About us:SOURABH GROUP is a professionally managed group

of companies providing one stop solution in all types of HEAT TREATMENTS since 1997.

Year 1997: ‘Sourabh Surface Treatment’ was established.

Year 2001: ‘Sourabh Inductotherm’ was established.Year 2006: ‘Sourabh Heat Treatment’ was established.

We are certified as ISO 9001:2008.

About the Director:

Mr. M.M.Mahindrakar Mr. M.M.Mahindrakar has done B.E in Metallurgical Engineeringand did MBA in Marketing,having 15 years of industrial Experience.

Mr. M.M. Mahindrakar Director

Our services:Nitriding/Sursulf/TuffridingCase hardeningHardening and temperingCarbo Nitriding

Our plants are equipped with:Liquid Nitriding FurnacesInduction Hardening Machines

Sealed Quench Furnaces

Nitriding ProcessLiquid Nitriding is carried out at 570

degree Celsius.The part which requires high wear

resistance, corrosion resistance and close dimensional tolerance are Nitrided.

Our Nitriding Capacity: 150kg parts per batch. We have 3 furnaces.

We Nitrided:LOP Gear,Crankshaft,Clutch Plate,Intermediate Gear,Fuelpump Gear,Rocker Arm Shaft,Armature Shaft,Holder Plate,Ejector pin,Core pin,Shot sleeve,Drive Gear,Fare-meter Shaft,Gear Selector etc.

Liquid Nitriding FurnacesElectrically Heated Furnace 450mm x 1250mm (1 no.)Electrically Heated Furnaces 500mm x 1250mm (2 nos.)

Case Hardening Process‘Our case hardening’ set up includes one pre

heating, Two Sealed Quench Furnaces, one Washing Machine and Two Tempering Machine, with each 650 kg capacity.

It has the ability to Case Harden, Carbo-Nitride and Harden the parts in it.The set up has SCADA Software.If required, data of each batch is available at

any time.

We do Case Hardening for:All Speed Gears of Three Wheeler Kick Shaft,

Push Rod, Drive shaft etc.

We do Carbo-Nitriding for:• JW Lever, Clutch Plates, Re-enforcement Plate, Screw.

We do hardening and tempering for:• Rotor ,Stem, Bolts etc.

Process for Induction Hardening:In this process, Parts are heated with electrical

induction where high frequency current is passed through copper tube coil and due to induction eddy current passes through the part. As parts have self electrical resistance, they get heated to 850-900 degree Celsius and the part is quenched.

Here medium carbon steel is used.

‘Thread Softening’ can also be done with this machine.

Our Machine Capacity:High Frequency 350 KHZ, 20 KW.Medium Frequency 50 KHZ, 30 KW.

We do ‘Induction Hardening’ for:•For Rod Shift, Armature Shaft, Drive Shaft, Hub Pin, Pinion etc.

Vibro Cleaning:Our Gala Precision made ‘Vibro Cleaning

Machine’ takes care of the perfect cleaning.It has 35 kg capacity and ceramic media is

used for cleaning.

Parts we clean:•Lever clutch plate, Re-enforcement Plate etc.

Testing FacilityRockwell hardness testers (3 nos.)Brinell hardness tester (1 no.)Vickers hardness tester (1 no.)Microvickers hardness tester (1 no.)Sample preparation machines: cutoff

machine, belt polishing machine, mounting machine , double disk polishing machine.

Utilities:Diesel generator set (180KVA)

Screw compressor (15 HP)Cooling towersReciprocating compressor.

Our esteemed customer 1) Kirloskar Oil Engines2) Endurance technology3) Sanjeev Auto Parts pvt. Ltd.4) Starways Engineers5) Varroc Engg. Pvt Ltd.6) Siddhi Forge Pvt.Ltd. Etc.

Contact Us:SOURABH HEAT TREATMENT Plot no. M-69, M.I.D.C Waluj, 431136 Mob no.9922096111SOURABH INDUCTOTHERM Plot no. M 108/10,M.I.D.C Waluj,431136 Mob no.9922096111 Email id: m1m2mahindrakar@gmail.com

website: www.sourabhtreatment.com