Post on 10-Jun-2022
SKU 48111Ideal for those with lathes up to 12”/300mm swing. Takes all the accessory jaws, although only those designed for smaller work are recommended for use on the Precision Midi. Available in a dedicated thread version.
SKU 48202, 48232Ideal for those with lathes up to 14”/360mm swing. Provides high geared chuck power for smaller lathes. Takes all the accessory jaws, although only those designed for smaller work are recommended for use on the G3. Available in insert and direct threaded versions.
SKU 23055Ideal for those with lathes up to 20”/508mm swing. Brilliant all-round greaed chuck for majority of users. Takes all the accessory jaws. Available in both insert and direct threaded versions.
SKU 8012All NOVA Infinity Chucks can access your existing conventional NOVA Accessory Jaws with the simple addition of the NOVA Infinity Retro Fit Kit (SKU 8200 - additional purchase) Upgrade your current older NOVA chuck to Infinity Quick Change technology with the Upgrade Jaw Slide Kit (8100 - additional purchase)
SKU 13055Ideal for those with lathes with 24”/609mm swing and larger. Takes all accessory jaws, but also has one extra special PowerGrip jaws dedicated only to the Titan.
PRECISION MIDI
GENERAL CHUCK ACCESSORIES
NOVA ACCESSORY JAWS
NOVA G3SuperNOVA2 INFINITY QUICK
CHANGE CHUCKNOVA TITAN
www.teknatool.comNOVA: Smart Tools, Powerful Solutions
Bowl Jaw #1SKU 8301
Bowl Jaw #3SKU 8303
Saw Tooth #2SKU 8312
Upgrade KitSKU 8100
Retro-fit KitSKU 8200
Smooth Column #1SKU 8321
Saw Tooth #1SKU 8311
Bowl Jaw #2SKU 8302
For more information visitwww.novainfinitychuck.com
NOVA Soft JawsSKU 6021
Able to be cut & custom moulded by the user to their specific holding requirements.Markless holding- the nylon material holds most woods without marking.
Mini 20mm JawsSKU JS20N
For work that is below the 25mm Jaws.
10 in 1 Chuck GaugeSKU 10051
Handy gauge enables you to work out your NOVA dovetails easily with many of the useful measuring & gauging functions used in the woodturning workshop.
Woodworm ScrewSKU 10006
Standard with most chucks (check with your local reseller or www.teknatool.com).
NOVA Dovetail ChiselSKU 6008
Ensures a dovetail with a sharp, clean edge to match-up exactly to the dovetail contour of the NOVA Accessory Jaws.
NOVA Universal SpannerSKU 23079
Features over 4 different NOVA specific functions in one tool.
Chuck Spur CenterSKU NCSC
Never take the chuck off of your lathe.Allows you to quick mount a spur center on your chuck.For the bowl turner who also does spindle work.
Faceplate RingSKU 6000, 6001, 6002
Three Sizes Available:50mm (2”) fits 50mm jaws, Faceplate diamter 3”100mm (4”) fits 100mm jaws, Faceplate diameter 5”130mm (5”) fits 130mm jaws, Faceplate diamter 6.25”
75mm (3”) Long Nosed JawsSKU 6017
A 50mm 2” rise above their mounting base means very long reach deep inside of bowls.
Mini Spigot JawsSKU 6026
Powerful & rigid grip for small spigot turning.For small bowl work.
Mini Step JawsSKU 6025
Gripping bowls in expansion mode.3 step sizes provide optimum gripping.
Step Jaw SetSKU JS75DT
Great for gripping the base of footed bowls in the contracting mode.
25mm (1”) Jaw SetSKU JS25N
One of our most popular & convenient jaws for small bowl & small spigot turning work. Ideal for mini/midi lathe work.
Pin Jaw Set (1”)SKU JSPIN
These extended jaws are designed to act like a pin chuck- expanding into a pre-bored hole.
Spigot Jaw 35mm (1.375”)SKU JS-SP35
Provide strong contracting grip to unsupported spigot turning applications.
35mm (1.35”) Bowl JawsSKU 6019
The 35mm bowl jaws fit perfectly into the current jaw range, picking up a small gap left between the 35mm & the 50mm.
Spigot Jaw 45mm SKU JS-SP45
Grips to unsupported spigot turning.
50mm (2”) Bowl JawsSKU JS50N
These jaws are standard with all NOVA chucks (excluding Infinity Chuck)
100mm Jaw SetSKU JS100N
Designed for expanded dovetail, reverse dovetail for gripping.
75mm (3”) Bowl JawsSKU 6014
The dovetail walls are 3x the thickness of conventional jaw types for rugged work holding for larger/heavier bowl work.
70mm JawsSKU JS70N
Perfect for bowl & spigot projects.
130mm Jaw SetSKU JS130N
Handle large work 750mm in diameter.
Powergrip Jaw SetSKU JSPN
Powerful jaw for large spigot/ hollow turning.
Cole Jaw SetSKU JSCOLE
Suitable for lathes with minimum 12”/300mm swing diameter.
Mini Cole Jaw SetSKU 6006
Suitable for lathes with minimum 8” swing diameter.