Post on 22-Dec-2020
1
JAMMU MUNICIPAL CORPORATION
TOWN HALL JAMMU
NIT 03-ARC (M) of 2020-21 date: 08-10-2020
For and on behalf of the Commissioner, Jammu Municipal Corporation, Executive Engineer, Division-II,
2nd Floor, Town Hall Complex, Jammu invites tenders/offers in two cover system from authorized service center /
registered / reputed firms / workshops having sufficient experience in the field of repair and maintenance of
vehicles and construction machinery. Offers are being invited for fixing of annual rate contract for repair and
maintenance of vehicles / construction machines of Jammu Municipal Corporation.
Offers complete in all respects shall reach through Registered Post / Speed Post or in person in the office
of the Executive Engineer, Division-II, 2nd Floor, Town Hall Complex, Jammu on or before 28-10-2020 up to 3
P.M.
All other details of the tender document can be seen on the official website www.jmcjammu.org of
Jammu Municipal Corporation or can be had from single window counter of Jammu Municipal Corporation from
10:00 A.M to 2:00 P.M on any working day for a payment of Rs. 1000/- (Non-Refundable) against a GR.
Sd/-
Executive Engineer
Division-II
No.: MJ/Tech/II/1621-28 Jammu Municipal Corporation
Date: 08-10-2020
Copy for kind information to the:-
1. Commissioner, Jammu Municipal Corporation.
2. Joint Commissioner (Adm), Jammu Municipal Corporation & a request for wide publicity in local dailies.
3. Joint Commissioner(W), Jammu Municipal Corporation.
4. Joint Director Information Jammu for wide publicity in print media.
5. Chief Accounts Officer, Jammu Municipal Corporation.
6. Asst. Executive Engineer (M) Jammu Municipal Corporation & follow up.
7. In-charge Media Cell, Jammu Municipal Corporation.
8. In-charge Computer Center for uploading the NIT on the official website of JMC.
2
Annexure-A
Terms & Conditions
1. Tenders in two cover system should be addressed to the Executive Engineer, Division-II, 2nd
Floor, Town Hall Complex, Jammu and should reach his office on or before 28-10-2020 up to 3
P.M.
2. The firms shall attach the following documents with their offers i.e. Cover-I, the Technical Bid:
i) Earnest Money Deposit/Bid security (original) amounting to Rs. 50,000/- in shape of
CDR/FDR from any Nationalized / Scheduled Bank of India valid for one year pledged
to Chief Account Officer, Jammu Municipal Corporation.
ii) Cost of Tender document in the shape of G.R. (original) amounting to Rs. 1000/- (Non-
Refundable) against buying of tender document.
The firms wishing to download the tender document from official website
www.jmcjamm.org of the Corporation shall enclose the cost of tender document Rs.
1000/- (Non-Refundable) in shape of Demand Draft (original) pledged to Chief
Accounts Officer, Jammu Municipal Corporation failing which the tender will be out
rightly rejected.
iii) Self-attested photocopy of Registration Certificate under J&K ‘Goods & Service Act
2017’. Those not registered yet shall submit an undertaking to the effect that if they are
successful tenderer, they shall submit GST Registration Certificate in J&K within 30
days of issue of work order, failing which payment for the work executed will not be
released.
iv) Self-attested photocopy of valid 'PAN' document
v) Self-attested photocopies of latest income Tax Return Certificate for the last two financial
years.
vi) Self-attested photocopy Valid Registration Certificate
vii) Annual financial turnover not less than Rs. 25.00 lakhs for preceding three financial years
as certified by Chartered Accountant preceding the Financial Year in which bids are
invited.
3. a) The rates inclusive of all taxes under GST regime shall be quoted by the tenderer in the
relevant fields of Annexure-B.
b) The rates quoted shall be fixed with transparent cello tape & no conditional / overwritten
tenders will be accepted.
c) No price/cost escalation on account of increase in prices of spare parts or otherwise shall
be entertained by the Jammu Municipal Corporation
d) Rates quoted shall be firm & final and shall remain valid till the completion of the
contract.
4. a) The firms who intend to send their offers through post are requested to ensure that the
tenders should reach in the office of the Executive Engineer, Division-II, 2nd Floor, Town
Hall Complex, Jammu on or before the due date i.e. 28-10-2020 up to 3 PM.
b) Any delay in the submission/delivery of the tenders shall be the responsibility of the
firm/tenderer. No delayed tenders shall be accepted.
5. a) Cover-I i.e. Technical bid of the offers received within due date and time shall be
opened in the office of the tender inviting authority on the same day or subsequent
working day.
b) Interested bidders, if they desire so, can be present while opening of the bids so received.
3
6. Cover-II i.e. Financial bids of only the Technically qualifying bidders shall be opened by the
tender opening committee and evaluated.
7. The validity of the tenders shall be for three months from the date of opening of Cover-II of the
tender.
8. The acceptance / rejection of the tender/s will rest with the Commissioner, Jammu Municipal
Corporation who does not bind herself/himself to accept the lowest tender and reserves to
herself/himself the authority to reject any or all of the tenders received without assigning any
reason(s) thereof. Conditional tenders shall be out rightly rejected.
9. Jammu Municipal Corporation reserves the right to allot the lowest rates to any participating
tenderer who gives his/her consent to work at the lowest rates. The CDR/FDR of the tenderer
who agrees to work at lowest allotted rates shall be retained as performance guarantee and shall
be released after expiry of annual rate contract.
10. a) The Earnest Money shall be refunded to the unsuccessful tenderers and in case of the
successful tenderers shall be retained as performance guarantee and shall be released after
the annual rate contract has expired and/or new one has been put in place.
b) The earnest money of the tenderer who back out or withdraws his/her tender or fails to
abide by it, after acceptance thereafter is conveyed or posted to him, shall be forfeited
besides other penalties that may be available to the Jammu Municipal Corporation under
the law in force in the Union Territory.
11. The successful tenderers shall have to execute an agreement with the Jammu Municipal
Corporation within a period of 10 days after receiving the allotment order.
12. All the material/spare parts and workmanship shall be of the best quality and shall be strictly as
per prescribed specifications/samples.
13. The Corporation shall at any time have access to the workshop/site where the repair
work/fabrication is being undertaken by the firm and where material / manufactured articles and
machinery, are being obtained so as to inspect and examine material/spares and workmanship.
14. Penalty: The work shall have to be completed within a period of 3/5 days in all respects. Delay if
any, the penalty up to 10% shall be imposed.
15. Payment:
100% payment for the repair work/s carried out by the firm for the preceding month shall be
released after verification by the Engineer-in-Charge against the claims submitted by the firm by
or before 10th of every month
16. The decision of the Commissioner, Jammu Municipal Corporation shall be final, conclusive and
binding upon the contractor/successful bidder on all questions relating to the quality of repairs
carried out or workmanship or materials/equipment used for the repair and maintenance of
vehicles/construction machinery.
17. For any dispute arising out of this contract the Courts at Jammu only shall have jurisdiction.
18. All other terms and conditions laid down in PWD Form No. 25 of J&K Government shall be
applicable.
Executive Engineer
Division-II
Jammu Municipal Corporation
4
ANNEXURE “B”
Gear Box
Description of
Goods
Qty TATA
407
TIPPER
TATA
1213
TATA
1613
FORCE
MINI
BUS
JCB
LOADER
ESCORT
LOADER
TATA
ACE
LOADER
ROAD
ROLLER
SWARAJ
MAZDA
TATA
709
Main Drive
shaft
No.
Counter Shaft No.
Twin Gear No.
Ist Speed
Gear
No.
IInd Speed
Gear
No.
III Speed
Gear
No.
IV Speed
Gear
No.
V Speed Gear No.
Reverse Gear No.
Gear Box
Sleeve Set
No.
Gear Box
Roller Brg
No.
Block Brg No.
Needle Brg No.
Synchronizing
Ring Set
No.
Flower Kit
Complete
No.
Gear Box Oil
Seal Set
No.
RTV Silicon
Tube
No.
5
Top Cover
Gear Box
Lever
No.
Gear Box
Housing Bolt
No.
Differential
Crown
Wheel
Pinion with
Nut
Set
Pinion Brgs No.
Spider No.
Star Kit
Complete
Set
Diff Cage No.
Diff Stud No.
Star Washer
Big/Small
No.
Diff Joint No.
Main Oil
Seal
No.
RTV Tube
Silicon
No.
Propeller Shaft
U.J Cross No.
Cross
Holder
No.
Coupling No.
Half Yoke No.
Yoke &
Teeth
Set
Front Teeth No.
Centre
Bearing
Set
6
Assembly
Complete
Shaft Bolt
With Nut &
Washer
No.s
Clutch and Suspension
Clutch Plate No.
Pressure
Plate
No.
Clutch
Release Brg
W/Hub
No.
Clutch Cyl
assembly
No.
Fly Wheel
assembly
with Ring
No.
F/W oil seal No.
F/W Spindle No.
F/W King
Pin Set With
Bush &
Brgs Cotters
& Shims
Set
Tie Rod Ball
Set
Set
Tie Rod End
Set
Set
F/w Brgs
inner
No.
F/w Brgs
Outer
No.
Rear Wheel
Oil Seal
No.
7
Rear Wheel
Spindle
No.
R/w Brg
inner
No.
R/w Brg
Outer
No.
Cam Bush Set
Cam oil seal Set
R/W Axle No.
Hub Drum
F/R
No.
Centre Bolt
Front
No.
Centre Bolt
Rear
No.
Front Leaf
Spring Main
No.
Front Leaf
Spring 2nd
No.
Front Leaf
Spring AUX
No.
Front Leaf
Spring 3rd
No.
Front Leaf
Spring 4th
No.
Front Leaf
Spring 5th
No.
Front Leaf
Spring 6th
No.
Front Leaf
Spring 7th
No.
Rear Leaf
Spring Main
No.
Rear Leaf
Spring 2nd
No.
8
Rear Leaf
Spring AUX
No.
Rear Leaf
Spring 3rd
No.
Rear Leaf
Spring 4th
No.
Rear Leaf
Spring 5th
No.
Rear Leaf
Spring 6th
No.
Rear Leaf
Spring 7th
No.
F/R Hub
Bolt With
Nut
No.
Leaf Spring
Washer
No.
Leaf Spring
Pin with
Bush
No.
Leaf Spring
U-Bolt With
Nut
No.
Shock
Observer
Front
No.
Shock
Observer
Rear
No.
Leaf Spring
Bracket
No.
Leaf Spring
Shackle
No.
9
Leaf Spring
Clamp with
Bolt
No.
Shock
Observer
Front
No.
Shock
Observer
Rear
No.
Wheel
Alignment
1 Job
FIP
Rotary
Pump Unit
No.
Cam Plate No.
Lever Shaft No.
Guide
bushing
No.
Oil Seal No.
T.D Piston No.
Cross Disc No.
Roller No.
D.P Head No.
V.E Pump
Repair Kit
No.
Acc Bush No.
Supply
Pump
No.
No.zzle No.
No.zzle
Pipes
No.
Calibration
of FIP
including
1 Job
10
replacement
of Parts
Steering
Rotor No.
Needle Brg No.
Elbow No.
Power Stg
repair kit
No.
Air release
Piston
No.
Hyd Pipes No.
Stg worm
assy
No.
Stg Bearing No.
Stg Cross No.
StgPit man
arm
No.
Stg Shaft No.
Stg O/H kit Kit
Stg oil LTR Kit
Stg Bolt
APS
No.s
Turbo System
Turbo Core
Assy
No.
Turbo body No.
Turbo Hose No.
Air Filter Set
Self
Armature
Assy
No.
Self Carbon
Brush Set
Set
Copper
Bush Set
Set
11
Bendix
Drive
No.
SoleNo.id
Switch
No.
Field coil
Set
Set
Battery /
Lead Set
Set
Alternator Assy
Rectifier
Plate
No.
Diode No.
Carbon
Bush Set
Set
Cut Out No.
Snap ring No.
Armature
assy
No.
Oil Seal No.
Bearing No.
Silencer
Silencer No.
Silencer
clamp Set
No.
Joint &
Bolts
No.
Silencer gas
Welding &
Patching
Job
Silencer
Main Body
(Dholki)
No.
Radiator
Radiator
fins
Set
12
Radiator
Cup
No.
Hose Pipe
Set
w/Clamp
Set
Radiator
Fan
No.
Water Body No.
New
Radiator
Complete
No.
Servicing of
radiator
Job
Electrical Work
Replacement
of old worn
out/
damaged
wiring
Job
New Horn
Double assy
No.
H/L assy
w/tube
Set
Tail Light
assy
No.
Roof Light No.
Side
indicator
assy
No.
Combination
Switch
No.
Ignation
Switch
No.
13
Toggle
Switch
No.
L.T wire L/s
Battery lead
with
thimbles &
terminal etc
No.
Labour
Charges
No.
Filter System
Oil Filter No.
M.Oil Filter No.
By Pass No.
Water
System
Filter
No.
Air Filter No.
Fuel pipe No.
Brake
F/W Brake
Leather Set
W/Rivets
Set
Brake Slack
Adjuster
No.
Rear Wheel
Brake Leather
Set W/Rivets
Set
Rear Brake
Slack Adjuster
No.
F/R Wheel
Cylinder
Assembly
N
14
Master
cylinder
No.
Brake Pipe No.
F/ R wheel
cylinder
No.
Front and
Rear Brake
Cam
No.
Dual Brake
Valve
Assembly
(Booster)
No.
Air Pressure
Pipes
No.
Brake
Actuator
No.
Diaphagram
washer of
brakes
No.
Hyd Pump
Hyd Pump Overhauling
Complete Hyd O/H Kit
Complete with seals
joints, O.rings etc
No.
P.T.O gear Big No.
P.T.O gear Small No.
P.T.O gear Small Bolt
with nut
No.
Hyd Jack
Hyd Jack Seal Kit
Complete
No.
Hyd Jack Rod Steel No.
Hyd Jack Piston No.
Labour Charges Job
15
Lathe Mech
Hydraulic Pressure
Pipe of size 10 mm
dia/feet
No.
Hydraulic Pressure
Pipe of size 16 mm
dia/feet
No.
Hydraulic Pressure
Pipe of size 24 mm
dia/feet
No.
Hydraulic Pressure
Pipe of size 25 mm
dia/feet
No.
Hydraulic Pressure
Pipe of size 35 mm
dia/feet
No.
Hydraulic Pressure
Pipe of size 36 mm
dia/feet
No.
Hydraulic Pressure
Pipe of size 50 mm
dia/feet
No.
Hydraulic Filter Set
Hyd Tank
Cleaning Patching
washing gas welding
Job
Air Conditioning
AC Switch No.
Radiator Condenser No.
Core Assembly No.
Liquid Pipe No.
Speed Resistance
Assembly
No.
Evaporator Assembly No.
Cooling Pipe No.
16
Filing of AC Gas No.
Labour Charges for
opening and fitting
No.
Window Glasses and Front Glasses
Front Glass / Wind
Shield
1 No.
Door Glass Right 1 No.
Door Glass Left 1 No.
Rubber Bidding for
Front Glass fitting
1 No.
Silicon Tube 1 No.
Labour Charges for
Glass Fitting
1 Job
Engine Work
Piston with Pin 1 Set
Piston Ring set 1 Set
Cylinder Liner
(Sleeve)
1 Set
Main and Big end
Bearing
1 Set
Connecting Rod Bush 1 Set
Cam Bush 1 Set
Thrush Washer 1 Set
Head Valve and
Guide Set
1 Set
Head Valve Seal Set 1 Set
Air Compressor
Piston with ring
complete
1 No.
Oil Pump 1 No.
Crank Shaft New 1 No.
Filter Set Complete 1 Set
Air Filter Set 1 Set
17
Engine Foundation 1 Set
Labour Charges for
cylinder sleeve fitting
Main and Big end
bearing, Crank Polish
and grinding to exact
size, Cam Bush
Fitting and
Connecting Rod Bush
Fitting
1 Job
Labour Charges for
cylinder head, New
Seat Fitting, Rimsing
Grinding with head
valve guide fitting and
head testing etc
1 Job
Labour Charges for
complete Engine
Overhauling
1 Job
Annual Passing S.
No.
Description of
Goods Qty Type of Vehicle
TATA 407
TIPPER
TATA
1213
TATA
1613
FORCE
MINI BUS
JCB
LOADER
ESCORT
LOADER
TATA
ACE
LOADER
ROAD
ROLLER
SWARAJ
MAZDA
TATA 409
Rate Each
Job/Items
Rate Each
Job/Items
Rate
Each
Job/Items
Rate Each
Job/Items
Rate
Each
Job/Items
Rate
Each
Job/Items
Rate Each
Job/Items
Rate
Each
Job/Items
Rate
Each
Job/Items
Rate Each
Job/Items
1. Painting of
whole body
in
department
al blue
colour
enamel
paint two
1 Job
18
coats
including
letter
writing
after
scraping of
old paint
with emery
paper and
applying of
N.C putty
wherever
required.
2. Denting by
hammer
beating /
heat
treatment
as required
and
repairing of
front
Bumper
1 Job
3. Denting by
hammer
beating /
heat
treatment
as required
of Front
Show
1 Job
4. Denting by
hammer
beating /
heat
treatment
Each
Fend
er
19
as required
of Fenders
5. Denting by
hammer
beating /
heat
treatment
as required
of Window
Each
Wind
ow
6. Denting by
hammer
beating /
heat
treatment
as required
and
repairing of
Foot Rest
with
patching
Each
Footr
est
7. Denting by
hammer
beating /
heat
treatment
as required
and
repairing of
rear
Mudguard
with
patching
Each
Mud
guar
d
8. Front
Lights full
assembly
replacement
Per
asse
mbly
20
9. Front
Lights half
assembly
replacement
Per
asse
mbly
10. Back Lights
full
assembly
replacement
Per
asse
mbly
11. Back Lights
half
assembly
replacement
Per
asse
mbly
12. Labor for
Lights
repairs/
replacement
Per
Light
13. Seat Covers
new making
& fitting
Each
Job
14. Repair to
body by
way of
replacement
of damaged
sheet / angle
with new
one
including
gas cutting
and
welding, nut
bolts, nails,
screw etc
Per
Squa
re
15. Replacemen 1 No..
21
Spare Fitting Charges
Labour Charges on fitting of spare parts to be
quoted in %age of total cost of spares
Rebate of old parts to be quoted in %age
VAT on spare parts @
t of
damaged
front glass
including
PVC tubes
16. Replacemen
t of side
mirror
1 No..
22
Annexure “B”
Gear Box
Description of
Goods
Qty Mahindra
Bolero
Mahindra
Scorpio
Ambassador Maruti
Gypsy
Tractor TATA
Sumo
TATA
207
TATA
ACE
AUTO
TATA
1109
TATA
1616
Main Drive
shaft
No.
Counter Shaft No.
Twin Gear No.
Ist Speed
Gear
No.
IInd Speed
Gear
No.
III Speed
Gear
No.
IV Speed
Gear
No.
V Speed Gear No.
Reverse Gear No.
Gear Box
Sleeve Set
No.
Gear Box
Roller Brg
No.
Block Brg No.
Needle Brg No.
Synchronizing
Ring Set
No.
Flower Kit
Complete
No.
Gear Box Oil
Seal Set
No.
RTV Silicon
Tube
No.
Top Cover No.
23
Gear Box
Lever
Gear Box
Housing Bolt
No.
Differential
Crown
Wheel
Pinion with
Nut
Set
Pinion Brgs No.
Spider No.
Star Kit
Complete
Set
Diff Cage No.
Diff Stud No.
Star
Washer
Big/Small
No.
Diff Joint No.
Main Oil
Seal
No.
RTV Tube
Silicon
No.
Propeller Shaft
U.J Cross No.
Cross
Holder
No.
Coupling No.
Half Yoke No.
Yoke &
Teeth
Set
Front Teeth No.
Centre Set
24
Bearing
Assembly
Complete
Shaft Bolt
With Nut &
Washer
No.s
Clutch and Suspension
Clutch
Plate
No.
Pressure
Plate
No.
Clutch
Release Brg
W/Hub
No.
Clutch Cyl
assembly
No.
Fly Wheel
assembly
with Ring
No.
F/W oil seal No.
F/W
Spindle
No.
F/W King
Pin Set
With Bush
& Brgs
Cotters &
Shims
Set
Tie Rod
Ball Set
Set
Tie Rod
End Set
Set
F/w Brgs
inner
No.
25
F/w Brgs
Outer
No.
Rear Wheel
Oil Seal
No.
Rear Wheel
Spindle
No.
R/w Brg
inner
No.
R/w Brg
Outer
No.
Cam Bush Set
Cam oil seal Set
R/W Axle No.
Hub Drum
F/R
No.
Centre Bolt
Front
No.
Centre Bolt
Rear
No.
Front Leaf
Spring
Main
No.
Front Leaf
Spring 2nd
No.
Front Leaf
Spring
AUX
No.
Front Leaf
Spring 3rd
No.
Front Leaf
Spring 4th
No.
Front Leaf
Spring 5th
No.
Front Leaf
Spring 6th
No.
26
Front Leaf
Spring 7th
No.
Rear Leaf
Spring
Main
No.
Rear Leaf
Spring 2nd
No.
Rear Leaf
Spring
AUX
No.
Rear Leaf
Spring 3rd
No.
Rear Leaf
Spring 4th
No.
Rear Leaf
Spring 5th
No.
Rear Leaf
Spring 6th
No.
Rear Leaf
Spring 7th
No.
F/R Hub
Bolt With
Nut
No.
Leaf Spring
Washer
No.
Leaf Spring
Pin with
Bush
No.
Leaf Spring
U-Bolt With
Nut
No.
Shock
Observer
Front
No.
Shock No.
27
Observer
Rear
Leaf Spring
Bracket
No.
Leaf Spring
Shackle
No.
Leaf Spring
Clamp with
Bolt
No.
Shock
Observer
Front
No.
Shock
Observer
Rear
No.
Wheel
Alignment
1 Job
FIP
Rotary
Pump Unit
No.
Cam Plate No.
Lever Shaft No.
Guide
bushing
No.
Oil Seal No.
T.D Piston No.
Cross Disc No.
Roller No.
D.P Head No.
V.E Pump
Repair Kit
No.
Acc Bush No.
Supply
Pump
No.
28
No.zzle No.
No.zzle
Pipes
No.
Calibration
of FIP
including
replacement
of Parts
1 Job
Steering
Rotor No.
Needle Brg No.
Elbow No.
Power Stg
repair kit
No.
Air release
Piston
No.
Hyd Pipes No.
Stg worm
assy
No.
Stg Bearing No.
Stg Cross No.
StgPit man
arm
No.
Stg Shaft No.
Stg O/H kit Kit
Stg oil LTR Kit
Stg Bolt
APS
No.s
Turbo System
Turbo Core
Assy
No.
Turbo body No.
Turbo Hose No.
Air Filter Set
29
Self
Armature
Assy
No.
Self Carbon
Brush Set
Set
Copper
Bush Set
Set
Bendix
Drive
No.
SoleNo.id
Switch
No.
Field coil
Set
Set
Battery /
Lead Set
Set
Alternator Assy
Rectifier
Plate
No.
Diode No.
Carbon
Bush Set
Set
Cut Out No.
Snap ring No.
Armature
assy
No.
Oil Seal No.
Bearing No.
Silencer
Silencer No.
Silencer
clamp Set
No.
Joint &
Bolts
No.
Silencer gas
Welding &
Job
30
Patching
Silencer
Main Body
(Dholki)
No.
Radiator
Radiator
fins
Set
Radiator
Cup
No.
Hose Pipe
Set
w/Clamp
Set
Radiator
Fan
No.
Water Body No.
New
Radiator
Complete
No.
Servicing of
radiator
Job
Electrical Work
Replacement
of old worn
out/
damaged
wiring
Job
New Horn
Double assy
No.
H/L assy
w/tube
Set
Tail Light
assy
No.
Roof Light No.
Side
indicator
No.
31
assy
Combination
Switch
No.
Ignation
Switch
No.
Toggle
Switch
No.
L.T wire L/s
Battery lead
with
thimbles &
terminal etc
No.
Labour
Charges
No.
Filter System
Oil Filter No.
M.Oil Filter No.
By Pass No.
Water
System
Filter
No.
Air Filter No.
Fuel pipe No.
Brake
F/W Brake
Leather Set
W/Rivets
Set
Brake Slack
Adjuster
No.
Rear Wheel
Brake
Leather Set
W/Rivets
Set
32
Rear Brake
Slack
Adjuster
No.
IF/R Wheel
Cylinder
Assembly
N
Master
cylinder
No.
Brake Pipe No.
F/ R wheel
cylinder
No.
Front and
Rear Brake
Cam
No.
Dual Brake
Valve
Assembly
(Booster)
No.
Air
Pressure
Pipes
No.
Brake
Actuator
No.
Diaphagram
washer of
brakes
No.
Hyd Pump /PTO
Hyd Pump Overhauling
Complete Hyd O/H Kit
Complete with seals
joints, O.rings etc
No.
P.T.O gear Big No.
P.T.O gear Small No.
33
P.T.O gear Small Bolt
with nut
No.
Hyd Jack
Hyd Jack Seal Kit
Complete
No.
Hyd Jack Rod Steel No.
Hyd Jack Piston No.
Labour Charges Lathe
Mech
Job
Hydraulic Pressure
Pipe of size 10 mm
dia/feet
No.
Hydraulic Pressure
Pipe of size 16 mm
dia/feet
No.
Hydraulic Pressure
Pipe of size 24 mm
dia/feet
No.
Hydraulic Pressure
Pipe of size 25 mm
dia/feet
No.
Hydraulic Pressure
Pipe of size 35 mm
dia/feet
No.
Hydraulic Pressure
Pipe of size 36 mm
dia/feet
No.
Hydraulic Pressure
Pipe of size 50 mm
dia/feet
No.
Hydraulic Filter Set
Hyd Tank
Cleaning Patching
washing gas welding
Job
34
Air Conditioning
AC Switch No.
Radiator Condenser No.
Core Assembly No.
Liquid Pipe No.
Speed Resistance
Assembly
No.
Evaporator Assembly No.
Cooling Pipe No.
Filing of AC Gas No.
Labour Charges for
opening and fitting
No.
Window Glasses and Front Glasses
Front Glass / Wind
Shield
1 No.
Door Glass Right 1 No.
Door Glass Left 1 No.
Rubber Bidding for
Front Glass fitting
1 No.
Silicon Tube 1 No.
Labour Charges for
Glass Fitting
1 Job
Engine Work
Piston with Pin 1 Set
Piston Ring set 1 Set
Cylinder Liner
(Sleeve)
1 Set
Main and Big end
Bearing
1 Set
Connecting Rod
Bush
1 Set
Cam Bush 1 Set
Thrush Washer 1 Set
35
Head Valve and
Guide Set
1 Set
Head Valve Seal Set 1 Set
Air Compressor
Piston with ring
complete
1 No.
Oil Pump 1 No.
Crank Shaft New 1 No.
Filter Set Complete 1 Set
Air Filter Set 1 Set
Engine Foundation 1 Set
Labour Charges for
cylinder sleeve fitting
Main and Big end
bearing, Crank
Polish and grinding
to exact size, Cam
Bush Fitting and
Connecting Rod
Bush Fitting
1 Job
Labour Charges for
cylinder head, New
Seat Fitting, Rimsing
Grinding with head
valve guide fitting
and head testing etc
1 Job
Labour Charges for
complete Engine
Overhauling
1 Job
Annual Passing S. No. Description of
Goods Qty Type of Vehicle
Mahindr
a Bolero Mahindr
a Scorpio
Ambassado
r Maruti
Gypsy Tractor Tata
Sumo Tata 207 Tata Ace
Auto Tata
1109 Tata
1616
36
Rate
Each
Job/Items
Rate
Each
Job/Items
Rate Each
Job/Items Rate
Each
Job/Item
s
Rate
Each
Job/Items
Rate Each
Job/Items Rate
Each
Job/Item
s
Rate
Each
Job/Item
s
Rate
Each
Job/ Items
Rate
Each
Job/ Items
1. Painting of
whole body
in
department
al blue
colour
enamel
paint two
coats
including
letter
writing
after
scraping of
old paint
with emery
paper and
applying of
N.C putty
wherever
required.
1 Job
2. Denting by
hammer
beating /
heat
treatment
as required
and
repairing of
front
Bumper
1 Job
3. Denting by 1 Job
37
hammer
beating /
heat
treatment
as required
of Front
Show
4. Denting by
hammer
beating /
heat
treatment
as required
of Fenders
Each
Fend
er
5. Denting by
hammer
beating /
heat
treatment
as required
of Window
Each
Win
dow
6. Denting by
hammer
beating /
heat
treatment
as required
and
repairing of
Foot Rest
with
patching
Each
Foot
rest
7. Denting by
hammer
beating /
heat
Each
Mud
guar
d
38
treatment
as required
and
repairing of
rear
Mudguard
with
patching
8. Front
Lights full
assembly
replacement
Per
asse
mbly
9. Front
Lights half
assembly
replacement
Per
asse
mbly
10. Back Lights
full
assembly
replacement
Per
asse
mbly
11. Back Lights
half
assembly
replacement
Per
asse
mbly
12. Labor for
Lights
repairs/
replacement
Per
Light
13. Seat Covers
new making
& fitting
Each
Job
14. Repair to
body by
way of
Per
Squa
re
39
replacement
of damaged
sheet / angle
with new
one
including
gas cutting
and
welding, nut
bolts, nails,
screw etc
15. Replacemen
t of
damaged
front glass
including
PVC tubes
1
No..
16. Replacemen
t of side
mirror
1
No..
Spare Fitting Charges
Labour Charges on fitting of spare parts in %age of total cost of spares
Rebate of old parts in %age
VAT/GST on spare parts @
Executive Engineer(C)
Municipal Corporation
Jammu