Post on 21-Jan-2018
70-417MCSA Windows Server 2012
Pass Upgrading Your Skills to MCSA Windows Server 2012
Microsoft Corporation is an American multinational corporation headquartered in Redmond, Washington, that
develops, manufactures, licenses, and supports and sells computer software, electronics and consumer computers
and personal services.
Its best known products are the Microsoft Windows line of operating systems, Microsoft Office and Internet
Explorer Web browser.
Its flagship products are hardware consoles Xbox games and range of tablets Microsoft Surface.
It is the software company in the world measured by revenues larger.
It is also one of the most valuable companies in the world
Skills measured
This exam measures your ability to accomplish the
technical tasks listed below. The percentages indicate the
relative weight of each of the main issues under
discussion. The higher the percentage, the more questions
you are likely to see on that content area on the exam.
70-417Upgrading Your Skills to MCSA Windows Server 2012
70-417 - Upgrading Your Skills to MCSA Windows Server 2012 Probing the test is not easy to pass. Before trying
to take the exam, you must have a complete knowledge of this. For certification 70-417 - Upgrading Your Skills
to MCSA Windows Server 2012 then you can get help from actual exam material for 70-417 - Upgrading Your
Skills to MCSA Windows Server 2012 examination. Here are the latest questions and answers 70-417 - Upgrading
Your Skills to MCSA Windows Server 2012
Pass Upgrading Your Skills to MCSA Windows Server 2012
70-417Upgrading Your Skills to MCSA Windows Server
2012
You can going to get same questions in your Configuring
Advanced Windows Server 2012 R2 Services
exam. By The Help of.
Question No 1:
You have 30 servers that run Windows Server 2012 R2. All of the servers are backed up daily by using
Windows Azure Backup. You need to perform an immediate backup of all the servers to Windows Azure Backup.
Which Windows PowerShell cmdlets should you run on each server?
A. Get-OBPolicy | Start-OBBackup
B. Get-WBPolicy | Start-WBBackup
C. Start-OBRegistration | Start-OBBackup
D. Get-WBBackupTarget | Start-WBBackup
Answer: A
Question No 2:
You have a server named Server1 that runs Windows Server 2012 R2. You install the File and Storage Services server
role on Server1.From Windows Explorer, you view the properties of a folder named Folder1 and you discover that the
Classification tab is missing. You need to ensure that you can assign classifications to Folder1 from Windows Explorer
manually. What should you do?
A. Install the File Server Resource Manager role service.
B. From Folder Options, clear Hide protected operating system files (Recommended).
C. Install the Share and Storage Management Tools.
D. From Folder Options, select the Always show menus.
Answer: A
Question No 3:
Your network contains an Active Directory domain named contoso.com. The domain contains a file server
named Server1 and a domain controller named DC1. All servers run Windows Server 2012 R2.A Group Policy object
(GPO) named GPO1 is linked to the domain.Server1 contains a folder named Folder1. Folder1 is shared as Share1.You
need to ensure that authenticated users can request assistance when they are denied access to the resources on
Server1.Which two actions should you perform? (Each correct answer presents part of the solution. Choose two.)
A. Enable the Enable access-denied assistance on client for all file types policy setting for GPO1.
B. Configure the Customize message for Access Denied errors policy setting of GPO1.
C. Install the File Server Resource Manager role service on DC1.
D. Install the File Server Resource Manager role service on Server1.
E. Assign the Read Attributes NTFS permission on Folder1 to the Authenticated Users group.
Answer: A, D
Question No 4:
Your network contains an Active Directory domain named contoso.com. All servers run Windows Server 2012 R2. You
are creating a central access rule named Test Finance that will be used to audit members of the Authenticated users
group for access failure to shared folders in the finance department. You need to ensure that access requests are
unaffected when the rule is published. What should you do?
A. Set the Permissions to Use the following permissions as proposed permissions.
B. Add a Resource condition to the current permissions entry for the Authenticated Users principal.
C. Set the Permissions to Use following permissions as current permissions.
D. Add a User condition to the current permissions entry for the Authenticated Users principal.
Answer: A
Question No 5:
You deploy an Active Directory Federation Services (AD FS) 2.1 infrastructure. The infrastructure uses Active Directory as
the attribute store. Some users report that they fail to authenticate to the AD FS infrastructure. You discover that only
users who run third-party web browsers experience issues. You need to ensure that all of the users can authenticate to
the AD FS infrastructure successfully. Which Windows PowerShell command should you run?
A. Set-ADFSProperties -SSOLifetime 1:00:00
B. Set-ADFSProperties -AddProxyAuthenticationRules None
C. Set-ADFSProperties -ExtendedProtectionTokenCheck None
D. Set-ADFSProperties -ProxyTrustTokenLifetime 1:00:00
Answer: C
Question No 6:
Your network contains a perimeter network and an internal network. The internal network contains an Active Directory
Federation Services (AD FS) 2.1 infrastructure. The infrastructure uses Active Directory as the attribute store. You plan to
deploy a federation server proxy to a server named Server2 in the perimeter network. You need to identify which value
must be included in the certificate that is deployed to Server2.What should you identify?
A. The name of the Federation Service
B. The name of the Active Directory domain
C. The FQDN of the AD FS server
D. The public IP address of Server2
Answer: C
Question No 7:
Your network contains an Active Directory domain named contoso.com. The domain contains servers named Server1
and Server2 that run Windows Server 2012 R2. Server1 has the Active Directory Federation Services server role
installed.Server2 is a file server. Your company introduces a Bring Your Own Device (BYOD) policy. You need to ensure
that users can use a personal device to access domain resources by using Single Sign-On (SSO) while they are
connected to the internal network. Which two actions should you perform? (Each correct answer presents part of the
solution. Choose two.)
A. Enable the Device Registration Service in Active Directory.
B. Publish the Device Registration Service by using a Web Application Proxy.
C. Configure Active Directory Federation Services (AD FS) for the Device Registration Service.
D. Install the Work Folders role service on Server2.
E. Create and configure a sync share on Server2.
Answer: A. C
Question No 8:
Your network contains two servers named Server1 and Server2 that run Windows Server 2008 R2. Server1 and Server2
are nodes in a failover cluster named Cluster1. The network contains two servers named Server3 and Server4 that run
Windows Server 2012 R2. Server3 and Server4 are nodes in a failover cluster named Cluster2.You need to move all of
the applications and the services from Cluster1 to Cluster2. What should you do first from Failover Cluster Manager?
A. On a server in Cluster2, click Migrate Roles.
B. On a server in Cluster2, click Move Core Cluster Resources, and then click Select Node...
C. On a server in Cluster1, configure Cluster-Aware Updating.
D. On a server in Cluster2, click Move Core Cluster Resources, and then click Best Possible Node.
Answer: A
Question No 9:
Your network contains a Hyper-V host named Hyperv1. Hyperv1 runs Windows Server 2012 R2.Hyperv1 hosts four
virtual machines named VM1, VM2, VM3, and VM4. All of the virtual machines run Windows Server 2008 R2.You need
to view the amount of memory resources and processor resources that VM4 currently uses. Which tool should you use
on Hyperv1?
A. Task Manager
B. Windows System Resource Manager (WSRM)
C. Hyper-V Manager
D. Resource Monitor
Answer: C
Question No 10:
You have a server named Server1 that runs Windows Server 2012 R2.
You create a custom Data Collector Set (DCS) named DCS1.
You need to configure Server1 to start DCS1 automatically when the network usage exceeds 70 percent.
Which type of data collector should you create?
A. A performance counter alert
B. A performance counter data collector
C. An event trace data collector
D. A configuration data collector
Answer: A
Quality
and Value
100%
Guarantee
to Pass
Exam
Answers
Verified by
Experts
Based on
Real Exam
Scenarios
3500+
Exams
Dumps
24/7
Customer
Support
on Mail
and Live
Chat
100%
Lowest
Price
Guarantee
Why Chose Us
------------------------------------------------------------------------------------------------------
70-417MCSA Windows Server 2012
Pass Upgrading Your Skills to MCSA Windows Server 2012