http://www.fischer.co.uk/ - 18/02/2014

Spring toggle KD 3+4, KDH 3+4

Cav

ity

fix

ing

s

1

The cavity fixing for different board thicknesses and large

usage lengths

BUILDING MATERIALS

Gypsum plasterboard and gypsumfibreboards

▪

Cavity floor slabs made from bricksand concrete

▪

Chipboard▪Plywood▪

ADVANTAGES

The long threaded rod of the togglefixings KD and KDH allows for usewith different board thicknesses andthick attachments, and offersmaximum flexibility.

▪

An integrated tension spring causesthe catch elements of the springtoggles KD 3+4 and KDH 3+4 toopen independently, thus allowingfor a simple installation.

▪

The wide transition beams ensure agood load distribution. This achievesa high load-bearing capacity.

▪

The nylon gravity toggle K54 allowsfor the use of standard wood andchipboard screws.

▪

APPLICATIONS

Pictures▪Lighting▪Light shelves▪Towel rails▪Mirror cabinets▪Light cabinets▪Wash basins and urinals (KM 10)▪Cable and pipe clips▪

FUNCTIONING

The gravity and spring toggle aresuitable for pre-positionedinstallation.

▪

When placed in the drill hole, thebearing elements of the gravity andspring toggles independently swingopen behind the board.

▪

The KM 10 is specially suited tofixing wash basins and urinals intoinstallation and cavity walls.

▪

No special installation tool required.For a fast and convenientinstallation.

▪

http://www.fischer.co.uk/ - 18/02/2014

Spring toggle KD 3+4, KDH 3+4

Cav

ity

fix

ing

s

2

TECHNICAL DATA

Spring toggle KD 3+4, KDH 3+4

Drill hole diameter Max. panelthickness

Thread Thread Thread

do dp Ø x length A A2Article name Art.-No. [mm] [mm] [mm]KD 3 080181 12 65 M 3 x 90KDH 3 080182 12 51 M 3 x 80KD 3 B 080192 12 65 M 3 x 90KD 4 080183 14 69 M 4 x 100KDH 4 080184 14 25 M 4 x 70KD 4 B 080193 14 69 M 4 x 100

308

6

TECHNICAL DATA

Gravity▪toggle▪KD 5 + 6 + 8

Gravity▪toggle▪KDH 5 + 6 + 8

Drill hole diameter Max. panel thickness Min. cavity depth Anchor length Thread Sales unit

do dp a l Ø x length

Item Art.-No. [mm] [mm] [mm] [mm] [mm] [pcs]

KD 5 080187 16 63 70 100 M 5 x 100 25KDH 5 080188 16 60 70 130 M 5 x 90 20KD 6 080185 16 63 70 100 M 6 x 100 25KDH 6 080186 16 60 70 130 M 6 x 100 20KD 8 080178 20 55 75 100 M 8 x 100 20KDH 8 080179 20 55 75 130 M 8 x 100 20

TECHNICAL DATA

Gravity▪toggle▪KM 10

Drill hole diameter Max. panel thickness Min. cavity depth Anchor length Screw Sales unit

do dp a l ds x ls

Item Art.-No. [mm] [mm] [mm] [mm] [mm] [pcs]

KM 10 050326 30 90 140 240 M 10 x 180 25

Type KD3 KD4 KD5 KD6 KD8 KDH3 KDH4 KDH5 KDH6 KDH8

Thread size [M] M3 M4 M5 M6 M8 M3 M4 M5 M8 M10Recommended loads in the respective base material Frec

2)

Max. possible recommended load3) [kN] 0,35 0,50 1,50 1,90 3,20 0,05 0,10 0,17 0,32 1,00Gypsum plasterboard 12,5 mm [kN] 0,05 0,10 0,15 0,20 0,25 0,05 0,10 0,15 0,20 0,25Oriented strand board 15 mm [kN] 0,35 0,40 0,40 0,50 0,60 - - - - -Oriented strand board 22 mm [kN] - - - 0,80 1,20 - - - - -

Toggle fixing KDHighest▪recommended▪loads1)▪for▪a▪single▪anchor.

1) Includes the safety factor 4.2) Valid for tensile load, shear load and oblique load under any angle.

3) If the failure of the base material is not possible.

LOADS

Cav

ity

fixi

ng

s

Gravity- and spring-toggle K, KD, KDH, KM

http://www.fischer.co.uk/ - 18/02/2014

Spring toggle KD 3+4, KDH 3+4

Cav

ity

fix

ing

s

3