Post on 15-Oct-2020
The Original
MADE IN GERM
ANY
LED Lighting Product Information V 16.1
Tel. 01372 888455 (w) www.flairlight.co.uk
2
4 - 55 - 6
7
89
1011
12
131516171819
22 - 232425262829
32 - 3435 - 39
40
4041
42
44454647484950
52
53545556575859
60
66676869
70 - 7172 - 73 74 - 75
7677 - 78
7980 - 81
82838485 86
87 - 8992 - 93
94
959697
98 - 104
106
Legend Products by article number
Design and Object Lighting
Object-light 230 V, 3 W side-Light 230 V, 3 WSigma 230 V, 30 W Slimstyle 230 V, 25/30/40W
Garden Lights, Object Lights and Recessed Spots
Clar 230 V, 50/100 WClarios II 24 V, 15 WClarios fl ex beam 24 V, 10/15 WClarios-mini 12 V, 3 WLight belt 12 V, 3/5 WLED wallwasher lineo, 24 VBrilliance 24 V, 10 W + brilliance 24 V, 10 W ds -NEW Brilliance-maxi 24 V, 20 W - NEWBrilliance-midi 12 V, 3 WBrilliance-midi narrow 12 V, 3 W - NEW Brilliance-mini 12 V, 1 W Dome-spot 12 V, 3 WAccessories for garden and object lights Connection Examples
Pool and pond spots
Aquaros 20, 24 V, 20 W Aquaros 5, 12 V, 5 W
Accent Light Points
dot-spot, 8 mm, 12 V, 0,25 Wmini-disc, 14 mm, 12 V, 0,25 Wquad-dot, 10 x 10 mm, 12 V, 0,25 Wdisc-dot + quad-dot 45, 20 mm, 12 V, 0,25 Wfrog-dot, 14 mm, 0,25/0,5 Wstarlight-crystal, 12 V, 0,25/0,5 Wstarlight fi ber-optic, 230 V AC, 3 W
Complete Set
RGB set of 1 or 3 ► 230 V, 12 V, 5 WLED spotlight set of 1 ► 230 V, 4 WMinispot set of 1 or 3 ► 230 V, 12 V, 3 WLED recessed spot set of 3 ► 230 V, 12 V, 1 WLED recessed spot set of 3 ► 230 V, 12 V, 3 WAccent light points outdoor set of 5 ► 230 V, 12 V, 0,25 W Accent light points indoor set of 5 ► 230 V, 12 V, 0,25 W
LED Linear Lighting
slimlux 3,5slimlux XS 10x15 slimlux 7/7 Kslimlux 19 Fslimlux 19slimlux 19 VA - NEW slimlux 19 Hslimlux 19 Kslimlux 19 180°slimlux eck 45°slimlux 30 x 30slimlux 10 fl ex 6 W/m slimlux 10 fl ex 8 W/m slimlux 10 fl ex 18 W/m slimlux 13,5 fl ex 8 W/m slimlux 17,5 fl ex 18 W/m slimlux 18/30 odLED Handrail Lighting
RIGILUX® LED Linear Lighting
RIGILUX® 19 VIRIGILUX® 19 TIRIGILUX® 30 VI
Power Supply and Accessories
LED displays
Table of contents
3
Leg
end
These terms are our daily incentive to continue designing new LED solutions for you.
Quality – In the case of LED lighting for exterior appli-cations in particular, reliability and durability depend to a great extent on the quality of the components and materials, and on optimum design. dot-spot products are well-known for their long service life even under extreme conditions of deployment.
Fascination – The LED is one of the most energy savings way of creating light. Thanks to its very special properties, the LED opens up totally new design options which the whole dot-spot team translates into customer-oriented solutions with dedication and passion.
Responsibility – dot-spot products mainly add value in the economic sphere in which our customers live.The production and use of quality products is an active contribution to environmental protection and responsible use of resources.
QualityFascination
Responsibility
Made in Germany
Quality - Fascination - Responsibility
Art.-No. Model Watt
object-light
10101.XX.XX.XX ol al silver 3 W 230 V AC
10102.XX.XX.XX ol w white 3 W 230 V AC
Art.-No. transparent opaque CRI Art.-No. Art.-No. Design
XXXX.00.XX.XX warm white, 3000 K 144 lm 124 lm 80 XXXX.XX.00.XX opaque 60° XXXX.XX.XX.00 round
XXXX.01.XX.XX cool white, 6300 K 208 lm 179 lm 65 XXXX.XX.01.XX transparent 60° XXXX.XX.XX.01 square
dot-spot Tel. 01372 888 455 | www.flairlight.co.uk
4
Legend
Leg
end
Area of deployment interior
Area of deployment interior / exterior
Area of deployment underwater
Will bear your weight
Drivable up to 3 tonnes
Operating voltage
Protection class I, protective earth
Protection class II, protective insulation
Protection class III, low voltage protection, SELV
Stainless steel 316 L
Aluminium
THERMOPROTECT protective circuit
Includes CE marking
Product characteristics
Composition of item numbers for products with different features:
1. Product selection (example: object-light, colour warm white)
10102 00 00 01Item number: object-light white ► warm white colour ► foggy lens ► square design
3. Feature 2, opaque lens, 60° 4. Feature 3, square design
With safety/contour plug
With 12 V connector system, IP 44
With M12 connector system
Installation diameter
Installation depth
Dimmable
Housing color
Operating voltage: AC = alternating current, DC = direct current
Design round/square/round with lens
Light color
Lighting current
Lens
Range of application indoor, outdoor, underwater
Color Rendering Index
Radiation angle
Diameter
Cable outlet
Cable with plug conncetor
Plastic-sheathed cable
Twin strand (ts)
Plug M12
Housing plug
Plug IP 44
Plug for linear lighting
2. Feature 1, light colour warm white
+/-
CRI
3 t
V4A316 L
12 VAC/DC
ALU
THERMOPROTECT
Des
ign
and
Obje
ct L
ight
ing
dot-spot5
Made in Germany
International protection class:
First digit, protection against foreign objects and accidental contact:
IP 68
Legend
0 - No Protection1 - Protected against solid foreign objects with diameter greater than 50mm, protected access with back of hand 2 - Protected against solid forgeign object with diameter greater than 12.5, protected agaisnt access with one finger3 - Protected against solid foreign objects with diameter greater than 2.5mm, protected againt access with a tool4 - Protected again solid foreign objects with diameter greater than 1.0mm, protected against access with a wire5 - Protected against dust in harmful quantity, complete protection against contact6 - Dust proof, complete protection against contact
Second digit, protection against water
o - No protection1 - Protected against vertically falling drops of water 2 - Protected against dripping water when the enclosure is tilted up to 15 degrees3 - Protection against water spray falling to 60 degrees from the vertical4 - Protected against splashing water 5 - Protected agaisnt water jets (nozzle) from any angle6 - Protected against powerful water jets7 - Protection against temporary immersion, max. 30 min, up to 1m8 - Protection against continuous immersion, no time limit, up to 1m
Des
ign
and
Obje
ct L
ight
ing
dot-spot6
Products by article number
Art.No. Model Page
10101 object-light Aluminium 8
10102 object-light white 8
11101 side-light Aluminium 9
11102 side-light white 9
15001 Sigma LED Living Space Luminaire natural oak 10
15002 Sigma LED Living Space Luminaire dark oak 10
15010 LED wall washer slimstyle 11
15011 LED wall washer slimstyle RGB 11
15012 LED wall washer slimstyle RGBW 11
20015 clarios II 15
20015 clarios II hc¹ 15
20110 clarios fl ex beam 10 W 16
20110 clarios fl ex beam 10 W 16
20111 clarios flex beam hc³ 10 W 16
20115 clarios fl ex beam 15 W 16
20116 clarios flex beam hc³ 15 W 16
20500 aquaros 20 40
20700 aquaros 5 41
21350 clar 50 W 13
21450 clar 100 W 13
22000 clarios-mini 17
23336 LED wall washer Lineo 336 mm 19
23666 LED wall washer Lineo 666 mm 19
23996 LED wall washer Lineo 996 mm 19
24501 LED wall washer Lineo RGB 501 mm 19
24996 LED wall washer Lineo RGB 996 mm 19
25000 230 V Spot Set 54
25001 RGB Spot 1er Set 53
25003 RGB Spot 3er Set 53
25101 Minispot 1er Set 55
25103 Minispot 3er Set 55
25203 Colorgarden LED recessed spot 1 W 56
25303 Colorgarden LED recessed spot 3 W 57
25405 Colorgarden set of 5 outdoor accent light points 58
25415 Colorgarden set of 5 indoor accent light points 59
26100 light belt clm 18
26110 light belt clm extension 18
26200 light belt cl RGB 18
26210 light belt cl RGB extension 18
30010 brilliance 10 W 22
30015 brilliance 10 W ds 23
30020 brilliance-maxi 20 W 24
30110 brilliance 10 W HC³ 22
30120 brilliance-maxi 20 W HC³ 24
30115 brilliance 10 W HC ds 23
31100 brilliance-midi round design 25
31200 brilliance-midi square design 25
32100 brilliance-mini round design 28
32200 brilliance-mini square design 28
34100 dome recessed spot light 1, 3 W 29
34200 dome recessed spot light 2, 3 W 29
34300 dome recessed spot light 3, 3 W 29
35100 brilliance-midi narrow round design 26
35200 brilliance-midi narrow square design 26
50100 dot-spot 8 mm 44
50400 mini-disc f 45
50410 mini-disc g 45
50500 quad-dot 46
50600 frog-dot 0,25 W 48
50605 frog-dot 0,5 W 48
50700 disc-dot 47
50800 quad-dot 45 47
50905 starlight-crystal 49
51000 starlight fi ber-optic 50
51100 starlight fi ber-optic spark 50
Art.No. Model Page
62070 slimlux 7 68
62071 slimlux 7K 68
62072 End caps sl 7/7k 68
62100 slimlux XS 10x15 67
62101 End caps sl XS 67
62190 slimlux 19 70 - 71
62190A End caps sl 19 70 - 72
62191 slimlux 19 F 69
62191A End caps sl 19 F 69
62192 slimlux 19 H 74 - 75
62192A End caps sl 19 H 74 - 75
62193 slimlux 19 K 76
62193A End caps sl 19 K 76
6219262195
slimlux 19 VA 72
62300 slimlux 30x30 80 - 81
62301 End caps sl 30x30 80 - 81
62450 slimlux eck 45° 79
62451 End caps sl eck 45° 79
63018 slimlux 18 od 87 - 89
63030 slimlux 30 od 87 - 89
63031 Connection sl 18/30 87 - 89
64106 slimlux 10 fl ex 6 W/m 82
64107Connection sl 10 fl ex 6 W/m
82
64108 slimlux 10 fl ex 8 W/m 83
64109 Connection sl 10 fl ex 8 W/m 83
64110 slimlux 10 fl ex 18 W/m 84
64111 Connection sl 10 fl ex 18 W/m 84
64135 slimlux 13,5 fl ex 8 W/m 85
64136 Connection sl 13.5 fl ex 8 W/m 85
64175 slimlux 17,5 fl ex 18 W/m 86
64176 Connection sl 17,5 fl ex 18 W/m 86
65003 slimlux 3,5 66
69194 slimlux 19 180° 75 - 76
69195 Connection & end caps sl 19 180° 75 - 76
70020 slimlux Handrail-Set IP 20 92 - 93
70067 slimlux Handrail-Set IP 67 92 - 93
75191 RIGILUX 19 VI 95
75192 RIGILUX 19 TI 96
75300 RIGILUX 30 VI 97
9XXXX Accessories 32 - 34 / 98 - 104
▪
▪
▪
All catalogue details on power and light current refer to the (complete) luminaire.
Lumen and Kelvin values are typical values and are subject to usual tolerances of ± 5%.
CRI values are minimum values
End caps 19VA
Tel. 01372 888 455 | www.flairlight.co.uk
Des
ign
and
Obj
ect L
ight
ing
dot-spot7
Made in Germany
Design and Object Lighting
Moulded LED, protection class IP 64 Fits in standard pattress boxes Ø 55 mm
Installation depth only 30 mm
Cover plate Anodized aluminum, or with white coating, round or square
LED for direct operation at 230 V
Best quality glass lense, clear or gloss; with 60° reflection angle
Easy to assemble, wide range of applications. This spotlight fits perfectly in standard plaster, cavity and concrete wall boxes with diameter 55 mm.
The side-light is perfect for dazzle free illumination of hallways, paths, steps etc. due to its partly covered lens.
As a down-light, the object-light is perfect for illuminating hallways, porches etc.
The clear lens provides a light beam with sharp edges.
The diffuse lens provides a soft transi-tion between the dark background and the light beam.
As bright as a 20 W halogen, 230 V – no ballast required!
Both lights are optionally available with a clear or diffuser lens:
Direct connection to 230 V - no ballast required.
1
Des
ign
and
Obj
ect L
ight
ing
dot-spot8
object-light 230 V, transparent + opaque
1.000 object-light, student accommodation Oberwiesenfeld in the Olympic Village Munich:
80
mm
60 mm
3 mm 32mm 30 mm
80 mm 80 mm
▪ LED recessed luminaire for direct connection to 230 V power supply and installation in flush mounted and cavity wall sockets; perfect for lighting corridors, canpoies and more
▪
protection class IP 64, also suitable for exterior use; stainless steel fitting screws and seal ring included▪
power requirement only 3 W, as light as 20 W halogen
▪
housing Anodized aluminum, or with white coating, with round or square cover; genuine glass lens transparent or opaque▪
dimmable (e.g. with Eltako universal dimmer EUD61NPN-UC)
▪ operable temperature range - 25°C up to + 45°C
illumination
anodised aluminum and painted white
230 VAC
ALU
Art.-No. Model Watt
object-light
10101.XX.XX.XX ol al silver 3 W 230 V AC
10102.XX.XX.XX ol w white 3 W 230 V AC
Art.-No. transparent opaque CRI Art.-No. Art.-No. Design
XXXX.00.XX.XX warm white, 3000 K 144 lm 124 lm 80 XXXX.XX.00.XX opaque 60° XXXX.XX.XX.00 round
XXXX.01.XX.XX cool white, 6300 K 208 lm 179 lm 65 XXXX.XX.01.XX transparent 60° XXXX.XX.XX.01 square
Tel. 01372 888 455 | www.flairlight.co.uk
Des
ign
and
Obj
ect L
ight
ing
dot-spot9
Side-light 230 V, transparent + opaque
80
mm
60 mm
80 mm
80 mm
3 mm 32mm 30 mm
▪ LED recessed luminaire with glare protection for direct connection to 230 V power supply and installation in flush mountedand cavity wall sockets; perfect for illuminating paths, stairwells, corridors and more
▪ protection class IP 64, also suitable for exterior use; stainless steel fitting screws and seal ring included▪ power requirement only 3 W, as light as 20 W halogen▪ housing Anodized aluminum, or with white coating, with round or square cover; genuine glass lens transparent or opaque▪ dimmable (e.g. with Eltako universal dimmer EUD61NPN-UC)▪ operable temperature range - 25°C up to + 45°C
Made in Germany
illumination
Floor
wall
Art.-No. Model Watt
side-light
11101.XX.XX.XX sl al silver 3 W 230 V AC
11102.XX.XX.XX sl w white 3 W 230 V AC
Art.-No. transparent opaque CRI Art.-No. Art.-No. Design
XXXX.00.XX.XX warm white, 3000 K 51 lm 48 lm 80 XXXX.XX.00.XX opaque 60° XXXX.XX.XX.00 round
XXXX.01.XX.XX cool white, 6300 K 73 lm 69 lm 65 XXXX.XX.01.XX transparent 60° XXXX.XX.XX.01 square
anodised aluminum and painted white
230 VAC
ALU
Sigma LED living space luminaire – Design Markus Bischof
800 - 1350 mm60 mm
40 mm
1240 mm
400mm
Sigma by Markus Bischof
▪ design LED living space luminaire with 30 Watt▪ high quality materials: solid Oak, with aluminum core▪ handcrafted in Germany▪ connection with included power supply in lamp baldachin to 230 V voltage▪ power connection over tie rope▪ hang-up cable from 80 to 135 cm▪ design; Natural Oak, light oiled or Bog Oak, dark oiled▪ dimmable with integrated dimmer▪ long LED service life > 50.000 hrs
dot-spot10
Des
ign
and
Obj
ect
Ligh
ting
Art.-No. Model Color Watt CRI
Sigma natural oak, light oiled
15001 Sigma h natural oak, light oiled 30 W 230 V warm white, 2700 K 2000 lm 85 120° diffuse
Sigma bog oak, dark oiled
15002 Sigma d dark oak, dark oiled 30 W 230 V warm white, 2700 K 2000 lm 85 120° diffuse
230 VAC
230 V IP 20
Tel. 01372 888 455 | www.flairlight.co.uk
dot-spot11
Made in Germany
LED wall washer slimstyle
▪ LED wall washer with extremely stylish and slim design▪ massive aluminum lamp body with metal foot▪ handcrafted in Germany▪ 3 versions:
- warm white, with dimmer- colour RGB, with remote control- colour RGBW, for colour and white light with remote control
▪ connection power warm white 40 W, colour 30 W
Des
ign
and
Obj
ect
Ligh
ting
19
00
mm
18 mm
26 mm
120°
180 mm
18
0 m
m
Art.-No. Model Color Watt CRI
slimstyle
15010 slimstyle ww silver 40 W 230 V warm white, 3000 K 3360 lm 80 120° 3 m
slimstyle RGB
15012 slimstyle RGBW silver 30 W 230 V color RGBW, 3000 K 2800 lm 75 120° 3 m
15011 slimstyle RGB silver 25 W 230 V color RGB 540 lm 120° 3 m
230 VAC
230 V IP 20 ALU
2 Garden, building and recessed spots
Increase your living space with the perfect garden and ob-ject lighting. With the right lighting you benefi t more from your garden or pond. Extend the period of use beyond the day. By doing so you will experience even more new and interesting facets of your home.dot-spot offers a series of different spots for the most vari-ous lighting tasks. Thanks to their plain elegance the spots integrate harmonically into any environment without being obtrusive. The range of sophisticated accessories not only enables you to integrate the garden lighting system in a functional way, but also perfectly considering the aesthetic point of view.
The clar series combines a high light yield and a very el-egant and compact design. Featuring up to 8340 lumens and dispersion angles of 30°, 45° and 60° the clar is ide-al for illuminating big plants and buildings. The models of the clar series are equipped with an active thermal man-agement system and are therefore also applicable under extreme conditions.
Gar
den,
Bui
ldin
g an
d R
eces
sed
Spot
s
dot-spot12
original size
165 mm
138 mm
ø 124 mm
Clar 50/100 high-performance spots
Tel. 01372 888 455 | www.flairlight.co.uk
Gar
den,
Bui
ldin
g an
d R
eces
sed
Spot
s
13
Made in Germany dot-spot
124 mm 138 mm
16
5 m
m
Art.-No. Model Watt
clar 230 V
21350.XX.XX clar 50 50 W 230 V AC 5 m Schuko
21400.XX.XX clar 100 100 W 230 V AC 5 m Schuko
Art.-No. 50 W 100 W CRI Art.-No.
XXXX.00.XX warm white, 2700 K 4790 lm 7520 lm 80 XXXX.XX.30 30°
XXXX.01.XX cool white, 5000 K 5310 lm 8340 lm 70 XXXX.XX.45 45°
XXXX.XX.60 60°
230 VAC
IP 66 ALU THERMOPROTECT30-60
50 mm
Ø 5 mm
Ø 15 mm
5 x 0,34 mm²
▪ High-performance spot for illuminating objects and plants, 50 / 100 W▪ extremely compact design Ø only 124 mm, length 138 mm▪ 50 W version with passive cooling, 100 W with membrane fan, (only 25 db(A))▪ anodized aluminum housing with mounting bracket ▪▪ with THERMOPROTECT system to protect against overheating, operable temperature range - 25°C up to + 45°C▪
dimmable variants available upon request
High Performance Spot 230 V, 50 / 100W
1,5m supply line with M12 plug, power supply 5m cable with shockproof plug, external power supply included in the scope of delivery
dot-spot14
Garden, building and recessed spots
The clarios series, unique in the world:
clarios combines an excellent design and unique technol-ogy. Featuring 15 W of LED power and up to 1570 lm with a diameter of only 60 mm the clarios may be the smallest LED garden spot with the highest output density. Further-more, the clarios is also available as a 10 W variant as well as a mini version with 3 W.
Gar
den,
Bui
ldin
g an
d R
eces
sed
Spot
s
IP 68, 100% sealed housing, applicable also under water
With efficient high-power LEDs, with 10 and 15 W for up to 1570 lm
No risk of burns, maximum housing temperature approx. 60°C
Excellent thermal management with rib design; the THERMOPROTECT electronics additionally protects the LED against overheating
Tempered glass, 4 mm thick
Stainless steel 316L housingLenses for 10 - 40° dispersion angles, clarios fl ex beam with adjustable dispersion angle of 10 - 45°
Robust connection cable, with separate dimmer input, with optional protection against martens
With stable mounting bracket, horizontally and vertically housing, with optional stainless steel ground spike and/or mounting extension
THERMOPROTECT
LEDs are extremely robust and durable, but there is one thing that LEDs can‘t stand up to, and that is high temperatures. dot-spot lights from 3 Watt are thus additionally equipped with the THERMO-PROTECT system. If the critical temperatures occur in the light (e.g. due to direct sunlight, heat venting blocked etc.), the THERMO- PROTECT electronics reduce the power to avoid the LED overheating.
Tel. 01372 888 455 | www.flairlight.co.uk
15
dot-spotMade in Germany
Gar
den,
Bui
ldin
g an
d R
eces
sed
Spot
s
Garden and building spot clarios II 24 V, 15 W
stainless steel
82 mm
65 mm
100 mm
70 mm
▪ probably the most compact LED spot with the greatest performance on the market; 15 W, up to 1570 lm; connects directly to24 V DC, dimmable
▪ for atmospheric lighting of trees, plants and architecture, also usable underwater▪ unique design, silver coloured stainless steel 316L housing; supplied with mounting bracket, dowel and screw▪ 0 - 100% dimmable with PWM dimmer via separate dimming input▪ installation extensions for installation at various heights, stainless steel peg and marten repellent available as custom accessories▪ with 15 W brand-name LED and integrated driver electronics; excellent thermal management with THERMOPROTECT
system which prevents the spot from overheating and thus ensures a long LED service life▪ operable temperature range - 25°C up to + 45°C; different connection variants available
THERMOPROTECT3-40
V4A316 L
Article-No. Model Watt
clarios II
20015.XX.XX.XX clarios II V4A / 316L 24 V DC 15 W
20016.XX.XX.XX clarios II hc 1 V4A / 316L 24 V DC 15 W
Article-No. CRI Article-No. Article-No.
XXXX.00.XX.XX warm white, 2700 K 1502 lm >80 XXXX.XX.13.XX 13° XXXX.XX.XX.33 5 m
XXXX.11.XX.XX neutral white, 4000 K 1502 lm >80 XXXX.XX.20.XX 20° XXXX.XX.XX.41 0,3 m
XXXX.02.XX.XX blue 389 lm - XXXX.XX.30.XX 30° XXXX.XX.XX.42 5 m
XXXX.03.XX.XX green 762 lm -
XXXX.04.XX.XX amber 869 lm -
XXXX.05.XX.XX red 762 lm -
Honeycomb glare protection, -10% light intensity
accessories ► clarios II
Art.-No. Model Description
93000 ES 20 stainless steel peg with M6 screw and lock washer
93001 MS marten repellent, length 50 cm, for mounting to the connection cable
93201 MV 100 installation extension 100 mm
Additional accessories from page ► 32 + 98
50 mm
Ø 5 mm Ø 15 mm
5 x 0,34 mm²
Ø 5 mm
3 x 0,5 mm²
Garden and building spot clarios flex beam 24 V
stainless steel
▪ Powerful LED surface mount spot 10 and 15 W made from stainless steel, with adjustable beam angle of 10 – 45°▪ for atmospheric lighting of plants and architecture, applicable also under water▪ unique design, silver coloured stainless steel 316L housing; delivery with mounting bracket, dowel and screw▪ 0 - 100% dimmable with PWM dimmer via separate dimming input▪ installation extensions for installation at various heights, stainless steel peg and marten repellent available as custom accessories▪ excellent thermal management for a very long LED life▪ operable temperature range - 25°C up to + 45°C▪ different connection variants available
Gar
den,
Bui
ldin
g an
d R
eces
sed
Spot
s
dot-spot16
THERMOPROTECT
V4A316 L
Article-No. Model Watt
clarios fl ex beam
20110.XX.XX clarios fb 10 V4A / 316L 24 V DC 10 W
20111.XX.XX clarios fb 10 hc 3 V4A / 316L 24 V DC 10 W
20115.XX.XX clarios fb 15 V4A / 316L 24 V DC 15 W
20116.XX.XX clarios fb 15 hc 3 V4A / 316L 24 V DC 15 W
Accessories ► clarios fl ex beam
Art.-No. Model Description
93000 ES 20 stainless steel peg with M6 screw and lock washer
93001 MS marten repellent, length 50 cm, for mounting to the connection cable
93201 MV 100 installation extension 100 mm
Article-No. 10 Watt 15 Watt CRI Article-No.
XXXX.00.XX warm white, 2700 K 829 lm 1000 lm >80 XXXX.XX.33 5 m
XXXX.11.XX neutral white, 4000 K 893 lm 1080 lm >80 XXXX.XX.41 0,3 m
XXXX.01.XX cool white, 5000 K 956 lm 1150 lm >80 XXXX.XX.42 5 m
XXXX.99.XX RGB 1 270 lm - -
XXXX.98.XX RGBW, 4000 K 1,2 386 lm - >80
1. Available only in the version clarios fb 10 W, operating voltage 12 V 2. Open only with 5 m connection 3. Honeycomb glare protection, -10% light intensity
clarios fl ex beam, the fi rst garden spot growing with your plantsThe dispersion angle of the clarios fl ex beam can be set to 10 – 45 ° by turning the front panel.This offers unique advantages:
▪ exact setting of the dispersion
angle directly at the object
▪ adjustment of the dispersion angle
for plant growth
Additional accessories from page ► 32 + 98
82 mm
65 mm
100 mm
70 mm
50mm
Ø 5 mm Ø 15 mm
5 x 0,34 mm²
Ø 5 mm
3 x 0,5 mm²
RGB: 5 x 0,25 mm²
RGBW: 6 x 0,25 mm²
Tel. 01372 888 455 | www.flairlight.co.uk
Gar
den,
Bui
ldin
g an
d R
eces
sed
Spot
s
17
Made in Germany dot-spot
Garden and building spot clarios-mini 12 V, 3 W
▪ compact LED spot with 3 W Power LED, connects directly to 12 V DC; excellent luminosity, available with a variety of beam angles
▪ for atmospheric lighting of plants and architecture, also usable underwater▪ unique design, stainless steel 316 L housing; supplied with mounting bracket and special rawl plugs▪ 0 - 100% dimmable with PWM dimmer via separate dimming input▪ installation extensions for installation at various heights, stainless steel peg and marten repellent available as custom accessories▪ with 3 W brand-name LED and integrated driver electronics; excellent thermal management with THERMOPROTECT system
which prevents the spot from overheating and thus ensures a long LED service life > 50,000 hrs▪ operable temperature range - 25°C up to + 45°C▪ different connection variants available
50 mm
30
mm
50 mm
38 mm
65 mm
12 VDC
THERMOPROTECT6-40
V4A316 L
Article-No. Model Watt
clarios-mini
22000.XX.XX.XX clarios mini V4A/316L 12 V DC 3 W
Article-No. CRI Article-No. Article-No.
XXXX.00.XX.XX warm white, 2700 K 207 lm >80 XXXX.XX.06.XX 6° XXXX.XX.XX.33 5 m
XXXX.11.XX.XX neutral white, 4000 K 207 lm >80 XXXX.XX.25.XX 25° XXXX.XX.XX.41 0,3 m
XXXX.01.XX.XX cool white, 5700 K 216 lm >80 XXXX.XX.40.XX 40° XXXX.XX.XX.42 5 m
XXXX.02.XX.XX blue, 470 nm 81 lm -
XXXX.03.XX.XX green, 528 nm 173 lm -
XXXX.04.XX.XX amber, 617 nm 122 lm -
XXXX.05.XX.XX red, 625 nm 145 lm -
XXXX.99.XX.XX RGB 1 86 lm -
Accessories ► clarios-mini
Art.-No. Model Description
93000 ES 20 stainless steel peg with M6 screw and lock washer
93102 BSM stainless steel dazzle protection for clarios-
93001 MS marten repellent, length 50 cm, for mounting to the connection cable
93201 MV 100 installation extension 100 mm
Additional accessories from page ► 32 + 98
1 Optimum RGB colour mixing only with 40° lens
50 mm
Ø 5 mm
Ø 15 mm
5 x 0,34 mm²
Ø 5 mm
3 x 0,5 mm²
RGB 5 x 0,25 mm²
Light belt, Tree belt with LED spots
▪ flexible, weatherproof tree belt made of EPDM material, equipped with 3 LED spots for illuminating treetops, ideal for gastronomy, private gardens and parks
▪ equipped with 3 clarios-mini spots 3 W, or 3 clarios RGB spots 5 W, anodized aluminum housing▪ expandable up to max. 6 spots▪ complete set, with sixfold adapter, extension cable 5 m, remote control for RGB version and power supply▪ The tree belt is flexible and therefore does not hinder tree growth, Length of tree belt 2 m, for trees of up to 60 cm
trunk diameter; cable on the spot 1.5 m
Art.-No. Model Watt
light belt
26100 light belt clm warm white, 2700 K 207 lm 40° 12 V AC/DC 3 x 3 W
26200 light belt cl RGB RGB ca. 120 lm 60° 12 V AC/DC 3 x 5 W
Art.-No. Model Watt
Extension spot 26110 clm tree warm white, 2700 K 207 lm 40° 12 V AC/DC 3 W
26210 cl RGB tree RGB ca. 120 lm 60° 12 V AC/DC 5 W
light belt ▪ wiring diagram
5 m
3 m
2 m
12 V
Gar
den,
Bui
ldin
g an
d R
eces
sed
Spot
s
dot-spot18
light belt clm
light belt cl RGB
40clm 60cl ALU
Tel. 01372 888 455 | www.flairlight.co.uk
336 / 666 / 996 mm39 mm
54 mm
28 mm
Ø 5 mm
2 x 0,5 mm²
RGB: 5 x 0,35 mm²
Gar
den,
Bui
ldin
g an
d R
eces
sed
Spot
s
19
Made in Germany dot-spot
LED Wallwasher lineo, 24 V
▪ High-quality Wallwasher, extremely bright at very small dimensions, with Cree Power LEDs▪ fully encapsulated, for outdoor use▪ anodized aluminum housing, with 5 m connection cable▪ available with different lengths and beam angles, optional with glare protection▪ long service life, > 50,000 h, operable temperature range from - 25°C to + 45°C
IP 67 ALU24 VDC
17-43
Article-No. Model Length Watt
lineo white
23336.XX.XX.XX lineo 336 336 mm 24 V DC 24 W 5 m
23666.XX.XX.XX lineo 666 666 mm 24 V DC 48 W 5 m
23996.XX.XX.XX lineo 996 996 mm 24 V DC 72 W 5 m
lineo RGB
24501.XX.XX.XX lineo 501 RGB 501 mm 24 V DC 27 W 5 m
24996.XX.XX.XX lineo 996 RGB 996 mm 24 V DC 54 W 5 m
Article-No. CRI Article-No. Article-No. Option
XXXX.00.XX.XX warm white, 3000 K 4.500 lm/m 80 XXXX.XX.17.XX 17°XXXX.XX.XX.01
XXXX.01.XX.XX neutral white, 4000 K 5.130 lm/m 80 XXXX.XX.26.XX 26°
XXXX.--.XX.XX RGB 1.500 lm/m - XXXX.XX.37.XX 37°XXXX.XX.XX.00
XXXX.XX.43.XX 43°x16°
Accessories ► lineo
Art.-No. Model Description
93501 MB 1 lineo mounting bracket, distance 15 mm
93502 MB 2 lineo mounting bracket, distance 65 mm
93503 MB 3 lineo mounting bracket, distance 200 mm
Additional accessories from page ► 32 + 98
dazzle protection
Attention: two brackets are required for the lineo 996 model
Aspire Torch tower in Doha, with 3800 RGB special lights
Special luminaire, developed for the Aspire Torch Tower.
Anodized aluminum housing, with PMMA 180-degree light dome, Ø 80 x 120 mm, 9 W RGB, internal driver with THERMOPROTECT system to protect against overheating and overvoltage.
21
Made in Germany dot-spot
Gar
den,
Bui
ldin
g an
d R
eces
sed
Spot
s
Garden, building and recessed spots
brilliance recessed spot with patented ball-based swivelling mechanism The brilliance LED recessed spot is one of the few recessed spots on the markets specially developed for the requirements of LED technology. Therefore, it offers crucial advantages:
▪ best heat dissipation despite swivelling luminaire body▪ extremely compact design with high light yield▪ completely made from 316L stainless steel – no corrosion▪ THERMOPROTECT protective circuit against overheating
of the LED▪ 20 W variant with specially anodised fl oor sleeve ▪ Protection class IP 68, applicable also under water
Optimum heat dissipation towards the spot body by a large contact area of the spherical luminaire housing
Easy swivelling of the luminaire by loosening the compression ring on the back of the spot and turning the luminaire housing
The floor sleeve of the brilliance 20 W additionally serves as a means for large-area heat dissipation towards the surrounding ground. The LED spot is screwed to the mounting sleeve. In order to prevent corrosion, the aluminium floor sleeve is coated with a special anodised layer.
Conventional LED recessed floor spot with approx. 20 W and approx. 2000
brilliance-maxi 20 W, 2150 lm
> 200 mm 100 mm
Reduce to the max!
Thanks to its very small design the brilliance maxi can be used for a variety of applications without being ob-trusive.
25° 25°
dot-spot
Recessed spot brilliance 24 V, 10 W
▪ pivoting recessed LED spot, 10 W; beam angles 10, 20 und 35° available▪ for illuminating plants or architecture or as wall or floor sidelight ▪ installation in floors and walls, even under water▪ 0 - 100% dimmable with PWM dimmer via separate dimming input▪ also available as brilliance 10 W HC, with integrated Honeycomb glare protection▪ body in 316L stainless steel, with tempered glass plate and mounting clamp, mounting sleeve 150 mm x Ø 80 mm included▪ pivoting lamp unit with innovative ball mechanism▪ THERMOPROTECT system, avoids overheating of the spotlight ensuring a very long life of the LED, > 35,000 hrs.▪ operable temperature range - 25°C up to + 45°C▪ different connection variants available
75 mm
80 mm100 mm
65 mm
72 mm
75 mm
25° 25°
brilliance with Honeycomb glare protection
3 t
THERMOPROTECT
24 VDC
10-35V4A
316 L
Art.-No. Model Watt
brilliance
30010.XX.XX.XX brilliance 10 W 10 W 24 V DC
30110.XX.XX.XX brilliance 10 W HC 3 10 W with Honeycomb 24 V DC
Art.-No. CRI Art.-No. Art.-No.
XXXX.00.XX.XX warm white, 2700 K 629 lm >80 XXXX.XX.10.XX 10° XXXX.XX.XX.33 5 m
XXXX.11.XX.XX neutral white, 4000 K 629 lm >80 XXXX.XX.20.XX 20° XXXX.XX.XX.40 Plug/Stecker
XXXX.01.XX.XX cool white, 5000 K 629 lm >80 XXXX.XX.35.XX 35° XXXX.XX.XX.41 0,3 m
XXXX.02.XX.XX blue, 465 nm 278 lm - XXXX.XX.XX.42 5 m
XXXX.03.XX.XX green, 525 nm 614 lm -
XXXX.04.XX.XX amber, 590 nm 521 lm -
XXXX.05.XX.XX red, 625 nm 554 lm -
XXXX.99.XX.XX RGB 1 270 lm -
XXXX.98.XX.XX RGBW, 4000 K 1,2 386 lm -
Installation depth with housing plug + 60 mm
1 Operating voltage 12 V, optimum colour mixing only with 35° lens 2 Open only with 5 m connection
3 Honeycomb glare protection, -10% light intensity
Accessories from page ► 32 + 98
50 mm
Ø 5 mm
Ø 15 mm
5 x 0,34 mm²
Ø 5 mm
3 x 0,5 mm²
RGB: 5 x 0,25 mm²
RGBW: 6 x 0,25 mm²
Gar
den,
Bui
ldin
g an
d R
eces
sed
Spot
s
22
Tel. 01372 888 455 | www.flairlight.co.uk
23
Made in Germany dot-spot
Gar
den,
Bui
ldin
g an
d R
eces
sed
Spot
s
Recessed spot brilliance 24 V, 10 W ds, with theft protection - NEW
▪ pivoting recessed LED spot, 10 W; beam angles 10, 20 und 35° available▪ bolted version, theft protection, screwed to specially anodized aluminum installation sleeve▪ for illuminating plants or architecture or as wall or floor sidelight ▪ installation in floors and walls, even under water▪ 0 - 100% dimmable with PWM dimmer via separate dimming input▪ also available as brilliance 10 W HC, with integrated Honeycomb glare protection▪ body in 316L stainless steel, with tempered glass plate and mounting clamp, mounting sleeve 150 mm x Ø 80 mm included▪ pivoting lamp unit with innovative ball mechanism▪ THERMOPROTECT system, avoids overheating of the spotlight ensuring a very long life of the LED, > 35,000 hrs.▪ operable temperature range - 25°C up to + 45°C▪ different connection variants available
3 t
THERMOPROTECT
24 VDC
10-35V4A
316 L
50 mm
Ø 5 mm Ø 15 mm
5 x 0,34 mm²
Ø 5 mm
3 x 0,5 mm²
RGB: 5 x 0,25 mm²
RGBW: 6 x 0,25 mm²
Art.-No. Model Watt
brilliance
30015.XX.XX.XX brilliance 10 W ds 10 W 24 V DC
30115.XX.XX.XX brilliance 10 W HC 3 ds 10 W with Honeycomb 24 V DC
Art.-No. CRI Art.-No. Art.-No.
XXXX.00.XX.XX warm white, 2700 K 629 lm >80 XXXX.XX.10.XX 10° XXXX.XX.XX.33 5 m
XXXX.11.XX.XX neutral white, 4000 K 629 lm >80 XXXX.XX.20.XX 20° XXXX.XX.XX.40 Plug/Stecker
XXXX.01.XX.XX cool white, 5000 K 629 lm >80 XXXX.XX.35.XX 35° XXXX.XX.XX.41 0,3 m
XXXX.02.XX.XX blue, 465 nm 278 lm - XXXX.XX.XX.42 5 m
XXXX.03.XX.XX green, 525 nm 614 lm -
XXXX.04.XX.XX amber, 590 nm 521 lm -
XXXX.05.XX.XX red, 625 nm 554 lm -
XXXX.99.XX.XX RGB 1 270 lm -
XXXX.98.XX.XX. RGBW, 4000 K 1,2 386 lm -
1 Operating voltage 12 V, optimum colour mixing only with 35° lens 2 Open only with 5 m connection 3 Honeycomb glare protection, -10% light intensity
Accessories from page ► 32 + 98
100 mm
100 mm
12 mm
65 mm
163 mm160 mm
84 mm
25° 25°
dot-spot24
Gar
den,
Bui
ldin
g an
d R
eces
sed
Spot
s
Recessed spot brilliance-maxi 24 V, 20 W - NEW
▪ pivoting recessed LED spot 20 W; beam angles 10, 20 und 35° available▪ for illuminating plants or architecture or as wall or floor sidelight ▪ extremely compact design, with specially anodised aluminium floor sleeve; for floor mounting, only with floor sleeve▪ 0 - 100% dimmable with PWM dimmer via separate dimming input▪ also available as brilliance mx 20 W HC, with integrated Honeycomb glare protection▪ body in 316L stainless steel, with tempered glass plate, screwed into a specially anodised aluminium floor sleeve▪ pivoting lamp unit with innovative ball mechanism, available with pre-set angle▪ THERMOPROTECT system, avoids overheating of the spotlight ensuring a very long life of the LED, > 35,000 hrs.▪ operable temperature range - 25°C up to + 45°C▪ different connection variants available
3 t
THERMOPROTECT
24 VDC
10-35
Ø 5 mm
3 x 0,5 mm²
Art.-No. Model Watt
brilliance-maxi
30020.XX.XX.XX brilliance mx 20 W 20 W 24 V DC
30120.XX.XX.XX brilliance mx 20 W HC 1 20 W with Honeycomb 24 V DC
Art.-No. CRI Art.-No. Art.-No.
XXXX.00.XX.XX warm white, 2700 K 1840 lm >80 XXXX.XX.10.XX 10° XXXX.XX.XX.33 5 m
XXXX.11.XX.XX neutral white, 4000 K 1940 lm >80 XXXX.XX.20.XX 20° XXXX.XX.XX.40 Plug/Stecker
XXXX.01.XX.XX cool white, 5000 K 2150 lm >80 XXXX.XX.35.XX 35°
1 Honeycomb glare protection, -10% light intensity
Accessories from page ► 32 + 98
Residence garden Hilpoltstein with brilliance 10 W
100 mm
100 mm
12 mm
65 mm
163 mm160 mm
84 mm
25° 25°
Tel. 01372 888 455 | www.flairlight.co.uk
25
dot-spotMade in Germany
Gar
den,
Bui
ldin
g an
d R
eces
sed
Spot
s
Recessed spot brilliance-midi 12 V, 3 W
▪ LED recessed spot with 3 W Power LED, connects directly to 12 V DC, with lens, for illuminating plants and architecture oras incidental lighting on walls and floors; installation in floors, walls and ceilings, also underwater
▪ housing stainless steel 316 L, with hardened glass pane and mounting bracket; installation sleeve 83 (150) mm x Ø 44 mm included
▪ available with round or square design▪ 0 - 100% dimmable with PWM dimmer via separate dimming input▪ optionally available with fixed swivel lens inclined by 15°, beam angle 20°▪ with 3 W brand-name LED and integrated driver electronics; excellent thermal management with THERMOPROTECT system
prevents the spot from overheating and thus ensures a long life > 50.000 hrs▪ operable temperature range - 25°C up to + 45°C▪ different connection variants available
50
mm
32m
m
3 8 m m
2 mm
50 mm
42 - 45 mm
60 mm
40
mm
15°
20°
20° swivel lens (permanently set at the factory)
3 t
THERMOPROTECT6-40
12 VDC
V4A316 L
Installation depth with housing plug + 60 mm
50 mm
Ø 5 mm Ø 15 mm
5 x 0,34 mm²
Ø 5 mm
3 x 0,5 mm²
RGB 5 x 0,25 mm²
Art.-No. Model Watt Design
brilliance-midi
31100.XX.XX.XX bmd r V4A/316L 3 W 12 V DC round
31200.XX.XX.XX bmd q V4A/316L 3 W 12 V DC square
Art.-No. CRI Art.-No. Art.-No.
XXXX.00.XX.XX warm white, 2700 K 207 lm >80 XXXX.XX.06.XX 6° XXXX.XX.XX.33 5 m
XXXX.11.XX.XX neutral white, 4000 K 207 lm >80 XXXX.XX.25.XX 25° XXXX.XX.XX.34 10 m
XXXX.01.XX.XX cool white, 5700 K 216 lm >80 XXXX.XX.40.XX 40° XXXX.XX.XX.40 Plug/Stecker
XXXX.02.XX.XX blue, 485 nm 81 lm - XXXX.XX.35.XX 13 x 35° XXXX.XX.XX.41 0,3 m
XXXX.03.XX.XX green, 528 nm 173 lm - XXXX.XX.20.XX 20° XXXX.XX.XX.42 5 m
XXXX.04.XX.XX amber, 617 nm 122 lm - swivel lens (not for RGB)
XXXX.05.XX.XX red, 625 nm 145 lm -
XXXX.99.XX.XX RGB 1 86 lm -
Accessories from page ► 32 + 98
1 Optimum RGB colour mixing only with 40° lens
dot-spot26
Gar
den,
Bui
ldin
g an
d R
eces
sed
Spot
s
Recessed spot brilliance-midi narrow 12 V, 3 W - NEW
▪ LED recessed spot with 3 W Power LED, connects directly to 12 V DC, with lens, especially as incidental lighting on walls andfloors; installation in floors, walls and ceilings, also underwater
▪ version with deep-set LED, for a narrow-beamed and sharp-edged 10-degree light beam and blackened housing for reduced glare▪ aluminum body, anodized in black color, with stainless steel cover plate, with hardened glass pane and mounting bracket;
installation sleeve 83 (150) mm x Ø 44 mm included▪ available with round or square design▪ 0 - 100% dimmable with PWM dimmer via separate dimming input▪ with 3 W brand-name LED and integrated driver electronics; excellent thermal management with THERMOPROTECT system
prevents the spot from overheating and thus ensures a long life > 50.000 hrs▪ operable temperature range - 25°C up to + 45°C▪ different connection variants available
50
mm
32
mm
1 , 38 38mm
2 mm
50 mm
42 - 45 mm
60 mm
40
mm
3 t
THERMOPROTECT10
12 VDC
V4A316 L
Installation depth with housing plug + 60 mm
50 mm
Ø 5 mm Ø 15 mm
5 x 0,34 mm²
Ø 5 mm
3 x 0,5 mm²
RGB 5 x 0,25 mm²
Art.-No. Model Watt Design
brilliance-midi narrow
33100.XX.XX.XX bmd nr r V4A/316L 3 W 12 V DC round
33200.XX.XX.XX bmd nr q V4A/316L 3 W 12 V DC square
Art.-No. CRI Art.-No. Art.-No.
XXXX.00.XX.XX warm white, 2700 K 207 lm >80 XXXX.XX.10.XX 10° XXXX.XX.XX.33 5 m
XXXX.11.XX.XX neutral white, 4000 K 207 lm >80 XXXX.XX.XX.34 10 m
XXXX.01.XX.XX cool white, 5700 K 216 lm >80 XXXX.XX.XX.40 Plug/Stecker
XXXX.02.XX.XX blue, 485 nm 81 lm - XXXX.XX.XX.41 0,3 m
XXXX.03.XX.XX green, 528 nm 173 lm - XXXX.XX.XX.42 5 m
XXXX.04.XX.XX amber, 617 nm 122 lm -
XXXX.05.XX.XX red, 625 nm 145 lm -
Accessories from page ► 32 + 98
IP 67 ALU
Tel. 01372 888 455 | www.flairlight.co.uk
27
dot-spotMade in Germany
Gar
ten-
/ O
bjek
tstr
ahle
r und
Ein
baul
euch
ten ▪ G
arde
n, B
uild
ing
and
Rec
esse
d Sp
ots ▪ L
umin
aire
s po
ur ja
rdin
et o
bjet
s et
spo
ts e
ncas
trés
Historical "Kettensteg" in Nuremberg with brilliance-midi
Gar
den,
Bui
ldin
g an
d R
eces
sed
Spot
s
dot-spot28
Recessed spot brilliance-mini 12 V, 1 W 3
2 m
m
2 mm
50 mm
42 - 45 mm
60 mm
40
mm
38 mm
50
mm
▪ LED recessed spot with 1 W Power LED, connects directly to 12 V DC, diffuse lighting, perfect as a path and marker light for installation in floors, walls and ceilings, and underwater
▪ housing stainless steel 316 L, with hardened glass pane and mounting bracket; installation sleeve 83 (150) mm x Ø 44 mm included
▪ available with round or square design▪ with 1 W brand-name LED and integrated driver electronics for a long life > 50,000 hrs▪ operable temperature range - 25°C up to + 45°C; different connection variants available
3 t
12 VDC
V4A316 L
Constant current or constant voltage system?
All dot-spot LED spots are operated by the constant-volt-age system. Therefore, the spots can be directly oper-ated with 12 or 24 V direct voltage. Multiple spots are connected in parallel as it is known from the 230 V volt-age supply network. Even in the case of longer lines the upstream driver electronics protect the LED from voltage peaks.
In constant-current systems the single LED spots are connected in series. The power supply provides a con-stant current for a specifi c number of LED spots. This series connection is often not so easy to realise in exten-sive installations. Furthermore, in this case the LEDs are more sensitive to voltage peaks, e.g. caused by lightning strikes.
12 V DC24 V DC
230 V / 50 Hz LED
LED driver Constant current system:
LED Constant voltage system:
350 mA,700 mA,1050 mA
230 V / 50 Hz
Constant current driver:
Art.-No. Model Watt Design
brilliance-mini
32100.XX.XX bm r V4A/316L 1 W 12 V DC
32200.XX.XX bm q V4A/316L 1 W 12 V DC
Art.-No. CRI Art.-No.
XXXX.00.XX warm white, 2700 K 88 lm >80 XXXX.XX.33 5 m
XXXX.11.XX neutral white, 4000 K 88 lm >80 XXXX.XX.34 10 m
XXXX.01.XX cool white, 5700 K 92 lm >80 XXXX.XX.40 Plug/Stecker
XXXX.02.XX blue, 485 nm 41 lm - XXXX.XX.41 0,3 m
XXXX.03.XX green, 528 nm 96 lm - XXXX.XX.42 5 m
XXXX.04.XX amber, 617 nm 56 lm -
XXXX.05.XX red, 625 nm 56 lm -
Installation depth with housing plug + 60 mm
Accessories from page ► 32 + 98
50 mm
Ø 5 mm Ø 15 mm
5 x 0,34 mm²
Ø 5 mm
3 x 0,5 mm²
Tel. 01372 888 455 | www.flairlight.co.uk
29
Made in Germany dot-spot
Recessed dome-spot 12 V, 3 W
▪ LED effect lighting with 3W Power LED, connects directly to 12 V DC, as path marker or for effect lighting on walls and ceilings; installation in floors, walls and ceilings
▪ drivable, sand-blasted housing made of stainless steel 316 L; includes mounting bracket and installation sleeve 83 (150) mm x Ø 44 mm
▪ unique design, with 1x, 2x or 3x light beam▪ 0 - 100% dimmable with PWM dimmer via separate dimming input▪ with 3 W brand-name LED and integrated driver electronics for a long life > 50,000 hrs▪ operable temperature range - 25°C up to + 45°C▪ different connection variants available
58
mm
38mm
9 mm
42 - 45 mm
60 mm
38 mm
12 VDC
V4A316 L
Art.-No. Model Watt Design
dome-spot
34100.XX.XX dome 3W 1 V4A/316L 3 W 12 V DC 1 x
34200.XX.XX dome 3W 2 V4A/316L 3 W 12 V DC 2 x
34300.XX.XX dome 3W 3 V4A/316L 3 W 12 V DC 3 x
Art.-No. CRI Art.-No.
XXXX.00.XX warm white, 2700 K 230 lm 1 >80 XXXX.XX.33 5 m
XXXX.11.XX neutral white, 4000 K 230 lm 1 >80 XXXX.XX.34 10 m
XXXX.01.XX cool white, 5700 K 240 lm 1 >80 XXXX.XX.40 Plug/Stecker
XXXX.02.XX blue, 485 nm 90 lm 1 - XXXX.XX.41 0,3 m
XXXX.03.XX green, 528 nm 192 lm 1 - XXXX.XX.42 5 m
XXXX.04.XX amber, 617 nm 136 lm 1 -
XXXX.05.XX red, 625 nm 167 lm 1
XXXX.99.XX RGB 95 lm 1
1 Lumen values of the LED, without DOME cover
Accessories from page ► 32 + 98
50 mm
Ø 5 mm Ø 15 mm
5 x 0,34 mm²
Ø 5 mm
3 x 0,5 mm²
RGB 5 x 0,25 mm²
Installation depth with housing plug + 60 mm
Gar
den,
Bui
ldin
g an
d R
eces
sed
Spot
s
Gar
ten-
/ O
bjek
tstr
ahle
r und
Ein
baul
euch
ten ▪ G
arde
n, B
uild
ing
and
Rec
esse
d Sp
ots ▪ L
umin
aire
s po
ur ja
rdin
et o
bjet
s et
spo
ts e
ncas
trés
dot-spot Tel. +49 (0) 9128 / 72 22 17 - 0 | www.dot-spot.de
30
HeadlineHeadlineHeadline
Gar
den,
Bui
ldin
g an
d R
eces
sed
Spot
s
31
Made in Germany dot-spot
Unique – dot-spot easy RGB
The first professional plug-and-play outdoor RGB solution featuring radio, DMX, KNX or Dali control. Just connect many different spot models via the waterproof plug system in order to obtain a coherent lighting concept.
Choose the desired RGB spots from the product pages. The matching plug-and-play RGB controls and dimmers can be found on the pages 32 – 34.
brilliance 10 W
brilliance-midi / narrow
clarios fl ex beam
clarios-mini
aquaros 5 / 20
dome-spot
RGB Controller / Dimmer
fb funk 1k / RGB
Compatible spots for plug-and-play RGB and dimming system:
dot-spot32
Power supplies plug system 12/24 V, IP 67
▪ High-quality LED power supplies, ready-made, with safety plug on the primary side and M12 plug system on the secon dary side
▪ fully encapsulated version, IP 67
▪ protected against short circuit, overload, overvoltage and overtemperature
▪ Input voltage 90 – 305 V DC, 127-431 V DC
▪ Observe installation instructions on p.39
Power supplies plug system 12 V, IP 67 Art.-No. Model Description Dimensions
90125 nt 12/25 67 M12 Power supply 12 V/25 W, IP67, with prim. contour plug, sec. M12 connector 148 x 40 x 32 mm
90126 nt 12/40 67 P Power supply 12 V/40 W, IP67, with prim. contour plug, sec. power plug 162,5 x 43 x 32 mm
90127 nt 12/60 67 P Power supply 12 V/60 W, IP67, with prim. contour plug, sec. power plug 162,5 x 43 x 32 mm
90128 nt 12/150 67 P Power supply 12 V/132 W, IP67, with prim. shockproof plug, sec. power plug228 x 68 x 38,8 mm
90129 ntV 12/60/6 Power supply 12 V/60 W, IP67, with prim. contour plug, sec. 6-way distributor, 6 x M12 socket 162,5 x 43 x 32 mm 140 x 55 x 40 mm
12 V connection and distribution systemArt.-No. Model Description Dimensions
92700 HV 12/1 12 V main cable mono, power plug to 1 x M12 socket 1,5 m
92701 HV 12/6 12 V 6-way main distributor, power plug to 6 x M12 socket140 x 55 x 40 mm
1,5 m
Power supplies plug system 24 V, IP 67Art.-No. Model Description Dimensions
90317 nt 24/25 67 M12 Power supply 24 V/25 W, IP67, with prim. contour plug, sec. M12 connector 148 x 40 x 32 mm
90318 nt 24/60 67 M12 Power supply 24 V/60 W, IP67, with prim. contour plug, sec. M12 connector 162,5 x 43 x 32 mm
90319 nt 24/90 67 P Power supply 24 V/90 W, IP67, with prim. contour plug, sec. power plug 161 x 61 x 36 mm
90320 nt 24/150 67 P Power supply 24 V/150 W, IP67, with prim. shockproof plug, sec. power plug 228 x 68 x 38,8 mm
90321 nt 24/240 67 P Power supply 24 V/240 W, IP67, with prim. shockproof plug, sec. power plug 244,2 x 68 x 38,8 mm
90322 nt 24/320 67 P Power supply 24 V/320 W, IP67, with prim. shockproof plug, sec. power plug 252 x 90 x 43,8 mm
90323 ntV 24/90/4 Power supply 24 V/90 W with prim. contour plug, sec. 4-way distributor, 4 x M12 socket161 x 61 x 36 mm 135 x 55 x 40 mm
24 V connection and distribution system Art.-No. Model Description Dimensions
92800 HV 24/1 24 V main cable mono, power plug to 1 x M12 socket 1,5 m
92801 HV 24/6 24 V 6-way main distributor, power plug to 6 x M12 socket 140 x 55 x 40 mm1,5 m
Plug system & accessories for garden/object and recessed spots
Gar
den,
Bui
ldin
g an
d R
eces
sed
Spot
s
IP 67
Tel. 01372 888 455 | www.flairlight.co.uk
33
Made in Germany dot-spot
12/24 V RGB-Controller/Dimmer
▪ High-quality LED power supplies, ready-made, with safety plug on the primary side and
▪ M12 plug system on the secondary side
▪ Fully encapsulated version, IP 67
▪ protected against short circuit, overload, overvoltage and overtemperature
▪ Input voltage 90 – 305 V DC, 127-431 V DC
▪ Observe installation instructions on p.39
Dimmer
Art.-No. Model Description Dimensions
92702 HV dm 12/3k 12 V 6-way main distributor with integrated radio dimmer, or RGB radio controller, supply line, power plug to 6 x M12 socket
140 x 55 x 40 mm1,5 m
92802 HV dm 24/1k24 V 6-way main distributor with integrated radio dimmer, supply line, power plug to 6 x M12 socket
140 x 55 x 40 mm1,5 m
Wireless remote control for RGB radio dimmer modules
Art.-No. Model Description Dimensions
91501 fb funk 1K Wireless remote control for 12/24 V main distributor with radio dimmer 110 x 70 x 20 mm
91500 fb funk RGB Wireless remote control for 12 V main distributor with radio RGB radio controller 110 x 70 x 20 mm
Distributor for 12-V and 24-V system Art.-No. Model Description Dimensions
94510 UV 2 T T-distributor, 1 x M12 plug on 2 x M12 socket
94511 UV 2 Y Y-distributor, for installation in floor sleeves, 1 x M12 socket on 1 x M12 plug + M12 socket
94512 UV 4 4-way distributor with supply line, 1 x M12 plug on 4 x M12 socket 135 x 55 x 40 mm1,5 m
94513 UV 6 6-way distributor with supply line, 1 x M12 plug on 6 x M12 socket 140 x 55 x 40 mm1,5 m
94514 UV 8 8-way distributor with supply line, 1 x M12 plug on 8 x M12 socket 170 x 55 x 40 mm1,5 m
93601 BS ps M12 Blind cap for open M12 sockets
Extension and connection cable for 12/24 V systemArt.-No. Model Description Dimensions
92205 VLK M12-1,5 Connecting cable, M12 plug /socket Ø 15 mm / 1,5 m
92206 VLK M12-5 Connecting cable, M12 plug /socket Ø 15 mm / 5 m
92207 VLK M12-10 Connecting cable, M12 plug /socket Ø 15 mm / 10 m
92650 AK M12-0,3 ST Connecting cable, M12 plug to open endØ 15 mm / 0,3 m
(5 x 0,34mm²)
Plug system & accessories for garden/object and recessed spots
Gar
den,
Bui
ldin
g an
d R
eces
sed
Spot
s
IP 67
HV dm 12/3kHV dm 24/1k
fb funk 1K fb funk RGB
dot-spot34
Extension and connection cable for 12/24 V system Art.-No. Model Description Dimensions
92651AK M12-5 ST
Connecting cable, M12 plug to open endØ 15 mm / 5 m(5 x 0,34mm²)
92652AK M12-0,3 BU
Connecting cable, open end to M12 socketØ 15 mm / 0,3 m
(5 x 0,34mm²)
92653AK M12-5 BU
Connecting cable, open end to M12 socketØ 15 mm / 5 m(5 x 0,34mm²)
92654 AS P ST+BU Connection set power plug with cable socket and plug, for creating extensions and feeds for dimmers Ø 30 x 58 mm
Shrinking tube for additional sealing Art.-No. Model Description Dimensions
94603 ssk 16/12 Shrinking tube for additional sealing of M12 connections 120 mm
94602 ssk 16/120 Shrinking tube to be cut individually 1200 mm
Control modules for integration into DMX, DALI ore KNX systems
Art.-No. Model Description Dimensions
91310.XXcModule DMX M12
DMX control module for the 12 V / 24 V connection system, controllable dimming module in IP64 housing cable gland per cable on site, power supply input power plug 150 x 150 x 57 mm
91311.XXcModule DALI M12
DALI control module for the 12 V / 24 V connection system, controllable dimming module in IP64 housing cable gland per cable on site, power supply input power plug 150 x 150 x 57 mm
91312.XXcModule KNX M12
KNX control module for the 12 V / 24 V connection system, controllable dimming module in IP64 housing cable gland per cable on site, power supply input power plug 150 x 150 x 57 mm
Art.-No. Model Description
XXXXX.01 12/1k Variant 12/1K dimmer, output 1 x power plug, max. 144 Watts
XXXXX.02 24/1k Variant 24/1K dimmer, output 1 x power plug, max. 300 Watts
XXXXX.03 12/3k/1 Variant RGB, output 1 x M12 housing socket, max. 25 Watts
XXXXX.04 12/3k/6 Variant RGB, output 6 x M12 housing socket, max. 6 x 25 Watts
Plug system & accessories for garden/object and recessed spots
Gar
den,
Bui
ldin
g an
d R
eces
sed
Spot
s
Tel. 01372 888 455 | www.flairlight.co.uk
35
Made in Germany dot-spot
Gar
den,
Bui
ldin
g an
d Re
cess
ed S
pots
Connection examples for garden, building and recessed spots
dot-spot garden / object spots and recessed luminaires can be delivered with different connection features. The following options can be selected depending on the luminaire model:
Connection type Cabling
5 m open cable 10 m open cable
Free cabling
Housing plug, installed 0.3 m with plug 5 m with plug
Plug system
2: Connection of the spots with free cabling, with dimmer
- Dim
Power supply
PWM DimmerInput
Output DimDim
Dimmer constant voltage output (dimmer for LED stripes)
On = Dimming contact to against ground closed, Off = Dimming contact open, maximum PWM frequency 1,000 Hz
1: Connection of the spots with free cabling, without dimmer
- Dim
Attention: bridge (blue) between (–) and (– dim) is mandatory!
Power supply = -
= += DIM
3: Connection of the spots with free cabling, with dimmer; multiple spots, multiple power supplies if necessary
- Dim
- Dim
- Dim
Power supply
Power supply
Do not connect to other power supplies!
PWM Dimmer
Input
Output DimDim
Lights with open cable
The open cable connection of the luminaires must be car-ried out by professionals being electrically trained only. Using open cables, the luminaires can be connected with dot-spot or usual installation accessories. Please note that the protec-tion class of the installation accessories is suitable for the selected type of installation.
Lights with M12 connector system
Regarding the connector system, dot-spot offers a vast range of ready-to-plug accessories for setting up complex systems. All power supplies are equipped with mains plugs, therefore the system can also be installed by persons without electrical training.
The following schematics show indications the cabling of the different systems:
Gar
den,
Bui
ldin
g an
d R
eces
sed
Spot
s
dot-spot36
4. Connection of the spots with free cabling, RGB system
BGR
nt 12/30 nt 12/30
fc funk
230 V / 50 Hz 230 V / 50 Hz
clarios flex beam clarios-mini brilliance-midi brillliance
fb funk
: = -
= += B = G
= R
Small 24 V system, monochromatic
clarios flex beam20115.XX.42
brilliance 10 W30010.XX.XX.42
clarios II grün20015.04.XX.42
brilliance-maxi 20 W30020.XX.XX.40
5 m 5 m 10 m5 m
ntV 24/90/490323
VLK M12-1092207
Connection examples for garden, building and recessed spots
Example systems with connector system
brilliance-mini / -midi with connector system
brilliance-midi 3 W31XXX.XX.XX.40
UV 2 Y94511
Ø 17 mm + Ø 17 mm +Ø 17 mm +
Ø 42 - 45 mm
Tube
Ø 100 mmL 100 mm
Emtpy conduitVLK M12-1,5922051,5 m
......
Paving
80 mm
Tel. 01372 888 455 | www.flairlight.co.uk
Gar
den,
Bui
ldin
g an
d R
eces
sed
Spot
s
37
Made in Germany dot-spot
Connection examples for garden, building and recessed spots
Example RGB system with radio controller
2 mHV dm 12/3k92702
UV 694513
UV 2 T94510
8 x brilliance-midi RGB31100.99.XX.42
8 x brilliance-midi RGB31100.99.XX.42
nt 12/150 67 P90128 2 m
5 m
VLK M12-592206
fb funk91500
PlugSocket
5 m
5 m
5 m
Example 12 V System, monochromatic, dimmed via radio
5 m 0,3 m
5 m
2 m
10 m
5 m
2 m
dome-spot34300.XX.42
UV 494512
VLK M12-1092207
brilliance-mini32100.XX.42
brilliance-mini32100.XX.41
VLK M12-592206
UV 2 T94510
HV dm 12/3k92702
fb funk 1k91501
PlugSocket
dot-spot38
Connection examples for garden, building and recessed spots
Gar
den,
Bui
ldin
g an
d R
eces
sed
Spot
s
24-V system, with external dimmer, DALI, DMX or KNX
brilliance-maxi 20 W30020.XX.XX.40
UV 2 T94510
clarios flex beam 15 hc20116.XX.41
clarios II amber20016.05.XX.42
brilliance 10 W30010.XX.XX.42
clarios II20015.XX.XX.42
slimlux 18 od*63018.09.31.45.XX
clarios II20015.XX.XX.41
UV 494512
UV 2 Y94511
VS-194700
AK M12-0,3 ST92650
VLK M12-109220710 m
5 m2 m5 m
0,3 m
5 m5 m5 m
0,3 m
5 m
nt 24/240 67 P90321
HV 24/692801
2 m
cModule XXX M129131X.02
0,3 m
* = pre-dimmed
DMX/DALI/KNX d
Voltage system 12 V DC
Power output per distance in Watts (power output per socket main distributor or power supply)
Cable length in metres (length between main distributor socket or power supply and the furthest spot)
25 12
20 14
15 17
10 22
5 41
Voltage system 24 V DC Power output per distance in Watts (power output per socket main distributor or power supply)
Cable length in metres (length between main distributor socket or power supply and the furthest spot)
100 20
80 23
60 29
40 41
20 77
Maximum cable length depending on the connected power
The maximum length of the connection cables depends on the power of the connected luminaires. The line length indicates the length between the power supply connector (at the secondary side) or the cable distributor, and the luminaire. As a general rule, the low-voltage connection cables should be as short as possible:
Tel. 01372 888 455 | www.flairlight.co.uk
39
Made in Germany dot-spot
dot-spot M12 cabling system
Gar
den,
Bui
ldin
g an
d R
eces
sed
Spot
s
Theory and practice − Outdoor installation of LED power supplies
Again and again, there are malfunctions or failures of LED power supplies that are installed in outdoor areas. Even if a power supply features the protections IP 67 – water-proof, temporary submersion of up to 30 min. – it can't be unrestrictedly installed in outdoor areas.
The IP 67 testing of the manufacturer is carried out within a defi ned period of time under laboratory conditions. In-fl uences such as permanent moistness, solar irradiation, frost and changing temperatures over the years are not considered.
Therefore, such power supplies, even those featuring high protection classes, should wherever possible be in-stalled in a protected area, e.g. in the cellar, garages or tool sheds. However, in case the power supply needs to be installed in an outdoor area, it should always be installed inside a suitable electrical cabinet in order to protect it against atmospheric infl uences. Direct solar irradiation onto the housing should be avoided.
Weather-related power supply failures are not covered under the manufacturers' warranty!
Power supply buried Power supply unprotected inside the ground shaft
Correct installation inside the electrical cabinet
Power supply inside electrical housing, inserted in elevated position, drainage for ground shaft
dot-spot40
Pool and pond spots aquaros 20
Gar
den,
Bui
ldin
g an
d R
eces
sed
Spot
s
24 VDC
THERMOPROTECT10-35
V4A316 L
▪ 20 W LED recessed spot, pivoting, for pools and ponds, luminosity max. 2100 lm▪ housing V4A surface electropolished, Ø only 100 mm, 5 m connection cable▪ pivoting lamp unit with innovative ball mechanism▪ with THERMOPROTECT protection system, avoids overheating of the LED▪ installation only with installation sleeve aq EH 100, further versions upon request
Art.-No. Model Watt
aquaros 20
20500.XX.XX aq 24 V 20 W V4A/316L 20 W 24 V DC 5 m
Art.-No. CRI Art.-No.
XXXXX.00.XX warm white, 2700 K 1840 lm >80 XXXXX.XX.10 10°
XXXXX.11.XX neutral white, 4000 K 1940 lm >80 XXXXX.XX.20 20°
XXXXX.01.XX cool white, 5700 K 2150 lm >80 XXXXX.XX.35 35°
XXXXX.02.XX blue, 485 nm 466 lm XXXXX.XX.99 diffuse
XXXXX.03.XX green, 535 nm 970 lm
XXXXX.04.XX amber, 595 nm 762 lm
XXXXX.05.XX red, 630 nm 762 lm
XXXXX.98.XX RGBW, 4000 K 1,2 386 lm
1 Operating voltage 12 V, optimum colour mixing only with 35° lens and diffuse2 Available only in the version 10 W
Accessories ► aquaros 20
Art.-No. Model Description
93105 aq EH 100316L stainless steel installation sleeve for setting in concrete walls, or for welding into metal pools, with stainless steel cable gland and 1.5 m empty conduit
93106 aq DS 100 Sealing flange for sealing the installation sleeve aq EH 100 when mounting in plastic and foil pools, stainless steel screw flange, with 6 stainless steel screws and EPDM seal
98006 SW 15 Special tool SW 15 for screwing the cable gland inside oft he Installation sleeve, absolutely required!
Additional accessories from page ► 98
3
73 mm
10
0 m
m
3 mm
75 mm
Ø 5 mm
3 x 0,5 mm²
RGBW 6 x 0,25 mm²
124 mm
1 ,0 mm150 mm
30
mm
1,5 mm
Connection for empty conduit / cable gland VIP 68 internal
XXXXX.XX.99
XXXXX.XX.10XXXXX.XX.20XXXXX.XX.35
Sealing flange only required in case of plastic and liner ponds
Tel. 01372 888 455 | www.flairlight.co.uk
41
Pool and pond spots aquaros 5
Gar
den,
Bui
ldin
g an
d R
eces
sed
Spot
s
Made in Germany dot-spot
6-40THERMOPROTECT
12 VDC
V4A316 L
▪ 5 W LED spot (3 W in case of coloured spots), for pools and ponds, luminosity 230 lm▪ Housing 316L surface electropolished, Ø aperture only 80 mm, connection cable 5 m▪ with THERMOPROTECT protection system, avoids overheating of the LED▪ installation only with installation sleeve EH 50
Accessories ► aquaros 5
Art.-No. Model Description
93107 aq EH 50 316L stainless steel installation sleeve for setting in concrete walls, or for welding into metal pools, with stainless steel cable gland and 1.5 m empty conduit
93108 aq DS 50Sealing flange for sealing the installation sleeve aq EH 50 when mounting in plastic and foil pools, stainless steel screw flange, with 6 stainless steel screws and EPDM seal
98006 SW 15 Special tool SW 15 for screwing the cable gland inside oft he Installation sleeve, absolutely required!
Additional accessories from page ► 98
Art.-No. Model Watt
aquaros 5
20700.XX.XX aq md 12 V 5 W V4A/316L 5 W 12 V DC 5 m
Art.-No. CRI Art.-No.
XXXXX.00.XX warm white, 2700 K 333 lm >80 XXXXX.XX.06 6°
XXXXX.11.XX neutral white, 4000 K 380 lm >80 XXXXX.XX.25 25°
XXXXX.01.XX cool white, 5700 K 433 lm >80 XXXXX.XX.40 40°
XXXXX.02.XX blue, 485 nm 81 lm XXXXX.XX.99 diffuse
XXXXX.03.XX green, 535 nm 173 lm
XXXXX.04.XX amber, 595 nm 122 lm
XXXXX.05.XX red, 630 nm 145 lm
XXXXX.99.XX RGB 1 86 lm
1 Optimum RGB colour mixing only with 40° lens or diffuse
Ø 5 mm
3 x 0,5 mm²
RGB 5 x 0,25 mm²
40 mm80 mm
2 mm
40 mm
90 mm
100 mm
30
mm
1,5 mm
Connection for empty conduit / cable gland VIP 68 internal
XXXXX.XX.99
XXXXX.XX.06XXXXX.XX.25XXXXX.XX.40
sealing flange only required in case of plastic and liner ponds
4 Accent light points
Heavy-duty, microbe-resistant polyurethane connection cable for outdoors installation, or extremely flat twin-cord cable for indoors
Integrated electronic driver unit secures the rated service life of the LED, direct operation with 12 V DC
Stainless steel 316 L housing made of thoroughly fi nished machined parts; salt water and stone salt resistant
Operation at ¾ of the rated current for extended service life of the LED
Photostaining-free front glass
Use of selected, high quality LEDs and electronic componentsPermanently fl exible, special casting
compound; connection line cast into the lamp to ensure durable impermeability, IP 68
100% quality control
Customized manufacturing in Germany
Stainless steel fastening clamp for easy and reliable fi tting
It has never been so easy to fl exibly and selectively imple-ment lighting solutions. The application range of the dot- spot LED accent light points is nearly boundless; indoor, outdoor, as well as underwater, these spotlights work as outstanding styling elements.
Due to their simple, unobtrusive stylishness, dot-spot LED accent lighting harmoniously blend into any surroundings; while almost invisible in the daytime, they create fascinat-ing atmosphere at night.
dot-spot42
Acc
ent
light
poi
nts
Tel. 01372 888 455 | www.flairlight.co.uk
Prater Vienna, 500 mini-disc
dot-spot44
Acc
ent
light
poi
nts
dot-spot accent light point 8, 12 V DC
▪ 8 mm accent light point, robust type for exterior and underwater use, for atmospheric lighting of paths, drives, stairwells etc.
▪ with Nichia brand-name LED, for a long life
▪ high luminosity, resistant to vibration
▪ salt and chlorinated water resistant stainless steel 316 L housing
▪ operable temperature range - 25°C up to + 45°C
▪ microbe-proof PUR cable, directly molded with spot to form a water-tight bond
▪ small, elegant design, inconspicuous in the daytime, dazzle-free and fascinating lighting effects at night
30
mm
12
mm
0,6 mm
13 mm
9,8 mm
M 10x1
8 mm
10 mm
30 mm
1 ... 24 Spots
N / L220 - 240 V AC50 / 60 Hz
-+
12 V DC
10t
V4A316 L
Art.-No. Model Watt
dot-spot
50100.XX.XX dot-spot V4A/316L 0,25 W 12 V DC
Art.-No. CRI Art.-No.
XXXX.00.XX warm white, 2700 K 1,7 lm 80 XXXX.XX.01 5 m PUR
XXXX.01.XX cool white, 6000 K 2,4 lm 80 XXXX.XX.02 10 m PUR
XXXX.02.XX blue, 470 nm 1 lm
XXXX.03.XX green, 528 nm 2 lm
XXXX.04.XX amber, 617 nm 2 lm
XXXX.05.XX red, 625 nm 1 lm
Accessories ► dot-spot
Art.-No. Model Description Dimensions
93401 BF M 8 Installation kit with nut, spacer sleeve and gasket M 8
90104 nt 12/6 doPower supply 12 V 6 W, IP 20 for indoor use, installation in fl ush-mount boxes for a max. of 24 spots
50 x 40,8 x 21,5 mm
90105 nt 12/6 od Set Power supply 12 V 6 W, IP 65 for outdoor use, with water protected junction box, for max. 24 94 x 94 x 57 mm
Additional accessories from page ► 98
Mount for all accent light points, installation depth only 10 mm ► www.dot-spot.de:
Ø 3,5 mm
2 x 0,25 mm²
Tel. 01372 888 455 | www.flairlight.co.uk
45
Acc
ent
light
poi
nts
mini-disc, accent light point 14 mm, 12 V DC
Spot 1
Made in Germany dot-spot
5 t
V4A316 L
▪ 14 mm accent light point, installation depth only 10 mm with mounting clip, or length of 15 mm with screw fixing▪ mini-disc with round design▪ microbe-proof PUR connecting cable, molded water-tight with spot, for exterior installation▪ extremely thin ribbon cable, for mounting in floor, wall and panelling▪ long life > 50,000 hrs, excellent luminosity, resistant to vibration▪ salt and chlorinated water resistant stainless steel 316 L housing▪ operable temperature range - 25°C up to + 45°C▪ small, elegant design, inconspicuous in the daytime, dazzle-free and fascinating lighting effects at night
18 mm
0,6 mm
25 mm
14 mm
10
mm
20 mm
10 mm
1 ... 24 Spots
N / L220 - 240 V AC50 / 60 Hz
-+
12 V DC
Art.-No. Model Watt Design
mini-disc
50400.XX.XX md f V4A/316L 0,25 W 12 V DC Installation diameter (ID) 10 mm
50410.XX.XX md g V4A/316L 0,25 W 12 V DC ID 15 mm with thread + fi tting Kit=ge
Art.-No. CRI Art.-No.
XXXX.00.XX warm white, 2800 K 14 lm 80 XXXX.XX.01 5 m PUR
XXXX.01.XX cool white, 6000 K 16 lm 80 XXXX.XX.02 10 m PUR
XXXX.02.XX blue, 470 nm 2,8 lm XXXX.XX.11 7 m Fbl
XXXX.03.XX green, 528 nm 11 lm
XXXX.04.XX amber, 611 nm 5 lm
XXXX.05.XX red, 625 nm 5 lm
XXXX.99.XX RGB 6 lm
Accessories ► mini-disc
Art.-No. Model Description Dimensions
90104 nt 12/6 do Power supply 12 V 6 W, IP 20 for indoor use, installation in flush-mount boxes for a max of 24 spots 50 x 40,8 x 21,5 mm
90105 nt 12/6 od set Power supply 12 V 6 W, IP 65 for outdoor use, with water protected junction box, for max. 24 spots 94 x 94 x 57 mm
91320
91321
91322
91323
91324
91500
easy RGB II funk
easy RGB II DMX
easy RGB II DALI
easy RGB II KNX
easy RGB II e
fb-funk
RGB controller for max. 34 lights w. power supply
RGB controller as above, but for DMX contr.
RGB controller as above, but for DALI contr.
RGB controller as above, but for KNX/EIB contr.
Expansion modul for 34 more spots
Radio controller for easy RGB II radio
-
200 x 120 x 80 mm
200 x 120 x 80 mm
200 x 120 x 80 mm
-
110 x 70 x 20 mm
Additional accessories from page ► 98
0,6 mm
25 mm
14 mm
M 18 x 1
8,2 mm 15
mm
Ø 3,5 mm PUR
1,3 x 2,8 mm Fbl
2 x 0,25 mm²
RGB: Ø 5 mm,
4 x 0,25 mm²
2 x 0,25 mm²
RGB: 1,6 x 6,4 mm,
4 x 0,25 mm²
quad-dot, accent light point 10 x 10 mm, 12 V DC
▪ 10 x 10 mm accent light point, installation depth only 10 mm with mounting clip▪ with square design▪ microbe-proof PUR connecting cable, molded water-tight with spot, for exterior installation▪ extremely thin ribbon cable, for mounting in floor, wall and panelling▪ long life > 50,000 hrs, excellent luminosity, resistant to vibration▪ salt and chlorinated water resistant stainless steel 316 L housing▪ operable temperature range - 25°C up to + 45°C▪ small, elegant design, inconspicuous in the daytime, dazzle-free and fascinating lighting effects at night
10,5 mm
18 mm
0,6 mm
22 mm
10 mm
20 mm
10 mm
dot-spot46
Acc
ent
light
poi
nts
5 t
V4A316 L
1 ... 24 Spots
N / L
220 - 240 V AC
50 / 60 Hz
-+
12 V DC
Ø 3,5 mm PUR
1,3 x 2,8 mm Fbl
2 x 0,25 mm²
RGB: Ø 5 mm,
4 x 0,25 mm²
2 x 0,25 mm²
RGB: 1,6 x 6,4 mm,
4 x 0,25 mm²
Art.-No. Model Watt Design
quad-dot
50500.XX.XX quad-dot V4A/316L 0,25 W 12 V DC
Art.-No. CRI Art.-No.
XXXX.00.XX warm white, 2800 K 14 lm 80 XXXX.XX.01 5 m PUR
XXXX.01.XX cool white, 6000 K 16 lm 80 XXXX.XX.02 10 m PUR
XXXX.02.XX blue, 470 nm 2,8 lm XXXX.XX.11 7 m Fbl
XXXX.03.XX green, 528 nm 11 lm
XXXX.04.XX amber, 611 nm 5 lm
XXXX.05.XX red, 625 nm 5 lm
XXXX.99.XX RGB 6 lm
Accessories ► quad-dot
Art.-No. Model Description Dimensions
90104 nt 12/6 do Power supply 12 V 6 W, IP 20 for indoor use, installation in flush-mount boxes for a max of 24 spots 50 x 40,8 x 21,5 mm
90105 nt 12/6 od set Power supply 12 V 6 W, IP 65 for outdoor use, with water protected junction box, for max. 24 spots 94 x 94 x 57 mm
91320
91321
91322
91323
91324
91500
easy RGB II funk
easy RGB II DMX
easy RGB II DALI
easy RGB II KNX
easy RGB II e
fb-funk
RGB controller for max. 34 lights w. power supply
RGB controller as above, but for DMX contr. RGB
controller as above, but for DALI contr. RGB
controller as above, but for KNX/EIB contr.
Expansion module for 34 more spots
Radio controller for easy RGB II radio
-
200 x 120 x 80 mm
200 x 120 x 80 mm
200 x 120 x 80 mm
-
110 x 70 x 20 mm
Additional accessories from page ► 98
Tel. 01372 888 455 | www.flairlight.co.uk
1 ... 24 Spots
N / L220 - 240 V AC50 / 60 Hz
-+
12 V DC
47
Acc
ent
light
poi
nts
Made in Germany dot-spot
disc-dot, quad-dot 45, accent light points 20 mm, 12 V DC
disc-dotdisc-dotquad-dot 45
▪ 20 mm accent light point, installation depth only 10 mm with mounting clip
▪ disc-dot with round, quad-dot 45 with square design
▪ microbe-proof PUR connecting cable, molded water-tight with spot, for exterior installation
▪ extremely thin ribbon cable 1,4 mm x 2,6 mm, for mounting in floor, wall and panelling
▪ long life > 50,000 hrs, excellent luminosity, resistant to vibration
▪ salt and chlorinated water resistant stainless steel 316 L housing
▪ operable temperature range - 25°C up to + 45°C
▪ striking, high quality design, dazzle-free, fascinating lighting effects
V4A316 L
Art.-No. Model Watt Design
disc-dot / quad-dot 45
50700.XX.XX disc-dot V4A/316L 0,25 W 12 V DC Ø 45 mm
50800.XX.XX quad-dot 45 V4A/316L 0,25 W 12 V DC 45 x 45 mm
Art.-No. CRI Art.-No.
XXXX.00.XX warm white, 2800 K 14 lm 80 XXXX.XX.01 5 m PUR
XXXX.01.XX cool white, 6000 K 16 lm 80 XXXX.XX.02 10 m PUR
XXXX.02.XX blue, 470 nm 2,8 lm XXXX.XX.11 7 m Fbl
XXXX.03.XX green, 528 nm 11 lm
XXXX.04.XX amber, 611 nm 5 lm
XXXX.05.XX red, 625 nm 5 lm
XXXX.99.XX RGB 6 lm
45 mm
20 mm
45 mm38 mm
10
mm
0,6 mm
40 mm
10 mm
quad-dot 45
45 mm
38 mm
10
mm
0,6 mm20
mm
40 mm
10 mm
disc-dot
Ø 3,5 mm PUR
1,3 x 2,8 mm Fbl
2 x 0,25 mm²
RGB: Ø 5 mm,
4 x 0,25 mm²
2 x 0,25 mm²
RGB: 1,6 x 6,4 mm,
4 x 0,25 mm²
Accessories ► disc-dot / quad-dot 45
Art.-No. Model Description Dimensions
90104 nt 12/6 do Power supply 12 V 6 W, IP 20 for indoor use, installation in flush-mount boxes for max of 24 spots 50 x 40,8 x 21,5 mm
90105 nt 12/6 od set Power supply 12 V 6 W, IP 65 for outdoor use, with water protected junction box, for max. 24 spots 94 x 94 x 57 mm
91320
91321
91322
91323
91324
91500
easy RGB II funk
easy RGB II DMX
easy RGB II DALI
easy RGB II KNX
easy RGB II e
fb-funk
RGB controller for max. 34 lights w. power supply
RGB controller as above, but for DMX contr.
RGB controller as above, but for DALI contr.
RGB controller as above, but for KNX/EIB contr.
Expansion module for 34 more spots
Radio controller for easy RGB II radio ▪
-
200 x 120 x 80 mm
200 x 120 x 80 mm
200 x 120 x 80 mm
-
110 x 70 x 20 mm
Additional accessories from page ► 98
dot-spot48
Acc
ent
light
poi
nts
frog-dot, accent light points 14 mm, with lense, 0,25 W / 0,5 W
12 VDC
▪ 14 mm accent light point, installation depth only 10 mm with mounting clip▪ with round design▪ microbe-proof PUR connecting cable diameter 3,4 mm, molded water-tight with spot, for exterior installation▪ extremely thin ribbon cable, for mounting in floor, wall and panelling▪ long life > 50,000 hrs, excellent luminosity, resistant to vibration▪ salt and chlorinated water resistant stainless steel 316 L housing▪ operable temperature range - 25°C up to + 45°C▪ small, elegant design, inconspicuous in the daytime, dazzle-free and fascinating lighting effects at night
18 mm
0,6 mm
25 mm
4 mm
10 mm
14 mm
20 mm
10 mm
V4A316 L
Art.-No. Model Watt Design
frog-dot 0,25 W
50600.XX.XX frog-dot V4A/316L 0,25 W 12 V DC with lens
Art.-No. CRI Art.-No.
XXXX.00.XX warm white, 2800 K 14 lm 80 XXXX.XX.01 5 m PUR
XXXX.02.XX blue, 470 nm 2,8 lm XXXX.XX.02 10 m PUR
XXXX.03.XX green, 528 nm 11 lm XXXX.XX.11 7 m Fbl
XXXX.04.XX amber, 611 nm 5 lm
XXXX.05.XX red, 625 nm 5 lm
XXXX.99.XX RGB 6 lm
Art.-No. Model Watt Design
Frog-dot super bright 0,5 W ▪ 50605.XX.XX frog-dot V4A/316L 0,5 W 12 V DC with lens
Art.-No. CRI Art.-No.
XXXX.00.XX warm white, 2800 K 35 lm 80 XXXX.XX.01 5 m PUR
XXXX.11.XX neutral white, 4000 K 35 lm 80 XXXX.XX.02 10 m PUR
XXXX.01.XX cool white, 6000 K 39 lm 80 XXXX.XX.11 7 m Fbl
Accessories at page : 45
Ø 3,5 mm PUR
1,3 x 2,8 mm Fbl
2 x 0,25 mm²
RGB: Ø 5 mm,
4 x 0,25 mm²
2 x 0,25 mm²
RGB: 1,6 x 6,4 mm,
4 x 0,25 mm²
1 ... 24 Spots
N / L220 - 240 V AC50 / 60 Hz
-+
12 V DC
Tel. 01372 888 455 | www.flairlight.co.uk
49
Made in Germany
starlight-crystal 12 Vstarlight-crystal 12 V, with Swarovski crystal
25
mm
18 mm
0,6
mm
25 mm
14 mm
15 mm
10 mm
20 mm
10 mm
1 ... 24 Spots
N / L220 - 240 V AC50 / 60 Hz
-+
12 V DC
▪ accent lighting with Swarovski crystal, assembly depth on 10 mm with mounting clip▪ fascinating star shaped lighting effect; ideal for combining with fibre optic sets▪ connecting cable moulded water-tight with spot, for interior and exterior installation,▪ long life > 50,000 hrs, excellent luminosity, resistant to vibration▪ salt and chlorinated water resistant stainless steel 316 L housing▪ operable temperature range - 25°C up to + 45°C
Acc
ent
light
poi
nts
V4A316 L
Art.-No. Model Design
starlight-crystal
50905.XX.XX stl V4A/316L 12 V DC with lens
Art.-No. Watt CRI Art.-No.
XXXX.00.XX warm white, 2800 K 0,5 W 35 lm 80 XXXX.XX.01 5 m PUR
XXXX.01.XX cool white, 6000 K 0,5 W 39 lm 80 XXXX.XX.02 10 m PUR
XXXX.02.XX blue, 470 nm 0,25 W 2,8 lm XXXX.XX.11 7 m Fbl
XXXX.03.XX green, 528 nm 0,25 W 11 lm
XXXX.04.XX amber, 611 nm 0,25 W 5 lm
XXXX.05.XX red, 625 nm 0,25 W 5 lm
XXXX.99.XX RGB 0,25 W 6 lm
Ø 3,5 mm PUR
1,3 x 2,8 mm Fbl
2 x 0,25 mm² RGB: Ø 5 mm, 4 x 0,25 mm²
2 x 0,25 mm²RGB: 1,6 x 6,4 mm, 4 x 0,25 mm²
Accessories ► starlight-crystal
Art.-No. Model Description Dimensions
90104 nt 12/6 do Power supply 12 V 6 W, IP 20 for indoor use, installation in fl ush-mount boxes for a maximum of 24 spots (0,25 W) / 12 spots (0,5 W) 50 x 40,8 x 21,5 mm
90105 nt 12/6 od setPower supply 12 V 6 W, IP 65 for outdoor use, with water protected junction box, for a maximum of 24 spots (0,25 W) / 12 spots (0,5 W) 94 x 94 x 57 mm
91320
91321
91322
91323
91324
91500
easy RGB II funk
easy RGB II DMX
easy RGB II DALI
easy RGB II KNX
easy RGB II e
fb-funk
RGB controller for max. 34 lights w. power supply
RGB controller as above, but for DMX contr. RGB
controller as above, but for DALI contr. RGB
controller as above, but for KNX/EIB contr.
Expansion module for 34 more spot
Radio controller for easy RGB II radi
-
200 x 120 x 80 mm
200 x 120 x 80 mm
200 x 120 x 80 mm
-
110 x 70 x 20 mm
additional accessories from page ► 98
dot-spot
dot-spot50
starlight fiber-optic, 3 W
100 mm 3 m
2 m
70 mm
▪ star canopy with 121 light dots of 1 mm diameter; for creating decorative star constellations; ideal in combination with starlight-crystal
▪ fibre optic system with LED projector 3 W and fibre optic bundle, 60 fibres 2 m length, 61 fibres 3 m length▪ 3 variants available
- single colour: fixed colour- RGB: for dynamic colour change with easy RGB control unit- spark: glitter effect thanks to light dots fading in and out at irregular intervals
▪ Set with LED projector, fibre optic bundle and power supply▪ long life > 50,000 hrs, excellent luminosity, resistant to vibration▪ operable temperature range projector - 25°C up to + 45°C
Star
ry S
ky
Art.-No. Watt
starlight fi ber-optic 12 V ▪ single color
51000.00 3 W 230 V AC warm white, 3000 K 210 lm 121 x 1 mm 5 m Schuko
51000.01 3 W 230 V AC cool white, 6500 K 360 lm 121 x 1 mm 5 m Schuko
starlight fi ber-optic RGB
51000.99 3 W easy RGB RGB 120 lm 121 x 1 mm 5 m
starlight fi ber-optic spark ▪ glitter effect
51100.01 1,5 W 230 V AC cool white, 6500 K 150 lm 121 x 1 mm 5 m Schuko
230 VAC
Tel. 01372 888 455 | www.flairlight.co.uk
51
dot-spotMade in Germany
Accent light points
Acc
ent
light
poi
nts
dot-spot52
5 Colourgarden Sets
Col
ourg
arde
n lig
htin
g se
ts
▪ Garden lighting made in Germany
▪ Functional complete sets with all parts required for operation
▪ Sales promoting package, ideal for retail stores
▪ Promotionally effective shelf, available with product samples in operation
LED recessed spot 3 W, triple set
LED recessed spot 1 W, triple set
Accent light points outdoor, set of 5
LED garden spot, single set, triple setLED garden spot with color change, single Set, triple Set LED garden spot 230 V, single Set
Accent light points indoor, set of 5
Page 49 Page 50 Page 52Page 51
Page 53 Page 54 Page 55
Tel. 01372 888 455 | www.flairlight.co.uk
53
dot-spotMade in Germany
ALU
Col
ourg
arde
n lig
htin
g se
ts
Colourgarden RGB complete set, 230 V / 12 V, 5 W
▪ compact LED luminaire with 5 W RGB illuminant▪ full set, with LED spotlight, 5 m cable with low voltage plug, 12 V power supply, IR remote control, stainless steel peg and
assembly bracket, triple distributor (only set of 3)▪ 16 fixed colours, 4 colour changing programmes and 4 dim levels selectable via IR remote control▪ unique design, aluminum body, anodised in silver colour, RGB LED illuminant changeable▪ excellent thermal management for a long LED life▪ operable temperature range - 25°C up to + 45°C
RGB triple set wiring diagram
12 V / 5 W
230 V 50 Hz12 V
5 m 5 m
5 m Power supplyTriple distributor
12 V
Single set
Triple set
50mm
70 mm
80 mm
60 mm
100 mm
250 mm
Ø 30 mm
Art.-No. Model Watt
colourgarden RGB-Spot ► set of 1
25001 cl RGB s1 alu/silver 5 W 12 V AC LED RGB ca. 120 lm 60° 5 m
colourgarden RGB-Spot ► set of 3
25003 cl RGB s3 alu/silver 5 W 12 V AC LED RGB ca. 120 lm 60° 5 m
Replacement illuminant 96000 lm RGB - 5 W 12 V AC LED RGB ca. 120 lm 60° -
dot-spot54
Col
ourg
arde
n lig
htin
g se
ts
Colourgarden LED spotlight complete set, 230 V, 4 W
50mm
70 mm
80 mm
60 mm
100 mm
250 mm
Ø 30 mm
▪ compact LED luminaire with 4 W for direct connection to 230 V line voltage
▪ full set, with LED spotlight, 5 m cable with shockproof plug, stainless steel peg and assembly bracket
▪ Unique design, aluminum body, anodised in silver colour
▪ excellent thermal management for a very long LED life
▪ operable temperature range - 25°C up to + 45°C
LED-Spot 230 V, 4 W Set ► wiring diagram
230 V 50 Hz
Safety contact socket5 m
230 V AC
mm80 m
Art.-No. Model Watt CRI
Colourgarden LED-Spot 230 V
25000 cl 230 V s1 alu/silver 4 W 230 V AC warm white, 3000 K 145 lm 80 45° 5 m
230 VAC
ALU
Tel. 01372 888 455 | www.flairlight.co.uk
55
Colourgarden Minispot complete set, 230 V / 12 V, 3 W
▪ compact LED luminaire with 3 W
▪ full set, with LED spotlight, 5 m cable with low voltage plug, 12 V power supply, stainless steel peg, assembly bracket and
triple distributor (only set of 3)
▪ unique design, aluminum body, anodised in silver colour
▪ with THERMOPROTECT system for a long LED life
▪ operable temperature range - 25°C up to + 45°C
Single set
Triple set
50 mm
30mm
50mm
65 mm
250 mm
Ø 30 mm
38 mm
Minispot 12 V, 3 W ▪ triple set wiring diagram
12 V / 3 W
230 V 50 Hz12 V
5 m 5 m
5 m
5 m
Power supplyTriple distributor
12 V
Made in Germany dot-spot
Colo
urga
rden
ligh
ting
sets
Art.-No. Model Watt CRI
Colourgarden Minispot ► set of 1
25101 clm s1 alu/silver 3 W 12 V AC/DC warm white 2700 K 207 lm 80 40° 5 m
Colourgarden Minispot ► set of 3
25103 clm s3 alu/silver 3 W 12 V AC/DC warm white 2700 K 207 lm 80 40° 5 m
ALU
Colourgarden LED recessed spot 230 V / 12 V, 1 W, complete set of 3 spots
▪ LED recessed spot with 1 W power LED, direct operation with 12 V AC/DC, diffuse light emission, perfectly suitable as way and marking light, for installation in floors, walls and ceilings
▪ complete set, consisting of:
- 3 spots, with 5 m connection cable and low-voltage plug - 3 mounting sleeves 83 x Ø 44 mm- 1 x triple distributor- Power supply 12 V 6 W
▪ glare ring, round, in 316L stainless steel, anodized aluminum housing; operable temperature range - 25°C up to + 45°C
dot-spot56
Colourgarden LED Recessed spot 12v, 1w - Triple set wiring diagram
12 V / 1 W
5 m 5 m 5 m
Power supply
230 V 50 Hz
Triple distributor
12 V
Colo
urga
rden
ligh
ting
sets
38 mm
50
mm
2 mm
42 - 45 mm
60 mm
50 mm
32
mm
40
mm
Art.-No. Model Watt CRI
Colourgarden LED recessed spot 1 W set of 325203 bm s3 V4A/Alu 3 x 1 W 12 V AC/DC warm white, 3000 K 88 lm 80 120° diffuse 5 m
ALU V4A316 L
Tel. 01372 888 455 | www.flairlight.co.ukTel. 01372 888 455 | www.flairlight.co.uk
Tel. 01372 888 455 | www.flairlight.co.uk
Tel. 01372 888 455 | www.flairlight.co.uk
57
Colourgarden LED recessed spot 230 V / 12 V, 3 W, complete set of 3 spots
Colourgarden LED recessed spot 12 V, 3 W ▪ triple set wiring diagram
12 V / 3 W
230 V 50 Hz
5 m 5 m 5 m
12 V
Power supplyTriple distributor
12 V
Made in Germany dot-spot
Colo
rgar
den
light
ing
sets
38 mm
50
mm
2 mm
42 - 45 mm
60 mm
50 mm
32
mm
40
mm
▪ LED recessed spot with 3 W power LED, direct operation with 12 V AC/DC, beam angle 40°, ideal for illuminating plants and architecture or as wall or floor sidelight; installation in floors, walls and ceilings
▪ complete set, consisting of:- 3 spots, with 5 m connection cable and low-voltage plug - 3 mounting sleeves 83 x Ø 44 mm- 1 x triple distributor- 1 power supply 12 V 20 W
▪ Glare ring, round, in 316L stainless steel, anodized aluminum housing; operable temperature range - 25°C up to + 45°C
Art.-No. Model Watt CRI
Colourgarden LED recessed spot 3 W set of 325303 bmd s3 V4A/Alu 3 x 3 W 12 V AC/DC warm white, 3000 K 207 lm 80 40° 5 m
ALU V4A316 L
Colourgarden set of 5 accent light points 230 V / 12 V, 0,25 W for outdoor use
Colo
urga
rden
ligh
ting
sets
dot-spot58
▪ 14 mm accent light points, installation depth only 10 mm with mounting clamp; for accentuating terraces, ways, staircases, ponds and many more
▪ microbe-resistant PUR connection cable diameter 3.4 mm, directly grouted with the spot, waterproof, for outdoor installation
▪ complete set, consisting of 5 accent light points, with outdoor power supply
▪ long service life > 50,000 h, insensitive to vibration
▪ chlorine and brine-resistant 316L stainless steel housing
▪ operable temperature range from - 25°C to + 45°C
▪ small, elegant design, unobtrusive during the day, fascinating and glare-free light effect in the evening
18 mm
0,6 mm
25 mm
14 mm
10
mm
20 mm
10 mm
Art.-No. Model Watt CRI Design
Colourgarden set of accent light points for outdoor use 25405 md s5 od V4A 0,25 W 12 V AC/DC warm white, 3000 K 1 14 lm 80 120° diffuse 5 m
Accent light point set of 5 wiring diagram outdoor
12 V
N / L220 - 240 V AC
50 / 60 Hz-+
12 V DC
5 m5 m5 m5 m5 m
V4A316 L
1 Possible colour deviation from the standard products
Tel. 01372 888 455 | www.flairlight.co.uk
Colo
urga
rden
ligh
ting
sets
59
Colorgarden set of 5 accent light points 230 V / 12 V, 0,25 W for indoor use
▪ 14 mm accent light points, installation depth only 10 mm with mounting clamp; for accentuating parquet/laminate floors or tiled surfaces in the bathroom, shower, hallway, kitchen and living area
▪ extremely thin twin strand 1.4 mm x 2.6 mm, for indoor installation in floors, walls and claddings
▪ complete set, consisting of 5 accent light points, with indoor power supply for installation in flush-mount boxes
▪ long service life > 50,000 h, insensitive to vibration
▪ chlorine and brine-resistant 316L stainless steel housing
▪ operable temperature range from - 25°C to + 45°C
▪ small, elegant design, unobtrusive during the day, glare-free and fascinating light effect in the evening
18 mm
0,6 mm
25 mm
14 mm
10
mm
20 mm
10 mm
Made in Germany dot-spot
Accent light point set of 5 wiring diagram indoor
12 V
7 m7 m
N / L220 - 240 V AC
50 / 60 Hz-+
12 V DC
Standard flush-mount/surface mount box
Art.-No. Model Watt CRI Design
Colourgarden set of accent light points for indoor use 25415 md s5 id V4A 0,25 W 12 V AC/DC warm white, 3000 K 1 14 lm 80 120° diffuse 7 m
V4A316 L
1 Possible colour deviation from the standard products
LED Linear Lighting, general information 6LE
D L
inea
r Lig
htin
g
dot-spot60
Slimlux linear lighting support a variety of design options in interior and exterior applications.
dot-spot custom manufactures all linear lighting to suit your dimensional specifi cations upon request. The LED stripes are perfectly matched to the specific profiles, this ensures perfectly accentuated lighting for any installation scenario. The linear lighting shown here are just a small selection from the huge variety of slimlux linear lighting design options. Two technologies are used for LED light strips:
Resistor
1. dot-spot standard LED stripes with series resistors
Fixed-value series resistors are used for current limitation. Changes in temperature or operating voltage will not be compensated. Therefore, with longer distances, the bright-ness can be reduced at the end of the stripe. Furthermore, depending from the application, these stripes have a shorter service life than LED stripes with driver electron-ics. The service life of standard LED stripes by dot-spot is approx. 20,000 – 50,000 hours. dot-spot standard LED stripes should only be used for applications with shorter daily duty cycle, e.g. in the private segment.
Driver
2. dot-spot premium LED stripes with driver electronics
These LED stripes are equipped with an integrated current limiter that always adjusts the current fl owing through the LED to the optimum value in case of voltage and temper-ature changes. With that, a high service life (> 50,000 h) and a homogenous illumination pattern is achieved.
dot-spot Premium LED stripes exclusively use LEDs from known brands with a very fine selection. dot-spot Premium LED stripes should always be used when a high light qual-ity and a long service life are required, e.g. in the commercial sector where duty cycles are rather extended.
Tel. 01372 888 455 | www.flairlight.co.uk
ECB Euro Tower with LED cornice lighting slimlux 18
LED Linear Lighting, general information
LED
Lin
ear L
ight
ing
dot-spot62
LED light strips with visible light points are for funfairs! Homogeneously glowing linear lightings stand for light design!
LED light strips with visible light points are at best suitable for indirect lighting. Also in this case the LED strips should be laid in LED profi les in order to protect the from damage and for easier cleaning.
dot-spot provides you with ready-made LED linear lighting. Depending on the application, you can choose between 2 different LED strip quality standards. It is not possible to achieve homeogenour illumination pattern with the single LED profiles using any LED strip. Please not the inofrmation on the respective profiles
2. Standard LED strip, low-cost LED‘s, low-cost technology
▪ simple current control via series resistors
▪ LED strip and LED‘s from the Asian brand
manufacturer
▪ Use: In the private sector or commercial sector
with average and low daily operating duration
Note: Line lights made of aluminum are not suitable for floor installation and installation in concrete elements in outdoor areas. In this case, please use the slimlux 19 VA or slimlux 18/30 od profiles.
The power indicated is the rated output of the LED strip. The actual power consumption may be lower.
1. Premium LED strip, best technology, best durability
▪ with integrated driver electronics for a long life
▪ high-quality LED‘s from brand manufacturers
▪ German or European production or production
according to quality standards respectively
▪ Use: In the commercial sector, with high daily operating
duration, outdoor applications
▪ high continuity due to the best selection of LED‘s,
high CRI value
Choose LED strips from 2 quality/price ranges
Tel. 01372 888 455 | www.flairlight.co.uk
LED Linear Lighting, general information
LED
Lin
ear L
ight
ing
dot-spotMade in Germany
On the following pages you will find a small selection of LED Strips with matching profiles.The aluminium profiles are anodised and equipped with a UV-resistant and breakproof polycarbonate cover.
Further profi les and LED strips are available upon request, e.g.:
▪ LED strips with higher luminance▪ LED strips with adjustable light colour▪ RGB LED strips with chaser function▪ RGBW light strips with separate white light ▪ and many more...
Optionally, linear lighting with plug connector
Linear lighing with plug connector Feed line 5 m
LN
230 V 50 Hz
24 V
Additional linear lightings
Power supplystandard for slimlux 10 and 15
Linear lighting with cable connection
Linear lighing Standard connector, feed line 5 m
LN
230 V 50 Hz
24 V
Additional linear lightings
Power supply
RGB wiring diagram with fc funk ▪
+BGR
-+
fb funk
power supplyLinear lighting
24 V DC
fc funk (DMX-, DALI-, KNX-Controller)
in
out
.
.
.
63
LED Linear Lighting, Standard packing
LED
Lin
ear L
ight
ing
dot-spot64
Packed LED line lights
All slimlux light lines can be shipped ready for connection and packed to measure. With standard packing the light lines are cut to the required length and furnished with end caps, connection cable and mounting material if necesassary.
Packed slimlux LED line lights IP 20
Allowance at the beginning + n x cutting dimension + allowance at the end = Result
15 mm + 18 x 75 mm = 1350 mm + 15 mm = 1380 mm profile length
Depending on the LED stripe being used there are specific optimum LED profile lengths. A good illumination reaching to the ends of the stripe is achieved if the cutting dimensions are being adhered to. In case the profile length differs from the recommended dimensions the perfect illuminaion up the ends may not be guaranteed anymore.
Formula for calculating the profi le length (example):
Packed slimlux LED line lights IP 67
Ordering ready-made light bars:
The item numbers of light bars are composed as follows:
A = length-dependent item number. In case of multiple light bars of the same type, specify the total length of all parts.
B = Quantity-dependent item number. Specify the number of light bars here.
Example: Ordering 1 light bar 1.20 m and one light bar 1.60 m of the same type as follows:
2,80 m Item number A
2 Stck. Item number B
Tel. 01372 888 455 | www.flairlight.co.uk
LED
Lin
ear L
ight
ing
dot-spotMade in Germany
65
In addition to the standard packing also individual packings can be implemented. The following features can be selected/modifi ed:
D
A
C
BY
C
B
D
mm
W W W
X X
ZZZ
X
lateral outer lateral inner top
mm mm mm
°
mm
°
mm
°
mm
B ► 5 m open end
D ► 0.15 m with connector plug IP 20 inside, IP 67 outside + connection cable 5 m with socket
E ► two-sided connection, left: 0.15 m with connector plug, right 0.15 mm connection cable with socket, each IP 20 inside, IP 67 outside
.....
4. Please, specify special requests here
1. Cable outlet
3. Angle cut
2. Connection cable variants
LED Linear Lighting, individual packing
dot-spot66
LED Linear Lighting slimlux 3,5
LED
Lic
htlin
ien ▪ L
ED L
inea
r Lig
htin
g ▪ L
igne
s lu
min
euse
s LE
D
ALU
▪ elegant light line, only 3.5 mm in width, 4.8 W/m
▪ stylish light accents for bathrooms, kitchens and floors
▪ for tile installation in the floor and the wall, also in wet areas
▪ production length max. 3 m, connection cable 7 m twin strand
▪ made to measure, with mitre cut upon request
Art.-No. Model Watt
Profile65003.XX.XX sl 3,5 ALU 4,8 W/m 12 V DC 7 m zl
96501 End with mitre cut
Art.-No. CRI
Lighting colourXXXX.00.47 warm white, 2700 K 14 lm 80 16 mm 5/5 mm
XXXX.01.47 cool white, 5000 K 16 lm 80 16 mm 5/5 mm
XXXX.02.47 blue, 470 nm 2,8 lm - 16 mm 5/5 mm
XXXX.04.47 amber, 611 nm 5 lm - 16 mm 5/5 mm
XXXX.05.47 red, 625 nm 5 lm - 16 mm 5/5 mm
9,7 mm
3,5 mm
12
,6 m
m
max. 3 m
Perfect illumination: addition beginning + n x cut + addition end
1 Permanently elastic joint
2 Light conductor
3 Silicone profi le
4 Tile
5 Aluminium profi le
6 PU glue
7 Tile glue
8 F loor/wall
12
3
5
4
6 7
8
Accessories from page : 94
1,3 x 2,8 mm
2 x 0,25 mm²
Tel. 01372 888 455 | www.flairlight.co.uk
15 mm
3,2 mm
10,8 mm
max. 3 m
9,6 mm
6 mm
67
LED
Lin
ear
Ligh
ting
dot-spotMade in Germany
LED Linear Lighting slimlux XS 10x15
▪ narrow line light for surface and integrated mounting, only 10 mm in width
▪ homogenous illumination pattern
▪ made to measure, with end caps, max. length 3 m , further LED strips upon request
Art.-No. Model Design
Profile
62100.20.XX sl XS 10x15 IP 20 ALU 24 V DC with diffuse cover
62100.67.XX sl XS 10x15 IP 67 ALU 24 V DC with diffuse grouting 1
Art.-No. Model CRI Watt
LED strip XXXXX.XX.01 Standard ww, 2700 K ca. 800 lm/m >80 9,6 W/m 50 mm 10 mm
XXXXX.XX.03 Standard nw, 4000 K ca. 820 lm/m >80 9,6 W/m 50 mm 10 mm
XXXXX.XX.06 Standard kw, 6500 K ca. 840 lm/m >80 9,6 W/m 50 mm 10 mm
1 The grouting increases the lighting colour value
Perfect illumination: addition beginning + n x cut + addition end
A
Art.-No. Connection and end caps
Connection and end caps
62101.455 m5 m5 m
Metal end caps and standard packing, open cable
62101.410,15 m0.15 m0,15 m
Metal end caps and standard packing, plug on one side
62101.420,15 m0.15 m0,15 m
Metal end caps and standard packing, plug/socket
Accessories ► slimlux XS
Art.-No. Model Description Unit
95062 sl XS ms Installation profi le for sl
1 m
Additional accessories from page ► 98
B
ALUIP 20IP 67
Ø 4 mm
32 mm
Ø 9 mm
2 x 0,25 mm²
dot-spot68
LED Linear Lighting slimlux 7/7 K
LED
Lin
ear
Ligh
ting
▪ flat line light for surface and integrated mounting (sl 7 K), only 7 mm in height
▪ no homogenous illumination pattern
▪ made to measure, with end caps, max. length 3 m
▪ further versions upon request
ALU
Art.-No. Model Design
Profile
62070.20.XX sl 7 IP 20 ALU 24 V DC with diffuse cover
62070.67.XX sl 7 IP 67 ALU 24 V DC with diffuse grouting 1
62071.20.XX sl 7 K IP 20 ALU 24 V DC with diffuse cover
62071.67.XX sl 7 K IP 67 ALU 24 V DC with diffuse grouting 1
Art.-No. Model CRI Watt
LED stripXXXXX.XX.01 Standard warm white, 2700 K ca. 1050 lm/m >80 9,6 W/m 50 mm 10 mm
XXXXX.XX.03 Standard neutral white, 4000 K ca. 1200 lm/m >80 9,6 W/m 50 mm 10 mm
XXXXX.XX.08 Standard RGB ca. 283 lm/m - 14,4 W/m 100 mm 15 mm
XXXXX.XX.09 Standard RGBW, 3000 K 2 ca. 1120 lm/m - 19,2 W/m 100 mm 15 mm
1 The grouting increases the lighting colour value
1 mm
17,5 mm
7 mm
max. 3 m
12,2 mm
1 mm
24,5 mm
7 mm5,5 mm
max. 3 m
17,5 mm
12,2 mm
A
Accessories ► slimlux 7
Art.-No. Model Description Unit
95001 sl 7 mc Mounting clip for sl 7 profi le 1 piece
Additional accessories from page ► 98
Art.-No. Connection and end caps
Connection and end caps
62072.455 m5 m5 m
Plastic end caps and standard packing, open cable
62072.410,15 m0.15 m0,15 m
Plastic end caps and standard packing, plug on one side
62072.420,15 m0,15 m0,15 m
Plastic end caps and standard packing ,with plug/ socket
B
Perfect illumination: addition beginning + n x cut + addition end
IP 20IP 67
Ø 4 mm
32 mm
Ø 9 mm
2 x 0,25 mm²RGB 4 x 0,25 mmRGBW 6 x 0,25 mm²
2 Available open only with 5 m connection
Tel. 01372 888 455 | www.flairlight.co.uk
69
LED
Lin
ear
Ligh
ting
dot-spotMade in Germany
LED Linear Lighting slimlux 19 F
▪ flat line light for surface mounting, width 18.4 mm, height 13 mm
▪ with standard LED stripe, no homogenous illumination pattern
▪ made to measure, with end caps, max. length 5 m
▪ further versions upon request
ALU
Art.-No. Model Design
Profile
62191.20.XX sl 19 F IP 20 ALU 24 V DC with diffuse cover
62191.21.XX sl 19 F IP 20 ALU 24 V DC with transparent cover
62191.67.XX sl 19 F IP 67 ALU 24 V DC with transparent grouting 1
Art.-No. Model CRI Watt
LED strip
XXXXX.XX.01 Standard warm white 2700 K ca. 1050 lm/m >80 9,6 W/m 50 mm 10 mm
XXXXX.XX.03 Standard neutral white 4000 K ca. 1200 lm/m >80 9,6 W/m 50 mm 10 mm
XXXXX.XX.08 Standard RGB ca. 283 lm/m - 14,4 W/m 100 mm 15 mm
XXXXX.XX.09 Standard RGBW, 3000 K 2 ca. 1120 lm/m - 19,2 W/m 100 mm 15 mm
max. 5 m
13,4 mm
15 mm
18,4 mm
8 mm
13 mm
A
180°Accessories ► slimlux 19 F
Art.-No. Model Description Unit
95015 sl 19 hk 1 Mounting clip for sl 19 1 pair
95016 sl 19 hk 2 Mounting clip 45° for sl 19 1 pair
95017 sl 19 hk 3 Pivoting mounting clip for sl 19 1 pair
95018 sl 19 mv Mounting clip for sl 19 1 piece
Additional accessories from page ► 98
Perfect illumination: addition beginning + n x cut + addition end
Art.-No. End caps Art.-No.
End caps Connection
62191A.50.XX Plastics XXXXX.XX.45 5 m
62191A.51.XX Metal XXXXX.XX.41 0,15 m
62191A.52.XX Metal with fixing lugs XXXXX.XX.42 0,15 m
B
IP 20IP 67
Ø 4 mm
32 mm
Ø 9 mm
2 x 0,25 mm²RGB 4 x 0,25 mmRGBW 6 x 0,25 mm²
1 The grouting increases the lighting colour value 2 Available open only with 5 m connection
dot-spot70
LED Linear Lighting slimlux 19
LED
Lin
ear
Ligh
ting
▪ Line light for surface mounting, width 18.4 mm, height 19 mm
▪ with standard LED stripe, homogenous illumination pattern
▪ made to measure, with end caps, max. length 5 m
▪ further versions upon request
ALU
Art.-No. Model Design
Profile
62190.20.XX sl 19 IP 20 ALU 24 V DC with diffuse cover
62190.671.XX sl 19 IP 64 TV ALU 24 V DC partially grouted, with diffuse cover
62190.67.XX sl 19 IP 67 ALU 24 V DC with diffuse full grouting 1
max. 5 m
13,4 mm
15 mm
18,4 mm
8 mm
19 mm
180°
AArt.-No. Model CRI Watt
LED stripXXXXX.XX.21 Premium warm white 2700 K ca. 600 lm/m >80 9,6 W/m 100 mm 10/10 mm
XXXXX.XX.23 Premium neutral white 4000 K ca. 650 lm/m >80 9,6 W/m 100 mm 10/10 mm
XXXXX.XX.25 Premium cool white 6300 K ca. 670 lm/m >80 9,6 W/m 100 mm 10/10 mm
XXXXX.XX.22 Premium warm white 2700 K ca. 1410 lm/m >80 19,2 W/m 75 mm 10/10 mm
XXXXX.XX.24 Premium neutral white 4000 K ca. 1512 lm/m >80 19,2 W/m 75 mm 10/10 mm
XXXXX.XX.26 Premium cool white 6300 K ca. 1656 lm/m >80 19,2 W/m 75 mm 10/10 mm
XXXXX.XX.28 Premium RGB ca. 445 lm/m - 16,6 W/m 100 mm 15/15 mm
XXXXX.XX.01 Standard warm white 2700 K ca. 1050 lm/m >80 9,6 W/m 100 mm 10/10 mm
XXXXX.XX.04 Standard neutral white 4000 K ca. 1200 lm/m >80 9,6 W/m 100 mm 10/10 mm
XXXXX.XX.02 Standard warm white 2700 K ca. 2100 lm/m >80 19,2 W/m 50 mm 10/10 mm
XXXXX.XX.05 Standard neutral white 4000 K ca. 2400 lm/m >80 19,2 W/m 50 mm 10/10 mm
XXXXX.XX.12 Standard blue 470 nm - 9,6 W/m 50 mm 10/10 mm
XXXXX.XX.13 Standard green 527 nm - 9,6 W/m 50 mm 10/10 mm
XXXXX.XX.14 Standard amber 590 nm - 9,6 W/m 50 mm 10/10 mm
XXXXX.XX.15 Standard red 625 nm - 9,6 W/m 50 mm 10/10 mm
XXXXX.XX.09 Standard RGBW, 3000 K 2 ca. 1120 lm/m - 19,2 W/m 100 mm 15/15 mm
Perfect illumination: addition beginning + n x cut + addition end
Art.-No. End caps Art.-No.
End caps Connection
62190A.50.XX Plastics XXXXX.XX.45 5 m
62190A.51.XX Metal XXXXX.XX.41 0,15 m
62190A.52.XX Metal with fixing lugs XXXXX.XX.42 0,15 m
B
IP 20IP 64IP 67
Ø 4 mm
32 mm
Ø 9 mm
2 x 0,25 mm²RGB 4 x 0,25 mm
1 The grouting increases the lighting colour value 2 Available open only with 5 m connection
Tel. 01372 888 455 | www.flairlight.co.uk
71
LED
Lin
ear
Ligh
ting
dot-spotMade in Germany
Accessories ► slimlux 19
Art.-No. Model Description Unit
95015 sl 19 hk 1 Mounting clip for sl 19 1 pair
95016 sl 19 hk 2 Mounting clip 45° for sl 19 1 pair
95017 sl 19 hk 3 Pivoting mounting clip for sl 19 1 pair
95041 sl 19 hk 4 Mounting for sl 19, extra strong 1 pair
95018 sl 19 mv Connector clip for sl 19 1 piece
Additional accessories from page ► 98
LED Linear Lighting slimlux 19
dot-spot72
LED Linear Lighting slimlux 19 VA, 1.4404 stainless steel 316L - NEW
LED
Lin
ear
Ligh
ting
▪ Line light for surface mounting, width 17.4mm, Height 19.7mm
▪
▪
▪ made to measure, with end caps, max. length 3 m
▪ further versions upon request
Fully potted clear or opaque , for outdoor use
For installation in the (ground ) floor , natural stone, concrete parts and in swimming pools
Art.-No. Model Design
Profile
62195.67.XX sl 19 VA 67 d ALU 24 V DC with diffuse full grouting 1
62195.672.XX sl 19 VA 67 k ALU 24 V DC with transparent full grouting 1
max. 3 m
13,4 mm
17,4 mm
19,7 mm
16,2 mm
A
Art.-No. Model CRI Watt
LED stripXXXXX.XX.21 Premium warm white 2700 K ca. 600 lm/m >80 9,6 W/m 100 mm 10/10 mm
XXXXX.XX.23 Premium neutral white 4000 K ca. 650 lm/m >80 9,6 W/m 100 mm 10/10 mm
XXXXX.XX.25 Premium cool white 6300 K ca. 670 lm/m >80 9,6 W/m 100 mm 10/10 mm
XXXXX.XX.22 Premium warm white 2700 K ca. 1410 lm/m >80 19,2 W/m 75 mm 10/10 mm
XXXXX.XX.24 Premium neutral white 4000 K ca. 1512 lm/m >80 19,2 W/m 75 mm 10/10 mm
XXXXX.XX.26 Premium cool white 6300 K ca. 1656 lm/m >80 19,2 W/m 75 mm 10/10 mm
XXXXX.XX.28 Premium RGB ca. 445 lm/m - 16,6 W/m 100 mm 15/15 mm
XXXXX.XX.01 Standard warm white 2700 K ca. 1050 lm/m >80 9,6 W/m 100 mm 10/10 mm
XXXXX.XX.04 Standard neutral white 4000 K ca. 1200 lm/m >80 9,6 W/m 100 mm 10/10 mm
XXXXX.XX.02 Standard warm white 2700 K ca. 2100 lm/m >80 19,2 W/m 50 mm 10/10 mm
XXXXX.XX.05 Standard neutral white 4000 K ca. 2400 lm/m >80 19,2 W/m 50 mm 10/10 mm
XXXXX.XX.12 Standard blue 470 nm - 9,6 W/m 50 mm 10/10 mm
XXXXX.XX.13 Standard green 527 nm - 9,6 W/m 50 mm 10/10 mm
XXXXX.XX.14 Standard amber 590 nm - 9,6 W/m 50 mm 10/10 mm
XXXXX.XX.15 Standard red 625 nm - 9,6 W/m 50 mm 10/10 mm
XXXXX.XX.09 Standard RGBW, 3000 K 2 ca. 1120 lm/m - 19,2 W/m 100 mm 15/15 mm
Perfect illumination: addition beginning + n x cut + addition end
Art.-No. End caps Art.-No.
End caps Connection
62190A.51.XX Stainless steel XXXXX.XX.45 5 m
XXXXX.XX.41 0,15 m
XXXXX.XX.42 0,15 m
B
Ø 4 mm
32 mm
Ø 9 mm
2 x 0,25 mm²RGB 4 x 0,25 mm
1 The grouting increases the lighting colour value
V4A316 L
2 Available open only with 5 m connection
Tel. 01372 888 455 | www.flairlight.co.uk
73
LED
Lin
ear
Ligh
ting
dot-spotMade in Germany
Accessories ► slimlux 19 VA
Art.-No. Model Description Unit
95042 sl 19 VA hk 1 Mounting clip for sl 19 VA 1 pair
Additional accessories from page ► 98
LED Linear Lighting slimlux 19 VA, stainless steel
dot-spot74
LED
Lin
ear
Ligh
ting
max. 5 m
18,4 mm
30 mm13,4 mm
15 mm
LED Linear Lighting slimlux 19 H
▪ Line light for surface mounting, invisible mounting, width 18.4 mm, height 30 mm
▪ homogenous illumination pattern
▪ made to measure, with end caps, max. length 5 m
▪ further versions upon request
ALU
Art.-No. Model Design
Profile
62192.20.XX sl 19 H 20 ALU 24 V DC with diffuse cover
62192.671.XX sl 19 H 64 TV ALU 24 V DC partially grouted, with diffuse cover
62192.67.XX sl 19 H 67 ALU 24 V DC with diffuse full grouting 1
AArt.-No. Model CRI Watt
LED stripXXXXX.XX.21 Premium warm white 2700 K ca. 600 lm/m >80 9,6 W/m 100 mm 10/10 mm
XXXXX.XX.23 Premium neutral white 4000 K ca. 650 lm/m >80 9,6 W/m 100 mm 10/10 mm
XXXXX.XX.25 Premium cool white 6300 K ca. 670 lm/m >80 9,6 W/m 100 mm 10/10 mm
XXXXX.XX.22 Premium warm white 2700 K ca. 1410 lm/m >80 19,2 W/m 75 mm 10/10 mm
XXXXX.XX.24 Premium neutral white 4000 K ca. 1512 lm/m >80 19,2 W/m 75 mm 10/10 mm
XXXXX.XX.26 Premium cool white 6300 K ca. 1656 lm/m >80 19,2 W/m 75 mm 10/10 mm
XXXXX.XX.28 Premium RGB ca. 445 lm/m - 16,6 W/m 100 mm 15/15 mm
XXXXX.XX.01 Standard warm white 2700 K ca. 1050 lm/m >80 9,6 W/m 100 mm 10/10 mm
XXXXX.XX.04 Standard neutral white 4000 K ca. 1200 lm/m >80 9,6 W/m 100 mm 10/10 mm
XXXXX.XX.02 Standard warm white 2700 K ca. 2100 lm/m >80 19,2 W/m 50 mm 10/10 mm
XXXXX.XX.05 Standard neutral white 4000 K ca. 2400 lm/m >80 19,2 W/m 50 mm 10/10 mm
XXXXX.XX.12 Standard blue 470 nm - 9,6 W/m 50 mm 10/10 mm
XXXXX.XX.13 Standard green 527 nm - 9,6 W/m 50 mm 10/10 mm
XXXXX.XX.14 Standard amber 590 nm - 9,6 W/m 50 mm 10/10 mm
XXXXX.XX.15 Standard red 625 nm - 9,6 W/m 50 mm 10/10 mm
XXXXX.XX.09 Standard RGBW, 3000 K 2 ca. 1120 lm/m - 19,2 W/m 100 mm 15/15 mm
Perfect illumination: addition beginning + n x cut + addition end
Art.-No. Connection and end caps
Connection and end caps
62192A.455 m5 m5 m
Metal end caps and standard packing, open cable
62192A.410,15 m0.15 m0,15 m
Metal end caps and standard packing, plug on one side
62192A.420,15 m0.15 m0,15 m
Metal end caps and standard packing, plug/socket
B
IP 20IP 64IP 67
Ø 4 mm
32 mm
Ø 9 mm
2 x 0,25 mm²RGB 4 x 0,25 mm
1 The grouting increases the lighting colour value 2 Available open only with 5 m connection
Tel. 01372 888 455 | www.flairlight.co.uk
75
dot-spotMade in Germany
LED
Lin
ear
Ligh
ting
LED Linear Lighting slimlux 19 H
Accessories ► slimlux 19 H
Art.-No. Model Description Unit
95019 sl 19 H bp Installation profi le for sl 19 1 m
95021 sl 19 H hs Mounting bracket, 5 cm, with screws 1 pair
95022 sl 19 dbf Suspension for ceiling mount 1 pair
Additional accessories from page ► 98
dot-spot76
LED Linear Lighting slimlux 19 K
LED
Lin
ear
Ligh
ting
▪ narrow line light for surface and integrated mounting, width with collar 35.2 mm, height 25 mm
▪ homogenous illumination pattern
▪ made to measure, with end caps, max. length 5 m
▪ further versions upon request
ALU
Art.-No. Model Design
Profile
62193.20.XX sl 19 K 20 ALU 24 V DC with diffuse cover
62193.671.XX sl 19 K 64 TV ALU 24 V DC partially grouted, with diffuse cover
62193.67.XX sl 19 K 67 ALU 24 V DC with diffuse full grouting 1
18,5 mm
max. 5 m
25 mm
15,2 mm
35,2 mm22,3 mm
Art.-No. Model CRI Watt
LED stripXXXXX.XX.21 Premium warm white 2700 K ca. 600 lm/m >80 9,6 W/m 100 mm 10/10 mm
XXXXX.XX.23 Premium neutral white 4000 K ca. 650 lm/m >80 9,6 W/m 100 mm 10/10 mm
XXXXX.XX.25 Premium cool white 6300 K ca. 670 lm/m >80 9,6 W/m 100 mm 10/10 mm
XXXXX.XX.22 Premium warm white 2700 K ca. 1410 lm/m >80 19,2 W/m 75 mm 10/10 mm
XXXXX.XX.24 Premium neutral white 4000 K ca. 1512 lm/m >80 19,2 W/m 75 mm 10/10 mm
XXXXX.XX.26 Premium cool white 6300 K ca. 1656 lm/m >80 19,2 W/m 75 mm 10/10 mm
XXXXX.XX.28 Premium RGB ca. 445 lm/m - 16,6 W/m 100 mm 15/15 mm
XXXXX.XX.01 Standard warm white 2700 K ca. 1050 lm/m >80 9,6 W/m 100 mm 10/10 mm
XXXXX.XX.04 Standard neutral white 4000 K ca. 1200 lm/m >80 9,6 W/m 100 mm 10/10 mm
XXXXX.XX.02 Standard warm white 2700 K ca. 2100 lm/m >80 19,2 W/m 50 mm 10/10 mm
XXXXX.XX.05 Standard neutral white 4000 K ca. 2400 lm/m >80 19,2 W/m 50 mm 10/10 mm
XXXXX.XX.12 Standard blue 470 nm - 9,6 W/m 50 mm 10/10 mm
XXXXX.XX.13 Standard green 527 nm - 9,6 W/m 50 mm 10/10 mm
XXXXX.XX.14 Standard amber 590 nm - 9,6 W/m 50 mm 10/10 mm
XXXXX.XX.15 Standard red 625 nm - 9,6 W/m 50 mm 10/10 mm
XXXXX.XX.09 Standard RGBW, 3000 K 2 ca. 1120 lm/m - 19,2 W/m 100 mm 15/15 mm
A
Perfect illumination: addition beginning + n x cut + addition end
Zubehör ▪ accessories ▪ accessoires ► slimlux 19 K
Art.-No. Model Description Unit
95024 sl 19 K mh Mounting clamp for dry wall construction mounting 1 piece
Art.-No. Connection and end caps
Connection and end caps
62193A.455 m5 m5 m
Metal end caps, with collar and standard packing, open cable
62193A.410,15 m0.15 m0,15 m
Metal end caps, with collar and standard packing, plug on one side
62193A.420,15 m0.15 m0,15 m
Metal end caps, with collar and standard packing, plug/socket
B
IP 20IP 64IP 67
Additional accessories from page ► 32 + 98
Ø 4 mm
32 mm
Ø 9 mm
2 x 0,25 mm²RGB 4 x 0,25 mm
1 The grouting increases the lighting colour value
2 Available open only with 5 m connection
Tel. 01372 888 455 | www.flairlight.co.uk
77
LED
Lin
ear
Ligh
ting
dot-spotMade in Germany
LED Linear Lighting slimlux 19 180°
▪ line light with 180° light emission, with invisible mounting clips, width 19 mm, height 20 mm
▪ homogenous illumination pattern (only with 180° diffuser)
▪ made to measure, with end caps, max. length 5 m
▪ further versions upon request
ALU
Art.-No. Model Design
Profile
69194.20.XX sl 19 180H 20 ALU 24 V DC with diffuse 180° cover
69194.21.XX sl 19 180F 20 ALU 24 V DC with transparent cover, fl at, IP 20
69194.67.XX sl 19 180F 67 ALU 24 V DC with transparent full grouting, fl at, IP 67 1
Art.-No. Model CRI Watt
LED strip XXXXX.XX.21 Premium warm white 2700 K ca. 600 lm/m >80 9,6 W/m 100 mm 10/10 mm
XXXXX.XX.23 Premium neutral white 4000 K ca. 650 lm/m >80 9,6 W/m 100 mm 10/10 mm
XXXXX.XX.25 Premium cool white 6300 K ca. 670 lm/m >80 9,6 W/m 100 mm 10/10 mm
XXXXX.XX.22 Premium warm white 2700 K ca. 1410 lm/m >80 19,2 W/m 75 mm 10/10 mm
XXXXX.XX.24 Premium neutral white 4000 K ca. 1512 lm/m >80 19,2 W/m 75 mm 10/10 mm
XXXXX.XX.26 Premium cool white 6300 K ca. 1656 lm/m >80 19,2 W/m 75 mm 10/10 mm
XXXXX.XX.28 Premium RGB ca. 445 lm/m - 16,6 W/m 100 mm 15/15 mm
XXXXX.XX.01 Standard warm white 2700 K ca. 1050 lm/m >80 9,6 W/m 100 mm 10/10 mm
XXXXX.XX.04 Standard neutral white 4000 K ca. 1200 lm/m >80 9,6 W/m 100 mm 10/10 mm
XXXXX.XX.02 Standard warm white 2700 K ca. 2100 lm/m >80 19,2 W/m 50 mm 10/10 mm
XXXXX.XX.05 Standard neutral white 4000 K ca. 2400 lm/m >80 19,2 W/m 50 mm 10/10 mm
XXXXX.XX.09 Standard RGBW, 3000 K 2 ca. 1120 lm/m - 19,2 W/m 100 mm 15/15 mm
A
16 mm
19 mm
14 mm8,6 mm
10,2 mm
12 mm
max. 5 m
IP 20IP 67
Perfect illumination: addition beginning + n x cut + addition end
Art.-No. Connection and end caps
Connection and end caps
69195.455 m5 m5 m
Metal end caps and standard packing, open cable
69195.410,15 m0.15 m0,15 m
Metal end caps and standard packing, plug on one side
69195.420,15 m0.15 m0,15 m
Metal end caps and standard packing, plug/socket
B
Accessories at page ► 72
Ø 4 mm
32 mm
Ø 9 mm
2 x 0,25 mm²RGB 4 x 0,25 mm
1 The grouting increases the lighting colour value 2 Available open only with 5 m connection
dot-spot78
LED
Lin
ear
Ligh
ting
Accessories ► slimlux 180°
Art.-No. Model Description Unit
95040 sl 19 180° mh Stainless steel mounting clip 1 pair
95032 sl 180° hcp Plastic mounting clip 1 pair
95033 sl 180° eh Plastic mounting clip, for corner installation 1 pair
95034 sl 180° smh Super magnet support 1 piece
95035 sl 180° pv Profi le connector 1 piece
95036 sl 180° ev Corner connector 1 piece
95022 sl 19 dbf Suspension for ceiling mounting 1 pair
Additional accessories from page ► 98
LED Linear Lighting slimlux 19 180° complete light
▪ line light with 180° light emission, homogenous illumination pattern, width 19 mm, height 20 mm
▪ ready-made luminaire e.g. as a replacement of fluorescent lights, lighting color 2700 K
▪ complete with external power supply and mounting clips, connection cable 5 m
ALU
Art.-No. Model Length Watt
slimlux 19 180° Complete light
69194.60 sl 19 180° L60 ALU 60 cm 11.2 W 230 V 1200 lm 5 m
69194.120 sl 19 180° L120 ALU 120 cm 23,5 W 230 V 2400 lm 5 m
69194.150 sl 19 180° L150 ALU 150 cm 29,4 W 230 V 3000 lm 5 m
69194.200 sl 19 180° L200 ALU 200 cm 39,2 W 230 V 4000 lm 5 m
LED Linear Lighting slimlux 19 180°
230 VAC
Tel. 01372 888 455 | www.flairlight.co.uk
79
LED
Lin
ear
Ligh
ting
dot-spotMade in Germany
LED Linear Lighting slimlux eck 45°
▪ line light for corner installation, width 18.81 mm x height 18.81 mm
▪ almost homogenous illumination pattern with diffuse cover
▪ made to measure, with end caps, max. length 5 m
▪ further versions upon request
ALU
Art.-No. Model Design
Profile
62450.20.XX sl 45 eck 20 ALU 24 V DC with diffuse cover, IP 20
62450.21.XX sl 45 eck 20 ALU 24 V DC with transparent cover, IP 20
62450.67.XX sl 45 eck 67 ALU 24 V DC with transparent full grouting IP 67 1
max. 5 m
15 mm
23,71 mm
8 m
m16
,66
mm
18,81 mm
AArt.-No. Model CRI Watt
LED strip XXXXX.XX.21 Premium warm white 2700 K ca. 600 lm/m >80 9,6 W/m 100 mm 10/10 mm
XXXXX.XX.23 Premium neutral white 4000 K ca. 650 lm/m >80 9,6 W/m 100 mm 10/10 mm
XXXXX.XX.25 Premium cool white 6300 K ca. 670 lm/m >80 9,6 W/m 100 mm 10/10 mm
XXXXX.XX.22 Premium warm white 2700 K ca. 1410 lm/m >80 19,2 W/m 75 mm 10/10 mm
XXXXX.XX.24 Premium neutral white 4000 K ca. 1512 lm/m >80 19,2 W/m 75 mm 10/10 mm
XXXXX.XX.26 Premium cool white 6300 K ca. 1656 lm/m >80 19,2 W/m 75 mm 10/10 mm
XXXXX.XX.28 Premium RGB ca. 445 lm/m - 16,6 W/m 100 mm 15/15 mm
XXXXX.XX.01 Standard warm white 2700 K ca. 1050 lm/m >80 9,6 W/m 100 mm 10/10 mm
XXXXX.XX.04 Standard neutral white 4000 K ca. 1200 lm/m >80 9,6 W/m 100 mm 10/10 mm
XXXXX.XX.02 Standard warm white 2700 K ca. 2100 lm/m >80 19,2 W/m 50 mm 10/10 mm
XXXXX.XX.05 Standard neutral white 4000 K ca. 2400 lm/m >80 19,2 W/m 50 mm 10/10 mm
XXXXX.XX.09 Standard RGBW, 3000 K 2 ca. 1120 lm/m - 19,2 W/m 100 mm 15/15 mm
Accessories ► slimlux eck 45°
Art.-No. Model Description Unit
95071 sl eck 45 mc Mounting clip for sl 45 eck 1 pair
Additional accessories from page ► 98
Perfect illumination: addition beginning + n x cut + addition end
Art.-No. Connection and end caps
Connection and end caps
62451.455 m5 m5 m
Metal end caps and standard packing, open cable
62451.410,15 m0.15 m0,15 m
Metal end caps and standard packing, plug on one side
62451.420,15 m0.15 m0,15 m
Metal end caps and standard packing, plug/socket
B
IP 20IP 67
Ø 4 mm
32 mm
Ø 9 mm
2 x 0,25 mm²RGB 4 x 0,25 mm
1 The grouting increases the lighting colour value 2 Available open only with 5 m connection
dot-spot80
LED strip slimlux 30x30
LED
Lin
ear
Ligh
ting
▪ elegant line light, 30 x 30 mm for general illumination
▪ homogenous illumination pattern
▪ high light output thanks to lateral reflectors
▪ with hidden mounting clips
▪ made to measure, with end caps, max. length 3 m
▪ further versions upon request
ALU
30 mm23,8 mm
30 mm
27,6 mm
10,2 mm
max. 3 m
Art.-No. Model Design
Profile
62300.XX sl 30x30 ALU 24 V DC with diffuse cover, IP 20
AArt.-No. Model CRI Watt
LED strip XXXXX.XX.22 Premium warm white 2700 K ca. 1410 lm/m >80 19,2 W/m 75 mm 10/10 mm
XXXXX.XX.24 Premium neutral white 4000 K ca. 1512 lm/m >80 19,2 W/m 75 mm 10/10 mm
XXXXX.XX.26 Premium cool white 6300 K ca. 1656 lm/m >80 19,2 W/m 75 mm 10/10 mm
XXXXX.XX.28 Premium RGB ca. 445 lm/m - 16,6 W/m 100 mm 15/15 mm
XXXXX.XX.02 Standard warm white 2700 K ca. 2100 lm/m >80 19,2 W/m 50 mm 10/10 mm
XXXXX.XX.05 Standard neutral white 4000 K ca. 2400 lm/m >80 19,2 W/m 50 mm 10/10 mm
XXXXX.XX.09 Standard RGBW, 3000 K 1 ca. 1120 lm/m - 19,2 W/m 100 mm 15/15 mm
Perfect illumination: addition beginning + n x cut + addition end
Art.-No. Connection and end caps
Connection and end caps
62301.455 m5 m5 m
Metal end caps and standard packing, open cable
62301.410,15 m0.15 m0,15 m
Metal end caps and standard packing, plug on one side
62301.420,15 m0.15 m0,15 m
Metal end caps and standard packing, plug/socket
B
Ø 4 mm
32 mm
Ø 9 mm
2 x 0,25 mm²RGB 4 x 0,25 mm
Accessories ► slimlux eck 45°
Art.-No. Model Description Unit
95040 sl 19 180 mh Mounting clip for sl 30 1 pair
95035 sl 180° pv Profi le connector 1 piece
95036 sl 180° ev Corner connector 1 piece
95022 sl 19 dbf Suspension for ceiling mounting 1 pair
Additional accessories from page ► 98
Available open only with 5 m connection
Tel. 01372 888 455 | www.flairlight.co.uk
81
LED
Lin
ear
Ligh
ting
dot-spotMade in Germany
LED strip slimlux 30x30 complete light
ALU
▪ elegant light bar, 30 x 30 mm, homogenous illumination pattern
▪ ready-made luminaire e.g. as a replacement of fluorescent lights, lighting color 2700 K
▪ complete with external power supply and mounting clips, connection cable 5 m
Art.-No. Model Length Watt
slimlux 30x30 ▪ Complete light
62300.60 sl 30 L60 ALU 60 cm 11.2 W 24 V DC 1200 lm 5 m
62300.120 sl 30 L120 ALU 120 cm 23,5 W 24 V DC 2400 lm 5 m
62300.150 sl 30 L150 ALU 150 cm 29,4 W 24 V DC 3000 lm 5 m
62300.200 sl 30 L200 ALU 200 cm 39,2 W 24 V DC 4000 lm 5 m
230 VAC
dot-spot82
LED strip slimlux 10 flex 6 W/m
LED
Lin
ear
Ligh
ting
▪ flexible line light, 10 x 18.5 mm, vertically flexible (curved), minimum bending radius only 15 cm
▪ homogenous illumination pattern, absolutely straight light output surface
▪ water-resistant , protected against UV radiation, wear and chemicals
▪ cable outlet at the back or laterally possible thanks to seamless, widely shadow-free arrangement
▪ available in fixed length or made to measure
Standard length
Made to measure :Standardized size 84 mm x 1-71 units, + 20 mm for connection = possible lengths (min. 104 mm, max. 5,984 mm)
Attention: 25 % surcharge in case of lengths < 1 m
18,5 mm
10 mm
LED stripe
bending direction
flexible full grouting
R150
10 mm
bending radius
Ø 4 mm
32 mm
Ø 9 mm
2 x 0,25 mm²
Art.-No. Model Watt Length
Fixed length 64106.09.XX.XX sl 10 fl ex 6 6 W/m 24 V DC 950 mm
64106.24.XX.XX sl 10 fl ex 6 6 W/m 24 V DC 2456 mm
64106.39.XX.XX sl 10 fl ex 6 6 W/m 24 V DC 3968 mm
Art.-No. CRI Art.-No.
Lighting color Connection XXXXX.30.XX warm white 2600 K 547 lm/m >80 XXXXX.XX.45 3 m
XXXXX.31.XX warm white 3400 K 547 lm/m >80 XXXXX.XX.41 0,15 m
XXXXX.32.XX neutral white 4150 K 547 lm/m >80 XXXXX.XX.42 0,15 m
XXXXX.33.XX cool white 7100 K 547 lm/m >80
XXXXX.34.XX red 624 nm 213 lm/m -
XXXXX.35.XX green 525 nm 419 lm/m -
XXXXX.36.XX blue 470 nm 92 lm/m -
XXXXX.37.XX amber 593 nm 227 lm/m -
Item no. A x total length of all light bars
Art.-No. CRI
Packed length 64106.30 warm white 2600 K 547 lm/m >80 84 mm 10/10 mm
64106.31 warm white 3400 K 547 lm/m >80 84 mm 10/10 mm
64106.32 neutral white 4150 K 547 lm/m >80 84 mm 10/10 mm
64106.33 cool white 7100 K 547 lm/m >80 84 mm 10/10 mm
64106.34 red 624 nm 213 lm/m - 84 mm 10/10 mm
64106.35 green 525 nm 419 lm/m - 84 mm 10/10 mm
64106.36 blue 470 nm 92 lm/m - 84 mm 10/10 mm
64106.37 amber 593 nm 227 lm/m - 84 mm 10/10 mm
A
Accessories ► slimlux 10 flex 6 W/m
Art.-No. Model Description Unit
95200 Sl10 fl ex mp Installation profi le Aluminum, rigid, for sl 10 1 m
Item no. B x number of light bars
Art.-No.
Connection 64107.45 3 m
64107.41 0,15 m
64107.42 0,15 m
B
additional accessories from page ► 98
Tel. 01372 888 455 | www.flairlight.co.ukTel. 01372 888 455 | www.flairlight.co.uk
Tel. 01372 888 455 | www.flairlight.co.uk
83
LED
Lin
ear
Ligh
ting
dot-spotMade in Germany
LED strip slimlux 10 flex 8 W/m
▪ flexible line light, 10 x 18.5 mm, vertically flexible (curved), minimum bending radius only 15 cm
▪ homogenous illumination pattern, absolutely straight light output surface
▪ water-resistant , protected against UV radiation, wear and chemicals
▪ cable outlet at the back or laterally possible thanks to seamless, widely shadow-free arrangement
▪ available in fixed length or made to measure
Standard length
Made to measure :Standardized size 60 mm x 1-124 units, + 20 mm for connection = possible lengths (min. 80 mm, max. 7460 mm)
Attention: 25 % surcharge in case of lengths < 1 m
R150
10 mm
bending radius
Art.-No. Model Watt Length
Fixed length64108.09.XX.XX sl 10 fl ex 8 8,3 W/m 24 V DC 980 mm
64108.24.XX.XX sl 10 fl ex 8 8,3 W/m 24 V DC 2420 mm
64108.39.XX.XX sl 10 fl ex 8 8,3 W/m 24 V DC 3980 mm
Art.-No. CRI Art.-No.
Lighting color ConnectionXXXXX.30.XX warm white 2600 K 770 lm/m >80 XXXXX.XX.45 3 m
XXXXX.31.XX warm white 3400 K 770 lm/m >80 XXXXX.XX.41 0,15 m
XXXXX.32.XX neutral white 4150 K 770 lm/m >80 XXXXX.XX.42 0,15 m
XXXXX.33.XX cool white 7100 K 770 lm/m >80
XXXXX.34.XX red 624 nm 300 lm/m -
XXXXX.35.XX green 525 nm 590 lm/m -
XXXXX.36.XX blue 470 nm 130 lm/m -
XXXXX.37.XX amber 593 nm 320 lm/m -
18,5 mm
10 mm
LED stripe
bending direction
flexible full grouting
Ø 4 mm
32 mm
Ø 9 mm
2 x 0,25 mm²
Art.-No. CRI
Packed length 64108.30 warm white 2600 K 770 lm/m >80 60 mm 10/10 mm
64108.31 warm white 3400 K 770 lm/m >80 60 mm 10/10 mm
64108.32 neutral white 4150 K 770 lm/m >80 60 mm 10/10 mm
64108.33 cool white 7100 K 770 lm/m >80 60 mm 10/10 mm
64108.34 red 624 nm 300 lm/m - 60 mm 10/10 mm
64108.35 green 525 nm 590 lm/m - 60 mm 10/10 mm
64108.36 blue 470 nm 130 lm/m - 60 mm 10/10 mm
64108.37 amber 593 nm 320 lm/m - 60 mm 10/10 mm
Item no. A x total length of all light bars
A
Art.-No.
Connection
64109.45 3 m
64109.41 0,15 m
64109.42 0,15 m
Accessories ► slimlux 10 flex 8 W/m
Art.-No. Model Description Unit
95200 Sl10 fl ex mp Installation profi le Aluminum, rigid, for sl 10 fl ex 1 m
Item no. B x number of light bars B
Additional accessories from page ► 98
dot-spot84
LED strip slimlux 10 flex 18 W/m
LED
Lin
ear L
ight
ing
Made to measure:Standardized size 90 mm x 1-55 units, + 20 mm for connection = possible lengths (min. 110 mm, max. 4970 mm)
Attention: 25 % surcharge in case of lengths < 1 m
R150
10 mm
bending radius
Art.-No. Model Watt Length
Fixed length 64110.10.XX.XX sl 10 fl ex 18 uni 17,9 W/m 24 V DC 1010 mm
64110.24.XX.XX sl 10 fl ex 18 uni 17,9 W/m 24 V DC 2450 mm
64110.39.XX.XX sl 10 fl ex 18 uni 17,9 W/m 24 V DC 3980 mm
64110.10.99.XX.XX sl 10 fl ex 18 RGB 16,6 w/m 24 V DC 1010 mm
64110.24.99.XX.XX sl 10 fl ex 18 RGB 16,6 W/m 24 V DC 2450 mm
64110.39.99.XX.XX sl 10 fl ex 18 RGB 16,6 W/m 24 V DC 3980 mm
Art.-No. CRI Art.-No.
Lighting color Connection XXXXX.31.XX warm white 3400 K 1716 lm/m >80 XXXXX.XX.45 3 m
XXXXX.32.XX neutral white 4150 K 1716 lm/m >80 XXXXX.XX.41 0,15 m
XXXXX.33.XX cool white 7100 K 1716 lm/m >80 XXXXX.XX.42 0,15 m
RGB 594 lm/m -
18,5 mm
10 mm
LED stripe
bending direction
flexible full grouting
Item no. A x total length of all light bars
Art.-No. CRI
Packed length 64110.31 warm white 3400 K 1716 lm/m >80 90 mm 10/10 mm
64110.32 neutral white 4150 K 1716 lm/m >80 90 mm 10/10 mm
64110.33 cool white 7100 K 1716 lm/m >80 90 mm 10/10 mm
64110.99 RGB 594 lm/m - 90 mm 10/10 mm
A
Art.-No.
Connection 64111.45 3 m
64111.41 0,15 m
64111.42 0,15 m
Accessories ► slimlux 10 flex 18 W/m
Art.-No. Model Description Unit
95200 Sl10 fl ex mp Installation profi le Aluminum, rigid, for sl 10 1 m
Additional accessories from page ► 98
Item no. B x number of light bars B
Ø 4 mm
32 mm
Ø 9 mm
2 x 0,25 mm²RGB 4 x 0,25 mm
▪ flexible line light, 10 x 18.5 mm, vertically flexible (curved), minimum bending radius only 15 cm
▪ homogenous illumination pattern, absolutely straight light output surface
▪ water-resistant , protected against UV radiation, wear and chemicals
▪ cable outlet at the back or laterally possible thanks to seamless, widely shadow-free arrangement
▪ available in fixed length or made to measure
Standard length
Tel. 01372 888 455 | www.flairlight.co.uk
85
dot-spotMade in Germany
LED strip slimlux 13,5 flex 8 W/m B
▪ flexible line light, 13.5 x 13.5 mm, horizontally flexible (undulated), minimum bending radius only 20 cm
▪ homogenous illumination pattern, absolutely straight light output surface
▪ water-resistant , protected against UV radiation, wear and chemicals
▪ cable outlet at the back or laterally possible thanks to seamless, widely shadow-free arrangement
▪ available in fixed length or made to measure
Standard length
LED
Lic
htlin
ien ▪ L
ED L
inea
r Lig
htin
g ▪ L
igne
s lu
min
euse
s LE
D
Art.-No. Model Watt Length
Fixed length 64135.09.XX.XX sl 13,5 fl ex 8 8,3 W/m 24 V DC 980 mm
64135.24.XX.XX sl 13,5 fl ex 8 8,3 W/m 24 V DC 2420 mm
64135.39.XX.XX sl 13,5 fl ex 8 8,3 W/m 24 V DC 3980 mm
Art.-No. CRI Art.-No.
Lighting color Connection XXXXX.30.XX warm white 2600 K 770 lm/m >80 XXXXX.XX.45 3 m
XXXXX.31.XX warm white 3400 K 770 lm/m >80 XXXXX.XX.41 0,15 m
XXXXX.32.XX neutral white 4150 K 770 lm/m >80 XXXXX.XX.42 0,15 m
XXXXX.33.XX cool white 7100 K 770 lm/m >80
XXXXX.34.XX red 624 nm 300 lm/m -
XXXXX.35.XX green 525 nm 590 lm/m -
XXXXX.36.XX blue 470 nm 130 lm/m -
XXXXX.37.XX amber 593 nm 320 lm/m -
Made to measure:Standardized size 60 mm x 1-124 units, + 20 mm for connection = possible lengths (min. 80 mm, max. 7460 mm)
Attention: 25 % surcharge in case of lengths < 1 m
Art.-No. CRI
Packed length 64135.30 warm white 2600 K 770 lm/m >80 60 mm 10/10 mm
64135.31 warm white 3400 K 770 lm/m >80 60 mm 10/10 mm
64135.32 neutral white 4150 K 770 lm/m >80 60 mm 10/10 mm
64135.33 cool white 7100 K 770 lm/m >80 60 mm 10/10 mm
64135.34 red 624 nm 300 lm/m - 60 mm 10/10 mm
64135.35 green 525 nm 590 lm/m - 60 mm 10/10 mm
64135.36 blue 470 nm 130 lm/m - 60 mm 10/10 mm
64135.37 amber 593 nm 320 lm/m - 60 mm 10/10 mm
Item no. A x total length of all light bars A
Accessories► slimlux 13,5 flex 8 W/m
Art.-No. Model Description Unit
95201 Sl 13,5 fl ex mp Installation profi le Aluminum, rigid, for sl 13,5 fl ex 1 m
Art.-No.
Connection64136.45 3 m
64136.41 0,15 m
64136.42 0,15 m
Item no. B x number of light bars B
13,5 mm
13,5 mm
LED stripe
bending direction flexible full grouting
R200
13,5 mm
bending radius
Ø 4 mm
32 mm
Ø 9 mm
2 x 0,25 mm²
Additional accessories from page ► 98
dot-spot86
LED strip slimlux 17,5 flex 18 W/m
LED
Lin
ear
Ligh
ting
▪ flexible line light, 17.5 x 17.5 mm, horizontally flexible (undulated), minimum bending radius only 20 cm
▪ homogenous illumination pattern, absolutely straight light output surface
▪ water-resistant , protected against UV radiation, wear and chemicals
▪ cable outlet at the back or laterally possible thanks to seamless, widely shadow-free arrangement
▪ available in fixed length or made to measure
Standard length
R200
17,5 mm
bending radius
Made to measure :Standardized size 90 mm x 1-55 units, + 20 mm for connection = possible lengths (min. 110 mm, max. 4970 mm)
Attention: 25 % surcharge in case of lengths < 1 m
Art.-No. Model Watt Length
Fixed length64175.10.XX.XX sl 17,5 fl ex 18 uni 17,9 W/m 24 V DC 1010 mm
64175.24.XX.XX sl 17,5 fl ex 18 uni 17,9 W/m 24 V DC 2450 mm
64175.39.XX.XX sl 17,5 fl ex 18 uni 17,9 W/m 24 V DC 3980 mm
64175.10.99.XX.XX sl 17,5 fl ex 18 RGB 16,6 w/m 24 V DC 1010 mm
64175.24.99.XX.XX sl 17,5 fl ex 18 RGB 16,6 W/m 24 V DC 2450 mm
64175.39.99.XX.XX sl 17,5 fl ex 18 RGB 16,6 W/m 24 V DC 3980 mm
Art.-No. CRI Art.-No.
Lighting color ConnectionXXXXX.31.XX warm white 3400 K 1716 lm/m >80 XXXXX.XX.45 3 m
XXXXX.32.XX neutral white 4150 K 1716 lm/m >80 XXXXX.XX.41 0,15 m
XXXXX.33.XX cool white 7100 K 1716 lm/m >80 XXXXX.XX.42 0,15 m
RGB 594 lm/m -
17,5 mm
17,5 mm
LED stripe
bending direction flexible full grouting
Art.-No. CRI
Packed length 64175.31 warm white 3400 K 1716 lm/m >80 90 mm 10/10 mm
64175.32 neutral white 4150 K 1716 lm/m >80 90 mm 10/10 mm
64175.33 cool white 7100 K 1716 lm/m >80 90 mm 10/10 mm
64175.99 RGB 594 lm/m - 90 mm 10/10 mm
Item no. A x total length of all light bars
A
Accessories ► slimlux 17,5 flex 18 W/m
Art.-No. Model Description Unit
95202 Sl 17,5 fl ex mp Installation profi le Aluminum, rigid, for sl 17,5 1 m
Additional accessories from page ► 98
Art.-No.
Connection64176.45 3 m
64176.41 0,15 m
64176.42 0,15 m
Item no. B x number of light bars B
Ø 4 mm
32 mm
Ø 9 mm
2 x 0,25 mm²RGB 4 x 0,25 mm
Tel. 01372 888 455 | www.flairlight.co.uk
Tel. 01372 888 455 | www.flairlight.co.uk
87
LED
Lin
ear
Ligh
ting
dot-spotMade in Germany
LED strip slimlux 18/30 od, standard length
▪ Line light, 18 x 35 mm or 30 x 35 mm for outdoor use
▪ robust design, waterproof, resistant to UV radiation and chemicals
▪ Outdoor installation in floors and facades, matching installation frames for any mounting situation available
▪ cable outlet at the back or laterally possible thanks to seamless, widely shadow-free arrangement
▪ homogenous illumination pattern
▪ further versions upon request
Art.-No. Model Length
Fixed length63018.05.XX.XX.XX sl 18 PMMA / 316L 24 V DC 530 mm
63018.09.XX.XX.XX sl 18 PMMA / 316L 24 V DC 930 mm
63018.19.XX.XX.XX sl 18 PMMA / 316L 24 V DC 1930 mm
63030.05.XX.XX.XX sl 30 PMMA / 316L 24 V DC 530 mm
63030.09.XX.XX.XX sl 30 PMMA / 316L 24 V DC 930 mm
63030.19.XX.XX.XX sl 30 PMMA / 316L 24 V DC 1930 mm
63018.05.99.XX.XX.XX sl 18 RGB PMMA / 316L 24 V DC 530 mm
63018.09.99.XX.XX.XX sl 18 RGB PMMA / 316L 24 V DC 930 mm
63018.19.99.XX.XX.XX sl 18 RGB PMMA / 316L 24 V DC 1930 mm
63030.05.99.XX.XX.XX sl 30 RGB PMMA / 316L 24 V DC 530 mm
63030.09.99.XX.XX.XX sl 30 RGB PMMA / 316L 24 V DC 930 mm
63030.19.99.XX.XX.XX sl 30 RGB PMMA / 316L 24 V DC 1930 mm
Stainless steel installation profi le ► sl 18/30 od
Art.-No. Model Description Unit
95101.5395101.9395101.193
W sl 18 530W sl 18 930W sl 18 1930
Wall installation profile ► sl 18 od, V4A Wall installation profile ► sl 18 od, V4A Wall installation profile ► sl 18 od, V4A
530 mm930 mm1930 mm
95102.5395102.9395102.193
B sl 18 530B sl 18 930B sl 18 1930
Floor installation profile ► sl 18 od, V4A Floor installation profile ► sl 18 od, V4A Floor installation profile ► sl 18 od, V4A
530 mm930 mm1930 mm
95111.5395111.9395111.193
W sl 30 530W sl 30 930W sl 30 1930
Wall installation profile ► sl 30 od, V4A Wall installation profile ► sl 30 od, V4A Wall installation profile ► sl 30 od, V4A
530 mm930 mm1930 mm
95112.5395112.9395112.193
B sl 30 530B sl 30 930B sl 30 1930
Floor installation profile ► sl 30 od, V4A Floor installation profile ► sl 30 od, V4A Floor installation profile ► sl 30 od, V4A
530 mm930 mm1930 mm
Additional accessories from page ► 98 Dimensional drawing on page ► 89
Art.-No. Watt CRI Art.-No. Art.-No. Option
Lighting color Connection Option
XXXXX.31.XX.XX ww 3000 K 420 lm/m 9,6 W/m >80 XXXXX.XX.45.XX 5 m XXXXX.XX.XX.00
XXXXX.32.XX.XX nw 4000 K 450 lm/m 9,6 W/m >80 XXXXX.XX.41.XX 0,15 m XXXXX.XX.XX.01
XXXXX.33.XX.XX cw 6800 K 480 lm/m 9,6 W/m >80 XXXXX.XX.42.XX 0,15 m
XXXXX.34.XX.XX r 624 nm 80 lm/m 7,4 W/m -
XXXXX.35.XX.XX g 525 nm 180 lm/m 7,4 W/m -
XXXXX.36.XX.XX b 470 nm 30 lm/m 7,4 W/m -
XXXXX.37.XX.XX a 593 nm 130 lm/m 7,4 W/m -
RGB 473 lm/m 16,6 W/m -
35 mm25 mm
18 mm
Acrylic solid material
LED stripe
35 mm25 mm LED stripe
30 mm
Acrylic solid material
slimlux 18 od
slimlux 30 od
V4A316 L
Ø 4 mm
32 mm
Ø 9 mm
2 x 0,25 mm²RGB 4 x 0,25 mm
dot-spot88
LED
Lin
ear
Ligh
ting
LED strip slimlux 18/30 od, made to measure
▪ Line light, 18 x 35 mm or 30 x 35 mm for outdoor use
▪ robust design, waterproof, resistant to UV radiation and chemicals
▪ Outdoor installation in floors and facades, matching installation frames for any mounting situation available
▪ cable outlet at the back or laterally possible thanks to seamless, widely shadow-free arrangement
▪ homogenous illumination pattern
▪ further versions upon request
Made to measure :Maximum single length ► 1980 mm
Art.-No. Model Design
Profile63018.00.XX sl 18 standard 24 V DC sl 18 ► Installation profi le
63018.01.XX sl 18 standard 24 V DC sl 18 ► Mounting tabs
63030.00.XX sl 30 standard 24 V DC sl 30 ► Installation profi le
63030.01.XX sl 30 standard 24 V DC sl 30 ► Mounting tabs
Art.-No. Watt CRI
Packed length XXXXX.31 warm white 3000 K 420 lm/m 9,6 W/m >80 50 mm 15/15 mm
XXXXX.32 neutral white 4000 K 450 lm/m 9,6 W/m >80 50 mm 15/15 mm
XXXXX.33 cool white 6800 K 480 lm/m 9,6 W/m >80 50 mm 15/15 mm
XXXXX.34 red 624 nm 80 lm/m 7,4 W/m - 75 mm 15/15 mm
XXXXX.35 green 525 nm 180 lm/m 7,4 W/m - 75 mm 15/15 mm
XXXXX.36 blue 470 nm 30 lm/m 7,4 W/m - 75 mm 15/15 mm
XXXXX.37 amber 593 nm 130 lm/m 7,4 W/m - 75 mm 15/15 mm
XXXXX.99 RGB 473 lm/m 16,6 W/m - 100 mm 15/15 mm
Stainless steel installation profi le ► sl 18/30 od
Art.-No. Model Description
95101 W sl 18Wall installation profile ► sl 18 od, V4A
95102 B sl 18Floor installation profile ► sl 18 od, V4A
95111 W sl 30Wall installation profile ► sl 30 od, V4A
95112 B sl 30Floor installation profile ► sl 30 od, V4A
96500 GEHR Surcharge, mitre cut for od light bars
Additional accessories from page ► 98 Dimensional drawing on page ► 89
Art.-No.
Connection 63031.45 3 m
63031.41 0,15 m
63031.42 0,15 m
35 mm25 mm
18 mm
Acrylic solid material
LED stripe
35 mm25 mm LED stripe
30 mm
Acrylic solid material
slimlux 18 od
slimlux 30 od
max. 1980 mm
Item no. B x number of light bars
Item no. A x total length of all light bars A
B
Ø 4 mm
32 mm
Ø 9 mm
2 x 0,25 mm²RGB 4 x 0,25 mm
With optional mounting tabs
Tel. 01372 888 455 | www.flairlight.co.uk
89
LED
Lin
ear
Ligh
ting
dot-spotMade in Germany
Stainless steel installation profile for slimlux 18/30 od
Floor installation profile
21 mm18 mm
75 mmØ 8,5 mm
25 mm 46 mm
80 mm
L
33 mm30 mm
87 mm
46 mm
80 mm
slimlux 18 od slimlux 30 od
Wall installation profile
L
slimlux 18 od
15
50
slimlux 30 od
15
50
"Tübinger Carré", Stuttgart
"Reblandhalle", Neckarwestheim
LED Handrail Lighting
Elegant and innovative: The dot-spot handrail lighting for grooved tubes by DAIDALOS®, 48 mm in diameteroffers extra safety. Depending on the lighting requirements, the dot-spot handrail lighting can be equipped different LED stripes. With that many various projects can be realized, be it effect lighting or total illumination of staircases and paths. The dot-spot handrail lighting always provides a noble, homogenous, pointless light pattern
for a perfect illumination. The shock-resistant PMMA cover perfectly fi ts into the grooved tubes by DAIDALOS®.When building a handrail you can use all standard DAIDALOS® accesso-ries. Thanks to the perfect integration ofthe water-sealed LEDs into the handrail the system can also be used in public spaces and outdoors.
dot-spot92
LED
Han
drai
l Lig
htin
g
LED Technology
Bracket for cable laying
Stainless steel retaining bracket
Homogenous light output
Daidalos® grooved tube, 48.3 mm
PMMA LED cover profi le
Tel. 01372 888 455 | www.flairlight.co.uk
93
dot-spotMade in Germany
LED
Han
drai
l Lig
htin
g
LED Handrail Lighting
▪ LED set for handrail lighting for DAIDALOS® grooved tubes, 48.3 mm
▪ set consisting of diffuse PMMA cover, retaining clips and LED stripe
▪ assembling service included in the price: the LED stripes are manufactured and made to measure according to the plan an
equipped with connection cables; further LED stripes upon request
Supplier of the matching grooved tube and accessories ▪
ROSTFREI EDELSTAHL CONSULTINGREC PRODUKT + SERVICE GmbHSpitalwaldstraße 1591126 Schwabach / Germany phone: +49 (0)9122-9395-0fax: +49 (0)9122-9395-21email: info@rostfrei.de
Art.-No. Model
LED Handrail Lighting 70020.XX IP 20, indoor 24 V DC
70067.XX IP 67, outdoor 24 V DC
Art.-No. Type Watt CRI
LED stripeXXXXX.21 Premium warm white 2700 K 9,6 W/m ca. 600 lm/m >80
XXXXX.23 Premium neutral white 4000 K 9,6 W/m ca. 650 lm/m >80
XXXXX.25 Premium cool white 6300 K 9,6 W/m ca. 670 lm/m >80
XXXXX.22 Premium warm white 2700 K 19,2 W/m ca. 1410 lm/m >80
XXXXX.24 Premium neutral white 4000 K 19,2 W/m ca. 1512 lm/m >80
XXXXX.26 Premium cool white 6300 K 19,2 W/m ca. 1656 lm/m >80
XXXXX.28 Premium RGB 16,6 W/m ca. 445 lm/m -
XXXXX.01 Standard warm white 2700 K 9,6 W/m ca. 1050 lm/m >80
XXXXX.04 Standard neutral white 4500 K 9,6 W/m ca. 1200 lm/m >80
XXXXX.02 Standard warm white 2700 K 19,2 W/m ca. 2100 lm/m >80
XXXXX.05 Standard neutral white 4500 K 19,2 W/m ca. 2400 lm/m >80
XXXXX.09 Standard RGBW, 3000 K 19,2 W/m ca. 1120 lm/m -
IP 20IP 67
Ø 5 mm
2 x 0,5 mm²RGB 4 x 0,25 mm²RGBW 5 x 0,25 mm²
▪
dot-spot94
RIG
ILU
X® L
ED li
ne li
ghts
for
dryw
all c
onst
ruct
ion
RIGILUX® LED line lights for drywall construction7RIGILUX®, the innovative light system for drywall construc-tion opens up completely new design possibilitieswhen it comes to innovative illumination.
The RIGILUX® system consists of prefabricated plaster-board mouldings in which the LED line lights or lights areintegrated. The installation of the lighting elements is very easy. The lights are securely fi xed in the ducts by magnet holders. The system is ready-to-plug-in and can therefore be installed by the drywall constructor without any elec-trical training.
Be it decorative accent lighting or general illumination, the RIGILUX® system makes it possible to perfectlysolve a number of illumination tasks. The advantages are obvious:
▪ enormous time savings in designing LED illumination in drywall construction
▪ completely new freedom in illumination design
▪ exact cutouts for integrated lights
▪ can be completely installed by the drywall constructor
without any electrical knowledge▪
Tel. 01372 888 455 | www.flairlight.co.ukTel. 01372 888 455 | www.flairlight.co.uk
Tel. 01372 888 455 | www.flairlight.co.uk
95
RIG
ILU
X® L
ED li
ne li
ghts
for
dryw
all c
onst
ruct
ion
dot-spotMade in Germany
▪ LED line light, 19 mm in width, homogeneously glowing, with magnetic mount
▪ complete system, dry construction molding with flush mounted LED line light
▪ complete price, incl. custom packing according to plan or customer specification
▪ further versions upon request
Art.-No. Model Type Watt CRI
RIGILUX® 19 VI
75191.21 RI 19 VI Premium warm white 2700 K 24 V DC 9,6 W/m ca. 600 lm/m >80
75191.23 RI 19 VI Premium neutral white 4000 K 24 V DC 9,6 W/m ca. 650 lm/m >80
75191.25 RI 19 VI Premium cool white 6300 K 24 V DC 9,6 W/m ca. 670 lm/m >80
75191.28 RI 19 VI Premium RGB 24 V DC 16,6 W/m ca. 445 lm/m -
75191.01 RI 19 VI Standard warm white 2700 K 24 V DC 9,6 W/m ca. 1000 lm/m >80
75191.04 RI 19 VI Standard white 4500 K 24 V DC 9,6 W/m ca. 1000 lm/m >80
75191.02 RI 19 VI Standard warm white 2700 K 24 V DC 19,2 W/m ca. 2000 lm/m >80
75191.05 RI 19 VI Standard white 4500 K 24 V DC 19,2 W/m ca. 2000 lm/m >80
75191.12 RI 19 VI Standard blau 470 nm 24 V DC 9,6 W/m -
75191.13 RI 19 VI Standard grün 527 nm 24 V DC 9,6 W/m -
75191.14 RI 19 VI Standard amber 590 nm 24 V DC 9,6 W/m -
75191.15 RI 19 VI Standard rot 625 nm 24 V DC 9,6 W/m -
75191.09 RI 19 VI Standard RGBW, 3000 K 24 V DC 19,2 W/m ca. 1120 lm/m -
Accessories for RIGILUX® light systems / power supplies and LED controls
Art.-No. Model Description Dimensions
97001 RL AK 1 Connecting cable 5 m
97002 RL AK 2 Connecting chain with 2 connectors 7 m
97003 RL AK 3 Connecting chain with 5 connectors 10 m
97004 RL VL 2 Connecting cable 2 m
97005 RL VL 5 Connecting cable 5 m
97006 RL AV 6 Terminal block with 6 connectors
97000 RI GER Mitre cut
RIGILUX® 19 VI
19 mm
34 mm
250 mm
dot-spot96
RIGILUX® 19 TI
RIG
ILU
X® L
ED li
ne li
ghts
for d
ryw
all c
onst
ruct
ion
▪ LED line light, 19 mm in width, homogeneously glowing, with magnetic mount
▪ complete system, dry construction molding with integrated LED line light
▪ semi-integrated light bar, therefore very good illumination by reflection on the surrounding surfaces
▪ complete price, incl. custom packing according to plan or customer specification
▪ further versions upon request
Art.-No. Model Type Watt CRI
RIGILUX 19® TI
75192.22 RI 19 TI Premium warm white 2700 K 24 V DC 19,2 W/m ca. 1410 lm/m >80
75192.24 RI 19 TI Premium neutral white 4000 K 24 V DC 19,2 W/m ca. 1512 lm/m >80
75192.26 RI 19 TI Premium cool white 6300 K 24 V DC 19,2 W/m ca. 1656 lm/m >80
75192.02 RI 19 TI Standard warm white 2700 K 24 V DC 19,2 W/m ca. 2100 lm/m >80
75192.05 RI 19 TI Standard neutral white 4000 K 24 V DC 19,2 W/m ca. 2400 lm/m >80
75192.09 RI 19 TI Standard RGBW, 3000 K 24 V DC 19,2 W/m ca. 1120 lm/m -
19 mm
23 mm
250 mm
Accessories for RIGILUX® light systems / power supplies and LED controls
Art.-No. Model Description Dimensions
97001 RL AK 1 connecting cable 5 m
97002 RL AK 2 Connecting chain with 2 connectors 7 m
97003 RL AK 3 Connecting chain with 5 connectors 10 m
97004 RL VL 2 Connecting cable 2 m
97005 RL VL 5 Connecting cable 5 m
97006 RL AV 6 Terminal block with 6 connectors
97000 RI GER Mitre cut
Tel. 01372 888 455 | www.flairlight.co.ukTel. 01372 888 455 | www.flairlight.co.uk
Tel. 01372 888 455 | www.flairlight.co.uk
Tel. 01372 888 455 | www.flairlight.co.uk
97
RIG
ILU
X® L
ED li
ne li
ghts
for
dryw
all c
onst
ruct
ion
dot-spotMade in Germany
RIGILUX® 30 VI
▪ LED line light, 30 mm in width, homogeneously glowing, with magnetic mount
▪ complete system, dry construction molding with flush mounted LED line light
▪ complete price, incl. custom packing according to plan or customer specification
▪ further versions upon request
Art.-No. Model Type Watt CRI
RIGILUX® 30 TI
75300.22 RI 30 VI Premium warm white 2700 K 24 V DC 19,2 W/m ca. 1410 lm/m >80
75300.24 RI 30 VI Premium neutral white 4000 K 24 V DC 19,2 W/m ca. 1512 lm/m >80
75300.26 RI 30 VI Premium cool white 6300 K 24 V DC 19,2 W/m ca. 1656 lm/m >80
75300.02 RI 30 VI Standard warm white 2700 K 24 V DC 19,2 W/m ca. 2100 lm/m >80
75300.05 RI 30 VI Standard neutral white 4000 K 24 V DC 19,2 W/m ca. 2400 lm/m >80
75300.09 RI 30 VI Standard RGBW, 3000 K 24 V DC 19,2 W/m ca. 1120 lm/m -
30 mm
57 mm
250 mm
Accessories for RIGILUX® light systems / power supplies and LED controls
Art.-No. Model Description Dimensions
97001 RL AK 1 Connecting cable 5 m
97002 RL AK 2 Connecting chain with 2 connectors 7 m
97003 RL AK 3 Connecting chain with 5 connectors 10 m
97004 RL VL 2 Connecting cable 2 m
97005 RL VL 5 Connecting cable 5 m
97006 RL AV 6 Terminal block with 6 connectors
97000 RI GER Mitre cut
dot-spot98
Acc
esso
ries
LED power supplies 12 V, constant voltage Art.-No. Model Description Dimensions
90121 snt 12/12 Power supply 12 V 12 W, IP 20, with barrel connector 70 x 30 x 65 mm
90104 nt 12/6 do Power supply 12 V 6 W, IP 20 for indoor applications, for mounting in pattress boxes 50 x 40,8 x 21,5 mm
90105 nt 12/6 od set Power supply 12 V 6 W, IP 65 for exterior applications 94 x 94 x 57 mm
90112 nt 12/12 Power supply 12 V 12 W, IP 67, for mounting in pattress boxes Ø 55, H 24 mm
90134 nt 12/24 Power supply 12 V 24 W, IP 67, for mounting in pattress boxes Ø 63 x 32 mm
LED power supplies 12 V, constant voltage
▪ electronic LED switching power supplies
▪ fully encapsulated version, IP 67 for outdoor use, IP 20 for indoor use
▪ protected against short circuit, overload, overvoltage and overtemperature
▪ Input voltage 90 - 305 V DC, 127 - 431 V DC (IP 67), 220 - 240 (IP 20)
▪ dimmable models (D) with PWM output 0 - 100%, 3 in 1 dimming input: 1 - 10 V, PWM signal or potentiometer for dimming
LED light strips (not suitable for dimming the dot-spot LED spots)
▪ further models, e.g. for top-hat rail installation available upon request
▪ Data sheets containing the full specification available on the Internet at www.dot-spot.de in the section Accessories
▪ Observe installation instructions on p. 39
Art.-No. Model Description Dimensions
90106 nt 12/25 67 Power supply ► 12 V, 25 W, IP 67 148 x 40 x 30 mm
90130 nt 12/30 20 Power supply ► 12 V, 30 W, IP 20 140 x 45 x 27,5 mm
90107 nt 12/40 67 Power supply ► 12 V, 40 W, IP 67 162,5 x 43 x 32 mm
90107-D nt 12/40 67 D Power supply ► 12 V, 40 W, IP 67, dimmable 150 x 53 x 35 mm
90131 nt 12/60 20 Power supply ► 12 V, 60 W, IP 20 157 x 54 x 36 mm
90108 nt 12/60 67 Power supply ► 12 V, 60 W, IP 67 162,5 x 43 x 32 mm
90108-D nt 12/60 67 D Power supply ► 12 V, 60 W, IP 67, dimmable 150 x 53 x 35 mm
90132-D nt 12/120 67 D Power supply ► 12 V, 120 W, IP 67, dimmable 191 x 63 x 37,5 mm
90117 nt 12/150 67 Power supply ► 12 V, 150 W, IP 67 228 x 68 x 38,8 mm
90118 nt 12/240 67 Power supply ► 12 V, 192 W, IP 67 244,2 x 68 x 38,8 mm
90119 nt 12/320 67 Power supply ► 12 V, 264 W, IP 67 252 x 90 x 43,8 mm
Accessories8
FIP 67 M
SELV
up to 120 W
from 150 W
Foto ▪ photograph ▪ photo: LIWATEC
▪
Tel. 01372 888 455 | www.flairlight.co.uk
99
dot-spotMade in Germany
Acc
esso
ries
Accessories
LED power supplies 24 V, constant voltage Art.-No. Model Description Dimensions
90314 snt 24/24 Power supply 24 V 24 W, IP 20, with barrel connector 80 x 30 x H 65 mm
90315 nt 24/12 Power supply 24 V, 12 W, IP 67, for mounting in pattress boxes Ø 55 mm, H 24 mm
90316 nt 24/24 Power supply 24 V, 24 W, IP 67, for mounting in pattress boxes Ø 63 x 32 mm
LED power supplies 24 V, constant voltage
▪ electronic LED switching power supplies
▪ fully encapsulated version, IP 67 for outdoor use, IP 20 for indoor use
▪ protected against short circuit, overload, overvoltage and overtemperature
▪ Input voltage 90 - 305 V DC, 127 - 431 V DC (IP 67), 220 - 240 (IP 20)
▪ dimmable models (D) with PWM output 0 - 100%, 3 in 1 dimming input: 1 - 10 V, PWM signal or potentiometer for dimming
LED light strips (not suitable for dimming the dot-spot LED spots)
▪ further models, e.g. for top-hat rail installation available upon request
▪ Data sheets containing the full specification available on the Internet at www.dot-spot.de in the section Accessories
▪ Observe installation instructions on p. 39
Art.-No. Model Description Dimensions
90304 nt 24/25 67 Power supply ► 24 V, 25 W, IP 67 148 x 40 x 32 mm
90324 nt 24/30 20 L Power supply ► 24 V, 30 W, IP 20 241 x 32 x 16,5 mm
90325 nt 24/60 20 Power supply ► 24 V, 60 W, IP 20 157 x 54 x 36 mm
90306 nt 24/60 67 Power supply ► 24 V, 60 W, IP 67 162,5 x 43 x 32 mm
90306-D nt 24/60 67 D Power supply ► 24 V, 60 W, IP 67, dimmable 150 x 53 x 35 mm
90307 nt 24/90 67 Power supply ► 24 V, 90 W, IP 67 161 x 61 x 36 mm
90307-D nt 24/90 67 D Power supply ► 24 V, 90 W, IP 67, dimmbar 171 x 63 x 37,5 mm
90326-D nt 24/120 67 D Power supply ► 24 V, 120 W, IP 67, dimmbar 191 x 63 x 37,5 mm
90311 nt 24/150 67 Power supply ► 24 V, 150 W, IP 67 228 x 68 x 38,8 mm
90312 nt 24/240 67 Power supply ► 24 V, 240 W, IP 67 244,2 x 68 x 38,8 mm
90313 nt 24/320 67 Power supply ► 24 V, 320 W, IP 67 252 x 90 x 43,8 mm
90327 nt 24/600 67 Power supply ► 24 V, 600 W, IP 67 280 x 144 x 48,5 mm
FIP 67 M
SELV
up to 120 W
from 150 W▪
dot-spot100
Accessories
Accessories
LED 1-channel dimming system
▪ LED 1-channel PWM dimming system, constant voltage for dot-spot LED spots and light strips
▪ DS-2501NS, 1-ch dimming module controllable with 1- and 5-channel remote control and/or wired button; furthermore, the module can be
operated via the WiFi transmitter Wi-Fi trmt 1 using a tablet or a smartphone
▪ DSP-1009-75W-CV, 24 V power supply with integrated radio dimmer. ▪ Controllable with 1- and 5-channel remote control and/or wired
button; furthermore, the module can be operated via the WiFi transmitter Wi-Fi trmt 1 using a tablet or a smartphone
▪ DS-2006, 1-ch dimming module for controlling with 1 - 10 V signal
▪ Dimming modules voltage range 12 - 36 V, max. current 8 A
▪ further versions, e.g. top-hat rail installation or IP-protected versions available upon request
Art.-No. Model Description Dimensions
91009 DS-2801 5-Zonen Fernbedienung, remote control with wall support 136 x 39x 12 mm
91011 DS-2807P 1-zone remote control, for wall installation Ø 32 x 9,8 mm
91008 DS-2501NS Touch/radio-controlled dimmer CV, 8 A 95 x 37 x 20 mm
91012 DS-2006 1 - 10 V dimmer CV, 8 A 95 x 37 x 20 mm
90340DSP-1009-75W-CV
Power supply ► 24 V, 75 W, IP 20, with radio-controlled dimmer 210 x 50 x 32 mm
LED RGB(W) 1-4-channel radio system, programmable
▪ LED PWM radio controller with receiver for 1-, 2-, 3-, 4-channel, constant voltage for dot-spot spots and LED strips
▪ Voltage 8 - 26 V, 1-channel module 8 A, 2-channel module 2 x 5 A, 3-channel module 3 x 5 A, 4-channel module 4 x 4 A
▪ 3-/4-channel module with 11 preprogrammed lighting scenarios, and 16 fixed colours, 3 programmes freely configurable via USB dongle;
with fire and thunderstorm simulation
▪ multiple modules linkable via radio, linkable with M12 plug system
▪ further components, e.g. for WiFi or Bluetooth control available upon request
Art.-No. Model Description Dimensions
91501 fb funk 1K Radio remote control for fc radio 1 ch 105 x 68 x 28 mm
91502 fb funk 2K Radio remote control for fc radio 2 ch 105 x 68 x 28 mm
91500 fb funk Radio remote control for RGB and RGBW controller 105 x 68 x 28 mm
91701 fc funk 1K 1-channel radio controlled controller, CV, 8 A 182 x 52 x 22 mm
91702 fc funk 2K 2-channel radio controlled controller, CV, 2 x 5 A 182 x 52 x 22 mm
91703 fc funk RGB 3-channel radio controlled controller, CV, 3 x 5 A 182 x 52 x 22 mm
SELV
SELV
Tel. 01372 888 455 | www.flairlight.co.uk
91704 fc funk RGBW 4-channel radio controlled controller, CV, 4 x 4 A 182 x 52 x 22 mm
91705 fc funk do USB radio dongle, for programming via PC 80 x 25 x 15 mm
LED RGBW 4-zone radio system with WiFi option
▪ LED RGB(W) PWM radio system, constant voltage for dot-spot spots and LED strips
▪ Voltage 12 - 36 V, 4 x 5 A, controller with innovative plug terminals
▪ Setting of preprogrammed dynamic colour sequences or fixed colours via colour wheel touch control
▪ Control element as handheld radio transmitter and/or glass touch panel for flush mounting
▪ controllable via Wi-Fi trmt1 using a free Android or IOS application on smartphones and tablets
▪ the control units and the application allow the setting up of different and individually controllable zones
▪ Housing variants IP 20, IP 67 and DIN rail installation
Art.-No. Model Description Dimensions
91503 DS-2819S 4-zone handheld radio transmitter 120 x 55 x 17 mm
91504 DS-2820 4-zone radio touch panel for fl ush-mounting box 86 x 86 x 30 mm
91706 DS-1009PD 4-channel radio controller CV, 4 x 5 A 166 x 53,4 x 23 mm
91707 DS-1009DIN 4-ch radio controller for top-hat rail CV, 4 x 5 A 110 x 53 x 65 mm
91708 DS-1009FAWP 4-channel radio controller CV, 4 x 5 A, IP 67 180,5 x 73,6 x 38 mm
91709 DS-2818WiTR Wi-Fi transmitter 99 x 55 x 20 mm
LED Dali System
▪ LED RGB(W) PWM Dali system, constant voltage for dot-spot spots and LED strips
▪ Voltage 12 - 36 V, 4 x 5 A, controller with innovative plug terminals
▪ Setting via Dali system provided by the customer or via optional, elegant glass touch panel with preprogrammed dynamic colour sequences or
fixed colours to be chosen using the colour wheel ▪ Housing variants IP 20, IP 67 and DIN rail installation
Art.-No. Model Description Dimensions
90912DS-2300TR-RGBW
4-zone radio touch panel for fl ush-mounting box 86 x 86 x 30 mm
90913 DS-2303P 4-channel Dali controller CV, 4 x 5 A 166 x 53,4 x 23 mm
90914 DS-2303DIN 4-channel Dali controller for DIN rail cv, 4 x 5 A 110 x 53 x 65 mm
90915 DS-2303BWP 4-channel Dali controller CV, 4 x 5 A, IP 67 180,5 x 73,6 x 38 mm
90916 DS-2303S 1-channel radio controller CV, 1 x 5 A 82 x 33 x 20 mm
101
dot-spotMade in Germany
Acc
esso
ries
Accessories
IP 67
SELV
IP 67
SELV
dot-spot102
Acc
esso
ries
Accessories
LED DMX System
▪ LED RGB(W) PWM DMX system, constant voltage for dot-spot spots and LED strips
▪ Voltage 12 - 36 V, 4 x 5 A, controller with innovative plug terminals
▪ Setting via DMX system provided by the customer or via optional, elegant glass touch panel with preprogrammed dynamic colour sequences or
fixed colours to be chosen using the colour wheel
▪ Housing variants IP 20, IP 67 and DIN rail installation
Art.-No. Model Description Dimensions
90917 DS-2812 4-zone DMX touch panel for flush-mounting box 86 x 86 x 30 mm
90918 DS-2102P 4-channel DMX controller cv, 4 x 5 A 166 x 53,4 x 23 mm
90919 DS-2102DIN 4-channel DMX controller for DIN rail cv, 4 x 5 A 110 x 53 x 65 mm
90920 DS-2102D(WP) 4-channel DMX controller cv, 4 x 5 A, IP 67 180,5 x 73,6 x 38 mm
LED KNX System
▪ LED RGB(W) PWM KNX system, constant voltage for dot-spot spots and LED strips
▪ Voltage 12-36 V, 4 x 5 A, controller with innovative plug terminals
▪ Housing variants IP 20 and DIN rail installation
Art.-No. Model Description Dimensions
90921 DS-KNX9512FA 4-channel KNX controller cv, 4 x 5 A 166 x 53,4 x 23 mm
90922 DS-KNX9511FA 4-channel KNX controller for DIN rail cv, 4 x 5 A 91 x 72 x 66,4 mm
4-channel power repeater
▪ LED RGB(W) PWM power repeater, constant voltage for dot-spot spots and LED strips
▪ Can be connected with any radio, Dali, DMX or KNX controller in order to increase the connected load
▪ Voltage 12 - 36 V, 4 x 5 A, or 8 A controller with innovative plug terminals
▪ Housing variants IP 20, IP 67 and DIN rail installation
Art.-No. Model Description Dimensions
90923 DS-3002 4-channel repeater CV, 4 x 8 A 170 x 59 x 29 mm
90924 DS-3003S 1-channel repeater CV, 1 x 8 A 95 x 37 x 20 mm
90925 DS-3001DIN 4-channel repeater for DIN rail CV, 4 x 5 A 110 x 53 x 65 mm
90926 DS-3001WP 4-channel radio controller CV, 4 x 5 A, IP 67 180,5 x 73,6 x 38 mm
IP 67
SELV
SELV
IP 67
SELV
Tel. 01372 888 455 | www.flairlight.co.uk
103
dot-spotMade in Germany
Acc
esso
ries
Accessories
Mounting accessories Art.-No. Model Description
98000 KL Geko Special glue Hydro Geko, for outside and inside application, waterproof bonding, cartridge 300 ml
98001 KL trans Special glue, transparent, for outside and inside application, cartridge 300 ml
98002 KB VHB 55/17 VHB special adhesive tape, colourless, for outdoor and indoor use, thickness 0.5 mm, roll 55 m, width 17 mm
98003 KB VHB 33/8 VHB special adhesive tape, colourless, for outdoor and indoor use, thickness 0.5 mm, roll 33 m, width 8 mm
98004 KB 20/60 Mirror tape, for indoor use, adhesive pad, width 20 mm, length 60 mm
98005 KB 15/66 Mirror tape, for indoor use, roll, width 15 mm, length 66 m
Connection cable without plug Art.-No. Model Description Dimensions
92602 AK 10 PUR 2 x 0,5 PUR connecting line 2 x 0,5 mm² 10 m
92600 AK 50 PUR 2 x 0,5 PUR connecting line 2 x 0,5 mm² 50 m
92603 AK 10 PVC 5 x 0,35 PVC connecting line 5 x 0,35 mm² 10 m
92601 AK 50 PVC 5 x 0,35 PVC connecting line 5 x 0,35 mm² 50 m
Connection accessories for open cables Art.-No. Model Description Dimensions
94700 VS-1 Set for waterproof cable connection
94502 KV G 68 Cable connector, straight, IP 68, 3-pole connection
94501 KV T 68 Cable connector T union, IP 68, 3-pole connection
94801 Gel-Box 1 Gel box, with 2 terminals 155 x 50 x 33 mm
94802 Gel-Box 2 Gel box, with 4 terminals 200 x 75 x 37 mm
Floor junction boxes and cover stonesArt.-No. Model Description Dimensions
94901 ksr 25 fl oor junction box, round Ø 25 cm
94902 kse 41/28 floor junction box, rectangular 41 x 28 cm
94903 adf 1 cover stone 200 x 200 x 300 mm
dot-spot104
Zube
hör ▪ A
cces
sorie
s ▪ A
cces
soire
s
Accessories
Connection cable for IP 20 LED bars Art.-No. Model Description Dimensions
92401 AK sl 20-015 ST 2-pole connection cable, with plug 0,15 m
92402 AK sl 20-2 BU 2-pole connection cable, with socket 2 m
92403 AK sl 20-5 BU 2-pole connection cable, with socket 5 m
92411AK sl RGB 20-015 ST
4-pole connection cable, with plug 0,15 m
92412AK sl RGB 20-2 BU
4-pole connection cable, with socket 2 m
92413AK sl RGB 20-5 BU
4-pole connection cable, with socket 5 m
Connection cable for IP 67 LED bars Art.-No. Model Description Dimensions
92501 AK sl 67-015 ST 2-pole connection cable, with plug 0,15 m
92502 AK sl 67-2 BU 2-pole connection cable, with socket 2 m
92503 AK sl 67-5 BU 2-pole connection cable, with socket 5 m
92511AK sl RGB 67-015 ST
4-pole connection cable, with plug 0,15 m
92512AK sl RGB 67-2 BU
4-pole connection cable, with socket 2 m
92513AK sl RGB 67-5 BU
4-pole connection cable, with socket 5 m
Tel. 01372 888 455 | www.flairlight.co.uk
105
dot-spotMade in Germany
Zube
hör ▪ A
cces
sorie
s ▪ A
cces
soire
s
ZubehörAccessoriesAccessoires
Foto ▪ photograph ▪ photo: LIWATEC
12 x clarios 15 W
dot-spot106
LED
Dis
play
s fo
r ad
vert
isin
g an
d ar
chit
ectu
re
LED displays for advertising and architecture
Eye-catching LED displays and video screens for advertising and architecture
▪ Video screens, monochrome and RGB, to display video clips, animated or static images and texts
▪ patented technology, developed and manufactured in Europe
▪ waterproof LED panels, IP 67, for indoor and outdoor use
▪ high luminous intensity, clearly readable even in direct sunlight
▪ modular design, die single small-format panels can be arranged to form surfaces of any geometry, also roundings are possible
▪ extremely light, panel thickness just 8 mm, with power supply 31 mm, weight only 18 kg/m², no complex support structure required
▪ low energy consumption, only 110 W/m² averagely during operation
▪ Controlled by linear driver, therefore a brilliant and flicker-free image
▪ absolutely quiet maintenance-free, since no fan is needed for cooling
▪ available with various resolutions depending on the purpose
▪ with brightness sensor for the dynamic adjustment of the luminous intensity
▪ Airing possible in automatic stand-alone operation or via remote Internet access
9
Tel. 01372 888 455 | www.flairlight.co.uk
107
dot-spotMade in Germany
dot-spot representatives
The information in this catalogue was correct when print-ed. We reserve the right to make technical changes. For the latest documentation visit our website at www.dot-spot.de
Copyright, reprinting, or reproduction of excerpts subject to permission of dot-spot GmbH & Co. KG.
Spain
SOLTEC SISTEMAS DE ILUMINACIÓN S.L. Pou del Posmó, 27Pol. Ind. Les GalguesES-03750 Pedreguer (Alicante)Tel.: +34 (0) 96 645 41 14Fax: +34 (0) 96 575 77 38 Mail: info@soltecsystem.comWeb: www.soltecsystem.com
Czech Republic
Green engineering s.r.o.Olešná 101CZ-Olešná 398 43Tel +42 (0) 382 587 193Fax +42 (0) 382 587 193Mail: info@dot-spot.czWeb: www.dot-spot.cz
Hungary
Ledker Kft.Bemutatóterem: 1111 Budapest, Budafoki út 10/A.Tel.: +36 / 1 209 91 12 Mail: info@ledker.huWeb: www.ledker.hu
Cyprus
DARK ARCHITECTURAL LIGHTINGAndreas PieridesAylas Phylaxeos 149Maylia Court3083 Limassol-CyprusTel.: +357 25 253275Fax.: +357 99 666643Mail: andreas@dark-cy.comWeb: www.dark-cy.com
ASIA
India
M/S INNOVATIVE LIGHTING DESIGNS LTDD-14/9, First Floor,Okhla Industrial Area, Phase - 1New Delhi - 110020Tel.: +91 11 414 06 71 6Fax: +91 11 414 06 71 7Mail: v.jain@ildlimited.comWeb: www.ildlimited.com
Israel
Steinitz Lirad - Lighting Engineering Ltd.25 Hatzoref St.Har- Yona Industrial AreaP.O.B. 588Nazareth Illit – 17000Tel.: +972 4 6414 525Fax: +972 4 6414 306Mail: lirad@interg.co.ilWeb: http://steinitzliradlighting.com
Middle East, Arabian Peninsula
DPS INDUSTRIAL GMBH & CO. KGSachsenstraße 5D-20097 HamburgTel.: +49 (0) 40 68 28 97 - 0Fax: +49 (0) 40 68 28 97 - 31Mail: light@dps-industrial.deWeb: www.dps-lighting.de
Singapore
Relex Illumination Pte LtdBlk 3014A Ubi Road 1 #07-07/08Singapore 408703Tel.: +65 (0) 6285 3633Fax: +65 (0) 6285 3107Mail: info@relex.com.sgWeb: www.relex.com.sg
AFRICA
South Africa
ILLUMINATE PROJECT LIGHTING6 Roderick Way, Constantia, 7806, Cape Town, South AfricaTel: +27 (0) 82 824 9274Fax: +27( 0) 86 243 3951Mail: ab@illuminatelighting.co.zaWeb: www.illuminatelighting.co.za
dot-
spot
Stü
tzpu
nkth
ändl
er ▪
dot-s
pot r
epre
sent
ativ
es ▪
Repr
ésen
tant
s do
t-spo
t
dot-spot GmbH & Co. KGIndustriestraße 1A90592 Schwarzenbruck
dot-spot representatives abroad
Norway
Nortronic ASSkiveien 61410 KolbotnTel.: +47 66 81 38 60Fax: +47 66 81 38 61Mail: fi rmapost@nortronic.no
Austria
KLAUS EBNERKuntenweg 7A-6114 WeerTel.: +43 (0) 664 406 29 21Mail: klaus.ebner@dot-spot.de
Poland
POLTHERAul. Traugutta 2543-300 Bielsko-BiałaTel: + 48 33 821 9363Fax: + 48 33 821 9363Web: www.dot-spot.pl
Switzerland
dot-spot SchweizHofmatt 22CH-6332 HagedornTel.: +41 (0) 41 780 52 55Fax: +41 (0) 41 780 52 80Mail: Vertrieb@dot-spot.chWeb: www.dot-spot.ch
M. SCHÖNENBERGER AGIndustriestraße 17CH-5507 MellingenTel. +41 (0) 56 48 18 141Fax +41 (0) 56 48 18 145Mail: info@msch-ag.chWeb: www.msch-ag.ch
Serbia
aiLEDis d.o.o.Zelengorska 2RS-11300 SmederevoTel.: +381 (0) 64 35 98 185 Mail: offi ce@aiLEDis.rs Web: www.aiLEDis.rs
EUROPE:
Balearic Islands
InterLED, Sounds & VisionsGremi de Tintorers 43Son CastellóES-07009 Palma de MallorcaTel. +34 (0) 664 36 44 44Mail: mail@interled.esWeb: www.MallorcaLED.com
LeuchtenkingAvda. Rey Jaume, No. 100, planta1, local 2, 07180 Santa Ponsa, Islas Baleares SpainTel.: +34 (0) 661 806 206Mail: mallorca@leuchtenking.deWeb: www.lightingking.es
Italy
Interactive System GmbhPiave Str. 7339012 Meran (BZ)Tel.: +39 0473 235474Fax: +39 0473 270242Email: info@ias.bz.it
Malta
BRIGHTER SOLUTIONS LTD.2/3 Tal-Balal RoadXwieki L/O Gharghur GHR9014MaltaTel.: +356 (0) 21424750 - 27424750Fax: +356 (0) 21 364 074Mail: info@brightersolutions.com.mtWeb: www.brightersolutions.com.mt
Netherlands
Q-CAT Lighting b.v.Van Heekstr 113125 BN SchiedamTel.: +31 (0) 10 415 18 11Fax: +31 (0) 10 415 17 15Mail: info@qcat.nlWeb: www.qcat-lighting.nl
Tel.: +49 (0) 9128 / 72 22 17 - 0Fax: +49 (0) 9128 / 72 22 17 - 9Mail: service@dot-spot.deWeb: www.dot-spot.de
United Kingdom
Flairlight Designs LtdUnit 18, First QuarterBlenheim Road, Longmead Business Park,Epsom, Surrey. KT19 9QNTel: +44 (0) 1372 888455Fax: +44 (0) 1372 888215Mail: sales@flairlight.co.ukWeb: www.flairlight.co.uk
Flairlight Head Office & Showroom Unit 18 First QuarterBlenheim RoadLongmead Business Park Epsom, SurreyKT19 9QNUnited KingdomTel. 01372 888 455 | www.flairlight.co.uk
Sales@flairlight.co.uk