Post on 22-Nov-2014
The PRYSMIAN solution for the integration of telecommunications networks on high voltage overhead lines
OPGW Cable System
TELECOM
OPGW-PRYSMIAN
Overhead optical fibre cable systems have become a key factor
in telecommunications networks used by operators and power
utilities.
Due to the fact that no civil works are required and the rights
of way have already been established, it is possible to minimise
costs and, most importantly, the time required to begin
network operation.
Prysmian offers its customers a complete range of overhead optical systems:
OPGW Cable SystemsComposite optical ground wire system for installation on high voltage
electric lines.
Self-supporting cable system (ADSS)Self-supporting optical cable system for all types of lines: electric
lines, overhead distribution lines for railways, etc.
Lashed cable systemOptical cable system lashed to the ground wire or the phase cable on
the electric lines.
OPPC cable systemComposite optical phase cable system, for high voltage electric lines
up to 135 kV.
2
Overhead optical fibre cable systems
> High reliability and demonstrated experience High reliability supported by over 110,000 km. of cables installed, with systems in operation since 1983 in more than 70 countries in the five continents.
> Supply of a full system Easy to install since Prysmian OPGW includes all components which the system requires from end to end:
·OPGW cables and terminal cables ·Joint boxes, optical distribution frame and connection accessories ·Components for securing the cable to the high voltage towers ·Engineering and installation services, with turn key projects ·Drum lengths up to 10.000 m.
> Manufacturing capabilitiesThe OPGW-PRYSMIAN cable is produced at Prysmian’s OPGW Centre of Excellence in Vilanova i la Geltrú (Spain) and also in Sorocaba (Brazil) and Wuxi (China) facilities. With these three factories Prysmian can deliver cable to any part of the world, with very high flexibility and in quantities synchronized to the timing of the project.
> Aluminium Tube TechnologyThe extruded aluminium tube technology used by Prysmian in the manufacture of OPGW Composite Optical Ground Cables has demonstrated its high quality and reliability, with fully satisfactory installations in operation for more than 20 years. Furthermore, the ongoing research in new materials and the experience gained ensure the continuous development of our products.
Customers who choose the Prysmian OPGW system can be sure that their decision will lead to a successful experience during installation and operation. The main advantages of Prysmian OPGW are the following:
3
Introducction
OPGW-PRYSMIAN Cable System, the “never wrong” decision
(*) AS= Aluminium clad steel. AA= Aluminium alloy GS= galvanized steel
Wind,temperature,ice Increasedattenuationorbreakageduetoelongationand/orcompression.
· Loosefibreprotectionwithexcellentcontroloffibreextralength,whichallowselongationorcompressionofthecablewithoutaffectingthefibres
Rainandmoisture Increasedattenuationduetowaterpenetrationintheopticalfibre
· Intrinsicradialsealingoftheextrudedaluminiumtube.·Opticalcoreprotectedbysealinggel.
· Designwithhighaluminiumcontent.· SelectionofAS,AAorGS(*)wires.· Thermalprotectionofcore.· Suitablepreformingofwirestopreventcabledismountingifwirebreakageoccurs.
Lineshort-circuit
Impactoflightning
Increasedattenuationandbreakageofthewires
Hydrogengenerationinmetalstructure
Increasedattenuationduetohydrogenabsorptionintheopticalfibre.
·Corefilledwithhydrogen-absorbentgel
Solutions adopted in the Prysmian designWorking conditions Risk for the optical fibre and cable
Prysmian Aluminium Tube OPGW Design
Corrosion Increasedattenuationandbreakageofthewires · AluminiumtubeincontactwithAAandAS(*)wiresforhighlycorrosiveareas
OPGW-PRYSMIAN
Damper page 12
Terminal cablepage 8
Complete solution for the integration of telecommunications networks on high voltage overhead lines
4
OPGW-PRYSMIANComposite optical ground wire
pages 6-7
Down lead clamppage 13
Optical distribution frame (ODF)
page 11
Joint boxespage 10
Suspension assemblypage 12
Tension assemblypage 13
Optical fibrespage 9
Engineering & installationpage 15
Referencespages 16-17
Complete solution for the integration of telecommunications networks on high voltage overhead lines
5
OPG
W-PR
YSM
IAN
Cable System
Quality and testingpage 14
OPGW-PRYSMIAN
Single layerThe PRYSMIAN-OPGW SINGLE LAYER cables are the most widely used cables. Their design is fully adapted to the most common electric line needs. They offer excellent value for money.
Structure
Metal protection:
Extruded aluminium tube.
Armour with choice of three wires aluminium clad steel.
aluminium alloy. galvanized steel.
Hydrogen-absorbent optical core:
Optical fibres.
One or more tubes with loose fibre protection, sealed with moisture-proof gel.
Thermal protection tape.
>
>
>
>
·>
··
Prysmian StandardOPGW00A35OPGW16A41OPGW28C58OPGW03A35OPGW09A42OPGW12A39OPGW20B50OPGW32E48OPGW40H49OPGW46J52OPGW50J67OPGW18A48OPGW27D50OPGW10A32OPGW17A47OPGW24C43OPGW33F44OPGW37F61OPGW60L70OPGW51E67OPGW62J72OPGW07N97
Fibre Count (Max)
121216242424242424242436364848484848486496
288
Diameter (mm)10,011,612,810,310,911,212,013,214,014,615,011,812,711,011,712,413,313,716,015,116,220,8
Weight (kg/km)
349412580347416386500475490523670484503316471429450610696650719789
UTS (kN)5564915374638164626597797241746359908998
10382
Short Circuit (kA2 sec)
203558232630416891
11611036672935447783
15176
138198
NOTE:ThedesignsaboveareonlyasamplingoftheoptionsavailablefromPRYSMIAN.Pleasecontactusforacabledesignedtoyourexactspecifications.
Product Details
6
PRYSMIAN-OPGW Composite Optical Ground Cables
The PRYSMIAN-OPGW DOUBLE LAYER cables are used when the requirements of our customers specify a high ultimate load and/or high short-circuit current.
Double layer
7
Hydrogen-absorbent optical core:
Optical fibres.
Tubes with loose fibre protection, sealed with moisture-proof gel.
Thermal protection tape.
Metal protection:
Extruded aluminium tube.
Armour with choice of three wires: aluminium clad steel. aluminium alloy. galvanized steel.
Additional armour with choice of three wires: aluminium clad steel. aluminium alloy. galvanized steel.
Structure
>
>
>
>
>
>
···
···
Cables
Prysmian StandardOPGW53H60DOPGW59K65DOPGW66M59DOPGW90S86DOPGW94P81DOPGW97M116DOPGW20T172DOPGW56J64DOPGW86Q73DOPGW24U100D
Fibre Count (Max)
122424243236364848
144
Diameter (mm)15,315,916,619,019,418,722,015,618,622,4
Weight (kg/km)
600645585860812
11611716642729
1000
UTS (kN)
829374
1181021883059288
120
Short Circuit (kA2 sec)
111151175400237212386122278430
NOTE:ThedesignsaboveareonlyasamplingoftheoptionsavailablefromPRYSMIAN.Pleasecontactusforacabledesignedtoyourexactspecifications.
Product Details
PRYSMIAN-OPGW Composite Optical Ground Cables
OPGW-PRYSMIAN
These cables are used to connect the optical fibres of the OPGW cable at the end of the high voltage line to the optical distribution frame in the substation.
In all of these cables, Prysmian can offer a wide range of sheaths which respond to specific installation needs .
We supply the fire resistant Afumex® type, hydrocarbons resistant, termites resistant, etc.
Terminal Cable: EKDE
Terminal Cable: EKH9E
Terminal Cable: EKE
The EKH9E cables equipped with anti-rodent metal armour.
This armour must be connected to earth to prevent electric discharge when
secondary currents are generated.
The most widely used cable types are as follows:
The EKE cables, whose fully dielectric design prevents the generation of secondary
currents.
If there are rodents in the area, these cables should be installed in duct.
8
The EKDE cables whose fully dielectrc anti-rodent protecction, combines the
advantages of the two prior solutions.
Terminal Cables
Claddingdiameter 1250.7µm
Modefielddiameter at1310nm from9,20,4µm
Attenuation(*) at1310nm 0,36dB/kmmax. at1550nm 0,22dB/kmmax.
Chromaticdispersion at1310nm 2,8ps/(nm.km) from1285to1330nm 3,5ps/(nm.km) at1550nm 18ps/(nm.km) from1525to1575nm 20ps/(nm.km)
PMD(PolarisationModeDispersion)0.1ps/km
Single-mode of general application OPG LightOPG Light is a G.652 fibre optimized for OPGW networks, with: Better splicing performance. Lowest PMD in the market. Characterization in 4th window.
(ITU-T G.652)
Prysmian can supply its Magnilight ITU-T G.652 D for metro applications upon request.
The optical fibre of the cables supplied by Prysmian is manufactured in-house and is designed to provide optimum
transmission services. These fibres are used primarily in telecomunications networks characterised by long distance
links and high capacity.
Non zero dispersion shifted FreeLight®Fibre designed for DWDM applications. It is characterised by very low dispersion from 1530 to 1625 nm and a high effective area, which prevents the non-linear effects of high speed in this type of transmission, offering improved service in comparison to the previous fibres.
Cables
9
(*)Theattenuationvaluesindicatedareprovidedasanexample.Consultoursalesofficetodeterminethefibrecharacteristicswhicharemostappropriateforyourneeds.
Claddingdiameter 1251,0µm
Modefielddiameter at1550nm from9,2to10,0µm
Attenuation(*) at1550nm 0,25dB/kmmax. at1625nm 0,27dB/kmmax.
Chromaticdispersion from1530to1565nm from2,0to6,15ps/(nm.km) from1565to1625 from4,5to12,4ps/(nm.km)
PMD(PolarisationModeDispersion)0,5ps/km
(ITU-T G.655)
Optical Fibres
OPGW-PRYSMIAN
The EWMJ and EWJ joint boxes are especially designed to guarantee the maximum sealing, reliability and durability of the fibre optic cables connections. They are highly versatile, and can be used in OPGW systems as well as other types of optical wiring systems.
Configuration
Basic Configurations
Cable entrance 1 OPGW 1 OPGW 2 OPGW 3 OPGW 2 OPGW 3 OPGW 4 OPGW 2 plastic sheath
1 OPGW 1 plastic sheath 1 plastic sheath 2 plastic sheath 1 plastic sheath
EWMJ A B C D - - - H
EWJ A B C D E F G H
10
Structure
Box · aluminium alloy · anti-ageing neoprene coupling · cover secured by 4 stainless steel screws · clamp plate for central cable components
Joint organiser · capacity of up to 24 fusion joints per organiser · control minimum bending radius of fibres
Cable inlets · aluminium gland seal · cable anchored on armour · neoprene sealing rings (IP67) · aluminium stern for plastic sheath cable (in their case) · thermoretractile tube for plastic sheath cable sealing (in their case)
Cable securing · aluminium clamp systems adaptable to all diameter of cables
Outer protection · optional protection from sunbeams and other impacts
Vertical tower anchoring
>
>
>
>
>
>
Prysmian can supply any configuration requested.
Joint Boxes EWMJ, up to 96 splices Joint Boxes EWJ, up to 240 splices
Prysmian has a wide range of ODFs which provide suitable connection of the terminal cable to the transmission equipment.
11
Accessories and fi
ttings
The ODF includes all the necessary functions:
cable securing and grounding
housing of mechanical and/or fusion joints
connector/adapters termination
storage of fibre cords
>
>
>
>
Optical Distribution Frame (ODF)
Flexibility is obtained by the superposition of different optical
distribution modules, inside a 19”/ETSI standard cabinet.
The enclosures permit a capacity up to 47U, in wall mounted or
floor stand format.
The modules are designed for 12, 24 or 48 fibre capacity, fully
equipped with adapters and pigtails. The adapter type can be
choosen between the most common adapters in the market; FC,
SC, ST, E2000, etc..
The optical distribution frame ODF33 is a flexible and modular system that allows termination of a small number of cables
of low capacity up to a large number of cables of high capacity.
OPGW-PRYSMIAN
Assembly with reinforced suspension clamp and neoprene inner covering, especially designed for OPGW cables. Includes grounding clamps for tower connection.
Suspension assembly
ConfigurationAccording to the environmental conditions, length of span and types of cables it may be necessary to use extra protection rods (reinforced suspension assembly).The assembly components can be provided with optimum features in accordance with Client requirements.
Structure
12
Straight shackle - (Galvanized forged steel).
Twisted link - (Galvanized forged steel).
Parallel connection clamp - (Aluminium).
Armour grid suspension clamp - (Aluminium).
Preformed rods - (Aluminium alloy).
Grounding clamp - (Aluminium).
>
>
>
>
>
>
Structure
The dampers are used to absorb the cable vibrations. The number of dampers is determined by the environmental conditions, the distance between towers, the type of OPGW cable and the installation parameters.On request, Prysmian can calculate a customized vibration study.
Dampers
StructureSecuring clamp - (Aluminium alloy)
Messenger cable - (Galvanized steel wire).
Counterweights - (Galvanized forged steel).
>
>
>Stockbridge Damper
Spiral Vibration Damper
Solid PVC helical rod.>
13
Preformed tension assembly especially designed for OPGW cables. Includes grounding clamps for tower connection. When the distance between two anchor towers is greater than the maximum length of OPGW cable drums, there are special tension assemblies for installation in suspension towers, allowing a cable joint to be included.
Tension assembly
Straight shackle - (Galvanized forged steel).
Extension link- (Galvanized laminated steel).
Dead end - (Compression aluminium clad steel).
Thimble - (Cast galvanized steel).
Protection splice - (Compression aluminium clad steel).
Grounding clamp - (Aluminium).
Structure>
>
>
>
>
>
ConfigurationThere are three types of assemblies for installation in tension towers:
passing tension assembly: for intermediate towers.
splicing tension assembly: for towers with joint boxes.
final tension assembly: for final towers.
Also there are tension assemblies for suspension towers:
splicing tension assembly, for towers with joint boxes.
The assembly components can be provided with customized features in accordance with Client requirements.
>>>
>
Accessories and fi
ttings
Downlead clamp
Structure
Clamp - (Aluminium).
M-12- rod - (Galvanized steel).
Support body - (Galvanized steel).
Lock screw - (Stainless steel).
>
>
>
>
The downlead clamps are used to fix the cable to the tower in the down lead to the joint box.
Configuration
There are different types of clamps:
individual clamp, for a single cable.
standard clamp, for two cables, adaptable to all diameters.>>
OPGW-PRYSMIAN
14
Tensile machine (20t).
Sheave.
Crush. Impact.
CW Lighthing test (400C).
Salt fog test chamber.
(-40/85ºC) Climatic chamber.
Agreements with international laboratories allow to complete cable
qualification according to IEEE 1138 and/or IEC 60794.
Optical fibre parameters such cut-off wavelength, MFD, spectral
attenuation, chromatic dispersion and PMD can be measured.
The laboratory is also equiped with tensile machines for characterization
of metallic wires and plastic sheath.
Prysmian OPGW manufacturing plant are ISO 9001 and 14001 certified
and the quality assurance systems are managed accordingly.
>
>
>
>
>
>
>
Stress strain
Sheave test
Salt fog
Lighthing test
Quality and Testing
Prysmian has the following in-house OPGW testing facilities:
Prysmian, with more than 80 OPGW cable designs succesfully type-tested, has extensive experience in OPGW qualification. Additionally, our in-house laboratories certify that all our cables are manufactured in compliance with the design specifications. Prysmian’s manufacturing plants are fully ISO certified.
In order to ensure that the OPGW cables will operate successfully in a high voltage network, all aspects associated with the
implementation of this technology must be correctly analysed.
Services
15
Prysmian has designed global pre-sales and after-sales services to optimise the installation, operation and maintenance of these networks:
optimised design of cables and accessories
project engineering (calculation of spans, drum lengths, etc.)
definition of optical fibre
line survey. The cable parts, type and quantity of accessories, splice points, etc. are determined at this time supervision of installation, to ensure correct cable stringing and splicing
final certification (measurement of fibre attenuation) preparation of joints
turn key projects, including from the executive design to the acceptance protocol.
maintenance, providing the material required (instruments, repair units, etc.)
Prysmian has designed these services to adapt to the specific needs of each installation, thus optimising the resources of our customers.
Prysmian Live Line Installation Services
When there are severe restr ic t ions to planned outages , OPGW stringing in energized transmission systems becomes necessary. Prysmian masterizes the technology of OPGW installation in live line condition, offering a full range of services that bring to our customers the benefits of this new but safe technology.
Turn-key installation references
Prysmian has references of more than 13.000 km of cable installed in turn-key basis, of which more than 5.000 km were installed in live line conditions.
>
>
>
>
>
>
>
>
>
Engineering and Installation
OPGW-PRYSMIAN
The Prysmian Group began installation of OPGW systems in 1983. Since then our technology has been used by the following Customers throughout the world.
16
ETHIOPIAALBANIA JYOTI STRUC. (EEPCO)
ABB KEC INT. (EEPCO)ALGERIA BULGARIA GHANA
SONELGAZ ELECTROIMPEX (NEK) GNPCKAHRAKIB CANADA VRA
ARGENTINA SUNCOR HUNGARYALUSA–YPF CHECOSLOVAQUIA MVMINTESAR S.A. CEPS ICELANDLIMSA CHILE LANDSVIRKJUNPAN AMERICAN ENERGY B.BOSCH S.A. INDIASADE ENTEL APTRANSCOTECHINT INGENDESA POWER GRIDTEYMA-ABENGOA MINERA ESCONDIDA INDONESIATRANSENER SIGDO KOPPERS P.L.N.
AUSTRALIA CHINA IRAQPOWERLINK CHINA E.P.T., I&E CO. SOE
BANGLADESH EST CHINA E.P.F. E&T CO. ALBARQCOBRA GUANGDONG P.C.C. ITALY
BOLIVIA HUNAN TRADING CO. BASICTELSEIM INGENIERÍA NORTH CHINA E.G. ENELSIRTI NORTH EAST CHINA E.G. EDISONTEL
BRAZIL STATE POWER CORP. RODAABENGOA ZHEJIANG P.E.P. CO. VITROSELENIACELPA COLOMBIA IVORY COASTCEMIG ELECTRICAS DE MEDELLIN ABBCEEE ISA SOC. IVOIR. CABLESCHESF LA ALIANZA JORDANCOBELUX SIEMENS NEPCOCOPEL COSTA RICA KAZAKHASTANCTEEP ICE ASPMKEMBRATEL ECUADOR KEGOCELETRONORTE FUTURE OPTIC SYSTEMS POWER GRID CO.ELETROPAULO HIDROPAUTE KENYAELETROSUL TRANSELECTRIC KEN GENFURNAS EGYPT KUWAITPETROBRAS E.E.A. KEC INT. (MOE)
KINGDOM OF SAUDI ARABIA PAPUA NEW GUINEAELECTRICITY CORP. PNG POWER TAIWANSEC-C PARAGUAY THAI SOTO ENGINEERINSEC-E ADMINIST. NAC. ELEC. THAILANDSEC-W PERU EGATYANBU CORP. E.G.ELEC. SAN GABAN TUNEZYANPET PET.INF. PHILIPPINES JYOTI (STEG)
LEBANON NATIONAL POWER CORP. TURKEYÉLECTRICITÉ DU LIBAN SOUTHEM ENERGY MITAS
LIBYA TRANSCO TEIASDALING D.O.O. PORTUGAL UKRAINEKEC (GECOL) E i P (REN) TTC MARCONI
LITHUANIA QATAR UNITED ARAB EMIRATES
LIETUVO ENERGIJA NCC (KAHARAMAA) ADWEAMALAYSIA VOLTAGE ENG. (KAHARAMAA) FEWA
SESCO ROMANIA MEWTENAGA N.B. TRANSELECTRICA DEWA
MALI RUSSIA URUGUAYSOGEM FEDERAL GRID CO. UTE
MAURITANIA SOUTH AFRICA USAUTE MANANTALI ESKOM ENTERGY
MEXICO SPAIN GREAT RIVER ENERGYBESTEL ABENGOA MAGIC VALLEYCOMISION FEDERAL ELE. COBRA MID AMERICAN ENERGYLUZ Y FUERZA C. ELECNOR SCANA
MONGOLIA ENDESA WASHINGTON INT. GROUPBEIJING ENG.CO.B.P. (ER&DC) GAMESA WORLEY PARSONS
MOZAMBIQUE H.CANTABRICO VENEZUELAISOLUX IBERDROLA ABB
NICARAGUA IBERINCO PEDEVESASINTER ISOLUX SADEVEN HWC ANDINA
NIGERIA REE ZTE/CADAFEABB (PHCN) UNION FENOSA VIETNAMPIVOT ENG. (PHCN) SUDAN E.V.N.CI2000 (PHCN) MOHAN (NEC) YEMEN
NORWAY SWEDEN HYUNDAINEKS ELECTRIC SVENSKA KRAFTNÄT YUGOSLAVIA
OMAN SWITZERLAND EPSKEC (MEW) AET ZAMBIA
PAKISTAN SYRIA KALPATARU (ZESCO)GEODIS UK PEEGT ZIMBABWEICC SCOT ZESA
The Prysmian Group began installation of OPGW systems in 1983. Since then our technology has been used by the following Customers throughout the world.
OPGW-PRYSMIANintheworld
17
References
OPGW-PRYSMIAN
ARGENTINA PrysmianTelecomunicacionesCablesySistemas deArgentinaS.A. FabricaLaRosa Av.Argentina6784-1439BuenosAires-Argentina Tel.:+541146302052 Fax:+541146302100 Email:fernando.narvaez@prysmian.com
AUSTRALIA PrysmianTelecomCables&SystemsAustralia PtyLimited 1HeathcoteRoad,LiverpoolNSW2170,Australia Tel.:+61296000706 Fax:+61296000406
AUSTRIA PrysmianCavieSistemiTelecomItaliaS.r.l. ViennaSalesOffice Lemboeckgasse47a,-A-1230Vienna,Austria Tel.:+43186677300 Fax:+43186677309 Website:www.at.prysmian.com
BALTIC PrysmianCavieSistemiTelecomItaliaS.r.l.COUNTRIES BratislavaSalesOffice Trnavskacesta50,82102Bratislava2 Slovakia Tel.:+421249491229 Fax:+421249491245 Email:katarina.lebedova@prysmian.comBRAZIL, PrysmianTelecomuniçaoesCaboseSistemasdoSOUTH AND BrasilS.A.CENTRAL Av.AlexandredeGusmão,145.-VilaHomeroThonAMERICA 09110-090SantoAndré-SãoPaulo-Brasil Tel.:+551149984158 Fax:+551149984115 Email:webcabos@prysmian.com
CHINA PrysmianWuxiCableCompanyLtd, 54-56XinanRoad TaihuTown,BinhuDistrict,WuxiCity, JiangsuProvince P.R.China214125 Tel.:+86(0)51085184231 Fax:+86(0)51085185324 Email:alvin.wong@prysmian.com.hk
CZECH. PrysmianCavieSistemiTelecomItaliaS.r.l.REPUBLIC BratislavaSalesOffice Trnavskacesta50,82102Bratislava2 Slovakia Tel.:+421249491229 Fax:+421249491245 Email:katarina.lebedova@prysmian.com
FRANCE PrysmianTélécomCâblesetSystèmesS.A RoutedelaPlaine-BP72-Chavanoz 38232-PONTDECHERUYCEDEX France Tel.:+33472467402 Fax:+33472467409 Email:telecom.fr@prysmian.com
GERMANY PrysmianKabelundSystemeGmbH Alt-Moabit91D 10599-Berlin Tel.:+493036754636 Fax:+493036754640 Email:Dept.Telecom@pirelli.com
HONG KONG PrysmianCables&SystemsPteLtd Room1010,LuPlaza 2WingYipSteet KwunTong,Kowloon,HongKong Tel.:+85228278308 Fax:+85223661227 Email:HK.office@pirelli.com.hk
HUNGARY PrysmianCavieSistemiTelecomItaliaS.r.l. ViennaSalesOffice Lemboeckgasse47a Tel.:+43186677300 Fax:+43186677309 Email:infocables-at@prysmian.com Website:www.at.prysmian.com
INDIA PrysmianTelecomCablesySistemasEspañaS.L. CarreteraC-15,Km2 08800VilanovailaGeltrú(Barcelona),Spain Tel.:+34938116030/6035 Fax:+34938116031 Email:telecom.es@prysmian.com Website:www.es.prysmian.com
INDONESIA PTPrysmianIndonesia GedungBRIII,15thFloor,Suite1502 JalanJendralSudirman,Kav44-46 Jakarta10210,Indonesia Tel.:+62215713313 Fax:+62212512715 Email:pci@dnet.net.id
ITALY PrysmianCavieSistemiTelecomItaliaS.r.l. VialeSarca,222-20126Milano, Italy Tel.:+390264492464 Fax:+390264495060 Email:Telecom@prysmian.com
MALAYSIA PrysmianCableSystemsPteLtd. Lot2JalanKawat15/18,P.O.Box7065 40702ShahAlam-SelangorDarulEhsan Malaysia Tel.:+60355184575/4558 Fax:+60355119590 E-mail:william.lee@prysmian.com
HEADQUARTERS
Prysmian Cavi e Sistemi Telecom S.r.l.Viale Sarca, 222 - 20126 Milano, ItalyEmail: Telecom@prysmian.com, Website:www.prysmian.comTel.: +39 02 6449 4596, Fax: +39 02 6449 4558
18
Contact Offices:
MEXICO PrysmianTelecomCablesandSystems BosquedeCiruelosnº190,piso+1, despachoA103 ColoniaBosquedelasLomas CP11700-MéxicoDF, México Tel.:+525552516031 Fax:+525552514254 Email:administracion.mexico@prysmian.com
THE PrysmianTelecomCablesandSystemsNETHERLANDS Schieweg9,P.O.Box495 2600ALDelft, TheNetherlands Tel.:+31152605260 Fax:+31152605588
NEW ZELAND PrysmianTelecomCables&SystemsAustralia PtyLimited 1HeathcoteRoad, LiverpoolNSW2170, Australia Tel.:+61296000706 Fax:+61296000406
ROMANIA PrysmianCablurisiSistemeS.A. sos.Draganesti,km.4,230150,Slatina Olt,Romania Tel.:+40249406600 Fax:+40249433484 Email:cristian.gheorghe@prysmian.comRUSSIA PrysmianCablesandSystems MoscowRepresentativeOffice 4thStreetVosmogoMarta,6a,9thfloor Russia,Moscow125167 Tel.:007(495)9337036 Fax:007(495)9337035 Website:www.ru.prysmian.com
SWITZERLAND PrysmianCavieSistemiTelecomItaliaS.r.l. VialeSarca,222-20126Milan Itali Tel.:+390264492464 Fax:+390264495060 Email:Telecom@prysmian.com
SINGAPORE PrysmianCableSystemsPteLtd N°4TuasAvenue12,#03-00 Singapore639047 Tel.:+6568629866 Fax:+6568629877 Email:pcs.singapore@prysmian.com
SLOVAK PrysmianCavieSistemiTelecomItaliaS.r.l.REPUBLIC BratislavaSalesOffice Trnavskacesta50,82102Bratislava2, Slovakia Tel.:+421249491229 Fax:+421249491245 Email:katarina.lebedova@prysmian.com
SPAIN PrysmianTelecomCablesySistemasEspañaS.L. CarreteraC-15,Km2 08800VilanovailaGeltrú(Barcelona),Spain Tel.:+34938116030/6035 Fax:+34938116031 Email:telecom.es@prysmian.com Website:www.es.prysmian.com
THAILAND PrysmianCableSystemsPteLtd ThailandRepresentativeOffice 11thFloorRASATower,555PhaholyothinRoad KwangChatuchak,KhetChatuchak Chatuchak-Bangkok10900,Thailand Tel.:+6629370316/7 Fax:+6629370318 Email:pircable@smart.co.th
TURKEY TurkPrysmianKabloveSistemleriA.S. BuyukdereCaddesino.117,34394Gayrettepe, Istanbul,Turkey Tel.:+902123551500 Fax:+902122175896 Email:tpks@prysmian.com
UNITED PrysmianTelecomCables&SystemsUKLtd.KINGDOM ChickenhallLane,Bishopstoke, Eastleigh,Hampshire,SO506YU,UK Tel.:+442380608760 Fax:+442380608769 Email:sales.telecom.uk@prysmian.comUNITED PrysmianCommunicationsCablesandSTATES SystemsUSA,LLC 700IndustrialDrive Lexington,SC29072,USA Tel.:+18039514800/8007135312 Fax:+18039574628
UKRAINE PrysmianCavieSistemiTelecomItaliaS.r.l. BratislavaSalesOffice Trnavskacesta50,82102Bratislava2,Slovakia Tel.:+421249491229 Fax:+421249491245 Email:katarina.lebedova@prysmian.com
VIETNAM PrysmianCablesSystems(S)Pte.Ltd HanoiRepresentativeOffice Unit11702 HITTC,185GiangVoSt.,DongDaDist., Hanoi,VIETNAM Tel.:+8447722700/2701 Fax:+8447722703 Email:prysmianhn@fpt.vn
OTHER PrysmianTelecomCablesySistemasEspañaS.L.COUNTRIES CarreteraC-15,Km2 08800VilanovailaGeltrú(Barcelona),Spain Tel.:+34938116030/6035 Fax:+34938116031 Email:telecom.es@prysmian.com Website:www.es.prysmian.com
Worldw
ide contacts list
19
OPGW-PRYSMIAN
AtPrysmianTelecomCablesandSystemsweareavailabletorespondtoanyqueriesregardingopticaltelecomunications.
PleaseconsultourWorldwideContactsListintothisbrochureandcallusformoreinformation.
www.prysmian.com/OPGW