PMS-2A ADJUSTABLE PAPER METERING SYSTEM Above Ground Standard Features: Hopper is accessible from one of

three positions Heavy duty drum style metering

wheel with rotating spike profile Allows for bulk loading Can be integrated with the

shredder’s control panel Variable speed drives allow the

operator to adjust the feed rate Photo eye included

◊ Available for Series 3 Industrial Paper Shredders ◊

Shown above with an AMS-T3 box dumper and an AMS-4000 paper shredder.

Automate the feeding to maximize the throughput on your

industrial shredder, regardless of the manufacturer.

800-634-8981 info@ameri-shred.com

SPECIFICATION CHART

Metering

Drum

3 HP, Fixed Speed with

Adjustable Heights

Dual

Rubber

Belts

3 HP Upper, 1 HP Lower,

Each with Variable Speed

Controls

Hopper 1,500 Lb. Capacity

Voltage 208/230/460v

Weight 5,000 Lbs.

Dimensions 218” L x 68” W x 110”H

Page 1

PMS-2 PAPER METERING SYSTEM Above Ground Standard Features: Steel Belt Hopper is accessible from 3 sides Heavy duty drum style metering

wheel with staggered teeth for more consistent feeding

Provides for bulk loading Can be integrated with the

shredder’s control panel Variable speed drive allows the

operator to adjust the feed rate

◊ Available for Series 4 & 5 Industrial Paper Shredders ◊

SHOWN ABOVE:

Custom Cart Tipper (Not Required)

Feeding a PMS-2 Paper Metering System

Feeding a Series 4 Industrial Paper Shredder

Discharging onto a Baler Feed Conveyor

Feeding an Automatic Tie Horizontal Baler

800-634-8981 info@ameri-shred.com

SPECIFICATION CHART

Motor 3 HP TEFC

Belt Width 30” Wide

Belt Speed 12.5 - 50 FPM

Cleat Height 2-1/2” H on 20” Centers

Voltage 208/230/460v

Hopper 1,500 Lb. Capacity

Weight 8,500 Lbs.

Dimensions 13’ L x 6’ W x 8’ H

Page 2