Post on 23-Feb-2016
description
$3.00
4
“The Nation’s Best Read Construction Newspaper… Founded 1957.”
®
MMiiddwweessttEEddiittiioonn
FABCO Celebrates New
Facility...8
Alex Lyon & Son Holds
Ohio Sale...94
CAWGC Meet & Greet
Attracts Nearly 200...12
Inside
May 24, 2014 • Vol. IXX • No.11 • 470 Maryland Drive • Ft. Washington, PA 19034 • 215-885-2900 • Toll Free 800-523-2200 • Fax 215-885-2910
www.constructionequipmentguide.com
Published Nationally
By Dorinda AndersonCEG CORRESPONDENT
A four-year bridge project came to a closewith the implosion of the bridge it replaced andan illumination ceremony.Work began in July of 2008 on a new four-
lane, tied-arch Amelia Earhart MemorialBridge over the Missouri River on U.S.-59between Atchison, Kan., and Winthrop, Mo. Itreplaced a two-lane structure that could nolonger handle today’s traffic needs. The two-
Amelia Earhart MemorialBridge Illuminates The Way
see EARHART page 68
(AP) Indiana and Illinois signedan agreement to build the IllianaExpressway toll road, with Indianapaying $80 million to $110 million,Illinois agreeing to pay at least$250 million, and the rest of the$1.51 billion for the project coming
from private investors.The 33-page document outlines
the responsibilities of each stateand how the 47-mi. (75.6 km)highway will be run. The agree-ment specifically states the roadbetween Interstate 65 near Lowell
in northwest Indiana and I-55 nearWilmington, Ill., 60 mi. (46.5 km)south of Chicago, will be reservedfor vehicles using electronic tolldevices with no option for thosewanting to pay cash. The road willbe a four-lane highway that could
later be expanded to six lanes.The deal also specifies that each
state is responsible for the design,financing, construction and opera-tions of the highway in their state,with Illinois being responsible for
Indiana, Illinois Sign Deal to Build Illiana Road
see ILLIANA page 96
Upon completion of the bridge, lighting contractor Capital Electric presented a 10 to 20minute light show illuminating the new bridge from both sides.
see BRIDGES page 96
Data from a new government report showsthat if all the structurally deficient bridges inthe United States were placed end-to-end, itwould take you 25 hours driving 60 miles perhour to cross them. That’s like driving the1,500 mi. between Boston and Miami. Andit’s a problem that’s close to home.An analysis of the 2013 National Bridge
Inventory database recently released by theU.S. Department of Transportation(USDOT) shows cars, trucks and schoolbuses cross the nation’s more than 63,000structurally compromised bridges 250 mil-lion times every day. The most heavily trav-eled are on the Interstate system.The problem could get a lot worse, the
chief economist of the American Road &Transportation Builders Association(ARTBA) said, as states across the nationface a slowdown in reimbursements foralready approved federal-aid highway proj-ects in August. Without congressional action,Alison Premo Black said there will be noHighway Trust Fund support for any newroad, bridge, or public transportation projectsin any state during FY 2015, which beginsOct. 1. “Letting the Highway Trust Fund invest-
ment dry up would have a devastating impacton bridge repairs,” Black said, noting thetrust fund has supported $89 billion in bridge
Analysis FindsMany Bridges Require Repair
After each blast, crews had 24 hours toremove debris from the Missouri River’snavigation channel and an additional 24hours to remove the remaining debrisfrom the rest of the river channel.
Table of Contents ............4
Truck & Trailer Section........................................35-45
Attachment & PartsSection ......................53-57
Recycling Section ....69-81
Auction Section ........87-97
Business Calendar ........88
Advertisers Index ..........98
Page 2 • May 24, 2014 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
Please Contact Bob Williams or Jeff Speer 11200 W Silver Spring Rd. Milwaukee, WI 53225
800/353-1944 414/461-9100 www.FABCO.comOutside WI & Upper Michigan Within WI & Upper Michigan Hundreds of machines. Listings updated daily.
Cat 725 ..................................................$79,000S/N AFX00708, 6425 Hrs, 13,682 Hrs on Frame,
Tires God, Body Good
2001 Volvo L70D....................................$47,500S/N V18896, 8905 hours, EROPS, bucket,
lug tires good, hyd coupler
2001 Komatsu HD325-6 ....................$137,500s/n 5907, 13,525 hours, EROPS, tires,
body and sheet metal all good
2004 Volvo L60E ..................................$65,000S/N V60363, 3833 hours, EROPS, bucket,
lug tires fair, hyd coupler
2008 Cat 950H ....................................$137,500s/n K5K02145, 10,472 Hrs EROPS, bucket, hyd coupler, cutting edge, 2 valve HL, AC
2006 Cat 966H ....................................$179,500S/N A6G00225, 7775 Hrs, EROPS, A/C, GP-bkt,
tires good, engine rebuilt at 7422 hours
2011 Cat 262C........................................$33,000S/N MST03900, 2295 Hrs, EROPS, A/C,
Hyd Quick Coupler, 2-Speed, Bkt, Tires Fair
2003 Hitachi ZX600LC ........................$110,000S/N 004015, 10,484 Hrs, EROPS, Undercarriage
Fair, Coupler, Bkt
Cat D3G LGP ........................................$65,000S/N BYR01916, 831 Hrs, OROPS, Heat, PAT Blade,
Root Rake, Undercarriage Good
2000 Deere 250C ..................................$47,500S/N 200058, 7815 Hrs, EROPS, Tires Fair,
Bed Good, Sheet Metal Good
Cat D6M LGP........................................$74,500S/N 2RN00542, 10,370 Hrs, EROPS, PAT blade, winch, rear screen, under carriage good
2001 Cat 988G ....................................$152,500S/N 2TW00170, 22,020 Hrs, EROPS, Spade Bkt
w/Teeth, Tires - 2 Good - 2 Fair
1993 Ingersoll Rand ST105 ................$6,500S/N 5137, 5169 hours, no ROPS,
runs good, drums good
Cat 297C XPS ........................................$30,000S/N GCP00782, 5370 Hrs, EROPS, A/C, High Flow, Bkt, 2-Speed, Self-Leveling, Tracks
Good, New Drive Motor at 5365 Hrs
2004 Cat D6RLGP DSII ........................$81,000S/N ADE00479, 11,075 Hrs, EROPS, A/C, S Blade,
Drawbar, Undercarriage On Run Out
2002 Deere 624H ..................................$57,500S/N 582361, 7172 hours, EROPS, bucket,
hyd coupler, tires fair
CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • May 24, 2014 • Page 3
Largest Independent RentalFleet in the Midwest!
Illinois Truck & Equipment 320 Briscoe Drive Morris, Illinois 60450 www.iltruck.comToll Free: (800) 941-2133 Fax: (815) 941-1486 Email: rental@iltruck.com & sales@iltruck.com
Over 1000 unitsavailable for rent!
Including: 125 Hydraulic Excavators
Long Reach Excavators
70 Bulldozers
50 Wheel Loaders
Mantis Cranes 30-100 Ton
35 Articulated Dump Trucks
On/Off Road Water Trucks
• Angle Blades & Winches Available
70
Long Reach Excavators
125
B lld700
Long Reach Excavators
Hydraulic Excavators125Including:
leet in the MidFge Larrgest Independent
Long Reach Excavators
ator ors
leet in the Mid1000er Ovver
est Indep
eswwest!leet in the Mid uni10000
R pendent
est! units
entalR
35
Mantis Cranes 30-100 T
50
70•
Articulated Dump T35
Mantis Cranes 30-100 T
Wheel Loaders500
Bulldozers700 vailableAinches Angle Blades & W Winches
rucksArticulated Dump T
on T Ton
vailable
ble fvailaa
eor r rent!ble f for r
ent!
oll Free: (800) 941-2133 Fax: (815) 941-1486 Email: rental@iltruck.com & sales@iltruck.comTruck & Equipment 320 Briscoe Drive Morris, Illinois 60450 wwwIllinois T
O O
oll Free: (800) 941-2133 Fax: (815) 941-1486 Email: rental@iltruck.com & sales@iltruck.com
ruater T rOn/Off Road W
ruck & Equipment
oll Free: (800) 941-2133 Fax: (815) 941-1486 Email: rental@iltruck.com & sales@iltruck.com
cksuckss
320 Briscoe Drive
oll Free: (800) 941-2133 Fax: (815) 941-1486 Email: rental@iltruck.com & sales@iltruck.comruck & Equipment 320 Briscoe Drive Morris, Illinois 60450 www
oll Free: (800) 941-2133 Fax: (815) 941-1486 Email: rental@iltruck.com & sales@iltruck.com.iltruck.comruck & Equipment 320 Briscoe Drive Morris, Illinois 60450 www
oll Free: (800) 941-2133 Fax: (815) 941-1486 Email: rental@iltruck.com & sales@iltruck.com.iltruck.com
Page 4 • May 24, 2014 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
Construction Equipment Guide Midwest Edition (ISSN 1081-7034) is published bi-weekly by Construction EquipmentGuide Ltd. Advertising and Editorial Offices are located at 470 Maryland Dr., Ft. Washington, PA 19034. Toll Free800/523-2200 or Fax 215/885-2910. Annual Subscription Rate $65.00. Call for Canadian and foreign rates.
Periodicals postage paid at Ft. Washington, PA and at additional mailing offices. POSTMASTER: Send address changes toConstruction Equipment Guide Midwest Edition, 470 Maryland Dr, Ft. Washington, PA 19034.
Contents Copyrighted ©2014, by Construction Equipment Guide, which is a Registered Trademark, registered in the U.S.Patent Office. Registration number 0957323. All rights reserved, nothing may be reprinted or reproduced (includingframing) in whole or part without written permission from the publisher. All editorial material, photographs, drawings,letters, and other material will be treated as unconditionally assigned for publication and copyright purposes and are sub-ject to Construction Equipment Guide's unrestricted right to edit and comment editorially. Contributor articles do not nec-essarily reflect the policy or opinions of this publication.
Call or write for advertising rates, publication schedule and media kit. The Construction Equipment Guide is not responsi-ble for clerical or printer's errors, every care is taken to avoid mistakes. Photographs of equipment used in advertise-ments are not necessarily actual photographs of the specific machine. Similar photographs are used occasionally andevery effort is taken to depict the actual equipment advertised. The right is reserved to reject any advertising.
SPECIAL SECTION69 RECYCLING, CRUSHING AND SCREENINGBe sure to check out this special section! Keep up to date with the latest information on recycling, crushing and screening.
FEATURES8 FABCO HOSTS GRAND OPENING OF EAU CLAIRE,WIS., FACILITYDue to growth in business opportunities, the company has expanded into an allnew 52,000 sq. ft. state-of-the-art facility to serve its customers.
12 NEARLY 200 ATTEND 2014 CAWGC MEET & GREET EXPO The Contractors Association of Will & Grundy Counties held its Meet & GreetExpo on May 1 at the Stone City VFW in Joliet, Ill.
14 CORPORATE PARTNERSHIP ADDS NDSCSEDUCATIONAL PROGRAMThrough this innovative partnership, students will receive state-of-the-art technical training on Komatsu construction equipment and related products.
18 M. ADAMS EQUIPMENT CEO, MARVIN H. ADAMS, PASSESMarvin H. Adams, 84, Rockton, Ill., died on April 19, 2014 at Premier Rehab inBeloit, Wis. A hard working man, he owned and operated M. Adams EquipmentCo. since 1957.
18 NORRIS SALES’S KENNEDY WINS TECHNICIANOF THE YEAR AWARDWarren Kennedy was selected from among employees at approximately 1,200North American dealerships.
20 KIOTI RAISES MORE THAN $25,000 FOR BREAST CANCER KIOTI Tractor, a division of Daedong-USA Inc., kicked off its fourth annualbreast cancer awareness campaign with a special raffle during key industrytradeshows
20 MINNESOTA PROJECT FUNDING DEBATE INFULL SWING BETWEEN HOUSE, SENATEMinnesota House and Senate leaders put forward separate proposals May 5that commit $1.1 billion in public financing for projects ranging from collegebuilding renovations to theater restorations, but they differ on some of thedetails about where limited construction dollars should go.
30 MID COUNTRY MACHINERY CELEBRATES NEWSIOUX CITY FACILITYThe new 15,000 sq. ft. facility in Sioux City, Iowa, is a full service location offeringboth sales and rental.
30 EFFICIENCY PRODUCTION TO HOST MUNICIPALSAFETY DAY MAY 29In conjunction with the Michigan Rural Water Association (MRWA), Michigan CAT,Cherne Industries, Miss Dig and Jack Doheny Company, Efficiency Production Inc.is set to host its 8th Annual Municipal Safety Day on May 29 from 8 a.m. to 4p.m. at Efficiency Production’s corporate headquarters in Mason, Mich.
62 NORTRAX MAKES ORGANIZATIONAL CHANGESMichael Rugeroni has been appointed to vice president of sales and marketing andChris Holmes has been appointed vice president of product support. Tom Bauershas been appointed vice president, southeast region and Scott McGuigan has beenappointed vice president of the mid south region.
64 TEREX FUCHS MATERIAL HANDLERS ASSIST ALLMETALS MARKETTo keep up with increasing material inflow, All Metals Market switched to TerexFuchs MHL350 material handlers, which offer longer reach and improved efficiency compared to the excavators previously used.
94 ALEX LYON & SON HOLDS CONSTRUCTION,RECYCLING, TRUCK SALEMuch of the equipment up for bid was rental equipment made available fromSunbelt Rentals as a part of its process in updating its fleet.
EQUIPMENT35 CATERPILLAR Cat CT681 Vocational Truck
53 NPK PH-Series Hydraulic Hammers
56 JCB Brush Cutters
DEPARTMENTS85 CLASSIFIEDS
87 COMING AUCTIONS
88 BUSINESS CALENDAR
MIDWEST EDITIONCirculated Throughout • North & South Dakota • Nebraska
• Kansas • Minnesota • Iowa • Missouri• Illinois • Wisconsin • Michigan • Indiana • Ohio • Kentucky
Founder, Publisher & CEO Edwin M. McKeon Sr.Midwest Publisher Joseph S. McKeon
Editor In Chief Craig Mongeau Associate Editor Christine Reckner
Editorial Consultant Pete Sigmund Production Mgr. John Pinkerton
Controller Tom WeinmannCirculation Mgr. Cathy Printz
Main office 470 Maryland Drive Fort Washington, PA 19034
215/885-2900 Toll Free 800/523-2200
Fax 215/885-2910Web site www.constructionequipmentguide.com
Editorial e-mail editorial@cegltd.comAdvertising e-mail production@cegltd.com
For advertising rates Contact Joseph S. McKeon• Illinois • Wisconsin • Northwest Indiana• Missouri • Kansas
773/769-4090Toll Free 800/632-0233
Fax 773/769-4280e-mail jmckeon@cegltd.com
Contact Ed Bryden• Central and Eastern Indiana • Michigan • Ohio
• Kentucky
440/268-9690Toll Free 800/810-7640
Fax 440/268-9691e-mail ebryden@cegltd.com
Contact Patrick Kiel • Iowa • Minnesota • Nebraska • North Dakota • South Dakota
952/353-1770Toll Free 866/413-4265
Fax 952/353-2750e-mail pkiel@cegltd.com
Mobile LinkedIn Facebook Twitter YouTube
To r ead t he s e s t o r i e s a nd many mo re , v is i t w w w . co n s t r u ct io nequipment guid e . com
IN THIS ISSUE128 94
¤
CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • May 24, 2014 • Page 5
Cat D4D, ’72 ..............................................$7,000
Cat D6M LGP, ’96, 18,025 hrs ................$44,500
Deere 455G, ’96, 6,864 hrs......................$24,500
Komatsu D39EX-21, 4,530 hrs ................$34,500
Komatsu D51PX-22, ’08, 4,013 hrs ......$124,500
Komatsu D61PX-15EO, ‘07, 4,771 hrs ..$120,000
Komatsu D65EX-15EO, ’07, 3,934 hrs ..$149,500
Komatsu D65PX-15EO, ‘09, 4,203 hrs ..$140,000
Komatsu D155AX-5, ’03, 7,007 hrs ......$184,500
Komatsu D155AX-6, ’07, 6,524 hrs ......$239,500
Komatsu D275AX-5, ’03, 23,015 hrs ......$99,500
Komatsu GD655-3C, ’06, 1,866 hrs ......$159,500
Komatsu GD655-3EO, ’09, 1,287 hrs ....$189,500
CAT 277, ’04, 2,205 hrs............................$22,000
CAT 277, ’04, 2,103 hrs............................$22,000
ASV PT100, ’07, 2,115 hrs ......................$38,500
Atlas Copco ROC F9-11, ’10 ......................$CALL
LeeBoy 8500LD, ’00, 5,434 hrs ..............$17,500LeeBoy 8500LD, ’08, 910 hrs ..................$74,500Vogele 1110WB, ’05, 3,139 hrs ..............$54,500Vogele 1110WB, ’03, 1,004 hrs ..............$85,000Vogele 5103-2, ’11, 1,273 hrs ..............$250,000
Deere 490D/Rolly Head, ’88, 12,000 hrs $39,000Norco Puma 220, ’11, 78 hrs ....................$CALLTimbco 425EXL, ’06, 9,250 hrs..............$170,000Valmet 415EX/Rolly II, ’05, 10,092 hrs $135,000Valmet 840, ’02, 13,000 hrs ....................$60,000Valmet 840.2, ’05, 6,600 hrs......................$CALLValmet 860.4, ’12, 1,640 hrs......................$CALLValmet 911.3, ‘08, 8,655 hrs ................$235,000
Raygo Gator Stabilizer ..............................$9,500Roadtec RX700, ’05, 4,570 hrs ..................$CALLWirtgen W60, ’08, 628 hrs ....................$144,900Wirtgen W60 Rumbler, ’11, 400 hrs......$240,000Wirtgen W600, ’03, 2,403 hrs..................$77,500Wirtgen 2000DC, ’96, 9,346 hrs ..............$70,000Wirtgen W2100, ’04, 8,373 hrs ..................$CALL
Komatsu HD465-5, ’02, 17,763 hrs ............$CALL
Komatsu HD465-5, ’02, 17,763 hrs ............$CALL
Cat 980G, ’98, 26,583 hrs ........................$69,500
Komatsu WA65-3, ’04, 745 hrs................$59,500
Komatsu WA70-5, ‘06, 2,592 hrs ............$47,500
Komatsu WA320-6, ’08, 3961 hrs..........$126,500
Komatsu WA380-6, ’11, 2,094 hrs ........$179,500
Komatsu WA450-6, ’07, 8,069 hrs ........$149,500
Komatsu WA470-6, ‘11, 5,520 hrs ........$179,500
Komatsu WA500-1, ’96, 13,697 hrs ........$34,500
New Holland LW190B, ’04, 5,908 hrs......$33,500
Bomag BW205AD, ’02, 3,520 hrs ............$34,500
Hamm HD8, ’07, 515 hrs ........................$18,500
Hamm HD14VV, ’09, 2,460 hrs ................$29,500
Hamm HD90 Ozzy, ’04, 4,300 hrs ............$54,500
..............................................................................
Concept Products CP2000, ’05 ................$13,500
Doppstadt SM726, ’09, 257 hrs ............$225,000
Cat 330CL, ’02, 12,032 hrs ......................$69,500
Cat 365CL-MH, ‘08, 10,428 hrs ............$164,500
Cat 385CL, ’06, 9,646 hrs ..........................$CALL
Deere 350DLC, ’07, 5,837 hrs ..............$124,500
Hitachi ZX160LC, ’05, 5,876 hrs..............$59,500
Kobelco SK400LC Mark IV, ’97 ................$38,500
Komatsu PC35MR-2, ‘07, 4,747 hrs ........$26,500
Komatsu PC88MR-8, ‘09, 1,195 hrs ........$74,500
Komatsu PC138USLC-8, ’11, 1,142 hrs $124,500
Komatsu PC200LC-6, ’01, 5,824 hrs........$59,500
Komatsu PC200LC-7, ’02, 6,507 hrs........$84,500
Komatsu PC200LC-7, ‘03, 8,114 hrs........$79,500
Komatsu PC200LC-7, ’04, 7,640 Hrs ......$89,500
Komatsu PC200LC-8, ’06, 5,102 hrs......$109,500
Komatsu PC200LC-8, ’06, 4,621 hrs........$97,500
Komatsu PC220LC-8, ’06, 9,084 hrs........$96,500
Komatsu PC220LC-8, ’07, 5,757 hrs......$119,500
Komatsu PC300LC-6, ’99, 16,882 hrs......$39,500
Komatsu PC300LC-7, ’06, 9,430 hrs........$79,500
Komatsu PC300LC-7EO, ’06, 6,320 hrs ..$99,500
Komatsu PC308USLC-3EO, ’07, 4,402 hrs $214,500
Komatsu PC400LC-7, ’04, 10,300 hrs......$99,500
Komatsu PC400LC-7, ’05 8,163 hrs ......$124,500
Komatsu PC600LC-7, ’05, 10,328 hrs....$199,500
Komatsu PC600LC-7, ’05, 4,910 hrs......$369,500
Komatsu PC600LC-8, ’06, 10,478 hrs....$199,500
Komatsu PC650LC-5, ’95, 17,615 hrs......$42,500
Komatsu PC750LC-7, ’04, 6,613 hrs......$349,500
Sennebogen 840M, ’11, NEW ....................$CALL
Volvo EC240CLR, ’11, 454 hrs ..............$195,500
Volvo EC460, ’05, 10,958 hrs ..................$52,500
Komatsu HM300-2, ’06, 6,500 gal ........$275,000
Komatsu HM400-2, ’07, 8,000 gal ........$395,000
EXCAVATORSDOZERS
WHEEL LOADERS
WATER EQUIPMENT
OFF ROAD TRUCKS
MILLINGCOMPACTION
PAVING
FORESTRY
SKID LOADERS
GRADERS
AIR CURTIN DESTRUCTORSROCK DRILLS
15 Roland Branch Locations in IL, IN, MI, MO, and WI
VISIT
ROLAND MACHINERY.COM
Call Jay Germann (217) 789-7711 • Email: jgermann@rolandmachinery.com
Komatsu WA470-6, ’11, 5,520 hrs ........$179,500 Deere 490D/Rolly Head, ’88, 12,000 hrs $39,000
Financing Available for Qualified Buyers
Quality Used Equipment...with support to back it up
Raygo Gator Stabilizer ................................$9,500Vogele 1110WB, ’03, 1,004 hrs ..................................$85,000
Page 6 • May 24, 2014 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
CX130 Excavator
$410/Day, $1,230/Week, $3,690/Month
CX240 Excavator
$700/Day, $2,100/Week, $6,300/Month
CX210 Excavator
$580/Day, $1,740/Week, $5,220/Month
CX460 Excavator
$1,235/Day, $3,705/Week, $11,115/Month
CX160 Excavator
$475/Day, $1,425/Week, $4,275/Month
CX330 Excavator
$875/Day, $2,625/Week, $7,875/Month
CX225 Excavator
$755/ Day, $2,265/Week, $6,795/Month
Excavator Rental Specials
Rent Today!
Clean, reliable equipment Competitive rates Rent by the day, week, or month Delivered to your job site
McCannOnline.com
IllinoisAddison
630-627-0000
Bolingbrook*630-739-7770
Chicago312-942-9200
Crestwood708-597-3110
McHenry*815-385-0420
Wauconda847-526-9444
IndianaSchererville*219-865-6545
* Case authorized dealer location
Serving the Constructor ®
Mark Kruepke • (630) 739-7770Bolingbrook, IL
Contact us at Used@McCannOnline.com
View our complete Used & “Like New” inventoryat McCannOnline.com
McCann Rents a full line of heavy and light constructionequipment. Call us today to supply your next rental.
2012 Case SV185, s/nJAFSV185CBM443612, 350 Hours, Cabw/Heat, Two Speed, 72 inch Bucket, 12 x16.5 Tires ........................................$31,500
2007 Case 450, s/n N7M446035,2250Hours, Rops, Aux Hyds, 72 inch bucket, 12 x16.5 Tires ........................................$22,900
2012 Case SR150, s/nJAFSR150JCM42107,184 Hours, Cabw/Heat, 1 Speed, Manual Coupler, 66” Bkt,10x16.5 Tires ..................................$28,000
2004 Case 60XT, s/n JAF0369233, 2050Hours, Rops, High Flow ( 5 Line), 12 X16.5Tires, 72 inch Bkt ............................$15,000
1998 Case 1840, s/n JAF0221937, 2800Hours, Rops, Aux Hyds, 60 inch bucket, 10x 16.5 Tires ....................................$10,500
2012 Case 850L, s/n NCD80092, 700 Hours,Cab w/Heat and AC, 124” Blade, 24”Grousers ......................................$120,000
2010 RoadHog, s/n 0904008RH40140TLT,150 Hours, 40” Cut,30” Side shift, Tilt,Water, 140Hp Deere ........................$88,000
2011 580SN, Cab w/Heat & Ac, Extenda-hoe,Ride Control, Two Lever, 4 in 1 Bucket. AuxHyds, 12”,18” and 24” Bkts ............$64,750
STARE Q U I P M E N T
LT D .
Call Sales 515-283-2215 • 800-352-54011401 2nd Ave • Des Moines, IA 50314
�CONSTRUCTION EQUIPMENT & SUPPLIESSINCE 1968
CHECK OUT OUR WEBSITE: www.starequip.comDes Moines • Ames • Cedar Rapids • Waterloo
2012 Bobcat T650 Track Loader2 Units Available, 1800 Hrs, 74hp Kubota dieselengine, equipped with cab, heat/ac, fast attach, 2 speed, new sprockets, selectable joystick..........................................................................................$39,995
Skidsteers in Stock
Coneqtec Universal SC21 StumpGrinder SC SeriesFor Sale or Rent ......................Call for Pricing
Since 1985!
CALL JENNIFER TODAY!(888) 288-1052jennifer@RBusedParts.com
www.RBusedParts.com
NEW, USED & REMAN PARTS• Undercarriage• Arms & Booms• Cylinders• Valves• Transmissions• Pumps• Engines• and More!
CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • May 24, 2014 • Page 7
Contact Marty in Illinois1-800-307-0221
mahrendt@finkbinerequipment.com
Photos & Detail Descriptions view:
www.finkbinerequipment.com
CEDAR RAPIDS CR662RM - ‘10 • Mat. Transfer Vehicle w/ Hopper Insert, 1497 hrs, THRU SHOP,CURRENT UPDATES ADDED ............................................................................................$239,878LEEBOY 8500T - ‘02 • 2,489 Hours, machine ready to work, #C000341 ..........................$33,456MAULDIN 690G - ‘13 • 38 Hours, Gravity Feed ........................................................Call for PriceMAULDIN 1500 - ‘03 • Track, Conveyor Fed, 8’-13’ Screed, 844 Hrs ................................$27,950MIDLAND SPR6 - ‘13 • 125 Hours, take a look at this its ready for work right hand discharge,#C000340........................................................................................................................$101,095MIDLAND SPD8 - ‘12 • #61979A, 296 Hrs, wow another ready for work........................$139,950NEAL CART PATH PAVER - ‘08 • 5’-8’, Screed Conv Feed, 629 Hrs ..................................$32,500
CALL items may be on rent causing pricing and hours to vary.
WIRTGEN W50DC - ‘13 • 20” Cut, Deep Cut Machine, 3 Wheel, Rear Discharge Mill, 73 Hrs ..$214,950
IR DD118HFA - ‘05, 4968 hrs, #181553............................................................................$29,500SAKAI R2H-2 - 3 Wheel Static Rollers, 83”, 12’ w/388 hrs, 1R5-60251 ..........................$89,000SAKAI R2H-2 - ‘13, 3 Wheel Static, 90 hrs, #C000223, 1R5-60309 ................................$98,950SAKAI R2H-2 - ‘13, 3 Wheel Static, 30 hrs, #C000252, 1R5-60312 ..............................$102,950SAKAI SW800II - ‘12 • 67” Double Drum Vibratory Rollers, w/220 hrs ............................$89,360SAKAI SW850-2 - 79” Double Drum Vibratory Rollers, *2011 w/211 hrs ........................$89,500SAKAI SW880 - 79” Double Drum Vibratory Roller, *2012 w/292 hours........................$113,980SAKAI SW652 - 57” Double Drum Vibratory Roller, *2012 w/216 hrs ....................Call for PriceSAKAI SW300 - 40” Double Drum Vibratory Roller, 2013 w/55 hrs..................................$32,978SAKAI SW502 - ‘13, 233 Hours, 51 inch drum 9000 lb remaining std and or eptw warranty,#C000212..........................................................................................................................$40,974
*Comes with any remaining standard and 3 year extended power train warranty.
GRADALL 660E - S/N 016345............................................................................................$12,000GRADALL XL 4100 - S/N 0411552, 7631 HRS, #C000402 ................................................$28,385GRADALL XL4100 - ‘94 • C386, S/N 414218, working as is..............................................$19,500GRADALL XL4100 - ‘98 • Workable, As-Is ........................................................................$25,000GRADALL XL4100 - ‘02 • 7068 Hours, Call on this one ....................................................$63,950LIEBHERR A904C - ‘11, 1435 Hrs, No Buckets w/Machine, Many Buckets in Stock for This ................................................................................................................................................$156,950
MILLING MACHINES
ROLLERS
PAVERS / ROAD WIDENERS
EXCAVATORS
Milwaukee, WI1-800-236-6900Fax 414-541-1892
Wausau, WI1-800-242-7113Fax 715-675-9748
Crushing & Screening Div.Little Chute, WI1-800-236-8318Fax 920-788-6753
YOUR AUTHORIZED DEALER
in WISCONSIN and UPPER MICHIGAN for:
For information on our in-stock equipment, contact Lanny Peterson at:lpeterson@amstate.com or
mobile 1-715-574-8089 or 1-800-242-7113
AGGREGATE EQUIPMENTALLIS RT2448 PORTABLE JAW PLANT, 1993, with 24”x48” Jaw, 48”x20’ Vibrating Grizzly Feeder, Front DischargeConveyor, Six Hydraulic Legs, Tri-Axle Chassis, Cummins NT855 Diesel with Hydraulic Drives for Feeder & Conveyor............................................................................................................................................................................$185,000JCI K-300 “KODIAK” PORTABLE CONE PLANT, 300 hp electric motor, 36”x 20’ side discharge conveyor, 36”x 35’feed conveyor, motor control panel, hydraulic leveling......................................................................................$375,000POWERSCREEN 510 COMMANDER RINSER SCREEN PLANT, 11.8 Yd. hopper with hydraulic dump grizzly, 36” feedconveyor, 5x10 3-Deck screen, tandem axle, Deutz diesel ..................................................................................$52,400
EXCAVATORSDEMAG H95 MASS EXCAVATOR, Powered by a Cat 3408 Diesel, with a 24’7” Gooseneck Boom, and a 10’8”Stick with 43’6” Reach and 25’ Digging Depth, 7.2 cu yd HD Rock Bucket, Approx. 220,000 Lb. Working Weight,5800 Frame Hours and Recent Engine Rebuild........................................................................................$95,000LIEBHERR R974B HDSL UTILITY CRAWLER EXCAVATOR, Powered by a 471 HP Liebherr D9408TI Diesel,33’11” Semi-Gooseneck Boom with 15’5” Stick, 5 cu yd HD Bkt, 21’x14’ 4” Wide U/C with 30” Track Pads adnRemovable Sideframes, Approx. 190,000 Lb. Working Weight ....................................................................CALL
CRANESGROVE RT760 60 TON CAPACITY ROUGH TERRAIN CRANE, 1993, with Cat Diesel, 110’ Power-Pinned Boom,32’ Swingaway, Main & Auxiliary Hoists, 29.5x25 Tires, Ready to work ..............................................$124,500GROVE TM9120 100 TON TRUCK CRANE, 1997, 42’ to 130’ boom, 33’ to 58’ offsettable telescopic swingaway,Grove HO50 main & aux. hoists, LMI, Cummins 6CT8.3 diesel, mounted on a Grove 8 x 4 chassis with aCummins N14 diesel and Roadranger transmissions. Tandem boom dolly ....................REDUCED TO $335,000GROVE RT855B 55 TON ROUGH TERRAIN CRANE, 1995, with Cummins diesel, 37’ to 115’ boom, 35’ to 60’swingaway, LMI, Grove model HO30 main & aux. hoists, 29.5x25 tires ..............................................$159,500LIEBHERR HS883HD DUTY CYCLE HYDRAULIC CRAWLER CRANE, 132 Ton Class, (2 Available) with LiebherrV8 Diesels, Main Hoists with 44,000 SLP or 66,000 SLP, 115’ Main Boom, Removable Sideframes ..........CALL
GROVE HYDRAULIC CRANES • PETTIBONE EXTENDO LIFTS and CARRY LIFTS
• LIEBHERR EXCAVATORS, MATERIAL HANDLERS, CRAWLERCRANES and HYDROSTATIC WHEEL LOADERS • GOMACO PAVERS • KOLBERG/PIONEER/
JCI AGGREGATE EQUIPMENT • SANDVIK and HAZEMAGCRUSHERS • MANITOWOC CRANES
GROVE RT760 ROUGH TERRAIN CRANEGROVE TM9120 TRUCK CRANE
Large Selection of New & Used Equipment in Stock.
View us at:www.amstate.com
Page 8 • May 24, 2014 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
FABCO Hosts Grand Opening of Eau Claire, Wis., Facility
Allen Krause of Fremont, Wis., looks over the undercarriage of this CatD6KII LGP.
James Colvard (L) of Chetek,Wis., and Art Harelstad ofDovre, Wis., check out the cab ofthis Cat 924K wheel loader.
Rich Ogren of Johnson Timber infront of the Cat MH3037 materialhandler.
FABCO Equipment President and CEO Jere Fabick cuts the ribbon.
(L-R): Enjoying the grand open celebration areAdam Patrow, FABCO; Terry Pecha, A-1Excavating; and John Quillico, FABCO.
Pat Lavery, Caterpillar district manager,speaks to customers at the Eau Clairegrand opening.
David Voss Jr. (L), president and CEO of Miron Construction Co. Inc.,presents Jere Fabick president and CEO, FABCO Equipment, with agranite rendering of the new Eau Claire, Wis., facility.
(L-R): Getting set for a tour of thenew building are Mubeen Khan,Caterpillar; Tom Scalzo, FABCO; EdMoss, Fred Weber Inc.; TerryHennessey, Fabick CAT; and DougFabick, president of Fabick CAT.
FABCO hosted its grandopening and season openerfor its Eau Claire, Wis., loca-
tion on April 25 and 26.Due to growth in business
opportunities, the company hasexpanded into an all new 52,000sq. ft. state-of-the-art facility toserve its customers.
The event featured food, fun,
refreshments, door prizes andfacility tours. The new facility islocated at 7860 Partridge Rd., EauClaire, Wis. For more information,call 715/874-5100.
(This story also can be found onConstruction Equipment Guide’sWeb site at www.construc-tionequipmentguide.com.) CEG
see FABCO page 52
CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • May 24, 2014 • Page 9
ALEX E. PARIS CONTRACTING COMPANY, INC.Route 18 - Atlasburg (Pittsburgh), PA 15004
724/947-2235 Day/Night Fax 724/947-3820Call Andy Miller Established 1928
Our Greatest Assets .. Our Employees
Cat IT28G, 1998, EROPS, coupler, 3rd valve, 20.5 x 25rubber, 15K hours, work ready . . . . . . . . . . . .$42,500Komatsu WA500-1, 1992, EROPS, w/ A/C, high-reach, 6.5 cy GP bkt, 29.5x25 . . . . . . . .$79,500John Deere 624G, 1996, EROPS, quick coupler, GPbkt, 20.5x25 tires . . . . . . . . . . . . . . . . . . . . . .$46,000Volvo L60E, 2005, EROPS, coupler, aux hyd, boomsusp, 20.5R25, v. good . . . . . . . . . . . . . . . . . .$89,500
IR SD100D Pro-Pac Vibratory Compactor, 1999,Hydrostatic trans 84" smooth drum, drum drive . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$52,500IR SD105DX, 2002, 84" drum drive, OROPS, very clean . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$74,500IR SD105DX, 2002, 84" drum, OROPS, clean $69,500IR SD150F, 84" Padfoot, 1998, OROPS . . . . .$49,500IR SD100D, 1996, Pro-Pac, 84" smooth w/pad kit,ROPS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$62,500Cat 815B, 1993, OROPS, S-Blade w/Tilt, Good Feet . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$68,000Cat 815F, 1998, EROPS, w/ A/C, s-tilt, good feet, verynice . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$205,000(4) Cat 825C’s, 1981-1990, EROPS, S-blade w/tilt, allwork ready . . . . . . . . . . . . . . . . . . . . . .From $79,500Multiquip MR8G Walk Behind Vibratory Compactor,1997, Briggs & Stratton 8 HP gas engine . . . . .$2,500Rammax Walk Behind Rollers, over 25 in stock, lever& remote . . . . . . . . . . . . . . . . . . . .$4,000 to $10,000(8) Sheepsfoot, 48" and 60", double drum & singledrum, tow type . . . . . . . . . . . . . . . . . .$4,000 - $6,500
Case/IH 485 Utility Tractor, 1986, Case 3 cyl dslengine, 55 gal water tank . . . . . . . . . . . . . . . .$10,500Case/IH 385 Utility Tractor, 1987, 3 cyl dsl engine, 72"hydraulic broom . . . . . . . . . . . . . . . . . . . . . . .$11,500Rome TRCH16 Disc, hyd offset disc, 16 ea 32” dia, Hydangle tongue, scrapers, 2” axles . . . . . . . . . . . .$9,500
Cat 953LGP, 1984, OROPS, 20 DBG, GP Bkt .$37,500Cat 963, 1983, OROPS, 2.6 cy GP bkt, 17” DBG pads . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$46,000
Volvo A40, 1998, 40 tons, 10991 hrs, 395 hp, 8WD,29.5R25, A/C, 29 cy cap. sideboards, tailgate (current-ly off work), work ready . . . . . . . . . . . . . . . .$127,500Volvo A40, 1996, 40 tons, 395 hp, 6WD, A/C, 29.5R25,working everyday . . . . . . . . . . . . . . . . . . . . .$145,000Volvo A40, 1996, 40 tons, 11,000 hrs, 6WD, 20.5R25,A/C, P/S trans, 29 cy cap., 6/06 hitch rebuilt $115,000Volvo A40, 1995, 40 tons, 395 hp, 8WD, 29.5R25, A/C,P/S trans, tailgate, work ready . . . . . . . . . . .$115,000Volvo A35C, 1998, 35 tons, 6WD, 26.5R25 tires,approx 7,000 hrs, good condition . . . . . . . .$147,500Volvo A35, 1995, 35 tons, 326 hp, 6WD, 26.5x25, A/C,P/S trans, working everyday on jobsites . . . . .$87,500Volvo A35, 1995, 35 tons, 326 hp, 6WD, 26.5R25, A/C,P/S trans, 26 cy, working everyday on jobsites . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$89,000Volvo A30C, 1996, 30 tons, 11,000 hrs, 296 hp, 6WD,23.5R25, 21 cy cap, A/C, P/S trans, works everyday . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$122,500
(2) Cat D6TXW, 2008, ROPS w/sweeps, a-blade,winches, v. good . . . . . . . . . . . . . . . . . .$175,000 Ea.Cat D8N, 1991, ROPS, drawbar, S-U blade . .$85,000(2) JD 450G, 1996, wide tracks, ROPS, PAT blade . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$39,000 Ea.
Broderson IC80-2E, 1997, 8.5 ton, 24’ boom, dual fuel,10.00R15 tires, 3,400 hrs . . . . . . . . . . . . . . . .$21,500Grove RT58C, 1981, down cab, 18 ton r.t., 70' boomanti-two block, GM dsl, clean . . . . . . . . . . . . .$49,500
Cat 613C Water Wagon, 1994, 5000 gal drop tank,ROPS, spray heads . . . . . . . . . . . . . . . . . . . . .$49,500Cat 621F, 1996, Scraper, OROPS, 33.25x2, very goodcondition . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .CALLCat 621E, 1989, Scraper, OROPS, 33.25x29, very nice
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .CALL
JD 490E, 1994, 9'11" stick, Aux. hydraulics, quick cou-pler, 6-7000 hrs, Fleet maintained . . . . . . . . .$29,000Gradall-Hopto 300, 1968, G.M. diesel UP, on rubber,operational . . . . . . . . . . . . . . . . . . . . .$10,500/OFFER
Komatsu PC200 LC-6, 1996, 32" pads, 42" Bkt, longstick . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$39,500Komatsu PC200 LC-6, 1996, 24" pads, 9'7" stick, 44"Bkt . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$43,500Komatsu PC150 LC-6K, 1998, 8'7" stick, 30" bkt, 27.6"TBG pads, work ready . . . . . . . . . . . . . . . . . . .$57,000(5) Komatsu PC128UU, 1996, offset boom, rubber tracks, low hrs . . . . . . . . . . . . . . . . . . . . .CALLKomatsu PC160 LC-7KA, 2004, 24” TBG pads, JRBcoupler, plumbed, 8’6” width, nice, work ready . .CALLVolvo EC460B LC, 2003, 4600 hrs, 23’ boom, 11’ stick,5.12 cy bkt, 22,000# ctwt, hammer/shear plumbingvery good condition . . . . . . . . . . . . . . . . . . .$159,000
(2) 48' Box Vans w/Liftgates, Good Condition . .CALL
IR 185’s, JD diesels . . . . . . . . . . . . . . . . . . . . . .CALL
(12) Allmand Light Plants, 2008-2010, diesel, s/a tow-type, (4) MH lights, excellent . . . . . . . . .From $5,200
Case 580L Rubber Tire Loader Backhoe, 1997,OROPS, std stick, 24" bkt . . . . . . . . . . . . . . . .$24,500
John Henry Drill Mtd on Cat 320N, 1994, 24' mast,Duraquip dust collection . . . . . . . . . . . . . . . .$150,000
(2) Balderson Broom Attachment for Cat IT Machines,8' wide, good condition . . . . . . . . . . . . . . .$4,000 Ea.
BUCKETSPC1000, 84" Digging Bucket . . . . . . . . . . . . . .$9,500Over 100 Excavator, Loader, Specialized & Grapple
Buckets in Stock-Call For Your Needs
FORKS(8) IT28F/G Forks, Balderson qc, 48"-60" pallet style,excellent . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$4,000
Others Available CallPrices Are Negotiable - At Your Inspection
All Equipment is Owned & Operated By ALEX E. PARIS CONTRACTING CO., INC.
TRUCKS & TRAILERS
CRAWLER LOADERS
OFF ROAD HAULERS
MOTOR SCRAPERS
DRILLS
ATTACHMENTS
MISCELLANEOUS
WHEEL LOADERS
HYDRAULIC EXCAVATORS
CRAWLER TRACTORS
COMPACTORS
LANDSCAPING
CRANES
SPECIALS
BACKHOES
AIR COMPRESSORS
Page 10 • May 24, 2014 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
Volvo Construction Equipment
USED EQUIPMENT
North Dakota: Bismarck
FargoMinot
North Carolina: CharlotteRaleigh
AshevilleGreenville
South Carolina: Columbia
North CharlestonPiedmont
Georgia: Buford
Forest ParkSavannah
Tennessee: Knoxville
Chattanooga
Your VOLVO dealer inThe Carolinas • Georgia • East Tennessee • North Dakota
www.ascvolvo.com
Doug Wilson 704-562-2032 Email: doug.wilson@ascvolvo.com
Billy Brice 678-318-9500Email: billy.brice@ascvolvo.com
Asphalt/Pavers/Concrete Equipment2012 VOLVO PF2181, 1070 Hrs ..................................$261,500
(2) 2007 VOLVO PF6110, 2809-3061 Hrs ..................$166,700 Ea.
2011 VOLVO PF6110, 1879 Hrs ..................................$206,000
2006 VOLVO PF6110, 2866 Hrs ..................................$166,700
2008 VOLVO PF6110, 3258 Hrs ..................................$166,700
2007 VOLVO PF6170, 1451 Hrs ..................................$205,600
Compactors-Smooth Drum2010 VOLVO DD112HF, 1664 Hrs ..................................$88,900
2008 VOLVO DD118HF, 1876 Hrs ..................................$83,500
2007 VOLVO DD90HF, 1748 Hrs ....................................$58,500
2010 VOLVO DD90HF, 445 Hrs ....................................$100,000
2012 VOLVO SD116DX, 1500 Hrs ................................$116,700
Excavators-Crawler2011 VOLVO EC210CL, 3246 Hrs..................................$138,900
2013 VOLVO EC220DL, 1557 Hrs ................................$150,000
2011 VOLVO EC240C LC, 2766 Hrs ..............................$155,600
2011 VOLVO EC250DL, 2601 Hrs ................................$166,700
2012 VOLVO EC250DL, 3204 Hrs ................................$156,000
(3) 2011 VOLVO EC340DL, 1635-3851 Hrs..........$177,800-$217,000
(3) 2012 VOLVO EC340DL, 2095-2322 Hrs ..........$205,600$211,200
2013 VOLVO EC340DL, 1756 Hrs ................................$214,000
2011 VOLVO EC460C LC, 4379 Hrs ..............................$250,000
2013 VOLVO EC480DL, 1500 Hrs ................................$330,000
2011 VOLVO EC480DL, 3677 Hrs ................................$327,800
Excavators-Mini (up to 12,000 lbs)2004 VOLVO EC55, 6032 Hrs........................................$33,500
2008 VOLVO EC55B, 4265 Hrs ......................................$38,000
Excavators-Wheel(2) 2011 VOLVO EW180C, 2576-2770 Hrs ..........$161,200-$166,700
2012 VOLVO EW180D, 1617 Hrs ..................................$194,500
Motor Graders2009 VOLVO G930, 3853 Hrs ............................SOLD $122,500
2011 VOLVO G946B, 1957 Hrs ....................................$211,200
Off-Highway Trucks2004 VOLVO A25D, 5737 Hrs ......................................$211,200
2010 VOLVO A25F, 3284 Hrs ......................................$244,500
(5) 2012 VOLVO A25F, 1873-2527 Hrs ..............$283,400-$288,900
2013 VOLVO A25F, 2023 Hrs ......................................$289,000
2006 VOLVO A30D, 4714 Hrs ............................SOLD $177,800
(2) 2006 VOLVO A30D, 6385-11027 Hrs ..............$94,500-$166,700
2008 VOLVO A30E, 7663 Hrs ......................................$155,600
2011 VOLVO A30F, 3335 Hrs ......................................$372,500
(4) 2012 VOLVO A30F, 1422-2633 Hrs ..............$322,500-$335,500
(2) 2007 VOLVO A35D, 7542-7611 Hrs............SOLD $211,500 Ea.
2008 VOLVO A35E, 5432 Hrs ......................................$238,900
2012 VOLVO A35F, 2614 Hrs ......................................$415,000
(2) 2010 VOLVO A40E, 2405-2817 Hrs ..............$345,745-$372,500
(2) 2011 VOLVO A40E, 4531-4533 Hrs ......................$316,700 Ea.
(8) 2011 VOLVO A40F, 2789-6566 Hrs ..............$322,300-$399,000
(16) 2012 VOLVO A40F, 1697-4460 Hrs ............$346,000-$447,000
(2) 2013 VOLVO A40F, 2492-2830 Hrs ..............$394,000-$420,300
Wheel Loaders2010 VOLVO L110F, 5170 Hrs ....................................$155,600
2011 VOLVO L110F, 6600 Hrs ....................................$155,600
2008 VOLVO L110F, 8055 Hrs ....................................$128,000
(2) 2012 VOLVO L110G, 2618-2653 Hrs ............$222,300-$222,500
2009 VOLVO L120F, 6893 Hrs ....................................$155,600
2005 VOLVO L150E, 20742 Hrs ....................................$72,500
(3) 2010 VOLVO L150F, 8825-11463 Hrs ............$133,400-$133,500
2009 VOLVO L150F, 6211 Hrs ....................................$183,400
2012 VOLVO L150G, 2723 Hrs ....................................$267,000
2011 VOLVO L180G, 2443 Hrs ....................................$278,000
2012 VOLVO L180G, 3303 Hrs ....................................$277,800
2012 VOLVO L220G, 1609 Hrs ....................................$300,000
2003 VOLVO L50D, 7865 Hrs........................................$52,000
2005 VOLVO L50E, 4752 Hrs ........................................$61,000
2011 VOLVO L50F, 6185 Hrs ........................................$61,200
2010 VOLVO L50F, 7630 Hrs ........................................$55,600
2013 VOLVO L50GS, 1614 Hrs ....................................$123,000
2005 VOLVO L60E, 17059 Hrs ......................................$33,500
2011 VOLVO L60F, 2064 Hrs ......................................$122,500
2012 VOLVO L70G, 2534 Hrs ......................................$144,500
(2) 2012 VOLVO L90G, 1877-3293 Hrs ..............$155,600-$194,500
2012 VOLVO L90G
CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • May 24, 2014 • Page 11
Bismarck701-250-4882
Fargo701-271-2360
Minot701-250-4882
Buford678-318-9500
Forest Park770-319-0074
Savannah912-964-8079
Asheville828-687-0620
Charlotte704-596-8283
Greenville252-754-5280
Raleigh919-661-8710
Charleston843-414-1120
Columbia803-791-0740
Piedmont864-704-1060
Chattanooga423-308-7940
Knoxville865-525-1845
NORTH DAKOTA GEORGIA NORTH CAROLINA SOUTH CAROLINA TENNESSEE
Join our team today. Call 701.250.4882
ascvolvo.com
YOU LOAD IN TWO PASSES, NOT THREE. THAT’S EFFICIENT.
Smart Works.
Volvo Construction Equipment
Page 12 • May 24, 2014 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
The Contractors Association ofWill & Grundy Counties held itsMeet & Greet Expo on May 1 at
the Stone City VFW in Joliet, Ill. Onceagain nearly 200 people attended theexpo.Attendees walked around and visited
the 30 various vendors’ booths whileenjoying the refreshments included inthe admission fee. Bob Baish, BaishExcavating and his cooking crew pre-pared delicious shrimp, beef, chickenand pork kabob’s on the grills. Theexpo committee and the VFW preparedthe rest of the food. Although therewere vendors both inside and outside,the weather did not cooperate and mostvisitors stayed indoors.Attendees had the opportunity to
participate in a myriad of raffles. Thewinner of the CAWGC free ExhibitorBingo drawing was Joe Tiffany,Midwest Access Solutions, who wenthome with a $500 iPad. Two CAWGCmember companies held raffles with100 percent of their proceeds going tothe Joliet Area Hospice. Rod BakerFord donated $400 worth of services atthe dealership and the winner of thatdrawing was Dan Byrnes,Underground Pipe & Valve. George’sLandscaping held a drawing also for abeautiful floral planter and the winnerof that drawing was Barb VanHerwaarden, Hastings Mutual. Theproceeds from the CAWGC 50/50 raf-fle also went to the Joliet Area Hospice.The winner of that raffle was RichStott, Stott Contracting, who won morethan $300. Numerous exhibitors alsoheld drawings.The expo committee consisted of
Chair Lori DuPree, DuPreeConstruction; Dan Byrnes,Underground Pipe & Valve; ChristinaHrebic, Gnade Insurance; NickJohnson, Lyman & Nielsen LLC; NickStipanovich, Illinois Truck &Equipment; Sharon Nicholson, BaishExcavating; and Mary Metz from theContractors Association. This is one ofthe Association’s great networkingevents and keeps growing every year,according to the association.
(This story also can be found on
Construction Equipment Guide’s Web site at
www.constructionequipmentguide.com.) CEG
see CAWGC page 34
Nearly 200 Attend 2014 CAWGC Meet & Greet Expo
Enjoying the 2014 CAWGC Meet & Greet Expo are BobSchmaltz (L) and Chuck of EJ.
(L-R): Jim Tacchia, McCann Industries, and Scott Ross of MaxUSA, do a demo for Dan Saxen on the Max USA products.
(L-R): Ricky Bertaut of FCL Builders, stops by the OzingaMaterials table to see Pat Birmingham and Jay Boban, both ofOzinga Materials.
Paul Izral (L), Ray EdwardsConstructing, catches up with VinceBlecha of Ritchie Bros. Auctioneers.
(L-R): Bob Loula, vice president of salesand rentals of Atlas Bobcat with CalDamron, Mike Bukowski and MarkPinelli, all sales representatives of AtlasBobcat.
United Rentals representatives Joe Sleyko and Greg Tallaricocatch up during the CAWGC Meet & Greet Expo.
CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • May 24, 2014 • Page 13
T O U G H W O R L D . T O U G H E Q U I P M E N T.www.liugongna.com
Rugged terrain, extreme climates, remote locations.
LiuGong machines are developed to excel in the
toughest conditions which makes them your true
reputation builders.
WE NOT ONLY GO TO EXTREMES, IT’S
WHERE WE DO OUR BEST WORK.
W T O EXTREMES, E
W E N O T E X XT R E
T O N LY G
E M E S LY G LY G
Y G GOIT’S
LiuGong machines ar
eme climates, rRugged terrain, extr
e developed to excel in the LiuGong machines ar
emote locations. eme climates, r
T O EXTREMES, E
O e developed to excel in the
emote locations. O
E XT T R E
W H E O U R B E BE OUR
E M E S ,
R E W E E S T W OEST WO
, ,
IT’S E DO O R K . ORK.
.liugongna.comwwwT O U G H W O R L D . T O U G H E Q U I P M E N T
.eputation buildersr
toughest conditions which makes them your true
LiuGong machines ar
.liugongna.comT O U G H W O R L D . T O U G H E Q U I P M E N T
toughest conditions which makes them your true
e developed to excel in the LiuGong machines ar
.T O U G H W O R L D . T O U G H E Q U I P M E N T
toughest conditions which makes them your true
e developed to excel in the OUR
BEST WORK.OUR
BEST WORK.
BEST WORK.
Page 14 • May 24, 2014 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
Corporate Partnership Adds NDSCS Educational ProgramRepresentatives of North
Dakota State College of Science(NDSCS), Komatsu AmericaCorp., General Equipment &Supplies Inc. and Road Machinery& Supplies Co. recentlyannounced an educational partner-ship resulting in the addition of aDiesel Technology — Komatsuprogram to the NDSCS DieselTechnology department.Through this innovative partner-
ship, students will receive state-of-the-art technical training onKomatsu construction equipmentand related products. A combina-tion of classroom instruction,hands-on laboratory instructionand cooperative educational workexperience at participatingKomatsu dealerships, like GeneralEquipment & Supplies Inc. andRoad Machinery & Supplies Co.,will provide students with exten-sive experience servicing Komatsuequipment.“We are pleased to add Komatsu
to our reputable list of partners andvalue their contributions to thisprogram,” said Dr. John Richman,NDSCS president. “With therecent completion of our $10.3million diesel educational facilityexpansion, the time is right to addthis highly technical DieselTechnology — Komatsu pro-gram.”The Diesel Technology —
Komatsu program will be taught inBisek Hall located in Wahpeton,
N.D., beginning August 2014.Graduates of the program will earnan associate in applied sciencedegree (A.A.S.) designed to devel-op technically competent, profes-sional service technicians.“NDSCS has been pivotal in
making this partnership happen,”said Don Shilling, president ofGeneral Equipment & Supplies.“The need for highly educateddiesel technicians continues togrow. In fact, we could easily hirea dozen technicians right nowthroughout our locations in NorthDakota, Minnesota and SouthDakota.”Through scholarship assistance,
program costs associated withtuition, fees and supplies may bereimbursed up to 90 percentdepending on a student’s gradePoint Average (GPA).“We are excited to have our first
batch of students starting atGeneral Equipment & SuppliesInc. to officially launch this pro-gram,” said Shilling. “We antici-pate even more interest as ourrecruiters visit high schoolsthroughout the region to shareabout this high-tech program.”For more information, visit
www.ndscs.edu/komatsu or callEnrollment Services in Wahpetonat 1/800/342-4325.
(This story also can be found on
Construction Equipment Guide’s
Web site at www.constructionequip-
mentguide.com.)
Representatives from North Dakota State College ofScience (NDSCS), Komatsu America Corp., GeneralEquipment & Supplies Inc. and Road Machinery &Supplies Co. recently announced an educationalpartnership resulting in the addition of a DieselTechnology — Komatsu program to the NDSCSDiesel Technology department.
A combination of classroom instruction, hands-on laboratory instructionand cooperative educational work experience at participating Komatsudealerships, like General Equipment & Supplies Inc. and Road Machinery& Supplies Co., will provide students with extensive experience servicingKomatsu equipment.
(L-R): Sarah Hoffbeck, content marketingspecialist of NDSCS; Barb Spaeth, BaumNDSCS; Janess Sveet, communications manag-er, NDSCS; and Tammy Fogle, NDSCS.
Dave Johnson (L), RMS CFO of Savage, Minn.,and Terry Marohl, Diesel Technology depart-ment chair of NDSCS.
CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • May 24, 2014 • Page 15
JD 2112C Scraper Pan,#U12244 ..........$79,000
JD 600CLC w/ GenesisGXP1200R Shear,#U10798 ........$468,000
NPK Hammers, AllSizes for All Makes.Inspected and WellMaintained, GH4-GH18
JD 210CW, 2 PieceBoom, Aux Hyd,#U11722 ........$148,000
JD 9530, Auto Load,1045 hours, Warranty,#U11750 ........$269,000
Case STX550 ScraperTractor, #U12066................................$254,000
JD 350DLC, 10’6" Arm,32" Pads, #U12202 ............................$185,000
JD 824K, 6 yd Bkt,#N5289 ..........$225,000
JD 350GLC MaterialHandler, #N5539 ................................$525,000
JD 850K LGP, 36"Pads, 168" PAT Blade,460 hours, #U11976............................$345,000
JD 850K, 24" Pads,128" Blade, 1494 hours,#U11857 ........$268,000
Fiat HD21, Side Boom,Excellent Condition, 3 Available $83,500 Ea.
JD 400D, New KLEIN8000 gallon water truck,6457 hrs, #U11425..............................$258,000
JD 310SJ, Cab, Air,4x4, Ext Hoe, #U11935........................$69,500
JD 750K, LGP, 156”PAT Blade, 28” Pads,#U12037 ........$239,000
Page 16 • May 24, 2014 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
USED EQUIPMENTAuthorized Bobcat® DealerBobcat 440 ................Starting at $4,500Bobcat 463’s ..............Starting at $8,000Bobcat 542B ..............Starting at $6,900Bobcat 642 ..............................$7,500Bobcat 642B ............................$8,500Bobcat 743 ................Starting at $8,000Bobcat 751 ......Several Starting at $9,900Bobcat 753 ..............Starting at $10,000Bobcat 763F, Series, Open Cab ....$11,500
Bobcat 773G, With Heat ............$15,900Bobcat 843, Heated Cab ............$10,000Bobcat 853’s ............Starting at $11,000Bobcat 863, With Heat ..............$12,900Bobcat 863G ............................14,900Bobcat 873 ............................$17,900Bobcat S130, 2006, Heated Cab ......CALLBobcat S185s, With Heat and Air, 500Hours to 5000 Hours....Starting at $14,900Bobcat S250..............Starting at $17,500
Compact Track MachinesBobcat T190’s............Starting at $17,500Bobcat T200..............Starting at $17,500Bobcat T250, Gold ......Starting at $24,500Bobcat T300..............Starting at $25,000Other BrandsGehl 4615 Skidloader, Open Canopy $8,500Mustang 2105 ............................CALLNew Holland L175........................CALLJohn Deere 250/260 Models Available....................................................CALL
ExcavatorsBobcat 331’s, Several w/Heat & Open
Canopys ..................Starting at $15,900
Bobcat 334 ................................CALL
Bobcat 337D, A/C, HT................$35,900
Bobcat 341 ..............Starting at $29,990
Bobcat 442 ....Several Starting at $45,000
Large Used Trailer Selection Starting at $1,500
Authorized Bobcat Dealer
NEW M-SERIES IN STOCK!
Bobcat Forestry Cutter on T320, for Rent
Largest Selection in the Midwest!
Bobcat Tractors in Stock Now!Call for Pricing.
Ask about Incentives and Financing.
Toolcats in Stock, Call for Pricing Bobcat S650 with SB240 SnowblowerAvailable Today
U.S. Hwy 12 W • Dassel, MN 55325 320/275-2737 • Toll Free 888/679-4857New Location: Farm-Rite Willmar 1515 West Litchfield Ave. • Willmar, MN 56201 320/235-3672
New Location: Farm-Rite of St. Cloud 810 Mayhew Lake Road N.E. • St. Cloud, MN 56304 844/262-2281www.farmriteequip.com
Bobcat Excavatorsin Stock, Call for Pricing
CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • May 24, 2014 • Page 17
#9838 CAT D6R LGP HYDRAULIC STRAIGHTDOZER WITH TILT, 185 HP, Canopy, Powershift,Differential Steering, VG UC w/ NEW S&L Rails,Top Rollers & Segments, w/ 36" Pads…$91,000
#9892 CAT IT28F ARTICULATED 4 WHEELDRIVE TOOL CARRIER, 125 HP, Cab w/ Heat, 4F-3R Powershift, Quick Attach Bucket AND Forks,Good Tires ..............................................$42,500
#9757 CAT 242 RUBBER TIRED SKID STEERLOADER, 54 HP, Canopy, Auxiliary Hydraulics,General Purpose Bucket, NEW Tires…$18,500
#9889 CASE 580 M II 4x4 LOADER BACKHOE,76 HP, Cab w/ Heat & AC, Extendahoe, AuxiliaryHydraulics, GP Front Bucket, 18" Bucket w/ Teethon Hoe, Good Tires ................................$41,000
#9862 CAT 12G TANDEM DRIVE ARTICULATEDMOTOR GRADER, 135 HP, Cab w/ Heat, Scarifier,Accumulators, Direct Drive Powershift, 12'Moldboard w/ 2' Extension, Side Shift w/ Tip......................................................................$55,000
#9867 CAT 613C SERIES II 11-YARD ELEVATINGMOTOR SCRAPER, 175 HP 3316 Turbo Diesel,Canopy, 6 Speed Powershift Transmission, GoodChains & Flights, Good Tires..................$27,500
#9778 CAT 325CL LR HYDRAULIC LONG REACHEXCAVATOR, 188 HP, Cab w/ Heat & AC, 60' 5"Long Reach Boom, 48" Ditching Bucket, VeryGood Undercarriage w/ 31.5" Pads......$119,000
#9865 CATERPILLAR 308C CR 0.4 CYHYDRAULIC EXCAVATOR, 54 HP 4M40E-1Diesel, Cab w/ Heat & AC, 5'6" Stick, 28" Bucketw/ Teeth, Auxiliary Hydraulics, GoodUndercarriage w/ 17.5" Pads..................$38,500
#9869 9'6" REMCO AW-20S-30 OFFSET DISK,30" Serrated Blades, 12" Spacing, Scrapers,Bearing Wear Plates, Hydraulic TransportWheels, NEW..........................................$22,500
#9857 CAT CS563 84" ARTICULATED SINGLESMOOTH DRUM VIBRATORY COMPACTOR, 145HP, Canopy, Hydrostatic Drive, 50,000 lbCentrifugal Force, Good Tires ................$42,000
#9872 48" x 48" TANDEM PULL-BEHINDSHEEPSFOOT COMPACTOR ....................$5,250
#T1717 2004 FORD F350 XL SUPER DUTY SIN-GLE AXLE FLATBED TRUCK, 6.0 Diesel, AC,Automatic Transmission, 12' Flatbed w/Toolboxes on Both Sides, Ladder Rack, GoodTires ..........................................................$7,250
LULL 944E-42 TELESCOPING FORKLIFT, 110HP, Canopy, 4 Wheel Drive, 4 Wheel Steer, 3Section Boom, 42' Lift, 35'6" Reach, 9,000 lbCapacity, Tilt Fork Carriage w/71" Forks $38,500
#9882 6" GORMAN RUPP 16A2F3L PORTABLETRASH PUMP, 35 HP 3-Cylinder Deutz Diesel,Includes Hoses, Pintle Hitch ....................$8,750
#9701 BROCE RC-350 SELF-PROPELLED PAVE-MENT BROOM, 76 HP Cummins Diesel, Cab w/Heat & AC, Hydrostatic Transmission, 8' Broom,Water System, Good Tires ....................$17,500
CONTACT888-507-8063
www.adamsequipment.com
For our full inventory, please visit www.adamsequipment.com
#9885 INGERSOLL RAND P185JD 185 CFMPORTABLE AIR COMPRESOR, John DeereDiesel, Pintle Hitch ................................$10,250
Y o u r U s e d E q u i p me n t S p e c i a l i s t s S i n c e 1 9 5 7
Page 18 • May 24, 2014 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
Condolences...
M. Adams Equipment CEO,Marvin H. Adams, PassesMarvin H. Adams, 84, Rockton, Ill., died
on April 19, 2014 at Premier Rehab inBeloit, Wis. A hard working man, he owned and oper-
ated M. Adams Equipment Co. since 1957.The Rockford, Ill., company remains activein domestic and international sales of newand used construction equipment, trucks andtrailers. Business will continue under theleadership of President William J. RollingerSr. and Vice President Fredrick M. Adams.Mr. Adams had a long history in the con-
struction equipment field; he also owned andoperated Marv Adams Equipment, DurandFord Sales, Adams Jeep and Camper Sales,Adams Auction Service, RockfordContractors Equipment, Durable ConcreteForms and Duraform Corp. He was born Jan. 1, 1930 in Chicago, Ill.,
as the ninth of ten children born to Dan V.
and Ella (Gauger) Adams. He marriedTheresa Husi in Rockford, Ill. Mr. Adams was a kind and generous man.
He enjoyed racing hotrods, jeeps, motorcy-cles and boats. He most recently enjoyedbeing a gentleman farmer. Survivors include his wife, Theresa
Adams; daughters, Judith (Edward) AdamsSachs and Gayle (Terry) Peterson; sons,Fredrick Adams and Jeffrey (Amy) Adams;daughter-in-law, Linda D. Adams; grand-children, Jason, Matthew, Chad and NeilAdams, Dohn Peterson and Michelle(Andrew) McConnell; great grandson, JustAdams; brother, Daniel (Mildred) Adams;sister, Carol (Richard) Karch and manynieces and nephews. (This story also can be
found on Construction Equipment Guide’s
Web site at www.constructionequipment-
guide.com.) Marvin Adams
Norris Sales’s Kennedy Wins Technician of the Year AwardWarren Kennedy, an eight-year
Norris Sales employee, recentlyreceived Wacker Neuson’sNational Technician of the Yearaward. He was selected fromamong employees at approximately1,200 North American dealerships.“It’s partly Norris Sales and
partly me,” said Kennedy. “I’m avery good mechanic. I’m goodwith people. I’m like a mediator,pretty much. When you go to thejob and the customer is hot and yougot parts, and you are out there,you have to keep your cool and beconfident. That’s the main thing,confidence.“I came from the automotive
field, so it was a little bit different,”Kennedy added. “These machinesare getting more and moreadvanced, so I was alwaysadvanced at the automotive dealer,so I think it generally helps mediagnose faster and get the jobdone with great customer relationsand politeness and respect. Thattakes it a long way.”The search for the award recipi-
ent begins on a regional level, with
the Wacker Neuson field salesforce.“Our field sales force nominates
somebody and that nomination isbased off of knowing the dealers,knowing the ins and outs of theirbusiness on a day-to-day basis andreally identifying who goes aboveand beyond to support the productand make sure owning a piece ofWacker Neuson equipment is the
best experience for the end userthat they can possibly have,” saidJason Oglesby, technical servicemanager of Wacker Neuson.After the regional nomination,
the senior management and theexecutive team at the corporateoffice review the choices, includ-ing going over the details, engag-ing with the dealerships and withthe field sales force and come up
with the top winner of the year. The top winner of the year is
selected and the dealership is spon-sored for the following year for aseries of Wacker Neuson technicalservice schools. “We cover their airfare, hotels
and so on to sponsor them back toany training they want the follow-ing year,” said Oglesby.“We have the best-in-class serv-
ice team, period, and everyone inthe company, across the board, inall our departments are equally asdeserving,” said Karen Zajick,Norris Sales vice president. “We are just really proud that
Wacker Neuson realized and rec-ognized someone that is so hardworking and really represents ourcompany well,” she added.“Exemplarily customer service isWarren’s [Kennedy] number onegoal and that’s our company’sgoal. When we have all that worktogether, it’s nice to see it come tofruition with an award like thisbeing presented. Approximately1,200 dealers around the countryand in Canada are involved. it’sunbelievable. We are really proudof it and it’s something that cer-tainly we will not forget.”For more information, visit
www.wackerneuson.us andhttp://www.norrissales.com/.
(This story also can be foundon Construction EquipmentGuide’s Web site at www.con-structionequipmentguide.com.)CEG
(L-R): Don Zajick, president, and Karen Zajick, vice president, both of Norris Sales; Warren Kennedyand his wife, Shana; and Jason Oglesby, technical service manager, and Joe Sluke, field service train-er, both of Wacker Neuson.
CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • May 24, 2014 • Page 19
(262) 781-3770
SEE PHOTOS OF OUR COMPLETE INVENTORY AT WWW.ARINGEQUIPMENT.COM13001 W. Silver Spring Drive
Butler, WI 53007
Jim KingMobile: (414) 530-0592
Fax: (262) 781-5053Email: jking@aring.com
WE ALSO HAVE AGGREGATE EQUIPMENT. PLEASE CALL BREK ZORTMAN (414) 750-3351 FOR MORE INFO.
2009 Volvo L60F, Cab, A/C, Radio w/CD, Heated SuspensionSeat, Work Lights, 3rd & 4th Functions, Boom Suspension,Hydraulic Attachment Bracket, Reversible Cooling Fan, EngineBlock Heater, Dymax 4cy High Tip Bucket w/BOE, 20.5R25Tires – Front 0% (Solid) / Rear 10% (Air Filled w/Sealant)$Call
2003 Volvo EC360BLC, A/C, Radio, Heated Air SuspensionSeat, Walkway, Work Lights, 36” Pads, 50% UC, 21’2” Boom,10’6” Stick, 17,196 lb Counterweight, Geith Pin Grabber, 30” &60” Buckets ..................................................................$68,000
1984 Bucyrus-Erie 88B - totally rebuilt Bucyrus 88B, newcab, new tin work, rebuilt cummins engine, completely rewired....................................................................................$359,000
2013 Volvo L90G, Camera w/Color LCD Monitor, SlidingWindow Operator's Door, Halogen Work Lights Front/Rear,Boom Suspension, Hydraulic Attachment Bracket, ReversibleCooling Fan, Reverse Alarm, Rotating Warning Beacon, RearFrame Cover Plates, Front Frame Footsteps, Full Rear Fenders,CareTrack System, 104" 3.5cy Bucket w/BOE, 20.5R25 MIXHA2 L-3 Tires, Volvo D6H (Tier 4i) Engine..............$195,000
2013 Volvo L70G, Heated Air Suspension Operator's Seat,Rear Camera, Work Lights, Boom Suspension, Hydraulic 4Functions, , Reversible Cooling Fan, Engine Block Heater,Rear Frame Cover Plates, Logging Counterweight, CareTrackSatellite System, 100" 3.1cy Bucket w/BOE, 20.5R25 MichelinXHA2 L-3 Tires, Volvo D6H (Tier 4i) Engine, MUNICIPALTRADE ......................................................................$175,000
2012 Dressta TD25M, 26" Severe Service Pads, 90% UC,Hydraulic Controls (3 Spool Valve / 2 Lever), Severe ServiceCrankcase & Transmission Guards, Final Drive Rock Guard,Full Length Track Roller Guard, Engine Block Heater,Start/Charging Receptacle Plug Assembly w/15' Cable, Semi-U Blade (12.5cy) w/Reinforced Center Push Plate & HydraulicTllt, Fixed Drawbar ....................................................$299,500
2008 Volvo DD24 - Dual 47” Drums w/Urethane Wipers,ROPS, Sliding Seat w/Dual Lever Control, Hydrostatic Drive,Work Lights, Rotating Beacon, Offset Articulation Joint, 68Gallon Pressurized Water System w/4 Nozzles Per Drum,Loading/Unloading Traction Control, (NEW) 3 CylinderCummins Engine (32HP), Operating Weight 5,725 lbs$17,500
2008 Volvo A40E, A/C, Radio w/CD, Air Suspension Seatw/Armrest, Front Work Lights, Elec Hood Opener, DelayedEngine Shutdown, 29.5R25 Tires ....................................CALL
2011 Volvo DD138HF - Back up alarm, infrared temp sensor,work lights, 328 gal water tank cap, operating weight 30,325lbs, vibrating frequency: 3200 vpm, vibration centrifugal force:21,840-42,260 lbs, 84" drum width ............................$167,000
2012 Volvo L150G, 26.R25 L3 VJT Bridgestone Tires, VolvoD13H-E Engine, Radiator, Reversible Cooling Fan, Rear ViewCamera, Engine Block Heater, Boom Suspension, RehandlingCounterweight, 126” 5.5cy GP STE Bucket w/BOE ..$265,000
2011 Volvo SD116DX, Work lights, flow divider, bolt on pad footshell, inside scrapper, universal scrapper, grill support installa-tion, operating weight 23,930 lbs, vib frequency 1,870-2,018vpm, vibration centrifugal force: 47,900-61,000 lbs, 84" drumwidth ..........................................................................$121,500
2012 Volvo BL70B, Municipal Trade, 92.5” Loader Bkt, Mech.Att. Bracket, 1.3 CY GP Bkt w/Spill Guard, EXT Dipper Arm, PilotControls, 4WD, A/C, Radio w/CD, MP3 Connection, DoubleBattery, Boom Suspension, Additional 1080lb Counterweight ........................................................................................$87,500
2005 Volvo EC460BLC, A/C, Radio, 36” Pads, 13’ Stick,Hammer/Shear Piping, Q/C Piping, Pilot Pattern ControlChange, Walk Way, No Bucket ........................................CALL
2013 Volvo EC250DL, Municipal trade, 19'9" boom, 11'10" arm,36" track pads, engine block heater, air susp seat w/heat, joy-stick 3 switch & 1 prop, climate control with a/c, radio w/cd, rearview camera, 2 pump double act. piping, quick fit piping, pilotpattern controls, straight travel pedal, caretrack ........$217,500
2011 Volvo DD70HF, Backup Alarm, Operating Weight 14,895Lbs, 205 Gallon Water Tank Capacity, Vibration Frequency:4000 VPM, Vibration Centrifugal Force: 7,820-21,080 Lbs, 57”Drum Width ................................................................$110,000
2011 Volvo A40F, Volvo D16H (476hp) Tier 4i Engine, HeatedAir Suspension Seat w/Armrest, Front Work Lights, Rear ViewColor Camera, Electric Hood Opener, Delayed EngineShutdown, Engine Block Heater, CareTrack TelematicsSystem, 29.5R25 Michelin XADN Tires ....................$440,000
Page 20 • May 24, 2014 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
$1.1B in Public Financing...
Minnesota Project Funding Debatein Full Swing Between House, SenateBy Brian Bakst
ST. PAUL, Minn. (AP) Minnesota House and Senateleaders put forward separate proposals May 5 that commit$1.1 billion in public financing for projects ranging from col-lege building renovations to theater restorations, but they dif-fer on some of the details about where limited constructiondollars should go. After weeks of waiting, Democratic leaders of the state
Senate released their plan for borrowing of $846 million andfor using about $200 million in cash from the state’s $1.2 bil-lion budget surplus. House leaders revised their prior pro-posal to match the Senate in size, though what gets fundeddiffers. Gov. Mark Dayton, meanwhile, reiterated his pitchfor a bigger plan given low interestrates and a long to-do list. As they stand now, the House and
Senate would enter final negotiationsneeding to sort out whether to spendmoney to outfit Minnesota’s neweststate park, to pipe water into southernMinnesota and to reconstruct the JamesFord Bell Museum of Natural Historyin St. Paul. Those are among the bigdifferences, with plenty of smaller onesthroughout the two bills. Senate Capital Investment
Committee Chairman LeRoy Stumpfsaid there were far more worthy proj-ects than money to go around. He saidthe bill emphasizes repairs to crumblinginfrastructure while also making roomfor cultural amenities. “A lot of our communities are getting
up to 125, 150 years old and stuff doesn’t last forever. Wehave to make a recommitment as a Legislature to figure outhow to fund these core things you need to run,’’ said Stumpf,DFL-Plummer. “You need to have development. You needhousing. You need roads. You need bridges.’’ The measure is one of a few major bills that lawmakers
hope to pass before adjourning their election-year session.Majority Democrats in the House and Senate need someRepublican votes to meet a three-fifths passing threshold onthe borrowing plan. The separate but connected cash billrequires only a simple majority. Republicans said that projects they see as vital — such as
pothole repair money or full funding for a water pipeline insouthern Minnesota — have been crowded out by frillyitems, such as zoo exhibits or ski hill enhancements. “Bonding is debt. It’s borrowing. It has to be repaid,’’ said
Sen. Roger Chamberlain, R-Lino Lakes. “So we must besmart about how we use that money.’’ Minnesota has more than $6.2 billion in outstanding gen-
eral obligation debt already, but state finance guidelines
leave plenty of room to borrow billions more. Dayton said he wants a borrowing bill of $1.2 billion. “The bonding bill is really constrained by the Republicans
ideological obsession with spending and doing as little aspossible,’’ Dayton said. Colleges are among the biggest recipients of money — for
science labs, student centers and maintenance of the build-ings they already have. The largest single item in either pro-posal is $126 million to finish the Capitol renovation; theSenate’s plan would pay for that in cash while the Housetucks it into the borrowing package. There’s $80 million devoted to affordable housing proj-
ects in the Senate, which Stumpf said represents the largestinvestment of that type in state history. The Senate proposal
is more generous than recommendations in the House andfrom Dayton on that front. The Senate bill also authorizes money to build out the new
state park at Lake Vermilion, to repair local bridges and toremodel the state’s security hospital in St. Peter. Civic centerupgrades in Rochester, St. Cloud and Mankato would get aboost, as would theater repairs across the state. Most of thoseare in the House version, too. Among the proposals from Dayton, the House and the
Senate, one of the key variations surrounds the Lewis andClark water pipeline project for southwestern Minnesota.Dayton has highlighted the need to put at least $20 millionand up to $70 million in for that project to help bring waterfrom the Missouri River to a parched section of the state. The Senate bill puts in only $13 million, though Stumpf
said there is a potential $7 million local match. Federalmoney also is a possibility. The House version leaves it outentirely.
(This story also can be found on Construction Equipment
Guide’s Web site at www.constructionequipmentguide.com.)
“A lot of our communities are getting up to125, 150 years old and stuff doesn’t last forever. We have to make a recommitment asa Legislature to figure out how to fund thesecore things you need to run.’’
LeRoy StumpfSenate Capital Investment Committee Chairman
KIOTI Tractor, a division of Daedong-USA Inc., kickedoff its fourth annual breast cancer awareness campaign witha special raffle during key industry tradeshows. The winners,Jenny Black of Vonore, Tenn., and Charles Greer of Chugiak,Alaska, each won a limited edition pink MECHRON 2200utility vehicle during the National Farm Machinery Showand the World Ag Expo in February.“My wife and I attend the World Ag Expo in Tulare every
year and are very pleased to have won the pink UTV. It hasproven itself to be quite handy in transporting my wife andgrandchildren around the farm,” said Greer, customer of Sand W Feed & Supply Inc., in Carson City, Nev. “We arehappy to have had the opportunity to participate in this veryworthwhile and charitable effort supporting breast cancerresearch. My youngest sister is a recent breast cancer sur-vivor, so winning the unique pink UTV to use in our farmingoperation is a special bonus.”The raffle at the two tradeshows combined raised more
than $25,000. All of the proceeds will be given to the UNCLineberger Comprehensive Cancer Center, a leading nation-al cancer center located in Chapel Hill, N.C. The donationsare a continuation of a long-term relationship between thenational tractor brand and the UNC Lineberger Center.The raffles at the February tradeshows mark the start of
KIOTI’s yearlong breast cancer awareness campaign.Starting in May, KIOTI will travel throughout Canada witha third limited edition pink MECHRON 2200 utility vehicle.With stops at dealerships and tradeshows, the tour will con-clude on Oct. 5 during the 2014 CIBC Run for the Cure(www.runforthecure.com). KIOTI also will use the tour torecruit members for Team KIOTI, KIOTI’s fundraising teamfor the Run for the Cure. A random participant from theTeam KIOTI fundraiser will win the third limited editionpink MECHRON 2200 utility vehicle. For more information, visit www.kioti.com.(This story also can be found on Construction Equipment
Guide’s Web site at www.constructionequipmentguide.com.)
KIOTI Raises MoreThan $25,000 forBreast Cancer
PLAN. PROVIDE.
TRAIN.
www.osha.gov
www.osha.gov/stopfalls
PRO
ww
.NAITR.EDIVPRO
AN.LP
lslapfots/vv/og.ahso.ww
EN BAS CFOORDNAREDDALM ORS FLLAF
.osha.gowww
!DETNEVER PSDLOFFACS, S
v.osha.go
CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • May 24, 2014 • Page 21
3478 5th Ave. S. • Fort Dodge, IA 50501 • (515) 574-2302
4734 Sergeant Rd. • Waterloo, IA 50701 • (319) 234-8710
106 8th St. • Sergeant Bluff, IA 51054 • (712) 943-4470
Mid Country Machinery(800) 206-5936
www.midcountrymachinery.com
2014 KOBELCO SK260-9 LC, EROPS, Heat, 2 Units aval ..................................$166,0002013 KOBELCO SK210 LC-9, EROPS, 3 Units aval............................................$163,5002013 KOBELCO SK260 LR-9, Long Reach, 439 Hrs..........................................$243,0002013 KOBELCO SK295 LR-9, Long Reach, 245 Hrs..........................................$238,5002013 KOBELCO SK230 SRLC, Aux Hyd., A/C, 2881 Hrs....................................$162,0002013 KOBELCO SK140 SR, EROPS, Blade, Plumbed ........................................$143,0002013 SANY SY235 C, EROPS, A/C, Heat, 106 Hrs ............................................$129,5002013 SANY SY215 C, EROPS, Heat, A/C, 102 Hrs ............................................$129,9002013 SANY SY135 C, EROPS, Aux Hyd, 2 Units aval ..........................................$96,0002012 KOBELCO SK350LC-9, EROPS, 2 Units aval ............................................$245,0002012 SANY SY135 C, EROPS, A/C, Heat, 402 Hrs ..............................................$79,0002007 KOBELCO SK350 LC-8, EROPS, A/C, Heat ................................................$95,0002006 KOMATSU PC200 LC-8, EROPS, Thumb, 4235 Hrs ..................................$74,5002006 HITACHI ZX160, EROPS, Thumb, A/C, 2974 Hrs........................................$68,5002006 DEERE 230C LC, EROPS, QC, A/C, Autolube ..............................................$85,0002006 KOBELCO SK115 SRDZ, EROPS, Blade, Thumb ........................................$63,0002006 KOBELCO SK160 LC, EROPS, Heat, 6809 Hrs............................................$49,5002005 KOBELCO SK210LC-6E, EROPS, Aux Hyd. 5880 Hrs ................................$78,0002005 KOBELCO SK160 LC, EROPS, A/C, Heat, 2182 Hrs ....................................$67,5002004 KOBELCO SK135 SR, EROPS, Heat, 5937 Hrs ..........................................$39,5001989 CAT E110B, EROPS, A/C, Heat, Clean Unit ......................................SOLD $23,500
2011 JCB 3C-14, EROPS, A/C, Heat, 874 Hrs......................................................$62,5002006 CAT 420E, EROPS, A/C, Heat, 4x4, 2590 Hrs ............................................$49,5002005 CAT 420DIT, EROPS, Heat, X-hoe, 5201 Hrs ..............................................$49,5002003 CAT 430DIT, EROPS, A/C, Heat, 3384 Hrs ..................................................$52,0001998 DEERE 310SE, EROPS, A/C, Heat, 6814 Hrs ..............................................$28,0001998 CAT 416C, EROPS, Heat, Aux Hyd., 7506 Hrs ............................................$21,2501990 DEERE 310C, EROPS, Ex-county unit ........................................................$21,0001990 DEERE 510C, EROPS, Heat, A/C, 4415 Hrs ................................................$18,0001986 DEERE 610C, EROPS, Heat, 6187 Hrs........................................................$16,5001977 CASE 580C, EROPS, Heat, 7113 Hrs ............................................................$9,000
2013 KAWASAKI 95Z7, EROPS, A/C, Heat, 236 Hrs..........................................$425,0002013 KAWASAKI 80Z7, EROPS, Hyd. Coupler, 159 Hrs ....................................$223,0002012 KAWASAKI 90Z7, EROPS, Ride Control, 841 Hrs ....................................$295,0002012 DEERE 624K, EROPS, A/C, Heat, 1013 Hrs ..............................................$149,5002011 CAT 928HZ, EROPS, Heat, A/C, 208 Hrs ..................................................$129,0002010 CAT 924H, EROPS, QC, Ride Control, 1194 Hrs ......................................$118,0002008 DEERE 624J, EROPS, JRB QC, A/C, 5753 Hrs..........................................$105,0002006 CAT IT38G, EROPS, Heat, A/C, 7731 Hrs....................................................$75,0002005 KAWASAKI 90Z, EROPS, BOCE, Heat, 7724 Hrs ......................................$111,0002005 CAT 938G, EROPS, A/C, Heat, GP Bkt., 7734 Hrs ......................................$74,0002005 KOMATSU WA150-5, EROPS, A/C, Heat, 2381 Hrs ....................................$59,0002004 VOLVO L45B, EROPS, A/C, Heat ................................................................$35,0001975 MICHIGAN 75B, EROPS, Heat ..........................................................SOLD $16,0001970 CAT 980B, EROPS, Heat ..................................................................SOLD $16,000
2013 KOBELCO 35 SR-5, EROPS, Heat, 2 Units aval ..........................................$41,0002013 KOBELCO SK35 SR-5, OROPS, Aux Hyd., 220 Hrs ....................................$32,5002012 KOBELCO SK80 SR, EROPS, Heat, A/C, 653 Hrs........................................$85,5002012 KOBELCO SK55 SR-5, EROPS, Aux Hyd, 235 Hrs......................................$59,0002012 KOBELCO SK55 SR-5, OROPS, Aux Hyd., 287 Hrs ....................................$59,0002012 KOBELCO SK35 SR-5, OROPS, Aux Hyd., 194 Hrs ....................................$33,5002005 KOBELCO SK70 SR, EROPS, Plumbed, 2575 Hrs ......................................$39,000
2012 BOMAG BW211 D-4, EROPS, A/C, 84” 184 Hrs ........................................$83,5002010 VIBROMAX VM46 PD, OROPS, 55”Pad, 162 Hrs ......................................$46,5002008 CAT CP56, OROPS, 84” Pad Foot, 1249 Hrs ..............................................$89,0002007 CAT CP563 E, OROPS, Pad Foot, 84”, 1391 Hrs ........................................$84,0002007 DYNAPAC CA150 PD, OROPS, 66”, 228 Hrs ..............................................$55,0002007 DYNAPAC CA250 PD, OROPS, 84”, 2030 Hrs ............................................$57,5002007 STONE SD43, OROPS, 999 Hrs ..................................................................$18,0002006 CAT CS533 E, OROPS, 84”, 2413 Hrs ........................................................$72,0002006 BOMAG BW177 PDH, OROPS, Pad Foot, 424 Hrs ....................................$44,0002006 IR SD70 D, OROPS, Smooth Drum, 1354 Hrs ..........................................$39,0002006 IR SD70 D, OROPS, Smooth Drum ............................................................$39,0002005 BOMAG BW177 PDH-3, OROPS, Pad Foot, 1079 Hrs ................................$39,0002005 BOMAG BW211 D-3, OROPS, 84”, 2181 Hrs ............................................$54,0002004 HYPAC C832 C, OROPS, 66” Pad Foot, 1386 Hrs ......................................$33,500
2012 CAT D8T, EROPS, 8SU Blade, SS ripper, 699 Hrs ....................................$579,0002012 DEERE 700K LGP, EROPS, Topcon ready, 568 Hrs ..................................$155,0002011 CAT D6T XL, EROPS, Ripper, Sweeps, 1359 Hrs......................................$269,5002010 DEERE 550J, EROPS, Draw Bar, 6way, 2477 Hrs ......................................$65,0002009 CAT D6T XW, EROPS, SU Blade, Heat, 4571 Hrs ....................................$215,0002008 CAT D6T XW, EROPS, SU Blade, ripper, 3580 Hrs....................................$212,5002008 CAT D6T XW, EROPS, 6 way, A/C, 4512 Hrs ............................................$195,0002008 CAT D6T XL, EROPS, SU Blade, A/C, 4603 Hrs ........................................$186,5002008 CAT D6T LGP, EROPS, Aux Hyd., A/C,4487 Hrs ......................................$190,0002008 CAT D6N LGP, EROPS, 6 way, Heat, 4392 Hrs ........................................$135,0002008 CAT D6N LGP, EROPS, 6 way, A/C, 3853 Hrs ..........................................$135,0002008 CAT D6T XL, EROPS, SU Blade, 4377 Hrs................................................$195,0002008 CAT D6K XL, EROPS, 6 way, Topcon, Heat ..............................................$157,5002008 DEERE 700J XLT, EROPS, 6 way, 1081 Hrs..............................................$117,0002008 KOMATSU D65EX-15EO, EROPS, Winch, 4927 Hrs ................................$119,5002006 CAT D6R XWVPIII, EROPS, 6way, ripper, 8023 Hrs ................................$147,5002006 CAT D6R XLIII, EROPS, 6 way, Sweeps, 6568 Hrs ..................................$142,5002006 DEERE 550J LGP, OROPS, 6 way, 3294 Hrs ..............................................$43,0002005 CAT D6R XLII, EROPS, SU Blade, A/C, 7547 Hrs ....................................$123,5002005 CAT D6R XWII, EROPS, Aux Hyd., 8361 Hrs............................................$130,0002004 CAT D6R XWII, EROPS, Heat, A/C, 12805 Hrs ........................................$117,5001998 KOMATSU D65EX-12, EROPS, SU Blade, 9166 Hrs ..................................$79,5001987 CAT D6H, OROPS, SU Blade, 14439 Hrs ....................................................$45,000
EXCAVATORS
WHEEL LOADERS
COMPACTORS
DOZERS
LOADER / BACKHOES
MINI EXCAVATORS
2012 CATERPILLAR D8T, Ripper Available for Additional Cost ......................................................................................$575,000
2012 JOHN DEERE 624K..............................................$141,500 2011 CATERPILLAR 928H............................................$126,000
Page 22 • May 24, 2014 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
PRE-OWNED, JOB READY EQUIPMENT NOW AVAILABLE! Cincinnati • Mt. Orab • Columbus • Lexington • Louisville
Call Brad Kent at 513-266-7761 or on our USED EQUIPMENT HOTLINE: 888.BOBCATS
Parts • Sales • Service • Rental • Training
To See More Machines, Please visit us online at www.bobcat-ent.com
2010 S650 Bobcat Loader, 1010 Hrs, Cab Heat Air, 2 Speed,CN 87835..........................................................................$34,500
2010 S250 Bobcat Loader, 1825 Hrs, Open ROPS, CN 90133..........................................................................................$28,500
2009 S250 Bobcat Loader, 3920 Hrs, Open ROPS, CN 90127..........................................................................................$25,000
2011 3400 Bobcat Utility Vehicle, 250 Hrs, 4WD, Gas Engine,CN 81483..........................................................................$10,000
2008 T300 Bobcat Track Loader, 1640 Hrs, Open ROPS, CN88966 ................................................................................$31,500
2008 Bobcat T190, 1825 Hrs, Open ROPS, CN 88964........................................................................................................$24,000
2008 331 Bobcat Excavator, 1590 Hrs, Open ROPS, CN89337 ................................................................................$25,000
2010 325 Bobcat Excavator, 1125 Hrs, Open ROPS, LongArm, CN 75883 ................................................................$22,000
Visit www.sealsaver.comfor more information or contact us at
1-800-683-5189
Exclusively manufactured by:
Fluid ControlServices, Inc.1155 Allgood Road • Suite 15
Marietta, GA 30062
1-800-683-5189Fax: 770-509-5832
SEAL SAVER has proven effective inConstruction, Mining, Waste Management,Quarries, Refineries, Marinas, Recycling,Wood Products Processing, Steel Mills
and Hot Slag Industries.
SatisfactionGuaranteed!
SEAL SAVER PROTECTIVECYLINDER COVER
KOMATSUD65EX-15
STOP the never ending cycle of cylinder repairs.
Made inthe USA
The SEAL SAVER WILL:Protect cylinders from the elements • Eliminate dings and dents from fallingdebris • Reduce particle contamination of hydraulic systems • Prevent pitting due to chemical washes • Extend the lifeof cylinder seals • Eliminate rod scoring
WE VULCANIZE
CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • May 24, 2014 • Page 23
Credit Where It’s Due...
BCA Names 2014 Excellance inConstruction Award WinnersBuilding Contractors Association of
Northeast Indiana (BCA) recentlyannounced winners of the 2014 BCAExcellence in Construction Awards spon-sored by Wells Fargo. The awards recognize the most outstand-
ing construction projects within a 75-mi.radius of Fort Wayne, Ind., completed during2013. The winning projects were selected byan independent judging panel based on proj-ect uniqueness, significance/impact to thecommunity where constructed, level ofBCA-member involvement, and the pro-ject’s safety record.2014 BCA Excellence in Construction
Award winners:• Renovation — Under $2 million:
Science Central, Science on a Sphere; FortWayne, Ind. Submitted by DesignCollaborative and Fetters Construction
• Renovation — Over $2 million: Edy’s,
Employee Facilities Expansion, Fort Wayne,Ind. Submitted by MSKTD & Associatesand The Hagerman Group
• New construction —Under $6 million:Jorgensen Family YMCA Outdoor AquaticCenter, Fort Wayne, Ind. Submitted byMichael Kinder & Sons Inc. and MoakePark Group
• New construction —Over $6 million:Indiana Tech Law School, Fort Wayne, Ind.Submitted by Michael Kinder & Sons Inc.Awards were formally presented to the
applicant and the owner/client representativeat the recently held BCA SpringMembership Dinner & Awards Banquet.Nearly 175 construction and business pro-fessionals were in attendance.
(This story also can be found on
Construction Equipment Guide’s Web site at
www.constructionequipmentguide.com.)
WE STAND READY.
e decision makerse arWts Specialistsarax PtrNor
ou up and running and prye line of qualitensivtxe
all makes when y
oblem solve pre arW. e decision makerse only one goal ve haW. ts Specialists
trt Nor. Ao�tableou up and running and premanufacy new and re line of qualit
e the people tve haWou need them. all makes when y
our e ye arW. ersoblem solve only one goal — o keep t
e an ve haax, wtror ts f for ed parturemanufacoe the people t
W. eedcou suchelp y
, WIshlandA715.682.5522 715.693.3820
. eadye stand rW
, WIMosinee715.693.3820
, MNapidsand RrG218.326.9427
Y, KichmondR859.623.2030
trom/Nor.cebookfac
, WIallsFa hippewC715.834.2924
, WIoMonic715.487.5583
218.722.7456
218.759.1996
ncaxItr
uluth, MND218.722.7456
emidji, MNB218.759.1996
anaba, MIEsc906.789.9054
Y, KouisvilleL502.253.3721
Yeen, Krwling GoB
270.842.3400
Yondon, KL606.862.8447
Page 24 • May 24, 2014 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
YOU SHARED YOUR IDEAS. IN FACT, YOU GAVE US BUCKETFULS.
Introducing the new E-Series Skid Steers and Compact Track Loaders. When we asked operators like you to design them, there was no shortage of bright ideas. Like
-percent more foot room. Up to 10-percent more horsepower. Optional switchable controls that let operators choose between ISO, H-pattern, and foot controls. And easier attachment hookup. You challenged us to make them great, and we didn’t disappoint. To see more bright ideas, visit your dealer or our website.
YOU’RE ON.TM www.JohnDeere.com/Eskid
IN FACT, YOU GAVE US BUCKETFULS.
www.JohnDeere.com/Eskidwww.JohnDeere.com/Eskid
Contact us today.
Scharber & SonsRogers, MN
763-428-4107
Isanti County EquipmentIsanti, MN
Jesse Kraft763-444-8873
www.mnequipmentsolutions.com
RDO Equipment Co.Burnsville, MN
Matt Dull952-890-8880
mdull@rdoequipment.com
0% for 48 Months*
Expires 8/31/14
*Offer ends 8/31/14. Some restrictions apply; other special rates and terms may be available, so see your dealer for detailsand other financing options. Subject toapproved credit with John Deere Financial.
CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • May 24, 2014 • Page 25
2002 Komatsu PC95R-2: #50051, Cab/Heat, 20”Tracks, Aux Hyd, Blade, 1800 Hrs............$69,500
2004 Komatsu WA95-3: #82112, Cab, QC,Bucket, 4600 Hrs ......................................$49,500
2004 Komatsu PC160LC-7: #81899, Cab/AC, AuxHyd, 5100 Hrs ..........................................$84,500
2008 Komatsu D65EX-15EO: #81640, Cab/AC, Sweeps,Rear Screens, KOMTRAX, 5800 Hrs......$149,500
2007 Komatsu WA250-5: #82117, Cab/AC, QC,Bucket, 4450 Hrs ......................................$93,500
2006 Komatsu PC200LC-8: #82111, Cab/AC,31.5” Tracks, 9’7” Arm, 4100 Hrs..........$121,500
2007 Komatsu PC300LC-8: #81926, Cab/AC, 10’Arm, Rear Camera, 6650 Hrs ................$149,500
2011 Komatsu WA380-6: #81996, Cab/AC, GPBkt, KOMTRAX, 7300 Hrs ......................$129,500
2008 Komatsu D51PX-22: #81881, Cab/AC, 28”Tracks, PAT Blade, KOMTRAX, 900 Hrs $143,500
2008 Komatsu WA320-5: #81735, Cab/AC, QC,Bucket, 3350 Hrs ....................................$134,500
2004 Komatsu D65EX-15: #80803, Cab/AC, 20”Tracks, Drawbar, 3650 Hrs ....................$139,500
2010 Komatsu GD655-3EO: #81938, Cab/AC, 14’Moldboard, 17.5x25 Tires, KOMTRAX, 1700 Hrs ..................................................................$189,500
Call Doug / Sam:
(866) 485-7180
Page 26 • May 24, 2014 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • May 24, 2014 • Page 27
Efficiency Production Inc.Names Luby as New DealerEfficiency Production Inc., an American
manufacturer of trench shielding and shoringsafety equipment, recently announced theaddition of Luby Equipment Services toEfficiency’s national dealer network.“We are very excited to be entering into a
new venture with two very strong equipmentrental companies who really understand the
dynamics of the underground utility industryin the Midwest,” said Gary Bushong,Efficiency’s vice president of sales.From its headquarters in St. Louis, Mo.,
Luby Equipment Services will now offertrench safety services and equipment rentalfor municipalities and contractors in south-west Illinois and eastern Missouri. “With this new partnership, the future is
bright for Luby’s new shoring rental opera-tion,” said Tom Ernst, senior shoring spe-
cialist of Luby Equipment’s trench shieldingand shoring division. “The dealer support wereceive from Efficiency is second to none,and that truly makes a difference whenworking with our customers.” said Ernst.Incorporated in 1971, EPI was the first
shoring manufacturer to commercially man-ufacture and distribute trench shields in the
United States andCanada. Since then,Efficiency has grown tobe a leading manufac-turer of trench shieldingand shoring equipment.With a staff of profes-sional engineers, prod-
uct specialists, and a state-of-the-art manu-facturing facility, Efficiency provides prod-ucts throughout the United States, Canada,South America and many other parts of theworld.For more information, visit www.lubye-
quipment.com or www.efficiencyproduc-tion.com.
(This story also can be found on
Construction Equipment Guide’s Web site at
www.constructionequipmentguide.com.)
Montabert to Sell Under Its OwnTrademark in North America
In 2005, Tramac Corporation transferredits rights to the usage of the trademark andbrand “Tramac” for hydraulic breakers andother demolition equipment to the parentcompany of Montabert, the French manu-facturer of Tramac hydraulic breakers.As of March 2014, all Montabert made
products will be sold in North Americaunder the Montabert trademark and brand.Tramac Corporation (USA) will continue
to operate as actively as ever manufacturing,
marketing and selling Tramac rock breakerboom systems and unique excavator attach-ments under the “Tramac” and “MuscleMate” brands.In Canada, Tramac Equipment Limited
remains the exclusive distributor ofMontabert hydraulic breakers and demoli-tion attachments.
(This story also can be found on
Construction Equipment Guide’s Web site at
www.constructionequipmentguide.com.)
As of March 2014, all Montabert made products will be sold in North America underthe Montabert trademark and brand.
Portable Power
Call ASC Construction Equipment for Rental Rates at 701.250.4882
LSC LIGHT TOWER
• Kubota D1005bg Engine
• Tier 4 Final Emissions
• Water Cooling System
• 28 Gallon Diesel
Fuel System
• 6kW Prime Power Rating,
60Hz, 1.OPF
• 120 Available Voltage
Single Phase
Page 28 • May 24, 2014 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
Love-at-First-Sight Demo Turns Into Long-Term RelationshipBy Jeff WinkeSPECIAL TO CEG
For Chester Bross ConstructionCompany, headquartered inHannibal, Mo., a bit of a love-at-first-sight product demo has turnedinto a permanent, solid relation-ship. Chester Bross has more than40 years of general paving andconstruction experience rangingfrom, as they phrase it, “drivewaysto highways.” The company’sstart-to-finish services includeexcavation, asphalt paving, con-crete paving, curb and gutters,cold-milling, diamond grinding,profiling, culverts, bridges, struc-tures, surveying and site rehabilita-tion.“We brought our new, latest
technology Roadtec RP-190e rub-ber-tired asphalt paver to a ChesterBross road project and let them runthe machine on a current project,”said Austin Miller, regional salesmanager, Roadtec Inc. “The ridenumbers they were achieving weresubstantially better than what theywere getting with an older piece ofexisting equipment. The numberscontinued to hit maximum bonuson the project for the next two daysof the demo.“Mike Bross, owner and vice
president of operations of ChesterBross Construction Company, andhis father, Chester Bross, made thedecision to purchase strictly on theperformance they were experienc-ing with the Roadtec RP-190epaver during the demo trial period. “Like everyone in the industry,
we were having a challengingbusiness year,” said Mike. “Wewere not intending to make anylarge capital investments, but if we
can increase productivity and getresults achieving or approximating100 percent bonus then the pur-chase of a new machine becomes ano brainer.”According to the manufacturer,
the 10-ft. (3 m) Roadtec RP-190ehighway class asphalt pavers havereceived a major redesign, includ-ing the addition of Tier IVi,Cummins QSB 6.7 engines rated at230 hp (172 kW) at 1,800 rpm, andheavy-duty offset type conveyorchains, chromium carbide floorplates that can drop in withoutbolts, and updated dual operatorstations that feature hydraulic-pivot consoles and selectable seatpositions. Additionally, the paver’saugers can be operated independ-ently of the conveyors, which isdesigned to provide the operatorwith complete control over thematerial.
One of Chester Bross’s first jobsrunning the new paver was a 14-mi. (22.5 km), four-lane stretch ofI-55 in Scott County, Mo., near thecity of Sikeston. Interstate highwayI-55 runs through the middle of theUnited States stretching north fromLaPlace, La. (about 30 mi [48 km]west of New Orleans), to Chicago.“This was a super-pave job,
meaning we placed two lifts ofasphalt over the old, worn-out con-crete highway surface,” saidPhillip Dowell, site superintendentof Chester Bross. “The first coursewas a deeper two-inch lift tosmooth out the uneven surface.The finish lift was 1¾-inches ofstone-mastic asphalt [SMA] toprovide longer wear life on thisstretch of heavy traffic highway.”The SMA is stickier, which is
designed to adhere better to thebase layer. A total of 120,000 tons
(108,862 t) of asphalt was used onthis project—50,000 tons (45,359t) for the finish lift, 70,000 tons(63,502 t) for the base.The $7 million Missouri DOT
(MoDOT) project was delayedbecause of the rainy weather in thespring. Chester Bross commencedwork in late September and neededto be completed by the secondweek in November, before winterweather might start.“This less than two month
timetable was a bit of a productioncrunch for our eight-membercrew,” Dowell said. “We worked16 to 18-hour days and we werehappy to have the new RP-190epaver. The machine’s anti-segrega-tion design, electric flow gates, and18-inch hydraulic tunnel exten-sions provided the control of thematerial flow from the hopper tothe screed that we needed.”
In addition to the consistent laydown of the asphalt pad, Dowellliked that the paver could be set upquickly in the morning and with itsnewer technology, the machineautomatics are designed to ensureexacting results without regularadjustments. The Roadtec RP-190e paver features a 10-ft. (3 m)main screed with a 5-ft. (1.5 m)extension wing on the right and a4-ft. (1.2 m) extension wing on theleft, which accommodated the 12-ft. (3.7 m) wide highway.“Compared to our old paver, we
are able to run the RP-190e muchfaster without sacrificing quality,”Dowell said. “I’m not sure wewould have met the project dead-line without the efficiencies of thenew paver. We literally saved atleast two days of production.”The MoDOT I-55 project had a
pavement surface smoothnessrequirement with monetary bonus-es for achieving better than theminimum requirement of anInternational Roughness Index(IRI) of 80 or better. Chester BrossConstruction Company achievedIRI scores of less than 30 on mostof the completed roadwork, whichearned them a 5 percent bonus.The remaining sections werebetween 30 and 70 on the IRIscale, netting them a 3 percentbonus.“Clearly, we wouldn’t have
achieved those high Profilographmeasures without the new RoadtecRP-190e paver,” said Dowell.“The screed is easy to use, the con-trols are easy to understand, andthe machine requires little adjust-ing to get the results we got.”MoDOT inspectors were
According to the manufacturer, the 10-ft. (3 m) Roadtec RP-190e highway-class asphalt pavers havereceived a major redesign, including the addition of Tier IVi, Cummins QSB 6.7 engines rated at 230hp (172 kW) at 1,800 rpm, and heavy-duty offset type conveyor chains, chromium carbide floorplates that can drop in without bolts, and updated dual operator stations that feature hydraulic-pivot consoles and selectable seat positions.
The MoDOT I-55 project had a pavement surface smoothness requirement withmonetary bonuses for achieving better than the minimum requirement of anInternational Roughness Index (IRI) of 80 or better.
One of Chester Bross’s first jobs running the new paver was a 14-mi. (22.5 km),four-lane stretch of I-55 in Scott County, Mo., near the city of Sikeston.
see ROADTEC page 48
CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • May 24, 2014 • Page 29
SAVE TIME • SAVE MONEY • SAVE LABOR • SAVE OIL
• No tools required• No expensive
hardware needed• No more rags
stuffed into hoses• No more messy
plastic caps• The ultimate
contamination control tool• One hand installation• Eliminate hydraulic
oil spills & clean up• Quick installation
& ease of usage• Safe for personnel
& environment• Industry acclaimed• 100% Made in USA
For more information contact Mike Pearl at914.980.8890 or email mike @ flangelock.comwww.flangelock.com
Page 30 • May 24, 2014 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
Efficiency Production to Host Municipal Safety Day May 29
In conjunction with theMichigan Rural Water Association(MRWA), Michigan CAT, CherneIndustries, Miss Dig and JackDoheny Company, EfficiencyProduction Inc. is set to host its 8thAnnual Municipal Safety Day onMay 29 from 8 a.m. to 4 p.m. atEfficiency Production’s corporate
headquarters in Mason, Mich. Asin the past, participants atMunicipal Safety Day will qualifyfor MDEQ continuing educationcredits.The agenda for Municipal
Safety Day includes:• Confined space training, pre-
sented by Jack Doheny Company
• New utility location require-ments and training, presented byMiss Dig• Excavation safety training, pre-
sented by Efficiency Production• Backhoe operator training,
presented by Michigan CAT• Hydro-excavation demonstra-
tion, presented by Jack Doheny
Company• Test ball/pipe plug safety, pre-
sented by Cherne Industries• Free lunch and raffle“Municipal Safety Day is
designed specifically for Michigan’spublic works personnel,” said KenForsberg, president of EfficiencyProduction Inc. “It provides a
cross-section of equipment, regula-tion, and best-practice safety pro-cedures and operation.”There is no cost to attend the event.To register, call 989/539-4111.(This story also can be found on
Construction Equipment Guide’s
Web site at www.constructionequip-
mentguide.com.)
Ninety DPW and Water Department workers from more than 36 Michigan municipalities attended EfficiencyProduction and Michigan Rural Water Association’s 2013 Municipal Safety Day.
Efficiency Production’s Mike Ross (L) explains theadvantages and disadvantages of sloping a trench ver-sus using a manufactured trench safety system.
Mid Country Machinery Celebrates New Sioux City Facility
Doug Miller, Mid CountryMachinery store manager.
Keith Kjar, Mid Country Machinery,service manager. Russ Ruhde, Mid Country Machinery parts manager.
Mid Country Machinery recently purchased one of Kobelco’slimited edition SK350LC crawler excavators wrapped in apatriotic/military design. The money went to a WoundedWarrior fundraiser organized by Kobelco.
In addition to its Fort Dodge andWaterloo, Iowa, facilities, MidCountry Machinery has added another
facility in Sioux City, Iowa. The new 15,000 sq. ft. facility in Sioux
City, Iowa, is a full service location offer-ing both sales and rental. Mid CountryMachinery currently has three field serv-ice technicians along with inhousemechanics. The facility is set up withoverhead cranes that have the ability toservice anything from paving equipment,large excavators and loaders, to aerialequipment. Founded in 1997, Mid Country
Machinery is a privately-owned equip-ment dealer where the owners manage theday-to-day business and have developedbusiness relationships based on compe-tency, integrity, and prompt service,according to the company. With a widevariety of equipment, attachments, parts,and service, Mid Country Machinery is aone-stop equipment dealer.
(This story also can be found on
Construction Equipment Guide’s Web site at
www.constructionequipmentguide.com.)
CEG
CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • May 24, 2014 • Page 31
Allis-Chalmers Forest Green HD21 Dozer/Ripper, 1:50
Scale ....................................................................................$80
Allis-Chalmers Orange HD21 Dozer/Ripper, 1:50 Scale $80
Allis-Chalmers Yellow HD21 Dozer/Ripper, 1:50 Scale ..$80
Bobcat A300 Skid Steer Loader, Scale 1:25 ..................$40
Bobcat E35 Compact Excavator, 1:25 Scale ................$50
Bobcat E55 Compact Excavator, 1:25 Scale ................$60
Bobcat M200 Gold Skid Steer Loader, Scale 1:25 ......$30
Bobcat M400 Gold Skid Steer Loader, Scale 1:25 ......$25
Bobcat S510 Skid Steer Loader, 1:25 Scale ..................$65
Bobcat S530 Skid Steer Loader, 1:25 Scale ..................$65
Bobcat S550 Skid Steer Loader, 1:25 Scale ..................$65
Bobcat S570 Skid Steer Loader, 1:25 Scale ..................$65
Bobcat T550 Compact Track Loader, 1:25 Scale ..........$65
Bobcat T590 Compact Track Loader, 1:25 Scale ..........$65
Bobcat T770 Compact Track Loader, 1:25 Scale ..........$45
Case CX210C Excavator, 1:50 Scale ..............................$50
Case CX250C Excavator, 1:50 Scale ............................$195
Case 580 Super “N” WT Backhoe/Loader, 1:50 Scale..$50
Case 885 Motor Grader, 1:50 Scale ................................$45
Case 1102 Vibromax Roller, 1:35 Scale ......................$100
Caterpillar CT660 Day Cab Tractor w/Trail King Lowboy
Trailer, 1:50 Scale ..........................................................$100
Caterpillar D5K2 LGP Track-Type Tractor, 1:50 Scale ..$65
Caterpillar D7E Track-Type Tractor, 1:50 Scale ............$90
Caterpillar D8T Track-Type Tractor, 1:50 Scale ..........$110
Caterpillar D10N Track-Type Tractor, 1:50 Scale ..........$50
Caterpillar D10T Track-Type Tractor, 1:50 Scale ........$100
Caterpillar D11R Track-Type Tractor, 1:50 Scale ........$100
Caterpillar 323D L Excavator, 1:50 Scale ......................$90
Caterpillar 336D L Excavator, 1:50 Scale ......................$95
Caterpillar D350D Articulated Dump Truck, 1:50 Scale $50
Caterpillar 365B L Series II Excavator, 1:50 Scale........$75
Caterpillar 631E Motor Scraper, 1:50 Scale ..................$50
Caterpillar 963D Track Loader, 1:50 Scale ....................$60
Caterpillar 950 GC Wheel Loader, 1:50 Scale ..............$90
Caterpillar 950K Wheel Loader, 1:50 Scale ..................$80
Caterpillar 966K Wheel Loader, 1:50 Scale ..................$95
Caterpillar 966K XE Wheel Loader, 1:50 Scale ............$95
Caterpillar 972K Wheel Loader, 1:50 Scale ..................$95
Caterpillar 977 Traxcavator, 1:50 Scale..........................$60
Caterpillar 988B Wheel Loader, 1:50 Scale ..................$50
Caterpillar 988K Wheel Loader, 1:50 Scale ................$120
Caterpillar 988K w/ Grapple, 1:50 Scale ......................$160
Doosan Moxy MT31 Articulated Truck ........................$100
Hamm GRW 280 Compactor w/Canopy, 1:50 Scale......$90
Hamm 3307 Compact Roller, 1:34 Scale........................$45
Hitachi EH700 Off-Highway Truck, 1:50 Scale ..............$40
International 175 Crawler Loader, 4in1, 1:50 Scale ......$65
International 560 Pay Loader, 1:25 Scale ....................$145
International TD-20E Dozer, 1:64 Scale ........................$24
JCB 3CX Backhoe/Loader, 1:50 Scale ..........................$75
John Deere “BO” Lindeman Crawler Tractor, 1:16 Scale ..
..........................................................................................$70
John Deere 315SJ Backhoe/Loader, 1:50 Scale ..........$45
John Deere 460E Articulated Truck, 1:50 Scale............$70
John Deere 850K Dozer, 1:50 Scale ..............................$65
Komatsu D51 PX Dozer, 1:50 Scale................................$85
Komatsu D51 EX Dozer, 1:50 Scale................................$85
Komatsu D65PX-17 Dozer, 1:50 Scale ..........................$80
Komatsu D375 A Dozer, 1:50 Scale ..............................$125
Komatsu HD605 Off-Highway Truck, 1:50 Scale ..........$80
Komatsu HM250 Articulated Dump Truck, 1:50 Scale..$75
Komatsu HM400-3 Articulated Truck, 1:50 Scale........$100
Komatsu PC14R Mini-Excavator, 1:32 Scale ................$45
Komatsu WA500 Wheel Loader, 1:50 Scale ..................$80
Komatsu WB146 Backhoe/Loader, 1:50 Scale ..............$75
Komatsu Mack Granite MP w/Lowboy Trailer, 1:50 Scale ..
..........................................................................................$90
Link Belt 210X3 Excavator, 1:50 Scale ..........................$45
Northwest 25D Backhoe, 1:50 Scale ..............................$60
Northwest 25D Shovel, 1:50 Scale ................................$75
Terex TR60 Off-Highway Truck, 1:50 Scale ................$160
Vogele MT3000 Powerfeeder, 1:50 Scale ....................$140
Vogele Super 700 Small Paver, 1:50 Scale ....................$80
Vogele 1900 Tracked Paver, 1:50 Scale ......................$125
Vogele Vision 5200-2 Tracked Paver, 1:50 Scale ........$115
Volvo L220G Wheel Loader, 1:50 Scale ......................$120
Volvo 6870 Wheeled Asphalt Paver, 1:50 Scale ............$90
Wirtgen W250i Cold Milling Machine, 1:50 Scale........$160
Wirtgen WR240 Recycler, 1:50 Scale ..........................$140
Shipping and Handling Included
Contact – Barry McKeon800-523-2200 Ext. 197 • 610-506-5961 Cell
Email – bmckeon@cegltd.com
CEG Scale Models470 Maryland Drive
Fort Washington, PA 19034Visit our Ebay Store – bmckeon collectibles – for a complete list with pictures.
Euclid R-35 Quarry Truck (Conrad), 1:50 Scale $200Caterpillar 972K Wheel Loader, 1:50 Scale $95Caterpillar 950K Wheel Loader, 1:50 Scale $80
Toys For Boys(and also men)Realistic Scale Models of Construction Equipment, ideal gifts for the Holidays, Birthdays, Graduation, etc.
Page 32 • May 24, 2014 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
Terex Fuchs Material Handlers Assist All Metals MarketPeople often think fondly about
how business used to be conduct-ed. A day where a person’s wordwas his or her bond, a handshake isall it took to complete a deal andserving the customer was, aboveall else, the primary objective.While other companies have
long forgotten about this businessstyle, Kevin Yount and All MetalsMarket (AMM) of Fremont, Neb.,still put this into practice. Fromwalking curious customersthrough its scrap training and edu-cation facility to assisting peddlertraffic through the drop-off processto offering quick turnaround con-tainer service for its commercialcustomers, AMM’s mission is toprovide superior customer service.“We make sure we have a cus-
tomer-friendly operation and walkanyone through the process,”explained Yount, owner of AMM.“This gives them a reason to comeback.”For its commercial customers, if
there is a company from Omaha toLincoln generating scrap, AMMhas a roll-off container there.Whereas other companies take thephilosophy of picking up a fullcontainer when it fits into theirschedule, AMM is much moreproactive. “We have 15 trucks dedicated to
this service and make sure we turna container within 24 hours ofreceiving a call that it is full,” saidYount. While this type of business phi-
losophy may seem a little old-fash-ioned based in today’s businessenvironment, there’s nothing old-fashioned about its results. Thecompany has experienced signifi-cant growth, especially since the2007-08 timeframe.When Yount took over the busi-
ness in 1987 from his retiringfather, who started AMM as a sidebusiness, Kevin was the onlyemployee. For the first few years, itwas a good day to see 2 to 3 truckscome into the yard along with localpeddler traffic. “But today we receive up to 20
of our containers and five to tentrailers each day,” said Yount, andthe business is poised for futuregrowth. Although growth is good, it
begins to show areas where anincrease in efficiency is required tomaintain the desired level of cus-
tomer service. One area requiringimprovement for AMM was inhow it handled its scrap material. “The short reach of the excava-
tors at the yard hindered operatorsfrom keeping up with the inflow ofmaterial,” explained Jay Young,scrap and recycling sales managerof Roadbuilders Machinery andSupply Company, an authorizeddistributor of Terex Fuchs equip-ment. “They were handling materi-al two and three times before pro-cessing it and that wasn’t effi-cient.”
Long Reach, More EfficientOf greater concern facing AMM
with increased material inflow,operators had to stack materialhigher. This made visibility anissue, as stockpiles of scrap grewand high-wall trucks deliveredmaterial more frequently, which
demanded efficient unloading. Theconverted excavators on the yardoffered limited elevated vision,which did not help the situation.Yount worked with
Roadbuilders Machinery to find apurpose-built material handlersolution that would more efficient-ly offload high-wall trailers andstockpile material. “After discussing his needs, we
determined that the Terex FuchsMHL350 D material handler wasthe right fit for the operation,”recalled Young. One change from the tracked
excavators on the yard, the newmaterial handlers had a rubber tiredrive system. As AMM transi-tioned more of the yard from ahard aggregate base to concrete, atire machine was the right choice. “Plus,” said Yount, “the material
handlers with tire drive get aroundthe yard quickly, and they can picka considerable amount of weight.”The primary benefit for AMM,
however, turned out to be machinereach. “We bought the MHL350 D
handler for its reach,” added Yount.This model offers a standard 52.5-ft. (16 m) reach, nearly twice as faras the excavators on AMM’s yard.This extended reach enabled theprocessor to reduce the number oftimes the scrap material was han-dled, boosting efficiency.As an added bonus, AMM’s
operators discovered significantbenefits of switching to a materialhandler that offered an elevatedcab design. The MHL350 D han-dler features a hydraulically
Starting as a one-man operation, All Metals Market has experienced significant growth since 2007.
see TEREX page 64
Recently, the company entered into a contract to process out-of-spec metal tubes, and up to five truckloads of the recyclable mate-rial enters the yard each day.
All Metals Market added a 2,000-ton (1,814 t) guillotine shear anda third Terex Fuchs MHL350 material handler to efficientlyprocess the out-of-spec metal tubes.
To keep up with increasing material inflow, All Metals Marketswitched to Terex Fuchs MHL350 material handlers, which offerlonger reach and improved efficiency compared to the excavatorspreviously used.
CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • May 24, 2014 • Page 33
Hydrema US
proudly welcomes
Ohio Cat
as the newest
member of our
dealership family.
Talk to the compact Dump Truck specialist
Hydrema US Inc. Reg. Business ManagerThomas Hartman
Phone: (470) 362-8618tha@hydrema.comwww.hydrema.us
ARTICULATED. HIGHLY MOBILE.
LOAD CAPACITY 22.000 LB.
LOW GROUND PRESSURE.
HIGH QUALITY.
855-44TITANtitanmachinery.com
PARTS • SERVICE • RENTALS • SALES
PUT THE POWER OF TITAN to work for you
Page 34 • May 24, 2014 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
Attendees Participate in Raffles,Money Goes to Joliet Area Hospice
(L-R): Don Williams, Tony Pesavento, Ken Kelly and Eric Cox, all of DLZ.
(L-R): Tom McGann, Timm Electric, gets registered for the CAWGCAnnual Meet & Greet Expo and says hello to Karri Lane and MaryEllis Metz, both of CAWGC.
Representing Henry Bros. Co. areJoe Bartkus and Mary Hansen.
(L-R): Working the grill and keeping everyonewell fed are Bob Dehm of Baish Excavating,Bob Baish, president of Baish Excavating, andDan Byrnes of Underground Pipe & Valve Co.
Wayne Massad (L), West Side Tractor, and TedStipanovich of Stip Brothers Excavating network atthe Meet & Greet Expo.
Efficiency Shoring & Supply was well staffed at the annualMeet & Greet Expo. (L-R): Kevin Vollmer, Mark Mitchell, BlakeStevens and Sean Kerrins.
Tom Stern (L), sales manager of WestSide Tractor Sales, talks John Deere ironwith Rick Rahn of Austin-TylerConstruction Inc.
Steve Costello (L), McCann Industries, talksCase skid steers with John Young of SeasonsLandscaping.
Illinois Truck & Equipment Sales Representative Nick Stipanovich(L) and Mike Riotte in front of the Kawasaki 70 wheel loader.
CAWGC from page 12
The CT681 is powered by a Cat CT Series vocational truck engine and is available with the Cat CX31 auto-matic transmission.
Caterpillar Expands Heavy-Duty LineWith Cat CT681 Vocational TruckCaterpillar has expanded its
heavy-duty line of Class 8 worktrucks with the introduction of theCat CT681 vocational truck, a set-forward axle model designed for cus-tomers who prefer a longer wheel-base truck and for those who mustcomply with restrictive load limita-tions on bridges and roads. TheCT681 joins the CT660, which has aset-back front axle, in the Caterpillarline of vocational trucks.The CT681 has been working in a
variety of field testing applicationssince the third quarter of 2013. Thisextensive field follow program —the equivalent of more than threeyears of truck use — involves morethan a dozen customers across NorthAmerica. Applications include snowplow, concrete mixer, water truck,
dump and super dump.“Customers who are hauling
heavy loads or working in extremeconditions truly appreciate theCT681’s rugged durability andstyling,” said Dave Schmitz, globalon-highway truck product manager.“We designed it to work hard and lastfor years, even in the toughest appli-cations.”Featuring a 114-in. (290 cm)
bumper-to-back-of-cab (BBC), theCT681 is powered by a Cat CTSeries vocational truck engine and isavailable with the Cat CX31 auto-matic transmission. An optional frontframe extension (FFE) along with afront engine PTO (FEPTO) makes iteasy to mount attachments such assnow plows, hose reels, winches andhydraulic pumps. Mixer installation
also is simplified, due to vertical tie-in plates mounted behind the cab.The CT681 also shares many
common features and componentswith the CT660, the first model in theCaterpillar vocational truck line,including a spacious, ergonomic cabdesigned to boost driver productivityand safety. Like all Cat products, it’sbacked by bumper-to-bumper serv-ice at more than 400 Cat dealer loca-tions in North America. Full produc-tion of the CT681 is expected in mid2014.For more information, visit
www.drivecat.com.(This story also can be found on
Construction Equipment Guide’s Web
site at www.constructionequipment-
guide.com.)
Pages 35-45To view our current comparison trailer specification charts visit www.constructionequipmentguide.com
SECT IONTrucks & Trailers
NTEA Celebrates50 Years in WorkTruck IndustryThe NTEA, the Association for the Work Truck Industry, is
celebrating 50 years of serving the work truck industry. The association started in 1964 in Cincinnati, Ohio, as the
Truck Equipment & Body Distributors Association with sixmember companies. In 1978, the growing association movedto its current headquarters in suburban Detroit, the heart of thenation’s automotive industry. In 1979, based on its changingindustry-wide perspective and service offerings, changed itsname to the National Truck Equipment Association, or theNTEA.The legislative office opened in Washington, D.C., in 1988
to represent member interests on Capitol Hill.The NTEA, now 1,600 member organizations strong, is the
leading organization representing the work truck industry. Through the years, the association has grown its capabili-
ties to include:• Technical services for engineering, installation, compli-
ance and certification support• Advocating on behalf of the work truck industry to pro-
tect and advance the industry’s regulatory and legislativeinterests• Enhancing our market data and research offerings to help
member businesses succeed• Offering education, training and networking opportunities• Delivering industry information on demand“We’re dedicated to continue representing the hard work-
ing group of individuals and companies who have helpedbuild the association and the industry into what it is today,”said Steve Carey, NTEA executive director. “As we begin ournext 50 years, we will continue to provide the tools and serv-ices to help our members succeed.”The celebration will culminate during The Work Truck
Show 2014, North America’s largest work truck event, March5 to 7, 2014, at the Indiana Convention Center in Indianapolis,Ind. The Work Truck Show ranks among Trade ShowExecutive magazine’s Gold 100 Honorees, Class of 2013. In recognition of NTEA’s 50-year celebration, NTEA
members have contributed historical images of their busi-nesses through the years — showcasing the work truck indus-try’s evolution from the 1960’s to modern times.For more information, visit www.ntea.com.(This story also can be found on Construction Equipment
Guide’s Web site at www.constructionequipmentguide.com.)
Page 36 • May 24, 2014 • www.constructionequipmentguide.com • Trucks & Trailers Section • Construction Equipment Guide
Ervin Set to Sell Wabash DuraPlate Trailers From J.B. HuntErvin Equipment Inc., Toledo,
Ill., has purchased 2,000 pre-owned Wabash Duraplate trailersfrom J.B. Hunt Transport Inc., aleading provider of logistics man-agement and transportation servic-es. Customers can purchase thetrailers as they are at any of Ervin's12 locations, or Ervin can adjustthem on location to meet buyers’specific needs. Ervin’s U.S. sites cover 75 per-
cent of the country to provide easyaccessibility for 90 percent of thecountry’s trucking companies. Thecompany’s business model allowsit to buy and accept delivery oflarge quantities of trailers in onetransaction. J.B. Hunt, meanwhile,is able to drop trailers in multiplelocations. The combination is whathas made the Ervin-J.B. Hunt rela-tionship so easy for both compa-nies for many years.Jeff Weber, Ervin’s vice presi-
dent of sales and marketing, saidthat because Ervin can store equip-ment in or close to customers’
facilities, the Wabash trailers willbe a staple in a variety of storageand basic cartage applications formanufacturers, particularly thosethat perform short, regional hauls. “It has become difficult to
obtain pre-owned equipment inand around a desired location in a
short period of time, but our com-pany was founded to address theseglitches,” he said. “We created afast, fluid process that works forour customers, guaranteed.“We’re proud of the fact that one
of the best trucking companies inthe U.S. trusts Ervin and relies on
us to buy its good, used equip-ment,” Weber said. “They continuedoing business with us because itssimple, easy and convenient.”Prior to selling any of the trail-
ers, Ervin will check them thor-oughly to ensure they exceed allfederal requirements for equip-
ment running in the United States. For more information, call
877/873-6863 or visit www.ervi-nusa.com.
(This story also can be found on
Construction Equipment Guide’s
Web site at www.constructionequip-
mentguide.com.)
Ervin Equipment has purchased 2,000 pre-ownedWabash Duraplate trailers from J.B. Hunt Transport.
DuraClass HPT Dump Body Provides Durability, StrengthThe DuraClass HPT heavy-duty dump
body provides hauling contractors durability,strength and high payload capacity. With itsinterlaced understructure and vertical sidebraces, the HPT is built to improve produc-tivity and provide high durability. Like allheavy-duty DuraClass dump bodies, theHPT uses high tensile steel throughout foradded strength and lighter body weight thancomparable dump bodies, according to themanufacturer.Available in lengths from 13- to 17-ft. (4
to 5 m), the DuraClass HPT features fullyenclosed front corner posts. DuraClass bod-ies also come with full depth corner postsand enclosed tailgate hardware. The HPT’sgreaseable rear hinges have wide bearingsurface and large pin diameter. Numerous body options are available
including a sloped tailgate, reverse asphalttaper, sloping side panels, hi-lift tailgate,dual action side swing tailgate, body sidesteps and handles, sliding door options andair operated hoist controls. Custom side andtailgate heights and custom body bracingalso are available. DuraClass manufactures avariety of accessories for the HPT, includingpatch gates, cab shields, ladders, LED lights,spill aprons, and tarp rods and walk rails.Additionally, DuraClass offers a line of
HPT hoists. The hoists allow for anincreased capacity as a result of high-pres-sure hydraulics and increased productivitywith faster cycling. Furthermore, the hoistsoffer better stability with a low center ofgravity and strong pin design. HPT hoistshave improved longevity with hard chromeplated hoist sleeves.Other heavy-duty models from DuraClass
are available in many different grades ofsteel, stainless and aluminum with configu-rations and options to meet the specificationsand demanding uses of municipal and con-struction contractors.The HPT-316 takes style to a new level
with its sleek, clean body lines. The cross-memberless design is easier to keep clean inharsh environments where slush and saltbuildup take their toll on hard-workingequipment.The HPTB, “tub”, design provides for
enhanced payload-to-weight ratio with allthe necessary strength and stability for heavyhauling, according to the manufacturer.The HPT-AL is a full aluminum design.
Fifty percent lighter than a comparable steeldump body, the HPT-AL offers increasedcorrosion resistance and payload capacityand minimizes fuel, brake and tire expense.All heavy duty dump bodies from
DuraClass feature a body sidewall that isshaped into a continuous completelyenclosed top rail, side and running boardconfiguration, eliminating the outside weldbelow the tarp rail and preventing moistureand freeze problems.
For more information, call 800/255-4345or visit www.duraclass.com.
(This story also can be found on
Construction Equipment Guide’s Web site at
www.constructionequipmentguide.com.)
Numerous body options are available including a sloped tailgate,reverse asphalt taper, sloping side panels, hi-lift tailgate, dualaction side swing tailgate, body side steps and handles, sliding
door options and air operated hoist controls.
Construction Equipment Guide • Trucks & Trailers Section • www.constructionequipmentguide.com • May 24, 2014 • Page 37
Vermeer Sales & Service
1675 126th St. WestBurnsville, MN 55337
952-890-6144Fax: 952-882-2980
www.vermeerofminnesota.com
Midwest Trailers Plus, Inc.548 29th St. West
Des Moines, IA 50265515-223-8463
Toll Free: 888-560-2787Fax: 515-223-6446
www.midwesttrailersplus.com
Farm-Rite Equipment Inc.
901 Parker Ave WestPO Box 26
Dassel, MN 55325320-275-2737
Toll Free: 888-679-4857www.farmriteequip.com
K.C. Bobcat2209 W. 40 Highway
Blue Springs, MO 64015800-697-4228816-229-7631
Olathe, KS800-598-4228Platte City, MO800-984-3001
McCann Industries, Inc.
Addison543 South Rohlwing Road
Addison, IL 60101630-627-0000 • Fax: 630-627-8711
Bolingbrook250 East Frontage RoadBolingbrook, IL 60440
630-739-7770 • Fax: 630-739-7699Chicago
2350 South Laflin StreetChicago, IL 60608
312-942-9200 • Fax: 312-421-3502Crestwood
4701 West 137th StreetCrestwood, IL 60445
708-597-3110 • Fax: 708-597-9945
McHenry4102 W. Crystal Lake Road
McHenry, IL 60050815-385-0420 • Fax: 815-385-2975
Schererville1133 Indianapolis Boulevard
Schererville, IN 46375219-865-6545 • Fax: 219-865-0269
Wauconda1360 North Rand Road
Wauconda, IL 60084847-526-9444 • Fax: 847-526-9448
www.McCannOnline.com
Titan MachineryShakopee Division
6340 Hwy 101Shakopee, MN 55379
952-445-5400 • 800-795-9274Fax: 952-445-0365Duluth Division4311 Haines Rd.
Hermantown, MN 55811218-727-3038 • 800-795-0117
Fax: 218-727-2827Rogers Division
14375 James Rd.Rogers, MN 55374
763-428-5099 • Fax: 763-428-5051Industrial Division
N1626 Wuensch Rd.LaCrosse, WI 54601
608-788-1025 • 800-780-1025Fax: 608-788-1027
Page 38 • May 24, 2014 • www.constructionequipmentguide.com • Trucks & Trailers Section • Construction Equipment Guide
Rogers Trailer OffersMultiple Configurationsfor Specialized HaulerAnchor36 Trucking LLC, locat-
ed in Kenner, La., specializes intransporting oversize, overweightand difficult loads. In order tomaximize its ability to haul a widevariety of specialized loads,Courtney Brauninger, presidentand co-founder of the company,approached Rogers BrothersCorporation with a request for adesign that would allow it toreconfigure a single trailer for mul-tiple purposes. Rogers manufactured a trailer
with interchangeable platform andI-beam decks. A drop-side deckcan be added at a later date.Because Anchor36 focuses on theconstruction industry, a “bucket
pocket” and “boom trough” werebuilt into the platform deck to nes-tle excavator’s booms and bucketsfor increased overhead clearance.Rogers’ new CobraNeck, multipleride height gooseneck is enhancedby a 72 in. (183 cm) gooseneckextender for a 3-axle jeep dolly.The rear frame has removable/flip4th and 5th axles with air lift on the3rd axle and a self-equalizing“nitro” spreader. Depending on theconfiguration, the trailer is rated ateither 90 or 70-ton (81 or 63 t)capacity.For more information, call
800/441-9880 or visit www.roger-strailers.com.
(This story also can be found on
Construction Equipment Guide’s
Web site at www.construc-
tionequipmentguide.com.)
Rogers modular trailer meetsthe needs of specializedhaulers.
Construction Equipment Guide • Trucks & Trailers Section • www.constructionequipmentguide.com • May 24, 2014 • Page 39
JEFF BELZER’SJEFF BELZER’SLAKEVILLE, MN
CHEVROLET
A POWERFULWORKFORCE
CALL FOR
SPECIAL PRICING
FOR MNLA-AGC-NAHB
MEMBERS ON
SELECT VEHICLES
Vehicles ready for work at a moment’s notice. Professionals trained to keep business owners happy. Service facilities equipped for commercial applications. As a Chevy Business Central dealer, we’re all business.
COMMERCIAL HEADQUARTERSJeff Belzer Chevrolet, 50 & Cedar, BX 965 Lakeville, MN
Please Call the Commercial Dept, 1-866-247-4847 OR 952-469-4444All Rebates & Incentives to Dealer, Must Qualify for Same, Prices Subject to Change
©2009 General Motors
George Miller 952-469-6820gmiller@jeffbelzer.com
John Zadurski 952-469-6817jzadurski@jeffbelzer.com
20 2500/3500 Vans in Stock, from $24,999. 2014 K3500 4x2 chassis 84 c/a, gas, posi,sno prep, from $26,999.
Cube, 4-12’ Cutaways, In Stock 12’ Flatbed, Gas, 4x2
84 C/A, Gas, 4x4, 11’ Tipper 2014 k3500 crew long box, wt, 6.0 gas, hasto go $33,299, plus ttl, 16 2014 HD Crewsin Stock
2014 k2500, ready for plow, call for pricing.
2 crew gas 4x4’s, chassis, inbound, call forinfo.
Page 40 • May 24, 2014 • www.constructionequipmentguide.com • Trucks & Trailers Section • Construction Equipment Guide
Kenworth Truck Names New2014 Parts Council MembersKenworth Truck Company has named its
2014 Kenworth Parts Council members. Thecouncil consists of leading parts managersfrom Kenworth dealerships in the UnitedStates and Canada. The council is dedicatedto enhancing the quality of parts and cus-tomer support to truck fleets and owner-operators.Kenworth Parts Council members are:
Chairwoman — Jo Frost, EdmontonKenworth, Edmonton, Alb.; Ken Ables,Performance Kenworth, Cleveland, Texas;Paul Baker, Wallwork Kenworth, Fargo,N.D.; Samuel Letendre, Kenworth Maska,La Presentation, Que.; Lisa Nichols,Kenworth of Columbus, Hilliard, Ohio; VicStiller, Inland Kenworth, Phoenix, Ariz.; JeffWeaver, Truckworx Kenworth,Birmingham, Ala.; Clayton Zuchotzki,GreatWest Kenworth, Calgary, Alb.; andKenworth Dealer Council representativeMike Murphy, MHC Kenworth, Leawood,Kan.“The Kenworth Parts Council plays an
important role in working with Kenworthand PACCAR Parts to help provide our cus-tomers with excellent parts support through-out the United States and Canada. We appre-
ciate their diligent efforts in this essentialmission,” said Steve Smith, national salesmanager of PACCAR Parts/Kenworth.Kenworth dealers offer genuine
Kenworth proprietary parts and provide all-makes parts and service through more than345 locations in the United States andCanada. Kenworth dealers also offer TRPaftermarket products. To help support customers, Kenworth
provides a complete dealership list on itsWeb site. There also is a Kenworth dealermobile app for convenience on the road. Inaddition, the Kenworth PremierCareCustomer Center (1-800-KW-ASSIST) isopen 24 hours a day, seven days a week. Theservice requires no registration fee for emer-gency roadside assistance and is available toany truck brand. The Kenworth PremierCareCustomer Center handles emergency road-side assistance calls and schedules servicefor preventive maintenance customers,among other services.For more information, visit www.ken-
worth.com.(This story also can be found on
Construction Equipment Guide’s Web site atwww.constructionequipmentguide.com.)
Construction Equipment Guide • Trucks & Trailers Section • www.constructionequipmentguide.com • May 24, 2014 • Page 41
#1Chrysler Corp. Commercial
Dealer in Minnesota
We Deliver!
The fast lane for small business.
18 Cabs and Chassis in Stock
More Coming!RAM H.D. HEADQUARTERSFURY MOTORS South St. Paul, Minnesota
Truck Master Dick Reineck • 651.251.8214 direct • rreineck@furymotors.com * Pricing represents all Denver business center rebates deducted!
32 Promasters Ready to Go!
2014 Ram 55004x4, PW, PL, Tilt, Cruise, 220 Amp Alt, HD Plow
Pck. Hd Frt. Axle Beau Roc Hd Dump 11’6”MSRP $66,065
$avings $ale $57,099*
2014 Ram Caravan CargoP/W, P/L, T/C, A/C
MSRP $23,310
$avings $ale $18,499*
Promaster 1500FWD V/6 Auto, P/W, P/L, T/C, A/C
MSRP $31,025
$avings $ale $28,579*
Choose from 32
2013 Ram 35004x4, Cab & Chassis, Knapheide Flatbed
& Boxes, PW PC HC A/C GC AT
MSRP $45,946
$avings $ale $37,997*
2013 Ram 3500Crew 4x4 Dually AIS A/T 850 Cummins P/W,
P/L, T/C, A/C, Bedliner
MSRP $53,930
$avings $ale $44,113*
2013 Ram 5500Cab & Chassis, 4x4 P/W, P/L,
T/C, A/C, PTO
MSRP $50,620
$avings $ale $42,870*
Choose from 2
2013 Ram 55004x2 Standard Cab, PW, PL, Tilt Cruise, PTO,
220 Amp Alt, HD Pck and MoreMSRP $48,845
$avings $ale $39,999*
2013 Ram 3500Crew Laramie 4x4 Aisan Trans 850 Cummins
20600 Towing, Too much to list, 5 in stockMSRP $66,000
$avings $ale $55,999*
2 Left!
Choose from 7
2013Model EndClearanceSOLDSOLD
THEY GOTTA GO!
Page 42 • May 24, 2014 • www.constructionequipmentguide.com • Trucks & Trailers Section • Construction Equipment Guide
Construction Equipment Guide • Trucks & Trailers Section • www.constructionequipmentguide.com • May 24, 2014 • Page 43
2014 FONTAINE 18” DECK HT�,53’ x 102” x 18”, 275/70R22.5 Tires,Magnitude 55L, 26’ Deck, HendricksonA/R w/ Auto & Manual Controls, Air Lift3rd Axle, Set Up For Wet Line, Set UpFor Future 4th Flip Axle, LED StrobeLight w/ Battery Backup, (12) Pair ofOutriggers, Steel Whls, Price IncludesFET, Stk #FT045 ................$74,600
JEFF BELZER’SDodge Ram Tough
Vehicles ready for work at a moment’s notice. Professionals trained to keep business owners happy. Service facilities equipped for commercial applications.
COMMERCIAL HEADQUARTERSJeff Belzer Ram Dodge, 21111 Cedar Ave., Lakeville, MN
Please Call the Commercial Dept, 1-877-671-8226 OR 952-469-4444All Rebates & Incentives to Dealer, Must Qualify for Same, Prices Subject to Change
George Miller 952-469-6820gmiller@jeffbelzer.com
John Zadurski 952-469-6817jzadurski@jeffbelzer.com
Gas-2500, Ready for Plow 2014 Ram 5500 4x4, 84” c/a, Sno-prep, Power Group, From $42,999
2 ram 5500 4x4 108 c/a.please call for spec
NEW PROMASTERS HERE & IN TRANSIT
www.ZipsTransportEquipment.com
Smartphone Users
Visit Us Online(800) 222-6047
TrailMax FWTD-70-PR8 degree load angle with 33" deck height
XL Specialized XL-70-HDG13HP Honda Motor with aluminum pullouts
Smart Body SBMT Construction Service BodyModular, Extra Large Toolboxes, Gooseneck Ball,Transfer Tank, Aluminum Deck, Customizable
Excellent for Pavers!
HydraulicDetachableGooseneck
Design Your UltimateWork Truck!
Page 44 • May 24, 2014 • www.constructionequipmentguide.com • Trucks & Trailers Section • Construction Equipment Guide
Mitsubishi Fuso Introduces NewHigher-GVWR Class 3 Work Truck
The Mitsubishi Fuso Truck ofAmerica Inc. (MFTA) Canter FE130work truck boosts GVWR andbody/payload capacity by 700 lb.(317.5 kg) over the previous FE125model.According to the company, the boost
in GVWR is actually the second part ofa program to expand the utility and ver-satility of its Class 3 offering. In mak-ing the introduction, Todd Bloom,MFTA’s president and CEO, said,“Strategically, this new truck is a directresult of our continuing efforts toimprove and refine our products to pro-vide increasing value to FUSO owners.We added a long-wheelbase option toour 2014 model FE125 as a runningchange in the fall of 2013. The new169.3 in. wheelbase option allowsinstallation of 20 ft. bodies — whichgreatly expanded the cargo volumecapabilities of our lightest truck. Forour customers who transport high-bulkitems, this is a real benefit. But thosewho haul heavier items could only takeadvantage of the longer wheelbase ifthe GVWR also increased. And that’swhere the new FE130 comes in.”Model designations for FUSO com-
mercial trucks are derived from theirGVWRs. The GVWR for the newFE130 is 13,200 lb. (5,987 kg), com-pared to 12,500 lb. (5,670 kg) for thetruck it replaces, while Individual axleratings for the new FE130 — 5,360 lb.(2,431 kg) front and 9,880 lb. (4,481kg) rear — sum to 2,040 lb. (925 kg)
more than the FE130’s GVWR.According to Leighton Good, MFTAmanager of product and applications,“That GVWR-to-axle-rating marginprovides the loading flexibility for theFE130 that FUSO owners have cometo rely on and expect.”The company notes that a 700 lb.
increase in body/payload capacity, par-ticularly when coupled with the long-wheelbase option, significantlyimproves the efficiency of the truck,allowing the operator to carry more ineach trip, and thereby reducing overalltransportation costs.The Canter FE130 also offers a
number of other improvements, fore-most among them a performanceincrease to go along with the increasedGVW rating.According to Good, “While the
horsepower and torque rating of theengine haven’t changed, MFTBC engi-neers have been able to make refine-ments to the programming that man-ages the complex interactions amongengine operating parameters, transmis-sion shift points and emissions controlsystem behavior. As a result, the newFE130 will outperform an equivalentFE125, not only in acceleration from astop and while underway, but also inresponsiveness at steady speeds andduring deceleration. At the same time,the truck remains in full compliancewith OBD II and EPA 10 emissionsrequirements.”Additionally, to simplify daily
checks, the company said it will bemaking a running change early in themodel year to relocate the engine oildipstick to the driver side and positionit to allow the oil to be checked withouttilting the cab. The new dipstick loca-tion is intended to encourage Canterowners and operators to perform theregular pre-trip fluid checks it recom-mends as an integral part of a profes-sional maintenance program.In another nod to human nature and
improved serviceability, the companyis changing the DEF tank cap color tobright blue to reduce the risk of some-thing other than diesel emissions fluidbeing added to the DEF tank.According to Bloom, though, the
single greatest advantage of the newFE130 is its increased load-carryingcapacity, regardless of vocation. “That 700 additional pounds,” he
said, “means two more zero-turn land-scaper mowers or 700 lb. more mulchper trip. Or 33 additional cases of soda,560 loaves of bread or 1,806 bananas.And that’s what the new FUSO CanterFE130 is all about. Helping businessesthrive by giving them a lower cost-of-ownership alternative for their trucktransport needs.”For more information, visit mitfu-
so.com/en-US/Models.(This story also can be found on
Construction Equipment Guide’s Web
site at www.constructionequipment-
guide.com.)
The Canter FE130 work truck boosts GVWR and body/payload capacity by 700 lb. (317.5 kg) over the previousFE125 model.
AIS ConstructionEquipmentCorporation
3600 North Grand River AvenueLansing, MI 48906
517-321-8000Fax: 517-321-6275
600 44th Street S.W.Grand Rapids, MI 49548
616-538-2400Fax: 616-538-0449
65809 Gratiot AvenueLenox, MI 48050
586-727-7502Fax: 586-727-7311
4600 AIS DriveP.O. Box 253
Bridgeport, MI 48722989-777-0090
Fax: 989-777-1583
8300 M-72 EastWilliamsburg, MI 49690
231-267-5060Fax: 231-267-5257
56555 Pontiac TrailNew Hudson, MI 48165
248-437-8121800-457-8121
www.aisequip.com
949 3rd Ave.Windom, MN 56101
507-678-2752
Ditch Witch ofNorth Dakota1100 W. Main Ave.West Fargo, ND 58078
701-282-3600877-282-3600
Fax: 701-282-3636
2921 Twin City Dr.Mandan, ND 58554
701-663-9551877-663-9551
Fax: 701-663-0692
3660 Interchange RoadColumbus, OH 43204
614-443-9751888-DITCHWITCHFax: 614-443-9219
www.ditchwitchOH.com
9052 Marshall RoadCranberry Township, PA 16066
724-742-2844888-DITCHWITCHFax: 724-742-2877
www.ditchwitchPA.com
Vermeer Sales & Service661 Hwy T14Pella, IA 50219866-483-7633
Fax: 641-628-4283
Vermeer Siouxland4858 D. Ave.
Marcus, IA 51035712-376-2310
Fax: 712-376-2312
Vermeer of Eastern Iowa101 Commerce Blvd.Tipton, IA 50219563-886-2444
Fax: 563-886-2223www.vermeeriowa.com
Construction Equipment Guide • Trucks & Trailers Section • www.constructionequipmentguide.com • May 24, 2014 • Page 45
6140 Highway 10 NWAnoka, MN 55303
763-323-1720 888-448-5266
Fax: 763-422-3949
3021 West 133rd Shakopee, MN 55379
952-445-6310 Fax: 952-496-0263
23580 Highway 55 Loretto, MN 55357
763-479-8200 Fax: 763-479-8201
1015 Highway 212 WestNorwood Young America, MN
952-467-2182Fax: 952-467-3259
901 Parker Ave. W.Dassel, MN 55325
877-570-2740www.farmriteequip.com
Scharber & Sons, Inc.13725 Main Street Rogers, MN 55374
763-428-4107 Fax: 763-428-2700 www.scharbers.com
1929 E. Madison Ave.Mankato, MN 56001
507-387-7376Fax: 507-387-7399
1400 W. Ogden Ave.Naperville, IL630-355-7150
310 W. 162 St. Rt. 6South Holland, IL
708-331-6362
3110 Prairie Rd.Rockford, IL
815-961-3160
1560 North Old Rand Rd. Wauconda, IL847-526-7700
600 Walnut CtRockdale, IL
815-730-9011
2170 South Yost Ave.Bloomington, IN 47403
812-333-9677Fax: 812-333-9731
5400 Industrial Rd.Fort Wayne, IN 46825
260-482-8576Fax: 260-483-4057
7355 East 30th St.Indianapolis, IN 46219
317-544-3411
Lafayette, IN 47905765-477-6933
Fax: 765-448-9038
South Bend, IN 46619574-232-1461
Fax: 574-233-3324
www.westsidetractorsales.com
Page 46 • May 24, 2014 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
Kubota’s new B50 Series makes it easy to get comfortable with a variety of jobs around your property. Industry leading features include a spacious, fully integrated deluxe cab, and clean,
low emission high torque 26-33 HP engines. Plus, a full range of performance matched implements, including quick-attach loader and backhoe. Class leading comfort and
premium performance, at your local Kubota dealer.
New B50 Series: Get Comfortable with Your Work
www.kubota.comOptional equipment may be shown.©Kubota Tractor Corporation, 2013
2216 N. Green Bay Rd.Waukegan, IL 60087
847/336-1205Fax 847/336-2697
27939 W. Concrete Dr.Ingleside, IL 60041
815/363-4100Fax 815/363-4109
2001 Cherry Hill Rd.Joliet, IL 60433815/464-6650
Fax 815/464-6951
Burris Equipment Co.Anoka, MN
888/448-5266753/323-1720Shakopee, MN877/753-6100952/445-6310
Corcoran, MN888/479-4342763/479-8200
Lano Equipment, Inc.2202 S. High Cross
RoadUrbana, IL 61802
800/798-1772Fax: 217/337-1775
2900 E. Jackson St.Macomb, IL 61455
888/360-9225
200 North St.Prophetstown, IL 61277
877/221-0881
Birkey’s Construction Equipment124 N. Schmale Rd.Carol Stream, IL 60188
630/510-6050Fax 630/510-6051
1305 Sentry DriveWaukesha, WI 53186
262/521-5802Fax 262/521-5801
1st Choice Equipment LLC
3333 W. Coliseum Blvd.Fort Wayne, IN 46808
260/483-8868
4951 West 96th StreetIndianapolis, IN 46268
317/872-4877www.southeasternequip.com
Southeastern EquipmentCo., Inc.
CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • May 24, 2014 • Page 47
When our customers sound off,we listen. So when you asked usto turn down the noise and turnup productivity on our reimagined550K, 650K, 700K, and 750KCrawler Dozers, we respondedwith a noticeably quieter, morespacious cab. A hydraulic-drivenfan that further reduces noise,while saving fuel. And a morepowerful Interim Tier 4 diesel.Plus the unsurpassed operatingease and maneuverability you’vecome to expect. To hear moreabout why these dozers are asound choice, see your Deeredealer.
WE HEAR YOU LOUD AND CLEAR.
Saginaw4600 AIS DriveP.O. Box 253
Bridgeport, MI 48722989/777-0090
Fax: 989/777-1583
Grand Rapids600 44th Street S.W.Grand Rapids, MI
49548616/538-2400
Fax: 616/538-0449
Northeast Detroit65809 Gratiot AveLenox, MI 48050
586/727-7502Fax: 586/727-7311
West Detroit56555 Pontiac Trail
New Hudson, MI 48165 248/437-8121
1-800/457-8121
Traverse City8300 M-72 EastWilliamsburg, MI
49690231/267-5060
Fax: 231/267-5257
Naperville, IL 60563630/355-7150
Fax: 630/355-7173
Rockdale, IL 60436815/730-9011
1-800/937-3355Fax: 815/730-9036
Rockford, IL 60012815/961-3160
Fax: 815/965-1810
South Holland, IL60473
708/331-6362Fax: 708/331-7334
Wauconda, IL 60084847/526-7700
Fax: 847/526-3565
Bloomington, IN 47403812/333-9677
Fax: 812/333-9731
Fort Wayne, IN 46825260/482-8576
Fax: 260/483-4057
Indianapolis, IN 46219317/544-3411
Fax: 317/544-3420
Lafayette, IN 47905765/447-6933
Fax: 765/448-9038
South Bend, IN 46619574/232-1461
Fax: 574/233-3324
Des Moines, IA800/822-2212
Fort Dodge, IA800/362-2487
Sioux City, IA800/352-4693
Waterloo, IA800/772-2019
Dodge City, KS800/794-0172
Great Bend, KS800/264-4056
Park City, KS800/262-0139
Topeka, KS800/279-6087
Ulysses, KS800/472-9238
Kansas City, MO888/306-3434
Springfield, MO888/306-2656
Gering, NE800/205-6784
Grand Island, NE800/868-4017
Lincoln, NE800/416-5518
North Platte, NE800/894-7060
Omaha, NE800/416-5095
Brunswick, OH800/716-9796
Cambridge, OH 740/439-2747
Canton, OH866/235-0438
Chillicothe, OH 740/663-5300
Cincinnati, OH800/844-3734
Columbus, OH800/222-2010
Lima, OH800/423-7445
Painesville, OH866/800-1398
Poland(Youngstown), OH
866/503-7259
Vandalia (Dayton),OH
800/233-4228
Cranberry Twp, PA724/776-3636
Delmont, PA724/837-4500
Ashland, WI715/682-5522
Chippewa Falls, WI715/834-2924
Monico, WI715/487-5583
Mosinee, WI715/693-3820
Duluth, MN218/722-7456
Bemidji, MN218/759-1996
Grand Rapids, MN218/326-9427
Escanaba, MI906/789-9054
Louisville, KY502/253-3721
Richmond, KY859/623-2030
Bowling Green, KY270/842-3400
London, KY606/862-8447
www.westsidetractorsales.com www.murphytractor.com
ting equipmenenhen rWttachment with the aequipmen
Nobody digs deeper or tr
o go than Nore ter place, thertting equipmenle ano tackou need tts yttachmenoducou pro keep yder ties harNobody digs deeper or tr
e modelte lave haWax. tro go than Noreprax rtrour Norall y. Cy joble an
, o�tablee and prtivoduc y daerve
w hour , loe model. yodae ttivtaesenepr
yy da .
WI , shlandA 715.682.5522
WI , allsa FhippewC 715.834.2924
WI , oMonic 715.487.5583
715.682.5522
715.834.2924
715.487.5583
, WIMosinee
uluth, MN D
emidji, MN B
, WI 715.693.3820
uluth, MN 218.722.7456
emidji, MN 218.759.1996
, MN apidsand RrG 218.326.9427
anaba, MI Esc 906.789.9054
Y , KouisvilleL 502.253.3721
218.326.9427
906.789.9054
502.253.3721
ichmondR
wling GoB
ondon, KL
Y, Kichmond 859.623.2030
Yeen, Krwling G 270.842.3400
Yondon, K 606.862.8447
www.nortrax.com www.brookstractor.comSun Prairie
1900 W. Main St.P.O. Box 9
Sun Prairie, WI 53590608-837-5141
Milwaukee12101 W. Silver Spring Dr.
Milwaukee, WI 53225414-462-9790
De Pere1031 Lawrence Dr.De Pere, WI 54115
920-336-5711
West Salem451 W. Avenue N.
West Salem, WI 54669608-786-2644
Plover5429 Prairie Dr.Plover, WI 54467
715-254-2777
Page 48 • May 24, 2014 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
Authorized Doosan Dealers
ILLINOISLuby Equipment
Quincy217-222-5454
www.lubyequipment.com
INDIANARonson Equipment Co. LLC
Lowell219-696-5680 • 866-350-5538
www.ronsonequipment.com
IOWABrown’s Heavy Equipment, Inc.
Ames515-232-8456 • 800-723-5460
www.brownsheavyequipment.com
RTL Equipment Inc.Grimes
515-986-0262
Swisher319-857-4045
www.rtlequipment.com
MICHIGANCarleton Equipment Co., Inc.
Byron Center616-877-3388
Chesterfield586-463-3333
Kalamazoo269-343-2943 • 888-380-6420
Livonia734-421-9999
Saginaw989-777-6666
www.carletonequipment.com
MINNESOTALano Equipment Inc.
Shakopee952-445-6310 • 877-753-6100
www.lanoequip.com
MISSOURIBobcat of St. Louis
Columbia573-886-9435
Valley Park636-225-2900 • 800-782-0854
www.bobcatofstl.com
Luby EquipmentCape Girardeau
573-334-9937www.lubyequipment.com
NEBRASKABobcat of Omaha
Omaha402-895-6660
www.bobcat-omaha.com
NORTH DAKOTAIronhide Equipment
dba Bobcat of Devils LakeDevils Lake701-662-5331
dba Bobcat of Grand ForksGrand Forks701-772-5006
dba Bobcat of WillistonWilliston
701-572-5050www.goironhide.com
OHIOBobcat Enterprises, Inc.
Cincinatti513-874-8945 • 800-589-2281
Hilliard614-876-1116
www.bobcat-ent.com
Gibson Machinery LLCCleveland
440-439-4000www.gibsonmachinery.com
SOUTH DAKOTADiesel Machinery, Inc.
Aberdeen605-725-4364 • 888-762-6312
Rapid City605-348-7438 • 800-658-3047
Sioux Falls605-336-0411 • 800-456-4005
www.dieselmachinery.com
WISCONSINSwiderski Equipment, Inc.
Antigo715-623-4668
Mosinee715-693-3015
Thorp715-669-5255
Waupaca715-258-3266
Wausau715-675-2391
www.swiderskiequipment.com
.ctnempiuqeylub.www4545-222-712
ycnuiQnpmeiu Eqyy EqbuL
OISINLIL
sreal Deanoso DdzeirohtAu
b.www402
cabBoEBRN
mo.c
tn
omc.ahaom-tacobb0666-958-402
ahOmahaam Off O ott oca
AKSAEBR
Intnpmeiu EqLTRmpuiqyevaehsnwobr.www3270-0 8 •6458-232-515
smeApmeiu Eqyy Eqvea Hs’nwoBr
WAOItnmepiuqennsoor.www
503-66 8 •086-5696-912llewoL
Ctt Co.npmeiu EqnosnoRANADIIN
07
oa Bbd
07Gboa Bbd
07Deboa BbdhnoIrRON
c. Inmoc.tnem
6045-3
c. In,tnpme
moc.t835-550
CL L Co.
50-5027-510notsilliW
notsillif Wt oacbo
60-50277-10skrod FnarG
skrod Fnarf Gt oac
1335-2661-0kea LslivDe
ekas Llivef Dt oactnpmeiu Eqedi
TAOKA DHTR
3333364865dlefiretsehC
88337-78-616retne CnyroB Ctt Co.npmeiu EqnotelrCa
NAIGHMICc.tneipmuqeltr.www
54047-58-913rehsiwS
2620-689-515semirG
Intnpmeiu EqLTR
44
nosGibwww6
4-87-8315
ttcabBo
www
c. In, Co.
mo
c. In
0004-943-04danlevleC
CL Lyreinhca Mnmo.ctne-tacbo.bw
6111-678-41drailliH
1822-985-0 80 •5494-8ittaincinC
c. In,seisrpret EnIOHO
moc.edihnoiro.gw
eeopkSha Intnpmeiu EqonaLATTAOSNNEIMnempiuqetonelarc.www
6666-777-989nawigaS
9999-124-437ainvoLi
83 888- •3492-343-962oozmaalaK
3333-364-865
Wid.www0-633-560S
7-8435-06R
4-527-506
leseiDOUS
bsoig.www
c. InA
moc.tn
0246-0
NSINCOSImo.cyrenihcalmese
5004-6450-0 8 •1140sllax FuoiS
7403-586-00 8 •3847yti CidapR
2136-267 888- •4634deenrebA
c. In,yrenicha MATTAOKAH DTOU
moc.yreniachmnbso
uaedrari GeapCnpmeiu Eqyy EqbuL
co.tlsfotabcob.www287-00 8 •0092-5226-36
kray PellaV
5349-68-8375aibolumC
uo. Ltf St oacboBIROUSSIM
moc.ipuqeona.lwww357-77 8 •013-6544-259
op
7
17
7
17
ksrediwSW
utnmco
4580-2
siu
m001-63
ausauW
6623-5825-1acapauW
5525-9665-1prhoT
1503-396-15eensioM
8664-623-51oigtnA
c. In,tnpmeiu EqikNSINCOSI
.ctnempiuqeylub.www7399-43-3735
uaedrari GeapC
diws.www7
mo.c
u
moc.tenmpiuqeiskred1 932-756-51
ausauW
Completed I-55’s SmoothnessFalls Within DOT’s Initiative
pleased with the finished smoothness ofthe road and the fact that the work was com-pleted ahead of schedule. The smoothness ofthe completed I-55 section falls withinMoDOT’s initiative to “smooth out much ofthe state’s pavement,” which is projected toimprove annual fuel economy in the state by
2.4 percent.As Dowell succinctly summarized: “We
made the road really smooth; got it donereally fast; and made my company somemoney… couldn’t ask for more.”
(This story also can be found on
Construction Equipment Guide’s Web site at
www.constructionequipmentguide.com.) CEG
The Stone Mastic Asphalt is stickier, which is designed to adhere better to the baselayer. A total of 120,000 tons (108,862 t) of asphalt was used on this project —50,000 tons (45,359 t) for the finish lift, 70,000 tons (63,502 t) for the base.
ROADTEC from page 28
Efficiency Production Inc.Names NMC as New DealerEfficiency Production Inc., an American
manufacturer of trench shielding and shoringsafety equipment, recently announced theaddition of NMC — The Cat Rental Store toEfficiency’s dealer network. “We are very excited to be entering into a
new venture with two very strong equipmentrental companies who really understand thedynamics of the underground utility industryin the Midwest,” says Gary Bushong,Efficiency’s vicepresident of sales.Headquartered in
Omaha, Neb., NMCnow provides trenchsafety equipmentrental and services forall contractors andmunicipalities in eastern Iowa and Nebraska. “NMC is pleased to be working with
Efficiency on our new UndergroundEquipment Rental division,” said GregHope, manager of NMC’s UndergroundEquipment Rentals. “This expansion sup-ports our commitment to our customers as atotal equipment solutions provider andextends our offerings with quality products,”
Hope said.Incorporated in 1971, EPI was the first
shoring manufacturer to commercially man-ufacture and distribute trench shields in theUnited States and Canada. Since then,Efficiency has grown to be a leading manu-facturer of trench shielding and shoringequipment. With a staff of professional engi-neers, product specialists, and a state-of-the-art manufacturing facility, Efficiency pro-
vides products throughout the United States,Canada, South America and many otherparts of the world.For more information, visit
www.nmc.corp.com or www.efficiencypro-duction.com.
(This story also can be found on
Construction Equipment Guide’s Web site at
www.constructionequipmentguide.com.)
CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • May 24, 2014 • Page 49
7.5 CUBIC YARDS…AND A CLOUD OF DUST.Engineered for speed, easy control and fuel e�ciency, Doosan wheel loaders deliver class-leading li� capacities and fast cycle times, no matter which model you own. Load-sensing, closed center hydraulics and variable displacement piston pumps e�ciently power your ability to do more in a day, leaving a mountain of work in your dust.
DoosanEquipment.com/CloudDust11Doosan and the Doosan logo are registered trademarks of Doosan Corp. in the United States and various other countries around the world. ©2014 Doosan Infracore Construction Equipment America. All rights reserved. | 0514105
Doosan Delivers
Page 50 • May 24, 2014 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • May 24, 2014 • Page 51
Page 52 • May 24, 2014 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
FABCO Expands Into 52,000 Sq. Ft. State-of-the-Art Facility
Representing Miron Construction Co., the general contractorof the new facility, are Rick Seeley (L) and Andre Lorenzen.
Mike Bauer (L) and BruceJohnson (R), both of FABCOEquipment, welcome DonAustin of Kraemer Co. to thenew facility.
Chris Blunt (L), IndianheadExcavating, and Bill Lyberg of BillLyberg Construction tour the new52,000 sq. ft. facility.
(L-R): Taking a look at this Cat242D skid steer are JustinDeiss, River States Truck &Trailer; Steven Thompson,CVTC; and Ryan Ehlers, K&SCarriers.
Mike Loken (L), FABCO Equipment retiree,catches up with FABCO Equipment’s TomScalzo.
(L-R): Aaron Graveen, FABCO Rents; AaronSimmons, FABCO Equipment; and Dennis Ruid,president of Dennis Ruid Excavating.
FABCO Equipment Sales Representative John Erjavec(C) speaks with customers at the grand opening.
Representatives of Miron Construction Co. Inc. and FABCO EquipmentPresident and CEO, Jere Fabick, with the granite rendering of the newbuilding.
FABCO from page 8
NPK Debuts Four New PH-Series Hydraulic HammersNPK Construction Equipment Inc. now
has four new PH Series hydraulic hammermodels that will replace its GH-1 throughGH-4 model hammers. These new one piece body hammers are
equipped with an anti-blank firing featureproviding longer component life. In addi-tion, NPK’s PH Series is available with anoptional fully enclosed “Enviro-Bracket,”providing reduced noise levels. Other fea-tures include a field replaceable tool bush-ing and a larger diameter retaining pin forease of maintenance and longer servicelife. With more than 45 percent fewer total
parts than previous models the PH Seriesstill incorporates the popular nitrogen gaspowered piston for the hardest hitting ham-mers in their class, according to the manu-facturer. The PH-1 comes in with 350 ft. lbs.
impact energy, weighs 423 lbs. (192 kg)
and will fit a 2 to 3.5 ton (1.8 to 3 t) carri-er. The PH-2 produces 500 ft. lbs., weighs487 lbs. (221 kg) and fits a carrier in the 3to 5.5 ton (2.7 to 5 t) class. The PH-3 willoutput 750 ft. lbs., weighs 825 lbs. (374kg), and fits a 4 to 8 ton (3.6 to 7.2 t) carri-er while the PH-4 is in the 1,300 ft. lb.impact energy class, weighs 1,064 lbs.(482 kg) and is best matched to a carrier inthe 6 to 9 ton (5.4 to 8 t) weight class.NPK maintains an extensive network of
nearly 300 distributor outlets and an exten-sive parts distribution network to assuremore equipment uptime with NPK ham-mers as well as compactors/drivers, crush-ers, material processors and pedestal boomsystems. For more information, call 800/225-
4379 or visit www.npkce.com.(This story also can be found on
Construction Equipment Guide’s Web site at
www.constructionequipmentguide.com.)
Bradco Tree, Shrub Grapple Makes Hard Digging EasierThe Bradco tree and shrub grapple by Paladin
Attachments, the newest addition to Paladin’sextensive grapple selection, is designed to makesome of the hardest tasks in landscaping quick-er, cleaner and safer. Mounted on highly versa-tile compact tool carriers, the tree and shrubgrapple can easily remove small trees, shrubs,ornamentals and small stumps — even in tightspaces. A hydraulically-powered alternative toshovels, axes, chains, or stump grinders, the treeand shrub grapple attachment reduces job timeby effectively removing the whole plant, includ-ing the stump, tap and secondary root system, inone simple step. In addition to being easy to use,the tree and shrub grapple keeps clean up to aminimum by leaving dirt, gravel, mulch, etc. inplace with minimal disruption to the removalsite, which can often be cleaned up with just abroom.Paladin recently put the tree and shrub grap-
ple to the test on a residential condominiumproject. In just three hours the contractor wasable to cleanly remove more than 50 small treesand shrubs with no damage to the surrounding
vegetation, residential structures, irrigation sys-tems or decorative garden materials. A job thatwould typically have required a two-man crewseveral days to complete with conventionaltools was easily condensed into a few hoursallowing the contractor to quickly finish thisproject and move on to the next. The tree and shrub grapple is constructed of
half-in. (1.3 cm) AR 400 and AR 235 high-strength steel for maximum durability for yearsto come. The grapple attachment weighs 185lbs. (84 kg) with a maximum working pressure(PSI) of 3,000 lbs. to tackle the toughest appli-cations. There are many other uses for the versatile
tree and shrub grapple attachment, includingbreaking up and removing asphalt drivewaysand removing small stumps and other appro-priately sized materials. For more information, call 800/456-7100 or
visit www.paladinattachments.com.(This story also can be found on Construction
Equipment Guide’s Web site at www.construc-
tionequipmentguide.com.)
Pages 53-57For more information about these attachments and more, visit our Attachments Section on our Web site at www.constructionequipmentguide.com
SECT IONAttachments
A hydraulically-powered alternative to shovels, axes, chains, or stumpgrinders, the tree and shrub grapple attachment reduces job time by effec-tively removing the whole plant, including the stump, tap and secondary rootsystem, in one simple step.
NPK now has four newPH Series hydraulic
hammer models that willreplace its GH-1 through
GH-4 model hammers.
Page 54 • May 24, 2014 • www.constructionequipmentguide.com • Attachments & Parts Section • Construction Equipment Guide
Cat Performance Series Buckets Perform OptimallyCat performance series buckets
represent a loading system that bal-ances the shape of the bucket withthe wheel loader’s linkage design,operating weight and lift/tilt capa-bilities. The net result is optimummachine performance in produc-tion-oriented applications, whethertruck loading, stockpiling, or load-and-carry, according to the manu-facturer.
Performance series buckets,which incorporate a more-efficientdesign than that of conventionalbuckets, are available in a numberof styles and application-specificconfigurations that ensure highproduction and long-term durabili-ty in even the most severe applica-tions.
Performance series buckets,compared with conventional buck-ets, have a number of design ele-ments that account for theirenhanced loading characteristics:
• wider throat opening (morespace between the cutting edge andthe spill guard)
• longer floor (more surface forentering material before encoun-tering the radius at the back of thebucket)
• curved side bars (adding sur-face area to the side of the bucketto contain more material)
• modified strike plane (a geo-metric aspect of the bucket in itscarry position that improves loadretention)
• increased bucket rack-back(further increases material reten-tion)
• redesigned spill guard (increas-es capacity; protects linkage com-ponents, hydraulic cylinders, andsensors; enhances sight lines to theloading area)
The tangible results of thesedesign elements include: easier,faster loading — even by less-experienced operators; increasedfill factors (on the order of 10 per-cent greater than conventionalbuckets, resulting in fewer passesper truck and more truck loads perday); increased containment ofmaterial during transport; andenhanced sight lines to the pile andinto the bucket (allowing operatorsto easily determine when the buck-et is full, a feature that eliminatesthe time and fuel wasted inattempting to load an already-fullbucket).
In an evaluation using the Cat972H and 980H wheel loaders tocompare performance series buck-ets with conventional buckets, themachines, when equipped withperformance series buckets, aver-aged 5 to 7 percent better fuel effi-ciency, a 3- to 5-second reductionin per-cycle loading time, and a0.5- to 1.5-ton increase in per-passpayload, according to the manufac-turer.
BucketStyles/ConfigurationsThe performance series buckets
range includes a number of bucketstyles — for example, general-pur-pose, light-material, sand/gravel,and material-handling — as wellas a number of specific-applicationconfigurations, including rock,
heavy-duty rock and heavy-dutygranite.
General-Purpose: Among themost popular styles is the general-purpose, which provides overallperformance in stockpiling, mate-rial-handling, excavating andbank-loading applications. Thesebuckets are designed for standardbreakout forces and moderatelyabrasive conditions. The base edgeaccepts either a bolt-on cuttingedge or adapters that accommodateK-Series tips. Side wear plates areavailable.
Rock: Rock buckets aredesigned for use in moderatelyabrasive face-loading applications,such as limestone and unprocessedrock, as well as in truck- or hopper-loading operations with a widerange of quarry materials. A spe-cially contoured spill guard
enhances visibility to the bucketcorners and slots in the spill guardimprove visibility to the material.An optional wear kit includes floorliner, radius liner, upper/lowerouter side plates. A selection ofground-engaging systems is avail-able.
Heavy-duty rock: Heavy-dutyrock buckets are intended for usein extremely aggressive applica-tions, such as face-loading tightlycompacted pit materials, in whichmaterials are moderately abrasiveand high impact is frequentlyencountered. Protective featuresinclude those for rock buckets, butadd rock-deflecting wings, base-edge end protectors, half-arrowsegments between adapters, bot-tom skis, bottom and base-edgewear plates, and mechanicallyattached wear plates beneath the
boom-pin areas.Heavy-duty granite: This
bucket is used in extremely aggres-sive applications, such as faceloading granite, and is intended foruse in materials and applications inwhich high abrasion and highimpact is encountered. The bucketinterior is completely lined, shearblocks are installed to restrict side-bar-protector movement, a fullcomplement of bottom protectionis used, and base-edge protectionincludes top-mounted wear plates,half-arrow segments and adaptercovers.
For more information, visitwww.cat.com.
(This story also can be found on
Construction Equipment Guide’s
Web site at www.constructionequip-
mentguide.com.)
Cat performance series buckets have optimum machine performance in production-oriented applications, whether truck loading,stockpiling, or load-and-carry.
Construction Equipment Guide • Attachments & Parts Section • www.constructionequipmentguide.com • May 24, 2014 • Page 55
Page 56 • May 24, 2014 • www.constructionequipmentguide.com • Attachments & Parts Section • Construction Equipment Guide
PROVIDING SUPERIOR PRODUCTS & SUPPORT SINCE 1996
ASK ABOUT OUR BREAKER AUTOLUBE SYSTEMS!
JCB’s New Standard-DutyBrush Cutter for SSLs/CTLs
Available in standard and high-flow models, JCB’s new standard-duty brush cutteris one of more than 30 attachment families available for the company’s skid steerand compact track loaders. Designed to clear light to medium density brush andhardwoods up to 4 in. (10 cm) in diameter, the brush cutter is ideal for roadsidemaintenance, right of way clearing, site preparation and trail maintenance.
Dual pressure relief on the hydraulic motor protects against pressure spikesthat could potentially damage the drive system. A pressure gauge indicator comesstandard, helping operators prevent overheating. Bi-directional cutting bladesallow operators to cut in both directions and reduce maintenance costs.
For more information, visit www.jcbamericas.com.
Construction Equipment Guide • Attachments & Parts Section • www.constructionequipmentguide.com • May 24, 2014 • Page 57
®
visit: www.digrock.come-mail: sales@leattach.com
call to order:866-928-5800 or 508-829-4855
"Leader in Excavator Rock Ripping Attachments"eadingdge
ttachments,
Inc.
Multi-ply Your Money!®
with the excavator rock ripping
Multi-Ripper BucketMulti-Ripper BucketMulti-Ripper
TM
Maximize forceone tooth at a time,using our patented
"Shanks on an Arc"technology.
6 to 9 times the forceof a standard 5 tooth bucket
4 times faster than a hammer
As seen on
Discovery channel’s
#1 hit show
“Gold Rush”
Multi-RipperBucket
Hi-CapMulti-Ripper
Bucket
Whatever Your Application: RECYCLING • LOGGING • CONSTRUCTION • AQUATIC • WASTE HANDLING • DEMO • SCRAP • ROAD & BRIDGEWe Have Your Attachment: GRAPPLES • BUCKETS • CRUSHERS • SHEARS • FORKS • CUSTOM ENGINEERING
CLICK OR CALL TODAY! PEMBERTONATTACHMENTS.COM • 1-800-393-6688
No matter what your material, Pemberton has the bucket, grapple or forks to handle it and we can fit it to your specific wheelloader or excavator. We have the attachment you need for construction, demolition, logging and scrap material or waste handling.
Got MATERIALSto Move?
Contact Pemberton today to see how we can help you maximize your equipment and your manpower.
Page 58 • May 24, 2014 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
ILLINOISBIRKEY'S CONST. EQUIPMENT
construction.birkeys.comGalesburg
(309) 341-4360Bloomington
(309) 827-0520Mattoon
(217) 235-3158Urbana
(217) 337-1781
DIAMOND EQUIPMENTwww.diamondequipment.com
Mt. Vernon(618) 242-2273
WEST SIDE TRACTOR SALESwww.westsidetractorsales.com
Naperville(630) 355-7150
Rockdale(815) 730-9011
Rockford(815) 961-3160South Holland(708) 331-6362
Wauconda(847) 526-7700
INDIANADIAMOND EQUIPMENT
www.diamondequipment.comEvansville
(812) 425-4428
MACALLISTER MACHINERYSALES/RENTALS
www.macallister.comIndianapolis
(317) 545-2151Indianapolis
(317) 244-RENT (7368)Fort Wayne
(260) 483-6469 (heavy equip.)
(260) 969-3322 (rental store)Lafayette
(765) 449-8191 (heavy equipment)(765) 446-5600 (rental Store)Terre Haute
(812) 478-3155(heavy equipment)
(812) 231-6000 (rental store)South Bend
(574) 288-6622Washington
(812) 254-1712Bicknell
(812) 735-0286Bloomington
(812) 349-9220Fishers
(317) 598-9700Greensburg
(812) 663-5829Richmond
(765) 966-0626Yorktown
(765) 759-2CAT (2228)
IOWAZIEGLER CAT
Altoona800-342-7002
Atlantic877-547-3819
Sioux City712-252-4401Fort Dodge
800-342-1848Mason City
800-342-1849Postville
800-526-0889
KENTUCKYDIAMOND EQUIPMENT
www.diamondequipment.comBowling Green(270) 781-1061
OHIO CATwww.OhioCAT.com
Richwood(888) 446-4658
WILSON EQUIPMENT CO.www.wilsonequipment.com
Corbin(606) 528-0700
Lexington(859) 254-6443Prestonsburg
(606) 874-8036
Bobcat Releases M-Series Excavators Bobcat Company has released four new Tier IV excava-
tors — the E42, E45, E50 and E55 — which include a non-DPF (diesel particulate filter) engine solution. These fourmedium-sized M-Series machines provide operators with allof the same performance benefits of the previous interim TierIV models. The machines also feature a new forward-mountinstrumentation system.
The Tier IV Bobcat non-DPF solution was achieved bydesigning an ultra-low particulate combustion (ULPC)engine. The ULPC is accomplished through a speciallydesigned engine combustion chamber that significantlyreduces the amounts of particulate matter created duringcombustion. Therefore, Tier IV emissions compliance can beachieved without using a DPF.
In addition to eliminating the need for a DPF, the newengines used in E50 and E55 excavators will have a 12 per-cent increase in torque. This increase in torque is producedover a wide range of engine rpm, allowing operators of allskill levels to better utilize the machines’ maximum per-formance.
The new Tier IV excavators feature a machine protectionsystem that monitors, manages and shuts down the engine ifneeded. This system monitors engine coolant and oil tem-peratures and will manage engine systems to reduce the pos-sibility of these fluids reaching a point where the machinehas to be shut down. This minimizes potential damage to theengine, stops unnecessary engine wear and keeps operatorsworking.
Another new feature of the M-Series Tier IV excavators iscold weather protection. Anytime the engine temperature istoo low, the loader will temporarily limit the maximumengine speed (rpm) to prevent premature component wear orfailure. Engine idle speed also is raised slightly to help theengine reach its operating temperature faster. As soon as theengine warms up to a predetermined temperature, the pro-tection mechanism will deactivate.
M-Series MachinesThe conventional tail swing E42 minimizes ground dis-
turbance and excels at bulk excavation tasks, while the zerotail swing E45 can excavate close to surrounding objectswith unobstructed rotation and good all-around visibility.The E50 is a minimal tail swing excavator with a compactframe for projects in tight areas without sacrificing diggingor attachment performance. Class-leading lift capacity andslew torque performance top the capabilities on the conven-tional tail swing E55, according to the manufacturer.
Three of the Tier IV excavators — the E42, E45 and E55— offer a clamp-ready extendable-arm configuration thatprovides additional length when fully extended, giving oper-ators ultimate reach without having to upsize the machine.
Like all M-Series excavators, these new Tier IV models allfeature an independent boom swing for offset operation aswell as auto-shift travel, which boosts the machine’s produc-tivity by shifting the machine out of high range and backautomatically. An auto-idle feature, which can be enabled atthe operator’s discretion, automatically causes the engine toreturn to idle if the excavator’s functions are not used for fourseconds, saving fuel and reducing sound levels.
A total of 13 Bobcat attachments that can help these fourversatile machines do more than dig. They include augers,breakers, plate compactors, grading buckets, trenchers andrippers to name a few. The X-Change attachment mountingsystem, available on some models, increases productivity byquickly changing between attachments. Another option is the
Hydraulic X-Change system, which uses hydraulic pins thatretract and extend with the push of a button to change attach-ments, and it maintains optimal “pin-on” bucket geometry toensure arm and bucket forces are not compromised.
Forward-Mount InstrumentationImprovements
A new forward-mount instrumentation system designedfor enhanced functionality and improved ergonomics isbeing introduced with the E42, E45, E50, and E55. This cabredesign presents operators of Bobcat excavators with manyof the functions, aesthetics and visibility they’ve come toenjoy with Bobcat loaders. The new excavator instrumenta-tion technologies also can help owners and fleet managersbetter understand and evaluate their performance and costs,as well as assist them with identifying opportunities toimprove machine and operator efficiencies and protect theirinvestments.
The new deluxe instrumentation panel and control switch-es have been designed to be more ergonomic for the opera-tor. The previous instrumentation panel required the operatorto turn to the side to engage the panel’s input switches; thenew panel presents these buttons in front of the operator,where they are easier to identify and reach. From the opera-tor’s viewpoint, the location of the panel also aligns with theexisting cab components and work group structures to main-tain visibility to the attachment.
The M-Series excavator’s optional deluxe instrumentationpanel features multi-lingual functionality, similar to otherBobcat products. It also offers multiple capabilities fromanalyzing user statistics, to integrated attachment controls,vitals and diagnostics. The new instrumentation systemincludes the functionality to capture individual fuel usageand real-time fuel consumption, as well as idle-time data.
Among the many improvements offered with the newinstrumentation panel, it provides for an enhanced version ofthe popular keyless start option, which can increase securityfor equipment assets.
For more information, visit www.bobcat.com.(This story also can be found on Construction Equipment
Guide’s Web site at www.constructionequipmentguide.com.)
The Tier IV Bobcat non-DPF solution was achieved bydesigning an ultra-low particulate combustion (ULPC)engine. The ULPC is accomplished through a speciallydesigned engine combustion chamber that significant-ly reduces the amounts of particulate matter createdduring combustion.
CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • May 24, 2014 • Page 59
Built from a lineage of market leaders for over 60+ years
Which compact grader has a 60+ year USA Heritage?
MICHIGANMILLER-BRADFORD
& RISBERG, INC.www.miller-bradford.com
Negaunee800-562-9770
MINNESOTAZIEGLER CAT
www.ZieglerCAT.comMinneapolis
(800) 352-2812Brainerd
(877) 829-9850Buhl
(800) 446-9795Columbus
(866) 982-5656Crookston
(800) 422-5782Duluth
(800) 421-3831
ZIEGLER CATFergus Falls
(800) 346-7649Jackson
(866) 847-6401Marshall
(800) 325-4929North Mankato(877) 845-3938
Rochester(800) 247-1068
Shakopee(800) 352-2812
St. Cloud(800) 522-9469
OHIOOHIO CAT
www.OhioCAT.comBroadview Heights(800) 837-6200
Sharonville(888) 332-4658 (Sales & Service)
(888) RENT-441 (Rental)Columbus
(888) 441-4658 (Sales & Service)(888) RENT-441 (Rental)
Perrysburg(888) 339-4658 (Sales & Service)
(888) RENT-441 (Rental)
OHIO CATTroy
(888) 330-4658Youngstown
(800) 837-6203Cadiz
(800) 837-6204Canton
(800) 837-6207Zanesville
(800) 837-6205N. Canton
(888) 736-8443Oakwood Village(800) 633-1020
WISCONSINMILLER-BRADFORD
& RISBERG INC.www.miller-bradford.com
Sussex800-242-3115
Madison800-585-7219Eau Claire
800-585-7232DePere
800-638-7448Abbotsford
888-886-4410
Page 60 • May 24, 2014 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
WHATEVER YOUR APPLICATION, THERE’S A PERFECT TEREX CRANE.With over 100 years of experience and a commitment to speed, Terex Cranes focuses on getting the job done, aiming at maximum uptime and a high return on investment. Because your results are what really matters.
THERE’S A PERFECT TEREX CRANE.
Contact our distributors and find out how we can help to improve your bottom line.
Authorized Terex Cranes Distributors
All rights reserved. Terex is a registered trademark of Terex Corporation in the United States of America and many other Countries.
For Your Local Terex Dealer, Please Contact: Terex USA, LLC106 12th St. SE
Waverly, IA 50677 USAPhone: (319) 352-3920Fax: (319) 352-9395
email: info.cranes@terex.comweb: www.terex.com/cranes
RTL Equipment Inc.(RT-T-HC/CC-AT)
www.rtlequipment.com3000 SE Gateway Drive
Grimes, IA 50111515-986-0262
Fax: 515-986-0267
2601 120th St. NWSwisher, IA 52338
319-857-4045Fax: 928-441-1269
Custom Truck & Equipment(RT-T-HC/CC-AT-BT)7701 Highway 24
Kansas City, MO 64125800-861-1065
www.cte-equipment.com
All Erection & Crane Rental Corp.
(RT-T-HC/CC-AT-BT-Towers)4700 Acorn Dr.
Independence, OH 44131800-232-4100
Fax: 216-642-7633www.allcrane.com
BRANCH LOCATIONSAll Crane Rental of PA, LLC
Pennsylvania412-382-4200
All Crane & Equipment Rental Corp.West Virginia
304-766-0300
Dawes Rigging & Crane Rental, Inc.Wisconsin
414-453-5335
Jeffers Crane Service, Inc.Michigan
419-693-0421
CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • May 24, 2014 • Page 61
Howell Tractor480 Blaine StreetGary, IN 46406800/852-8816
Fax: 219/977-4220
Illinois Truck & Equipmentwww.iltruck.com320 Briscoe DriveMorris, IL 60450
815/941-1900Fax: 815/941-1486
Mid CountryMachinery
3478 5th Ave South (Bus. Hwy 20)
Fort Dodge, IA 50501800/206-5936
4734 Sergeant Rd. (Hwy 63)
Waterloo, IA 50701319/234-8710
106 8th StreetSergeant Bluff, IA 51054
712/943-4470
Custom Truck & Equipment
www.customtruckandequipment.com7701 E. 24 Highway
Kansas City, MO 64125800/861-1065816/241-4888
Fax: 816/241-8826
2121 Stephens BlvdJoplin, MO 64804
417/659-8969Fax: 417/659-8871
Kelbe BrothersEquipment Co., Inc.
www.kelbebros.com12770 W. Silver Spring Drive
Butler, WI 53007262/373-2151
Fax: 262/373-2102
4621 Dutch Mill RdMadison, WI 53716
608/221-8300Fax: 608/221-0610
3101 French Rd.De Pere, WI 54115
920/343-6496Fax: 262-781-9671
Grand EquipmentCompany
www.grandequipment.com3310 Hudson Trail Dr.Hudsonville, MI 49429
616/896-7700Fax: 616/896-6700
ConstructionMachinery Company
www.cmcky.com2911 S. English Station Rd.
Louisville, KY 40299502/267-4020866/901-2262
Fax: 502/261-9251
2235 Ragu DriveOwensboro, KY 42303
270/683-2000877/683-2262
Fax: 270/683-3727
267 W. Jay Louden Rd.Carrollton, KY 41008
502/732-4661Fax: 502/732-8355
Page 62 • May 24, 2014 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
BRANDEIS MACHINERY & SUPPLY COMPANYwww.brandeismachinery.com1801 Watterson Tr.Louisville, KY 40299502/491-4000502/499-3195 Fax Evansville, IN812/425-4491812/425-1171 Fax Corbin, KY606/528-3700606/528-9014 Fax Lexington, KY859/259-3456859/254-0783 Fax Stanville, KY606/478-9201606/478-9208 Fax Paducah, KY270/444-8390270/575-4907 Fax Indianapolis, IN317/872-8410317/872-8417 Fax Ft.Wayne, IN260/489-4551260/489-1620 Fax
CONTINENTAL EQUIPMENT CORP.A division of AISwww.ceceq.com3600 N. Grand River Ave.Lansing, MI 48906517/321-8000Fax: 517/321-4191
ROAD BUILDERSMACHINERY & SUPPLY CO., INC.1001 S. 7th St. TrafficwayKansas City, KS 66105913/371-3822913/371-3870 FaxOmaha, NE402/331-9200Lincoln, NE402/325-0447Grand Island, NE308/384-2620
ROAD MACHINERY & SUPPLIES CO.www.rmsequipment.com5633 W Hwy 13Savage MN 55378952/895-9595800/888-9515Duluth, MN 218/727-8671800/888-9535Virginia MN218/741-9011800/752-4304Des Moines IA218/741-9011800/555-1445Sioux City IA712/252-0538800/633-9104Cedar Rapids IA319/363-9655800/616-6615Milan, IL309/787-1742800/633-9114
Nortrax Makes Organizational Changes Nortrax announced the following
functional and regional organizationalchanges. Michael Rugeroni has beenappointed to vice president of sales andmarketing and Chris Holmes has beenappointed vice president of productsupport. Tom Bauers has beenappointed vice president, southeastregion and Scott McGuigan has beenappointed vice president of the midsouth region.President and CEO Tim J. Murphy
said, “These changes reflect our con-tinuing efforts to extract operationalefficiencies from our business. Theyclearly place a focus on the importanceof execution at the store level as wecontinue to reduce our overhead costswhile increasing our responsiveness toour customers.” Rugeroni is now responsible for the
sales and marketing business segmentsfor the company operations in Canadaand the United States. He previouslyserved as the vice president of sales andmarketing of Nortrax’s Canadian oper-ations. “Mike’s 25 plus years in the con-
struction equipment industry with posi-tions of increasing responsibility inoperations and sales make him unique-ly qualified for this new assignment,”said Murphy. “His energy, enthusiasmand business acumen is highly respect-ed by his teammates, will serve ourcustomers and our employees extreme-ly well.”Holmes is now responsible for the
parts and service segments for theentire company, including the JohnDeere WorkSight technology segmentof product support. Previously heserved as vice president of business
development. “Chris has accumulated almost 29
years of experience with John Deereand John Deere dealers,” said Murphy.“His career started with John Deereworking in product support, sales andmarketing and dealer distributionstrategies. Since joining the retail sideof the business, his role in dealer oper-ations, supplier consolidation anddevelopment, as well as strategic cus-tomer support have provided him abroad prospective of our business. Hisability to connect with branch teamsand drive operational improvementswhile improving the customer experi-ences is a talent we are extremely for-tunate to have.”Bauers has been assigned leadership
responsibility of the Nortrax Floridaoperations, with stores in Lutz,Sarasota, Riverview, Miami, WestPalm Beach, Orlando, Fort Myers and
Pompano Beach. He previously hadresponsibility for the company’s rentaland used equipment operations. He hasnearly 20 years of construction equip-ment experience, all within the state ofFlorida. “I like the fact that Tom was a former
hockey player, as he has the skill to gointo the corner and bring out the puck,”said Murphy. “That grittiness, com-bined with Tom’s commitment toexcellence, highly engaged leadershipstyle and his professionalism make himwell qualified for this new assignment.”McGuigan joins Nortrax. In his new
role heading up the mid south regionwith operations in Louisville,Richmond, London and BowlingGreen, Ky., as well as operations inKnoxville, Chattanooga, Kingsport andNashville, Tenn. Scott previouslyserved as NPK’s southeast region man-ager and was responsible for the busi-ness relationship between NPK andNortrax operations in the mid south andsoutheast Regions. He has more than20 years of experience in the construc-tion equipment industry. “We are fortunate to have Scott join
our team,” said Murphy. “We built agreat relationship with him when herepresented NPK, who continues to beone of our most important allied sup-pliers. His willingness to engage,inspire and succeed is key to ourgrowth initiatives in Kentucky andTennessee.”For more information, visit
www.nortrax.com. (This story also can be found on
Construction Equipment Guide’s Web
site at www.constructionequipment-
guide.com.)
In his new role, Scott McGuigan willbe heading up the mid south regionwith operations in Louisville,Richmond, London and BowlingGreen, Ky., as well as operations inKnoxville, Chattanooga, Kingsportand Nashville, Tenn.
Michael Rugeroni is now responsi-ble for the sales and marketingbusiness segments for the companyoperations in Canada and theUnited States.
Tom Bauers has been assignedleadership responsibility of theNortrax Florida operations, withstores in Lutz, Sarasota, Riverview,Miami, West Palm Beach, Orlando,Fort Myers and Pompano Beach.
Chris Holmes is now responsiblefor the parts and service segmentsfor the entire company, includingthe John Deere WorkSight technolo-gy segment of product support.
CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • May 24, 2014 • Page 63
DOZERSFrom Komatsu – The Dozer Experts
ROLAND MACHINERY CO.www.rolandmachinery.com816 N. Dirksen Parkway,Springfield, IL 62702217/789-7711Bolingbrook, IL630/739-7474Carterville, IL618/985-3399Marengo, IL815/923-4966Portage, IN219/764-8080Escanaba, MI906/786-6920906/786-5813 Fax Bridgeton, MO314/291-1330Cape Girardeau, MO573/334-5252Columbia, MO573/814-0083Palmyra, MO573/769-2056DePere, WI920/532-0165920/532-0526 Fax DeForest, WI608/842-4151608/842-4193 Fax Eau Claire, WI715/874-5400715/874-5401 Fax Franksville WI 262/835-2710262/835-2844 Fax Schofield, WI715/355-9898715/241-0044 Fax
GENERAL EQUIPMENT & SUPPLIESwww.genequip.com4300 W Main AveFargo ND 58103800/437-2924701/364-2190 Fax 905 20th Avenue SEMinot ND 58072800/825-04792300 Vermont AvenueBismarck ND 58504800/279-4437
Page 64 • May 24, 2014 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
Improved Visibility Helps to Safely Handle Materials
height-adjustable cab with up to an18.4-ft. (5.6 m) maximum eye levelelevation. The ability to elevate the cab helps
operators to see better when loadingand unloading trailers and the process-ing equipment at the scrap yard,” saidYoung. Yount added, “For us, it’s also about
safety. The ability to improve visibilitythrough the elevated cab helps us tosafely handle the material.”While the material handlers have
helped AMM improve productivity,efficiency and safety, Yount still keepsa number of excavators at the yard. “I’m an equipment nut, and if I need
a piece of equipment, I want it nearby,”said Yount. “The excavators are rele-gated to doing the short-reach, tediousstuff. The real lifting and long reachwork is left to the Terex Fuchs materialhandlers.”
Problem SolvingThe efficiencies gained at the yard
gave Yount the confidence to takeadvantage of an opportunity to expandAMM’s commercial business. A manu-facturer of metal tubes had a need foran operation to process its out-of-specproduct. “It comes in all different sizes and
diameters, from 2- to 14-inch roundtubes to lengths reaching 42-feet,”explained Yount.Initially, AMM partnered with
another company to process the materi-al. However, its partner found cuttingthe tubes into the smaller sizes requiredby the steel mill to be easier said thandone. Many more truckloads of thismaterial came through the gates eachday than could be processed, so the out-of-spec tubes quickly stockpiled.
When it came time to review proce-dures, it was left up to AMM to go italone and find a more efficient way toprocess the scrap material. Yount cameup with a plan that involved a new typeof shear and another material handler. “I didn’t look for or try any other
type of loading equipment,” he said. “Itrust Roadbuilders and the Terex Fuchsmaterial handlers.”A new gravity-fed, 2,000-ton (1,814
t) guillotine shear was installed atAMM’s Fremont, Neb., facility specif-ically for processing the steel tubes.The company also purchased a thirdMHL350 D material handler, with itsprimary mission dedicated to process-ing the out-of-spec material. The ele-vated cab is of particular benefit for thisapplication, as the feed hopper of thegravity shear is higher than that of thehigh-wall trucks transporting the metaltubes.Up to five truckloads of the out-of-
spec material pass through AMM’sgates daily. The handler, with its four-tine grapple, immediately offloads thematerial, feeds the shear and loadstrucks with the processed material. “We had to go with the four-tine
grapple for this application,” explainedYount, “since it’s like grabbing a hand-ful of straws.”AMM’s solution is working well for
the unusual scrap material. Whereasthe other processor could not keep upwith the influx of material, AMM’soperators are able to efficiently keepup, due to the help of the MHL350 Dmaterial handler and gravity shear.“It’s an interesting circle,” said
Yount. “The material goes from themill to the tube manufacturer to makeits product. The out-of-spec materialcomes to us, and we process it and sendit back to the mill.”
The lessons learned in serving thecustomer for this once one-man opera-tion continues to be AMM’s guidingprinciples and has led the company ona path of significant growth. It also hasbeen a confidence-builder for Yount tocontinue to expand AMM’s services,like the new venture with the metaltube manufacturer.Because of the company’s growth
and the increase in scrap material vol-ume, the next logical step for AMMwas to install an automobile shredder,commissioned in the fourth quarter of2013. The material handler operatorsquickly learned that feeding the hungryshredder demands their constant atten-tion. “It requires one, sometimes two
Terex Fuchs material handlers workingtogether to stage and feed the mill,”said Conner Yount, yard operationsmanager of AMM. Kevin Yount added, “Conner has
mentioned that we need another mate-rial handler for the shredder.” With two guillotine shears, a bailer
and shredder to feed, operators find thatthere is never an “extra” Terex Fuchsmaterial handler available during highvolume periods, so the future additionof a fourth machine is a virtual certain-ty. “This time we may increase in size
to the MHL360 for the additionalreach,” said Kevin Yount. This model offers a 12.5 percent
longer reach of 59-ft. (18 m) than theMHL350 D material handler, whichwill be helpful in boosting loading effi-ciencies at the shredder, he said.
(This story also can be found on
Construction Equipment Guide’s Web
site at www.constructionequipment-
guide.com.)
TEREX from page 32
The MHL350 material handler offers a standard 52.5-ft. (16 m) reach, nearly double the reach of the excavatorspreviously used by All Metals Market.
The new MHL350s have rubber tire drive systems,which allow the handlers to quickly get around theyard, and they can pick a considerable amount ofweight.
Southeastern Equipment Company recentlyannounced that Justin Whiting has joined the compa-ny as sales representative at the Monroe, Ohio, loca-tion. Whiting is selling the full line of equipmentthroughout Hamilton, Highland, Greene, and Clinton
counties.“We’re glad to wel-
come Justin to our salesteam,” said CharliePatterson, president ofSoutheastern Equipment.“He brings a variety ofexperience to our group.We look forward to see-ing the contributionshe’ll be making.”For four years,
Whiting was an outsidesales representative with
a lumber business located in Ohio and Michigan. Mostrecently, he was the rental coordinator at a Caterpillardealership in Richmond, Ind.
(This story also can be found on ConstructionEquipment Guide’s Web site at www.constructionequip-
mentguide.com.)
Whiting JoinsSoutheastern
Justin Whiting
CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • May 24, 2014 • Page 65
Find Us on Follow Us on
Portable Power
800.633.5206 DoosanPortablePower.com © 2014 Doosan Infracore Portable Power
Whether you are looking for products with the latest technology or you want to have your old machine remanufactured, Doosan Portable Power can help you acheive success. Focused on customer satisfaction and product solutions, our dealer network is the largest nationwide network in the industry. Contact your local dealer today.
WE DO MORE THAN DESIGN EQUIPMENT.
WE POWER YOUR SUCCESS.
Aspen Equipment Co.
9150 Pillsbury Ave. SBloomington, MN 55420
(952) 888-2525
McAllisterEquipment Co.
150 E. North Ave.Villa Park, IL 60181
(630) 530-7600Alsip/Chicago, IL(708) 389-7700
E. Peoria, IL(309) 694-4455
Rockford, IL(815) 227-0555Springfield, IL
(217) 789-0351
RolandMachinery Co.
4670 Crossroads Industrial DriveBridgeton, MO
(314) 291-1330Cape Girardeau, MO
(573) 334-5252Columbia, MO
(573) 814-0083Palmyra, MO
(573) 769-2056Carterville, IL
(618) 985-3399DePere, WI
(920) 532-0165DeForest, WI
(608) 842-4151Eau Claire, WI
(715) 874-5400Franksville, WI
(262) 835-2710Schofield, WI
(715) 355-9898Escanaba, MI
(906) 786-6920
Central PowerSystems &Services
9200 Liberty DriveLiberty, MO 60468
(816) 781-8070Springfield, MO(417) 865-0505
Wichita, KS(316) 943-1231Great Bend, KS(620) 792-1361
Liberal, KS(620) 624-7274
Salina, KS(785) 825-8291
Colby, KS(785) 462-8211
Page 66 • May 24, 2014 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
Simplified profitability
Dynapac’s complete line of rollers and pavers combine years of experience with innovative thinking to make the job as fast, simple, and profitable as possible, from beginning to end.
F1000 series pavers: Cummins QSB 6.7 liter interim Tier 4 engineNorth American styling featuring the lowest deck height in the industry at 63 inches Easy to use control panel with one touch auto fill and cleaning modes
CA2500-CA4000 single-drum vibratory rollers:Static linear loads of 140-252 pliActive bouncing control Cummins or Deutz interim Tier 4 engine
CP224, CP224W and CP274 pneumatic tired rollers:Smooth start-stop system for directional changesWide-base tiresAir-on-the-run
Built for maximum performance, ease of maintenance and lower total cost of ownership, Dynapac’s rollers and pavers will provide you with more Uptime by Design.
www.dynapac.us
2300 Cassens DriveFenton, MO 63026
(636) 343-9970www.lubyequipment.com
Cape Girardeau(573) 334-9937
Springfield (217) 744-2233
Quincy (217) 222-5454
Caseyville(618) 397-9971
50 East Kingston Ave.Columbus, OH 43207
614-443-6541www.columbusequipment.com
Perrysburg(419) 872-7101
Cincinnati(513) 771-3922
Richfield(330) 659-6681
Cadiz(740) 942-8871
Dayton(937) 879-3154
Canton(330) 453-4521
Zanesville(740) 455-4036
Painesville(440) 352-0452
Piketon(740) 289-3757
7355 East 30th St.Indianapolis, IN 46219
(317) 544-3411Fax: (317) 544-3420www.westsidetractor
sales.com
Bloomington, IN(812) 333-9677
Fax: (812) 333-9731
Fort Wayne, IN(260) 482-8576
Fax: (260) 483-4057
LaFayette, IN(765) 447-6933
Fax: (765) 448-9038
South Bend, IN(574) 232-1461
Fax: (574) 233-3324
4301 North Cliff Ave.Sioux Falls, SD 57104
(888) 753-8907
3801 North Deadwood Ave.Rapid City, SD 57702
(800) 658-3047
39288 133rd St.Aberdeen, SD 57401(888) 484-6312
www.dieselmachinery.com
4100 Gardner Ave.Kansas City, MO 64120
(816) 241-9290(816) 241-1738www.vlpco.com
Joplin(800) 878-8223(417) 781-8222
Springfield(800) 955-2729(417) 887-2729
Wichita(800) 878-3346(316) 838-3346
Topeka(800) 878-4345(785) 267-4345
Garden City(800) 511-1435(620) 275-1996
CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • May 24, 2014 • Page 67
1401 2ND AVENUEDES MOINES, IA 50314
(515) 283-2215FAX: (515) 283-0295(800) 369-2215
2625 W. AIRLINE HWY.WATERLOO, IA 50703(319) 236-6830
FAX: (319) 236-6834(800) 791-9249
2950 6TH STREET SWCEDAR RAPIDS, IA 52404
(319) 365-5139FAX: (319) 365-6726(800) 728-5139
2100 E. LINCOLN WAYAMES, IA 50010(515) 233-9500
FAX: (515) 233-9505(866) 856-2312
TOP NOTCHEQUIPMENT, INC.5505 HIGHWAY 169 N.PLYMOUTH, MN 55442(888) 824-6559(763) 398-0079
FAX: (763) 551-7916WWW.TOPNOTCHEQUIPMENT.COM
STARE Q U I P M E N T
LT D .
WWW.STAREQUIP.COM
STAR EQUIPMENT LTD.
Page 68 • May 24, 2014 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
New Four-Lane Bridge Features Double-Steel Archeslane steel cantilever truss bride wasbuilt in 1938 and rehabilitated in1975. The old bridge had a suffi-ciency rating of 23.2 out of 100and so was considered structurallydeficient.The new bridge’s extra lanes
will make it possible to handle thelarger vehicles and the increase intraffic. Daily, about 8,000 vehiclescross the bridge.The new four-lane bridge
stretches nearly 2,500 ft. (762 m),featuring double-steel arches onthe main river span, and aestheticlighting. In early November 2013,upon completion of the bridge,lighting contractor Capital Electricpresented a 10 to 20 minute lightshow illuminating the new bridgefrom both sides. The lights hadbeen turned on in July but the viewof the lights had been obstructedon the north side by the formerbridge, which was demolished inOctober, according to informationfrom the Kansas Department ofTransportation. The new AmeliaEarhart Memorial Bridge wasopened in December.The bridge deck was removed
manually before three implosionstook place to remove the trusssteel by demolition contractorOmega DemolitionCorporation of Elgin, Ill., andtwo subcontractors, AdvancedExplosives Demolition Inc.,of Tensed, Idaho., andEngineered Explosive Serviceof Helotes, Texas.The bridge was 2,677 ft.
(816 m) long and the deck was23.9 ft. (7.3 m) wide.Demolition crews used linearshaped charges that actuallysever the steel rather thanblowing it apart, saidKimberly Qualls, spokesper-son of KDOT. Many smallcharges were placed at criticallocations on the structure. Once thebutton is pushed, all of the chargesdetonate at predetermined inter-vals. It took just seconds to demol-ish the structure. The blasémachine is operated from a com-mand post that is about 500 ft. (152m) from the bridge.After each blast, crews had 24
hours to remove debris from theMissouri River’s navigation chan-nel and an additional 24 hours toremove the remaining debris from
the rest of the river channel, Quallssaid. Debris was removed with acrane that was sitting on a barge inthe river channel.Getting its name from local avi-
ator Amelia Earhart whose home-town was Atchison, Kan., the newbridge was scheduled for comple-tion in the fall of 2011 but in latespring into August of 2010 andagain in 2011, flooding on theMissouri River created a hugemess causing gunk to becometrapped along the banks that crewshad to remove, Qualls said.
Construction also was prolongeddue to delays caused by issues withstructural steel fabrication and thecollapse of a coffer dam. Thedelays made it necessary torephrase portions of the project.While still in the design stage of
the new bridge, to determine if amid-river support column wasneeded, a Triple-Level O-cell testwas performed. “The test was donebecause of the unknowns in thesoil foundations near the castingyard on the Kansas side of the proj-ect due to all the debris known to
be placed in this area over the last100 years,” Qualls said.The purpose of the test was to
assess shear capacities of three dis-tinct underlying shale layers tofacilitate the design of the replace-ment bridge foundations. “Giventhe high anticipated capacity of the60-inch diameter, 160-foot deeptest pile and the need to fully mobi-lize all sections of the test pile, afirst-ever triple-level O-cell testconfiguration was selected,”Qualls said.Three levels of 4,000-ton (3,629
t) capacity O-cells were installedon a purpose-built carrying frame.The top and middle O-cells werepositioned at the boundarybetween the upper, middle andlower shales. The bottom O-cellwas positioned near the pile tip inorder to gain information about thebearing capacity of the lower shalelayer, Qualls added. In order tomatch the design assumptionregarding scour, the concrete wasonly poured up to the top of theshale, with a temporary casing
through the overburden used tokeep the shaft open until comple-tion of the test.The combined load reached dur-
ing four stages of testing rangedwas 17,800 tons (16,148 t), whichis the second highest pile test loadever achieved in North America,Qualls said. The maximum dis-placement of any of the four pilesections was .42 in. (1 cm).Demolition of buildings on the
Kansas banks also was necessarybefore construction began. Thebuildings were purchased anddemolished.In the meantime, construction
began on the Missouri side of theriver by Archer-WesternContractors LLC, of Chicago, asubsidiary of Walsh Construction.In January of 2012 crews began
installing large sections of the archspan section of the new bridge,after encountering a delay in deliv-ery of the structural steel compo-nents. The first arch rib portion was
Work began in July of 2008 on a new four-lane, tied-arch AmeliaEarhart Memorial Bridge over the Missouri River on US-59between Atchison, Kan., and Winthrop, Mo.
The bridge gets its name from local aviator Amelia Earhart whosehometown was Atchison, Kan.
see EARHART page 90
EARHART from page 1
Terex Environmental Equipment (TEE) has appointedConor Hegarty as international sales director, outside ofNorth America. He will have global responsibility for allsales and business development activity.Hegarty brings more than 10 years of equipment manu-
facturing experience to the company, joining TEE fromPowerscreen, another Terex Company. He has progressedthrough a number of roles increasing in responsibility for thePowerscreen product line. He started as a dealer manager in2003 before joining the sales team as a recycling specialist in2006. In 2007, Hegarty moved to the position of dealer man-ager of eastern Europe, Scandinavia and Russia. He wasthen promoted to position of regional sales manager of therest of world (ROW) in 2012. “Conor is a welcome addition to the TEE team. In his new
position he will focus on developing new ROW sales andservice and supporting existing distribution for TerexEnvironmental Equipment,” said Martin Dummigan, TEEglobal business line director. “His experience complementsthe strengths of the existing team and I am confident thatConor will work effectively within the organization to helpachieve the goals as we build momentum in 2014.”For more information, call 800/953-5532 or visit
www.terex.com/environmental-equipment.(This story also can be found on Construction Equipment
Guide’s Web site at www.constructionequipmentguide.com.)
TEE Names ConorHegarty as Its NewGlobal Sales Director
Lokotrack LT220D, the latest addi-tion to Metso’s mobile crushing andscreening equipment range, will revo-lutionize the way aggregate contractorsoperate around the world, according tothe manufacturer. Combining a cone crusher and a
screen into a single track-mountedplant, the Lokotrack LT220D reducesoperational costs in several ways, mostnotably by substantially lowering fuelconsumption and reducing the need formaintenance. In addition, the unit iscompact and highly transportable. “Soaring, unstable fuel prices create
demand for plants that are increasinglyenergy efficient and for new ways tooperate. However, you can onlyincrease the efficiency of a singlemachine up to a certain limit. Goingbeyond that point requires out-of-thebox thinking and new innovations,”said Jarmo Vuorenpää, project manag-er at Metso Mining and Construction,describing the design process.The Lokotrack LT220D is designed
with aggregate contractors in mind,
who often haul equipment on a weeklybasis while striving to keep costs down.Because of its transportability, theLokotrack LT220D enables contractorsto take on smaller contracts that previ-ously would have been unprofitable forthem.“The Lokotrack LT220D is the first-
ever track-mounted crusher/screencombination with such compactdimensions and good transportability,”Vuorenpää said.
Proven Equipment, NewFramework
The fuel economy of the LokotrackLT220D is the sum of several features.Running both the crusher and thescreen with a single Cat C13 309-kWdiesel engine clearly makes a big dif-ference. An efficient power transmis-sion system enables maximum powerfor operating. The result is decreasedfuel consumption with no compromis-es on capacity, according to the manu-facturer.Meanwhile, a reduced number of
transported units and a quick set-uptranslate into an increase in effectiveproduction time. Hydraulically operat-ed screen lifting and folding side con-veyors enable the Lokotrack LT220Dto be ready for action in just minutes.The total weight of 48 tons (43.5 t) andthe compact transport dimensionsmake the Lokotrack LT220D easilytransportable around the world, givingcontractors plenty of flexibility with theunit. The Lokotrack LT220D is equipped
with a Metso cone crusher, either theHP200 or the GP220. An intelligentcontrol system ensures safe and reliableprocesses in all applications. Pairedwith Metso's Lokotrack LT106 mobilejaw plant, the new secondary unit iscapable of producing up to three cali-brated end products.For more information, visit
www.metso.com.(This story also can be found on
Construction Equipment Guide’s Web
site at www.constructionequipment-
guide.com.)
Metso Combines Cone Crusher WithScreen in Its LT220D Mobile Crusher
Pages 69-81
Crushing, Screening & Recycling SectionFor more information on crushing, screening and recycling equipment, visit CEG's Web site at www.constructionequipmentguide.com.
The total weight of 48 tons (43.5 t) and the compact transport dimensions make the Lokotrack LT220D easilytransportable around the world.
Terex Environmental Equipment has appointed ConorHegarty as international sales director, outside ofNorth America.
Page 70 • May 24, 2014 • www.constructionequipmentguide.com • Recycling Section • Construction Equipment Guide
Superior Highlights Road Portable RazerTail Truck UnloaderSuperior Industries Inc., a manufacturer
of conveyor systems and their related com-ponents recently highlighted its growingline of portable truck unloaders. Known asthe RazerTail truck unloader, these unitscontrol segregation as material is trans-ferred from truck to stockpile.Superior’s RazerTail truck unloader is
known for its portability from site to site.In minutes, units can be adjusted fromhighway mode and ready for truck traffic.To speed setup, Superior engineers recent-ly developed sets of onboard truck ramps,which eliminate the requirement for mate-rial producers to incorporate earthen rampsfor truck access to the hopper grates,according to the manufacturer.Each RazerTail truck unloader is
equipped with a set of self-cleaning ramps.These hydraulically operated ramps can beautomatically triggered to dump anyspilled material into the hopper after atruck’s exit. This controls maintenanceneeds traditionally required around thehoppers of truck unloaders.RazerTail truck unloaders are available
for bulk handling applications up to 2,000tons per hour (1,814 tph). Units come inbelt widths of 48 or 72-in. (122 or 183 cm)and can accommodate material sizes from
fine sand to lumps up to 8 in. (20 cm)minus. An adjustable height discharge con-veyor can be incorporated into themachine, which eliminates the need for atransfer conveyor between the truck
unloader and stockpile conveyor or otherloading equipment. Depending on therequirements, the RazerTail truckunloader’s discharge conveyor can extendup to 12-ft. 8-in. (3.9 m).
For more information, call 320/589-2406 or visit www.superior-ind.com.
(This story also can be found on
Construction Equipment Guide’s Web site at
www.constructionequipmentguide.com.)
RazerTail truck unloaders are available for bulk handling applicationsup to 2,000 tons per hour (1,814 tph). Units come in belt widths of 48or 72-in. (122 or 183 cm) and can accommodate material sizes fromfine sand to lumps up to 8 in. (20 cm) minus.
Powerscreen Warrior 2100 Features Triple-Shaft TechnologyThe new Powerscreen Warrior 2100 screen fea-
tures Powerscreen’s triple-shaft technology firstdeveloped for the Warrior 2400 and exclusive toPowerscreen heavy-duty mobile screens. The triple-shaft technology has a 16 by 5 ft. (4.8 by 1.5 m)screen box and amplitudes and accelerations of16mm and 6g respectively. Media solutions includebofor grizzly, finger modules, punch plate and new3D punch plate for scalping, screening and recycling.Adjustable speed, stroke and timing further enhancesversatility and performance in recycling, biomassand aggregates, according to the manufacturer.Conveyors feature excellent stockpiling heights, a
chassis riser and telescopic side conveyor option, aclass-leading screen box raise function, ability toraise the collection conveyor. Chute design withfeeder under-tray slide-out minimizes spillage andmaterial build-up around the machine. The long tailconveyor feeds a secondary plant without benchingin almost all applications. Other features include reduced setup and shut-
down times, reduced fuel consumption with 1800rpm running speed and enhanced hydraulics, andtwo-speed tracking with automatic high-speedengine ramping. It is powered by Tier III/Stage IIIACat C4.4 ATAAC or Tier IVi/Stage IIIB Cat C4.4.For more information, visit www.terex.com.(This story also can be found on Construction
Equipment Guide’s Web site at www.construc-
tionequipmentguide.com.)
Media solutions include bofor grizzly, finger modules, punch plate and new 3D punch plate for scalping, screening andrecycling.
Construction Equipment Guide • Recycling Section • www.constructionequipmentguide.com • May 24, 2014 • Page 71
Thedesiredimpactimpact
The Metso Lokotrack® LT1213STM is a fully equipped mobile impactor plant with a high-capacity single deck screen and return conveyor.
proven performance and reliability
20% lower fuel consumption
superior mobility
ensure easy and safe operation
For more information, contact your local Metso distributor today.
www.metso.com/lokotrack
New Lokotrack® LT1213S™
The Lokotrack LT1213S mobile impactor plant with screen and return conveyor delivers maximum productivity and jobsite � exibility
3402 36th St. SWFargo, ND 58014
701-280-3100
800-726-7475
3630 Miriam Ave.Bismarck, ND 58501
701-223-0890
2803 I-94 BusinessLoop E
Dickinson, ND 58601701-456-1400
1201 S. 46th St.Grand Forks, ND 58201
701-775-4238
1505 Hwy 2, Bypass EMinot, ND 58701
701-852-3508
4950 E Highway 12Aberdeen SD 57401
605-225-6240
3601 Deadwood Ave. NRapid City, SD 57702
605-342-4850
20571 Truck Stop Ave.Pierre, SD 57501
605-224-5400
3201 N. Louise Ave.Sioux Falls, SD 57107
605-336-3010
RB SCOTT COMPANY INC.
www.rbscott.com1011 Short St.
Eau Claire, WI 54701715-832-9792
Fax: 715-832-7767
CENTRAL SERVICE
& SUPPLY, INC.www.centralsands.com
4219 E. 50th St.Des Moines, IA 50317
800-247-2400
515-964-8600
Fax: 515-309-0667
ROAD BUILDERSMACHINERY & SUPPLY CO.,
INC.www.roadbuildersmachinery.com
1001 S. 7th St. TrafficwayKansas City, KS 66105
913-371-3822
Fax: 913-371-3870
4115 S. 90th St.Omaha, NE
402-331-9200
5601 Fletcher Ave.Lincoln, NE
402-325-0447
4949 Juergen Rd.Grand Island, NE
308-384-2620
BUTLER MACHINERY CO.www.butlermachinery.com
3600 N. Grand RiverAve.
Lansing, MI 48906517-321-8000
Fax: 517-321-4191
www.aisequip.com
Grand Rapids600 44th Street S.W.Grand Rapids, MI
49548616-538-2400
Fax: 616-538-0449
Northeast Detroit65809 Gratiot AvenueLenox, MI 48050
586-727-7502
Fax: 586-727-7311
Saginaw4600 AIS DriveP.O. Box 253
Bridgeport, MI 48722989-777-0090
Fax: 989-777-1583
Traverse City8300 M-72 East
Williamsburg, MI 49690231-267-5060
Fax: 231-267-5257
West Detroit, MI56555 Pontiac Trail
New Hudson, MI 48165248-437-8121
800-457-8121
AIS CONSTRUCTION EQUIPMENT CORP.
Page 72 • May 24, 2014 • www.constructionequipmentguide.com • Recycling Section • Construction Equipment Guide
Brandeis Machinery& Supply Co.
www.brandeismachinery.com
28775 Beck Rd.Wixom, MI 48393(248) 449-6700
Fax: (248) 449-6701
2470 W. Columbia Ave.Battle Creek, MI 49015
(269) 965-1269Fax: (269) 965-1881
8840 Byron Commerce SWByron Center, MI 49315
(616) 878-7450Fax: (616) 878-7650
4716 Talono Ct. S.E.Kentwood, MI 49512
(616) 698-2960Fax: (616) 698-2901
6327 Jomar Ct.Lansing, MI 48917
(517) 272-5033Fax: (517) 272-7257
5920 Grand Haven Rd.Muskegon, MI 49441
(231) 798-9754Fax: (231) 798-9387
28855 Smith Rd.Romulus, MI 48174
(734) 641-8238Fax: (734) 641-8334
1524 Champagne Dr.Saginaw, MI 48604
(989) 752-9400Fax: (989) 752-9834
7500 E. 15 Mile Rd.Sterling Hts., MI 48312
(586) 977-6000Fax: (586) 977-6099
476 US 31 SouthTraverse, MI 49685
(231) 943-3700Fax: (231) 943-8110
56195 Pontiac TrailNew Hudson, MI 48165
(248) 356-5200Fax: (248) 356-2029
9433 Riley St.Zeeland, MI 49464
(616) 748-4108Fax: (616) 748-4120
Alta EquipmentCompany
www.altaequipment.com
Evansville, IN(812) 425-4491
Ft. Wayne, IN(260) 489- 4551
Indianapolis, IN(317) 872-8410
Corbin, KY(606) 528-3700
Lexington, KY(859) 259-3456
Louisville, KY502) 491-4000
Paducah, KY(270) 444-8390
Stanville, KY(606) 478-9201
CONTACT US TODAY FOR A PERSONAL DEMONSTRATION
Murphy Tractor & Equipment Co.www.murphytractor.com
5087 E. Broadway Ave.Des Moines, IA 50317-4744Toll Free: (800) 822-2212
1303 3rd Ave. NWFort Dodge, IA 50501-2257Toll Free: (800) 362-2487
4900 Harbor Dr.Sioux City, IA 51111-1106Toll Free: (800) 352-4693
3469 W. Airline HwyWaterloo, IA 50703-9594Toll Free: (800) 772-2019
10893 112 Rd.Dodge City, KS 67801-6585Toll Free: (800) 794-0172
325 S. Highway 281Great Bend, KS 67530-9621Toll Free: (800) 264-4056
5255 N Deere RdPark City, KS 67219
Toll Free: (800) 262-0139
1621 NW Gage Blvd.Topeka, KS 66618-2831
Toll Free: (800) 279-6087
1410 W. Oklahoma Ave.Ulysses, KS 67880
Toll Free: (800) 472-9238
8600 NE Parvin Rd.Kansas City, MO 64161-8300
Toll Free: (888) 306-3434
1401 S. State Highway MMSpringfield, MO 65802-7726
Toll Free: (888) 306-2656
220810 Hwy 92Gering, NE 69341-5236
Toll Free: (800) 205-6784
3204 S. Engleman Rd.Grand Island, NE 68803-6621
Toll Free: (800) 868-4017
6100 Arbor Rd.Lincoln, NE 68517-3211Toll Free: (800) 416-5518
3701 S. Jeffers St.North Platte, NE 69101-7844
Toll Free: (800) 894-7060
9751 S. 148th St.Omaha, NE 68138-3898
Toll Free: (800) 416-5095
1240 Industrial Pkwy N.Brunswick, OH 44212-4317Toll Free: (800) 716-9796
60611 Hulse Rd.Cambridge, OH 43725-8937
(740) 439-2747
1509 Raff Rd. SWCanton, OH 44710-2321Toll Free: (866) 235-0438
5775 US Highway 23Chillicothe, OH 45601-9562
(740) 663-5300
11441 Mosteller Rd.Cincinnati, OH 45241-1829Toll Free: (800) 844-3734
2121 Walcutt Rd.Columbus, OH 43228-9575Toll Free: (800) 222-2010
3550 Saint Johns Rd.Lima, OH 45804-4017
Toll Free: (800) 423-7445
811 Callendar Blvd.Painesville, OH 44077-1218Toll Free: (866) 800-1398
590 E. Western Reserve Rd. Bldg 3Poland, OH 44514-3393Toll Free: (866) 503-7259
1015 Industrial Park Dr.Vandalia, OH 45377-3117Toll Free: (800) 233-4228
20400 Route 19Cranberry Township, PA 16066
(724) 776-3636
1973 Route 66Greensburg, (Delmont) PA 15601-9297
(724) 837-4500
3630 Miriam Ave.Bismarck, ND 58501
701-223-08907910 Highway 2W
Devils Lake, ND 58301701-665-3800
2803 I-94 Business Loop EDickinson, ND 58601
701-456-14003402 36th St. SWFargo, ND 58104701-280-3100800-726-7475
1201 S. 46th St.Grand Forks, ND 58201
701-775-423817040 Hwy 11
Hankinson, ND 58041701-242-7474
7695 Highway 18 S.Hoople, ND 58243
701-894-63631910 27th Ave SE
Jamestown, ND 58401701-251-1400
1505 Hwy 2, Bypass EMinot, ND 58701701-852-3508
4950 E. Highway 12Aberdeen, SD 57401
605-225-62401715 US Hwy 14 W.Huron, SD 57350605-353-1200
20571 Truck Stop Ave.Pierre, SD 57501605-224-5400
3601 Deadwood Ave. NRapid City, SD 57702
605-342-48503201 N. Louise Ave.
Sioux Falls, SD 57107605-336-3010
www.fabickcat.com
One Fabick DriveFenton, MO 64026800-845-9188
Foristell, MO800-539-9217Columbia, MO800-791-5401
Jefferson City, MO800-845-9177Springfield, MO888-959-2100
Joplin, MO866-313-1748
Willow Springs, MO866-628-1717
Cape Girardeau, MO800-845-9175
Marion, IL800-845-9179Metropolis, IL866-299-6044
Salem, IL800-845-9176
Troy, IL866-345-5681Mt. Carmel, IL888-769-7247
www.fabco.com
11200 W. Silver Spring Rd.Milwaukee, WI 53225
414-461-9100Fax: 414-461-8899
Madison, WI608-271-6200
LaCrosse, WI608-783-4891Eau Claire, WI715-874-5100Wausau, WI715-359-6220
Green Bay, WI920-498-8000Superior, WI715-398-9696Marquette, MI906-475-4191
www.zieglercat.com
MINNESOTABRAINERD
3311 Liberty LaneBrainerd, MN 56401
218-829-9800877-829-9850
BUHL10081 East Hwy 169
Buhl, MN 55713218-258-3232800-446-9795COLUMBUS
13822 West Freeway DriveColumbus, MN 55038-9705
651-982-5600866-982-5656CROOKSTON
720 3rd Ave SWCrookston, MN 56716-0538
218-281-4245800-422-5782
DULUTH210 Garfield Ave.
Duluth, MN 55802-2696218-722-6628800-421-3831FERGUS FALLS
3502 State Hwy 210 WestFergus Falls, MN 56537-4003
218-736-2680800-346-7649MANKATO
2145 Howard Drive WestMankato, MN 56003
507-388-1444877-845-3938
Fax: 507-388-5909MARSHALL
1200 North Hwy 59Marshall, MN 56258-2761
507-532-4403MINNEAPOLIS
901 West 94th StreetMinneapolis, MN 55420-4236
952-888-4121800-352-2812
ROCHESTER6340 Hwy 63 South
Rochester, MN 55904-8414507-285-1775800-247-1068ST. CLOUD
2225 255TH StreetSt. Cloud, MN 56301-8742
320-253-2234800-522-9469
IOWAALTOONA
1500 Ziegler Drive NWAltoona, IA 50009-7200
515-957-3800800-342-7002ATLANTIC
951 Park DriveAtlantic, IA 50022712-243-1039877-547-3819FORT DODGE
3366 5TH Ave. SouthFort Dodge, IA 50501-6428
515-576-3161800-342-1848MASON CITY
11490 265TH StreetMason City, IA 50401-9656
641-423-7240800-342-1849POSTVILLE
308 North LawlerPostville, IA 52162-7802
563-864-7461800-526-0889SHELDON
102 Crossroads DriveSheldon, IA 51201712-324-5604855-344-5604SIOUX CITY
5300 Harbor DriveSioux City, IA 51111-1114
712-252-4401800-342-1847
Construction Equipment Guide • Recycling Section • www.constructionequipmentguide.com • May 24, 2014 • Page 73
www.whayne.com
1400 Cecil AveLouisville, KY502-774-4441
Ashland, KY606-928-3444
Bowling Green, KY270-843-3275Corbin, KY
606-528-3140Dry Ridge, KY859-823-1500
Evansville, IN812-425-4651Hazard, KY
606-439-4040Lexington, KY859-254-2756Paducah, KY
270-443-3631Pikeville, KY
606-437-6265
www.altorfer.com
2600 6th Street S.W.Cedar Rapids, IA 52404
319-365-0551Fax: 319-365-5639
4712 Buckeye St.Davenport, IA 52802
563-324-1935Fax: 563-324-2409
#1 Capitol Dr.East Peoria, IL 61611
304-694-1234Fax: 309-694-4148
4200 Rodger StreetSpringfield, IL 62705
217-529-5541Fax: 217-529-00201519 W. Kenyon Rd.Urbana, IL 61801
217-539-1671Fax: 217-359-63103520 Moberly Ave.Hannibal, MO 63401
573-221-8600Fax: 573-221-7187701 Highway 24WMoberly, MO 65270
660-263-8200Fax: 660-263-8203
www.macallister.com7515 East 30th St.
Indianapolis, IN 46219800-382-1896
Fort Wayne, IN800-944-0847South Bend
800-685-9849Lafayette, IN
800-283-4231Washington, IN800-932-5120Terre Haute, IN800-273-5650
www.ohiocat.com Cleveland, OH440-526-6200800-837-6200
Fax: 440-526-9513
Cadiz, OH740-942-4626800-837-6204
Fax: 740-942-4029Canton, OH
330-478-6525800-837-6207
Fax: 330-478-6529Cincinnati, OH513-771-0515888-332-4658
Fax: 513-672-7658
Columbus, OH614-878-2287888-441-4658
Fax: 614-851-5015Toledo, (Perrysburg) OH
419-874-7975888-339-4658
Fax: 419-873-8255Troy, OH
937-335-7660888-330-4658
Fax: 937-335-6447
Youngstown, OH330-530-9010800-837-6203
Fax: 330-530-9102Zanesville, OH740-453-0563800-837-6205
Fax: 740-452-3605Richwood, KY859-372-4665888-446-4658
Fax: 740-452-3605
Page 74 • May 24, 2014 • www.constructionequipmentguide.com • Recycling Section • Construction Equipment Guide
Crush. Classify. Profit.
CRUSHING PLANTS
Closed-circuit PLANTS
CRUSHING PLANTS
SCREENING PlantsWe Call It EXPERTISE. You Call It PEACE OF MIND.
IROCK knows the demands of your industry. Not just because we hear it, but because we’ve seen it and lived it, too. Our team of experts has years of hands-on experience working in your business and providing superior service. So when it comes to increasing efficiencies, reducing wear and boosting your bottom line, we're confident we have the right answers.
For more information, call 866-240-0201 or see our equipment in action at www.irockcrushers.com.
w w w . i r o c k c r u s h e r s . c o m
Construction Equipment Guide • Recycling Section • www.constructionequipmentguide.com • May 24, 2014 • Page 75
1-800-952-0178
worldwide network of authorized Bandit dealers.processing equipment is a
s toughest,y’The industr
worldwide network of authorized Bandit dealers.vailable through the processing equipment is a
longest lasting woo s toughest,
ale th
od
boost your operation’ or rec, grinder r,,chipper,
Contact yours today and see how a Bandit
SMALL EQUIPMENT DEALERS
s bottom line.boost your operation’ler can help yc or rec
Contact yours today and see how a Bandit
USH CHIPPERS,(BRSMALL EQUIPMENT DEALERS
dit
AC) ARBORVVAC) STUMP GRINDERS,USH CHIPPERS,
1-800-952-0178
LARGE EQUIPMENT DEALERS
TREE CHIPPERS,WHOLE (BEAST(BEAST,LARGE EQUIPMENT DEALERS
Y MOWERS) FORESTRTREE CHIPPERS,
For large equipment inquiries in OH,
630-293-0606 ILgo,est ChicaW
708-596-8050 ILMokena,
ax: 847-678-3587F847-678-3633
IL 60176ark,Schiller P River Rd.5050 N.
M IA, , MN, IL, , IA, Y, KY,, IL, Y IL, Y, IL, IN, , KYFor large equipment inquiries in OH,
Little Canada,t.comtlasbobca.awww
630-553-0150 ILorkville,YYorkville,
847-526-4522 ILauconda,W
or if your region is not represented abo WI and MI, , or if your region is not represented abo MN,
877-331-0295651-407-3727
MN 55117Little Canada,3101 Spruce St.
877-262-2284952-894-0894
MN 55337Burnsville, Hwy 13.W1800
.tristawww
866-268-2418715-531-0801
Hudson,745 Exchange Drive
ve, or if your region is not represented abo
t.comtebobca.trista
866-268-2418715-531-0801
54016 WI Hudson,745 Exchange Drive
please call us or visit us online for assistance.ve,, please call us or visit us online for assistance.
304-534-5454 WVairmont,F
304-204-1818 WVLanes,Cross
304-255-1525 WV,ver,Bea
304-226-3299 WVwen,Co
please call us or visit us online for assistance.
lec1.com.www
304-204-1818 OHMarietta,
304-255-1525 WVPikeville,
304-226-3299 WVNorton,5050 N. River Rd.
Schiller Park, IL 60176847-678-3633
Fax: 847-678-3587
Mokena, IL708-596-8050
West Chicago, IL630-293-0606
Wauconda, IL847-526-4255
Yorkville, IL630-553-0150
www.atlasbobcat.com
1800 W. Hwy 13Burnsville, MN 55337
952-894-0894877-262-2284
3101 Spruce St.Little Canada, MN 55117
651-407-3727877-331-0295
745 Exchange DriveHudson, WI 54016
715-531-0801866-268-2418
NEW LOCATION COMING SOON!1200 East Hwy 13
Burnsville, MN 55337952-894-0894
www.tristatebobcat.com
Ashland, KY606-928-3477
Cowen, WV304-226-3299
Beaver, WV304-255-1525
Cross Lanes, WV304-204-1818
Fairmont, WV304-534-5454
Norton, WV304-636-6421
Pikeville, KY606-432-0321
www.lec1.com
Page 76 • May 24, 2014 • www.constructionequipmentguide.com • Recycling Section • Construction Equipment Guide
Purpose-builtfrom the ground up byMaterial handlers from SENNEBOGEN – 44,000 lbs. to 750,000 lbs.
Simple design… Lift more. Move faster. Save fuel. Run longer. , 0 0 0 44 . , l0 0 0 0 75 7 o ts b l .sbl
S i m p l e d e
e s i g n … L i ft ft mor
re . Mov e faster.
. Sa v e f u e l . Ru n
n longer.
Muskegon, MI231-798-8754
Kentwood, MI616-698-2960
Battle Creek, MI269-965-1269
New Hudson, MI248-356-5200
Romulus, MI734-641-8238
Saginaw, MI989-752-9400
Sterling Hts, MI586-977-6000
Traverse, MI231-943-3700
Zeeland, MI616-748-4108
Lansing, MI517-272-5033
Wixom, MI (Cons. Division)248-356-5200
Byron Center, MI616-878-7450
Louisville, KY 502-491-4000
Evansville, IN812-425-4491
Corbin, KY606-528-3700
Lexington, KY859-259-3456
Stanville, KY606-478-9201
Paducah, KY270-444-8390
Indianapolis, IN317-872-8410
Ft.Wayne, IN260-489-4551
HOWELL TRACTOR &EQUIPMENT
LLCwww.howelltractor.com
Gary,IN800-852-8816
Peru, IL800-342-6072
GIBSON MACHINERY
LLCwww.gibson
machinery.com
Cleveland, OH440-439-4000
Pittsburgh, PA 724-695-5000
MURPHYTRACTOR &EQUIPMENT
CO.murphytractor.com
Cincinnati, OH800-844-3734
Vandalia, OH800-233-4228
Carterville, IL618/985-3399
Bridgeton, MO314-291-1330
Columbia, MO573-814-0083
Cape Girardeau,MO
573-334-5252
Palmyra, MO573-769-2056
Franksville, WI262-835-2710
DePere, WI920-532-0165
DeForest, WI608-842-4151
Eau Claire, WI715-874-5400
Schofield, WI715-355-9898
Escanaba, MI906-786-6920
THE VICTORL. PHILLIPS
CO.www.vlpco.com
Kansas City, MO 800-878-9290
Joplin, MO800-878-8223
Brookline Station,MO
800-955-2729
Wichita, KS800-878-3346
Topeka, KS800-878-4345
Garden City, KS 800-511-1435
Savage, MN 800-888-9515
Des Moines, IA 800-555-1445
Cedar Rapids, IA 800-616-6615
Sioux City, IA 800-633-9104
Milan, IL 800-633-9114
Duluth, MN 800-888-9535
Virginia, MN 800-752-4304
Bismark, ND800-247-1282
Dickinson, ND888-418-2873
Fargo, ND800-342-4330
Omaha, NE866-733-1100
Minot, ND701-852-3188
Rapid City, SD888-388-0266
Sioux Falls, SD800-262-5373
Williston, ND877-570-4635
Lincoln, NE866-801-6261
ALTA EQUIPMENT COMPANYwww.altaconstructionequipment.com
BRANDEIS MACHINERY & SUPPLY COMPANY
www.brandeismachinery.com
ROLAND MACHINERY CO.www.rolandmachinery.com
ROAD MACHINERY & SUPPLIES CO.
www.rmsequipment.com
TITAN MACHINERYwww.titanmachinery.com
Construction Equipment Guide • Recycling Section • www.constructionequipmentguide.com • May 24, 2014 • Page 77
MC 110 Zi EVO MC 110 Ri EVO
Continuous Feed System High-tech jaw crusher Direct drive via fluid clutch
THE LEADER IN TECHNOLOGY: THE NEW MC 110 EVO
High production, quality product with maximum effi ciency, the all new Kleemann EVO jaw crusher.
www.wirtgenamerica.comROAD AND MINERAL TECHNOLOGIES
Springfield, Illinois816 N Dirksen ParkwaySpringfield, IL 62702Phone: 217-789-7711
Bolingbrook, Illinois220 East Frontage RoadBolingbrook, IL 60440Phone: 630-739-7474
Carterville, Illinois1505 Donna Drive
Carterville, IL 62918Phone: 618-985-3399
Marengo, Illinois18210 Beck RoadMarengo, IL 60152
Phone: 815-923-4966
Portage, Indiana6450 Melton RoadPortage, IN 46368
Phone: 219-764-8080
Escanaba, Michigan2600 S Lincoln RoadEscanaba, MI 49829Phone: 906-786-6920
DeForest, Wisconsin604 Stokely Road
DeForest, WI 53532Phone: 608-842-4151
DePere, Wisconsin3275 French RoadDePere, WI 54115
Phone: 920-532-0165
Eau Claire, Wisconsin7417 Margaret LaneEau Claire, WI 54703Phone: 715-874-5400
Franksville, Wisconsin2916 N Sylvania AveFranksville, WI 53126Phone: 262-835-2710
Schofield, Wisconsin9808 Weston AvenueSchofield, WI 54476Phone: 715-355-9898
Bridgeton, Missouri4670 Crossroads
Industrial Dr.Bridgeton, MO 63044Phone: 314-291-1330
Cape Girardeau, Missouri3364 Percy Drive
Cape Girardeau, MO63702
Phone: 573-334-5252
Columbia, Missouri4110 I-70 Drive SE
Columbia, MO 65201Phone: 573-814-0083
Palmyra, Missouri701 Industrial DrivePalmyra, MO 63461
Phone: 573-769-2056
Shepherdsville, KentuckyP.O. Box 6588
335 Saltwell DriveShepherdsville, KY 40165Toll Free: 877-538-3221Phone: 502-543-3746Fax: 502-543-3716
Evansville, IndianaFort Wayne, IndianaIndianapolis, Indiana
Corbin, KentuckyLexington, KentuckyLouisville, KentuckyPaducah, KentuckyStanville, Kentucky
Hayden-Murphy Equipment Company
www.hayden-murphy.com9301 E. Bloomington FreewayMinneapolis, MN 55420-3410
952-884-2301800-352-2757
Page 78 • May 24, 2014 • www.constructionequipmentguide.com • Recycling Section • Construction Equipment Guide
www.superior-ind.com
KING OF THE HILL
At Superior, we’re constantly searching for new ways to use our knowledge of bulk material handling systems to solve challenges and improve production. We’re driven by curiosity, loaded with determi-nation and energized by progress. How can we help you?
Proud partners of General Equipment & Supplies
Fargo, ND4300 Main Ave.Fargo, ND 58103800-437-2924Local: 701-282-2662Fax: 701-364-2190
Sioux Falls, SD3902 N Jessica Ave.Sioux Falls, SD 57104Local: 605-336-9000Fax: 605-336-0073
Bismarck, ND2300 Vermont Ave.Bismarck, ND 58504800-279-4437Local: 701-223-9700Fax: 701-223-4815
Shakopee, MN4600 Valley Industrial Blvd SShakopee, MN 55379800-966-1455Local: 952-224-1500Fax: 952-224-1570
Minot, ND905 20th Ave. SEMinot, ND 58701800-825-0479Local: 701-852-0479Fax: 701-852-1451
Official dealer partner of Superior Industries in North Dakota, South Dakota, Minnesota, Iowa & Nebraska
IROCK Launches New Web Site for Easier Use, Mobile AccessIROCK Crushers has launched a new
Web site. The new site, located atwww.irockcrushers.com, provides quickaccess to detailed product information tohelp customers make informed decisionsabout crushing and screening equipment.The mobile-friendly site also links cus-tomers to the latest technologies and industrynews. Visitors to www.irockcrushers.com can
easily sort product information by the type ofcrusher, screener or application. Each prod-uct page features typical applications anddetailed specifications including machineweight, engine type, processing capacitiesand stockpiling heights. Large photos andvideos of equipment in action are featuredthroughout the site, giving visitors the oppor-tunity to not only read about features andbenefits, but view them as well.
In addition to detailed product informa-tion and visuals, IROCK is using the newsite to keep current and potential customerswell informed on industry news and bestpractices.News stories and blog posts will be updat-
ed regularly with information to helpincrease profitability in industries such asaggregates, road building, mining, construc-tion and demolition, recycling, landscapingand mining. Visitors to www.irockcrushers.com can
quickly share info with colleagues, cus-tomers and others. Pictures, videos and bestpractices info can all be shared easily viaFacebook, Twitter and Google+. For more information, call 866/240-0201. (This story also can be found on
Construction Equipment Guide’s Web site at
www.constructionequipmentguide.com.)
Would you like your company featured inConstruction Equipment Guide?
If so, please contact us at: editorial@cegltd.com
Construction Equipment Guide • Recycling Section • www.constructionequipmentguide.com • May 24, 2014 • Page 79
12500 S. Cicero Ave.Alsip, IL 60803800-323-8761
Fax: 708-389-2963
Villa Park, IL630-530-7600
Rockford, IL815-227-0555
East Peoria, IL309-694-4455
Springfield, IL217-789-0351
McALLISTEREQUIPMENT CO.
ROAD MACHINERY& SUPPLIES CO.
5633 West Hwy 13Savage, MN 55378
800-888-9515Fax: 952-895-9564
315 North Hoover RoadVirginia, MN 55792
800-752-4304Fax: 218-741-9465
314 Garfield AvenueDuluth, MN 55802
800-888-9535Fax: 218-727-3340
2525 16th Avenue SWCedar Rapids, IA 52404
800-616-6615Fax: 319-363-2075
1400 N. Hwy 75Sioux City, IA 51105
800-633-9104Fax: 712-252-5064
100 Sheridan AvenueDes Moines, IA 50313
800-555-1445Fax: 515-282-4876
Page 80 • May 24, 2014 • www.constructionequipmentguide.com • Recycling Section • Construction Equipment Guide
Serving
IllinoisMidwest Crushing & Screening
7144 N Harlem Ave.
Chicago, IL 60631
midwestcrushandscreen@gmail.com
847.271.5027
IndianaPowerscreen Indiana, Inc.
255 N Hetzler Court
Angola, IN 46703
www.powerscreenindiana.com
313.841.8370
MichiganPowerscreen of Michigan
36639 Groesbeck Hwy.
Clinton Township, MI 48035
www.powerscreenofmichigan.com
586.229.2882
MinnesotaTheco, Inc.
5470 Quam Ave. NE
St. Michael, MN 55376
www.thecoinc.com
800.776.0335
OhioAGGCORP
22800 Lakeland Blvd.
Cleveland, OH 44132
www.aggcorp.net
614.309.6854
Construction Equipment Guide • Recycling Section • www.constructionequipmentguide.com • May 24, 2014 • Page 81
Transformsticky feedinto revenue.into revenue.
New Lokotrack® ST2.8™ mobile scalping screen
The new Lokotrack® ST2.8TM track-mounted scalping screen sets a new standard for transportability, capacity and accuracy in mobile scalping screens. It is the perfect choice for recycling applications and Lokotrack® multi-stage crushing processes, helping you transform even the toughest feed material into pro� t. Contact your local Metso distributor today.
www.metso.com/lokotrack
3402 36th St. SWFargo, ND 58014
701-280-3100
800-726-7475
3630 Miriam Ave.Bismarck, ND 58501
701-223-0890
2803 I-94 BusinessLoop E
Dickinson, ND 58601701-456-1400
1201 S. 46th St.Grand Forks, ND 58201
701-775-4238
1505 Hwy 2, Bypass EMinot, ND 58701
701-852-3508
4950 E Highway 12Aberdeen SD 57401
605-225-6240
3601 Deadwood Ave. NRapid City, SD 57702
605-342-4850
20571 Truck Stop Ave.Pierre, SD 57501
605-224-5400
3201 N. Louise Ave.Sioux Falls, SD 57107
605-336-3010
CENTRAL SERVICE
& SUPPLY, INC.www.centralsands.com
4219 E. 50th St.Des Moines, IA 50317800-247-2400515-964-8600
Fax: 515-309-0667
3600 N. Grand River Ave.Lansing, MI 48906
517-321-8000
Fax: 517-321-6275
Grand Rapids600 44th Street S.W.Grand Rapids, MI 49548
616-538-2400
Fax: 616-538-0449
Northeast Detroit65809 Gratiot AvenueLenox, MI 48050
586-727-7502
Fax: 586-727-7311
Saginaw4600 AIS DriveP.O. Box 253
Bridgeport, MI 48722989-777-0090
Fax: 989-777-1583
Traverse City8300 M-72 East
Williamsburg, MI 49690231-267-5060
Fax: 231-267-5257
West Detroit, MI56555 Pontiac Trail
New Hudson, MI 48165248-437-8121
800-457-8121
BUTLER MACHINERY CO.www.butlermachinery.com
AIS CONSTRUCTION EQUIPMENT CORP.
www.aisequip.com
Page 82 • May 24, 2014 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • May 24, 2014 • Page 83
The Easy Way To Advertise Your EquipmentValued At Less Than $1 Million Run In TwoConsecutive Issues For $95, Color Ad $145
2006 Gehl 7810 Turbo, 115HP, 2260 Hrs, 3675 LbLift, 84” Bkt, 2 Speed..................................$30,900
Call Scharber & Sons 763-428-410710-11 PKNew Compact Excavators ....Starting at $41,000
Call Dan 612-306-4496 10-11 PK
More Bargains on pg 84
2007 Kobelco SK290LC-LR, s/n YQ13U5369,4390 Hrs, 62’ Long Reach........................$129,000
Call David 219-696-5680 11 JM
2011 Bobcat S205, Encl Cab Heat A/C, Pwr Bob-Tach,Keyless St., BP, 188 hrs Garden City, KS EN 1049604 ..............................................................................................$32,800
800-950-3321 • www.whitestarmachinery.comWhite Star Machinery, Garden City, KS 11 JM
Bobcat S650, 742 Hrs, Enclosed Cab, Heat A/C, High FlowAuxiliary Hydraulics, M Series, 1048982 ..................$36,500
800-950-3321 • www.whitestarmachinery.comWhite Star Machinery, Manhattan, KS 11 JM
2012 Bobcat S185, Encl. Cab Heat A/C, Pwr Bob-Tach,Keyless St., K Series, 344 hrs, Topeka, KS EN 1053417............................................................................................$31,000
800-950-3321 • www.whitestarmachinery.comWhite Star Machinery, Garden City, KS 11 JM
2007 New Holland C190, 3241 Hrs, 81 HP, Cab w/Heat,2900# Capacity, 2 Speed, Cold Start, 9950 Lbs........$21,900
Call Steve Samosky • 262/373-2151 11 JM
“TRACKS FOR YOUR MACHINE!!” $7,000,000 Inventory of High-QualityRubber Tracks to fit over 3000 models of construction equip. PNEUMATICAND FLATPROOF SKIDSTEER TIRES also available. $95 Next day ship-ping to 23 states...........................................................................................Call
Summit Supply LLC888-888-1248 • sales@summittracks.us 11-12 TM
2010 335 Bobcat Mini-Excavator, 9170 Oper. Wt., 42 HP, CH,Thumb, Keyless, EN 1073837 .......................................$31,500
800-950-3321 • www.whitestarmachinery.comWhite Star Machinery, Manhattan, KS 11 JM
2001 Metal Works Trailer, 10,000# Capacity, 18’x72.5” FlatDeck, 12,000#GVWR, Elec. Brakes .............................$2,400
Call Steve Samosky • 262/373-2151 11 JM
2012 Wacker 28Z3, 75 Hrs, OROPS, Coupler, Aux. Hyd,Rubber, 9’ Dig Depth, 5680 Lbs................................$32,980
Call Steve Samosky • 262/373-2151 11 JM
2008 New Holland D85B LGP, 830 Hrs, Cab, A/C,6-Way Blade, 28” Shoes, 20,200 Lbs ............$61,750
Call Steve Samosky 262-373-2151 11 JM
Used 2010 S630 Bobcat Skid Loader, 74.3HP Turbo-Diesel, 549 Hrs, Tires Like New, 2-Speed, High-Flow, Cabw/Heat/AC, Switchable Controls, Stereo, Power Bob-Tach,Deluxe Instrumentation ...............................................$33,800
Top Notch Equipment 763-398-0079 11-12 PK
2005 Cat 287B, 1,485 hrs, OROPS, 82 hp, 10,300 lbs, 80”bkt, 2,520# capacity ..................................................$21,900
Call Steve Samosky • 262/373-2151 11 JM
2007 IR SD-45D Compactor, 54” Smooth Drum, DrumDrive, 10,600 Lbs......................................................$36,500
Call Steve Samosky • 262/373-2151 11 JM
2007 Kubota RTV1100, 4x4, heated cab with snow plow. 2Front Work Lights, Rear Work Light and Strobe. Workingradio. 2142 Hours ....................................................$10,500
Call Kevin at 855-510-6050 11 JM
2007 Ditch Witch XT1600, 221 Hrs, Tracks at90%, Excellent Condition ................................$49,500
Call Tim 630-665-5600 11 JM
2005 and 2006 Mack “Matched Pair”, 460 HP, 18Speed, 14,600 Front 46,000 Rear, Air Ride, 2Steerable Axles, “NEW” 18 ½ Crysteel Dump w/AR400 Floor and sides .........................................................................$89,750 per truck price includes FET
Check out www.mykwtrucks.com800-658-2324 Drew or Ron 10-11 PK
2009 Takeuchi TL250 80” Tooth Bucket, Cab, New Tracks,1990 Hrs ...................................................................$48,000
Call Jim Spicer • 309-275-8545Central Illinois Ag, Farmer City, IL 11 JM
Next Issue ClosesMay 29th
Page 84 • May 24, 2014 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
The Easy Way To Advertise Your EquipmentValued At Less Than $1 Million Run In TwoConsecutive Issues For $95
Here's how the BARGAIN ADS Work:
• Supply us with a photo of a machine (one machine per Bargain Ad) and a maximum 20 word description, plus contact and phone number.
• Either email your copy & photo to: production@cegltd.com, or mail to: Construction Equipment Guide, 470 Maryland Drive, Ft Washington, PA 19034.
• Cost is $95 per ad, $50 additional for color.
• Your ad will run for two consecutive issues in 1 region.
Your Ad Will Be Seen By Over 25,589 Construction Equipment Buyers in the Midwest States.
For more information, call Construction Equipment Guide today at 800/523-2200
2010 Gehl V270 Vertical Lift Skid Loader, Like New,One Owner, 785 Hrs, OROPS, ISO Joystick Controls,74” 22.8 Cu. Ft. HD Bkt, Custom Radiator Guard,Super Nice Machine! .......................................$29,900
Call George 219-696-8911 11 JM
1991 John Deere 300D, S/N 775834, Open ROPS....................................................................$19,000Call 502/456-4050 Ask for Melissa or Albert 11-12 EB
2004 Cedarapids 452, Front Wheel Assist TopconElectric 20’ Screed, 5546 Hrs..........................$87,500
Call 605-336-0411 11-12 PK
McLaren Rubber Tracks for Mini Excavators & TrackLoaders, The Most Trusted Brand in America Brings YouQuality Tracks for your Specific Make and Model
Call McLaren 888-492-4230 11 FS
1981 Grove Rt 755, 55 Ton S/N # 49225,Cummins Rebuilt, 110’ Main Boom, 32’ Jib,
Auxilliary Hoist, 5 Sheave Block, Cleveland OhioCall Andy 216-316-1511 11-12 EB
1993 Grove Rt 422,22 Ton S/N # 78334,Cummins 4 Cyl12,100 Hours, 3Speed Transmission,27’-70’ Main Boom,25’-43’ Jib, AuxilliaryHoist,17.5 X 25 Tires,Ball, New Rotec,Boom Scope CylinderRebuilt, Fresh GrovePaint, Cleveland Ohio
Call Andy 216-316-1511
11-12 EB
2012 Case 850L, s/n NCD80092, 700 Hrs, Cabw/Heat & AC, 124” Blade, 24” Grousers ..$120,000
Call Mark 630-739-7770 11 JM
2007 Case 450, s/n N7M446035, 2250 Hrs, ROPSAux Hyds, 72” Bkt, 12x16.5 Tires...............$22,900
Call Jamie 630-310-7639 11 JM
2012 Case SV185, s/n JAFSV185CBM443612,Cab w/Heat, Two Speed, 72” Bkt, 12x16.5 Tires..........................................................................$31,500
Call Mark 630-739-7770 11 JM
2006 Ditch Witch FX60 Vacuum Excavator, 800 galspoils capacity, 200 gal water tank, 4 cylinder Cumminsengine, 3251 hours ..............................................$32,500
Call Tania 614-443-9751 x237 11-12 EB
2012 Cat 289C MTL, EROPS, Heat, 2 Speed, 900Hrs ..............................................................$52,500
Courts Machinery • 507/678-2752 11-12 PK
SEE YOUR BARGAIN AD INCOLOR
ONLY $50 EXTRA FOR TWO INSERTIONS
CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • May 24, 2014 • Page 85
Classified Rates:30 Words or Less for $30.00. Each Additional Word is 95¢.For just an additional $20 your ad can be posted on
our online searchable database for 30 daysAd runs for 2 (two) insertions - no changes in second insertion.
PLEASE ENCLOSE PAYMENT WITH ORDER and mail to:470 Maryland Drive• Fort Washington, PA 19034
215/885-2900 • Fax 215/885-2910 • Toll Free 1-800/523-2200
CLASSIFIEDS
ASPHALT EQUIPMENT
Asphalt Cutters
Attachments International
ASPHALT CUTTERS
SEVERE SERVICE
HIGH SPEED
ASPHALT CUTTER
Skid Steers,
TLB, Loaders,
Excavators
14 Models Available
''24-48 hour shipping''
Large Oder for RUSSIA #30 Extreme
Cutters Cancelled!
Price cut in half, Now-$1,999.00
Call 218-863-6444
www.attachmentsintl.com
www.attachmentsusa.com
BUCKETS
Clamshell Bucket
2010 Anvil Clamshell bucket, 4.5 CYD, 360
Rotation, 13K in repairs, excellent condi-
tion, like new ................................$24,999.
219-977-4210
Excavator Bucket
2006 CF, Badger, ESCO buckets for
EX160, 200, 270, 300 & 450. All used.
Bucket clearance ............................P.O.R.
219-977-4210
LOADERS
Backhoe Loaders
2008 Yanmar CBL40, PTO, 3pt. Hitch,
backhoe, loader bucket attached w/ skid
plate, great condition, 216 hours ......CALL
............................................641-628-2000
2000 JCB 3CX-15, Cab/AC, Tier 3 engine,
100 HP, Power shift trans, 1.4 GP Bkt,
4WD/2WS, Servo Controls Backhoe
Loader Hydraulics, mint condition$83,500.
908-625-0697
2000 JCB 210S, S/N 0489890, well main-
tained, working breaker and tamper avail-
able, includes buckets, good condition,
5620 hrs ......................................$14,995.
Fairchild JCB
920-494-8726
2011 John Deere 319D compact loader,
12'' track, Cab w/ AC/heater, Aux. Hyds.,
Turbo, 934 hours regular maintenance......
....................................................$32,500.
2003 John Deere 310G, 1 yd. loader bkt, 2
lever controls, 19.5 x 24 tires, regular main-
tenance, 2780 hours....................$37,950.
316-945-1015
Skid Steer Loaders
2012 JCB 260W, Cab w/ Heat/AC, Tier 3
engine, 7 way servo controls, Aux
hydraulics, foot throttle, quick hitch coupler,
mint condition ..............................$45,000.
908-625-0697
MATERIAL HANDLERS
Material Handlers
1999 Liehberr A932HD, S/N K8J5-9072,
good condition, located in PA., 17,968 hrs
..................................................$125,000.
Gibson Machinery, LLC
800-843-1205
RECYCLING EQUIPMENT
Crushing
2012 IROCK RDS 20, Closed circuit
portable impact crusher, double deck 5' x
16' screen plant, good condition, 1200 hrs
................................................$5550,000.
614-949-9296
TELEHANDLERS
Telescopic Handlers
JCB 515-40 S/N/1769054, Cab/Heat/AC,
4WD/4WS, lifts 3,300 lbs @ 13.2'', 50 HP,
skid-steer coupler, 2 speed hydro trans,
mint condition, low hours .............$55,000
908-625-0697
TRAILERS
Trailers - Misc.
2013 Landoll Trailer 835-32, 53' long - 32'
well w/ alum pull outs. New ..Call for price.
Midwest Trailers Plus
888-560-2787
2011 Felling FT14-2, 23 ft. Deckover tilt,
white oak plank deck w/ side tool box and
22 pockets, used condition ..........$10,999.
2010 PJ,tandem 7000 lb. axles for skid
steer, 7W x 20+2, 14 pockets, 8 rings, 5 ft
mesh ramp, used condition............$5,700.
1994 Kiefer Gooseneck, tandem axles,
101'' W x 27" L + 5 ft. used condition ........
......................................................$6,500.
Toppers Plus
507-387-7376
EMPLOYMENT OPPORTUNITY
District ManagerMagnum Attachments Inc., a leading
Distributor of Hydraulic Attachments, has anoutstanding opportunity for a District Managerfor the Midwest United States.
As a District Manager, the candidate will be responsible for managing sales of theMagnum Products through an authorized distribution network. The candidate will beresponsible for maintaining growth within existing distribution as well as establishing newdistribution channels.
The candidate should have prior experience in wholesale distribution, be self motivated, PCproficient (Microsoft Office) and willing to travel 75% of the time.
To learn more about our company and products, pleasevisit our website at www.magnumattachments.com.We offer a competitive remuneration package.Interested candidates may send their resume to:info@magnumattachments.com.
Service Technician
Murphy Tractor & Equipment Co.,Inc. in Waterloo, IA is seeking a full-time experienced heavy construc-tion equipment technician. RequiresHS diploma/GED & technical schooltraining &/or equivalent experience.
Excellent benefits & pay.
Apply athttp://murphytractor.com/careers/
EOE
Page 86 • May 24, 2014 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
CONSTRUCTION | WE WANT TO KNOWWHO OWNS MARSH BUGGIES, USEDMARSH BUGGIES AND WE PAY SEVER-AL $1, 000 FINDERS FEES IF THEIRINFO HELPS US FIND UNITS TO RENT,BUY OR SELL. PLEASE SEND WHATYOU HAVE.CONTACT: TYLER PALUMBOEMAIL: PALUMBO519@HOTMAIL.COM––––––––––––––––––––––––––––––––DUMP TRAILER | LOOKING FOR USED10-14 DUMP TRAILER 10K+ LBSCAPACITY. REASONABLY PRICED. LIVEIN THE ESCANABA, MI AREA, PICK UPWITHIN 100 MILES.CONTACT: RAY DISHNOPHONE: 906-241-7358EMAIL: RDISHNO2@YAHOO.COM––––––––––––––––––––––––––––––––WHEEL LOADERS | I AM LOOKING TOBUY USED CATERPILLAR WHEELLOADERS 920, 926, 930, 936, 938F/G,950B/C/E/F, 966C/D/E/F/H, 980C/F AND988B. IF YOU HAVE ANY, PLEASE SENDPICTURES, SERIAL NUMBER, CONDI-TION, LOCATION AND FINAL OFFERPRICE.CONTACT: AIMN BLBOLPHONE: +971504814823FAX: +97165355291EMAIL:INFO@ALWAFAEQUIPMENT.COM––––––––––––––––––––––––––––––––WB INSLEY CRANE | IM LOOKING FORTHE LAGGING OFF THE DRAG DRUM.CONTACT: JOHN CHRISTIANSONPHONE: 12318729117EMAIL:LILJOHNBIGSLICK@YAHOO.COM––––––––––––––––––––––––––––––––SKIDSTEER | HIGH FLOW SYSTEMWITH 18 INCH COLD PLANER, SWEEPER ATTACHEMENT AND WATER TANK KITCONTACT: MARCELEMAIL: MDCRUZ08.DC@GMAIL.COM––––––––––––––––––––––––––––––––NEEDED 12 MONTHS HEAVY EQUIP-MENT USER USA NOT ADVERTISED |NEEDED 12 MONTHS BULLDOZERCRAWLER EXCAVATOR GRADERLOADER 1975 TO 2013, NO OVERSEAS,RUN OR NOT NO KACKER ??? USACONTRACTORS NO SALESMAN ??PLEASECONTACT: JEAN MAURICE BOUTINPHONE: 1 450 346 8975 OR MOB 1 514 386 8975EMAIL:JEANMAURICEBOUTIN@VIDEOTRON.CA––––––––––––––––––––––––––––––––EAGLE 1400 | EAGLE 1400 PORTABLEIMPACTOR WITH DISCHARGE CONVEY-OR AND MAGNET DIESEL/ELECTRICCONTACT: JOEPHONE: 7249445569EMAIL: FJS-1@ATT.NET––––––––––––––––––––––––––––––––NEED TO BUY BACKHOE LOADERCONTACT: M.A.BARIPHONE: 77238974EMAIL: A.BARI76@YAHOO.COM––––––––––––––––––––––––––––––––
WE BUY MANUALS | WE ARE LOOKINGTO PURCHASE NEW OR USED SERV-ICE, SHOP, PARTS, OPERATOR’S OROTHER MANUALS FOR EQUIPMENT OFALL SORTS, BUT NOT INCLUDEDTRUCKS AND VEHICLES. WE PREFERIN BULK, PERHAPS YOU HAVE COM-PUTERIZED YOUR SERVICE OR PARTSOPERATION AND YOU HAVE BOOKSOR MANUALS YOU NO LONGER NEED,OR INVENTORIES YOU HAVE NOTSOLD. PERHAPS AS A DISCONTINUEDPRODUCT LINE. WE WILL PURCHASEIN ANY USEABLE CONDITION IN ANYAMOUNT YOU HAVE. CONTACT: GRACE FRANCESPHONE: 2708492270EMAIL: TRITOWN1@MSN.COM––––––––––––––––––––––––––––––––WHEEL EXCAVATORS | WE ARE LOOK-ING FOR DAEWOO 130W- 140W- 170W ;YEARS 1985 TILL 2004CONTACT: PENNINGS VOFPHONE: (0031)622492445EMAIL: PENNULAND@HOME.NL––––––––––––––––––––––––––––––––CASE 590 SUPER L FROM CONTRAC-TOR CAB 4X4 EXTENDAHOE | CASE 590SUPER L 4X4 CAB EXTENDAHOE PREFUNDER 5000 HOURSCONTACT: KEVIN SANSALONEPHONE: 856-692-0027EMAIL:KEVIN@SANSALONEEXCAVATING.COM––––––––––––––––––––––––––––––––TELEHANDLER | TELEHANDLER:LINEA: 644 TRACCION 4X4 / DOBLEMARCA : LULL CORP FROM MODEL1995 TO 2005 VIN : G3U4N11-3122SERIE: 4039DF001 VELOCIDADES :NEUTRAL HP. 99 /COULD BE BIGGER.CILINDROS : 04 / COULD BE BIGGERCOMUSTIBLE : DIESEL CC: 3.9 L ORBIGGER CAPACIDAD DE CARGA 2.7 TMMODELO G44 LINEA: HIGHLANDER IITONELAJE: 6000 LBS – 27´(8.23M) 4,000 LBS – 34´(10.36M) 1500 LBS MAXBOOM.CONTACT: CARLOS DE LEONPHONE: 50255179350EMAIL:CARLOS.DELEON@TRAEXA.COM––––––––––––––––––––––––––––––––AN AVERAGE USED DUMP TRUCK 2003-2005. FOR EXPORTCONTACT: EMMANUELPHONE: 3013669270EMAIL:BOLARINWAEMMANUEL@YAHOO.COM––––––––––––––––––––––––––––––––WOOD CHIPPER | AN INDUSTRIALSELF-FEEDER WANTED. PRICE RANGEOF $5,000 - $10,000.CONTACT: JERRY HINZPHONE: (517) 612-7951EMAIL: JERRYHINZ66@YAHOO.COM––––––––––––––––––––––––––––––––CRANES | WE ARE LOOKING FOR AFEW LATE MODEL 200-TON CLASSCRAWLER CRANES, PREFERABLYWITH A 3RD DRUM . SOME ACCEPT-ABLE MODELS: LINK-BELT LS-248H5KOBELCO CK-2000II MANITOWOC14000 TEREX HC-230 THANKSCONTACT: SANTIAGOPHONE: 3055064263EMAIL: SSCARZELLA@GMAIL.COM––––––––––––––––––––––––––––––––
KOMATSU | D21A-6CONTACT: DAVIDEMAIL: DHH.SUBS@GMAIL.COM––––––––––––––––––––––––––––––––GRADER | USED LEEBOY 635 OR SIMI-LAR COMPACT GRADER FOR FARMUSE. MUST BE RUNNING AND IN GOODCONDITION. HOPE TO PAY 5-15KCONTACT: SHAWNPHONE: 757-328-9664FAX: 757-514-0010EMAIL:SHUTTERBUG53@MAC.COM––––––––––––––––––––––––––––––––SURPLUS TOOL ROOM MACHINERY | IMLOOKING TO BUY USED AND SURPLUSTOOL ROOM MACHINERY I.E LATHES,MILLING, SHAPERS, GRINDERS,SPOTWELDERS, RADIAL DRILLS ETC.CONTACT: SAIFPHONE: 0092304 4245242EMAIL:CONTACTSAIFULLAH@YAHOO.COM––––––––––––––––––––––––––––––––WIWA DUOMIX PFP 333 | FIREPROOF-ING EQUIPMENT MANUFACTURED BYWIWA MODEL DUOMIX PFP 333CONTACT: MOHAMED NASSEFPHONE: +201001272202FAX: +203 4244486EMAIL:MOHAMED.NASSEF@UGMOS.COM––––––––––––––––––––––––––––––––MILLING MACHINES | CAT 450 AND 450-C MILLING MACHINES.CONTACT: TOM ROSSERPHONE: 610-888-0762EMAIL: TPROSS1947@GMAIL.COM––––––––––––––––––––––––––––––––MCCLOSKEY TRIMMED 407 OR 412SCREENERCONTACT: MICHAELPHONE: 609.922.0056FAX: 856.435.9006EMAIL:MJFMATERIALSLLC@AOL.COM––––––––––––––––––––––––––––––––OLD TRACTOR WITH ALL EQUIPMENTCONTACT: KISHOR DESHMUKHPHONE: 9423752589EMAIL: PLASTIC.SIDDHI84@GMAIL.COM––––––––––––––––––––––––––––––––CAT 450 AND 450-C MILLINGMACHINES.CONTACT: TOM ROSSERPHONE: 610-888-0762EMAIL: TPROSS1947@GMAIL.COM––––––––––––––––––––––––––––––––KOMATSU WA 320/ 380 WHEEL LOADER| LATE MODEL, UP TO 5000 HOURS, USLOCATION, WORK READYCONTACT: RICHARDPHONE: 603 828-6100EMAIL: CMISOLD1@COMCAST.NET––––––––––––––––––––––––––––––––HEAVY EQUIPMENT RUN OR NOT USERUSA ONLY | NEEDED 12 MONTHS FROM«CONTRACTORS ONLY« BULLDOZERD3AT D10 KOMASTU JOHN DEERELOADER 910 920 930 950 966 BULLDOZ-ER D3OR D4 1975 NO RUN LOADER 920930 950 966 NO RUN NO HAKER OFFICEOPEN 7AM TO 8PM 7 DAYSCONTACT: JEAN MAURICE BOUTINPHONE: 1 450 346 8975 OR MOB 1 514 38 68975EMAIL:JEANMAURICEBOUTIN@VIDEOTRON.CA––––––––––––––––––––––––––––––––
USED SKID STEER LOADER WITHBACKHOECONTACT: JOEEMAIL: JBLAZYKK@GMAIL.COM––––––––––––––––––––––––––––––––LOADER BUCKET | 1 3/4 YARD QUICKCOUPLER BUCKET FOR 1995 CATERPILLAR IT 18FCONTACT: RAY HALGASPHONE: 518-848-9023EMAIL: RAYHALGAS@YAHOO.COM––––––––––––––––––––––––––––––––CASE BACKHOE 2WD | I AM LOOKINGTO BUY CASE BACKHOE 2WD 580SK,580L, 580SL, 580M AND 580SM, SERIESI AND II IF YOU HAVE ANY FOR SALE,PLEASE SEND PHOTOS, SERIAL NUM-BER AND LOCATION. LOOKING FOR-WARD TO YOUR OFFERSCONTACT: RIZ SUNESARAPHONE: 832-528-0786FAX: 281-727-0415EMAIL:RIZ@MEGAEQUIPMENTS.COM––––––––––––––––––––––––––––––––INLINE SILAGE BAGGER | NOT JUSTTHE BAGS A GOOD USED MACHINECONTACT: RAMONA WARDEMAIL: RWARD74669@AOL.COM––––––––––––––––––––––––––––––––CAT ROLLER CS683E AND CS76XT | WEWANT TO BUY CAT CS683E VIBRATORYROLLER AND CS76XT SMOOTH DRUMROLLER IF YOU HAVE FOR SALE, SENDME PHOTOS AND DETAILSCONTACT: ABDAL SALEEMPHONE: 971-558604929FAX: 96663312326EMAIL:HAJICONSTRUCTEST@GMAIL.COM––––––––––––––––––––––––––––––––GP BUCKET | WE ARE LOOKING TOBUY A GP BUCKET FOR A CATERPIL-LAR 950F II WHEEL LOADER , WITHBALDER SON COUPLER OR PIN ONCONTACT: JULIOPHONE: 631-273-1893FAX: 631-273-2418EMAIL:IRONHORSEEQUIP@MAS.COM––––––––––––––––––––––––––––––––16-20 FT DUAL AXLE TRAILER | 16-20FTTRAILER TO TOW A SMALL BACKHOE.ATTACHABLE TO FORD F-250 HITCH.CONTACT: PAT HASSLERPHONE: 856-562-8178EMAIL: HASSLERIND@AOL.COM––––––––––––––––––––––––––––––––
SMALL VANS OR PICK UPS AND CARSCONTACT: CHARLIEEMAIL: CHARSCHEM@HOTMAIL.COM––––––––––––––––––––––––––––––––150 FORD VAN WITH WHEELCHAIR LIFT CONTACT: DONPHONE: 780 8807400EMAIL: DONTHIBO@HOTMAIL.COM––––––––––––––––––––––––––––––––WHEEL LOADER 966C EGINE 3306CONTACT: FAYEMAIL: ABEBIGANIYU@YAHOO.COM––––––––––––––––––––––––––––––––10FT MOTORCYCLE TRAILER(USED) |TO HAUL MOTORCYCLECONTACT: RONALD LOVEPHONE: 407-963-2059EMAIL: KNBSDAD@YAHOO.COM––––––––––––––––––––––––––––––––EZ POUR 50 GAL MELTERCONTACT: STACIAPHONE: 860 887 8449EMAIL: JSGALLIVAN@COMCAST.NET––––––––––––––––––––––––––––––––JOHN DEERE 855 USED FRONT ENDLOADER BACK HOE | USED JOHNDEERE MODEL 855/WITH FRT ENDLOADER//AND BACKHOECONTACT: CHARLESPHONE: 910 564 4931EMAIL: EDINA@INTRSTAR.NET––––––––––––––––––––––––––––––––EX 601 OR HYUNDAI 553-7 EXCAVATORCONTACT: JUCYPHONE: +6798764308FAX: 8812354EMAIL:SHAZEELKHAN54@YAHOO.COM––––––––––––––––––––––––––––––––OTR TIRES | WE ARE LOOKING FORMICHELIN, BRIDGESTONE, GOODYEAR,YOKOHAMA OTR TIRES. NEW-DEMOUNTED-USED. ONLY WHOLE-SALE/AUCTION PRICES. THANKSCONTACT: MARKEMAIL: AAMARK.SALE@GMAIL.COM––––––––––––––––––––––––––––––––I NEED A CAT EL300 OR EL300B WITH ACAT ENGINE.CONTACT: MACHINERY SUPPLY INC.PHONE: 8134783802FAX: 8134127079EMAIL:MATT@MACHINERYSUPPLY.COM––––––––––––––––––––––––––––––––PATH PAVER | PATH PAVER LEEBOY5000 WILL CONSIDER OTHER MAKES.IN GOOD CONDITION. IN AREAAROUND FLA.CONTACT: MIKEEMAIL: JHVILLENEUVE@GMAIL.COM––––––––––––––––––––––––––––––––J D 670D GRADER CAB | IM CHASING A670/770D GRADER CAB COMPLETECONTACT: PETER MURRAYPHONE: +61407283980EMAIL: THYMUS8@BIGPOND.COM––––––––––––––––––––––––––––––––MOBILE OFFICE WITH WASHROOM | 12 X 36 ? C/W WASHROOM SELF CONTAINEDCONTACT: JERRY DOELLPHONE: 403-382-7908EMAIL: JCDOELL@TELUSPLANET.NET––––––––––––––––––––––––––––––––
MOTOR GRADER | LOOKING GRADER,AND EXCAVATORSCONTACT: MANSOORPHONE: +971508486871EMAIL: MANSURGHORI@GMAIL.COM––––––––––––––––––––––––––––––––BACKHOE | I AM LOOKING TO BUYCASE BACKHOE 2WD 580SK, 580L,580SL, 580M AND 580SM, SERIES I ANDII IF YOU HAVE ANY FOR SALE, PLEASESEND PHOTOS, SERIAL NUMBER ANDLOCATION. LOOKING FORWARD TOYOUR OFFERS.CONTACT: RIZ SUNESARAPHONE: 832-528-0786FAX: 281-727-0415EMAIL:RIZ@MEGAEQUIPMENTS.COM––––––––––––––––––––––––––––––––KOMATSU 308 TRACK EXCAVATOR |LATER MODEL YEAR, UP TO 4000HOURS, NORTHEAST LOCATIONCONTACT: RICHARDPHONE: 603 828-6100EMAIL: CMISOLD1@COMCAST.NET––––––––––––––––––––––––––––––––480 BACKHOE | 480 USED BACKHOE,BETWEEN 8 AND 18 THOUSAND,CONTACT: GARY HICKSPHONE: 606-348-8647FAX: 606-348-4517EMAIL:H.870@WINDSTREAM.NET––––––––––––––––––––––––––––––––SWEEPS 850J JOHN DEERE DOZERCONTACT: ANDYPHONE: 812-890-5631EMAIL: CARNOLD358@GMAIL.COM––––––––––––––––––––––––––––––––36" CLEAN OUT BUCKET NO TEETHFOR LB75 NEW HOLLAND BACK HOECONTACT: BILL RAWLINGSPHONE: 317 745 6185FAX: WERAWLINGS@GMAIL.COMEMAIL:WERAWLINGS@GMAIL.COM––––––––––––––––––––––––––––––––DIESEL GENERATORS WITH/WITHOUTTRAILER.CONTACT: FELIX SANCHEZPHONE: (787) 415-9560EMAIL: ITPCOPR@GMAIL.COM––––––––––––––––––––––––––––––––TROMMEL SCREEN (HERCULES ONLY) CONTACT: JIMPHONE: 870-834-1211FAX: 870-793-9305EMAIL:JIMLONGENBACH@USLM.COM––––––––––––––––––––––––––––––––A TRUCK THAT CHANGE FARM TIRESCONTACT: THEORY MAYBINPHONE: 8039249682EMAIL: THEORRY@ICLOUD.COM––––––––––––––––––––––––––––––––TRUCKS | I AM LOOKING FOR A PACK-AGE DEAL ON HIGHWAY TRUCKS(FREIGHTLINER, INTERNATIONAL,VOLVO).YEAR OF MAKE 2009 TO 2011.HIGH MILES PREFERRED, WITH ORWITHOUT SLEEPER. NEED 35 TO 50UNITS. TRUCKS ARE FOR EXPORT,THEY MUST BE PRICED RIGHTCONTACT: SANTIAGOPHONE: 3055064263EMAIL: SSCARZELLA@GMAIL.COM––––––––––––––––––––––––––––––––
Attention Contractors!Post Your Wanted To Buy Listings FREE!
Here’s How! List Your Wanted ItemsIf you would like to place your Wanted To Buy listings on our website for inclusion in our newsletters, simply visit:
www.ConstructionEquipmentGuide.com/wanted and enter your listings. Inappropriate or Sale Ads will be Deleted
CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • May 24, 2014 • Page 87
ALEX LYON & SON AUCTIONEERS
www.lyonauction.com315-633-2944�
• Lima, PeruSat., May 24, 2014For: Late Model & New Rental FleetEquipment and more
• Seattle, WAWed., May 28, 2014For: Late Model Rental Fleet CatEquipment
• Chesapeake, VAThurs., May 29, 2014For: Cranes, Pile Driving Equipment& more
• Manassas, VAFri., May 30, 2014For: Job Completion Auction
• Columbus, OHSat., May 31, 2014For: Job Completion Auction
• Lynchburg, VAWed., June 4, 2014For: Rental Fleet & ConstructionEquipment
• Queretaro, MexicoFri., June 6, 2014For: Late Model ConstructionEquipment
• Las Vegas, NVSat., June 7, 2014For: Rental Fleet Equipment, LargeConstruction & more
• Denver, COMon., June 9, 2014For: Late Model Utility ConstructionEquipment
• Odessa, TXWed., June 11, 2014For: Construction Equipment
• Corpus Christi, TXThurs, June 12, 2014For: Rental Fleet Equipment
• Houston, TXTues, June 17, 2014For: Large Rental Fleet ConstructionEquipment
• Newark, NJSat., June 21, 2014For: Complete Liquidation RentalFleet Equipment
• Boston, MAJune 25-26, 2014For: 2 Day Auction “Building 19”
• Atlantic City, NJSat., June 28, 2014For: Construction Equipment
• Parkersburg, WVFri., July 11, 2014For: Real Estate & Contractors
• Parkersburg, WVSat., July 12, 2014For: Rare Vintage Cars
• Syracuse (Canastota), NYSat., July 19, 2014For: Construction Equipment &more
• Pittsburgh, PAFri., July 25, 2014For: Large Job Completion
RITCHIE BROS. AUCTIONEERS
www.rbauction.com402-421-2631
• Hobbs, NMMay 29, 2014
• Chehalis, WAMay 30, 2014
• North East, MDJune 3, 2014
• Sacramento, CAJune 4, 2014
• Detroit, MIJune 5, 2014
• Las Vegas, NVJune 6, 2014
• Denver, COJune 10, 2014
• Billings, MTJune 12, 2014
• New Braunfels, TXJune 12, 2014
• Nashville, TNJune 12, 2014
• Sidney, MTJune 13, 2014
• Columbus, OHJune 18, 2014
• Houston, TXJune 18-19, 2014
• Manchester, NHJune 19, 2014
• Truro, NSJune 19, 2014
• Raleigh-Durham, NCJune 24, 2014
• Minneapolis, MNJune 25, 2014
• Atlanta, GAJune 26, 2014
• St. Louis, MOJune 27, 2014
• Waycross, GAJune 27, 2014
• Kansas City, MOJuly 11, 2014
1st STRIKE ASSET MANAGEMENT
www.1stStrike.com907-978-4449�
• Fairbanks, AKSat., June 21, 2014For: Alyeska Pipeline AnnualSurplus Auction
BAR NONE AUCTION
www.barnoneauction.com866-372-1700�
• Seattle, WAWed., May 28, 2014For: Commercial Truck & HeavyEquipment
• San Bernardino, CASat., May 31, 2014For: Commercial Truck & HeavyEquipment
• Sacramento, CASat., June 14, 2014For: Commercial Truck & HeavyEquipment
• San Bernardino, CASat., June 21, 2014For: Commercial Truck & HeavyEquipment
• Phoenix, AZSat., June 28, 2014For: Commercial Truck & HeavyEquipment
BIG IRON
www.bigiron.com800-937-3558�
• ONLINE ONLYMay 28, 2014
• ONLINE ONLYJune 4, 2014
• ONLINE ONLYJune 11, 2014
• ONLINE ONLYJune 18, 2014
• ONLINE ONLYJune 25, 2014
• ONLINE ONLYJuly 2, 2014
• ONLINE ONLYJuly 9, 2014
• ONLINE ONLY
July 16, 2014
• ONLINE ONLYJuly 23, 2014
• ONLINE ONLYJuly 30, 2014
CAT AUCTION SERVICESwww.catauctions.com866-750-9432�
• Minot, NDThurs., June 17, 2014For: Construction Equipment
• Winchester, VATues., June 24, 2014For: Construction Equipment
COMMONWEALTH OF PA www.auctionsbygov.com�866-469-7383
• ONLINETues., June 10, 2014For: PennDOT Heavy EquipmentAuction
DAVIS AUCTIONSwww.davisauctionsinc.com�203-758-4087
• Prospect, CTSat., June 14, 2014For: Construction Equipment
• Prospect, CTSat., September 20, 2014For: Construction Equipment
• Prospect, CTSat., December 13, 2014For: Construction Equipment
DEANCO AUCTIONSwww.deancoauction.com601-656-9768
• Philadelphia, MSMay 28-29, 2014For: Construction Equipment andmuch more!
DON SMOCK AUCTION CO., INC.www.dsaauctions.com765-778-9277
• Fairmount, INWed., June 4, 2014For: Construction Equipment
FREY & SONS, INC.www.freyandsons.com�419-455-3739
• Holland (Toledo), OHThurs., May 22, 2014For: Construction Equipment
G.W. McGREW AUCTION COMPANYwww.mcgrewequipment.com�717-428-0922
• Seven Valleys, PATues., June 10, 2014For: Farm & ConstructionEquipment
HENDERSON AUCTIONSwww.hendersonauctions.com225-686-2252
• Livingston, LAJune 12 - 14, 2014For: 3 Day Summer Contractor’sAuction
HILCO INDUSTRIAL, LLC
www.hilcoind.com�877-37-HILCO
• Waterloo, Ontario, CanadaMay 21-22, 2014For: Masonry & ConstructionEquipment
HUNYADY AUCTION COMPANY
www.hunyady.com�800-233-6898
• Valencia, PAThurs., May 29, 2014For: Complete LiquidationConstruction Equipment
• Blairsville, PAThurs., June 26, 2014For: Surplus ConstructionEquipment Liquidation
IRAY AUCTIONS
www.iraymn.com�320-968-7230
• Foley, MNFri., June 6, 2014For: Heavy Construction Equipment,Truck & Trailer
• Foley, MNFri., September 12, 2014For: Heavy Construction Equipment,Truck & Trailer
• Foley, MNFri., December 5, 2014For: Heavy Construction Equipment,Truck & Trailer
IRON PLANET AUCTIONS
www.ironplanet.com�888-433-5426
ONLINE AUCTIONSGo to www.ironplanet.com to viewthe complete auction schedules,inspection reports and to place yourbid!
• ONLINE ONLYMay 29, 2014
• ONLINE ONLYJune 5, 2014
• ONLINE ONLYJune 12, 2014
• ONLINE ONLYJune 19, 2014
• ONLINE ONLYJune 26-27, 2014
• ONLINE ONLYJuly 10, 2014
• ONLINE ONLYJuly 17, 2014
• ONLINE ONLYJuly 24, 2014
• ONLINE ONLYJuly 31, 2014
J.J. KANE AUCTIONEERS
www.jjkane.com�855-GO2-KANE
• Portland, ORThurs., June 12, 2014For: Construction Equipment
• Dallas, TXThurs., June 19, 2014For: Construction Equipment
• West Palm Beach, FLThurs., June 21, 2014For: Construction Equipment
J.M. WOOD AUCTION COMPANY
www.jmwood.com�800-447-7085
• Montgomery, ALJune 4 - 5, 2014For: 41st Annual MunicipalConstruction Auction
• Montgomery, ALJune 27 - 28, 2014For: Annual State of Alabama DOTAuction
MANASSE AUCTIONEERS
www.manasseauctions.com�607-692-4540
• Binghamton, NYSat., May 31, 2014For: Trucks, Equipment, Flat &Dump Trailers & more
• Whitney Point, NYSat., June 14, 2014For: Construction & FarmEquipment
MARTIN & MARTIN
AUCTIONEERS, INC.
www.mmaauction.com�800-763-2728
• Lugoff, SCWed., June 11, 2014For: One Owner Absolute Auction
• Easley, SCTues., June 24, 2014For: One Owner Absolute Auction
• Pelzer, SCWed., June 25, 2014For: Summer Contractor’s Auction
• Monroe, NCTues., July 15, 2014For: One Owner Absolute Auction
MEEKINS AUCTION COMPANY
www.meekinsauction.com�800-499-6560
• Lumberton, NCFri., August 1, 2014For: Late Model Construction andEarthmoving Equipment
NORTH COUNTRY AUCTIONS
www.northcountry-auctions.com603-539-5322
• Colchester, VTSat., May 31, 2014For: Construction/Farm & TractorEquipment and more
PETROWSKY AUCTIONEERS INC.
www.petrowskyauctioneers.com�860-642-4200
• Wharton, NJSat., May 31, 2014For: Major Public EquipmentLiquidation Auction
• North Franklin, CTFri., June 20, 2014For: Classic Car Auction
• North Franklin, CTJune 20-21, 2014For: 2 Day Major Public EquipmentAuction
PURPLE WAVE AUCTION
www.purplewave.com�866-608-9283
• ONLINE ONEThurs., May 29, 2014For: Construction Equipment
• ONLINE ONEThurs., June 12, 2014For: Construction Equipment
• ONLINE ONEThurs., June 26, 2014For: Construction Equipment
RITCHASON AUCTIONEERS INC.
www.ritchason.com�800-806-3395
• Lebanon, TNSat., June 14, 2014For: Heavy Equipment, Trailer,Trucks & Commercial Vehicles
RTI AUCTIONS
www.tietsworth.com�585-243-1563
• Cortland, NYSat., May 31, 2014For: Farm Machinery, ConstructionEquipment, Trucks, Trailers & more
STEFFES GROUP INC.
www.steffesgroup.com�701-237-9173
• ONLINE May 26 - June 4, 2014For: Farm Retirement: Tractors,Loaders, Planters & more
• South Heart, NDFri., May 30, 2014For: Farm Retirement Auction
• ONLINEJune 4 - 11, 2014For: Construction, Trucks, RV’s,Vehicles & more
• Davenport, NDFri., June 6, 2014For: Late Model Farm Equipment
• Sanborn, NDThurs., June 19, 2014For: Excavating & Trucking
• Sabin, MNWed., June 25, 2014For: Farm Retirement
• ONLINEJuly 2 - 9, 2014For: Construction, Trucks, RV’s,Vehicles & more
• West Fargo, NDWed., July 30, 2014For: Tractor, Loaders, Combines andmuch more!
• Litchfield, MNThurs., August 14, 2014For: Construction/Farm Equipment
WAYNE PIKE AUCTION COMPANY
www.waynepikeauction.com763-389-5700
• Princeton, MNSat., June 14, 2014For: Heavy Equipment
• Princeton, MNSat., September 13, 2014For: Heavy Equipment
• Princeton, MNSat., December 6, 2014For: Heavy Equipment
YODER & FREY
AUCTIONEERS, INC.
www.yoderandfrey.com419-865-3990
• Darlington, PASat., May 31, 2014For: Construction & FarmEquipment, Trucks & Trailers
• Danville, VAThurs., June 19, 2014For: Construction Equipment, Trucks& Trailers
• Beloit, OHSat., June 21, 2014For: One Owner CompleteLiquidation Absolute Auction
AuctionsComingTo view information on upcoming auctions visit our
Auction Calendar at www.constructionequipmentguide.com
Page 88 • May 24, 2014 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
To view our Business Calendar online, go to www.constructionequipmentguide.com.
EFFICIENCY PRODUCTION, INC. MUNICIPAL SAFETY DAY, MAY29thEfficiency Production, Inc. to host Municipal Safety Day, May29, 2014 for state DPW personnel.
In conjunction with the Michigan Rural Water Association(MRWA), Michigan CAT, Cherne Industries, Miss Dig and JackDoheny Company; Efficiency Production, Inc. is set to host its8th Annual Municipal Safety Day on May 29, 2014 from 8 AMto 4 PM at Efficiency Production’s corporate headquarters inMason, Michigan. As in the past, participants at MunicipalSafety Day will qualify for MDEQ Continuing Education Credits.The agenda for Municipal Safety Day includes:. Confined Space Training, presented by Jack Doheny Company. New Utility Location Requirements & Training, presented byMiss Dig. Excavation Safety Training, presented by Efficiency Production . Backhoe Operator Training, presented by Michigan CAT. Hydro-Excavation Demonstration, presented by Jack DohenyCompany. Test Ball/Pipe Plug Safety, presented by Cherne Industries. FREE LUNCH and raffle!THERE IS NO COST TO ATTEND MUNICIPAL SAFETY DAY.“Municipal Safety Day is designed specifically for Michigan’spublic works personnel,” says Ken Forsberg, President ofEfficiency Production, Inc. “It provides a cross-section of equip-ment, regulation, and best-practice safety procedures and oper-ation.” To register for Municipal Safety Day; please call (989) 539-4111 at least two days before this event.Efficiency Production, Inc. is the nation’s leading manufacturerof trench shielding and shoring equipment such as “trenchboxes” and vertical hydraulic shores. Efficiency’s state-of-the-art manufacturing facility and corporate headquarters are locat-ed at 685 Hull Road, Mason, Michigan, 10 miles south ofLansing. Take the Kipp Road exit off U.S. – 127 and proceedEast .25 miles to Hull Road. The service drive (Trillium Road)to Efficiency Production is .75 miles South of Kipp Road, justbefore Kent Feeds.
Construction Association of Michigan (CAM) and HomeBuilding Industry Association Partner to Present Mid-YearEconomic Forecast and State of the Industry Luncheon onTUESDAY, JUNE 10, 2014. The luncheon meeting will begin with a tradeshow and opportu-nity for guests to meet the speakers from 10:30 AM to NOON,
including networking and tabletop displays. This will be fol-lowed by a full lunch and the program from Noon to 2:00 PM.Registration fees for the event are $40/person. For registrationinformation, call CAM at 248/972-1000 or HBA at 248/862-1002, or register online at www.cam-online.com. For generalinformation, contact CAM – Amanda Tackett at 248/972-1109;contact HBA – Susan Adler Shanteau at 248/862-1016.
AGC Quarterly Membership Meeting (Members Only)!!!When: Tuesday, June 17, 2014 from 11:30 AM until 1:30 PMWhere: Kitch Gammi Club, 831 E. Superior Street, Duluth, MNwww.kitchigammiclub.com 218/724-8589Contact: Denise Woods, dwoods@agcmn.orgPhone: 651/796-2186 11:30 AM to 12:00 PM Social Time12 NOON to 1:30 PM – Lunch and ProgramCost: $25 per person (Refund deadline – June 10)
Snow & Ice Management Association presents…17th Annual Snow & Ice SymposiumJune 18 thru 21, 2014Columbus, OHThe 2014 Symposium will include over 20 educational ses-sions (including two keynotes), a 100+ exhibit Trade ShowFloor, three snack & chat roundtable discussions, an off-siteBrine Making Workshop, receptions, networking, and more. Location: Greater Columbus Convention Center Host Hotel:Hyatt Regency Columbus, OHFor more information, visit www.sima.org/show or call (414)375-1940; email: info@sima.org.
NCI Building Systems hosts metal buildings assembly seminarfor building design and development contractors and profes-sionals – June 25 – 27, 2014NCI Building Systems will host a three-day conference in theHouston, TX area to educate metal construction contractors andprofessionals on metal building assembly. Students will learngeneral guidelines, common industry practices and pitfalls toavoid when erecting metal buildings. The first day of the semi-nar is Wednesday, June 25, and concludes on Friday, June 27.The seminar will be held at the NCI Training Center (7313Fairview Street, Houston, TX 77041) with start time each dayof 8 AM. The training involves a three-day class with the firsttwo days featuring classroom presentations on various topicsincluding general framing, building brace, roof accessories,customer service and more. The remainder of the time will cen-ter around hands-on installation of the panels on several mock-ups. Pre-registration is required. To register for this event, callDee at 281/847-7606. For more information, please visit theseminar information page.
PA GAS EXPO 2014JULY 30th, KOVALCHICK CONVENTION and ATHLETIC COMPLEXWe’ll see you this year for PA GAS EXPO 2014 on July 30,2014 from 9 AM until 3 PM
Thank you again for attending PA Gas Expo 2013. The Expoincluded seminars, demonstrations and an opportunity toengage in business-to-business networking. The PA Gas Expo2014 will be held at the Kovalchick Complex, 711 Pratt Drive,Indiana, PA 15705. For more information on this event, youmay call 724/471-1053.
Historical Construction Equipment Association 2014ConventionAugust 7th to 9th, 2014, in conjunction with the New YorkSteam Engine Association’s Pageant of Steam inCanandaigua, New York. Canandaigua is approximately 30 miles southeast of Rochester,70 miles west of Syracuse, and 90 miles east of Buffalo. Ourlast show in Canandaigua, in 2001, featured a wonderfulassortment of equipment, and we look forward to more of thesame this time.Working to preserve the history of the construction equipmentthat shaped our world…The Historical Construction Equipment Association is a non-profit organization dedicated to preserving for public educationthe history of the construction, dredging and surface miningequipment industries.
HCEA International Convention and Old Equipment ExpositionThe HCEA holds one annual convention and old equipmentexposition each year. Somewhere in either the lower 48 orCanada, we bring members, local fans, exhibitors, merchandiseretailers and, of course, a lot of working machines together forlearn and share a bit of history. For more information on this event, please contact theAssociation at 419/352-5616 or go to info@hcea.net.
Ohio Nursery & Landscape Association presents…NGLCOFIELD DAY, August 12, 2014, Perry, OHThe NGLCO Summer Field Day is a long-standing tradition forgreen industry professionals. Mark your calendar and attendthe 2014 event! The Nursery Growers of Lake County Ohio, Inc. was formed in1927 for ‘the improvement and trade education’ within theworld-famous region of Northeastern Ohio center of LakeCounty, Ohio. Our Association continues to help nursery andsupplier members address current issues and speak with onevoice, here in the “Heart of the Nursery Industry.” Contact theNGLCO with any questions you may have at 440/241-7969 orgo to info@nglco.com for more information.
SAVE THE DATE!American Public Works Association2014 International Public Works Congress and ExpositionAUGUST 17 – 20, 2014Metro Toronto Convention CentreToronto, Ontario APWA’s International Public Works Congress & Expositionattracts more than 5,000 attendees each year and excitementcontinues to grow as we gear up for Toronto in 2014. This is
one event you can’t afford to miss! Prime locations are filling upfast so don’t wait, call me directly at 703/706-8230 or email atrbates@ntpshow.com to reserve your booth today. For moregeneral information on the above show, please contact APWAShow Management at 800/687-7469 or 703/706-8230;email: apwasales@ntpshow.com. Website: www.apwa.net.
COAL-GENAugust 20 to 22, 2014, Music City Center, Hall B, Nashville,Tennessee With over a decade of service to the coal sector, COAL-GEN isthe industry’s most dynamic event covering the latest topicsaffecting the design, development, upgrading, operation andmaintenance of coal-fueled power plants. With an anticipatedattendance of nearly 2,000 industry professionals, COAL-GEN isthe industry’s largest event focused on the solutions of todayand the technologies of tomorrow. The Benefits of AttendingCOAL-GEN 2014 include: Gain a better understanding of cur-rent and future issues affecting the coal industry. Be a part ofthe discussions affecting the design, development, upgrading,operation and maintenance of coal-fired power plants. Learnabout technical developments and how they impact your work;and network with thousands of industry professionals. EarnProfessional Development Hours in our Pre-ConferenceWorkshops. For COAL-GEN event information, contact JenniferLindsey at 918/832-9313 or email: jenniferl@pennwell.com.
The Ohio State University Farm Science Review EventSeptember 16 thru September 18, 2014The 52nd annual Ohio State University Farm Science Review willbe held Sept. 16-18 at the Molly Caren Agricultural Center, andpreparations are well underway for the annual farming show-case, which attracts more than 130,000 farmers, growers, pro-ducers and agricultural enthusiasts from across the U.S. andCanada annually. Participants are able to peruse 4,000 productlines from more than 600 commercial exhibitors and engage ineducational opportunities with Ohio State and Purdue Universityspecialists, Ohio State Extension, and the Ohio AgriculturalResearch and Development Center. More than 600 commercialexhibitors set up shop at the Review each year, displaying thelatest and greatest in farming technology, products, machineryand equipment. For exhibitors, it’s a chance to reconnect withestablished customers and connect with new ones. “If youcome to the 2014 Farm Science Review, you will ‘Experience theDifference.’” The Media coordinators for the Farm ScienceReview are:Janice Welsheimer, Wilt Public Relations937/688-3878; Janice@wiltpr.com; www.wiltpr.comTracy Turner, CFAES Communications and Technology614/688-1067; turner.490@osu.edu; http://cfaes.osu.edu
BusinessCalendar
CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • May 24, 2014 • Page 89
California Auction Company Bond #70259785. Preliminary list to date. Equipment subject to change. © 1999-2014 IronPlanet, Inc. All Rights Reserved. IronPlanet®, IronClad Assurance® and Auctions you can trust® are registered service marks of IronPlanet, Inc. All other marks and brands are the property of their respective owners.
www.ironplanet.com
ONLINE AUCTIONTHURSDAY, MAY 29Buy with confidence knowing the equipment has been inspected and we guarantee the report is an accurate description of the machine’s condition. That’s what our IronClad Assurance® stands for.
2012 CAT 305D CR
(1 of 5) 2013 CAT 924K
2006 John Deere 450J LGP
2011 CAT 930HIT
2012 CAT D6K LGP
2005 F650 Service Truck
2010 CAT 307D
(1 of 9) 2012 CAT 252B3
2000 Gradall XL4100
2007 Int’l 2400 Gallon Water Truck
2012 CAT D5K LGP
(1 of 5) CAT D8R
NLO
NEINL
NE A
CUA
IONTC
ION
NLOHURST
NEINLHURS
NE AAAYDHURS
CUA,YY,AY M
IONTC 2AYM
ION9 2
Buy with confidence knodescription of the machine’
wing the equipment has been inspected and wBuy with confidence knos condition. That’description of the machine’
wing the equipment has been inspected and ws what our IronClad Ass condition. That’
e guarwing the equipment has been inspected and wancesurs what our IronClad As ®
t is an accurantee the repore guar® .tands for s
atet is an accur
(1 of 5) 2013 C
T 924KAAT 924K(1 of 5) 2013 C 2012 C
GPT D6K LAAT D6K L2012 C
T 252B3AAT 252B3(1 of 9) 2012 C
T 252B3 T D5K LAAT D5K L2012 C
GPT D5K L
T AAT 305D CR2012 C
T 305D CR 2011 C
T 930HITAAT 930HIT2011 C
T 307DAAT 307D2010 C
2007 Int’l 2400 Gallon W
ruckater T2007 Int’l 2400 Gallon W
2006 John Deere 450J L
GP2006 John Deere 450J L 2005 F650 Ser
ruckvice T2005 F650 Ser
adall XL41002000 Gr
adall XL4100 A(1 of 5) C
T D8RAAT D8R
y Bnapmon Coitcua AinrofilaCy otrepore phe trs adnard bna
but snempiuq. Eetao dt tsiy lranimiler. P58795207d #noy B.srenwe ovitcepser riehf ty o
s Rthgil Rl. Acn, ItenalPnor4 I102-999. © 1egnaho ct tcej
ntpmeiuq engiruteaF
tenalPnor. Idevrese ® ecnarussd AalCnor, I ® s ynoitcud An a
:mor fnt
tsurn tau cos y ® enalPnorf Is okrae mcivred seretsigee rr a
ri.www
skrar mehtl ol. Acn, Ite
omc.tenaplonr
Page 90 • May 24, 2014 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
Phone: (315) 633-2944 • Fax: (315) 633-8010
Syracuse, NY (Evenings) (315) 637-8912
www.lyonauction.com
Sales Managers & Auctioneers, Inc.
ALEX
LYON& SON
SATURDAY, MAY 31 @ 9:30 AM
NOTE: Selling in this sale will be very late model John Deere and CatConstruction Equipment, Forklifts, Aerials, plus late model walkingfloor trailers, Mack quad axle dump trucks, dump trailers and more.
HILITES: 19 HYDRAULIC EXCAVATORS: 2012 Cat 336EL,2011 Cat 336DL, (2) 2011 Cat 320DL, 2010 Cat 304CCR, 2013Komatsu PC490LC (1000hrs.), Komatsu PC220LC, (2) Unused JD245GLC, (2) 2012 JD 210GLC, 2007 JD 270DLC, 2008 JD 160DLC,2008 JD 200DLC, JD 590D, 2011 Hitachi ZX240LC-III, (2) Hitachi ZX50, 2008 Bobcat 435, ARTICU-LATED HAUL TRUCK: 2006 JD 250D, 3 MOTOR GRADERS: 2010 JD 772G, JD 772B, JD 570A,5 RUBBER TIRED LOADERS: 2006 JD 624J, JD 624E, 2006 JD 544J, 2010 JD 444K, Cat 950F, (2)2013 Cat 924K, 5 CRAWLER TRACTORS; JD 750JLT, 2006 JD 700JLT, JD 450JLT, 2006 JD 450J,JD 450HLT, 10 TRACTOR LOADER BACKHOES: 2013 NH B95C (4x4), (2) 2012 JD 310K (loader,4x4), 2010-2009-2008 JD 310 Super J (4x4), 2007 JD 310J, 2006 JD 310 Super G, JD 310G, JD 410G(4x4), JD 110 (4x4), ASPHALT ROLLERS: 2007 Hamm HD12, 3 VIBRATORY ROLLERS: 2006Cat CP563E, Cat CP433E, Bomag BW213D, TRENCH ROLLER: 2010 Dynapac LP8504, 25 SKIDSTEERS: (6) 2011-2006 NH L215, NH LS180, 2012 JD 333D (track), 2011 JD 326D, (2) 2011 JD 319D(track), (2) 2008 JD 317D, 2007 JD 317, JD 270, JD 250, Case 90XT, Bobcat S220, 2011 Bobcat S150,Bobcat 843, 2009 Cat 252B-2, 2010 Cat 246C, 2009 Cat 246C, 2009 Cat 236B-2, 5 TELESCOPICFORKLIFTS: (2) 2007-(3) 2006 MEC TH80 (8,000lb.), 2 BOOM LIFTS: Genie S65 (4x4), Genie S80(4x4), 7 AGRICULTURAL TRACTORS: (2) JD 4650 (4x4), Allis Chalmers 200, WATER PUMP:2007 Pioneer PP66S12L, DIGGER DERRICK TRUCK: 1992 Ford F700 (s/a), VACUUM TRUCK:2005 Mack CV713, BUCKET TRUCK: 1997 GMC C8500, ROLLBACK TRUCK: 1994 FordLTL9000 (t/a), 8 DUMP TRUCKS: (3) 2003-1998 Mack RD (quad.), 1999 Mack CL (quad.), 2005 FordF450 Crew Cab Landscape (s/a), 2005-2004 Ford F450 (s/a), 2004 Ford F350 4x4 s/a, BUS: 1997Thomas 88 passenger, 20 WALKING FLOOR TRAILERS: (20) 2008-2004 MAC & East (t/a), TAGA-LONG TRAILER: 2000 Evaco D02 (t/a), 6 DUMP TRAILERS: 2004-(2) 2003 Trail Star 39ft. (t/a),2003-1998 Trail Star 34ft. (t/a), 2000 East 34ft. (t/a), SUPPORT EQUIPMENT: New Reading ATBV9696in. Aluminum Diamond Plate Tool Box,New Reading ATBS89 89in. Aluminum Diamond Plate ToolBox, New Reading ATBV88 88in. Aluminum Diamond Plate Tool Box,New Reading ATBS49 49in.Aluminum Diamond Plate Tool Boxes
DIRECTIONS: From the North/South: take I-71 to Rte. 36 & US 37 Exit, proceed West on Rtes. 36 &37 for 9 miles to Delaware. Turn right on Rte. 23 North for 1.2 miles to the sale site. Entrance on left atthe Travelodge. From the East/West: Take I-70 to I-270 bypass, proceed North on I-270 to I-71 to Exit
for Rtes. 36 & US 37 and proceed as noted above. NOTE: Auction Entrance is off of Rt. 23.Address: 935 U.S. 23 North Delaware, OH 43015.
OHIO LICENSE #: 63199360809, OHIO AUCTIONEER LICENSE #: 62199360989SITE PHONE: (262) 903-6269, (863) 602-8365
JOB COMPLETION AUCTION
COLUMBUS, OHIO(DELAWARE COUNTY FAIRGROUNDS)
(20) WALKING FLOOR TRAILERS, (10) DUMP TRAILERS, (6)
MACK DUMP TRUCKS (QUAD.), TRUCK TRACTOR, PLUS
FULL LINE OF CONSTRUCTION EQUIPMENT (CAT, JOHN
DEERE), HYDRAULIC EXCAVATORS, RUBBER TIRED
LOADERS, SKID
STEERS, ROLLERS,
ATTACHMENTS &
SUPPORT EQUIPMENT.AUCTION
ABSOLUTE AUCTION
HAISLEY EXCAVATING, LLC1017 W. 800 South • Fairmount, IN 46928
WEDNESDAY, JUNE 4, 2014 • 9:30 A.M.
Sale Site Phone: 317-379-2829 - Ask For MarkTerms: Complete Payment on Sale Day – Payment May Be Made By Cash or Check. *ALL CHECKS MUST HAVE CURRENT BANK LETTER GUARANTEEING FUNDS*BUYERS PREMIUM: 2% on each item $2501 & Greater 10% on each item $2500 & Less
Auctioneers: Nic Smock - Lic. #AU10500037
DON SMOCK AUCTION CO.,
INC.
6531 S. State Road 13, Pendleton, IN 46064rstinger@dsaauctions.com • www.dsaauctions.com
EQUIPMENT: Deere 120C Excavator, C/H/A, Plumbed, Deere 35DMini, C/H/A, Coupler, Plumbed, 218 Hours, Cat 307 SSR Mini,Offset Boom, 3,027 Hrs, Case 650K LGP Series 2 Crawler Tractor,Ripper, 2,123 Hrs, Deere 326D Skid Loader, C/H/A, 2 Speed,Vermeer V8550 Trencher, 449 Hours, Case 584 Forklift, Dresser520B Loader, 4 in 1 Bucket, Dynapac CA15 Vib. Smooth DrumCompactor, 48" Double Drum Sheepsfoot, ‘50's John Deere 12'Disc, TRUCKS: ’97 Volvo Tandem Axle Dump, MII Plus Cummins280 HP Diesel, Allison Automatic, ‘87 International S1900 Dump,DT466 Diesel, 5+2 Speed, New Tires, 185K Miles, ‘95 FordAeromax L9000 Tandem Dump, Cat 3406, 350HP, 9 Speed, ‘03Sterling Acterra Single Axle Utility Truck, Mercedes Diesel,Allison Automatic, TRAILERS: ‘98 ASM 20 Ton Tag, DualTandem, Trail Mobile Tow Dolly, Sweetwater MP Tilting TileTrailer, EXC. ATTACHMENTS: UB & Kent Excavator Hammers,24”, 30” & 60" Bucket Fits a 120 Size, 24" Bucket Fits a 160 Size,12” & 36" Deere Bucket Fits a Deere 35D, Auger Basket, 12”, 16”,36” Buckets Fits a Cat 307, BACKHOE ATTACHMENTS: Case 58036" Bucket, Hyd. Hammer, SKID LOADER ATTACHMENTS: 66"Bucket, Bobcat B850 Hammer, 72" Cat Rock Bucket, 72" CIDDouble Hyd. Cylinder Grapple Rack Bucket, 72 " Bradco PowerRake, M&B 84" Hyd. Broom, 72" BOCE Bucket, McMillan Augerw/ 8”-30" Bits, 3PT ATTACHMENTS: (2) Land Pride 72" GraderBox, Agritech Grader Box, Land Pride 72" PS1572 Solid StandSeeder , 60" Roto Tiller, 84" Woods Spring Tooth Rake, LandPride 72” & 84" Soil Pulverizers, TR3 Arena Rake, 3 Pt WeightBox, 3 Stage Hyd. Forklift, Better Built Liquid Manure Spreader,VARIOUS: New Kubota D950 3 Cylinder 22 E Horse DieselEngine, 4 Cylinder Perkins Diesel, Cummins 4B Diesel 3.9 Liter
Engine, Cummins 5.9 Liter 6BTA Diesel with Allison 545 Au Camefrom a Truck that had 40K Miles, 2 Ton Overhead Crane, 30' ofRail w/ uprights, Brush Burner 102 HP Air Cooled Diesel, StumpGrinder, Gas, IR 100 Air Compressor, Stone Concrete Mixer,Honda Gas, (2) Stihl TS500i Cutoff Saws , 34" Trowel Honda Gas,6" PTO Driven Trash Pump Pull Type, Laser Alignment 5000Laser Beacon, Tripods & Grade Sticks, (2) Plate Compactors,New Black Max 7000 Honda Generator, Earthquake Pro Roto-Tiller, Tailgate Straw Blower, 3000# Wrecking Ball, MISCELLA-NEOUS: 80 Gallon A/C, Hyd. Power Packs, Various Size & TypeHyd. Cylinders, Hyd. Auto Crane for Utility Truck, Several ShopAir Compressors, 22.5 Bud Alum. Wheels, (4) 17.5X25 Tires,1/2" to 1"Air Drive Impacts, Several Hammer Drills & Bits, AngleDrills, Milwaukee Porta Band Saw, Hyd. Crimper, Approx. 500Stackable Filling Cabinets, Miter box Saw, Multiquip 3" TrashPumps, Delta Table Saw, Lincoln AC225-5 Arc Welder, Jacks &Stands, 5HP Roto Tiller, Hose Reels & Hose, Come-A-Longs &Chain Falls, Electric Overhead Hoist, Various Length & SizeChains, Lifting Chains, Ratchet Binders, Various Size SuctionHoses, Torch Sets, Fire Extinguishers, Porter Cable Grinder,Gorman Rupp 3" Dewatering Pumps, Salamander Heaters, Alum.Portable Fuel Tanks, Lincoln Battery Grease Guns, Pintle & ReeseHitch Receivers, 90# Jack Hammers, New Stanley Hyd.Hammers, Forklift Forks, 16' Retractable Electric Tarp, (4)8.5X22.5 Alum. Bud wheels, DeWalt 3750 Pressure Washer,Landau Hotshot HS-3000 Power Washer, Alum. & FiberglassLadders, Scaffolding Various Heights, Shovels, Rakes, Brooms,Picks, Tool Boxes, Too Many Wrenches, Shop Tools to List, NeedShop Tools. Don’t miss this auction!!
Can’t Make it to the Auction? BID LIVE ONLINE!Register for this auction on proxibid.com
Flooding Pushes CompletionDate Back Over Two Yearsbolted into place on Jan. 12, 2012. Workcontinued throughout the winter as weatherpermitted.On average, the number of employees on
the project ranged from 20 to 50 each day,Qualls said. Crews worked Monday throughSaturday, around the clock for severalmonths while constructing the center pierportion of the bridge.Work alternated on the bridge; for exam-
ple, while the bridge deck was pouredbetween Piers 1 and 4, crews beganinstalling beams between Piers 4 and 6. Onthe Missouri side, construction progressedon Piers 8 through 16 as the bridge deck waspoured between Piers 10 and 16. Crews theninstalled beams between Piers 8 and 10 andcontinued to work on Pier 7, which is theKansas/Missouri state line pier. The approximate bottom elevation of the
Pier 7 drilled shaft is 663 ft. (202 m), and theapproximate deepest depth of the structureunder the river bottom is 86.5 ft. (26.4 m) or120.5 ft. (36.7 m) under the river surface,Qualls said.
Several barges were required on the proj-ect, along with a 400-ton (363 t) ring/bargecrane, several 100- to 400-ton (363 t) landcranes, concrete paving equipment, asphaltequipment and grading equipment, Quallssaid.The new bridge deck required about
20,140 cu. yd. (15,398 cu m) of concrete,with the largest concrete placement on theproject of about 2,952 cu. yd. (2,257 cu m)of concrete for the new bridge, which took23 continuous hours to place, Qualls said.The new bridge’s arch height is 165 ft. (50
m) above the river, which required about2,555 tons (2,317 t) of structural steel andabout 1,796 tons (1,629 t) of reinforcingsteel.Also needed were 67,000 lineal ft.
(20,421 m) of temporary strand cable and7,000 lineal ft. (2,134 m) of hanger cable,1,100 gal. (4,164 L) of paint to paint the newbridge, and 70,000 field bolts and about350,000 shop bolts.
(This story also can be found onConstruction Equipment Guide’s Web site atwww.constructionequipmentguide.com.) CEG
EARHART from page 68
CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • May 24, 2014 • Page 91
Page 92 • May 24, 2014 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
rbauction.com | 1.800.211.3983
Featured upcoming auctionsDenver, CO June 10 New Braunfels, TX June 12 Billings, MT June 12 Sidney, MT June 13 Houston, TX June 18–19 Columbus, OH June 18 Minneapolis, MN June 25 St. Louis, MO June 27 Kansas City, MO July 11
Bid with confidence▸ No minimum bids or reserve prices▸ Up to 100% financing available▸ Inspect and bid in person or online
Sell your equipmentCall today–any number of items accepted.
More items added dailyVisit rbauction.com to see all auctions and up-to-date listings.
Featured items in North America770+ excavators380+ crawler tractors380+ wheel loaders195+ motor graders315+ loader backhoes350+ skid steer loaders145+ articulated dump trucks105+ motor scrapers470+ dump trucks and much more...
Unreserved public auctions
34,9 items
Auctioneer Patrick J. Hicks # 13818, Auction Firm # 2008000166, Auctioneer Frederick R. Vilsmeier # 2004000137, Auctioneer Trevor J. Moravec # 16450, Motor Vehicle Dealer License #DLR25867, Auctioneer John L. Korrey # 7012011, Auction Firm License # 444.000193, Auctioneer Greg M. Highsmith # 441.000865
2 –8
VHP4 M04 19
TERPILLARCAATERPILLAR8001– 18JUNE –TX,ONTHOUS
OFBRA
1NEW
E2
13 6TERPILLARCAATERPILLAR – 2OFF 2 1JUNE –TXX –,UNFELSBRA
C 350 LD 350EJ REEDNHOJ2 – 2006
C3377 9 9TERPILLAR2
CAATERPILLAR6002 1JUNE –TXX –,UNFELSBRANEW
770OL
02C
4 4SJJ0 31 3DEEREJJOHN x44 18JUNE –OH,UMBUSOL
oming pcued rred uateFOCCOervDen
HBEIL 3 – 2006 FO1
sauctionoming 10ne Ju
N5 TO100-5.2 120 10
MTLLTRREH 10x8x10 1JUNE –OC,DENVER
91– 18JUNE –TX,ONTHOUS
Norin semited rred uateFFe770+ rstoaavcex
UNUS –2 1OF3
Bid ▸
aicAmerth Nor
8 38 3T4 PETERBILLT412
0 2 –EDUNUS 1JUNE –T M,BILLINGS
eonfidenccith wBid price vserveror sidbm minimuNo
2006 KOLC
sepric
-77C300L300C 18
PUTSAATSMO06 K OJUNE –OH,UMBUSOL
OCCO, ervDenTXs, elnfauBrNew
TMs, linglBiTM, Sidneyy,
TXon, tsHouOHs, ubmluoCCo
MNs, liapoMinneMOs, ouiL. St
MO, ityy, CsasanK
10ne Ju12ne Ju12ne Ju31ne Ju918–1ne Ju
18ne Ju25ne Ju27ne Ju11lyJu
770+ rstoaavcex380+ soractrtwler arc380+ saderlowheel195+ sadergror mot315+ shoekacbader lo350+ saderloeer tsid ks145+ ructmp dued atluticar105+ saperrscor mot470+ mucand skructmp du
▸ ▸ ▸
SelC
MorVisiand
skruc
e...morh muc
price vserveror sidbm minimuNo ablaivaing ancfin100% o tUp
onor son perin id band pectIns
equipmentr ouyyoulSelemsitofber mnuyan–yaodtlal
lyaidadded semite More t Visi omauction.crb auctionslalsee o t
s.tingslie ato-dp-tuand
sepricle
lineon
ed.eptcacems
auctions
om auction.crb
Firm Auction 13818, # skHicJ. kricatPAuctioneer Auctioneer #DLR25867, ense Licaler Dele ehicVor Mot
441.000865# mith HighsM. eg GrAuctioneer
om | 11.39831.800.2
2004000137, # meier sliVR. kedericrFAuctioneer 2008000166, # Firm 444.000193,# ense LicFirm Auction 7012011, # eyorrKL. hn JoAuctioneer
11.3983
16450,# ecvaMorJ. or evrTAuctioneer 2004000137, 444.000193,
CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • May 24, 2014 • Page 93
Motor Vehicle Broker Dealer #DD01182 / Vendor's License #U-ME-1035901*No payments for 90 days is a limited time offer from Ritchie Bros. Financial Services. Financing is subject to credit approval and qualified equipment or assets. Minimum contract term of 24 months and qualifying assets valued at $10,000USD or higher. Offer is available for deals booked and funded by June 30, 2014, and for items purchased by US, Canadian or Australian businesses or sole proprietors at Ritchie Bros. auctions occurring from April 1, 2014 to June 30, 2014 only. First payment will be reflective of date of invoice and at the sole discretion of Ritchie Bros. Financial Services. Additional terms and conditions apply. Contact Ritchie Bros. Financial Services for more information.
Unreserved public auction
Detroit, MI June 5 (Thursday) | 9 am
Bid with confidence▸ No minimum bids▸ Items available to inspect▸ Bid in person or online
Sell your equipmentCall today.
More items added dailyVisit rbauction.com for full listings.
Location46700 Grand River Ave., Novi, MI 48374
Featured itemsLoader backhoesCranesTruck tractorsTransfer sets Dump trucks Trailers & much more
6 – RED RIVER LB838 38 FT
1 OF 2 – BENSON
4 – KENWORTH T800 LIVE BOTTOM
1 OF 2 – BRODERSON IC802D 8.5 TON
4 – KENWORTH W900
4 – PETERBILT 357 w/RELIANCE
rbauction.com | 248.380.3800
GROVE RT740 40 TON LINK-BELT HSP8040 40 TON
KRUPP KMK5110 110 TON
Page 94 • May 24, 2014 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
Alex Lyon & Son Holds Construction, Recycling, Truck Sale
On the hunt for bargains, Norm Baur (L) catches upwith Bob Pedone of C&G Salvage.
John (L) and Joe Salvatore of DRSEnterprises were pleased to havepurchased a welder at the auction.
Bill (L) and Richard Pownall of AmberTrucking & Excavating consider a bidon this John Deere excavator.
Jack Lyon calls out the bids from his “Jack in the Box” truck.
Tom Lower of Lower Trucking inEvans City, Pa., tries out a Bobcatskid steer loader.
Larry Mahnen (C) of National First Equipment LLC joined his son, MattMahnen (far R) of Ohio CAT, along with Matt’s son, Clay and daughter,Maddie, to take in the auction activities.
Mark Smith (L) and Chuck Slaby ofLaPine Truck & Equipment Salesstopped by to look at the trailers thatwere on the block.
Alex Lyon & Son held a large con-struction, recycling and truck auc-tion on May 10 in Cleveland, Ohio.
Much of the equipment up for bid wasrental equipment made available fromSunbelt Rentals as a part of its process inupdating its fleet. Equipment up for bidincluded tractor loader backhoes, skidsteers, screening plants, stacking conveyorand agricultural tractors and tracks alongwith various other machines and equip-ment.
(This story also can be found on
Construction Equipment Guide’s Web site at
www.constructionequipmentguide.com.) CEG
CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • May 24, 2014 • Page 95
ththththththh
Register Onsite or Online www.iraymn.comThe “Biggest & Best” Heavy Equipment,
Truck & Trailer Auction in MN!
FFridaridayy, , JJune 6une 6
Units Arriving DailyUnits Arriving Daily
thth 8:00am 8:00am
Book Your Own Auction!CALL: 877-968-7230 Email: iray@iraymn.com
Col. Raymond S. Henry - MN Lic.#05-14-011; WI Lic.#2490-52Real Estate Auctioneer & GPPA Certified Equipment Appraiser
S
56-Excavators, Dozers, Wheel Loaders, Conveyors, Packers, Compactor, Rollers
100+Semis, Dump Trucks, Vehicles,
Busses, Forestry and Variety Attachments
@Jct. Hwy 95 & 25 Foley, MN
See website for full list.Plows, VDump Boxes, Snow railers, Mowers, Trucks, TT
See website for full list.ehiclesPlows, V
Dump Boxes, Snow railers, Mowers,
ractors, rucks, T
Equipment Inspections:781 Hull Rd, Mason, MI & 2261 E. Remus Rd, Mt. Pleasant, MIEquipment Located at:
Equipment Inspections:781 Hull Rd, Mason, MI & 2261 E. Remus Rd, Mt. Pleasant, MIEquipment Located at:781 Hull Rd, Mason, MI & 2261 E. Remus Rd, Mt. Pleasant, MI
Page 96 • May 24, 2014 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
Case Construction Equipment has enteredinto a strategic partnership with LeicaGeosystems to provide machine control tech-nologies — both factory installed and aftermar-ket — throughout its line of construction equip-ment. The agreement also includes a commit-ment to shared product development, and is partof a global alliance between Leica Geosystemsand CNH Industrial. The agreement enables the full integration of
Leica Geosystems solutions and other machinecontrol opportunities from the factory on Caseequipment, and customers receive greateraccess and support to these technologiesthrough the Case dealer network. Case equip-ment will retain the ability to work with allmajor machine control providers through facto-ry options.“It was important for us to help make
machine control technology more accessibleand practical for the end user, and this agree-ment will make it easier for contractors todeploy it through their Case dealer,” said JimHasler, vice president, Case ConstructionEquipment, NAFTA. “Thanks to this partner-ship with Leica Geosystems, we can look at ourequipment from step one and determine the best
ways to integrate machine control and othertechnologies into each machine. By doing thisearly in the development process, and workingdirectly with the Leica Geosystems engineeringteam, we’ll be able to provide grading andearthmoving contractors with entirely new lev-els of productivity and efficiency.” “We are delighted to have been selected by
Case Construction Equipment for this opportu-nity,” said Ken Mooyman, president, LeicaGeosystems, NAFTA. “Our partnershipenables Case to provide Leica Geosystemssolutions direct from the factory and gives theircustomers broad access to 1, 2 and 3D MachineControl systems and support through the Casedealer network. Together we have a greatopportunity to dramatically improve the work-ing lives of construction equipment userseverywhere. Additionally it allows both partiesgreater early involvement in the developmentprocess facilitating equipment integration withmachine control technologies.” For more information, visit Leica-
Geosystems.us or Casece.com.(This story also can be found on Construction
Equipment Guide’s Web site at www.construc-
tionequipmentguide.com.)
Case, Leica Geosystems Enter Into Strategic Partnership
Case Construction Equipment has entered into a strategic partnership withLeica Geosystems to provide machine control technologies — both factoryinstalled and aftermarket — throughout its line of construction equipment.
ARTBA Suggests Public Signs for Structurally Deficient Spansconstruction work by the states over the past10 years. “It would set back bridge improve-ments in every state for the next decade.”“The bridge problem sits squarely on the
backs of our elected officials,” Black said.“The state transportation departments can’tjust wave a magic wand and make the prob-lem go away. It takes committed investmentby our legislators. Members of Congressneed to come to grips with that. Some of ourmost heavily travelled bridges were built inthe 1930s. Most are more than 40 years old.”Bridge decks and support structures are
regularly inspected by the state transporta-tion departments for deterioration and arerated on a scale of zero to nine — nine being“excellent” condition. A bridge is classifiedas structurally deficient and in need of repairif its overall rating is four or below.While these bridges may not be immi-
nently unsafe, ARTBA suggests they be signposted so the public knows they have struc-tural deficiencies that need repair.The ARTBA analysis of the bridge data
supplied by the states to the USDOT found:• The 250 most heavily crossed structural-
ly deficient bridges are on urban interstatehighways, particularly in California. Withone exception, all are at least 39 years old.• Pennsylvania (5,218), Iowa (5,043),
Oklahoma (4,227), Missouri (3,357) andCalifornia (2,769) have the highest numberof structurally deficient bridges; Nevada(36), Delaware (56), Utah (117), Alaska(133) and Hawaii (144), the least.• At least 20 percent of the bridges in four
states — Pennsylvania (23 percent), RhodeIsland (22 percent), Iowa (21 percent) andSouth Dakota (21 percent) — fall in thestructurally deficient category.State specific bridge information from the
analysis — including rankings and locationlists of the 250 most heavily travelled struc-turally deficient bridges in the nation and 10most heavily travelled in each state — isavailable in the “Economics” section ofwww.artba.org.��For more information, visit
www.artba.org.(This story also can be found on
Construction Equipment Guide’s Web site at
www.constructionequipmentguide.com.)
BRIDGES from page 1
Agreement Calls for States’Contracts of Road By Early ’15the bridge at the state line. The agreementcalls for the two states to have contracts fordesign, construction and operation andmaintenance of the road by early 2015, andto use their “best efforts” to have the roadcompleted by the end of 2018.Illinois Transportation Secretary Ann
Schneider issued a statement saying the dealwill help the economies of both states.“This agreement solidifies that partner-
ship and our commitment to the success ofthis project,” she said. “Moving forwardwith our regional and local partners, we arenot just building a road, but creating jobs,promoting economic development andimproving mobility throughout the region.”Critics argue that the road won’t have
much of an effect on economic developmentand that it will harm the environment.Andrew Armstrong, a staff attorney of theEnvironmental Law & Policy Center thathas filed two lawsuits trying to stop the high-way, said the agreement highlights the finan-cial risks to both states.“This is a time of really uncertain funding
levels at the state and federal level for trans-portation and there’ no need to build thisproject using very precious taxpayers fundswhen it’s going to be used by so few vehiclesin comparison to the existing roads that needmaintenance and upkeep,” he said.INDOT spokesman Will Wingfield said
the plan calls for private investors to pay thecosts the states don’t pay and then to receiveannual payments through the toll collections.Officials have said it could take up to 18years for the tolls to start generating a profit.The agreement said Illinois will take 39years to pay its share of the costs, while itwill take Indiana 35 years to pay off its share.The agreement estimates the cost of the
highway to be nearly $1.51 billion and saidthat figure could be changed after the envi-ronmental impact study is completed.Officials with the two states had earlierplaced the estimated cost at $1.3 billion.The states are still awaiting federal
approval of the project.(This story also can be found on
Construction Equipment Guide’s Web site at
www.constructionequipmentguide.com.)
ILLIANA from page 1
CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • May 24, 2014 • Page 97
CAT AUCTION SERVICES860 Blue Gentian Road, Suite 100 Eagan, MN 55121
866.984.8782 info@catauctions.com
Follow the new leader.® www.catauctions.com
UPCOMING AUCTIONS
MINOT, ND Tuesday, June 17 9 AM Central TimeHosted by: Butler Cat
©2014 Caterpillar. All Rights Reserved. CAT, CATERPILLAR, their respective logos and “Caterpillar Yellow,” as well as corporate and product identity used herein, are trademarks of Caterpillar and may not be used without permission.
Adding Auction Locations & Equipment Daily See our website: www.catauctions.com
WINCHESTER, VATuesday, June 24 9 AM Eastern Time Hosted by: Alban Cat351 Zachary Ann Lane | Winchester, VA 22624Auctioneer Joel W. Marreel VA License #: 2907004160 Auction Business VA License #: 2900872
Auction Clerk License #: 659
Bring in this Ad for a FREE GIFT when you register at one of our upcoming auctions! SOURCE: CEG MW Issue 11
FREE GIFT
2011 PETERBILT 3372005 CAT D8T 2002 CAT 980G IIBELLY DUMP TRAILERS (2 OF 16)
UP
PCOMIN
ING AUCT
TIONS
TERP , CA T T. All Rights Reserved. CA T©2014 Caterpillar
cug AnidAd
,” as well as corporate and product identity used herein, are trademarks of Caterpillar and may not be used without permission.ellowTERPILLAR, their respective logos and “Caterpillar Y
s & Enotiacon Lotic
,” as well as corporate and product identity used herein, are trademarks of Caterpillar and may not be used without permission.
t Dnempiuqs & E
,” as well as corporate and product identity used herein, are trademarks of Caterpillar and may not be used without permission.
yliat D
Follow the new leader
cug AnidAdrru oeeS
Follow the new leader.catauctions.comwww
s & Enotiacon Loticww w:etisbe w
.Follow the new leader ®
.catauctions.com
t Dnempiuqs & Ecoms.onitucatac.ww.
860 Blue Gentian Road, Suite 100
866.984.8782
yliat Dcom
T AU CAAT AUCTION SERVICES860 Blue Gentian Road, Suite 100 E
866.984.8782 info@catauctions.com
T AUCTION SERVICES Eagan, MN 55121
info@catauctions.com
Page 98 • May 24, 2014 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
ADVERTISER INDEX
The Advertisers Index is printed as a free editorial service to our advertisers and readership. Construction Equipment Guide is not responsible for errors or omissions.
ALEX LYON & SON INCCOLUMBUS OH ........................................................................90
ALEX PARIS CONTRACTING CO INC ................................................9ALLU GROUP ....................................................................................57AMERICAN STATE EQUIPMENT ........................................................7ANACONDA USA ................................................................................51ARING EQUIPMENT CO INC ............................................................19ARROW TRAILER & EQUIPMENT ....................................................43ARTIC SNOW & ICE CONTROL ........................................................56ASC CONSTRUCTION EQUIP USA ........................................10,11,27BANDIT INDUSTRIES INC ................................................................75BARGAINS ....................................................................................83,84BID SPOTTER ....................................................................................95BOBCAT ENTERPRISES....................................................................22CAT AUCTION SERVICES
MINOT ND ..................................................................................97CATERPILLAR ..............................................................................72,73CEG SCALE MODELS........................................................................31CK POWER ........................................................................................23CLASSIFIEDS ....................................................................................85CONSTRUCTION EQUIPMENT GUIDE
AIR COMP PROMO ..................................................................42MOBILE APP PROMO................................................................50WANTED ....................................................................................86AUCTION TRIPLE BUY..............................................................91VALUE ADDED ..........................................................................82
DON SMOCK AUCTION COFAIRMONT IN ............................................................................90
DOOSAN INFRACORE AMERICA CORP ....................................48,49DOOSAN PORTABLE POWER ..........................................................65DOPPSTADT ......................................................................................72DYNAPAC............................................................................................66ERB EQUIPMENT ..............................................................................15FABCO EQUIPMENT INC ....................................................................2FARM-RITE EQUIPMENT INC............................................................16FELLING TRAILERS ......................................................................44,45FINKBINER EQUIPMENT CO ..............................................................7FLANGE LOCK ..................................................................................29FLUID CONTROL SERVICES ............................................................22FURY MOTORS ..................................................................................41GARY CARLSON EQUIPMENT..........................................................26GRINDERCRUSHERSCREEN.COM..................................................78GROVE WORLDWIDE........................................................................99HOWELL TRACTOR & EQUIPMENT CO ........................................100HYDRAULICIRCUIT TECHNOLOGY..................................................56ILLINOIS TRUCK & EQUIPMENT ........................................................3INDEXATOR INC ................................................................................55IRAY AUCTION
FOLEY MN ................................................................................95IROCK CRUSHERS ............................................................................74IRON PLANET ....................................................................................89JEFF BELZERS CHEVROLET ......................................................39,43
JOHN DEERE ....................................................................................47KAWASAKI CONSTRUCTION MACHINERY......................................61KLEEMAN............................................................................................77KOMATSU AMERICA CORP..........................................................62,63KPI-JCI ................................................................................................79KUBOTA ..............................................................................................46LEADING EDGE ATTACHMENTS INC ..............................................57LIUGONG CONSTRUCTION MACHINERY ......................................13M ADAMS EQUIPMENT CO ..............................................................17MAGNUM ATTACHMENTS ................................................................85MCCANN INDUSTRIES INC ................................................................6METSO MINERAL CRUSHING ..........................................................71METSO MINERAL SCREENING ........................................................81MID COUNTRY MACHINERY ............................................................21MURPHY TRACTOR ..........................................................................85MUSTANG MFG..................................................................................67NORAM ..........................................................................................58,59NORTRAX-MIDWEST ....................................................................23,29NTS TIRE SUPPLY ............................................................................22OHIO CAT............................................................................................33PEMBERTON INC ..............................................................................57POWERSCREEN MW DEALER ........................................................80PURPLE WAVE INC............................................................................88RANSOME EQUIPMENT SALES LLC................................................86RDO EQUIPMENT/SCHARBER EQUIPMENT ..................................24REDI-HAUL TRAILERS INC................................................................40RITCHASON AUCTIONEERS
LEBANON TN 06/14/14..............................................................95RITCHIE BROS. AUCTIONEERS
DETROIT MI ..............................................................................93RITCHIE BROS. AUCTIONEERS ......................................................92ROAD BUILDERS MACHINERY......................................................6,25ROGERS BROTHERS CORP ............................................................38ROLAND MACHINERY INC..................................................................5SCREEN MACHINE INDUSTRIES ....................................................74SENNEBOGEN ..................................................................................76SHERIDAN REALTY & AUCTION CO ................................................95SMITHCO ............................................................................................40STAR EQUIPMENT LTD ......................................................................6SUPERIOR INDUSTRIES ..................................................................78TEREX CRANES ................................................................................60TITAN RENTS ....................................................................................33TOWMASTER INC ............................................................................37ZIPS TRUCK EQUIPMENT ................................................................43
OHIO STATE SUPPLEMENTCOLUMBUS EQUIPMENT CO ............................................................8EQUIPMENT CORP OF AMERICA ......................................................5JCB OF OHIO........................................................................................5MURPHY TRACTOR & EQUIPMENT CO ............................................7RUDD EQUIPMENT..............................................................................3THE MCLEAN CO..............................................................................4,6
To read articles about these CEG advertisers, visit www.constructionequipmentguide.com
CONSTRUCTION�EQUIPMENT�GUIDE�•�www.constructionequipmentguide.com�• May�24,�2014�•�Page�99
12920 Gravois RoadSt Louis, MO 63127
314/729-0125
12321 E. Pine StreetTulsa, OK 74116918/438-1700
6715 W. RenoOklahoma City, OK 73127
405/495-7820
Kansas City, KS913/850-6300877/851-5729
Cleveland Crane & Shovel Sales, Inc.26781 Cannon RoadCleveland, OH 44146
440/439-4749800/362-8494
Fax:�440/439-2177
aforepaugh@craneandshovel.net
www.craneandshovel.net
930 W 138th StreetRiverdale, IL 60827
708/656-7700Fax: 708/532-127325210 Brest RoadTaylor, MI 48180734/947-9250
Fax: 734/947-9260
920 S State Road 39Lebanon, IN 46052
765/482-4145Fax: 765/482-49282126 Glenview DriveEvansville, IN 47720
812/422-6912Fax: 812/422-6982
Aspen EquipmentCompany
www.aspenequipment.com1525 S.E. Cortina Dr.Ankeny, IA 50021515/965-1000
Fax: 515-965-179011475 S. 153rd St.Omaha, NE 68138402/894-9300
Fax: 402-894-9302
Kirby Smith Machinery Inc. Walter Payton Power Equipment LLC
The GMK6300L all-terrain craneAt Grove, we provide high-performance features, reliable 24/7 support and a quality product lineup – because cranes are all we do. With 17 all-terrain models ranging from 40-450 USt, we’ve got a crane to handle any jobsite.
Featured is the GMK6300L – its 350 USt capacity, 263 ft. boom, Allison transmission and MEGATRAK™ suspension system are ideal for a wide range of applications and will keep you working.
For more information, visit www.manitowoccranes.com
Tilt cab
MEGATRAK™
Removable outrigger box
LEADERS IN LIFTING
Page 100 • May 24, 2014 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE