Post on 27-Feb-2021
PLASMA CUTTING
The new series of Torcheswithout High Frequency Start
PTE-80HPTE-80MPTE-100HPTE-100MPTS-120HPTS-120M
Higher performances
Cleaner cut
Faster speed
Patent Pending
TEC.MO. s.r.l. Via Rio Fabbiani 8 - 40067 RASTIGNANO - BOLOGNA - ITALY E-mail: tecmo@tecmo.it
Patent PendingEASY FITEASY FITEASY FITEASY FITEASY FIT
With “EASY FITEASY FITEASY FITEASY FITEASY FIT”A revolutionary solution to save time and money
NEWCoaxial Cable
2016-11-A-PTE
2
plasma cutting torches
2123412341234
3
plasma cutting torches 2016-11-A-PTE
3
EASY FIT
EASY FIT
EASY FIT
EASY FIT
NEWCoaxial Cable
IEC 60974-7
Patent Pending
Patent PendingEASY FITEASY FITEASY FITEASY FITEASY FIT
EASY FITEASY FITEASY FITEASY FITEASY FIT
Torch head & leadsItem# Description Code#
1 PTE-80H Hand torch head EASY FIT, w/ handle & parts. 09801
2 PTE-100H Hand torch head EASY FIT, w/ handle & parts. 09701
3 PTS-120H Hand torch head EASY FIT, w/ handle & parts. 03801
4 PTE-80M Machine torch head EASY FIT, w/positioning tube & parts 09811
5 PTE-100M Machine torch head EASY FIT, w/positioning tube & parts 09711
6 PTS-120M Machine torch head EASY FIT, w/positioning tube & parts 03811
7 Lead Assembly, 6m (20 ft) EASY FIT, Coaxial Cable 09781FX
w/ Euro-Connector8 Extension, 6m (20 ft), complete with EASY FIT,Coaxial Cable 05285FX9 EASY FIT Central Connection, Machine Side 05265
+ 6m (20ft)
1
2
3
4
5
6
7
8
9
2016-11-A-PTE
4
plasma cutting torches
4
PTEPTEPTEPTEPTE-80H-80H-80H-80H-80HTechnical Data PTE-80H
Current : 30-80 AmpsDuty Cycle: 80 Amps 60%Gas: Air/N2Gas Pressure: 65-75 psi (4.4-5.0 bar)Gas Flow: 230 scfh (110 lpm)Pilot : Electrode to Tip (18-22A)Ignition: Without HF
IEC 60974-7
Back StrikingPatent Pending
For the correct operation please use:3-Ways Solenoid Valve, inside orifice2.7-3.0 mm - (0.106-0.118 inches)
1a
1
2a
3
4
5 6
7
1b
8
12 13
14 14
15 16
2bEASY FIT
EASY FIT
EASY FIT
9
10 11
17
18
19
14
4
5
plasma cutting torches 2016-11-A-PTE
5
PTEPTEPTEPTEPTE-80H-80H-80H-80H-80HReplacement Parts PTE-80H
Torch partsItem# Description Code #
1 PTE-80H Hand torch head EASY FIT, w/ handle & parts. 09801
1a O-Ring 51620.60
1b Cooling Tube 09800.42
2a Switch 07301.20
2b Safety Tab 09605.42
3 Electrode, Back Striking 52558
4 Gas Distributor 60027
5 Tip, Contact Cutting, ø 0.9, 30-40A, Back Striking 51310.09
6 Tip, Cutting, ø 1.0, 40-50A, Back Striking 51311.10
Tip, Cutting, ø 1.1, 50-60A, Back Striking 51311.11
Tip, Cutting, ø 1.2, 60-70A, Back Striking 51311.12
Tip, Cutting, ø 1.3, 70-80A, Back Striking 51311.13
7 Retaining Cap 60510
8 Double Pointed Spacer (for use with item. 6 only) 60434
N/S Wrench for electrode 60368
9 Lead Assembly, 6m (20 ft) EASY FIT, Coaxial Cable 09781FX
w/ Euro-Connector
10 Extension, 6m (20 ft), complete with EASY FIT,Coaxial Cable 05285FX
11 EASY FIT Central Connection, Machine Side 05265
AccessoriesItem# Description Code#12 Contact Tip, ø 1.0, 40-50A, Back Striking 51311S.10
Contact Tip, ø 1.1, 50-60A, Back Striking 51311S.11
Contact Tip, ø 1.2, 60-70A, Back Striking 51311S.12
Contact Tip, ø 1.3, 70-80A, Back Striking 51311S.13
13 Tip, Gouging, 80A, Back Striking 51311G.16
14 Shield Cup Body 60511
15 Shield Cap, Hand 60504
16 Shield Cap, Gouging 60508
17 Extended Electrode 52558L
18 Extended Shielded Tip, ø 1.0, 40-50A, 51311L.10
Extended Shielded Tip, ø 1.1, 50-60A, 51311L.11
Extended Shielded Tip, ø 1.2, 60-70A, 51311L.12
Extended Shielded Tip, ø 1.3, 70-80A, 51311L.13
19 Extended Shield Cap, Hand 60504L
N/S Circle Cutting Attachment 51853
Torches with different cable covers andcentral connector available on request.
Standard Layout
NEWCoaxial Cable
Patent Pending
Air or N2
Monogas
EASY FITEASY FITEASY FITEASY FITEASY FITPatent Pending
2016-11-A-PTE
6
plasma cutting torches
6
PTEPTEPTEPTEPTE-80M-80M-80M-80M-80MTechnical Data PTE-80M
Current : 30-80 AmpsDuty Cycle: 80 Amps 60%Gas: Air/N2Gas Pressure: 65-75 psi (4.4-5.0 bar)Gas Flow: 230 scfh (110 lpm)Pilot : Electrode to Tip (18-22A)Ignition: Without HF
Back StrikingPatent Pending
For the correct operation please use:3-Ways Solenoid Valve, inside orifice2.7-3.0mm - (0.106-0.118 inches)
2
1b
1
3
4
5
6
1c
10
11
12
IEC 60974-7
Patent Pending
Patent PendingEASY FITEASY FITEASY FITEASY FITEASY FIT
1a
EASY FIT
EASY FIT
EASY FIT
7
8
9
7
plasma cutting torches 2016-11-A-PTE
7
Replacement Parts PTE-80M
Torch parts
Item# Description Code #
1 PTE-80M Machine torch head EASY FIT, w/positioning tube & parts 09811
1a Machine torch head 09810
1b O-Ring 51620.60
1c Cooling Tube 09800.42
2 Fiberglass Positioning Tube 07218
3 Electrode, Back Striking 52558
4 Gas Distributor 60027
5 Tip, Cutting, ø 1.0, 40-50A, Back Striking 51311.10
Tip, Cutting, ø 1.1, 50-60A, Back Striking 51311.11
Tip, Cutting, ø 1.2, 60-70A, Back Striking 51311.12
Tip, Cutting, ø 1.3, 70-80A, Back Striking 51311.13
6 Retaining Cap 60510
N/S Wrench for electrode 60368
7 Lead Assembly, 6m (20 ft) EASY FIT, Coaxial Cable 09781FX
w/ Euro-Connector
8 Extension, 6m (20 ft), complete with EASY FIT,Coaxial Cable 05285FX
9 EASY FIT Central Connection, Machine Side 05265
Accessories
Item# Description Code #
10 Contact Tip, ø 1.0, 40-50A, Back Striking 51311S.10
Contact Tip, ø 1.1, 50-60A, Back Striking 51311S.11
Contact Tip, ø 1.2, 60-70A, Back Striking 51311S.12
Contact Tip, ø 1.3, 70-80A, Back Striking 51311S.13
11 Shield Cup Body 60511
12 Shield Cap, Machine 60506
PTEPTEPTEPTEPTE-80M-80M-80M-80M-80M
Torches with different cable covers andcentral connector available on request.
Standard Layout
NEWCoaxial Cable
Air or N2
Monogas
2016-11-A-PTE
8
plasma cutting torches
8
IEC 60974-7
Technical Data PTE-100H
Current : 30-100 AmpsDuty Cycle: 100 Amps 60%Gas: Air/N2Gas Pressure: 70-80 PSI (4.6-5.0 bar)Gas Flow: 420 SCFH (200 lpm)Pilot : Electrode to Tip (18-22A)Ignition: Without HF
PTEPTEPTEPTEPTE-100H-100H-100H-100H-100H
For the correct operation please use:3-Ways Solenoid Valve, inside orifice3.5-4.0mm - (0.138-0.157 inches)
21
1a
1
1b
3
4 5
6 7 8
9 10
11
2a
4 45
15 16 17
18 18
19 20
2b
EASY FIT
EASY FIT
EASY FIT
12
1314
4 5
23 24
18
25 26
22
9
plasma cutting torches 2016-11-A-PTE
9
Replacement Parts PTE-100H
Torch partsItem# Description Code#
1 PTE-100H Hand torch head EASY FIT, w/ handle & parts. 097011a O-Ring 51190.411b Cooling Tube 09700.482a Switch 07301.202b Safety Tab 09605.423 Electrode, Back Striking 525564 Gas Distributor, 30-70A 600255 Gas Distributor, 80-100A and Gouging 600266 Tip, Contact Cutting, ø 0.9, 30-40A, Back Striking 51245.097 Tip, Cutting, ø 1.0, 40-50A, Back Striking 51246.10
Tip, Cutting, ø 1.1, 50-60A, Back Striking 51246.11Tip, Cutting, ø 1.2, 60-70A, Back Striking 51246.12
8 Tip, Cutting, ø 1.4, 80-90A, Back Striking 51248.14Tip, Cutting, ø 1.5, 100A, Back Striking 51248.15
9 Retaining Cap, 30-70A 6050010 Retaining Cap, 80-100A 6050111 Double Pointed Spacer (for use with item. 7 and 8 only) 60444
N/S Wrench for electrode 6036812 Lead Assembly, 6m (20 ft) EASY FIT, Coaxial Cable 09781FX
w/ Euro-Connector13 Extension, 6m (20 ft), complete with EASY FIT,Coaxial Cable 05285FX14 EASY FIT Central Connection, Machine Side 05265
AccessoriesItem# Description Code #15 Contact Tip, ø 1.0, 40-50A, Back Striking 51276.10
Contact Tip, ø 1.1, 50-60A, Back Striking 51276.11Contact Tip, ø 1.2, 60-70A, Back Striking 51276.12
16 Contact Tip, ø 1.4, 80-90A, Back Striking 51278.14Contact Tip, ø 1.5, 100-100A, Back Striking 51278.15
17 Tip, Gouging, 100A, Back Striking 51278G.2218 Shield Cup Body 6050219 Shield Cap, Hand, 40-70A 6050420 Shield Cap, Hand, 80-100A 6050521 Shield Cap, Gouging 60508
22 Extended Electrode 52556L23 Extended Shielded Tip, ø 1.0, 40-50A, 51276L.10
Extended Shielded Tip, ø 1.1, 50-60A, 51276L.11Extended Shielded Tip, ø 1.2, 60-70A, 51276L.12
24 Extended Shielded Tip, ø 1.4, 80-90A, 51278L.14Extended Shielded Tip, ø 1.5, 100A, 51278L.15
25 Extended Shielded Cap, Hand, 40-70A 60504L26 Extended Shielded Cap, Hand, 80-100A 60505L
N/S Circle Cutting Attachment 51864
PTEPTEPTEPTEPTE-100H-100H-100H-100H-100H
Torches with different cable covers andcentral connector available on request.
Standard Layout
Air or N2
Monogas
NEWCoaxial Cable
Patent Pending
Patent PendingEASY FITEASY FITEASY FITEASY FITEASY FIT
Back StrikingPatent Pending
2016-11-A-PTE
10
plasma cutting torches
10
Technical Data PTE-100M
Current : 30-100 AmpsDuty Cycle: 100 Amps 60%Gas: Air/N2Gas Pressure: 70-80 PSI (4.6-5.0 bar)Gas Flow: 420 SCFH (200 lpm)Pilot : Electrode to Tip (18-22A)Ignition: Without HF
PTEPTEPTEPTEPTE-100M-100M-100M-100M-100M
For the correct operation please use:3-Ways Solenoid Valve, inside orifice3.5-4.0mm - (0.138-0.157 inches)
Back StrikingPatent Pending
2
1
1c
34
5
13 14
8
9
1b
4 5
7
6
15
16
IEC 60974-7
Patent Pending
Patent PendingEASY FITEASY FITEASY FITEASY FITEASY FIT
1a
EASY FIT
EASY FIT
EASY FIT
10
11
12
sd
11
plasma cutting torches 2016-11-A-PTE
11
Replacement Parts PTE-100M
Torch parts
Item# Description Code#
1 PTE-100M Machine torch head EASY FIT, w/positioning tube & parts 09711
1a Machine torch head 09710
1b O-Ring 51190.41
1c Cooling Tube 09700.48
2 Fiberglass Positioning Tube 07218
3 Electrode, Back Striking 52556
4 Gas Distributor, 30-70A 60025
5 Gas Distributor, 80-100A 60026
6 Tip, Cutting, ø 1.0, 40-50A, Back Striking 51246.10
Tip, Cutting, ø 1.1, 50-60A, Back Striking 51246.11
Tip, Cutting, ø 1.2, 60-70A, Back Striking 51246.12
7 Tip, Cutting, ø 1.4, 80-90A, Back Striking 51248.14
Tip, Cutting, ø 1.5, 100A, Back Striking 51248.15
8 Retaining Cap, 30-70A 60500
9 Retaining Cap, 80-100A 60501
N/S Wrench for electrode 60368
10 Lead Assembly, 6m (20 ft) EASY FIT, Coaxial Cable 09781FX
w/ Euro-Connector
11 Extension, 6m (20 ft), complete with EASY FIT,Coaxial Cable 05285FX
12 EASY FIT Central Connection, Machine Side 05265
Accessories
Item# Description Code#
13 Contact Tip, ø 1.0, 40-50A, Back Striking 51276.10
Contact Tip, ø 1.1, 50-60A, Back Striking 51276.11
Contact Tip, ø 1.2, 60-70A, Back Striking 51276.12
14 Contact Tip, ø 1.4, 80-90A, Back Striking 51278.14
Contact Tip, ø 1.5, 100A, Back Striking 51278.15
15 Shield Cup Body 60502
16 Shield Cap, Machine 60506
PTEPTEPTEPTEPTE-100M-100M-100M-100M-100M
Torches with different cable covers andcentral connector available on request.
Standard Layout
NEWCoaxial Cable
Air or N2
Monogas
2016-11-A-PTE
12
plasma cutting torches
12
IEC 60974-7
Technical Data PTS-120H
Current : 40-120 AmpsDuty Cycle: 120 Amps 60%Gas: Air/N2Gas Pressure: 70-80 PSI (4.6-5.5 bar)Gas Flow: 630 SCFH (295 lpm)Pilot : Electrode to Tip (18-22A)Ignition: Without HF
PTSPTSPTSPTSPTS-120H-120H-120H-120H-120H
For the correct operation please use:3-Ways Solenoid Valve, inside orifice4.5-5.5mm - (0.178-0.217 inches)
1a
3 4
5 6
7
2a2b
17
STAND-OFF CONTACT GOUGING
5 6 6 6
8 9 10 14 15 16 22
11 12
13
18 18 18
19 20 21 23
3 4 4 4
EASY FIT
EASY FIT
30
31
EASY FIT
32
40A80A
80A120A
40A80A
80A100A
100A120A
100A120A
40A80A
80A120A
EXTENDED
3 4
24 25
17 18
28 29
26 27
13
plasma cutting torches 2016-11-A-PTE
13
PTSPTSPTSPTSPTS-120H-120H-120H-120H-120H
Torches with different cable covers andcentral connector available on request.
Standard Layout
NEWCoaxial Cable
Air or N2
Monogas
Patent PendingEASY FITEASY FITEASY FITEASY FITEASY FIT
Replacement Parts PTS-120HTorch partsItem# Description Code#
1 PTS-120H Hand torch head EASY FIT, w/ handle & parts. 038011a O-Ring 02800.602a Switch 07301.202b Safety Tab 09605.423 Gas Distributor, 40-80A 60043E
Gas Distributor, 40-80A Maximum Life 600434 Gas Distributor, 80-120A 60044E
Gas Distributor, 80-120A Maximum Life 600445 Electrode, 40-80A 526756 Electrode, 80-120A 526767 Tip, Cutting, 40A 514028 Tip, Cutting, 60A 514039 Tip, Cutting, 80A 5140410 Tip, Cutting, 100A 51408
Tip, Cutting, 120A 51408T11 Retaining Cap, 40-80A 6049312 Retaining Cap, 80-120A 6049413 Double Pointed Spacer 60434
14 Contact Tip, Cutting, 40A 51405.10Contact Tip, Cutting, 60A 51405.12Contact Tip, Cutting, 80A 51405.14
15 Contact Tip, Cutting, 100A 5140616 Contact Tip, Cutting, 120A 51406T17 Shield Cup Body, 40-80A 6049518 Shield Cup Body, 80-120A 6049619 Shield Cap, Hand, 40-80A 51981/TD20 Shield Cap, Hand, 80-100A 51983/TD21 Shield Cap, Hand, 100-120A 51988
22 Contact Tip, Gouging, 100-120A 51409.2423 Shield Cap, Gouging, 100-120A 51989G
24 Extended Electrode, 40-80A 52675L25 Extended Electrode, 80-120A 52676L26 Extended Shielded Tip, Cutting, 40A 51405L.10
Extended Shielded Tip, Cutting, 60A 51405L.12Extended Shielded Tip, Cutting, 80A 51405L.14
27 Extended Shielded Tip, Cutting, 100A 51406L.15Extended Shielded Tip, Cutting, 120A 51406L.18
28 Extended Shield Cap, Hand, 40-80A 60505L29 Extended Shield Cap, Hand, 80-120A 51983L
30 Extension, 6m (20 ft), complete with EASY FIT,Coaxial Cable 05285FX31 EASY FIT Central Connection, Machine Side 0526532 Lead Assembly, 6m (20 ft) EASY FIT, Coaxial Cable 09781FX
w/ Euro-Connector
AccessoriesN/S Circle Cutting Attachment (for use with item# 11 or 12) 51865
2016-11-A-PTE
14
plasma cutting torches
14
PTSPTSPTSPTSPTS-120M-120M-120M-120M-120MTechnical Data PTS-120M
Current : 40-120 AmpsDuty Cycle: 120 Amps 60%Gas: Air/N2Gas Pressure: 70-80 PSI (4.6-5.5 bar)Gas Flow: 630 SCFH (295 lpm)Pilot : Electrode to Tip (18-22A)Ignition: Without HF
For the correct operation please use:3-Ways Solenoid Valve, inside orifice4.5-5.5mm - (0.178-0.217 inches)
IEC 60974-7
EASY FIT
EASY FIT
21
22
EASY FIT
23
STAND-OFF CONTACT
1514
1b
2
13 4
5 6
7 8 9 10
11
12
1a
13
3 4 4
5 6 6
171716
201918
40A80A
80A120A
40A80A
80A100A
100A120A
15
plasma cutting torches 2016-11-A-PTE
15
PTSPTSPTSPTSPTS-120M-120M-120M-120M-120M
Torches with different cable covers andcentral connector available on request.
Standard Layout
NEWCoaxial Cable
Air or N2
Monogas
Patent PendingEASY FITEASY FITEASY FITEASY FITEASY FIT
Replacement Parts PTS-120M
Torch parts
Item# Description Code #
1 PTS-120M Machine Torch Head EASY FIT, 03811
w/positioning tube & parts
1a Machine Torch Head 03810
1b O-Ring 02800.60
2 Fiberglass Positioning Tube 07218
3 Gas Distributor, 40-80A 60043E
Gas Distributor, 40-80A Maximum Life 60043
4 Gas Distributor, 80-120A 60044E
Gas Distributor, 80-120A Maximum Life 60044
5 Electrode, 40-80A 52675
6 Electrode, 80-120A 52676
7 Tip, Cutting, 40A 51402
8 Tip, Cutting, 60A 51403
9 Tip, Cutting, 80A 51404
10 Tip, Cutting, 100A 51408
Tip, Cutting, 120A 51408T
11 Retaining Cap, 40-80A 60493
12 Retaining Cap, 80-120A 60494
13 Contact Tip, Cutting, 40A 51405.10
Contact Tip, Cutting, 60A 51405.12
Contact Tip, Cutting, 80A 51405.14
14 Contact Tip, Cutting, 100A 51406
15 Contact Tip, Cutting, 120A 51406T
16 Shield Cup Body, 40-80A 60495
17 Shield Cup Body, 80-120A 60496
18 Shield Cap, Machine, 40-80A 51982/TD
19 Shield Cap, Machine, 80-100A 51984/TD
20 Shield Cap, Machine, 100-120A 51989
21 Extension, 6m (20 ft), complete with EASY FIT,Coaxial Cable 05285FX
22 EASY FIT Central Connection, Machine Side 0526523 Lead Assembly, 6m (20 ft) EASY FIT, Coaxial Cable 09781FX
w/ Euro-Connector
12345678901234567890123456789012123456789012345678901234567890121231234567890123456789012345678901212345678901234567890123456789012123123456789012345678901234567890121234567890123456789012345678901212312345678901234567890123456789012123456789012345678901234567890121231234567890123456789012345678901212345678901234567890123456789012123
1234567890123456789012345678901212345678901234567890123456789012123123456789012345678901234567890121234567890123456789012345678901212312345678901234567890123456789012123456789012345678901234567890121231234567890123456789012345678901212345678901234567890123456789012123
12341234123412341234123412341234123412341234123412341234123412341234123412341234123412341234123412341234123412341234123412341234123412341234123412341234123412341234123412341234123412341234123412341234123412341234123412341234123412341234123412341234123412341234123412341234123412341234123412341234123412341234123412341234123412341234123412341234123412341234123412341234123412341234123412341234
12341234123412341234123412341234123412341234123412341234123412341234123412341234123412341234123412341234123412341234123412341234123412341234123412341234123412341234123412341234123412341234123412341234123412341234123412341234123412341234123412341234123412341234123412341234123412341234123412341234123412341234123412341234123412341234123412341234123412341234123412341234123412341234123412341234
Notes