Post on 12-Apr-2017
Michael Chung165 Heather Lane
Palo Alto, CA 94303 (650) 493-9228 (H)
(408) 666-7833 (C) mchung60@hotmail.com
Objective: Physical Design and Integration area
Expertise: Strong experience in physical design and chip integration. Tape-out 20 large-scale chips by using various physical design tools.
Skills: Synopsis ICC Advance Place/Route tool, Cadence Advance Place/Route tool, PrimeTime, Calibre, Apache power tool, Makefile, Perl, TCL, Verilog, and Skill languages.
Experience: Physical Design Contractor Volt s Inc. (2015) Physical design: Implement P/R Universal North bridge block from gate level input,
block floor plan, placement, CTS, placement optimization, timing optimization, routing and ECO steps with TSMC 16nm technology. - Successfully implemented cross bar congestion intense tiles by grouping and
region utilization strategy to resolve local congestion issues. Physical Design Staff, Engineer AMD Inc. (2000 – present) Physical design: Created Place and Route flow and implement P/R from gate level
input, block floor plan, placement, CTS, placement optimization, timing optimization, routing and ECO steps with TSMC 28nm/20nm technology. - Successfully implemented the tiles including analog intense tiles with manually
hand editing.- Successfully implemented cross bar congestion intense tiles by grouping and
region utilization strategy to resolve local congestion issues.- Successfully implemented memory control tiles with complicated clock tree by define and refine clocks tree to meet clock specification and finish P/R to boost
tile performance. Top level switching fabric irregular tile Place/Route.
- Executed floorplanning, and created placement def to create semi-custom manual placement, and output def to do physical awareness synthesis.- Placed timing critical logics by group/region method and script placement.- Executed scan chain re-order, stitch, and output def to back DFT team.- Executed Clock Tree and Scan Clock Tree synthesis, and optimization.
- Executed Routing, and optimization to fix all the routing violation.
Physical verification : Created and verification: Defined and executed chip integration, verification flow from chip construction, and construction quality
checking, IP qualification, and layers checking, OD filling, Metal filling and verification process
(DRC/LVS/Density/DFM/Antenna checking), IP checking to tape out ATI very complex ATI graphical chip. Successfully taped-out Tahiti, Hawaii, Fiji, and Xbox chip with over 6 billion stransistors counts with TSMC 28nm/20nm technology.
Fullchip power verification: Performed full chip Apache power analysis- Input files preparation: included customer block power model preparation, and
full chip timing window generation.- Executed Apache soc full chip power analysis, and analysis results to provide
feedback to tiles owner.
Physical Library management and development: Developed library management program and library QA program to qualify library quality.Included ports checking, cell names uniquification, delay table monotone, and customer blocks drc/lvs qualifications.
Created Makefile base automatic hard IP flow. - Defined and setup RTL to gds flow from synthesis , floor plan, pin assignment, P/R strategy and implemented the flow to get quality blocks.
Interface CAD vendors and Foundry - Worked with CAD vendor AE, and R&D engineer to improve Place/Route performance, and DRC/LVS performance. - Filled out foundry MT form, and worked with foundry inspecting mask , and tape out database to make sure successfully tape out . Physical CAD Engineer, Chameleon Inc. (1998-2000) Managed physical library by using Skill language. Performed physical library characterization, verification, and managements. CAD support, and maintain block Place/Route, integration, and physical verification flow. Education: Master of Electrical Engineering, University of Utah, Salt Lake City Bachelor of Engineering Science, National Tsing-Hua University, Taiwan
Activity: Member of IEEEReference: Available upon request