Post on 15-Aug-2020
MIG200i New Product
Synergic Double-Pulse MIG Welder
• Synergic MIG welder • 200A Output • Double Pulse feature • Aluminum torch as standard
• Includes 0.045 5554 Aluminum synergic curve – meets OEM requirements
• Meets I-CAR requirements
• Pulse and Double-Pulse MIG technology – Rapidly cycles from low to high
current (100X a second) – Better control of the weld – Ideal for thinner materials (1/32”) – Flattens out the weld bead profile – Larger wire diameters can be used on
thin materials – Lower spatter – Less rework/cleanup – Increased throughput times
Less post weld finishing
Example of an aluminum welded joint using a pulse
MIG
Pulse and Double-Pulse MIG Advantages
Single Pulse waveform Double Pulse waveform
Single Pulse weld
Double Pulse weld
Parameter Selection • Pre-programmed settings
for welding a variety of materials and thicknesses
• Automatically provides the user with the most optimal parameters for each situation
• By adjusting the material thickness, each of the preset parameters are automatically updated
• Includes a synergic curve to weld .045 5554 aluminum wire — a requirement for the Ford F-150 Pickup Truck
Synergic MIG Welder Parameter Selection
*
* MIG225i and MIG185i only
• I-CAR welding certification is held at local shops or schools • Technicians must be certified at the same location where they
are employed • Training with the tools and equipment they utilize for actual repairs
AdditionalTrainingandrequirements
fromI-CAR:https://rts.i-car.com/oem-information/
ford.html
I-CAR Training