www.ColumbiaWeather.com

Pegasus EXTM Weather Station

with Weather MasterTM Software

Grand Island Fire Department

www.ColumbiaWeather.com

Pegasus EX Weather Station System Components

• Weather Sensors– Wind speed and direction– Temperature and humidity in shield– Barometric pressure (in control module)

• Tripod Mast

• Carry Case with battery pack and transceivers

• WeatherMaster Software

www.ColumbiaWeather.com

System SetUp

• Site Selection - level ground, minimal interference

• Loosely attach radiation shield with temperature and humidity probes

• Place wind sensor atop mast - tighten

www.ColumbiaWeather.com

Mast Set Up

• Holding tripod vertical, position legs and insert locking pins

www.ColumbiaWeather.com

Align Wind Direction

• Locate magnetic North on compass

• Point front marked tripod leg toward North

www.ColumbiaWeather.com

Secure with Tie Down Kit

• Screw ground auger and attach

www.ColumbiaWeather.com

• Connect cable to wind sensors

• Raise the mast

• Align arrows and insert locking pin.

• Secure Radiation Shield

www.ColumbiaWeather.com

Install Control Module

• Secure Control Module and connect sensor cables

• Check battery connections (red/black)

www.ColumbiaWeather.com

WeatherMaster Software

• Monitor weather conditions

• Collect weather data

www.ColumbiaWeather.com

Interface CAMEO/ALOHA “Weather Master software is very easy to use. We can see instant weather

data on our office mounted display screen or use it with our Air Plume program with the touch of a button.”

~ Lt. Dave Pearson, Oregon Hazmat Team #9

www.ColumbiaWeather.com

Some Other Interesting Applications•David Schultz Airshows•Wildland Firefighting•Resource Center for Homeland Security (shown left at Kentucky Derby)

www.ColumbiaWeather.com