Post on 22-Apr-2020
1
TAKING RURAL INDIA >>FORWARD
TENDER SCHEDULE
Part 2. Price Bid
RENOVATION OF VOF & COMMUNITY HALL AT NABARD PARK, SANTACRUZ (WEST), MUMBAI - 54.
ARCHITECT & CONSULTANTS M/S SANDEEP GOVALKAR DESIGN ASSOCISTES
ARCHITECTS – INTERIOR – LANDSCAPE CONSULTANTS
A3/301-302, SHIVCHHAYA, GILBERT HILL ROAD, ANDHERI WEST, MUMBAI – 400 058.INDIA.
TLFX: - 022 – 2670 3158 CELL: 098211 73563/ 09969699169 E-MAIL – govalkarsgda@gmail.com / sgdesignassociates@gmail.com
Pre-bid meeting: 11:00 AM on 16 October 2018
Last date for submission of Sealed Tender: 14.30 Hrs. (IST) on 24 October 2018
Opening of Technical Bids: 15.00 Hrs. (IST) on 24 October 2018
Chief General Manager, NATIONAL BANK FOR AGRICULTURE AND RURAL DEVELOPMENT,
DEPARTMENT OF PREMISES, SECURITY & PROCUREMENT, GROUND FLOOR, B.K.C BANDRA (E), MUMBAI-400 051.
BILL OF QUANTITIES - Renovation of VOF and CH at NABARD Park, Santacruz(W), Mumbai
Part A - Civil & Furniture
Sr. Particulars Qty. Unit Rate Amount (Rs.)
A DISMANTLING & DEMOLITION
NOTE : CONTRACTOR SHALL VISIT THE SITE FOR INSPECTION BEFORE
QUOTE.
1 Dismantling 150mm thick brick / siporex wall carefully by using chisel to cut & making
good wall edges with removal of existing cement plaster including removal of debris
from site.
L.S.
2 Dismantling marble,granite,kota,marble mosaic, ceramic tile or other flooring & skirting
etc upto bare rcc slab (including cleaning of existing cement morter & concrete/brick bat
coba waterproofing) in a manner which facilitate laying of new flooring without undue
extra expense.the rate shall include removal of debris from site.
L.S.
3 Dismantling marble,granite,kota,marble mosaic, ceramic tile or other tile dado etc.with
the existing backing plaster in a manner which facilitate fixing of new dado without
undue extra expense.the rate shall include removal of debris from site.
L.S.
4 Dismantling kitchen/pantry platform & wash basin counters of marble,granite or other
materials etc.wherever required in a manner which facilitate fixing of new dado without
undue extra expense.the rate shall include removal of debris from site.
L.S.
5 Dismantling existing doors/windows/m.s grillwork, electrical cables / fittings, existing
plumbing fittings, pipes, m.s.jali, ci pipes & aquaguard & insectocutors fittings, mirrors,
towel rods, soap dispensers, all fixed furnitures such as partitions etc. all existing
unused lines for waste water etc. to be removed,the rate shall include all incidental
work, cutting & making good walls & floors etc.complete. as directed by architect/project-
in-charge (contractor shall visit the site for inspection before quote). the rate shall
include removal of debris from site.
L.S.
TOTAL (A)
B CIVIL WORKS
1 Providing and constructing 100mm thick Siporex masonry wall with cement mortar 1:4
(1 Cement : 4 coarse sand) in superstructure at Ground floor including 150 mm thick
RCC lintel beam in M20 on openings as per site requirement with necessary scaffolding,
curing etc. complete as directed.
250.00 SMT
2 Providing & laying half brick masonary work (6") in cement morter 1:4 (1 cement : 4
course sand) inclu.curing all complete in super structure above plinth level as directed.
63.00 SMT
3 Providing and applying cement sand plaster in CM 1:4 (1 cement : 4 sand), about 20
mm thickness in 02 coats with integral waterproofing compound as approved at all levels
in patches on the new surface , curing of new plaster, scaffolding, etc. complete as
directed.
703.00 SMT
4 Brick bat Coba: After carrying out the water proofing plaster, the entire sunken portion
shall then be filled with brick bat coba in cement mortar (1 cement: 3 mortar) mixed with
water proofing compound as per manufacturer's specifications to the required depth with
proper process complete as directed. Care should be taken to observe the levels so as
to accommodate the offset in the floor level, if any.
35 SMT
RATE IN WORD:
RATE IN WORD:
RATE IN WORD:
RATE IN WORD:
RATE IN WORD:
RATE IN WORD:
RATE IN WORD:
RATE IN WORD:
RATE IN WORD:
Page 1 of 14
Sr. Particulars Qty. Unit Rate Amount (Rs.)
5 Supplying and applying 2 coats of membrane waterproofing layer over brick bat coba
concrete surface ,above pcc beading and allround the wall upto 600mm height from the
concrete floor using pidilite make pidifin 2k or equivalent of fosroc make as per
manufacturing specifications before laying floor tiles including repairing of brick bat
coba concrete surface wherever necessary using 1:4:8 mix(1 cement, 4 sand and 8
brick bats) upto 150mm thick with integral water proofing compound of pidilite/fosroc
make including costs of all materials,equipments, labour charges, curing etc. complete
with 5 years guarantee.
47.00 SMT
6 Providing & fixing in position the 20 mm thk. approved coloured granite jamb in two
levels of 300 mm wide for windows in 1:4 cement morter & complete the same with
edge polishing. (basic rate of granite slab =rs.1500 per
sm.) .
190 RMT
7 Providing & laying platform of 675-750 mm depth(clear) and at 700mm to 800 mm
ht(top)above ffl. of approved 20 mm thk granite slab laid on 20 mm thk white marble
support with required cement morter base & 40 mm thk champhered and machine
polished edge facia.it shall be supported on side walls & white marble vertical supports
as shown in the drg.rate shall include the profile cutting and fixing of undercounter
s.s.sink and polishing the exposed edges of granite. 100 mm high granite facia shall be
provided below the chamfered edge.(basic granite rate=rs 1500 per sm) for kitchen /
wash basin area. The granite slab, skirting, facie pattie etc all shall be measured in Sqm
only, no deduction in area for cutting in granite for SS sink. The rate quoted shall be
inclusive of cost towards moulding/edge champharing etc of granite as directed by
Bank's Engineer/Architect. Note: The cost of marble shall be paid seperately under item
No.8.
9 Sqm
8 Providing & fixing in position the 20 mm thk. approved coloured white marble for
vertical/horizontal support of kitchen granite platform and for shelf for inside full ht.
storage with 1:4 cement morter & complete the same with edge polishing. (basic rate of
marble-rs.75 per sft.) .
32 SMT
TOTAL (B)
C FLOOR / SKIRTING/ WALL DADO FINISHES
1 Providing & fixing 600x600 mm vitrified floor tiles in 1:4 cement morter bedding of
average 25 mm thk.in proper line and level.rate shall be inclusive of providing and laying
necessary backing material and grout joint filling bal compound of the same shade of the
tiles. (basic cost of tile: 750/- sq.mt) (Area - All area) (Make: Kajaria / Jhonson)
246 SMT
2 Providing & laying 100mm high skirting /riser with 600mm x 600mm vitrified tile of
approved shade and make in cm 1:4 in proper line & level.the skirting should be flushed
with level of p.o.p.punning on wall with 6 mm groove .rate shall be inclusive of providing
and laying necessary cement / mortar backing material and joint filling compound (bal)
of the same shade of the tiles. (basic cost rs.750/ sq.mt). (Area - Living cum dining area,
suite room, suite bedroom, guest bedroom, staff rest room, doctor room, kitchen, Living
cum dining area, guest bedroom 2, guest bedroom 3, guest bedroom 4) (Make: Kajaria
/ Jhonson)
285 RMT
RATE IN WORD:
RATE IN WORD:
RATE IN WORD:
RATE IN WORD:
RATE IN WORD:
RATE IN WORD:
Page 2 of 14
Sr. Particulars Qty. Unit Rate Amount (Rs.)
3 Providing & fixing antiskid ceramic floor tile(300x300) of approved colour in 1:4 cement
morter bedding of average 25 mm thk.in proper line and level.rate shall be inclusive of
providing and laying necessary backing material inclu.2 coat waterproofing after
exposing the bare slab(1st coat) and above pcc/brickbat coba ( 2nd coat) before fixing
the floor tile and grout joint filling compound of the same shade of the tiles. (basic cost
Rs.500 per smt) (Area - All toilets) (Make: Kajaria / Jhonson)
35 SMT
4 Providing & fixing approved matching floor antiskid ceramic tile skirting (with slope from
4" to 6") of approved colour .Rate shall be inclusive of providing and laying necessary
backing cement / mortar material. The rate includes costs of all materials, equipments,
labour charges, curing rubbing, washing, cleaning the surface etc. Complete as per
instructions of banks engineer / architect. (basic cost rRs. 500 per smt). (Make: Kajaria
/ Jhonson)
72 RMT
5 Providing & fixing 300mm x 600mm of approved shade and quality for ceramic tile dado
as per approved pattern from ffl and in cm 1:4 in proper line & level as directed by the
architect as shown in drawings. Rate shall be inclusive of necessary backing material,
wall plaster waterproofing and joint filling compound(bal) of the same shade of the
ceramic tiles for kitchen, toilet.(basic cost Rs.650/ sq.mt). (Area - Suite room toilet ,
guest bedroom 1 toilet, guest bedroom 2 toilet, guest bedroom 3 toilet, guest bedroom 4
toilet, kitchen) (Make: Kajaria / Jhonson)
147 SMT
6 Highlighter tiles - supplying and fixing digital printed ceramic glazed highlighter tile
300mm x 600mm(300mm) x 10mm in design to walls in required position using cement
and tile adhessive (diamond star of Bal Endura make or equivalent) mixture grout of
average 10mm thick in the ratio 0.5:1 in proper line and level and filling the joints with
roff/balendura make joint filling compound of the same shade of the tiles. The rate
includes costs of all materials, equipments, labour charges, curing, rubbing, washing,
cleaning the site etc. Complete as per instructions of banks engineer / architect. (Basic
cost of highlighter tile rs.75/- per sft) (make:h&r johnson/kajaria/rak). (Area -
Suite room toilet , guest bedroom 1 toilet, guest bedroom 2 toilet, guest bedroom 3
toilet, guest bedroom 4 toilet) (Make: Kajaria / Jhonson)
25 SMT
7 Providing & fixing 600x600 mm of approved shade and quality for vitrified floor tile as
per pattern indicated in drawing and in 1:4 cement morter bedding of average 25 mm
thk.in proper line and level.rate shall be inclusive of providing and laying necessary
backing material and grout joint filling bal compound of the same shade of the tiles.
(basic cost of tile: 750/ sq.mt) (Area - Community hall) (Make: Kajaria / Jhonson)
41 SMT
8 Providing & laying 600x600 mm of approved shade and quality for vitrified 100mm high
skirting /riser as per pattern indicated in drawing of approved shade and make in cm 1:4
in proper line & level.the skirting should be flushed with level of p.o.p.punning on wall
with 6 mm groove .rate shall be inclusive of providing and laying necessary cement /
mortar backing material and joint filling compound (bal) of the same shade of the tiles.
(basic cost rs.750/ sq.mt). (Area - Community hall) (Make: Kajaria / Jhonson)
135 RMT
9 Providing & fixing 600mm x 600mm of approved shade and quality for vitrified tile dado
as per pattern indicated in drawing from ffl and in cm 1:4 in proper line & level as
directed by the architect as shown in drawings. Rate shall be inclusive of necessary
backing material, wall plaster and joint filling compound (bal grout) of the same shade of
the vitrified tiles for community hall. (basic cost rs.750/ sq.mt). (Area - community hall)
(Make: Kajaria / Jhonson)
49 SMT
RATE IN WORD:
RATE IN WORD:
RATE IN WORD:
RATE IN WORD:
RATE IN WORD:
RATE IN WORD:
RATE IN WORD:
Page 3 of 14
Sr. Particulars Qty. Unit Rate Amount (Rs.)
10 Supplying and fixing 18mm thick machine mirror polished granite slab of approved
colour and approved texture in 1:4 cement mortar bedding of average 25 mm thick in
proper line and level including cement slurry with required slope for flooring and filling
the joints with roff/balendura make joint filling compound of the same shade of the
granite. The rate includes costs of all materials, equipments, labour charges, curing,
rubbing, washing, cleaning the surface etc. Complete as per instructions of banks
engineer / architect. Etc. Complete as per design pattern.
(Basic cost of polished granite slab rs.1800/- per smt). (Area - lift lobby, staircase area)
18 SMT
11 Supplying and fixing 18mm thick machine mirror polished granite skirting having
approximate width of 150mm of approved colour and texture using cement and tile
adhessive(diamond star of balendura make or equivalent) mixture grout of average
12mm thick in the ratio 0.5:1 in proper line and level and filling the joints with
roff/balendura make joint filling compound of the same shade of the granite. The edges
of skirting shall be shamphered/moulded and polished. The rate includes costs of all
materials,equipments, labour charges, curing rubbing, washing, cleaning the surface
etc. Complete as per instructions of banks engineer / architect.
(Basic cost of polished granite slab rs.1800/- per smt). (Area - Lift lobby,staircase
areal)
15 RMT
12 Supplying and fixing 18mm thick machine mirror polished granite slab of approved
colour and approved texture in 1:4 cement mortar (1 cement and 4 sand) bedding of
average 25 mm thick in proper line and level including cement slurry with required slope
for wall cladding and filling the joints with roff/bal-endura make polymer joint filling
compound of the same shade of the granite. The rate includes costs of all materials,
equipments, labour charges, curing, rubbing, washing, and cleaning the surface etc.
Complete as per instructions of banks engineer / architect. Etc. Complete. (Basic cost of
polished granite slab rs.1800/- per smt) (Area - Lift lobby,staircase areal)
5 SMT
TOTAL (C)
D PAINTING WORKS
This work includes removing existing paint finishes & filling the dents with approved filler
putty gypsum /or approved crack filler,binder,cleaning and making the surface dust
free,preparing surfaces, applying a sealer or primimng coat as per the manufacturer's
specifications,applying two under coats and one finished coat of paint to achieve the
required finish as per the specifications etc.complete.
1 Providing and applying new 3 coats of luxury acrylic emulsion paints asian/ici/nerolac
make of aproved shade to surface as per manufacturer's specifications & including
staging or scaffolding ,preparing the surface with one coat of primer on walls ,columns &
ceiling etc.final coat should be finish with roller and complete as specified & directed.
877.00 SMT
2 Providing and applying 3 coats of luxury designers paints / washable wallpaper (iokos /
royale play make) of aproved shade to surface as per manufacturer's specifications &
including staging or scaffolding, preparing the surface with one coat of primer on walls &
ceiling etc. as specified & directed. (basic cost rs.800/ sq.mt)
3 SMT
3 Providing and applying 3 coats of luster paint asian/ici/nerolac of aproved shade/make
to surface as per manufacturer's specifications & including staging or scaffolding,
preparing the surface with one coat of primer on ceiling etc. final coat should be finish
with roller and complete as specified & directed.
565.00 SMT
RATE IN WORD:
RATE IN WORD:
RATE IN WORD:
RATE IN WORD:
RATE IN WORD:
Page 4 of 14
Sr. Particulars Qty. Unit Rate Amount (Rs.)
TOTAL(D)
E CEILING & POP PUNNING
1 Providing and fixing gypsum board false ceilings made up of g.i. frames as specified by
manufacturer and 12mm thick gypsum board with suitable suspenders fixed to the
ceiling. ceiling section, perimeter channel, suspenders etc. shall be standard sections
supplied by manufacturer.spacing of intermediate channels shall be at 1200 c/c and
ceiling section at 457 mm c/c. the work includs finishing of joints, necessary offsets,
applying primer, two or more coats of plastic emulsion paints, making cutout for light
fixtures, a. c. grills, diffusers etc., providing of perimeter channels/teak beading etc.
complete.
565 SMT
2 Supplying and fixing suspended 12 mm thick gypsum board band of width not more than
6" for coffered false ceiling and indirect lighting, which includes providing and fixing g.i.
perimeter channels of size 0.55mm thick having one flange of 20mm and another flange
of 30mm & a web of 27mm along the perimeter with ceiling screws fixed to brick wall /
partition with the help of nylon sleeves & screws at 600 mm c/c, then suspending g.i.
intermediate channels of size 45mm x 0.9mm thick with 2 flanges of 15mm each from
the soffit with g.i. and steel expansion fasteners ony, "fasteners" shall be used for ceiling
supports ony. Ceiling section of 0.55mm thickness having knurled verb of 51.5mm and
two flanges of 26mm each with lips of 10.5mm are then fixed to the intermediate
channel with the help of connecting clips and in direction perpendicular to the
intermediate channel at 457 mm c/c. 12.5 tapered edge gypboard (conforming to is-2095-
1982) is then screws fixed to ceiling to ceiling section with 25mm drywait at 230 mm c/c.
Additional supports for ac grill shall be fixed as per instructions and ac plan / section /
layout. *screw fixing is done mechanically with screw driver of drilling machine with
suitable attathcment. The boards are to be jointed and finished so as to have a flush
look, which includes filling and finishing the tapered and square edges of the boards with
jointing compoind, paper tape. The rate includes costs of all materials,equipments,
labour charges, curing, rubbing, cleaning the site etc. Complete as per instructions of
banks engineer / architect.
Note:- For light fittings, grills diffusers and cutouts, speakers, fire detectors etc. Have to
be made with the frame of perimeter channels of size 20 x 27 x 30mm x 0.54 mm thick,
supported suitable as per direction of bank's engineer / architect / electrical & ac
consultants. No additional payment will be made for this work.
120 SMT
3 Providing and applying p.o.p. punning on walls & columns (avg.12 mm thk).the rate shall
include scrapping,levelling and preparing the surface.the rate shall be inclusive of all
types of grooves above the skirting,around the window and door frames as directed.
672 SMT 225 1,51,200.00
4 Gypsum plaster decorative fluted columns with the top of capital & horizontal façade. As
/ details & 3D attached.
a) Fluted column as per design. 20 SMT
b) horizontal rectangular façade with the cornice / capital details etc. 7 SMT
TOTAL(E)
F MISCELLANEOUS ITEMS
1 Providing & laying in place synthetic door mats as per approved sample of size 900mm
x 450mm
15 NOS
RATE IN WORD:
RATE IN WORD:
RATE IN WORD:
RATE IN WORD:
RATE IN WORD:
RATE IN WORD:
RATE IN WORD:
Page 5 of 14
Sr. Particulars Qty. Unit Rate Amount (Rs.)
2 Providing pest control and anti-termite treatment by appointing a specialised agency,
such as PCI as per the specifications mentioned by the bureau of indian standards and
agencies specifications (whichever is higher),for general
civil,plumbing,drainage,timber/carpentry works & gypsum related works, including a 02-
years guarantee under suitable undertaking on stamp paper etc.complete as directed.
(Mode of measurement to be on carpet -area of floor & not the area of surface treated)
355 SMT
3 Providing & fixing of signages for various sizes and shapes using brushed stainless
steel of min.18 guage thk brush steel finish inclu.engraving/etching of letters of reqd
sizes filled with colours as per design & to be fixed with ss screws on wall / doors.
a) Bedroom door /kitchen /toilet/guest room door (Approx size 300 x 150) 18 NOS
4 Grado electronic safe Make: Godrej or approved equivalent. Basic cost of electronic
safe: Rs.7350/-
8 NOS
TOTAL(F)
G CARPENTARY WORKS
NOTE: Refer attached descriptions & specifications of all loose furnitures all in 1.0 mm
thk core laminate finish.
1 Providing and fixing concealed in ceiling pelmet of size 150mm deep x 175mm wide with
vertcals made of 19mm thk commercial ply finished with approved laminate /colour
along the walls with necessary wooden support, t.w.edge putty & hardwares etc.
60 RMT
2 Providing & fixing kitchen shutters/ full ht. storage in 25 mm thk marine grade board
finished in approved shade 1mm thk laminate on exposed surface and internal surface
(white laminate) finished with match polished edge lipping with framework in 50 x 35
mm teakwood sections duly matching french polished & complete as directed by
architect.
3 SMT
3 Providing and making sofa of overall sizes as mentioned in the drg.with back and
armrests.the sofa will consist of c.p.teakwood frame.seat base provided with flat springs
and fully covered with cloth from bottom as well as seattop & backrest.the seat and back
frame work will be faced with 100mm thk.approved high density polyurethenefoam
internally and 4mm thk ply from outer side and covered with approved upholstery .a
25mm thk wooden member as shown in the drg.shall be provided and polished in
melamine.rates inclusive of all accessories and scotch guard treatment for upholstery.
(basic cost of fabric rs.600/ rmt)
a) Three seater sofa (1930mm wide x 740mm depth x 790mm height) 2 NOS
b) Two seater sofa (1330mm wide x 740mm depth x 790mm height) 1 NOS
4 DOUBLE BEDS FOR SERVENT (SIZE - 5'-0" X 6'-7" X 1'-6"HT) WITH 4"
MATTRESS/HEADBOARD WITH 12 MM THK BWR PLY BACKING
2 NOS
DOUBLE BEDS WITH HEADBOARD WITH 12MM THK PLY BACKING & 1MM THK
LAMINATE FINISH WITH 2 "X 1" T.W.EDGE FRAME FINISHED WITH MATT
MELAMINE POLISH AS PER DETAIL & SPECIFICATIONS ATTACHED. AS PER
APPROVED DESIGN OF ARCHITECT.
5 Single bed for servent (size - 3'-0" x 6'-7" x 1'-6"ht) with 4" mattress/headboard
with 12 mm thk bwr ply backing
1 NOS
SINGLE BED WITH HEADBOARD WITH 12MM THK PLY BACKING & 1MM THK
LAMINATE FINISH WITH 2 "X 1" T.W.EDGE FRAME FINISHED WITH MATT
MELAMINE POLISH AS PER DETAIL & SPECIFICATIONS ATTACHED. AS PER
APPROVED DESIGN OF ARCHITECT.
RATE IN WORD:
RATE IN WORD:
RATE IN WORD:
RATE IN WORD:
RATE IN WORD:
RATE IN WORD:
RATE IN WORD:
RATE IN WORD:
RATE IN WORD:
Page 6 of 14
Sr. Particulars Qty. Unit Rate Amount (Rs.)
6 Double beds (size - 5'-6" x 6'-0" x 1'-6"ht) with 5" mattress/headboard with 12mm
thk bwr ply backing
8 NOS
DOUBLE BEDS WITH H HEADBOARD WITH 12MM THK PLY BACKING & 1MM THK
LAMINATE FINISH WITH 2 "X 1" T.W.EDGE FRAME FINISHED WITH MATT
MELAMINE POLISH AS PER DETAIL,DESIGN & SPECIFICATIONS ATTACHED. AS
PER APPROVED DESIGN OF ARCHITECT.
7 BED SIDE TABLE (Approx 1'-6" x 1'-6") 16 NOS
PROVIDING AND FIXING BED SIDE TABLE, TABLE MADE OUT OF 18MM THK PLY
WITH 1 MM THK APPROVED LAMINATE FINISH TOP AND VERTICAL IF
NECESSARY. THE SIDE TABLE IS TO BE 1 1/2"THK WITH PROPER TEAK WOOD
EDGE MOULDING WITH MATT MELAMINE POLISH MATCHING TO LAMINATE.
THE TABLE TO HAVE A DRAWER OF APPROX 4"IN HEIGHT. WITH PROPER
TELESCOPIC DRAWER CHANELS,DRAWER LOCK AND OTHER HARDWARE
FITTINGS. ALL EXPOSED SURFACE TO HAVE LAMINATE FINISH AND POLISH
MATCHING TO THE LAMINATE AND ALL INSIDE SURFACES TO HAVE 0.8 MM
THK LAMINATEAS PER THE APPROVAL OF THE ARCHITECT.
8 centre table (size - 3'-0" x 2'-0") 1 NOS
CENTRE TABLE IN WOOD FINISH LEGS WITH MATT MELAMINE POLISH AND 10
MM THK GLASS TOP WITH BEVELED EDGE.AS PER DETAILS & DESIGN GIVEN
BY ARCHITECT.
9 Coffee table (size - dia 2'-0") 1 NOS
CIRCULAR DINING TABLE WITH 18 MM THK APPROVED CORE LAMINATE
FINISH TABLE TOP, BOTTOM & TOP FRAME IN TEAK WOOD, AS PER DETAIL
DRAWING. AS PER INSTRUCTIONS OF ARCHITECT.
10 Dining table (six seaters) (size - 6'-0" x 3'-0") 1 NOS
PROVIDING & ARANGING IN POSITION DINING TABLE IS MADE OUT OF 25 MM
THK MARINE PLY FOR TOP,12 MM FOR BOTTOM,SIDES, BACK. ALL EXPOSED
SURFACES TO BE FINISHED WITH COMBINATION OF 1.5MM THK COMBINATION
OF GROUP MATCHING DECORATIVE LAMINATE OF APPROVED TYPE.
EXPOSED WOODEN SURFACES WITH MELAMINE FINISH & ALL INTERNAL
SURFACES OF THE PLY FINISHED WITH 2 COATS OF FRENCH POLISH. ITEM TO
BE COMPLETED AS PER DRG,SPECIFICATIONS & SITE DIRECTIONS.ITEM TO
INCLUDE ALL TYPES OF HARDWARES, SCREWS,HINGES,LOCKS,SS
HANDLES,TOWER BOLTS,BALL CATCHES,WOODEN LIPPING, BEDDING, INLAY
PATTI & MOULDING ETC.
11 Dining chairs 6 NOS
ARMED CHAIR WITH CUSION SEAT AND BACK MADE OF TEAK WOOD WITH
APPROVD FABRIC AND FRAME IN WELL SEASONED C.P TEAKWOOD FRAME OF
SIZE 2"X1.5" WITH 3 COATS OF MELAMINE POLISH AS PER DETAIL AND
DESIGN.
12 coffee table chair 2 NOS
AS PER APPROVED DESIGN & INSTRUCTIONS OF ARCHITECT.
13 Sofa side corner table with t.wood and melamine polish . 4 NOS
SIDE TABLE /CORNER TABLE APPROVED GRANITE TOP MADE OUT OF TEAK
WOOD, 18 MM THK MARIN PLY WITH 1 MM THK CORE LAMINATE FINISH OF
APPROVED SHADE & MAKE. AS PER APPROVED DESIGN & INSTRUCTIONS OF
ARCHITECT.
RATE IN WORD:
RATE IN WORD:
RATE IN WORD:
RATE IN WORD:
RATE IN WORD:
RATE IN WORD:
RATE IN WORD:
RATE IN WORD:
Page 7 of 14
Sr. Particulars Qty. Unit Rate Amount (Rs.)
14 PROVIDING & FIXING IN POSITION 35 MM THK SOLID CORE APPROVED BRAND
FLUSH DOOR FINISHED WITH 4 MM THK. APPROVED SF LAMINATE FROM
BOTHSIDE INCLUDING 4"WIDE JAMB LINING FOR EXISTING DOOR FRAMES
WITH 12 MM THK BWR PLY FINISHED WITH THE APPROVED SF LAMINATE,
MELAMINE POLISHED EDGE BEADING, AND INCLUSIVE OF HEAVY DUTY BRASS
HINGES OF 100 X 25MM ALONG WITH APPROVED MAKE CYLINDRICAL LOCK
/MORTISE LOCK FOR MAIN DOOR AND T.W.BIDING WHEREVER REQUIRED FOR
THE INTERNAL DOOR SHUTTER AND COMPLETE ALL AS PER DRG.,DETAILS
AND AS DIRECTED. COMPLETE.
a) Door (3'-0" X 7'-0") 16 NOS
b) Door (3'-6" X 7'-0") 2 NOS
c) Door (4'-0" X 7'-0") 1 NOS
d) Toilet door (2'-6" x 7'-0") 11 NOS
15 STUDY CUM DRESSING TABLE
PROVIDING & FIXING IN POSITION STUDY CUM DRESSING TABLE IS MADE OUT
OF 19 MM THK MIRROR POLISH GRANITE FOR TOP,BOTTOM,SIDES, BACK & 12
MM THK COMM.PLY FOR SHELF. ALL EXPOSED SURFACES TO BE FINISHED
WITH COMBINATION OF 1MM THK LAMINATE & ALL INTERNAL SURFACES OF
THE PLY FINISHED WITH 2 COATS OF FRENCH POLISH. ITEM TO BE
COMPLETED AS PER DRG & SITE DIRECTIONS.ITEM TO INCLUDE ALL TYPES
OF HARDWARES, SCREWS,HINGES,LOCKS,SS HANDLES,TOWER BOLTS,BALL
CATCHES,WOODEN LIPPING, BEDDING, INLAY PATTI & MOULDING ETC. ALL
EXTERNAL EXPOSED WOODWORK TO BE FINISHED IN MELAMINE POLISH.ALL
DRAWERS TO HAVE TELESCOPIC SLIDING DRAWER FITTINGS. DRAWER UNIT
SHALL BE WITH 12 MM THK COMM.PLY FOR FRONT & SIDES AND 6 MM THK
COMM.PLY FOR BACK & BOTTOM.THIS ALSO INCLUDES 6MM THK.MIRROR OF
APPROVED MAKE INCLU.9MM THK MARINE PLY BACKING WITH NEESSARY
WOODEN FRAME WORK ON WALL TO GET THE SURFACE IN PLUMB,LINE &
LEVEL.THE EXPOSED WOODEN MEMBERS TO BE MELAMINE POLISH ETC.ALL
COMPLETE.
a) 2'-6" X 2'-0" X 2'-6"HT 3 NOS
b) 3'-2" X 2'-0" X 2'-6"HT 3 NOS
c) 2'-3" X 2'-0" X 2'-6"HT 3 NOS
16 STUDY TABLE CHAIR 9 NOS
MEDIUM BACK CHAIR / REVOLVING / GAS HEIGHT ADJUSTMENT /PERMANENT
CONTACT MECHANISM / PP FIXED ARMS / NYLON BASE WITH TWIN WHEEL
CASTORS.UPHOLSTERY - FABRIC (BASIC COST RS.250/-) 37" HT OF THE
CHAIR, SEAT SIZE 19" X 19" BACK SIZE 19"X 17". ERGONOMICALLY DESIGN.
17 Mirror frames in wash basin areas :providing & fixing in position 6 mm thk 25mm
bevelled edge clear mirror fixed with 9 mm thk marine ply backing with s.s. studs and
complete all as per drg., details and as directed.
7 SMT
18 WARDROBE
RATE IN WORD:
RATE IN WORD:
RATE IN WORD:
RATE IN WORD:
RATE IN WORD:
RATE IN WORD:
RATE IN WORD:
RATE IN WORD:
RATE IN WORD:
Page 8 of 14
Sr. Particulars Qty. Unit Rate Amount (Rs.)
Providing & fixing 550mm deep 1800mm ht.wardrobe unit as per drg.and details.the
storage unit should be made out of 18mm thk. marine ply for top, sides and base, 6mm
thk.marine ply back, 25mm thk block board (marine) shutters with autoclosing hinges
and t.w.lipping matching with approved laminate on all the edges. All external surfaces
to be finished in 1mm thk laminate (suede finish) of approved make division of shutters
(aprox.450 mm) shall be made equally according to the length of the storage, and
complete. Rates shall be inclusive of all necessary approved fittings like auto closing
hinges, locks,concealed handles, telescopic drawer chanels, tower bolts and any
miscellaneous hardware items as per engineer-incharge / architect's instructions.
25 SMT
Note :- (All loose furniture will have 1mm thk core laminate on top & side beeding &
other surface will be use 1mm thk SF laminate finish).
19 LUGGAGE RACK (APPROX. 3'-0" X 2'-0") 5 SMT
P/F IN POSITION LUGGAGE RACK IS MADE OUT OF 19 MM THK COMMERCIAL
PLY FOR TOP,BOTTOM,SIDES, BACK. ALL EXPOSED SURFACES TO BE
FINISHED WITH COMBINATION OF 1MM THK LAMINATE & ALL INTERNAL
SURFACES OF THE PLY FINISHED WITH 2 COATS OF FRENCH POLISH. ITEM TO
BE COMPLETED AS PER DRG & SITE DIRECTIONS.ITEM TO INCLUDE ALL
TYPES OF HARDWARES, SCREWS, SS HANDLES,TOWER BOLTS,BALL
CATCHES, WOODEN LIPPING,BEDDING,INLAY PATTI & MOULDING ETC. (REFER
DETAIL DRAWINGS)
20 FULL HT. STORAGE 20 SMT
PROVIDING AND FIXING 16" DEEP STORAGE UNITS OF DIFFERENT HEIGHTS
OUT OF 19 MM TH. MARINE PLY SIDES AND SHELVES AND SHUTTERS AND 6 M
TH. MARINE PLY BACKING AS PER DETAIL DRAWING. ALL SHUTTERS TO BE
FIXED WITH 3 NO. 4" X 3/4" BRASS HINGES, BRUSH FINISHED S. S. HANDLES
AND LOCKING ARRANGEMENT. ALL EXPOSED & INSIDE SURFACES TO BE
FINISHED WITH 1.0 MM THK FINISH APPROVED LAMINATE.
21 PANELLING ON WALLS / COLUMNS WITH LAMINATE FINISH 20 SMT
PROVIDING NEW PANELLING, PROVIDING AND FIXING 1MM THK APPROVED
LAMINATE FINISH PANELLING FOR WALLS, COLUMNS ETC. MADE OUT OF 2" X
1" C.P.T. WOOD FRAME WORK AT EVERY 1'-6" C/C (HORIZONTAL & VERTICAL)
COVERED WITH 6MM THICK MARINE PLY ALONG WITH 4" WIDE SKIRTING TO
MATCH PARTITION. SKIRTING FINISH WITH 1.0 MM THK LAMINATE. THE TOP
EDGE TO BE FINISHED WITH 12MM THK T.W. BEADING WITH 3 COATS OF
SMOOTH SILK MELAMINE POLISH. COMPLETE. ALL THE EXPOSED SURFACES
OF THE PANELLING SHALL BE FINISH WITH APPROVED MAKE/COLOR 1.00MM
THICK LAMINATE WITH VERTICAL / HORIZONTAL GRAINS ETC. COMPLETE AS
PER DESIGN & DIRECTED BY ARCHITECT.
22 TYPICAL TV UNIT PANELLING APPROX (1.30 X 1.30) 10 NOS
PROVIDING AND FIXING TV UNIT PANELLING WITH 3 " DEPTH ON WALL
LAMINATE FINISH PANELLING FOR WALLS, COLOUMN, MADE OUT OF 2" X 1"
C.P.T. WOOD FRAME WORK AT EVERY 1-6" C/C (HORIZONTAL & VERTICAL)
COVERRED WITH 6MM THICK MARINE PLY ALONG WITH 1.3 METER HT. OR
MORE, CUTOUT IN PANELLING AS PER TV SIZE FOR SHUTTER ON 3 NOS.
4"X3/4" BRASS HINGES, 12 MM THK BACKING ON WALL, COMPLETE AS PER
DESIGN & DIRECTED BY ARCHITECT.
23 ALUMINIUM SLIDING GLAZED WINDOW 50 SMT
RATE IN WORD:
RATE IN WORD:
RATE IN WORD:
RATE IN WORD:
RATE IN WORD:
RATE IN WORD:
Page 9 of 14
Sr. Particulars Qty. Unit Rate Amount (Rs.)
REMOVING OLD EXISTING AND PROVIDING DOUBLE GLAZED HERMETICALLY
SEALED GLAZING IN ALUMINIUM WINDOWS, VENTILATORS , & PARTITION ETC.
WITH 6MM THK CLEAR FLOAT GLASS BOTH SIDE, HAVING 12MM AIR GAP ,
INCLUDING PROVIDING EPDM GASKET, PERFORATED ALUMINIUM SPACERS,
DESSICANTS, SEALANT (BOTH PRIMARY& SECONDARY SEALANT) ETC.AS PER
SPECIFICATIONS, DRAWINGS AND DIRECTION OF ENGINEER - IN CHARGE
COMPLETE.
24 LOUVER WINDOW 6 SMT
SUPPLYING AND FIXING 16 GUAGE ALUMINIUM POWDER COATED (
MINIMUM 50MICRON POWDER COATING) VENTILLATOR FRAME OF SIZE
50MMX25MM WITH ADJUSTABLE ALUMINIUM 100 MM SIZE LOUVERS AND
PROVIDED WITH WITH 100MM WIDE AND 5MM THICK PINNED GLASS.
EXTERNAL FACE OF VENTILLATOR SHALL BE COVERED WITH GI RAT MESH
FIXED IN 25MMX12 MM, 16GUAGE ALUMNIUM POWDER COATED FRAME
WITH F CHANNEL AND TO BE FIXED ON THE WALL. THE RATE INCLUDING
COSTS OF ALL MATERIALS INCLUDING NON CORROSSIVE FASTNERS, LABOUR
CHARGES, SCAFFOLDING, CLEANING ETC. COMPLETE
25 PRE-FABRICATED FACTORY MADE MODULAR KITCHEN UNITS BELOW
PROPOSED KITCHEN PLATFORM/COUNTER ( APPROXIMATELY 750 MM IN
HEIGHT AND 700 MM IN DEPTH) AS PER THE FOLLOWING SPECIFICATIONS
AND ENCLOSED SKETCH.
THE FRAME WORK OF THE CABINETS INCLUDING DRAWER FASCIA/
SIDES/BOTTOM, SHELVES ETC. SHALL BE MADE OUT OF 16 MM THICK
MARINE PLYWOOD ( WESTERN INDIA PLYWOOD, OR APPROVED EQUIVALENT
MAKE).
SHUTTERS SHALL BE MADE OUT OF 16 MM THICK MARINE PLYWOOD (
WESTERN INDIA PLYWOOD, OR APPROVED EQUIVALENT MAKE). EACH
SHUTTER SHALL BE FIXED TO THE FRAMEWORK USING TWO NUMBERS OF
BEST QUALITY EURO TYPE SLIP/AUTO HINGES (EBCO, HETTICH, HAFELE OR
APPROVED EQUIVALENT MAKE) AND PROVIDED WITH ONE APPROVED
QUALITY AND PROFILE BRUSH FINISHED STAINLESS STEEL (SS) HANDLE OF
GRADE 304 (MINIMUM 150 MM LONG)
EACH DRAWER FASCIA SHALL BE MADE OUT OF 16 MM THICK MARINE
PLYWOOD (WESTERN INDIA PLYWOOD, OR APPROVED EQUIVALENT MAKE)
AND APPROVED QUALITY AND MAKE SS 304 GRADE BASKETS / ACCESSORIES
(HETTICH, EBCO, HAFELE OR APPROVED EQUIVALENT MAKE) SHALL BE
MOUNTED ON APPROVED QUALITY, HIGH PRECISION TELESCOPIC
CHANNELS/SLIDES (EBCO, HETTICH, HAFELE OR APPROVED EQUIVALENT
MAKE) TO BE DESIGNED AS PER DRAWER SIZE AND TO MEET THE WEIGHT
REQUIREMENT WITH MINIMUM LENGTH OF 500 MM TO ENSURE SMOOTH
MOVEMENTS OF DRAWER WITH /WITHOUT CONTENT WEIGHTS AND
PROVIDED WITH APPROVED QUALITY 150MM SIZE SS HANDLES OF GRADE
304. THE TELESCOPIC CHANNEL RAILS MAY BE PROVIDED
AS PER SPECIFICATIONS. IN EACH KITCHEN THERE SHOULD BE A MINIMUM
OF 1NO. PERFORATED CUTLERY BASKET(4” SIZE), 1 NO. CUP & SAUCER
4 SMT
RATE IN WORD:
RATE IN WORD:
Page 10 of 14
Sr. Particulars Qty. Unit Rate Amount (Rs.)
26 SUPPLYING OF OVER HEAD KITCHEN CABINET UNITS OF 600 MM & 300MM IN
HIGHT AND 300 MM IN DEPTH AS PER THE FOLLOWING SPECIFICATIONS AND
ENCLOSED SKETCH. THE FRAME WORK OR CARCASS OF THE CABINETS, ITS
SIDES/BOTTOM, SHELVES ETC. SHALL BE MADE OUT OF 16 MM THICK
MARINE PLYWOOD APPROVED EQUIVALENT MAKE). GLAZED SHUTTERS OF
CABINETS AS PER THE DRAWING SHALL BE MADE OUT OF 16 MM THICK
MARINE PLYWOOD (APPROVED EQUIVALENT MAKE). EACH SHUTTER SHALL
BE FIXED TO THE FRAMEWORK /CARCASS BY USING TWO NUMBERS OF BEST
QUALITY EURO TYPE SLIP/AUTO HINGES (EBCO, HETTICH, HAFELE OR
APPROVED EQUIVALENT MAKE) AND PROVIDED WITH AN APPROVED
QUALITY AND PROFILE BRUSH FINISHED SS HANDLE (MINIMUM 150 MM
LONG) OF 304 GRADE. THE GLAZED SHUTTERS SHALL HAVE 5MM THICK
FLOAT GLASS FITTED IN 16 MM THICK MARINE PLYWOOD FRAME ALROUND
WITH NECESSARY CLEATS, CLIPS AND MAGNETIC CATCHERS. THE WILL BE
ONE GLASS SHELF OF 10 MM THICK EDGE POLISHED FLOAT GLASS FOR
PVC LIPPING FOR SHUTTERS SHALL BE 2MM THICK, THICKNESS OF EDGE
LIPPING OF CARCASS/ PLYWOOD PARTITION SHOULD BE 0.8MM AND
THICKNESS OF FOUR EDGE LIPPING AROUND THE REBATE OF GLASS SHUTTER
SHALL BE 0.6MM. THE LIPPINGS/BANDING SHALL MATCH WITH THE
APPROVED QUALITY SS PINS AND SHALL BE ADJUSTABLE FOR VARIOUS
FITTED TO THE WALL WITH PVC CAPPED 2MM THICK CONCEALED MS
HANGING BRACKETS EACH HAVING WIDTH OF 15MM AND DEPTH OF 50MM
@ 2 BRACKETS FOR EACH CABINET WHICH IS FIXED ON WALL WITH
THE UNITS SHALL HAVE MACHINE PRESSED LAMINATION HAVING THICKNESS
5 Sqm
TOTAL(G)
H FURNISHING & MISCELLANEOUS WORKS
1 BEAUTIFULLY STITCHED WINDOW AMERICAN PLEATED CURTAINS WITH
BLACK OUT LINING AND HEAVY DUTY APPROVED ALUMINUM CHANNELS.
(BASIC RATE OF CURTAIN= 850.00RMT), COMPLETE AS PER ARCHITECTS
DIRECTION (APPROX HT. 8'-0")
60 RMT
2 ARTEFACTS & ARTWORKS/PAINTING ETC AS APPROVED BY BANK'S
ENGINEER/ARCHITECT(BASIC PRICE RS. 1500/-).
5 NOS
3BEAUTIFULLY STITCHED WINDOW POLYSTER SHEER CURTAINS WITH
APPROVED HEAVY DUTY ALUMINUM CHANNELS. (BASIC RATE OF CURTAIN=
225.00RMT) COMPLETE AS PER ARCHITECTS DIRECTION (APPROX HT. 8'-0")
46 RMT
TOTAL(H)
I SANITARY FITTINGS & FIXTURES (CONCEALED PLUMBING WORKS) WITH
NECESSARY MATERIALS INCLU.CONNECTING THE EXISTING WATER SUPPLY
LINES & DRAINAGE LINES. COMPLETE. (JAQUAR MAKE - CONTINENTAL
RANGE)
1 REMOVAL OF EXISTING AND PROVIDING & FIXING OF NEW OVERHEAD
SHOWER OF JAQUAR MAKE (MODEL NO. OHS-1813 .BASIC
COST:RS.4100)WITH S.L. CONCEALED DIVERTER FOR BATH/SHOWER (MODEL
NO. CON-421. BASIC COST RS.2350 & BATHTUB SPOUT WITH FLANGE
(MODEL NO.SPJ-CHR-35429. BASIC COST.RS.1240.00) INCLU. LABOUR WITH
ALL REQUIRED PLUMBING MATERIALS, CUTTING, GROOVING, MAKING THE
GOOD WALLS & FLOOR ETC. COMPLETE.
11 NOS
2REMOVAL OF EXISTING AND PROVIDING AND FIXING OF NEW VITROUS
CHINAWARE EWC-WALL HUNG WITH C.I CHAIR BRACKET AND COVER
COMPLETE AS APPROVED MAKE (MODEL NO.CNS-WHT-959NS BASIC
COST.RS.-6460) (GLAZED EARTHWARE WATER CLOSET PAN) OF ANY ISI MAKE
OR EQUIVALENT OF COLOUR AND DESIGN AS APPROVED BY THE ARCHITECT.
11 NOS
RATE IN WORD:
RATE IN WORD:
RATE IN WORD:
RATE IN WORD:
RATE IN WORD:
Page 11 of 14
Sr. Particulars Qty. Unit Rate Amount (Rs.)
3SUPPLYING AND FIXING WALL MOUNTED CISTERN WITH SLIM BODY
INSTALLATION KIT WITH CONTROL PLATE WHITE/CHROME FINISH OF
APPROVED MAKE AND AS APPROVED BY BANKS ENGINEER/ARCHITECT. THE
RATE INCLUDES COSTS OF ALL MATERIALS INCLUDING NON-CORROSSIVE
FASTNERS,EQUIPMENTS, LABOUR CH ARGES, RUBBING, CLEANING THE SITE
ETC. COMPLETE AS PER INSTRUCTIONS OF BANKS ENGINEER / ARCHITECT.
(BASIC COST = RS 1800/-PER NO.) MAKE: JAQUAR/equivalent)
11 NOS
4 PROVIDING AND FIXING OF NEW APPROXIMATED SIZE 410X410X150MM
GLAZED VITEROUS EARTHWARE HAND WASH BASIN (COUNTER- TOP
MOUNTED) OF APPROVED MAKE SUCH AS
PARRYWARE/EURO/NEYCER/HINDWARE/JAQUAR OF WHITE COLOUR,
ATTACHED JAQUAR ANGLE COCK, FIXING AND SUPPLY OF CI BRACKET,
RUBBER PLUGS, THICK CP CHAIN, CP INLET CONNECTION INCLUDING 32MM
CP EUROPEAN TYPE BOTLE TRAP OF JAQUAR WITH 300MM WALL
CONNECTION PIPE OF JAQUAR MAKE INCLUDINGCP WASTE COUPLING,
CUTTING FLOORS, DRILLING HOLES IN THE WALL AND MAKING GOOD THE
DAMAGES ETC.. COMPLETE AS DIRECTED BY THE ARCHITECT / BANK
ENGINEER. (BASIC COST OF BASIN = RS.2,390/-PC), (MODEL NO :- CNS-WHT-
905) MAKE: JAQUAR/equivalent
18 NOS
5 PROVIDING AND FIXING OF NEW 15MM DIA CP ANGLE COCK OF JAQUAR
WITH CP WALL FLANGE OF JAQUAR WITH 15 MM CP CONNECTOR PIPES FOR
WASH BASINS / PVC CISTERN FOR WC/ KITCHEN SINK WITH MATERIAL AND
LABOUR ECT. COMPLETE.(BASIC COST: RS.1400/-) MAKE:
JAQUAR/equivalent
12 NOS
6 P/F JAQUAR JET SPRAY IN TOILET. (MODEL NO :- ALD 579) (BASIC COST:
RS.1175/-)MAKE: JAQUAR/equivalent
11 NOS
7 REMOVAL OF EXISTING AND PROVIDING & FIXING OF 15MM DIA CP BIB COCK
WITH CP WALL FLANGE OF JAQUAR WITH 15MM CP CONNECTOR PIPES FOR
ABLUTION TAP WITH MATERIAL AND LABOUR ETC.COMPLETE. (BASIC COST:
RS.1900/-).MAKE: JAQUAR/equivalent
11 NOS
9PROVIDING AND FIXING OF SINGLE LEVER EXTENDED BASIN MIXER (HEIGHT-
97MM)OF JAQUAR WITH WITHOUT POPUP WASTE SYSTEM WITH 450MM
LONG BRAIDED HOSESCP CONNECTOR PIPES FOR ABLUTION TAP WITH
MATERIAL AND LABOUR ETC..COMPLETE FOR WASH BASIN. (MODEL NO :-
KUB -CHR-35023FB))(BASIC COST: RS.4028/-)
18 NOS
10 PROVIDING AND FIXING CP STAINLESS GRATING WITH COCKROACH TRAP FOR
NAHANI TRAP ROUND OR SQUARE , 100 MM CI NAHANI TRAP HEAVY SOIL
QUALITY INCLU.FRAME WITH FIXING OF TILES CEMENT FINISHING OF TRAP
,MATERIAL & LABOUR ETC. COMPLETE.
13 NOS
11 SUPPLYING AND FIXING NEW CP CONCEALED STOP COCK OF JAQUAR MAKE
(MODEL NO. 069 KN).THE RATE INCLUDES COSTS OF ALL MATERIALS
INCLUDING NON-CORROSIVE FASTNERS, EQUIPMENTS, LABOUR CHARGES,
CURING. CLEANING ETC. COMPLETE AS PER INSTRUCTIONS OF BANKS
ENGINEER / ARCHITECT. COMPLETE. (CON-503KN) (BASIC COST: - RS.650/-
PER NO.)MAKE: JAQUAR/equivalent
11 NOS
12PROVIDING & FIXING OF NEW CP FLUSH VALVE OF JAQUAR WITH CP WALL
FLANGE OF JAQUAR WITH 15MM CP CONNECTOR PIPES FOR WATER CLOSET
WITH MATERIAL AND LABOUR ETC.COMPLETE. (BASIC COST: RS.2900/-)
11 NOS
13P/F FLOOR MATCHING COLOUR S.S GRATING / JALLI HEAVY QUALITY 100 MM
DIA NAHANI TRAP WITH COVER OF APPROVED MAKE.:(BASIC COST: RS.125/-)
13 NOS
RATE IN WORD:
RATE IN WORD:
RATE IN WORD:
RATE IN WORD:
RATE IN WORD:
RATE IN WORD:
RATE IN WORD:
RATE IN WORD:
RATE IN WORD:
RATE IN WORD:
Page 12 of 14
Sr. Particulars Qty. Unit Rate Amount (Rs.)
14 SOAP DISPENSER (500 ML.) OF JAQUAR MAKE. (BASIC COST: RS.325/-) 13 NOS
15 PROVIDING AND FIXING CI ADAPTERS WITH MATERIAL & LABOUR ETC.
COMPLETE.
a) 75MM DIA 11 NOS
b) 100MM DIA 11 NOS
16 PROVIDING & FIXING CP TOWEL RING 200 MM DIA OF JAQUAR WITH
MATERIAL & LABOUR ETC.COMPLETE. (MAKE: JAQUAR) (MODEL NO: AQN-
7721). (BASIC COST: RS.750/-)
15 NOS
17 PROVIDING AND FIXING CP TOILET ROLL HOLDER WITH FLAP OF JAQUAR
WITH MATERIAL AND LABOUR ETC. COMPLETE. (BASIC COST: RS.900/-)
(MAKE: JAQUAR) (MODEL NO: ACP-1153N)
11 NOS
18P/F JAQUAR MAKE TOWEL RACK 600MM LONG WITH LOWER HANGERS
COMPLETE. (MODEL NO: ACN-1181N) (BASIC COST: RS.2150)
11 NOS
19 P/F JAQUAR SOAP DISH HOLDER (BASIC COST: RS.525/-) (MODEL NO: ACN-
1131N)
11 NOS
20 P/F extended jaquar make kitchen tap etc. Complete. (For kitchen sinks)
(model no: CQT- 23347) (BASIC COST: RS.1050/-)
2 NOS
21 P/F Anti scratch range by Nirali (Elegance unique, size: 915mm x510mm, bowl
depth: 190mm, basic cost: rs.10500/-)
2 NOS
22 P/F shower curtain with s.s rode 25 mm dia with wall holders (size: 5' x 6') as
approved by architect.
11 NOS
23waste bin with lid as approved by architect. (s.s finish) (Basic cost: Rs. 1500/- )
12 NOS
24 Supplying and fixing CP Robe hook two way in toilets (jaquar- continental,
modelno: 1161N). The rate includes costs of all materials including non-
corrosive fastners, equipments, labour charges, curing. Cleaning etc. Complete
as per instructions of banks engineer / architect. Complete. (Basic cost:
Rs.425/- per no.)
11 NOS
25 P/F master cock (MAKE: JAQUAR) 1 NOS
26 single towel rail (MAKE: JAQUAR) (model no: ACN-1111NM) (BASIC
COST: RS.975/-)
11 NOS
TOTAL(I)
J EXTERNAL & INTERNAL WATER SUPPLY
1 Providing materials & labour for fixing concealed in the wall including making grooves by
machine following sizes of cpvc heavy aproved make ,screwed and threaded joints with
supply of necessary gi specials of aproved "r"brand etc. specials like sockets, unions,
elbow, bends, reducers, plugs, tees etc.inclu. supply of clamps and enamel paints,hemp
yarn for water tight joints inclu. hydraulic testing as per iss inclu. making holes, grooving
in walls and roof and making good the damages .complete incliding water supply
connection for aquaguard, geycer etc complete as directed by Bank's
Engineer/Architect..
a) 15 mm dia cpvc pipe 80 RMT
RATE IN WORD:
RATE IN WORD:
RATE IN WORD:
RATE IN WORD:
RATE IN WORD:
RATE IN WORD:
RATE IN WORD:
RATE IN WORD:
RATE IN WORD:
RATE IN WORD:
RATE IN WORD:
RATE IN WORD:
RATE IN WORD:
RATE IN WORD:
RATE IN WORD:
RATE IN WORD:
Page 13 of 14
Sr. Particulars Qty. Unit Rate Amount (Rs.)
b) 20 mm dia cpvc pipe 80 RMT
c)32 mm dia cpvc pipe 105 RMT
2 Providing materials & labour for fixing 0n the exposed wall faces including labour,
following sizes of gi heavy c-class tata or equivalent make ,screwed and threaded joints
with supply of necessary gi specials of aproved "r"brand etc. specials like sockets,
unionnuts, elbow, bends, reducers, plugs, tees etc.inclu. supply of clamps, nails and
enamel paints, hemp yarn for water tight joints inclu. hydraulic testing as per iss inclu.
making holes, grooving in walls and roof and making good the damages are bringing to
good as the original including one coat of primer & 2 coats of enamel paints as directed
by the architect for flush valvesof the wcs. complete.
a) 32 mm DIA 20 RMT
3 Providing & fixing brass ball valve isi make zoloto or equivalent make with material &
labour complete.
a) 15 mm dia 11 NOS
b) 20 mm dia 11 NOS
c) 32 mm dia 11 NOS
TOTAL(J)
K DRAINAGE
1 Providing and fixing PVC pipes (3"or 4") of supreme/ prince or equivalent in position of
required size with special fittings, traps, bends, Y's , floor and nahani traps etc including
chemical sealed joints as required at site making necessary connections with existing
lines for waste water lines wherever necessary.
80 RMT
TOTAL(K)
TOTAL Part A- Civil + Furniture (A TO K) (Rs.)
ADD CGST 9% ON TOTAL
ADD SGST 9% ON TOTAL
GRAND TOTAL -Part A - Civil & Furniture
Total amount in words :
RATE IN WORD:
RATE IN WORD:
RATE IN WORD:
RATE IN WORD:
RATE IN WORD:
RATE IN WORD:
RATE IN WORD:
SEAL & SIGN OF CONTRACTOR.
Page 14 of 14
BILL OF QUANTITIES - Renovation of VOF and CH at NABARD Park, Santacruz(W), Mumbai
Part B - Electrical
Item No Item Description Qty Unit Rate Amount
A MCB - DB
1 Supply and fixing recessed in wall of 10 way TPN (8+6+30) with Per Phase Isolation
DBs in vertical type distribution board. The DB shall be made out of high quality CRCA
sheet steel and shall be pre treated and powder coated to give matt finish RAL 9010
and should have gaskets to ensure complete IP - 43 protection with Anti Insertion
Marking and spirit level to ensure the professional alignment and door shall have 180
deg opening and reversible type to avoid inconvenience during operation and
maintainence. The DB shall be as per IS 8623 part III and be suitable for 240 / 415 V,
50 Hz AC power supply. The DB shall be tested for a minimum dielectric strength of 2.5
kV / sec (but without MCB/ RCCB / Isolator) Equivalent to Hager Cat Ref: VYP10DH
5 Each
2 Supply and fixing in existing DB with connections, 63 Amp, Four pole, MCB. The
housing of MCB shall be made from heat resistant thermoplastic material and shall have
high impact strength. The MCB shall be current limiting type (Energy Limitation Class -
3) with 10 kA breaking capacity. MCBs terminals shall have provision for dual
termination. MCBs shall have non-breakable type Metal DIN clip with dual position
facility. MCB shall comply with latest relavent IS/IEC standard codes. i.e IS - 8828 -
1996 & IEC - 60898. Equivalent to Hager Cat Ref: NCN463N
5 Each
3 Supply and fixing in existing DB with connections, 40 Amp double pole (two module )
240 V High Immunity (HI) type residual current circuit breaker with over current
protection (RCBO) C - curve, 6kA breaking capacity. The RCBO shall comply with latest
IEC 61009 standards. RCBO shall be integral unit suitable for operating on 240/415 V
AC, 50 Hz electrical supply systems providing both over current and earth leakage
protection to installation. RCBO terminals shall have provision for dual termination with
non breakable type Metal DIN Clip with dual position facility. The RCBO should have
sensitivity current of 30mA. Equivalent to Hager Cat Ref: ADH990
15 Each
4 Supply and fixing in the existing DB with connection "under and over voltage protection
release" fitted and latched with existing MCB/RCCBs/RCBOs to disconnect the circuit
breaker if the voltage reduces below 170 V AC or above 267V AC. It shall also have no
tripping for voltage less than 60 V AC to avoid nuisance tripping during power failure at
the installation. Equivalent to Hager Cat Ref : MZ215
15 Each
5 Supply and fixing in existing DB, Blanking plates 18 Each
6 Supply and fixing in existing DB, C curve MCB 's ISI Marked 10 kA Breaking capacity of
:
6.1 10 Amp 35 Each
6.2 16 Amp 54 Each
6.3 25 Amp 35 Each
SUB TOTALS OF A
B Wiring (Circuit & Light Point )
RATE IN WORDS:
RATE IN WORDS:
RATE IN WORDS:
RATE IN WORDS:
RATE IN WORDS:
RATE IN WORDS:
RATE IN WORDS:
RATE IN WORDS:
1 of 6
Item No Item Description Qty Unit Rate Amount
1 Supplying and drawing wiring for circuit / submain wiring along with earth wire with
following size of FRLS PVC insulated copper conductor , single core stranded cable in
existing surface / recessed medium class PVC conduit
1.1 2 X 1.5 sqmm + 1 X 1.5 sq mm earth wire 532 RMT
1.2 2 X 2.5 Sq mm + 1 X 2.5 sq mm earth wire 504 RMT
1.3 2 X 4 sqmm + 1 X 4 sq mm earth wire 350 RMT
2 Supplying and drawing, wiring for attendant call bell along with 2 X 1.5 sqmm wire of
FRLS PVC insulated copper conductor, single core stranded cable in existing surface /
recessed medium class PVC conduit as required.
392 RMT
3 Supplying and drawing, wiring for twin control light point / fan point (2 way) in existing
surface / recessed medium class PVC conduit with 1.5 sq mm FRLS PVC insulated
copper conductor single core stranded cable with surface . Medium class PVC conduit
with 2 No.s 6 Amp , 2 way modular switch glossy white in existing switch plates and loop
(neutral + earthing ) the point with 1.5 sqmm FRLS PVC insulated copper conductor
single core stranded cable etc. as required.
34 Point
4 Supplying and drawing wiring for light point / fan point / exhaust fan point / call bell point
in existing surface / recessed medium class PVC conduit with 1.5 sq mm FRLS PVC
insulated copper conductor single core stranded cable with 1 No.s, 6 Amp, 1 way
modular switch glossy white with LED indicator or bell push as required in existing plate
and loop ( neutral + earthing ) the point with 1.5 sqmm FRLS PVC insulated copper
conductor single core cable etc. All primary points
231 Point
5 Supplying and fixing of following sizes of medium class PVC conduit (MMS) along with
accessories in surface / recess / under flooring including cutting the wall and making
good the same in case of recessed conduit as required.
5.1 20 mm 520 RMT
5.1 25 mm 322 RMT
5.2 32 mm 686 RMT
SUB TOTALS OF B
C ELECTRICAL SOCKETS AND SWITCHES
1 Supply and fixing recessed in wall switch boards with modular GI Box with modular
plates making all wiring connections as required of following sizes: (Approved Make :
Hager, Insysta, Legrand, Arteor, Scheider, Zencelo )
1.1 1 Module 80 Each
1.2 2 Module 16 Each
1.3 3 Module 76 Each
1.4 4 Module 12 Each
RATE IN WORDS:
RATE IN WORDS:
RATE IN WORDS:
RATE IN WORDS:
RATE IN WORDS:
RATE IN WORDS:
RATE IN WORDS:
RATE IN WORDS:
RATE IN WORDS:
RATE IN WORDS:
RATE IN WORDS:
RATE IN WORDS:
2 of 6
Item No Item Description Qty Unit Rate Amount
1.5 6 Module 36 Each
1.6 8 Module 18 Each
1.7 12 Module 16 Each
1.8 18 Module 14 Each
2 Supplying and fixing following modular wiring accessories on the existing modular plates
& switch box with wires including connections etc as required (Approved Make : Hager,
Insysta, Legrand, Arteor, Scheider, Zencelo )
2.1 120 W 2 module glossy white fan regulator 16 Each
2.2 6 A 1 Module glossy white bell push switch with LED indicator for attendant call bell 16 Each
2.3 6 A, 1 Module 1 way switch glossy white with LED 160 Each
2.4 6 A , 5 pin 2 Module glossy white universal socket 112 Each
2.5 1 Module glossy white RJ11 single phone outlet 20 Each
2.6 1 Module glossy white Co - Axial TV Socket 13 Each
2.7 2 Module glossy white buzzer 16 Each
2.8 2 Module 10/25 A glossy white socket 16 Each
2.9 2 Module 20 A 1 way switch glossy white with LED 32 Each
2.1 1 Module glossy white RJ 45 CAT 6 single inforamtion outlet 16 Each
2.11 2 Module glossy white blanking plate 135 Each
2.12 2 Module 6/16 A glossy white protruded socket 12 Each
SUB TOTALS OF C
D VOICE AND DATA CABLING
1 Supplying and drawing 2 pairs 0.5 mm dia FRLS PVC insulated annealed copper
conductor, unarmoured telephone cable in the existing surface / recessed PVC conduit
as required.
343 RMT
RATE IN WORDS:
RATE IN WORDS:
RATE IN WORDS:
RATE IN WORDS:
RATE IN WORDS:
RATE IN WORDS:
RATE IN WORDS:
RATE IN WORDS:
RATE IN WORDS:
RATE IN WORDS:
RATE IN WORDS:
RATE IN WORDS:
RATE IN WORDS:
RATE IN WORDS:
RATE IN WORDS:
RATE IN WORDS:
RATE IN WORDS:
RATE IN WORDS:
3 of 6
Item No Item Description Qty Unit Rate Amount
2 Supplying and drawing co axial TV cable RG 6 Grade 0.7 mm solid copper conductor
PVC insulated shielded with fine tinned copper braid and protected with PVC sheath in
the existing surface / recessed PVC conduit as required
224 RMT
3 Supplying and drawing of UTP 4 pair CAT 6 LAN cable in the existing surface /
recessed PVC conduit as required
350 RMT
4 Supplying and fixing of following sizes of medium class PVC conduit along with
accessories in surface / recess including cutting the wall and making good the same in
case of recessed conduit as required.
4.1 20 mm 550 RMT
4.2 25 mm 546 RMT
4.3 32 mm 546 RMT
5 Supplying and fixing on the wall 1 No.s of wall mounted 12 U network rack (Dlink/ Digi
Link) with 1 No.s 24 port jack panel and terminating all CAT 6 cables in the jack panel
with ferrules as required
1 Each
6 Supplying and fixing on the wall 1 Nos. PVC krone box, suitable for 20 pair krone
modules with 2 no.s steel back mounting krone module frame 10 krone module with 2
nos 10 pair krone module with terminating all phone cables with ferrules as required.
1 Each
SUB TOTALS OF D
E ELECTRICAL FIXTURES
1 Supplying and fixing on existing ceiling fan hook ceiling fan 1200 mm sweep, white,
Crompton high speed, with all accessories but without regulator with fixing on existing
ceiling fan hook with flexible wires and connection to ceiling fan point as required.
6 Each
2 Supplying and fixing of ceiling fan 1200 mm sweep, white, Cromption high speed, with
all accessories but without regulator, with anchor dash fastners and ceiling fan hook for
fixing on ceiling with flexible wires and connection to ceiling fan point as required
10 Each
3 Supplying fixing exhaust fan 225-230 mm sweep grey color Crompton, MS metal body
and blade double ball bearing metal grill guard on wall / window with wires and
connection to exhaust fan point as required.
2 Each
4 Supplying and fixing exhaust fan 150 mm sweep Cropmton Mountair square profile
white color on window /wall wires and connection to exhaust fan point as required.
11 Each
5 Supply and fixing in existing cove, LED strip light 3000 K (Warm White), 4 watt per
meter, with aluminium profile with driver and with all accessories with wires and
connection to light point.
55 RMT
6 Supplying and fixing in existing false ceiling cove, LED strip light 6000K (Cool White), 4
watt per meter, with aluminium profile with driver and with all accessories with wires and
connection to light point as required.
26 RMT
RATE IN WORDS:
RATE IN WORDS:
RATE IN WORDS:
RATE IN WORDS:
RATE IN WORDS:
RATE IN WORDS:
RATE IN WORDS:
RATE IN WORDS:
RATE IN WORDS:
RATE IN WORDS:
RATE IN WORDS:
RATE IN WORDS:
4 of 6
Item No Item Description Qty Unit Rate Amount
7 Supply and fixing in existing false ceiling, recessed LED square downlight, white colored
bezel 6000K (Cool White) with PMMA Diffuser, 8 watt 760- lumens with LED driver and
with all accessories with wires and connection to light point as required.
108 Each
8 Supply and fixing in existing false ceiling, recessed LED square downlight, white colored
bezel 6000K (Cool White) with PMMA Diffuser, 8 watt with LED driver and with all
accessories with wires and connection to light point as required.
16 Each
9 Supply and fixing on ceiling surface, LED square downlight, white body 6000K (Cool
White) with PMMA Diffuser, 8 watt with LED driver with all accessories with wires and
connection to light point as required.
22 Each
10 Supply and fixing on wall, LED up - down light, 4000K (Neutral White), 290 Lumen, 4
watt, with LED driver and with all accessories and with wires and connection to light
point as required.
5 Each
11 Supply and fixing in false ceiling, recessed square LED accent light, 4000K (Neutral
White), 3 watt with LED driver and with all accessories and with wires and connection
with light point as required.
10 Each
12 Supply and fixing, recessed in wall LED skirting light, glossy white, 6 lumens, 350
mWatt, Hager CAT. Ref WSNH62 with 2 module recessed GI wall box with plates and
with all accessories and with wires and connection to light point as required.
10 Each
13 Supply and fixing, recessed on wall, attandant station with 1 No.s 18 module plastic fire
resistant gang box and 1 No.s 16 module plastic fire resistant gang box with 1 Nos 18
module cover plate and support frame, black colour with 1 Nos 16 module cover plate
and support frame black colour with 11 no.s 2 module electronic buzzer (GM Modular
Cat Ref AA 2049) with 11 no.s 1 module bell indicator display unit reset switch name
plate ( GM Modular Cat Ref AA 1050) with blanking plate and making all necessary
connections with all accessories with labelling for room indentification as required.
1 Each
14 Supply and fixing on wall, LED tube light, 4000K 5 watt GM Modular Cat Ref: NEBULUS
GM 0143 with intergral LED driver with all accessories and with wires and connection to
light point as required.
11 Each
15 Supply and fixing on wall, LED flexible gooseneck reading lamp, white body colour 5000-
6000K 3Watt with integral LED driver and with wires and connection to light point as
required
16 Each
16 Supply and fixing on wall, storage water heater 3 litre, 3000 watt, 230 - 240 V white
body colour, shock safe plug, with hot and cold connection pipes with all accessories
and connecting to inlet and outlet water plumbing pipes as required. Approved Make -
Racold (Pronto)
13 Each
17 Supply and fixing of chandelier in community hall area according the requirement, with
architect's approval. (Basic price of the item - Rs 8,500/-)
3 Each
SUB TOTAL OF E
F DISMANTLING WORK & BUY BACK OF REMOVED ITEMS
RATE IN WORDS:
RATE IN WORDS:
RATE IN WORDS:
RATE IN WORDS:
RATE IN WORDS:
RATE IN WORDS:
RATE IN WORDS:
RATE IN WORDS:
RATE IN WORDS:
RATE IN WORDS:
RATE IN WORDS:
RATE IN WORDS:
5 of 6
Item No Item Description Qty Unit Rate Amount
1 Less amount for buy back rebate to NABARD after Dismantling and removing and
carting away all the existing old and removed PVC conduit pipes, electrical fixtures &
fittings, PVC insulated copper wiring, switch borads switches , all existing old cables.
LS LS
Total Electrical(A+ B+ C+ D+ E - F)
G CGST @ 9%
H SGST @ 9%
Grand Total - Part B - Electrical
RATE IN WORDS:
TOTAL in words:
6 of 6
BILL OF QUANTITIES - Renovation of VOF and CH at NABARD Park, Santacruz(W), Mumbai
Part C - Air Conditioning
Item No. Item Description QtyUnit Rate Amount
1 Split Air Conditioners
Supply, Installation & Commissioning of 100% copper condensor 3
star rating, Aircooled split type Airconditioners comprising indoor
unit & outdoor unit on wall, installation with standard 10 feet length
refrigerant copper piping and pipe insulation and communication
and power cables between indoor and outdoor units and drain pipe
and MS Powder coated stand for outdoor unit complete with all
accessories including remote control with batteries and with
refrigerant gas commissioning and making and filling the
cutout/holes in the walls with cement mortar and finish with plain
cement plaster complete as directed at site. (Make : Bluestar /
Daikin / Hitachi / Carrier )
1.1 1.0 TR Split AC 3 Star 2 No.s
1.2 1.5 TR Split AC 3 Star 9 No.s
1.3 2.0 TR Split AC 3 Star 6 No.s
2 Additional Refrigerant piping, refrigerant gas and accessories
Supply, Installation & Commissioning of refrigerant copper piping
and piping insulation and communication and power cables
between indoor and outdoor units, complete with fittings, elbows,
bends, supporting arrangement on walls , cable trays,trenches and
commissioning with refrigerant gas complete as directed on site.
2.1 1.0 TR Split AC for above mentioned unit 10 RFT
2.2 1.5 TR Split AC for above mentioned unit 30 RFT
2.3 2.0 TR Split AC for above mentioned unit 10 RFT
3 Additional Drain piping & accessories
Supply and fixing of Condensate drain water piping constructed out
of PVC hard pipes, fittings, accessories, bends , elbows, tees,
flanges. Tappings, wall sleeves, hangers, supports, anchors
complete as directed at site.
3.1 25 mm nom. dia 45 RMT
3.2 32 mm nom. Dia 75 RMT
Total Part C- Air Conditioning
CGST @ 9 %
SGST @ 9%
RATE IN WORDS:
RATE IN WORDS:
RATE IN WORDS:
RATE IN WORDS:
RATE IN WORDS:
RATE IN WORDS:
RATE IN WORDS:
RATE IN WORDS:
Page 1 of 2
Grand Total Part C- Air Conditioning
Abstract
Grand total Part A - Civil & Furniture , inclusive of GST
Grand total Part B - Electrical, inclusive of GST
Grand total Part C - Air Conditioning, inclusive of GST
Grand Total - Part A + Part B+ Part C
Place :
Date :
Name, Seal & Address of the contrator :
1. The L-1 agency will be decided on the basis of total amount of price bid.
2. The contractor has to quote for all the items of the tender. Incomplete tenders and without EMD will not be accepted.
Accepted all terms & conditions of technical & price/financial bid
TOTAL in words :
Grand Total in words:
Page 2 of 2