Spring toggle KD 3+4, KDH 3+4 - Buildbase · 2014-11-24 · toggles KD 3+4 and KDH 3+4 to ......
3
http://www.fischer.co.uk/ - 18/02/2014 Spring toggle KD 3+4, KDH 3+4 Cavity fixings 1 The cavity fixing for different board thicknesses and large usage lengths BUILDING MATERIALS Gypsum plasterboard and gypsum fibreboards ▪ Cavity floor slabs made from bricks and concrete ▪ Chipboard ▪ Plywood ▪ ADVANTAGES The long threaded rod of the toggle fixings KD and KDH allows for use with different board thicknesses and thick attachments, and offers maximum flexibility. ▪ An integrated tension spring causes the catch elements of the spring toggles KD 3+4 and KDH 3+4 to open independently, thus allowing for a simple installation. ▪ The wide transition beams ensure a good load distribution. This achieves a high load-bearing capacity. ▪ The nylon gravity toggle K54 allows for the use of standard wood and chipboard screws. ▪ APPLICATIONS Pictures ▪ Lighting ▪ Light shelves ▪ Towel rails ▪ Mirror cabinets ▪ Light cabinets ▪ Wash basins and urinals (KM 10) ▪ Cable and pipe clips ▪ FUNCTIONING The gravity and spring toggle are suitable for pre-positioned installation. ▪ When placed in the drill hole, the bearing elements of the gravity and spring toggles independently swing open behind the board. ▪ The KM 10 is specially suited to fixing wash basins and urinals into installation and cavity walls. ▪ No special installation tool required. For a fast and convenient installation. ▪
Transcript of Spring toggle KD 3+4, KDH 3+4 - Buildbase · 2014-11-24 · toggles KD 3+4 and KDH 3+4 to ......
http://www.fischer.co.uk/ - 18/02/2014
Spring toggle KD 3+4, KDH 3+4
Cav
ity
fix
ing
s
1
The cavity fixing for different board thicknesses and large
usage lengths
BUILDING MATERIALS
Gypsum plasterboard and gypsumfibreboards
▪
Cavity floor slabs made from bricksand concrete
▪
Chipboard▪Plywood▪
ADVANTAGES
The long threaded rod of the togglefixings KD and KDH allows for usewith different board thicknesses andthick attachments, and offersmaximum flexibility.
▪
An integrated tension spring causesthe catch elements of the springtoggles KD 3+4 and KDH 3+4 toopen independently, thus allowingfor a simple installation.
▪
The wide transition beams ensure agood load distribution. This achievesa high load-bearing capacity.
▪
The nylon gravity toggle K54 allowsfor the use of standard wood andchipboard screws.
▪
APPLICATIONS
Pictures▪Lighting▪Light shelves▪Towel rails▪Mirror cabinets▪Light cabinets▪Wash basins and urinals (KM 10)▪Cable and pipe clips▪
FUNCTIONING
The gravity and spring toggle aresuitable for pre-positionedinstallation.
▪
When placed in the drill hole, thebearing elements of the gravity andspring toggles independently swingopen behind the board.
▪
The KM 10 is specially suited tofixing wash basins and urinals intoinstallation and cavity walls.
▪
No special installation tool required.For a fast and convenientinstallation.
▪
http://www.fischer.co.uk/ - 18/02/2014
Spring toggle KD 3+4, KDH 3+4
Cav
ity
fix
ing
s
2
TECHNICAL DATA
Spring toggle KD 3+4, KDH 3+4
Drill hole diameter Max. panelthickness
Thread Thread Thread
do dp Ø x length A A2Article name Art.-No. [mm] [mm] [mm]KD 3 080181 12 65 M 3 x 90KDH 3 080182 12 51 M 3 x 80KD 3 B 080192 12 65 M 3 x 90KD 4 080183 14 69 M 4 x 100KDH 4 080184 14 25 M 4 x 70KD 4 B 080193 14 69 M 4 x 100
308
6
TECHNICAL DATA
Gravity▪toggle▪KD 5 + 6 + 8
Gravity▪toggle▪KDH 5 + 6 + 8
Drill hole diameter Max. panel thickness Min. cavity depth Anchor length Thread Sales unit
do dp a l Ø x length
Item Art.-No. [mm] [mm] [mm] [mm] [mm] [pcs]
KD 5 080187 16 63 70 100 M 5 x 100 25KDH 5 080188 16 60 70 130 M 5 x 90 20KD 6 080185 16 63 70 100 M 6 x 100 25KDH 6 080186 16 60 70 130 M 6 x 100 20KD 8 080178 20 55 75 100 M 8 x 100 20KDH 8 080179 20 55 75 130 M 8 x 100 20
TECHNICAL DATA
Gravity▪toggle▪KM 10
Drill hole diameter Max. panel thickness Min. cavity depth Anchor length Screw Sales unit
do dp a l ds x ls
Item Art.-No. [mm] [mm] [mm] [mm] [mm] [pcs]
KM 10 050326 30 90 140 240 M 10 x 180 25
Type KD3 KD4 KD5 KD6 KD8 KDH3 KDH4 KDH5 KDH6 KDH8
Thread size [M] M3 M4 M5 M6 M8 M3 M4 M5 M8 M10Recommended loads in the respective base material Frec
2)
Max. possible recommended load3) [kN] 0,35 0,50 1,50 1,90 3,20 0,05 0,10 0,17 0,32 1,00Gypsum plasterboard 12,5 mm [kN] 0,05 0,10 0,15 0,20 0,25 0,05 0,10 0,15 0,20 0,25Oriented strand board 15 mm [kN] 0,35 0,40 0,40 0,50 0,60 - - - - -Oriented strand board 22 mm [kN] - - - 0,80 1,20 - - - - -
Toggle fixing KDHighest▪recommended▪loads1)▪for▪a▪single▪anchor.
1) Includes the safety factor 4.2) Valid for tensile load, shear load and oblique load under any angle.
3) If the failure of the base material is not possible.
LOADS
Cav
ity
fixi
ng
s
Gravity- and spring-toggle K, KD, KDH, KM
http://www.fischer.co.uk/ - 18/02/2014
Spring toggle KD 3+4, KDH 3+4
Cav
ity
fix
ing
s
3
