Post on 26-Dec-2015
SAP Implementation
Business Blueprint
S3-010 – Cost Controlling
© SAP 2008 / Page 2
Table of Contents
Cost Controlling Controlling Area Cost Element Accounting Cost Element Master Cost Element Categories Cost Objects Business Transaction in CO Controlling (CO) Number Range Re-posting of Actual Cost Overhead Cost Allocation Cost Allocation Method Cost Planning
Cost Controlling
© SAP 2008 / Page 3
Cost Controlling Area
Cost Controlling Area represents the cost accounting environment where costs and revenues are managed, and internal managerial reports are generated. OTEL will have one Controlling area 1000. This provides a standardize profitability analysis across company within the corporation. Also, profit centers can be share for company codes within this controlling area1000.
Cost Controlling
Cost Element Accounting
Cost Element Accounting is the area of cost accounting where you track and structure the costs incurred during a settlement period. It is thus not an accounting system as such, but rather a detailed recording of data that forms the basis for cost accounting.
Each business transaction that involves costs updates the CO component with detailed information on the cost element and on the account assignment object, e.g. cost center. Each external transaction for data flows directly through the G/L Account in Financial Accounting module ( = Cost Element in Cost Controlling module) to the corresponding account assignment object, e.g. cost center, internal order (Cost object in Cost Controlling module).
© SAP 2008 / Page 4
Cost Controlling
Cost Element Master Data
A cost element describe the origin of costs. A primary cost element whose costs originate outside of CO and accrual costs that are used
only for controlling purposes. You must create the primary cost elements in Financial Accounting (FI) as G/L accounts
before you can create them in Management Accounting (CO). To be able to post to a primary cost element (such as freight costs and salary costs), you
require an object in Management Accounting (such as a cost center in Cost Controlling module) to identify the origin of the costs.
Secondary cost elements are used exclusively in Management Accounting to identify internal cost flows such as assessments or settlements.
Secondary cost elements do not have corresponding G/L accounts in Financial Accounting (FI) and are only defined in Management Accounting (CO).
© SAP 2008 / Page 5
Cost Controlling
Cost Element Categories
A cost element category is the classification of cost elements according to their usage or origin. It determines whether you can post to a cost element directly or indirectly.
Direct posting: You post a fixed amount to an account by specifying the account number. You can post directly to all primary cost elements.
Indirect posting: The system determines the account automatically at the time of posting. You can not enter the account number with the posting transaction. You can only post indirectly to secondary cost elements.
© SAP 2008 / Page 6
Cost Controlling
Cost ObjectsPost to a primary cost element from FI (Financial Accounting) to CO (Cost Controlling), you
requires an cost object in Management Accounting (Cost Controlling module) to identify the
origin of the costs. Cost Center and Internal Order are cost objects which to be used in OTEL.
Cost Center Cost centers are organizational units within a controlling area that represents the functional
department of cost incurrence.
Internal Order An internal order is used to monitor parts of the costs and revenues contributed by sales
teams.
© SAP 2008 / Page 7
Order Type Description Number from Number To Nature
SAL Salesman A ZZZZZZZZZZ Statistical Order
CDHCorporate
Department HeadCDH0001 CDH9999
Statistical Order
LDHLocal Department
HeadLDH0001 LDH9999
Statistical Order
Cost Controlling
The main business transactions in Cost Controlling
Primary cost posting These are postings that occur in CO when expenses accounts are posted to the G/L in the FI
Module.
Actual Cost Allocations These are the distribution of postings from one cost center (the cost sender) to another or a
group of cost centers (the cost receiver).
Cost Center Planning (Budgeting) This is the process of entering budget figures for department expenses.
Plan Cost Allocations This is the same as the actual cost allocation but the figures being distributed are the budget
figures rather than the actual postings.
© SAP 2008 / Page 8
Cost Controlling
Controlling (CO) Number Range
For every posting in CO the SAP System generates a numbered document. The document numbers are unique to each controlling area, since each number is assigned only once.
CO, there are no legal requirements for a continuous assignment of document numbers.
© SAP 2008 / Page 9
Transaction Group From To
Primary Postings (e.g. Direct posting from FI) 1000000000 1999999999
Planning Transaction (e.g. Budgeting & planning for P/L) 2000000000 2999999999
Assessment , Distribution, Order Settlement (Internal) 3000000000 3999999999
Other Transactions (e.g. CO Reposting) 4000000000 4999999999
Remarks: Planning Transaction cannot be reversed. Number archiving is necessary if the document numbers are all used.
Cost Controlling
Re-posting Actual Cost and Revenues Manually
Incorrect posting of costs and revenues can be corrected with the re-posting function in cost center accounting. This enables users to amend specific line items from CO documents and provide management with a clear audit trail when reviewing adjusted CO postings.
© SAP 2008 / Page 10
Cost Controlling
Overhead Cost Allocation
Costs are initially posted to a “common” or “shared” cost center during the month, and at the month end these costs are allocated to respective cost centers based on the allocation basis. Costs can be allocated against reposting or cost allocation cycle. Defining the cost allocation cycle, there are two major types of allocation method in SAP which are “Distribution” and “Assessment” respectively.
The following are defined in the allocation cycle: - Sender cost center Receiving cost center Allocation basic such as fixed percentage, statistical key figures, etc Sender primary cost element Receiving secondary cost element if using cost assessment allocation method
© SAP 2008 / Page 11
Cost Controlling
Cost Allocation Method
Distribution “Distribution” is used to allocate the primary cost of a cost center. The original cost element
(that is, the primary cost element) is retained.
Assessment Assessment” is a method of allocating primary and secondary costs. The original cost
element are assigned cumulatively, or in groups, to assessment (secondary) cost elements.
© SAP 2008 / Page 12
Cost Controlling
Statistical Key Figures
Statistical key figures serve as a basic for internal allocations and as reference in the key figures analysis framework. It can be defined as either fixed values or total values. Key figures defined as fixed values are valid as of the posting period, and in all subsequent posting periods of the fiscal year. Statistical key figures use as tracing factor (cost driver such as floor area, number of employee, etc) for the portion of costs for the individual receiver cost centers.
© SAP 2008 / Page 13
© SAP 2007 / Page 14
Cost Controlling
Cost Planning Version
Cost Planning in OTEL involves entering plan figures for departmental cost, statistical key figures for a particular cost center of particular planning period. It will form the basis for measuring efficiency and also act a performance control indicator for cost control. This will enable monthly expense variance reports to be generated for management decision making.
Currently there have four planning versions will be defined in OTEL. The planning values will be manually keyed into the SAP by cost centers by cost element grouping through Excel interface.
Plan Version Description
Z01 Annual Budget
Z02 Forecast 1
Z03 Forecast 2
Z04 Forecast 3
© SAP 2007 / Page 15
Cost Controlling
Cost Planning Layout
Planning Layout A planning layout is a user-defined planning screen. The planning layout
determines the header, lead column (e.g. cost element) and value column (e.g. actual cost) of the form. It will be defined in the realization stage of project.
Copyright 2009 SAP AG. All Rights Reserved
No part of this publication may be reproduced or transmitted in any form or for any purpose without the express permission of SAP AG. The information contained herein may be changed without prior notice.
Some software products marketed by SAP AG and its distributors contain proprietary software components of other software vendors.
Microsoft, Windows, Outlook, and PowerPoint are registered trademarks of Microsoft Corporation.
IBM, DB2, DB2 Universal Database, OS/2, Parallel Sysplex, MVS/ESA, AIX, S/390, AS/400, OS/390, OS/400, iSeries, pSeries, xSeries, zSeries, z/OS, AFP, Intelligent Miner, WebSphere, Netfinity, Tivoli, and Informix are trademarks or registered trademarks of IBM Corporation in the United States and/or other countries.
Oracle is a registered trademark of Oracle Corporation.
UNIX, X/Open, OSF/1, and Motif are registered trademarks of the Open Group.
Citrix, ICA, Program Neighborhood, MetaFrame, WinFrame, VideoFrame, and MultiWin are trademarks or registered trademarks of Citrix Systems, Inc.
HTML, XML, XHTML and W3C are trademarks or registered trademarks of W3C®, World Wide Web Consortium, Massachusetts Institute of Technology.
Java is a registered trademark of Sun Microsystems, Inc.
JavaScript is a registered trademark of Sun Microsystems, Inc., used under license for technology invented and implemented by Netscape.
MaxDB is a trademark of MySQL AB, Sweden.
SAP, R/3, mySAP, mySAP.com, xApps, xApp, SAP NetWeaver and other SAP products and services mentioned herein as well as their respective logos are trademarks or registered trademarks of SAP AG in Germany and in several other countries all over the world. All other product and service names mentioned are the trademarks of their respective companies. Data contained in this document serves informational purposes only. National product specifications may vary.
The information in this document is proprietary to SAP. No part of this document may be reproduced, copied, or transmitted in any form or for any purpose without the express prior written permission of SAP AG.
This document is a preliminary version and not subject to your license agreement or any other agreement with SAP. This document contains only intended strategies, developments, and functionalities of the SAP® product and is not intended to be binding upon SAP to any particular course of business, product strategy, and/or development. Please note that this document is subject to change and may be changed by SAP at any time without notice.
SAP assumes no responsibility for errors or omissions in this document. SAP does not warrant the accuracy or completeness of the information, text, graphics, links, or other items contained within this material. This document is provided without a warranty of any kind, either express or implied, including but not limited to the implied warranties of merchantability, fitness for a particular purpose, or non-infringement.
SAP shall have no liability for damages of any kind including without limitation direct, special, indirect, or consequential damages that may result from the use of these materials. This limitation shall not apply in cases of intent or gross negligence.
The statutory liability for personal injury and defective products is not affected. SAP has no control over the information that you may access through the use of hot links contained in these materials and does not endorse your use of third-party Web pages nor provide any warranty whatsoever relating to third-party Web pages
© SAP 2007 / Page 16