Post on 01-Apr-2018
MX² 30
Dehumidifier
Product descriptionThe MX² 30 combines traditional Munters strengths like efficiency androbustness with modern state of the art technology like modulating RHcontrol and communication.
Low energy consumption and reliability are important in todaysprocesses. Our modern control system together with high efficient fanswhich, meet the EU Ecodesign directive, supported with frequencyconverters give you numerous options to optimise your energyconsumption. The Energy Recovery Purge (ERP) or Energy EfficiencyPurge (EEP) is available as a standard option in order to save energy.
The MX² 30 is equipped with a number of alarm functions to ensuretotal control of the dehumidification process. Frame casing and outerpanels are made of corrosion resistant AluZink and coated in RAL 7035.
The MX² 30 dehumidifier covers a wide range of needs by providing avariety of standard functions. The numerous options will allow pre- andpost-treatment by simply adding mechanical and electrical components.
The MX² 30 can be supplied with 3 different reactivation alternatives -electrical, steam and gas. A service indicator activates when a preventativeservice is due, this is a standard feature. To make installation easier theprocess fan inlet has been designed to allow for different outlet positions.
The electrical equipment conforms to EN 60204 (IEC204). The MX²series of dehumidifiers conform to both harmonised European standardsand technical specifications for CE marking.
Munters Rotor TechnologyMunters desiccant rotors are highly effective moisture-absorbingsubstances. An option for the MX² series rotor technology is the ERP orEEP solution reducing the energy consumption.
PRODUCT INFORMATION
MX² 30
Features
- Efficient dehumidification between-20°C and 40°C
- Modulating humidity controlincluding wet air temp sensor
- Communication and externalcontrol options
- Filter and rotor stop alarm asstandard
- Energy saving options
- Service and running indicatoralarm as external indicators
Model MX² 30Diagram measurements are for referenceonly.
Height (C)
1872mm Dry air 220x400mm
Wet air 110x222mm
Weight 407kg
Width (A/D) 800/1896mm
Depth (B) 810mm
Technical Specification
Process AirRated airflow (m³/h) 2700Available static pressure (Pa) 300Fan power (kW) 2.2
Reactivation airRated airflow (m³/h) 900Fan Power (kW) 0.75Static Pressure at rated airflow (m³/h) 300
Total power,voltage and current (amps/phase)Total power (kW) Electrical 33.4Total power (kW) Steam/Gas 3.4380V 3-50 Hz (A) Electrical 53380V 3-50 Hz (A) Steam/Gas 7400V 3-50 Hz (A) Electrical 50400V 3-50 Hz (A) Steam/Gas 7415V 3-50 Hz (A) Electrical 48415V 3-50 Hz (A) Steam/Gas 7440V 3-60 Hz (A) Electrical 46440V 3-60 Hz (A) Steam/Gas 6Max steam working pressure (bar) (g) 7Gas consumption (m³/h) 2.95Natural gas pressure (mbar) 18-49Max sulphur content (ppm) HPS Rotor 30Steam consumption 3 bar (g/s) 14.1Steam consumption 5 bar (g/s) 14.4Total power with ERP,Electrical (kW) 28.4Steam consumption with ERP 3 bar (g) 11.7Gas consumption with ERP (m3/h) 2.46Moisture removal 20°C, 60% (kg/24hr) 535
Steam consumption with ERP 5 Bar (g) 12.0
-20-+4082
3354G3
Miscellaneous DataOperating temperature (ºC)Sound power level to room Lw(A)dB, all inlets and outlets ducted IEC protective class (unit)IEC protective class (electrical panel)Filter classMotor winding insulation F
DehumidificationCapacityApproximate capacity in kg/h atdifferent inlet process air relativehumidity % RH
Process air temperature °C
Options
• Bypass• Communication via Modbus, BACnet
or Lon• Dewpoint sensor• Energy Efficiency Purge (EEP)• Energy Recovery Purge (ERP)• External controls• Filters M5, G4 or G4/F7 combination• Heaters-gas,electric or steam• Pre-react heaters - heat water or steam• Insulated process air inlet• Mirror handed• Stainless steel casing• Touch screen display
DH/MEA/PGB/-0110--15/03
Sub
ject
to c
hang
e w
ithou
t not
ice
AUSTRALIATel +61 2 8843 1588
AUSTRIATel +43 1 6164298-0
BELGIUMTel +32 2 240 68 68
BRAZILTel +55 41 3317 5050
CANADATel +1 905 8585894
CHINATel +86 10 804 18000
DENMARKTel +45 4495 3355
FINLANDTel +358 20 776 8230
FRANCETel +33 1 3411 5757
GERMANYTel +49 40-879690-0
INDIATel +91 20 668 18 900
ITALYTel +39 0183 521377
JAPANTel +81 3 5970 0021
KOREATel +82 2 761 8701
MEXICOTel +1 52 722 270-4029
NETHERLANDSTel +31 172 43 32 31
POLANDTel +48 58 305 35 17
SINGAPORETel +65 6744 6828
SOUTH AFRICATel +27 11 997 2000
SPAINTel +34 91 640 09 02
SWEDENTel +46 8-626 6300
SWITZERLANDTel +41 52 3438886
THAILANDTel +66 2 642 2670-3
TURKEYTel +90 262 751 3750
UNIT. ARAB EMIRATESTel +971 4 8809295
UNITED KINGDOMTel +44 1480 432 243
UNITED STATESTel +1 978 241 1100
VIETNAMTel +84 8 825 6838 www.munters.com
MX² 35
Dehumidifier
Product descriptionThe MX² 35 combines traditional Munters strengths like efficiency androbustness with modern state of the art technology like modulating RHcontrol and communication.
Low energy consumption and reliability are important in todaysprocesses. Our modern control system together with high efficient fanswhich, meet the EU Ecodesign directive, supported with frequencyconverters give you numerous options to optimise your energyconsumption. The Energy Recovery Purge (ERP) or Energy EfficiencyPurge (EEP) is available as a standard option in order to save energy.
The MX² 35 is equipped with a number of alarm functions to ensuretotal control of the dehumidification process. Frame casing and outerpanels are made of corrosion resistant AluZink and coated in RAL 7035.
The MX² 35 dehumidifier covers a wide range of needs by providing avariety of standard functions. The numerous options will allow pre- andpost-treatment by simply adding mechanical and electrical components.
The MX² 35 can be supplied with 3 different reactivation alternatives -electrical, steam and gas. A service indicator activates when a preventativeservice is due, this is a standard feature. To make installation easier theprocess fan inlet has been designed to allow for different outlet positions.
The electrical equipment conforms to EN 60204 (IEC204). The MX²series of dehumidifiers conform to both harmonised European standardsand technical specifications for CE marking.
Munters Rotor TechnologyMunters desiccant rotors are highly effective moisture-absorbingsubstances. An option for the MX² series rotor technology is the ERP orEEP solution reducing the energy consumption.
PRODUCT INFORMATION
MX² 35
Features
- Efficient dehumidification between-20°C and 40°C
- Modulating humidity controlincluding wet air temp sensor
- Communication and externalcontrol options
- Filter and rotor stop alarm asstandard
- Energy saving options
- Service and running indicatoralarm as external indicators
Model MX² 35Diagram measurements are for referenceonly.
Height (C) 1909mm
Dry air 247x450mm
Wet air 154x250mm
Weight 492kg
Width (A/D) 1068/2297mm
Depth (B) 1091mm
Technical Specification
Process AirRated airflow (m³/h) 3500Available static pressure (Pa) 300Fan power (kW) 3
Reactivation airRated airflow (m³/h) 1080Fan Power (kW) 1.1Static Pressure at rated airflow (m³/h) 300
Total power,voltage and current (amps/phase)Total power (kW) Electrical 40.6Total power (kW) Steam/Gas 4.6Max sulphur content (ppm) HPS Rotor 30380V 3-50 Hz (A) Electrical 64380V 3-50 Hz (A) Steam/Gas 10400V 3-50 Hz (A) Electrical 61400V 3-50 Hz (A) Steam/Gas 9415V 3-50 Hz (A) Electrical 59415V 3-50 Hz (A) Steam/Gas 9440V 3-60 Hz (A) Electrical 56440V 3-60 Hz (A) Steam/Gas 8Max steam working pressure (bar) (g) 7Gas consumption (m³/h) 3.54Natural gas pressure (mbar) 18-49Max sulphur content (ppm) HPS Rotor 30Steam consumption 3 bar (g/s) 16.9Steam consumption 5 bar (g/s) 17.3Total power with ERP,Electrical (kW) 40.6Steam consumption with ERP 3 bar (g) 16.9Gas consumption with ERP (m3/h) 3.54
Moisture removal 20°C, 60% (kg/24hr) 520Steam consumption with ERP 5 Bar (g) 17.3
Miscellaneous DataOperating temperature (ºC) -20-+40Max. noise level, all ducts connected (dbA) 69IEC protective class (unit) 33IEC protective class (electrical panel) 54Filter class G4Motor winding insulation F
DehumidificationCapacityApproximate capacity in kg/h atdifferent inlet process air relativehumidity % RH
Process air temperature °C
Options
• Bypass• Communication via Modbus, BACnet
or Lon• Dewpoint sensor• Energy Efficiency Purge (EEP)• Energy Recovery Purge (ERP)• External controls• Filters M5, G4 or G4/F7 combination• Heaters-gas,electric or steam• Pre-react heaters - heat water or steam• Insulated process air inlet• Mirror handed• Stainless steel casing• Touch screen display
DH/MEA/PGB/-0110--15/03
Sub
ject
to c
hang
e w
ithou
t not
ice
AUSTRALIATel +61 2 8843 1588
AUSTRIATel +43 1 6164298-0
BELGIUMTel +32 2 240 68 68
BRAZILTel +55 41 3317 5050
CANADATel +1 905 8585894
CHINATel +86 10 804 18000
DENMARKTel +45 4495 3355
FINLANDTel +358 20 776 8230
FRANCETel +33 1 3411 5757
GERMANYTel +49 40-879690-0
INDIATel +91 20 668 18 900
ITALYTel +39 0183 521377
JAPANTel +81 3 5970 0021
KOREATel +82 2 761 8701
MEXICOTel +1 52 722 270-4029
NETHERLANDSTel +31 172 43 32 31
POLANDTel +48 58 305 35 17
SINGAPORETel +65 6744 6828
SOUTH AFRICATel +27 11 997 2000
SPAINTel +34 91 640 09 02
SWEDENTel +46 8-626 6300
SWITZERLANDTel +41 52 3438886
THAILANDTel +66 2 642 2670-3
TURKEYTel +90 262 751 3750
UNIT. ARAB EMIRATESTel +971 4 8809295
UNITED KINGDOMTel +44 1480 432 243
UNITED STATESTel +1 978 241 1100
VIETNAMTel +84 8 825 6838 www.munters.com
MX² 40
Dehumidifier
Product descriptionThe MX² 40 combines traditional Munters strengths like efficiency androbustness with modern state of the art technology like modulating RHcontrol and communication.
Low energy consumption and reliability are important in todaysprocesses. Our modern control system together with high efficient fanswhich, meet the EU Ecodesign directive, supported with frequencyconverters give you numerous options to optimise your energyconsumption. The Energy Recovery Purge (ERP) or Energy EfficiencyPurge (EEP) is available as a standard option in order to save energy.
The MX² 40 is equipped with a number of alarm functions to ensuretotal control of the dehumidification process. Frame casing and outerpanels are made of corrosion resistant AluZink and coated in RAL 7035.
The MX² 40 dehumidifier covers a wide range of needs by providing avariety of standard functions. The numerous options will allow pre- andpost-treatment by simply adding mechanical and electrical components.
The MX² 40 can be supplied with 3 different reactivation alternatives -electrical, steam and gas. A service indicator activates when a preventativeservice is due, this is a standard feature. To make installation easier theprocess fan inlet has been designed to allow for different outlet positions.
The electrical equipment conforms to EN 60204 (IEC204). The MX²series of dehumidifiers conform to both harmonised European standardsand technical specifications for CE marking.
Munters Rotor TechnologyMunters desiccant rotors are highly effective moisture-absorbingsubstances. An option for the MX2 series rotor technology is the ERP orEEP solution reducing the energy consumption.
PRODUCT INFORMATION
MX² 40
Features
- Efficient dehumidification between-20°C and 40°C
- Modulating humidity controlincluding wet air temp sensor
- Communication and externalcontrol options
- Filter and rotor stop alarm asstandard
- Energy saving options
- Service and running indicatoralarm as external indicators
Model MX² 40Diagram measurements are for referenceonly.
Height (C) 1909mm
Dry air 247x450mm
Wet air 154x250mm
Weight 557kg
Width (A/D) 1068/2297mm
Depth (B) 1091mm
Technical Specification
Process AirRated airflow (m³/h) 4000Available static pressure (Pa) 300Fan power (kW) 3
Reactivation airRated airflow (m³/h) 1260Fan Power (kW) 1.1Static Pressure at rated airflow (m³/h) 300
Total power,voltage and current (amps/phase)Total power (kW) Electrical 46.6Total power (kW) Steam/Gas 4.6Max sulphur content (ppm) HPS Rotor 30380V 3-50 Hz (A) Electrical 74380V 3-50 Hz (A) Steam/Gas 10400V 3-50 Hz (A) Electrical 70400V 3-50 Hz (A) Steam/Gas 9415V 3-50 Hz (A) Electrical 67415V 3-50 Hz (A) Steam/Gas 9440V 3-60 Hz (A) Electrical 63440V 3-60 Hz (A) Steam/Gas 8Max steam working pressure (bar) (g) 7Gas consumption (m³/h) 4.13Natural gas pressure (mbar) 18-49Max sulphur content (ppm) HPS Rotor 30Steam consumption 3 bar (g/s) 19.7Steam consumption 5 bar (g/s) 20.1Total power with ERP,Electrical (kW) 40.6Steam consumption with ERP 3 bar (g) 16.9Gas consumption with ERP (m3/h) 3.54
Moisture removal 20°C, 60% (kg/24hr) 768Steam consumption with ERP 5 Bar (g) 17.3
-20-+4085
3354G4
Miscellaneous DataOperating temperature (ºC)Sound power level to room Lw(A)dB, all inlets and outlets ducted IEC protective class (unit)IEC protective class (electrical panel) Filter classMotor winding insulation F
DehumidificationCapacityApproximate capacity in kg/h atdifferent inlet process air relativehumidity % RH
Process air temperature °C
Options
• Bypass• Communication via Modbus, BACnet
or Lon• Dewpoint sensor• Energy Efficiency Purge (EEP)• Energy Recovery Purge (ERP)• External controls• Filters M5, G4 or G4/F7 combination• Heaters-gas,electric or steam• Pre-react heaters - heat water or steam• Insulated process air inlet• Mirror handed• Stainless steel casing• Touch screen display
DH/MEA/PGB/-0110--15/03
Sub
ject
to c
hang
e w
ithou
t not
ice
AUSTRALIATel +61 2 8843 1588
AUSTRIATel +43 1 6164298-0
BELGIUMTel +32 2 240 68 68
BRAZILTel +55 41 3317 5050
CANADATel +1 905 8585894
CHINATel +86 10 804 18000
DENMARKTel +45 4495 3355
FINLANDTel +358 20 776 8230
FRANCETel +33 1 3411 5757
GERMANYTel +49 40-879690-0
INDIATel +91 20 668 18 900
ITALYTel +39 0183 521377
JAPANTel +81 3 5970 0021
KOREATel +82 2 761 8701
MEXICOTel +1 52 722 270-4029
NETHERLANDSTel +31 172 43 32 31
POLANDTel +48 58 305 35 17
SINGAPORETel +65 6744 6828
SOUTH AFRICATel +27 11 997 2000
SPAINTel +34 91 640 09 02
SWEDENTel +46 8-626 6300
SWITZERLANDTel +41 52 3438886
THAILANDTel +66 2 642 2670-3
TURKEYTel +90 262 751 3750
UNIT. ARAB EMIRATESTel +971 4 8809295
UNITED KINGDOMTel +44 1480 432 243
UNITED STATESTel +1 978 241 1100
VIETNAMTel +84 8 825 6838 www.munters.com
MX² 55
Dehumidifier
Product descriptionThe MX² 55 combines traditional Munters strengths like efficiency androbustness with modern state of the art technology like modulating RHcontrol and communication.
Low energy consumption and reliability are important in todaysprocesses. Our modern control system together with high efficient fanswhich, meet the EU Ecodesign directive, supported with frequencyconverters give you numerous options to optimise your energyconsumption. The Energy Recovery Purge (ERP) or Energy EfficiencyPurge (EEP) is available as a standard option in order to save energy.
The MX² 55 is equipped with a number of alarm functions to ensuretotal control of the dehumidification process. Frame casing and outerpanels are made of corrosion resistant AluZink and coated in RAL 7035.
The MX² 55 dehumidifier covers a wide range of needs by providing avariety of standard functions. The numerous options will allow pre- andpost-treatment by simply adding mechanical and electrical components.
The MX² 55 can be supplied with 3 different reactivation alternatives -electrical, steam and gas. A service indicator activates when a preventativeservice is due, this is a standard feature. To make installation easier theprocess fan inlet has been designed to allow for different outlet positions.
The electrical equipment conforms to EN 60204 (IEC204). The MX²series of dehumidifiers conform to both harmonised European standardsand technical specifications for CE marking.
Munters Rotor TechnologyMunters desiccant rotors are highly effective moisture-absorbingsubstances. An option for the MX² series rotor technology is the ERP orEEP solution reducing the energy consumption.
PRODUCT INFORMATION
MX² 55
Features
- Efficient dehumidification between-20°C and 40°C
- Modulating humidity controlincluding wet air temp sensor
- Communication and externalcontrol options
- Filter and rotor stop alarm asstandard
- Energy saving options
- Service and running indicatoralarm as external indicators
Model MX² 55Diagram measurements are for referenceonly.
Height (C) 1909mm
Dry air 247x450mm
Wet air 154x250mm
Weight 492kg
Width (A/D) 1068/2297mm
Depth (B) 1091mm
Technical Specification
Process AirRated airflow (m³/h) 5500Available static pressure (Pa) 300Fan power (kW) 3
Reactivation airRated airflow (m³/h) 1080Fan Power (kW) 1.1Static Pressure at rated airflow (m³/h) 300
Total power,voltage and current (amps/phase)Total power (kW) Electrical 40.6Total power (kW) Steam/Gas 4.6380V 3-50 Hz (A) Electrical 64380V 3-50 Hz (A) Steam/Gas 10400V 3-50 Hz (A) Electrical 61400V 3-50 Hz (A) Steam/Gas 9415V 3-50 Hz (A) Electrical 59415V 3-50 Hz (A) Steam/Gas 9440V 3-60 Hz (A) Electrical 56440V 3-60 Hz (A) Steam/Gas 8Max steam working pressure (bar) (g) 7Gas consumption (m³/h) 3.54Natural gas pressure (mbar) 18-49Max sulphur content (ppm) HPS Rotor 30Steam consumption 3 bar (g/s) 16.9Steam consumption 5 bar (g/s) 17.3Total power with ERP,Electrical (kW) 40.6Steam consumption with ERP 3 bar (g) 16.9Gas consumption with ERP (m3/h) 3.54Moisture removal 20°C, 60% (kg/24hr) 660
Steam consumption with ERP 5 Bar (g) 17.3
-20-+4085
3354G4
Miscellaneous DataOperating temperature (ºC)Sound power level to room Lw(A)dB, all inlets and outlets ducted IEC protective class (unit)IEC protective class (electrical panel) Filter classMotor winding insulation F
DehumidificationCapacityApproximate capacity in kg/h atdifferent inlet process air relativehumidity % RH
Process air temperature °C
Options
• Bypass• Communication via Modbus, BACnet
or Lon• Dewpoint sensor• Energy Efficiency Purge (EEP)• Energy Recovery Purge (ERP)• External controls• Filters M5, G4 or G4/F7 combination• Heaters-gas,electric or steam• Pre-react heaters - heat water or steam• Insulated process air inlet• Mirror handed• Stainless steel casing• Touch screen display
DH/MEA/PGB/-0110--15/03
Sub
ject
to c
hang
e w
ithou
t not
ice
AUSTRALIATel +61 2 8843 1588
AUSTRIATel +43 1 6164298-0
BELGIUMTel +32 2 240 68 68
BRAZILTel +55 41 3317 5050
CANADATel +1 905 8585894
CHINATel +86 10 804 18000
DENMARKTel +45 4495 3355
FINLANDTel +358 20 776 8230
FRANCETel +33 1 3411 5757
GERMANYTel +49 40-879690-0
INDIATel +91 20 668 18 900
ITALYTel +39 0183 521377
JAPANTel +81 3 5970 0021
KOREATel +82 2 761 8701
MEXICOTel +1 52 722 270-4029
NETHERLANDSTel +31 172 43 32 31
POLANDTel +48 58 305 35 17
SINGAPORETel +65 6744 6828
SOUTH AFRICATel +27 11 997 2000
SPAINTel +34 91 640 09 02
SWEDENTel +46 8-626 6300
SWITZERLANDTel +41 52 3438886
THAILANDTel +66 2 642 2670-3
TURKEYTel +90 262 751 3750
UNIT. ARAB EMIRATESTel +971 4 8809295
UNITED KINGDOMTel +44 1480 432 243
UNITED STATESTel +1 978 241 1100
VIETNAMTel +84 8 825 6838 www.munters.com
MX² 60
Dehumidifier
Product descriptionThe MX² 60 combines traditional Munters strengths like efficiency androbustness with modern state of the art technology like modulating RHcontrol and communication.
Low energy consumption and reliability are important in todaysprocesses. Our modern control system together with high efficient fanswhich, meet the EU Ecodesign directive, supported with frequencyconverters give you numerous options to optimise your energyconsumption. The Energy Recovery Purge (ERP) or Energy EfficiencyPurge (EEP) is available as a standard option in order to save energy.
The MX² 60 is equipped with a number of alarm functions to ensuretotal control of the dehumidification process. Frame casing and outerpanels are made of corrosion resistant AluZink and coated in RAL 7035.
The MX² 60 dehumidifier covers a wide range of needs by providing avariety of standard functions. The numerous options will allow pre- andpost-treatment by simply adding mechanical and electrical components.
The MX² 60 can be supplied with 3 different reactivation alternatives -electrical, steam and gas. A service indicator activates when a preventativeservice is due, this is a standard feature. To make installation easier theprocess fan inlet has been designed to allow for different outlet positions.
The electrical equipment conforms to EN 60204 (IEC204). The MX²series of dehumidifiers conform to both harmonised European standardsand technical specifications for CE marking.
Munters Rotor TechnologyMunters desiccant rotors are highly effective moisture-absorbingsubstances. An option for the MX² series rotor technology is the ERP orEEP solution reducing the energy consumption.
PRODUCT INFORMATION
MX² 60
Features
- Efficient dehumidification between-20°C and 40°C
- Modulating humidity controlincluding wet air temp sensor
- Communication and externalcontrol options
- Filter and rotor stop alarm asstandard
- Energy saving options
- Service and running indicatoralarm as external indicators
Model MX² 60Diagram measurements are for referenceonly.
Height (C) 2214mm
Dry air 273x500mm
Wet air 185x400mm
Weight 721kg
Width (A/D) 1068/2416mm
Depth (B) 1307mm
Technical Specification
Process AirRated airflow (m³/h) 6000Available static pressure (Pa) 300Fan power (kW) 7.5
Reactivation airRated airflow (m³/h) 1980Fan Power (kW) 1.5Static Pressure at rated airflow (m³/h) 300
Total power,voltage and current (amps/phase)Total power (kW) Electrical 75.5Total power (kW) Steam/Gas 9.5380V 3-50 Hz (A) Electrical 119380V 3-50 Hz (A) Steam/Gas 19400V 3-50 Hz (A) Electrical 113400V 3-50 Hz (A) Steam/Gas 18415V 3-50 Hz (A) Electrical 109415V 3-50 Hz (A) Steam/Gas 17440V 3-60 Hz (A) Electrical 103440V 3-60 Hz (A) Steam/Gas 16Max steam working pressure (bar) (g) 7Gas consumption (m³/h) 6.5Natural gas pressure (mbar) 18-49Max sulphur content (ppm) HPS Rotor 30Steam consumption 3 bar (g/s) 30.9Steam consumption 5 bar (g/s) 31.6Total power with ERP,Electrical (kW) 69.5Steam consumption with ERP 3 bar (g) 28.1Gas consumption with ERP (m3/h) 5.91Moisture removal 20°C, 60% (kg/24hr) 1220
Steam consumption with ERP 5 Bar (g) 28.8
-20-+4087
3354G4
Miscellaneous DataOperating temperature (ºC)Sound power level to room Lw(A)dB, all inlets and outlets ducted IEC protective class (unit)IEC protective class (electrical panel) Filter classMotor winding insulation F
DehumidificationCapacityApproximate capacity in kg/h atdifferent inlet process air relativehumidity % RH
Process air temperature °C
Options
• Bypass• Communication via Modbus, BACnet
or Lon• Dewpoint sensor• Energy Efficiency Purge (EEP)• Energy Recovery Purge (ERP)• External controls• Filters M5, G4 or G4/F7 combination• Heaters-gas,electric or steam• Pre-react heaters - heat water or steam• Insulated process air inlet• Mirror handed• Stainless steel casing• Touch screen display
DH/MEA/PGB/-0110--15/03
Sub
ject
to c
hang
e w
ithou
t not
ice
AUSTRALIATel +61 2 8843 1588
AUSTRIATel +43 1 6164298-0
BELGIUMTel +32 2 240 68 68
BRAZILTel +55 41 3317 5050
CANADATel +1 905 8585894
CHINATel +86 10 804 18000
DENMARKTel +45 4495 3355
FINLANDTel +358 20 776 8230
FRANCETel +33 1 3411 5757
GERMANYTel +49 40-879690-0
INDIATel +91 20 668 18 900
ITALYTel +39 0183 521377
JAPANTel +81 3 5970 0021
KOREATel +82 2 761 8701
MEXICOTel +1 52 722 270-4029
NETHERLANDSTel +31 172 43 32 31
POLANDTel +48 58 305 35 17
SINGAPORETel +65 6744 6828
SOUTH AFRICATel +27 11 997 2000
SPAINTel +34 91 640 09 02
SWEDENTel +46 8-626 6300
SWITZERLANDTel +41 52 3438886
THAILANDTel +66 2 642 2670-3
TURKEYTel +90 262 751 3750
UNIT. ARAB EMIRATESTel +971 4 8809295
UNITED KINGDOMTel +44 1480 432 243
UNITED STATESTel +1 978 241 1100
VIETNAMTel +84 8 825 6838 www.munters.com
MX² 80
Dehumidifier
Product descriptionThe MX² 80 combines traditional Munters strengths like efficiency androbustness with modern state of the art technology like modulating RHcontrol and communication.
Low energy consumption and reliability are important in todaysprocesses. Our modern control system together with high efficient fanswhich, meet the EU Ecodesign directive, supported with frequencyconverters give you numerous options to optimise your energyconsumption. The Energy Recovery Purge (ERP) or Energy EfficiencyPurge (EEP) is available as a standard option in order to save energy.
The MX² 80 is equipped with a number of alarm functions to ensuretotal control of the dehumidification process. Frame casing and outerpanels are made of corrosion resistant AluZink and coated in RAL 7035.
The MX² 80 dehumidifier covers a wide range of needs by providing avariety of standard functions. The numerous options will allow pre- andpost-treatment by simply adding mechanical and electrical components.
The MX² 80 can be supplied with 3 different reactivation alternatives -electrical, steam and gas. A service indicator activates when a preventativeservice is due, this is a standard feature. To make installation easier theprocess fan inlet has been designed to allow for different outlet positions.
The electrical equipment conforms to EN 60204 (IEC204). The MX²series of dehumidifiers conform to both harmonised European standardsand technical specifications for CE marking.
Munters Rotor TechnologyMunters desiccant rotors are highly effective moisture-absorbingsubstances. An option for the MX² series rotor technology is the ERP orEEP solution reducing the energy consumption.
PRODUCT INFORMATION
MX² 80
Features
- Efficient dehumidification between-20°C and 40°C
- Modulating humidity controlincluding wet air temp sensor
- Communication and externalcontrol options
- Filter and rotor stop alarm asstandard
- Energy saving options
- Service and running indicatoralarm as external indicators
Model MX² 80Diagram measurements are for referenceonly.
Height (C) 2214mm
Dry air 273x500mm
Wet air 231x450mm
Weight 729kg
Width (A/D) 1068/2489mm
Depth (B) 1307mm
Technical Specification
Process AirRated airflow (m³/h) 8000Maximum static pressure (Pa) 300Fan power (kW) 7.5
Reactivation airRated airflow (m³/h) 2520Fan Power (kW) 2.2Static Pressure at rated airflow (m³/h) 300
Total power,voltage and current (amps/phase)Total power (kW) Electrical 94.2Total power (kW) Steam/Gas 10.2380V 3-50 Hz (A) Electrical 148380V 3-50 Hz (A) Steam/Gas 20400V 3-50 Hz (A) Electrical 141400V 3-50 Hz (A) Steam/Gas 19415V 3-50 Hz (A) Electrical 135415V 3-50 Hz (A) Steam/Gas 18440V 3-60 Hz (A) Electrical 128440V 3-60 Hz (A) Steam/Gas 17Max steam working pressure (bar) (g) 7Gas consumption (m³/h) 8.27Natural gas pressure (mbar) 18-49Max sulphur content (ppm) HPS Rotor 30Steam consumption 3 bar (g/s) 39.4Steam consumption 5 bar (g/s) 40.3Total power with ERP,Electrical (kW) 88.2Steam consumption with ERP 3 bar (g) 36.6Gas consumption with ERP (m3/h) 7.68Moisture removal 20°C, 60% (kg/24hr) 1550
Steam consumption with ERP 5 Bar (g) 37.4
-20-+4090
3354G4
Miscellaneous DataOperating temperature (ºC)Sound power level to room Lw(A)dB, all inlets and outlets ducted IEC protective class (unit)IEC protective class (electrical panel) Filter classMotor winding insulation F
DehumidificationCapacityApproximate capacity in kg/h atdifferent inlet process air relativehumidity % RH
Process air temperature °C
Options
• Bypass• Communication via Modbus, BACnet
or Lon• Dewpoint sensor• Energy Efficiency Purge (EEP)• Energy Recovery Purge (ERP)• External controls• Filters M5, G4 or G4/F7 combination• Heaters-gas,electric or steam• Pre-react heaters - heat water or steam• Insulated process air inlet• Mirror handed• Stainless steel casing• Touch screen display
DH/MEA/PGB/-0110--15/03
Sub
ject
to c
hang
e w
ithou
t not
ice
AUSTRALIATel +61 2 8843 1588
AUSTRIATel +43 1 6164298-0
BELGIUMTel +32 2 240 68 68
BRAZILTel +55 41 3317 5050
CANADATel +1 905 8585894
CHINATel +86 10 804 18000
DENMARKTel +45 4495 3355
FINLANDTel +358 20 776 8230
FRANCETel +33 1 3411 5757
GERMANYTel +49 40-879690-0
INDIATel +91 20 668 18 900
ITALYTel +39 0183 521377
JAPANTel +81 3 5970 0021
KOREATel +82 2 761 8701
MEXICOTel +1 52 722 270-4029
NETHERLANDSTel +31 172 43 32 31
POLANDTel +48 58 305 35 17
SINGAPORETel +65 6744 6828
SOUTH AFRICATel +27 11 997 2000
SPAINTel +34 91 640 09 02
SWEDENTel +46 8-626 6300
SWITZERLANDTel +41 52 3438886
THAILANDTel +66 2 642 2670-3
TURKEYTel +90 262 751 3750
UNIT. ARAB EMIRATESTel +971 4 8809295
UNITED KINGDOMTel +44 1480 432 243
UNITED STATESTel +1 978 241 1100
VIETNAMTel +84 8 825 6838 www.munters.com
MX² 95
Dehumidifier
Product descriptionThe MX² 95 combines traditional Munters strengths like efficiency androbustness with modern state of the art technology like modulating RHcontrol and communication.
Low energy consumption and reliability are important in todaysprocesses. Our modern control system together with high efficient fanswhich, meet the EU Ecodesign directive, supported with frequencyconverters give you numerous options to optimise your energyconsumption. The Energy Recovery Purge (ERP) or Energy EfficiencyPurge (EEP) is available as a standard option in order to save energy.
The MX² 95 is equipped with a number of alarm functions to ensuretotal control of the dehumidification process. Frame casing and outerpanels are made of corrosion resistant AluZink and coated in RAL 7035.
The MX² 95 dehumidifier covers a wide range of needs by providing avariety of standard functions. The numerous options will allow pre- andpost-treatment by simply adding mechanical and electrical components.
The MX² 95 can be supplied with 3 different reactivation alternatives -electrical, steam and gas. A service indicator activates when a preventativeservice is due, this is a standard feature. To make installation easier theprocess fan inlet has been designed to allow for different outlet positions.
The electrical equipment conforms to EN 60204 (IEC204). The MX²series of dehumidifiers conform to both harmonised European standardsand technical specifications for CE marking.
Munters Rotor TechnologyMunters desiccant rotors are highly effective moisture-absorbingsubstances. An option for the MX² series rotor technology is the ERP orEEP solution reducing the energy consumption.
PRODUCT INFORMATION
MX² 95
Features
- Efficient dehumidification between-20°C and 40°C
- Modulating humidity controlincluding wet air temp sensor
- Communication and externalcontrol options
- Filter and rotor stop alarm asstandard
- Energy saving options
- Service and running indicatoralarm as external indicators
Model MX² 95Diagram measurements are for referenceonly.
Height (C) 2214mm
Dry air 273x500mm
Wet air 185x400mm
Weight 673kg
Width (A/D) 1068/2416mm
Depth (B) 1307mm
Technical Specification
Process AirRated airflow (m³/h) 9500Available static pressure (Pa) 300Fan power (kW) 7.5
Reactivation airRated airflow (m³/h) 1800Fan Power (kW) 1.5Static Pressure at rated airflow (m³/h) 300
Total power,voltage and current (amps/phase)Total power (kW) Electrical 69.5Total power (kW) Steam/Gas 9.5380V 3-50 Hz (A) Electrical 110380V 3-50 Hz (A) Steam/Gas 19400V 3-50 Hz (A) Electrical 105400V 3-50 Hz (A) Steam/Gas 18415V 3-50 Hz (A) Electrical 101415V 3-50 Hz (A) Steam/Gas 17440V 3-60 Hz (A) Electrical 95440V 3-60 Hz (A) Steam/Gas 16Max steam working pressure (bar) (g) 7Gas consumption (m³/h) 5.91Natural gas pressure (mbar) 18-49Max sulphur content (ppm) HPS Rotor 30Steam consumption 3 bar (g/s) 28.1Steam consumption 5 bar (g/s) 28.8Total power with ERP,Electrical (kW) 69.5Steam consumption with ERP 3 bar (g) 28.1Gas consumption with ERP (m3/h) 5.91Moisture removal 20°C, 60% (kg/24hr) 1150Steam consumption with ERP 5 Bar (g) 28.8
-20-+4090
3354G4
Miscellaneous DataOperating temperature (ºC)Sound power level to room Lw(A)dB, all inlets and outlets ductedIEC protective class (unit)IEC protective class (electrical panel) Filter classMotor winding insulation F
DehumidificationCapacityApproximate capacity in kg/h atdifferent inlet process air relativehumidity % RH
Process air temperature °C
Options
• Bypass• Communication via Modbus, BACnet
or Lon• Dewpoint sensor• Energy Efficiency Purge (EEP)• Energy Recovery Purge (ERP)• External controls• Filters M5, G4 or G4/F7 combination• Heaters-gas,electric or steam• Pre-react heaters - heat water or steam• Insulated process air inlet• Mirror handed• Stainless steel casing• Touch screen display
DH/MEA/PGB/-0110--15/03
Sub
ject
to c
hang
e w
ithou
t not
ice
AUSTRALIATel +61 2 8843 1588
AUSTRIATel +43 1 6164298-0
BELGIUMTel +32 2 240 68 68
BRAZILTel +55 41 3317 5050
CANADATel +1 905 8585894
CHINATel +86 10 804 18000
DENMARKTel +45 4495 3355
FINLANDTel +358 20 776 8230
FRANCETel +33 1 3411 5757
GERMANYTel +49 40-879690-0
INDIATel +91 20 668 18 900
ITALYTel +39 0183 521377
JAPANTel +81 3 5970 0021
KOREATel +82 2 761 8701
MEXICOTel +1 52 722 270-4029
NETHERLANDSTel +31 172 43 32 31
POLANDTel +48 58 305 35 17
SINGAPORETel +65 6744 6828
SOUTH AFRICATel +27 11 997 2000
SPAINTel +34 91 640 09 02
SWEDENTel +46 8-626 6300
SWITZERLANDTel +41 52 3438886
THAILANDTel +66 2 642 2670-3
TURKEYTel +90 262 751 3750
UNIT. ARAB EMIRATESTel +971 4 8809295
UNITED KINGDOMTel +44 1480 432 243
UNITED STATESTel +1 978 241 1100
VIETNAMTel +84 8 825 6838 www.munters.com