Post on 07-Apr-2015
N I B C O® P r e s s S y s t e m®
CATALOG C-NPS-0905
AHEAD OF THE F LOW ®
CATALOG C-NPS-0310
NIBCO INC. WORLD HEADQUARTERS • 1516 MIDDLEBURY ST. • ELKHART, IN 46516-4740 • USA • PH: 1.800.234.0227 TECH SERVICES PH:1.888.446.4226 • FAX: 1.888.336.4226 • INTERNATIONAL OFFICE PH: +1.574.295.3327 • FAX: +1.574.295.3455
www.nibco.com
The velocity with which e-business evolves demands that new products and serv-ices be continuously developed and introduced to keep our customers at the center of our business efforts. NIBCO provides an entire suite of business-to-business solutions that is changing the way we interact with customers.
Look to NIBCO for technology leadership.
Business-to-Business Solutions
NIBCOpartner.comsm is an exclusive set of secure web applications that allow quick access to customer-specific information and online order processing. This self-service approach gives you 24/7 access to your order status putting you in total control of your business.
Real time information includes:• Online order entry • Current price checks• Viewable invoices & reports • Order status• Inventory availability • Online library of price sheets, catalogs & submittals
Electronic Data Interchange (EDI) makes it possible to trade business documents at the speed of light. This technology cuts the cost of each transaction by eliminating the manual labor and paper-work involved in traditional order taking. This amounts to cost-savings, increased accuracy and better use of resources.
With EDI, you can trade:• Purchase orders • Product activity data• PO Acknowledgements • Advanced ship notices• Invoices • Remittance advice
Vendor Managed Inventory (VMI), a sophisticated service for automated inventory management, reduces your overhead by transferring inventory management, order entry and forecasting to NIBCO. This is an on-going, interactive partnership with NIBCO.
Through automation, VMI brings results:• Improves customer service • Cuts transaction costs• Optimum inventory efficiencies • Peace of mind• Better forecasting • Relief from day-to-day management
A H E A D O F T H E F L O W®www.nibco.com
NIBCO INC. WORLD HEADQUARTERS • 1516 MIDDLEBURY ST. • ELKHART, IN 46516-4740 • USA • PH: 1.800.234.0227 TECH SERVICES PH: 1.888.446.4226 • FAX: 1.888.234.0557 • INTERNATIONAL OFFICE PH: +1.574.295.3327 • FAX: +1.574.295.3455
www.nibco.com1
Revised 6/4/2010
PageContents.......................................................................................... 1Fittings.........................................................................................3-9 Adapters.................................................................................... 4 Caps.......................................................................................... 4 Couplings.................................................................................. 4 Elbows....................................................................................... 5 FittingReducers........................................................................ 7 Flanges...................................................................................... 7 Manifolds.................................................................................. 7 Tees........................................................................................... 8 Unions....................................................................................... 9 Accessories............................................................................... 9Valves......................................................................................11-46 IllustratedIndex................................................................12-14 PF585-70BallValve................................................................ 15 PF585-70-66BallValve........................................................... 16 PF585-70-NSBallValvew/NIB-SEAL®Handle..................... 17 PF585-70-66-NSBallValvew/NIB-SEAL®Handle............... 18 PF585-70-LLBallValvew/LockingLeverHandle.................. 19 PF585-70-66-LLBallValvew/LockingLeverHandle............. 20 PF585-70-HCBallValve-HoseConnectionw/Cap&Chain... 21 PFFP600BallValve.................................................................. 22 PF111GateValve.................................................................... 23 PF113GateValve.................................................................... 24 PF211-YGlobeValve............................................................... 25 PF311-YAngleValve............................................................... 26 PF413-YCheckValve.............................................................. 27 PF480-YIn-lineCheckValve................................................... 28 PFD2000ButterflyValve......................................................... 29 PS585-70BallValve................................................................ 30 PS585-70-66BallValve.......................................................... 31 PS585-70-NSBallValvew/NIB-SEAL®Handle.................... 32 PS585-70-66-NSBallValvew/NIB-SEAL®Handle............... 33 PS585-70-HCBallValve-HoseConnectionw/Cap&Chain... 34 PS111GateValve................................................................... 35 PS113GateValve...................................................36 PS211-YGlobeValve.............................................................. 37 PS311-YAngleValve.............................................................. 38 PS413-YCheckValve.............................................................. 39 PS480-YIn-lineLiftCheckValve............................................ 40 PCM480-YIn-lineLiftCheckValve......................................... 41 PCM585-60BallValve............................................................ 42 PF221/222-A/BBronzeY-Strainer.......................................... 43
Page HandleOptionsandAccessories............................................ 44 NIB-SEAL®TechnicalData..................................................... 45 ButterflyValveOptionsandAccessories............................... 46 ButterflyValveTechnicalInformation.................................... 47
ToolsandJaws.......................................................................48-51 NIBCO®StandardPressingTool-PC-100.............................. 49 NIBCO®
MiniPressingTool-PC-10M.................................... 50 ApprovedToolandJawCompatibilityMatrix....................... 52EngineeringData...................................................................53-55 CopperandCopperAlloyFittings........................................... 54 SampleSpecification.............................................................. 55InstallationInstructions.......................................................56-62 1/2"-2"FittingsandValves................................................... 58 21/2"-4"FittingandValves.................................................... 60 MiscellaneousTechnicalInformation..................................... 62FrequentlyAskedQuestions..................................................... 63
NIBCOWarranty.......................................................................... 64
NIBCO®PressSystem®
TableofContentsVisit our website for the most current information.
A H E A D O F T H E F L O W®www.nibco.com
NIBCO INC. WORLD HEADQUARTERS • 1516 MIDDLEBURY ST. • ELKHART, IN 46516-4740 • USA • PH: 1.800.234.0227 TECH SERVICES PH: 1.888.446.4226 • FAX: 1.888.234.0557 • INTERNATIONAL OFFICE PH: +1.574.295.3327 • FAX: +1.574.295.3455
www.nibco.com
2
Revised 3/11/2010
Meeting your pressing needs...
QuickandEasy
The NIBCO® Press System® is user friendly, quick and easy to install. Installation can becompletedinlesstimethantraditionalsolder,threaded,brazedorgroovedcoppersystems.Significanttime savings means tight budgets and deadlines are met while project delays and cost overruns areavoided.
FullSystemProductOfferingTheNIBCO®PressSystem®ismorethanjust1/2"to4"fittings.Ourofferingalsoincludestheindustry'swidestandmostspecifiedrangeofball,gate,globe,angle,checkandbutterflyvalvesinadditiontoafulllineofNIBCOtoolsnecessarytocompleteatotalsysteminstallation.
Flameless
TheNIBCO®PressSystem®iseasierandsafertousebecausethereisnoflame,solderorfluxrequired.Connectionscanevenbemadeonawettube!
Reliable
WiththeNIBCO®PressSystem®,awatertightjointisformedbetweentheEPDMsealandthecrimpedfittingorvalveprovidingapermanentconnection.Reliabilityyoucancounton...NIBCOPressFittingsarebackedbya100-year-oldcompanyanda50-yearwrittenguarantee.
Approvals,StandardsandPerformance
The NIBCO® Press System® has undergone extensive and rigorous internal and external testing andmeetsvariousworldwide,industryandgovernmentalstandardsandcodes,includingNSF-61,CSAandUPC.AllvalvesandfittingsaremanufacturedunderaQualityManagementSystemconformingtothecurrentversionofISO-9001standards.Foracompletelistingoftestingcriteriaandresultsorcertifica-tionsandapprovalspleasecontactNIBCOTechnicalServicesorvisitwww.nibco.com.
Applications
TheNIBCO®PressSystem®canbeusedinnewconstructionorrepairworkandisdesignedforpotablewater,HVACandprocesswatersystemsforcommercial,industrialandresidentialapplications.
ProfessionalAppearance
TheNIBCO®PressSystem®createsacleanjointwithoutthemessofexcesssolderordiscoloration.
JointIntegrity
The NIBCO® Press System® uses engineered tools, jaws and chains that are tested and approved toensureaconsistent,reliablecrimp.
A H E A D O F T H E F L O W®www.nibco.com
NIBCO INC. WORLD HEADQUARTERS • 1516 MIDDLEBURY ST. • ELKHART, IN 46516-4740 • USA • PH: 1.800.234.0227 TECH SERVICES PH: 1.888.446.4226 • FAX: 1.888.234.0557 • INTERNATIONAL OFFICE PH: +1.574.295.3327 • FAX: +1.574.295.3455
www.nibco.com3
Revised 3/11/2010
Fittings
A H E A D O F T H E F L O W®www.nibco.com
NIBCO INC. WORLD HEADQUARTERS • 1516 MIDDLEBURY ST. • ELKHART, IN 46516-4740 • USA • PH: 1.800.234.0227 TECH SERVICES PH: 1.888.446.4226 • FAX: 1.888.234.0557 • INTERNATIONAL OFFICE PH: +1.574.295.3327 • FAX: +1.574.295.3455
www.nibco.com
4
Revised 3/11/2010
ADAPTERS
PC603AdapterPxF–BrassRod(*Wrot) APPROX. DIM.A NOM.SIZE NETWT./LBS. INCHES
1/2 .145 27/32
*1/2x3/8 .103 13/32
1/2x3/4 .168 15/16
3/4 .199 15/16
3/4x1/2 .176 7/8
1 .223 11/8
*1x1/2 .398 13/4
1x3/4 .223 31/32
*1x11/4 .436 21/4
11/4 .436 11/16
11/4x1 .302 15/16
*11/4x11/2 .602 211/32
11/2 .544 11/16
*11/2x3/4 .335 21/8
11/2x11/4 .648 11/16
2 .996 13/16
*21/2 1.342 113/32
*3 1.884 123/32
*4 3.238 17/8
PC617CapP–Wrot APPROX. DIM.N NOM.SIZE NETWT./LBS. INCHES
1/2 .050 3/32
3/4 .101 3/32
1 .106 3/32
11/4 .148 3/32
11/2 .276 3/32
2 .403 3/32
21/2 .482 7/32
3 .792 7/32
4 1.674 1/4
COUPLINGS
PC604AdapterPxM–BrassRod(*Wrot) APPROX. DIM.B NOM.SIZE NETWT./LBS. INCHES
1/2 .134 13/32
*1/2x3/8 .107 15/32
1/2x3/4 .218 17/32
3/4 .227 17/32
3/4x1/2 .163 7/8
1 .328 115/32
1x3/4 .296 13/8
1x11/4 .518 121/32
11/4 .501 19/16
11/4x1 .408 115/32
11/4x11/2 .630 111/16
11/2 .700 117/32
11/2x11/4 .670 117/32
2 1.162 121/32
*21/2 1.322 127/32
*3 2.104 21/8
*4 3.298 29/32
PC600-DSCouplingPxP–Wrot APPROX. DIM.A NOM.SIZE NETWT./LBS. INCHES
1/2 .087 13/32
3/4 .142 1/2
1 .178 1/2
11/4 .233 15/32
11/2 .464 19/32
2 .637 21/32
21/2 .669 1/8
3 .979 1/8
4 1.969 7/32
PC604-PAdapterPEXxP–Wrot APPROX. DIM.B NOM.SIZE NETWT./LBS. INCHES
1/2x1/2 .061 7/64
1/2x3/4 .111 3/16
3/4x1/2 .061 1/16
3/4x3/4 .108 9/64
1x1 .156 5/32
CAPS
NOTE:SomeitemsnotcertifiedbyNSFtoNSF/ANSI61.Seemanufacturer'slistingforapprovedsizesandapplications,orcontactNIBCOTechnicalServicesforacompletelistingofcurrentcertifications.
A H E A D O F T H E F L O W®www.nibco.com
NIBCO INC. WORLD HEADQUARTERS • 1516 MIDDLEBURY ST. • ELKHART, IN 46516-4740 • USA • PH: 1.800.234.0227 TECH SERVICES PH: 1.888.446.4226 • FAX: 1.888.234.0557 • INTERNATIONAL OFFICE PH: +1.574.295.3327 • FAX: +1.574.295.3455
www.nibco.com5
Revised 3/11/2010
PC60645°ElbowPxP–Wrot APPROX. DIM.C DIM.D NOM.SIZE NETWT./LBS. INCHES INCHES
1/2 .089 11/32 11/32
3/4 .169 7/16 7/16
1 .226 9/16 9/16
11/4 .312 3/4 3/4
11/2 .566 7/8 7/8
2 .842 13/32 13/32
21/2 1.041 29/32 29/32
3 1.536 11/8 11/8
4 3.226 111/16 111/16
COUPLINGS(Cont.)
PC600-RReducingCouplingPxP–Wrot APPROX. DIM.A NOM.SIZE NETWT./LBS. INCHES
3/4x1/2 .115 15/32
1x1/2 .154 11/32 1x3/4 .165 7/16
11/4x3/4 .232 17/32
11/4x1 .218 19/32
11/2x3/4 .362 3/8
11/2x1 .227 11/16
11/2x11/4 .388 5/16
2x3/4 .508 17/32
2x1 .603 11/8
2x11/4 .603 13/16
2x11/2 .603 7/8
21/2x1 .594 29/32
21/2x11/4 .587 13/16
21/2x11/2 .606 11/16
21/2x2 .608 9/16
3x11/2 .938 11/32
3x2 .940 31/32
3x21/2 .951 1/2
4x2 1.935 11/4
4x21/2 1.807 1 4x3 1.960 27/32
COUPLINGS(Cont.)
PC600-RSCouplingPxP–Wrot APPROX. DIM.A NOM.SIZE NETWT./LBS. INCHES
21/2 .688 1/16
3 1.028 1/16
4 1.969 1/8
PC636CrossoverCouplingPxP–Wrot APPROX. DIM.A NOM.SIZE NETWT./LBS. INCHES
1/2 .402 125/32
3/4 .402 29/32
PC601(NoStop)RepairCouplingPxP–Wrot APPROX. DIM.B NOM.SIZE NETWT./LBS. INCHES
1/2 .087 13/4
3/4 .141 21/4
1 .179 21/4
11/4 .232 215/32
11/2 .464 311/32
2 .637 35/8
21/2 669 215/16
3 .979 35/16
4 1.878 45/16
ELBOWS
PC606-245°ElbowFtgxP–Wrot APPROX. DIM.B DIM.C NOM.SIZE NETWT/LBS. INCHES INCHES
1/2 .087 111/32 11/32
3/4 .155 17/16 7/16
1 .214 119/32 9/16
11/4 .295 127/32 11/16
11/2 .551 23/8 7/8
2 .551 25/8 13/32
21/2 1.050 23/16 29/32
3 1.526 219/32 15/32
4 3.284 33/32 11/2
NOTE:SomeitemsnotcertifiedbyNSFtoNSF/ANSI61.Seemanufacturer'slistingforapprovedsizesandapplications,orcontactNIBCOTechnicalServicesforacompletelistingofcurrentcertifications.
A H E A D O F T H E F L O W®www.nibco.com
NIBCO INC. WORLD HEADQUARTERS • 1516 MIDDLEBURY ST. • ELKHART, IN 46516-4740 • USA • PH: 1.800.234.0227 TECH SERVICES PH: 1.888.446.4226 • FAX: 1.888.234.0557 • INTERNATIONAL OFFICE PH: +1.574.295.3327 • FAX: +1.574.295.3455
www.nibco.com
6
Revised 3/11/2010
PC607-290°ElbowFtgxP–Wrot APPROX. DIM.B DIM.C NOM.SIZE NETWT/LBS. INCHES INCHES
1/2 .104 123/32 25/32
3/4 .193 131/32 15/32
1 .272 29/32 111/32
11/4 .619 231/32 17/8
11/2 .974 321/32 21/4
2 1.469 415/32 215/16
21/2 1.356 315/32 129/32
3 2.065 313/16 23/32
4 3.920 43/4 225/32
PC60790°ElbowPxP–Wrot APPROX. DIM.C DIM.D NOM.SIZE NETWT./LBS. INCHES INCHES
1/2 .109 3/4 3/4
3/4 .200 1 1 3/4x1/2 .190 13/16 11/16
1 .290 111/32 111/32
11/4 .402 111/16 111/16
11/2 .724 2 2 2 1.103 25/8 25/8
21/2 1.364 127/32 127/32
3 1.998 23/32 23/32
4 4.060 225/32 225/32
ELBOWS(Cont.)
PC707-390°ElbowPxF–Cast APPROX. DIM.C DIM.E NOM.SIZE NETWT./LBS. INCHES INCHES
1/2 .231 1 7/8
3/4 .374 15/32 11/16
3/4x1/2 .318 11/8 11/32
1 .611 113/32 111/32
11/4 .901 119/32 119/32
11/2 1.327 119/32 111/16
2 1.327 21/4 25/32
PC707-490°ElbowPxM–Cast APPROX. DIM.C DIM.E NOM.SIZE NETWT./LBS. INCHES INCHES
1/2 .263 11/8 123/32
3/4 .445 13/32 211/32
3/4x1/2 .445 15/16 17/8
1 .714 111/32 213/16
11/4 1.273 113/16 31/2
11/2 1.273 25/32 325/32
2 3.099 211/16 53/32
PC607-2-LT90°LongRadiusElbowFtgxP-Wrot APPROX. DIM.B DIM.C NOM.SIZE NETWT/LBS. INCHES INCHES
21/2 2.114 57/32 311/16
3 3.037 53/4 41/32
PC607-390°ElbowPxF-Wrot APPROX. DIM.A DIM.C NOM.SIZE NETWT/LBS. INCHES INCHES
1/2x3/8 .148 21/4 25/32
1/2x3/4 .243 223/32 25/32
PC607-490°ElbowPxM-Wrot APPROX. DIM.B DIM.C NOM.SIZE NETWT/LBS. INCHES INCHES
1/2x3/4 .245 211/16 25/32
PC607-LT90°LongRadiusElbowPxP–Wrot APPROX. DIM.C DIM.D NOM.SIZE NETWT/LBS. INCHES INCHES
21/2 2.066 311/16 311/16
3 2.810 41/32 41/32
4 5.696 51/4 51/4
NOTE:SomeitemsnotcertifiedbyNSFtoNSF/ANSI61.Seemanufacturer'slistingforapprovedsizesandapplications,orcontactNIBCOTechnicalServicesforacompletelistingofcurrentcertifications.
A H E A D O F T H E F L O W®www.nibco.com
NIBCO INC. WORLD HEADQUARTERS • 1516 MIDDLEBURY ST. • ELKHART, IN 46516-4740 • USA • PH: 1.800.234.0227 TECH SERVICES PH: 1.888.446.4226 • FAX: 1.888.234.0557 • INTERNATIONAL OFFICE PH: +1.574.295.3327 • FAX: +1.574.295.3455
www.nibco.com7
Revised 3/11/2010
Cont. next page
PC6951-OutletManifoldPxFtgxP-Wrot APPROX. DIMENSIONS NETWT. INCHES NOM.SIZE LBS. B C F
1x1x1/2 .522 115/16 11/8 15/16
PC6963-OutletManifoldPxFtgxP-Wrot APPROX. DIMENSIONS NETWT. INCHES NOM.SIZE LBS. B C E F
1x1x1/2 .700 121/32 3/4 131/32 63/8
MANIFOLDS
PC641CompanionFlangePxFlange-Wrot APPROX. DIMENSIONS NETWT. INCHES NOM.SIZE LBS. A B C
21/2 6.177 19/32 225/325/8
3 7.554 3/4 215/16 21/32
4 11.211 29/32 33/8 27/32
FLANGES
PC741CompanionFlangePxFlange-BronzeFlange/WrotOutlet APPROX. DIMENSIONS NETWT. INCHES NOM.SIZE LBS. B F G W
1 1.419 15/32 41/4 1/4 31/8
11/4 1.621 17/32 45/8 1/4 31/2
11/2 2.186 111/32 5 5/16 37/8
2 3.352 119/32 6 3/8 43/4
NOTE: 4" requires (8) "G" holes equally spaced.NOTE: Mates with ANSI Class 125/150 flanges.
NOTE:SomeitemsnotcertifiedbyNSFtoNSF/ANSI61.Seemanufacturer'slistingforapprovedsizesandapplications,orcontactNIBCOTechnicalServicesforacompletelistingofcurrentcertifications.
DIMENSIONSINCHES NOM.SIZE D E F G
21/2 3/4 51/2 7 3/4
3 13/16 6 71/2 3/4
4 1 71/2 9 3/4
*See online catalog at www.nibco.com
PC600-2FittingReducerFtgxP–Wrot APPROX. DIM.A NOM.SIZE NETWT/LBS. INCHES
3/4x1/2 .104 11/4
1x1/2 .133 13/4
1x3/4 .143 17/16
11/4x3/4 .211 13/8
11/4x1 .198 15/8
11/2x1/2 .269 17/8
11/2x3/4 .281 127/32
11/2x1 .267 17/8
11/2x11/4 .282 13/4
2x1/2 .461 21/4
2x3/4 .470 23/16
2x1 .374 23/4
2X11/4 .459 115/16
2x11/2 .737 23/16
21/2x1 .507 211/32
21/2x11/4 .567 29/32
21/2x11/2 .594 213/32
21/2x2 .596 131/32
3x11/4 .882 39/32
3x11/2 .812 25/8
3x2 .814 29/16
3x21/2 .820 21/4
4x2 1.670 313/32
4x21/2 1.676 31/32
4x3 2.013 31/32
FITTINGREDUCERS
ELBOWS(Cont.)
PC707-3-590°DropElbowPxF–Cast APPROX. DIMENSIONS NETWT. INCHES NOM.SIZE LBS. A C E
1/2 .283 15/32 11/32 7/8
3/4 .467 7/8 11/8 11/16
A H E A D O F T H E F L O W®www.nibco.com
NIBCO INC. WORLD HEADQUARTERS • 1516 MIDDLEBURY ST. • ELKHART, IN 46516-4740 • USA • PH: 1.800.234.0227 TECH SERVICES PH: 1.888.446.4226 • FAX: 1.888.234.0557 • INTERNATIONAL OFFICE PH: +1.574.295.3327 • FAX: +1.574.295.3455
www.nibco.com
8
Revised 3/11/2010
2x11/2x3/4 1.661113/32111/16 27/32
2x11/2x1 1.662113/32123/32 23/32
2x11/2x11/4 1.662113/32111/16 21/16
2x11/2x11/2 1.670113/32123/32123/32
2x2x1/2 1.663113/32113/32 25/16
2x2x3/4 1.558113/32113/32 29/32
2x2x1 1.591 29/32 29/32 15/16
2x2x11/4 1.664113/32113/32131/32
2x2x11/2 1.591 17/32 17/32 13/8
21/2 2.227 15/8 15/8 15/8
21/2x3/4x21/2 2.296 19/16 23/16 17/8
21/2x1x21/2 2.297 19/16 219/32 17/8
21/2x11/4x21/2 2.202 19/16 219/32 17/8
21/2x11/2x21/2 2.223 19/16 21/4 17/8
21/2x2x3/4 2.233 19/16 21/4 229/32
21/2x2x1 2.234 19/16 21/4 219/32
21/2x2x11/4 2.234 19/16 21/4 29/16
21/2x2x11/2 2.236 19/16 21/4 25/8
21/2x2x2 2.214 19/16 21/4 21/4
21/2x2x21/2 2.282 19/16 21/32 17/8
21/2x21/2x1/2 2.296 19/16 19/16 31/16
21/2x21/2x3/4 2.296 19/16 19/16 31/16
21/2x21/2x1 2.217 19/16 19/16 29/16
21/2x21/2x11/4 2.202 19/16 19/16 25/8
21/2x21/2x11/2 2.142 19/16 19/16 25/8
21/2x21/2x2 2.221 19/16 19/16 27/32
3 3.065 17/8 17/8 21/32
3x3/4x3 3.136113/16 31/4 23/16
3x1x3 3.146113/16 39/32 23/16
3x11/4x3 3.070113/16 27/8 23/16
3x11/2x3 3.110113/16215/16 23/16
3x2x2 3.068113/16213/16225/32
3x2x21/2 3.068113/16213/16 21/2
3x2x3 3.160113/16211/16 23/16
3x21/2x2 3.074113/16215/32225/32
3x21/2x21/2 3.139113/16215/32 21/2
3x21/2x3 3.194113/16215/32 23/16
3x3x1/2 3.136113/16113/16 33/8
3x3x3/4 3.136113/16113/16313/32
TEES
APPROX. DIMENSIONS NETWT. INCHES NOM.SIZE LBS. C F G
APPROX. DIMENSIONS NETWT. INCHES NOM.SIZE LBS. C F G
3x3x1 3.173 113/16 113/16 31/4
3x3x11/4 3.070 113/16 113/16 215/16
3x3x11/2 3.110 113/16 113/16 3 3x3x2 3.177 113/16 113/16 215/32
3x3x21/2 3.183 129/32 129/32 23/8
4 7.436 213/32 213/32 217/32
4x2x4 7.452 23/8 41/32 223/32
4x21/2x4 7.591 23/8 325/32 223/32
4x3x2 7.321 23/8 39/16 33/4
4x3x21/2 7.376 23/8 39/16 329/32
4x3x3 7.485 23/8 39/16 31/2
4x3x4 7.536 23/8 323/32 223/32
4x4x1/2 7.553 23/8 23/8 415/32
4x4x3/4 7.553 23/8 23/8 41/8
4x4x1 7.390 23/8 23/8 45/32
4x4x11/4 7.554 23/8 23/8 41/32
4x4x11/2 7.556 23/8 23/8 33/4
4x4x2 7.394 23/8 23/8 315/16
4x4x21/2 7.438 23/8 23/8 329/32
4x4x3 7.526 23/8 23/8 31/2
PC611TeePxPxP–Wrot APPROX. DIMENSIONS NETWT. INCHES NOM.SIZE LBS. C F G
1/2 .214 3/4 3/4 15/32
1/2x1/2x3/4 .261 3/4 3/4 9/16
1/2x1/2x1 .491 13/16 13/16 29/32
3/4 .377 7/8 7/8 9/16
3/4x1/2x1/2 .321 3/4 1 11/16
3/4x1/2x3/4 .333 27/32 17/32 5/8
3/4x3/4x1/2 .298 11/16 11/16 19/32
3/4x3/4x1 .356 29/32 29/32 21/32
1 .489 31/32 31/32 13/16
1x1/2x1 .507 15/16 13/16 29/32
1x3/4x1/2 .368 11/16 29/32 3/4
1x3/4x3/4 .448 13/16 11/16 25/32
1x3/4x1 .524 15/16 1 29/32
1x1x1/2 .400 3/4 3/4 3/4
1x1x3/4 .469 13/16 13/16 3/4
1x1x11/4 .723 17/32 17/32 29/32
11/4 .644 11/16 11/16 15/16
11/4x1x3/4 .731 1 17/32 13/8
11/4x1x1 .725 31/32 17/32 15/32
11/4x11/4x1/2 .747 1 1 17/16
11/4x11/4x3/4 .734 1 1 13/8
11/4x11/4x1 .595 29/32 29/32 27/32
11/2 1.153 13/16 13/16 13/16
11/2x1/2x11/2 1.227 31/32 17/8 1 11/2x3/4x3/4 1.224 31/32 123/32 15/8
11/2x1x3/4 1.225 31/32 119/32121/32
11/2x1x1 1.226 31/32 119/32119/32
11/2x1x11/2 1.228 31/32 15/8 1 11/2x11/4x1 1.226 31/32 17/16 19/16
11/2x11/4x11/4 1.226 31/32 17/16 115/32
11/2x11/2x1/2 .845 5/8 5/8 15/32
11/2x11/2x3/4 .845 23/32 23/32 7/32
11/2x11/2x1 .845 13/16 13/16 5/32
11/2x11/2x11/4 1.228 31/32 31/32 17/16
2 1.591 13/8 13/8 13/8
2x1/2x2 1.663113/32 23/8 113/32
2x1x1 1.660113/32 23/32 23/32
2x1x2 1.664113/32 21/8 113/32
2x11/4x11/4 1.660113/32127/32 17/8
A H E A D O F T H E F L O W®www.nibco.com
NIBCO INC. WORLD HEADQUARTERS • 1516 MIDDLEBURY ST. • ELKHART, IN 46516-4740 • USA • PH: 1.800.234.0227 TECH SERVICES PH: 1.888.446.4226 • FAX: 1.888.234.0557 • INTERNATIONAL OFFICE PH: +1.574.295.3327 • FAX: +1.574.295.3455
www.nibco.com9
Revised 3/11/2010
PC712TeePxPxF–Cast APPROX. DIMENSIONS NETWT. INCHES NOM.SIZE LBS. E F G
1/2 .369 11/2 15/16 15/16
3/4x3/4x1/2 .513 111/16 1 1 1x1x1/2 .583 123/32 1 111/2x11/2x1/2 .983 111/16 3/4 3/4
2x2x1/2 1.479 23/16 1 1
TEES (Cont.)
PC612TeePxPxF-Wrot APPROX. DIMENSIONS NETWT. INCHES NOM.SIZE LBS. E F G
1x1x3/4 .656 213/16 15/16 15/16
11/4x11/4x1/2 .832 27/8 1 1 11/4x11/4x3/4 .896 31/16 1 1 11/2x11/2x3/4 1.197 33/8 31/32 31/32
2x2x3/4 1.693 331/32 113/32 113/32
21/2x21/2x3/4 1.049215/32 11/16 11/16
21/2x21/2x2 1.633 37/32 19/32 19/32
3x3x3/4 1.435 23/4 11/16 11/16
3x3x2 2.097315/3219/32 19/32
4x4x3/4 2.786 31/4 11/16 11/16
4x4x2 3.675 4 19/32 19/32
PC733UnionPxP–BrassRod APPROX. DIM.A NOM.SIZE NETWT./LBS. INCHES
1/2 .334 11/4
3/4 .540 19/32
1 .940 17/8
11/4 1.273 13/4
11/2 2.061 27/32
2 3.210 21/8
ACCESSORIES
PC733-3UnionPxF–BrassRod APPROX. DIM.A NOM.SIZE NETWT./LBS. INCHES
1/2 .304 11/2
3/4 .461 19/16
1 .848 115/16
11/4 1.098 21/32
11/2 1.885 29/16
2 2.965 215/32
PC733-4UnionPxM–BrassRod APPROX. DIM.A NOM.SIZE NETWT./LBS. INCHES
1/2 .340 21/16
3/4 .560 23/16
1 1.010 223/32
11/4 1.269 23/4
11/2 1.952 311/32
2 3.196 37/32
UNIONS
EPDMSeal PART SIZE No.
1/2 T048052 3/4 T048054 1 T048056 11/4 T048058 11/2 T048060 2 T048062 21/2 T048064 3 T048066 4 T048070
A H E A D O F T H E F L O W®www.nibco.com
NIBCO INC. WORLD HEADQUARTERS • 1516 MIDDLEBURY ST. • ELKHART, IN 46516-4740 • USA • PH: 1.800.234.0227 TECH SERVICES PH: 1.888.446.4226 • FAX: 1.888.234.0557 • INTERNATIONAL OFFICE PH: +1.574.295.3327 • FAX: +1.574.295.3455
www.nibco.com
10
Revised 3/11/2010
A H E A D O F T H E F L O W®www.nibco.com
NIBCO INC. WORLD HEADQUARTERS • 1516 MIDDLEBURY ST. • ELKHART, IN 46516-4740 • USA • PH: 1.800.234.0227 TECH SERVICES PH: 1.888.446.4226 • FAX: 1.888.234.0557 • INTERNATIONAL OFFICE PH: +1.574.295.3327 • FAX: +1.574.295.3455
www.nibco.com11
Revised 3/11/2010
Valves
A H E A D O F T H E F L O W®www.nibco.com
NIBCO INC. WORLD HEADQUARTERS • 1516 MIDDLEBURY ST. • ELKHART, IN 46516-4740 • USA • PH: 1.800.234.0227 TECH SERVICES PH: 1.888.446.4226 • FAX: 1.888.234.0557 • INTERNATIONAL OFFICE PH: +1.574.295.3327 • FAX: +1.574.295.3455
www.nibco.com
12
Revised 3/11/2010
NIBCO®PressSystem®
IllustratedValveIndexPF585-70
PF585-70-66BronzeBallValve
•PressxPressFemaleEnd•FullPort,Blowout-ProofStem•StandardLeverHandle•600PSICWP•Sizes1/2"thru2"
Page15,16
PF585-70-NSPF585-70-66-NS
BronzeBallValve
•PressxPressFemaleEnd•FullPort,Blowout-ProofStem•NIB-SEAL®Handle•600PSICWP•Sizes1/2"thru2"
Page17,18
PF585-70-LLPF585-70-66-LL
BronzeBallValve
•PressxPressFemaleEnd•FullPort,Blowout-ProofStem•LockingLeverHandle•600PSICWP•Sizes1/2"thru2"
Page19,20
PF585-70-HCBronzeBallValve
•PressxPressFemaleEnd•FullPort,Blowout-ProofStem•StandardLeverHandle•BlowDown,EndofLine•HoseCapwithChain•600PSICWP•Sizes1/2"and3/4"
Page21
PFFP-600BrassBallValve
•PressxPressFemaleEnd•FullPort,Blowout-ProofStem•StandardLeverHandle•600PSICWP•Sizes1/2"thru2"
Page22
PF111BronzeGateValve
•PressxPressFemaleEnd•RisingStem•200PSICWP•Sizes1/2"thru2"
Page23
PF113BronzeGateValve
•PressxPressFemaleEnd•Non-RisingStem•200PSICWP•Sizes1/2"thru2"
Page24
PF211-YBronzeGlobeValve
•PressxPressFemaleEnd•PTFEResilientSeat•200PSICWP•Sizes1/2"thru2"
Page25
Note: Ball valves are down-rated from 600 PSI CWP to 200 PSI CWP to match the Press System.
A H E A D O F T H E F L O W®www.nibco.com
NIBCO INC. WORLD HEADQUARTERS • 1516 MIDDLEBURY ST. • ELKHART, IN 46516-4740 • USA • PH: 1.800.234.0227 TECH SERVICES PH: 1.888.446.4226 • FAX: 1.888.234.0557 • INTERNATIONAL OFFICE PH: +1.574.295.3327 • FAX: +1.574.295.3455
www.nibco.com13
Revised 3/11/2010
NIBCO®PressSystem®
IllustratedValveIndexPF311-Y
BronzeAngleValve
•PressxPressFemaleEnd•PTFEResilientSeat•200PSICWP•Sizes1/2"thru2"
Page26
PF413-YBronzeSwingCheckValve
•PressxPressFemaleEnd•PTFESeat•200PSICWP•Sizes1/2"thru2"
Page27
PF480-YBronzeIn-LineCheckValve
•PressxPressFemaleEnd•PTFESeat,StainlessInternals•250PSICWP•Sizes1/2"thru2"
Page28
PFD2000SeriesDuctileIronButterflyValve
•PressxPressFemaleEnd•Molded-inLiner•AluminumBronzeDisc•StandardLeverHandleorGear
Operated•200PSICWP•Sizes21/2"thru4"
Page29
PS585-70PS585-70-66BronzeBallValve
•PressxPressMaleEnd•2"TypeLCopper•FullPort,Blowout-ProofStem•StandardLeverHandle•600PSICWP•Sizes1/2"thru2"
Page30,31
PS585-70-NSPS585-70-66-NS
BronzeBallValve
•PressxPressMaleEnd•2"TypeLCopper•FullPort,Blowout-ProofStem•NIB-SEAL®Handle•600PSICWP•Sizes1/2"thru2"
Page32,33
PS585-70-HCBronzeBallValve
•PressxPressMaleEnd•2"TypeLCopper•FullPort,Blowout-ProofStem•StandardLeverHandle•BlownDown,EndofLine•HoseCapwithChain•600PSICWP•Sizes1/2"and3/4"
Page34
PS111BronzeGateValve
•PressxPressMaleEnd•2"TypeLCopper•RisingStem•200PSICWP•Sizes1/2"thru2"
Page35
Note: Ball valves are down-rated from 600 PSI CWP to 200 PSI CWP to match the Press System.
Note: Check valves are down-rated from 250 PSI CWP to 200 PSI CWP to match the Press System.
A H E A D O F T H E F L O W®www.nibco.com
NIBCO INC. WORLD HEADQUARTERS • 1516 MIDDLEBURY ST. • ELKHART, IN 46516-4740 • USA • PH: 1.800.234.0227 TECH SERVICES PH: 1.888.446.4226 • FAX: 1.888.234.0557 • INTERNATIONAL OFFICE PH: +1.574.295.3327 • FAX: +1.574.295.3455
www.nibco.com
14
Revised 3/11/2010
NIBCO®PressSystem®
IllustratedValveIndexPS113
BronzeGateValve
•PressxPressMaleEnd•2"TypeLCopper•Non-RisingStem•200PSICWP•Sizes1/2"thru2"
Page36
PS211-YBronzeGlobeValve
•PressxPressMaleEnd•2"TypeLCopper•PTFEResilientSeat•200PSICWP•Sizes1/2"thru2"
Page37
PS311-YBronzeAngleValve
•PressxPressMaleEnd•2"TypeLCopper•PTFEResilientSeat•200PSICWP•Sizes1/2"thru2"
Page38
PS413-YBronzeSwingCheckValve
•PressxPressMaleEnd•2"TypeLCopper•PTFESeat•200PSICWP•Sizes1/2"thru2"
Page39
PS480-YBronzeIn-LineCheckValve
•PressxPressMaleEnd•2"TypeLCopper•PTFESeat,StainlessInternals•250PSICWP•Sizes1/2"thru2"
Page40
PCM480-YBronzeIn-LineCheckValve
•PressxPressMaleEnd•DoubleUnionDesign•PTFESeat,StainlessInternals•Repairable•250PSICWP•Sizes1/2"thru2"
Page41
PCM585-60BronzeBallValve
•PressxPressMaleEnd•DoubleUnionDesign•FullPort316SSBall•Repairable•600PSICWP•Sizes1/2"thru2"
Page42
Note: Ball valves are down-rated from 600 PSI CWP to 200 PSI CWP to match the Press System.Note: Check valves are down-rated from 250 PSI CWP to 200 PSI CWP to match the Press System.
PF221/222-A/BBronzeY-Strainer
•PressxPressFemaleEnd•Tappedcapw/blow-offplug
orsolidcap•20MeshSSScreenor
SSPerforatedScreen•200PSICWP•Sizes1/2"thru2"
Page43
A H E A D O F T H E F L O W®www.nibco.com
NIBCO INC. WORLD HEADQUARTERS • 1516 MIDDLEBURY ST. • ELKHART, IN 46516-4740 • USA • PH: 1.800.234.0227 TECH SERVICES PH: 1.888.446.4226 • FAX: 1.888.234.0557 • INTERNATIONAL OFFICE PH: +1.574.295.3327 • FAX: +1.574.295.3455
www.nibco.com15
Revised 3/11/2010
Note: Check valves are down-rated from 250 PSI CWP to 200 PSI CWP to match the Press System.
DezincificationResistant
NIBCO®PressSystem®BronzeBallValvesTwo-PieceBody•FullPort•BronzeTrim•Blowout-ProofStem
600PSI/41.4BarNon-ShockColdWorkingPressure250°FMaximumOperatingTemperature
CONFORMSTOMSSSP-110
MATERIALLIST PART SPECIFICATION 1. HandleNut ZincPlatedSteel 2. HandleAssembly ZincPlatedSteelwithPlastisolCover 3. PackGland BrassASTMB16AlloyC36000 4. Packing PTFE 5. Stem SiliconBronzeASTMB371AlloyC69430 6. ThrustWasher RPTFE 7. Ball BrassASTMB16AlloyC36000 orASTMB124C37700(Chrome/NickelPlated) 8. SeatRing(2) RPTFE 9. Body BronzeASTMB584AlloyC84400 10. BodyEndPiece BronzeASTMB584AlloyC84400 11. FemaleAdapter(2) BronzeASTMB61AlloyC92200 12. O-Ring(2) EPDM
DIMENSIONS—WEIGHTS Dimensions Size A B C D Weight
In. mm. In. mm. In. mm. In. mm. In. mm. Lbs. Kg. ¹⁄₂ 15 2.78 71 1.88 48 6.19 157 .50 13 .74 .34 ³⁄₄ 20 3.49 89 2.25 57 7.40 188 .75 19 1.46 .66 1 25 4.00 102 2.38 60 7.78 197 1.00 25 2.19 .99 1¹⁄₄ 32 5.32 135 3.00 76 10.45 265 1.25 32 3.60 1.63 1¹⁄₂ 40 6.26 159 3.16 80 11.16 284 1.50 38 5.58 2.53 2 50 7.01 178 3.50 89 11.85 301 2.00 51 8.36 3.79
PF585-70PxP
NIBCO®PressSystem®ballvalvesaredesignedtomeetMSSSP-110withtheexceptionoftheendconnection.Ballvalvesaredown-ratedfrom600PSICWPto200PSICWPtomatchthePressSystem®.Maleandfemalepress-to-connectendsarenewtechnologynotyetcoveredinthecurrenteditionofthisspecification.
PF585-70PressxPressFemaleEnd
A H E A D O F T H E F L O W®www.nibco.com
NIBCO INC. WORLD HEADQUARTERS • 1516 MIDDLEBURY ST. • ELKHART, IN 46516-4740 • USA • PH: 1.800.234.0227 TECH SERVICES PH: 1.888.446.4226 • FAX: 1.888.234.0557 • INTERNATIONAL OFFICE PH: +1.574.295.3327 • FAX: +1.574.295.3455
www.nibco.com
16
Revised 3/11/2010
NIBCO®PressSystem®BronzeBallValves
PF585-70-66PxP
DezincificationResistantTwo-PieceBody•FullPort•StainlessTrim•Blowout-ProofStem•VentedBall
600PSI/41.4BarNon-ShockColdWorkingPressure250°FMaximumOperatingTemperature
CONFORMSTOMSSSP-110
PF585-70-66PressxPressFemaleEnd
MATERIALLIST PART SPECIFICATION 1. HandleNut ZincPlatedSteel 2. HandleAssembly ZincPlatedSteelwithPlastisolCover 3. PackGland BrassASTMB16AlloyC36000 4. Packing PTFE 5. Stem StainlessSteelASTMA276S31600or ASTMA351TypeCF8M 6. ThrustWasher RPTFE 7. Ball StainlessSteelASTMA276S31600or ASTMA351TypeCF8M 8. SeatRing(2) RPTFE 9. Body BronzeASTMB584AlloyC84400 10. BodyEndPiece BronzeASTMB584AlloyC84400 11. FemaleAdapter(2) BronzeASTMB61AlloyC92200 12. O-Ring(2) EPDM
NIBCO®PressSystem®ballvalvesaredesignedtomeetMSSSP-110withtheexceptionoftheendconnection.Ballvalvesaredown-ratedfrom600PSICWPto200PSICWPtomatchthePressSystem®.Maleandfemalepress-to-connectendsarenewtechnologynotyetcoveredinthecurrenteditionofthisspecification.
DIMENSIONS—WEIGHTS Dimensions Size A B C D Weight
In. mm. In. mm. In. mm. In. mm. In. mm. Lbs. Kg. ¹⁄₂ 15 2.78 71 1.88 48 6.19 157 .50 13 .76 .34 ³⁄₄ 20 3.49 89 2.25 57 7.40 188 .75 19 1.50 .68 1 25 4.00 102 2.38 60 7.78 197 1.00 25 2.44 1.11 1¹⁄₄ 32 5.32 135 3.00 76 10.45 265 1.25 32 3.89 1.76 1¹⁄₂ 40 6.26 159 3.16 80 11.16 284 1.50 38 6.11 2.77 2 50 7.01 178 3.50 89 11.85 301 2.00 51 9.42 4.27
A H E A D O F T H E F L O W®www.nibco.com
NIBCO INC. WORLD HEADQUARTERS • 1516 MIDDLEBURY ST. • ELKHART, IN 46516-4740 • USA • PH: 1.800.234.0227 TECH SERVICES PH: 1.888.446.4226 • FAX: 1.888.234.0557 • INTERNATIONAL OFFICE PH: +1.574.295.3327 • FAX: +1.574.295.3455
www.nibco.com17
Revised 3/11/2010
NIBCO®PressSystem®BronzeBallValvesTwo-PieceBody•FullPort•NIB-SEAL®Handle
600PSI/41.4BarNon-ShockColdWorkingPressure250°F Maximum Operating Temperature
PF585-70-NSPressxPressFemaleEnd
PF585-70-NSPxP
1. Cap Plastic 2. Insulation Styrofoam 3. ExtensionHandle Plastic 4. Sleeve ClearPlastic 5. HandleNut ZincPlatedSteel 6. Screw ZincPlatedSteel 7. MemoryStopPlate ZincPlatedSteel 8. BasePlate ZincPlatedSteel 9. ThreadPackGland BrassASTMB16AlloyC36000 10. Packing PTFE 11. Stem SiliconBronzeASTMB371AlloyC69430 12. BodyEnd BronzeASTMB584AlloyC84400 13. ThrustWasher RPTFE 14. Ball BrassASTMB16AlloyC36000orASTMB124 AlloyC37700(Chrome/NickelPlated) 15. SeatRing(2) ReinforcedPTFE 16. Body BronzeASTMB584AlloyC84000 17. FemaleAdapter(2) BronzeASTMB61AlloyC92200 18. O-Ring(2) EPDM
MATERIALLIST PART SPECIFICATION
DezincificationResistant
CONFORMSTOMSSSP-110
DIMENSIONS—WEIGHTS Dimensions Size A C E F Weight
In. mm. In. mm. In. mm. In. mm. In. mm. Lbs. Kg. ¹⁄₂ 15 2.78 71 3.75 95 2.19 56 4.25 108 .74 .34 ³⁄₄ 20 3.49 89 4.00 101 2.19 56 4.25 108 1.46 .66 1 25 4.00 102 4.25 108 2.19 56 4.25 108 2.19 1.00 1¹⁄₄ 32 5.32 135 5.38 137 3.38 86 6.50 165 3.60 1.64 1¹⁄₂ 40 6.26 159 5.56 141 3.38 86 6.50 165 5.58 2.54 2 50 7.01 178 5.88 149 3.38 86 6.50 165 8.36 3.80
NIBCO®PressSystem®ballvalvesaredesignedtomeetMSSSP-110withtheexceptionoftheendconnection.Ballvalvesaredown-ratedfrom600PSICWPto200PSICWPtomatchthePressSystem®.Maleandfemalepress-to-connectendsarenewtechnologynotyetcoveredinthecurrenteditionofthisspecification.
A H E A D O F T H E F L O W®www.nibco.com
NIBCO INC. WORLD HEADQUARTERS • 1516 MIDDLEBURY ST. • ELKHART, IN 46516-4740 • USA • PH: 1.800.234.0227 TECH SERVICES PH: 1.888.446.4226 • FAX: 1.888.234.0557 • INTERNATIONAL OFFICE PH: +1.574.295.3327 • FAX: +1.574.295.3455
www.nibco.com
18
Revised 3/11/2010
NIBCO®PressSystem®BronzeBallValvesTwo-PieceBody•FullPort•316SSBall&Stem•NIB-SEAL®Handle
600PSI/41.4BarNon-ShockColdWorkingPressure250°F Maximum Operating Temperature
PF585-70-66-NSPressxPressFemaleEnd
PF585-70-66-NSPxP
1. Cap Plastic 2. Insulation Styrofoam 3. ExtensionHandle Plastic 4. Sleeve ClearPlastic 5. HandleNut ZincPlatedSteel 6. Screw ZincPlatedSteel 7. MemoryStopPlate ZincPlatedSteel 8. BasePlate ZincPlatedSteel 9. ThreadPackGland BrassASTMB16AlloyC36000 10. Packing PTFE 11. Stem ASTMA276AlloyS31600StainlessSteel 12. BodyEnd BronzeASTMB584AlloyC84400 13. ThrustWasher RPTFE 14. Ball ASTMA276AlloyS31600StainlessSteel 15. SeatRing(2) ReinforcedPTFE 16. Body BronzeASTMB584AlloyC84000 17. FemaleAdapter(2) BronzeASTMB61AlloyC92200 18. O-Ring(2) EPDM
MATERIALLIST PART SPECIFICATION
DezincificationResistant
CONFORMSTOMSSSP-110
DIMENSIONS—WEIGHTS Dimensions Size A C E F Weight
In. mm. In. mm. In. mm. In. mm. In. mm. Lbs. Kg. ¹⁄₂ 15 2.78 71 3.75 95 2.19 56 4.25 108 .74 .34 ³⁄₄ 20 3.49 89 4.00 101 2.19 56 4.25 108 1.46 .66 1 25 4.00 102 4.25 108 2.19 56 4.25 108 2.19 1.00 1¹⁄₄ 32 5.32 135 5.38 137 3.38 86 6.50 165 3.60 1.64 1¹⁄₂ 40 6.26 159 5.56 141 3.38 86 6.50 165 5.58 2.54 2 50 7.01 178 5.88 149 3.38 86 6.50 165 8.36 3.80
NIBCO®PressSystem®ballvalvesaredesignedtomeetMSSSP-110withtheexceptionoftheendconnection.Ballvalvesaredown-ratedfrom600PSICWPto200PSICWPtomatchthePressSystem®.Maleandfemalepress-to-connectendsarenewtechnologynotyetcoveredinthecurrenteditionofthisspecification.
A H E A D O F T H E F L O W®www.nibco.com
NIBCO INC. WORLD HEADQUARTERS • 1516 MIDDLEBURY ST. • ELKHART, IN 46516-4740 • USA • PH: 1.800.234.0227 TECH SERVICES PH: 1.888.446.4226 • FAX: 1.888.234.0557 • INTERNATIONAL OFFICE PH: +1.574.295.3327 • FAX: +1.574.295.3455
www.nibco.com19
Revised 3/11/2010
DezincificationResistant
NIBCO®PressSystem®BronzeBallValvesTwo-PieceBody•FullPort•BronzeTrim•Blowout-ProofStem•LockingHandle
600PSI/41.4BarNon-ShockColdWorkingPressure250°FMaximumOperatingTemperature
CONFORMSTOMSSSP-110
MATERIALLIST PART SPECIFICATION 1. HandleNut ZincPlatedSteel 2. LockingHandle ZincPlatedSteelwithPlastisolCover 3. PackGland BrassASTMB16AlloyC36000 4. Packing PTFE 5. Stem SiliconBronzeASTMB371AlloyC69430 6. ThrustWasher RPTFE 7. Ball BrassASTMB16AlloyC36000 orASTMB124C37700(Chrome/NickelPlated) 8. SeatRing(2) RPTFE 9. Body BronzeASTMB584AlloyC84400 10. BodyEndPiece BronzeASTMB584AlloyC84400 11. FemaleAdapter(2) BronzeASTMB61AlloyC92200 12. O-Ring(2) EPDM
DIMENSIONS—WEIGHTS Dimensions Size A B C D Weight
In. mm. In. mm. In. mm. In. mm. In. mm. Lbs. Kg. ¹⁄₂ 15 2.78 71 1.88 48 6.19 157 .50 13 .74 .34 ³⁄₄ 20 3.49 89 2.25 57 7.40 188 .75 19 1.46 .66 1 25 4.00 102 2.38 60 7.78 197 1.00 25 2.19 .99 1¹⁄₄ 32 5.32 135 3.00 76 10.45 265 1.25 32 3.60 1.63 1¹⁄₂ 40 6.26 159 3.16 80 11.16 284 1.50 38 5.58 2.53 2 50 7.01 178 3.50 89 11.85 301 2.00 51 8.36 3.79
PF585-70-LLPxP
NIBCO®PressSystem®ballvalvesaredesignedtomeetMSSSP-110withtheexceptionoftheendconnection.Ballvalvesaredown-ratedfrom600PSICWPto200PSICWPtomatchthePressSystem®.Maleandfemalepress-to-connectendsarenewtechnologynotyetcoveredinthecurrenteditionofthisspecification.
PF585-70-LLPressxPressFemaleEnd
A H E A D O F T H E F L O W®www.nibco.com
NIBCO INC. WORLD HEADQUARTERS • 1516 MIDDLEBURY ST. • ELKHART, IN 46516-4740 • USA • PH: 1.800.234.0227 TECH SERVICES PH: 1.888.446.4226 • FAX: 1.888.234.0557 • INTERNATIONAL OFFICE PH: +1.574.295.3327 • FAX: +1.574.295.3455
www.nibco.com
20
Revised 3/11/2010
NIBCO®PressSystem®BronzeBallValves
PF585-70-66-LLPxP
DezincificationResistantTwo-PieceBody•FullPort•StainlessTrim•Blowout-ProofStem•VentedBall
•LockingHandle
600PSI/41.4BarNon-ShockColdWorkingPressure250°FMaximumOperatingTemperature
CONFORMSTOMSSSP-110
PF585-70-66-LLPressxPressFemaleEnd
MATERIALLIST PART SPECIFICATION 1. HandleNut ZincPlatedSteel 2. LockingHandle ZincPlatedSteelwithPlastisolCover 3. PackGland BrassASTMB16AlloyC36000 4. Packing PTFE 5. Stem StainlessSteelASTMA276S31600or ASTMA351TypeCF8M 6. ThrustWasher RPTFE 7. Ball StainlessSteelASTMA276S31600or ASTMA351TypeCF8M 8. SeatRing(2) RPTFE 9. Body BronzeASTMB584AlloyC84400 10. BodyEndPiece BronzeASTMB584AlloyC84400 11. FemaleAdapter(2) BronzeASTMB61AlloyC92200 12. O-Ring(2) EPDM
NIBCO®PressSystem®ballvalvesaredesignedtomeetMSSSP-110withtheexceptionoftheendconnection.Ballvalvesaredown-ratedfrom600PSICWPto200PSICWPtomatchthePressSystem®.Maleandfemalepress-to-connectendsarenewtechnologynotyetcoveredinthecurrenteditionofthisspecification.
DIMENSIONS—WEIGHTS Dimensions Size A B C D Weight
In. mm. In. mm. In. mm. In. mm. In. mm. Lbs. Kg. ¹⁄₂ 15 2.78 71 1.88 48 6.19 157 .50 13 .76 .34 ³⁄₄ 20 3.49 89 2.25 57 7.40 188 .75 19 1.50 .68 1 25 4.00 102 2.38 60 7.78 197 1.00 25 2.44 1.11 1¹⁄₄ 32 5.32 135 3.00 76 10.45 265 1.25 32 3.89 1.76 1¹⁄₂ 40 6.26 159 3.16 80 11.16 284 1.50 38 6.11 2.77 2 50 7.01 178 3.50 89 11.85 301 2.00 51 9.42 4.27
A H E A D O F T H E F L O W®www.nibco.com
NIBCO INC. WORLD HEADQUARTERS • 1516 MIDDLEBURY ST. • ELKHART, IN 46516-4740 • USA • PH: 1.800.234.0227 TECH SERVICES PH: 1.888.446.4226 • FAX: 1.888.234.0557 • INTERNATIONAL OFFICE PH: +1.574.295.3327 • FAX: +1.574.295.3455
www.nibco.com21
Revised 3/11/2010
NIBCO®PressSystem®BronzeBallValvesTwo-PieceBody•FullPort•BronzeTrim•Blowout-ProofStem•3/4"HoseConnectionw/CapandChain
600PSI/41.4BarNon-ShockColdWorkingPressure250°FMaximumOperatingTemperature
CONFORMSTOMSSSP-110
MATERIALLIST PART SPECIFICATION 1. HandleNut ZincPlatedSteel 2. HandleAssembly ZincPlatedSteelwithPlastisolCover 3. PackGland BrassASTMB16AlloyC36000 4. Packing PTFE 5. ThrustWasher RPTFE 6. Stem SiliconBronzeASTMB371AlloyC69430 7. Ball BrassASTMB16AlloyC36000 orASTMB124C37700(Chrome/NickelPlated) 8. SeatRing(2) RPTFE 9. Body BronzeASTMB584AlloyC84400 10. HoseBodyEnd BrassASTMB124AlloyC37700 11. Cap DieCastBrass 12. Gasket Rubber 13. Chain Brass 14. FemaleAdapter BronzeASTMB61AlloyC92200 15. O-Ring EPDM
DIMENSIONS—WEIGHTS Dimensions Size A B C Weight
In. mm. In. mm. In. mm. In. mm. Lbs.Kg. ¹⁄₂ 15 3.01 76 1.88 48 6.13 156 .78 .35 ³⁄₄ 20 3.59 91 2.25 57 7.40 188 1.54 .70
PF585-70-HCPxHose
NIBCO®PressSystem®ballvalvesaredesignedtomeetMSSSP-110withtheexceptionoftheendconnection.Ballvalvesaredown-ratedfrom600PSICWPto200PSICWPtomatchthePressSystem®.Maleandfemalepress-to-connectendsarenewtechnologynotyetcoveredinthecurrenteditionofthisspecification.
PF585-70-HCPressFemalexHoseEnd
A H E A D O F T H E F L O W®www.nibco.com
NIBCO INC. WORLD HEADQUARTERS • 1516 MIDDLEBURY ST. • ELKHART, IN 46516-4740 • USA • PH: 1.800.234.0227 TECH SERVICES PH: 1.888.446.4226 • FAX: 1.888.234.0557 • INTERNATIONAL OFFICE PH: +1.574.295.3327 • FAX: +1.574.295.3455
www.nibco.com
22
Revised 3/11/2010
NIBCO®PressSystem®BrassBallValvesTwo-PieceBody•FullPort•BrassTrim•Blowout-ProofStem•PTFESeats
600PSI/41.4BarNon-ShockColdWorkingPressure250°FMaximumOperatingTemperature
CONFORMSTOMSSSP-110
MATERIALLIST PART SPECIFICATION 1. Handle PlatedSteelwithPlastisolCover 2. HandleNut PlatedSteel 3. PackGland BrassASTMB16AlloyC36000 4. Packing,Stem VirginPTFE 5. FlatWasher 430Stainless 6. O-Ring(StemSeal) Fluorocarbon(FKM) 7. ThrustWasher ReinforcedPTFE
8. Stem 1/2"-1" BrassASTMB16AlloyC36000 11/4"-2" SiliconBronzeASTMB371Alloy69400or69430 9. Body ForgedBrassASTMB283AlloyC37700 10. SeatRing(2) VirginPTFE
11. Ball 1/2"-3/4" BrassASTMB16AlloyC36000 (Chrome/NickelPlated) 1"-2" ForgedBrassASTMB124AlloyC37700 (Chrome/NickelPlated) 12. BodyEndPiece ForgedBrassASTMB283AlloyC37700 13. FemaleAdapter(2) BronzeASTMB61AlloyC92200 14. O-Ring(2) EPDM
DIMENSIONS—WEIGHTS Dimensions Size A B C D Weight
In. mm. In. mm. In. mm. In. mm. In. mm. Lbs. Kg. ¹⁄₂ 15 2.37 60 3.90 99 1.95 50 0.50 13 .54 1.19 ³⁄₄ 20 3.18 81 4.66 118 2.30 58 0.75 19 1.16 2.55 1 25 3.84 98 4.66 118 2.50 64 1.00 25 1.61 3.54 1¹⁄₄ 32 4.34 110 6.69 170 3.05 78 1.25 32 2.63 5.79 1¹⁄₂ 40 4.88 124 6.69 170 3.23 82 1.50 38 3.69 8.12 2 50 6.04 153 6.69 170 3.55 90 2.00 51 5.76 12.68
PFFP600PxP
NIBCO®PressSystem®ballvalvesaredesignedtomeetMSSSP-110withtheexceptionoftheendconnection.Ballvalvesaredown-ratedfrom600PSICWPto200PSICWPtomatchthePressSystem®.Maleandfemalepress-to-connectendsarenewtechnologynotyetcoveredinthecurrenteditionofthisspecification.
PFFP600PressxPressFemaleEnd
A H E A D O F T H E F L O W®www.nibco.com
NIBCO INC. WORLD HEADQUARTERS • 1516 MIDDLEBURY ST. • ELKHART, IN 46516-4740 • USA • PH: 1.800.234.0227 TECH SERVICES PH: 1.888.446.4226 • FAX: 1.888.234.0557 • INTERNATIONAL OFFICE PH: +1.574.295.3327 • FAX: +1.574.295.3455
www.nibco.com23
Revised 3/11/2010
DIMENSIONS—WEIGHTS Dimensions
Size A B C Weight In. mm. In. mm. In. mm. In. mm. Lbs. Kg.¹⁄₂† 15 1.97 50 4.81 122 .50 13 .84 .38 ³⁄₄ 20 2.62 67 5.81 148 .75 19 1.30 .59 1 25 3.07 78 7.09 180 1.00 25 2.09 .95 1¹⁄₄ 32 3.36 85 8.13 206 1.25 32 2.95 1.34 1¹⁄₂ 40 3.70 94 9.81 249 1.50 38 4.16 1.89 2 50 4.28 109 11.56 294 2.00 51 6.79 3.09† No packing gland, packing only in this size.
DezincificationResistant
NIBCO®PressSystem®BronzeGateValvesScrew-inBonnet•RisingStem•SolidWedge
200 PSI/13.8 Bar Non-Shock Cold Working Pressure250°F Maximum Operating Temperature
CONFORMSTOMSSSP-80
PF111PressxPressFemaleEnd
PF111PxP
MATERIALLIST PART SPECIFICATION 1. HandwheelNut 300SeriesStainlessSteel 2. IdentificationPlate Aluminum 3. Handwheel MalleableIronASTMA47 4. Stem SiliconBronzeASTMB371AlloyC69430 orASTMB99AlloyC65100 5. PackNut BrassASTMB16AlloyC36000 6. PackGland BrassASTMB16AlloyC36000 7. Packing AramidFiberswithGraphite 8. Bonnet BronzeASTMB62AlloyC83600 9. BodyAssembly BronzeASTMB62AlloyC83600 10. Wedge BronzeASTMB62AlloyC83600 11. FemaleAdapter(2) BronzeASTMB61AlloyC92200 12. O-Ring(2) EPDM
NIBCO®PressSystem®gatevalvesaredesignedtomeetMSSSP-80withtheexceptionoftheendconnection.Maleandfemalepress-to-connectendsarenewtechnologynotyetcoveredinthecurrenteditionofthisspecification.
A H E A D O F T H E F L O W®www.nibco.com
NIBCO INC. WORLD HEADQUARTERS • 1516 MIDDLEBURY ST. • ELKHART, IN 46516-4740 • USA • PH: 1.800.234.0227 TECH SERVICES PH: 1.888.446.4226 • FAX: 1.888.234.0557 • INTERNATIONAL OFFICE PH: +1.574.295.3327 • FAX: +1.574.295.3455
www.nibco.com
24
Revised 3/11/2010
DIMENSIONS—WEIGHTS Dimensions
Size A B C Weight In. mm. In. mm. In. mm. In. mm. Lbs. Kg. ¹⁄₂† 15 1.97 50 3.63 92 .50 13 .78 .36 ³⁄₄ 20 2.62 67 3.91 99 .75 19 1.21 .55 1 25 3.07 78 4.69 119 1.00 25 1.92 .88 1¹⁄₄ 32 3.36 85 5.22 133 1.25 32 2.69 1.22 1¹⁄₂ 40 3.70 94 6.25 159 1.50 38 3.91 1.78 2 50 4.28 109 7.06 179 2.00 51 6.21 2.83† No packing gland, packing only in this size.
Screw-inBonnet•Non-RisingStem•SolidWedgeNIBCO®PressSystem®BronzeGateValves
CONFORMSTOMSSSP-80
1. HandwheelNut 300SeriesStainlessSteel 2. IdentificationPlate Aluminum 3. Handwheel MalleableIronASTMA47 4. Stem SiliconBronzeASTMB371AlloyC69430 orASTMB99AlloyC65100 5. PackNut BrassASTMB16AlloyC36000 6. PackGland BrassASTMB16AlloyC36000 7. Packing AramidFiberswithGraphite 8. StuffingBox BronzeASTMB62AlloyC83600 9. Bonnet BronzeASTMB62AlloyC83600 10. BodyAssembly BronzeASTMB62AlloyC83600 11. Wedge BronzeASTMB62AlloyC83600 12. FemaleAdapter(2) BronzeASTMB61AlloyC92200 13. O-Ring(2) EPDM
MATERIALLIST PART SPECIFICATION
DezincificationResistant
200 PSI/13.8 Bar Non-Shock Cold Working Pressure250°F Maximum Operating Temperature
PF113PressxPressFemaleEnd
PF113PxP
NIBCO®PressSystem®gatevalvesaredesignedtomeetMSSSP-80withtheexceptionoftheendconnection.Maleandfemalepress-to-connectendsarenewtechnologynotyetcoveredinthecurrenteditionofthisspecification.
A H E A D O F T H E F L O W®www.nibco.com
NIBCO INC. WORLD HEADQUARTERS • 1516 MIDDLEBURY ST. • ELKHART, IN 46516-4740 • USA • PH: 1.800.234.0227 TECH SERVICES PH: 1.888.446.4226 • FAX: 1.888.234.0557 • INTERNATIONAL OFFICE PH: +1.574.295.3327 • FAX: +1.574.295.3455
www.nibco.com25
Revised 3/11/2010
NIBCO®PressSystem®BronzeGlobeValves
1. HandwheelNut 300SeriesStainlessSteel 2. IdentificationPlate Aluminum 3. Handwheel MalleableIronASTMA47 4. Stem SiliconBronzeASTMB371AlloyC69430 5. PackGland BrassASTMB16AlloyC36000 6. PackNut BrassASTMB16AlloyC36000 7. Packing AramidFiberswithGraphite 8. Bonnet BronzeASTMB62AlloyC83600 9. DiscHolderNut BronzeASTMB62AlloyC83600 10. DiscHolder BronzeASTMB62AlloyC83600 11. Disc PTFE 12. DiscWasher 304StainlessSteel 13. DiscNut BronzeASTMB98AlloyC65100 14. BodyAssembly BronzeASTMB62AlloyC83600 15. FemaleAdapter(2) BronzeASTMB61AlloyC92200 16. O-Ring(2) EPDM
MATERIALLIST PART SPECIFICATION
DezincificationResistantScrew-inBonnet•IntegralSeat•RenewableSeatandDisc
CONFORMSTOMSSSP-80
PF211-YPressxPressFemaleEnd
PF211-YPxP
DIMENSIONS—WEIGHTS Dimensions Size A B C Weight
In. mm. In. mm. In. mm. In. mm. Lbs. Kg. *¹⁄₂† 15 2.91 74 3.38 86 .50 13 1.07 .48 ³⁄₄ 20 3.99 101 4.88 124 .75 19 2.04 .93 1 25 4.88 124 5.69 145 1.00 25 3.13 1.42 1¹⁄₄ 32 5.23 133 6.13 156 1.25 32 4.00 1.82 1¹⁄₂ 40 6.01 153 7.38 187 1.50 38 6.44 2.93 2 50 7.41 188 7.94 202 2.00 51 10.16 4.62† No packing gland, packing only in this size.
* Stem and disc (or disc holder) are integral.
NIBCO®PressSystem®globevalvesaredesignedtomeetMSSSP-80withtheexceptionoftheendconnection.Maleandfemalepress-to-connectendsarenewtechnologynotyetcoveredinthecurrenteditionofthisspecification.
A H E A D O F T H E F L O W®www.nibco.com
NIBCO INC. WORLD HEADQUARTERS • 1516 MIDDLEBURY ST. • ELKHART, IN 46516-4740 • USA • PH: 1.800.234.0227 TECH SERVICES PH: 1.888.446.4226 • FAX: 1.888.234.0557 • INTERNATIONAL OFFICE PH: +1.574.295.3327 • FAX: +1.574.295.3455
www.nibco.com
26
Revised 3/11/2010
DIMENSIONS—WEIGHTS Dimensions
Size B H J Weight
In. mm. In. mm. In. mm. In. mm. Lbs. Kg.*¹⁄₂† 15 3.50 89 1.49 38 1.49 38 1.07 .48 ³⁄₄ 20 4.94 126 2.00 51 2.00 51 1.94 .88 1 25 5.75 146 2.48 63 2.48 63 3.12 1.42 1¹⁄₄ 32 6.13 156 2.59 66 2.59 66 4.21 1.92 1¹⁄₂ 40 7.25 179 2.98 76 2.98 76 5.44 2.47 2 50 8.13 206 3.64 93 3.64 93 9.98 4.54† No packing gland, packing only in this size.
* Stem and Disc or Disc Holder are integral.
NIBCO®PressSystem®BronzeAngleValves
CONFORMSTOMSSSP-80
1. HandwheelNut 300SeriesStainlessSteel 2. IdentificationPlate Aluminum 3. Handwheel MalleableIronASTMA47 4. Stem SiliconBronzeASTMB371AlloyC69430 5. PackGland BrassASTMB16AlloyC36000 6. PackNut BrassASTMB16AlloyC36000 7. Packing AramidFiberswithGraphite 8. Bonnet BronzeASTMB62AlloyC83600 9. DiscHolderNut BronzeASTMB62AlloyC83600 10. DiscHolder BronzeASTMB62AlloyC83600 11. Disc PTFE 12. DiscWasher 304StainlessSteel 13. DiscNut SiliconBronzeASTMB96AlloyC65100 14. Body BronzeASTMB62AlloyC83600 15. FemaleAdapter(2) BronzeASTMB61AlloyC92200 16. O-Ring(2) EPDM
MATERIALLIST PART SPECIFICATION
DezincificationResistantScrew-inBonnet•IntegralSeat•RenewableSeatandDisc
200 PSI/13.8 Bar Non-Shock Cold Working Pressure250°F Maximum Operating Temperature
PF311-YPxP
NIBCO®PressSystem®anglevalvesaredesignedtomeetMSSSP-80withtheexceptionoftheendconnection.Maleandfemalepress-to-connectendsarenewtechnologynotyetcoveredinthecurrenteditionofthisspecification.
PF311-YPressxPressFemaleEnd
A H E A D O F T H E F L O W®www.nibco.com
NIBCO INC. WORLD HEADQUARTERS • 1516 MIDDLEBURY ST. • ELKHART, IN 46516-4740 • USA • PH: 1.800.234.0227 TECH SERVICES PH: 1.888.446.4226 • FAX: 1.888.234.0557 • INTERNATIONAL OFFICE PH: +1.574.295.3327 • FAX: +1.574.295.3455
www.nibco.com27
Revised 3/11/2010
DIMENSIONS—WEIGHTS Dimensions Size A B Weight
In. mm. In. mm. In. mm. Lbs. Kg. ¹⁄₂ 15 2.72 69 1.54 39 .58 .26 ³⁄₄ 20 3.62 92 1.83 46 .96 .44 1 25 4.32 110 2.21 56 1.51 .69 1¹⁄₄ 32 4.92 125 2.69 68 2.29 1.04 1¹⁄₂ 40 5.58 142 2.94 75 3.30 1.50 2 50 6.72 171 3.61 92 5.45 2.48
NIBCO®PressSystem®BronzeCheckValves
1. Bonnet BronzeASTMB62AlloyC83600 2. Body BronzeASTMB62AlloyC83600 3. HingePin BronzeASTMB140AlloyC31400 4. DiscHanger BronzeASTMB62AlloyC83600or304SS 1/2"and3/4"sizesonly 5. HangerNut BrassASTMB16AlloyC36000 6. DiscHolder BronzeASTMB62AlloyC83600 7. SeatDisc PTFE 8. SeatDiscNut BrassASTMB16AlloyC36000 9. HingePinPlug BronzeASTMB140AlloyC32000(notshown) *10. SeatDiscWasher ASTMB98AlloyC65500orASTMB103 11. FemaleAdapter(2) BronzeASTMB61AlloyC92200 12. O-Ring(2) EPDM
*Sizes3/4"thru2"only.
MATERIALLIST PART SPECIFICATION
NIBCOcheckvalvesmaybeinstalledinbothhorizontalandverticallineswithupwardfloworinanyintermediateposition.Theywilloperatesatisfactorilyinadecliningplane(nomorethan15º).
HorizontalSwing•RegrindingType•Y-Pattern•RenewableSeatandDisc
200 PSI/13.8 Bar Non-Shock Cold Working Pressure250°F Maximum Operating Temperature
CONFORMSTOMSSSP-80
PF413-YPressxPressFemaleEnd
PF413-YPxP
DezincificationResistant
NIBCO®PressSystem®checkvalvesaredesignedtomeetMSSSP-80withtheexceptionoftheendconnection.Maleandfemalepress-to-connectendsarenewtechnologynotyetcoveredinthecurrenteditionofthisspecification.
WARNING—DonotuseforReciprocatingAirCompressorService
A H E A D O F T H E F L O W®www.nibco.com
NIBCO INC. WORLD HEADQUARTERS • 1516 MIDDLEBURY ST. • ELKHART, IN 46516-4740 • USA • PH: 1.800.234.0227 TECH SERVICES PH: 1.888.446.4226 • FAX: 1.888.234.0557 • INTERNATIONAL OFFICE PH: +1.574.295.3327 • FAX: +1.574.295.3455
www.nibco.com
28
Revised 3/11/2010
DezincificationResistant
NIBCO®PressSystem®BronzeIn-lineLiftCheckValvesIn-lineLiftType•ResilientDiscs•SpringActuated
250PSI/17.2BarNon-ShockColdWorkingPressure250°FMaximumOperatingTemperature
MATERIALLIST PART SPECIFICATION 1. Body BronzeASTMB584AlloyC84400
2. Stem StainlessSteelASTMA582
AlloyC30300 3. Spring 316StainlessSteel 4. DiscHolder StainlessSteelType301 5. Disc PTFE
6. SeatScrew StainlessSteelASTMA276
AlloyS43000 7. BodyEnd BronzeASTMB584AlloyC84400 8. Adapter(2) BronzeASTMB61AlloyC92200 9. O-Ring(2) EPDM
DIMENSIONS—WEIGHTS Dimensions Size A B C Weight
In. mm. In. mm. In. mm. In. mm Lbs.Kg.¹⁄₂ 15 2.41 61 1.38 35 .50 13 0.52 0.24³⁄₄ 20 3.05 77 1.63 41 .75 19 0.75 0.34 1 25 3.56 90 2.00 51 1.00 25 1.18 0.54 1¹⁄₄ 32 3.86 98 2.38 60 1.25 32 1.72 0.78 1¹⁄₂ 40 4.45 113 2.75 70 1.50 38 2.49 1.13 2 50 5.28 134 3.38 86 2.00 51 3.96 1.80
PF480-Y(PTFEDisc)PxP
PF480-YPressxPressFemaleEnd
NIBCO®PressSystem®checkvalvesmaybeinstalledinbothhorizontalandverticallineswithupwardfloworinanyintermediateposition.
WARNING-DoNotUseforreciprocatingaircompressorservice.
NOTE:0.5PSIpressurerequiredtoopenspring.
NOTE:Checkvalvesaredown-ratedfrom250PSICWPto200PSICWPtomatchthePressSystem.
A H E A D O F T H E F L O W®www.nibco.com
NIBCO INC. WORLD HEADQUARTERS • 1516 MIDDLEBURY ST. • ELKHART, IN 46516-4740 • USA • PH: 1.800.234.0227 TECH SERVICES PH: 1.888.446.4226 • FAX: 1.888.234.0557 • INTERNATIONAL OFFICE PH: +1.574.295.3327 • FAX: +1.574.295.3455
www.nibco.com29
Revised 3/11/2010
NIBCO®PressSystem®ButterflyValvesDuctileIronBody•ExtendedNeck•GeometricDriveMolded-inSeatLiner•LugStylewithPressxPressFemaleEndsSizes21/2"through4"
DIMENSIONS—WEIGHTS Size G Metal Rubber In. mm. A B C D E F Flat H I 21⁄265 2.90 4.69 1.25 5.88 3.27 .38 .370 1.812 1.938
3 80 3.15 5.12 1.25 6.12 3.40 .38 .370 1.812 1.938
4 100 4.09 6.12 1.25 6.88 4.00 .38 .403 2.062 2.188
PFD2000LugStyle
EPDMLinerandAluminum
BronzeDiscPressxPressFemaleEnd
NOTRECOMMENDEDFORSTEAMSERVICE
CONFORMSTOMSS-SP67•MSS-SP25•API-609
MATERIALLIST PART SPECIFICATION 1. Stem StainlessSteelASTMA582Type416 2. CollarBushing BrassASTMB124 3. StemSeal EPDMRubber 4. BodySeal EPDMRubber 5. Nameplate Aluminum 6. UpperBushing WrotCopperASTMB75AlloyC12200 7. Liner EPDMRubber 8. Disc Alum.Brz.ASTMB148Alloy954/955 9. LowerBushing WrotCopperASTMB75AlloyC12200 10. BodyLug DuctileIronASTMA536 11. FlangeBody(2) CarbonSteel 12. FlangeGasket(2) EPDM 13. FlangePressEnds(2) WrotCopperASTMB75AlloyC12200 14. O-Ring(2) EPDM 15. CapScrews CarbonSteel
Availablewithlockleverhandleorgearoperator.
Total Size J N O P R S Lug Weight In. mm. Square Dia. B.C. Dia. Dia. No.Length Lbs.Kg.
21⁄2 65 3.25 .562 3.25 .437 .500 3.13 24.00 10.88
3 80 3.25 .562 3.25 .437 .500 3.44 26.00 11.78
4 100 3.25 .625 3.25 .437 .562 4.00 38.00 17.23
Refer to page 47for bolt lengths
NIBCO®PressSystem®butterflyvalvesaredesignedtomeetMSSSP-67withtheexcep-tionoftheendconnection.Maleandfemalepress-to-connectendsarenewtechnologynotyetcoveredinthecurrenteditionofthisspecification.
200 PSI/13.8 Bar Non-Shock Cold Working Pressure250°F Maximum Operating Temperature
A H E A D O F T H E F L O W®www.nibco.com
NIBCO INC. WORLD HEADQUARTERS • 1516 MIDDLEBURY ST. • ELKHART, IN 46516-4740 • USA • PH: 1.800.234.0227 TECH SERVICES PH: 1.888.446.4226 • FAX: 1.888.234.0557 • INTERNATIONAL OFFICE PH: +1.574.295.3327 • FAX: +1.574.295.3455
www.nibco.com
30
Revised 3/11/2010
DezincificationResistant
NIBCO®PressSystem®BronzeBallValvesTwo-PieceBody•FullPort•BronzeTrim•Blowout-ProofStem
600 PSI/41.4 Bar Non-Shock Cold Working Pressure250°F Maximum Operating Temperature
CONFORMSTOMSSSP-110
MATERIALLIST PART SPECIFICATION 1. HandleNut ZincPlatedSteel 2. HandleAssembly ZincPlatedSteelwithPlastisolCover 3. PackGland BrassASTMB16AlloyC36000 4. Packing PTFE 5. Stem SiliconBronzeASTMB371AlloyC69430 6. ThrustWasher RPTFE 7. Ball BrassASTMB16AlloyC36000orASTMB124 AlloyC37700(Chrome/NicklePlated) 8. SeatRing(2) RPTFE 9. Body BronzeASTMB584AlloyC84400 10. BodyEndPiece BronzeASTMB584AlloyC84400 11. StubOut(2) Type“L”CopperTube
DIMENSIONS—WEIGHTS Dimensions Size A B C D Weight
In. mm. In. mm. In. mm. In. mm. In. mm. Lbs. Kg. ¹⁄₂ 15 6.56 167 1.88 48 7.25 184 .50 13 .73 .99 ³⁄₄ 20 7.25 184 2.25 57 8.25 210 .75 19 1.50 .68 1 25 7.75 197 2.38 60 8.63 219 1.00 25 2.05 .93 1¹⁄₄ 32 9.06 230 3.00 76 9.19 233 1.25 32 3.64 1.65 1¹⁄₂ 40 9.99 254 3.16 80 11.69 297 1.50 38 5.73 2.60 2 50 10.72 272 3.50 89 12.06 306 2.00 51 8.11 3.68
PS585-70PxP
NIBCO®PressSystem®ballvalvesaredesignedtomeetMSSSP-110withtheexceptionoftheendconnection.Ballvalvesaredown-ratedfrom600PSICWPto200PSICWPtomatchthePressSystem®.Maleandfemalepress-to-connectendsarenewtechnologynotyetcoveredinthecurrenteditionofthisspecification.
PS585-70PressxPress
MaleEnd
A H E A D O F T H E F L O W®www.nibco.com
NIBCO INC. WORLD HEADQUARTERS • 1516 MIDDLEBURY ST. • ELKHART, IN 46516-4740 • USA • PH: 1.800.234.0227 TECH SERVICES PH: 1.888.446.4226 • FAX: 1.888.234.0557 • INTERNATIONAL OFFICE PH: +1.574.295.3327 • FAX: +1.574.295.3455
www.nibco.com31
Revised 3/11/2010
NIBCO®PressSystem®BronzeBallValves
PS585-70-66PxP
DezincificationResistantTwo-PieceBody•FullPort•StainlessTrim•Blowout-ProofStem•VentedBall
600 PSI/41.4 Bar Non-Shock Cold Working Pressure250°F Maximum Operating TemperatureNominalsizes1/2"through1"areULcertifiedtoNSF/ANSI61
CONFORMSTOMSSSP-110
PS585-70-66PressxPress
MaleEnd
MATERIALLIST PART SPECIFICATION 1. HandleNut ZincPlatedSteel 2. HandleAssembly ZincPlatedSteelwithPlastisolCover 3. PackGland BrassASTMB16AlloyC36000 4. Packing PTFE 5. Stem ASTMA276AlloyS31600StainlessSteel 6. ThrustWasher RPTFE 7. Ball ASTMA276AlloyS31600StainlessSteel 8. SeatRing(2) RPTFE 9. Body BronzeASTMB584AlloyC84400 10. BodyEndPiece BronzeASTMB584AlloyC84400 11. StubOut(2) Type“L”CopperTube
DIMENSIONS—WEIGHTS Dimensions Size A B C D Weight
In. mm. In. mm. In. mm. In. mm. In. mm. Lbs. Kg. ¹⁄₂ 15 6.56 167 1.88 48 7.25 184 .50 13 .73 .33 ³⁄₄ 20 7.25 184 2.25 57 8.25 210 .75 19 1.50 .68 1 25 7.75 197 2.38 60 8.63 219 1.00 25 2.05 .93 1¹⁄₄ 32 9.06 230 3.00 76 9.19 233 1.25 32 3.86 1.75 1¹⁄₂ 40 9.99 254 3.16 80 11.69 297 1.50 38 5.79 2.63 2 50 10.72 272 3.50 89 12.06 306 2.00 51 8.84 4.00
NIBCO®PressSystem®ballvalvesaredesignedtomeetMSSSP-110withtheexceptionoftheendconnection.Ballvalvesaredown-ratedfrom600PSICWPto200PSICWPtomatchthePressSystem®.Maleandfemalepress-to-connectendsarenewtechnologynotyetcoveredinthecurrenteditionofthisspecification.
A H E A D O F T H E F L O W®www.nibco.com
NIBCO INC. WORLD HEADQUARTERS • 1516 MIDDLEBURY ST. • ELKHART, IN 46516-4740 • USA • PH: 1.800.234.0227 TECH SERVICES PH: 1.888.446.4226 • FAX: 1.888.234.0557 • INTERNATIONAL OFFICE PH: +1.574.295.3327 • FAX: +1.574.295.3455
www.nibco.com
32
Revised 3/11/2010
NIBCO®PressSystem®BronzeBallValvesTwo-PieceBody•FullPort•NIB-SEAL®Handle
600 PSI/41.4 Bar Non-Shock Cold Working Pressure250°F Maximum Operating Temperature
PS585-70-NSPressxPress
MaleEnd
PS585-70-NSPxP
1. Cap Plastic 2. Insulation Styrofoam 3. ExtensionHandle Plastic 4. Sleeve ClearPlastic 5. HandleNut ZincPlatedSteel 6. Screw ZincPlatedSteel 7. MemoryStopPlate ZincPlatedSteel 8. BasePlate ZincPlatedSteel 9. ThreadPackGland BrassASTMB16AlloyC36000 10. Packing PTFE 11. Stem SiliconBronzeASTMB371AlloyC69430 12. BodyEnd BronzeASTMB584AlloyC84400 13. ThrustWasher RPTFE 14. Ball BrassASTMB16AlloyC36000(ChromePlated) 15. SeatRing(2) ReinforcedPTFE 16. Body BronzeASTMB584AlloyC84000 17. StubOut(2) Type“L”CopperTube
MATERIALLIST PART SPECIFICATION
DezincificationResistant
CONFORMSTOMSSSP-110
DIMENSIONS—WEIGHTS Dimensions Size A C E F Weight
In. mm. In. mm. In. mm. In. mm. In. mm. Lbs. Kg. ¹⁄₂ 15 6.56 167 3.75 95 2.19 56 4.25 108 .97 .44 ³⁄₄ 20 7.25 184 4.00 101 2.19 56 4.25 108 1.74 .79 1 25 7.75 197 4.25 108 2.19 56 4.25 108 2.29 1.04 1¹⁄₄ 32 9.06 230 5.38 137 3.38 86 6.50 165 4.11 1.87 1¹⁄₂ 40 9.99 254 5.56 141 3.38 86 6.50 165 6.20 2.81 2 50 10.72 272 5.88 149 3.38 86 6.50 165 8.58 3.89
NIBCO®PressSystem®ballvalvesaredesignedtomeetMSSSP-110withtheexceptionoftheendconnection.Ballvalvesaredown-ratedfrom600PSICWPto200PSICWPtomatchthePressSystem®.Maleandfemalepress-to-connectendsarenewtechnologynotyetcoveredinthecurrenteditionofthisspecification.
A H E A D O F T H E F L O W®www.nibco.com
NIBCO INC. WORLD HEADQUARTERS • 1516 MIDDLEBURY ST. • ELKHART, IN 46516-4740 • USA • PH: 1.800.234.0227 TECH SERVICES PH: 1.888.446.4226 • FAX: 1.888.234.0557 • INTERNATIONAL OFFICE PH: +1.574.295.3327 • FAX: +1.574.295.3455
www.nibco.com33
Revised 3/11/2010
NIBCO®PressSystem®BronzeBallValvesTwo-PieceBody•FullPort•316SSBall&Stem•NIB-SEAL®Handle
600 PSI/41.4 Bar Non-Shock Cold Working Pressure250°F Maximum Operating TemperatureNominal sizes 1/2" through 1" are UL certified to NSF/ANSI 61
PS585-70-66-NSPressxPress
MaleEnd
PS585-70-66-NSPxP
1. Cap Plastic 2. Insulation Styrofoam 3. ExtensionHandle Plastic 4. Sleeve ClearPlastic 5. HandleNut ZincPlatedSteel 6. Screw ZincPlatedSteel 7. MemoryStopPlate ZincPlatedSteel 8. BasePlate ZincPlatedSteel 9. ThreadPackGland BrassASTMB16AlloyC36000 10. Packing PTFE 11. Stem ASTMA276AlloyS31600StainlessSteel 12. BodyEnd BronzeASTMB584AlloyC84400 13. ThrustWasher RPTFE 14. Ball ASTMA276AlloyS31600StainlessSteel 15. SeatRing(2) ReinforcedPTFE 16. Body BronzeASTMB584AlloyC84000 17. StubOut(2) Type“L”CopperTube
MATERIALLIST PART SPECIFICATION
DezincificationResistant
CONFORMSTOMSSSP-110
DIMENSIONS—WEIGHTS Dimensions Size A C E F Weight
In. mm. In. mm. In. mm. In. mm. In. mm. Lbs. Kg. ¹⁄₂ 15 6.56 167 3.75 95 2.19 56 4.25 108 .97 .44 ³⁄₄ 20 7.25 184 4.00 101 2.19 56 4.25 108 1.74 .79 1 25 7.75 197 4.25 108 2.19 56 4.25 108 2.29 1.04 1¹⁄₄ 32 9.06 230 5.38 137 3.38 86 6.50 165 4.33 1.97 1¹⁄₂ 40 9.99 254 5.56 141 3.38 86 6.50 165 6.26 2.84 2 50 10.72 272 5.88 149 3.38 86 6.50 165 9.31 4.22
NIBCO®PressSystem®ballvalvesaredesignedtomeetMSSSP-110withtheexceptionoftheendconnection.Ballvalvesaredown-ratedfrom600PSICWPto200PSICWPtomatchthePressSystem®.Maleandfemalepress-to-connectendsarenewtechnologynotyetcoveredinthecurrenteditionofthisspecification.
A H E A D O F T H E F L O W®www.nibco.com
NIBCO INC. WORLD HEADQUARTERS • 1516 MIDDLEBURY ST. • ELKHART, IN 46516-4740 • USA • PH: 1.800.234.0227 TECH SERVICES PH: 1.888.446.4226 • FAX: 1.888.234.0557 • INTERNATIONAL OFFICE PH: +1.574.295.3327 • FAX: +1.574.295.3455
www.nibco.com
34
Revised 3/11/2010
NIBCO®PressSystem®BronzeBallValvesTwo-PieceBody•FullPort•BronzeTrim•³⁄₄"HoseConnectionwithCapandChain•Blowout-ProofStem
600 PSI/41.4 Bar Non-Shock Cold Working Pressure250°F Maximum Operating Temperature
CONFORMSTOMSSSP-110
PS585-70-HCPressMalexHoseEnd
MATERIALLIST PART SPECIFICATION 1. HandleNut ZincPlatedSteel 2. Handle ZincPlatedSteel 3. PackGland BrassASTMB16AlloyC36000 4. Packing PTFE 5. ThrustWasher RPTFE 6. Stem SiliconBronzeASTMB371AlloyC69430 7. Ball BrassASTMB16AlloyC36000orASTMB124 AlloyC37700(Chrome/NicklePlated) 8. SeatRings ReinforcedPTFE 9. BodyAssembly BronzeASTMB584AlloyC84400 10. HoseBodyEnd BrassASTMB124AlloyC37700 11. Cap DieCastBrass 12. Gasket Rubber 13. Chain Brass 14. StubOut Type“L”CopperTube Cap is for hose end thread protection only. Not to be used for pressure containing purposes.
DIMENSIONS—WEIGHTS Dimensions Size A B C Weight
In. mm. In. mm. In. mm. In. mm. Lbs. Kg. ¹⁄₂ 15 4.90 124 1.88 48 7.19 183 .81 .37 ³⁄₄ 20 5.47 139 2.25 57 8.25 210 1.54 .70
PS585-70-HCPressxHose
NIBCO®PressSystem®ballvalvesaredesignedtomeetMSSSP-110withtheexceptionoftheendconnection.Ballvalvesaredown-ratedfrom600PSICWPto200PSICWPtomatchthePressSystem®.Maleandfemalepress-to-connectendsarenewtechnologynotyetcoveredinthecurrenteditionofthisspecification.
A H E A D O F T H E F L O W®www.nibco.com
NIBCO INC. WORLD HEADQUARTERS • 1516 MIDDLEBURY ST. • ELKHART, IN 46516-4740 • USA • PH: 1.800.234.0227 TECH SERVICES PH: 1.888.446.4226 • FAX: 1.888.234.0557 • INTERNATIONAL OFFICE PH: +1.574.295.3327 • FAX: +1.574.295.3455
www.nibco.com35
Revised 3/11/2010
DIMENSIONS—WEIGHTS Dimensions
Size A B C Weight In. mm. In. mm. In. mm. In. mm. Lbs. Kg.¹⁄₂† 15 5.75 146 4.81 122 .50 13 .86 .39 ³⁄₄ 20 6.38 162 5.81 148 .75 19 1.30 .59 1 25 6.82 173 7.09 180 1.00 25 2.10 .95 1¹⁄₄ 32 7.13 181 8.13 206 1.25 32 2.98 1.35 1¹⁄₂ 40 7.43 189 9.81 249 1.50 38 4.03 1.83 2 50 7.99 203 11.56 294 2.00 51 6.24 2.83† No packing gland, packing only in this size.
DezincificationResistantNIBCO®PressSystem®BronzeGateValves
Screw-inBonnet•RisingStem•SolidWedge
200 PSI/13.8 Bar Non-Shock Cold Working Pressure250°F Maximum Operating Temperature
CONFORMSTOMSSSP-80
PS111PressxPress
MaleEnd
PS111PxP
MATERIALLIST PART SPECIFICATION 1. HandwheelNut 300SeriesStainlessSteel 2. IdentificationPlate Aluminum 3. Handwheel MalleableIronASTMA47 4. Stem SiliconBronzeASTMB371AlloyC69430 orASTMB99AlloyC65100 5. PackNut BrassASTMB16AlloyC36000 6. PackGland BrassASTMB16AlloyC36000 7. Packing AramidFiberswithGraphite 8. Bonnet BronzeASTMB62AlloyC83600 9. BodyAssembly BronzeASTMB62AlloyC83600 10. Wedge BronzeASTMB62AlloyC83600 11. StubOut(2) Type“L”CopperTube
NIBCO®PressSystem®gatevalvesaredesignedtomeetMSSSP-80withtheexceptionoftheendconnection.Maleandfemalepress-to-connectendsarenewtechnologynotyetcoveredinthecurrenteditionofthisspecification.
A H E A D O F T H E F L O W®www.nibco.com
NIBCO INC. WORLD HEADQUARTERS • 1516 MIDDLEBURY ST. • ELKHART, IN 46516-4740 • USA • PH: 1.800.234.0227 TECH SERVICES PH: 1.888.446.4226 • FAX: 1.888.234.0557 • INTERNATIONAL OFFICE PH: +1.574.295.3327 • FAX: +1.574.295.3455
www.nibco.com
36
Revised 3/11/2010
DIMENSIONS—WEIGHTS Dimensions
Size A B C Weight In. mm. In. mm. In. mm. In. mm. Lbs. Kg. ¹⁄₂† 15 5.75 146 3.63 92 .50 13 .80 .36 ³⁄₄ 20 6.38 162 3.91 99 .75 19 1.22 .55 1 25 6.82 173 4.69 119 1.00 25 1.93 .88 1¹⁄₄ 32 7.13 181 5.22 133 1.25 32 2.71 1.23 1¹⁄₂ 40 7.43 189 6.25 159 1.50 38 3.78 1.72 2 50 7.99 203 7.06 179 2.00 51 5.61 2.54† No packing gland, packing only in this size.
Screw-inBonnet•Non-RisingStem•SolidWedgeNIBCO®PressSystem®BronzeGateValves
CONFORMSTOMSSSP-80
1. HandwheelNut 300SeriesStainlessSteel 2. IdentificationPlate Aluminum 3. Handwheel MalleableIronASTMA47 4. Stem SiliconBronzeASTMB371AlloyC69430 orASTMB99AlloyC65100 5. PackNut BrassASTMB16AlloyC36000 6. PackGland BrassASTMB16AlloyC36000 7. Packing AramidFiberswithGraphite 8. StuffingBox BronzeASTMB62AlloyC83600 9. Bonnet BronzeASTMB62AlloyC83600 10. BodyAssembly BronzeASTMB62AlloyC83600 11. Wedge BronzeASTMB62AlloyC83600 12. StubOut(2) Type“L”CopperTube
MATERIALLIST PART SPECIFICATION
DezincificationResistant
200 PSI/13.8 Bar Non-Shock Cold Working Pressure250°F Maximum Operating Temperature
PS113PressxPress
MaleEnd
PS113PxP
NIBCO®PressSystem®gatevalvesaredesignedtomeetMSSSP-80withtheexceptionoftheendconnection.Maleandfemalepress-to-connectendsarenewtechnologynotyetcoveredinthecurrenteditionofthisspecification.
A H E A D O F T H E F L O W®www.nibco.com
NIBCO INC. WORLD HEADQUARTERS • 1516 MIDDLEBURY ST. • ELKHART, IN 46516-4740 • USA • PH: 1.800.234.0227 TECH SERVICES PH: 1.888.446.4226 • FAX: 1.888.234.0557 • INTERNATIONAL OFFICE PH: +1.574.295.3327 • FAX: +1.574.295.3455
www.nibco.com37
Revised 3/11/2010
NIBCO®PressSystem®BronzeGlobeValves
1. HandwheelNut 300SeriesStainlessSteel 2. IdentificationPlate Aluminum 3. Handwheel MalleableIronASTMA47 4. Stem SiliconBronzeASTMB371AlloyC69430 5. PackGland BrassASTMB16AlloyC36000 6. PackNut BrassASTMB16AlloyC36000 7. Packing AramidFiberswithGraphite 8. Bonnet BronzeASTMB62AlloyC83600 9. DiscHolderNut BronzeASTMB62AlloyC83600 10. DiscHolder BronzeASTMB62AlloyC83600 11. Disc PTFE 12. DiscWasher 304StainlessSteel 13. DiscNut BronzeASTMB98AlloyC65100 14. BodyAssembly BronzeASTMB62AlloyC83600 15. StubOut(2) Type“L”CopperTube
MATERIALLIST PART SPECIFICATION
DezincificationResistantScrew-inBonnet•IntegralSeat•RenewableSeatandDisc
200 PSI/13.8 Bar Non-Shock Cold Working Pressure250°F Maximum Operating Temperature
CONFORMSTOMSSSP-80
PS211-YPressxPress
MaleEnd
PS211-YPxP
DIMENSIONS—WEIGHTS Dimensions Size A B C Weight
In. mm. In. mm. In. mm. In. mm. Lbs. Kg. *¹⁄₂† 15 6.69 170 3.38 86 .50 13 1.08 .49 ³⁄₄ 20 7.75 197 4.88 124 .75 19 2.03 .92 1 25 8.63 219 5.69 145 1.00 25 3.20 1.45 1¹⁄₄ 32 9.00 229 6.13 156 1.25 32 4.01 1.82 1¹⁄₂ 40 9.74 247 7.38 187 1.50 38 6.31 2.86 2 50 11.12 282 7.94 202 2.00 51 9.92 4.50† No packing gland, packing only in this size.
* Stem and disc (or disc holder) are integral.
NIBCO®PressSystem®globevalvesaredesignedtomeetMSSSP-80withtheexceptionoftheendconnection.Maleandfemalepress-to-connectendsarenewtechnologynotyetcoveredinthecurrenteditionofthisspecification.
A H E A D O F T H E F L O W®www.nibco.com
NIBCO INC. WORLD HEADQUARTERS • 1516 MIDDLEBURY ST. • ELKHART, IN 46516-4740 • USA • PH: 1.800.234.0227 TECH SERVICES PH: 1.888.446.4226 • FAX: 1.888.234.0557 • INTERNATIONAL OFFICE PH: +1.574.295.3327 • FAX: +1.574.295.3455
www.nibco.com
38
Revised 3/11/2010
DIMENSIONS—WEIGHTS Dimensions
Size B H J Weight
In. mm. In. mm. In. mm. In. mm. Lbs. Kg.*¹⁄₂† 15 3.50 89 3.38 86 3.38 86 1.08 .49 ³⁄₄ 20 4.94 126 3.88 99 3.88 99 1.94 .88 1 25 5.75 146 4.35 110 4.35 110 3.12 1.42 1¹⁄₄ 32 6.13 156 4.47 114 4.47 114 4.23 1.92 1¹⁄₂ 40 7.25 179 4.84 123 4.84 123 5.31 2.41 2 50 8.13 206 5.50 140 5.50 140 9.74 4.42† No packing gland, packing only in this size.
* Stem and Disc or Disc Holder are integral.
NIBCO®PressSystem®BronzeAngleValves
CONFORMSTOMSSSP-80
1. HandwheelNut 300SeriesStainlessSteel 2. IdentificationPlate Aluminum 3. Handwheel MalleableIronASTMA47 4. Stem SiliconBronzeASTMB371AlloyC69430 5. PackGland BrassASTMB16AlloyC36000 6. PackNut BrassASTMB16AlloyC36000 7. Packing AramidFiberswithGraphite 8. Bonnet BronzeASTMB62AlloyC83600 9. DiscHolderNut BronzeASTMB62AlloyC83600 10. DiscHolder BronzeASTMB62AlloyC83600 11. Disc PTFE 12. DiscWasher 304StainlessSteel 13. DiscNut SiliconBronzeASTMB96AlloyC65100 14. Body BronzeASTMB62AlloyC83600 15. StubOut(2) Type“L”CopperTube
MATERIALLIST PART SPECIFICATION
DezincificationResistantScrew-inBonnet•IntegralSeat•RenewableSeatandDisc
200 PSI/13.8 Bar Non-Shock Cold Working Pressure250°F Maximum Operating Temperature
PS311-YPxP
NIBCO®PressSystem®anglevalvesaredesignedtomeetMSSSP-80withtheexceptionoftheendconnection.Maleandfemalepress-to-connectendsarenewtechnologynotyetcoveredinthecurrenteditionofthisspecification.
PS311-YPressxPress
MaleEnd
A H E A D O F T H E F L O W®www.nibco.com
NIBCO INC. WORLD HEADQUARTERS • 1516 MIDDLEBURY ST. • ELKHART, IN 46516-4740 • USA • PH: 1.800.234.0227 TECH SERVICES PH: 1.888.446.4226 • FAX: 1.888.234.0557 • INTERNATIONAL OFFICE PH: +1.574.295.3327 • FAX: +1.574.295.3455
www.nibco.com39
Revised 3/11/2010
DIMENSIONS—WEIGHTS Dimensions Size A B Weight
In. mm. In. mm. In. mm. Lbs. Kg. ¹⁄₂ 15 6.50 165 1.54 39 .68 .31 ³⁄₄ 20 7.38 187 1.83 46 1.11 .50 1 25 8.07 205 2.21 56 1.81 .82 1¹⁄₄ 32 8.69 221 2.69 68 2.68 1.22 1¹⁄₂ 40 9.31 236 2.94 75 3.61 1.64 2 50 10.43 265 3.61 92 5.88 2.67
NIBCO®PressSystem®BronzeCheckValves
1. Bonnet BronzeASTMB62AlloyC83600 2. Body BronzeASTMB62AlloyC83600 3. HingePin BronzeASTMB140AlloyC31400 4. DiscHanger BronzeASTMB62AlloyC83600or304SS 1/2"and3/4"only 5. HangerNut BrassASTMB16AlloyC36000 6. DiscHolder BronzeASTMB62AlloyC83600 7. SeatDisc PTFE 8. SeatDiscNut BrassASTMB16AlloyC36000 9. HingePinPlug BronzeASTMB140AlloyC32000(notshown) *10. SeatDiscWasher ASTMB98AlloyC65500orASTMB103 11. StubOut(2) Type“L”CopperTube
*Sizes3/4"thru2"only.
MATERIALLIST PART SPECIFICATION
NIBCOcheckvalvesmaybeinstalledinbothhorizontalandverticallineswithupwardfloworinanyintermediateposition.Theywilloperatesatisfactorilyinadecliningplane(nomorethan15º).
HorizontalSwing•RegrindingType•Y-Pattern•RenewableSeatandDisc
200 PSI/13.8 Bar Non-Shock Cold Working Pressure250°F Maximum Operating Temperature
CONFORMSTOMSSSP-80
PS413-YPressxPress
MaleEnd
PS413-YPxP
DezincificationResistant
NIBCO®PressSystem®checkvalvesaredesignedtomeetMSSSP-80withtheexceptionoftheendconnection.Maleandfemalepress-to-connectendsarenewtechnologynotyetcoveredinthecurrenteditionofthisspecification.
WARNING—DonotuseforReciprocatingAirCompressorService
A H E A D O F T H E F L O W®www.nibco.com
NIBCO INC. WORLD HEADQUARTERS • 1516 MIDDLEBURY ST. • ELKHART, IN 46516-4740 • USA • PH: 1.800.234.0227 TECH SERVICES PH: 1.888.446.4226 • FAX: 1.888.234.0557 • INTERNATIONAL OFFICE PH: +1.574.295.3327 • FAX: +1.574.295.3455
www.nibco.com
40
Revised 3/11/2010
MATERIALLIST PART SPECIFICATION 1. Body BronzeASTMB584AlloyC84400 2. Stem StainlessSteelASTMA582AlloyC30300 3. Spring 316StainlessSteel 4. DiscHolder StainlessSteelType301 5. Disc PTFE 6. SeatScrew StainlessSteelASTMA276AlloyS43000 7. BodyEnd BronzeASTMB584AlloyC84400 8. StubOut(2) Type“L”CopperTube
NIBCO®PressSystem®BronzeRingCheck®Valve
NIBCOcheckvalvesmaybeinstalledinbothhorizontalandverticallineswithupwardfloworinanyintermediateposition.
WARNING–DoNotUseforreciprocatingaircompressorservice.
NOTE:0.5PSIpressurerequiredtoopenspring.
In-lineLiftType•ResilientDiscs•SpringActuated
250 PSI/17.2 Bar Non-Shock Cold Working Pressure250°F Maximum Operating Temperature
PS480-YPressxPress
MaleEnd
DIMENSIONS—WEIGHTS Dimensions Size A B C Weight
In. mm. In. mm. In. mm. In. mm. Lbs. Kg.
¹⁄₂ 15 6.19 157 1.38 35 .50 13 .53 .24 ³⁄₄ 20 6.81 173 1.63 41 .75 19 .75 .34 1 25 7.32 186 2.00 51 1.00 25 1.18 .54 1¹⁄₄ 32 7.63 194 2.38 60 1.25 32 1.74 .79 1¹⁄₂ 40 8.18 208 2.75 70 1.50 38 2.36 1.07 2 50 8.99 228 3.38 86 2.00 51 3.71 1.68
DezincificationResistant
NOTE:Checkvalvesaredown-ratedfrom250PSICWPto200PSICWPtomatchthePressSystem. PS480-Y(PTFEDisc)PxP
A H E A D O F T H E F L O W®www.nibco.com
NIBCO INC. WORLD HEADQUARTERS • 1516 MIDDLEBURY ST. • ELKHART, IN 46516-4740 • USA • PH: 1.800.234.0227 TECH SERVICES PH: 1.888.446.4226 • FAX: 1.888.234.0557 • INTERNATIONAL OFFICE PH: +1.574.295.3327 • FAX: +1.574.295.3455
www.nibco.com41
Revised 3/11/2010
DIMENSIONS—WEIGHTS Dimensions Size A B C D Weight In. mm. In. mm. In. mm. In. mm. In mm. Lb. Kg.
¹⁄₂ 15 2.83 72 1.39 35 .52 13 5.49 139 1.06 .48 ³⁄₄ 20 2.88 73 1.64 42 .75 19 5.72 145 1.44 .65 1 25 3.50 89 2.09 53 1.00 25 6.53 166 2.45 1.11 1¹⁄₄ 32 3.74 95 2.42 61 1.25 32 7.66 195 3.43 1.56 1¹⁄₂ 40 4.23 107 2.86 73 1.50 38 8.81 224 4.86 2.20 2 50 4.75 121 3.52 89 2.00 51 9.87 251 7.50 3.40
MATERIALLIST PART SPECIFICATION 1. TailPiece(2) CopperC12200 2. UnionNut(2) BronzeASTMB584AlloyC84400 3. Stem 303StainlessSteel 4. Body BronzeASTMB584AlloyC84400 5. Spring 316StainlessSteel 6. DiscHolder 301StainlessSteel 7. Disc PTFE 8. SeatScrew 430StainlessSteel 9. End BronzeASTMB584AlloyC84400
NIBCO®PressSystem®BronzeRingCheck®ValveIn-lineLiftType•ResilientDiscs•SpringActuated•DoubleUnionEnd
250 PSI/17.2 Bar Non-Shock Cold Working Pressure250°F Maximum Operating Temperature
PCM480-Y(PTFEDisc)PxP
DezincificationResistant
PCM480-YPressxPress
MaleEnd
NIBCO480checkvalvesmaybeinstalledinbothhorizontalandverticallineswithupwardfloworinanyintermediateposition.
WARNING–DoNotUseforreciprocatingaircompressorservice.
NOTE:0.5PSIpressurerequiredtoopenspring.
NOTE:Checkvalvesaredown-ratedfrom250PSICWPto200PSICWPtomatchthePressSystem.
A H E A D O F T H E F L O W®www.nibco.com
NIBCO INC. WORLD HEADQUARTERS • 1516 MIDDLEBURY ST. • ELKHART, IN 46516-4740 • USA • PH: 1.800.234.0227 TECH SERVICES PH: 1.888.446.4226 • FAX: 1.888.234.0557 • INTERNATIONAL OFFICE PH: +1.574.295.3327 • FAX: +1.574.295.3455
www.nibco.com
42
Revised 3/11/2010
DezincificationResistant
NIBCO®PressSystem®BronzeBallValves Two-PieceBody•FullPort•StainlessBall•Blowout-ProofStem•DoubleUnionEnd
600 PSI/41.4 Bar Non-Shock Cold Working Pressure250°F Maximum Operating Temperature
CONFORMSTOMSSSP-110
PCM585-60PressxPress
MaleEnd
MATERIALLIST PART SPECIFICATION 1. HandleNut ZincPlatedSteel 2. Handle ZincPlatedSteelwithPlastisolCover 3. StemSealO-Ring(2) FKM(Fluoroelastomer) 4. ThrustWasher RPTFE 5. Stem SiliconBronzeASTMB371AlloyC69430 6. Body BronzeASTMB584AlloyC84000 7. SeatRing ReinforcedPTFE 8. Ball ASTMA276Alloy316StainlessSteel 9. BodyEndPiece BronzeASTMB584AlloyC84000 10. UnionNut(2) BronzeASTMB584AlloyC84000 11. TailPiece(2) CopperC12200
DIMENSIONS—WEIGHTS Dimensions Size A B C D E Weight
In. mm. In. mm. In. mm. In. mm. In. mm. In. mm. Lbs. Kg. ¹⁄₂ 15 2.67 68 3.90 99 1.85 47 .50 13 5.32 135 1.22 .55 ³⁄₄ 20 3.22 82 4.66 118 2.22 56 .75 19 6.06 154 2.09 .95 1 25 3.99 101 4.66 118 2.41 61 1.00 25 7.03 179 3.45 1.56 1¹⁄₄ 32 4.78 121 6.69 170 3.03 77 1.25 32 8.70 221 5.52 2.50 1¹⁄₂ 40 5.00 127 6.69 170 3.26 83 1.50 38 9.58 243 7.61 3.45 2 50 5.41 137 6.69 170 3.50 89 2.00 51 10.54 268 11.34 5.14
PCM585-60PxP
NIBCO®PressSystem®ballvalvesaredesignedtomeetMSSSP-110withtheexceptionoftheendconnection.Ballvalvesaredown-ratedfrom600PSICWPto200PSICWPtomatchthePressSystem®.Maleandfemalepress-to-connectendsarenewtechnologynotyetcoveredinthecurrenteditionofthisspecification.
A H E A D O F T H E F L O W®www.nibco.com
NIBCO INC. WORLD HEADQUARTERS • 1516 MIDDLEBURY ST. • ELKHART, IN 46516-4740 • USA • PH: 1.800.234.0227 TECH SERVICES PH: 1.888.446.4226 • FAX: 1.888.234.0557 • INTERNATIONAL OFFICE PH: +1.574.295.3327 • FAX: +1.574.295.3455
www.nibco.com43
Revised 3/11/2010
MATERIALLISTPART SPECIFICATION
1. Body BronzeASTMB584AlloyC84400 2. Cap BronzeASTMB62AlloyC83600 3. Gasket PTFE 4. Screen ASTME201620Mesh-304StainlessSteelor ASTME674Perforated-304StainlessSteel
5. Plug BrassASTMB16AlloyC36000or BronzeASTMB584AlloyC84400 6.FemaleAdapter(2) BronzeASTMB61AlloyC92200 7. O-Ring(2) EPDM
Class125BronzeY-StrainersScrew-inCap•TappedCapw/Blow-offPlugorSolidCap•20MeshSSScreenorSSPerforatedScreen
200PSI/13.8BarNon-ShockColdWorkingPressure250°FMaximumOperatingTemperature
PF221/222-APressxPressFemaleEnd
DIMENSIONS—WEIGHTS—QUANTITIES Dimensions
Size A C D Weight
In. mm. In. mm. In. mm. Threads Lbs. Kg. ¹⁄₂ 15 2.96 75 1.79 45 1/4 NPT 0.66 0.30 ³⁄₄ 20 3.94 100 2.14 54 3/8 NPT 1.21 0.55 1 25 4.66 118 2.79 71 3/8 NPT 1.88 0.86 1¹⁄₄ 32 5.47 139 3.23 82 3/4 NPT 3.10 1.41 1¹⁄₂ 40 6.05 154 3.61 92 3/4 NPT 4.64 2.10 2 50 7.40 188 4.99 127 1 NPT 7.48 3.39
PF221/222-APxP
CONFORMSTOMSSSP-110
PF221/222-BPxP
PF221/222-BPressxPressFemaleEnd
ENDCONNECTION SCREEN CAP
PF- Female Press 221 - 20 Mesh (STD.) A - Tapped Cap w/Plug (STD.)
PF - Female Press 222 - Perforated B - Solid Cap
A H E A D O F T H E F L O W®www.nibco.com
NIBCO INC. WORLD HEADQUARTERS • 1516 MIDDLEBURY ST. • ELKHART, IN 46516-4740 • USA • PH: 1.800.234.0227 TECH SERVICES PH: 1.888.446.4226 • FAX: 1.888.234.0557 • INTERNATIONAL OFFICE PH: +1.574.295.3327 • FAX: +1.574.295.3455
www.nibco.com
44
Revised 3/11/2010
Awidevarietyofhandlesareavailabletofulfillsafetyandoperationrequirementsinvariousprocessingandmanufacturingindustries.Theleverhandlewithplasticcoverisstandard.Otherhandleoptionsareshown.Stainlesssteelleverhandlesareavailable,asanoption,alsowithplasticcovers.Ifanoptionalhandleisdesired,pleaseindicatewhichonewhenordering.Manyoftheseoptionsarefieldassemblyonly.
CSStandardLeverHandle NIB-SEAL®HandleCSExtendedLeverHandle
withMemoryStop
CSLockingLeverHandle VerticalChainLeverCSRoundHandle
SSStandardLeverHandle HorizontalChainLeverCSExtendedRoundHandle
SSLockingLeverHandle MemoryStopKitCSWingHandle
CSExtendedLeverHandle
NIBCO®PressSystem®BallValveHandleOptions
A H E A D O F T H E F L O W®www.nibco.com
NIBCO INC. WORLD HEADQUARTERS • 1516 MIDDLEBURY ST. • ELKHART, IN 46516-4740 • USA • PH: 1.800.234.0227 TECH SERVICES PH: 1.888.446.4226 • FAX: 1.888.234.0557 • INTERNATIONAL OFFICE PH: +1.574.295.3327 • FAX: +1.574.295.3455
www.nibco.com45
Revised 3/11/2010
NIBCO®PressSystem®BronzeBallValvesNIB-SEAL®TechnicalData
NIBCObronzeballvalvesinstalledwithNIB-SEAL®insulatedhandlesaretheonlyapproachthatkeepsyourinsulatedpipingsystemcompletelyintact.
The revolutionary NIB-SEAL bronze ball valve stops condensate cold. Its unique thermal barrier design keeps moisture from infiltrating your insulated system while preventing thermal energy loss through exposed metal handles.
Designed for new installations or retrofitting existing systems, NIB-SEAL bronze ball valves offer a wide range of advantages for typical commercial HVAC systems as well as industrial applications where insulated piping is desirable.
• Protective sleeve provides a stationary surface to affix the insulation, allowing operation and maintenance of the valve without destroying the integrity of the insulated system.
• High-strength cylindrical handle design features easy access to standard adjustable memory stop for system balancing. The valve packing is also readily accessible for routine maintenance.• Cap and insulating plug provide a vapor seal to prevent exchange of air to maximize the efficiency of your insulated
piping system.• Position indicators allow at-a-glance determination of whether valve is in open or closed position.• Pre-formed hole allows for convenient tagging.
Temperature range: 15° F to 250° F
Cap keeps moisture-laden air out to reduce chance of condensate forma-tion
Insulation plug provides vapor seal, keeping air from infiltrating the insu-lated system
Handle nut
Indicator gives at-a-glance valve posi-tion
Memory stop plate and screws for sys-tem balancing
Pre-formed hole for identification tag
Extension handle of durable non-thermal conductive material prevents formation of condensation
Protective sleeve allows operation of valve handle and maintenance of valve packing while maintaining integrity of piping insulation
NIBCO® Press System® bronze ball valve is an integral part of the NIB-SEAL valve system
US PATENT 5,236,006
A H E A D O F T H E F L O W®www.nibco.com
NIBCO INC. WORLD HEADQUARTERS • 1516 MIDDLEBURY ST. • ELKHART, IN 46516-4740 • USA • PH: 1.800.234.0227 TECH SERVICES PH: 1.888.446.4226 • FAX: 1.888.234.0557 • INTERNATIONAL OFFICE PH: +1.574.295.3327 • FAX: +1.574.295.3455
www.nibco.com
46
Revised 3/11/2010
ButterflyValveOptionsandAccessoriesLever-LockOperator(Standard)PFD2000
Position-LockOperator(Optional)PFD2000
1. Handle PolymerCoatedIron 2. Lever-Lock ZincPlatedSteel 3. ThrottlePlate ZincPlatedSteel
MATERIALLIST PART SPECIFICATION
DIMENSIONSANDTORQUEOUTPUT PFD Dimensions TorqueRatedOutputinInch-Pounds Lever ThrottlePlateThrottlePlate/ Size (STD) (STD) InfinitePos.Kit A B C D At60poundsPull At100poundsPull
2¹⁄₂”-3” T115107PP T115138PP T114841FG 10¹⁄₂ 1 4⁵⁄₈ 6³⁄₁₆ 540In-Lbs. 900In-Lbs. 4 T115108PP T115138PP T114842FG 10¹⁄₂ 1 4⁵⁄₈ 6³⁄₁₆ 540In-Lbs. 900In-Lbs.
Thelever-lockhandleandthrottlingplateprovidethrottlingnotch-esevery10oforexcellentmanualcontrolinbalancingupto90oorshutoffservice.Thevalvemaybepadlockedinanyoneofthepositionsincludingopenedorclosedbyvirtueofalockingholelocatedinthehandleandlever.
Theposition-lockcanbeusedtosetthevalveinanypositionorasamemorystopsothevalvemaybereopenedtothepreviousposition.Thevalvemaybepadlockedinfullopenorfullclosedposition.
Ordering:Soldasafieldretrofitablekitonly.
CastIronGearOperatorTheNIBCObutterflyvalvecanbeprovidedwithheavy-dutyoperatorandindicator.Recommendedforvalves8"andlarger,fortrouble-freeoperationinallmoistureandweatherconditions(notsubmersible).Operatorisaself-lockingwormgeartype.Equippedwithadjustablestopsatopenandshutpositions.Ordering:Specifybyadding(-5)toFig.No.,i.e.,PFD2000-5.BabbitSprocketmaybeaddedtohandwheel.Seebelowforsizinginformation.Availableoptions:MemoryStopGearOperatorKit,2"SquareOperatingNut,FlagIndicatorandHandwheelforGO.
GearOperatoroptionsandaccessories(21/2"through4"2000seriesonly)2"SquareOperatingNut MemoryStop FlagIndicator
21/2"-4"Consultfactoryfor:SquareOperatingNut,MemoryStopandFlagIndicator
Notes-1.Stemadapterbushingmustbeorderedseperatelywhenneededforsmallersizevalves.2.Allotheraccessoriesmustbeorderedseparately.(Sprocketrim,squareoperatornut,flagindicator&memorystopkit.) 3.Gearoperatorcomeswithhandwheel.
GEAROPERATORDETAILFORSIZES21/2"TO4"(PFD2000ONLY)GEAROPERATORACCESSORIES&REPLACEMENTPARTS GEAR GEAR DIMENSIONS(INCHES) STEMSPROCKETSQUARE FLAG MEMORY REPLACEMENTOPERATOR RATIO OP ADAPTER RIMOPERATING
INDICATOR
STOPKIT
HANDWHEELNUMBER WEIGHT A B C D E F BUSHINGMODEL NUTT117118PP 24:1 10 7.64 1.775.04 4.24 5.912.79T046653PP#1½T117792FC T116682PPT026196PPT117122PPT117118PP 24:1 10 7.64 1.775.04 4.24 5.912.79T046654PP#1½T117792FC T116682PPT026196PPT117122PP
PFDVALVE
2½-34
A H E A D O F T H E F L O W®www.nibco.com
NIBCO INC. WORLD HEADQUARTERS • 1516 MIDDLEBURY ST. • ELKHART, IN 46516-4740 • USA • PH: 1.800.234.0227 TECH SERVICES PH: 1.888.446.4226 • FAX: 1.888.234.0557 • INTERNATIONAL OFFICE PH: +1.574.295.3327 • FAX: +1.574.295.3455
www.nibco.com47
Revised 3/11/2010
ButterflyValveTechnicalInformationValveInstallationProcedureAlwayspositiontheconnectingpipeflangesaccuratelyintheline,allowingsufficientspacebetweentheflangesforthevalve.Makesurethepipeflangefacesarecleanofanyforeignmaterialsuchasscale,metalshavingsorweldingslag.Valvesshouldbeinstalledwiththediscintheclosedpositiontopreventdamagetosealingsurfaces. 1. Carefullyinsertthevalvesbetweenthepipeflanges.Donotapplyanylubricantstotheseatfacesasthismaydamagethem. 2. Lineup,centerandsecurethevalvebetweenflangesusingdesiredboltsorstudsaslistedinTable4. Donottightenboltsatthistime. 3. Carefullyopenthevalvetoassurefreeunobstructeddiscmovement.Discinterferencemayresultwhenvalvesareinstalledinpipelineshaving smallerthannormalinsidediameters,suchasheavywallpipe,plastic-linedpipe,as-castflangesorreducingflanges.Interferencecanalsooccur whenconnectingdirectlytoaswingcheckorsilentcheck.Suitablecorrectivemeasuresmustbetakentoremovetheseobstructions,suchastaper boringthepipeorinstallingaspacerorspoolpiece. 4. Afterproperoperationisverified,tightentheboltsusingacross-overpattern(Fig.1)totheminimum recommendedbolttorqueslistedinTable3. 5. Pressurizepipingtovalveandinspectforleakage.Ifleakageisobserved,tightenboltsusing cross-overpattern,increasingtorqueuntilleakstops. DONOTEXCEEDMAXIMUMTORQUESLISTEDINTABLE3. 6. Recommendedtorquesaremadewithoutwarranty.Installermustverifyproperstrengthbolts forapplication.Boltsshallbecleanandun-lubricated.
4
2
1
3
8
6
5
7
Bolt TighteningCross Over Pattern
Fig.1
SuggestedBolting Method
Flange Bolt Minimum Bolt Maximum Bolt Size Size Torque (ft.•lbs.) Torque (ft.•lbs.) 21/2"-4" 5/8" 20 70
Table3Recommended Bolt Tightening Torques
Caution1. Class 250 cast iron and Class 300 steel flanges can not be used on these valves.2. Rubber faced or mechanical flanges are not recommended.3. This valve is not recommended for steam service.4. Valves should not be assembled to the flanges and then welded into the piping system.5. Do not install EPDM liner in compressed air lines.
21/2" 1.81
0.69 — — — — 1.50 8/45/8-11UNC — 0.88 — — — 1.75 8/4
3" 1.81
0.75 — — — — 1.50 8/45/8-11UNC — 0.94 — — — 1.75 8/4
4" 2.06 0.94 0.94 — — — 1.75 16/8 5/8-11UNC
VA
LVE
SIZ
E10
00/2
000/
3000
SE
RIE
S O
NLY
TO
TAL
VA
LVE
BO
DY
WID
TH
AN
SI B
16.1
CLA
SS
125
CA
ST
IRO
NFL
AN
GE
TH
ICK
NE
SS
AN
SI B
16.5
CLA
SS
150
ST
EE
LFL
AN
GE
TH
ICK
NE
SS
AN
SI B
16.4
7 (S
ER
IES
A)
CLA
SS
150
ST
EE
LM
SS
SP
-44
FLA
NG
E T
HIC
KN
ES
S
AN
SI B
16.4
7 (S
ER
IES
B)
CLA
SS
150
ST
EE
LW
ELD
NE
CK
FLA
NG
E T
HIC
KN
ES
S
AN
SI B
16.4
7 (S
ER
IES
B)
CLA
SS
150
ST
EE
LB
LIN
DS
TY
LEFL
AN
GE
TH
ICK
NE
SS
RE
CO
MM
EN
DE
DC
AP
SC
RE
W L
EN
GT
H(L
UG
GE
D V
ALV
ES
)(C
)
TO
TAL
QU
AN
TIT
YC
AP
SC
RE
WS
/BO
LTS
(TO
MO
UN
T 2
FLA
NG
ES
)
CA
P S
CR
EW
SIZ
ETable4Recommended Bolt Lengths
ResilientLinerMaterials
EPDM–EPDMisaterpolymerelastomermadefromethylene-propylenedienemonomer.EPDMhasgoodabrasionandtearresistanceandoffersexcellentchemicalresistancetoavarietyofacidsandalkalines.Itissusceptibletoattackbyoilsandisnotrecommendedforapplicationsinvolvingpetroleumoils,strongacidsorstrongalkalines.EPDMshouldnotbeusedoncompressedairlines.Ithasexceptionallygoodweatheragingandozoneresistance.Itisfairlygoodinketonesandalcohols.
Proprietarycompoundformulasareusedforeachoftheelastomerstoprovidetherightcombinationofseatcompression,abrasionresistanceandchemicalresistancetomatchyourapplication.Elastomericseatmaterialsarenotsuitableforsteamservice.
A H E A D O F T H E F L O W®www.nibco.com
NIBCO INC. WORLD HEADQUARTERS • 1516 MIDDLEBURY ST. • ELKHART, IN 46516-4740 • USA • PH: 1.800.234.0227 TECH SERVICES PH: 1.888.446.4226 • FAX: 1.888.234.0557 • INTERNATIONAL OFFICE PH: +1.574.295.3327 • FAX: +1.574.295.3455
www.nibco.com
48
Revised 6/4/2010
Tools, Jaws & Chains
A H E A D O F T H E F L O W®www.nibco.com
NIBCO INC. WORLD HEADQUARTERS • 1516 MIDDLEBURY ST. • ELKHART, IN 46516-4740 • USA • PH: 1.800.234.0227 TECH SERVICES PH: 1.888.446.4226 • FAX: 1.888.234.0557 • INTERNATIONAL OFFICE PH: +1.574.295.3327 • FAX: +1.574.295.3455
www.nibco.com49
Revised 6/4/2010
NIBCO®PressSystem®ToolsPC-2801/2"through4"
MATERIALLISTMODEL NO. DESCRIPTION LBS.
PC-280 PressingToolwith2-18V,3.0AhLithium-ion batteries,110Vbatterycharger&case 25.40 PC-10S 1/2"StandardPressingJaw(forPC-100orPC-280) 4.14PC-11S 3/4"StandardPressingJaw(forPC-100orPC-280) 4.18PC-12S 1"StandardPressingJaw(forPC-100orPC-280) 4.52PC-13S 11/4"StandardPressingJaw(forPC-100orPC-280) 4.30PC-14S 11/2"StandardPressingJaw(forPC-100orPC-280) 9.61PC-15S 2"StandardPressingJaw(forPC-100orPC-280) 9.26 PC-16S 1/2"-11/4"(4jaws)StandardPressJawKit w/Case(forPC-100orPC-280) 25.25PC-17S 11/2"-2"(2jaws)StandardPressJawKit w/Case(forPC-100orPC-280) 23.76 PC-2 21/2"PressingChainw/Case(forPC-100orPC-280) 18.58PC-3 3"PressingChainw/Case(forPC-100orPC-280) 19.40PC-4 4"PressingChainw/Case(forPC-100orPC-280) 23.81 PC-5 PC-5PressingChainAdapterJaw (note:mustbeusedwith21/2",3"&4"chains) 7.01 PC-7L 18V,3.0AhLithium-ionBattery(forPC-280orPC-20M) 1.30PC-8L 110VBatteryCharger(forPC-4MLorPC-7L) 2.20PC-9L ACAdapter(forPC-280orPC-20M) 1.70
PC-280C PlasticReplacementCaseforPC-280Tool 7.50PC-2C MetalReplacementCaseforPC-2orPC-3Chain 8.10PC-4C MetalReplacementCaseforPC-4Chain 8.10PC-16SC MetalReplacementCaseforPC-16S(1/2"-11/4"Jaws) 8.10PC-17SC MetalReplacementCaseforPC-17S(11/2"-2"Jaws) 4.40
PC-51 1/2"-2"DeburringTool 0.92
PC-10SthruPC-15SStandardPressingJaw
PC-2thruPC-4PressingChain
PC-5PressingChainAdapter
Jaw
PC-7L18V,3.0Ah
Lithium-ionBattery
PC-8L110VBatteryCharger
PC-9LACAdapter
PC-280PressingTool
PC-511/2"-2"DeburringTool
A H E A D O F T H E F L O W®www.nibco.com
NIBCO INC. WORLD HEADQUARTERS • 1516 MIDDLEBURY ST. • ELKHART, IN 46516-4740 • USA • PH: 1.800.234.0227 TECH SERVICES PH: 1.888.446.4226 • FAX: 1.888.234.0557 • INTERNATIONAL OFFICE PH: +1.574.295.3327 • FAX: +1.574.295.3455
www.nibco.com
50
Revised 6/4/2010
NIBCO®PressSystem®ToolsPC-20M1/2"through1"
MATERIALLISTMODEL NO. DESCRIPTION LBS.
PC-20M MiniPressingTool,2-18V,1.3AhLithium-ionbatteries, 110Vcharger&case(NOjaws) 11.00PC-200M MiniPressingTool,3Jaws,2-18V,1.3AhLithium-ion batteries,110Vcharger&case 18.00 PC-1M 1/2"Jaw(forMiniPressingTool-PC-10MorPC-20M) 2.09PC-2M 3/4"Jaw(forMiniPressingTool-PC-10MorPC-20M) 2.05PC-3M 1"Jaw(forMiniPressingTool-PC-10MorPC-20M) 2.07 PC-4ML 18V,1.3AhLithium-ionBattery(forPC-20M) 0.80PC-7L 18V,3.0AhLithium-ionBattery(forPC-280orPC-20M) 1.30PC-8L 110VBatteryCharger(forPC-4MLandPC-7L) 2.20PC-9L ACAdapter(forPC-280orPC-20M) 1.70
PC-20MC PlasticReplacementCaseforPC-10M&PC-20M) 4.00PC-50 1/2"-1"DeburringTool 0.42
PC-7L18V,3.0Ah
Lithium-ionBattery
PC-1M,2M,3MMiniPressingJaw
PC-20MMiniPressingTool
PC-200MMiniPressingToolwith1/2",3/4"and1"Jaws
PC-501/2"-1"DeburringTool
PC-4ML18V,1.3Ah
Lithium-ionBattery
PC-8L110VBatteryCharger
PC-9LACAdapter
A H E A D O F T H E F L O W®www.nibco.com
NIBCO INC. WORLD HEADQUARTERS • 1516 MIDDLEBURY ST. • ELKHART, IN 46516-4740 • USA • PH: 1.800.234.0227 TECH SERVICES PH: 1.888.446.4226 • FAX: 1.888.234.0557 • INTERNATIONAL OFFICE PH: +1.574.295.3327 • FAX: +1.574.295.3455
www.nibco.com51
Revised 6/4/2010
PC-280&PC-20MFEATURES
TOOLS
Lightweight PC-20M Mini: 3.7 lbs. (without jaw) PC-280: 9.4 lbs. (without jaw)
Easytohandle/simpledesign Jaws rotate 350° No calibration necessary No complicated switches or controls Mini: Ergonomic compact design is easy to use in tight spaces
Interruptiblecrimpcycle Safety feature prevents injuries
Can begin crimp, stop to align and level fitting / tube, and complete crimp
Battery Can be changed during crimp cycle Lithium-ion has short charging cycle and larger capacity • PC-4ML: 15 minute recharge time • PC-7L: 22 minute recharge time
ACPowerAdapter Converts the tool to electric power Allows continuous use
Servicelight Illuminates at 10,000 cycles
Tool will not stop operating when light illuminates • RED indicates battery charge status, service intervals, tool functions & faults • WHITE illuminates the work area
HydraulicPressureCheck(HPC) An audible warning signal sounds if adequate work-
ing pressure is not achieved
PRESSINGCHAINS(21/2"to4"ONLY)
Uniformcrimp Maintains proper pipe alignment
Easytoinstallandremove Once secured to fitting, chain cannot fall off prior to crimp Chain easily removed post crimp
CrimpIdentification Easy to identify crimp has been made from a distance
MATERIALLISTMODEL NO. DESCRIPTION LBS.
PC-6 12V,NiMHBattery-2.6AhforPC-100 1.51PC-7 12V,NiMHBattery-3.0AhforPC-100 1.57PC-8 120VStandardBatteryChargerforPC-6orPC-7 1.10PC-9 ACAdapterforPC-100PressTool 1.32 PC-4M 1.3AhNiCd9.6VBatteryforMiniPressingTool 0.85PC-5M 120VChargerforMiniPressingTool 1.13 PC-100C MetalCaseforPC-100Tool 14.30
NIBCO®PressSystem®ToolsPC-100andPC-10MAccessories
PC-712V,3.0Ah
NiMHBattery
PC-4M9.6V,1.3Ah
NiMHBattery
PC-8120VBatteryCharger
PC-9ACAdapter
A H E A D O F T H E F L O W®www.nibco.com
NIBCO INC. WORLD HEADQUARTERS • 1516 MIDDLEBURY ST. • ELKHART, IN 46516-4740 • USA • PH: 1.800.234.0227 TECH SERVICES PH: 1.888.446.4226 • FAX: 1.888.234.0557 • INTERNATIONAL OFFICE PH: +1.574.295.3327 • FAX: +1.574.295.3455
www.nibco.com
52
Revised 3/11/2010
NIBCO®PressSystem®ApprovedToolandJawCompatibilityMatrixPressing tool, jaw and chain sets are an integral part of ensuring a reliable, permanent connection between NIBCO® Press System® fittings, valves and copper piping. Only use pressing tools, jaws and chain sets that have been tested and approved for use with NIBCO Press System fittings and valves.
ForthelatestlistingofapprovedPressingtool,jawandchaincombinations,visitnibco.com.NIBCOrecommendsminortoolserviceperformedonceperyearandmajorserviceeverythreeyears.Fortechnicalorserviceassistance,contactNIBCOTechnicalServices1-888-446-4226.
RIDGID®isaregisteredtrademarkofRIDGIDInc.ProPress®isaregisteredtrademarkofViegaNA.ROMAX®isaregisteredtrademarkofROTHENBERGERUSALLCVIRAX®isaregisteredtrademarkofTheStanleyWorks.
CAUTION:NIBCO Press Fittings and Valves (2½”, 3”, 4” ends) to be installed ONLY with NIBCO Pressing Tools & Chains.
1/2"
-1"N
IBCO
Press
Syste
mMini
Pres
sing
Jaws
(PC-1M
,PC-
2M,P
C-3M
)
1/2"
-1"R
IDGI
D®Pr
oPres
s®Co
mpact
Press
ingJa
ws
1/2"
-1-1/
4"RID
GID®
ProP
ress®
C1Co
mpact
Kit
(C1A
ctuato
r&Pr
essR
ings)
Rothe
nberg
erCo
mpact
Press
ingJa
ws
Stan
ley® VI
RAX®
Pres
sIns
erts
1/2"
-2"N
IBCO
Press
Syste
mStan
dard
Press
ing
Jaws(
PC-10
S,PC
-11S,
PC-12
S,PC
-13S,
PC-14
S,PC
-15S)
1/2"
-2"R
IDGI
D®Pr
oPres
s®
Stan
dard
Press
ingJa
ws
1/2"
-1-1/
4"RID
GID®
ProP
ress®
V1Ki
t
(V1A
ctuato
r&Pr
essR
ings)
1/2"
-2"R
othen
berge
rStan
dard
Press
ingJa
ws
1/2"
2"RE
MSS
tanda
rd
Press
ingJa
wsSt
anley
® VIRA
X®Pr
essin
gJaw
s
21/2
"-4"
NIBC
OPre
ssing
Chain
s
(PC-2,
PC-3,
PC-4)
A H E A D O F T H E F L O W®www.nibco.com
Revised 6/3/2010
1/2”
- 1”
NIB
CO P
ress
Syst
em M
ini
Pres
sing
Jaw
s (P
C-1M
, PC-
2M, P
C-3M
)
1/2”
- 1”
RID
GID®
Pro
Pres
s® C
ompa
ct
Pres
sing
Jaw
s
1/2”
- 1-
1/4”
RID
GID®
Pro
Pres
s® C
1 Co
mpa
ct K
it (C
1 Ac
tuat
or &
Pre
ss R
ings
)
Roth
enbe
rger
Com
pact
Pre
ssin
g Ja
ws
Stan
ley®
VIR
AX®
Pre
ss In
serts
1/2”
- 2”
NIB
CO P
ress
Syst
em S
tand
ard
Pres
sing
Jaw
s (P
C-10
S, P
C-11
S, P
C-12
S, P
C-13
S,PC
-14S
, PC-
15S)
1/2”
- 2”
RID
GID®
Pro
Pres
s® S
tand
ard
Pres
sing
Jaw
s
1/2”
- 1-
1/4”
RID
GID®
Pro
Pres
s® V
1 Ki
t (V
1 Ac
tuat
or &
Pre
ss R
ings
)
1/2”
- 2”
Rot
henb
erge
r Sta
ndar
d
Pr
essi
ng J
aws
1/2”
2”
REM
S St
anda
rd P
ress
ing
Jaw
s
Stan
ley®
VIR
AX®
Pre
ssin
g Ja
ws
2 1/
2” -
4” N
IBCO
Pre
ssin
g Ch
ains
(PC-
2, P
C-3,
PC-
4)
PRES
SIN
GT
OO
LS
SIZE 1/2”-1” 1/2”-2” 21/2”-4”
NIBCO PC-280 — — — — — YES YES YES YES YES YES YES
NIBCO PC-100 — — — — — YES YES YES YES YES YES YES
RIDGID® 320-E — — — — — YES YES YES — — — —
RIDGID® RP 330-B — — — — — YES YES YES — — — —
RIDGID® CT400 — — — — — YES YES YES — — — —
RIDGID® RP 330-C — — — — — YES YES YES — — — —
Rothenberger ROMAX® Pressliner
— — — — — — — — YES — — —
Rothenberger ROMAX® AC ECO
— — — — — — — — YES — — —
REMS Akku-Press — — — — — — — — — YES — —
REMS Power-Press — — — — — — — — — YES — —
Stanley® VIRAX® P20+ — — — — — — — — — — YES —
NIBCO PC-20M Mini YES — — YES — — — — — — — —
NIBCO PC-10M Mini YES — — YES — — — — — — — —
RIDGID® 100-B Compact — YES YES — — — — — — — — —
RIDGID® RP 210-B Compact — YES YES — — — — — — — — —
Rothenberger Compact YES — — YES — — — — — — — —
Stanley® VIRAX® M20+ Compact
— — — — YES — — — — — — —
The following table details compatibility of approved pressing tools, chains and jaws with the NIBCO Press System fittings and valves:
A H E A D O F T H E F L O W®www.nibco.com
NIBCO INC. WORLD HEADQUARTERS • 1516 MIDDLEBURY ST. • ELKHART, IN 46516-4740 • USA • PH: 1.800.234.0227 TECH SERVICES PH: 1.888.446.4226 • FAX: 1.888.234.0557 • INTERNATIONAL OFFICE PH: +1.574.295.3327 • FAX: +1.574.295.3455
www.nibco.com53
Revised 3/11/2010 A H E A D O F T H E F L O W®www.nibco.com
Revised 3/10/2010
Engineering Data
A H E A D O F T H E F L O W®www.nibco.com
NIBCO INC. WORLD HEADQUARTERS • 1516 MIDDLEBURY ST. • ELKHART, IN 46516-4740 • USA • PH: 1.800.234.0227 TECH SERVICES PH: 1.888.446.4226 • FAX: 1.888.234.0557 • INTERNATIONAL OFFICE PH: +1.574.295.3327 • FAX: +1.574.295.3455
www.nibco.com
54
Revised 3/11/2010 A H E A D O F T H E F L O W®www.nibco.com
Revised 3/10/2010
NIBCO®PressSystem®—EngineeringDataCopperandCopperAlloyFittingsStandardsO-Ringsealjointsarenotnewtothepipingindustry,butjoiningtechniqueslikethe NIBCO® Press System® are providing new alternatives for copper pipingassembly. Althoughtherearenonationally recognizedstandardsfor thesefit-tings,NIBCOhasreliedonitscenturyofexperienceincopperandbrasspipingproducts to design the best performing and most dependable line of fittingspossible.
ApplicationsTheNIBCO®PressSystem®fittingsaredesignedtojoinwithASTMB88seam-lesscopperwater tube in residentialandcommercialpotable,hot, chilledandprocesswaterapplicationsforplumbingandHVACsystems.CopperandcopperalloymaterialsandEPDMelastomericsealshavealonghistoryofcompatibilitywith common chemicals used in these systems. A chemical resistance chartshouldalwaysbereferencedwhenotherfluidsaretobeintroduced.
NOTE: FLUIDS CONTAINING HYDROCARBONS ARE NOT COMPATIBLEWITHTHEEPDMSEAL.
Pressure/TemperatureLimitations-20°Fto250°Fupto200PSIG,non-shockworkingpressure.
Materials:• WrotCopper
◆ ASTMB75AlloyC12200
• CastCopper&BrassRodAlloy
◆ BSEN1982:1999ModifiedAlloyCC491K ◆ EuropeanRedBrasscomparabletoASTMB62
• ElastomericSeals ◆ EPDMO-RingscompliantwithBSEN681-1
PerformanceIn theabsenceofanationally recognized standard, the followingperformancetestsweredevelopedandconducted.Thefittingdimensions,materialsofcon-structionandperformancetestswerewitnessedandverifiedby internationallyrecognized Underwriters Laboratories, Inc. A letter of verification is availableuponrequest:
1. DimensionalVerification a. Insidediameterofpresscupandwaterway b. Outsidediameterofpresscupandwaterway c. Wallthickness d. ThreadedendsconformancetoASMEB1.20.1 2. HydrostaticMinimumBurstStrengthPressure a. Fitting samples hydrostatically tested to a minimum of 600 PSI (threetimestheratedinternalworkingpressure)at73°F. 3. UnrestrainedHydrostaticPressureTestat68°F(20°C)and200°F(93°C) a. Fitting assemblies were filled with water and pressurized to 600 PSIGat68°or200°Ffor48hours. 4. StaticTorque a. Fittings were filled with water, had a minimum torque applied and released. Each fitting was then pressurized to 400 PSIG for 48hours. 5. BendingTest a. A sample fitting was installed between two equal lengths of hard- drawn copper tubing supported six (6) feet apart. A concentrated load was applied to the center of the fitting. The assembly was subjectedto400PSIGwaterpressureforone(1)hour. 6. VacuumPressureTest a. Fittings were subjected to a vacuum pressure of 24.5 inches of mercuryforone(1)hour. 7. CyclicPressureTest a. Fittings were subjected to a hydraulic shock pressure of 400 PSIG for10,000cycles. 8. VibrationTest a. Fitting assemblies were subjected to a hydrostatic cyclic vibration test at 350 PSIG for 1,000,000 cycles. After cycling, the assem- blieswerepressurizedto400PSIGfor30minutes. 9. ThermocyclingTest a. Fitting and tube assemblies were filled with air and pressur- ized to 100 PSIG. The water temperature was cycled from 68°F to 200°F for 2,500 cycles. Each temperature was held for 2 minutes andchangedwithintwo(2)minutes. 10. DynamicTorqueat68°F(20°C)and200°F(93°C) a. Fittings were assembled between two lengths of hard-drawn copper tubing. Withone tube fixed, theother tube twisted±5° for 10,000 cycles at 68°F (20°C) or 200°F (93°C). Each assembly was then subjected to400PSIGwaterpressureat 68°F (20°C) or 200°F (93°C)for48hours.TestswereperformedwithK,LandMharddrawn-coppertubing.Aminimumofonefittingofeachconfigurationofeachsizewastested.
FlowareaconsistentwithASMEB16.22
NIBCOPressFittingsmeetallperformance
requirementsofASMEB16.22and
B16.18
NOTE:FreezingWeatherPrecaution—Subsequenttotestingapipingsystem,valveshouldbeinanopenpositiontoallowcompletedrainage.
A H E A D O F T H E F L O W®www.nibco.com
NIBCO INC. WORLD HEADQUARTERS • 1516 MIDDLEBURY ST. • ELKHART, IN 46516-4740 • USA • PH: 1.800.234.0227 TECH SERVICES PH: 1.888.446.4226 • FAX: 1.888.234.0557 • INTERNATIONAL OFFICE PH: +1.574.295.3327 • FAX: +1.574.295.3455
www.nibco.com55
Revised 3/11/2010
FITTINGS2"andSmaller:FittingsshallcomplywithNSF61,CSA,UPCandbeapprovedbythelocaljuris-
diction.TheNIBCO®PressSystem®maybeusedatthecontractor’soptionforthefollowingbuildingservicespiping-20°Fto+250°Fupto200PSI:
• HotandColdDomesticWater • PotableWater • CondenserandChilledWaterService • HotWaterHeatingService Wrotcopperpressfittingsshallbemadefromcommerciallypurecoppermill
productsperASTMB75AlloyC12200.Castcopperalloypressfittingsshallbemadefrommaterialswithaminimumof78%copperandamaximumof15%zinc.ThepressfittingsconnectionsshallbecompatiblewithseamlessK,LorMcoppertubemadetoASTMB88.Fittingsshallhaveamaximumnon-shockworkingpressureof200PSIbetweenthetemperaturesof-20°Fand+250°F.ElastomericsealsshallbemadeofEPDMmaterial,andthefit-tingsshallbemanufacturedwithaninboardbeaddesign.Allfittingsshallbeinstalledinaccordancewiththemanufacturer’sinstallationinstructionsandaccordingtolocalplumbingandmechanicalcodes.Thepress-to-connectjointshallbemadewithpressingtoolsandjawsetsrecommendedandauthorizedbyNIBCO.
VALVES
2"andSmallerBallValves:(On/Off,IsolationorThrottling) Ball valves with male or female press-to-connect ends shall be rated at
200 PSI CWP to +250°F maximum. Valves shall be manufactured in ac-cordance with MSS SP-110 and constructed of dezincification resis-tant cast bronze bodies. No brass containing more than 15% zinc shallbe approved. Valve shall have reinforced PTFE seats, blow-out proofstem, full-port ball, chrome/nickel plated ball or 316 SS ball for ag-gressive water conditions. Where piping is to be insulated, ball valvesshall be equipped with 2” extended handles of non-thermal conductivematerial.Handletohaveextendedsleeveincorporatinganinsulationplugtoprovide a vapor barrier and allow valve operation without disturbing theinsulation,andamemorystop,whichcanbesetafterinstallation.
AcceptableValves:(non-insulatedlines): NIBCOPF585-70orPS585-70(Chrome/nickelplatedball) NIBCOPF585-70-66,PS585-70-66orPCM585-60(316SSball) AcceptableValves:(insulatedlines): NIBCOPF585-70-NSorPS585-70-NS(Chrome/nickelplatedball) NIBCOPF585-70-66-NSorPCM585-60-NS(316SSball) (NotetoSpecifier:Includepressgatevalvesinaddition/inlieuofpressballvalvesfor
ON/OFFandisolationservicesifrequestedorrequired.)
2"andSmallerGateValves:(On/OffandIsolation) Gate valves with male or female press-to-connect ends shall be rated to
200PSICWPat+250°Fmaximum.Valvesshallbemanufactured inaccor-dancewithMSSSP-80.Valvebody,bonnetandwedgetobemanufacturedofdezincificationresistantcastbronze(ASTMB62).Stemsshallbeofsiliconbronze(ASTMB371)orlowzincalloy(ASTMB99).Non-asbestospackingandmalleableorductileironhand-wheelshallbestandard.
AcceptableValves: NIBCOPF111orPS111-RisingStemGateValve NIBCOPF113orPS113-Non-RisingStemGateValve
2"andSmallerGlobeandAngleValves:(ThrottlingService) Globeandanglevalveswithmaleorfemalepress-to-connectendsshallbe
ratedto200PSICWPat+250°Fmaximum.ValvesshallbemanufacturedinaccordancewithMSSSP-80.Valvebody,bonnetandwedgetobemanufac-turedofdezincificationresistantcastbronze(ASTMB62).Stemsshallbeofsiliconbronze (ASTMB371)or lowzincalloy (ASTMB99).Non-asbestospackingandmalleableorductileironhand-wheelshallbestandard.
AcceptableValves: NIBCOPF211-YorPS211-Y-GlobeValve NIBCOPF311-YorPS311-Y-AngleValve
2"andSmallerCheckValves:(BackFlowPrevention) Checkvalves (Ypattern, swing typeor in-line)withmaleor femalepress-
to-connectendsshallberatedat200PSICWPto+250°Fmaximum.ValvesshallbemanufacturedinaccordancewithMSSSP-80.Bodyandcaptobemanufacturedofdezincificationresistantcastbronze(ASTMB62orASTMB584AlloyC84400).ValvestohavePTFEseatdisc.
AcceptableValves: NIBCOPF413-YorPS413-Y-YPattern,SwingTypeCheckValve NIBCOPF480-YorPS480-Y-In-linespringloadedSilentCheckValve
DrainValves Atalllowpointsinwaterpipingtobedrainedorvented,provide1/2”or3/4"
ball valves with male or female press-to-connect ends by hose-end drainvalves.Valvesshallberatedby200PSICWPto+250°Fmaximum.Valvesshall bemanufactured inaccordancewithMSSSP-110.Valves tobe con-structedofdezincificationresistantcastbronzebodies.Valveshallhaverein-forcedPTFEseats,blow-outproofstem,andbefullport.Allvalvesshallbeprovidedwith3/4”hoseconnectionwithcapandchain.
AcceptableValves: NIBCOPS585-70-HCorPF585-70-HC
21/2"thru4"ButterflyValves:(On/Off,IsolationorThrottling) Butterflyvalveswithfemalepress-to-connectendsshallberatedat200PSI
CWPto+250°Fmaximum.ValvesshallbemanufacturedinaccordancewithMSSSP-67andconstructedofaductile-ironbody,forbubble-tightshutoff,extended-neck for insulation, disc and lining suitable for potable water,valvesshallbesuitableforbi-directionaldeadendserviceatfullratedpres-sure,one-pieceType416stainless-steelstem,copperbushing,fastenersandpinsshallnotbeusedtoattachstemtodisc,nopinsorfastenersinwater-way,aluminum-bronzedisc,andmolded-inEPDMseat(liner).
AcceptableValves: NIBCOPFD2000Series
NIBCO®PressSystem®—SampleSpecification
A H E A D O F T H E F L O W®www.nibco.com
NIBCO INC. WORLD HEADQUARTERS • 1516 MIDDLEBURY ST. • ELKHART, IN 46516-4740 • USA • PH: 1.800.234.0227 TECH SERVICES PH: 1.888.446.4226 • FAX: 1.888.234.0557 • INTERNATIONAL OFFICE PH: +1.574.295.3327 • FAX: +1.574.295.3455
www.nibco.com
56
Revised 3/11/2010
Installation Instructions
A H E A D O F T H E F L O W®www.nibco.com
NIBCO INC. WORLD HEADQUARTERS • 1516 MIDDLEBURY ST. • ELKHART, IN 46516-4740 • USA • PH: 1.800.234.0227 TECH SERVICES PH: 1.888.446.4226 • FAX: 1.888.234.0557 • INTERNATIONAL OFFICE PH: +1.574.295.3327 • FAX: +1.574.295.3455
www.nibco.com57
Revised 3/11/2010
NIBCO®PressSystem®
TheNIBCO®PressSystem®,whenusedwithtestedandauthorizedpressingtools and jaws, is designed to mechanically crimp fittings and valves ontocopper tubing to createawatertight, permanent seal. When the switchonthe pressing tool is depressed, an internal motor powers a hydraulic pumpwhich forces fluid into thecylinderof the tool, forcing the ram forwardandapplying thousands of pounds of crimping force onto the specially designedfittingsandvalves.
SystemComponentsFittingsandValvesNIBCO®PressSystem®copperorbronzefittingsandvalves
TubingASTMB88seamlessHardDrawnCopperWaterTube:TypesK,LandM.
PressingTools,ChainsandJawsThe pressing tool, chain and jaw are important parts of ensuring a reliable,permanent connection between NIBCO® Press System® fittings and valvesandthecopperwatertube.
CAUTION—UseonlypressingtoolsandjawsetsthathavebeentestedandauthorizedforusewithNIBCO®PressSystem®fittingsandvalves(1).Useofunauthorizedpressing toolsand/or jawsmay result inan improperseal thatcouldcauseextensivepropertydamage.
PressingToolSafety• OnlyuseauthorizedpressingtoolsandjawswithNIBCO®PressSystem®
fittingsandvalves.Otherusesormodificationofthejawsforotherapplica-tionsmaydamagethepresstool,damagethejawsand/orcausepersonalinjury.
• Keepfingersandhandsawayfromjawsduringpressingcycle.Yourfingersor hands can be crushed, fractured or amputated if they become caughtbetweenthejawtipsorbetweenthejawandanyotherobject.
• Alwayswearsafetyglasseswhileusingpressingtoolsandjaws.
• Never attempt to repair a damaged jaw set. A jaw that has beenwelded, ground, drilled or modified in any manner can shatter duringcrimpingresulting inserious injury. Discard theentiredamaged jawset.Replacewithanewjawset.
NOTE:Consultmanufacturer'spressingtoolandjawsetoperatorsmanualtodeterminereplaceablejawsetcomponents.
WARNING:Pleasereadtheseinstallationinstructionsandthemanufac-turer'spressingtoolandjawoperatorsmanual(s)carefullypriortoinstalla-tionoftheNIBCO®PressSystem®.Failuretounderstandandfollowthecontentsof thismanualmay result inextensivepropertydamage,severepersonalinjuryordeath.
PleasecontactNIBCOTechnicalServicesat888.446.4226 ifyouhave instal-lationquestions.
NIBCO®PressSystem®—InstallationInstructions
(1)Seeapprovedtoolandjawcompatibilitymatrixonpage51.
A H E A D O F T H E F L O W®www.nibco.com
NIBCO INC. WORLD HEADQUARTERS • 1516 MIDDLEBURY ST. • ELKHART, IN 46516-4740 • USA • PH: 1.800.234.0227 TECH SERVICES PH: 1.888.446.4226 • FAX: 1.888.234.0557 • INTERNATIONAL OFFICE PH: +1.574.295.3327 • FAX: +1.574.295.3455
www.nibco.com
58
Revised 3/11/2010
Installation Instructions for 1/2" - 2"PressFittingsandValvesWARNING: To prevent serious injury, inspect the pressing tool, batterycharger(ifapplicable)andjawsetsaccordingtotheprocedureoutlinedinthepressingtoolinstructionmanualpriortobeginninginstallation.
Failure to clean jaws can result in an improper connection that can lead toextensivepropertydamage.
WorkAreaSet-UpTopreventseriousinjury,properset-upofthepressingtoolandworkareaisrequired.Thefollowingprocedureshouldbefollowed:
1. Checkworkareafor:
•Adequatelighting
•Flammableliquids,vaporsordustthatmayignite
2. Followthetoolset-upproceduresspecifiedinthemanufacturer'spressingtoolinstructionmanual.
PreparingtheCopperTube1. Selectclean,undamagedcoppertubeandcuttodesiredlength.Cuttube
endsquareusingatubecutterorfine-toothedsaw(Figure 1).
Figure 1 — Cut tube to desired length using a tube cutter
2. Deburrthetubeinsideandoutsidediameterusingahalf-roundfileoradeburringtool.
3. Cleanthetubeendofalldirt,oilandgrease.(Emeryclothorsandpapertocleanthetubeorremoveoxidationis not required.)
InsertingtheTubeintotheFittingorValve1.CheckthefittingtomakesuretheEPDMsealisinplace,cleanandfreeof
oilandgrease(Figure 2).
Figure 2 — Check for EPDM Seal
WARNING:NeverlubricatetheEPDMsealintheNIBCO®PressSystem®fittingorvalvewithanythingotherthanwater.Oil-basedlubricant,dirtordebrismaydamagetheseal.Animpropersealcanleadtoextensivepropertydamage.
2. Insertthetubeintothefittingorvalveusingatwistingmotion.Makesurethatthetubeisfullyinsertedintothefittingstoporshoulder.
3. Mark the tube with a permanent marker to indicate the proper tubeinsertiondepth(Figure 3).
Figure 3 — Inserting the tube to proper depth
4. Refertotheminimuminsertiondepthtableforcorrectdepths
CAUTION: Tubing that is difficult to insert may have burrs or could beout-of-round. Burrsmustberemovedandtubingendshouldbeundamaged.Makesuretubeisinsertedtotheproperdepth.Failuretodosomayresultinanimproperseal.
AttachingPressingJaws1. Makesurethebatteryisremovedorthecordisunpluggedonthepressing
toolpriortoattachingorchangingthecrimpjaws.
2. Pushandtwisttoopenthejawsetmountingpin.(Figure 4).
Figure 4 — Pushing and twisting to open the jaw set mounting pin
3. Ifpresstoolcontainsajawset,slideitoutofthecrimpingtool.
NIBCO®PressSystem®—InstallationInstructions
TubeSizeInches Inches mm
1/2 11/16 183/4 7/8 221 7/8 22
11⁄4 1 2511⁄2 13⁄8 352 11⁄2 38
InsertionDepth(min.)
A H E A D O F T H E F L O W®www.nibco.com
NIBCO INC. WORLD HEADQUARTERS • 1516 MIDDLEBURY ST. • ELKHART, IN 46516-4740 • USA • PH: 1.800.234.0227 TECH SERVICES PH: 1.888.446.4226 • FAX: 1.888.234.0557 • INTERNATIONAL OFFICE PH: +1.574.295.3327 • FAX: +1.574.295.3455
www.nibco.com59
Revised 3/11/2010
4. Selectthejawsetthatcorrespondstothesizeofthejointtobecrimpedandinsertthejawsetintothepressingtool(Figure 5).
Figure 5 — Inserting the NIBCO® Press System® jaw
5. Pushthejawsetmountingpinuntilitclicksintoposition.
NOTE:Thetoolwillnotworkunlessthepinisfullyengaged.
CrimpingaNIBCO®PressSystem®FittingorValve
1. Makesurethetubingisinsertedtotheproperdepthinthefitting,andthattubeandfittingarealignedproperly.(Figure 6).
Figure 6 — Inserting the tube to proper depth
2. Squeezejawarmstoopenthejawset.
3. Placetheopenjawsaroundthefittingandensurethatthecontourofthejawisproperlyalignedwiththecontourofthefitting(Figure 7).
Figure 7 — Open the jaw set and place around the fitting
4. Makesurethetoolissquaretothetubinganddepresstheswitch(Figure 8).Oncethecrimpcyclebeginsandtherollerscontactthejawarms,thetoolwillcompletethecrimpcycle,aslongasthetriggerisdepressed.
Figure 8 — Jaw set should be square to tubing
5. Oncethecrimpiscomplete,pressthejawarmstoopenthejawandremovefromthefitting.
If the tool malfunctions, please refer to the tool instruction manual fortroubleshootingsuggestions.
CAUTION Avoidsharpedgesthatmayhaveformedonthefittingduringthecrimpingoperation.
InspectingtheCrimp
1. Inspectthecrimpedfittingtoensurepropercrimp.
NOTE:TheuseoftheNIBCO®PressSystem®jawwillproduceauniquewitnessmark“N”onthecrimpedfitting.
2. Inspect the crimped fitting checking the connection for the followingproblems:
• Misalignedtube
• Notfullyinsertedtube,doublecheckdepthmarks
• Incorrectjawalignmentwiththefittingcontour
Ifoneormoreoftheseproblemsarefound,anewsectionoftubingandanewfittingwillneedtobeprepared,installedandcrimped.
3. TesttheNIBCO®PressSystem®inaccordancewithnormalpracticeandtolocaljurisdictionpipingcode.
NIBCO®PressSystem®—InstallationInstructions
A H E A D O F T H E F L O W®www.nibco.com
NIBCO INC. WORLD HEADQUARTERS • 1516 MIDDLEBURY ST. • ELKHART, IN 46516-4740 • USA • PH: 1.800.234.0227 TECH SERVICES PH: 1.888.446.4226 • FAX: 1.888.234.0557 • INTERNATIONAL OFFICE PH: +1.574.295.3327 • FAX: +1.574.295.3455
www.nibco.com
60
Revised 3/11/2010
NIBCO®PressSystem®—InstallationInstructionsInstallation Instructions for 2 1/2" - 4"PressFittingsandValvesWARNING: To prevent serious injury, the pressing tool, battery charger(if applicable) and pressing chains should be inspected according to theprocedureoutlinedinthepressingtoolinstructionmanualpriortobeginninginstallation.
Failuretocleanpressingchainscanresultinanimproperconnectionthatcanleadtoextensivepropertydamage.
WorkAreaSet-UpTopreventseriousinjury,properset-upofthepressingtoolandworkareaisrequired.Thefollowingprocedureshouldbefollowed:
1. Checkworkareafor:
•Adequatelighting
•Flammableliquids,vaporsordustthatmayignite
2. Followthetoolset-upproceduresspecifiedinthepressingtoolinstruc-tionmanual.
PreparingtheCopperTube1. Selectclean,undamagedcoppertubeandcuttothedesiredlength.Cuttube
endsquareusingatubecutterorfine-toothedsaw(Figure 1).
2.Deburrthetubeinsidediameterusingahalf-roundfileordeburringtool.Removeanycoppershavingsorfilings(Figures 2 & 3).
Figure 1: Cut tube to desired length using s tube cutter
3.Deburrthetubeoutsidediameterusingahalf-roundfiletopreventdamagetotheEPDMseal(Figure 4).
Figure 4: Deburr outside diameter using a half-round file
4.Cleanthetubeendofallcontamination,oilsandshavings.Asmoothtransitionchamferisrecommendedtoeasetubeinsertionpasttheseal. (Emeryclothorsandpapertocleanthetubeorremoveoxidationis not required.)
InsertingtheTubeintotheFittingorValve1. Check thefitting tomakesure that theseal is inplaceand is freeofoilor
grease.OnlyoriginalNIBCOEPDMsealsaretobeusedwhenmakingapressconnectionwithNIBCO®PressSystem®fittingsandvalves.Ifitisnecessaryto lubricate the seals, use water only. DO NOT use any petroleum-basedlubricants(Figure 5).
Figure 5: Check for EPDM seal
WARNING:NeverlubricatetheEPDMsealinaNIBCO®PressSystem®fittingorvalvewithanythingother thanwater. Oil-based lubricants,dirtordebrismaydamagetheseal.Animpropersealcanleadtoextensivepropertydamage.
2. Marktheproperinsertiondepthonthetubewithapermanentmarkerpriortoinsertion,basedoninsertiondepthchart. Refertominimuminsertiondepthtableforcorrectdepths.
WARNING: If tube is not inserted to the proper depth, an inadequatesealmayresult.
3. Insert the tube into the fitting or valve using a twisting motion. Makesurethatthetubeisfulllyinsertedintothefittingorvalve.Iftubeisnotinsertedtotheproperdepth,aninadequatesealmayresult.
CAUTION: Tubing that is difficult to insert may have burrs or could beout-of-round.Burrsmustberemovedandtubingendshouldbeundamaged.Makesuretubeisinsertedtotheproperdepth.Failuretodosomayresultinanimproperseal.
NIBCO®PressSystem®InsertionDepthChart
Tube Size 21/2” 3” 4” Insertion Depth (min.) 11/2” 15/8” 21/8”Figure 2: Deburr inside diameter using a half-round file
Figure 3: Deburr inside diameter deburring tool
A H E A D O F T H E F L O W®www.nibco.com
NIBCO INC. WORLD HEADQUARTERS • 1516 MIDDLEBURY ST. • ELKHART, IN 46516-4740 • USA • PH: 1.800.234.0227 TECH SERVICES PH: 1.888.446.4226 • FAX: 1.888.234.0557 • INTERNATIONAL OFFICE PH: +1.574.295.3327 • FAX: +1.574.295.3455
www.nibco.com61
Revised 3/11/2010
CrimpingaNIBCO®PressSystem®FittingorValve
1. Makesurethatthebatteryisremovedorthatthecordisunpluggedonthepressingtoolpriortoattachingorchangingtheadapterjaw.
2. Select the correct sizepressing chain. Pull thepinon the chainwhichallowsthesegmentstoopen.Positionthechainontheraisedbeadandwrapthechainaround thefittingwith the "pipe side"designation facing the tube.When thechainisfullywrappedaroundthefitting,reinsertthepintosecurethechainontheassembledjoint.Visuallyinspectthemarkmadeforinsertiondepth,toensurethetuberemainedinposition(Figure 6).
Figure 6: Placement of the pressing chain onto fitting or valve
3. Releasethepin (pushandtwist)onthe jawholderof thepressingtool,andinstalltheadapterjawonthetool.Returnthepintoitsoriginalposition,secur-ingthejaw.Theredsleeveonthetoolmustbeinthebackpositiontoallowforcrimpingsizes2½”,3”and4”.(Theredsleeveintheforwardpositionallowsforusewith½”-2”standardpressingjaws.)Rollersonthepressingtoolmustbeintheforwardpositiontoallowtheredsleevetomoveforward (Figure 7).
Figure 7: Placement of adapter jaw into the tool
4. Squeezeadapterjawarmstoopenthejaw.Rollersmustbefullyretractedtoopentheadapterjaw.Placetheopenadapterjawintothegroovesinthepress-ingchainandletgoofthejawarms(Figure8).
Figure 8: Placement of adapter jaw into pressing chain
5. Makesurethetubingisinsertedtotheproperdepthinthefittingorvalve,andthatthetubeandfittingorvalvearealignedproperly.
6. Withthepressingtoolperpendiculartothetube,beginthepressingcyclebypullingthetriggerofthepressingtool.
7. Allowthepressingcycletocomplete.Removethepressingtoolandadapterjawfromthepressingchain.Removethepressingchainfromthefitting.
Ifthetoolmalfunctions,pleaserefertothetoolinstructionmanualfortroubleshootingsuggestions.
CAUTION:Avoidsharpedgesthatmayhaveformedonthefittingduringthecrimpingoperation.
InspectingtheCrimp
1. Inspectthecrimpedfittingorvalvetoensurepropercrimp.Thefinalcrimpshouldappearpresseduniformlyaroundthefittingorvalve(Figure 9).
Figure 9: Inspection of final crimp
NOTE:TheuseoftheNIBCO®PressSystem®chainwillproduceauniquewitnessmark“N”.
2. Inspectthecrimpedfittingcheckingtheconnectionforthefollowingproblems: • Misalignedtube • Notfullyinsertedtube,doublecheckdepthmarks • Incorrectchainalignmentwiththefittingcontour Ifoneormoreoftheseproblemsarefound,anewsectionoftubingandanew
fittingwillneedtobeprepared,installed,andcrimped.
3. Test theNIBCO®PressSystem®inaccordancewithnormalpracticeandtolocaljurisdictionpipingcode.
NIBCO®PressSystem®—InstallationInstructions
CAUTION:NIBCO Press Fittings and Valves (2½”, 3”, 4” ends) to be installed ONLY with:• NIBCO PC-100 Pressing Tool• NIBCO PC-5 Adapter Jaw• NIBCO Pressing Chain - 2½” (PC-2), 3” (PC-3), 4” (PC-4)
A H E A D O F T H E F L O W®www.nibco.com
NIBCO INC. WORLD HEADQUARTERS • 1516 MIDDLEBURY ST. • ELKHART, IN 46516-4740 • USA • PH: 1.800.234.0227 TECH SERVICES PH: 1.888.446.4226 • FAX: 1.888.234.0557 • INTERNATIONAL OFFICE PH: +1.574.295.3327 • FAX: +1.574.295.3455
www.nibco.com
62
Revised 3/11/2010
MinimumDistanceBetweenJoints
To prevent distortion of the tubing, certain fitting sizes require a minimumdistancebetweencrimpjoints(refertoChart 1below).Failuretoprovidethisminimumdistancemayresultinanimproperseal.
Spacing
1. Sufficientclearancemustbe leftaroundeach joint toallowroomfor thepressingtoolandjawtobeattachedwithoutinterference.
ClearanceRequirements—StandardJawSets
NIBCO®PressSystem®—InstallationInstructions
TubeDia. Inches mm Inches mm 1/2 15/16 24 15/8 41 3/4 7/8 22 21/8 54 1 11/4 31 21/2 64 11/4 11/8 29 27/8 73 11/2 2 51 43/8 111 2 2 51 43/8 111
A(min.)B(min.)
TubeDia. Inches mm Inches mm Inches mm 1/2 11/8 28 13/8 35 21/2 64 3/4 1 26 11/2 38 21/2 64 1 15/16 34 13/4 45 3 76 11/4 11/4 32 21/4 57 31/8 80 11/2 21/8 54 31/8 80 5 127 2 21/8 54 31/8 80 5 127 21/2 35/8 92 6 152 31/2 89 3 37/8 98 61/2 165 4 102 4 47/8 124 75/8 194 41/4 108
A(min.)B(min.)C(min.)
SystemSupport
CAUTION—Inanyinstallation,thesystemshouldbesuportedtoensuretheminimumstressisimposedonthetubeandjoints.TheNIBCO®PressSystem® should be supported in accordance with normal practice and tolocaljurisdictionpipingcode.
AnnealingofCopperTube
ANIBCO®PressSystem®installationshouldnotbeconductedwithin12"ofabrazed joint.Thehightemperaturerequiredforcapillaryjoinerymaycausethecoppertubetobecomeannealedandrenderittoosoftforpropercrimping.However,aNIBCO®PressSystem®productmaybecrimpedadja-centtoasolderedjoint,asnormaltemperaturescreatedbysilversolderingarenothotenoughtocausethecoppertubetobecomeannealed.
CAUTION—Brazingorsolderingshouldnotbeconductedwithin12"ofanexistingNIBCO®PressSystem®connectionasthismaydamagetheEPDMseal. Ifthereisanyconcernaboutheatdamagetotheo-ring,acold,wetclothshouldbewrappedaroundthecrimpedconnection
Toolperpendiculartowall
Toolangledtowall
NOTE:Clearancedimensionsfor21/2",3"&4"areforwrap-pingpressingchainsaroundfittings.
A(min.) TubeDia. Inches mm 1⁄2"* 0 0 3⁄4"* 0 0 1"* 0 0 11⁄4"* 0 0 11⁄2"* 0 0 2"* 0 0 21⁄2" 3⁄8" 10 3" 3⁄8" 10 4" 3⁄8" 10
*Nominimumdistancerequired.
A H E A D O F T H E F L O W®www.nibco.com
NIBCO INC. WORLD HEADQUARTERS • 1516 MIDDLEBURY ST. • ELKHART, IN 46516-4740 • USA • PH: 1.800.234.0227 TECH SERVICES PH: 1.888.446.4226 • FAX: 1.888.234.0557 • INTERNATIONAL OFFICE PH: +1.574.295.3327 • FAX: +1.574.295.3455
www.nibco.com63
Revised 3/11/2010
NIBCO®PressSystem®—FrequentlyAskedQuestionsWhatistheNIBCOproductoffering?
TheNIBCO®PressSystem®featuresafullrangeofcopperandcopperalloyfittings,commercialvalves,accessoriesandpressingtools,jawsandchainsforusewithK,LandMcopperwatertube.
Whatisthesystemtemperaturerating?
TheNIBCO®PressSystem®isratedat200PSIGoveratemperaturerangeof-20°Fto250°F.
Whataretheapprovedsystemapplications?
Approvedapplicationsincluderesidentialandcommercialpotable,hot,chilledandprocesswaterforplumbingandHVACsystems.TheNIBCO®PressSystem®isdesignedforusewithwaterglycolmixturesofethyleneorpropyleneglycolupto50%at200°F.
WhatwasthetestingprotocolfortheNIBCO®PressSystem®fittingsandvalves?
NIBCO®PressSystem®fittingsandvalvesweresubjectedtoawiderangeofperformancetestsincludingdimensionalverification,threadendspecification,hydrostaticburststrength,unrestrainedpressure,statictorque,bending,vacuumpressure,cyclicpressure,vibration,thermo-cyclinganddynamictorque.Thetestingprotocolincludedtestingtoa3Xsafetyfactorabovethe200PSIGsystemrating.
NIBCO’stestingwaswitnessedandvalidatedbytheinternationallyrecognizedUnderwritersLaboratories,Inc.(UL).
CanotheravailablepressingtoolsandjawsbeusedontheNIBCO®PressSystem®?
Seepage51foracompletelistingofapprovedtoolsandjaws.
CanaNIBCO®PressSystem®connectionbere-crimped?
If for any reason the press cycle is interrupted, it is possible to re-crimp a NIBCO® Press System® connection. However, whenre-crimpingtheconnection,thejawsmustbeproperlyalignedsothatthecrimpisperformedinthesamelocationastheoriginal.
HowlongwilltheEPDMseallast?
AcceleratedlifetestsshowthattheEPDMsealsusedwiththeNIBCO®PressSystem®fittingsandvalveshavealifeexpectancyof50years.
AreNIBCO®PressSystem®fittingsavailablewithsolderorthreadedbyPressSystemconnection?
NIBCOoffersmanyPressSystemfittingcombinationsbysolderedorthreadedconnection.Pleasenote,alwayssolderthestandardwrotconnectionfirstwhenpossible.Priortosoldering,removethepressendEPDMo-ring,solder,allowthefittingtocool,inserttheEPDMo-ring,andthenPresstheconnection.
CanafittingbesolderedclosetoaPressSystemconnection?
NIBCOrecommendssolderingatleast12inchesawayfromthePressSystemconnection.Ifthislengthisnotpossible,eithersolderthejointpriortoconnectingthepressfittingorwraptheconnectionwithacoldwetcloth.
IstheNIBCO®PressSystem®approvedforundergrounduse?
Inaccordancewithlocalplumbingcodes,theNIBCO®PressSystem®canbeinstalledunderground.
IstheNIBCO®PressSystem®compatiblewithstandarddisinfectantcleaningagentscommonlyutilizedinanewwatersystem?
Yes,theNIBCO®PressSystem®istypicallycompatible.Forspecificcleaningagentcompatibility,contactNIBCOTechnicalServicesatthebelownotednumber.
A H E A D O F T H E F L O W®www.nibco.com
NIBCO INC. WORLD HEADQUARTERS • 1516 MIDDLEBURY ST. • ELKHART, IN 46516-4740 • USA • PH: 1.800.234.0227 TECH SERVICES PH: 1.888.446.4226 • FAX: 1.888.234.0557 • INTERNATIONAL OFFICE PH: +1.574.295.3327 • FAX: +1.574.295.3455
www.nibco.com
64
Revised 3/11/2010
NIBCO®PressSystem®
LimitedWarrantyNIBCOINC.warrants:
• NIBCO®PressSystem®fittingstobefreefromdefectsinmaterialsandworkmanshipundernormaluseandservice,foraperiodof50yearsfromtheWarrantyCommencementDate.TheWarrantyCommencementDateforNIBCO®PressSystem®fittingsshallbethedateuponwhichthefittingisinstalled.
• NIBCO®PressSystem®valvestobefreefromdefectsinmaterialsandworkmanship,undernormaluseandservice,foraperiodthelesserofone(1)yearfromthedatetheNIBCO®PressSystem®valveisputintoservice,ortwo(2)yearsfromthedateofpurchaseoftheNIBCO®PressSystem®valve.
NIBCOdoesNOTwarrantagainstfailureofNIBCO®PressSystem®fittingsand/orNIBCO®PressSystem®valves(referredtohereafteras“product”for:
1. anyproduct,partsorsystemswhicharenotmanufacturedorsoldbyNIBCOINC.;
2. anyproductwhichisusedforanypurposesotherthanapurposeauthorizedbyNIBCOINC.;
3. anyproductnotinstalledinaccordancewitheithertherecommendedinstallationguidelinesprovidedbyNIBCOINC.and/orapplicableplumbingcodes;
4. damagetotheproductcausedby,contributedinwholeorinpartby,orresultingfrom,anyofthefollowing:
a. abuse,misuse,mishandling,tampering,neglectoraccidentaldamage,suchas,withoutlimitation,vandalism
b. naturaldisasters,suchas,withoutlimitation,flooding,windstormandlightning
c. attachmentsormodificationstotheproductthatarenotauthorizedbyNIBCOINC.
d. externalcauses,whereexternal,physicalorchemicalqualitiesproducedamagetotheproduct,suchas,withoutlimitation, variationinwaterquality,aggressivewateroranunsuitableorhostileenvironment,or
e. anyothercausebeyondNIBCOINC.’scontrol.
NIBCOshallNOTbeliableunderanycircumstancesforanyotherdirectorindirect,incidentalorconsequentialdamagesofanykind,includingbutnotlimitedtolossofbusiness,lostprofits,moldintrusion,waterdamage,etc.NIBCO’sliabilityunderthiswarrantyissolelylimitedtotherepairorreplacement,includinginstallationexpenses,ofanyproductthathasbeendeterminedbyNIBCOINC.,oranauthorizedrepresentativeoragentthereof,tocontainadefectinmaterialorworkmanship.
ThiswarrantyistheonlywarrantyfortheproductprovidedbyNIBCOINC.,andisandshallbeinlieuofanyandallotherwarranties,expressedorimplied,includingbutnotlimitedtoanimpliedwarrantyofmerchantability,andforallotherobligationsorliabilitiesonthepartoftheManufacturer.NoemployeeofNIBCOINC.,oranyotherdistributor,agentorotherpersonorbusiness,isauthorizedtomakeanyotherwarrantyonNIBCOINC.’sbehalf.
Intheeventanydefectoccurswhichisbelievedtobecoveredbythiswarranty,NIBCOTechnicalServicesshouldbeimmediatelycontactedeitherinwritingorbytelephoneat888.446.4226.NIBCOTechnicalServiceswillmakefurtherarrangementsfortheproduct’sreturntoNIBCOINC.forreviewandevaluation.IntheeventthatareturnedproductisdeterminedbyNIBCOINC.tobedefective,NIBCOINC.willremediatethefailurebyrepairingorreplacingtheproductwithinareasonabletime,withoutchargetotheowneroftheproduct.
Thiswarrantygivesyouspecificlegalrights,andyoumayalsohaveotherrightswhichvaryfromstatetostate.
NIBCO INC. WORLD HEADQUARTERS • 1516 MIDDLEBURY ST. • ELKHART, IN 46516-4740 • USA • PH: 1.800.234.0227 TECH SERVICES PH:1.888.446.4226 • FAX: 1.888.336.4226 • INTERNATIONAL OFFICE PH: +1.574.295.3327 • FAX: +1.574.295.3455
www.nibco.com
It’s a new age of busi-
ness, and a new way at
NIBCO. From Elkhart,
Indiana to Lodz,
Poland, and points
beyond, our com-
pany has integrated
manufacturing, distribu-
tion, and networked com-
munications to provide a
seamless source of infor-
mation and service, 24 hours
a day, 7 days a week. But
this integration hasn’t hap-
pened overnight. It’s been
part of a long-term strategic
process that has pushed us
to reconsider every aspect
of our business. The result?
We’re a vertically integrated
manufacturer with the prod-
ucts and systems in place
to deliver low cost and high
quality. NIBCO® products are
manufactured under a Quality
Management System con-
forming to the current revi-
sion of ISO-9001 International
Standards. We know the flow
control industry is only going
to get more demanding, and
we are more than ready. We
will continue to lead. That’s
what NIBCO is all about.
globally connecting you at all levels
World Headquarters
Elkhart, Indiana
Metal Valves and Fittings
Blytheville, Arkansas
McAllen, Texas
Nacogdoches, Texas
Stuarts Draft, Virginia
Plastic Pipe, Valves, and Fittings
Greensboro, Georgia
Goshen, Indiana
Lebanon,Ohio
Industrial Plastics
Charlestown, Indiana
International
Reynosa, Mexico
Lodz, Poland
U.S. Distribution Centers
Atlanta, Georgia
Global Offices
Elkhart, Indiana
Lodz, Poland
M A N U FA C T U R I N G D I S T R I B U T I O N I N T E R N AT I O N A L
Pipe Hangers & Support Systems
Corona, California
* ** *
*
*
*
*Denotes U.S. and International Direct Shipping Locations
*
C-NPS-0905 C-NPS-0310
C-NPS-0310 © 2010 NIBCO INC., Al l R ights Reser ved. Pr in ted in U.S.A.
N I B C O I N C .
W O R L D H E A D Q U A R T E R S
W E B : w w w. n i b c o . c o m
1516 M IDD L EBURY S T R E E T
E L KHART, IN 46516 -4740
USA
D O M E S T I C C U S T O M E R S E R V I C E
P H O N E : 8 0 0 . 2 3 4 . 0 2 2 7
FA X : 8 0 0 . 2 3 4 . 0 5 5 7
T E C H N I C A L S E R V I C E
P H O N E : 8 8 8 . 4 4 6 . 4 2 2 6
FA X : 8 8 8 . 3 3 6 . 4 2 2 6
I N T E R N AT I O N A L O F F I C E
P H O N E : + 1 / 5 7 4 . 2 9 5 . 3 3 2 7
FA X : + 1 / 5 7 4 . 2 9 5 . 3 4 5 5
F E AT U R I N G N I BCO® SYSTEMSNIBCO® DURA-PEX™ Piping Systems • NIBCO® Press System®
VALVES & ACTUATIONPressure-rated bronze, iron and alloy-iron gate, globe and check valves • Pressure-rated bronze ball valves • Boiler specialty valves • Commercial and industrial butterfly valves • Circuit balancing valves • Carbon and stainless steel ball valves • ANSI flanged steel ball valves • Pneumatic and electric actuators and controls • Grooved ball and butterfly valves • High performance butterfly valves • UL/FM fire protection valves • MSS specification valves • Bronze specialty valves • Low pressure gate, globe, check and ball valves • Frostproof sillcocks • Quarter--turn supply stops • Quarter-turn low pressure valves • PVC ball valves • CPVC CTS ball valves • Just Right® recirculating valves
F I T T I N G SWrot and cast copper pressure and drainage fittings • Cast copper alloy flanges • Wrot and cast press fittings • ABS and PVC DWV fittings • Schedule 40 PVC pressure fittings • CPVC CTS fittings • CPVC CTS- to -metal transition fittings • Schedule 80 PVC and CPVC systems • CPVC metric piping systems • CPVC BlazeMaster® fire protection fittings
CHEMTROL®
Thermoplastic pipe, valves and fittings in PVC, Corzan® CPVC, polypropylene and PVDF KYNAR® • Pneumatic and electric actuation systems
Corzan® is a registered trademark of The Lubrizol Corporation. • KYNAR® is a registered trademark of Arkema Inc.
TOLCO®
Pipe attachments • Structural attachments • Pipe rollers • Threaded products and accessories • Seismic components • Standard and specialty supports • Markets served include commercial, industrial & fire protection
eNIBCOEDI—Electronic Data Interchange • VMI—Vendor Managed Inventory • NIBCO.com • NIBCOpartner.com
BlazeMaster® is a registered trademark of The Lubrizol Corporation.
®