PMS 2A ADJUSTA LE PAPER METERING SYSTEM Above Ground · Feeding a PMS-2 Paper Metering System...
2
PMS-2A ADJUSTABLE PAPER METERING SYSTEM Above Ground Standard Features: Hopper is accessible from one of three posions Heavy duty drum style metering wheel with rotang spike profile Allows for bulk loading Can be integrated with the shredder’s control panel Variable speed drives allow the operator to adjust the feed rate Photo eye included ◊ Available for Series 3 Industrial Paper Shredders ◊ Shown above with an AMS-T3 box dumper and an AMS-4000 paper shredder. Automate the feeding to maximize the throughput on your industrial shredder, regardless of the manufacturer. 800-634-8981 [email protected] SPECIFICATION CHART Metering Drum 3 HP, Fixed Speed with Adjustable Heights Dual Rubber Belts 3 HP Upper, 1 HP Lower, Each with Variable Speed Controls Hopper 1,500 Lb. Capacity Voltage 208/230/460v Weight 5,000 Lbs. Dimensions 218” L x 68” W x 110”H Page 1
Transcript of PMS 2A ADJUSTA LE PAPER METERING SYSTEM Above Ground · Feeding a PMS-2 Paper Metering System...
PMS-2A ADJUSTABLE PAPER METERING SYSTEM Above Ground Standard Features: Hopper is accessible from one of
three positions Heavy duty drum style metering
wheel with rotating spike profile Allows for bulk loading Can be integrated with the
shredder’s control panel Variable speed drives allow the
operator to adjust the feed rate Photo eye included
◊ Available for Series 3 Industrial Paper Shredders ◊
Shown above with an AMS-T3 box dumper and an AMS-4000 paper shredder.
Automate the feeding to maximize the throughput on your
industrial shredder, regardless of the manufacturer.
800-634-8981 [email protected]
SPECIFICATION CHART
Metering
Drum
3 HP, Fixed Speed with
Adjustable Heights
Dual
Rubber
Belts
3 HP Upper, 1 HP Lower,
Each with Variable Speed
Controls
Hopper 1,500 Lb. Capacity
Voltage 208/230/460v
Weight 5,000 Lbs.
Dimensions 218” L x 68” W x 110”H
Page 1
PMS-2 PAPER METERING SYSTEM Above Ground Standard Features: Steel Belt Hopper is accessible from 3 sides Heavy duty drum style metering
wheel with staggered teeth for more consistent feeding
Provides for bulk loading Can be integrated with the
shredder’s control panel Variable speed drive allows the
operator to adjust the feed rate
◊ Available for Series 4 & 5 Industrial Paper Shredders ◊
SHOWN ABOVE:
Custom Cart Tipper (Not Required)
Feeding a PMS-2 Paper Metering System
Feeding a Series 4 Industrial Paper Shredder
Discharging onto a Baler Feed Conveyor
Feeding an Automatic Tie Horizontal Baler
800-634-8981 [email protected]
SPECIFICATION CHART
Motor 3 HP TEFC
Belt Width 30” Wide
Belt Speed 12.5 - 50 FPM
Cleat Height 2-1/2” H on 20” Centers
Voltage 208/230/460v
Hopper 1,500 Lb. Capacity
Weight 8,500 Lbs.
Dimensions 13’ L x 6’ W x 8’ H
Page 2
