AMPSUB1X500
Subwoofer Amplifiers
59*Patent Pending
Electronics
• Individually switches on/off of up to 4 pairs of speakers• Connect and safely control multiple speaker pairs with
one amplifier.• Automatic impedance protection circuitry engages
without the need for user involvement.• Individual room on/off pushbuttons.• Heavy-duty screw-type connectors, capable of
accepting up to 12 AWG wire, provide positive hookup to input and output wires.
Model: SL4Part: AC4SEL1000
• Individually switches on/off of up to 6 pairs of speakers• Connect and safely control multiple speaker pairs with
one amplifier.• Automatic impedance protection circuitry engages
without the need for user involvement.• Individual room on/off pushbuttons.• Heavy-duty screw-type connectors, capable of
accepting up to 12 AWG wire, provide positive hookup to input and output wires.
Model: SL6Part: AC6SEL1000
• Individually switches on/off of up to 6 pairs of speakers• Allows for individual adjustment of volume levels of up
to 6 pairs of speakers• Connect and safely control multiple speaker pairs with
one amplifier.• Automatic impedance protection circuitry engages
without the need for user involvement.• Individual room on/off pushbuttons.• Heavy-duty screw-type connectors, capable of
accepting up to 12 AWG wire, provide positive hookup to input and output wires.
Model: DS6VCPart: AC6VC10000
Speaker Selectors
60
Electronics
• Connects up to 8 pairs of speakers to a single amplifier
• Standard Phoenix connectors• Compact design
• Each speaker pair connection requires impedance matching volume control
Model: ADC8Part: ADC8000
• Impedance matching Slider volume control
• 70-100 watts
• Includes white, almond and bone faceplates
Model: VS100Part: ACVCO1000
• Impedance matching Rotary Weatherproof outdoor volume control
• 70-100 watts • Only available in gray
Model: OV100Part: ACOVC1000
• Impedance matching Rotary volume control
• 30-50 watts
• Includes white, almond and bone faceplates
Model: VI50Part: ACVC50000
• Impedance matching Rotary volume control
• 70-100 watts
• Includes white, almond and bone faceplates
Model: VI100Part: ACVC100000
• Rotary 70 Volt Volume Control • Includes white, almond and bone faceplates
Model: V70VPart: AC70VC10000
Volume Controls
61*Patent Pending
Origin Acoustics loudspeakers are designed to be mounted in any
room in any home. Typically the stud bay or ceiling construction is
all that is necessary to mount the speakers and provide the proper
acoustic platform. However sometimes the installation may require
specific enclosures to assure proper air volume behind the speaker
or to limit sound transference into an adjoining room. Sometimes
a state or local ordinance may require a metal enclosure in certain
buildings. Origin Metal Sound Enclosures were designed to meet
or exceed One-hour Fire Rating requirements and contain fire, gas,
smoke and heat within the enclosure for up to one hour.
New construction brackets make the final install very fast and effi-
cient. Brackets for all Origin in-wall and in-ceiling speakers are avail-
able. Make sure to confirm the model number correctly correlates
to the brackets you are ordering.
Installation AccessoriesInstallation Accessories
62
Face Plate: 18x17¾” (457x450mm)Box: 10½x14x7½”(265x356x188mm)
• D108• D106• D104
Model: FB10Part: FBXD10000R
Face Plate: 18x17¾” (457x450mm)Box: 10x14x7½” (254x356x188mm)Back box (2x8 construction) for:
• D80 Collection (all)• D60 Collection (all)• ThinFit Collection (all)
Model:FBD82X8Part: FBXC6800R
Face Plate: 18x17¾” (457x450mm)Box: 10x14x5¾” (254x356x146mm)Back box (2x6 construction) for:
• D82• D82DT/SUR• D60 Collection (all)• ThinFit Collection (all)
Model: FBD82X6Part: FBXD68000R
Face Plate: 18x17¾” (457x450mm)Box: 10x14x5¾” (254x356x146mm)Back box for:
• P60• P60DT• P61
Model: FBP6Part: FBPX6010R
Face Plate: 18x18” (457x457mm)Box: 14x14x3½” (356x356x189mm)Back box for:
• LCR38• LCR36
Model: FB10SPart: FBXL1000
Face Plate: 18x17¾” (457x450mm)Box: 10x14x7½” (254x356x188mm)Back box for:
• P80• P80DT
Model: FBP8Part: FBPX8010R
Face Plate: 18x18” (457x457mm)Box: 14x14x3½” (356x356x189mm)Back box for:
• C68• C66• C64• C62
Model: FB12SPart: FBXC1200
Face Plate: 18x18” (457x457mm)Box: 142⁄5x14x3½” (365x356x189mm)Back box for:
• LCR68• LCR66• LCR64
Model: FB15SPart: FBXL1500
Installation AccessoriesSound Enclosures
63*Patent Pending
Bracket for:• D108• D106• D104
Model: BR10Part: BRK1000N
Installation Accessories
Bracket for:• D80 Collection (all)• D60 Collection (all)• ThinFit Collection (all)
Model: BR68Part: BRK800N
Bracket for:• D30 Collection (all)
Model: BR3Part: BRK300N
Bracket for:• P80• P80DT
Model: BRP8Part: BRK810N
Bracket for:• P60• P60DT• P61
Model: BRP6Part: BRK610N
Bracket for:• THTR68• THTR66
Model: BRL30Part: BRKL3000N
Bracket for:• LCR68• LCR66• LCR64
Model: BRL15Part: BRKL1500
Bracket for:• LCR38• LCR36
Model: BRL10Part: BRKL1000N
Bracket for:• C68• C66• C64
Model: BRL12Part: BRKL1200N
New Construction Brackets
64
Installation AccessoriesInstalling the speaker in advance of painting the drywall is a common practice. In order to protect
the speaker’s internal components the reusable paint shields are an excellent investment. They are
made of injection molded plastic with metal on the edges that are secured by the magnets on the
mounting rings. Simply place them over the speaker and whether the paint is sprayed or rolled it will
allow it to flow up to the very edge of the speakers. The shields are then removed and replaced with
the perforated grilles creating a discreet finished appearance.
Paint Shield for:• D108• D106• D104
Model: DPS10Part: MISD10000
Paint Shield for:• P80• P80DT
Model: PPS8Part: MISP8000
Paint Shield for:• D80 Collection (all)• D60 Collection (all)• ThinFit Collection (all)
Model: DPS68Part: MISD6800
Paint Shield for:• P60• P60DT• P61
Model: PPS6Part: MISP6000
Paint Shield for:• C68• C66• C64• C62
Model: CPS6Part: MISC1200
Paint Shield for:• LCR68• LCR66• LCR64
Model: LPS6Part: MISC1500
Paint Shield for:• LCR38• LCR36
Model: LPS3Part: MISC3600
Paint Shields
65
Installation AccessoriesDesigned to give the Origin Acoustics’ Producer and Director Collections that square, precise mod-
ern look, these replacement grilles fit onto and in the exact location of the standard round grilles.
Square Grille for:• D108• D106• D104
Model: SQ10Part: GR10000S
Zip-Clip Ring w/ Rail and Zip-Clip for:
• D80 Collection (all)• D60 Collection (all)
Model: BZ68Part: MISDZ8600
Square Grille for:• D80 Collection (all)• D60 Collection (all)• ThinFit Collection (all)
Model: SQ68Part: GRD68000S
Square Grille for:• P80• P80DT
Model: SQ8PPart: GRP810S
Zip-Clip Ring w/ Rail and Zip-Clip for:
• D100 Collection (all)
Model: BZ10Part: MISDZ1000
Square Grille for:• P60• P60DT• P61
Model: SQ6PPart: GRP610S
*Patent Pending
Grilles
66
The FoundersIn 2012 the three prior CEO’s of SpeakerCraft Ken, Ed and Jeremy started inventing together again.
The three partners have reunited under the all too appropriate moniker, Origin Acoustics. Yes, the
originals are back. They have returned to invent and create the worlds best sounding loudspeakers.
Bringing an aggregate of over 100 years of experience to this effort, they are designing, developing
and innovating new products and technologies that are sure to set the industry standard once again.
He started his career as a custom installer, and then became a successful AV independent retailer where he
learned deficiencies in products and installation practices that drove him to design innovative and timesav-
ing products, and dealer programs that revolutionized the custom installation industry. He and his business
partners founded, developed and grew SpeakerCraft into the industry’s largest architectural speaker manufac-
turer and brand. For over two decades Jeremy has actively contributed in the growth and development of the
residential architectural custom electronics industry. He served on the Board of Directors for CEDIA (Custom
Electronic Design & Installation Assoc.) and regularly contributes articles and lectures to a variety of industry
trade publications and educational events worldwide.
Jeremy Burkhardt CEO
Co-Inventing the in-wall speaker with his high school buddy Ken Humphreys in 1976, Ed has been responsible
for many inventions and patents throughout his exuberant career in the speaker industry. After Ken left the orig-
inal SpeakerCraft in 1989, Ed continued to run the company and eventually hired on a fervent young man by the
name of Jeremy Burkhardt. In 1993, Ed and Jeremy went on to launch the largest custom installation speaker
company the world has ever seen. A true pioneer of the custom installation speaker business, Ed has over 10
active patents on some of the most innovative speaker technologies. When not innovating new products, Ed
loves to be almost anywhere in nature hiking, biking or playing golf and tennis.
Ed Haase COO
Also known as the inventor of the in-wall speaker, Ken started SpeakerCraft after college with his high school
buddy Ed Haase back in 1976. They started out putting speakers into RV’s and manufactured speakers for Bang
& Olufsen, Niles, Polk, Sonance, and more. Ken left SpeakerCraft in 1989 to concentrate on his family up until
the kids didn’t want him around so much. He started his own small retail speaker shop in 1996. Responsible
for many of the cutting edge patents of Origin speakers, nobody has as much experience in innovating archi-
tectural speakers as Ken. When he’s not working around the clock to make sure Origin’s products exceed the
expectations of audiophiles, you can find Ken enjoying himself a nice cold craft brew.
Ken Humphreys CTO
67
Before coming on board at Origin, Susane was with SpeakerCraft for 18 years, and even worked the counter at the original store. She is
the OG of OA! Her family is #1 and she loves spending time in the great outdoors. Interesting fact, Susane owns a 2013 Dodge Charger
that has won three awards from various car shows!
Susane Milliken Customer Service Manager
Jeanne brings over 25 years of accounting experience with 10 years at SpeakerCraft to the Origin team. She either has her toes in the
sand, daiquiri in hand, or is planning new travel adventures and spending time with her grandkids. She enjoys listening to jazz, funk,
and alternative music through Origin’s bumpin’ speakers while reconciling accounts and approving credit applications.
Jeanne Avila Credit Manager
The mastermind behind the fascinating designs found uniquely in Origin Acoustics speakers and Origin Design Services, Tyler dropped
out from the nuclear engineering program at Oregon State University to bring Origin’s vision to life. Outside of his commitments to
work, he is a devout gamer.
Tyler Humphreys Product Design Engineer
A retired musician, mathlete, and makeup artist, Taylor holds a degree in Economics and Chinese and played a key role in developing
technology to support America’s largest single-family home renovation project. He joined Origin Acoustics to serve as a jack of multi-
ple trades. He is an avid guitar player, music collector, distance runner, software developer, and clumsy outdoorsman.
Taylor Nichols Marketing Manager
As a manufacturing guru, Mike has spent 13 years in the audio video industry with 10 of those years in new speaker development and
vendor relations. Mike enjoys spending time with his wife and kids, mountain biking, camping, soccer, fishing and all things outdoors.
He is a serious music enthusiast, collecting and listening to music on his constantly improving Audio/Video system.
Mike Hopkins Product Development Manager
The Origin Family
Relentlessly diligent and crafty in a multitude of areas, Nick spent four years at SpeakerCraft as Director of Marketing & Sales before
obtaining his MBA from UNLV and working as Director of Sales at Soundcast. He has crafted all of our awesome dealer programs to
make us your best partner in the industry. On the weekends, you can find Nick enjoying outdoor activities with his wife and daughters.
Nick Berry Executive Vice President
With a voluminous past, Marc has almost done it all by owning a landscaping company, cross country 4x4 adventures, working for a
carnival, building houses & theaters, and opening a Pro AV rental house. Marc brings over 15 years of audio experience and expertise
to Origin. He is a family man who loves to stay active by mountain biking, being a Spartan athlete, and a handyman of all projects.
Marc Fisher Vice President of Sales
68
Model TF36 TF34 TF64DTMSRP $340/ea $290/ea $230/ea
Model D60 D38MSRP $960/6-pack $370/ea
Model D66 D64 D62 DT/SUR D62 D60 DTMSRP $365/ea $290/ea $375/ea $230/ea $290/ea
Model D84 D82 DT/SUR D82 D80 D68MSRP $490/ea $575/ea $345/ea $1,380/6-pack $625/ea
Model D108 D106 D104 D88 D86MSRP $1,600/ea $1,300/ea $1,035/ea $1,250/ea $725/ea
Innovations
Model P80DT P80 P61 P60DT P60MSRP $285/ea $340/pair $285/pair $170/ea $230/pair
69
Model OS66 OS64DT OS64 OS56 OS54DT OS54MSRP $360/ea $490/ea $300/ea $235/ea $365/ea $200/ea
Model CSUB10N CSUB10NCE CSUB10R DSUB6F3 DSUB6F68MSRP $800/ea $900/ea $1,400/ea $1,000/ea $1,050/ea
Model SUB12 SUB10 SUB8 SUBV10 AS41SYS AS4SATMSRP $1,225/ea $890/ea $615/ea $525/ea $1,700/ea $400/pair
Model LS64 LS44 OSUB12 OSUB10 OSUB8MSRP $575/ea $300/ea $2,550/ea $1,875/ea $1,275/ea
Model LCR38 LCR36 C68 C66 C64 C62MSRP $400/ea $260/ea $625/ea $365/ea $300/ea $230/ea
Model THTR68 THTR66 LCR68 LCR66 LCR64MSRP $1,800/ea $1,400/ea $800/ea $550/ea $375/ea
*Patent Pending
Innovations
Mission Inn Rotunda | 3649 Mission Ave, 1st Floor | Riverside CA 92501 | 844.674.4461 | OriginAcoustics.com