Post on 06-Nov-2020
KD-2900 Cryostat Microtome
Features:
■ Double-compressor semi automatic cryostat.
Computer temperature control,manual and automated
defrost fuction,separate cooling setting of freeze chamber
and specimen block.
■Imported step motor driving table and specimen
feeding systems.
■ LCD screen shows sample travel,section
thickness,fuction control,temperature
control,date,time,temperature,time on/off,fumigating and
defrost and so on.
■Streamline external design,elegant appearance.
■ Big freeze chamber,rapid specimen freezing
table.
■ Humanity sleep mode,after initializing,the
teperature in freezing chamber can be controlled -1~
-10℃,when stop initializing,temperature can reach to
working temperature within 10 minutes.
■User-friendly specimen clamp,easy and secure
handwheel system.
■ Instant temperature display, Without fluorine
refrigeration technology, fumigation , Ultraviolet
disinfection.
■ Time of power on/off,defrost,fumigationg disinfection can be set anytime in one week.
■Specimen retraction fuction,motorized specimen feeding systems.fast forward;trimming/sectioning button
can be changed easily and conveniently.
Technical Specifications:
■Freezing chamber temperature range: -1℃~-30℃
■Freezing table temperature: -40℃
■Lowest temperature of peltier unit on freeze shelf: -60℃
■Section thickness range: 1μm-30μm,in 1 μm increment
30μm-60μm,in 5μm increment
■Trimming thickness range: 1~95μm
■Minumum setting value: 1μm
■Maximum specimen size: 50mm
■Vertical stroke: 70mm,Object feed: 28mm
■Spection retraction range: 20μm
■Angle of specimen clamp can be adjusted on 8 degrees X/Y axis
■Freezing table can put 10 pcs specimen block
■Speed of specimen feeding: 0.8mm/sec
■Temperature of freezing chamber can reach down to -30℃ within 30 minutes
■Frostless glass door
■Working Voltage: AC220V 50Hz / AC110V 60Hz
■Power draw: 600VA
■Dimension: 660x640x1130mm
■Net weight: 148kg
KD-2800 Cryostat Microtome
Features:
■Simple-compressor semi automatic cryostat. Computer
temperature control,manual and automated defrost
fuction,freezing temperature can be set in freezing chamber.
■ Imported step motor driving table and specimen
feeding systems
■ LCD screen shows sample travel,section
thickness,fuction control,temperature
control,date,time,temperature,time on/off,fumigating and
defrost and so on.
■Streamline external design,elegant appearance
■Big freeze chamber,rapid specimen freezing table
■Humanity sleep mode,after initializing,the teperature
in freezing chamber can be controlled -1~-10℃,when stop
initializing,temperature can reach to working temperature
within 10 minutes.
■ User-friendly specimen clamp,easy and secure
handwheel system
■ Instant temperature display, Without fluorine
refrigeration technology, fumigation disinfection
■Time of power on/off,defrost,fumigationg disinfection can be set anytime in one week.
■Specimen retraction fuction,motorized specimen feeding systems.fast forward;trimming/sectioning button
can be changed easily and conveniently.
Technical Specifications:
■Freezing chamber temperature range: -1℃~-30℃
■Freezing table temperature: -40℃
■Lowest temperature of peltier unit on freeze shelf: -60℃
■Section thickness range: 1μm-30μm,in 1 μm increment
30μm-60μm,in 5μm increment
■Trimming thickness range: 1~95μm
■Minumum setting value: 1μm
■Maximum specimen size: 35 x 35mm
■Vertical stroke: 70mm,Object feed: 28mm
■Spection retraction range: 20μm
■Speed of specimen feeding: 0.8mm/sec
■Temperature of freezing chamber can reach down to -30℃ within 30 minutes
■Frostless glass door
■Working Voltage: AC220V 50Hz / AC110V 60Hz
■Power Draw: 600VA
■Dimension: 660x640x1130mm
■Net weight: 125kg
KD-3368AM-Ⅲ Automated Microtome+Fast Freezing machine
This model combime
KD-3368AM Fully-auto Microtome
and KD-III fast freezing
machine.KD-III adopt high-power
semi-conductor freezing system and
advanced nano meterial.LCD shows
setting and current
temperature,self-temperature
control,self-protection systems an
defrost fuction etc.
This model adopt streamline
design,advanced fuction,stable
performance,user-friendly.Specimen
feed drive is controled by intelligent
control system..Precise electrical
mechanical design,Ergonomic
concept.
Technical Specifications:
■Section thickness setting range: 0.5~100μm
0.5~2μm increment 0.5μm
2~10μm increment 1μm
10~20μm increment 2μm
20~100μm increment 5μm
■Trimming thickness setting range:1~600μm
1~10μm increment 1μm
10~20μm increment 2μm
20~100μm increment 10μm
100~600μm increment 50μm
■Minimum setting value: 0.5μm
■Object feed: 26mm
■Vertical stroke: 60mm
■Specimen retraction range: 20μm
■Specimen clamp rotated at an angle of 360 degrees.
■Maximum specimen size: 50 x 50mm
■Precision error: ±5%
■Pre-setting temperature range: ambient~-55℃
■Maximum temperature range for Cryo-plate ≥60℃
■Maximum temperature range for Cryo-probe: ≥50℃
■Maximum size of Cryo-pate: 45 x 40mm
■Pre-setting and current temperature shown in LCD
■Best section angle between Cryo-proble and section blade is 60 degrees
■Temperature of defrost display,pre-setting temperature can be stored itself afte working
■Temperature of section can be reached after freezing within 4~7 minutes
■Quick freezing systems,energy-saving
■Dual fuction section: freezing and paraffin use
■Working voltage:AC220V 50Hz, AC110V 60Hz
■Power draw:150VA (KD-3368AM);300VA (KD-Ⅲ)
■Dimension:580x60x310mm(KD-3368AM),420x190x410mm(KD-Ⅲ)
■Net weight:35kg(KD-3368AM) 8kg(KD-Ⅲ)
KD-3368AM Automated Microtome
This model is devoloped based on
semi-automatic microtome,it combine
advanced and patented technology,and it's very
good choice for histopathology research.
This model adopt streamline
design,advanced fuction,stable
performance,user-friendly.Specimen feed drive
is controled by intelligent control
system.Manual and automated sectioning
mode.Speed of sectioning can be
adjusted;emergency Stop(E-stop).Precise
electrical mechanical design,Ergonomic
concept.
Features:
■Advanced driving systems,fuctions of section,trimming,fast forward,backward etc
■LCD screen shows section and trimming thickness range,numbers of section and trimming
■Section and trimming mode can be finshed by controlling systems
■Handwheel can be locked at any position to assure user's safety
■Large waste tray,easy to unload
■Universal cassette clamp and standard specimen clamp;emergency stop systems
■Manual or fully automated section mode
■Fully-automated section has two modes: single and continuous;speed of section can be adusted
■Section and trimming mode can be exchanged easily
■Emergency stop system,overload protection fuction,sleep mode protection
■Emergency brake system
Technical Specifications:
■Section thickness range: 0.5~100μm
0.5~2μm increment 0.5μm
2~10μm increment 1μm
10~20μm increment 2μm
20~100μm increment 5μm
■Trimming thickness range: 1~600μm
1~10μm increment 1μm
10~20μm increment 2μm
20~100μm increment 10μm
100~600μm increment 50μm
■ Minimum setting value: 0.5μm
■Object feed: 28mm
■Vertical stroke: 60mm
■Specimen retraction range: 20μm
■Specimen clamp rotated at an angle of 360 degrees.
■Maximum specimen size: 50 x 50mm
■Precision error: ±5%
■Working Voltage: AC220V 50Hz / AC110V 60Hz
■Power Draw: 150VA
■Dimension: 580x360x310mm
■Net weight: 35kg
KD-3368-Ⅲ Semi-automatic Microtome+Fast Freezing machine
This model combime KD-3368 Automated Microtome and KD-III fast freezing machine.KD-III adopt
high-power semi-conductor freezing system and advanced nano meterial.LCD shows setting and current
temperature,self-temperature
control,self-protection systems an
defrost fuction etc.
This model adopt streamline
design,advanced fuction,stable
performance,user-friendly.Specime
n feed drive is controled by
intelligent control system..Precise
electrical mechanical
design,Ergonomic concept.
Technical Specifications:
■ Section thickness range:
1~100μm
1~10μm increment 1μm
10~20μm increment 2μm
20~100μm increment 5μm
■Trimming thickness range:1~100μm
■Minimum setting value: 1μm
■Object feed: 28mm
■Vertical stroke: 60mm
■Specimen retraction range: 20μm
■Specimen clamp rotated at an angle of 360 degrees
■Maximum specimen size: 50 x 50mm
■Precision error: ±5%
■Pre-setting temperature range: ambient~-55℃
■Maximum temperature range for Cryo-plate ≥60℃
■Maximum temperature range for Cryo-probe: ≥50℃
■Maximum size of Cryo-pate: 45 x 35mm
■Pre-setting and current temperature shown in LCD
■Best section angle between Cryo-proble and section blade is 60 degrees
■Temperature of defrost display,pre-setting temperature can be stored itself afte working
■Temperature of section can be reached after freezing within 4~7 minutes
■Quick freezing systems,energy-saving
■Dual fuction section: freezing and paraffin use
■Working Voltage: AC220V 50Hz
AC110V 60Hz
■Dimension:580x330x310mm (KD-3368)
420x190x410mm(KD-Ⅲ)
■Net weight:28kg(KD-3368) 8kg(KD-Ⅲ)
KD-3368 Semi-automatic Microtome
KD-3368 Semi-automatic microtome is new model after KD-3358 microtome,This model is devoloped based
on semi-automatic microtome,it combine advanced
and patented technology,and it's very good choice
for histopathology research.
This model adopt streamline design,advanced
fuction,stable performance,user-friendly.Specimen
feed drive is controled by intelligent control
system.Manual and automated sectioning
mode.Speed of sectioning can be
adjusted;emergency Stop(E-stop).Precise electrical
mechanical design,Ergonomic concept.
Features:
■ Advanced driving systems,fuctions of
section,trimming,fast forward,backward etc
■LCD screen shows section and trimming thickness range,numbers of section and trimming
■Section and trimming mode can be finshed by controlling systems
■Handwheel can be locked at any position to assure user's safety
■Large waste tray,easy to unload
■Universal cassette clamp and standard specimen clamp;emergency stop systems
Technical Specifications:
■Section thickness range: 1~100μm
1~10μm increment 1μm
10~20μm increment 2μm
20~100μm increment 5μm
■Trimming thickness range:1~100μm
■Minimum setting value: 1μm
■Object feed: 28mm
■Vertical stroke: 60mm
■Specimen retraction range: 20μm
■Specimen clamp rotated at an angle of 360 degrees.
■Maximum specimen size: 50 x 50mm
■Precision error: ±5%
■Working Voltage: AC220V 50Hz AC110V 60Hz
■Power draw: 50VA
■ Dimension:580x330x310mm
■Net weight:28kg
KD-3358-III Semi-automatic Microtome+Fast Freezing machine
This model combime KD-3358
Automated Microtome and KD-III
fast freezing machine.KD-III adopt
high-power semi-conductor freezing
system and advanced nano
meterial.LCD shows setting and
current emperature,self-temperature
control,self-protection systems an
defrost fuction etc.
This model adopt streamline
design,advanced fuction,stable
performance,user-friendly.Specimen
feed drive is controled by intelligent
control system..Precise electrical mechanical design,Ergonomic concept.
echnical Specifications:
■Section thickness range: 0.25~60μm
0.25~1μm increment 0.25μm
1~10μm increment 1μm
10~20μm increment 2μm
20~60μm increment 5μm
■Trimming thickness range: 0.25~60μm
■Minimum setting value: 0.25μm
■Object feed: 28mm
■Vertical stroke: 60mm
■Maximum specimen size: 50 x 50mm
■Precision error: ±5%
■Pre-setting temperature range: ambient~-55℃
■Maximum temperature range for Cryo-plate ≥60℃
■Maximum temperature range for Cryo-probe: ≥50℃
■Maximum size of Cryo-pate: 45 x 4mm
■Pre-setting and current temperature shown in LCD
■Best section angle between Cryo-probe and section blade is 60℃
■Temperature of defrost display,pre-setting temperature can be stored itself afte working
■Temperature of section can be reached after freezing within 4~7 minutes
■Dual fuction section: freezing and paraffin use.
■Working Voltage: AC220V 50Hz AC110V 60H
■Dimension:150VA(KD-3358)、300VA(KD-Ⅲ)
■Net weight:24kg(KD-3358) 8kg(KD-Ⅲ)
KD-3358Semi-automatic Microtome
KD-3358 Semi-automatic microtome is new model after KD-202,KD-1508,KD-2258This model adopt
advanced,modern histopathology research technology.It has stable performance,ergonomic concept,.Main
spare parts are imported from overseas.This model stand for very advanced technology and new development
direction of histopathology research.
Features:
■Advanced driving systems,fuctions of
section,trimming,fast forward,backward etc
■ LCD screen shows section and
trimming thickness range,numbers of section
and trimming
■Section and trimming mode can be
finshed by controlling systems
■ Handwheel can be locked at any
position to assure user's safety
■Large waste tray,easy to unload
■Universal cassette clamp and standard
specimen clamp;emergency stop systems
Technical Specifications:
■Section thickness range: 0.25~60μm
0.25~1μm increment 0.25μm
1~10μm increment 1μm
10~20μm increment 2μm
20~60μm increment 5μm
■Trimming thickness range:0.25~60μm
■Minimum setting value: 0.25μm
■Object feed: 28mm
■Vertical stroke: 60mm
■Maximum specimen size: 50 x 50mm
■Precision error: ±5%
■Working Voltage: AC220V 50Hz
AC110V 60Hz
■Dimension:150VA
■Net weight:24kg
KD-2268-Ⅲ Manual Microtome+Fast Freezing machine
This model combime
KD-2268 Manual Microtome and
KD-III fast freezing
machine.KD-III adopt high-power
semi-conductor freezing system
and advanced nano meterial.LCD
shows setting and current
temperature,self-temperature
control,self-protection systems an
defrost fuction etc.
This model adopt streamline
design,advanced fuction,stable
performance,user-friendly.Specime
n feed drive is controled by
intelligent control system..Precise
electrical mechanical design,Ergonomic concept.
Technical Specifications:
■Section thickness range: 0~60μm
0~20μm increment 1μm
20~60μm increment 5μm
■Minumum Setting value:1μm
■Precision Error:±5%
■Maximum Specimen Size:60×50mm
■Trimming Setting Mode:15μm or 35μm
■Specimen Retraction Range: 90μm
■Specimen retraction range of 90μm can be shut off
■Object feed: 30mm
■Vertical stroke: 70mm
■Angle of specimen clamp can be adjusted on 8 degrees X/Y axis
■Pre-setting temperature range: ambient~-55℃
■Maximum temperature range for Cryo-plate ≥60℃
■Maximum temperature range for Cryo-probe: ≥50℃
■Maximum size of Cryo-pate: 45 x 40mm
■Pre-setting and current temperature shown in LCD
■Best section angle between Cryo-proble and section blade is 60 degrees
■Temperature of defrost display,pre-setting temperature can be stored itself afte working
■Temperature of section can be reached after freezing within 4~7 minutes
■Quick freezing systems,energy-saving
■Dual fuction section: freezing and paraffin use
■Working Voltage: AC220V 50Hz, AC110V 60Hz
■Power draw:50VA(KD-2258S)、300VA(KD-Ⅲ)
■Dimension: 570x500x300mm(KD-2268),420x190x410mm(KD-Ⅲ)
■Net weight:33kg(KD-2268) 8kg(KD-Ⅲ)
KD-2268 Manual Microtome
KD-2268 microtome is
new-developed model,it offers features
different from others.This machine
adopt advanced guide
rail,high-precision lead srews,retraction
fuction,section and trimming mode.
This model has professional
design,secure
struction,high-precision,stable
preformance.It's prefectly suited for
those who expect precision sectioning.
Features:
■ Ergonomical conception of
devise,no feeling of tire for routine
operation
■Good section result whether by use of Standard Steel Knife or Disposable Blade
■Specimen clamp positioned at 8 X/Y precision orientation system
■Handweel system allow the handwheel locked at any position
■Specimen retraction fuction(this fuction can be shut),Cutting and trimming modes
■Course feed handwheel systems,closer to user to protect fatigue-free section
■Exact zero position precise orientation systems,easy to operate
■Red Knife guard to avoid any damage to user,and easy to change disposable blade
■Blade holder can be moved sidewise,no need to move blade
■An integrated storage tray (not supplied with basic instrument) ensures that ancillary tools are on
hand at all times
■Large Waste tray,easy to clean and unload
Technical Specifications:
■Section thickness range:0~60μm
■Setting value:0~20μm increment 1μm
20~60μm increment 5μm
■Minumum Setting value:1μm
■Precision Error:±5%
■Maximum Specimen Size:60x50mm
■Trimming Setting Mode:15μm or 35μm
■Specimen Retraction Range: 90μm
■Specimen retraction range of 90μm can be shut off
■Object Feed: 30mm,Vertical Stroke: 70mm
■Specimen Orientation System: 8 X/Y
■Dimension: 570mmx500mmx300mm
■Net Weight: 33kg
KD-2258S-Ⅲ Semi-automatic Microtome+Fast Freezing machine
This model combime
KD-2258S Semi-automatic
Microtome and KD-III fast
freezing machine.KD-III adopt
high-power semi-conductor
freezing system and advanced
nano meterial.LCD shows
setting and current
temperature,self-temperature
control,self-protection systems
an defrost fuction etc.
This model adopt
streamline design,advanced
fuction,stable
performance,user-friendly.Spec
imen feed drive is controled by
intelligent control system..Precise electrical mechanical design,Ergonomic concept.
Technical Specifications:
■Section thickness range: 0.5~100μm
0.5~2μm increment 0.5μm
2~10μm increment 1μm
10~20μm increment 2μm
20~100μm increment 5μm
■Trimming thickness range:0~100μm
■Precision error: ±5%
■Minimum setting value: 0. 5μm
■Object feed: 26mm
■Vertical stroke: 52mm
■Maximum specimen size: 60 x 50mm
■LCD screen shows thikness of sectioning,easy to identify.
■Pre-setting temperature range: ambient~-55℃
■Maximum temperature range for Cryo-plate ≥60℃
■Maximum temperature range for Cryo-probe: ≥50℃
■Maximum size of Cryo-pate: 45 x 40mm
■Pre-setting and current temperature shown in LCD
■Best section angle between Cryo-proble and section blade is 60 degrees
■Temperature of defrost display,pre-setting temperature can be stored itself afte working
■Temperature of section can be reached after freezing within 4~7 minutes
■Dual fuction section: freezing and paraffin use.
■Working Voltage: AC220V 50Hz , AC110V 60Hz
■Power Draw:50VA(KD-2258S)、300VA(KD-Ⅲ)
■Dimension: 540x400x290mm(KD-2258),420x190x410mm(KD-Ⅲ)
■Net weight:28kg(KD-2258S) 8kg(KD-Ⅲ)
KD-2258S Semi-automatic Microtome
KD-2258S Semi-automatic Microtome is
new generation to meet mordern
histopathology research. It adopt imported
guide ways,ideal devise,stable
performance,ergonomic concept,and it's new
development direction of histopathology
research.
Features:
■Ergonomic concept
■Microtome steel knife or disposable
microtome blade can be chosen
■Specimen clamp can be locked at any
position to ajust angle of sectioning
■Advanced driving systems,fuctions of
section,trimming,fast forward,backward etc
■LCD screen shows section thickness range
■Right handwheel can be locked at any position,easy and convenient
■Specimen return fuction,specimen clamp can be ajusted easily
■Blade holder can be moved horizontal or vertical,no need to touch the blade
■N Steel knife holder and E disposable blade holder
■External encloser is easy to clean,no need to unload
■Large waste tray,easy to unload
Technical Specifications:
■Section thickness range: 0.25~100μm
0. 5~2μm increment 0. 5μm
2~10μm increment 1μm
10~20μm increment 2μm
20~100μm increment 5μm
■Trimming thickness range:0~100μm
■Minimum setting value: 0. 5μm
■Object feed: 26mm
■Vertical stroke: 52mm
■Maximum specimen size: 60 x 50mm
■Precision error: ±5%
■Working Voltage: AC220V 50Hz / AC110V 60Hz
■Power draw:50VA
■Dimension: 540x400x290mm
■Net weight:28kg
KD-2258-Ⅲ Rotary Microtome+Fast Freezing machine
This model combime KD-2258
Rotary Microtome and KD-III fast
freezing machine.KD-III adopt
high-power semi-conductor freezing
system and advanced nano
meterial.LCD shows setting and
current temperature,self-temperature
control,self-protection systems an
defrost fuction etc.
This model adopt streamline
design,advanced fuction,stable
performance,user-friendly.Specimen
feed drive is controled by intelligent
control system..Precise electrical
mechanical design,Ergonomic
concept.
Technical Specifications:
■ Section thickness range:0.5~60μm
■ Setting value:0.5~2μm increment 0.5μ
2~10μm increment 1μm
10~20μm increment 2μm
20~60μm increment 5μm
■ Trimming thickness range: 1~60μm
■ Precision error: ±5%
■ Minimum setting value: 0.5μm
■ Object feed: 28mm
■ Vertical stroke: 60mm
■ Maximum specimen size: 60 x 50mm
■ Specimen return range: 0~28mm
■Pre-setting temperature range: ambient~-55℃
■ Maximum temperature range for Cryo-plate ≥60℃
■Maximum temperature range for Cryo-probe: ≥50℃
■ Maximum size of Cryo-pate: 45 x 40mm
■ Pre-setting and current temperature shown in LCD
■ Best section angle between Cryo-proble and section blade is 60 degrees
■Temperature of defrost display,pre-setting temperature can be stored itself afte working
■Temperature of section can be reached after freezing within 4~7 minutes
■Dual fuction section: freezing and paraffin use
■Working Voltage:AC220V 50Hz , AC110V 60Hz
■ Power draw:300VA
■ Dimension:500x460x300mm(KD-2258),420x190x410mm(KD-Ⅲ)
■ Net weight:23.3kg(KD-2258), 8kg(KD-Ⅲ)
KD-2258 Manual Microtome
This model is specially developed
for modern histopatholgy research.
It adopt imported guide ways,ideal
devise,stable performance,ergonomic
concept,and it's new development
direction of histopathology research.
Features:
■ Ergonomical conception of
devise,no feeling of tire for routine
operation
■Good section result whether by
use of Standard Steel Knife or
Disposable Blade
■ Specimen clamp positioned at
8 X/Y precision orientation system
■ Handweel system allow the handwheel locked at any position
■ Specimen block can be changed easily and conveniently
■ Blade holder can be moved horizontal or vertical,no need to touch the blade
■ N Steel knife holder and E disposable blade holder
■ External encloser is easy to clean,no need to unload
■ Large waste tray,easy to unload
Technical Specifications:
■ Section thickness range:0.5~60μm
■ Setting value: 0.5~2μm increment 0.5μ
2~10μm increment 1μm
10~20μm increment 2μm
20~60μm increment 5μm
■ Trimming thickness range: 1~60μm
■ Minumum Setting value:0.5μm
■ Precision Error:±5%
■ Maximum Specimen Size:60x50mm
■ Object Feed: 28,Vertical Stroke: 60mm
■ Speciment return range: 0~28mm
■ Dimension: 500mx460mm x300mm
■ Net Weight: 23.3kg
KD-2508-Ⅲ Rotary Microtome+Fast Freezing machine
This model combime KD-2508 Rotary Microtome and KD-III fast freezing machine.KD-III adopt
high-power semi-conductor freezing system and advanced nano meterial.LCD shows setting and current
temperature,self-temperature control,self-protection systems an defrost fuction etc.
This model adopt streamline design,advanced fuction,stable performance,user-friendly.Specimen feed
drive is controled by intelligent control system..Precise electrical mechanical design,Ergonomic concept.
■ Section thickness range:1~25μm ,1~35μm
■ Minimum setting value: 1μm
■ Precision error: ±5%
■ Maximum specimen size: 60 x 40mm
■Dural purpose of blade holder,high profile blade or low profile blade can be changed
■ Steel knife holder or disposable blade holder can be changed
■ Pre-setting temperature range: ambient~-55℃
■ Maximum temperature range for Cryo-plate ≥60℃
■ Maximum temperature range for Cryo-probe: ≥50℃
■ Maximum size of Cryo-pate: 45 x 40mm
■ Pre-setting and current temperature shown in LCD
■Best section angle between Cryo-proble and section blade is 60 degrees
■ Temperature of defrost display,pre-setting temperature can be stored itself afte working
■Temperature of section can be reached after freezing within 4~7 minutes
■ Dual fuction section: freezing and paraffin use.
■ Working voltage:AC200V 50Hz、AC110V 60Hz
■ Power draw:300VA
■ Dimension:450x320x320mm (KD-2508), 420x190x410mm (KD-Ⅲ)
■ Net weight:19kg(KD-2508) 8kg(KD-Ⅲ)
KD-2508 Manual Microtome
This model Microtome adopt advanced,imported guide ways,ideal devise,high precision,stable
performance,easy to operation.It is good choice for histology or cytology research.
Technical specifications:
■Section thickness range: 1~25,1~35
■Minumum setting value: 1um
■Precision error: ±5%
■Maximum specimen size: 60 x 40mm
■Dural purpose of blade holder,high profile blade or low profile blade can be changed
■Steel knife holder or disposable blade holder can be changed
■Dimension: 450x320x320mm
■Net weight: 19kg
KD-1508R-Ⅲ Rotary Microtome+Fast Freezing machine
This model combime KD-1508R Rotary Microtome and KD-III fast freezing machine.KD-III adopt
high-power semi-conductor freezing system and advanced nano meterial.LCD shows setting and current
temperature,self-temperature control,self-protection systems an defrost fuction etc.
This model adopt streamline design,advanced fuction,stable performance,user-friendly.Specimen feed
drive is controled by intelligent control system..Precise electrical mechanical design,Ergonomic concept.
Technical Specifications:
■ Section thickness range: 1~35μm
■ Minimum setting value: 1μm
■ Precision error: ±5%
■ Maximum specimen size: 60 x 40
■Dural purpose of blade holder,high profile blade or low profile blade can be changed
■ Steel knife holder or disposable blade holder can be changed
■ Pre-setting temperature range: ambient~-55℃
■ Maximum temperature range for Cryo-plate ≥60℃
■ Maximum temperature range for Cryo-probe: ≥50℃
■ Maximum size of Cryo-pate: 45 x 40mm
■ Pre-setting and current temperature shown in LCD
■Best section angle between Cryo-proble and section blade is 60 degrees
■Temperature of defrost display,pre-setting temperature can be stored itself afte working
■Temperature of section can be reached after freezing within 4~7 minutes
■ Dual fuction section: freezing and paraffin use
■ Working voltage:AC200V 50Hz、AC110V 60Hz
■ Power draw:300VA
■ Dimension:470x320x320mm (KD-1508), 420x190x410mm (KD-Ⅲ)
■ Net weight:22.5kg(KD-2508) 8kg(KD-Ⅲ)
KD-1508R Rotary Microtome
This model microtome is developed based on KD-1508A,1508model.It adopt advanced precise guide
rail technics and high-strength alloy steel material.It specially used to cut
fiber,plastic,rubber,bone,plant,feather and other hard specimen block.
Technical Specifications:
■Section thickness setting range: 1~35um
■Maximum specimen size: 60 x40mm
■Minimum setting value: 1um
■Precision error: ±5%
■Dimension: 470x320x320mm
■Net weight: 22.5kg
KD-1508A-Ⅲ Rotary Microtome+Fast Freezing machine
This model combime KD-1508A Rotary Microtome and KD-III fast freezing machine.KD-III adopt
high-power semi-conductor freezing system and advanced nano meterial.LCD shows setting and current
temperature,self-temperature control,self-protection systems an defrost fuction etc.
This model adopt streamline design,advanced fuction,stable performance,user-friendly.Specimen feed
drive is controled by intelligent control system..Precise electrical mechanical design,Ergonomic concept.
Technical Specifications:
■ Section thickness range:1~35μm, >35μm section range can be adjusted freely
■ Minimum setting value: 1μm
■ Precision error: ±5%
■ Maximum specimen size: 50 x 40mm
■ Pre-setting temperature range: ambient~-55℃
■ Maximum temperature range for Cryo-plate ≥60℃
■ Maximum temperature range for Cryo-probe: ≥50℃
■ Maximum size of Cryo-pate: 45 x 40mm
■ Pre-setting and current temperature shown in LCD
■Best section angle between Cryo-proble and section blade is 60 degrees
■ Temperature of defrost display,pre-setting temperature can be stored itself afte working
■Temperature of section can be reached after freezing within 4~7 minutes
■ Dual fuction section: freezing and paraffin use
■ Working voltage:AC220V 50Hz、AC110V 60Hz
■ Power draw:300VA
■ Dimension:470x320x320mm(KD-1508A),420x190x410mm(KD-Ⅲ)
■ Net weight:22.5kg(KD-1508A) 8kg(KD-Ⅲ)
KD-1508A Manual Microtome
KD-1508A Rotary microtome adopt advanced guide ways,high-strength alloy steel materials,ideal
devise.It's very suitable for rearch in cutting fiber,plastic,bone,plant,hair and other hard specimens.
Technical specifications:
■ Section thickness range 1~35um, >35μm section range can be adjusted freely
■ Maximum specimen size: 50 x 40mm
■ Minimum setting value: 1 um
■ Precision error: ±5%
■ Dimension: 470x320x320mm
■ Net weight: 22.5kg
KD-202A-Ⅲ Rotary Microtome+Fast Freezing machine
This model combime KD-202A Rotary Microtome and KD-III fast freezing machine.KD-III adopt
high-power semi-conductor freezing system and advanced nano meterial.LCD shows setting and current
temperature,self-temperature control,self-protection systems an defrost fuction etc.
This model adopt streamline design,advanced fuction,stable performance,user-friendly.Specimen feed
drive is controled by intelligent control system..Precise electrical mechanical design,Ergonomic concept.
Technical Specifications:
■ Section thickness range:1~25μm, >25μm section range can be adjusted freely
■ Minimum setting value: 1μm
■ Precision error: ±10%
■ Easy to operate,clean external encloser
■ Display of numbers of specimen section,emergency-stop system
■ Maximum specimen size: 40 x 30mm
■ Pre-setting temperature range: ambient~-55℃
■ Maximum temperature range for Cryo-plate ≥60℃
■ Maximum temperature range for Cryo-probe: ≥50℃
■ Maximum size of Cryo-pate: 45 x 40mm
■ Pre-setting and current temperature shown in LCD
■Best section angle between Cryo-proble and section blade is 60 degrees
■ Temperature of defrost display,pre-setting temperature can be stored itself afte working
■Temperature of section can be reached after freezing within 4~7 minutes
■ Dual fuction section: freezing and paraffin use.
■ Working voltage:AC220V 50Hz、AC110V 60Hz
■ Power draw:300VA
■ Dimension:380x340x270mm(KD-202A)
420x190x410mm(KD-Ⅲ)
■ Net weight:21.5kg(KD-202A) 8kg(KD-Ⅲ)
KD-202A Manual Microtome
This model is simple rotary microtome,handwheel locked at top of it,paraffin block can be changed
easily and safe.LCD shows numbers of sectioning,emergency stop systems.Clean encloser,blade holder can
be moved horizontal or vertical.
Technical specifications:
■Section thickness range: 1~25 um , >25μm
■Minimum setting value: 1um
■Maximum specimen size: 40 x 30mm
■Precision error: ±10%
■Dimension: 380x340x270mm
■Net weight: 21.5kg
KD-202-Ⅲ Rotary Microtome+Fast Freezing machine
This model combime KD-202 Rotary Microtome and KD-III fast freezing machine.KD-III adopt
high-power semi-conductor freezing system and advanced nano meterial.LCD shows setting and current
temperature,self-temperature control,self-protection systems an defrost fuction etc.
This model adopt streamline design,advanced fuction,stable performance,user-friendly.Specimen feed
drive is controled by intelligent control system..Precise electrical mechanical design,Ergonomic concept.
Technical Specifications:
■ Section thickness range: 1~25μm
■ Minimum setting value: 1μm
■ Precision error: ±10%
■ Maximum specimen size: 35 x 25mm
■ Pre-setting temperature range: ambient~-55℃
■ Maximum temperature range for Cryo-plate ≥60℃
■ Maximum temperature range for Cryo-probe: ≥50℃
■ Maximum size of Cryo-pate: 45 x 40mm
■ Pre-setting and current temperature shown in LCD
■Best section angle between Cryo-proble and section blade is 60 degrees
■ Temperature of defrost display,pre-setting temperature can be stored itself afte working
■Temperature of section can be reached after freezing within 4~7 minutes
■ Dual fuction section: freezing and paraffin use.
■ Working voltage:AC220V 50Hz、AC110V 60Hz
■ Power draw:200VA
■ Dimension:290x300x220mm(KD-202)
420x190x410mm(KD-Ⅲ)
■ Net weight:21kg(KD-202) 8kg(KD-Ⅲ)
KD-202 Manual Microtome
This model is very simple,typical rotary microtome,it adopt crank driving system,ratchat feeding
mechanics and continuous sectioning fuction etc.
Technical specifications:
■Section thickness range: 1~25 um
■Minimum setting value: 1um
■Maximum specimen size: 35 x 25mm
■Precision error: ±10%
■Dimension: 290x300x220mm
■Net weight: 21kg
KD-400 Vibrating Microtome
This model is specially developed according to market demand,it introduce advanced technics from
overseas.It is widely used in biological,teaching,scientific institute research etc.It is used to cut fresh or
specific specimen from animals or plants,specimen can be cut immediately in no case of embedding,cooling
progress.Therefore,specimen doesn't broke at all,and cell keep very good and active.It provide good
condition for immunocytochemistry research and spinal&celebrum disorder's neurobiology. This model is
very good choice for fiields in electro microscope,dissect, cyemology,physiology,biology,scientific research.
According to finding result from related college or scientific institue,10um is minimum section setting
range when cutting brain or spinal cord specimen.And,30um when cutting fresh brain,heart,kidney specimen.
Technical Specifications:
■Speed of Specimen Sectioning: 0-1.3mm/s(adjustable)
■ Vibrating range: 0~1mm
■ Specimen table lifting range: 9mm
■ Section thickness setting range: >10um
■ Minimum setting value: 1um
■ Angle of blade: 15degrees
■Working Voltage:AC220V 50Hz
AC110V 60Hz
■ Power Draw:200VA
■ Dimension:400x220x300mm
■ Net Weight:12kg
KD-BMR Paraffin Dispenser
Features:
■The full automatic procedure control&new heating element gives feature of quick heating&energy
saving
■The temperature survey integration block from American DALLAS Corporation has been used to
make it precise in temperature survey and credible in performance
■It possesses the function of memorization to keep the set temperature automatically after startup
■ The LED shows heating state
Technical Specifications:
■ Range of temperature:ambient~100℃
■ Precision:±1%
■ Voltage:AC220V 50HZ
AC110V 60 HZ
■ Power : 1200VA
■ Capacity: 10000ml
■ Overall dimension:350x450x510mm
■ Net Weight:17kg
KD-BM & BL Tissue Embedding & Cooling System
Features:
■ The full
automatic procedure
control can make it
possible for presetting
the start time of any
weekday in one week
■ The odd
controlling-microprocess
or from American
ATMEL Corporation has
been used to make it
easy to control
temperature and the
shining tube has been
used to display the
temperature so that we
can clearly know the
working state
■ Five heating zones, paraffin tank、dispensor、 left tank 、 right tank 、working area , can work
independent without interference
■ The temperature survey integration block from American DALLAS Corporation has been used to
make it precise in temperature survey and credible in performance. It is safe by employing the dual
overheat-avoidance devices to protect the heating system
■ It possesses the function of memorization to keep the set temperature automatically after startup
■ Tissue embedding system and cooling plate can use seperately or combined at your option
■ Heating working area and forcep holder is convenient to embed the tissue
■ Large working aera is convenient to clean paraffin
Technical specifications:
■The advanced heating theory to keep the paraffin on ideal temperature 70℃ to avoid paraffin shrink
and affect the tissue specimen
■Range for setting temperature of the forceps holder:55~70℃
■Range for setting temperature of the paraffin tank:55~70℃
■Range for setting temperature of the reservior:55~70℃
■Range for setting temperature of the working area:55~70℃
■Range for setting temperature of the dispensor:55~70℃
■Temperature control precesion:±1%
■Way of paraffin flow:soft touch manual switch、foot switch
■Time presetting: presetting the start time of any weekday during one week
■Working temperature of the Cooling plate : room temperature~-20℃
■Norminal voltage :AC220V 50Hz ,AC110V 60Hz
■Power draw:1000VA
■Demension:550x500x360mm(KD-BM),345x500x360mm(KD-BL)
■Weight:28kg(KD-BM) ,25kg(KD-BL)
KD-BM Tissue Embedding Center
Features:
■The full automatic procedure
control can make it possible for
presetting the start time of any
weekday in one week
■ The odd
controlling-microprocessor from
American ATMEL Corporation has
been used to make it easy to control
temperature and the shining tube
has been used to display the
temperature so that we can clearly
know the working state
■Five heating zones, paraffin
tank、dispensor、 left tank 、 right
tank 、working area , can work independent without interference
■The temperature survey integration block from American DALLAS Corporation has been used to
make it precise in temperature survey and credible in performance. It is safe by employing the dual
overheat-avoidance devices to protect the heating system
■It possesses the function of memorization to keep the set temperature automatically after startup
■Tissue embedding system and cooling plate can use seperately or combined at your option
■Heating working area and forcep holder is convenient to embed the tissue
■Large working aera is convenient to clean paraffin
Technical specifications:
■The advanced heating theory to keep the paraffin on ideal temperature 70℃ to avoid paraffin shrink
and affect the tissue specimen
■ Range for setting temperature of the forceps holder:55~70℃
■ Range for setting temperature of the paraffin tank:55~70℃
■ Range for setting temperature of the reservior:55~70℃
■ Range for setting temperature of the working area:55~70℃
■ Range for setting temperature of the dispensor:55~70℃
■ Temperature control precesion:±1%
■ Way of paraffin flow:soft touch manual switch、foot switch
■Time presetting: presetting the start time of any weekday during one week
■ Norminal voltage :AC220V 50Hz,AC110V 60Hz
■ Power draw:1000VA
■ Demension:550x500x360mm(KD-BM)
■ Weight:28kg(KD-BM)
KD-BMII & BL Tissue Embedding & Cooling System
Features:
■ The full automatic
procedure control can make
it possible for presetting the
start time of any weekday in
one week
■ The odd
controlling-microprocessor
from American ATMEL
Corporation has been used
to make it easy to control
temperature and the shining
tube has been used to
display the temperature so
that we can clearly know the
working state
■ Five heating zones, paraffin tank、dispensor、 left tank 、 right tank 、working area , can work
independent without interference
■The temperature survey integration block from American DALLAS Corporation has been used to
make it precise in temperature survey and credible in performance. It is safe by employing the dual
overheat-avoidance devices to protect the heating system
■ It possesses the function of memorization to keep the set temperature automatically after startup
■ Tissue embedding system and cooling plate can use seperately or combined at your option
■Big paraffin tank ensure dealing with all the tissue in one time
■ Low illumating system , safe & stable
■ Heating working area and forcep holder is convenient to embed the tissue
■ Large working aera is convenient to clean paraffin
Technical specifications:
■The advanced heating theory to keep the paraffin on ideal temperature 70℃ to avoid paraffin shrink
and affect the tissue specimen
■Range for setting temperature of the forceps holder:55~70℃
■Range for setting temperature of the paraffin tank:55~70℃
■Range for setting temperature of the reservior:55~70℃
■Range for setting temperature of the working area:55~70℃
■Range for setting temperature of the dispensor:55~70℃
■ Temperature control precesion:±1%
■Way of paraffin flow:soft touch manual switch、foot switch
■Time presetting: presetting the start time of any weekday during one week
■Working temperature of the Cooling plate : room temperature~-20℃
■Norminal voltage :AC220V 50Hz ,AC110V 60Hz
■Power draw:1000VA
■Demension:550x550x360mm(KD-BMⅡ), 345x500x360mm(KD-BL)
■Weight:30kg(KD-BMⅡ) ,25kg(KD-BL)
KD-BMⅡ Tissue Embedding Center
Features:
■ The full automatic
procedure control can make it
possible for presetting the
start time of any weekday in
one week
■ The odd
controlling-microprocessor
from American ATMEL
Corporation has been used to
make it easy to control
temperature and the shining
tube has been used to display
the temperature so that we
can clearly know the working
state
■ Five heating zones,
paraffin tank、dispensor、 left tank 、 right tank 、working area , can work independent without interference
■ The temperature survey integration block from American DALLAS Corporation has been used to
make it precise in temperature survey and credible in performance. It is safe by employing the dual
overheat-avoidance devices to protect the heating system
■It possesses the function of memorization to keep the set temperature automatically after startup
■ Tissue embedding system and cooling plate can use seperately or combined at your option
■ Big paraffin tank ensure dealing with all the tissue in one time
■ Low illumating system , safe & stable
■ Heating working area and forcep holder is convenient to embed the tissue
■ Large working aera is convenient to clean paraffin
Technical specifications:
■The advanced heating theory to keep the paraffin on ideal temperature 70℃ to avoid paraffin shrink
and affect the tissue specimen
■ Range for setting temperature of the forceps holder:55~70℃
■ Range for setting temperature of the paraffin tank:55~70℃
■ Range for setting temperature of the reservior:55~70℃
■ Range for setting temperature of the working area:55~70℃
■ Range for setting temperature of the dispensor:55~70℃
■ Temperature control precesion:±1%
■ Way of paraffin flow:soft touch manual switch、foot switch
■ Time presetting: presetting the start time of any weekday during one week
■ Norminal voltage :AC220V 50Hz,AC110V 60Hz
■ Power draw:1000VA
■ Demension:550x550x360mm(KD-BMⅡ)
■ Weight:30kg(KD-BMⅡ)
KD-BMIII、BLIII、BC Tissue Embedding & Cooling System
Features:
■ The full automatic procedure control can make it possible for presetting the start time of any
weekday in one week
■ The new rubber silcon calorific material has been used to make it heat up quickly and heated equally,
and energy-saving
■ The temperature survey integration block from American DALLAS Corporation has been used to
make it precise in temperature survey and credible in performance. LCD displays working state with icon
■ Five heating zones, paraffin tank、dispensor、 left tank 、 right tank 、working area , can work
independent without interference with five temperature control line , servel overheat-avoidance devices to
protect the heating system
■ It possesses the function of memorization to keep the set temperature automatically after startup
■ Tissue embedding system, cooling plate and conservation table can use seperately or combined at
your option
■ Heating working area and forcep holder is convenient to embed the tissue
■ New frequency conversion compressor used in cooling plate to adjust the temperature freely to
adjust between +50℃~-35℃
■ The cooling spot on embeding center can refrigerate the tissue specimen immdiately
■ Large voulmn paraffin tank ensure the capacity to finish work one time
■ Low voltage illuminating system for safty operation , two startup model : manua and foot switch
■ Large working aera is convenient to clean paraffin
■ Precise in time display, and it is simple for timing
Technical specifications:
■ Adopted advanced heating theory
■ Volume of paraffin tank:5 liters
■ Range of temperature-control of forcep holder :ambient~99℃
■ Range of temperature in paraffin tank :ambient~99℃
■ Range of temperature in storing box: ambient~99℃
■ Range of temperature at workstation: ambient~99℃
■ Range of tempreature of heating system: ambient~99℃
■ Tolerance:±1%
■ Mode of wax-flow:automatic soft-touching manual switch 、foot switch
■ Time presetting: presetting the start time of any weekday during one week
■ Temperature of cooling -plate:ambient ≤-20℃,protection function of time delay
■ Dimension of cooling plate:330 x 322mm
■ Niminal Voltage:AC220V 50Hz AC110V 60Hz
■ Power draw: 800VA(KD-BMⅢ),100VA(KD-BLⅢ),150VA(KD-BC)
■ Dimension: 650x580x450mm(KD-BMⅢ),652x380x425mm(KD-BLⅢ) 602x380x425mm(KD-BC)
■ Weight: 29kg(KD-BMⅢ) 20kg(KD-BLⅢ) 12kg(KD-BC)
KD-BMIII、BLIII Tissue Embedding & Cooling System
Features:
■ The full automatic
procedure control can make it
possible for presetting the start
time of any weekday in one
week
■ The new rubber silcon
calorific material has been used
to make it heat up quickly and
heated equally, and
energy-saving
■ The temperature survey
integration block from American
DALLAS Corporation has been
used to make it precise in
temperature survey and credible
in performance. LCD displays
working state with icon
■ Five heating zones, paraffin tank、dispensor、 left tank 、 right tank 、working area , can work
independent without interference with five temperature control line , servel overheat-avoidance devices to
protect the heating system
■It possesses the function of memorization to keep the set temperature automatically after startup
■Tissue embedding system, cooling plate and conservation table can use seperately or combined at
your option
■ Heating working area and forcep holder is convenient to embed the tissue
■New frequency conversion compressor used in cooling plate to adjust the temperature freely to adjust
between +50℃~-35℃
■The cooling spot on embeding center can refrigerate the tissue specimen immdiately
■ Large voulmn paraffin tank ensure the capacity to finish work one time
■Low voltage illuminating system for safty operation , two startup model : manua and foot switch
■ Large working aera is convenient to clean paraffin
■ Precise in time display, and it is simple for timing
Technical specifications:
■ Adopted advanced heating theory
■ Volume of paraffin tank:5 liters
■ Range of temperature-control of forcep holder :ambient~99℃
■ Range of temperature in paraffin tank :ambient~99℃
■ Range of temperature in storing box: ambient~99℃
■ Range of temperature at workstation: ambient~99℃
■ Range of tempreature of heating system: ambient~99℃
■ Presion error:±1%
■ Mode of wax-flow:automatic soft-touching manual switch 、foot switch
■ Time presetting: presetting the start time of any weekday during one week
■ Temperature of cooling -plate:ambient ≤-20℃,protection function of time delay
■ Dimension of cooling plate:330 x 322mm
■ Niminal Voltage: AC220V 50Hz AC110V 60Hz
■ Power draw: 800VA(KD-BMⅢ),100VA(KD-BLⅢ)
■ Dimension: 650x580 x450mm(KD-BMⅢ),652x380 x425mm(KD-BLⅢ)
■ Weight: 29kg(KD-BMⅢ) 20kg(KD-BLⅢ)
KD-BMIII Tissue Embedding Center
Features:
■ The full automatic
procedure control can make
it possible for presetting
the start time of any
weekday in one week
■ The new rubber
silcon calorific material has
been used to make it heat
up quickly and heated
equally, and energy-saving
■ The temperature
survey integration block
from American DALLAS
Corporation has been used
to make it precise in
temperature survey and
credible in performance.
LCD displays working
state with icon
■Five heating zones,
paraffin tank、dispensor、 left tank 、 right tank 、working area , can work independent without interference
with five temperature control line , servel overheat-avoidance devices to protect the heating system
■ It possesses the function of memorization to keep the set temperature automatically after startup
■ Tissue embedding system, cooling plate and conservation table can use seperately or combined at
your option
■ Heating working area and forcep holder is convenient to embed the tissue
■ New frequency conversion compressor used in cooling plate to adjust the temperature freely to
adjust between +50℃~-35℃
■ The cooling spot on embeding center can refrigerate the tissue specimen immdiately
■ Large voulmn paraffin tank ensure the capacity to finish work one time
■Low voltage illuminating system for safty operation , two startup model : manua and foot switch
■ Large working aera is convenient to clean paraffin
■ Precise in time display, and it is simple for timing
Technical specifications:
■ Adopted advanced heating theory
■ Volume of paraffin tank:5 liters
■ Range of temperature-control of forcep holder :ambient~99℃
■ Range of temperature in paraffin tank :ambient~99℃
■ Range of temperature in storing box: ambient~99℃
■ Range of temperature at workstation: ambient~99℃
■ Range of tempreature of heating system: ambient~99℃
■ Presion error:±1%
■ Mode of wax-flow:automatic soft-touching manual switch 、foot switch
■ Time presetting: presetting the start time of any weekday during one week
■Temperature of cooling -plate:ambient ≤-20℃,protection function of time delay
■ Dimension of cooling plate:330 x 322mm
■ Niminal Voltage: AC220V 50Hz
AC110V 60Hz
■ Power draw: 800VA(KD-BMⅢ)
■ Dimension: 650x580 x450mm(KD-BMⅢ)
■ Weight: 29kg(KD-BMⅢ)
KD-BLⅢ Cryo-Plate
KD-BLIII Cryo-plate adopted with new-type inverter
compressor ,which makes tissue paraffin cooled quickly,
teflon plating ensure easy cleaning,cooling temperature can
be adjusted freely,temperature is setted properly to avoid
tissue wax from not cooling enough or frost splitting,KD-BL
Ⅲcryo-plate can be use seperately.
Technical specifications:
■ Setting temperature:+50℃~-35℃
■ Protection requirement of time delay
■ Area of cryo-plate:330x322mm
■ Voltage: AC220V 50Hz
AC110V 50Hz
■ Power:100VA
■ Dimension:652x380x425mm
■ Weight:20kg
KD-BC Tissue Conserving Table
KD-BC conserve any-type tissue embedding
cassette,embedding box,embedding mould and tissue
which was processed;high-capacity,easy for storage,this
instrument can be operated seperately,also used for tissue
speading.
Technical specifications:
■ Setting temperature:ambient ~90℃
■ Protection requirement of time delay
■ Volume:4.5 liter
■ Voltage:AC 220V 50 Hz
AC 110V 50Hz
■ Power:150VA
■ Dimension:602x380x425mm
■ Weight :12kg
KD-T Tissue Flotation Workstation
Features:
■ Adopted with ATMEL
microprocessor technique,
New heating material
■ The new design is
unique and compact combining
with wather bath & hot plate .
It is easy on operation , stable
on function , light&small
■ General used for
pathological research in
hospital, medical college,
sanitation division etc
Technical specifications:
■ Range of spreading temperature of water: ambient to 90℃ (constant adjusting)
■ Range of roasting temperature: ambient to 90℃ (constant adjusting)
■Self memory of presetting temperature after running instrument
■ Allowance ambient temperature: 0 - 40℃
■ Working voltage: 220 V /50 Hz
■ Power: < 500 W
■ Dimensions overall: 550 x 400 x 120 mm
■ Weight: 13 kg
KD-TH1 Tissue Flotation Workstation
Features:
■ Broad LCD, indicating the heating state with icon
to show clearly , easy operation
■ The new PTC calorific material has been used to
make it heat up quickly and heated equally, small in the
heat inertia for energy-saving
■ The temperature survey integrated block from
American DALLAS Corporation has been used to make it
precise in temperature survey and credible in performance
■ Spreading bath,roasting plate is controlled
seperately,work independent without affect each other
■Automatical memorization and recover,resetting temperature stored as the intrument start to work
■ Adopted with LED tech,good light transmission,convex lens reflex easily,low voltage,low
energy-consumption
■Speading processing can't be affected by light ray/sunlight,you can find anywhere for observing
specimen
Technical specifications:
■ Temperature range of instrument :ambient~99℃
■ Precison :±1℃
■ Size of spreading bath: 259x140x65 mm(inner)
■ Size of baking plate: 110x70mm
■ Size of roasting plate: 140x70mm
■ Voltage: AC220V 50HZ
AC110V 60Hz
■ Power: 200 VA
■ Dimension: 370x440x140mm
■ Weight: 6.0kg
KD-P Water Bath
Features:
■ New heating material is
Heat conduct fast, durable,
energy-saving
■ Display presetting
temperature & current
temperature
■ Self memory of set
temperature after running
■ Corrosion-resistance of
the bath
Technical specifications:
■ Range of setting temperature: ambient to 90℃(constant adjusting)
■ Temperature tolerance: + 1℃
■ Allowance ambient temperature: 0 - 40℃
■ Working voltage: AC 220V 50Hz
AC110V 60Hz
■ Power: 200 VA
■ Dimensions overall: 340 x 340 x 120 mm
■ Weight: 6 kgs
KD-H Hot Plate
Features:
■ New heating material
is Heat conduct fast, durable,
energy-saving
■ Display presetting
temperature & current
temperature
■ Self memory of set
temperature after running
■ Corrosion-resistance
of the bath
Technical specifications:
■ Range of setting temperature: ambient to 90℃ (constant adjusting)
■ Temperature tolerance: + 1℃
■ Allowance ambient temperature: 0 - 40℃
■ Working voltage: AC 220V 50Hz
AC110V 60Hz
■ Power: 200 VA
■ Dimension: 340 x 340 x 120 mm
■ Weight: 6 kg
KD-XF Histo-Trimmer
Features:
■ The full automatic procedure
control&new heating element gives feature of
quick heating&energy saving
■ The temperature survey integration
block from American DALLAS Corporation
has been used to make it precise in temperature
survey and credible in performance
■ It possesses the function of
memorization to keep the set temperature
automatically after startup
■The LED shows heating state
Technical Specifications:
■Range of temperature:ambient~90℃
■Precision :±1%
■Voltage:220V±10%50HZ
■Power : 150VA
■Size of Table:230x160mm
■Overall dimension:260(L)x185(W)x155(H)mm
■Net Weight:2kg
KD-TR Dual purpose for Tissue processor and Tissue Dyeing Processor
Features:
■ Dual purpose use for Tissue processor and Tissue Dyeing Processor,save space and reagent
■ The intelligent design can identify abnormal situation automatically
■ Bilingual LCD display , 20 sets program for tissue processor , 4 sets program for tissue dyeing
processor
■ Enviroment-friendly inner circulating air cleaning system,exaust harmful gas
■ Waterless inner heating,high precision of controlling
■ Power off self protection function makes it continue working after power off and unaffect the tissue
specimen
■ Flexible transmission is noiseless and stable . Imported parts and material ensure the good quality
Technical specifications:
■ Total stations: 16( 12 reagent station , three roasting station the 14st 15,16,one cleaning station)
■Tissue Processing time of each stations : 0s 99 hrs for station 0-24 for other tanks(2-6,11-6)
■Tissue dyeing process time : 1~14 stations:0~59min59s adjustable
■Paraffin tank temperature : ambient ~80°adjustable
■ Heating method: waterless heating
■Capacity of stations: 180mmx40 mmx100 mm
■ Specimen process: 40 pcs for tissue processor ,52 specimens for tissue dyeing processor
■ Temperature tolerance: ±1℃
■ Stir frequency : 0~6 times/min
■Power off protection : ( continue working >6 hours without outer battery), protection station: No.11
■ Working voltage: AC220V 50Hz
AC110V 60Hz
■ Power Draw : 500VA
■ Overall dimensions: 1055 x 450 x 470 mm (L x W x D)
■ Weight: 75 kg
KD-TS1A Tissue Processor(small type)
Features:
■ APS engineering
plastics,high
intensity,anti-corrosion,strea
mline design,elegant
appearance,save reagent,low
cost,economical and work
well.
■Body of this machine
is small,convenient to
operate,it adopts monolithic computer controlling technics,complete fuction,body made of organic
glass,fuction of gas exhausting,good sealability,environment-friendly and safe
■ With a capacity of at least 40 pcs tissue can be processed one time
■ Work continue in case of instant power failure or switch off once machine is working
■No-water internal heating system,high precision of temperature controlling
■Two dimension soft driving sytems,low noise,resistant to wear
■High presision photoelectric register control system,stable performance,high presion positioning
■Intelligent design,instant identification in case of problems.Memory fuction in built-in procedure.
Technical Specifications:
■Number of stations: 12(9 reagent stations,3 paraffin stations)
■ Volume of station: 700ml
■ Time setting: 0~99hours(No. 1 station)
0~24hours(other stations)
■ Temperature pre-setting range: ambient~99degrees
■ Leach liquor time: approx. 30seconds
■ Tissue protecting station: No.7 station
■ Working voltage: AC 220V , 50Hz / 110V ,60Hz
■ Power draw:500 VA
■ Heating control: heating start when basket goes into No.2 station,energy-saving
■ Dimension: 1000x450x420 mm
■ Net weight: 75kg
KD-RS1 Tissue Dyeing Processor
Features:
■ High-definition &
sensitive of touch LCD ,
effective, convenient
■ Broad screen touch
LCD 、 with man-machine
dialogue inerface , prompt
identifying can be made in
abnormal situation to make
sure each operation can be
indicated(online
help),synchronous animation
show the present working process clearly
■ Randomly setting start-up time and automatically showing finish time,make sure task is finished in
stipulated time
■ There is four sets program and can check online
■ Intellectualized infall, outfall & drainage system make sure the water is clean for every step
■ 36 immersion steps can be set , mistakbe alarm function
■ Enviroment-friendly inner circulating air cleaning system,exaust harmful gas
■ 18 stations , the 10th station is cleaning, the first station is roasting station
■ 0-30s adjustable shaking , leachate time reduce the reagent mix chance thus prolong reagent use
time and make the working surface clear
Technical specifications:
■ Total stations: 18(cleaning bath ,the 10th ;roasting bath ,the 1st )
■ Capacity of stations: 100x180x40mm
■ Specimen process: 52 pc
■ Processing time of each stations : 0s 59 min and 59 s
■ leachate time on tank shafting: 0-30S adjustable ( shaking above the station)
■Working voltage: AC220V 50Hz,AC110V 60Hz
■ Power Draw : 500VA
■ Overall dimensions: 1170 x 450 x 4070 mm (L x W x D)
■ Weight: 88kg
KD-RS Tissue Dyeing Processor
Features:
■ High-definition & sensitive
of touch LCD , effective,
convenient
■ Unique design for dyeing
process comply with ergonomic
principle , satisfying the customer
■ Flexible transmission is
noiseless and stable . Imported parts
and material ensure the good quality
■ Intellectualized infall, outfall & drainage system make sure the water is clean for every step
■ Special dyeing shelf loading with decades of specimen , covenient , safe and environmental
protection
■ Streaming water cleaning & tissue roasting function
Technical specifications:
■ Total stations: 14( 12 reagent station , cleaning bath ,the 9th ;roasting bath ,the 1st )
■ Processing time of each stations : 0s 59 min and 59 s
■ Capacity of stations: 1 L
■ specimen process: 72 pc
■ Working voltage: AC220V 50Hz
AC110V 60Hz
■ Power Draw : 500VA
■ Overall dimensions: 1130 x 460 x 400 mm (L x W x D)
■ Weight: 85 kg
KD-TS3B Automatic Tissue Processor
Features:
■ The cover is elegent with fluent line and it is spraying with APS engineering plastic which has
high-intensity,anticorrosion function and easy to clean With key parts imported, it runs steadily without
noise and comply with theory of ergonomics
■ 20sets programme 、broad screen touch LCD、with man-machine dialogue inerface , prompt
identifying can be made in abnormal situation to make sure each operation can be indicated(online help),
synchronous animation show the present working process clearly
■ Environment-friendly inner circulated air cleaning system,adsorb、remove、decompose toxic and
harmful gas in the instrument
■ Randomly setting start-up time and automatically showing finish time,make sure task is finished in
stipulated time
■ 10~60s adjustable time of dropping liquid,shaking basket,and drop liquid above cylinder once
exchange cylinder to avoid liquid mix from one bath to another,in this way, service time of reagent can be
prolonged,aviod dirty on the table
■ 0~6times /min adjustable stirring times(0 shows no-stirring),make sure all tissues immersed
thoroughly,evenly,and completed enough
■ Once power-off,protecting cylinderNo.1~7 can be set,position of protecting cylinder can be
adjusted as required
■ Self-control fan,it automatically starts up once basket goes up;as basket goes downwards,fan works
10s per min
■ Self-control illuminating lamp,it starts up in programming;touch any key to prolong to 2 min as the
instrument is running
■ Waterless inner heating,high precision of controlling
■Low energy-consuming control circuit,self-protection once power-off;display panel is still illumed
and scrolling panel indicats it's self-protecting situation as power-off,and time of running is more than 30 H
■No less than 100 tissues can be processed one time
Technical specifications:
■ Numbers of station:12 (No.9 : reagent station,No.10、11、12 are wax dispensing station)
■ Volume of each station:1500ml
■Processsing time of each station: anytime (No.1 station),0~24 H (other station)
■Range of presetting temperature: ambient~80℃
■Time of exchange station、delay、leachate:10~60s (adjustable),and leachate 、basket shaking work
above station
■Tissue Protecting station :No.1~No.7 Cylinder(adjustable)
■ Voltage:AC220V 50Hz,AC110V 60Hz
■ Power:800VA ■ Dimension:1010x550x420 mm
■ Weight:80kg
KD-TS3A Automatic Tissue Processor
Features:
■The intelligent design gives the ability to deal with abnormal situation automatically
■The imported blue LCD is
clear & stable with several control
system
■ Recirculated atmosphere
depurative system that absorbing
unhealthy volatilization gas
■ Anhydrous heating element
with high accurancy
■UPS build-up, power backup
for continous working after power off
■ With key parts imported, it runs steadily without noise and comply with theory of ergonomics
Technical specifications:
■ Numbers of tanks: 12 ( 9 liquid tanks , 3 paraffin tanks)
■ Process time: 0~99 hrs for first tank , 0~24 hrs for other tanks
■Paraffin tank temperature: ambient temperature to 99℃, double protection
■ Heating Method: Waterless inner heating
■ Capacity : 1000ml
■ Temperature tolerance : ±1℃
■ Agitate times: 2/min
■ Power off protection ( it can working >6 hrs after power off )
■ Room temperature: 0~40℃
■ Working voltage: AC220V 50Hz
AC110V 60Hz
■ Power Draw: 800 W
■ Dimension: 1000 x 420 x 450 mm
KD-TS3D1 Automatic Tissue Processor (intelligent touch screen)
Features: ■ The cover is
elegent with fluent line and it is spraying with APS engineering plastic which has high-intensity,anticorrosion function and easy to clean With key parts imported, it runs steadily without noise and comply with theory of ergonomics
■ 20sets programme 、 broad screen touch LCD、with man-machine dialogue inerface , prompt identifying can be made in abnormal situation to make sure each operation can be indicated(online help)
■ The intelligent design gives the ability to deal with unnormal situation automatically ;The synchronous animation show the present working process clearly
■ Environment-friendly inner circulated air cleaning system,adsorb、remove、decompose toxic and harmful gas in the instrument
■ Randomly setting start-up time and automatically showing finish time,make sure task is finished in stipulated time
■ 10~60s adjustable time of dropping liquid,shaking basket,and drop liquid above cylinder once exchange cylinder to avoid liquid mix from one bath to another,in this way, service time of reagent can be prolonged,aviod dirty on the table
■ 0~6times /min adjustable stirring times(0 shows no-stirring),make sure all tissues immersed thorough,evenly,and completed enough
■ Once power-off,protecting cylinderNo.1~7 can be set,position of protecting cylinder can be adjusted as required
■ Self-control fan,it automatically starts up once basket goes up;as basket goes downwards,fan works 10s per min
■ Self-control illuminating lamp,it starts up in programming;touch any key to prolong to 2 min as the instrument is running
■ Waterless inner heating,high precision of controlling ■Low energy-consuming control circuit,self-protection once power-off;display panel is still illumed
and scrolling panel indicats it's self-protecting situation as power-off,and time of running is more than 30 H ■ It can manually add the tissue during the auto running mode. Customer can check and add the tissue
conveniently during operation process ■ No less than 150 tissues can be processed one time Technical specifications: ■Numbers of station:12 (No.9 : reagent station,No.10、11、12 are wax dispensing station) ■ Volume of each station:2000ml ■ Range of presetting temperature: ambient~80℃ ■ Temperature Tolerance: ±1℃ ■ Processsing time of each station: anytime (No.1 station),0~24 H (other station) ■Time of exchange station、delay、leachate:10~60s (adjustable),and leachate 、basket shaking work
above station ■Tissue Protecting station :No.1~No.7 Cylinder(adjustable) ■ Voltage: AC220V 50Hz、AC110V 60Hz ■ Power:1000VA ■ Dimension:1135x480x490 mm ■ Weight:88kg
KD-TS3D Automatic Tissue Processor(1.8 liter)
Features:
■ The cover is elegent with fluent line and it is spraying with APS engineering plastic which has
high-intensity,anticorrosion function
and easy to clean
■ Adopted bilingual LCD
operation system , several sets control
system , man-machine dialogue
inerface ; It is environmental protection
with organic glass cover, air extract
system and good sealing property
■ The intelligent design gives the
ability to deal with unnormal situation
automatically
■ The roll and page down LCD indicates every working step
■Randomly setting start-up time and automatically showing finish time,make sure task is finished in
stipulated time
■10~60s adjustable time of dropping liquid,shaking basket,and drop liquid above cylinder once
exchange cylinder to avoid liquid mix from one bath to another,in this way, service time of reagent can be
prolonged,aviod dirty on the table
■0~6times /min adjustable stirring times(0 shows no-stirring),make sure all tissues immersed
thorough,evenly,and completed enough
■Illumilating lamp and exhaust fan are intelligent control,the lamp only works for 3 min when the
instrument is at working situation,except from reset、upward keys;fan only works once cylinder goes upwards
or making programming,its working time is 10s per min
■Environment-friendly inner circulating air cleaning system,exaust harmful gas
■Waterless inner heating,high precision of controlling
■Low energy-consuming control circuit,self-protection once power-off;display panel is still illumed
and scrolling panel indicats it's self-protecting situation as power-off
■Adopted with imported components,run smoothly,no noise,comply with theory of ergonomics
■ More than 100 tissues can be processed one time
Technical specifications:
■Numbers of cylinder:12 (no.10、11、12 are wax dispensing cylinder)
■ Volume of each cylinder:1.8litre
■Processsing time of each cylinder: anytime(No.1 cylinder) ,0~24 H (other cylinder)
■ Time of exchange cylinder、delay、leachate:10~60s (adjustable),and leachate 、basket shaking
work above cylinder
■ Voltage:AC220V 50Hz、AC110V 60Hz
■ Power:1000VA
■ Dimension:1135x480x490 mm
■ Weight:88kg
KD-TS3C Automatic double basket tissue Processor
Features:
■ Unique air-press
cover, liberality view ,
Broad LBD foodlight is
save& stable with high
efficiency , long lifetime
■ Bigger screen,
friendly and illustrational
operation panel
■ There are 3 running
model: 1 single tissue basket running model,2. double tissue basket running model, 3. crossed running model
■ Electromagnetic attaching(15Kgf) the basket and the cover
■ Individual heating element and precise temperature sensor exist in the wax baths
■ Graduation mark in each bath for easier measure
■ Battery power backup for instrument running , protecting the specimen
■ Running program : Automatic with program , ramdomly adjust the program for easier operation
■ Enclosed charcoal enhanced ventilation help control processing vapors and confused gas
Technical specifications :
■Quantity of bath : 14 (1 preparation bath, 9 reagent bath , 4 wax bath )
■ Capacity of bath : 1.8 L
■ Cover opening : electro magnetize
■Immersion time in each bath programmable from 0 minute to 99 hours and 59 minutes
■Delaying process time setting in anytime of a year
■ Station dither frequency: 1~8 times/min
■Station exchange leachate shaking frequency: 2 times
■Immersion interval from one bath to another :5 senconds
■Electricity voltage : 220V , 50Hz 110V, 60Hz
■ Working power : < 600VA
■ Instrument overall : 1220x420x500 mm
■ Weight: 98kgs
KD-TS3S Automatic double basket tissue Processor
Features:
■KD-TS3S has fluent & elegent
appearance, easy to clean since it is
coated with APS engineering plastic
with high-intensity,anticorrision
■ Flexible transmission
mechanism makes it no abrasive , no
noise . Precise positioning system
ensure the stable processing
■ Double organization operating
mode can double the processing
capability . The tissue can put on
different basket according to it size to
get better effect . If there is little tissue , it can also use one operating mode for easy operation
■ 20 sets programmed for A&B procedures,broad screen finger-touched LCD.with man-machine
dialogue,promt identifying can be made in abnormal situation to make sure each operation can be
indicated(online help)
■ LCD indicate running situation,adopted with imitated syncgraphic display to make operation process
perfect
■ Environment-friendly inner circulated air cleaning system,adsorb、remove、decompose toxic and
harmful gas in the insrument
■ Setting timing of starting up machine during 0~99hrs 59mins and automatically showing finish
time,make sue task is finished in stipulated time
■10~60s adjustable time of dropping liquid,shaking basket,and drop liquid above cylinder once
exchange cylinder to avoid liquid run from one bath to another,in this way, service time of liquid
medicine,avoid dirty on the table
■0~6times /min adjustable stirring times(0 shows no-stirring),make sure all tissues immersed
thorough,evenly,and completed enough
■ Once power-off, Protecting cylinder of tissue:No.7 for A program , No.5 for B program can be
set,position of protecting cylinder can be adjusted as required
■ Self-control fan,it automatically starts up once basket goes up;as basket goes downwards,fan works
10s per min
■Self-control illuminating lamp,it starts up in programming;touch any key to prolong to 2 min as the
instrument is running
■Waterless inner heating,high precision of controlling with triple protection ,Automatic gradient
temperature control system. Starting heating automatically when need which save energy
■Low energy-consuming control circuit,self-protection once power-off;display panel is still illumed
and scrolling panel indicats it's self-protecting situation as power-off,and time of running is more than 30 H
■ After running,randomly hand-control can be made to check or add other tissues
■ More than 200 tissues can be processed one time
Technical specificat ions :
■ Numbers of cylinder:14 (10 reagent cylinders ,No.11、12、13 14 are wax dispensing cylinder)
■ Volume of each cylinder:1500ml
■ Range of temperature: ambient~80℃
■ Precision tolerance :±1%
■ Processsing time of each cylinder: 0~99 H (No.1 No.2 cylinder),0~24 H (No.3~No.14 cylinder)
■Time of exchange cylinder、delay、leachate:10~60s (adjustable),and leachate 、basket shaking
work above cylinder
■ Times of basket shaking:0~6times /min(adjustable)
■Protecting station of tissue:No.7 for A program , No.5 for B program
■ Voltage:AC220V 50Hz、AC110V 60Hz
■ Power:550VA ■ Dimension:1250x430x490 mm
■ weight:85kg
KD-TS6A Automatic Tissue Proccessor
KD-TS6A is an advance
automatic tissue processor with micro
control.. It is used to process organic
tissue specimen,water deprived and
wax soaking into tissue specimen.It
works credibly,accurately timing and
easy to use and maintain.
The product usded for dewatering
animal and vegetable tissues on
pathological department in hospital
and scientifical research unit.
Features:
■ Adopting computer to control
whole work process,operate easily ,
work stabilization
■ It operates Flexible and
convenient with exchange jar to put tissue any stations easliy
■ It gives alarm when power off and will protecting tissue in set liquid station ,obstache protect
function
■ Adopting agitation dehydrate mode, it makes tissue mixing with solvent,paraffin fully to reach good
effect
■ The LCD display is in English,easy to use
■Time design range is wide:delay time 59hr59min Each jar working hours longest 59hr59min,Time
design least distance 1 min
■ Wax jar adopt constant temperature control system. Temperature precision high:The inner tank paint
with TEFLON for anti pollution & anit corrosion
■9pcs 1.2L transparent medicine aquarium can observe tissue process state at anytime
■ There is also obstacle alarm fuction , user can use it better and more clear
■ According to user's need to tailor standby electrical source for 4-16 hours after power off
Technical Specifications:
■ Steps of processing tissue: 12steps
■ Glass container:Quantity9 capacity 1.2L
■ Wax cup: Quantity3 capacity 1L
Temperature range45~85℃±3℃
■ Process:Each cup working hours0~59hr59min
Delay process0~59hr59min
■ Vetically reciprocative motion of tissue basket: 3 times/min
■ Tissue basket specification:Barrel tissue basket--¢ 95x80mm;Layer nacelle---¢95x80mm
■ Weight: 60kg
■ Dimension:(diameter)660x(High)550x 680(Tiptop)mm
■ Working voltage: AC220V 50Hz 、AC110V 60Hz
■ Power draw: 500W
■ Room condition : Temperature range :+5℃~40℃, humidity:﹤85%(20±5℃)
KD-TS6B Vacuum Tissue Processor
It's our key product in pathology which is also
called Tissue processer .Its used to process organic
tissue specimen,water deprived and wax soaking into
tissue specimen.It works credibly,accurately timing and
has good functions.It's easy to use and maintain.Vaccum
function can accelerate the speed of Tissue processing
The project usded for dewatering animal and
vegetable tissues is applied to pathological department
in hospital and scientifical research unit.
Features:
■ Adopting computer to control whole work
process,operate brief work stabilization
■Having exchange jar and change place control
draw perch,operate agility brief
■If lose electric give an alarm,protecting tissue in liquid,obstache protect function and so on
■Adopting agitation dehydrate mode,so tissue and solvent,paraffin meet,thereby well effect
■ Screen showing information is English ,easy to use
■Time design range wide:delay time 59hr59min;Each jar working hours longest 59hr59min;Time
design least distance 1min.Each jar can be setted vacuum seperately
■ Wax jar adopt constant temperature control system.Temperature precision high: Defend
pollution ,defend canker
■Adopting 9slices 1.2L Medicine aquarium,at any moment observe tissue change at work
■ According to user's need to tailor standby electrical source,after power cut it can work in
great,working hours can reach 416hours
Technical Specifications:
■ Steps of processing tissue: 12steps
■ Glass container: Quantity9 capacity1.2L
■ Wax container: Quantity3 capacity1.2 L
Temperature range45~85℃±3℃
■ Program: Each container working hours0~59hr59min
Delay process0~59hr59min
■ Vacuum:0.053Mpa
■ Vertivally reciprocative motion of tissue basket: 3times/min
■ Tissue basket specification: Barrel tissue basket--¢95 x 80mm
Layer nacelle--¢95 x 80mm Five layers
■ Weight: 60kg
■ Dimension: (Diameter)670x(High)550 x 680(Tiptop)mm
■ Rated voltage: AC220V 50Hz、AC110V 60Hz
■ Power draw: 500W
■ Room condition : Temperature range :+5℃~40℃, humidity:﹤85%(20±5℃)
KD-ZMD-II Automatic steel-knife grinder
Especially supply for sharpening steel
knife's edge that saving a lot of manual work of
grinding.
Technical specifications:
■ Angle of knife-edge adjustment: 20℃ -
45℃
■ Interval turnover of knife: 5s, 10s, 25s
■ Grinding time: 0 60 minutes
■ Grinding knife size: below 240 mm in length
■ Working voltage: AC220V 50Hz
AC110V 60Hz
■ Power: 40 W
■ Dimensions overall: 570 x 500 x 420 mm
■ Weight: 52 kg
KD-SK1 Tissue Ultrasound Quick Processor
Features :
■ It will alarm when working
temperature reach setting temperature
or when the working time finish
■ The heating system will
automatic cutoff and alarm when
water lower then the min standard ,
which is save for operation
■Adjustable ultrasound output
to meet the need of different liquid
and tissue amount for best effect
■The tissue process effect near same with normal tissue process with LED indicating the present
heating state , Precise temperature controlling system , clear working state showing
■ Wave I has Acetone vapor recycling function,which reduce vapor of Acetone,protect the
environment
■WaveI, Wave II have time setting function and can shut off automatically on due time
■Enclosed soft touch key is easy for operation , anti dust , anti corrosion , anti liquid
■ Self memery function
Technical specifications:
■ Water station temperature adjustment: 60℃ to 85℃
■ Ultrasound wave time setting : 1~99 mins
■ Ultrasound wave working zone:3
■ Ultrasound wave adjust frequency: continuously adjustable
■ Temperature tolerance: + 1℃
■ Working voltage: AC220V 50Hz
AC110V 60Hz
■ Power: 80VA
■ Overall dimensions: 640 x 365 x 200 mm (L x W x D)
■ Weight: 20 kg
KD-103 Biomedical slices cabine
The base use Cold-rolled steel plate SPCC1.2 from Baosteel ; the
cabinet use Cold-rolled steel plate 0.8; the drawer use Cold-rolled steel
plate 0.8 . The biomedical slices cabinet has three independent
cabinet ,each layer has six drawers with inner digital tags for easy storage .
It can contain totally around 9000 pcs slices.
Specilized slide drawer , ABS slide plate .Surface treatment : Defatted
oil, Table regulator, Zinc phosphating, passivation, Powder spraying. Slot :
The slot is do by special mold . Mark groove : Integration forming .
KD-103-1 Biomedical slices box cabinet
The base use Cold-rolled steel plate SPCC1.2 from Baosteel ; the
cabinet use Cold-rolled steel plate 0.8; the drawer use Cold-rolled steel
plate 0.8 . The biomedical slices cabinet has four independent
cabinet ,each layer can contain 96 pcs slice boxes.
Surface treatment : Defatted oil, Table regulator, Zinc phosphating,
passivation, Powder spraying. Slot : The slot is do by special mold .
Mark groove : Integration forming .
KD-102 Biomedical wax cabinet
The base use Cold-rolled steel plate SPCC1.2 from Baosteel ; the cabinet
use Cold-rolled steel plate 0.8; the drawer use Cold-rolled steel plate 0.8 . The
biomedical wax cabinet has three independent cabinet ,each layer has six
drawers . paraffin wax block can put freely with its size . It can contain totally
around 11000 purchase.
Specilized slide drawer , ABS slide plate .Surface treatment : Defatted oil,
Table regulator, Zinc phosphating, passivation, Powder spraying. Slot : The slot
is do by special mold . Mark groove : Integration forming
KD-102-1 Biomedical wax cabinet(with lock)
The base use Cold-rolled steel plate SPCC1.2 from Baosteel ; the cabinet
use Cold-rolled steel plate 0.8; the drawer use Cold-rolled steel plate 0.8 . The
biomedical wax cabinet has three independent cabinet ,each layer has six
drawers . paraffin wax block can put freely with its size . It can contain totally
around 11000 purchase.
Specilized slide drawer , ABS slide plate .Surface treatment : Defatted oil,
Table regulator, Zinc phosphating, passivation, Powder spraying. Slot : The
slot is do by special mold . Mark groove : Integration forming .
KD-101 Biomedical slices cabinet
The base use Cold-rolled steel plate SPCC1.2 from Baosteel ; the cabinet
use Cold-rolled steel plate 0.8; the drawer use Cold-rolled steel plate 0.8 .The
biomedical slices cabinet devide into 6 grid 12 layers with total 72 cells ,
loading more than 60000 pcs slides. Specilized slide drawer , ABS slide
plate , inner anitskip lock . Handle use ABS Chromium plating , it devides into
six grid each drawer , convenient for storage . Surface treatment : Defatted oil,
Table regulator, Zinc phosphating, passivation, Powder spraying.
Slot : The slot is do by special mold . Mark groove : Integration forming .
The unique drawer lock have declared national patent.
KD-101-1 Biomedical slides cabinet (with lock )
The base use Cold-rolled steel plate SPCC1.2 from Baosteel ; the cabinet use
Cold-rolled steel plate 0.8; the drawer use Cold-rolled steel plate 0.8 .The
biomedical slices cabinet devide into 6 grid 12 layers with total 72 cells , loading
more than 60000 pcs slides. Specilized slide drawer , ABS slide plate , inner
anitskip lock . Handle use ABS Chromium plating , it devides into six grid each
drawer , convenient for storage . Surface treatment : Defatted oil, Table regulator,
Zinc phosphating, passivation, Powder spraying.
Slot : The slot is do by special mold . Mark groove : Integration forming .
The unique drawer lock have declared national patent.