MIG200i New Product

Synergic Double-Pulse MIG Welder

• Synergic MIG welder • 200A Output • Double Pulse feature • Aluminum torch as standard

•  Includes 0.045 5554 Aluminum synergic curve – meets OEM requirements

• Meets I-CAR requirements

•  Pulse and Double-Pulse MIG technology – Rapidly cycles from low to high

current (100X a second) – Better control of the weld –  Ideal for thinner materials (1/32”) – Flattens out the weld bead profile – Larger wire diameters can be used on

thin materials – Lower spatter – Less rework/cleanup –  Increased throughput times

Less post weld finishing

Example of an aluminum welded joint using a pulse

MIG

Pulse and Double-Pulse MIG Advantages

Single Pulse waveform Double Pulse waveform

Single Pulse weld

Double Pulse weld

Parameter Selection •  Pre-programmed settings

for welding a variety of materials and thicknesses

•  Automatically provides the user with the most optimal parameters for each situation

•  By adjusting the material thickness, each of the preset parameters are automatically updated

•  Includes a synergic curve to weld .045 5554 aluminum wire — a requirement for the Ford F-150 Pickup Truck

Synergic MIG Welder Parameter Selection

*

* MIG225i and MIG185i only

•  I-CAR welding certification is held at local shops or schools •  Technicians must be certified at the same location where they

are employed •  Training with the tools and equipment they utilize for actual repairs

AdditionalTrainingandrequirements

fromI-CAR:https://rts.i-car.com/oem-information/

ford.html

I-CAR Training