Post on 23-Jul-2020
Plato PProducts, IInc. 18731 Railroad St., Industry, CA 91748, USA • (800) 423-4510 • (626) 965-8044 • Fax (626) 965-8960 • http://www.platoproducts.com • sales@platoproducts.com
®
1
SOFTWEEZERS
SOLDER POT DROSS SKIMMER
PORCELAINIZED CRUCIBLE
170 SMD CUTTER
DESOLDERING TIP CLEANING TOOL
PLATO TIPS TO FIT ERSA SOLDERING STATIONS
.016" (0.4)
ER-4005
.030" (0.8)
ER-4004
.015" (0.4)
ER-4006
.062" (1.6)
ER-3999
.158" (4.0)PFER-5003
.165" (4.2)
SEE PAGE 4
Designed for use in restricted areas.Includes unique SAF-T-LINK® feature for greater operator safety.
SEE PAGE 5
• Reduces cross contamination• Wipes clean• Corrosion resistant
SEE PAGE 5
• Stainless steel blade allows for easyand safe dross removal
SEE PAGE 13
• Ergonomically designed• Improves operator control• Reduces operator fatigue• ESD and clean room safe
SEE PAGE 11
Clears unwanted solder and flux “build-up” from desoldering tips. A great tip maintenance tool.
SEE PAGE 31
For soldering stations using 602 and 832 series of tips. A wide selection of tip shapes to choose from.
TABLE OF CONTENTSPAGE
Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11Desoldering Tip Cleaning Tool . . . . . . . . . . . . . . . . . . . .11Soldering Iron Holders . . . . . . . . . . . . . . . . . . . . . . . . . .11Tip Polishing Bar . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11
Brush SScrub BBottles . . . . . . . . . . . . . . . . . . . . . . . . . .9Cross RReference . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-3Cleaning SSponges . . . . . . . . . . . . . . . . . . . . . . . . . . .10Cutters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4Desoldering BBraid . . . . . . . . . . . . . . . . . . . . . . . . . . . .7Desoldering EEquipment . . . . . . . . . . . . . . . . . . . . . .6Desoldering TTips tto FFit:
Air-Vac® . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .34A.P.E.® . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .34Edsyn® . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .35Hakko® . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .36OK Industries® . . . . . . . . . . . . . . . . . . . . . . . . . . . . .35-36Pace® . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .34-35, 39Plato® . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .37Weller® . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .37
Flux && Liquid DDispensers . . . . . . . . . . . . . . . . . . .8-9Lead FFormers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4Platoshear LLead CCutters && Formers . . . . . . . .4, 8Retinning CCompound . . . . . . . . . . . . . . . . . . . . . . . .11Shears . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4Solder PPots . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5Soldering TTip CCross RReference . . . . . . . . . . . . .2-3Soldering TTips tto FFit:
American Beauty® . . . . . . . . . . . . . . . . . . . . . . . .39, 40-44Antex® . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .38A.P.E.® . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .34, 39Bonkote® . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .27-28Edsyn® . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .29Elvo® . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .30Ersa® . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .31Esico® . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .39-44Hakko® . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .20-25Hexacon® . . . . . . . . . . . . . . . . . . . . . . . . . . .26-27, 39-44OK Industries® . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .30Oryx® . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .38Pace® . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .32-35, 39Start® . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .30Weller®/Ungar® . . . . . . . . . . . . . . . . . . . . . . . . . .14-19, 44Xytronics® . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .30
Sponges ffor RReplacement . . . . . . . . . . . . . . . . . . .10Tinning CCompound . . . . . . . . . . . . . . . . . . . . . . . . . .11Tweezers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .12-13Wick ffor SSolder RRemoval . . . . . . . . . . . . . . . . . . . . .7
NEW PRODUCTS
NEW!
NEW!
NEW!
NEW!
NEW!
NEW!
Plato PProducts, IInc. 18731 Railroad St., Industry, CA 91748, USA • (800) 423-4510 • (626) 965-8044 • Fax (626) 965-8960 • http://www.platoproducts.com • sales@platoproducts.com
®
Cross Reference2
SOLDERING TIPSPart Number CrossReferenceA.P.E.® Plato® Pg._______________________________1212-0125 22-1627 341212-0016 22-2931 341212-0001 22-4927 34
AmericanBeauty® Plato® Pg._______________________________67-S 44-105 42271 22-315 39501 22-127 39502 22-142 39503 21-175 39507 22-320 39509 22-428 39510 22-449 39512 21-572 39524 20-851 39604 31-150 40605 32-168 40607 32-168 40613 32-306 40615 32-338 40617 33-364 40619 33-395 40621 33-464 40625 33-415 40626 32-660 40630 32-402 40643 33-131 40701 42-117 41703 42-138 41704 44-152 41706 41-199 41714 42-347 41715 44-352 41716 42-355 41720 44-386 41721 44-390 41724 44-443 41730 42-713 42738 44-611 42739 42-685 42
Antex® Plato® Pg._______________________________2-IC A-108 382-IS A-521 386-NS A-5217 388-I A-417 3846-IC A-144 3846-IS A-542 3846-NS A-5890 38
Bonkote® Plato® Pg._______________________________5-0.5C BKT-5897 275-1C BKT-5899 275-2B BKT-8144 275-2BC BKT-5900 275-2C BKT-5898 275-2D BKT-6079 277-1C BKT-5736 287-2B BKT-4835 287-3C BKT-5738 287-5A BKT-2046 287-5B BKT-4836 287-KF BKT-0954 2810-4C BKT-5777 2810-6B BKT-4832 2810-6C BKT-5778 2810-8B BKT-4857 2810-8D BKT-2792 2810-KF BKT-0940 28
Edsyn Loner® Plato® Pg._______________________________LT-374 E-4709 29LT-375 E-2621 29LT-376 E-2622 29LT-381 E-8134 29LT-383 E-4781 29LT-392 E-4711 29LT-393 E-5649 29LT-394 E-2627 29LT-395 E-2625 29LT-425 E-2626 29LT-429 E-4710 29LT-430 E-5892 29LT-431 E-2624 29LT-444-1 E-6060 29LT-444 E-2856 29LT-445 E-5891 29LT-446 E-4708 29
Elvo® Plato® Pg._______________________________501 CI-4713 30506 CI-2629 30507 CI-2642 30509 CI-4717 30E221 TX-300 30E231 TX-440 30E241 TX-322 30E251 TX-367 30E261 TX-314 30
HT359 42-355 41HT361 21-175 39HT376 22-142 39HT382 44-3513 42HT397 44-386 41HT417 44-390 41HT426 44-715 42HT449 66-300 44HT451 42-117 41HT452 42-685 42HT453 40-712 42HT463 43-754 41HT468 44-105 42HT470 66-349 44HT472 66-911 44HT473 43-799 42HT474 32-168 40HT477 22-315 39HT479 32-660 40HT499 1010-184 44HT506 55-316 43HT511 20-851 39HT513 42-628 41HT547 55-118 43HT548 32-338 40HT550 55-321 43HT552 46-626 41HT553 44-152 41HT556 55-336 43HT560 22-320 39HT566 66-201 43HT586 44-706 41HT685 42-683 42HT691 41-199 41HT693 21-572 39HT699 42-355 41HT773 46-912 42HT841 42-713 42HT880X PS-383 27HT881X PS-594 27HT882X PS-411 27HT883X PS-512 27HT884X PS-555 27HT885X PS-372 27HT886X PS-157 27HT891 1010-104 44HT892 33-3396 40HT944 22-2931 39J101X CH-3550 26J102X CH-3551 26J201X CH-3487 26J202X CH-3488 26J203X CH-5286 26J204X CH-5287 26J206X CH-1194 26J301X CH-3489 26J302X CH-3534 26J901X CH-8136 26J910X CH-2458 26J911X CH-5557 26J912X CH-3868 26J914X CH-8137 26J915X CH-4427 26J916X CH-4621 26J917X CH-4299 26J918X CH-1655 26J919X CH-6040 26J932X CH-8138 26J935X CH-3867 26J940X CH-3552 26J954X CH-4314 26
OK Ind® Plato® Pg._______________________________SAT-310X10 CI-4713 30SAT-310X20 CI-2629 30SAT-310X30 CI-2642 30SAT-310X40 CI-4717 30SAT-310X50 CI-5651 30SAT-310X60 CI-5652 30SAT-3X10 TX-440 30SAT-3X20 TX-406 30SAT-3X30 TX-300 30SAT-3X40 TX-314 30SAT-3X50 TX-322 30SAT-3X60 TX-429 30SAT-3X70 TX-338 30SAT-3X80 TX-343 30SAT-3X90 TX-351 30SAT-3X100 TX-367 30SAT-3X110 TX-7051 30SAT-3X120 TX-7052 30SAT-3X130 TX-7053 30SAT-3X140 TX-6085 30SAT-3X150 TX-6086 30
Oryx® Plato® Pg._______________________________P O-5214 38X O-4209 38X-PL O-408 38
Pace® Plato® Pg._______________________________1121-0130 22-1627 341121-0131 22-2931 341121-0132 22-4927 341121-0238 22-7071 341121-0302 SMP-2001 331121-0303 SMP-2002 331121-0304 SMP-2003 331121-0305 SMP-2005 331121-0335 33-6055 321121-0336 33-8142 32
900L-T-3.2D HS-2755 22900L-T-B HS-4788 22900L-T-I HS-4790 22900L-T-K HS-0922 22900L-T-LB HS-8177 22900L-T-S1 HS-1666 22900M-T-0.2RB HS-4791 20900M-T-0.5C HS-5715 20900M-T-0.8C HS-5716 20900M-T-1C HS-5701 20900M-T-1.5CF HS-5861 20900M-T-2C HS-5702 20900M-T-3C HS-5703 20900M-T-4C HS-5875 20900M-T-0.8D HS-2863 20900M-T-1.2D HS-2796 20900M-T-1.6D HS-2751 20900M-T-2.4D HS-2752 20900M-T-3.2D HS-2753 20900M-T-1.8H HS-0926 20900M-T-1.2LD HS-6030 20900M-T-2LD HS-6092 20900M-T-3.2LD HS-6093 20900M-T-B HS-4785 20900M-T-H HS-0925 20900M-T-I HS-4787 20900M-T-K HS-0927 20900M-T-LB HS-4786 20900M-T-R HS-0923 21900M-T-RT HS-0924 21900M-T-SB HS-4792 21900M-T-SMD HS-4988 21900M-T-S3 HS-1665 21900M-T-S4 HS-8175 21900M-T-S5 HS-8157 21900M-T-S6 HS-5827 21900M-T-S7 HS-5826 21900S-T-B HS-4875 21900S-T-1.6D HS-2847 21900S-T-I HS-4878 21918-T-3C HS-5807 23918-T-4C HS-5877 23918-T-5C HS-5878 23918-T-1.6D HS-2938 23918-T-2.4D HS-2939 23918-T-3.2D HS-6029 23918-T-B HS-4838 23918-T-BC HS-5806 23920-T-2C HS-5781 24920-T-3C HS-5857 24920-T-4C HS-5859 24920-T-1.0D HS-6095 24920-T-1.6D HS-2936 24920-T-2.4D HS-2937 24920-T-3.2D HS-2818 24920-T-B HS-4840 24920-T-BC HS-5805 24920-T-D HS-2937 24920-T-I HS-4933 24920-T-R HS-0876 24920-T-RT HS-0877 24980-T-B HS-5710 24980-T-BC HS-5711 24980-T-D HS-5712 24BB3 300-8179 23BB4 400-8182 23BB6 600-8181 23N452-T-B HS-4860 25N452-T-C HS-5879 25N452-T-D HS-1647 25N452-T-I HS-4904 25N452-T-SB HS-8126 25N452-T-SC HS-5880 25N452-T-SD HS-1646 25N452-T-1C HS-5881 25N452-T-2C HS-5882 25N452-T-3C HS-5883 25N452-T-4C HS-5884 25N454-T-B HS-4903 25N454-T-D HS-1648 25N454-T-I HS-8127 25N454-T-2C HS-5885 25N454-T-3C HS-5886 25N454-T-4C HS-5887 25N454-T-5C HS-5888 25
Hexacon® Plato® Pg._______________________________HT104 20-851 39HT108 66-409 43HT118 32-402 40HT129 66-367 43HT131 44-653 42HT145 63-155 43HT151 66-145 43HT159 41-545 41HT178 1010-397 44HT190 33-395 40HT195 33-131 40HT202 44-611 42HT207 33-364 40HT220 31-517 40HT222 22-449 39HT249 22-127 39HT256 1010-286 44HT276 31-150 40HT281 33-415 40HT313 44-352 41HT324 42-138 41HT331 22-687 39HT343 44-443 41HT356 42-619 42HT358 42-347 41
E281 TX-343 30E291 TX-351 30E301 TX-406 30E311 TX-338 30
Ersa® Plato® Pg._______________________________602BD ER-4743 31602CD ER-2675 31602ED ER-2676 31602KD ER-2643 31602SD ER-4742 31602UD ER-8550 31602VD ER-2678 31832BD ER-4002 31832CD ER-3998 31832DD ER-5001 31832ED ER-3101 31832FD ER-5002 31832ID ER-4003 31832KD ER-3997 31832OD ER-0975 31832UD ER-4005 31832SD ER-4004 31832YD ER-3999 31832PW ER-5003 31
Esico® Plato® Pg._______________________________210-107 22-142 39210-114 22-142 39210-132 22-127 39210-143 22-127 39211-105 21-175 39211-127 21-175 39220-103 22-320 39220-116 22-320 39240-102 22-449 39240-111 22-449 39251-120 21-572 39251-131 21-572 39310-108 33-131 40310-115 33-131 40311-103 31-150 40311-124 31-150 40312-105 32-168 40312-116 32-168 40320-109 33-364 40320-118 33-364 40320-136 33-395 40320-144 33-395 40322-104 32-306 40322-117 32-306 40322-220 32-338 40322-146 32-338 40340-107 33-464 40340-114 33-464 40342-112 32-660 40342-119 32-660 40410-126 44-152 41410-140 44-152 41411-107 41-199 41411-123 41-199 41412-103 42-117 41412-110 42-683 42412-131 42-117 41412-159 42-138 41412-246 42-138 41413-102 43-754 41413-117 43-799 42420-106 44-390 41420-114 44-715 42420-119 44-390 41420-130 44-611 42420-143 44-386 41420-164 44-386 41420-201 44-706 41422-113 42-619 42422-132 42-355 41422-144 42-347 41422-347 42-347 41426-161 46-626 41426-173 46-626 41426-189 46-912 42440-129 44-443 41440-138 44-653 42440-177 44-443 41442-139 42-628 41442-147 42-685 42442-153 42-628 41451-146 41-545 41451-167 41-545 41610-102 66-145 43613-103 63-155 43620-126 66-627 44620-383 66-300 44630-107 66-201 43640-169 66-409 43640-190 66-911 441010-119 1010-184 441030-101 1010-286 44
Hakko® Plato® Pg._______________________________582-T-4 400-8148 23585-T-6 600-8149 23587-T-8 800-8150 23900L-T-2B HS-4789 22900L-T-2C HS-5705 22900L-T-3C HS-5706 22900L-T-4C HS-5707 22900L-T-5C HS-5876 22900L-T-1.6D HS-6094 22900L-T-2.4D HS-6027 22
1121-0337 33-6058 321121-0339 22-8001 341121-0340 22-8003 341121-0349 33-1657 321121-0357 33-8141 321121-0358 33-1658 321121-0359 33-1144 321121-0360 33-6057 321121-0361 33-1146 321121-0363 33-8143 321121-0402 SMP-2004 331121-0406 33-5894 321121-0414 33-6056 321121-0490 33-5895 321121-0499 33-1147 321121-0500 33-1148 321121-0501 22-1071 341121-0502 22-6072 341121-0503 22-8002 341121-0504 22-5073 341121-0510 33-3985 331121-0516 33-3981 331121-0518 33-3986 331121-0524 33-3983 331121-0525 33-3984 331121-0526 33-3982 331121-0527 33-7102 331121-0528 33-7101 331121-0529 33-7104 331121-0530 33-7105 331121-0531 33-7106 331121-0532 33-7107 331121-0533 33-7103 331121-0563 33-5896 321121-0564 33-5897 321121-0610 33-5898 321360-0083 33-0001 34
Start® Plato® Pg._______________________________501 CI-4713 30506 CI-2629 30507 CI-2642 30509 CI-4717 30822 TX-300 30823 TX-440 30824 TX-322 30825 TX-367 30826 TX-314 30
Weller®/Ungar® Plato® Pg._______________________________9010 UC-8801 199011 UC-7001 199012 UC-6100 199013 UC-7002 199014 UC-7003 199015 UC-6101 199016 UC-6110 199017 UC-6102 199018 UC-6103 199019 UC-7004 199050 UC-8802 199051 UC-6104 199052 UC-7005 199056 UC-8803 199057 UC-6105 199058 UC-6106 199059 UC-6107 199060 UC-6108 199061 UC-6109 19CT5A 4C-3241 17CT5B 4C-3242 17CT5C 4C-3243 17CT5D 4C-3244 17CT5E 4C-1080 17CT6C 6C-3219 17CT6D 6C-3220 17CT6E 6C-3221 17CT6F 6C-1083 17EPH101 RX-4762 16EPH102 RX-402 16EPH103 RX-513 16EPH104 RX-404 16EPH105 RX-515 16EPH106 RX-306 16EPH107 RX-307 16EPH109 RX-409 16EPH110 RX-401 16EPH111 RX-4764 16EPH112 RX-4763 16ETA EW-303 15ETB EW-305 15ETC EW-307 15ETD EW-103 15ETH EW-301 15ETJ EW-302 15ETK EW-304 15ETJL EW-0939 15ETL EW-306 15ETM EW-308 15ETMX EW-0603 15ETO EW-404 15ETP EW-403 15ETR EW-101 15ETS EW-402 15ETSMD 2.5mm EW-0940 15ETSMD 3.8mm EW-0941 15ETT EW-401 15ETAA EW-513 15ETBB EW-515 15
Plato PProducts, IInc. 18731 Railroad St., Industry, CA 91748, USA • (800) 423-4510 • (626) 965-8044 • Fax (626) 965-8960 • http://www.platoproducts.com • sales@platoproducts.com
®
Cross Reference 3
ETCC EW-517 15ETDD EW-519 15MPT-1 DX-4771 18MPT-1S DX-4814 18MPT-4 DX-5590 18MPT-6 DX-1500 18MPT-A DX-2684 18MPT-B DX-2726 18MPT-H DX-2683 18MPT-HX DX-2987 18MT-GW DX-5551 18MT-JL DX-0601 18PTA* C-3039 14PTB* C-3040 14PTC* C-3036 14PTD* C-1016 14PTE* C-1017 14PTF* C-593 14PTH* C-3100 14PTJ* C-3865 14PTK* C-3043 14PTL* C-3044 14PTM* C-3102 14PTO* C-4223 14PTMX* C-0602 14PTP* C-462 14PTQ* C-5101 14PTR* C-1021 14PTS* C-494 14PTT* C-4309 14PTX* C-9100 14PTZ* C-983 14PTAA* C-5139 14PTBB* C-5143 14PTCC* C-5141 14PTDD* C-5142 14ST-1 44-3870 16ST-2 44-3871 16ST-3 44-3872 16ST-4 44-1312 16ST-6 44-3873 16ST-7 44-8182 16ST-8 41-1313 16*A temperature designing number is used by bothPlato and Weller, e.g. Weller PTA-7 is equilvalent toPlato C-3039-7.
Xytronic® Plato® Pg._______________________________501 CI-4713 30506 CI-2629 30507 CI-2642 30509 CI-4717 30822 TX-300 30823 TX-440 30824 TX-322 30825 TX-367 30826 TX-314 30
DESOLDERINGTIPSPart Number CrossReferenceAir-Vac® Plato® Pg._______________________________22 20-0109 3430 20-0110-HW 3436 20-0110-HW 3445 20-0110-HW 3451 20-0113 3460 20-0111-HW 3461 20-0111-HW 3490 20-0112 3495 20-0112 34
A.P.E.® Plato® Pg._______________________________1212-0025 20-0109 341212-0040 20-0110 341212-0050 20-0113 341212-0060 20-0111 341212-0080 20-0112 341212-0081 20-0112 341212-0082 20-0111 341212-0083 20-0113 341212-0084 20-0110 341212-0085 20-0109 341212-0440 20-0110-HW 341212-0550 20-0113-HW 341212-0660 20-0111-HW 34
Edsyn Loner® Plato® Pg._______________________________ZD08 EZ-030 35ZD09 EZ-070 35ZD10 EZ-040 35ZD11 EZ-050 35ZD12 EZ-030 35ZD13 EZ-040 35ZD14 EZ-050 35ZD18 EZ-070 35
Hakko® Plato® Pg._______________________________481-T-0.8 TM-007 36481-T-1.0 TM-010 36481-T-1.3 TM-013 36481-T-1.6 TM-015 36
483-T-0.8 HK-0008 36483-T-1.0 HK-0010 36483-T-1.0S HKL-0010 36483-T-1.3 HK-0013 36483-T-1.6 HK-0016 36800-T-0.8 HK-0008 36800-T-1.0 HK-0010 36800-T-1.0S HKL-0010 36800-T-1.3 HK-0013 36800-T-1.6 HK-0016 36A-1002 HK-0878 36A-1003 HK-0879 36A-1004 HK-0880 36A-1005 HK-0881 36A-1006 HK-0882 36A-1007 HK-0883 36
OK Ind.® Plato® Pg._______________________________BTR-D-027 OO-0737 35BTR-D-031 OO-0738 35BTR-D-039 OO-0739 35BTR-D-047 OO-0740 35BTR-D-063 OO-0741 35SAT-4-031 TM-007 36SAT-4-039 TM-010 36SAT-4-051 TM-013 36SAT-4-063 TM-015 36SAT-4V-031 HK-0008 36SAT-4V-039 HK-0010 36SAT-4V-051 HK-0013 36SAT-4V-063 HK-0016 36
Pace® Plato® Pg._______________________________1121-0091 20-0112 341121-0213 20-0109 341121-0215 20-0110HW 341121-0216 20-0113 341121-0216 20-0113HW 341121-0217 20-0111 341121-0217 20-0111HW 341121-0254 20-040HW 341121-0255 20-060 341121-0255 20-060HW 341121-0261 20-0030 341121-0262 20-0040 341121-0267 20-0060 341121-0342 30-0400 351121-0367 30-0300 351121-0368 30-0600 351121-0369 30-0060 351121-0462 30-030 351121-0463 30-040 351121-0464 30-060 351121-0465 30-6000 351121-0479 20-0110 341121-0480 20-0114 341121-0485 20-025 341121-0486 20-040 341121-0494 30-0004 351121-0505 30-0003 351121-0506 30-0006 351121-0507 30-0900 351360-0083 33-0001 34
Weller® Plato® Pg._______________________________DS-110 T-0138 37DS-110 TM-10 37DS-112 T-0139 37DS-112 TM-12 37DS-113 T-0140 37DS-113 TM-13 37DS-114 T-0141 37DS-114 TM-14 37DS-115 TM-17 37DS-116 TM-16 37DS-116 T-0136 37DS-117 TM-18 37DS-117 T-0137 37DST 1 T-0261 37DST 2 T-0262 37DST 4 T-0264 37DST 5 T-0265 37
TIP CLEANINGSPONGESPart Number CrossReferenceAmerican Beauty® Plato® Pg._______________________________480S CS-5 10
Desco® Plato® Pg._______________________________4101 CS-5 10
Edsyn Loner® Plato® Pg._______________________________RS-199 CS-40 10SH-230 Holder CS-40 10
Hakko® Plato® Pg._______________________________A-1024 CS-44 10A-1024 CS-44M 10607 Holder CS-44 10
607 Holder CS-44M 10609-029 CS-44 10609-029 CS-44M 10609 Holder CS-44 10609 Holder CS-44M 10631 Holder CS-44 10631 Holder CS-44M 10632 CS-44 10632 CS-44M 10926-029B CS-43 10926 Holder CS-43 10700 Holder CS-43 10
Hexacon® Plato® Pg._______________________________893A Holder CS-36 108101 CS-9 108101C CS-9 108121 CS-9 108121C CS-9 108141 CS-36 108141C CS-36 10MV15/16 CS-36 10
Lerloy® Plato® Pg._______________________________65N CS-5 10
Marshall® Plato® Pg._______________________________CM100B CS-5 10
Metcal® Plato® Pg._______________________________STSS-YS1 CS-12 10STSS-YS3 CS-47 10
Pace® Plato® Pg._______________________________4021-0005 CS-1 10
Ungar® Plato® Pg._______________________________9904 CS-44 109904 CS-44M 10UTC234 CS-47 10
Weller® Plato® Pg._______________________________892MS CS-33 10896MS CS-33 1052241999 CS-14 1052241999 CS-14M 10DS-106 CS-36 10EC-205 CS-33 10MF20/21 CS-33 10SP-60 CS-1 10TC-205 CS-44 10TC-205 CS-44M 10While there may be slight differences between someof the part numbers cross-referenced in this catalog,we believe each Plato part number is functionallycomparable to the corresponding competitive partnumber listed.Make sure you are ordering from Plato’s currentcatalog. Plato’s specifications, tolerances, productsand terms of sale may be changed from time to time.This catalog supersedes any prior Plato catalogsconcerning the products described herein, and, inturn will be superseded by any subsequent Platocatalog covering these products. The date of issueof this catalog ZPM-1100 is November 2000. Copyright © Plato Products, Inc.® 1999. We acknowledge thefollowing trademarks: A.P.E.® is a registeredtrademark of Automated Production Equipment, Inc.;Antex® is a registered trademark of AntexElectronics Ltd.; Edsyn® is a registered trademark ofEdsyn®; Esico® is a registered trademark of ElectricSoldering Iron Co., Inc.; Hakko® is a registeredtrademark of Hakko Metal Industries, Ltd.; O.K.®Industries is a registered trademark of O.K.®Industries; Litesold® is a registered trademark ofLight Soldering Developments Ltd.; Pace® is aregistered trademark of Pace, Inc.; Adaptip®,Thermo-Drive®, SODR-PEN®, are registeredtrademarks of Pace, Inc.; Loner® is a registeredtrademark of Edsyn®; Paragon® is a registeredtrademark of Assembly Technologies Int’l; Therm-O-Trac® is a registered trademark of Hexacon ElectricCo.; Weller® is a registered trademark of CooperIndustries, Inc.; Zeva® is a registered trademark ofZeva GmbH; Adcola® is a registered trademark ofAdcola Products Ltd.; Ersa® is a registeredtrademark of Ersa; Ungar® is a registered trademarkof Ungar.
HEALTH ADVISORYLead, a component of most solders, is known to theState of California to cause cancer and birth defects.To minimize the risk of breathing or otherwiseingesting hazardous materials, the solderingworkstation area should be kept clean of solder andchemical residues and adequately ventilated. Fumesgenerated during soldering may also be removed byfume removal equipment. Additionally, operatorsshould wash their hands prior to eating and shouldroutinely wash their work clothing.
4
PLATOSHEAR 170Flush cuts component leads as large as 18 AWG copper wire(.040"/1.0mm). Weighs 1.8oz. (51g) and is 5.15" (131mm) long.
PLATOSHEAR 175Same as Platoshear 170 but with a permanently attached safetyguard that reduces the risk of lead fly-off.
PLATOSHEARS 170 SD & 175 SD – ESD SAFESame as Platoshear 170 & 175, but with permanently static dissipative plastic grips which meet DOD-STD-1686 and MIL-B-81705, Type 2. (Not shown)
PLATOSHEAR 170 SMD – ESD SAFEFor use in restricted areas. The low profile nose and narrow head,combined with a nose width of less than .025" (0.6mm) per side enablescuts of SMD leads up to .020" (0.5mm) diameter with openings betweenleads as small as .028" (0.7mm). Includes unique SAF-T-LINK® featurefor greater operator safety.
PLATO BIG SHEAR 1755Cuts round and flat cable, co-ax, nickel, Kovar and other wire with aclean shearing cut that reduces cable cut-end distortion. And it islightweight, only 2.5 ounces (71g), significantly reducing operatorfatigue. It is 5.82 inches (148mm) in length.
473 LEAD FORMERForms standoffs in component leads.Meets ANSI (J-STD-001B)Form standoffs as close as .062" (1.6mm) from the component bodywith a single squeeze. An adjusting screw sets the radius and depthof the bend. The tool’s sturdy construction features a double-coilsteel return spring and plastic-dip vinyl handles that fit in the palm ofthe hand. Model 473 forms wire up to .030" (0.8mm) diameter.
Makes these forms and many more.
®
Platoshear Lead Cutters and Former
Plato PProducts, IInc. 18731 Railroad St., Industry, CA 91748, USA • (800) 423-4510 • (626) 965-8044 • Fax (626) 965-8960 • http://www.platoproducts.com • sales@platoproducts.com
Shear Cutting Principle
Shear cutting results in 50% reduced force necessary to cut metal,transmits less mechanical force to component,
extends tool life because ground blade edges “by-pass.”
Platoshear 175 w/ Safety Guard
.510"(13mm)
.589"(15mm)
5.15"(131mm)170
.510"(13mm)
.589"(15mm)
5.15"(131mm)175
Nose width.025" (.6mm)
per side
.290"(7.38mm)
.750"(19mm)
SAF-T-LINK®
170 SSMD
0.66"(17mm)
0.47"(12mm)
2.01"(51mm)
5.82"(148mm)
1755
0.55"(14mm)
1.7"(43mm)
5.11"(130mm)
473
ONE OF THE INDUSTRY’S MOST POPULAR LEAD CUTTERS! Assemblers love its effortless shearing action, comfort, light weight, and safety for electronics lead and wire cutting. Try a new experience in effortless lead cutting. Platoshear requires 50% less operator effort and has a longer cutting life than conventionalcutters because it shears rather than bites, and cushioned handles provide daylong comfort.Platoshear has a thin profile designed for those hard-to-get-at areas in electronic assembly where conventional cutters can’t reach.✓ Ergonomically designed. ✓ Reduces operator fatigue. ✓ Requires 50% less operator effort. ✓ Made in the U.S.A.
170 SSMD 175
Meets ANSI (J-STD-001B).
NEW!
5
Plato PProducts, IInc. 18731 Railroad St., Industry, CA 91748, USA • (800) 423-4510 • (626) 965-8044 • Fax (626) 965-8960 • http://www.platoproducts.com • sales@platoproducts.com
®
Plato® Precision Solder Pots
SP-500T, SP-150T, SP-600T & SP-750T
GENERAL PURPOSE ± 11°F (± 6°C)Plato General Purpose Solder Pots control temperature to ± 11°F (± 6°C) through the use of athermal timer switch with automatic correction for voltage fluctuations.Proven features include:✓ A three index position control switch with infinitely variable temperature control.✓ Safety heat shield ✓ Removable dross tray for easy cleaning ✓ Three-wire, grounded UL listed cord✓ 2.5" (64mm) diameter by 1.5" (38mm) deep crucible✓ Adjustable leveling feet.✓ Capacity: 2.0lbs. (1kg).✓ All parts are easily replaceable including the heating element and control switch.✓ Shipping Weight: 11lbs. (5kg). Replacement parts list and prices on request.
Model Input Wattage Temperature RangeSP-101 120VAC 350 500° to 975°F (525°C)SP-201 240VAC 350 500° to 975°F (525°C)SP-301 120VAC 500 500° to 1100°F (595°C)SP-401 240VAC 500 500° to 1100°F (595°C)
*Porcelain crucibles are also available as an option for all pots.
SP-101, SP-201, SP-301, SP-401 General
SP-500T & SP-150T
SP-600T & SP-750T
SP-101, SP-201, SP-301 & SP-401
EXCEEDS ANSI (J-STD-OO1B)PRECISION TEMPERATURE CONTROLLED ± 5°F (± 2.75°C)Plato’s Solder Pots exceed the requirements of military specifications ANSI (J-STD-001B). The pots control temperatures to ± 5°F (± 2.75°C) of a preselected settingfrom ambient to 925°F (496°C) and have an LCD temperature display.Standard features include:✓ A new solid state controller that limits transient voltage spiking to 2mV peak-to-peak, or less, for voltage
sensitive components.✓ A temperature preset switch to select the desired temperature.✓ An LCD that displays preset temperature and operating temperature.✓ Internal circuitry to compensate for incoming power fluctuations, power line circuit breaker. ✓ All metal construction for ESD protection.✓ Safety heat shield.✓ Removable dross tray for easy cleaning.✓ Three-wire, grounded UL listed cord.✓ An output jack for external temperature recorder or data logger.✓ Adjustable leveling feet. ✓ Porcelain crucible available (see below). SP-500T and SP-150T Additional Features: ✓ 2.5" (64mm) diameter by 1.5" (38mm) deep crucible.✓ Capacity: 2.0lbs. (1kg).✓ Shipping Weight: 12lbs. (5.4kg). SP-600T and SP-750T Additional Features:✓ Large capacity crucible, 4" (102mm) by 6" (152mm) by 4" (102mm) deep. ✓ Safety warm-up crucible cover. ✓ Capacity: 32lbs. (14kg).✓ Shipping Weight: 45lbs. (20kg). Replacement parts list and prices on request.
Model Input Wattage Temperature RangeSP-500T 120VAC 350 Ambient to 925°F (496°C)
* SP-150T 240VAC 350 Ambient to 925°F (496°C) SP-600T 120VAC 1000 Ambient to 750°F (399°C)
* SP-750T 240VAC 1000 Ambient to 750°F (399°C)
* SP-150T and SP-750T Display Temperature in Celsius.
PORCELAINIZED SOLDER POT CRUCIBLE OPTION*Plato’s porcelainized solder pot crucible is available as an option for each of its standard solder pots.✓ The porcelainized crucible is easy to clean and offers a long service life.✓ Solder will not adhere to the porcelainized surface, which allows for easier maintenance.✓ The non-reactive crucible will not rust and actively resists corrosion when used with activated fluxes and
chemicals.To oorder aany PPlato® solder ppot wwith pporcelainized ccrucible, aadd tthe lletter ““P” tto tthe ppartnumber. For eexample, SSP-5500T bbecomes SSP-5500TP.
*NEWOPTIONNAL PPORCELAINNIZEDCRUCIBLES• RReducess CCrrossssConntaaminnaationn• WWipess CCleaann
DROSS SKIMMER SP-1200
NEW!
Plato PProducts, IInc. 18731 Railroad St., Industry, CA 91748, USA • (800) 423-4510 • (626) 965-8044 • Fax (626) 965-8960 • http://www.platoproducts.com • sales@platoproducts.com
®
Plato® Vac-Kit Desoldering Stations
V-581 Vac-Kit Desoldering Station
CERTIFIED SPIKE-FREE DESOLDERING STATION WITH PULSE VACUUMMEETS AANSI ((J-SSTD-0001B)Features:✓ Plato’s unique controlled pulse, combined with high vacuum, does a clean job of
removing solder while maintaining stable tip temperature. Continuous vacuum systems can cool the tip below the melting
temperature of solder resulting in tip clogging and slower production.✓ Used by major aerospace contractors for desoldering voltage sensitive
devices.✓ Verifiable spike-free using the latest test techniques, 2mV peak-to-peak
limit on transient voltages.✓ Fully grounded.✓ 24V handpiece for operator safety.✓ 120V, 60Hz input. Operates on 85-130 psi (6-9bar) shop air.✓ See notes on this page for Quick-Cleaning Solder Collector Operation,
Long-Life Replacement Tips, and Optional Accessories.
V-985 Vac-Kit Spike-Free Desoldering
Quick-Cleaning Solder Collector with Heat-Insulated HandleA unique time-saving Vac-Kit feature is the convenient tempered glasssolder collector with heat-insulated handle. This allows for quickcleaning during desoldering by pulling back on the release and lifting thecollector away from the handpiece. The entire cleaning operation canbe done in several seconds with the Vac-Kit at operating temperature,thereby eliminating downtime.Long-Life Replacement TipsPlato long-life tips are iron plated copper, pre-tinned at the workingsurface. The interior solder path is a stainless steel tube that preventserosion by solder. Vac-Kit’s unique tapered seat construction affordsmaximum heat transfer and vacuum seal. Three tips are supplied witheach Vac-Kit.
VAC-KIT PRODUCTION DESOLDERINGSTATION WITH PULSE VACUUM MINIMIZES TIP CLOGGINGAND OPERATOR MAINTENANCE.Plato’s unique controlled pulse combined with high vacuum, does a clean thorough job ofremoving solder while maintaining stable tip temperature. Continuous vacuum systems cancool the tip below the melting temperature of solder resulting in tip clogging and slowerproduction. The Plato controlled pulse system minimizes tip clogging and operatormaintenance.Features:✓ Non-clogging solder path. Large-capacity, quick cleaning solder collector.✓ Lightweight, human-engineered handpiece with comfortable arm-to-work position.✓ Steady tip temperature.✓ Whisper-quiet operation. Operates on 85-130psi (6-9bar) shop air.✓ Snubber circuit provides RFI/EMI protection for voltage sensitive devices. ✓ Fully grounded.✓ High-efficiency vacuum transducer. High vacuum up to 24"Hg (600mm Hg, 81.3kPa).✓ Circuit breaker with reset button. Air pressure regulator. All solid state circuitry.Specifications:
MODEL INPUT VOLTAGEV-581 120VAC
General Information for V-581 & V-985:✓ All models operate on 85-130 psi (6-9bar)shop air.✓ Shipping Weight: 7lbs. (3.2kg).
Optional Accessories for V-581 & V-985:Air line hook-up kit and filter Part No. 01-9995Air line filter Part No. 01-9996Tip cleaning sponge Part No. CS-11Tip cleaning tool Part No. 01-5000 see page 13
Replacement Tips for V-581 & V-985: ( )= mmPLATO NO. L D1 D2VT-0025* .500"(12.7) .025"(0.6) .070"(1.8)VT-0033 .500"(12.7) .033"(0.8) .070"(1.8)VT-0040* .500"(12.7) .040"(1.0) .090"(2.3)VT-0050* .500"(12.7) .050"(1.3) .100"(2.5)VT-0060 .500"(12.7) .060"(1.5) .120"(3.0)VT-0090 .500"(12.7) .090"(2.3) .170"(4.3)
VT-1050 .750"(19.0) .050"(1.3) .100"(2.5)
Tip drawings are actual size.Premium Quality for Long Life. Stainless steel tube prevents erosion by solder. Heavy iron plate at workingsurfaces. Tinned for good heat transfer. Threads and body immunized.
*Tips supplied with Vac-Kit.
6
7
Plato PProducts, IInc. 18731 Railroad St., Industry, CA 91748, USA • (800) 423-4510 • (626) 965-8044 • Fax (626) 965-8960 • http://www.platoproducts.com • sales@platoproducts.com
®
Plato®-Wick Desoldering Braid
PLATO®-WWICK XXL PPREMIUM DDESOLDERING BBRAID CCUTSDESOLDERING TTIME UUP TTO 550% CCOMPARED TTOCONVENTIONAL WWICK.
Plato®-Wick XL is designed for quick and safe desoldering of printed circuit boardcomponents, terminals, lugs, and wire wrap pins, and removing bridges, icicles andunwanted solder.
✓ Quick, clean pick-up because the fine gauge copper braid transfers heat to the connection faster, greatly reducing desoldering time.✓ Leaves minimal residue therefore minimizing the need for post cleaning.✓ The design of Plato-Wick XL absorbs a greater volume of solder than conventional wick and it works at a lower temperature because of its reduced mass.✓ The combination of fast action and lower temperature results in greater operator comfort and reduced risk of heat damage to components.✓ Pure white rosin flux meets MIL-F-14256D, Type R.✓ Color-coded containers.✓ Sizes for all applications.
Plato®-Wick XL
Plato®-Wick XLNC
ESD BobbinsPlato-Wick XL5' (1.5M) Rolls
Part No. Width Color Code
XL 1-5 .030" (0.8mm) WhiteXL 2-5 .060" (1.5mm) YellowXL 3-5 .085" (2.15mm) GreenXL 4-5 .100" (2.5mm) BlueXL 5-5 .145" (3.7mm) Brown
Packaged 10 rolls per pack.
ESD BobbinsPlato-Wick XL
10' (3.0M) RollsPart No. Width Color Code
XL 1-10 .030" (0.8mm) WhiteXL 2-10 .060" (1.5mm) YellowXL 3-10 .085" (2.15mm) GreenXL 4-10 .100" (2.5mm) BlueXL 5-10 .145" (3.7mm) Brown
Packaged 10 rolls per pack.
Plato-Wick XL25' (7.6M) Rolls
Part No. Width Color Code
XL 1-25 .030" (0.8mm) WhiteXL 2-25 .060" (1.5mm) YellowXL 3-25 .085" (2.15mm) GreenXL 4-25 .100" (2.5mm) BlueXL 5-25 .145" (3.7mm) Brown
Packaged in single rolls.
Plato-Wick XL100' (30.5M) Rolls
Part No. Width Color Code
XL 1-100 .030" (0.8mm) WhiteXL 2-100 .060" (1.5mm) YellowXL 3-100 .085" (2.15mm) GreenXL 4-100 .100" (2.5mm) BlueXL 5-100 .145" (3.7mm) Brown
Packaged in single rolls.
Plato-Wick XL500' (152.5M) Rolls
Part No. Width Color Code
XL 1-500 .030" (0.8mm) WhiteXL 2-500 .060" (1.5mm) YellowXL 3-500 .085" (2.15mm) GreenXL 4-500 .100" (2.5mm) BlueXL 5-500 .145" (3.7mm) Brown
Packaged in single rolls.
Fast Wicking Action – No Post Cleaning Required – ESD SafePlato’s no clean wick is specially formulated to improve wicking action andremove solder faster than conventional wick. Any remaining residue is halide freeand non-conductive; post cleaning is generally not required. Since Plato®- WickXLNC absorbs solder faster, dwell time per solder joint is reduced, shortening thetime necessary for the operator to complete the task which limits risk of heatdamage to the product being repaired.New Plato®-Wick XLNC no clean wick is the operator’s #1 choice. Competitivelypriced. Available in 5' (1.5 M) and 10' (3.0 M) ESD safe spools, vacuum sealed inpacks of 10 to insure freshness. Samples available.✓ Fast Wicking Action✓ Requires No Post Cleaning✓ Vacuum Sealed✓ ESD Safe Bobbins✓ Meets Bellcore TR-NWT-000078 and IPC-SF-818 Specifications
Plato®-Wick XLNC – No Clean Wick
Plato-Wick No Clean 5' (1.5 M) ESD BobbinsPart No. Width Color CodeXLNC 1-5 .030" (0.8 mm) WhiteXLNC 2-5 .060" (1.5 mm) YellowXLNC 3-5 .085" (2.15 mm) GreenXLNC 4-5 .100" (2.5 mm) BlueXLNC 5-5 .145" (3.7 mm) Brown
Plato-Wick No Clean 10' (3.0 M) ESD BobbinsPart No. Width Color CodeXLNC 1-10 .030" (0.8 mm) WhiteXLNC 2-10 .060" (1.5 mm) YellowXLNC 3-10 .085" (2.15 mm) GreenXLNC 4-10 .100" (2.5 mm) BlueXLNC 5-10 .145" (3.7 mm) Brown
8
PLATO®-STAT PERMANENTLY STATICDISSIPATIVE PRODUCTS PROVIDEELECTROSTATICDISCHARGEPROTECTION.
Meets ANSI(J-STD-001B).
✓ Protects voltage sensitive devices from static discharge.✓ Meets the requirements of DOD-STD-1686 for containers.✓ Physical characteristics comply with MIL-B-81705, Type 2.✓ Made of permanently static dissipative plastic material.
Part No. Description Use
SF-01 Flux dispenser, 2oz. (59ml), Dispense water base .010" (.25mm) ID capillary, fluxes, low viscosity 1" (25mm) long. liquids.
SF-02 Flux dispenser, 2oz. (59ml), Dispense rosin fluxes, .020" (.5mm) ID capillary, lubricants, cleaners, 1" (25mm) long. adhesives.
SF-B2HS Scrub brush for spot cleaning, Soft to medium stiffness,2oz. (59ml), Brush is durable and works wellsoft, natural horse hair. for flux removal and
general cleaning.
SF-B2HH Scrub brush for spot cleaning, Medium to stiff bristle2oz. (59ml), Brush is that works well for stiff, natural hog bristle. removing difficult, sticky,
crusty, or viscousmaterials.
SF-4 Solvent Dispenser Sleeve, Fits over solvent4oz. (118ml). dispenser.
SF-6 Solvent Dispenser Sleeve, Fits over solvent 6oz. (177ml). dispenser.
SF-8 Solvent Dispenser Sleeve, Fits over solvent 8oz. (237ml). dispenser.
SF-401 Bottle and spout, 4oz. (118ml). Dispense liquids.
SF-801 Bottle and spout, 8oz. (237ml). Dispense liquids.
SF-1601 Bottle and spout, 16oz. (473ml). Dispense liquids.
SF-250 Bottle and nozzle, 8oz. (237ml). Dispense liquids.
170SMD Platoshear SMD Lead Cutters Cuts .020" (.5mm) leads. for restricted areas With minimum access
space of .028" (.7mm) per side.
170SD Platoshear Lead Cutters with Flush cut leads as large static dissipative grips. as 18 AWG (.04"/1mm).
175SD Platoshear Lead Cutters with Flush cut leads as largestatic dissipative grips and as 18 AWG (.04"/1mm).
Plato PProducts, IInc. 18731 Railroad St., Industry, CA 91748, USA • (800) 423-4510 • (626) 965-8044 • Fax (626) 965-8960 • http://www.platoproducts.com • sales@platoproducts.com
®
Plato®-Stat Products
Permanently Static Dissipative Products
PLATO®-STAT PERMANENTLY STATIC DISSIPATIVE PLASTICElectrical PropertiesSurface Resistivity: 1 x 107 - 1 x 109 ohm/sqVolume Resistivity: 1 x 107 - 1 x 109 ohm/cm
Static Decay (Cond. 24 hrs. @ 72°F, 15% RH)5 KV to 0.5 KV (NFPA 56A): less than 0.02 sec.5 KV to 0.0 KV (FTS 101/4046): less than 0.02 sec.
Triboelectric Charge: none
Solvent ResistanceHexane: 1.04 x 10-1 g/m2 hydrocarbonAcetone: 2.34 x 10-1 g/m2 hydrocarbonIPA (Isopropyl Alcohol): 5.0 x 10-3 g/m2 hydrocarbon
Clean Room Particulate Generation5.0 micron particles: 152 / ft3 air/max0.5 micron particles: 31 / ft3 air/maxContact Contamination: 2 micrograms / 25 cm2
hydrocarbonSilicones: noneSulfides: noneChlorides: noneMetallization: noneTertiary Amines: none
Physical CharacteristicsMilitary Specifications: complies with MIL-B-81705,
Type 2Color: grayClean Room Criteria: meets Class 10,000
The above product information was supplied by the manufacturer of the staticdissipative plastic. Further information is available upon request.
"Check for compatibility
of liquids used. Test samples are
available at no charge."
Plato PProducts, IInc. 18731 Railroad St., Industry, CA 91748, USA • (800) 423-4510 • (626) 965-8044 • Fax (626) 965-8960 • http://www.platoproducts.com • sales@platoproducts.com
®
Plato® Liquid Dispensers 9
Flux and Liquid DispensersUNIQUE, NO LEAK DESIGN!*Plato’s new POS-A-LOC® leak proof liquid dispensers offer a convenientway to dispense specific amounts of a variety of liquids without dripping,spilling or waste.
ESD Safe “NO LEAK” Plato Flux Bottles. These bottles have all thefeatures of our standard flux bottles, and meet the requirements of ANSI(J-STD-001B).
Plato No. Capillary ID Size TypeFD-006 .006" (.15mm) 2oz. (59ml) DispenserFD-2 .020" (.5mm) 2oz. (59ml) DispenserSF-02 .020" (.5mm) 2oz. (59ml) Dispenser, ESD SafeFD-21 .010" (.25mm) 2oz. (59ml) DispenserSF-01 .010" (.25mm) 2oz. (59ml) Dispenser, ESD SafeFD-100 .005"(.13)-.035"(.90) 2oz. (59ml) Cut-to-Size DispenserFDC-1 Replacement Cap Assembly to fit FD-100The FD-100 Cut-to-Size Flux Dispenser is aconvenient method of dispensing liquids. TheCut-to-Size dispenser lets you decide whichtip opening best suits your needs. Just cut tothe correct needle opening and you are readyto dispense any liquid.The BC-250 is an inexpensive way to wetsponges and dispense liquids at the workbench without waste. It is a polyethylenebottle, screw cap, and dispensing tube with8oz. (237ml) capacity.
The SF-250 is the BC-250 bottle encased in permanently static dissipativeplastic that provides electrostatic discharge protection to meet DOD-STD-1686 and MIL-B-81705, Type 2.Plato® 2 oz. Liquid Dispensers are packed 10 per box.* Patent Pending
Plato®-Brush Scrub BottleHandy 2oz. (59ml) polyethylene, solvent dispenser with scrub brush provides aninexpensive method to spot clean PCB assemblies.
ApplicatorPlato No. Brush Type General ApplicationSB-2N Nylon Bristle Medium stiffness, for general flux removal.SF-B2HS Soft, Natural Soft to medium stiffness, durable and
Horse Hair works well for flux removal and generalcleaning. Combination of static dissipative jacket and natural material meets ANSI (J-STD-001B).
SF-B2HH Stiff, Natural Medium to stiff bristle that works well for Hog Bristle removing difficult, sticky, crusty, or viscous
materials. Combination of static dissipativejacket and natural material meets ANSI (J-STD-001B).
Plato®-Brush Scrub Bottles are packed 10 per box.
Stainless Steel Replacement Needles* Flexible Teflon Needles*1" (25.4mm) Long 1.5" (38.1mm) Long
Plato No. Capillary ID Hub Color Plato No. Capillary IDFDN-006* .006" (.15mm) Lavender FDNT-022 .022" (.56mm)FDN-010 .010" (.25mm) Peach FDNT-042 .042" (1.07mm)FDN-020 .020" (.50mm) BlackFDN-032 .032" (.81mm) Brown * All needles packaged 10 perFDN-038 .038" (.97mm) Pink pack.FDN-053 .053" (1.35mm) PurpleFDN-066 .066" (1.68mm) Dark Green* FDN-006 has 0.5" (13mm) needle length.
SPECIAL NOTICE TO ALL “NO CLEAN” FLUX
USERS!“No Clean” fluxes have a low viscosity. Plato has introduced astainless steel needle with a .006" ID which is ideal to dispense preciseamounts of “No Clean” flux. Order Plato’s FD-006.
MEETS ANSI(J-STD-001B)
Pos-A-Loc®
No Leak Assembly
SB-2N
Replacement Brush AssembliesPlato No. Brush Type All replacement brushes are packagedSB-N Nylon Bristle 10 per pack and come assembled andSB-HS Soft Horse Hair ready to attach to your existing SB-HH Stiff Hog Bristle Plato®- Brush Scrub Bottle.
FD-100CAP
MEETS ANSI(J-STD-001B)
SF-02 SF-01 SF-250 BC-250 FD-21 FD-2
Plato PProducts, IInc. 18731 Railroad St., Industry, CA 91748, USA • (800) 423-4510 • (626) 965-8044 • Fax (626) 965-8960 • http://www.platoproducts.com • sales@platoproducts.com
®
Plato® Premium Tip Cleaning Sponges
Plato PlatoPremium Price SaverSponge No. Sponge No.(Expands to (Expands to Dimensions1" (26mm) 5/8" (16mm) Original Manufacturer’s No. Also Used With Inches ( ) = mm
CS-1 CS-1/625 Weller® SP-60, Pace® 4021-0005, Ungar® 9901. 1.5" x 2.12" (38.1 x 53.8)CS-5 American Beauty® 480S, Desco® 4101, Lerloy 65N. Lerloy #50 2.63" x 3.2" (66.8 x 81.3)
(Shipped full size, 4/pack.) American Beauty #480CS-7 (Shipped full size, 7/pack.) Plato® TW-555 or TWH-444 2.25" dia. (57.2 dia.)CS-9 CS-9/625 Hexacon® 8101, 8101C, 8121 or 8121C. 890, 890-30, 892, 892-30 3.5" x 4.5" (89 x 114.3)CS-11 CS-11/625 Plato® Vac-Kits and Hot Grips 2" x 2.63" (50.8 x 66.8)CS-12 CS-12/625 Metcal® STSS-YS1 WSI Workstand 1.7" x 2.7" (43.2 x 68.7)CS-14 CS-14/625 Weller® 52241999 Weller® WECP Iron 2.15" x 2.75" (54.6 x 70)
WTCP, EC-2002CS-14M CS-14M/625 Same as CS-14 but with multiple holes. 2.15" x 2.75" (54.6 x 70)CS-17 CS-17/625 Plato® Sponge Sheet (1/pack, you cut to size) 8.5" x 17" (216 x 432)CS-33 CS-33/625 Weller® EC-205 MF20/21, 896MS, 892MS, 2.7" x 4.5" (69.85 x 114.3)CS-36 CS-36/625 Hexacon® 8141, 8141C Hexacon® 892A Holder, MV15/16, 2.25" x 3.5" (57.2 x 89)CS-40 CS-40/625 Edsyn Loner® RS-199 Holder SH-230 2.5" x 3.25" (63.5 x 82.6)CS-43 CS-43/625 Hakko® 926-029B Holder 926, 700 1.75" x 4.25" (44.5 x 101.6)CS-44 CS-44/625 Hakko® 609-029,A-1042,Weller® TC-205, Ungar® 9904. Hakko® Holder 631, 632, 607, 2.7" x 2.7" (68.6 x 68.6)
609, C-100CS-44M CS-44M/625 Same as CS-44 but with multiple holes. 2.7" x 2.7" (68.6 x 68.6)CS-47 CS-47/625 Metcal® STSS-YS3, Ungar® 455, UTC234. Metcal® STSS-WS4, STDS-WS3, 2.1" x 3.2" (53.3 x 81.3)
STSS-WS5All sponges are shipped compressed in packs of 10 unless otherwise noted. All dimensions are measured in the dry, compressedstate and are subject to manufacturing tolerances and sponge expansion tolerances.
10
Tip wiping sponges serve two main functions: to removesurface oxides which form on the tip, and to wipe theexcess solder from the tip, exposing the tip point definitionand offering the operator a well defined tip with which tosolder.
Plato premium sponges are manufactured with all naturalmaterials to exacting specifications. Pure cellulose (a woodderivative) is used. Cellulose is selected for its ability to holdmany times its weight in water and for its resistance toabrasion and tearing forces which occur during the tip wipingprocess.
Plato premium sponges are designed to expand to athickness of 1" (26mm) which will hold water for longperiods of time and meet ANSI (J-STD-001B) for lowsulphur content and fine porosity.
CAUTION: Many economy sponges are manufactured with man-made fibers and materials typically found in non-industrial (household)type sponges. These sponges contain colorings, sizings, plasticizers,stiffeners, and other contaminants which will promote detinning and shorttip life. SYNTHETIC SPONGES ARE NOT RECOMMENDED FOR USEAS TIP CLEANING SPONGES.
Use only Plato pure cellulose sponges to aid in keeping yoursolder tips well tinned and to extend tip life.
Other ssponge ssizes aand tthicknesses aareavailable tto mmeet yyour rrequirements. CCall fforquote.
PPllaattoo ““PPrriiccee SSaavveerr”” ssppoonnggeess eexxppaanndd ttoo 55//88"" ((1166mmmm)) aanndd ooffffeerr tthhee ssaammee qquuaalliittyy aass oouurr ““PPrreemmiiuumm”” ssppoonnggeess aatt aa ffrraaccttiioonn ooff tthhee
ccoosstt..
NEW!
Plato PProducts, IInc. 18731 Railroad St., Industry, CA 91748, USA • (800) 423-4510 • (626) 965-8044 • Fax (626) 965-8960 • http://www.platoproducts.com • sales@platoproducts.com
®
Plato® Soldering Accessories
Plato® Tip-Tin TT-95 Tip Tinner/Cleaner – LEAD FREE
You’ll save money on soldering iron tips because you can use them longer. Theinexpensive Plato® Polishing Bar restores detinned tips for additional service.Normally, detinned tips (those unable to hold solder) are discarded. If the tipsare not pitted or worn, buffing with the Plato® Polishing Bar will clean the tips andrestore new life.
Tip Polishing Bar AB-3
Plato® Soldering IIron HHolders aand RRotating TTip WWipers are designed sothe soldering iron can be removed from the holder and the tip wiped on the sponge in onecontinuous time-saving motion. Heavy double spiral wire construction protects theoperator and provides an inner spiral to retain the soldering iron securely. A bell shapedmouth guides the iron when it is being placed in the holder. Other features include heavyduty plated construction and non-skid feet. Holders fit most irons to 60 watt size.
Patented rotating tip wipers clean tips — without detinning — to assure clean, uniformsolder joints. Rotation of the sponges during cleaning causes residues to drop into thebase, keeping the sponges clean. Rotation also keeps the sponges uniformly wetted andprevents cratering and gouging. The heavy non-corrosive, non-skid porcelain baseprovides a large water reservoir and eliminates rusting and corrosion — a severe problemwith metal bases. CS-7 Replacement Sponge Sets fit all tip wipers shown.
Make yyour ssoldering aarea eefficient aand ssafe wwith Plato® Soldering IIron HHolders aand TTip WWipers.
Soldering Iron Holders & Tip Wipers TWH-444 H-100
TW-555TWH-444-2
AB-3 Tip Polishing Bar
Plato TTip-TTin: TTip TTinner // CCleaner –– LLead FFree
Plato’s LEAD FREE Tip Tinner TT-95 is a fast, efficient, and safe means of re-tinning tips. This thermally-stable compound is residue-free, ESD and environmentallysafe. A well-tinned soldering tip improves operator performance and satisfaction. Plato’sTip-Tin provides improved cleaning and re-tinning of highly oxidized soldering iron tipssafely and efficiently.
✓ Lead Free ✓ Easy to Use ✓ ESD Safe✓ Fast Response ✓ Environmentally Safe
Just wipe the oxidized soldering tip at normal soldering temperature into the tip tinnerfor a few seconds until the bright tinning surrounds the working end of the tip, thenwipe the excess residue on a wet cellulose sponge - it’s that easy! Plato Tip-Tin TT-95is sealed in packs of 10. Samples available. Tip-TTin TTT-995 TTip TTinner/Cleaner
Plato® Desoldering Tip Cleaning Tool No. 01-5000This handy maintenance tool is used to remove unwanted solder and flux “build-up” fromdesoldering tip ID’s and from solder collector paths.Just select the proper diameter rod from the Plato® tool and push out any unwanted looseparticles or solder from the desolder tip or solder collector path. Proper daily maintenance ofall desoldering equipment minimizes premature tip clogging and will ensure improvedperformance.This tool may be used on all popular desoldering equipment such as Pace®, Weller®, Plato®,Air-Vac®, APE®, Hakko® and many others. The Plato® tool contains various tip cleaners from.020" (.5mm) to .065" (1.65mm) diameter.
11
NEW!
12
Plato PProducts, IInc. 18731 Railroad St., Industry, CA 91748, USA • (800) 423-4510 • (626) 965-8044 • Fax (626) 965-8960 • http://www.platoproducts.com • sales@platoproducts.com
®
Plato® Precision Tweezers
Plato® Plus Precision Tweezers with Exclusive Qintel® Alloy
Plato® 4-Star Precision Tweezers
Plato® Precision Cutting Tweezer Plato’s Cutting Tweezer will cut wire, leads andother materials in restricted spaces. This tweezer is made of the finest stainlesssteel which assures the best combination ofanti-magnetic and acid resistant characteristics.
ExclusiveQintel®Alloy Tips
TZF-414-15
Style Part No. Length Tweezer Tip Drawing Style Part No. Length Tweezer Tip Drawing
1 TZQ-200-1 4.75" (121) 5A TZQ-206-5A 4.75" (121)General use, strong blades with Fine strong points with angle for visibility.fine points.
2 TZQ-201-2 4.75" (121) 5F TZQ-207-5F 4.25" (108)General use, blades taper from body, Extra fine points with long, regular beveled points. sharply tapered blades.
3 TZQ-202-3 4.75" (121)Assembly work, fine round points. 7 TZQ-208-7 4.5" (114)
Assembly work, curved super 3C TZQ-203-3C 4.25" (108) fine rounded points.
Assembly work, very fine round points like No. 3 but shorter.
4 TZQ-204-4 4.25" (108) F TZQ-209-F 4.75" (121)Extra fine work, blades taper sharply Rounded flat tips for general use.to fine rounded points.
5 TZQ-205-5 4.25" (108) SS TZQ-210-SS 5.4" (137)Extra fine work, long blades taper sharply to super fine round points. Extra long tweezer with fine points.
Plato Plus® Tweezers provide anew level of shape retention,sensitivity and alignment becauseof the exclusive Qintel® Alloy Tipsthat are welded to the stainlesssteel body. Plato Plus® Tweezersare more durable than othertweezers and have a closurepressure designed for day-longuser comfort and efficiency.Plato Plus® Tweezers are anti-magnetic and have superior acidresistance.Plato Plus® Tweezers flex andreturn to their original shapebecause of the exclusive Qintel®Alloy Tips welded to the stainlesssteel body.
Style Part No. Length Tweezers Tip Drawing Style Part No. Length Tweezers Tip Drawing
1 TZF-400-1 4.75" (121) 5F TZF-407-5F 4.25" (108)General use, strong blades Extra fine points with long, with fine points. sharply tapered blades.
2 TZF-401-2 4.75" (121) 7 TZF-408-7 4.5" (114)General use, blades taper from Assembly work, curved super fine pts.body, regular beveled points.
3 TZF-402-3 4.75" (121) F TZF-409-F 4.75" (121)Assembly work, fine round points. Rounded flat tips for general use.
3C TZF-403-3C 4.25" (108) SS TZF-410-SS 5.38" (137)Assembly work, very fine round Extra long tweezer with fine points.points like No. 3 but shorter.
4 TZF-404-4 4.25" (108) OO TZF-411-OO 4.75" (121)Extra fine work, blades taper Heavy duty, strong blades, tapered.sharply to fine rounded points.
5 TZF-405-5 4.25" (108) AA TZF-412-AA 5" (127)Extra fine work, long blades taper Same as OO but longer.sharply to super fine round points.
5A TZF-406-5A 4.75" (121) MM TZF-413-MM 5" (127)Fine strong points with angle for visibility. Assembly tweezer, extra long blades, fine beveled points.
Plato® 4-Star Precision Tweezersare Swiss made and designed foruse in handling, assembling,adjustment and repair of electronicand other micro-miniature partswhere firm yet delicate touch isrequired.
The stainless steel used in Plato®
4-Star Tweezers provides the bestcombination of anti-magnetic andacid resistant characteristics.Carefully controlled heat treatmentassures durability of point and pointalignment. And, all tweezers havea non-glare satin brushed finish.
13
STAINLESS STEEL ANTI-MAGNETIC ACID RESISTANT MADE IN SWITZERLAND
FOAM CUSHION GRIPS OFFER COMFORT & CONTROLNEW!
◆ IMPROVES OPERATOR CONTROL
◆ ERGONOMICALLY DESIGNED
◆ REDUCES FATIGUE
◆ LIGHTWEIGHT – WELL BALANCED
◆ CLEAN ROOM SAFE – ESD SAFE
®
Style 1
Style 3C
Style 5
Style 2A
PART NUMBER TZS-500-1
PART NUMBER TZS-501-2A
PART NUMBER TZS-502-3C
PART NUMBER TZS-505-5
Style 00
Style AA
Style 7
Style 15A-GW
PART NUMBER TZS-512-AA
PART NUMBER TZS-508-7
PART NUMBER TZS-514-AGW
PART NUMBER TZS-511-00
SofTweezer ™
Plato PProducts, IInc. 18731 Railroad St., Industry, CA 91748, USA • (800) 423-4510 • (626) 965-8044 • Fax (626) 965-8960 • http://www.platoproducts.com • sales@platoproducts.com
14
Be sure to add temperature indicating number to Plato part number when ordering Plato® C-Tips.®
Use chart below, completing the part number by adding as the final digit one of thefollowing numbers: 6 (600°F/315°C) 7.5 (750°F/399°C) 9 (900°F/480°C)7 (700°F/370°C) 8 (800°F/425°C)
ATTENTION “NO CLEAN” FLUX USERS: The Plato 7.5 (750°F/399°C)temperature sensor is available on all C-series tips. The use of no-clean fluxes hasintroduced the risk of premature detinning of solder tips when exceeding temperatures of750°F/399°C. To maximize your tip life, use Plato 7.5 Temperature Sensor when using no-clean fluxes and substantially reduce your risk of premature detinned tips.
Indicated temperature ranges are nominal and will vary according to style of tip, conditionof iron, manner of use, and other variables. All dimensions are shown before tinning andare subject to manufacturing tolerances.All points are 1/32" (0.8) thick unless otherwise noted. Tip samples available. Custom tip designs on request. ( ) = mm
Plato PProducts, IInc. 18731 Railroad St., Industry, CA 91748, USA • (800) 423-4510 • (626) 965-8044 • Fax (626) 965-8960 • http://www.platoproducts.com • sales@platoproducts.com
®
Weller® Plato® Tip
PTA
PTB
PTC
PTD
PTE
PTF
PTH
PTJ
PTK
PTL
PTM
PTO
Plato® Tips to fit Weller® WTCPL, WTCPN, WTCPR, WTCPS, and WTCPT Soldering Stations with TC201T Soldering Iron Handpiece
Tip drawings are actual size.Tip drawings are actual size. Weller® Plato® Tip
PTP
PTQ
PTR
---
PTS
PTT
PTX
PTZ
PTAA
PTBB
PTCC
PTDD
---
PTMX
---
NEW
Plato PProducts, IInc. 18731 Railroad St., Industry, CA 91748, USA • (800) 423-4510 • (626) 965-8044 • Fax (626) 965-8960 • http://www.platoproducts.com • sales@platoproducts.com
® Plato® Tips to fit Weller® Stations EC-1002, EC-2002, MC-5001, WCC-100,WTL-1000, DTL-1000, DEC-1000 used with EC1201A, EC-1201AFE,
EX1201AFE & WCC-101 Soldering Iron Handpiece
Weller® Plato® Tip
ETR
---
ETS
ETT
ETBS
ETCS
ETDS
---
ETAA
ETBB
ETCC
ETDD
---
ET-MX
---
Weller® Plato® Tip
ETA
ETB
ETC
ETD
---
ETH
ETJ
ETK
ETL
ETM
ETO
ETP
ET-JL
ET-SMD 2.5mm
ET-SMD 3.8mm
Tip drawings are actual size.Tip drawings are actual size.
15
The interior surfaces of these tips are protected to prevent adhesion to the sensor. Alldimensions are shown before tinning and are subject to manufacturing tolerances.All points are 1/32" (0.8) thick unless otherwise noted. Tip samples available. Custom tip designs on request. ( ) = mm
NEW
NEW
NEWNEW
16
Plato PProducts, IInc. 18731 Railroad St., Industry, CA 91748, USA • (800) 423-4510 • (626) 965-8044 • Fax (626) 965-8960 • http://www.platoproducts.com • sales@platoproducts.com
® Plato® Tips to fit Weller® WLC-100, WP-25, WP-30, WP-35 Soldering Irons
® Plato® Tips to fit Weller® MC-5001, EC-1002, EC-2002, WTL1000-2, DEC-1001, DTL-1000 Soldering Stations
used with EC1302A Soldering Iron Handpiece
Weller® Plato® Plato® Tip
EPH101 RX-4762
EPH102 RX-402
EPH103 RX-513
EPH104 RX-404
EPH105 RX-515
EPH106 RX-306
EPH107 RX-307
EPH109 RX-409
EPH110 RX-401
EPH111 RX-4764
EPH112 RX-4763
--- RX-5567
--- RX-5568
The interior surfaces of these tips are protectedto prevent adhesion to the sensor.
All points are 1/32" (0.8) thick unless otherwisenoted. ( ) = mm
Tip samples are available. Custom tip designs on request.
All dimensions are shown before tinning and aresubject to manufacturing tolerances.
Tip drawings are actual size.
Weller® Plato® Plato® Tip
ST-1 44-3870
ST-2 44-3871
ST-3 44-3872
ST-4 44-1312
ST-6 44-3873
ST-7 44-8182
ST-8 41-1313
All points are 1/32" (0.8) thick unless otherwisenoted. ( ) = mm
Tip samples are available. Custom tip designs on request.
All dimensions are shown before tinning and aresubject to manufacturing tolerances.
Tip drawings are actual size.
Plato PProducts, IInc. 18731 Railroad St., Industry, CA 91748, USA • (800) 423-4510 • (626) 965-8044 • Fax (626) 965-8960 • http://www.platoproducts.com • sales@platoproducts.com
Specify temperature indicating number.Complete the Plato® part number by adding asthe final digit one of the following numbers:
6 (600°F/315°C) 8 (800°F/425°C)7 (700°F/370°C) 9 (900°F/480°C)
All points are 1/32"(0.8) thick unless otherwisenoted. ( ) = mm
Tip samples are available. Custom tip designson request. All dimensions are shown beforetinning and are subject to manufacturingtolerances.
Indicated temperature ranges are nominal andwill vary according to the style of tip, condition ofiron, manner of use, and other variables.
®
Weller® Plato® Plato® Tip
CT5A 4C-3241
CT5B 4C-3242
CT5C 4C-3243
CT5D 4C-3244
CT5E 4C-1080
Plato® Tips to fit Weller® W60P Soldering Irons
Tip drawings are actual size.
17
® Plato® Tips to fit Weller® W100PG Soldering Irons
Weller® Plato® Plato® Tip
CT6C 6C-3219
CT6D 6C-3220
CT6E 6C-3221
CT6F 6C-1083
Tip drawings are actual size.
Specify temperature indicating number.Complete the Plato® part number byadding as the final digit one of thefollowing numbers:
6 (600°F/315°C) 8 (800°F/425°C)7 (700°F/370°C) 9 (900°F/480°C)
Indicated temperature ranges are nominaland will vary according to the style of tip,condition of iron, manner of use, andother variables.
All points are 1/16" (1.6) thick unlessotherwise noted. ( ) = mm
All dimensions are shown before tinningand are subject to manufacturingtolerances.
Plato PProducts, IInc. 18731 Railroad St., Industry, CA 91748, USA • (800) 423-4510 • (626) 965-8044 • Fax (626) 965-8960 • http://www.platoproducts.com • sales@platoproducts.com
Weller® Plato® Plato® Tip
MPT-1 DX-4771
MPT-1S DX-4814
MPT-4 DX-5590
— DX-5688
— DX-2727
MPT-6 DX-1500
MPT-A DX-2684
MPT-B DX-2726
MPT-H DX-2683
MPT-HX DX-2987
— DX-4977
— DX-5550
MT-GW DX-5551
— DX-0600
MT-JL DX-0601
All points are 1/32" (0.8) thickunless otherwise noted. ( ) = mm
Tip samples are available. Custom tip designs on request.
All dimensions are shown beforetinning and are subject tomanufacturing tolerances.
® Plato® Tips to fit Weller® Micro-Soldering Pencil MLR 20, MPR 30
Tip drawings are actual size.
18
Plato PProducts, IInc. 18731 Railroad St., Industry, CA 91748, USA • (800) 423-4510 • (626) 965-8044 • Fax (626) 965-8960 • http://www.platoproducts.com • sales@platoproducts.com
19® Plato® Tips to fit Weller/Ungar 9900AS,
2110AS and UTC-Series Soldering Stations
Weller/Ungar® Plato®* Plato® Tip Tip drawings are actual size.
9010 UC-8801
9011 UC-7001
9012 UC-6100
9013 UC-7002
9014 UC-7003
9015 UC-6101
9016 UC-6110
9017 UC-6102
9018 UC-6103
9019 UC-7004
9050 UC-8802
9051 UC-6104
9052 UC-7005
UC-8801
.015" (0.4)
UC-7002
.065" (1.7)
UC-7001
.035" (0.9)
UC-7003
.030" (0.8)
UC-7004
.030" (0.8)
UC-8802
.020" (0.5)
UC-7005
.030" (0.8)
UC-6100
.050" (1.3)
.015" (0.4)
UC-6101
.065" (1.7)
.020" (0.5)
UC-6110
.090" (2.3)
.015" (0.4)
UC-6102
.030" (0.8)
.020" (0.5)
UC-6103
.050" (1.3)
.025" (0.6)
UC-6104
.120" (3.0)
.025" (0.6)
( ) = mm
Tip samples are available. Custom tip designs on request.
All dimensions are shown beforetinning and are subject tomanufacturing tolerances.
Ungar P/N 9037 or 2108S Tip Retainer Assembly Required
® Plato® High Capacity Tips to fit Weller/Ungar 9900AS,2110AS and UTC-Series Soldering Stations
Weller/Ungar® Plato®* Plato® Tip Tip drawings are actual size.
9056 UC-8803
9057 UC-6105
9058 UC-6106
9059 UC-6107
9060 UC-6108
9061 UC-6109
UC-8803
.025" (0.6)
UC-6105
.040" (1.0)
.025" (0.6)
UC-6106
.050" (1.3)
.030" (0.8)
UC-6107
.060" (1.5)
.035" (0.9)
UC-6108
.100" (2.5)
.030" (0.8)
UC-6109
.135" (3.4)
.050" (1.3)
( ) = mm
Tip samples are available. Custom tip designs on request.
All dimensions are shown beforetinning and are subject tomanufacturing tolerances.
Ungar P/N 9919 or 2106TTip Retainer Assembly Required
20®
All points are 1/32" (0.8) thick unless otherwise noted. ( ) = mm
Tip samples are available. Custom tip designs on request.
All dimensions are shown beforetinning and are subject tomanufacturing tolerances.
Plato® Tips to fit Hakko® 702, 703, 703B, 926, 927, 928, 933, 936, 937Soldering Stations with Handpiece M926, 900M or 907 ESD, and
O.K. Industries SA1000 Station with SAI-640 Handpiece
Tip drawings are actual size.Hakko® Plato® Plato® Tip
900M-T-1C HS-5701
900M-T-1.5-CF HS-5861
900M-T-2C HS-5702
900M-T-3C HS-5703
900M-T-4C HS-5875
900M-T-0.2RB HS-4791
900M-T-0.5C HS-5715
900M-T-0.8C HS-5716
900M-T-0.8D HS-2863
900M-T-1.2D HS-2796900M-T-S1
900M-T-1.6D HS-2751
900M-T-1.8H HS-0926
900M-T-2.4D HS-2752
900M-T-3.2D HS-2753
900M-T-1.2LD HS-6030
900M-T-2LD HS-6092
900M-T-3.2LD HS-6093
900M-T-B HS-4785
— HS-8179
900M-T-H HS-0925
Plato PProducts, IInc. 18731 Railroad St., Industry, CA 91748, USA • (800) 423-4510 • (626) 965-8044 • Fax (626) 965-8960 • http://www.platoproducts.com • sales@platoproducts.com
NEW
NEW
NEW
21
Plato PProducts, IInc. 18731 Railroad St., Industry, CA 91748, USA • (800) 423-4510 • (626) 965-8044 • Fax (626) 965-8960 • http://www.platoproducts.com • sales@platoproducts.com
®
Tip samples are available. Custom tip designs on request.
All dimensions are shown beforetinning and are subject tomanufacturing tolerances.
Plato® Tips to fit Hakko® 702, 703, 703B, 926, 927, 928, 933, 936, 937Soldering Stations with Handpiece M926, 900M or 907 ESD, and
O.K. Industries SA1000 Station with SAI-640 Handpiece
Tip drawings are actual size.Hakko® Plato® Plato® Tip
900M-T-I HS-4787
900M-T-K HS-0927
900M-T-LB HS-4786
900M-T-R HS-0923
900M-T-RT HS-0924
900M-T-SB HS-4792
900M-T-SMD HS-4988
900M-T-S3 HS-1665
900M-T-S4 HS-8175
900M-T-S5 HS-8157
900M-T-S6 HS-5827
900M-T-S7 HS-5826
— HS-0530
— HS-0531
HS-8157 1/64" (0.4)
HS-09231/8" (3.2)
SMD Chip Tip
HS-8175.008" (0.2)
HS-1665 13/64" (5.2)
.040" (1.0)
HS-5827.050" (1.3)
HS-5826.046" (1.2)
HS-09245/64" (2.0)
SMD Chip Tip
HS-4988
.008" (0.2)
HS-0530.118" (3.0)
.128" (3.3)Plato® SMD Flow Tip
HS-0531.135" (3.4)
.195" (5.0)
Plato® SMD Flow Tip
HS-47861/64" (0.4)
HS-47871/64" (0.8)
3/16" (4.7)
HS-0927SMD Blade Tipto solder SOIC &PLCC
1/4"(6.3)
.010" (0.2)
HS-4792
.016" (0.4)
® Plato® Tips to fit Hakko® S-Type 702, 703, 703B, 927, 928, 936, 937Soldering Stations with Handpiece 900S, 900S-ESD
Hakko® Plato® Plato® Tip
900S-T-B HS-4875
900S-T-1.6D HS-2847
900S-T-I HS-4878
All points are 1/32" (0.8) thick unlessotherwise noted. ( ) = mmTip samples are available. Custom tipdesigns on request.All dimensions are shown before tinningand are subject to manufacturingtolerances.
Tip drawings are actual size.
NEW
22
Plato PProducts, IInc. 18731 Railroad St., Industry, CA 91748, USA • (800) 423-4510 • (626) 965-8044 • Fax (626) 965-8960 • http://www.platoproducts.com • sales@platoproducts.com
®
Hakko® Plato® Plato® Tip
900L-T-2B HS-4789
900L-T-2C HS-5705
900L-T-3C HS-5706
900L-T-4C HS-5707
900L-T-5C HS-5876
900L-T-1.6D HS-6094
900L-T-2.4D HS-6027
900L-T-3.2D HS-2755
900L-T-B HS-4788
900L-T-I HS-4790
900L-T-K HS-0922
900L-T-LB HS-8177
900L-T-S1 HS-1666
All points are 1/32" (0.8) thick unless otherwise noted. ( ) = mm
Tip samples are available. Custom tip designs on request.
All dimensions are shown before tinningand are subject to manufacturingtolerances.
Plato® Heavy Duty Tips to fit Hakko® 702, 703, 703B, 926, 927, 928,934, 936, 937 Soldering Stations with Handpiece
L926, 900L, 900L ESD, 908L or 908ESD
Tip drawings are actual size.
23
Plato PProducts, IInc. 18731 Railroad St., Industry, CA 91748, USA • (800) 423-4510 • (626) 965-8044 • Fax (626) 965-8960 • http://www.platoproducts.com • sales@platoproducts.com
®
Hakko® Plato® Plato® Tip
918-T-3C HS-5807
918-T-4C HS-5877
918-T-5C HS-5878
918-T-1.6D HS-2938
918-T-2.4D HS-2939
918-T-3.2D HS-6029
918-T-B HS-4838
918-T-BC HS-5806
All points are 1/32" (0.8) thickunless otherwise noted. ( ) = mm
Tip samples are available. Custom tip designs on request.
All dimensions are shown beforetinning and are subject tomanufacturing tolerances.
Plato® Tips to fitHakko® 918, Mach-I Soldering Irons
Tip drawings are actual size.
® Plato® Tips to fit Hakko® MG Soldering Gun Models582, 583, 585, 587, 589, 592
Tip samples are available. Custom tip designs on request.All dimensions are shown beforetinning and are subject tomanufacturing tolerances.
Hakko® Plato® Plato® Tip
582-T-4 400-8148
585-T-6 600-8149
587-T-8 800-8150
Tip drawings are actual size.
® Plato® Tips to fit Hakko Red Soldering Iron500 / 501 / 502 / 503
Hakko® Plato® Plato® Tip
BB-3 300-8179
BB-4 400-8182
BB-6 600-8181
Tip drawings are actual size.
24
Plato PProducts, IInc. 18731 Railroad St., Industry, CA 91748, USA • (800) 423-4510 • (626) 965-8044 • Fax (626) 965-8960 • http://www.platoproducts.com • sales@platoproducts.com
®
Hakko® Plato® Plato® Tip
920-T-2C HS-5781
920-T-3C HS-5857
920-T-4C HS-5859
920-T-1.0D HS-6095
920-T-1.6D HS-2936
920-T-2.4D HS-2937920-T-D
920-T-3.2D HS-2818
920-T-B HS-4840
920-T-BC HS-5805
920-T-I HS-4933
920-T-R HS-0876
920-T-RT HS-0877
Plato® Tips to fitHakko® 920, 921, 922, MACH-I Soldering Irons
Tip drawings are actual size.
All points are 1/32" (0.8) thick unless otherwise noted. ( ) = mm
Tip samples are available. Custom tip designs on request.
All dimensions are shown before tinning andare subject to manufacturing tolerances.
Hakko® Plato® Plato® Tip Tip drawings are actual size.
980-T-B HS-5710
980-T-BC HS-5711
980-T-D HS-5712
HS-5710.040" (1.0)
HS-5711.118" (3.0)
HS-5712
.140" (3.6)
All points are .041 (1.04) thick unlessotherwise noted. ( ) = mm
Tip samples are available. Custom tip designs on request.
All dimensions are shown before tinning and are subject to manufacturing tolerances.
® Plato® Tips to fit Hakko®
Soldering Iron 980 / 981
25
Plato PProducts, IInc. 18731 Railroad St., Industry, CA 91748, USA • (800) 423-4510 • (626) 965-8044 • Fax (626) 965-8960 • http://www.platoproducts.com • sales@platoproducts.com
® Plato® Tips to fit Hakko® Dash N454 Soldering Irons
®
Hakko® Plato® Plato® Tip
N454-T-B HS-4903
N454-T-D HS-1648
N454-T-I HS-8127
N454-T-2C HS-5885
N454-T-3C HS-5886
N454-T-4C HS-5887
N454-T-5C HS-5888
Plato® Tips to fitHakko® Dash N452 and N453 Soldering Irons
Tip drawings are actual size.
Tip drawings are actual size.
( ) = mm
Tip samples are available. Custom tip designs on request.
All dimensions are shown before tinning andare subject to manufacturing tolerances.
Hakko® Plato® Plato® Tip
N452-T-B HS-4860
N452-T-C HS-5879
N452-T-D HS-1647
N452-T-I HS-4904
N452-T-SB HS-8126
N452-T-SC HS-5880
N452-T-SD HS-1646
N452-T-1C HS-5881
N452-T-2C HS-5882
N452-T-3C HS-5883
N452-T-4C HS-5884
( ) = mm
Tip samples are available. Custom tipdesigns on request.
All dimensions are shown beforetinning and are subject tomanufacturing tolerances.
26
Plato PProducts, IInc. 18731 Railroad St., Industry, CA 91748, USA • (800) 423-4510 • (626) 965-8044 • Fax (626) 965-8960 • http://www.platoproducts.com • sales@platoproducts.com
® Plato® Tips to fit Hexacon® Therm-O-Trac 1001, 1002, 1002A& Select-O-Trac 1003A/B, 1006A/B Soldering Irons
Hexacon® Plato® Tip
J101X
J102X
J201X
J202X
J203X
J204X
J206X
J301X
J302X
J901X
J910X
J911X
Tip drawings are actual size. Hexacon® Plato® Tip
J912X
J914X
J915X
J916X
J917X
J918X
J919X
J932X
J935X
J940X
J954XAll points are 1/32" (0.8) thick unless otherwise noted. ( ) = mmTip samples are available. Custom tip designs on request.All dimensions are shown before tinning and are subject to manufacturingtolerances.
Tip drawings are actual size.
Plato PProducts, IInc. 18731 Railroad St., Industry, CA 91748, USA • (800) 423-4510 • (626) 965-8044 • Fax (626) 965-8960 • http://www.platoproducts.com • sales@platoproducts.com
® Plato® Tips to fit Hexacon® MS-10, MS-11, MS-14,MV-15/16, MS-17 & MF-20/21 Soldering Irons
All points are 1/32" (0.8) thick unless otherwise noted. ( ) = mm
Tip samples are available. Custom tip designs on request.
All dimensions are shown before tinning and are subject to manufacturing
tolerances.
* This indicates that the tip is nickel plated (economy grade); all other tips are iron clad (premium quality).
These tips have an internal diameter of 5/32" (4.0). They are slotted as shown and furnishedwith a retainer ring.
Tip drawings are actual size.Hexacon Plato® Plato® Tip
HT880X PS-383
HT881X PS-594
HT882X PS-411
HT883X PS-512
HT884X PS-555
HT885X PS-372
HT886X PS-157
--- PS-478
--- PS-508
--- PS-444*
--- PS-526*
®
Bonkote® Plato® Plato® Tip
5-0.5C BKT-5897
5-1C BKT-5899
5-2B BKT-8144
5-2BC BKT-5900
5-2C BKT-5898
5-2D BKT-6079
( ) = mm
Tip samples are available. Custom tip designs on request.
All dimensions are shown before tinning andare subject to manufacturing tolerances.
Plato® Tips to fitBonkote® SG5 Tip Series Used In PC-118SL
Tip drawings are actual size.
27
28
Plato PProducts, IInc. 18731 Railroad St., Industry, CA 91748, USA • (800) 423-4510 • (626) 965-8044 • Fax (626) 965-8960 • http://www.platoproducts.com • sales@platoproducts.com
® Plato® Tips to fit Bonkote® SG10 Tip Series used in SR-1062, -1062F, -1072, CRD-1030, -1040, CRL-1030,-1040, SRL-1062,
-1062F, -1072, SS-1005B, TC-300B, -400B, -500B
® Plato® Tips to fit Bonkote® SGL7 Tip Series used in CRD-730,-740, CRL-730,-740, CR-1073, SS-1005A, TC-300A,-400A,-500A
Bonkote® Plato® Plato® Tip
7-1C BKT-5736
7-2B BKT-4835
7-3C BKT-5738
7-5A BKT-2046
7-5B BKT-4836
7-KF BKT-0954
Tip drawings are actual size.
( ) = mm
Tip samples are available. Custom tip designs on request.
All dimensions are shown before tinning andare subject to manufacturing tolerances.
Bonkote® Plato® Plato® Tip
10-4C BKT-5777
10-6B BKT-4832
10-6C BKT-5778
10-8B BKT-4857
10-8D BKT-2792
10-KF BKT-0940
--- BKT-0940WB
( ) = mm
Tip samples are available. Custom tip designs on request.
All dimensions are shown before tinning andare subject to manufacturing tolerances.
Tip drawings are actual size.
29
Plato PProducts, IInc. 18731 Railroad St., Industry, CA 91748, USA • (800) 423-4510 • (626) 965-8044 • Fax (626) 965-8960 • http://www.platoproducts.com • sales@platoproducts.com
®
EdsynLoner® Plato® Plato® Tip
LT-374 E-4709
LT-375 E-2621
LT-376 E-2622
LT-381 E-8134
LT-383 E-4781
LT-392 E-4711
LT-393 E-5649
LT-394 E-2627
LT-395 E-2625
LT-425 E-2626
LT-429 E-4710
LT-430 E-5892
LT-431 E-2624
LT-444 E-2856
LT-444-1 E-6060
LT-445 E-5891
LT-446 E-4708
All points are 1/32" (0.8) thick unless otherwisenoted. ( ) = mm
Tip samples are available. Custom tip designson request.
All dimensions are shown before tinning and aresubject to manufacturing tolerances.
Plato® Tips to fit Edsyn Loner® CL1080, CL1180, 900 902, 920, 925, 930, 935, 951, 952, 952DX,
HX, SX, 981, LSTII Soldering Irons
Tip drawings are actual size.
30
Plato PProducts, IInc. 18731 Railroad St., Industry, CA 91748, USA • (800) 423-4510 • (626) 965-8044 • Fax (626) 965-8960 • http://www.platoproducts.com • sales@platoproducts.com
® Plato® Tips to fit OK Ind.® SA-3/10/10-E: BTR-35/55 stations; Nos. SAI-3, SAI-548A, SAI-60, SAI-560, SA-1200, SA-1201 systems,
Xytronic®, Start® 48 & 60 Watt Irons, and Elvo® E9-60A, E9-60D
TX-300
TX-3143/64" (1.2)
1/32" (0.8)
TX-4401/64" (0.4)
TX-3221/16" (1.6)
TX-367 1/8" (3.2)
TX-4061/32" (0.8)
TX-4291/32" (0.8)
TX-3385/64" (2.0)
TX-3433/32" (2.4)
TX-351
1/8" (3.2)
TX-60863/64" (1.2)
TX-70511/16" (1.6)
TX-60853/64" (1.2)
TX-7052.095" (2.4)
TX-70531/8" (3.2)
.024" (0.6)
OK Ind.® Xytronic® Elvo® Plato® Plato® Tip
SAT-3X10 823 E231 TX-440
SAT-3X20 --- E301 TX-406
SAT-3X30 822 E221 TX-300
SAT-3X40 826 E261 TX-314
SAT-3X50 824 E241 TX-322
SAT-3X60 --- --- TX-429
SAT-3X70 --- E311 TX-338
SAT-3X80 --- E281 TX-343
SAT-3X90 --- E291 TX-351
SAT-3X100 825 E251 TX-367
SAT-3X110 --- --- TX-7051
SAT-3X120 --- --- TX-7052
SAT-3X130 --- --- TX-7053
SAT-3X140 --- --- TX-6085
SAT-3X150 --- --- TX-6086
All points are 1/32" (0.8) thick unless otherwise noted.( ) = mm
Tip samples are available. Custom tip designs on request.
All dimensions are shown before tinning and are subject to manufacturing tolerances.
Tip drawings are actual size.
® Plato® Tips to fit OK Ind.® 30 Watt Soldering Irons,Start®, Elvo®, and Xytronic®
CI-2629
CI-2642
CI-4712
CI-4713
CI-4717
CI-5651
CI-5652
1/64" (0.4)
1/16" (1.6)
5/64" (2.0)
1/32" (0.8)
1/32" (0.8)
3/64" (1.2)
1/32" (0.8)
All points are 1/32" (0.8) thick unless otherwisenoted. ( ) = mm
Tip samples are available. Custom tip designs onrequest.
All dimensions are shown before tinning and aresubject to manufacturing tolerances.
OK Ind.® Plato® Plato® Tip
SAT-310X10 CI-4713
SAT-310X20 CI-2629
SAT-310X30 CI-2642
SAT-310X40 CI-4717
SAT-310X50 CI-5651
SAT-310X60 CI-5652
--- CI-4712
Tip drawings are actual size.
Plato PProducts, IInc. 18731 Railroad St., Industry, CA 91748, USA • (800) 423-4510 • (626) 965-8044 • Fax (626) 965-8960 • http://www.platoproducts.com • sales@platoproducts.com
® Plato® Tips to fit Ersa® Soldering Stations Analog 60, Analog 60A, Analog 80, Analog 80A, Digital 80A, Multi Pro, Micro-
Con 60 IA, Twin 80 A, ELS 8000/M/D, MS 6000, MS 8000/D31
ER-4743
.040" (1.0)
ER-2675
.085" (2.2)
ER-2676
.125" (3.2)
ER-2643
.085" (2.2)
ER-4742
.032" (0.8)
ER-8550
.013" (0.3)
ER-2678
.195" (5.0)
Ersa® Plato® Plato® Tip Tip drawings are actual size.
602BD ER-4743
602CD ER-2675
602ED ER-2676
602KD ER-2643
602SD ER-4742
602UD ER-8550
602VD ER-2678
All points are .035 (0.9) thick unless otherwisenoted. ( ) = mm
Tip samples are available. Custom tip designs on request.
All dimensions are shown before tinning and are subject to manufacturing tolerances.
Typical Tip Drawing
832BD ER-4002
832CD ER-3998
832DD ER-5001
832ED ER-3101
832FD ER-5002
832ID ER-4003
832KD ER-3997
832OD ER-0975
832UD ER-4005
832SD ER-4004
— ER-4006
832YD ER-3999
832PW ER-5003
ER-4002
.040" (1.0)
.085" (2.2)
ER-3998
.037" (0.9)ER-4003
.016" (0.4)
ER-4005
.030" (0.8)
ER-4004
.015" (0.4)
ER-4006
.062" (1.6)
ER-3999
.012" (0.3)
SMD BLADE TIP TOSOLDER SOIC AND PLCCER-0975 .285"
(7.2)
.200" (5.0)
.158" (4.0)PLATO® SMD FLOW TIPER-5003
.165" (4.2)
ER-5002
.080" (2.0)
ER-5001
.040" (1.0)
.085" (2.2)
ER-3997
.126" (3.2)
ER-3101
Tip samples are available. Custom tip designs on request.
All dimensions are shown before tinning and are subject to manufacturing tolerances.
Typical Tip Drawing
NEW!
32
Plato PProducts, IInc. 18731 Railroad St., Industry, CA 91748, USA • (800) 423-4510 • (626) 965-8044 • Fax (626) 965-8960 • http://www.platoproducts.com • sales@platoproducts.com
®
Pace® Plato® Plato® Tip
1121-0335 33-6055
1121-0336 33-8142
1121-0337 33-6058
1121-0349 33-1657
1121-0357 33-8141
1121-0358 33-1658
1121-0359 33-1144
1121-0360 33-6057
1121-0361 33-1146
1121-0363 33-8143
1121-0406 33-5894
1121-0414 33-6056
1121-0490 33-5895(similar to)
1121-0499 33-1147
1121-0500 33-1148
1121-0563 33-5896
1121-0564 33-5897
1121-0610 33-5898
3/16" (4.8mm) Plato® Tips to fit Pace® SP-1A, SP-2A, PS-80, ST-45, IR-70 SODR-PEN® Soldering Irons
1/64" (0.4)33-8141
1/16" (1.5)33-6055
1/32" (0.8)33-8142
1/8" (3.2)
33-6058
1/16" (1.5)33-1657
3/32" (2.4)33-6057
1/16" (1.5)33-6056
3/16" (4.8)
33-1658
.031" (0.8)
1/8" (3.2)
33-5894
1/16" (1.5)33-1147
1/32" (0.8)33-1144
33-8143.020" (0.5)
33-1148.055" (1.4)
.025" (0.6)
33-1146
.047" (1.2).020"(0.5)
33-5895
.135" (3.4).195" (5.0)
Plato® SMDFlow Tip
Tip drawings are actual size.
All points are .025" (0.6) thick unless otherwisenoted. ( ) = mm
Tip samples are available. Custom tip designs on request.
All dimensions are shown before tinning and are subject to manufacturingtolerances.
.06" (1.5)
33-5896SMD Tip
33-5897
.07" (1.8)
SMD Tip
33-5898
.09" (2.3)
SMD Tip
33
Plato PProducts, IInc. 18731 Railroad St., Industry, CA 91748, USA • (800) 423-4510 • (626) 965-8044 • Fax (626) 965-8960 • http://www.platoproducts.com • sales@platoproducts.com
Pace® Plato® Plato® Tip
1121-0302 SMP-2001
1121-0303 SMP-2002
1121-0304 SMP-2003
1121-0305 SMP-2005
1121-0402 SMP-2004
SMP-2001
3/32" (2.4)
SMD Chip Tip
SMP-2002
.145" (3.7)
SMD Chip Tip
SMP-2003
1/16" (1.6)SMD Tip toSolder SOT's
SMP-2004
3/16" (4.7)
.250"(6.3)
SMD Blade Tipto Solder SOIC & PLCC's
.020" (0.5)
SMP-2005
.318" (8.0)
.450"(11.4)
SMD Blade Tipto Solder SOIC & PLCC's
.038" (.96)
® 3/16" (4.8mm) Plato® Surface Mount Tips to fit Pace®
SP-1A, SP-2A, PS-80, ST-45 & IR-70 SODR-PEN®
Soldering Irons
Tip drawings are actual size.
® Thermo-Drive® Tips to fit Pace® SP-1A, SP-2A, PS-80, ST-45 & IR-70 Soldering Irons
Pace® Plato®* Plato® Tip Tip drawings are actual size.
1121-0510 33-3985
1121-0516 33-3981
1121-0518 33-3986
1121-0524 33-3983
1121-0525 33-3984
1121-0526 33-3982
All points are .025" (0.6) thick unless otherwisenoted. ( ) = mm
Tip samples are available. Custom tip designs on request.
All dimensions are shown before tinning and are subject to manufacturing tolerances.
® Extended Reach Tips to fit Pace® SP-1A, SP-2A, PS-80, ST-45 & IR-70 Soldering Irons
Pace® Plato®* Plato® Tip Tip drawings are actual size.
1121-0527 33-7102
1121-0528 33-7101
1121-0529 33-7104
1121-0530 33-7105
1121-0531 33-7106
1121-0532 33-7107
1121-0533 33-7103
33-7101.015" (0.4)
33-7102.031" (0.8)
33-7103.062" (1.6)
33-7104.093" (2.4)
33-7105.125" (3.2)
33-7107.125" (3.2)
33-7106
.187" (4.8)
.031" (0.8)
All points are .025" (0.6) thick unless otherwisenoted. ( ) = mm
Tip samples are available. Custom tip designs on request.
All dimensions are shown before tinning and are subject to manufacturing tolerances.
All dimensions are shown before tinning and are subject to manufacturing tolerances.
33-3981.015" (0.4)
33-3982
.015" (0.4)
33-3983.047" (1.2)
33-3985.062" (1.6)
33-3986.125" (3.2)
33-3984
.047" (1.2)
.020" (0.5)
34
Plato PProducts, IInc. 18731 Railroad St., Industry, CA 91748, USA • (800) 423-4510 • (626) 965-8044 • Fax (626) 965-8960 • http://www.platoproducts.com • sales@platoproducts.com
D1 - Hole DiameterL1/8" (3.2)
NOT ACTUAL SIZE.
D2
® Plato® Tips to fit Pace®, Air-Vac®, and A.P.E.® Desoldering Irons
D1 - Hole Diameter
L1/8" (3.2)
NOT ACTUAL SIZE.
D2
Pace® Plato® L D1 D2 Plato® Tip
Plato® Tips to fit Pace® SX-20, SX-25, SX-25V SODR-X-TRACTORS®
1121-0213 20-0109 1.00" (25.4) .025" (0.6) .060" (1.5)1121-0480 20-0114 1.00" (25.4) .030" (0.8) .060" (1.5)--- 20-0815 1.00" (25.4) .036" (0.9) .065" (1.7)1121-0479 20-0110 1.00" (25.4) .040" (1.0) .080" (2.0)1121-0216 20-0113 1.00" (25.4) .050" (1.3) .090" (2.3)1121-0217 20-0111 1.00" (25.4) .060" (1.5) .100" (2.5)1121-0091 20-0112 1.00" (25.4) .090" (2.3) .125" (3.2)
Plato® Tips to fit Pace®. SX-40A, SX-55A, SX-65A, SX-70 SODR-X-TRACTORS®
with Plato Adapter 33-0001
1121-0485 20-025 1.75" (44.5) .030" (0.8) .080" (2.0)1121-0486 20-040 1.75" (44.5) .040" (1.0) .080" (2.0)--- 20-050 1.75" (44.5) .050" (1.3) .090" (2.3)1121-0255 20-060 1.75" (44.5) .060" (1.5) .100" (2.5)
Plato® Tips to fit Pace®. SX-40A, SX-55A, SX-65A, SX-70 SODR-X-TRACTORS®
with Plato Adapter 33-0001
1121-0261 20-0030 1.75” (44.5) .030" (0.8) .080" (2.0)1121-0262 20-0040 1.75” (44.5) .040" (1.0) .080" (2.0)1121-0267 20-0060 1.75" (44.5) .060" (1.5) .090" (2.3)
Premium Quality for Long LifeMade of oxygen-free high-conductivity copper, protected inside and outside tominimize erosion by solder.Tip samples are available. Custom tip designs on request. ( ) = mmSee cross-reference table in front of catalog forcompetitive cross-references to Air-Vac® and A.P.E.®
Packaged 10 pieces per pack.
These newly designed tips are engineered with a side wall that is more than 50% heavier (thicker) than our standard tips. These offer the operator a tip that is more resistant todeformation when used to pry or move leads. These long-life tips will offer improved heat recovery and life. They are available in 1" (25.4 mm) and 1.75" (44.5 mm) lengths andin the following ID’s: .040" (1.0 mm), .050 (1.3 mm), .060 (1.5 mm). These new tips are identified with HW added to the part number. Samples are available. ( ) = mm
PPaaccee®® AAiirr-VVaacc®® AAPPEE®® PPllaattoo®® LL DD11
PPllaattoo®® TTiippss ttoo ffiitt PPaaccee®® SSXX-2200,, SSXX-2255,, SSXX-2255VV SSOODDRR-XX-TTRRAACCTTOORRSS®®
1121-0215 30, 36, 45 1212-0440 20-0110-HW 1.00" (25.4) .040" (1.0)1212-084
1121-0216 — 1212-0550 20-0113-HW 1.00" (25.4) .050" (1.3)1212-083
1121-0217 60, 61 1212-0660 20-0111-HW 1.00" (25.4) .060" (1.5)1212-082
PPaaccee®® AAiirr-VVaacc®® AAPPEE®® PPllaattoo®® LL DD11
PPllaattoo®® TTiippss ttoo ffiitt PPaaccee®® SSXX-4400AA,, SSXX-5555AA,, SSXX-6655AA,, SSXX-7700 SSOODDRR-XX-TTRRAACCTTOORRSS®®
1121-0254 — — 20-040-HW 1.75" (44.5) .040" (1.0)— — — 20-050-HW 1.75" (44.5) .050" (1.3)1121-0255 — — 20-060-HW 1.75" (44.5) .060" (1.5)
® Plato® Heavy Wall Desoldering Tips to fit Pace®, Air-Vac®, A.P.E.®, Desoldering Irons
Tip drawings are actual size.
All points are 1/32" (0.8) thick unless otherwisenoted. ( ) = mm
All dimensions are shown before tinning and are subject to manufacturing tolerances.
22-16271/8" (3.2)
22-29311/16" (1.6)
22-4927.020" (0.5)
22-70713/32" (2.4)
22-8001.020" (0.5)
22-80031/32" (0.8)
22-10711/8" (3.2)
22-60721/16" (1.6)
22-80021/32" (0.8)
22-50733/32" (2.4)
33-0001
.132" (3.4)
1/8" ((3.2mm) PPlato® Tips uused wwith PPlato AAdapter 333-00001 tto ffit PPace® IR-225, PPS-880, IIR-770 SSoldering IIrons aand SSP-11A oorSP-22A SSODR-PPEN®
1121-0130 22-1627
1121-0131 22-2931
1121-0132 22-4927
1121-0238 22-7071
1121-0339 22-8001
1121-0340 22-8003
1121-0501 22-1071
1121-0502 22-6072
1121-0503 22-8002
1121-0504 22-5073
Plato® Adapter 333-00001 ((Pace® Adaptip® equivalent) tto bbe uused wwith aall 11/8” DDiameter SSolder aand DDesolder TTips
1360-0083 33-0001
35
Plato PProducts, IInc. 18731 Railroad St., Industry, CA 91748, USA • (800) 423-4510 • (626) 965-8044 • Fax (626) 965-8960 • http://www.platoproducts.com • sales@platoproducts.com
® 3/16" (4.8mm) Plato® Tips to fit Pace® SX-65A & SX-70 SODR-X-TRACTORS®
D1 - Hole DiameterD2
D2D1 - Hole Diameter
Solder Path Protected ByStainless Steel Tube
Pace® Plato® Pace® Plato®
Economy Economy Premium PremiumGrade Grade Grade Grade D1 D2 Plato® Economy Grade Tip1121-0505 30-0003 --- --- .030" .075"
(0.8) (2.9)
1121-0494 30-0004 --- --- .040" .085"(1.0) (2.2)
1121-0506 30-0006 --- --- .060" .105”(1.5) (2.7)
1121-0367 30-0300 1121-0462* 30-030* .030" .065" (0.8) (1.7)
1121-0342 30-0400 1121-0463* 30-040* .040" .085" (1.0) (2.2)
--- --- --- 30-050* .050" .095" (1.3) (2.4)
1121-0368 30-0600 1121-0464* 30-060* .060" .115" (1.5) (2.9)
1121-0507 30-0900 --- --- .090” .190”(2.3) (4.8)
1121-0369 30-0060 1121-0465* 30-6000* .060" .188" (Not shown) (1.5) (4.8)
PPrreemmiiuumm GGrraaddee TTiippssIron plated outside and stainless steel tube insert prevents solder path erosion by solder.
EEccoonnoommyy GGrraaddee TTiippssEconomy grade tips do not have a stainless steel tube insert. They are made of oxygen-free high-conductivity copper, nickel-plated inside and outside to minimize corrosion by solder.
Tip samples are available. Custom tip designs on request. All dimensions are shown beforetinning and are subject to manufacturing tolerances. ( ) = mm
*Indicates tips with a stainless steel tube insert.
Tip drawings are actual size.
®
D1 - Hole DiameterD2
Solder Path Protected ByStainless Steel Tube
Plato® Tips to fit Edsyn® ZD500/505/905/906 Desoldering Irons
® Plato® Tips to fit OK Industries® BTR-15/25/35/55,DG 20065/24100/28110 Handpieces and
SA-600/1201 Desoldering Irons
LD1 - Hole DiameterD2
Solder Path Protected ByStainless Steel Tube
OK Ind.® Plato® L D1 D2 Plato® Premium Quality Tip
BTR-D-027 OO-0737 .75" (19.0) .027" (0.7) .080" (2.0)BTR-D-031 OO-0738 .75" (19.0) .031" (0.8) .085" (2.2)BTR-D-039 OO-0739 .75" (19.0) .039" (1.0) .090" (2.3)BTR-D-047 OO-0740 .75" (19.0) .047" (1.2) .100" (2.5)BTR-D-063 OO-0741 .75" (19.0) .063" (1.6) .115" (2.9)
Edsyn® Plato® D1 D2 Plato® Premium Quality Tip
ZD08 EZ-030 .030" (0.8) .085" (2.2)ZD12 EZ-030 .030" (0.8) .085" (2.2)ZD10 EZ-040 .040" (1.0) .095" (2.4)ZD13 EZ-040 .040" (1.0) .095" (2.4)ZD11 EZ-050 .050" (1.3) .115" (2.9)ZD14 EZ-050 .050" (1.3) .115" (2.9)--- EZ-060 .060" (1.5) .115" (2.9)ZD09 EZ-070 .070" (1.8) .125" (3.2)ZD18 EZ-070 .070" (1.8) .125" (3.2)
Premium Quality for Long LifeIron plated to resist erosion by solder. Stainless steel tube prevents solder path erosion by solder.Tip samples are available. Custom tip designs on request. All dimensions are shown before tinning and aresubject to manufacturing tolerances. ( ) = mm
PPrreemmiiuumm QQuuaalliittyy ffoorr LLoonngg LLiiffee.. Heavy iron plating and inner lining consisting of a stainless steel tube. Tip samples are available. Custom tip designs on request. All dimensions are shown before tinning and are subject to manufacturing tolerances. ( ) =mm
Tip drawings are actual size.
Tip drawings are actual size.
D2D1 - Hole Diameter
30-0060
Plato® Premium Grade Tip
36
1.43" (36.0)D1 - Hole DiameterD2
Plato PProducts, IInc. 18731 Railroad St., Industry, CA 91748, USA • (800) 423-4510 • (626) 965-8044 • Fax (626) 965-8960 • http://www.platoproducts.com • sales@platoproducts.com
® Plato® Tips to fit Hakko® Ace 484, OK Industries® SA-100, SA-300, SA-400, DG10, DG30, DG50 Desoldering Irons
0.57" (14.5)
D1 - Hole DiameterD2
1.22" (31.0)D1 - Hole DiameterD2
Hakko® OK Ind.® Plato® D1 D2 Plato® Premium Quality Tip
483-T-0.8 SAT-4V-031 HK-0008 .030" (0.8) .090" (2.3)800-T-0.8
483-T-1.0 SAT-4V-039 HK-0010 .040" (1.0) .090" (2.3)800-T-1.0
483-T-1.3 SAT-4V-051 HK-0013 .050" (1.3) .100" (2.5)800-T-1.3
483-T-1.6 SAT-4V-063 HK-0016 .060" (1.5) .120" (3.0)800-T-1.6
483-T-1.0S --- HKL-0010 .040" (1.0) .090" (2.3)800-T-1.0S
® Plato® Tips to fit Hakko® 483, 700, 707, 800 & 800L, OK Ind.®
SA-150/250/350/450, DG-20/40/60 Desoldering Irons
Premium Quality for Long LifeIron plated to resist corrosion by solder.Tip samples are available. Custom tip designs on request.All dimensions are shown before tinning and are subject tomanufacturing tolerances. ( ) = mm
Tip drawings are actual size.
® Plato® Tips to fit Hakko® Desoldering Irons 474, 475, 701 with Handpiece 808 and 809
0.755"(19.0)D1 - Hole DiameterD2
Stainless Steel Tube
Hakko® Plato® D1 D2 Plato® Premium Quality Tip
A-1002 HK-0878 .030" (0.8) .070" (1.8)
A-1003 HK-0879 .040" (1.0) .080" (2.0)
A-1004 HK-0880 .030" (0.8) .090" (2.3)
A-1005 HK-0881 .040" (1.0) .100" (2.5)
A-1006 HK-0882 .050" (1.3) .120" (3.0)
A-1007 HK-0883 .060" (1.5) .120" (3.0)
Premium Quality for Long LifeIron plated with solder path protected by stainless steel tube to resisterosion by solder.Tip samples are available. Custom tip designs on request.All dimensions are shown before tinning and are subject tomanufacturing tolerances. ( ) = mm
Tip drawings are actual size.
Hakko® OK Ind.® Plato® D1 D2 Plato® Premium Quality Tip
481-T-0.8 SAT-4-031 TM-007 .030" (0.8) .070" (1.8)
481-T-1.0 SAT-4-039 TM-010 .040" (1.0) .090" (2.3)
481-T-1.3 SAT-4-051 TM-013 .050" (1.3) .100" (2.5)
481-T-1.6 SAT-4-063 TM-015 .060" (1.5) .120" (3.0)
--- --- TM-023 .090" (2.3) .107" (2.8)
Premium Quality for Long LifeIron plated to resist erosion by solder. Tip samples are available.Custom tip designs on request. All dimensions are shown beforetinning and are subject to manufacturing tolerances. ( ) = mm
Tip drawings are actual size.
37
1/2"(12.7)
D1 - Hole DiameterD2
Stainless Steel Tube
Plato PProducts, IInc. 18731 Railroad St., Industry, CA 91748, USA • (800) 423-4510 • (626) 965-8044 • Fax (626) 965-8960 • http://www.platoproducts.com • sales@platoproducts.com
® Plato® Tips to fit Weller® DS-102/200/200K/501/600/601P/1201/1201ESD/1203A/700M/800 Desoldering Stations
1/2"(12.7)
D1 - Hole DiameterD2
Solder Path Protected ByStainless Steel Tube
3/4"(19.0)D1 - Hole Diameter
D2
Solder Path Protected ByStainless Steel Tube
® Plato® Tips to fit Plato® V-581/682/985/185SF Desoldering Irons
D2LD1 - Hole Diameter
Solder Path Protected ByStainless Steel Tube
D2D1 - Hole Diameter
L
Solder Path Protected ByStainless Steel Tube
Plato® Plato®
M5 Threads 12-24 UNC ThreadsWeller® Metric Version U.S. Version D1 D2 Plato® Premium Quality Tip
DS-110 TM-10 T-0138 .025" (0.6) .070" (1.7)
DS-112 TM-12 T-0139 .040" (1.0) .090" (2.3)
DS-113 TM-13 T-0140 .050" (1.3) .105" (2.7)
DS-114 TM-14 T-0141 .080" (2.0) .132" (3.2)
DS-117 TM-18 — .060" (1.5) .115" (2.9)
DS-115* TM-17 — .025" (0.6) .075" (1.9)
DS-116* TM-16 T-0136 .050" (1.3) .105" (2.7)
DS-117* — T-0137 .025" (0.6) .105" (2.7)
Premium Quality for Long LifeStainless steel tube prevents solder path from erosion by solder. Heavy iron plating atworking surfaces. Tinned for good heat transfer. Threads and body immunized. Tip samplesare available. Custom tip designs on request. All dimensions are shown before tinning andare subject to manufacturing tolerances. ( ) = mm
Tip drawings are actual size.
Plato® Plato®
M5 Threads 12-24 UNC ThreadsWeller® Metric Version U.S. Version D1 D2 Plato® Economy Grade Tip
DST 1 TM-1 T-0261 .038" (1.0) .080" (2.0)
DST 2 TM-2 T-0262 .045" (1.1) .100" (2.5)
DST 4 TM-4 T-0264 .060" (1.5) .135" (3.4)
DST 5 TM-5 T-0265 .080" (2.0) .150" (3.8)
Plato® L D1 D2 Plato® Premium Quality Tip
VT-0025 .500" (12.7) .025" (0.6) .070" (1.8)VT-0033 .500" (12.7) .033" (0.8) .070" (1.8)VT-0040 .500" (12.7) .040" (1.0) .090" (2.3)VT-0050 .500" (12.7) .050" (1.3) .100" (2.5)VT-0060 .500" (12.7) .060" (1.5) .120" (3.0)VT-0090 .500" (12.7) .090" (2.3) .170" (4.3)
VT-1050 .750" (19.0) .050" (1.3) .100" (2.5)
Economy Grade - Nickel plated copper
Solder path nickel-plated to reduce erosion by solder.Tip samples are available. Custom tip designs on request. All dimensions are shownbefore tinning and are subject to manufacturing tolerances. ( ) = mm
Tip drawings are actual size.
Premium Quality for Long LifeStainless steel tube prevents solder path from erosion by solder. Heavy iron plating at workingsurfaces. Tinned for good heat transfer. Threads and body immunized.Custom tip designs on request. All dimensions are shown before tinning and are subject tomanufacturing tolerances. ( ) = mm
Tip drawings are actual size.
® Plato® Tips to fit Weller®
DS-40P, DS-60, DS-TCP Desoldering Stations
*
38 Plato® Tips to fit Antex® C, G, M and CSTC Soldering Irons
Plato PProducts, IInc. 18731 Railroad St., Industry, CA 91748, USA • (800) 423-4510 • (626) 965-8044 • Fax (626) 965-8960 • http://www.platoproducts.com • sales@platoproducts.com
All points are 1/32" (0.8) thick unless otherwise noted. ( )= mm
Custom tip designs on request. All dimensions are shownbefore tinning and are subject to manufacturingtolerances.
* This indicates that the tip is nickel plated (economy grade); all other tips are iron clad
(premium quality).
®
A-108
A-521
A-144
A-542
A-5217*
A-417
A-4212*
A-469
A-551
7/64" (2.8)
3/32" (2.4)
1/16" (1.6)
1/16" (1.6)
3/64" (1.2)
1/64" (0.4)
Sharp
1/32" (0.8)
1/32" (0.8)
A-5890
1/16" (1.6)
Tip drawings are actual size.
TYPICAL TIP DRAWINGThese tips have an internal diameter of 9/64" (3.6). Theyare slotted as shown and are furnished with a retainerring.
® Plato® Tips to fit Oryx® Soldering Irons
O-4209
Sharp
O-4210
1/32" (0.8)
O-4300
1/32" (0.8)
O-5214
3/64" (1.2)
O-408
1/64" (0.4)
O-569
1/32" (0.8)
*
*
*
*
( ) = mm
Tip samples are available. Custom tip designs on request.
All dimensions are shown before tinning and are subject to manufacturing
tolerances.
* This indicates that the tip is nickel plated (economy grade); all other tips are iron clad (premium quality).
Tip drawings are actual size.
Antex® Plato® Plato® Tip
2-IC A-108
2-IS A-521
46-IC A-144
46-IS A-542
8-I A-417
--- A-469
--- A-551
6-NS A-5217*
--- A-4212*
46-NS A-5890*
Similar toOryx® Plato® Plato® Tip
P O-5214*
X O-4209*
X-PL O-408
--- O-4210*
--- O-4300*
--- O-569
Plato PProducts, IInc. 18731 Railroad St., Industry, CA 91748, USA • (800) 423-4510 • (626) 965-8044 • Fax (626) 965-8960 • http://www.platoproducts.com • sales@platoproducts.com
® 1/8" (3.2mm) Plato® Tips used with Plato Adapter 33-0001 to fit Pace® IR-25, PS-80, IR-70 Soldering Irons
and SP-1A or SP-2A SODR-PEN®
20-851
1/32" (0.8)
21-175
1/16" (1.6)
21-572
1/16" (1.6)
22-687
1/64" (0.4)
22-449
1/32" (0.8)
22-320
1/16" (1.6)
22-315
3/32" (2.4)
22-142
1/8" (3.2)
22-428
1/32" (0.8)
22-127
1/8" (3.2)
Tip drawings are actual size.American
Hexacon® Beauty® Esico® Plato® Plato® Tip
HT104 524 --- 20-851HT511
HT222 510 240-102 22-449240-111
HT249 501 210-132 22-127210-143
HT331 --- --- 22-687
HT361 503 211-105 21-175211-127
HT376 502 210-107 22-142210-114
HT477 271 --- 22-315
HT560 507 220-103 22-320HT667 220-116
HT693 512 251-120 21-572251-131
--- 509 --- 22-428
39
® 1/8" (3.2mm) Plato® Tips to fit Hexacon®, AmericanBeauty®, Esico®, Pace®, and A.P.E.® Soldering Irons
All points are 1/32" (0.8) thick unless otherwise noted. ( ) = mm
All points are 1/32" (0.8) thick unless otherwisenoted. ( ) = mm
All dimensions are shown before tinning and are subject to manufacturing tolerances.
Pace® Plato® Plato® Tip Tip drawings are actual size.
1121-0130 22-1627
1121-0131 22-2931
1121-0132 22-4927
1121-0238 22-7071
1121-0339 22-8001
1121-0340 22-8003
1121-0501 22-1071
1121-0502 22-6072
1121-0503 22-8002
1121-0504 22-5073
1360-0083 33-0001
22-16271/8" (3.2)
22-29311/16" (1.6)
22-4927.020" (0.5)
22-70713/32" (2.4)
22-8001.020" (0.5)
22-80031/32" (0.8)
22-10711/8" (3.2)
22-60721/16" (1.6)
22-80021/32" (0.8)
22-50733/32" (2.4)
33-0001
.132" (3.4)
Plato® Adapter 333-00001 ((Pace® Adaptip® equivalent) tto bbe uused wwith aall 11/8” DDiameter SSolder aand DDesolder TTips
All dimensions areshown before tinning andare subject to manufacturingtolerances.
40
Plato PProducts, IInc. 18731 Railroad St., Industry, CA 91748, USA • (800) 423-4510 • (626) 965-8044 • Fax (626) 965-8960 • http://www.platoproducts.com • sales@platoproducts.com
® 3/16" (4.8mm) Plato® Tips to fit Hexacon®, American Beauty®, and Esico® Soldering Irons
All points are 1/32" (0.8) thick unless otherwise noted. ( ) = mmTip samples are available. Custom tip designs on request.
All dimensions are shown before tinning and are subject to manufacturing tolerances.
30-1191
31-150
31-517
32-168
32-306
32-338
32-402
32-660
33-131
33-3396
33-364
33-395
33-415
33-464
1/8" (3.2)
1/64" (0.4)
3/16" (4.8)
3/32" (2.4 )
1/32" (0.8)
1/16" (1.6)
1/16" (1.6)
1/32" (0.8)
1/8" (3.2)
1/32" (0.8)
1/16" (1.6)
1/16" (1.6)
3/32" (2.4)
3/32" (2.4)
Tip drawings are actual size.American
Hexacon® Beauty® Esico® Plato® Plato® Tip
HT118 630 --- 32-402
HT190 619 320-136 33-395320-144
HT195 643 310-108 33-131310-115
HT207 617 320-109 33-364320-118
HT214* 621 340-107 33-464340-114
HT220 --- --- 31-517
HT276 604 311-103 31-150311-124
HT281 625 --- 33-415
HT474 605 312-105 32-168607 312-116
HT479 626 342-112 32-660342-119
HT548 615 322-220 32-338322-146
HT892 --- --- 33-3396
--- --- --- 30-1191
HT107* 613 322-104 32-306322-117
* Similar
1/4" (6.4mm) Plato® Tips to fit Hexacon®, American Beauty®, and Esico® Soldering Irons
Plato PProducts, IInc. 18731 Railroad St., Industry, CA 91748, USA • (800) 423-4510 • (626) 965-8044 • Fax (626) 965-8960 • http://www.platoproducts.com • sales@platoproducts.com
41-199
41-545
42-355
42-347
42-117
42-138
43-754
42-628
44-443
44-3113
44-706
44-390
44-386
44-352
44-152
46-626
1/16" (1.6)
3/16" (4.8)
1/8" (3.2)
1/32" (0.8)
5/32" (4.0)
1/8" (3.2)
1/8" (3.2)
3/16" (4.8 )
1/32" (0.8)
3/16" (4.8)
1/8" (3.2)
1/16" (1.6)
1/16" (1.6)
1/4" (6.4)
3/32" (2.4)
3/32" (2.4)
®
Tip drawings are actual size.American
Hexacon® Beauty® Esico® Plato® Plato® Tip
HT159 --- 451-146 41-545451-167
HT313 715 --- 44-352
HT324 703 412-246 42-138412-159
HT343 724 440-129 44-443440-177
HT358 714 422-347 42-347422-144
HT397 720 420-143 44-386420-164
HT417 721 420-106 44-390420-119
HT451 701 412-103 42-117412-131
HT463 --- 413-102 43-754413-134
HT513 --- 442-153 42-628442-139
HT552 --- 426-161 46-626426-173
--- --- --- 44-3113
HT586 --- 420-201 44-706
HT691 706 411-107 41-199411-123
HT359 716 422-108 42-355422-132
HT553* 704 410-140 44-152410-126
All points are 1/32" (0.8) thick unless otherwise noted. ( ) = mmTip samples are available. Custom tip designs on request.
All dimensions are shown before tinning and are subject to manufacturing tolerances.
* Similar
41
42 1/4" (6.4mm) Plato® Tips to fit Hexacon®, American Beauty®, and Esico® Soldering Irons
Plato PProducts, IInc. 18731 Railroad St., Industry, CA 91748, USA • (800) 423-4510 • (626) 965-8044 • Fax (626) 965-8960 • http://www.platoproducts.com • sales@platoproducts.com
All points are 1/32" (0.8) thick unless otherwise noted. ( ) = mmTip samples are available. Custom tip designs on request.
All dimensions are shown before tinning and are subject to manufacturing tolerances.
®
1/16"(1.6)42-713
1/32"(0.8)42-685
1/16"(1.6)
1/8"(3.2)
3/16"(4.8)
1/32"(0.8)
1/8"(3.2)
3/16"(4.8)
42-619
42-683
43-799
44-653
44-715
44-611
3/16"(4.8)
46-912
3/32"(2.4)
40-712
Tinned on flat only
1/4"(6.4)
44-105
3/32"(2.4)40-5198
Tinned on flat only
Tip drawings are actual size.American
Hexacon® Beauty® Esico® Plato® Plato® Tip
HT131 --- 440-138 44-653
HT202 738 420-130 44-611
HT356 --- 422-113 42-619
HT426 --- 420-114 44-715
HT452 739 442-147 42-685
HT453 --- --- 40-712
HT468 67-S --- 44-105
HT473 --- 413-117 43-799
HT685 --- 412-110 42-683
HT773 --- 426-189 46-912
HT841 730 --- 42-713
--- --- --- 40-5198
5/16" (8.0mm) Plato® Tips to fit Hexacon® Soldering Irons
Plato PProducts, IInc. 18731 Railroad St., Industry, CA 91748, USA • (800) 423-4510 • (626) 965-8044 • Fax (626) 965-8960 • http://www.platoproducts.com • sales@platoproducts.com
®
55-321
3/16"(4.8)
55-336
1/8"(3.2)
55-316
1/4"(6.4)
55-133
5/16"(8.0)
55-118
5/16"(8.0)
3/8" (9.5mm) Plato® Tips to fit Hexacon®, American Beauty®, and Esico® Soldering Irons
®
66-4091/16" (1.6)
66-367
3/16" (4.8)
63-155
3/16" (4.8)
66-145
3/8" (9.5)
66-325
5/32" (4.0)
66-201
1/16" (1.6)
All points are 1/16" (1.6) thick unless otherwise noted. ( ) = mm Tip samples are available. Custom tip designs on request. All dimensions are shown before tinning and are subject to manufacturing tolerances.
Tip drawings are actual size.
Tip drawings are actual size.
All points are 1/32" (0.8) thickunless otherwise noted. ( ) =mm
Tip samples are available. Custom tip designs on request.
All dimensions are shown beforetinning and are subject tomanufacturing tolerances.
Hexacon Plato® Plato® Tip
HT506 55-316
HT547 55-118
HT550 55-321
HT556 55-336
--- 55-133
Hexacon® Plato® Plato® Tip
HT108 66-409
HT129 66-367
HT145 63-155
HT151 66-145
HT566 66-201
HT918* 66-325
* Similar
43
3/8" (9.5mm) Plato® Tips to fit Hexacon®, American Beauty®, and Esico® Soldering Irons
Plato PProducts, IInc. 18731 Railroad St., Industry, CA 91748, USA • (800) 423-4510 • (626) 965-8044 • Fax (626) 965-8960 • http://www.platoproducts.com • sales@platoproducts.com
®
66-300
1/4" (6.4)
66-911
3/16" (4.8)
66-627
3/16" (4.8)
66-349
5/16" (8.0)3/32" (2.4)
66-704
3/8" (9.5) 11/64" (4.4)
Tip drawings are actual size.
5/8" (15.9mm) Plato® Tips to fit Hexacon®, American Beauty®, Esico®, Weller® Marksman SP175 Soldering Irons
®
All points are 1/16" (1.6) thick unless otherwise noted. ( ) = mmTip samples are available. Custom tip designs on request. All dimensions are shown before tinning and are subject to manufacturing tolerances.
1010-104
1010-184
1010-286
1010-397
1/8" (3.2)
5/8" (15.9)
1/16" (1.6)
5/8" (15.9)
5/16" (8.0)
Tip drawings are actual size.
All points are 1/16" (1.6) thick unless otherwise noted. ( ) = mmTip samples are available. Custom tip designs on request. All dimensions are shown before tinning and are subject to manufacturing tolerances.
Hexacon® Plato® Plato® Tip
HT178 1010-397
HT256 1010-286
HT891 1010-104
HT499 1010-184
Hexacon® Plato® Plato® Tip
HT449 66-300
HT470 66-349
HT472 66-911
--- 66-627
--- 66-704
44