Post on 20-Sep-2020
Price ListMarch 2020
Islands Collection by Knoll®
Table of Contents
Introduction Knoll and Sustainable Design 2Materials and Finish Options 3
Straight Leg Tables Straight Leg, Occasional Heights 5Straight Leg - Desk Height 16
X-Base Tables X-Base Tables - Occasional Heights 28X-Base Tables - Desk Height 35X-Base Tables - Standing Height 38X-Base Tables - Conference 43
MX Base Tables MX Base Tables - Occasional Heights 58MX Base Tables - Desk Height 66MX Base Tables - Standing Height 70MX Base Tables - Conference 76
Accessories Electrical Units - Drop-in 90Electrical Units - Power Square 93Electrical Units - Clamp-On 96Electrical Units - Offset Clamp-On 98Electrical Units - for Chicago 100Electrical Units - Undermount 104Electrical Units - Wide Channel Desktop Outlets 105Wire Management 107
Alpha-Numeric Index 108
Selling Policy 113
General Ordering Information 115
Islands Collection by Knoll®
PLILT12201
Copyright � 2020 Knoll, Inc.All rights reserved.All prices effective 03/15/2020.
Knoll and Sustainable Design
Each year Knoll sets key initiatives in the journey to sustainability. Focused on our impact to people and planet, Knoll reports materialhealth product attributes and sets operational targets to reduce greenhouse gas emissions, waste generation and water use (in our NorthAmerican facilities.)
Material transparency is a core Knoll sustainable design value, enabling us to optimize the design and performance of our products.Our material health program utilizes independent third-party certifications that provide an impartial and trustworthy foundation forindustry-wide transparency. Certification by respected third parties ensures that all manufacturers are held to the same high standards.Knoll certifications include: Forest Stewardship Council (FSC�), Intertek’s Clean Air Program, Business and Institutional FurnitureManufacturer’s Association (BIFMA) LEVEL� certification, International Living Future Institute’s (ILFI) Declare labelling and CertifiedEnvironmental Product Declarations. In addition, Knoll is aligned with the U.S. Green Building Council and can help organizationsachieve credits for Leadership in Energy and Environmental Design (LEED�), WELL and the Living Building Challenge (LBC) buildingcertifications.
In our manufacturing operations, we focus on efficiency and impact. Knoll Office and Knoll Europe manufacturing locations are ISO14001:2015 certified. Knoll sets objectives and targets to reduce energy, water and waste. These initiatives are part of a long-termstrategy to further reduce energy consumption and lower our carbon footprint.
We also believe in helping our customers find viable options when decommissioning furniture or other related assets. ANEW’s FullCircle Program, in partnership with Knoll, allows customers to leverage buy-back and re-sale programs as well as explore options forrepurposing or recycling that mitigate landfill impact through energy-from-waste conversion.
For more information about Knoll and sustainable design, visit www.knoll.com/environment.
2
Materials and Finish Options
For specific product applications for eachfinish refer to the finish matrix on the followingpages.
KNOLL CORE LAMINATESSolid Colors111 Jet Black* **114 Folkstone Grey* **115 Medium Grey* **117 Soft Grey* **118 Bright White* **119 Pumice* **128 Fog* **
Patterned121 Micro Grey122 Brushed Sand123 Brushed Grey129 Micro Sand
Wood Grain124 Medium Cherry* **125 Natural Maple* **126 Natural Cherry* **127 Walnut* **139 Light Ash* **140 Warm Ash* **141 Whitened Ash*142 Grey Ash* **143 Classic Oak* **144 Graphite Pear* **145 Zebra*147 Silverwood**148 Smokewood**149 Barnwood**
*Matching edgeband available**Melamine worksurface finish
POLISHED FINISHPD ChromeAL Aluminum
KNOLL CORE PAINTS111T Jet Black112T Brown113T Dark Grey114T Folkstone Grey115T Medium Grey116T Sandstone117T Soft Grey118T Bright White611T Beige Mist Metallic612T Medium Metallic Grey613T Silver
EDGE OPTIONS FOR LAMINATEWORKSURFACESSPLY Ply Edge Synthetic (L pricing)
GRAIN DIRECTIONHorizontal (H)Vertical (V):
Grain direction applies to wood grain laminates,techwoods and natural veneers.
IslandsCollectionbyKnoll
3
Materials and Finish Options
Wood FinishesCodes begin with a three digit numeric sequence, followed by a letter suffix. Each letter suffix (A-F) represents a different combination of pore fill options andgloss levels.
Code V1 TECHWOOD
638 Blond Maple628 Dark Mahogany639 Light Cherry641 Black Oak506 Maple509 Cherry512 Medium Walnut513 Medium Teak514 Espresso637 Natural644 Light Walnut645 Dove Grey
Code V2 PREMIUM TECHWOOD
647 White Pine640 Ebony642 Grigio
V2 Natural Veneer020 Natural Oak038 Rustic Walnut017 Light Walnut002 Bronze Cherry006 Maple021 Peacock Green Walnut022 Old English Walnut037 Birch
Code V3 PREMIUM VENEER
039 Pippy Oak044 Figured Sycamore
Gloss Level Fill LevelA Low Gloss Closed PoreB Medium Gloss Closed PoreC High Gloss Closed Pore
D Low Gloss Open PoreE Medium Gloss Open PoreF High Gloss Open Pore
Edge Options for VeneersSYN Complementary SyntheticSPLY Synthetic Ply Edge *
* Ply Edge available on Birch (037) worksurfaces.
Note:For more detailed information on Veneer finishes, please refer to the Wood Finish Matrix on the Knoll.com site.
IslandsCollectionbyKnoll
4
Straight Leg, Occasional Heights12�, 15� and 18� HighRound Tables
description d w h pattern no. L V1 V2 V3
Round Table12� High
30� 30� 12� ILTRD(S/B4/T4)SG301( )( )( )( )( )( )( ) $1,171. $1,369. $1,455. $1,676.36� 36� 12� ILTRD(S/B4/T4)SG361( )( )( )( )( )( )( ) 1,206. 1,404. 1,490. 1,711.42� 42� 12� ILTRD(S/B4/T4)SG421( )( )( )( )( )( )( ) 1,241. 1,439. 1,525. 1,746.48� 48� 12� ILTRD(S/B4/T4)SG481( )( )( )( )( )( )( ) 1,276. 1,474. 1,560. 1,781.54� 54� 12� ILTRD(S/B4/T4)SG541( )( )( )( )( )( )( ) 1,313. 1,525. 1,628. 1,869.60� 60� 12� ILTRD(S/B4/T4)SG601( )( )( )( )( )( )( ) 1,359. 1,587. 1,709. 1,974.
*Available with Glides only.
Round Table15� High
30� 30� 15� ILTRD(S/B4/T4)SG302( )( )( )( )( )( )( ) 1,196. 1,394. 1,480. 1,701.36� 36� 15� ILTRD(S/B4/T4)SG362( )( )( )( )( )( )( ) 1,231. 1,429. 1,515. 1,736.42� 42� 15� ILTRD(S/B4/T4)SG422( )( )( )( )( )( )( ) 1,266. 1,464. 1,550. 1,771.48� 48� 15� ILTRD(S/B4/T4)SG482( )( )( )( )( )( )( ) 1,301. 1,499. 1,585. 1,806.54� 54� 15� ILTRD(S/B4/T4)SG542( )( )( )( )( )( )( ) 1,338. 1,550. 1,653. 1,894.60� 60� 15� ILTRD(S/B4/T4)SG602( )( )( )( )( )( )( ) 1,384. 1,612. 1,734. 1,999.
*Available with Glides only.
Round Table18� High
30� 30� 18� ILTRD(S/B4/T4)(SG/SC)303( )( )( )( )( )( )( ) 1,196. 1,394. 1,480. 1,701.36� 36� 18� ILTRD(S/B4/T4)(SG/SC)363( )( )( )( )( )( )( ) 1,231. 1,429. 1,515. 1,736.42� 42� 18� ILTRD(S/B4/T4)(SG/SC)423( )( )( )( )( )( )( ) 1,266. 1,464. 1,550. 1,771.48� 48� 18� ILTRD(S/B4/T4)(SG/SC)483( )( )( )( )( )( )( ) 1,301. 1,499. 1,585. 1,806.54� 54� 18� ILTRD(S/B4/T4)(SG/SC)543( )( )( )( )( )( )( ) 1,338. 1,550. 1,653. 1,894.60� 60� 18� ILTRD(S/B4/T4)(SG/SC)603( )( )( )( )( )( )( ) 1,384. 1,612. 1,734. 1,999.
*Available with Glides and Casters.
Order Code
Example: ILTRDSSG301
IL Islands Collection byKnoll�
T TableRD RoundS Edge (S/B4/T4)SG Foot (SG/SC)30 Size1 Height (1/2/3)N Grommet option( ) Grommet finish(114) Worksurface finish(SYN) Edge finish(114) Top plate finish(114) Leg finish
Specification Information
To order please specify patternnumber including:1. Grommet option:
N = None (no grommet)D4 = Narrow slot 4�W (30�, 36�,42�)D8 = Narrow slot 8�W (48� &54�)D12 = Narrow slot 12�W (60�only)S = Power square (All sizesexcept 30�D)
2. Grommet finish:N = Not applicableD4/D8/D12 = B=Black,W=White (textured)S = 111, 114, 115, 117
3. Worksurface finish:L, V1, V2, V3
4. Edge finish:Complementary synthetic
5. Top plate finish:Painted/texturedPolished aluminum
6. Leg finishPainted/texturedPolished aluminum
All Worksurfaces are 1 1/4� thick.
Edges:S = Square EdgeB4 = Thin beveled edge four sidesT4 = Thick beveled edge four sides
*Foot:SG = GlideSC = Caster
Height (to top of worksurface):1 = 12�H2 = 15�H3 = 18�H
Application Notes
The following upcharges apply:Beveled Edge (B4 & T4): $500Casters: $30Grommets D4, D8 & D12: $80Polished finish: $125 (Top plate,leg or both)
All electrical accessories arespecified separately.
Refer to Accessories section forelectrical component pricing.
Islands Collection by Knoll®
5
Straight Leg, Occasional Heights12�, 15� and 18� HighSquare Table
description d w h pattern no. L V1 V2 V3
Square Table12� High
30� 30� 12� ILTSQ(S/B4/T4)SG301( )( )( )( )( )( ) $1,027. $1,150. $1,206. $1,331.36� 36� 12� ILTSQ(S/B4/T4)SG361( )( )( )( )( )( ) 1,062. 1,185. 1,241. 1,366.42� 42� 12� ILTSQ(S/B4/T4)SG421( )( )( )( )( )( ) 1,094. 1,229. 1,299. 1,441.48� 48� 12� ILTSQ(S/B4/T4)SG481( )( )( )( )( )( ) 1,127. 1,301. 1,386. 1,554.54� 54� 12� ILTSQ(S/B4/T4)SG541( )( )( )( )( )( ) 1,168. 1,356. 1,459. 1,649.60� 60� 12� ILTSQ(S/B4/T4)SG601( )( )( )( )( )( ) 1,213. 1,418. 1,540. 1,755.
*Available with Glides only.
Square Table15� High
30� 30� 15� ILTSQ(S/B4/T4)SG302( )( )( )( )( )( ) 1,052. 1,184. 1,254. 1,396.36� 36� 15� ILTSQ(S/B4/T4)SG362( )( )( )( )( )( ) 1,087. 1,219. 1,289. 1,341.42� 42� 15� ILTSQ(S/B4/T4)SG422( )( )( )( )( )( ) 1,119. 1,254. 1,324. 1,466.48� 48� 15� ILTSQ(S/B4/T4)SG482( )( )( )( )( )( ) 1,152. 1,304. 1,390. 1,552.54� 54� 15� ILTSQ(S/B4/T4)SG542( )( )( )( )( )( ) 1,193. 1,381. 1,484. 1,674.60� 60� 15� ILTSQ(S/B4/T4)SG602( )( )( )( )( )( ) 1,238. 1,443. 1,565. 1,780.
*Available with Glides only.
Square Table18� High
30� 30� 18� ILTSQ(S/B4/T4)(SG/SC)303( )( )( )( )( )( ) 1,052. 1,184. 1,254. 1,396.36� 36� 18� ILTSQ(S/B4/T4)(SG/SC)363( )( )( )( )( )( ) 1,087. 1,219. 1,289. 1,431.42� 42� 18� ILTSQ(S/B4/T4)(SG/SC)423( )( )( )( )( )( ) 1,119. 1,254. 1,324. 1,466.48� 48� 18� ILTSQ(S/B4/T4)(SG/SC)483( )( )( )( )( )( ) 1,152. 1,304. 1,390. 1,552.54� 54� 18� ILTSQ(S/B4/T4)(SG/SC)543( )( )( )( )( )( ) 1,193. 1,381. 1,484. 1,674.60� 60� 18� ILTSQ(S/B4/T4)(SG/SC)603( )( )( )( )( )( ) 1,238. 1,443. 1,565. 1,780.
*Available with Glides and Casters.
Order Code
Example: ILTRDSSG301
IL Islands Collection byKnoll�
T TableSQ SquareS Edge (S/B4/T4)SG Foot (SG/SC)30 Size1 Height (1/2/3)N Grommet option( ) Grommet finish(114) Worksurface finish(SYN) Edge finish(114) Top plate finish(114) Leg finish
Specification Information
To order please specify patternnumber including:1. Grommet option:
N = None (no grommet)D4 = Narrow slot 4�W (30�, 36�,42�)D8 = Narrow slot 8�W (48� &54�)D12 = Narrow slot 12�W (60�only)S = Power square (All sizesexcept 30�D)
2. Grommet finish:N = Not applicableD4/D8/D12 = B=Black,W=White (textured)S = 111, 114, 115, 117
3. Worksurface finish:L, V1, V2, V3
4. Edge finish:Complementary synthetic
5. Top plate finish:Painted/texturedPolished aluminum
6. Leg finishPainted/texturedPolished aluminum
All Worksurfaces are 1 1/4� thick.
Edges:S = Square EdgeB4 = Thin beveled edge four sidesT4 = Thick beveled edge four sides
*Foot:SG = GlideSC = Caster
Height (to top of worksurface):1 = 12�H2 = 15�H3 = 18�H
Application Notes
The following upcharges apply:Beveled Edge (B4 & T4): $650Casters: $30Grommets D4, D8 & D12: $80Polished finish: $125 (Top plate,leg or both)
All electrical accessories arespecified separately.
Refer to Accessories section forelectrical component pricing.
Islands Collection by Knoll®
6
Straight Leg, Occasional Heights12�, 15� and 18� HighSquare Table with Curved Corners
description d w h pattern no. L V1 V2 V3
Square Table, 12� HighCurved corners
30� 30� 12� ILTSC(S/B4/T4)SG301( )( )( )( )( )( ) $1,027. $1,150. $1,206. $1,331.36� 36� 12� ILTSC(S/B4/T4)SG361( )( )( )( )( )( ) 1,062. 1,185. 1,241. 1,366.42� 42� 12� ILTSC(S/B4/T4)SG421( )( )( )( )( )( ) 1,094. 1,229. 1,299. 1,441.48� 48� 12� ILTSC(S/B4/T4)SG481( )( )( )( )( )( ) 1,127. 1,301. 1,386. 1,554.54� 54� 12� ILTSC(S/B4/T4)SG541( )( )( )( )( )( ) 1,168. 1,356. 1,459. 1,649.60� 60� 12� ILTSC(S/B4/T4)SG601( )( )( )( )( )( ) 1,213. 1,418. 1,540. 1,755.
*Available with Glides only.
Square Table, 15� HighCurved corners
30� 30� 15� ILTSC(S/B4/T4)SG302( )( )( )( )( )( ) 1,052. 1,184. 1,254. 1,396.36� 36� 15� ILTSC(S/B4/T4)SG362( )( )( )( )( )( ) 1,087. 1,219. 1,289. 1,431.42� 42� 15� ILTSC(S/B4/T4)SG422( )( )( )( )( )( ) 1,119. 1,254. 1,324. 1,466.48� 48� 15� ILTSC(S/B4/T4)SG482( )( )( )( )( )( ) 1,152. 1,304. 1,390. 1,552.54� 54� 15� ILTSC(S/B4/T4)SG542( )( )( )( )( )( ) 1,193. 1,381. 1,484. 1,674.60� 60� 15� ILTSC(S/B4/T4)SG602( )( )( )( )( )( ) 1,238. 1,443. 1,565. 1,780.
*Available with Glides only.
Square Table, 18� HighCurved Corners
30� 30� 18� ILTSC(S/B4/T4)(SG/SC)303( )( )( )( )( )( ) 1,052. 1,184. 1,254. 1,396.36� 36� 18� ILTSC(S/B4/T4)(SG/SC)363( )( )( )( )( )( ) 1,087. 1,219. 1,289. 1,431.42� 42� 18� ILTSC(S/B4/T4)(SG/SC)423( )( )( )( )( )( ) 1,119. 1,254. 1,324. 1,466.48� 48� 18� ILTSC(S/B4/T4)(SG/SC)483( )( )( )( )( )( ) 1,152. 1,304. 1,390. 1,552.54� 54� 18� ILTSC(S/B4/T4)(SG/SC)543( )( )( )( )( )( ) 1,193. 1,381. 1,484. 1,674.60� 60� 18� ILTSC(S/B4/T4)(SG/SC)603( )( )( )( )( )( ) 1,238. 1,443. 1,565. 1,780.
*Available with Glides and Casters.
Order Code
Example: ILTSCSSG301
IL Islands Collection byKnoll�
T TableSC Square with Curved
CornersS Edge (S/B4/T4)SG Foot (SG/SC)30 Size1 Height (1/2/3)N Grommet option( ) Grommet finish(114) Worksurface finish(SYN) Edge finish(114) Top plate finish(114) Leg finish
Specification Information
To order please specify patternnumber including:1. Grommet option:
N = None (no grommet)D4 = Narrow slot 4�W (30�, 36�,42�)D8 = Narrow slot 8�W (48� &54�)D12 = Narrow slot 12�W (60�only)S = Power square (All sizesexcept 30�D)
2. Grommet finish:N = Not applicableD4/D8/D12 = B=Black,W=White (textured)S = 111, 114, 115, 117
3. Worksurface finish:L, V1, V2, V3
4. Edge finish:Complementary synthetic
5. Top plate finish:Painted/texturedPolished aluminum
6. Leg finishPainted/texturedPolished aluminum
All Worksurfaces are 1 1/4� thick .
Edges:S = Square EdgeB4 = Thin beveled edge four sidesT4 = Thick beveled edge four sides
*Foot:SG = GlideSC = Caster
Height (to top of worksurface):1 = 12�H2 = 15�H3 = 18�H
Application Notes
The following upcharges apply:Beveled Edge (B4 & T4): $500Casters: $30Grommets D4, D8 & D12: $80Polished finish: $125 (Top plate,leg or both)
All electrical accessories arespecified separately.
Refer to Accessories section forelectrical component pricing.
Islands Collection by Knoll®
7
Straight Leg, Occasional Heights12�, 15� and 18� HighSoft Square Tables
description d w h pattern no. L V1 V2 V3
Soft square Table12� High
30� 30� 12� ILTSS(S/B4/T4)SG301( )( )( )( )( )( ) $1,027. $1,150. $1,206. $1,331.36� 36� 12� ILTSS(S/B4/T4)SG361( )( )( )( )( )( ) 1,062. 1,185. 1,241. 1,366.42� 42� 12� ILTSS(S/B4/T4)SG421( )( )( )( )( )( ) 1,094. 1,229. 1,299. 1,441.48� 48� 12� ILTSS(S/B4/T4)SG481( )( )( )( )( )( ) 1,127. 1,301. 1,386. 1,554.54� 54� 12� ILTSS(S/B4/T4)SG541( )( )( )( )( )( ) 1,168. 1,356. 1,459. 1,649.60� 60� 12� ILTSS(S/B4/T4)SG601( )( )( )( )( )( ) 1,213. 1,418. 1,540. 1,755.
*Available with Glides only.
Soft square Table15� High
30� 30� 15� ILTSS(S/B4/T4)SG302( )( )( )( )( )( ) 1,052. 1,184. 1,254. 1,396.36� 36� 15� ILTSS(S/B4/T4)SG362( )( )( )( )( )( ) 1,087. 1,219. 1,289. 1,431.42� 42� 15� ILTSS(S/B4/T4)SG422( )( )( )( )( )( ) 1,119. 1,254. 1,324. 1,466.48� 48� 15� ILTSS(S/B4/T4)SG482( )( )( )( )( )( ) 1,152. 1,304. 1,390. 1,552.54� 54� 15� ILTSS(S/B4/T4)SG542( )( )( )( )( )( ) 1,193. 1,381. 1,484. 1,674.60� 60� 15� ILTSS(S/B4/T4)SG602( )( )( )( )( )( ) 1,238. 1,443. 1,565. 1,780.
*Available with Glides only.
Soft square Table18� High
30� 30� 18� ILTSS(S/B4/T4)(SG/SC)303( )( )( )( )( )( ) 1,052. 1,184. 1,254. 1,396.36� 36� 18� ILTSS(S/B4/T4)(SG/SC)363( )( )( )( )( )( ) 1,087. 1,219. 1,289. 1,431.42� 42� 18� ILTSS(S/B4/T4)(SG/SC)423( )( )( )( )( )( ) 1,119. 1,254. 1,324. 1,466.48� 48� 18� ILTSS(S/B4/T4)(SG/SC)483( )( )( )( )( )( ) 1,152. 1,254. 1,324. 1,466.54� 54� 18� ILTSS(S/B4/T4)(SG/SC)543( )( )( )( )( )( ) 1,193. 1,381. 1,484. 1,674.60� 60� 18� ILTSS(S/B4/T4)(SG/SC)603( )( )( )( )( )( ) 1,238. 1,443. 1,565. 1,780.
*Available with Glides and Casters.
Example: ILTSSSSG301
IL Islands Collection byKnoll�
T TableSS Soft SquareS Edge (S/B4/T4)SG Foot (SG/SC)30 Size1 Height (1/2/3)N Grommet option( ) Grommet finish(114) Worksurface finish(SYN) Edge finish(114) Top plate finish(114) Leg finish
Specification Notes
To order please specify patternnumber including:1. Grommet option:
N = None (no grommet)D4 = Narrow slot 4�W (30�, 36�,42�)D8 = Narrow slot 8�W (48� &54�)D12 = Narrow slot 12�W (60�only)S = Power square (All sizesexcept 30�D)
2. Grommet finish:N = Not applicableD4/D8/D12 = B=Black,W=White (textured)S = 111, 114, 115, 117
3. Worksurface finish:L, V1, V2, V3
4. Edge finish:Complementary synthetic
5. Top plate finish:Painted/texturedPolished aluminum
6. Leg finishPainted/texturedPolished aluminum
All Worksurfaces are 1 1/4� thick.
Edges:S = Square EdgeB4 = Thin beveled edge four sidesT4 = Thick beveled edge four sides
*Foot:SG = GlideSC = Caster
Height (to top of worksurface):1 = 12�H2 = 15�H3 = 18�H
Application Notes
The following upcharges apply:Beveled Edge (B4 & T4): $500Casters: $30Grommets D4, D8 & D12: $80Polished finish: $125 (Top plate,leg or both)
All electrical accessories arespecified separately.
Refer to Accessories section forelectrical component pricing.
Islands Collection by Knoll®
8
Straight Leg, Occasional Heights12�, 15� and 18� HighSoft Pentagon Tables
description d w h pattern no. L V1 V2 V3
Soft pentagon Tables12� High
36� 36� 12� ILTPT(S/B4/T4)SG361( )( )( )( )( )( ) $1,412. $1,607. $1,692. $1,924.42� 42� 12� ILTPT(S/B4/T4)SG421( )( )( )( )( )( ) 1,447. 1,642. 1,727. 1,959.48� 48� 12� ILTPT(S/B4/T4)SG481( )( )( )( )( )( ) 1,482. 1,677. 1,762. 1,994.54� 54� 12� ILTPT(S/B4/T4)SG541( )( )( )( )( )( ) 1,517. 1,712. 1,797. 2,029.60� 60� 12� ILTPT(S/B4/T4)SG601( )( )( )( )( )( ) 1,558. 1,767. 1,870. 2,124.
*Available with Glides only.
Soft pentagon Tables15� High
36� 36� 15� ILTPT(S/B4/T4)SG362( )( )( )( )( )( ) 1,497. 1,692. 1,777. 2,009.42� 42� 15� ILTPT(S/B4/T4)SG422( )( )( )( )( )( ) 1,532. 1,727. 1,812. 2,044.48� 48� 15� ILTPT(S/B4/T4)SG482( )( )( )( )( )( ) 1,567. 1,762. 1,847. 2,079.54� 54� 15� ILTPT(S/B4/T4)SG542( )( )( )( )( )( ) 1,608. 1,817. 1,920. 2,174.60� 60� 15� ILTPT(S/B4/T4)SG602( )( )( )( )( )( ) 1,653. 1,879. 2,001. 2,279.
*Available with Glides only.
Soft pentagon Tables18� High
36� 36� 18� ILTPT(S/B4/T4)(SG/SC)363( )( )( )( )( )( ) 1,497. 1,692. 1,777. 2,009.42� 42� 18� ILTPT(S/B4/T4)(SG/SC)423( )( )( )( )( )( ) 1,532. 1,727. 1,812. 2,044.48� 48� 18� ILTPT(S/B4/T4)(SG/SC)483( )( )( )( )( )( ) 1,567. 1,762. 1,847. 2,079.54� 54� 18� ILTPT(S/B4/T4)(SG/SC)543( )( )( )( )( )( ) 1,608. 1,817. 1,920. 2,174.60� 60� 18� ILTPT(S/B4/T4)(SG/SC)603( )( )( )( )( )( ) 1,653. 1,879. 2,001. 2,279.
*Available with Glides and Casters.
Order Code
Example: ILTPTSSG301
IL Islands Collection byKnoll�
T TablePT Soft PentagonS Edge (S/B4/T4)SG Foot (SG/SC)30 Size1 Height (1/2/3)N Grommet option( ) Grommet finish(114) Worksurface finish(SYN) Edge finish(114) Top plate finish(114) Leg finish
Specification Information
To order please specify patternnumber including:1. Grommet option:
N = None (no grommet)D4 = Narrow slot 4�W (36�, 42�)D8 = Narrow slot 8�W (48� &54�)D12 = Narrow slot 12�W (60�only)S = Power square (All sizes)
2. Grommet finish:N = Not applicableD4/D8/D12 = B=Black,W=White (textured)S = 111, 114, 115, 117
3. Worksurface finish:L, V1, V2, V3
4. Edge finish:Complementary synthetic
5. Top plate finish:Painted/texturedPolished aluminum
6. Leg finishPainted/texturedPolished aluminum
All Worksurfaces are 1 1/4� thick.
Edges:S = Square EdgeB4 = Thin beveled edge four sidesT4 = Thick beveled edge four sides
*Foot:SG = GlideSC = Caster
Height (to top of worksurface):1 = 12�H2 = 15�H3 = 18�H
Application Notes
The following upcharges apply:Beveled Edge (B4 & T4): $500Casters: $30Grommets D4, D8 & D12: $80Polished finish: $175 (Top plate,leg or both)
All electrical accessories arespecified separately.
Refer to Accessories section forelectrical component pricing.
Islands Collection by Knoll®
9
Straight Leg, Occasional Heights12�, 15� and 18� HighSoft Pentagon Tables, Type 2
description d w h pattern no. L V1 V2 V3
Soft Pentagon TablesType 2, 12� High
48� 48� 12� ILTP2(S/B4/T4)SG481( )( )( )( )( )( ) $1,517. $1,712. $1,797. $2,029.54� 54� 12� ILTP2(S/B4/T4)SG541( )( )( )( )( )( ) 1,558. 1,767. 1,870. 2,124.60� 60� 12� ILTP2(S/B4/T4)SG601( )( )( )( )( )( ) 1,603. 1,829. 1,951. 2,229.
*Available with Glides only.
Soft Pentagon TablesType 2, 15� High
48� 48� 15� ILTP2(S/B4/T4)SG482( )( )( )( )( )( ) 1,567. 1,762. 1,847. 2,079.54� 54� 15� ILTP2(S/B4/T4)SG542( )( )( )( )( )( ) 1,608. 1,817. 1,920. 2,174.60� 60� 15� ILTP2(S/B4/T4)SG602( )( )( )( )( )( ) 1,653. 1,879. 2,001. 2,279.
*Available with Glides only.
Soft Pentagon TablesType 2, 18� High
48� 48� 18� ILTP2(S/B4/T4)(SG/SC)483( )( )( )( )( )( ) 1,567. 1,762. 1,847. 2,079.54� 54� 18� ILTP2(S/B4/T4)(SG/SC)543( )( )( )( )( )( ) 1,608. 1,817. 1,920. 2,174.60� 60� 18� ILTP2(S/B4/T4)(SG/SC)603( )( )( )( )( )( ) 1,653. 1,879. 2,001. 2,279.
*Available with Glides and Casters.
Order Code
Example: ILTP2SSG301
IL Islands Collection byKnoll�
T TableP2 Soft Pentagon Type 2S Edge (S/B4/T4)SG Foot (SG/SC)30 Size1 Height (1/2/3)N Grommet option( ) Grommet finish(114) Worksurface finish(SYN) Edge finish(114) Top plate finish(114) Leg finish
Specification Information
To order please specify patternnumber including:1. Grommet option:
N = None (no grommet)D8 = Narrow slot 8�W (48� &54�)D12 = Narrow slot 12�W (60�only)S = Power square (All sizesexcept 30�D)
2. Grommet finish:N = Not applicableD4/D8/D12 = B=Black,W=White (textured)S = 111, 114, 115, 117
3. Worksurface finish:L, V1, V2, V3
4. Edge finish:Complementary synthetic
5. Top plate finish:Painted/texturedPolished aluminum
6. Leg finishPainted/texturedPolished aluminum
All Worksurfaces are 1 1/4� thick.
Edges:S = Square EdgeB4 = Thin beveled edge four sidesT4 = Thick beveled edge four sides
*Foot:SG = GlideSC = Caster
Height (to top of worksurface):1 = 12�H2 = 15�H3 = 18�H
Application Notes
The following upcharges apply:Beveled Edge (B4 & T4): $500Casters: $30Grommets D8 & D12: $80Polished finish: $175 (Top plate,leg or both)
All electrical accessories arespecified separately.
Refer to Accessories section forelectrical component pricing.
Islands Collection by Knoll®
10
Straight Leg, Occasional Heights12�, 15� and 18� HighOrganic Pentagon Tables, Type A
description d w h pattern no. L V1 V2 V3
Organic Pentagon TableType A, 12� High
48� 48� 12� ILTOPA(S/B4/T4)SG481( )( )( )( )( )( ) $1,517. $1,712. $1,797. $2,029.54� 54� 12� ILTOPA(S/B4/T4)SG541( )( )( )( )( )( ) 1,558. 1,767. 1,870. 2,124.60� 60� 12� ILTOPA(S/B4/T4)SG601( )( )( )( )( )( ) 1,603. 1,829. 1,951. 2,229.
*Available with Glides only.
Organic Pentagon TableType A, 15� High
48� 48� 15� ILTOPA(S/B4/T4)SG482( )( )( )( )( )( ) 1,567. 1,762. 1,847. 2,079.54� 54� 15� ILTOPA(S/B4/T4)SG542( )( )( )( )( )( ) 1,608. 1,817. 1,920. 2,174.60� 60� 15� ILTOPA(S/B4/T4)SG602( )( )( )( )( )( ) 1,653. 1,879. 2,001. 2,279.
*Available with Glides only.
Organic Pentagon TableType A, 18� High
48� 48� 18� ILTOPA(S/B4/T4)(SG/SC)483( )( )( )( )( )( ) 1,567. 1,762. 1,847. 2,079.54� 54� 18� ILTOPA(S/B4/T4)(SG/SC)543( )( )( )( )( )( ) 1,608. 1,817. 1,920. 2,174.60� 60� 18� ILTOPA(S/B4/T4)(SG/SC)603( )( )( )( )( )( ) 1,653. 1,879. 2,001. 2,279.
*Available with Glides and Casters.
Order Code
Example: ILTOPASSG301
IL Islands Collection byKnoll�
T TableOPA Organic pentagon Type
AS Edge (S/B4/T4)SG Foot (SG/SC)30 Size1 Height (1/2/3)N Grommet option( ) Grommet finish(114) Worksurface finish(SYN) Edge finish(114) Top plate finish(114) Leg finish
Specification Notes
To order please specify patternnumber including:1. Grommet option:
N = None (no grommet)D8 = Narrow slot 8�W (48� &54�)D12 = Narrow slot 12�W (60�only)S = Power square (All sizesexcept 30�D)
2. Grommet finish:N = Not applicableD8/D12 = B=Black, W=White(textured)S = 111, 114, 115, 117
3. Worksurface finish:L, V1, V2, V3
4. Edge finish:Complementary synthetic
5. Top plate finish:Painted/texturedPolished aluminum
6. Leg finishPainted/texturedPolished aluminum
All Worksurfaces are 1 1/4� thick.
Edges:S = Square EdgeB4 = Thin beveled edge four sidesT4 = Thick beveled edge four sides
*Foot:SG = GlideSC = Caster
Height (to top of worksurface):1 = 12�H2 = 15�H3 = 18�H
Application Notes
The following upcharges apply:Beveled Edge (B4 & T4): $500Casters: $30Grommets D4, D8 & D12: $80Polished finish: $175 (Top plate,leg or both)
All electrical accessories arespecified separately.
Refer to Accessories section forelectrical component pricing.
Islands Collection by Knoll®
11
Straight Leg, Occasional Heights12�, 15� and 18� HighOrganic Pentagon Tables, Type B
description d w h pattern no. L V1 V2 V3
Organic Pentagon TableType B, 12� High
48� 48� 12� ILTOPB(S/B4/T4)SG481( )( )( )( )( )( ) $1,517. $1,712. $1,797. $2,029.54� 54� 12� ILTOPB(S/B4/T4)SG541( )( )( )( )( )( ) 1,558. 1,767. 1,870. 2,124.60� 60� 12� ILTOPB(S/B4/T4)SG601( )( )( )( )( )( ) 1,603. 1,829. 1,951. 2,229.
*Available with Glides only.
Organic Pentagon TableType B, 15� High
48� 48� 15� ILTOPB(S/B4/T4)SG482( )( )( )( )( )( ) 1,567. 1,762. 1,847. 2,079.54� 54� 15� ILTOPB(S/B4/T4)SG542( )( )( )( )( )( ) 1,608. 1,817. 1,920. 2,174.60� 60� 15� ILTOPB(S/B4/T4)SG602( )( )( )( )( )( ) 1,653. 1,879. 2,001. 2,279.
*Available with Glides only.
Organic Pentagon TableType B, 18� High
48� 48� 18� ILTOPB(S/B4/T4)(SG/SC)483( )( )( )( )( )( ) 1,567. 1,762. 1,847. 2,079.54� 54� 18� ILTOPB(S/B4/T4)(SG/SC)543( )( )( )( )( )( ) 1,608. 1,817. 1,920. 2,174.60� 60� 18� ILTOPB(S/B4/T4)(SG/SC)603( )( )( )( )( )( ) 1,653. 1,879. 2,001. 2,279.
*Available with Glides and Casters.
Order Code
Example: ILTOPBSSG301
IL Islands Collection byKnoll�
T TableOPB Organic Pentagon Type
BS Edge (S/B4/T4)SG Foot (SG/SC)30 Size1 Height (1/2/3)N Grommet option( ) Grommet finish(114) Worksurface finish(SYN) Edge finish(114) Top plate finish(114) Leg finish
Specification Information
To order please specify patternnumber including:1. Grommet option:
N = None (no grommet)D8 = Narrow slot 8�W (48� &54�)D12 = Narrow slot 12�W (60�only)S = Power square (All sizesexcept 30�D)
2. Grommet finish:N = Not applicableD8/D12 = B=Black, W=White(textured)S = 111, 114, 115, 117
3. Worksurface finish:L, V1, V2, V3
4. Edge finish:Complementary synthetic
5. Top plate finish:Painted/texturedPolished aluminum
6. Leg finishPainted/texturedPolished aluminum
All Worksurfaces are 1 1/4� thick.
Edges:S = Square EdgeB4 = Thin beveled edge four sidesT4 = Thick beveled edge four sides
*Foot:SG = GlideSC = Caster
Height (to top of worksurface):1 = 12�H2 = 15�H3 = 18�H
Application Notes
The following upcharges apply:Beveled Edge (B4 & T4): $500Casters: $30Grommets D4, D8 & D12: $80Polished finish: $175 (Top plate,leg or both)
All electrical accessories arespecified separately.
Refer to Accessories section forelectrical component pricing.
Islands Collection by Knoll®
12
Straight Leg, Occasional Heights12�, 15� and 18� HighOrganic Triangle Tables, Left and Right
description d w h pattern no. L V1 V2 V3
Organic triangle Table12� High
Left hand shown
36� 44� 12� ILTOT(L/R)(S/B4/T4)SG36441( )( )( )( )( )( ) $1,269. $1,448. $1,512. $1,718.42� 51� 12� ILTOT(L/R)(S/B4/T4)SG42511( )( )( )( )( )( ) 1,306. 1,498. 1,578. 1,804.48� 59� 12� ILTOT(L/R)(S/B4/T4)SG48591( )( )( )( )( )( ) 1,352. 1,560. 1,660. 1,911.54� 66� 12� ILTOT(L/R)(S/B4/T4)SG54661( )( )( )( )( )( ) 1,401. 1,625. 1,747. 2,024.60� 74� 12� ILTOT(L/R)(S/B4/T4)SG60741( )( )( )( )( )( ) 1,459. 1,704. 1,851. 2,154.
*Available with Glides only.
Organic triangle Table15� High
Left hand shown
36� 44� 15� ILTOT(L/R)(S/B4/T4)SG36442( )( )( )( )( )( ) 1,294. 1,473. 1,537. 1,743.42� 51� 15� ILTOT(L/R)(S/B4/T4)SG42512( )( )( )( )( )( ) 1,331. 1,523. 1,603. 1,829.48� 59� 15� ILTOT(L/R)(S/B4/T4)SG48592( )( )( )( )( )( ) 1,377. 1,585. 1,685. 1,936.54� 66� 15� ILTOT(L/R)(S/B4/T4)SG54662( )( )( )( )( )( ) 1,426. 1,650. 1,772. 2,049.60� 74� 15� ILTOT(L/R)(S/B4/T4)SG60742( )( )( )( )( )( ) 1,484. 1,729. 1,876. 2,184.
*Available with Glides only.
Organic triangle Table18� High
Left hand shown
36� 44� 18� ILTOT(L/R)(S/B4/T4)(SG/SC)36443( )( )( )( )( )( ) 1,294. 1,473. 1,537. 1,743.42� 51� 18� ILTOT(L/R)(S/B4/T4)(SG/SC)42513( )( )( )( )( )( ) 1,331. 1,523. 1,603. 1,829.48� 59� 18� ILTOT(L/R)(S/B4/T4)(SG/SC)48593( )( )( )( )( )( ) 1,377. 1,585. 1,685. 1,936.54� 66� 18� ILTOT(L/R)(S/B4/T4)(SG/SC)54663( )( )( )( )( )( ) 1,426. 1,650. 1,772. 2,049.60� 74� 18� ILTOT(L/R)(S/B4/T4)(SG/SC)60743( )( )( )( )( )( ) 1,484. 1,729. 1,876. 2,184.
*Available with Glides and Casters.
Order Code
Example: ILTOTLSSG36441
IL Islands Collection byKnoll�
T TableOT Organic TriangleL Left hand, (R=Right)S Edge (S/B4/T4)SG Foot (SG/SC)36 Depth44 Width1 Height (1/2/3)N Grommet option( ) Grommet finish(114) Worksurface finish(SYN) Edge finish(114) Top plate finish(114) Leg finish
Specification Information
To order please specify patternnumber including:1. Grommet option:
N = None (no grommet)D8 = Narrow slot 8�W (48� &54�)D12 = Narrow slot 12�W (60�only)S = Power square (All sizes)
2. Grommet finish:N = Not applicableD8/D12 = B=Black, W=White(textured)S = 111, 114, 115, 117
3. Worksurface finish:L, V1, V2, V3
4. Edge finish:Complementary synthetic
5. Top plate finish:Painted/texturedPolished aluminum
6. Leg finishPainted/texturedPolished aluminum
All Worksurfaces are 1 1/4� thick.
Edges:S = Square EdgeB4 = Thin beveled edge four sidesT4 = Thick beveled edge four sides
*Foot:SG = GlideSC = Caster
Height (to top of worksurface):1 = 12�H2 = 15�H3 = 18�H
Application Notes
The following upcharges apply:Beveled Edge (B4 & T4): $500Casters: $30Grommets D8 & D12: $80Polished finish: $125 (Top plate,leg or both)
All electrical accessories arespecified separately.
Refer to Accessories section forelectrical component pricing.
Islands Collection by Knoll®
13
Straight Leg, Occasional Heights12�, 15� and 18� HighOrganic Elongated Pentagon Tables, Left and Right
description d w h pattern no. L V1 V2 V3
Organic elongatd pentagonTable, 12� High
Left hand shown
35� 60� 12� ILTOE(L/R)(S/B4/T4)SG35601( )( )( )( )( )( )( ) $1,303. $1,494. $1,573. $1,797.39� 66� 12� ILTOE(L/R)(S/B4/T4)SG39661( )( )( )( )( )( )( ) 1,335. 1,537. 1,629. 1,870.42� 72� 12� ILTOE(L/R)(S/B4/T4)SG42721( )( )( )( )( )( )( ) 1,365. 1,577. 1,683. 1,940.45� 78� 12� ILTOE(L/R)(S/B4/T4)SG45781( )( )( )( )( )( )( ) 1,397. 1,620. 1,740. 2,015.48� 84� 12� ILTOE(L/R)(S/B4/T4)SG48841( )( )( )( )( )( )( ) 1,432. 1,667. 1,802. 2,095.
*Available with Glides only.
Organic elongatd pentagonTable, 15� High
Left hand shown
35� 60� 15� ILTOE(L/R)(S/B4/T4)SG35602( )( )( )( )( )( )( ) 1,328. 1,519. 1,598. 1,822.39� 66� 15� ILTOE(L/R)(S/B4/T4)SG39662( )( )( )( )( )( )( ) 1,360. 1,562. 1,654. 1,895.42� 72� 15� ILTOE(L/R)(S/B4/T4)SG42722( )( )( )( )( )( )( ) 1,390. 1,602. 1,708. 1,965.45� 78� 15� ILTOE(L/R)(S/B4/T4)SG45782( )( )( )( )( )( )( ) 1,422. 1,645. 1,765. 2,040.48� 84� 15� ILTOE(L/R)(S/B4/T4)SG48842( )( )( )( )( )( )( ) 1,457. 1,692. 1,827. 2,120.
*Available with Glides only.
Organic elongatd pentagonTable, 18� High
Left hand shown
35� 60� 18� ILTOE(L/R)(S/B4/T4)(SG/SC)35603( )( )( )( )( )( )( ) 1,328. 1,519. 1,598. 1,822.39� 66� 18� ILTOE(L/R)(S/B4/T4)(SG/SC)39663( )( )( )( )( )( )( ) 1,360. 1,562. 1,654. 1,895.42� 72� 18� ILTOE(L/R)(S/B4/T4)(SG/SC)42723( )( )( )( )( )( )( ) 1,390. 1,602. 1,708. 1,965.45� 78� 18� ILTOE(L/R)(S/B4/T4)(SG/SC)45783( )( )( )( )( )( )( ) 1,422. 1,645. 1,765. 2,040.48� 84� 18� ILTOE(L/R)(S/B4/T4)(SG/SC)48843( )( )( )( )( )( )( ) 1,457. 1,692. 1,827. 2,120.
*Available with Glides and Casters.
Order Code
Example: ILTOELSSG35601
IL Islands Collection byKnoll�
T TableOE Organic Elongated
PentagonL Left Hand, (R=Right)S Edge (S/B4/T4)SG Foot (SG/SC)35 Depth60 Width1 Height (1/2/3)N Grommet option( ) Grommet finish(114) Worksurface finish(SYN) Edge finish(114) Top plate finish(114) Leg finish
Specification Information
To order please specify patternnumber including:1. Grommet option:
N = None (no grommet)D12 = Narrow slot 12�W (60�only)S = Power square (All sizes)All grommets are centered on theworksurfaces.
2. Grommet finish:N = Not applicableD12 = B=Black, W=White(textured)S = 111, 114, 115, 117
3. Worksurface finish:L, V1, V2, V3
4. Edge finish:Complementary synthetic
5. Top plate finish:Painted/texturedPolished aluminum
6. Leg finishPainted/texturedPolished aluminum
All Worksurfaces are 1 1/4� thick.
Edges:S = Square EdgeB4 = Thin beveled edge four sidesT4 = Thick beveled edge four sides
*Foot:SG = GlideSC = Caster
Height (to top of worksurface):1 = 12�H2 = 15�H3 = 18�H
Application Notes
The following upcharges apply:Beveled Edge (B4 & T4): $500Casters: $30Grommets D12: $80Polished finish: $125 (Top plate,leg or both)
All electrical accessories arespecified separately.
Refer to Accessories section forelectrical component pricing.
Islands Collection by Knoll®
14
Straight Leg, Occasional Heights12�, 15� and 18� HighOrganic Rectangle Table, Left and Right
description d w h pattern no. L V1 V2 V3
Organic rectangle Table12� High
Left hand shown
33� 60� 12� ILTOR(L/R)(S/B4/T4)SG33601( )( )( )( )( )( )( ) $1,295. $1,483. $1,559. $1,779.33� 72� 12� ILTOR(L/R)(S/B4/T4)SG33721( )( )( )( )( )( )( ) 1,321. 1,519. 1,606. 1,840.39� 60� 12� ILTOR(L/R)(S/B4/T4)SG39601( )( )( )( )( )( )( ) 1,319. 1,516. 1,601. 1,834.39� 72� 12� ILTOR(L/R)(S/B4/T4)SG39721( )( )( )( )( )( )( ) 1,350. 1,558. 1,657. 1,907.
*Available with Glides only.
Organic rectangle Table15� High
Left hand shown
33� 60� 15� ILTOR(L/R)(S/B4/T4)SG33602( )( )( )( )( )( )( ) 1,320. 1,508. 1,584. 1,804.33� 72� 15� ILTOR(L/R)(S/B4/T4)SG33722( )( )( )( )( )( )( ) 1,346. 1,544. 1,631. 1,865.39� 60� 15� ILTOR(L/R)(S/B4/T4)SG39602( )( )( )( )( )( )( ) 1,344. 1,541. 1,626. 1,859.39� 72� 15� ILTOR(L/R)(S/B4/T4)SG39722( )( )( )( )( )( )( ) 1,375. 1,583. 1,682. 1,932.
*Available with Glides only.
Organic rectangle Table18� High
Left hand shown
33� 60� 18� ILTOR(L/R)(S/B4/T4)(SG/SC)33603( )( )( )( )( )( )( ) 1,320. 1,508. 1,584. 1,804.33� 72� 18� ILTOR(L/R)(S/B4/T4)(SG/SC)33723( )( )( )( )( )( )( ) 1,346. 1,544. 1,631. 1,865.39� 60� 18� ILTOR(L/R)(S/B4/T4)(SG/SC)39603( )( )( )( )( )( )( ) 1,344. 1,541. 1,626. 1,859.39� 72� 18� ILTOR(L/R)(S/B4/T4)(SG/SC)39723( )( )( )( )( )( )( ) 1,375. 1,583. 1,682. 1,932.
*Available with Glides and Casters.
Order Code
Example: ILTORLSSG36441
IL Islands Collection byKnoll�
T TableOR Organic RectangleL Left hand, (R=Right)S Edge (S/B4/T4)SG Foot (SG/SC)33 Depth60 Width1 Height (1/2/3)N Grommet option( ) Grommet finish(114) Worksurface finish(SYN) Edge finish(114) Top plate finish(114) Leg finish
Specification Information
To order please specify patternnumber including:1. Grommet option:
N = None (no grommet)D8 = Narrow slot 8�W (48� &54�)S = Power square (All sizes)All grommets are center on theworksurface.
2. Grommet finish:N = Not applicableD8 = B=Black, W=White(textured)S = 111, 114, 115, 117
3. Worksurface finish:L, V1, V2, V3
4. Edge finish:Complementary synthetic
5. Top plate finish:Painted/texturedPolished aluminum
6. Leg finishPainted/texturedPolished aluminum
All Worksurfaces are 1 1/4� thick.
Edges:S = Square EdgeB4 = Thin beveled edge four sidesT4 = Thick beveled edge four sides
*Foot:SG = GlideSC = Caster
Height (to top of worksurface):1 = 12�H2 = 15�H3 = 18�H
Application Notes
The following upcharges apply:Beveled Edge (B4 & T4): $500Casters: $30Grommets D8 & D12: $80Polished finish: $125 (Top plate,leg or both)
All electrical accessories arespecified separately.
Refer to Accessories section forelectrical component pricing.
Islands Collection by Knoll®
15
Straight Leg - Desk Height29� HighRound Tables
description d w h pattern no. L V1 V2 V3
Round Table29� High
48� 48� 29� ILTRD(S/B4/T4)(SG/SC)484( )( )( )( )( )( )( ) $1,351. $1,549. $1,635. $1,856.54� 54� 29� ILTRD(S/B4/T4)(SG/SC)544( )( )( )( )( )( )( ) 1,388. 1,600. 1,703. 1,944.60� 60� 29� ILTRD(S/B4/T4)(SG/SC)604( )( )( )( )( )( )( ) 1,434. 1,662. 1,784. 2,049.
*Available with Glides and Casters.
Order Code
Example: ILTRDSSG484
IL Islands Collection byKnoll�
T TableRD RoundS Edge (S/B4/T4)SG Foot (SG/SC)48 Size4 29� HighN Grommet option( ) Grommet finish(114) Worksurface finish(SYN) Edge finish(114) Top plate finish(114) Leg finish
Specification Information
To order please specify patternnumber including:1. Grommet option:
N = None (no grommet)D8 = Narrow slot 8�W (48� &54�)D12 = Narrow slot 12�W (60�only)S = Power square (All sizesexcept 30�D)
2. Grommet finish:N = Not applicableD8/D12 = B=Black, W=White(textured)S = 111, 114, 115, 117
3. Worksurface finish:L, V1, V2, V3
4. Edge finish:Complementary synthetic
5. Top plate finish:Painted/texturedPolished aluminum
6. Leg finishPainted/texturedPolished aluminum
All Worksurfaces are 1 1/4� thick .
Edges:S = Square EdgeB4 = Thin beveled edge four sidesT4 = Thick beveled edge four sides
*Foot:SG = GlideSC = Caster
Height 29� is to top of worksurface.
Application Notes
The following upcharges apply:Beveled Edge (B4 & T4): $500Casters: $30Grommets D8 & D12: $80Polished finish: $225 (Top plate,leg or both)
All electrical accessories arespecified separately.
Refer to Accessories section forelectrical component pricing.
Islands Collection by Knoll®
16
Straight Leg - Desk Height29� HighSquare Tables with Square and Curved Corners
description d w h pattern no. L V1 V2 V3
Square Table29� High
36� 36� 29� ILTSQ(S/B4/T4)(SG/SC)364( )( )( )( )( )( )( ) $1,137. $1,260. $1,316. $1,391.42� 42� 29� ILTSQ(S/B4/T4)(SG/SC)424( )( )( )( )( )( )( ) 1,169. 1,304. 1,374. 1,466.48� 48� 29� ILTSQ(S/B4/T4)(SG/SC)484( )( )( )( )( )( )( ) 1,202. 1,376. 1,461. 1,579.54� 54� 29� ILTSQ(S/B4/T4)(SG/SC)544( )( )( )( )( )( )( ) 1,243. 1,431. 1,534. 1,674.60� 60� 29� ILTSQ(S/B4/T4)(SG/SC)604( )( )( )( )( )( )( ) 1,288. 1,493. 1,615. 1,780.
*Available with Glides and Casters.
Square Table with curved corners29� High
36� 36� 29� ILTSC(S/B4/T4)(SG/SC)364( )( )( )( )( )( )( ) 1,137. 1,260. 1,316. 1,391.42� 42� 29� ILTSC(S/B4/T4)(SG/SC)424( )( )( )( )( )( )( ) 1,169. 1,304. 1,374. 1,466.48� 48� 29� ILTSC(S/B4/T4)(SG/SC)484( )( )( )( )( )( )( ) 1,202. 1,376. 1,461. 1,579.54� 54� 29� ILTSC(S/B4/T4)(SG/SC)544( )( )( )( )( )( )( ) 1,243. 1,431. 1,534. 1,674.60� 60� 29� ILTSC(S/B4/T4)(SG/SC)604( )( )( )( )( )( )( ) 1,288. 1,493. 1,615. 1,780.
*Available with Glides and Casters.
Order Code
Example: ILTSQSSG364
IL Island Collection byKnoll�
T TableSQ Square,
SC=Square with Curvedcorners
S Edge (S/B4/T4)SG Foot (SG/SC)36 Size4 29� HighN Grommet option( ) Grommet finish(114) Worksurface finish(SYN) Edge finish(114) Top plate finish(114) Leg finish
Specification Information
To order please specify patternnumber including:1. Grommet option:
N = None (no grommet)D4 = Narrow slot 4�W (36�, 42�)D8 = Narrow slot 8�W (48� &54�)D12 = Narrow slot 12�W (60�only)S = Power square (All sizesexcept 30�D)All grommets are centered on theworksurface.
2. Grommet finish:N = Not applicableD4/D8/D12 = B=Black,W=White (textured)S = 111, 114, 115, 117
3. Worksurface finish:L, V1, V2, V3
4. Edge finish:Complementary synthetic
5. Top plate finish:Painted/texturedPolished aluminum
6. Leg finishPainted/texturedPolished aluminum
All Worksurfaces are 1 1/4� thick .
Edges:S = Square EdgeB4 = Thin beveled edge four sidesT4 = Thick beveled edge four sides
*Foot:SG = GlideSC = Caster
Height 29� is to top of worksurface.
Application Notes
The following upcharges apply:Beveled Edge (B4 & T4): $650 forSquare TableBeveled Edge (B4 & T4): $500 forSoft Square TableCasters: $30Grommets D4, D8 & D12: $80Polished finish: $225 (Top plate,leg or both)
All electrical accessories arespecified separately.
Refer to Accessories section forelectrical component pricing.
Islands Collection by Knoll®
17
Straight Leg - Desk Height29� HighSoft Square Tables
description d w h pattern no. L V1 V2 V3
Soft Square Table29� High
42� 42� 29� ILTSS(S/B4/T4)(SG/SC)424( )( )( )( )( )( )( ) $1,169. $1,304. $1,374. $1,516.48� 48� 29� ILTSS(S/B4/T4)(SG/SC)484( )( )( )( )( )( )( ) 1,207. 1,354. 1,440. 1,602.54� 54� 29� ILTSS(S/B4/T4)(SG/SC)544( )( )( )( )( )( )( ) 1,243. 1,431. 1,534. 1,724.60� 60� 29� ILTSS(S/B4/T4)(SG/SC)604( )( )( )( )( )( )( ) 1,288. 1,493. 1,615. 1,830.
*Available with Glides and Casters.
Example: ILTSSSSG424
IL Island Collection byKnoll�
T TableSS Soft SquareS Edge (S/B4/T4)SG Foot (SG/SC)42 Size4 29� HighN Grommet option( ) Grommet finish(114) Worksurface finish(SYN) Edge finish(114) Top plate finish(114) Leg finish
Specification Notes
To order please specify patternnumber including:1. Grommet option:
N = None (no grommet)D4 = Narrow slot 4�W (42� only)D8 = Narrow slot 8�W (48� &54�)D12 = Narrow slot 12�W (60�only)S = Power square (All sizes)All grommets are centered on theworksurface.
2. Grommet finish:N = Not applicableD4/D8/D12 = B=Black,W=White (textured)S = 111, 114, 115, 117
3. Worksurface finish:L, V1, V2, V3
4. Edge finish:Complementary synthetic
5. Top plate finish:Painted/texturedPolished aluminum
6. Leg finishPainted/texturedPolished aluminum
All Worksurfaces are 1 1/4� thick .
Edges:S = Square EdgeB4 = Thin beveled edge four sidesT4 = Thick beveled edge four sides
*Foot:SG = GlideSC = Caster
Height 29� is to top of worksurface.
Application Notes
The following upcharges apply:Beveled Edge (B4 & T4): $500Casters: $30Grommets D4, D8 & D12: $80Polished finish: $225 (Top plate,leg or both)
All electrical accessories arespecified separately.
Refer to Accessories section forelectrical component pricing.
Islands Collection by Knoll®
18
Straight Leg - Desk Height29� HighSoft Pentagon and Soft Pentagon Type 2 Tables
description d w h pattern no. L V1 V2 V3
Soft Pentagon Table29� High
48� 48� 29� ILTPT(S/B4/T4)(SG/SC)484( )( )( )( )( )( ) $1,642. $1,837. $1,922. $2,154.54� 54� 29� ILTPT(S/B4/T4)(SG/SC)544( )( )( )( )( )( ) 1,683. 1,892. 1,995. 2,249.60� 60� 29� ILTPT(S/B4/T4)(SG/SC)604( )( )( )( )( )( ) 1,728. 1,954. 2,076. 2,354.
*Available with Glides and Casters.
Soft Pentagon TablesType 2, 29� High
48� 48� 29� ILTP2(S/B4/T4)(SG/SC)484( )( )( )( )( )( ) 1,642. 1,837. 1,922. 2,154.54� 54� 29� ILTP2(S/B4/T4)(SG/SC)544( )( )( )( )( )( ) 1,683. 1,892. 1,995. 2,249.60� 60� 29� ILTP2(S/B4/T4)(SG/SC)604( )( )( )( )( )( ) 1,728. 1,892. 1,995. 2,249.
*Available with Glides and Casters.
Order Code
Example: ILTPTSSG484
IL Islands Collection byKnoll�
T TablePT Soft PentagonS Edge (S/B4/T4)SG Foot (SG/SC)48 Size4 29� HighN Grommet option( ) Grommet finish(114) Worksurface finish(SYN) Edge finish(114) Top plate finish(114) Leg finish
Specification Information
To order please specify patternnumber including:1. Grommet option:
N = None (no grommet)D8 = Narrow slot 8�W (48� &54�)D12 = Narrow slot 12�W (60�only)S = Power square (All sizes)All grommets are centered on theworksurface.
2. Grommet finish:N = Not applicableD8/D12 = B=Black, W=White(textured)S = 111, 114, 115, 117
3. Worksurface finish:L, V1, V2, V3
4. Edge finish:Complementary synthetic
5. Top plate finish:Painted/texturedPolished aluminum
6. Leg finishPainted/texturedPolished aluminum
All Worksurfaces are 1 1/4� thick .
Edges:S = Square EdgeB4 = Thin beveled edge four sidesT4 = Thick beveled edge four sides
*Foot:SG = GlideSC = Caster
Height 29� is to top of worksurface.
Application Notes
The following upcharges apply:Beveled Edge (B4 & T4): $500Casters: $30Grommets D8 & D12: $80Polished finish: $275 (Top plate,leg or both)
All electrical accessories arespecified separately.
Refer to Accessories section forelectrical component pricing.
Islands Collection by Knoll®
19
Straight Leg - Desk Height29� HighOrganic Pentagon Type A and B
description d w h pattern no. L V1 V2 V3
Organic Pentagon TableType A, 29� High
48� 48� 29� ILTOPA(S/B4/T4)(SG/SC)484( )( )( )( )( )( ) $1,642. $1,837. $1,922. $2,154.54� 54� 29� ILTOPA(S/B4/T4)(SG/SC)544( )( )( )( )( )( ) 1,683. 1,892. 1,995. 2,249.60� 60� 29� ILTOPA(S/B4/T4)(SG/SC)604( )( )( )( )( )( ) 1,728. 1,954. 2,076. 2,354.
*Available with Glides and Casters.
Organic Pentagon TableType B, 29� High
48� 48� 29� ILTOPB(S/B4/T4)(SG/SC)484( )( )( )( )( )( ) 1,642. 1,837. 1,922. 2,154.54� 54� 29� ILTOPB(S/B4/T4)(SG/SC)544( )( )( )( )( )( ) 1,683. 1,892. 1,995. 2,249.60� 60� 29� ILTOPB(S/B4/T4)(SG/SC)604( )( )( )( )( )( ) 1,728. 1,954. 2,076. 2,354.
*Available with Glides and Casters.
Order Code
Example: ILTOPASSG484
IL Islands Collection byKnoll�
T TableOPA Organic Pentagon Type
AS Edge (S/B4/T4)SG Foot (SG/SC)48 Size4 29� HighN Grommet option( ) Grommet finish(114) Worksurface finish(SYN) Edge finish(114) Top plate finish(114) Leg finish
Specification Information
To order please specify patternnumber including:1. Grommet option:
N = None (no grommet)D8 = Narrow slot 8�W (48� &54�)D12 = Narrow slot 12�W (60�only)S = Power square (All sizes)All grommets are centered on theworksurface.
2. Grommet finish:N = Not applicableD8/D12 = B=Black, W=White(textured)S = 111, 114, 115, 117
3. Worksurface finish:L, V1, V2, V3
4. Edge finish:Complementary synthetic
5. Top plate finish:Painted/texturedPolished aluminum
6. Leg finishPainted/texturedPolished aluminum
All Worksurfaces are 1 1/4� thick .
Edges:S = Square EdgeB4 = Thin beveled edge four sidesT4 = Thick beveled edge four sides
*Foot:SG = GlideSC = Caster
Height 29� is to top of worksurface.
Application Notes
The following upcharges apply:Beveled Edge (B4 & T4): $500Casters: $30Grommets D8 & D12: $80Polished finish: $275 (Top plate,leg or both)
All electrical accessories arespecified separately.
Refer to Accessories section forelectrical component pricing.
Islands Collection by Knoll®
20
Straight Leg - Desk Height29� HighOrganic Triangle, Left and Right
description d w h pattern no. L V1 V2 V3
Organic triangle Table29� High
Left hand shown
36� 44� 29� ILTOT(L/R)(S/B4/T4)(SG/SC)36444( )( )( )( )( )( ) $1,344. $1,523. $1,587. $1,793.42� 51� 29� ILTOT(L/R)(S/B4/T4)(SG/SC)42514( )( )( )( )( )( ) 1,381. 1,573. 1,653. 1,879.48� 59� 29� ILTOT(L/R)(S/B4/T4)(SG/SC)48594( )( )( )( )( )( ) 1,427. 1,635. 1,735. 1,986.54� 66� 29� ILTOT(L/R)(S/B4/T4)(SG/SC)54664( )( )( )( )( )( ) 1,476. 1,700. 1,822. 2,099.60� 74� 29� ILTOT(L/R)(S/B4/T4)(SG/SC)60744( )( )( )( )( )( ) 1,534. 1,779. 1,926. 2,234.
*Available with Glides and Casters.
*Available with Glides and Casters.
Order Code
Example: ILTOTLSSG36444
IL Islands Collection byKnoll�
T TableOT Organic TriangleL Left hand (R=Right
hand)S Edge (S/B4/T4)SG Foot (SG/SC)36 Depth44 Width4 29� HighN Grommet option( ) Grommet finish(114) Worksurface finish(SYN) Edge finish(114) Top plate finish(114) Leg finish
Specification Information
To order please specify patternnumber including:1. Grommet option:
N = None (no grommet)D8 = Narrow slot 8�W (3644,4251)D12 = Narrow slot 12�W (4859,5460, 6074)S = Power square (All sizes)All grommets are centered on theworksurface.
2. Grommet finish:N = Not applicableD8/D12 = B=Black, W=White(textured)S = 111, 114, 115, 117
3. Worksurface finish:L, V1, V2, V3
4. Edge finish:Complementary synthetic
5. Top plate finish:Painted/texturedPolished aluminum
6. Leg finishPainted/texturedPolished aluminum
All Worksurfaces are 1 1/4� thick .
Edges:S = Square EdgeB4 = Thin beveled edge four sidesT4 = Thick beveled edge four sides
*Foot:SG = GlideSC = Caster
Height 29� is to top of worksurface.
Application Notes
The following upcharges apply:Beveled Edge (B4 & T4): $500Casters: $30Grommets D8 & D12: $80Polished finish: $225 (Top plate,leg or both)
All electrical accessories arespecified separately.
Refer to Accessories section forelectrical component pricing.
Islands Collection by Knoll®
21
Straight Leg - Desk Height29� HighOrganic Elongated Pentagon, Left and Right
description d w h pattern no. L V1 V2 V3
Organic elongatd pentagonTable, 29� High
Left hand shown
35� 60� 29� ILTOE(L/R)(S/B4/T4)(SG/SC)35604( )( )( )( )( )( )( ) $1,378. $1,569. $1,648. $1,872.39� 66� 29� ILTOE(L/R)(S/B4/T4)(SG/SC)39664( )( )( )( )( )( )( ) 1,410. 1,612. 1,704. 1,945.42� 72� 29� ILTOE(L/R)(S/B4/T4)(SG/SC)42724( )( )( )( )( )( )( ) 1,440. 1,652. 1,758. 2,015.42� 72� 29� ILTOE(L/R)(S/B4/T4)(SG/SC)45784( )( )( )( )( )( )( ) 1,472. 1,695. 1,815. 2,090.48� 84� 29� ILTOE(L/R)(S/B4/T4)(SG/SC)48844( )( )( )( )( )( )( ) 1,507. 1,742. 1,877. 2,170.
*Available with Glides and Casters.
Order Code
Example: ILTOELSSG35604
IL Islands Collection byKnoll�
T TableOE Organic Elongated
PentagonL Left hand (R=Right
hand)S Edge (S/B4/T4)SG Foot (SG/SC)35 Depth60 Width4 271/2� HighN Grommet option( ) Grommet finish(114) Worksurface finish(SYN) Edge finish(114) Top plate finish(114) Leg finish
Specification Information
To order please specify patternnumber including:1. Grommet option:
N = None (no grommet)D12 = Narrow slot 12�W (Allsizes)S = Power square (All sizes)
2. Grommet Location:CB = Centered Back Edge (Shortedge)CF = Centered Front Edge (Longedge)
3. Grommet finish:N = Not applicableD12 = B=Black, W=White(textured)S = 111, 114, 115, 117
4. Worksurface finish:L, V1, V2, V3
5. Edge finish:Complementary synthetic
6. Top plate finish:Painted/texturedPolished aluminum
7. Leg finishPainted/texturedPolished aluminum
All Worksurfaces are 1 1/4� thick .
Edges:S = Square EdgeB4 = Thin beveled edge four sidesT4 = Thick beveled edge four sides
*Foot:SG = GlideSC = Caster
Height 29� is to top of worksurface.
Application Notes
The following upcharges apply:Beveled Edge (B4 & T4): $500Casters: $30Grommets D12: $80Polished finish: $225 (Top plate,leg or both)
All electrical accessories arespecified separately.
Refer to Accessories section forelectrical component pricing.
Islands Collection by Knoll®
22
Straight Leg - Desk Height29� HighOrganic Rectangle, Left and Right
description d w h pattern no. L V1 V2 V3
Organic rectangle Table29� High
Left hand shown
33� 60� 29� ILTOR(L/R)(S/B4/T4)(SG/SC)33604( )( )( )( )( )( )( ) $1,370. $1,558. $1,634. $1,854.33� 72� 29� ILTOR(L/R)(S/B4/T4)(SG/SC)33724( )( )( )( )( )( )( ) 1,396. 1,594. 1,681. 1,915.39� 60� 29� ILTOR(L/R)(S/B4/T4)(SG/SC)39604( )( )( )( )( )( )( ) 1,394. 1,591. 1,676. 1,909.39� 72� 29� ILTOR(L/R)(S/B4/T4)(SG/SC)39724( )( )( )( )( )( )( ) 1,425. 1,633. 1,732. 1,982.
*Available with Glides and Casters.
Order Code
Example: ILTORLSSG33604
IL Islands Collection byKnoll�
T TableOR Organic RectangleL Left hand (R=Right
hand)S Edge (S/B4/T4)SG Foot (SG/SC)33 Depth60 Width4 29� HighN Grommet option( ) Grommet finish(114) Worksurface finish(SYN) Edge finish(114) Top plate finish(114) Leg finish
Specification Information
To order please specify patternnumber including:1. Grommet option:
N = None (no grommet)D8 = Narrow slot 8�W (All sizes)S = Power square (All sizes)
2. Grommet location:CB = Centered Back Edge (Shortedge)CF = Centered Front Edge (Longedge)
3. Grommet finish:N = Not applicableD8 = B=Black, W=White(textured)S = 111, 114, 115, 117
4. Worksurface finish:L, V1, V2, V3
5. Edge finish:Complementary synthetic
6. Top plate finish:Painted/texturedPolished aluminum
7. Leg finishPainted/texturedPolished aluminum
All Worksurfaces are 1 1/4� thick .
Edges:S = Square EdgeB4 = Thin beveled edge four sidesT4 = Thick beveled edge four sides
*Foot:SG = GlideSC = Caster
Height 29� is to top of worksurface.
Application Notes
The following upcharges apply:Beveled Edge (B4 & T4): $500Casters: $30Grommets D8: $80Polished finish: $225 (Top plate,leg or both)
All electrical accessories arespecified separately.
Refer to Accessories section forelectrical component pricing.
Islands Collection by Knoll®
23
Straight Leg - Desk Height29� HighRectilinear Tables with Square Corners
description d w h pattern no. L V1 V2 V3
Rectilnear Table withsquare corners
24� 48� 29� ILTRL(S/B4/T4)(SG/SC)48244( )( )( )( )( )( )( ) $1,125. $1,216. $1,264. $1,373.54� 29� ILTRL(S/B4/T4)(SG/SC)54244( )( )( )( )( )( )( ) 1,137. 1,229. 1,282. 1,397.60� 29� ILTRL(S/B4/T4)(SG/SC)60244( )( )( )( )( )( )( ) 1,148. 1,243. 1,300. 1,420.66� 29� ILTRL(S/B4/T4)(SG/SC)66244( )( )( )( )( )( )( ) 1,162. 1,281. 1,346. 1,480.72� 29� ILTRL(S/B4/T4)(SG/SC)72244( )( )( )( )( )( )( ) 1,173. 1,294. 1,363. 1,502.78� 29� ILTRL(S/B4/T4)(SG/SC)78244( )( )( )( )( )( )( ) 1,184. 1,308. 1,381. 1,525.78� 29� ILTRL(S/B4/T4)(SG/SC)84244( )( )( )( )( )( )( ) 1,197. 1,351. 1,428. 1,586.
30� 48� 29� ILTRL(S/B4/T4)(SG/SC)48304( )( )( )( )( )( )( ) 1,148. 1,423. 1,300. 1,420.54� 29� ILTRL(S/B4/T4)(SG/SC)54304( )( )( )( )( )( )( ) 1,162. 1,260. 1,323. 1,450.60� 29� ILTRL(S/B4/T4)(SG/SC)60304( )( )( )( )( )( )( ) 1,176. 1,278. 1,345. 1,479.66� 29� ILTRL(S/B4/T4)(SG/SC)66304( )( )( )( )( )( )( ) 1,192. 1,318. 1,394. 1,542.72� 29� ILTRL(S/B4/T4)(SG/SC)72304( )( )( )( )( )( )( ) 1,206. 1,335. 1,416. 1,571.78� 29� ILTRL(S/B4/T4)(SG/SC)78304( )( )( )( )( )( )( ) 1,219. 1,351. 1,438. 1,599.84� 29� ILTRL(S/B4/T4)(SG/SC)84304( )( )( )( )( )( )( ) 1,234. 1,397. 1,488. 1,664.
36� 48� 29� ILTRL(S/B4/T4)(SG/SC)48364( )( )( )( )( )( )( ) 1,171. 1,271. 1,336. 1,467.54� 29� ILTRL(S/B4/T4)(SG/SC)54364( )( )( )( )( )( )( ) 1,188. 1,291. 1,363. 1,502.60� 29� ILTRL(S/B4/T4)(SG/SC)60364( )( )( )( )( )( )( ) 1,205. 1,312. 1,390. 1,537.66� 29� ILTRL(S/B4/T4)(SG/SC)66364( )( )( )( )( )( )( ) 1,222. 1,355. 1,442. 1,605.72� 29� ILTRL(S/B4/T4)(SG/SC)72364( )( )( )( )( )( )( ) 1,239. 1,375. 1,469. 1,640.78� 29� ILTRL(S/B4/T4)(SG/SC)78364( )( )( )( )( )( )( ) 1,255. 1,395. 1,495. 1,674.84� 29� ILTRL(S/B4/T4)(SG/SC)84364( )( )( )( )( )( )( ) 1,272. 1,443. 1,549. 1,744.
*Available with Glides and Casters.
Order Code
Example: ILTRLSSG48244
IL Islands Collection byKnoll�
T TableRL Rectilinear Square
CornerS Edge (S/B4/T4)SG Foot (SG/SC)48 Width24 Depth4 29� HighN Grommet option( ) Grommet finish(CC) Grommet location(114) Worksurface finish(SYN) Edge finish(114) Top plate finish(114) Leg finish
Specification Information
To order please specify patternnumber including:1. Grommet option:
N = None (no grommet)D12 = Narrow slot 12�W (Allsizes)D30 = Narrow slot 30�W(Available on 60� and 96�w tops)S = Power square (All sizes)
2. Grommet finish:N = Not applicableD12/D30 = B=Black, W=White(textured)S = 111, 114, 115, 117
3. Grommet location:CC = Centered/Centered(Centered on both length andwidth)CB = Centered/Back(Centered across the width,recessed from back edge)
4. Worksurface finish:L, V1, V2, V3
5. Edge finish:Complementary synthetic
6. Top plate finish:Painted/texturedPolished aluminum
7. Leg finishPainted/texturedPolished aluminum
All Worksurfaces are 1 1/4� thick .
Edges:S = Square EdgeB4 = Thin beveled edge four sidesT4 = Thick beveled edge four sides
*Foot:SG = GlideSC = Caster
Height 29� is to top of worksurface.
Application Notes
The following upcharges apply:Beveled Edge (B4 & T4): $650Casters: $30Grommets D12: $80Grommets D30: $100Polished finish: $225 (Top plate,leg or both)
All electrical accessories arespecified separately.
Refer to Accessories section forelectrical component pricing.
Islands Collection by Knoll®
24
Straight Leg - Desk Height29� HighRectilinear Tables with Curved Corners
description d w h pattern no. L V1 V2 V3
Rectilinear Table withCurved corners
24� 48� 29� ILTRC(S/B4/T4)(SG/SC)48244( )( )( )( )( )( )( ) $1,125. $1,396. $1,394. $1,607.54� 29� ILTRC(S/B4/T4)(SG/SC)54244( )( )( )( )( )( )( ) 1,137. 1,409. 1,412. 1,631.60� 29� ILTRC(S/B4/T4)(SG/SC)60244( )( )( )( )( )( )( ) 1,148. 1,423. 1,430. 1,654.66� 29� ILTRC(S/B4/T4)(SG/SC)66244( )( )( )( )( )( )( ) 1,162. 1,448. 1,459. 1,692.72� 29� ILTRC(S/B4/T4)(SG/SC)72244( )( )( )( )( )( )( ) 1,173. 1,462. 1,477. 1,715.72� 29� ILTRC(S/B4/T4)(SG/SC)78244( )( )( )( )( )( )( ) 1,184. 1,475. 1,494. 1,737.84� 29� ILTRC(S/B4/T4)(SG/SC)84244( )( )( )( )( )( )( ) 1,197. 1,523. 1,550. 1,810.
30� 48� 29� ILTRC(S/B4/T4)(SG/SC)48304( )( )( )( )( )( )( ) 1,148. 1,423. 1,430. 1,654.54� 29� ILTRC(S/B4/T4)(SG/SC)54304( )( )( )( )( )( )( ) 1,162. 1,440. 1,453. 1,684.60� 29� ILTRC(S/B4/T4)(SG/SC)60304( )( )( )( )( )( )( ) 1,176. 1,458. 1,475. 1,713.66� 29� ILTRC(S/B4/T4)(SG/SC)66304( )( )( )( )( )( )( ) 1,192. 1,485. 1,507. 1,754.72� 29� ILTRC(S/B4/T4)(SG/SC)72304( )( )( )( )( )( )( ) 1,206. 1,502. 1,529. 1,783.78� 29� ILTRC(S/B4/T4)(SG/SC)78304( )( )( )( )( )( )( ) 1,219. 1,518. 1,551. 1,811.84� 29� ILTRC(S/B4/T4)(SG/SC)84304( )( )( )( )( )( )( ) 1,234. 1,569. 1,610. 1,888.
36� 48� 29� ILTRC(S/B4/T4)(SG/SC)48364( )( )( )( )( )( )( ) 1,171. 1,451. 1,466. 1,701.54� 29� ILTRC(S/B4/T4)(SG/SC)54364( )( )( )( )( )( )( ) 1,188. 1,471. 1,493. 1,736.60� 29� ILTRC(S/B4/T4)(SG/SC)60364( )( )( )( )( )( )( ) 1,205. 1,492. 1,520. 1,771.66� 29� ILTRC(S/B4/T4)(SG/SC)66364( )( )( )( )( )( )( ) 1,222. 1,522. 1,556. 1,818.72� 29� ILTRC(S/B4/T4)(SG/SC)72364( )( )( )( )( )( )( ) 1,239. 1,542. 1,582. 1,852.78� 29� ILTRC(S/B4/T4)(SG/SC)78364( )( )( )( )( )( )( ) 1,255. 1,562. 1,609. 1,887.84� 29� ILTRC(S/B4/T4)(SG/SC)84364( )( )( )( )( )( )( ) 1,272. 1,615. 1,671. 1,967.
*Available with Glides and Casters.
Order Code
Example: ILTRCSSG48244
IL Islands Collection byKnoll�
T TableRC Rectilinear with
Curved CornerS Edge (S/B4/T4)SG Foot (SG/SC)48 Width24 Depth4 29� HighN Grommet option( ) Grommet finish(CC) Grommet location(114) Worksurface finish(SYN) Edge finish(114) Top plate finish(114) Leg finish
Specification Information
To order please specify patternnumber including:1. Grommet option:
N = None (no grommet)D12 = Narrow slot 12�W (Allsizes)D30 = Narrow slot 30�W(Available on 60� to 84�w tops)S = Power square (All sizes)
2. Grommet finish:N = Not applicableD12/D30 = B=Black, W=White(textured)S = 111, 114, 115, 117
3. Grommet location:CC = Centered/Centered(Centered on both length andwidth)CB = Centered/Back(Centered across the width,recessed from back edge)
4. Worksurface finish:L, V1, V2, V3
5. Edge finish:Complementary synthetic
6. Top plate finish:Painted/texturedPolished aluminum
7. Leg finishPainted/texturedPolished aluminum
All Worksurfaces are 1 1/4� thick .
Edges:S = Square EdgeB4 = Thin beveled edge four sidesT4 = Thick beveled edge four sides
*Foot:SG = GlideSC = Caster
Height 29� is to top of worksurface.
Application Notes
The following upcharges apply:Beveled Edge (B4 & T4): $500Casters: $30Grommets D12: $80Grommets D30: $100Polished finish: $225 (Top plate,leg or both)
All electrical accessories arespecified separately.
Refer to Accessories section forelectrical component pricing.
Islands Collection by Knoll®
25
Straight Leg - Desk Height29� High120° Degree Tables
description d w h pattern no. L V1 V2 V3
120° Degree Table withSquare corners
24� 33� 29� ILTVS(S/B4/T4)(SG/SC)24334( )( )( )( )( )( )( ) $1,291. $1,452. $1,493. $1,671.30� 36� 29� ILTVS(S/B4/T4)(SG/SC)30364( )( )( )( )( )( )( ) 1,310. 1,477. 1,527. 1,715.
*Available with Glides and Casters.
120° Degree Table withCurved corners
24� 33� 29� ILTVR(S/B4/T4)(SG/SC)24334( )( )( )( )( )( )( ) 1,291. 1,452. 1,493. 1,671.30� 36� 29� ILTVR(S/B4/T4)(SG/SC)30364( )( )( )( )( )( )( ) 1,310. 1,477. 1,527. 1,715.
*Available with Glides and Casters.
Order Code
Example: ILTVSSSG24334
IL Islands Collection byKnoll�
T TableVS 120° Table with Square
corners(CY=with Curvedcorners)
S Edge (S/B4/T4)SG Foot (SG/SC)24 Depth33 Width4 29� HighN Grommet option( ) Grommet finish(114) Worksurface finish(SYN) Edge finish(114) Top plate finish(114) Leg finish
Specification Information
To order please specify patternnumber including:1. Grommet option:
N = None (no grommet)D8 = Narrow slot 8�W (All sizes)S = Power square
2. Grommet finish:N = Not applicableD8 = B=Black, W=White(textured)S = 111, 114, 115, 117
3. Worksurface finish:L, V1, V2, V3
4. Edge finish:Complementary synthetic
5. Top plate finish:Painted/texturedPolished aluminum
6. Leg finishPainted/texturedPolished aluminum
All Worksurfaces are 1 1/4� thick .
Edges:S = Square EdgeB4 = Thin beveled edge four sidesT4 = Thick beveled edge four sides
*Foot:SG = GlideSC = Caster
Height 29� is to top of worksurface.
Application Notes
The following upcharges apply:Beveled Edge (B4 & T4): $500Casters: $30Grommets D8: $80Polished finish: $225 (Top plate,leg or both)
All electrical accessories arespecified separately.
Refer to Accessories section forelectrical component pricing.
Islands Collection by Knoll®
26
Straight Leg - Desk Height29� HighCairo Shaped Tables
description d w h pattern no. L V1 V2 V3
Cairo Shaped Table withSquare corners
30� 52� 29� ILTCS(S/B4/T4)(SG/SC)52304( )( )( )( )( )( )( ) $1,342. $1,521. $1,584. $1,789.36� 63� 29� ILTCS(S/B4/T4)(SG/SC)63364( )( )( )( )( )( )( ) 1,389. 1,584. 1,668. 1,898.
Cairo Shaped Table withCurved corners
30� 52� 29� ILTCY(S/B4/T4)(SG/SC)52304( )( )( )( )( )( )( ) 1,342. 1,521. 1,584. 1,789.36� 63� 29� ILTCY(S/B4/T4)(SG/SC)63364( )( )( )( )( )( )( ) 1,389. 1,584. 1,668. 1,898.
Order Code
Example: ILTCSSSG52304
IL Islands Collection byKnoll�
T TableCS Cairo with Square
cornersCY=with Curvedcorners)
S Edge (S/B4/T4)SG Foot (SG/SC)52 Width30 Depth4 29� HighN Grommet option( ) Grommet finish(CC) Grommet location(114) Worksurface finish(SYN) Edge finish(114) Top plate finish(114) Leg finish
Specification Information
To order please specify patternnumber including:1. Grommet option:
N = None (no grommet)D12 = Narrow slot 12�W (Allsizes)S = Power square
2. Grommet finish:N = Not applicableD12 = B=Black, W=White(textured)S = 111, 114, 115, 117
3. Grommet location:CB = Centered back edge (shortedge)CF = Centered front edge (longedge)
4. Worksurface finish:L, V1, V2, V3
5. Edge finish:Complementary synthetic
6. Top plate finish:Painted/texturedPolished aluminum
7. Leg finishPainted/texturedPolished aluminum
All Worksurfaces are 1 1/4� thick .
Edges:S = Square EdgeB4 = Thin beveled edge four sidesT4 = Thick beveled edge four sides
*Foot:SG = GlideSC = Caster
Height 29� is to top of worksurface.
Application Notes
The following upcharges apply:Beveled Edge (B4 & T4): $500Casters: $30Grommets D12: $80Polished finish: $225 (Top plate,leg or both)
All electrical accessories arespecified separately.
Refer to Accessories section forelectrical component pricing.
Islands Collection by Knoll®
27
X-Base Tables - Occasional Heights12�, 15� and 18� HighRound Tables
description d w h pattern no. L V1 V2 V3
Round Table12� High
30� 12� ILTRD(S/B/T)X301( )( )( )( )( )( ) $954. $1,121. $1,165. $1,335.36� 12� ILTRD(S/B/T)X361( )( )( )( )( )( ) 982. 1,157. 1,213. 1,397.42� 12� ILTRD(S/B/T)X421( )( )( )( )( )( ) 1,014. 1,200. 1,269. 1,470.
*Available with Glides only.
Round Table15� High
30� 15� ILTRD(S/B/T)X302( )( )( )( )( )( ) 954. 1,121. 1,165. 1,335.36� 15� ILTRD(S/B/T)X362( )( )( )( )( )( ) 982. 1,157. 1,213. 1,397.42� 15� ILTRD(S/B/T)X422( )( )( )( )( )( ) 1,014. 1,200. 1,269. 1,470.
*Available with Glides only.
Round Table18� High
30� 18� ILTRD(S/B/T)(X/XC)303( )( )( )( )( )( ) 954. 1,121. 1,165. 1,335.36� 18� ILTRD(S/B/T)(X/XC)363( )( )( )( )( )( ) 982. 1,157. 1,213. 1,397.42� 18� ILTRD(S/B/T)(X/XC)423( )( )( )( )( )( ) 1,014. 1,200. 1,269. 1,470.
*Available with Glides and Casters.
Order Code
Example: ILTRDSX301
IL Islands Collection byKnoll�
T TableRD RoundS Edge (S/B/T)X Foot (X/XC)30 Size1 Height (1/2/3)N Grommet option( ) Grommet finish(114) Worksurface finish(SYN) Edge finish(114) Cone finish(114) Foot finish
Specification Information
To order please specify patternnumber including:1. Grommet option:
N = None (no grommet)D4 = Narrow slot 4�W (36�, 42�)S = Power square (36�, 42�)
2. Grommet finish:N = Not applicableD4 = B=Black, W=White(textured)S = 111, 114, 115, 117
3. Worksurface finish:L, V1, V2, V3
4. Edge finish:Complementary synthetic
5. Cone finish (36� & 42�):Painted/texturedPolished aluminum
6. Column finishPainted/texturedPolished aluminum
7. Foot finishPainted/texturedPolished aluminum
All Worksurfaces are 1 1/4� thick.
Edges:S = Square EdgeB = Thin beveled edge four sidesT = Thick beveled edge four sides
*Foot:X = GlideXC = Caster
Height (to top of worksurface):1 = 12�H2 = 15�H3 = 18�H
Application Notes
The following upcharges apply:Beveled Edge (B4 & T4): $500Casters: $30Grommets D4: $80Polished finish: $100 (Cone,Column, Foot or all)
All electrical accessories arespecified separately.
Refer to Accessories section forelectrical component pricing.
Islands Collection by Knoll®
28
X-Base Tables - Occasional Heights12�, 15� and 18� HighSquare Tables
description d w h pattern no. L V1 V2 V3
Square Table12� High
30� 12� ILTSQ(S/B/T)X301( )( )( )( )( )( ) $809. $924. $968. $1,078.36� 12� ILTSQ(S/B/T)X361( )( )( )( )( )( ) 837. 960. 1,016. 1,141.42� 12� ILTSQ(S/B/T)X421( )( )( )( )( )( ) 869. 1,004. 1,074. 1,216.
*Available with Glides only.
Square Table15� High
30� 15� ILTSQ(S/B/T)X302( )( )( )( )( )( ) 809. 924. 968. 1,078.36� 15� ILTSQ(S/B/T)X362( )( )( )( )( )( ) 837. 960. 1,016. 1,141.42� 15� ILTSQ(S/B/T)X422( )( )( )( )( )( ) 869. 1,004. 1,074. 1,216.
*Available with Glides only.
Square Table18� High
30� 18� ILTSQ(S/B/T)(X/XC)303( )( )( )( )( )( ) 809. 924. 968. 1,078.36� 18� ILTSQ(S/B/T)(X/XC)363( )( )( )( )( )( ) 837. 960. 1,016. 1,141.42� 18� ILTSQ(S/B/T)(X/XC)423( )( )( )( )( )( ) 869. 1,004. 1,074. 1,216.
*Available with Glides and Casters.
Order Code
Example: ILTSQSX301
IL Islands Collection byKnoll�
T TableSQ SquareS Edge (S/B/T)X Foot (X/XC)30 Size1 Height (1/2/3)N Grommet option( ) Grommet finish(114) Worksurface finish(SYN) Edge finish(114) Cone finish(114) Foot finish
Specification Information
To order please specify patternnumber including:1. Grommet option:
N = None (no grommet)D4 = Narrow slot 4�W (36�, 42�)S = Power square (36�, 42�)
2. Grommet finish:N = Not applicableD4 = B=Black, W=White(textured)S = 111, 114, 115, 117
3. Worksurface finish:L, V1, V2, V3
4. Edge finish:Complementary synthetic
5. Cone finish (36� & 42�):Painted/texturedPolished aluminum
6. Column finishPainted/texturedPolished aluminum
7. Foot finishPainted/texturedPolished aluminum
All Worksurfaces are 1 1/4� thick.
Edges:S = Square EdgeB = Thin beveled edge four sidesT = Thick beveled edge four sides
*Foot:X = GlideXC = Caster
Height (to top of worksurface):1 = 12�H2 = 15�H3 = 18�H
Application Notes
The following upcharges apply:Beveled Edge (B4 & T4): $650Casters: $30Grommets D4: $80Polished finish: $100 (Cone,Column, Foot or all)
All electrical accessories arespecified separately.
Refer to Accessories section forelectrical component pricing.
Islands Collection by Knoll®
29
X-Base Tables - Occasional Heights12�, 15� and 18� HighSoft Square Tables
description d w h pattern no. L V1 V2 V3
Soft Square Table12� High
30� 12� ILTSS(S/B/T)X301( )( )( )( )( )( ) $809. $924. $968. $1,078.36� 12� ILTSS(S/B/T)X361( )( )( )( )( )( ) 837. 960. 1,016. 1,141.42� 12� ILTSS(S/B/T)X421( )( )( )( )( )( ) 869. 1,004. 1,074. 1,216.
*Available with Glides only.
Soft Square Table15� High
30� 15� ILTSS(S/B/T)X302( )( )( )( )( )( ) 809. 924. 968. 1,078.36� 15� ILTSS(S/B/T)X362( )( )( )( )( )( ) 837. 960. 1,016. 1,141.42� 15� ILTSS(S/B/T)X422( )( )( )( )( )( ) 869. 1,004. 1,074. 1,216.
*Available with Glides only.
Soft Square Table18� High
30� 18� ILTSS(S/B/T)(X/XC)303( )( )( )( )( )( ) 809. 924. 968. 1,078.36� 18� ILTSS(S/B/T)(X/XC)363( )( )( )( )( )( ) 837. 960. 1,016. 1,141.42� 18� ILTSS(S/B/T)(X/XC)423( )( )( )( )( )( ) 869. 1,004. 1,074. 1,216.
*Available with Glides and Casters.
Order Code
Example: ILTSSSX301
IL Islands Collection byKnoll�
T TableSS Soft SquareS Edge (S/B/T)X Foot (X/XC)30 Size1 Height (1/2/3)N Grommet option( ) Grommet finish(114) Worksurface finish(SYN) Edge finish(114) Cone finish(114) Foot finish
Specification Information
To order please specify patternnumber including:1. Grommet option:
N = None (no grommet)D4 = Narrow slot 4�W (36�, 42�)S = Power square (36�, 42�)
2. Grommet finish:N = Not applicableD4 = B=Black, W=White(textured)S = 111, 114, 115, 117
3. Worksurface finish:L, V1, V2, V3
4. Edge finish:Complementary synthetic
5. Cone finish (36� & 42�):Painted/texturedPolished aluminum
6. Column finishPainted/texturedPolished aluminum
7. Foot finishPainted/texturedPolished aluminum
All Worksurfaces are 1 1/4� thick.
Edges:S = Square EdgeB = Thin beveled edge four sidesT = Thick beveled edge four sides
*Foot:X = GlideXC = Caster
Height (to top of worksurface):1 = 12�H2 = 15�H3 = 18�H
Application Notes
The following upcharges apply:Beveled Edge (B4 & T4): $500Casters: $30Grommets D4: $80Polished finish: $100 (Cone,Column, Foot or all)
All electrical accessories arespecified separately.
Refer to Accessories section forelectrical component pricing.
Islands Collection by Knoll®
30
X-Base Tables - Occasional Heights12�, 15� and 18� HighSquare Tables with Curved Corners
description d w h pattern no. L V1 V2 V3
Square Table, 12� HighCurved Corners
30� 12� ILTSC(S/B/T)X301( )( )( )( )( )( ) $809. $924. $968. $1,078.36� 12� ILTSC(S/B/T)X361( )( )( )( )( )( ) 837. 960. 1,016. 1,141.42� 12� ILTSC(S/B/T)X421( )( )( )( )( )( ) 869. 1,004. 1,074. 1,216.
*Available with Glides only.
Square Table, 15� HighCurved Corners
30� 15� ILTSC(S/B/T)X302( )( )( )( )( )( ) 809. 924. 968. 1,078.36� 15� ILTSC(S/B/T)X362( )( )( )( )( )( ) 837. 960. 1,016. 1,141.42� 15� ILTSC(S/B/T)X422( )( )( )( )( )( ) 869. 1,004. 1,074. 1,216.
*Available with Glides only.
Square Table, 18� HighCurved Corners
30� 18� ILTSC(S/B/T)(X/XC)303( )( )( )( )( )( ) 809. 924. 968. 1,078.36� 18� ILTSC(S/B/T)(X/XC)363( )( )( )( )( )( ) 837. 960. 1,016. 1,141.42� 18� ILTSC(S/B/T)(X/XC)423( )( )( )( )( )( ) 869. 1,004. 1,074. 1,216.
*Available with Glides and Casters.
Order Code
Example: ILTSCSX301
IL Islands Collection byKnoll�
T TableSC Square table with curved
cornersS Edge (S/B/T)X Foot (X/XC)30 Size1 Height (1/2/3)N Grommet option( ) Grommet finish(114) Worksurface finish(SYN) Edge finish(114) Cone finish(114) Foot finish
Specification Information
To order please specify patternnumber including:1. Grommet option:
N = None (no grommet)D4 = Narrow slot 4�W (36�, 42�)S = Power square (36�, 42�)
2. Grommet finish:N = Not applicableD4 = B=Black, W=White(textured)S = 111, 114, 115, 117
3. Worksurface finish:L, V1, V2, V3
4. Edge finish:Complementary synthetic
5. Cone finish (36� & 42�):Painted/texturedPolished aluminum
6. Column finishPainted/texturedPolished aluminum
7. Foot finishPainted/texturedPolished aluminum
All Worksurfaces are 1 1/4� thick.
Edges:S = Square EdgeB = Thin beveled edge four sidesT = Thick beveled edge four sides
*Foot:X = GlideXC = Caster
Height (to top of worksurface):1 = 12�H2 = 15�H3 = 18�H
Application Notes
The following upcharges apply:Beveled Edge (B4 & T4): $500Casters: $30Grommets D4: $80Polished finish: $100 (Cone,Column, Foot or all)
All electrical accessories arespecified separately.
Refer to Accessories section forelectrical component pricing.
Islands Collection by Knoll®
31
X-Base Tables - Occasional Heights12�, 15� and 18� HighSoft Pentagon
description d w h pattern no. L V1 V2 V3
Soft Pentagon Table12� High
30� 12� ILTSP(S/B/T)X301( )( )( )( )( )( ) $998. $1,161. $1,205. $1,387.36� 12� ILTSP(S/B/T)X361( )( )( )( )( )( ) 1,024. 1,197. 1,252. 1,448.42� 12� ILTSP(S/B/T)X421( )( )( )( )( )( ) 1,056. 1,239. 1,308. 1,520.
*Available with Glides only.
Soft Pentagon Table15� High
30� 15� ILTSP(S/B/T)X302( )( )( )( )( )( ) 998. 1,161. 1,205. 1,387.36� 15� ILTSP(S/B/T)X362( )( )( )( )( )( ) 1,024. 1,197. 1,252. 1,448.42� 15� ILTSP(S/B/T)X422( )( )( )( )( )( ) 1,056. 1,239. 1,308. 1,520.
*Available with Glides only.
Soft Pentagon Table18� High
30� 18� ILTSP(S/B/T)(X/XC)303( )( )( )( )( )( ) 998. 1,161. 1,205. 1,387.36� 18� ILTSP(S/B/T)(X/XC)363( )( )( )( )( )( ) 1,024. 1,197. 1,252. 1,448.42� 18� ILTSP(S/B/T)(X/XC)423( )( )( )( )( )( ) 1,056. 1,239. 1,308. 1,520.
*Available with Glides and Casters.
Order Code
Example: ILTSPSX301
IL Islands Collection byKnoll�
T TableSP Soft PentagonS Edge (S/B/T)X Foot (X/XC)30 Size1 Height (1/2/3)N Grommet option( ) Grommet finish(114) Worksurface finish(SYN) Edge finish(114) Cone finish(114) Foot finish
Specification Information
To order please specify patternnumber including:1. Grommet option:
N = None (no grommet)D4 = Narrow slot 4�W (36�, 42�)S = Power square (36�, 42�)
2. Grommet finish:N = Not applicableD4 = B=Black, W=White(textured)S = 111, 114, 115, 117
3. Worksurface finish:L, V1, V2, V3
4. Edge finish:Complementary synthetic
5. Cone finish (36� & 42�):Painted/texturedPolished aluminum
6. Column finishPainted/texturedPolished aluminum
7. Foot finishPainted/texturedPolished aluminum
All Worksurfaces are 1 1/4� thick.
Edges:S = Square EdgeB = Thin beveled edge four sidesT = Thick beveled edge four sides
*Foot:X = GlideXC = Caster
Height (to top of worksurface):1 = 12�H2 = 15�H3 = 18�H
Application Notes
The following upcharges apply:Beveled Edge (B4 & T4): $500Casters: $30Grommets D4: $80Polished finish: $100 (Cone,Column, Foot or all)
All electrical accessories arespecified separately.
Refer to Accessories section forelectrical component pricing.
Islands Collection by Knoll®
32
X-Base Tables - Occasional Heights12�, 15� and 18� HighOrganic Pentagon Type A
description d w h pattern no. L V1 V2 V3
Organic Pentagon TableType A, 12� High
30� 30� 12� ILTOPA(S/B/T)X301( )( )( )( )( )( )( ) $998. $1,161. $1,205. $1,387.36� 36� 12� ILTOPA(S/B/T)X361( )( )( )( )( )( )( ) 1,024. 1,197. 1,252. 1,448.42� 42� 12� ILTOPA(S/B/T)X421( )( )( )( )( )( )( ) 1,056. 1,239. 1,308. 1,520.
*Available with Glides only.
Organic Pentagon TableType A, 15� High
30� 30� 15� ILTOPA(S/B/T)X302( )( )( )( )( )( )( ) 998. 1,161. 1,205. 1,387.36� 36� 15� ILTOPA(S/B/T)X362( )( )( )( )( )( )( ) 1,024. 1,197. 1,252. 1,448.42� 42� 15� ILTOPA(S/B/T)X422( )( )( )( )( )( )( ) 1,056. 1,239. 1,308. 1,520.
*Available with Glides only.
Organic Pentagon TableType A, 18� High
30� 30� 18� ILTOPA(S/B/T)(X/XC)303( )( )( )( )( )( )( ) 998. 1,161. 1,205. 1,387.36� 36� 18� ILTOPA(S/B/T)(X/XC)363( )( )( )( )( )( )( ) 1,024. 1,197. 1,252. 1,448.42� 42� 18� ILTOPA(S/B/T)(X/XC)423( )( )( )( )( )( )( ) 1,056. 1,239. 1,308. 1,520.
*Available with Glides and Casters.
Order Code
Example: ILTOPASX301
IL Islands Collection byKnoll�
T TableOPA Organic Pentagon Type
AS Edge (S/B/T)X Foot (X/XC)30 Size1 Height (1/2/3)N Grommet option( ) Grommet finish(114) Worksurface finish(SYN) Edge finish(114) Cone finish(114) Foot finish
Specification Information
To order please specify patternnumber including:1. Grommet option:
N = None (no grommet)D4 = Narrow slot 4�W (36�, 42�)S = Power square (36�, 42�)
2. Grommet finish:N = Not applicableD4 = B=Black, W=White(textured)S = 111, 114, 115, 117
3. Worksurface finish:L, V1, V2, V3
4. Edge finish:Complementary synthetic
5. Cone finish (36� & 42�):Painted/texturedPolished aluminum
6. Column finishPainted/texturedPolished aluminum
7. Foot finishPainted/texturedPolished aluminum
All Worksurfaces are 1 1/4� thick.
Edges:S = Square EdgeB = Thin beveled edge four sidesT = Thick beveled edge four sides
*Foot:X = GlideXC = Caster
Height (to top of worksurface):1 = 12�H2 = 15�H3 = 18�H
Application Notes
The following upcharges apply:Beveled Edge (B4 & T4): $500Casters: $30Grommets D4: $80Polished finish: $100 (Cone,Column, Foot or all)
All electrical accessories arespecified separately.
Refer to Accessories section forelectrical component pricing.
Islands Collection by Knoll®
33
X-Base Tables - Occasional Heights12�, 15� and 18� HighOrganic Pentagon Type B
description d w h pattern no. L V1 V2 V3
Organic Pentagon TableType B, 12� High
30� 30� 12� ILTOPB(S/B/T)X301( )( )( )( )( )( )( ) $998. $1,161. $1,205. $1,387.36� 36� 12� ILTOPB(S/B/T)X361( )( )( )( )( )( )( ) 1,024. 1,197. 1,252. 1,448.42� 42� 12� ILTOPB(S/B/T)X421( )( )( )( )( )( )( ) 1,056. 1,239. 1,308. 1,520.
*Available with Glides only.
Organic Pentagon TableType B, 15� High
30� 30� 15� ILTOPB(S/B/T)X302( )( )( )( )( )( )( ) 998. 1,161. 1,205. 1,387.36� 36� 15� ILTOPB(S/B/T)X362( )( )( )( )( )( )( ) 1,024. 1,197. 1,252. 1,448.42� 42� 15� ILTOPB(S/B/T)X422( )( )( )( )( )( )( ) 1,056. 1,239. 1,308. 1,520.
*Available with Glides only.
Organic Pentagon TableType B, 18� High
30� 30� 18� ILTOPB(S/B/T)(X/XC)303( )( )( )( )( )( )( ) 998. 1,161. 1,205. 1,387.36� 36� 18� ILTOPB(S/B/T)(X/XC)363( )( )( )( )( )( )( ) 1,024. 1,197. 1,252. 1,448.42� 42� 18� ILTOPB(S/B/T)(X/XC)423( )( )( )( )( )( )( ) 1,056. 1,239. 1,308. 1,520.
*Available with Glides and Casters.
Order Code
Example: ILTOPBSX301
IL Islands Collection byKnoll�
T TableOPB Organic Pentagon Type
BS Edge (S/B/T)X Foot (X/XC)30 Size1 Height (1/2/3)N Grommet option( ) Grommet finish(114) Worksurface finish(SYN) Edge finish(114) Cone finish(114) Foot finish
Specification Information
To order please specify patternnumber including:1. Grommet option:
N = None (no grommet)D4 = Narrow slot 4�W (36�, 42�)S = Power square (36�, 42�)
2. Grommet finish:N = Not applicableD4 = B=Black, W=White(textured)S = 111, 114, 115, 117
3. Worksurface finish:L, V1, V2, V3
4. Edge finish:Complementary synthetic
5. Cone finish (36� & 42�):Painted/texturedPolished aluminum
6. Column finishPainted/texturedPolished aluminum
7. Foot finishPainted/texturedPolished aluminum
All Worksurfaces are 1 1/4� thick.
Edges:S = Square EdgeB = Thin beveled edge four sidesT = Thick beveled edge four sides
*Foot:X = GlideXC = Caster
Height (to top of worksurface):1 = 12�H2 = 15�H3 = 18�H
Application Notes
The following upcharges apply:Beveled Edge (B4 & T4): $500Casters: $30Grommets D4: $80Polished finish: $100 (Cone,Column, Foot or all)
All electrical accessories arespecified separately.
Refer to Accessories section forelectrical component pricing.
Islands Collection by Knoll®
34
X-Base Tables - Desk Height29� HighRound Tables
description d w h pattern no. L V1 V2 V3
Round Table29� High
30� 30� 29� ILTRD(S/B/T)(X/XC)304( )( )( )( )( )( )( ) $979. $1,146. $1,190. $1,360.36� 36� 29� ILTRD(S/B/T)(X/XC)364( )( )( )( )( )( )( ) 1,007. 1,182. 1,238. 1,422.42� 42� 29� ILTRD(S/B/T)(X/XC)424( )( )( )( )( )( )( ) 1,039. 1,225. 1,294. 1,495.
*Available with Glides and Casters.
Order Code
Example: ILTRDSX304
IL Islands Collection byKnoll�
T TableRD RoundS Edge (S/B/T)X Foot (X/XC)30 Width4 29� HighN Grommet option( ) Grommet finish(114) Worksurface finish(SYN) Edge finish(114) Cone finish(114) Column finish(114) Foot finish
Specification Information
To order please specify patternnumber including:1. Grommet option:
N = None (no grommet)D4 = Narrow slot 4�W (36�, 42�)S = Power square (36�, 42�)
2. Grommet finish:N = Not applicableD4 = B=Black, W=White(textured)S = 111, 114, 115, 117
3. Worksurface finish:L, V1, V2, V3
4. Edge finish:Complementary synthetic
5. Cone finish:Painted/texturedPolished aluminum
6. Column finish:Painted/texturedPolished aluminum
7. Foot finishPainted/texturedPolished aluminum
All Worksurfaces are 1 1/4� thick .
Edges:S = Square EdgeB = Thin beveled edge four sidesT = Thick beveled edge four sides
*Foot:X = GlideXC = Caster
Height 29� is to top of worksurface.
Application Notes
The following upcharges apply:Beveled Edge (B4 & T4): $500Casters: $30Grommets D4: $80Polished finish: $100 (Cone,Column, Foot or all)
All electrical accessories arespecified separately.
Refer to Accessories section forelectrical component pricing.
Islands Collection by Knoll®
35
X-Base Tables - Desk Height29� HighSquare, Soft Square and Square with Curved Corners Tables
description d w h pattern no. L V1 V2 V3
Square Table29� High
30� 29� ILTSQ(S/B/T)(X/XC)304( )( )( )( )( )( ) $834. $949. $993. $1,103.36� 29� ILTSQ(S/B/T)(X/XC)364( )( )( )( )( )( ) 862. 985. 1,041. 1,166.42� 29� ILTSQ(S/B/T)(X/XC)424( )( )( )( )( )( ) 894. 1,029. 1,099. 1,241.
*Available with Glides and Casters.
Soft Square Table29� High
30� 29� ILTSS(S/B/T)(X/XC)304( )( )( )( )( )( ) 834. 949. 993. 1,103.36� 29� ILTSS(S/B/T)(X/XC)364( )( )( )( )( )( ) 862. 985. 1,041. 1,166.42� 29� ILTSS(S/B/T)(X/XC)424( )( )( )( )( )( ) 894. 1,029. 1,099. 1,241.
*Available with Glides and Casters.
Square Table, 29� HighCurved Corners
30� 29� ILTSC(S/B/T)(X/XC)304( )( )( )( )( )( ) 834. 949. 993. 1,103.36� 29� ILTSC(S/B/T)(X/XC)364( )( )( )( )( )( ) 862. 985. 1,041. 1,166.42� 29� ILTSC(S/B/T)(X/XC)424( )( )( )( )( )( ) 894. 1,029. 1,099. 1,241.
*Available with Glides and Casters.
Order Code
Example: ILTSQSX304
IL Islands Collection byKnoll�
T TableSQ Square
SS=Soft SquareS Edge (S/B/T)X Foot (X/XC)30 Width / Depth4 29� HighN Grommet option( ) Grommet finish(114) Worksurface finish(SYN) Edge finish(114) Cone finish(114) Column finish(114) Foot finish
Specification Information
To order please specify patternnumber including:1. Grommet option:
N = None (no grommet)D4 = Narrow slot 4�W (36�, 42�)S = Power square (36�, 42�)
2. Grommet finish:N = Not applicableD4 = B=Black, W=White(textured)S = 111, 114, 115, 117
3. Worksurface finish:L, V1, V2, V3
4. Edge finish:Complementary synthetic
5. Cone finish:Painted/texturedPolished aluminum
6. Column finish:Painted/texturedPolished aluminum
7. Foot finishPainted/texturedPolished aluminum
All Worksurfaces are 1 1/4� thick .
Edges:S = Square EdgeB = Thin beveled edge four sidesT = Thick beveled edge four sides
*Foot:X = GlideXC = Caster
Height 29� is to top of worksurface.
Application Notes
The following upcharges apply:Beveled Edge (B4 & T4): $650 forSquare TableBeveled Edge (B4 & T4): $500 forSoft Square TableCasters: $30Grommets D4: $80Polished finish: $100 (Cone,Column, Foot or all)
All electrical accessories arespecified separately.
Refer to Accessories section forelectrical component pricing.
Islands Collection by Knoll®
36
X-Base Tables - Desk Height29� HighSoft Pentagon, Organic Pentagon Type A and B
description d w h pattern no. L V1 V2 V3
Soft Pentagon Table29� High
30� 29� ILTSP(S/B/T)(X/XC)304( )( )( )( )( )( ) $1,023. $1,186. $1,230. $1,412.36� 29� ILTSP(S/B/T)(X/XC)364( )( )( )( )( )( ) 1,049. 1,222. 1,277. 1,473.42� 29� ILTSP(S/B/T)(X/XC)424( )( )( )( )( )( ) 1,081. 1,264. 1,333. 1,545.
*Available with Glides and Casters.
Organic Pentagon TableType A, 29� High
30� 29� ILTOPA(S/B/T)(X/XC)304( )( )( )( )( )( ) 1,023. 1,186. 1,230. 1,412.36� 29� ILTOPA(S/B/T)(X/XC)364( )( )( )( )( )( ) 1,049. 1,222. 1,277. 1,473.42� 29� ILTOPA(S/B/T)(X/XC)424( )( )( )( )( )( ) 1,081. 1,264. 1,333. 1,545.
*Available with Glides and Casters.
Organic Pentagon TableType B, 29� High
30� 29� ILTOPB(S/B/T)(X/XC)304( )( )( )( )( )( ) 1,023. 1,186. 1,230. 1,412.36� 29� ILTOPB(S/B/T)(X/XC)364( )( )( )( )( )( ) 1,049. 1,222. 1,277. 1,473.42� 29� ILTOPB(S/B/T)(X/XC)424( )( )( )( )( )( ) 1,081. 1,264. 1,333. 1,545.
*Available with Glides and Casters.
Order Code
Example: ILTSPSX304
IL Islands Collection byKnoll�
T TableSP Soft Pentagon
OPA=Organic PentagonType AOPB=Organic PentagonType B
S Edge (S/B/T)X Foot (X/XC)30 Width4 29� HighN Grommet option( ) Grommet finish(114) Worksurface finish(SYN) Edge finish(114) Cone finish(114) Column finish(114) Foot finish
Specification Information
To order please specify patternnumber including:1. Grommet option:
N = None (no grommet)D4 = Narrow slot 4�W (36�, 42�)S = Power square (36�, 42�)
2. Grommet finish:N = Not applicableD4 = B=Black, W=White(textured)S = 111, 114, 115, 117
3. Worksurface finish:L, V1, V2, V3
4. Edge finish:Complementary synthetic
5. Cone finish:Painted/texturedPolished aluminum
6. Column finish:Painted/texturedPolished aluminum
7. Foot finishPainted/texturedPolished aluminum
All Worksurfaces are 1 1/4� thick .
Edges:S = Square EdgeB = Thin beveled edge four sidesT = Thick beveled edge four sides
*Foot:X = GlideXC = Caster
Height 29� is to top of worksurface.
Application Notes
The following upcharges apply:Beveled Edge (B4 & T4): $500Casters: $30Grommets D4: $80Polished finish: $100 (Cone,Column, Foot or all)
All electrical accessories arespecified separately.
Refer to Accessories section forelectrical component pricing.
Islands Collection by Knoll®
37
X-Base Tables - Standing Height36� and 42� HighRound Tables
description d w h pattern no. L V1 V2 V3
Round Table36� High
30� 30� 36� ILTRD(S/B/T)X305( )( )( )( )( )( )( ) $1,004. $1,171. $1,215. $1,385.36� 36� 36� ILTRD(S/B/T)X365( )( )( )( )( )( )( ) 1,032. 1,207. 1,263. 1,447.42� 42� 36� ILTRD(S/B/T)X425( )( )( )( )( )( )( ) 1,064. 1,250. 1,319. 1,520.
*Available with Glides only.
Round Table42� High
30� 30� 42� ILTRD(S/B/T)X306( )( )( )( )( )( )( ) 1,004. 1,171. 1,215. 1,385.36� 36� 42� ILTRD(S/B/T)X366( )( )( )( )( )( )( ) 1,032. 1,207. 1,263. 1,447.42� 42� 42� ILTRD(S/B/T)X426( )( )( )( )( )( )( ) 1,064. 1,250. 1,319. 1,520.
*Available with Glides only.
Order Code
Example: ILTRDSX305
IL Islands Collection byKnoll�
T TableRD RoundS Edge (S/B/T)X Foot (X/XC)30 Width5 36� High, 6=42� HighN Grommet option( ) Grommet finish(114) Worksurface finish(SYN) Edge finish(114) Cone finish(114) Column finish(114) Foot finish
Specification Information
To order please specify patternnumber including:1. Grommet option:
N = None (no grommet)D4 = Narrow slot 4�W (36�, 42�)S = Power square (36�, 42�)
2. Grommet finish:N = Not applicableD4 = B=Black, W=White(textured)S = 111, 114, 115, 117
3. Worksurface finish:L, V1, V2, V3
4. Edge finish:Complementary synthetic
5. Cone finish:Painted/texturedPolished aluminum
6. Column finish:Painted/texturedPolished aluminum
7. Foot finishPainted/texturedPolished aluminum
All Worksurfaces are 1 1/4� thick .
Edges:S = Square EdgeB = Thin beveled edge four sidesT = Thick beveled edge four sides
*Foot:X = Glide
Height 36� and 42� is to top ofworksurface.
Application Notes
The following upcharges apply:Beveled Edge (B4 & T4): $500Casters: $30Grommets D4: $80Polished finish: $100 (Cone,Column, Foot or all)
All electrical accessories arespecified separately.
Refer to Accessories section forelectrical component pricing.
Islands Collection by Knoll®
38
X-Base Tables - Standing Height36� and 42� HighSquare and Soft Square Tables
description d w h pattern no. L V1 V2 V3
Square Table36� High
30� 36� ILTSQ(S/B/T)X305( )( )( )( )( )( )( ) $859. $974. $1,018. $1,128.36� 36� ILTSQ(S/B/T)X365( )( )( )( )( )( )( ) 887. 1,010. 1,066. 1,191.42� 36� ILTSQ(S/B/T)X425( )( )( )( )( )( )( ) 919. 1,054. 1,124. 1,266.
*Available with Glides only.
Square Table42� High
30� 42� ILTSQ(S/B/T)X306( )( )( )( )( )( )( ) 859. 974. 1,018. 1,128.36� 42� ILTSQ(S/B/T)X366( )( )( )( )( )( )( ) 887. 1,010. 1,066. 1,191.42� 42� ILTSQ(S/B/T)X426( )( )( )( )( )( )( ) 919. 1,054. 1,124. 1,266.
*Available with Glides only.
Soft Square Table36� High
30� 36� ILTSS(S/B/T)X305( )( )( )( )( )( )( ) 859. 974. 1,018. 1,128.36� 36� ILTSS(S/B/T)X365( )( )( )( )( )( )( ) 887. 1,010. 1,066. 1,191.42� 36� ILTSS(S/B/T)X425( )( )( )( )( )( )( ) 919. 1,054. 1,124. 1,266.
*Available with Glides only.
Soft Square Table42� High
30� 42� ILTSS(S/B/T)X306( )( )( )( )( )( )( ) 859. 974. 1,018. 1,128.36� 42� ILTSS(S/B/T)X366( )( )( )( )( )( )( ) 887. 1,010. 1,066. 1,191.42� 42� ILTSS(S/B/T)X426( )( )( )( )( )( )( ) 919. 1,054. 1,124. 1,266.
*Available with Glides only.
Order Code
Example: ILTSQSX305
IL Islands Collection byKnoll�
T TableSQ Square
SS=Soft SquareS Edge (S/B/T)X Foot30 Width / Depth5 36� High, 6=42� HighN Grommet option( ) Grommet finish(114) Worksurface finish(SYN) Edge finish(114) Cone finish(114) Column finish(114) Foot finish
Specification Information
To order please specify patternnumber including:1. Grommet option:
N = None (no grommet)D4 = Narrow slot 4�W (36�, 42�)S = Power square (36�, 42�)
2. Grommet finish:N = Not applicableD4 = B=Black, W=White(textured)S = 111, 114, 115, 117
3. Worksurface finish:L, V1, V2, V3
4. Edge finish:Complementary synthetic
5. Cone finish:Painted/texturedPolished aluminum
6. Column finish:Painted/texturedPolished aluminum
7. Foot finishPainted/texturedPolished aluminum
All Worksurfaces are 1 1/4� thick .
Edges:S = Square EdgeB = Thin beveled edge four sidesT = Thick beveled edge four sides
*Foot:X= Glide
Height 36� and 42� is to top ofworksurface.
Application Notes
The following upcharges apply:Beveled Edge (B4 & T4): $650 forSquare TableBeveled Edge (B4 & T4): $500 forSoft Square TableCasters: $30Grommets D4: $80Polished finish: $100 (Cone,Column, Foot or all)
All electrical accessories arespecified separately.
Refer to Accessories section forelectrical component pricing.
Islands Collection by Knoll®
39
X-Base Tables - Standing Height36� and 42� HighSquare Tables with Curved Corners
description d w h pattern no. L V1 V2 V3
Square Table, 36� HighCurved Corners
30� 36� ILTSC(S/B/T)X305( )( )( )( )( )( )( ) $859. $974. $1,018. $1,128.36� 36� ILTSC(S/B/T)X365( )( )( )( )( )( )( ) 887. 1,010. 1,066. 1,191.42� 36� ILTSC(S/B/T)X425( )( )( )( )( )( )( ) 919. 1,054. 1,124. 1,266.
*Available with Glides only.
Square Table, 42� HighCurved Corners
30� 42� ILTSC(S/B/T)X306( )( )( )( )( )( )( ) 859. 974. 1,018. 1,128.36� 42� ILTSC(S/B/T)X366( )( )( )( )( )( )( ) 887. 1,010. 1,066. 1,191.42� 42� ILTSC(S/B/T)X426( )( )( )( )( )( )( ) 919. 1,054. 1,124. 1,266.
*Available with Glides only.
Order Code
Example: ILTSCSX305
IL Islands Collection byKnoll�
T TableSC Square with curved
cornersS Edge (S/B/T)X Foot30 Width / Depth5 36� High, 6=42� HighN Grommet option( ) Grommet finish(114) Worksurface finish(SYN) Edge finish(114) Cone finish(114) Column finish(114) Foot finish
Specification Information
To order please specify patternnumber including:1. Grommet option:
N = None (no grommet)D4 = Narrow slot 4�W (36�, 42�)S = Power square (36�, 42�)
2. Grommet finish:N = Not applicableD4 = B=Black, W=White(textured)S = 111, 114, 115, 117
3. Worksurface finish:L, V1, V2, V3
4. Edge finish:Complementary synthetic
5. Cone finish:Painted/texturedPolished aluminum
6. Column finish:Painted/texturedPolished aluminum
7. Foot finishPainted/texturedPolished aluminum
All Worksurfaces are 1 1/4� thick .
Edges:S = Square EdgeB = Thin beveled edge four sidesT = Thick beveled edge four sides
*Foot:X= Glide
Height 36� and 42� is to top ofworksurface.
Application Notes
The following upcharges apply:Beveled Edge (B4 & T4): $650 forSquare TableBeveled Edge (B4 & T4): $500 forSoft Square TableCasters: $30Grommets D4: $80Polished finish: $100 (Cone,Column, Foot or all)
All electrical accessories arespecified separately.
Refer to Accessories section forelectrical component pricing.
Islands Collection by Knoll®
40
X-Base Tables - Standing Height36� and 42� HighSoft Pentagon
description d w h pattern no. L V1 V2 V3
Soft Pentagon Table36� High
30� 36� ILTSP(S/B/T)X305( )( )( )( )( )( ) $1,048. $1,211. $1,255. $1,437.36� 36� ILTSP(S/B/T)X365( )( )( )( )( )( ) 1,074. 1,247. 1,302. 1,498.42� 36� ILTSP(S/B/T)X425( )( )( )( )( )( ) 1,106. 1,289. 1,358. 1,570.
*Available with Glides only.
Soft Pentagon Table42� High
30� 42� ILTSP(S/B/T)X306( )( )( )( )( )( ) 1,048. 1,211. 1,255. 1,437.36� 42� ILTSP(S/B/T)X366( )( )( )( )( )( ) 1,074. 1,247. 1,302. 1,498.42� 42� ILTSP(S/B/T)X426( )( )( )( )( )( ) 1,106. 1,289. 1,358. 1,570.
*Available with Glides only.
Order Code
Example: ILTSPSX305
IL Islands Collection byKnoll�
T TableSP Soft PentagonS Edge (S/B/T)X Foot30 Width5 36� High, 6=42� HighN Grommet option( ) Grommet finish(114) Worksurface finish(SYN) Edge finish(114) Cone finish(114) Column finish(114) Foot finish
Specification Information
To order please specify patternnumber including:1. Grommet option:
N = None (no grommet)D4 = Narrow slot 4�W (36�, 42�)S = Power square (36�, 42�)
2. Grommet finish:N = Not applicableD4 = B=Black, W=White(textured)S = 111, 114, 115, 117
3. Worksurface finish:L, V1, V2, V3
4. Edge finish:Complementary synthetic
5. Cone finish:Painted/texturedPolished aluminum
6. Column finish:Painted/texturedPolished aluminum
7. Foot finishPainted/texturedPolished aluminum
All Worksurfaces are 1 1/4� thick .
Edges:S = Square EdgeB = Thin beveled edge four sidesT = Thick beveled edge four sides
*Foot:X = Glide
Height 36� and 42� is to top ofworksurface.
Application Notes
The following upcharges apply:Beveled Edge (B4 & T4): $500Casters: $30Grommets D4: $80Polished finish: $100 (Cone,Column, Foot or all)
All electrical accessories arespecified separately.
Refer to Accessories section forelectrical component pricing.
Islands Collection by Knoll®
41
X-Base Tables - Standing Height36� and 42� HighOrganic Pentagon Type A and B
description d w h pattern no. L V1 V2 V3
Organic Pentagon TableType A, 36� High
30� 36� ILTOPA(S/B/T)X305( )( )( )( )( )( ) $1,048. $1,211. $1,255. $1,437.36� 36� ILTOPA(S/B/T)X365( )( )( )( )( )( ) 1,074. 1,247. 1,302. 1,498.42� 36� ILTOPA(S/B/T)X425( )( )( )( )( )( ) 1,106. 1,289. 1,358. 1,570.
*Available with Glides only.
Organic Pentagon TableType A, 42� High
30� 42� ILTOPA(S/B/T)X306( )( )( )( )( )( ) 1,048. 1,211. 1,255. 1,437.36� 42� ILTOPA(S/B/T)X366( )( )( )( )( )( ) 1,074. 1,247. 1,302. 1,498.42� 42� ILTOPA(S/B/T)X426( )( )( )( )( )( ) 1,106. 1,289. 1,358. 1,570.
*Available with Glides only.
Organic Pentagon TableType B, 36� High
30� 36� ILTOPB(S/B/T)X305( )( )( )( )( )( )( ) 1,048. 1,211. 1,255. 1,437.36� 36� ILTOPB(S/B/T)X365( )( )( )( )( )( )( ) 1,074. 1,247. 1,302. 1,498.42� 36� ILTOPB(S/B/T)X425( )( )( )( )( )( )( ) 1,106. 1,289. 1,358. 1,570.
*Available with Glides only.
Organic Pentagon TableType B, 42� High
30� 42� ILTOPB(S/B/T)X306( )( )( )( )( )( )( ) 1,048. 1,211. 1,255. 1,437.36� 42� ILTOPB(S/B/T)X366( )( )( )( )( )( )( ) 1,074. 1,247. 1,302. 1,498.42� 42� ILTOPB(S/B/T)X426( )( )( )( )( )( )( ) 1,106. 1,289. 1,358. 1,570.
*Available with Glides only.
Order Code
Example: ILTOPASX305
IL Islands Collection byKnoll�
T TableOPA Organic Pentagon Type
AOPB=Organic PentagonType B
S Edge (S/B/T)X Foot30 Width5 36� High, 6=42� HighN Grommet option( ) Grommet finish(114) Worksurface finish(SYN) Edge finish(114) Cone finish(114) Column finish(114) Foot finish
Specification Information
To order please specify patternnumber including:1. Grommet option:
N = None (no grommet)D4 = Narrow slot 4�W (36�, 42�)S = Power square (36�, 42�)
2. Grommet finish:N = Not applicableD4 = B=Black, W=White(textured)S = 111, 114, 115, 117
3. Worksurface finish:L, V1, V2, V3
4. Edge finish:Complementary synthetic
5. Cone finish:Painted/texturedPolished aluminum
6. Column finish:Painted/texturedPolished aluminum
7. Foot finishPainted/texturedPolished aluminum
All Worksurfaces are 1 1/4� thick .
Edges:S = Square EdgeB = Thin beveled edge four sidesT = Thick beveled edge four sides
*Foot:X = Glide
Height 36� and 42� is to top ofworksurface.
Application Notes
The following upcharges apply:Beveled Edge (B4 & T4): $500Casters: $30Grommets D4: $80Polished finish: $100 (Cone,Column, Foot or all)
All electrical accessories arespecified separately.
Refer to Accessories section forelectrical component pricing.
Islands Collection by Knoll®
42
X-Base Tables - Conference29� High, Horizontal GrainRacetrack, Single-Piece Top
description d w h pattern no. L V1 V2 V3
Racetrack29� High
36� 72� 29� ILTRT(S/B/T)X72364H( )( )( )( )( )( )( )( ) $1,738. $1,892. $1,982. $2,202.78� 29� ILTRT(S/B/T)X78364H( )( )( )( )( )( )( )( ) 1,753. 1,912. 2,009. 2,237.84� 29� ILTRT(S/B/T)X84364H( )( )( )( )( )( )( )( ) 1,768. 1,932. 2,035. 2,271.90� 29� ILTRT(S/B/T)X90364H( )( )( )( )( )( )( )( ) 1,783. 1,952. 2,061. 2,304.96� 29� ILTRT(S/B/T)X96364H( )( )( )( )( )( )( )( ) 1,798. 1,972. 2,088. 2,339.108� 29� ILTRT(S/B/T)X108364H( )( )( )( )( )( )( )( ) 1,828. 2,012. 2,141. 2,408.
42� 78� 29� ILTRT(S/B/T)X78424H( )( )( )( )( )( )( )( ) 1,785. 1,955. 2,066. 2,311.84� 29� ILTRT(S/B/T)X84424H( )( )( )( )( )( )( )( ) 1,803. 1,979. 2,097. 2,351.90� 29� ILTRT(S/B/T)X90424H( )( )( )( )( )( )( )( ) 1,820. 2,002. 2,127. 2,390.96� 29� ILTRT(S/B/T)X96424H( )( )( )( )( )( )( )( ) 1,838. 2,025. 2,158. 2,430.108� 29� ILTRT(S/B/T)X108424H( )( )( )( )( )( )( )( ) 1,873. 2,072. 2,220. 2,511.
48� 90� 29� ILTRT(S/B/T)X90484H( )( )( )( )( )( )( )( ) 1,858. 2,052. 2,193. 2,476.96� 29� ILTRT(S/B/T)X96484H( )( )( )( )( )( )( )( ) 1,878. 2,079. 2,229. 2,523.108� 29� ILTRT(S/B/T)X108484H( )( )( )( )( )( )( )( ) 1,918. 2,132. 2,299. 2,614.
*Available with Glides only.
Order Code
Example: ILTRTSX72364H
IL Islands Collection byKnoll�
T TableRT RacetrackS Edge (S/B/T)X Foot72 Width36 Depth4 29� HighH Horizontal Grain
DirectionN Grommet option( ) Grommet finish(CC) Grommet location(114) Worksurface finish(SYN) Edge finish(114) Cone finish(114) Column finish(114) Foot finish
Specification Information
To order please specify patternnumber including:1. Grommet option:
N = None (no grommet)D4 = Narrow slot 4�WD8 = Narrow slot 8�WD12 = Narrow slot 12�WD18 = Narrow slot 18�WD24 = Narrow slot 24�WD36 = Narrow slot 36�WS = Power square*Refer to planning guide forgrommet options and locations.
2. Grommet finish:N = Not applicableD4 to D36 = B=Black, W=White(textured)S = 111, 114, 115, 117
3. Worksurface finish:L, V1, V2, V3
4. Edge finish:Complementary synthetic
5. Cone finish:Painted/texturedPolished aluminum
6. Column finish:Painted/texturedPolished aluminum
7. Foot finishPainted/texturedPolished aluminum
All Worksurfaces are 1 1/4� thick .
Edges:S = Square EdgeB = Thin beveled edge four sidesT = Thick beveled edge four sides
Grain Direction:H = HorizontalV = Vertical
*Foot:X = Glide
Height 29� is to top of worksurface.
Application Notes
The following upcharges apply:Beveled Edge (B4 & T4): $500Casters: $30Grommets D4, D8, D12, D18: $80eachGrommets D24, D36: $100 eachPolished finish: $200 (Cone,Column, Foot or all)
All electrical accessories arespecified separately.
Refer to Accessories section forelectrical component pricing.
Islands Collection by Knoll®
43
X-Base Tables - Conference29� High, Vertical GrainRacetrack, Multi-Piece Top
description d w h pattern no. L V1 V2 V3
Racetrack29� High
36� 120� 29� ILTRT(S/B/T)X120364V( )( )( )( )( )( )( )( ) $2,796. $3,403. $3,637. $4,166.132� 29� ILTRT(S/B/T)X132364V( )( )( )( )( )( )( )( ) 2,823. 3,430. 3,677. 4,217.144� 29� ILTRT(S/B/T)X144364V( )( )( )( )( )( )( )( ) 2,849. 3,457. 3,716. 4,268.156� 29� ILTRT(S/B/T)X156364V( )( )( )( )( )( )( )( ) 2,875. 3,484. 3,755. 4,319.
42� 120� 29� ILTRT(S/B/T)X120424V( )( )( )( )( )( )( )( ) 2,840. 3,448. 3,703. 4,251.132� 29� ILTRT(S/B/T)X132424V( )( )( )( )( )( )( )( ) 2,871. 3,480. 3,749. 4,311.144� 29� ILTRT(S/B/T)X144424V( )( )( )( )( )( )( )( ) 2,902. 3,511. 3,795. 4,371.156� 29� ILTRT(S/B/T)X156424V( )( )( )( )( )( )( )( ) 2,933. 3,542. 3,841. 4,430.
48� 120� 29� ILTRT(S/B/T)X120484V( )( )( )( )( )( )( )( ) 2,884. 3,493. 3,768. 4,336.132� 29� ILTRT(S/B/T)X132484V( )( )( )( )( )( )( )( ) 2,919. 3,528. 3,821. 4,405.144� 29� ILTRT(S/B/T)X144484V( )( )( )( )( )( )( )( ) 2,955. 3,564. 3,873. 4,472.156� 29� ILTRT(S/B/T)X156484V( )( )( )( )( )( )( )( ) 2,990. 3,600. 3,925. 4,540.
*Available with Glides only.
Order Code
Example: ILTRTSX120364V
IL Islands Collection byKnoll�
T TableRT RacetrackS Edge (S/B/T)X Foot120 Width36 Depth4 29� HighV Vertical Grain DirectionN Grommet option( ) Grommet finish(CC) Grommet location(114) Worksurface finish(SYN) Edge finish(114) Cone finish(114) Column finish(114) Foot finish
Specification Information
To order please specify patternnumber including:1. Grommet option:
N = None (no grommet)D4 = Narrow slot 4�WD8 = Narrow slot 8�WD12 = Narrow slot 12�WD18 = Narrow slot 18�WD24 = Narrow slot 24�WD36 = Narrow slot 36�WS = Power square*Refer to planning guide forgrommet options and locations.
2. Grommet finish:N = Not applicableD4 to D36 = B=Black, W=White(textured)S = 111, 114, 115, 117
3. Worksurface finish:L, V1, V2, V3
4. Edge finish:Complementary synthetic
5. Cone finish:Painted/texturedPolished aluminum
6. Column finish:Painted/texturedPolished aluminum
7. Foot finishPainted/texturedPolished aluminum
All Worksurfaces are 1 1/4� thick .
Edges:S = Square EdgeB = Thin beveled edge four sidesT = Thick beveled edge four sides
Grain Direction:H = HorizontalV = Vertical
*Foot:X = Glide
Height 29� is to top of worksurface.
Application Notes
The following upcharges apply:Beveled Edge (B4 & T4): $500Casters: $30Grommets D4, D8, D12, D18: $80eachGrommets D24, D36: $100 eachPolished finish: $300 (Cone,Column, Foot or all)
All electrical accessories arespecified separately.
Refer to Accessories section forelectrical component pricing.
Islands Collection by Knoll®
44
X-Base Tables - Conference29� High, Horizontal GrainRacetrack, Multi-Piece Top
description d w h pattern no. L V1 V2 V3
Racetrack29� High
36� 120� 29� ILTRT(S/B/T)X120364H( )( )( )( )( )( )( )( ) $2,898. $3,573. $3,833. $4,420.132� 29� ILTRT(S/B/T)X132364H( )( )( )( )( )( )( )( ) 2,928. 3,603. 3,877. 4,478.144� 29� ILTRT(S/B/T)X144364H( )( )( )( )( )( )( )( ) 2,957. 3,633. 3,920. 4,534.156� 29� ILTRT(S/B/T)X156364H( )( )( )( )( )( )( )( ) 2,986. 3,663. 3,964. 4,591.
42� 120� 29� ILTRT(S/B/T)X120424H( )( )( )( )( )( )( )( ) 2,947. 3,623. 3,906. 4,515.132� 29� ILTRT(S/B/T)X132424H( )( )( )( )( )( )( )( ) 2,982. 3,658. 3,957. 4,582.144� 29� ILTRT(S/B/T)X144424H( )( )( )( )( )( )( )( ) 3,016. 3,693. 4,008. 4,648.156� 29� ILTRT(S/B/T)X156424H( )( )( )( )( )( )( )( ) 3,050. 3,727. 4,059. 4,714.
48� 120� 29� ILTRT(S/B/T)X120484H( )( )( )( )( )( )( )( ) 2,996. 3,673. 3,978. 4,609.132� 29� ILTRT(S/B/T)X132484H( )( )( )( )( )( )( )( ) 3,035. 3,712. 1,037. 4,686.144� 29� ILTRT(S/B/T)X144484H( )( )( )( )( )( )( )( ) 3,075. 3,752. 4,095. 4,761.156� 29� ILTRT(S/B/T)X156484H( )( )( )( )( )( )( )( ) 3,114. 3,792. 4,153. 4,836.
*Available with Glides only.
Order Code
Example: ILTRTSX120364H
IL Islands Collection byKnoll�
T TableRT RacetrackS Edge (S/B/T)X Foot120 Width36 Depth4 29� HighH Horizontal Grain
DirectionN Grommet option( ) Grommet finish(CC) Grommet location(114) Worksurface finish(SYN) Edge finish(114) Cone finish(114) Column finish(114) Foot finish
Specification Information
To order please specify patternnumber including:1. Grommet option:
N = None (no grommet)D4 = Narrow slot 4�WD8 = Narrow slot 8�WD12 = Narrow slot 12�WD18 = Narrow slot 18�WD24 = Narrow slot 24�WD36 = Narrow slot 36�WS = Power square*Refer to planning guide forgrommet options and locations.
2. Grommet finish:N = Not applicableD4 to D36 = B=Black, W=White(textured)S = 111, 114, 115, 117
3. Worksurface finish:L, V1, V2, V3
4. Edge finish:Complementary synthetic
5. Cone finish:Painted/texturedPolished aluminum
6. Column finish:Painted/texturedPolished aluminum
7. Foot finishPainted/texturedPolished aluminum
All Worksurfaces are 1 1/4� thick .
Edges:S = Square EdgeB = Thin beveled edge four sidesT = Thick beveled edge four sides
Grain Direction:H = HorizontalV = Vertical
*Foot:X = Glide
Height 29� is to top of worksurface.
Application Notes
The following upcharges apply:Beveled Edge (B4 & T4): $500Casters: $30Grommets D4, D8, D12, D18: $80eachGrommets D24, D36: $100 eachPolished finish: $300 (Cone,Column, Foot or all)
All electrical accessories arespecified separately.
Refer to Accessories section forelectrical component pricing.
Islands Collection by Knoll®
45
X-Base Tables - Conference29� High, Horizontal GrainRectilinear, Single-Piece Top
description d w h pattern no. L V1 V2 V3
Rectilinear29� High
36� 72� 29� ILTRL(S/B/T)X72364H( )( )( )( )( )( )( )( ) $1,738. $1,892. $1,982. $2,202.78� 29� ILTRL(S/B/T)X78364H( )( )( )( )( )( )( )( ) 1,753. 1,912. 2,009. 2,237.84� 29� ILTRL(S/B/T)X84364H( )( )( )( )( )( )( )( ) 1,768. 1,932. 2,035. 2,271.90� 29� ILTRL(S/B/T)X90364H( )( )( )( )( )( )( )( ) 1,783. 1,952. 2,061. 2,304.96� 29� ILTRL(S/B/T)X96364H( )( )( )( )( )( )( )( ) 1,798. 1,972. 2,088. 2,339.108� 29� ILTRL(S/B/T)X108364H( )( )( )( )( )( )( )( ) 1,828. 2,012. 2,141. 2,408.
42� 78� 29� ILTRL(S/B/T)X78424H( )( )( )( )( )( )( )( ) 1,785. 1,955. 2,066. 2,311.84� 29� ILTRL(S/B/T)X84424H( )( )( )( )( )( )( )( ) 1,803. 1,979. 2,097. 2,351.90� 29� ILTRL(S/B/T)X90424H( )( )( )( )( )( )( )( ) 1,820. 2,002. 2,127. 2,390.96� 29� ILTRL(S/B/T)X96424H( )( )( )( )( )( )( )( ) 1,838. 2,025. 2,158. 2,430.108� 29� ILTRL(S/B/T)X108424H( )( )( )( )( )( )( )( ) 1,873. 2,072. 2,220. 2,511.
48� 90� 29� ILTRL(S/B/T)X90484H( )( )( )( )( )( )( )( ) 1,858. 2,052. 2,193. 2,476.96� 29� ILTRL(S/B/T)X96484H( )( )( )( )( )( )( )( ) 1,878. 2,079. 2,229. 2,523.108� 29� ILTRL(S/B/T)X108484H( )( )( )( )( )( )( )( ) 1,918. 2,132. 2,299. 2,614.
*Available with Glides only.
Order Code
Example: ILTRLSX72364H
IL Islands Collection byKnoll�
T TableRL RectilinearS Edge (S/B/T)X Foot72 Width36 Depth4 29� HighH Horizontal Grain
DirectionN Grommet option( ) Grommet finish(CC) Grommet location(114) Worksurface finish(SYN) Edge finish(114) Cone finish(114) Column finish(114) Foot finish
Specification Information
To order please specify patternnumber including:1. Grommet option:
N = None (no grommet)D4 = Narrow slot 4�WD8 = Narrow slot 8�WD12 = Narrow slot 12�WD18 = Narrow slot 18�WD24 = Narrow slot 24�WD36 = Narrow slot 36�WS = Power square*Refer to planning guide forgrommet options and locations.
2. Grommet finish:N = Not applicableD4 to D36 = B=Black, W=White(textured)S = 111, 114, 115, 117
3. Worksurface finish:L, V1, V2, V3
4. Edge finish:Complementary synthetic
5. Cone finish:Painted/texturedPolished aluminum
6. Column finish:Painted/texturedPolished aluminum
7. Foot finishPainted/texturedPolished aluminum
All Worksurfaces are 1 1/4� thick .
Edges:S = Square EdgeB = Thin beveled edge four sidesT = Thick beveled edge four sides
Grain Direction:H = HorizontalV = Vertical
*Foot:X = Glide
Height 29� is to top of worksurface.
Application Notes
The following upcharges apply:Beveled Edge (B4 & T4): $650Casters: $30Grommets D4, D8, D12, D18: $80eachGrommets D24, D36: $100 eachPolished finish: $200 (Cone,Column, Foot or all)
All electrical accessories arespecified separately.
Refer to Accessories section forelectrical component pricing.
Islands Collection by Knoll®
46
X-Base Tables - Conference29� High, Vertical GrainRectilinear, Multi-Piece Top
description d w h pattern no. L V1 V2 V3
Rectilinear29� High
36� 120� 29� ILTRL(S/B/T)X120364V( )( )( )( )( )( )( )( ) $2,467. $3,108. $3,339. $3,779.132� 29� ILTRL(S/B/T)X132364V( )( )( )( )( )( )( )( ) 2,494. 3,136. 3,380. 3,831.144� 29� ILTRL(S/B/T)X144364V( )( )( )( )( )( )( )( ) 2,520. 3,164. 3,419. 3,883.156� 29� ILTRL(S/B/T)X156364V( )( )( )( )( )( )( )( ) 2,546. 3,192. 3,459. 3,934.
42� 120� 29� ILTRL(S/B/T)X120424V( )( )( )( )( )( )( )( ) 2,511. 3,155. 3,406. 3,865.132� 29� ILTRL(S/B/T)X132424V( )( )( )( )( )( )( )( ) 2,542. 3,187. 3,453. 3,926.144� 29� ILTRL(S/B/T)X144424V( )( )( )( )( )( )( )( ) 2,573. 3,219. 3,499. 3,986.156� 29� ILTRL(S/B/T)X156424V( )( )( )( )( )( )( )( ) 2,604. 3,251. 3,545. 4,047.
48� 120� 29� ILTRL(S/B/T)X120484V( )( )( )( )( )( )( )( ) 2,555. 3,201. 3,473. 3,952.132� 29� ILTRL(S/B/T)X132484V( )( )( )( )( )( )( )( ) 2,591. 3,238. 3,526. 4,021.144� 29� ILTRL(S/B/T)X144484V( )( )( )( )( )( )( )( ) 2,626. 3,275. 3,579. 4,090.156� 29� ILTRL(S/B/T)X156484V( )( )( )( )( )( )( )( ) 2,661. 3,311. 3,632. 4,159.
*Available with Glides only.
Order Code
Example: ILTRLSX120364V
IL Islands Collection byKnoll�
T TableRL RectilinearS Edge (S/B/T)X Foot120 Width36 Depth4 29� HighV Vertical Grain DirectionN Grommet option( ) Grommet finish(CC) Grommet location(114) Worksurface finish(SYN) Edge finish(114) Cone finish(114) Column finish(114) Foot finish
Specification Information
To order please specify patternnumber including:1. Grommet option:
N = None (no grommet)D4 = Narrow slot 4�WD8 = Narrow slot 8�WD12 = Narrow slot 12�WD18 = Narrow slot 18�WD24 = Narrow slot 24�WD36 = Narrow slot 36�WS = Power square*Refer to planning guide forgrommet options and locations.
2. Grommet finish:N = Not applicableD4 to D36 = B=Black, W=White(textured)S = 111, 114, 115, 117
3. Worksurface finish:L, V1, V2, V3
4. Edge finish:Complementary synthetic
5. Cone finish:Painted/texturedPolished aluminum
6. Column finish:Painted/texturedPolished aluminum
7. Foot finishPainted/texturedPolished aluminum
All Worksurfaces are 1 1/4� thick .
Edges:S = Square EdgeB = Thin beveled edge four sidesT = Thick beveled edge four sides
Grain Direction:H = HorizontalV = Vertical
*Foot:X = Glide
Height 29� is to top of worksurface.
Application Notes
The following upcharges apply:Beveled Edge (B4 & T4): $650Casters: $30Grommets D4, D8, D12, D18: $80eachGrommets D24, D36: $100 eachPolished finish: $300 (Cone,Column, Foot or all)
All electrical accessories arespecified separately.
Refer to Accessories section forelectrical component pricing.
Islands Collection by Knoll®
47
X-Base Tables - Conference29� High, Horizontal GrainRectilinear, Multi-Piece Top
description d w h pattern no. L V1 V2 V3
Rectilinear29� High
36� 120� 29� ILTRL(S/B/T)X120364H( )( )( )( )( )( )( )( ) $2,533. $3,245. $3,502. $3,990.132� 29� ILTRL(S/B/T)X132364H( )( )( )( )( )( )( )( ) 2,563. 3,276. 3,547. 4,049.144� 29� ILTRL(S/B/T)X144364H( )( )( )( )( )( )( )( ) 2,592. 3,307. 3,591. 4,106.156� 29� ILTRL(S/B/T)X156364H( )( )( )( )( )( )( )( ) 2,621. 3,338. 3,635. 4,163.
42� 120� 29� ILTRL(S/B/T)X120424H( )( )( )( )( )( )( )( ) 2,582. 3,297. 3,576. 4,086.132� 29� ILTRL(S/B/T)X132424H( )( )( )( )( )( )( )( ) 2,616. 3,333. 3,628. 4,154.144� 29� ILTRL(S/B/T)X144424H( )( )( )( )( )( )( )( ) 2,651. 3,368. 3,679. 4,220.156� 29� ILTRL(S/B/T)X156424H( )( )( )( )( )( )( )( ) 2,685. 3,404. 3,731. 4,288.
48� 120� 29� ILTRL(S/B/T)X120484H( )( )( )( )( )( )( )( ) 2,631. 3,348. 3,650. 4,183.132� 29� ILTRL(S/B/T)X132484H( )( )( )( )( )( )( )( ) 2,670. 3,389. 3,709. 4,259.144� 29� ILTRL(S/B/T)X144484H( )( )( )( )( )( )( )( ) 2,709. 3,430. 3,768. 4,336.156� 29� ILTRL(S/B/T)X156484H( )( )( )( )( )( )( )( ) 2,748. 3,471. 3,827. 4,413.
*Available with Glides only.
Order Code
Example: ILTRLSX120364H
IL Islands Collection byKnoll�
T TableRL RectilinearS Edge (S/B/T)X Foot120 Width36 Depth4 29� HighH Horizontal Grain
DirectionN Grommet option( ) Grommet finish(CC) Grommet location(114) Worksurface finish(SYN) Edge finish(114) Cone finish(114) Column finish(114) Foot finish
Specification Information
To order please specify patternnumber including:1. Grommet option:
N = None (no grommet)D4 = Narrow slot 4�WD8 = Narrow slot 8�WD12 = Narrow slot 12�WD18 = Narrow slot 18�WD24 = Narrow slot 24�WD36 = Narrow slot 36�WS = Power square*Refer to planning guide forgrommet options and locations.
2. Grommet finish:N = Not applicableD4 to D36 = B=Black, W=White(textured)S = 111, 114, 115, 117
3. Worksurface finish:L, V1, V2, V3
4. Edge finish:Complementary synthetic
5. Cone finish:Painted/texturedPolished aluminum
6. Column finish:Painted/texturedPolished aluminum
7. Foot finishPainted/texturedPolished aluminum
All Worksurfaces are 1 1/4� thick .
Edges:S = Square EdgeB = Thin beveled edge four sidesT = Thick beveled edge four sides
Grain Direction:H = HorizontalV = Vertical
*Foot:X = Glide
Height 29� is to top of worksurface.
Application Notes
The following upcharges apply:Beveled Edge (B4 & T4): $650Casters: $30Grommets D4, D8, D12, D18: $80eachGrommets D24, D36: $100 eachPolished finish: $300 (Cone,Column, Foot or all)
All electrical accessories arespecified separately.
Refer to Accessories section forelectrical component pricing.
Islands Collection by Knoll®
48
X-Base Tables - Conference29� High, Horizontal GrainRectilinear with Curved Corners, Single-Piece Top
description d w h pattern no. L V1 V2 V3
Rectilinear with Curved Corners29� High
36� 72� 29� ILTRC(S/B/T)X72364H( )( )( )( )( )( )( )( ) $1,738. $1,892. $1,982. $2,202.78� 29� ILTRC(S/B/T)X78364H( )( )( )( )( )( )( )( ) 1,753. 1,912. 2,009. 2,237.84� 29� ILTRC(S/B/T)X84364H( )( )( )( )( )( )( )( ) 1,768. 1,932. 2,035. 2,271.90� 29� ILTRC(S/B/T)X90364H( )( )( )( )( )( )( )( ) 1,783. 1,952. 2,061. 2,304.96� 29� ILTRC(S/B/T)X96364H( )( )( )( )( )( )( )( ) 1,798. 1,972. 2,088. 2,339.108� 29� ILTRC(S/B/T)X108364H( )( )( )( )( )( )( )( ) 1,828. 2,012. 2,141. 2,408.
42� 78� 29� ILTRC(S/B/T)X78424H( )( )( )( )( )( )( )( ) 1,785. 1,955. 2,066. 2,311.84� 29� ILTRC(S/B/T)X84424H( )( )( )( )( )( )( )( ) 1,803. 1,979. 2,097. 2,351.90� 29� ILTRC(S/B/T)X90424H( )( )( )( )( )( )( )( ) 1,820. 2,002. 2,127. 2,390.96� 29� ILTRC(S/B/T)X96424H( )( )( )( )( )( )( )( ) 1,838. 2,025. 2,158. 2,430.108� 29� ILTRC(S/B/T)X108424H( )( )( )( )( )( )( )( ) 1,873. 2,072. 2,220. 2,511.
48� 90� 29� ILTRC(S/B/T)X90484H( )( )( )( )( )( )( )( ) 1,858. 2,052. 2,193. 2,476.96� 29� ILTRC(S/B/T)X96484H( )( )( )( )( )( )( )( ) 1,878. 2,079. 2,229. 2,523.108� 29� ILTRC(S/B/T)X108484H( )( )( )( )( )( )( )( ) 1,918. 2,132. 2,299. 2,614.
*Available with Glides only.
Order Code
Example: ILTRCSX72364H
IL Islands Collection byKnoll�
T TableRC Rectilinear with Curved
CornersS Edge (S/B/T)X Foot72 Width36 Depth4 29� HighH Horizontal Grain
DirectionN Grommet option( ) Grommet finish(CC) Grommet location(114) Worksurface finish(SYN) Edge finish(114) Cone finish(114) Column finish(114) Foot finish
Specification Information
To order please specify patternnumber including:1. Grommet option:
N = None (no grommet)D4 = Narrow slot 4�WD8 = Narrow slot 8�WD12 = Narrow slot 12�WD18 = Narrow slot 18�WD24 = Narrow slot 24�WD36 = Narrow slot 36�WS = Power square*Refer to planning guide forgrommet options and locations.
2. Grommet finish:N = Not applicableD4 to D36 = B=Black, W=White(textured)S = 111, 114, 115, 117
3. Worksurface finish:L, V1, V2, V3
4. Edge finish:Complementary synthetic
5. Cone finish:Painted/texturedPolished aluminum
6. Column finish:Painted/texturedPolished aluminum
7. Foot finishPainted/texturedPolished aluminum
All Worksurfaces are 1 1/4� thick .
Edges:S = Square EdgeB = Thin beveled edge four sidesT = Thick beveled edge four sides
Grain Direction:H = HorizontalV = Vertical
*Foot:X = Glide
Height 29� is to top of worksurface.
Application Notes
The following upcharges apply:Beveled Edge (B4 & T4): $500Casters: $30Grommets D4, D8, D12, D18: $80eachGrommets D24, D36: $100 eachPolished finish: $200 (Cone,Column, Foot or all)
All electrical accessories arespecified separately.
Refer to Accessories section forelectrical component pricing.
Islands Collection by Knoll®
49
X-Base Tables - Conference29� High, Vertical GrainRectilinear with Curved Corners, Multi-Piece Top
description d w h pattern no. L V1 V2 V3
Rectilinear with Curved Corners29� High
36� 120� 29� ILTRC(S/B/T)X120364V( )( )( )( )( )( )( )( ) $2,467. $3,108. $3,339. $3,779.132� 29� ILTRC(S/B/T)X132364V( )( )( )( )( )( )( )( ) 2,494. 3,136. 3,380. 3,831.144� 29� ILTRC(S/B/T)X144364V( )( )( )( )( )( )( )( ) 2,520. 3,164. 3,419. 3,883.156� 29� ILTRC(S/B/T)X156364V( )( )( )( )( )( )( )( ) 2,546. 3,192. 3,459. 3,934.
42� 120� 29� ILTRC(S/B/T)X120424V( )( )( )( )( )( )( )( ) 2,511. 3,155. 3,406. 3,865.132� 29� ILTRC(S/B/T)X132424V( )( )( )( )( )( )( )( ) 2,542. 3,187. 3,453. 3,926.144� 29� ILTRC(S/B/T)X144424V( )( )( )( )( )( )( )( ) 2,573. 3,219. 3,499. 3,986.156� 29� ILTRC(S/B/T)X156424V( )( )( )( )( )( )( )( ) 2,604. 3,251. 3,545. 4,047.
48� 120� 29� ILTRC(S/B/T)X120484V( )( )( )( )( )( )( )( ) 2,555. 3,201. 3,473.3132� 29� ILTRC(S/B/T)X132484V( )( )( )( )( )( )( )( ) 2,591. 3,238. 3,526. 4,021.144� 29� ILTRC(S/B/T)X144484V( )( )( )( )( )( )( )( ) 2,626. 3,275. 3,579. 4,090.156� 29� ILTRC(S/B/T)X156484V( )( )( )( )( )( )( )( ) 2,661. 3,311. 3,632. 4,159.
*Available with Glides only.
Order Code
Example: ILTRCSX120364V
IL Islands Collection byKnoll�
T TableRC Rectilinear with Curved
CornersS Edge (S/B/T)X Foot120 Width36 Depth4 29� HighV Vertical Grain DirectionN Grommet option( ) Grommet finish(CC) Grommet location(114) Worksurface finish(SYN) Edge finish(114) Cone finish(114) Column finish(114) Foot finish
Specification Information
To order please specify patternnumber including:1. Grommet option:
N = None (no grommet)D4 = Narrow slot 4�WD8 = Narrow slot 8�WD12 = Narrow slot 12�WD18 = Narrow slot 18�WD24 = Narrow slot 24�WD36 = Narrow slot 36�WS = Power square*Refer to planning guide forgrommet options and locations.
2. Grommet finish:N = Not applicableD4 to D36 = B=Black, W=White(textured)S = 111, 114, 115, 117
3. Worksurface finish:L, V1, V2, V3
4. Edge finish:Complementary synthetic
5. Cone finish:Painted/texturedPolished aluminum
6. Column finish:Painted/texturedPolished aluminum
7. Foot finishPainted/texturedPolished aluminum
All Worksurfaces are 1 1/4� thick .
Edges:S = Square EdgeB = Thin beveled edge four sidesT = Thick beveled edge four sides
Grain Direction:H = HorizontalV = Vertical
*Foot:X = Glide
Height 29� is to top of worksurface.
Application Notes
The following upcharges apply:Beveled Edge (B4 & T4): $500Casters: $30Grommets D4, D8, D12, D18: $80eachGrommets D24, D36: $100 eachPolished finish: $300 (Cone,Column, Foot or all)
All electrical accessories arespecified separately.
Refer to Accessories section forelectrical component pricing.
Islands Collection by Knoll®
50
X-Base Tables - Conference29� High, Horizontal GrainRectilinear with Curved Corners, Multi-Piece Top
description d w h pattern no. L V1 V2 V3
Rectilinear with Curved Corners29� High
36� 120� 29� ILTRC(S/B/T)X120364H( )( )( )( )( )( )( )( ) $2,898. $3,573. $3,833. $4,420.132� 29� ILTRC(S/B/T)X132364H( )( )( )( )( )( )( )( ) 2,928. 3,603. 3,877. 4,478.144� 29� ILTRC(S/B/T)X144364H( )( )( )( )( )( )( )( ) 2,957. 3,633. 3,920. 4,534.156� 29� ILTRC(S/B/T)X156364H( )( )( )( )( )( )( )( ) 2,986. 3,663. 3,964. 4,591.
42� 120� 29� ILTRC(S/B/T)X120424H( )( )( )( )( )( )( )( ) 2,947. 3,623. 3,906. 4,515.132� 29� ILTRC(S/B/T)X132424H( )( )( )( )( )( )( )( ) 2,982. 3,658. 3,957. 4,582.144� 29� ILTRC(S/B/T)X144424H( )( )( )( )( )( )( )( ) 3,016. 3,693. 4,008. 4,648.156� 29� ILTRC(S/B/T)X156424H( )( )( )( )( )( )( )( ) 3,050. 3,727. 4,059. 4,714.
48� 120� 29� ILTRC(S/B/T)X120484H( )( )( )( )( )( )( )( ) 2,996. 3,673. 3,978. 4,609.132� 29� ILTRC(S/B/T)X132484H( )( )( )( )( )( )( )( ) 3,035. 3,712. 4,037. 4,686.144� 29� ILTRC(S/B/T)X144484H( )( )( )( )( )( )( )( ) 3,075. 3,752. 4,095. 4,761.156� 29� ILTRC(S/B/T)X156484H( )( )( )( )( )( )( )( ) 3,114. 3,792. 4,153. 4,836.
*Available with Glides only.
Order Code
Example: ILTRCSX120364H
IL Islands Collection byKnoll�
T TableRC Rectilinear with Curved
CornersS Edge (S/B/T)X Foot120 Width36 Depth4 29� HighH Horizontal Grain
DirectionN Grommet option( ) Grommet finish(CC) Grommet location(114) Worksurface finish(SYN) Edge finish(114) Cone finish(114) Column finish(114) Foot finish
Specification Information
To order please specify patternnumber including:1. Grommet option:
N = None (no grommet)D4 = Narrow slot 4�WD8 = Narrow slot 8�WD12 = Narrow slot 12�WD18 = Narrow slot 18�WD24 = Narrow slot 24�WD36 = Narrow slot 36�WS = Power square*Refer to planning guide forgrommet options and locations.
2. Grommet finish:N = Not applicableD4 to D36 = B=Black, W=White(textured)S = 111, 114, 115, 117
3. Worksurface finish:L, V1, V2, V3
4. Edge finish:Complementary synthetic
5. Cone finish:Painted/texturedPolished aluminum
6. Column finish:Painted/texturedPolished aluminum
7. Foot finishPainted/texturedPolished aluminum
All Worksurfaces are 1 1/4� thick .
Edges:S = Square EdgeB = Thin beveled edge four sidesT = Thick beveled edge four sides
Grain Direction:H = HorizontalV = Vertical
*Foot:X = Glide
Height 29� is to top of worksurface.
Application Notes
The following upcharges apply:Beveled Edge (B4 & T4): $500Casters: $30Grommets D4, D8, D12, D18: $80eachGrommets D24, D36: $100 eachPolished finish: $300 (Cone,Column, Foot or all)
All electrical accessories arespecified separately.
Refer to Accessories section forelectrical component pricing.
Islands Collection by Knoll®
51
X-Base Tables - Conference29� High, Horizontal GrainRound Rectilinear, Single-Piece Top
description d w h pattern no. L V1 V2 V3
Round Rectilinear29� High
36� 72� 29� ILTRR(S/B/T)X72364H( )( )( )( )( )( )( )( ) $1,738. $1,892. $1,982. $2,202.78� 29� ILTRR(S/B/T)X78364H( )( )( )( )( )( )( )( ) 1,753. 1,912. 2,009. 2,237.84� 29� ILTRR(S/B/T)X84364H( )( )( )( )( )( )( )( ) 1,768. 1,932. 2,035. 2,271.90� 29� ILTRR(S/B/T)X90364H( )( )( )( )( )( )( )( ) 1,783. 1,952. 2,061. 2,304.96� 29� ILTRR(S/B/T)X96364H( )( )( )( )( )( )( )( ) 1,798. 1,972. 2,088. 2,339.108� 29� ILTRR(S/B/T)X108364H( )( )( )( )( )( )( )( ) 1,828. 2,012. 2,141. 2,408.
42� 78� 29� ILTRR(S/B/T)X78424H( )( )( )( )( )( )( )( ) 1,785. 1,955. 2,066. 2,311.84� 29� ILTRR(S/B/T)X84424H( )( )( )( )( )( )( )( ) 1,803. 1,979. 2,097. 2,351.90� 29� ILTRR(S/B/T)X90424H( )( )( )( )( )( )( )( ) 1,820. 2,002. 2,127. 2,390.96� 29� ILTRR(S/B/T)X96424H( )( )( )( )( )( )( )( ) 1,838. 2,025. 2,158. 2,430.108� 29� ILTRR(S/B/T)X108424H( )( )( )( )( )( )( )( ) 1,873. 2,072. 2,220. 2,511.
48� 90� 29� ILTRR(S/B/T)X90484H( )( )( )( )( )( )( )( ) 1,858. 2,052. 2,193. 2,476.96� 29� ILTRR(S/B/T)X96484H( )( )( )( )( )( )( )( ) 1,878. 2,079. 2,229. 2,523.108� 29� ILTRR(S/B/T)X108484H( )( )( )( )( )( )( )( ) 1,918. 2,132. 2,299. 2,614.
*Available with Glides only.
Order Code
Example: ILTRRSX72364H
IL Islands Collection byKnoll�
T TableRR Round RectilinearS Edge (S/B/T)X Foot72 Width36 Depth4 29� HighH Horizontal Grain
DirectionN Grommet option( ) Grommet finish(CC) Grommet location(114) Worksurface finish(SYN) Edge finish(114) Cone finish(114) Column finish(114) Foot finish
Specification Information
To order please specify patternnumber including:1. Grommet option:
N = None (no grommet)D4 = Narrow slot 4�WD8 = Narrow slot 8�WD12 = Narrow slot 12�WD18 = Narrow slot 18�WD24 = Narrow slot 24�WD36 = Narrow slot 36�WS = Power square*Refer to planning guide forgrommet options and locations.
2. Grommet finish:N = Not applicableD4 to D36 = B=Black, W=White(textured)S = 111, 114, 115, 117
3. Worksurface finish:L, V1, V2, V3
4. Edge finish:Complementary synthetic
5. Cone finish:Painted/texturedPolished aluminum
6. Column finish:Painted/texturedPolished aluminum
7. Foot finishPainted/texturedPolished aluminum
All Worksurfaces are 1 1/4� thick .
Edges:S = Square EdgeB = Thin beveled edge four sidesT = Thick beveled edge four sides
Grain Direction:H = HorizontalV = Vertical
*Foot:X = Glide
Height 29� is to top of worksurface.
Application Notes
The following upcharges apply:Beveled Edge (B4 & T4): $500Casters: $30Grommets D4, D8, D12, D18: $80eachGrommets D24, D36: $100 eachPolished finish: $200 (Cone,Column, Foot or all)
All electrical accessories arespecified separately.
Refer to Accessories section forelectrical component pricing.
Islands Collection by Knoll®
52
X-Base Tables - Conference29� High, Vertical GrainRound Rectilinear, Multi-Piece Top
description d w h pattern no. L V1 V2 V3
Round Rectilinear Table29� High
36� 120� 29� ILTRR(S/B/T)X120364V( )( )( )( )( )( )( )( ) $2,796. $3,403. $3,637. $4,166.132� 29� ILTRR(S/B/T)X132364V( )( )( )( )( )( )( )( ) 2,823. 3,430. 3,677. 4,217.144� 29� ILTRR(S/B/T)X144364V( )( )( )( )( )( )( )( ) 2,849. 3,457. 3,716. 4,268.156� 29� ILTRR(S/B/T)X156364V( )( )( )( )( )( )( )( ) 2,875. 3,484. 3,755. 4,319.
42� 120� 29� ILTRR(S/B/T)X120424V( )( )( )( )( )( )( )( ) 2,840. 3,448. 3,703. 4,251.132� 29� ILTRR(S/B/T)X132424V( )( )( )( )( )( )( )( ) 2,871. 3,480. 3,749. 4,311.144� 29� ILTRR(S/B/T)X144424V( )( )( )( )( )( )( )( ) 2,902. 3,511. 3,795. 4,371.156� 29� ILTRR(S/B/T)X156424V( )( )( )( )( )( )( )( ) 2,933. 3,542. 3,841. 4,430.
48� 120� 29� ILTRR(S/B/T)X120484V( )( )( )( )( )( )( )( ) 2,884. 3,493. 3,768. 4,336.132� 29� ILTRR(S/B/T)X132484V( )( )( )( )( )( )( )( ) 2,919. 3,528. 3,821. 4,405.144� 29� ILTRR(S/B/T)X144484V( )( )( )( )( )( )( )( ) 2,955. 3,564. 3,873. 4,472.156� 29� ILTRR(S/B/T)X156484V( )( )( )( )( )( )( )( ) 2,990. 3,600. 3,925. 4,540.
*Available with Glides only.
Order Code
Example: ILTRRSX120364H
IL Islands Collection byKnoll�
T TableRR Round RectilinearS Edge (S/B/T)X Foot120 Width36 Depth4 29� HighN Grommet option( ) Grommet finish(CC) Grommet location(114) Worksurface finish(SYN) Edge finish(114) Cone finish(114) Column finish(114) Foot finish
Specification Information
To order please specify patternnumber including:1. Grommet option:
N = None (no grommet)D4 = Narrow slot 4�WD8 = Narrow slot 8�WD12 = Narrow slot 12�WD18 = Narrow slot 18�WD24 = Narrow slot 24�WD36 = Narrow slot 36�WS = Power square*Refer to planning guide forgrommet options and locations.
2. Grommet finish:N = Not applicableD4 to D36 = B=Black, W=White(textured)S = 111, 114, 115, 117
3. Worksurface finish:L, V1, V2, V3
4. Edge finish:Complementary synthetic
5. Cone finish:Painted/texturedPolished aluminum
6. Column finish:Painted/texturedPolished aluminum
7. Foot finishPainted/texturedPolished aluminum
All Worksurfaces are 1 1/4� thick .
Edges:S = Square EdgeB = Thin beveled edge four sidesT = Thick beveled edge four sides
Grain Direction:H = HorizontalV = Vertical
*Foot:X = Glide
Height 29� is to top of worksurface.
Application Notes
The following upcharges apply:Beveled Edge (B4 & T4): $500Casters: $30Grommets D4, D8, D12, D18: $80eachGrommets D24, D36: $100 eachPolished finish: $300 (Cone,Column, Foot or all)
All electrical accessories arespecified separately.
Refer to Accessories section forelectrical component pricing.
Islands Collection by Knoll®
53
X-Base Tables - Conference29� High, Horizontal GrainRound Rectilinear, Multi-Piece Top
description d w h pattern no. L V1 V2 V3
Round Rectilinear Table29� High
36� 120� 29� ILTRR(S/B/T)X120364H( )( )( )( )( )( )( )( ) $2,898. $3,573. $3,833. $4,420.132� 29� ILTRR(S/B/T)X132364H( )( )( )( )( )( )( )( ) 2,928. 3,603. 3,877. 4,478.144� 29� ILTRR(S/B/T)X144364H( )( )( )( )( )( )( )( ) 2,957. 3,633. 3,920. 4,534.156� 29� ILTRR(S/B/T)X156364H( )( )( )( )( )( )( )( ) 2,986. 3,663. 3,964. 4,591.
42� 120� 29� ILTRR(S/B/T)X120424H( )( )( )( )( )( )( )( ) 2,947. 3,623. 3,906. 4,515.132� 29� ILTRR(S/B/T)X132424H( )( )( )( )( )( )( )( ) 2,982. 3,658. 3,957. 4,582.144� 29� ILTRR(S/B/T)X144424H( )( )( )( )( )( )( )( ) 3,016. 3,693. 4,008. 4,648.156� 29� ILTRR(S/B/T)X156424H( )( )( )( )( )( )( )( ) 3,050. 3,727. 4,059. 4,714.
48� 120� 29� ILTRR(S/B/T)X120484H( )( )( )( )( )( )( )( ) 2,996. 3,673. 3,978. 4,609.132� 29� ILTRR(S/B/T)X132484H( )( )( )( )( )( )( )( ) 3,035. 3,712. 4,037. 4,686.144� 29� ILTRR(S/B/T)X144484H( )( )( )( )( )( )( )( ) 3,075. 3,752. 4,095. 4,761.156� 29� ILTRR(S/B/T)X156484H( )( )( )( )( )( )( )( ) 3,114. 3,792. 4,153. 4,836.
*Available with Glides only.
Order Code
Example: ILTRRSX120364H
IL Islands Collection byKnoll�
T TableRR Round RectilinearS Edge (S/B/T)X Foot120 Width36 Depth4 29� HighN Grommet option( ) Grommet finish(CC) Grommet location(114) Worksurface finish(SYN) Edge finish(114) Cone finish(114) Column finish(114) Foot finish
Specification Information
To order please specify patternnumber including:1. Grommet option:
N = None (no grommet)D4 = Narrow slot 4�WD8 = Narrow slot 8�WD12 = Narrow slot 12�WD18 = Narrow slot 18�WD24 = Narrow slot 24�WD36 = Narrow slot 36�WS = Power square*Refer to planning guide forgrommet options and locations.
2. Grommet finish:N = Not applicableD4 to D36 = B=Black, W=White(textured)S = 111, 114, 115, 117
3. Worksurface finish:L, V1, V2, V3
4. Edge finish:Complementary synthetic
5. Cone finish:Painted/texturedPolished aluminum
6. Column finish:Painted/texturedPolished aluminum
7. Foot finishPainted/texturedPolished aluminum
All Worksurfaces are 1 1/4� thick .
Edges:S = Square EdgeB = Thin beveled edge four sidesT = Thick beveled edge four sides
Grain Direction:H = HorizontalV = Vertical
*Foot:X = Glide
Height 29� is to top of worksurface.
Application Notes
The following upcharges apply:Beveled Edge (B4 & T4): $500Casters: $30Grommets D4, D8, D12, D18: $80eachGrommets D24, D36: $100 eachPolished finish: $300 (Cone,Column, Foot or all)
All electrical accessories arespecified separately.
Refer to Accessories section forelectrical component pricing.
Islands Collection by Knoll®
54
X-Base Tables - Conference29� High, Horizontal GrainSoft Rectilinear, Single-Piece Top
description d w h pattern no. L V1 V2 V3
Soft Rectilinear29� High
36� 108� 29� ILTSR(S/B/T)X108364H( )( )( )( )( )( )( )( ) $1,828. $2,012. $2,141. $2,408.72� 29� ILTSR(S/B/T)X72364H( )( )( )( )( )( )( )( ) 1,738. 1,892. 1,982. 2,202.78� 29� ILTSR(S/B/T)X78364H( )( )( )( )( )( )( )( ) 1,753. 1,912. 2,009. 2,237.84� 29� ILTSR(S/B/T)X84364H( )( )( )( )( )( )( )( ) 1,768. 1,932. 2,035. 2,271.90� 29� ILTSR(S/B/T)X90364H( )( )( )( )( )( )( )( ) 1,783. 1,952. 2,061. 2,304.96� 29� ILTSR(S/B/T)X96364H( )( )( )( )( )( )( )( ) 1,798. 1,972. 2,088. 2,339.
42� 108� 29� ILTSR(S/B/T)X108424H( )( )( )( )( )( )( )( ) 1,873. 2,072. 2,220. 2,511.78� 29� ILTSR(S/B/T)X78424H( )( )( )( )( )( )( )( ) 1,785. 1,955. 2,066. 2,311.84� 29� ILTSR(S/B/T)X84424H( )( )( )( )( )( )( )( ) 1,803. 1,979. 2,097. 2,351.90� 29� ILTSR(S/B/T)X90424H( )( )( )( )( )( )( )( ) 1,820. 2,002. 2,127. 2,390.96� 29� ILTSR(S/B/T)X96424H( )( )( )( )( )( )( )( ) 1,838. 2,025. 2,158. 2,430.
48� 108� 29� ILTSR(S/B/T)X108484H( )( )( )( )( )( )( )( ) 1,918. 2,132. 2,299. 2,614.90� 29� ILTSR(S/B/T)X90484H( )( )( )( )( )( )( )( ) 1,858. 2,052. 2,193. 2,476.96� 29� ILTSR(S/B/T)X96484H( )( )( )( )( )( )( )( ) 1,878. 2,079. 2,229. 2,523.
*Available with Glides only.
Order Code
Example: ILTSRSX72364H
IL Islands Collection byKnoll�
T TableSR Soft RectilinearS Edge (S/B/T)X Foot72 Width36 Depth4 29� HighH Horizontal Grain
DirectionN Grommet option( ) Grommet finish(CC) Grommet location(114) Worksurface finish(SYN) Edge finish(114) Cone finish(114) Column finish(114) Foot finish
Specification Information
To order please specify patternnumber including:1. Grommet option:
N = None (no grommet)D4 = Narrow slot 4�WD8 = Narrow slot 8�WD12 = Narrow slot 12�WD18 = Narrow slot 18�WD24 = Narrow slot 24�WD36 = Narrow slot 36�WS = Power square*Refer to planning guide forgrommet options and locations.
2. Grommet finish:N = Not applicableD4 to D36 = B=Black, W=White(textured)S = 111, 114, 115, 117
3. Worksurface finish:L, V1, V2, V3
4. Edge finish:Complementary synthetic
5. Cone finish:Painted/texturedPolished aluminum
6. Column finish:Painted/texturedPolished aluminum
7. Foot finishPainted/texturedPolished aluminum
All Worksurfaces are 1 1/4� thick .
Edges:S = Square EdgeB = Thin beveled edge four sidesT = Thick beveled edge four sides
Grain Direction:H = HorizontalV = Vertical
*Foot:X = Glide
Height 29� is to top of worksurface.
Application Notes
The following upcharges apply:Beveled Edge (B4 & T4): $500Casters: $30Grommets D4, D8, D12, D18: $80eachGrommets D24, D36: $100 eachPolished finish: $200 (Cone,Column, Foot or all)
All electrical accessories arespecified separately.
Refer to Accessories section forelectrical component pricing.
Islands Collection by Knoll®
55
X-Base Tables - Conference29� High, Vertical GrainSoft Rectilinear, Multi-Piece Top
description d w h pattern no. L V1 V2 V3
Soft Rectilinear29� High
36� 120� 29� ILTSR(S/B/T)X120364V( )( )( )( )( )( )( )( ) $2,796. $3,403. $3,637. $4,166.132� 29� ILTSR(S/B/T)X132364V( )( )( )( )( )( )( )( ) 2,823. 3,430. 3,677. 4,217.144� 29� ILTSR(S/B/T)X144364V( )( )( )( )( )( )( )( ) 2,849. 3,457. 3,716. 4,268.156� 29� ILTSR(S/B/T)X156364V( )( )( )( )( )( )( )( ) 2,875. 3,484. 3,755. 4,319.
42� 120� 29� ILTSR(S/B/T)X120424V( )( )( )( )( )( )( )( ) 2,840. 3,448. 3,703. 4,251.132� 29� ILTSR(S/B/T)X132424V( )( )( )( )( )( )( )( ) 2,871. 3,480. 3,749. 4,311.144� 29� ILTSR(S/B/T)X144424V( )( )( )( )( )( )( )( ) 2,902. 3,511. 3,795. 4,371.156� 29� ILTSR(S/B/T)X156424V( )( )( )( )( )( )( )( ) 2,933. 3,542. 3,841. 4,430.
48� 120� 29� ILTSR(S/B/T)X120484V( )( )( )( )( )( )( )( ) 2,884. 3,493. 3,768. 4,336.132� 29� ILTSR(S/B/T)X132484V( )( )( )( )( )( )( )( ) 2,919. 3,528. 3,821. 4,405.144� 29� ILTSR(S/B/T)X144484V( )( )( )( )( )( )( )( ) 2,955. 3,564. 3,873. 4,472.156� 29� ILTSR(S/B/T)X156484V( )( )( )( )( )( )( )( ) 2,990. 3,600. 3,925. 4,540.
*Available with Glides only.
Order Code
Example: ILTSRSX120364H
IL Islands Collection byKnoll�
T TableSR Soft RectilinearS Edge (S/B/T)X Foot120 Width36 Depth4 29� HighH Horizontal Grain
DirectionN Grommet option( ) Grommet finish(CC) Grommet location(114) Worksurface finish(SYN) Edge finish(114) Cone finish(114) Column finish(114) Foot finish
Specification Information
To order please specify patternnumber including:1. Grommet option:
N = None (no grommet)D4 = Narrow slot 4�WD8 = Narrow slot 8�WD12 = Narrow slot 12�WD18 = Narrow slot 18�WD24 = Narrow slot 24�WD36 = Narrow slot 36�WS = Power square*Refer to planning guide forgrommet options and locations.
2. Grommet finish:N = Not applicableD4 to D36 = B=Black, W=White(textured)S = 111, 114, 115, 117
3. Worksurface finish:L, V1, V2, V3
4. Edge finish:Complementary synthetic
5. Cone finish:Painted/texturedPolished aluminum
6. Column finish:Painted/texturedPolished aluminum
7. Foot finishPainted/texturedPolished aluminum
All Worksurfaces are 1 1/4� thick .
Edges:S = Square EdgeB = Thin beveled edge four sidesT = Thick beveled edge four sides
Grain Direction:H = HorizontalV = Vertical
*Foot:X = Glide
Height 29� is to top of worksurface.
Application Notes
The following upcharges apply:Beveled Edge (B4 & T4): $500Casters: $30Grommets D4, D8, D12, D18: $80eachGrommets D24, D36: $100 eachPolished finish: $300 (Cone,Column, Foot or all)
All electrical accessories arespecified separately.
Refer to Accessories section forelectrical component pricing.
Islands Collection by Knoll®
56
X-Base Tables - Conference29� High, Horizontal GrainSoft Rectilinear, Multi-Piece Top
description d w h pattern no. L V1 V2 V3
Soft Rectilinear29� High
36� 120� 29� ILTSR(S/B/T)X120364H( )( )( )( )( )( )( )( ) $2,898. $3,573. $3,833. $4,420.132� 29� ILTSR(S/B/T)X132364H( )( )( )( )( )( )( )( ) 2,928. 3,603. 3,877. 4,478.144� 29� ILTSR(S/B/T)X144364H( )( )( )( )( )( )( )( ) 2,957. 3,633. 3,920. 4,534.156� 29� ILTSR(S/B/T)X156364H( )( )( )( )( )( )( )( ) 2,986. 3,663. 3,964. 4,591.
42� 120� 29� ILTSR(S/B/T)X120424H( )( )( )( )( )( )( )( ) 2,947. 3,623. 3,906. 4,515.132� 29� ILTSR(S/B/T)X132424H( )( )( )( )( )( )( )( ) 2,982. 3,658. 3,957. 4,582.144� 29� ILTSR(S/B/T)X144424H( )( )( )( )( )( )( )( ) 3,016. 3,693. 4,008. 4,648.156� 29� ILTSR(S/B/T)X156424H( )( )( )( )( )( )( )( ) 3,050. 3,727. 4,059. 4,714.
48� 120� 29� ILTSR(S/B/T)X120484H( )( )( )( )( )( )( )( ) 2,996. 3,673. 3,978. 4,609.132� 29� ILTSR(S/B/T)X132484H( )( )( )( )( )( )( )( ) 3,035. 3,712. 4,037. 4,686.144� 29� ILTSR(S/B/T)X144484H( )( )( )( )( )( )( )( ) 3,075. 3,752. 4,095. 4,761.156� 29� ILTSR(S/B/T)X156484H( )( )( )( )( )( )( )( ) 3,114. 3,792. 4,153. 4,836.
*Available with Glides only.
Order Code
Example: ILTSRSX120364H
IL Islands Collection byKnoll�
T TableSR Soft RectilinearS Edge (S/B/T)X Foot120 Width36 Depth4 29� HighH Horizontal Grain
DirectionN Grommet option( ) Grommet finish(CC) Grommet location(114) Worksurface finish(SYN) Edge finish(114) Cone finish(114) Column finish(114) Foot finish
Specification Information
To order please specify patternnumber including:1. Grommet option:
N = None (no grommet)D4 = Narrow slot 4�WD8 = Narrow slot 8�WD12 = Narrow slot 12�WD18 = Narrow slot 18�WD24 = Narrow slot 24�WD36 = Narrow slot 36�WS = Power square*Refer to planning guide forgrommet options and locations.
2. Grommet finish:N = Not applicableD4 to D36 = B=Black, W=White(textured)S = 111, 114, 115, 117
3. Worksurface finish:L, V1, V2, V3
4. Edge finish:Complementary synthetic
5. Cone finish:Painted/texturedPolished aluminum
6. Column finish:Painted/texturedPolished aluminum
7. Foot finishPainted/texturedPolished aluminum
All Worksurfaces are 1 1/4� thick .
Edges:S = Square EdgeB = Thin beveled edge four sidesT = Thick beveled edge four sides
Grain Direction:H = HorizontalV = Vertical
*Foot:X = Glide
Height 29� is to top of worksurface.
Application Notes
The following upcharges apply:Beveled Edge (B4 & T4): $500Casters: $30Grommets D4, D8, D12, D18: $80eachGrommets D24, D36: $100 eachPolished finish: $300 (Cone,Column, Foot or all)
All electrical accessories arespecified separately.
Refer to Accessories section forelectrical component pricing.
Islands Collection by Knoll®
57
MX Base Tables - Occasional Heights12�, 15� and 18� HighRound Tables
description d w h pattern no. L V1 V2 V3
Round Table12� High
45� dia. Table shown
45� 12� ILTRD(S/B/T)MG451( )( )( )( )( )( ) $1,000. $1,250. $1,350. $1,550.48� 12� ILTRD(S/B/T)MG481( )( )( )( )( )( ) 1,030. 1,288. 1,391. 1,597.54� 12� ILTRD(S/B/T)MG541( )( )( )( )( )( ) 1,061. 1,326. 1,432. 1,660.60� 12� ILTRD(S/B/T)MG601( )( )( )( )( )( ) 1,093. 1,366. 1,475. 1,710.
*Available with Glides only.
Round Table15� High
45� dia. Table shown
45� 15� ILTRD(S/B/T)MG452( )( )( )( )( )( ) 1,350. 1,550. 1,650. 1,850.48� 15� ILTRD(S/B/T)MG482( )( )( )( )( )( ) 1,391. 1,597. 1,700. 1,906.54� 15� ILTRD(S/B/T)MG542( )( )( )( )( )( ) 1,432. 1,644. 1,750. 1,982.60� 15� ILTRD(S/B/T)MG602( )( )( )( )( )( ) 1,475. 1,694. 1,803. 2,041.
*Available with Glides only.
Round Table18� High
45� dia. Table shown
45� 18� ILTRD(S/B/T)(MG/MC)453( )( )( )( )( )( ) 1,350. 1,550. 1,650. 1,850.48� 18� ILTRD(S/B/T)(MG/MC)483( )( )( )( )( )( ) 1,391. 1,597. 1,700. 1,906.54� 18� ILTRD(S/B/T)(MG/MC)543( )( )( )( )( )( ) 1,432. 1,644. 1,750. 1,982.60� 18� ILTRD(S/B/T)(MG/MC)603( )( )( )( )( )( ) 1,475. 1,694. 1,803. 2,041.
*Available with Glides and Casters.
45� diameter tables feature 3 legs48�, 54�, 60� diameter tables feature 4 legs
Order Code
Example: ILTRDSMG451
IL Islands Collection byKnoll�
T TableRD RoundS Edge (S/B/T)MG Foot (MG/MC)45 Size1 Height (1/2/3)N Grommet option( ) Grommet finish(114) Worksurface finish(SYN) Edge finish(114) Mount finish(114) Column finish(114) Foot finish
Specification Information
To order please specify patternnumber including:1. Grommet option:
N = None (no grommet)D8 = Narrow slot 8�W (45�, 48�& 54�)D12 = Wide Slide 12�W (60�)S = Power square
2. Grommet finish:N = Not applicableD8 / D12 = B=Black, W=White(textured)S = 111, 114, 115, 117
3. Worksurface finish:L, V1, V2, V3
4. Edge finish:Complementary synthetic
5. Mount finish:Painted/texturedPolished aluminum
6. Column finishPainted/texturedPolished aluminum
7. Foot finishPainted/texturedPolished aluminum
All Worksurfaces are 1 1/4� thick.
Edges:S = Square EdgeB = Thin beveled edge four sidesT = Thick beveled edge four sides
*Foot:MG = GlideMC = Caster
Height (to top of worksurface):1 = 12�H2 = 15�H3 = 18�H
Application Notes
The following upcharges apply:Beveled Edge (B & T): $500Casters: $30Grommets D4: $80Polished finish: $100 (Mount,Column, Foot or all)
All electrical accessories arespecified separately.
Refer to Accessories section forelectrical component pricing.
Islands Collection by Knoll®
58
MX Base Tables - Occasional Heights12�, 15� and 18� HighSquare Tables
description d w h pattern no. L V1 V2 V3
Square Table12� High
48� 12� ILTSQ(S/B/T)MG481( )( )( )( )( )( ) $1,030. $1,288. $1,391. $1,597.54� 12� ILTSQ(S/B/T)MG541( )( )( )( )( )( ) 1,061. 1,326. 1,432. 1,660.60� 12� ILTSQ(S/B/T)MG601( )( )( )( )( )( ) 1,093. 1,366. 1,475. 1,710.
*Available with Glides only.
Square Table15� High
48� 15� ILTSQ(S/B/T)MG482( )( )( )( )( )( ) 1,391. 1,597. 1,700. 1,906.54� 15� ILTSQ(S/B/T)MG542( )( )( )( )( )( ) 1,432. 1,644. 1,750. 1,982.60� 15� ILTSQ(S/B/T)MG602( )( )( )( )( )( ) 1,475. 1,694. 1,803. 2,041.
*Available with Glides only.
Square Table18� High
48� 18� ILTSQ(S/B/T)(MG/MC)483( )( )( )( )( )( ) 1,391. 1,597. 1,700. 1,906.54� 18� ILTSQ(S/B/T)(MG/MC)543( )( )( )( )( )( ) 1,432. 1,644. 1,750. 1,982.60� 18� ILTSQ(S/B/T)(MG/MC)603( )( )( )( )( )( ) 1,475. 1,694. 1,803. 2,041.
*Available with Glides and Casters.
Order Code
Example: ILTSQSMG481
IL Islands Collection byKnoll�
T TableSQ SquareS Edge (S/B/T)MG Foot (MG/MC)48 Width1 Height (1/2/3)N Grommet option( ) Grommet finish(114) Worksurface finish(SYN) Edge finish(114) Mount finish(114) Column finish(114) Foot finish
Specification Information
To order please specify patternnumber including:1. Grommet option:
N = None (no grommet)D8 = Narrow slot 8�W (48� &54�)D12 = Narrow Slot 12�W (60�)S = Power square
2. Grommet finish:N = Not applicableD8 / D12 = B=Black, W=White(textured)S = 111, 114, 115, 117
3. Worksurface finish:L, V1, V2, V3
4. Edge finish:Complementary synthetic
5. Mount finish:Painted/texturedPolished aluminum12�H = NA-top plate is black
6. Column finishPainted/texturedPolished aluminum
7. Foot finishPainted/texturedPolished aluminum
All Worksurfaces are 1 1/4� thick.
Edges:S = Square EdgeB = Thin beveled edge four sidesT = Thick beveled edge four sides
*Foot:MG = GlideMC = Caster
Height (to top of worksurface):1 = 12�H2 = 15�H3 = 18�H
Application Notes
The following upcharges apply:Beveled Edge (B & T): $500Casters: $30Grommets D8/12: $120Polished finish: $100 (Column,Foot or all)
All electrical accessories arespecified separately.
Refer to Accessories section forelectrical component pricing.
Islands Collection by Knoll®
59
MX Base Tables - Occasional Heights12�, 15� and 18� HighSquare Table with Curved Corners
description d w h pattern no. L V1 V2 V3
Square Table, Curved corners12� High
48� 48� 12� ILTSC(S/B/T)MG481( )( )( )( )( )( ) $1,300. $1,288. $1,391. $1,597.54� 54� 12� ILTSC(S/B/T)MG541( )( )( )( )( )( ) 1,339. 1,326. 1,432. 1,660.60� 60� 12� ILTSC(S/B/T)MG601( )( )( )( )( )( ) 1,379. 1,366. 1,475. 1,710.
*Available with Glides only.
Square Table, Curved corners15� High
48� 48� 15� ILTSC(S/B/T)MG482( )( )( )( )( )( ) 1,391. 1,597. 1,700. 1,906.54� 54� 15� ILTSC(S/B/T)MG542( )( )( )( )( )( ) 1,432. 1,644. 1,750. 1,982.60� 60� 15� ILTSC(S/B/T)MG602( )( )( )( )( )( ) 1,475. 1,694. 1,803. 2,041.
*Available with Glides only.
Square Table, Curved corners18� High
48� 48� 18� ILTSC(S/B/T)(MG/MC)483( )( )( )( )( )( ) 1,391. 1,597. 1,700. 1,906.54� 54� 18� ILTSC(S/B/T)(MG/MC)543( )( )( )( )( )( ) 1,432. 1,644. 1,750. 1,982.60� 60� 18� ILTSC(S/B/T)(MG/MC)603( )( )( )( )( )( ) 1,475. 1,694. 1,803. 2,041.
*Available with Glides and Casters.
Order Code
Example: ILTSCSMG481
IL Islands Collection byKnoll�
T TableSC Square with Curved
CornersS Edge (S/B/T)MG Foot (MG/MC)48 Size1 Height (1/2/3)N Grommet option( ) Grommet finish(114) Worksurface finish(SYN) Edge finish(114) Mount finish(114) Column finish(114) Leg finish
Specification Information
To order please specify patternnumber including:1. Grommet option:
N = None (no grommet)D8 = Narrow slot 8�W (48� &54�)D12 = Narrow Slot 12�W (60�)S = Power square
2. Grommet finish:N = Not applicableD8/D12 = B=Black, W=White(textured)S = 111, 114, 115, 117
3. Worksurface finish:L, V1, V2, V3
4. Edge finish:Complementary synthetic
5. Mount finish:Painted/texturedPolished aluminum, 12�H NA -top plate is black
6. Column finishPainted/texturedPolished aluminum
7. Foot finish:Painted /textured polishedaluminum
All Worksurfaces are 1 1/4� thick .
Edges:S = Square EdgeB = Thin beveled edge four sidesT = Thick beveled edge four sides
*Foot:MG = GlideMC = Caster
Height (to top of worksurface):1 = 12�H2 = 15�H3 = 18�H
Application Notes
�
The following upcharges apply:Beveled Edge (B & T): $650Casters: $30Grommets D8 & D12: $120Polished finish: $100 (Mount,Column, Foot or all)
All electrical accessories arespecified separately.
Islands Collection by Knoll®
60
MX Base Tables - Occasional Heights12�, 15� and 18� HighSoft Square Tables
description d w h pattern no. L V1 V2 V3
Soft Square Table12� High
48� 12� ILTSS(S/B/T)MG481( )( )( )( )( )( ) $1,300. $1,288. $1,391. $1,597.54� 12� ILTSS(S/B/T)MG541( )( )( )( )( )( ) 1,339. 1,326. 1,432. 1,660.60� 12� ILTSS(S/B/T)MG601( )( )( )( )( )( ) 1,379. 1,366. 1,475. 1,710.
*Available with Glides only.
Soft Square Table15� High
48� 15� ILTSS(S/B/T)MG482( )( )( )( )( )( ) 1,391. 1,597. 1,700. 1,906.54� 15� ILTSS(S/B/T)MG542( )( )( )( )( )( ) 1,432. 1,644. 1,750. 1,982.60� 15� ILTSS(S/B/T)MG602( )( )( )( )( )( ) 1,475. 1,694. 1,803. 2,041.
*Available with Glides only.
Soft Square Table18� High
48� 18� ILTSS(S/B/T)(MG/MC)483( )( )( )( )( )( ) 1,391. 1,597. 1,700. 1,906.54� 18� ILTSS(S/B/T)(MG/MC)543( )( )( )( )( )( ) 1,432. 1,644. 1,750. 1,982.60� 18� ILTSS(S/B/T)(MG/MC)603( )( )( )( )( )( ) 1,475. 1,694. 1,803. 2,041.
*Available with Glides and Casters.
Order Code
Example: ILTSSSMG481
IL Islands Collection byKnoll�
T TableSS Soft SquareS Edge (S/B/T)MG Foot (MG/MC)48 Size1 Height (1/2/3)N Grommet option( ) Grommet finish(114) Worksurface finish(SYN) Edge finish(114) Cone finish(114) Foot finish
Specification Information
To order please specify patternnumber including:1. Grommet option:
N = None (no grommet)D8 = Narrow slot 8�W (48� &54�)D12 = Narrow Slot 12�W (60�)S = Power square
2. Grommet finish:N = Not applicableD8 / D12 = B=Black, W=White(textured)
3. Worksurface finish:L, V1, V2, V3
4. Edge finish:Complementary synthetic
5. Mount finish:Painted/texturedPolished aluminum,12�H NA - top plate is black
6. Column finishPainted/texturedPolished aluminum
7. Foot finishPainted/texturedPolished aluminum
All Worksurfaces are 1 1/4� thick.
Edges:S = Square EdgeB = Thin beveled edge four sidesT = Thick beveled edge four sides
*Foot:MG = GlideMC = Caster
Height (to top of worksurface):1 = 12�H2 = 15�H3 = 18�H
Application Notes
The following upcharges apply:Beveled Edge (B & T): $500Casters: $30Grommets D8 /D12: $120Polished finish: $100 (Mount,Column, Foot or all)
All electrical accessories arespecified separately.
Refer to Accessories section forelectrical component pricing.
Islands Collection by Knoll®
61
MX Base Tables - Occasional Heights12�, 15� and 18� HighSoft Pentagon
description d w h pattern no. L V1 V2 V3
Soft Pentagon Table12� High
45�d Table shown
45� 12� ILTSP(S/B/T)MG451( )( )( )( )( )( ) $1,185. $1,481. $1,599. $1,836.48� 12� ILTSP(S/B/T)MG481( )( )( )( )( )( ) 1,220. 1,525. 1,647. 1,891.54� 12� ILTSP(S/B/T)MG541( )( )( )( )( )( ) 1,257. 1,571. 1,696. 1,967.60� 12� ILTSP(S/B/T)MG601( )( )( )( )( )( ) 1,294. 1,618. 1,747. 2,026.
*Available with Glides only.
Soft Pentagon Table15� High
54�d Table shown
45� 15� ILTSP(S/B/T)MG452( )( )( )( )( )( ) 1,660. 1,939. 2,064. 2,292.48� 15� ILTSP(S/B/T)MG482( )( )( )( )( )( ) 1,710. 1,997. 2,126. 2,361.54� 15� ILTSP(S/B/T)MG542( )( )( )( )( )( ) 1,761. 2,057. 2,190. 2,455.60� 15� ILTSP(S/B/T)MG602( )( )( )( )( )( ) 1,814. 2,119. 2,255. 2,529.
*Available with Glides only.
Soft Pentagon Table18� High
45�d Table shown
45� 18� ILTPT(S/B/T)(MG/MC)453( )( )( )( )( )( ) 1,660. 1,939. 2,064. 2,292.48� 18� ILTPT(S/B/T)(MG/MC)483( )( )( )( )( )( ) 1,710. 1,997. 2,126. 2,361.54� 18� ILTPT(S/B/T)(MG/MC)543( )( )( )( )( )( ) 1,761. 2,057. 2,190. 2,455.60� 18� ILTPT(S/B/T)(MG/MC)603( )( )( )( )( )( ) 1,814. 2,119. 2,255. 2,529.
*Available with Glides and Casters.
45� diameter tables feature 3 legs48�, 54� & 60� diameter tables feature 5 legs
Order Code
Example: ILTSPSMG451
IL Islands Collection byKnoll�
T TableSP Soft PentagonS Edge (S/B/T)MG Foot (MG/MC)45 Size1 Height (1/2/3)N Grommet option( ) Grommet finish(114) Worksurface finish(SYN) Edge finish(114) Mount finish(114) Column finish(114) Foot finish
Specification Information
To order please specify patternnumber including:1. Grommet option:
N = None (no grommet)D8 = Narrow slot 8�W (45�, 48�& 54�)D12 = Narrow Slot 12�W (60�)S = Power square
2. Grommet finish:N = Not applicableD8 / D12 = B=Black, W=White(textured)S = 111, 114, 115, 117
3. Worksurface finish:L, V1, V2, V3
4. Edge finish:Complementary synthetic
5. Mount finish:Painted/texturedPolished aluminum12�H NA - Top plate is black
6. Column finishPainted/texturedPolished aluminum
7. Foot finishPainted/texturedPolished aluminum
All Worksurfaces are 1 1/4� thick.
Edges:S = Square EdgeB = Thin beveled edge four sidesT = Thick beveled edge four sides
*Foot:MG = GlideMC = Caster
Height (to top of worksurface):1 = 12�H2 = 15�H3 = 18�H
Application Notes
The following upcharges apply:Beveled Edge (B & T): $500Casters: $30Grommets D8 / D12: $120Polished finish: $100 (Mount,Column, Foot or all)
All electrical accessories arespecified separately.
Refer to Accessories section forelectrical component pricing.
Islands Collection by Knoll®
62
MX Base Tables - Occasional Heights12�, 15� and 18� HighOrganic Pentagon Type A
description d w h pattern no. L V1 V2 V3
Soft Pentagon TableType A, 12� High
48� 30� 12� ILTOPA(S/B/T)MG481( )( )( )( )( )( )( ) $1,071. $1,339. $1,446. $1,660.56� 36� 12� ILTOPA(S/B/T)MG541( )( )( )( )( )( )( ) 1,103. 1,379. 1,490. 1,727.60� 42� 12� ILTOPA(S/B/T)MG601( )( )( )( )( )( )( ) 1,136. 1,421. 1,534. 1,779.
*Available with Glides only.
Soft Pentagon TableType A, 15� High
48� 30� 15� ILTOPA(S/B/T)MG482( )( )( )( )( )( )( ) 1,446. 1,660. 1,767. 1,982.54� 36� 15� ILTOPA(S/B/T)MG542( )( )( )( )( )( )( ) 1,490. 1,710. 1,821. 2,061.60� 42� 15� ILTOPA(S/B/T)MG602( )( )( )( )( )( )( ) 1,534. 1,761. 1,875. 2,123.
*Available with Glides only.
Soft Pentagon TableType A, 18� High
48� 30� 18� ILTOPA(S/B/T)(MG/MC)483( )( )( )( )( )( )( ) 1,446. 1,660. 1,767. 1,982.54� 36� 18� ILTOPA(S/B/T)(MG/MC)543( )( )( )( )( )( )( ) 1,490. 1,710. 1,821. 2,061.60� 42� 18� ILTOPA(S/B/T)(MG/MC)603( )( )( )( )( )( )( ) 1,534. 1,761. 1,875. 2,123.
*Available with Glides and Casters.
Order Code
Example: ILTOPASMG481
IL Islands Collection byKnoll�
T TableOPA Organic Pentagon Type
AS Edge (S/B/T)MG Foot (MG/MC)48 Size1 Height (1/2/3)N Grommet option( ) Grommet finish(114) Worksurface finish(SYN) Edge finish(114) Mount finish(114) Column finish(114) Foot finish
Specification Information
To order please specify patternnumber including:1. Grommet option:
N = None (no grommet)D8 = Narrow slot 8�W (48� &54�)D12 = Narrow Slot 12�W (60�)S = Power square
2. Grommet finish:N = Not applicableD8 /D12 = B=Black, W=White(textured)S = 111, 114, 115, 117
3. Worksurface finish:L, V1, V2, V3
4. Edge finish:Complementary synthetic
5. Mount finish;:Painted/texturedPolished aluminum12�H NA - Top plate is black
6. Column finishPainted/texturedPolished aluminum
7. Foot finishPainted/texturedPolished aluminum
All Worksurfaces are 1 1/4� thick.
Edges:S = Square EdgeB = Thin beveled edge four sidesT = Thick beveled edge four sides
*Foot:MG = GlideMC = Caster
Height (to top of worksurface):1 = 12�H2 = 15�H3 = 18�H
Application Notes
The following upcharges apply:Beveled Edge (B & T): $500Casters: $30Grommets D8 / D12: $120Polished finish: $100 (Mount,Column, Foot or all)
All electrical accessories arespecified separately.
Refer to Accessories section forelectrical component pricing.
Islands Collection by Knoll®
63
MX Base Tables - Occasional Heights12�, 15� and 18� HighOrganic Pentagon Type B
description d w h pattern no. L V1 V2 V3
Organic Pentagon TableType B, 12� High
48� 48� 12� ILTOPB(S/B/T)MG481( )( )( )( )( )( )( ) $1,071. $1,339. $1,446. $1,660.54� 54� 12� ILTOPB(S/B/T)MG541( )( )( )( )( )( )( ) 1,103. 1,379. 1,490. 1,727.60� 60� 12� ILTOPB(S/B/T)MG601( )( )( )( )( )( )( ) 1,136. 1,421. 1,534. 1,779.
*Available with Glides only.
Organic Pentagon TableType B, 15� High
48� 48� 15� ILTOPB(S/B/T)MG482( )( )( )( )( )( )( ) 1,446. 1,660. 767. 1,982.54� 54� 15� ILTOPB(S/B/T)MG542( )( )( )( )( )( )( ) 1,490. 1,710. 1,821. 2,061.60� 60� 15� ILTOPB(S/B/T)MG602( )( )( )( )( )( )( ) 1,534. 1,761. 1,875. 2,123.
*Available with Glides only.
Organic Pentagon TableType B, 18� High
48� 48� 18� ILTOPB(S/B/T)(MG/MC)483( )( )( )( )( )( )( ) 1,446. 1,660. 767. 1,982.54� 54� 18� ILTOPB(S/B/T)(MG/MC)543( )( )( )( )( )( )( ) 1,490. 1,710. 1,821. 2,061.60� 60� 18� ILTOPB(S/B/T)(MG/MC)603( )( )( )( )( )( )( ) 1,534. 1,761. 1,875. 2,123.
*Available with Glides and Casters.
Order Code
Example: ILTOPBSMG54451
IL Islands Collection byKnoll�
T TableOPB Organic Pentagon Type
BS Edge (S/B/T)MG Foot (MG/MC)54 Depth45 Width1 Height (1/2/3)N Grommet option( ) Grommet finish(114) Worksurface finish(SYN) Edge finish(114) Mount finish(114) Column finish(114) Foot finish
Specification Information
To order please specify patternnumber including:1. Grommet option:
N = None (no grommet)D8 = Narrow slot 8�W (54�)D12 = Narrow Slot 12�W (60�)S = Power square
2. Grommet finish:N = Not applicableD8 / D12= B=Black, W=White(textured)S = 111, 114, 115, 117
3. Worksurface finish:L, V1, V2, V3
4. Edge finish:Complementary synthetic
5. Mount finish:Painted/texturedPolished aluminum
6. Column finishPainted/texturedPolished aluminum
7. Foot finishPainted/texturedPolished aluminum
All Worksurfaces are 1 1/4� thick.
Edges:S = Square EdgeB = Thin beveled edge four sidesT = Thick beveled edge four sides
*Foot:MG = GlideMC = Caster
Height (to top of worksurface):1 = 12�H2 = 15�H3 = 18�H
Application Notes
The following upcharges apply:Beveled Edge (B & T): $500Casters: $30Grommets D8 /D12: $120Polished finish: $100 (Mount,Column, Foot or all)
All electrical accessories arespecified separately.
Refer to Accessories section forelectrical component pricing.
Islands Collection by Knoll®
64
MX Base Tables - Occasional Heights12�, 15� and 18� HighCairo Shaped Tables
description d w h pattern no. L V1 V2 V3
Cairo Shaped Table12� High
54� 45� 12� ILTCY(S/B/T)MG54451( )( )( )( )( )( ) $1,339. $1,326. $1,432. $1,660.60� 48� 12� ILTCY(S/B/T)MG60481( )( )( )( )( )( ) 1,379. 1,366. 1,475. 1,710.
*Available with Glides only.
Cairo Shaped Table15� High
54� 45� 15� ILTCY(S/B/T)MG54452( )( )( )( )( )( ) 1,406. 1,392. 1,504. 1,743.60� 48� 15� ILTCY(S/B/T)MG60482( )( )( )( )( )( ) 1,448. 1,434. 1,549. 1,796.
*Available with Glides only.
Cairo Shaped Table18� High
54� 45� 18� ILTCY(S/B/T)(MG/MC)54453( )( )( )( )( )( ) 1,406. 1,392. 1,504. 1,743.60� 48� 18� ILTCY(S/B/T)(MG/MC)60483( )( )( )( )( )( ) 1,448. 1,434. 1,549. 1,796.
*Available with Glides and Casters.
Order Code
Example: ILTCSYSMG54451
IL Islands Collection byKnoll�
T TableCY Cairo Shaped tablesS Edge (S/B/T)MG Foot (MG/MC)54 Depth45 Width1 Hight (1/2/3)N Grommet option( ) Grommet finish(114) Worksurface finish(SYN) Edge finish(114) Mount finish(114) Column finish(114) Foot finish
Specification Information
To order please specify patternnumber including:1. Grommet option:
N = None (no grommet)D4 = Narrow slot 4�WS = Power square
2. Grommet finish:N = Not applicableD8 /D12 = B=Black, W=White(textured)S = 111, 114, 115, 117
3. Worksurface finish:L, V1, V2, V3
4. Edge finish:Complementary synthetic
5. Mount finish:Painted/texturedPolished aluminum
6. Column finishPainted/texturedPolished aluminum
7. Foot finish:Painted/texturedPolished aluminum
All Worksurfaces are 1 1/4� thick .
Edges:S = Square EdgeB = Thin beveled edge four sidesT = Thick beveled edge four sides
*Foot:MG = GlideMC = Casters
Height (to top of worksurface):1 = 12�H2 = 15�H3 = 18�H
Application Notes
The following upcharges apply:Beveled Edge (B & T): $500Casters: $30Grommets D4: $80Polished finish: $100 (Mount,Column, Foot or all)
All electrical accessories arespecified separately.
Refer to Accessories section forelectrical component pricing.
Islands Collection by Knoll®
65
MX Base Tables - Desk Height29� HighRound Tables
description d w h pattern no. L V1 V2 V3
Round Table29� High
45� dia. Table shown
45� 45� 29� ILTRD(S/B/T)(MG/MC)454( )( )( )( )( )( )( ) $1,391. $1,597. $1,700. $1,906.48� 48� 29� ILTRD(S/B/T)(MG/MC)484( )( )( )( )( )( )( ) 1,432. 1,644. 1,750. 1,963.54� 54� 29� ILTRD(S/B/T)(MG/MC)544( )( )( )( )( )( )( ) 1,475. 1,694. 1,803. 2,041.60� 60� 29� ILTRD(S/B/T)(MG/MC)604( )( )( )( )( )( )( ) 1,519. 1,745. 1,857. 2,102.
*Available with Glides and Casters.
45� diameter tables feature 3 legs48� 54� & 60� diameter tables feature 4 legs
Order Code
Example: ILTRDSMG454
IL Islands Collection byKnoll�
T TableRD RoundS Edge (S/B/T)MG Foot (MG/MC)45 Width4 29� HighN Grommet option( ) Grommet finish(114) Worksurface finish(SYN) Edge finish(114) Mount finish(114) Column finish(114) Foot finish
Specification Information
To order please specify patternnumber including:1. Grommet option:
N = None (no grommet)D8 = Narrow slot 8�W (45�, 48�& 54�)D12 = Narrow Slot 12�W (60�)S = Power square
2. Grommet finish:N = Not applicableD8 / D12 = B=Black, W=White(textured)S = 111, 114, 115, 117
3. Worksurface finish:L, V1, V2, V3
4. Edge finish:Complementary synthetic
5. Mount finish:Painted/texturedPolished aluminum12�H NA - Top plate is black
6. Column finish:Painted/texturedPolished aluminum
7. Foot finishPainted/texturedPolished aluminum
All Worksurfaces are 1 1/4� thick .
Edges:S = Square EdgeB = Thin beveled edge four sidesT = Thick beveled edge four sides
*Foot:MG = GlideMC = Caster
Height 29� is to top of worksurface.
Application Notes
The following upcharges apply:Beveled Edge (B & T): $500Casters: $30Grommets D8/D12: $120Polished finish: $100 (Mount,Column, Foot or all)
All electrical accessories arespecified separately.
Refer to Accessories section forelectrical component pricing.
Islands Collection by Knoll®
66
MX Base Tables - Desk Height29� HighSquare, Soft Square and Square with Curved Corners Tables
description d w h pattern no. L V1 V2 V3
Square Table29� High
48� 29� ILTSA(S/B/T)(MG/MC)484( )( )( )( )( )( ) $1,446. $1,660. $1,767. $2,058.54� 29� ILTSA(S/B/T)(MG/MC)544( )( )( )( )( )( ) 1,490. 1,710. 1,821. 2,140.60� 29� ILTSA(S/B/T)(MG/MC)604( )( )( )( )( )( ) 1,534. 1,761. 1,875. 2,204.
*Available with Glides and Casters.
Soft Square Table29� High
48� 29� ILTSS(S/B/T)(MG/MC)484( )( )( )( )( )( ) 1,446. 1,660. 1,767. 2,058.54� 29� ILTSS(S/B/T)(MG/MC)544( )( )( )( )( )( ) 1,490. 1,710. 1,821. 2,140.60� 29� ILTSS(S/B/T)(MG/MC)604( )( )( )( )( )( ) 1,534. 1,761. 1,875. 2,204.
*Available with Glides and Casters.
Square Table, 29� HighCurved Corners
48� 29� ILTSC(S/B/T)(MG/MC)484( )( )( )( )( )( ) 1,446. 1,660. 1,767. 2,058.54� 29� ILTSC(S/B/T)(MG/MC)544( )( )( )( )( )( ) 1,490. 1,710. 1,821. 2,140.60� 29� ILTSC(S/B/T)(MG/MC)604( )( )( )( )( )( ) 1,534. 1,761. 1,875. 2,204.
*Available with Glides and Casters.
Order Code
Example: ILTSSSMG484
IL Islands Collection byKnoll�
T TableSA Square
SS=Soft SquareSC=Square with Curvedcorners
S Edge (S/B/T)MG Foot (MG/MC)48 Width / Depth4 29� HighN Grommet option( ) Grommet finish(114) Worksurface finish(SYN) Edge finish(114) Mount finish(114) Column finish(114) Foot finish
Specification Information
To order please specify patternnumber including:1. Grommet option:
N = None (no grommet)D8 = Narrow slot 8�W (48� &54�)D12 = Narrow Slot 12�W (60�)S = Power square
2. Grommet finish:N = Not applicableD8 / D12 = B=Black, W=White(textured)S = 111, 114, 115, 117
3. Worksurface finish:L, V1, V2, V3
4. Edge finish:Complementary synthetic
5. Mount finish:Painted/texturedPolished aluminum12�H NA - Top plate is black
6. Column finish:Painted/texturedPolished aluminum
7. Foot finishPainted/texturedPolished aluminum
All Worksurfaces are 1 1/4� thick .
Edges:S = Square EdgeB = Thin beveled edge four sidesT = Thick beveled edge four sides
*Foot:MG = GlideMC = Caster
Height 29� is to top of worksurface.
Application Notes
The following upcharges apply:Beveled Edge (B & T): $650 forSquare TableBeveled Edge (B & T): $500 forSoft Square Table, and Squarewith Curved CornersCasters: $30Grommets D8/D12: $120Polished finish: $100 (Mount,Column, Foot or all)
All electrical accessories arespecified separately.
Refer to Accessories section forelectrical component pricing.
Islands Collection by Knoll®
67
MX Base Tables - Desk Height29� HighSoft Pentagon, Organic Pentagon Type A and B
description d w h pattern no. L V1 V2 V3
Soft Pentagon Table29� High
45�d Table shown
45� 29� ILTPT(S/B/T)(MG/MC)454( )( )( )( )( )( ) $1,826. $2,133. $2,270. $2,521.48� 29� ILTPT(S/B/T)(MG/MC)484( )( )( )( )( )( ) 1,881. 2,197. 2,338. 2,597.54� 29� ILTPT(S/B/T)(MG/MC)544( )( )( )( )( )( ) 1,937. 2,262. 2,408. 2,701.60� 29� ILTPT(S/B/T)(MG/MC)604( )( )( )( )( )( ) 1,995. 2,330. 2,481. 2,782.
*Available with Glides and Casters.45� diameter tables feature 3 legs48�, 54�, 60� diameter tables feature 5 legs
Organic Pentagon TableType A, 29� High
48� 29� ILTOPA(S/B/T)(MG/MC)484( )( )( )( )( )( ) 1,706. 1,959. 2,086. 2,378.54� 29� ILTOPA(S/B/T)(MG/MC)544( )( )( )( )( )( ) 1,758. 2,018. 2,148. 2,473.60� 29� ILTOPA(S/B/T)(MG/MC)604( )( )( )( )( )( ) 1,810. 2,079. 2,213. 2,547.
*Available with Glides and Casters.
Organic Pentagon TableType B, 29� High
48� 29� ILTOPB(S/B/T)(MG/MC)484( )( )( )( )( )( ) 1,706. 1,959. 2,086. 2,378.54� 29� ILTOPB(S/B/T)(MG/MC)544( )( )( )( )( )( ) 1,758. 2,018. 2,148. 2,473.60� 29� ILTOPB(S/B/T)(MG/MC)604( )( )( )( )( )( ) 1,810. 2,079. 2,213. 2,547.
*Available with Glides and Casters.
Order Code
Example: ILTOPASMG484
IL Islands Collection byKnoll�
T TableOPA Soft Pentagon
OPA=Organic PentagonType AOPB=Organic PentagonType B
S Edge (S/B/T)MG Foot (MG/MC)48 Width4 29� HighN Grommet option( ) Grommet finish(114) Worksurface finish(SYN) Edge finish(114) Mount finish(114) Column finish(114) Foot finish
Specification Information
To order please specify patternnumber including:1. Grommet option:
N = None (no grommet)D8 = Narrow slot 8�W (45�, 48�& 54�)D12 = Narrow Slot 12�W (60�)S = Power square
2. Grommet finish:N = Not applicableD8 /D12 = B=Black, W=White(textured)S = 111, 114, 115, 117
3. Worksurface finish:L, V1, V2, V3
4. Edge finish:Complementary synthetic
5. Mount finish:Painted/texturedPolished aluminum
6. Column finish:Painted/texturedPolished aluminum
7. Foot finishPainted/texturedPolished aluminum
All Worksurfaces are 1 1/4� thick .
Edges:S = Square EdgeB = Thin beveled edge four sidesT = Thick beveled edge four sides
*Foot:MG= GlideMC = Caster
Height 29� is to top of worksurface.
Application Notes
The following upcharges apply:Beveled Edge (B & T): $500Casters: $30Grommets D8 / D12: $120Polished finish: $100 (Mount,Column, Foot or all)
All electrical accessories arespecified separately.
Refer to Accessories section forelectrical component pricing.
Islands Collection by Knoll®
68
MX Base Tables - Desk Height29� HighCairo Shaped Tables
description d w h pattern no. L V1 V2 V3
Cairo Shaped Table29� High
54� 45� 29� ILTCY(S/B/T)(MG/MC)54454( )( )( )( )( )( )( ) $1,547. $1,532. $1,654. $1,918.60� 48� 29� ILTCY(S/B/T)(MG/MC)60484( )( )( )( )( )( )( ) 1,593. 1,578. 1,704. 1,975.
*Available with Glides and Casters.
Order Code
Example: ILTCYSMG54454
IL Islands Collection byKnoll�
T TableCY Cairo Shaped tablesS Edge (S/B/T)MG Foot (MG/MC)54 Width45 Depth4 HightN Grommet option( ) Grommet finish(114) Worksurface finish(SYN) Edge finish(114) Mount finish(114) Column finish(114) Foot finish
Specification Information
To order please specify patternnumber including:1. Grommet option:
N = None (no grommet)D4 = Narrow slot 4�WS = Power square
2. Grommet finish:N = Not applicableD4 = B=Black, W=White(textured)S = 111, 114, 115, 117
3. Worksurface finish:L, V1, V2, V3
4. Edge finish:Complementary synthetic
5. Mount finish:Painted/texturedPolished aluminum
6. Column finishPainted/texturedPolished aluminum
7. Foot finish:Painted/texturedPolished aluminum
All Worksurfaces are 1 1/4� thick .
Edges:S = Square EdgeB = Thin beveled edge four sidesT = Thick beveled edge four sides
*Foot:MG = GlideMC = Caster
Height (to top of worksurface):1 = 12�H2 = 15�H3 = 18�H
Application Notes
The following upcharges apply:Beveled Edge (B & T): $500Casters: $30Grommets D4: $80Polished finish: $100 (Mount,Column, Foot or all)
All electrical accessories arespecified separately.
Refer to Accessories section forelectrical component pricing.
Islands Collection by Knoll®
69
MX Base Tables - Standing Height36� and 42� HighRound Tables
description d w h pattern no. L V1 V2 V3
Round Table36� High
45� dia. Table shown
45� 36� ILTRD(S/B/T)MG455( )( )( )( )( )( )( ) $1,418. $1,628. $1,733. $2,020.48� 36� ILTRD(S/B/T)MG485( )( )( )( )( )( )( ) 1,461. 1,677. 1,785. 2,080.54� 36� ILTRD(S/B/T)MG545( )( )( )( )( )( )( ) 1,505. 1,728. 1,839. 2,164.60� 36� ILTRD(S/B/T)MG605( )( )( )( )( )( )( ) 1,550. 1,779. 1,894. 2,229.
*Available with Glides only.
Round Table42� High
45� dia. Table shown
45� 42� ILTRD(S/B/T)MG456( )( )( )( )( )( )( ) 1,461. 1,677. 1,785. 2,080.48� 42� ILTRD(S/B/T)MG486( )( )( )( )( )( )( ) 1,505. 1,728. 1,839. 2,143.54� 42� ILTRD(S/B/T)MG546( )( )( )( )( )( )( ) 1,550. 1,779. 1,894. 2,229.60� 42� ILTRD(S/B/T)MG606( )( )( )( )( )( )( ) 1,596. 1,833. 1,951. 2,295.
*Available with Glides only.
45� diameter tables feature 3 legs48� 54� & 60� diameter tables feature 4 legs
Order Code
Example: ILTRDSMG485
IL Islands Collection byKnoll�
T TableRD RoundS Edge (S/B/T)MG Foot48 Width5 36� High, 6=42� HighN Grommet option( ) Grommet finish(114) Worksurface finish(SYN) Edge finish(114) Mount finish(114) Column finish(114) Foot finish
Specification Information
To order please specify patternnumber including:1. Grommet option:
N = None (no grommet)D8 = Narrow slot 8�W (45�, 48�& 54�)D12 = Narrow Slot 12�W (60�)S = Power square
2. Grommet finish:N = Not applicableD8 / D12 = B=Black, W=White(textured)S = 111, 114, 115, 117
3. Worksurface finish:L, V1, V2, V3
4. Edge finish:Complementary synthetic
5. Mount finish:Painted/texturedPolished aluminum
6. Column finish:Painted/texturedPolished aluminum
7. Foot finishPainted/texturedPolished aluminum
All Worksurfaces are 1 1/4� thick .
Edges:S = Square EdgeB = Thin beveled edge four sidesT = Thick beveled edge four sides
*Foot:MG = Glide
Height 36� and 42� is to top ofworksurface.
Application Notes
The following upcharges apply:Beveled Edge (B & T): $500Casters: $30Grommets D8 /D12: $120Polished finish: $100 (Mount,Column, Foot or all)
All electrical accessories arespecified separately.
Refer to Accessories section forelectrical component pricing.
Islands Collection by Knoll®
70
MX Base Tables - Standing Height36� and 42� HighSquare Tables
description d w h pattern no. L V1 V2 V3
Square Table36� High
48� 36� ILTSA(S/B/T)MG485( )( )( )( )( )( )( ) $1,504. $1,727. $1,838. $2,140.54� 36� ILTSA(S/B/T)MG545( )( )( )( )( )( )( ) 1,549. 1,779. 1,893. 2,226.60� 36� ILTSA(S/B/T)MG605( )( )( )( )( )( )( ) 1,596. 1,832. 1,950. 2,293.
*Available with Glides only.
Square Table42� High
48� 42� ILTSA(S/B/T)MG486( )( )( )( )( )( )( ) 1,504. 1,727. 1,838. 2,140.54� 42� ILTSA(S/B/T)MG546( )( )( )( )( )( )( ) 1,549. 1,779. 1,893. 2,226.60� 42� ILTSA(S/B/T)MG606( )( )( )( )( )( )( ) 1,596. 1,832. 1,950. 2,293.
*Available with Glides only.
Order Code
Example: ILTSASMG485
IL Islands Collection byKnoll�
T TableSA SquareS Edge (S/B/T)MG Foot48 Width / Depth5 36� High, 6=42� HighN Grommet option( ) Grommet finish(114) Worksurface finish(SYN) Edge finish(114) Mount finish(114) Column finish(114) Foot finish
Specification Information
To order please specify patternnumber including:1. Grommet option:
N = None (no grommet)D8 = Narrow slot 8�W (48� &54�)D12 = Narrow Slot 12�W (60�)S = Power square
2. Grommet finish:N = Not applicableD8 /D12 = B=Black, W=White(textured)S = 111, 114, 115, 117
3. Worksurface finish:L, V1, V2, V3
4. Edge finish:Complementary synthetic
5. Mount finish:Painted/texturedPolished aluminum
6. Column finish:Painted/texturedPolished aluminum
7. Foot finishPainted/texturedPolished aluminum
All Worksurfaces are 1 1/4� thick .
Edges:S = Square EdgeB = Thin beveled edge four sidesT = Thick beveled edge four sides
*Foot:MG= Glide
Height 36� and 42� is to top ofworksurface.
Application Notes
The following upcharges apply:Beveled Edge (B & T): $650 forSquare TableCasters: $30Grommets D8 /D12: $120Polished finish: $100 (Mount,Column, Foot or all)
All electrical accessories arespecified separately.
Refer to Accessories section forelectrical component pricing.
Islands Collection by Knoll®
71
MX Base Tables - Standing Height36� and 42� HighSoft Square and Square with Curved Corners
description d w h pattern no. L V1 V2 V3
Square Table36� High
48� 36� ILTSA(S/B/T)MG485( )( )( )( )( )( )( ) $1,504. $1,727. $1,838. $2,140.54� 36� ILTSA(S/B/T)MG545( )( )( )( )( )( )( ) 1,549. 1,779. 1,893. 2,226.60� 36� ILTSA(S/B/T)MG605( )( )( )( )( )( )( ) 1,596. 1,832. 1,950. 2,293.
*Available with Glides only.
Square Table42� High
48� 42� ILTSA(S/B/T)MG486( )( )( )( )( )( )( ) 1,504. 1,727. 1,838. 2,140.54� 42� ILTSA(S/B/T)MG546( )( )( )( )( )( )( ) 1,549. 1,779. 1,893. 2,226.60� 42� ILTSA(S/B/T)MG606( )( )( )( )( )( )( ) 1,596. 1,832. 1,950. 2,293.
*Available with Glides only.
Square Table, 36� HighCurved Corners
48� 36� ILTSC(S/B/T)MG485( )( )( )( )( )( )( ) 1,504. 1,727. 1,838. 2,140.54� 36� ILTSC(S/B/T)MG545( )( )( )( )( )( )( ) 1,549. 1,779. 1,893. 2,226.60� 36� ILTSC(S/B/T)MG605( )( )( )( )( )( )( ) 1,596. 1,832. 1,950. 2,293.
*Available with Glides only.
Square Table, 42� HighCurved Corners
48� 42� ILTSC(S/B/T)MG486( )( )( )( )( )( )( ) 1,504. 1,727. 1,838. 2,140.54� 42� ILTSC(S/B/T)MG546( )( )( )( )( )( )( ) 1,549. 1,779. 1,893. 2,226.60� 42� ILTSC(S/B/T)MG606( )( )( )( )( )( )( ) 1,596. 1,832. 1,950. 2,293.
*Available with Glides only.
Order Code
Example: ILTSCSMG485
IL Islands Collection byKnoll�
T TableSS Soft Square
SC = Square withCurved corners
S Edge (S/B/T)MG Foot48 Width5 36� High, 6=42� HighN Grommet option( ) Grommet finish(114) Worksurface finish(SYN) Edge finish(114) Mount finish(114) Column finish(114) Foot finish
Specification Information
To order please specify patternnumber including:1. Grommet option:
N = None (no grommet)D8 = Narrow slot 8�W (48� &54�)D12 = Narrow Slot 12�W (60�)S = Power square
2. Grommet finish:N = Not applicableD8 /D12 = B=Black, W=White(textured)S = 111, 114, 115, 117
3. Worksurface finish:L, V1, V2, V3
4. Edge finish:Complementary synthetic
5. Mount finish:Painted/texturedPolished aluminum
6. Column finish:Painted/texturedPolished aluminum
7. Foot finishPainted/texturedPolished aluminum
All Worksurfaces are 1 1/4� thick .
Edges:S = Square EdgeB = Thin beveled edge four sidesT = Thick beveled edge four sides
*Foot:MG = Glide
Height 36� and 42� is to top ofworksurface.
Application Notes
The following upcharges apply:Beveled Edge (B & T): $500 forSoft Square and Square withCurved corner TablesCasters: $30Grommets D8 /D12: $120Polished finish: $100 (Mount,Column, Foot or all)
All electrical accessories arespecified separately.
Refer to Accessories section forelectrical component pricing.
Islands Collection by Knoll®
72
MX Base Tables - Standing Height36� and 42� HighSoft Pentagon
description d w h pattern no. L V1 V2 V3
Soft Pentagon Table36� High
45�d Table shown
45� 36� ILTSP(S/B/T)MG455( )( )( )( )( )( ) $2,009. $2,346. $2,497. $2,774.48� 36� ILTSP(S/B/T)MG485( )( )( )( )( )( ) 2,069. 2,416. 2,572. 2,857.54� 36� ILTSP(S/B/T)MG545( )( )( )( )( )( ) 2,131. 2,489. 2,649. 2,971.60� 36� ILTSP(S/B/T)MG605( )( )( )( )( )( ) 2,195. 2,563. 2,729. 3,060.
Soft Pentagon Table42� High
45�d Table shown
45� 42� ILTSP(S/B/T)MG456( )( )( )( )( )( ) 2,009. 2,346. 2,497. 2,774.48� 42� ILTSP(S/B/T)MG486( )( )( )( )( )( ) 2,069. 2,416. 2,572. 2,857.54� 42� ILTSP(S/B/T)MG546( )( )( )( )( )( ) 2,131. 2,489. 2,649. 2,971.60� 42� ILTSP(S/B/T)MG606( )( )( )( )( )( ) 2,195. 2,563. 2,729. 3,060.
45� diameter tables feature 3 legs48�, 54� & 60� diameter tables feature 5 legs
Order Code
Example: ILTPTSMG485
IL Islands Collection byKnoll�
T TablePT Soft PentagonS Edge (S/B/T)MG Foot48 Width5 36� High, 6=42� HighN Grommet option( ) Grommet finish(114) Worksurface finish(SYN) Edge finish(114) Cone finish(114) Column finish(114) Foot finish
Specification Information
To order please specify patternnumber including:1. Grommet option:
N = None (no grommet)D8 = Narrow slot 8�W (45�, 48�& 54�)D12 = Narrow Slot 12�W (60�)S = Power square
2. Grommet finish:N = Not applicableD8 / D12 = B=Black, W=White(textured)S = 111, 114, 115, 117
3. Worksurface finish:L, V1, V2, V3
4. Edge finish:Complementary synthetic
5. Mount finish:Painted/texturedPolished aluminum
6. Column finish:Painted/texturedPolished aluminum
7. Foot finishPainted/texturedPolished aluminum
All Worksurfaces are 1 1/4� thick .
Edges:S = Square EdgeB = Thin beveled edge four sidesT = Thick beveled edge four sides
*Foot:MG = Glide
Height 36� and 42� is to top ofworksurface.
Application Notes
The following upcharges apply:Beveled Edge (B & T): $500Casters: $30Grommets D8 /D12: $120Polished finish: $100(Mount,Column, Foot or all)
All electrical accessories arespecified separately.
Refer to Accessories section forelectrical component pricing.
Islands Collection by Knoll®
73
MX Base Tables - Standing Height36� and 42� HighOrganic Pentagon Type A and B
description d w h pattern no. L V1 V2 V3
Organic Pentagon TableType A, 36� High
48� 36� ILTOPA(S/B/T)MG485( )( )( )( )( )( )( ) $1,741. $1,998. $2,127. $2,426.54� 36� ILTOPA(S/B/T)MG545( )( )( )( )( )( )( ) 1,793. 2,058. 2,191. 2,523.60� 36� ILTOPA(S/B/T)MG605( )( )( )( )( )( )( ) 1,847. 2,120. 2,257. 2,598.
*Available with Glides only.
Organic Pentagon TableType A, 42� High
48� 42� ILTOPA(S/B/T)MG486( )( )( )( )( )( )( ) 1,741. 1,998. 2,127. 2,426.54� 42� ILTOPA(S/B/T)MG546( )( )( )( )( )( )( ) 1,793. 2,058. 2,191. 2,523.60� 42� ILTOPA(S/B/T)MG606( )( )( )( )( )( )( ) 1,847. 2,120. 2,257. 2,598.
*Available with Glides only.
Organic Pentagon TableType B, 36� High
48� 36� ILTOPB(S/B/T)MG485( )( )( )( )( )( )( ) 1,741. 1,998. 2,127. 2,426.54� 36� ILTOPB(S/B/T)MG545( )( )( )( )( )( )( ) 1,793. 2,058. 2,191. 2,523.60� 36� ILTOPB(S/B/T)MG605( )( )( )( )( )( )( ) 1,847. 2,120. 2,257. 2,598.
*Available with Glides only.
Organic Pentagon TableType B, 42� High
48� 42� ILTOPB(S/B/T)MG486( )( )( )( )( )( )( ) 1,741. 1,998. 2,127. 2,426.54� 42� ILTOPB(S/B/T)MG546( )( )( )( )( )( )( ) 1,793. 2,058. 2,191. 2,523.60� 42� ILTOPB(S/B/T)MG606( )( )( )( )( )( )( ) 1,847. 2,120. 2,257. 2,598.
*Available with Glides only.
Order Code
Example: ILTOPASMG5
IL Islands Collection byKnoll�
T TableOPA Organic Pentagon Type
AOPB=Organic PentagonType B
S Edge (S/B/T)MG Foot48 Width5 36� High, 6=42� HighN Grommet option( ) Grommet finish(114) Worksurface finish(SYN) Edge finish(114) Mount finish(114) Column finish(114) Foot finish
Specification Information
To order please specify patternnumber including:1. Grommet option:
N = None (no grommet)D8 = Narrow slot 8�W (48� &54�)D12 = Narrow slot 12�W (60�)S = Power square
2. Grommet finish:N = Not applicableD8 / D12 = B=Black, W=White(textured)S = 111, 114, 115, 117
3. Worksurface finish:L, V1, V2, V3
4. Edge finish:Complementary synthetic
5. Mount finish:Painted/texturedPolished aluminum
6. Column finish:Painted/texturedPolished aluminum
7. Foot finishPainted/texturedPolished aluminum
All Worksurfaces are 1 1/4� thick .
Edges:S = Square EdgeB = Thin beveled edge four sidesT = Thick beveled edge four sides
*Foot:MG = Glide
Height 36� and 42� is to top ofworksurface.
Application Notes
The following upcharges apply:Beveled Edge (B & T): $500Casters: $30Grommets D8 /D12: $120Polished finish: $100 (Mount,Column, Foot or all)
All electrical accessories arespecified separately.
Refer to Accessories section forelectrical component pricing.
Islands Collection by Knoll®
74
MX Base Tables - Standing Height36� and 42� HighCairo Shaped Tables
description d w h pattern no. L V1 V2 V3
Cairo Shaped Table36� High
54� 45� 36� ILTCY(S/B/T)MG54455( )( )( )( )( )( )( ) $1,670. $1,654. $1,787. $2,071.60� 48� 36� ILTCY(S/B/T)MG60485( )( )( )( )( )( )( ) 1,720. 1,704. 1,840. 2,133.
*Available with Glides only.
Cairo Shaped Table42� High
54� 45� 42� ILTCY(S/B/T)MG54456( )( )( )( )( )( )( ) 1,732. 1,715. 1,853. 2,148.60� 48� 42� ILTCY(S/B/T)MG60486( )( )( )( )( )( )( ) 1,748. 1,767. 1,908. 2,212.
*Available with Glides only.
Order Code
Example: ILTCYSMG54455
IL Islands Collection byKnoll�
T TableCY Cairo Shaped tablesS Edge (S/B/T)MG Foot54 Width45 Depth5 HightN Grommet option( ) Grommet finish(114) Worksurface finish(SYN) Edge finish(114) Mount finish(114) Column finish(114) Foot finish
Specification Information
To order please specify patternnumber including:1. Grommet option:
N = None (no grommet)D4 = Narrow slot 4�S = Power square
2. Grommet finish:N = Not applicableD4 = Black, W=White (textured)S = 111, 114, 115, 117
3. Worksurface finish:L, V1, V2, V3
4. Edge finish:Complementary synthetic
5. Mount finish:Painted/texturedPolished aluminum
6. Column finishPainted/texturedPolished aluminum
7. Foot finish:Painted/texturedPolished aluminum
All Worksurfaces are 1 1/4� thick .
Edges:S = Square EdgeB = Thin beveled edge four sidesT = Thick beveled edge four sides
*Foot:MG = GlideMC = Caster
Height (to top of worksurface):1 = 12�H2 = 15�H3 = 18�H
Application Notes
The following upcharges apply:Beveled Edge (B & T): $500Casters: $30Grommets D4: $80Polished finish: $100 (Mount,Column, Foot or all)
All electrical accessories arespecified separately.
Refer to Accessories section forelectrical component pricing.
Islands Collection by Knoll®
75
MX Base Tables - Conference29� High, Horizontal or Vertical GrainRacetrack, Single-Piece Top
description d w h pattern no. L V1 V2 V3
Racetrack29� High
48� 96� 29� ILTRT(S/B/T)M96484(H/V)N( )( )( )( ) $2,862. $2,910. $3,104. $3,880.108� 29� ILTRT(S/B/T)M108484(H/V)N( )( )( )( ) 2,921. 2,966. 3,149. 4,883.120� 29� ILTRT(S/B/T)M120484(H/V)N( )( )( )( ) 3,011. 3,058. 3,246. 5,034.
54� 96� 29� ILTRT(S/B/T)M96544(H/V)N( )( )( )( ) 2,950. 3,000. 3,200. 4,550.108� 29� ILTRT(S/B/T)M108544(H/V)N( )( )( )( ) 3,011. 3,058. 3,246. 5,034.120� 29� ILTRT(S/B/T)M120544(H/V)N( )( )( )( ) 3,104. 3,153. 3,347. 5,190.
60� 108� 29� ILTRT(S/B/T)M108604(H/V)N( )( )( )( ) 3,104. 3,153. 3,347. 5,190.120� 29� ILTRT(S/B/T)M120604(H/V)N( )( )( )( ) 3,200. 3,250. 3,450. 5,350.
Order Code
Example: ILTRTSM96544H
IL Islands Collection byKnoll�
T TableRT RacetrackS Edge (S/B/T)M Base MX96 Width54 Depth4 29� HighH Horizontal Grain
DirectionN Grommet option( ) Grommet finish(114) Worksurface finish(SYN) Edge finish(114) Column finish(114) Foot finish
Specification Information
To order please specify patternnumber including:1. Grommet option:
N = None (no grommet)D = Narrow slot (length)P = Power Center with lid(length)G = Power Center no lidW = Wide Cannel with lid set(length) - comes with pre-definedset of lidsM = Wide Channel no lids(length)S = Power SquareGrommet options depend upontable top width:96�W options: N, D12 (2locations), D45 (centered), P9 &G9 (2 locations), W45 & M45(centered), S (2 locations)108�W options: N, D12 (2locations), D54 (centered), P9 &G9 (2 locations), W54 & M54(centered), S (2 locations)120�W options: N, D18 (2locations), D72 (centered), P18& G18 (2 locations), W72 & M72(centered), S (2 locations)
2. Grommet finish:N = Not applicableD: B=Black, W=White (texturedpaint)P: Painted / texturedG: Painted / texturedW: Painted / texturedS = 111, 114, 115, 118
3. Worksurface finish:L, V1, V2, V3
4. Edge finish:Complementary synthetic
5. Column finish:Painted/texturedPolished aluminum
6. Foot finishPainted/texturedPolished aluminum
All Worksurfaces are 1 1/4� thick .
Edges:S = Square EdgeB = Thin beveled edge four sidesT = Thick beveled edge four sides
Grain Direction:H = HorizontalV = Vertical
Height 29� is to top of worksurface.
Application Notes
The following upcharges apply:
Beveled Edge (B & T): $800Grommets: D18 = $200D45, D54, D72, M45, M54, M72 =$360P9 & G9 = $260P18 = $340P36 = $490W45 = $880W54 = $1140
Polished finish: $200 (Column,Foot or all)
All electrical accessories arespecified separately.
Edges:B= Thin beveled edge four sidesT= Thick beveled edge four sides
Islands Collection by Knoll®
76
MX Base Tables - Conference29� High, Horizontal or Vertical GrainRacetrack, Multi-Piece Top
description d w h pattern no. L V1 V2 V3
Racetrack29� High
48� 132� 29� ILTRT(S/B/T)M132484(H/V)N( )( )( )( ) $3,905. $3,952. $4,234. $6,210.144� 29� ILTRT(S/B/T)M144484(H/V)N( )( )( )( ) 4,022. 4,070. 4,361. 6,396.156� 29� ILTRT(S/B/T)M156484(H/V)N( )( )( )( ) 4,143. 4,192. 4,492. 6,588.180� 29� ILTRT(S/B/T)M180484(H/V)N( )( )( )( ) 5,294. 5,339. 5,704. 8,807.216� 29� ILTRT(S/B/T)M216484(H/V)N( )( )( )( ) 5,457. 5,504. 5,881. 9,080.
54� 132� 29� ILTRT(S/B/T)M132544(H/V)N( )( )( )( ) 4,026. 4,074. 4,365. 6,402.144� 29� ILTRT(S/B/T)M144544(H/V)N( )( )( )( ) 4,146. 4,196. 4,496. 6,594.156� 29� ILTRT(S/B/T)M156544(H/V)N( )( )( )( ) 4,271. 4,322. 4,631. 6,792.180� 29� ILTRT(S/B/T)M180544(H/V)N( )( )( )( ) 5,457. 5,504. 5,881. 9,080.216� 29� ILTRT(S/B/T)M216544(H/V)N( )( )( )( ) 5,626. 5,675. 6,063. 9,361.
60� 132� 29� ILTRT(S/B/T)M132604(H/V)N( )( )( )( ) 4,150. 4,200. 4,500. 6,600.144� 29� ILTRT(S/B/T)M144604(H/V)N( )( )( )( ) 4,275. 4,326. 4,635. 6,798.156� 29� ILTRT(S/B/T)M156604(H/V)N( )( )( )( ) 4,403. 4,456. 4,774. 7,002.180� 29� ILTRT(S/B/T)M180604(H/V)N( )( )( )( ) 5,626. 5,675. 6,063. 9,361.216� 29� ILTRT(S/B/T)M216604(H/V)N( )( )( )( ) 5,800. 5,850. 6,250. 9,650.
Order Code
Example: ILTRTSM132484H
IL Islands Collection byKnoll�
T TableRT RacetrackS Edge (S/B/T)M Base MX132 Width48 Depth4 29� HighH Horizontal Grain
DirectionN Grommet option( ) Grommet finish(114) Worksurface finish(114) Edge finish(114) Column finish(114) Foot finish
Specification Information
To order please specify patternnumber including:1. Grommet option:
N = None (no grommet)D = Narrow slot (length)P = Power Center with lid(length)G = Power Center no lidW = Wide Cannel with lid set(length) - comes with pre-definedset of lidsM = Wide Channel no lids(length)S = Power SquareGrommet options depend upontable top width:132�W options: N, D18 (2locations), D72 (centered), P18& G18 (2 locations), W72 & M72(centered), S (2 locations)144�W options: N, D30 (2locations), D90 (centered), P36& G36 (2 locations), W90 & M90(centered), S (2 locations)156�W options: N, D30 (2locations), D99 (centered), P36& G36 (2 locations), W99 & M99(centered), S (3 locations)180�W options: N, D45 (2locations), D126 (centered), P36& G36 (centered), S (4 locations)216�W options: N, D54 (2locations), D153 (centered), P36& G36 (2 locations), W153 &M153 (centered), S (4 locations)
2. Grommet finish:N = Not applicableD: B=Black, W=White (texturedpaint)P: Painted / texturedG: Painted / texturedW: Painted / texturedS = 111, 114, 115, 118
3. Worksurface finish:L, V1, V2, V3
4. Edge finish:Complementary synthetic
5. Column finish:Painted/texturedPolished aluminum
6. Foot finishPainted/texturedPolished aluminum
All Worksurfaces are 1 1/4� thick. Height29� is to top of worksurface .
Edges:S = Square EdgeB = Thin beveled edge four sidesT = Thick beveled edge four sides
Grain Direction:H = HorizontalV = Vertical
Application Notes
The following upcharges apply:
Beveled Edge (B & T): $1600Grommets: D18 = $200D30 = $240D45, D54 = $720D72, M72 = $360D90, D99 = $600D126, D153 = $750P18 = $340P36 = $490W72 = $1450W90 = $1760W99 = $2020W126 = $2380W153 = $2740G18 = $520G36 = $660M90, M99 = $620M126, M153 = $780
Polished finish: $200 (Column,Foot or all)
All electrical accessories arespecified separately. Refer toAccessories for electricalcomponents pricing.
Islands Collection by Knoll®
77
MX Base Tables - Conference29� High, Horizontal or Vertical GrainRectilinear, Single-Piece Top
description d w h pattern no. L V1 V2 V3
Rectilinear29� High
48� 96� 29� ILTRL(S/B/T)M96484(H/V)N( )( )( )( ) $2,862. $2,910. $3,104. $3,880.108� 29� ILTRL(S/B/T)M108484(H/V)N( )( )( )( ) 2,921. 2,966. 3,149. 4,883.120� 29� ILTRL(S/B/T)M120484(H/V)N( )( )( )( ) 3,011. 3,058. 3,246. 5,034.
54� 96� 29� ILTRL(S/B/T)M96544(H/V)N( )( )( )( ) 2,950. 3,000. 3,200. 4,550.108� 29� ILTRL(S/B/T)M108544(H/V)N( )( )( )( ) 3,011. 3,058. 3,246. 5,034.120� 29� ILTRL(S/B/T)M120544(H/V)N( )( )( )( ) 3,104. 3,153. 3,347. 5,190.
60� 108� 29� ILTRL(S/B/T)M108604(H/V)N( )( )( )( ) 3,104. 3,153. 3,347. 5,190.120� 29� ILTRL(S/B/T)M120604(H/V)N( )( )( )( ) 3,200. 3,250. 3,450. 5,350.
Order Code
Example: ILTRLSM96544H
IL Islands Collection byKnoll�
T TableRL RectilinearS Edge (S/B/T)M Base MX96 Width54 Depth4 29� HighH Horizontal Grain
DirectionN Grommet option( ) Grommet finish(114) Worksurface finish(SYN) Edge finish(114) Column finish(114) Foot finish
Specification Information
To order please specify patternnumber including:1. Grommet option:
N = None (no grommet)D = Narrow slot (length)P = Power Center with lid(length)G = Power Center no lidW = Wide Cannel with lid set(length) - comes with pre-definedset of lidsM = Wide Channel no lids(length)S = Power SquareGrommet options depend upontable top width:96�W options: N, D12 (2locations), D45 (centered), P9 &G9 (2 locations), W45 & M45(centered), S (2 locations)108�W options: N, D12 (2locations), D54 (centered), P9 &G9 (2 locations), W54 & M54(centered), S (2 locations)120�W options: N, D18 (2locations), D72 (centered), P18& G18 (2 locations), W72 & M72(centered), S (2 locations)
2. Grommet finish:N = Not applicableD: B=Black, W=White (texturedpaint)P: Painted / texturedG: Painted / texturedW: Painted / texturedS = 111, 114, 115, 118
3. Worksurface finish:L, V1, V2, V3
4. Edge finish:Complementary synthetic
5. Column finish:Painted/texturedPolished aluminum
6. Foot finishPainted/texturedPolished aluminum
All Worksurfaces are 1 1/4� thick .
Edges:S = Square EdgeB = Thin beveled edge four sidesT = Thick beveled edge four sides
Grain Direction:H = HorizontalV = Vertical
Height 29� is to top of worksurface.
Application Notes
The following upcharges apply:
Beveled Edge (B & T): $800Grommets: D18 = $200;D45, D54, D72, M45, M54, M72 =$360P9 & G9 = $260P18 = $340P36 = $490W45 = $880W54 = $1140
Polished finish: $200 (Column,Foot or all)
All electrical accessories arespecified separately.
Edges:B= Thin beveled edge four sidesT= Thick beveled edge four sides
Islands Collection by Knoll®
78
MX Base Tables - Conference29� High, Horizontal or Vertical GrainRectilinear, Multi-Piece Top
description d w h pattern no. L V1 V2 V3
Rectilinear29� High
48� 132� 29� ILTRL(S/B/T)M132484(H/V)N( )( )( )( ) $3,905. $3,952. $4,234. $6,210.144� 29� ILTRL(S/B/T)M144484(H/V)N( )( )( )( ) 4,022. 4,070. 4,361. 6,396.156� 29� ILTRL(S/B/T)M156484(H/V)N( )( )( )( ) 4,143. 4,192. 4,492. 6,588.180� 29� ILTRL(S/B/T)M180484(H/V)N( )( )( )( ) 5,294. 5,339. 5,704. 8,807.216� 29� ILTRL(S/B/T)M216484(H/V)N( )( )( )( ) 5,457. 5,504. 5,881. 9,080.
54� 132� 29� ILTRL(S/B/T)M132544(H/V)N( )( )( )( ) 4,026. 4,074. 4,365. 6,402.144� 29� ILTRL(S/B/T)M144544(H/V)N( )( )( )( ) 4,146. 4,196. 4,496. 6,594.156� 29� ILTRL(S/B/T)M156544(H/V)N( )( )( )( ) 4,271. 4,322. 4,631. 6,792.180� 29� ILTRL(S/B/T)M180544(H/V)N( )( )( )( ) 5,457. 5,504. 5,881. 9,080.216� 29� ILTRL(S/B/T)M216544(H/V)N( )( )( )( ) 5,626. 5,675. 6,063. 9,361.
60� 132� 29� ILTRL(S/B/T)M132604(H/V)N( )( )( )( ) 4,150. 4,200. 4,500. 6,600.144� 29� ILTRL(S/B/T)M144604(H/V)N( )( )( )( ) 4,275. 4,326. 4,635. 6,798.156� 29� ILTRL(S/B/T)M156604(H/V)N( )( )( )( ) 4,403. 4,456. 4,774. 7,002.180� 29� ILTRL(S/B/T)M180604(H/V)N( )( )( )( ) 5,626. 5,675. 6,063. 9,361.216� 29� ILTRL(S/B/T)M216604(H/V)N( )( )( )( ) 5,800. 5,850. 6,250. 9,650.
Order Code
Example: ILTRLSM132484H
IL Islands Collection byKnoll�
T TableRL RectilinearS Edge (S/B/T)M Base MX132 Width48 Depth4 29� HighH Horizontal Grain
DirectionN Grommet option( ) Grommet finish(114) Worksurface finish(114) Edge finish(114) Column finish(114) Foot finish
Specification Information
To order please specify patternnumber including:1. Grommet option:
N = None (no grommet)D = Narrow slot (length)P = Power Center with lid(length)G = Power Center no lidW = Wide Cannel with lid set(length) - comes with pre-definedset of lidsM = Wide Channel no lids(length)S = Power SquareGrommet options depend upontable top width:132�W options: N, D18 (2locations), D72 (centered), P18& G18 (2 locations), W72 & M72(centered), S (2 locations)144�W options: N, D30 (2locations), D90 (centered), P36& G36 (2 locations), W90 & M90(centered), S (2 locations)156�W options: N, D30 (2locations), D99 (centered), P36& G36 (2 locations), W99 & M99(centered), S (3 locations)180�W options: N, D45 (2locations), D126 (centered), P36& G36 (centered), S (4 locations)216�W options: N, D54 (2locations), D153 (centered), P36& G36 (2 locations), W153 &M153 (centered), S (4 locations)
2. Grommet finish:N = Not applicableD: B=Black, W=White (texturedpaint)P: Painted / texturedG: Painted / texturedW: Painted / texturedS = 111, 114, 115, 118
3. Worksurface finish:L, V1, V2, V3
4. Edge finish:Complementary synthetic
5. Column finish:Painted/texturedPolished aluminum
6. Foot finishPainted/texturedPolished aluminum
All Worksurfaces are 1 1/4� thick. Height29� is to top of worksurface .
Edges:S = Square EdgeB = Thin beveled edge four sidesT = Thick beveled edge four sides
Grain Direction:H = HorizontalV = Vertical
Application Notes
The following upcharges apply:
Beveled Edge (B & T): $1600Grommets: D18 = $200D30 = $240D45, D54 = $720D72, M72 = $360D90, D99 = $600D126, D153 = $750P18 = $340P36 = $490W72 = $1450W90 = $1760W99 = $2020W126 = $2380W153 = $2740G18 = $520G36 = $660M90, M99 = $620M126, M153 = $780
Polished finish: $200 (Column,Foot or all)
All electrical accessories arespecified separately. Refer toAccessories for electricalcomponents pricing.
Islands Collection by Knoll®
79
MX Base Tables - Conference29� High, Horizontal or Vertical GrainRectilinear with Curved Corners, Single-Piece Top
description d w h pattern no. L V1 V2 V3
Rectilinear with Curved Corners29� High
48� 96� 29� ILTRC(S/B/T)M96484(H/V)N( )( )( )( ) $2,862. $2,910. $3,104. $3,880.108� 29� ILTRC(S/B/T)M108484(H/V)N( )( )( )( ) 2,921. 2,966. 3,149. 4,883.120� 29� ILTRC(S/B/T)M120484(H/V)N( )( )( )( ) 3,011. 3,058. 3,246. 5,034.
54� 96� 29� ILTRC(S/B/T)M96544(H/V)N( )( )( )( ) 2,950. 3,000. 3,200. 4,550.108� 29� ILTRC(S/B/T)M108544(H/V)N( )( )( )( ) 3,011. 3,058. 3,246. 5,034.120� 29� ILTRC(S/B/T)M120544(H/V)N( )( )( )( ) 3,104. 3,153. 3,347. 5,190.
60� 108� 29� ILTRC(S/B/T)M108604(H/V)N( )( )( )( ) 3,104. 3,153. 3,347. 5,190.120� 29� ILTRC(S/B/T)M120604(H/V)N( )( )( )( ) 3,200. 3,250. 3,450. 5,350.
Order Code
Example: ILTRCSM96544H
IL Islands Collection byKnoll�
T TableRC Rectilinear with Curved
CornersS Edge (S/B/T)M Base MX96 Width54 Depth4 29� HighH Horizontal Grain
DirectionN Grommet option( ) Grommet finish(114) Worksurface finish(114) Edge finish(114) Column finish(114) Foot finish
Specification Information
To order please specify patternnumber including:1. Grommet option:
N = None (no grommet)D = Narrow slot (length)P = Power Center with lid(length)G = Power Center no lidW = Wide Cannel with lid set(length) - comes with pre-definedset of lidsM = Wide Channel no lids(length)S = Power SquareGrommet options depend upontable top width:96�W options: N, D12 (2locations), D45 (centered), P9 &G9 (2 locations), W45 & M45(centered), S (2 locations)108�W options: N, D12 (2locations), D54 (centered), P9 &G9 (2 locations), W54 & M54(centered), S (2 locations)120�W options: N, D18 (2locations), D72 (centered), P18& G18 (2 locations), W72 & M72(centered), S (2 locations)
2. Grommet finish:N = Not applicableD: B=Black, W=White (texturedpaint)P: Painted / texturedG: Painted / texturedW: Painted / texturedS = 111, 114, 115, 118
3. Worksurface finish:L, V1, V2, V3
4. Edge finish:Complementary synthetic
5. Column finish:Painted/texturedPolished aluminum
6. Foot finishPainted/texturedPolished aluminum
All Worksurfaces are 1 1/4� thick .
Edges:S = Square EdgeB = Thin beveled edge four sidesT = Thick beveled edge four sides
Grain Direction:H = HorizontalV = Vertical
Height 29� is to top of worksurface.
Application Notes
The following upcharges apply:
Beveled Edge (B & T): $800Grommets: D18 = $200D45, D54, D72, M45, M54, M72 =$360P9 & G9 = $260P18 = $340P36 = $490W45 = $880W54 = $1140
Polished finish: $200 (Column,Foot or all)
All electrical accessories arespecified separately.
Edges:B= Thin beveled edge four sidesT= Thick beveled edge four sides
Islands Collection by Knoll®
80
MX Base Tables - Conference29� High, Horizontal or Vertical GrainRectilinear with Curved Corners, Multi-Piece Top
description d w h pattern no. L V1 V2 V3
Rectilinear with Curved Corners29� High
48� 132� 29� ILTRC(S/B/T)M132484(H/V)N( )( )( )( ) $3,905. $3,952. $4,232. $6,210.144� 29� ILTRC(S/B/T)M144484(H/V)N( )( )( )( ) 4,022. 4,070. 4,361. 6,396.156� 29� ILTRC(S/B/T)M156484(H/V)N( )( )( )( ) 4,143. 4,192. 4,492. 6,588.180� 29� ILTRC(S/B/T)M180484(H/V)N( )( )( )( ) 5,294. 5,339. 5,704. 8,807.216� 29� ILTRC(S/B/T)M216484(H/V)N( )( )( )( ) 5,457. 5,504. 5,881. 9,080.
54� 132� 29� ILTRC(S/B/T)M132544(H/V)N( )( )( )( ) 4,026. 4,074. 4,365. 6,402.144� 29� ILTRC(S/B/T)M144544(H/V)N( )( )( )( ) 4,146. 4,196. 4,496. 6,594.156� 29� ILTRC(S/B/T)M156544(H/V)N( )( )( )( ) 4,271. 4,322. 4,631. 6,792.180� 29� ILTRC(S/B/T)M180544(H/V)N( )( )( )( ) 5,457. 5,504. 5,881. 9,080.216� 29� ILTRC(S/B/T)M216544(H/V)N( )( )( )( ) 5,626. 5,675. 6,063. 9,361.
60� 132� 29� ILTRC(S/B/T)M132604(H/V)N( )( )( )( ) 4,150. 4,200. 4,500. 6,600.144� 29� ILTRC(S/B/T)M144604(H/V)N( )( )( )( ) 4,275. 4,326. 4,635. 6,798.156� 29� ILTRC(S/B/T)M156604(H/V)N( )( )( )( ) 4,403. 4,456. 4,774. 7,002.180� 29� ILTRC(S/B/T)M180604(H/V)N( )( )( )( ) 5,626. 5,675. 6,063. 9,361.216� 29� ILTRC(S/B/T)M216604(H/V)N( )( )( )( ) 5,800. 5,850. 6,250. 9,650.
Order Code
Example: ILTRCSM132484(H/V)
IL Islands Collection byKnoll�
T TableRC Rectilinear with Curved
CornersS Edge (S/B/T)M Base MX132 Width48 Depth4 29� HighH Horizontal Grain
DirectionN Grommet option( ) Grommet finish(114) Worksurface finish(114) Edge finish(114) Column finish(114) Foot finish
Specification Information
To order please specify patternnumber including:1. Grommet option:
N = None (no grommet)D = Narrow slot (length)P = Power Center with lid(length)G = Power Center no lidW = Wide Cannel with lid set(length) - comes with pre-definedset of lidsM = Wide Channel no lids(length)S = Power SquareGrommet options depend upontable top width:132�W options: N, D18 (2locations), D72 (centered), P18& G18 (2 locations), W72 & M72(centered), S (2 locations)144�W options: N, D30 (2locations), D90 (centered), P36& G36 (2 locations), W90 & M90(centered), S (2 locations)156�W options: N, D30 (2locations), D99 (centered), P36& G36 (2 locations), W99 & M99(centered), S (3 locations)180�W options: N, D45 (2locations), D126 (centered), P36& G36 (centered), S (4 locations)216�W options: N, D54 (2locations), D153 (centered), P36& G36 (2 locations), W153 &M153 (centered), S (4 locations)
2. Grommet finish:N = Not applicableD: B=Black, W=White (texturedpaint)P: Painted / texturedG: Painted / texturedW: Painted / texturedS = 111, 114, 115, 118
3. Worksurface finish:L, V1, V2, V3
4. Edge finish:Complementary synthetic
5. Column finish:Painted/texturedPolished aluminum
6. Foot finishPainted/texturedPolished aluminum
All Worksurfaces are 1 1/4� thick. Height29� is to top of worksurface .
Edges:S = Square EdgeB = Thin beveled edge four sidesT = Thick beveled edge four sides
Grain Direction:H = HorizontalV = Vertical
Application Notes
The following upcharges apply:
Beveled Edge (B & T): $1600Grommets: D18 = $200D30 = $240D45, D54 = $720D72, M72 = $360D90, D99 = $600D126, D153 = $750P18 = $340P36 = $490W72 = $1450W90 = $1760W99 = $2020W126 = $2380W153 = $2740G18 = $520G36 = $660M90, M99 = $620M126, M153 = $780
Polished finish: $200 (Column,Foot or all)
All electrical accessories arespecified separately. Refer toAccessories for electricalcomponents pricing.
Islands Collection by Knoll®
81
MX Base Tables - Conference29� High, Horizontal or Vertical GrainRound Rectilinear, Single-Piece Top
description d w h pattern no. L V1 V2 V3
Round Rectilinear29� High
48� 96� 29� ILTRR(S/B/T)M96484(H/V)N( )( )( )( ) $2,862. $2,910. $3,104. $3,880.108� 29� ILTRR(S/B/T)M108484(H/V)N( )( )( )( ) 2,921. 2,966. 3,149. 4,883.120� 29� ILTRR(S/B/T)M120484(H/V)N( )( )( )( ) 3,011. 3,058. 3,246. 5,034.
54� 96� 29� ILTRR(S/B/T)M96544(H/V)N( )( )( )( ) 2,950. 3,000. 3,200. 4,550.108� 29� ILTRR(S/B/T)M108544(H/V)N( )( )( )( ) 3,011. 3,058. 3,246. 5,034.120� 29� ILTRR(S/B/T)M120544(H/V)N( )( )( )( ) 3,104. 3,153. 3,347. 5,190.
60� 108� 29� ILTRR(S/B/T)M108604(H/V)N( )( )( )( ) 3,104. 3,153. 3,347. 5,190.120� 29� ILTRR(S/B/T)M120604(H/V)N( )( )( )( ) 3,200. 3,250. 3,450. 5,350.
Order Code
Example: ILTRRSM96544H
IL Islands Collection byKnoll�
T TableRR Round RectilinearS Edge (S/B/T)M Base MX96 Width54 Depth4 29� HighH Horizontal Grain
DirectionN Grommet option( ) Grommet finish(114) Worksurface finish(114) Edge finish(114) Column finish(114) Foot finish
Specification Information
To order please specify patternnumber including:1. Grommet option:
N = None (no grommet)D = Narrow slot (length)P = Power Center with lid(length)G = Power Center no lidW = Wide Cannel with lid set(length) - comes with pre-definedset of lidsM = Wide Channel no lids(length)S = Power SquareGrommet options depend upontable top width:96�W options: N, D12 (2locations), D45 (centered), P9 &G9 (2 locations), W45 & M45(centered), S (2 locations)108�W options: N, D12 (2locations), D54 (centered), P9 &G9 (2 locations), W54 & M54(centered), S (2 locations)120�W options: N, D18 (2locations), D72 (centered), P18& G18 (2 locations), W72 & M72(centered), S (2 locations)
2. Grommet finish:N = Not applicableD: B=Black, W=White (texturedpaint)P: Painted / texturedG: Painted / texturedW: Painted / texturedS = 111, 114, 115, 118
3. Worksurface finish:L, V1, V2, V3
4. Edge finish:Complementary synthetic
5. Column finish:Painted/texturedPolished aluminum
6. Foot finishPainted/texturedPolished aluminum
All Worksurfaces are 1 1/4� thick .
Edges:S = Square EdgeB = Thin beveled edge four sidesT = Thick beveled edge four sides
Grain Direction:H = HorizontalV = Vertical
Height 29� is to top of worksurface.
Application Notes
The following upcharges apply:
Beveled Edge (B & T): $800Grommets: D18 = $200D45, D54, D72, M45, M54, M72 =$360P9 & G9 = $260P18 = $340P36 = $490W45 = $880W54 = $1140
Polished finish: $200 (Column,Foot or all)
All electrical accessories arespecified separately.
Edges:B= Thin beveled edge four sidesT= Thick beveled edge four sides
Islands Collection by Knoll®
82
MX Base Tables - Conference29� High, Horizontal or Vertical GrainRound Rectilinear, Multi-Piece Top
description d w h pattern no. L V1 V2 V3
Round Rectilinear29� High
48� 132� 29� ILTRR(S/B/T)M132484(H/V)N( )( )( )( ) $3,622. $3,670. $3,952. $6,022.144� 29� ILTRR(S/B/T)M144484(H/V)N( )( )( )( ) 3,731. 3,780. 4,070. 6,202.156� 29� ILTRR(S/B/T)M156484(H/V)N( )( )( )( ) 3,843. 3,893. 4,192. 6,388.180� 29� ILTRR(S/B/T)M180484(H/V)N( )( )( )( ) 5,020. 5,111. 5,385. 8,488.216� 29� ILTRR(S/B/T)M216484(H/V)N( )( )( )( ) 5,175. 5,269. 5,551. 8,750.
54� 132� 29� ILTRR(S/B/T)M132544(H/V)N( )( )( )( ) 3,735. 3,783. 4,074. 6,202.144� 29� ILTRR(S/B/T)M144544(H/V)N( )( )( )( ) 3,847. 3,896. 4,196. 6,394.156� 29� ILTRR(S/B/T)M156544(H/V)N( )( )( )( ) 3,962. 4,013. 4,322. 6,586.180� 29� ILTRR(S/B/T)M180544(H/V)N( )( )( )( ) 5,175. 5,269. 5,551. 8,750.216� 29� ILTRR(S/B/T)M216544(H/V)N( )( )( )( ) 5,335. 5,432. 5,723. 9,021.
60� 132� 29� ILTRR(S/B/T)M132604(H/V)N( )( )( )( ) 3,850. 3,900. 4,200. 6,400.144� 29� ILTRR(S/B/T)M144604(H/V)N( )( )( )( ) 3,966. 4,017. 4,326. 6,592.156� 29� ILTRR(S/B/T)M156604(H/V)N( )( )( )( ) 4,084. 4,138. 4,456. 6,790.180� 29� ILTRR(S/B/T)M180604(H/V)N( )( )( )( ) 5,335. 5,432. 5,723. 9,021.216� 29� ILTRR(S/B/T)M216604(H/V)N( )( )( )( ) 5,500. 5,600. 5,551. 8,750.
Order Code
Example: ILTRRSM132484H
IL Islands Collection byKnoll�
T TableRR Round RectilinearS Edge (S/B/T)M Base MX132 Width48 Depth4 29� HighH Horizontal Grain
DirectionN Grommet option( ) Grommet finish(114) Worksurface finish(114) Edge finish(114) Column finish(114) Foot finish
Specification Information
To order please specify patternnumber including:1. Grommet option:
N = None (no grommet)D = Narrow slot (length)P = Power Center with lid(length)G = Power Center no lidW = Wide Cannel with lid set(length) - comes with pre-definedset of lidsM = Wide Channel no lids(length)S = Power SquareGrommet options depend upontable top width:132�W options: N, D18 (2locations), D72 (centered), P18& G18 (2 locations), W72 & M72(centered), S (2 locations)144�W options: N, D30 (2locations), D90 (centered), P36& G36 (2 locations), W90 & M90(centered), S (2 locations)156�W options: N, D30 (2locations), D99 (centered), P36& G36 (2 locations), W99 & M99(centered), S (3 locations)180�W options: N, D45 (2locations), D126 (centered), P36& G36 (centered), S (4 locations)216�W options: N, D54 (2locations), D153 (centered), P36& G36 (2 locations), W153 &M153 (centered), S (4 locations)
2. Grommet finish:N = Not applicableD: B=Black, W=White (texturedpaint)P: Painted / texturedG: Painted / texturedW: Painted / texturedS = 111, 114, 115, 118
3. Worksurface finish:L, V1, V2, V3
4. Edge finish:Complementary synthetic
5. Column finish:Painted/texturedPolished aluminum
6. Foot finishPainted/texturedPolished aluminum
All Worksurfaces are 1 1/4� thick. Height29� is to top of worksurface .
Edges:S = Square EdgeB = Thin beveled edge four sidesT = Thick beveled edge four sides
Grain Direction:H = HorizontalV = Vertical
Application Notes
The following upcharges apply:
Beveled Edge (B & T): $1600Grommets: D18 = $200D30 = $240D45, D54 = $720D72, M72 = $360D90, D99 = $600D126, D153 = $750P18 = $340P36 = $490W72 = $1450W90 = $1760W99 = $2020W126 = $2380W153 = $2740G18 = $520G36 = $660M90, M99 = $620M126, M153 = $780
Polished finish: $200 (Column,Foot or all)
All electrical accessories arespecified separately. Refer toAccessories for electricalcomponents pricing.
Islands Collection by Knoll®
83
MX Base Tables - Conference29� High, Horizontal or Vertical GrainSoft Rectilinear, Single-Piece Top
description d w h pattern no. L V1 V2 V3
Soft Rectilinear29� High
48� 96� 29� ILTSR(S/B/T)M96484(H/V)N( )( )( )( ) $2,862. $2,910. $3,104. $3,880.108� 29� ILTSR(S/B/T)M108484(H/V)N( )( )( )( ) 2,921. 2,966. 3,149. 4,883.120� 29� ILTSR(S/B/T)M120484(H/V)N( )( )( )( ) 3,011. 3,058. 3,246. 5,034.
54� 96� 29� ILTSR(S/B/T)M96544(H/V)N( )( )( )( ) 2,950. 3,000. 3,200. 4,550.108� 29� ILTSR(S/B/T)M108544(H/V)N( )( )( )( ) 3,011. 3,058. 3,246. 5,034.120� 29� ILTSR(S/B/T)M120544(H/V)N( )( )( )( ) 3,104. 3,153. 3,347. 5,190.
60� 108� 29� ILTSR(S/B/T)M108604(H/V)N( )( )( )( ) 3,104. 3,153. 3,347. 5,190.120� 29� ILTSR(S/B/T)M120604(H/V)N( )( )( )( ) 3,200. 3,250. 3,450. 5,350.
Order Code
Example: ILTSRSM96544H
IL Islands Collection byKnoll�
T TableSR Soft RectilinearS Edge (S/B/T)M Base MX96 Width54 Depth4 29� HighH Horizontal Grain
DirectionN Grommet option( ) Grommet finish(114) Worksurface finish(114) Edge finish(114) Column finish(114) Foot finish
Specification Information
To order please specify patternnumber including:1. Grommet option:
N = None (no grommet)D = Narrow slot (length)P = Power Center with lid(length)G = Power Center no lidW = Wide Cannel with lid set(length) - comes with pre-definedset of lidsM = Wide Channel no lids(length)S = Power SquareGrommet options depend upontable top width:96�W options: N, D12 (2locations), D45 (centered), P9 &G9 (2 locations), W45 & M45(centered), S (2 locations)108�W options: N, D12 (2locations), D54 (centered), P9 &G9 (2 locations), W54 & M54(centered), S (2 locations)120�W options: N, D18 (2locations), D72 (centered), P18& G18 (2 locations), W72 & M72(centered), S (2 locations)
2. Grommet finish:N = Not applicableD: B=Black, W=White (texturedpaint)P: Painted / texturedG: Painted / texturedW: Painted / texturedS = 111, 114, 115, 118
3. Worksurface finish:L, V1, V2, V3
4. Edge finish:Complementary synthetic
5. Column finish:Painted/texturedPolished aluminum
6. Foot finishPainted/texturedPolished aluminum
All Worksurfaces are 1 1/4� thick .
Edges:S = Square EdgeB = Thin beveled edge four sidesT = Thick beveled edge four sides
Grain Direction:H = HorizontalV = Vertical
Height 29� is to top of worksurface.
Application Notes
The following upcharges apply:
Beveled Edge (B & T): $800Grommets: D18 = $200D45, D54, D72, M45, M54, M72 =$360P9 & G9 = $260P18 = $340P36 = $490W45 = $880W54 = $1140
Polished finish: $200 (Column,Foot or all)
All electrical accessories arespecified separately.
Edges:B= Thin beveled edge four sidesT= Thick beveled edge four sides
Islands Collection by Knoll®
84
MX Base Tables - Conference29� High, Horizontal or Vertical GrainSoft Rectilinear, Multi-Piece Top
description d w h pattern no. L V1 V2 V3
Soft Rectilinear29� High
48� 132� 29� ILTSR(S/B/T)M132484(H/V)N( )( )( )( ) $3,905. $3,952. $4,234. $6,210.144� 29� ILTSR(S/B/T)M144484(H/V)N( )( )( )( ) 4,022. 4,070. 4,361. 6,396.156� 29� ILTSR(S/B/T)M156484(H/V)N( )( )( )( ) 4,143. 4,192. 4,492. 6,588.180� 29� ILTSR(S/B/T)M180484(H/V)N( )( )( )( ) 5,294. 5,339. 5,704. 8,807.216� 29� ILTSR(S/B/T)M216484(H/V)N( )( )( )( ) 5,457. 5,504. 5,881. 9,080.
54� 132� 29� ILTSR(S/B/T)M132544(H/V)N( )( )( )( ) 4,026. 4,074. 4,365. 6,402.144� 29� ILTSR(S/B/T)M144544(H/V)N( )( )( )( ) 4,146. 4,196. 4,496. 6,594.156� 29� ILTSR(S/B/T)M156544(H/V)N( )( )( )( ) 4,271. 4,322. 4,631. 6,792.180� 29� ILTSR(S/B/T)M180544(H/V)N( )( )( )( ) 5,457. 5,504. 5,881. 9,080.216� 29� ILTSR(S/B/T)M216544(H/V)N( )( )( )( ) 5,626. 5,675. 6,063. 9,361.
60� 132� 29� ILTSR(S/B/T)M132604(H/V)N( )( )( )( ) 4,150. 4,200. 4,500. 6,600.144� 29� ILTSR(S/B/T)M144604(H/V)N( )( )( )( ) 4,275. 4,326. 4,635. 6,798.156� 29� ILTSR(S/B/T)M156604(H/V)N( )( )( )( ) 4,403. 4,456. 4,774. 7,002.180� 29� ILTSR(S/B/T)M180604(H/V)N( )( )( )( ) 5,626. 5,675. 6,063. 9,361.216� 29� ILTSR(S/B/T)M216604(H/V)N( )( )( )( ) 5,800. 5,850. 6,250. 9,650.
Order Code
Example: ILTSRSM132484H
IL Islands Collection byKnoll�
T TableSR Soft RectilinearS Edge (S/B/T)M Base MX132 Width48 Depth4 29� HighH Horizontal Grain
DirectionN Grommet option( ) Grommet finish(114) Worksurface finish(114) Edge finish(114) Column finish(114) Foot finish
Specification Information
To order please specify patternnumber including:1. Grommet option:
N = None (no grommet)D = Narrow slot (length)P = Power Center with lid(length)G = Power Center no lidW = Wide Cannel with lid set(length) - comes with pre-definedset of lidsM = Wide Channel no lids(length)S = Power SquareGrommet options depend upontable top width:132�W options: N, D18 (2locations), D72 (centered), P18& G18 (2 locations), W72 & M72(centered), S (2 locations)144�W options: N, D30 (2locations), D90 (centered), P36& G36 (2 locations), W90 & M90(centered), S (2 locations)156�W options: N, D30 (2locations), D99 (centered), P36& G36 (2 locations), W99 & M99(centered), S (3 locations)180�W options: N, D45 (2locations), D126 (centered), P36& G36 (centered), S (4 locations)216�W options: N, D54 (2locations), D153 (centered), P36& G36 (2 locations), W153 &M153 (centered), S (4 locations)
2. Grommet finish:N = Not applicableD: B=Black, W=White (texturedpaint)P: Painted / texturedG: Painted / texturedW: Painted / texturedS = 111, 114, 115, 118
3. Worksurface finish:L, V1, V2, V3
4. Edge finish:Complementary synthetic
5. Column finish:Painted/texturedPolished aluminum
6. Foot finishPainted/texturedPolished aluminum
All Worksurfaces are 1 1/4� thick. Height29� is to top of worksurface .
Edges:S = Square EdgeB = Thin beveled edge four sidesT = Thick beveled edge four sides
Grain Direction:H = HorizontalV = Vertical
Application Notes
The following upcharges apply:
Beveled Edge (B & T): $1600Grommets: D18 = $200D30 = $240D45, D54 = $720D72, M72 = $360D90, D99 = $600D126, D153 = $750P18 = $340P36 = $490W72 = $1450W90 = $1760W99 = $2020W126 = $2380W153 = $2740G18 = $520G36 = $660M90, M99 = $620M126, M153 = $780
Polished finish: $200 (Column,Foot or all)
All electrical accessories arespecified separately. Refer toAccessories for electricalcomponents pricing.
Islands Collection by Knoll®
85
MX Base Tables - Conference29� High, Horizontal or Vertical GrainElongated Hexagon, Single-Piece Top
description d w h pattern no. L V1 V2 V3
Elongated Hexagon29� High
48� 96� 29� ILTEH(S/B/T)M96484(H/V)N( )( )( )( ) $2,862. $2,910. $3,104. $3,880.108� 29� ILTEH(S/B/T)M108484(H/V)N( )( )( )( ) 2,921. 2,966. 3,149. 4,883.120� 29� ILTEH(S/B/T)M120484(H/V)N( )( )( )( ) 3,011. 3,058. 3,246. 5,034.
54� 96� 29� ILTEH(S/B/T)M96544(H/V)N( )( )( )( ) 2,950. 3,000. 3,200. 4,550.108� 29� ILTEH(S/B/T)M108544(H/V)N( )( )( )( ) 3,011. 3,058. 3,246. 5,034.120� 29� ILTEH(S/B/T)M120544(H/V)N( )( )( )( ) 3,104. 3,153. 3,347. 5,190.
60� 108� 29� ILTEH(S/B/T)M108604(H/V)N( )( )( )( ) 3,104. 3,153. 3,347. 5,190.120� 29� ILTEH(S/B/T)M120604(H/V)N( )( )( )( ) 3,200. 3,250. 3,450. 5,350.
Order Code
Example: ILTEHSM96544H
IL Islands Collection byKnoll�
T TableEH Elongated HexagonS Edge (S/B/T)M Base MX96 Width54 Depth4 29� HighH Horizontal Grain
DirectionN Grommet option( ) Grommet finish(114) Worksurface finish(114) Edge finish(114) Column finish(114) Foot finish
Specification Information
To order please specify patternnumber including:1. Grommet option:
N = None (no grommet)D = Narrow slot (length)P = Power Center with lid(length)G = Power Center no lidW = Wide Cannel with lid set(length) - comes with pre-definedset of lidsM = Wide Channel no lids(length)S = Power SquareGrommet options depend upontable top width:96�W options: N, D12 (2locations), D45 (centered), P9 &G9 (2 locations), W45 & M45(centered), S (2 locations)108�W options: N, D12 (2locations), D54 (centered), P9 &G9 (2 locations), W54 & M54(centered), S (2 locations)120�W options: N, D18 (2locations), D72 (centered), P18& G18 (2 locations), W72 & M72(centered), S (2 locations)
2. Grommet finish:N = Not applicableD: B=Black, W=White (texturedpaint)P: Painted / texturedG: Painted / texturedW: Painted / texturedS = 111, 114, 115, 118
3. Worksurface finish:L, V1, V2, V3
4. Edge finish:Complementary synthetic
5. Column finish:Painted/texturedPolished aluminum
6. Foot finishPainted/texturedPolished aluminum
All Worksurfaces are 1 1/4� thick .
Edges:S = Square EdgeB = Thin beveled edge four sidesT = Thick beveled edge four sides
Grain Direction:H = HorizontalV = Vertical
Height 29� is to top of worksurface.
Application Notes
The following upcharges apply:
Beveled Edge (B & T): $800Grommets: D18 = $200;D45, D54, D72, M45, M54, M72 =$360P9 & G9 = $260P18 = $340;P36 = $490W45 = $880W54 = $1140
Polished finish: $200 (Column,Foot or all)
All electrical accessories arespecified separately.
Edges:B= Thin beveled edge four sidesT= Thick beveled edge four sides
Islands Collection by Knoll®
86
MX Base Tables - Conference29� High, Horizontal or Vertical GrainElongated Hexagon, Multi-Piece Top
description d w h pattern no. L V1 V2 V3
Elongated Hexagon29� High
48� 132� 29� ILTEH(S/B/T)M132484(H/V)N( )( )( )( ) $3,622. $3,670. $3,952. $6,022.144� 29� ILTEH(S/B/T)M144484(H/V)N( )( )( )( ) 3,731. 3,780. 4,070. 6,202.156� 29� ILTEH(S/B/T)M156484(H/V)N( )( )( )( ) 3,843. 3,893. 4,192. 6,388.180� 29� ILTEH(S/B/T)M180484(H/V)N( )( )( )( ) 5,020. 5,111. 5,385. 8,488.216� 29� ILTEH(S/B/T)M216484(H/V)N( )( )( )( ) 5,175. 5,269. 5,551. 8,750.
54� 132� 29� ILTEH(S/B/T)M132544(H/V)N( )( )( )( ) 3,735. 3,783. 4,074. 6,202.144� 29� ILTEH(S/B/T)M144544(H/V)N( )( )( )( ) 6,847. 3,896. 4,196. 6,394.156� 29� ILTEH(S/B/T)M156544(H/V)N( )( )( )( ) 3,962. 4,013. 4,322. 6,586.180� 29� ILTEH(S/B/T)M180544(H/V)N( )( )( )( ) 5,175. 5,269. 5,551. 8,750.216� 29� ILTEH(S/B/T)M216544(H/V)N( )( )( )( ) 5,335. 5,432. 5,723. 9,021.
60� 132� 29� ILTEH(S/B/T)M132604(H/V)N( )( )( )( ) 3,850. 3,900. 4,200. 6,400.144� 29� ILTEH(S/B/T)M144604(H/V)N( )( )( )( ) 3,966. 4,017. 4,326. 6,592.156� 29� ILTEH(S/B/T)M156604(H/V)N( )( )( )( ) 4,084. 4,138. 4,456. 6,790.180� 29� ILTEH(S/B/T)M180604(H/V)N( )( )( )( ) 5,335. 5,432. 5,723. 9,021.216� 29� ILTEH(S/B/T)M216604(H/V)N( )( )( )( ) 5,500. 5,600. 5,551. 8,750.
Order Code
Example: ILTEHSM132484H
IL Islands Collection byKnoll�
T TableEH Elongated HexagonS Edge (S/B/T)M Base MX132 Width48 Depth4 29� HighH Horizontal Grain
DirectionN Grommet option( ) Grommet finish(114) Worksurface finish(114) Edge finish(114) Column finish(114) Foot finish
Specification Information
To order please specify patternnumber including:1. Grommet option:
N = None (no grommet)D = Narrow slot (length)P = Power Center with lid(length)G = Power Center no lidW = Wide Cannel with lid set(length) - comes with pre-definedset of lidsM = Wide Channel no lids(length)S = Power SquareGrommet options depend upontable top width:132�W options: N, D18 (2locations), D72 (centered), P18& G18 (2 locations), W72 & M72(centered), S (2 locations)144�W options: N, D30 (2locations), D90 (centered), P36& G36 (2 locations), W90 & M90(centered), S (2 locations)156�W options: N, D30 (2locations), D99 (centered), P36& G36 (2 locations), W99 & M99(centered), S (3 locations)180�W options: N, D45 (2locations), D126 (centered), P36& G36 (centered), S (4 locations)216�W options: N, D54 (2locations), D153 (centered), P36& G36 (2 locations), W153 &M153 (centered), S (4 locations)
2. Grommet finish:N = Not applicableD: B=Black, W=White (texturedpaint)P: Painted / texturedG: Painted / texturedW: Painted / texturedS = 111, 114, 115, 118
3. Worksurface finish:L, V1, V2, V3
4. Edge finish:Complementary synthetic
5. Column finish:Painted/texturedPolished aluminum
6. Foot finishPainted/texturedPolished aluminum
All Worksurfaces are 1 1/4� thick. Height29� is to top of worksurface .
Edges:S = Square EdgeB = Thin beveled edge four sidesT = Thick beveled edge four sides
Grain Direction:H = HorizontalV = Vertical
Application Notes
The following upcharges apply:
Beveled Edge (B & T): $1600Grommets: D18 = $200D30 = $240D45, D54 = $720D72, M72 = $360D90, D99 = $600D126, D153 = $750P18 = $340P36 = $490W72 = $1450W90 = $1760W99 = $2020W126 = $2380W153 = $2740G18 = $520G36 = $660M90, M99 = $620M126, M153 = $780
Polished finish: $200 (Column,Foot or all)
All electrical accessories arespecified separately. Refer toAccessories for electricalcomponents pricing.
Islands Collection by Knoll®
87
MX Base Tables - Conference29� High, Horizontal or Vertical GrainCairo Shaped Tables, Single-Piece Top
description d w h pattern no. L V1 V2 V3
Cairo Shaped Table29� High
48� 96� 29� ILTCY(S/B/T)M96484(H/V)N( )( )( )( ) $2,862. $2,910. $3,104. $3,880.108� 29� ILTCY(S/B/T)M108484(H/V)N( )( )( )( ) 2,921. 2,966. 3,149. 4,883.120� 29� ILTCY(S/B/T)M120484(H/V)N( )( )( )( ) 3,011. 3,058. 3,246. 5,034.
54� 96� 29� ILTCY(S/B/T)M96544(H/V)N( )( )( )( ) 2,950. 3,000. 3,200. 4,550.108� 29� ILTCY(S/B/T)M108544(H/V)N( )( )( )( ) 3,011. 3,058. 3,246. 5,034.120� 29� ILTCY(S/B/T)M120544(H/V)N( )( )( )( ) 3,104. 3,153. 3,347. 5,190.
60� 108� 29� ILTCY(S/B/T)M108604(H/V)N( )( )( )( ) 3,104. 3,153. 3,347. 5,190.120� 29� ILTCY(S/B/T)M120604(H/V)N( )( )( )( ) 3,200. 3,250. 3,450. 5,350.
Order Code
Example: ILTCYSM96544H
IL Islands Collection byKnoll�
T TableCY Cairo Shaped TableS Edge (S/B/T)M Base MX96 Width54 Depth4 29� HighH Horizontal Grain
DirectionN Grommet option( ) Grommet finish(114) Worksurface finish(114) Edge finish(114) Column finish(114) Foot finish
Specification Information
To order please specify patternnumber including:1. Grommet option:
N = None (no grommet)D = Narrow slot (length)P = Power Center with lid(length)G = Power Center no lidW = Wide Cannel with lid set(length) - comes with pre-definedset of lidsM = Wide Channel no lids(length)S = Power SquareGrommet options depend upontable top width:96�W options: N, D12 (2locations), D45 (centered), P9 &G9 (2 locations), W45 & M45(centered), S (2 locations)108�W options: N, D12 (2locations), D54 (centered), P9 &G9 (2 locations), W54 & M54(centered), S (2 locations)120�W options: N, D18 (2locations), D72 (centered), P18& G18 (2 locations), W72 & M72(centered), S (2 locations)
2. Grommet finish:N = Not applicableD: B=Black, W=White (texturedpaint)P: Painted / texturedG: Painted / texturedW: Painted / texturedS = 111, 114, 115, 118
3. Worksurface finish:L, V1, V2, V3
4. Edge finish:Complementary synthetic
5. Column finish:Painted/texturedPolished aluminum
6. Foot finishPainted/texturedPolished aluminum
All Worksurfaces are 1 1/4� thick .
Edges:S = Square EdgeB = Thin beveled edge four sidesT = Thick beveled edge four sides
Grain Direction:H = HorizontalV = Vertical
Height 29� is to top of worksurface.
Application Notes
The following upcharges apply:
Beveled Edge (B & T): $800Grommets: D18 = $200D45, D54, D72, M45, M54, M72 =$360P9 & G9 = $260P18 = $340P36 = $490W45 = $880W54 = $1140
Polished finish: $200 (Column,Foot or all)
All electrical accessories arespecified separately.
Edges:B= Thin beveled edge four sidesT= Thick beveled edge four sides
Islands Collection by Knoll®
88
MX Base Tables - Conference29� High, Horizontal or Vertical GrainCairo Shaped Tables, Multi-Piece Top
description d w h pattern no. L V1 V2 V3
Cairo Shaped Table29� High
48� 132� 29� ILTCY(S/B/T)M132484(H/V)N( )( )( )( ) $3,622. $3,670. $3,952. $6,022.144� 29� ILTCY(S/B/T)M144484(H/V)N( )( )( )( ) 3,731. 3,780. 4,070. 6,202.156� 29� ILTCY(S/B/T)M156484(H/V)N( )( )( )( ) 3,843. 3,893. 4,192. 6,388.180� 29� ILTCY(S/B/T)M180484(H/V)N( )( )( )( ) 5,020. 5,111. 5,385. 8,488.216� 29� ILTCY(S/B/T)M216484(H/V)N( )( )( )( ) 5,175. 5,269. 5,551. 8,750.
54� 132� 29� ILTCY(S/B/T)M132544(H/V)N( )( )( )( ) 3,735. 3,783. 4,074. 6,202.144� 29� ILTCY(S/B/T)M144544(H/V)N( )( )( )( ) 3,847. 3,896. 4,196. 6,394.156� 29� ILTCY(S/B/T)M156544(H/V)N( )( )( )( ) 3,962. 4,013. 4,322. 6,586.180� 29� ILTCY(S/B/T)M180544(H/V)N( )( )( )( ) 5,175. 5,269. 5,551. 8,750.216� 29� ILTCY(S/B/T)M216544(H/V)N( )( )( )( ) 5,335. 5,432. 5,723. 9,021.
60� 132� 29� ILTCY(S/B/T)M132604(H/V)N( )( )( )( ) 3,850. 3,900. 4,200. 6,400.144� 29� ILTCY(S/B/T)M144604(H/V)N( )( )( )( ) 3,966. 4,017. 4,326. 6,592.156� 29� ILTCY(S/B/T)M156604(H/V)N( )( )( )( ) 4,084. 4,138. 4,456. 6,790.180� 29� ILTCY(S/B/T)M180604(H/V)N( )( )( )( ) 5,335. 5,432. 5,723. 9,021.216� 29� ILTCY(S/B/T)M216604(H/V)N( )( )( )( ) 5,500. 5,600. 5,551. 8,750.
Order Code
Example: ILTCYSM132484H
IL Islands Collection byKnoll�
T TableRC Cairo Shaped TablesS Edge (S/B/T)M Base MX132 Width48 Depth4 29� HighH Horizontal Grain
DirectionN Grommet option( ) Grommet finish(114) Worksurface finish(114) Edge finish(114) Column finish(114) Foot finish
Specification Information
To order please specify patternnumber including:1. Grommet option:
N = None (no grommet)D = Narrow slot (length)P = Power Center with lid(length)G = Power Center no lidW = Wide Cannel with lid set(length) - comes with pre-definedset of lidsM = Wide Channel no lids(length)S = Power SquareGrommet options depend upontable top width:132�W options: N, D18 (2locations), D72 (centered), P18& G18 (2 locations), W72 & M72(centered), S (2 locations)144�W options: N, D30 (2locations), D90 (centered), P36& G36 (2 locations), W90 & M90(centered), S (2 locations)156�W options: N, D30 (2locations), D99 (centered), P36& G36 (2 locations), W99 & M99(centered), S (3 locations)180�W options: N, D45 (2locations), D126 (centered), P36& G36 (centered), S (4 locations)216�W options: N, D54 (2locations), D153 (centered), P36& G36 (2 locations), W153 &M153 (centered), S (4 locations)
2. Grommet finish:N = Not applicableD: B=Black, W=White (texturedpaint)P: Painted / texturedG: Painted / texturedW: Painted / texturedS = 111, 114, 115, 118
3. Worksurface finish:L, V1, V2, V3
4. Edge finish:Complementary synthetic
5. Column finish:Painted/texturedPolished aluminum
6. Foot finishPainted/texturedPolished aluminum
All Worksurfaces are 1 1/4� thick. Height29� is to top of worksurface .
Edges:S = Square EdgeB = Thin beveled edge four sidesT = Thick beveled edge four sides
Grain Direction:H = HorizontalV = Vertical
Application Notes
The following upcharges apply:
Beveled Edge (B & T): $1600Grommets: D18 = $200D30 = $240D45, D54 = $720D72, M72 = $360D90, D99 = $600D126, D153 = $750P18 = $340P36 = $490W72 = $1450W90 = $1760W99 = $2020W126 = $2380W153 = $2740G18 = $520G36 = $660M90, M99 = $620M126, M153 = $780
Polished finish: $200 (Column,Foot or all)
All electrical accessories arespecified separately. Refer toAccessories for electricalcomponents pricing.
Islands Collection by Knoll®
89
Electrical Units - Drop-inDesktop Outlets
description type pattern no. list
Electrical Outlet for Tables Drop-in110, 1 power + 1 dual USB + 0 data
72� cordset ILED11072(BB/WW) $315.120� cordset ILED110120(BB/WW) 327.12� linkable ILED110L(BB/WW) 345.72� hardwired ILED110H(BB/WW) 363.
Electrical Outlet for Tables Drop-in202, 2 power + 0 dual USB + 2 data
72� cordset ILED20272(BB/WW) 278.120� cordset ILED202120(BB/WW) 290.12� linkable ILED202L(BB/WW) 309.72� hardwired ILED202H(BB/WW) 329.
Electrical Outlet for Tables Drop-in210, 2 power + 1 dual USB + 0 data
72� cordset ILED21072(BB/WW) 337.120� cordset ILED210120(BB/WW) 347.12� linkable ILED210L(BB/WW) 359.72� hardwired ILED210H(BB/WW) 372.
Electrical Outlet for Tables Drop-in311, 3 power + 1 dual USB + 1 data
72� cordset ILED31172(BB/WW) 396.120� cordset ILED311120(BB/WW) 408.12� linkable ILED311L(BB/WW) 428.72� hardwired ILED311H(BB/WW) 447.
Order Code
Example: ILED11072BB
IL Islands Collection byKnoll�
E Electrical AccessoriesD Drop-in Desktop Outlet110 1 Power, 1 dual USB, 0
Data72 72� Cordset
120=120� cordsetL = LinkableH = Hardwired
BB Color option
Specification Information
To order please specify patternnumber including:1. Color option, (housing/bracket):
BB = Black / BlackWW = White / White
Application Notes
Installation instructions availableon Knoll.com+.
Refer to planning guide pages forcomplete description.
USB / USB-C outlets are forrecharging purposes only. No datatransfer. All desktop outlets are ULlisted.
Simplex receptacles and USBcharging ports are wired together onthe same circuit.
Units with data ports come withTech Adapters.Connectors and jacks are notincluded are available from thirdparty vendors. Refer to ‘‘TechAdapter Master List’’ for compatiblejacks and connectors.
Islands Collection by Knoll®
90
Electrical Units - Drop-inDesktop Outlets
description type pattern no. list
Electrical Outlet for Tables Drop-in21C, 2 power + 1 dual USB + 1 USB-C
72� cordset ILED21C72(BB/WW) $562.120� cordset ILED21C120(BB/WW) 582.12� linkable ILED21CL(BB/WW) 603.72� hardwired ILED21CH(BB/WW) 621.
Electrical Outlet for Tables Drop-in412, 4 power + 1 dual USB + 2 data
72� cordset ILED41272(BB/WW) 416.120� cordset ILED412120(BB/WW) 427.12� linkable ILED412L(BB/WW) 446.72� hardwired ILED412H(BB/WW) 465.
Order Code
Example: ILED11072BB
IL Islands Collection byKnoll�
E Electrical AccessoriesD Drop-in Desktop Outlet110 1 Power, 1 dual USB, 0
Data72 72� Cordset
120=120� cordsetL = LinkableH = Hardwired
BB Color option
Specification Information
To order please specify patternnumber including:1. Color option, (housing/bracket):
BB = Black / BlackWW = White / White
Application Notes
Installation instructions availableon Knoll.com+.
Refer to planning guide pages forcomplete description.
USB / USB-C outlets are forrecharging purposes only. No datatransfer. All desktop outlets are ULlisted.
Simplex receptacles and USBcharging ports are wired together onthe same circuit.
Units with data ports come withTech Adapters.Connectors and jacks are notincluded are available from thirdparty vendors. Refer to ‘‘TechAdapter Master List’’ for compatiblejacks and connectors.
Islands Collection by Knoll®
91
Electrical Units - Drop-inInfeeds and Jumper CablesLinkable Power Outlets
description type d w pattern no. list
Infeeds for Linkable Drop-in Outlets infeed cable, 60� cord 3� 79.5� ILEI60 $480.infeed cable, 120� cord 3� 139.5� ILEI120 499.
Jumpers for Linkable Drop-in Outlets jumper cable, 24� 2� 24� ILEJ24 95.jumper cable, 30� 2� 30� ILEJ30 97.jumper cable, 36� 2� 36� ILEJ36 99.jumper cable, 42� 2� 42� ILEJ42 101.jumper cable, 48� 2� 48� ILEJ48 104.jumper cable, 54� 2� 54� ILEJ54 107.jumper cable, 60� 2� 60� ILEJ60 110.jumper cable, 66� 2� 66� ILEJ66 113.jumper cable, 72� 2� 72� ILEJ72 116.jumper cable, 78� 2� 78� ILEJ78 122.jumper cable, 84� 2� 84� ILEJ84 125.jumper cable, 90� 2� 90� ILEJ90 129.jumper cable, 96� 2� 96� ILEJ96 132.jumper cable, 102� 2� 102� ILEJ102 136.jumper cable, 108� 2� 108� ILEJ108 139.jumper cable, 114� 2� 114� ILEJ114 142.jumper cable, 120� 2� 120� ILEJ120 146.jumper cable, 126� 2� 126� ILEJ126 150.jumper cable, 132� 2� 132� ILEJ132 155.
Order Code
Example: ILEI60
IL Islands Collection byKnoll�
E Electrical AccessoriesI Power Infeed60 60� long
Specification Information
To order please specify patternnumber including:1. Pattern number:
Application Notes
Infeed Cables and Jumpers on thispage are for use with LinkableDesktop Electrical outlets.
Islands Collection by Knoll®
92
Electrical Units - Power SquareDesktop Outlets
description type d w pattern no. list
Power Square Outlet for Tables2 Outlets, 2 Blanks
cordset, 120� cord 3.375� 3.375� ILEPSPNPN(W/G/B)C $428.hardwire, 120� whip 3.375� 3.375� ILEPSPNPN(W/G/B)H 536.linkable, 60� link 3.375� 3.375� ILEPSPNPN(W/G/B)L 611.
Power Square Outlet for Tables3 Outlets, 1 Blanks
cordset, 120� cord 3.375� 3.375� ILEPSPPPN(W/G/B)C 536.hardwire, 120� whip 3.375� 3.375� ILEPSPPPN(W/G/B)H 643.linkable, 60� link 3.375� 3.375� ILEPSPPPN(W/G/B)L 718.
Power Square Outlet for Tables3 Outlets, 1 dual USB
cordset, 120� cord 3.375� 3.375� ILEPSPPPU(W/G/B)C 803.hardwire, 120� whip 3.375� 3.375� ILEPSPPPU(W/G/B)H 911.linkable, 60� link 3.375� 3.375� ILEPSPPPU(W/G/B)L 986.
Power Square Outlet for Tables2 Outlets, 2 dual USB
cordset, 120� cord 3.375� 3.375� ILEPSPUPU(W/G/B)C 964.hardwire, 120� whip 3.375� 3.375� ILEPSPUPU(W/G/B)H 1,071.linkable, 60� link 3.375� 3.375� ILEPSPUPU(W/G/B)L 1,146.
Power Square Outlet for Tables3 Outlets, 1 HDMI port
cordset, 120� cord 3.375� 3.375� ILEPSPPPH(W/G/B)C 835.hardwire, 120� whip 3.375� 3.375� ILEPSPPPH(W/G/B)H 942.linkable, 60� link 3.375� 3.375� ILEPSPPPH(W/G/B)L 1,018.
Order Code
Example: ILEPSPNPNWC
IL Islands Collection byKnoll�
E Electrical AccessoriesPS Power Square Desktop
OutletPNPN 2 Outlets, 2 BlanksW WhiteC Cordset
Specification Information
To order please specify patternnumber including:1. Color Code:
W = WhiteG = Medium GreyB = Black
Application Notes
Power Square application is usedwith type S grommet option onIslands Tables. Type S grommetcutout size is 3� square.
USB outlets are for rechargingpurposes only. No data transfer. Alldesktop outlets are UL listed.
Simplex receptacles and USBcharging ports are wired together onthe same circuit.
Linking power starter and linkingpower extenders required forlinkable power square option.
Refer to planning guide pages forcomplete description.
Installation instructions availableon Knoll.com+.
Islands Collection by Knoll®
93
Electrical Units - Power SquareDesktop Outlets
description type d w pattern no. list
Power Square Outlet for Tables2 Outlets, 1 HDMI port, 1 Ethernet port
cordset, 120� cord 3.375� 3.375� ILEPSPHPE(W/G/B)C $814.hardwire, 120� whip 3.375� 3.375� ILEPSPHPE(W/G/B)H 921.linkable, 60� link 3.375� 3.375� ILEPSPHPE(W/G/B)L 996.
Power Square Outlet for Tables2 Outlets, 1 dual USB, 1 HDMI port
cordset, 120� cord 3.375� 3.375� ILEPSPHPU(W/G/B)C 942.hardwire, 120� whip 3.375� 3.375� ILEPSPHPU(W/G/B)H 1,125.linkable, 60� link 3.375� 3.375� ILEPSPHPU(W/G/B)L 1,050.
Power Square Outlet for Tables2 Outlets, 1 dual USB, 1 Ethernet port
cordset, 120� cord 3.375� 3.375� ILEPSPEPU(W/G/B)C 942.hardwire, 120� whip 3.375� 3.375� ILEPSPEPU(W/G/B)H 1,125.linkable, 60� link 3.375� 3.375� ILEPSPEPU(W/G/B)L 1,050.
Order Code
Example: ILEPSPNPNWC
IL Islands Collection byKnoll�
E Electrical AccessoriesPS Power Square Desktop
OutletPNPN 2 Outlets, 2 BlanksW WhiteC Cordset
Specification Information
To order please specify patternnumber including:1. Color Code:
W = WhiteG = Medium GreyB = Black
Application Notes
Power Square application is usedwith type S grommet option onIslands Tables. Type S grommetcutout size is 3� square.
USB outlets are for rechargingpurposes only. No data transfer. Alldesktop outlets are UL listed.
Simplex receptacles and USBcharging ports are wired together onthe same circuit.
Linking power starter and linkingpower extenders required forlinkable power square option.
Refer to planning guide pages forcomplete description.
Installation instructions availableon Knoll.com+.
Islands Collection by Knoll®
94
Electrical Units - Power SquareLinking Power Extender and Power Starter
description type d w pattern no. list
Linking Power Extenderfor Power Square
linkable, 24� extender cable 24� ILEPLJ24 $129.
Linking Power Starterfor Power Square
cordset, 72�, cord 72� ILEPLS72 626.cordset, 120�, cord 120� ILEPLS120 643.
Order Code
Example: ILEPLJ24
IL Islands Collection byKnoll�
E Electrical AccessoriesPL Power Square LinkageJ Linking Power Extender24 24� long
Specification Information Application Notes
Power Starter and Power Extenderare used on linkable Islands powerSquare Outlets.
Refer to planning guide pages forcomplete description.
Installation instructions availableon Knoll.com+.
Islands Collection by Knoll®
95
Electrical Units - Clamp-OnElectrical Outlets
description type pattern no. list
Clamp-on Electric Outlet110, 1 Power + 1 USB
72� Cordset ILEC11072(WW/BB) $315.120� Cordset ILEC110120(WW/BB) 315.Hardwired ILEC110H(WW/BB) 315.
Clamp-on Electric Outlet202, 2 Power + 2 Data Ports
72� Cordset ILEC20272(WW/BB) 252.120� Cordset ILEC202120(WW/BB) 252.Hardwired ILEC202H(WW/BB) 252.Linkable ILEC202L(WW/BB) 252.
Clamp-on Electric Outlet210, 2 Power + 1 USB
72� Cordset ILEC21072(WW/BB) 315.120� Cordset ILEC210120(WW/BB) 315.Hardwired ILEC210H(WW/BB) 315.Linkable ILEC210L(WW/BB) 315.
Clamp-on Electric Outlet311, 3 Power + 1 USB + Data Port
72� Cordset ILEC31172(WW/BB) 373.120� Cordset ILEC311120(WW/BB) 373.Hardwired ILEC311H(WW/BB) 373.Linkable ILEC311L(WW/BB) 373.
Clamp-on Electric Outlet412, 4 Power + 1 USB + 2 Data Ports
72� Cordset ILEC41272(WW/BB) 467.120� Cordset ILEC412120(WW/BB) 467.Hardwired ILEC412H(WW/BB) 467.Linkable ILEC412L(WW/BB) 467.
Order Code
Example: ILEC11072BB
IL Islands Collection byKnoll�
E Electrical AccessoriesC Clamp On Electric
Outlet110 1 Power, 1 dual USB, 0
Data72 72� Cordset
120=120� cordsetL = LinkableH = Hardwired
BB Color option
Specification Information
To order please specify patternnumber including:1. Color option, (housing/bracket):
BB = Black / BlackWW = White / White
Application Notes
Installation instructions availableon Knoll.com+.
Refer to planning guide pages forcomplete description.
USB / USB-C outlets are forrecharging purposes only. No datatransfer. All desktop outlets are ULlisted.
Simplex receptacles and USBcharging ports are wired together onthe same circuit.
Units with data ports come withTech Adapters.Connectors and jacks are notincluded are available from thirdparty vendors. Refer to ‘‘TechAdapter Master List’’ for compatiblejacks and connectors.
Islands Collection by Knoll®
96
Electrical Units - Clamp-OnElectrical Outlets
description type pattern no. list
Clamp-on Electric Outlet21C, 2 Power + 1 USB + 1 USB C
72� Cordset ILEC21C72(WW/BB) $525.120� Cordset ILEC21C120(WW/BB) 525.Hardwired ILEC21CH(WW/BB) 525.Linkable ILEC21CL(WW/BB) 525.
Order Code
Example: ILEC11072BB
IL Islands Collection byKnoll�
E Electrical AccessoriesC Clamp On Electric
Outlet110 1 Power, 1 dual USB, 0
Data72 72� Cordset
120=120� cordsetL = LinkableH = Hardwired
BB Color option
Specification Information
To order please specify patternnumber including:1. Color option, (housing/bracket):
BB = Black / BlackWW = White / White
Application Notes
Installation instructions availableon Knoll.com+.
Refer to planning guide pages forcomplete description.
USB / USB-C outlets are forrecharging purposes only. No datatransfer. All desktop outlets are ULlisted.
Simplex receptacles and USBcharging ports are wired together onthe same circuit.
Units with data ports come withTech Adapters.Connectors and jacks are notincluded are available from thirdparty vendors. Refer to ‘‘TechAdapter Master List’’ for compatiblejacks and connectors.
Islands Collection by Knoll®
97
Electrical Units - Offset Clamp-OnElectrical Outlets
description type pattern no. list
Offset Clamp-on Electric Outlet110, 1 Power + 1 USB
72� Cordset ILEO11072(WW/BB) $315.120� Cordset ILEO110120(WW/BB) 315.Hardwired ILEO110H(WW/BB) 315.
Offset Clamp-on Electric Outlet202, 2 Power + 2 Data Ports
72� Cordset ILEO20272(WW/BB) 252.120� Cordset ILEO202120(WW/BB) 252.Hardwired ILEO202H(WW/BB) 252.Linkable ILEO202L(WW/BB) 252.
Offset Clamp-on Electric Outlet210, 2 Power + 1 USB
72� Cordset ILEO21072(WW/BB) 315.120� Cordset ILEO210120(WW/BB) 315.Hardwired ILEO210H(WW/BB) 315.Linkable ILEO210L(WW/BB) 315.
Offset Clamp-on Electric Outlet311, 3 Power + 1 USB + Data Port
72� Cordset ILEO31172(WW/BB) 373.120� Cordset ILEO311120(WW/BB) 373.Hardwired ILEO311H(WW/BB) 373.Linkable ILEO311L(WW/BB) 373.
Offset Clamp-on Electric Outlet412, 4 Power + 1 USB + 2 Data Ports
72� Cordset ILEO41272(WW/BB) 467.120� Cordset ILEO412120(WW/BB) 467.Hardwired ILEO412H(WW/BB) 467.Linkable ILEO412L(WW/BB) 467.
Order Code
Example: ILEO11072BB
IL Islands Collection byKnoll�
E Electrical AccessoriesO Offset Clamp On
Electrical Outlet110 1 Power, 1 dual USB, 0
Data72 72� Cordset
120=120� cordsetL = LinkableH = Hardwired
BB Color option
Specification Information
To order please specify patternnumber including:1. Color option, (housing/bracket):
BB = Black / BlackWW = White / White
Application Notes
Installation instructions availableon Knoll.com+.
Refer to planning guide pages forcomplete description.
USB / USB-C outlets are forrecharging purposes only. No datatransfer. All desktop outlets are ULlisted.
Simplex receptacles and USBcharging ports are wired together onthe same circuit.
Units with data ports come withTech Adapters.Connectors and jacks are notincluded are available from thirdparty vendors. Refer to ‘‘TechAdapter Master List’’ for compatiblejacks and connectors.
Islands Collection by Knoll®
98
Electrical Units - Offset Clamp-OnElectrical Outlets
description type pattern no. list
Offset Clamp-on Electric Outlet21C, 2 Power + 1 USB + 1 USB C
72� Cordset ILEO21C72(WW/BB) $525.120� Cordset ILEO21C120(WW/BB) 525.Hardwired ILEO21CH(WW/BB) 525.Linkable ILEO21CL(WW/BB) 525.
Order Code
Example: ILEO11072BB
IL Islands Collection byKnoll�
E Electrical AccessoriesO Offset Clamp On
Electrical Outlet110 1 Power, 1 dual USB, 0
Data72 72� Cordset
120=120� cordsetL = LinkableH = Hardwired
BB Color option
Specification Information
To order please specify patternnumber including:1. Color option, (housing/bracket):
BB = Black / BlackWW = White / White
Application Notes
Installation instructions availableon Knoll.com+.
Refer to planning guide pages forcomplete description.
USB / USB-C outlets are forrecharging purposes only. No datatransfer. All desktop outlets are ULlisted.
Simplex receptacles and USBcharging ports are wired together onthe same circuit.
Units with data ports come withTech Adapters.Connectors and jacks are notincluded are available from thirdparty vendors. Refer to ‘‘TechAdapter Master List’’ for compatiblejacks and connectors.
Islands Collection by Knoll®
99
Electrical Units - for ChicagoClamp-On Electrical Outlets
description type pattern no. list
Clamp-on Electric Outlet110, 1 Power + 1 USB
108� whip ILECC110108(WW/BB) $315.
Clamp-on Electric Outlet202, 2 Power + 2 Data Ports
108� whip ILECC202108(WW/BB) 252.
Clamp-on Electric Outlet210, 2 Power + 1 USB
108� whip ILECC210108(WW/BB) 315.
Clamp-on Electric Outlet311, 3 Power + 1 USB + Data Port
108� whip ILECC311108(WW/BB) 373.
Clamp-on Electric Outlet412, 4 Power + 1 USB + 2 Data Ports
108� whip ILECC412108(WW/BB) 467.
Order Code
Example: ILEC11072BB
IL Islands Collection byKnoll�
E Electrical AccessoriesC Clamp On Electric
Outlet110 1 Power, 1 dual USB, 0
Data72 72� Cordset
120=120� cordsetL = LinkableH = Hardwired
BB Color option
Specification Information
To order please specify patternnumber including:1. Color option, (housing/bracket):
BB = Black / BlackWW = White / White
Application Notes
Installation instructions availableon Knoll.com+.
Refer to planning guide pages forcomplete description.
USB / USB-C outlets are forrecharging purposes only. No datatransfer. All desktop outlets are ULlisted.
Simplex receptacles and USBcharging ports are wired together onthe same circuit.
Units with data ports come withTech Adapters.Connectors and jacks are notincluded are available from thirdparty vendors. Refer to ‘‘TechAdapter Master List’’ for compatiblejacks and connectors.
Islands Collection by Knoll®
100
Electrical Units - for ChicagoClamp-On Electrical Outlets
description type pattern no. list
Clamp-on Electric Outlet21C, 2 Power + 1 USB + 1 USB C
108� whip ILECC21CC108(WW/BB) $525.
Order Code
Example: ILEC11072BB
IL Islands Collection byKnoll�
E Electrical AccessoriesC Clamp On Electric
Outlet110 1 Power, 1 dual USB, 0
Data72 72� Cordset
120=120� cordsetL = LinkableH = Hardwired
BB Color option
Specification Information
To order please specify patternnumber including:1. Color option, (housing/bracket):
BB = Black / BlackWW = White / White
Application Notes
Installation instructions availableon Knoll.com+.
Refer to planning guide pages forcomplete description.
USB / USB-C outlets are forrecharging purposes only. No datatransfer. All desktop outlets are ULlisted.
Simplex receptacles and USBcharging ports are wired together onthe same circuit.
Units with data ports come withTech Adapters.Connectors and jacks are notincluded are available from thirdparty vendors. Refer to ‘‘TechAdapter Master List’’ for compatiblejacks and connectors.
Islands Collection by Knoll®
101
Electrical Units - for ChicagoOffset Clamp-On Electrical Outlets
description type pattern no. list
Offset Clamp-on Electric Outlet110, 1 Power + 1 USB
108� whip ILEOC110108(WW/BB) $315.
Offset Clamp-on Electric Outlet202, 2 Power + 2 Data Ports
108� whip ILEOC202108(WW/BB) 252.
Offset Clamp-on Electric Outlet210, 2 Power + 1 USB
108� whip ILEOC210108(WW/BB) 315.
Offset Clamp-on Electric Outlet311, 3 Power + 1 USB + Data Port
108� whip ILEOC311108(WW/BB) 373.
Offset Clamp-on Electric Outlet412, 4 Power + 1 USB + 2 Data Port
108� whip ILEOC412108(WW/BB) 467.
Order Code
Example: ILEC11072BB
IL Islands Collection byKnoll�
E Electrical AccessoriesC Clamp On Electric
Outlet110 1 Power, 1 dual USB, 0
Data72 72� Cordset
120=120� cordsetL = LinkableH = Hardwired
BB Color option
Specification Information
To order please specify patternnumber including:1. Color option, (housing/bracket):
BB = Black / BlackWW = White / White
Application Notes
Installation instructions availableon Knoll.com+.
Refer to planning guide pages forcomplete description.
USB / USB-C outlets are forrecharging purposes only. No datatransfer. All desktop outlets are ULlisted.
Simplex receptacles and USBcharging ports are wired together onthe same circuit.
Units with data ports come withTech Adapters.Connectors and jacks are notincluded are available from thirdparty vendors. Refer to ‘‘TechAdapter Master List’’ for compatiblejacks and connectors.
Islands Collection by Knoll®
102
Electrical Units - for ChicagoOffset Clamp-On Electrical Outlets
description type pattern no. list
Offset Clamp-on Electric Outlet21C, 2 Power + 1 USB + 1 USB C
108� whip ILEOC21C108(WW/BB) $525.
Order Code
Example: ILEC11072BB
IL Islands Collection byKnoll�
E Electrical AccessoriesC Clamp On Electric
Outlet110 1 Power, 1 dual USB, 0
Data72 72� Cordset
120=120� cordsetL = LinkableH = Hardwired
BB Color option
Specification Information
To order please specify patternnumber including:1. Color option, (housing/bracket):
BB = Black / BlackWW = White / White
Application Notes
Installation instructions availableon Knoll.com+.
Refer to planning guide pages forcomplete description.
USB / USB-C outlets are forrecharging purposes only. No datatransfer. All desktop outlets are ULlisted.
Simplex receptacles and USBcharging ports are wired together onthe same circuit.
Units with data ports come withTech Adapters.Connectors and jacks are notincluded are available from thirdparty vendors. Refer to ‘‘TechAdapter Master List’’ for compatiblejacks and connectors.
Islands Collection by Knoll®
103
Electrical Units - UndermountElectrical Outlets
description type pattern no. list
Undermount Electric Outlet110, 1 Power + 1 USB
72� Cordset ILEU11072(WW/BB) $315.120� Cordset ILEU110120(WW/BB) 315.Hardwired ILEU110H(WW/BB) 315.
Undermount Electric Outlet202, 2 Power + 2 Data Ports
72� Cordset ILEU20272(WW/BB) 252.120� Cordset ILEU202120(WW/BB) 252.Hardwired ILEU202H(WW/BB) 252.Linkable ILEU202L(WW/BB) 252.
Undermount Electric Outlet210, 2 Power + 1 USB
72� Cordset ILEU21072(WW/BB) 315.120� Cordset ILEU210120(WW/BB) 315.Hardwired ILEU210H(WW/BB) 315.Linkable ILEU210L(WW/BB) 315.
Undermount Electric Outlet311, 3 Power + 1 USB + Data Port
72� Cordset ILEU31172(WW/BB) 373.120� Cordset ILEU311120(WW/BB) 373.Hardwired ILEU311H(WW/BB) 373.Linkable ILEU311L(WW/BB) 373.
Undermount Electric Outlet412, 4 Power + 1 USB + 2 Data Ports
72� Cordset ILEU41272(WW/BB) 467.120� Cordset ILEU412120(WW/BB) 467.Hardwired ILEU412H(WW/BB) 467.Linkable ILEU412L(WW/BB) 467.
Undermount Electric Outlet21C, 2 Power + 1 USB + 1 USB C
72� Cordset ILEU21C72(WW/BB) 525.120� Cordset ILEU21C120(WW/BB) 525.Hardwired ILEU21CH(WW/BB) 525.Linkable ILEU21CL(WW/BB) 525.
Order Code
Example: ILEO11072BB
IL Islands Collection byKnoll�
E Electrical AccessoriesO Offset Clamp On
Electrical Outlet110 1 Power, 1 dual USB, 0
Data72 72� Cordset
120=120� cordsetL = LinkableH = Hardwired
BB Color option
Specification Information
To order please specify patternnumber including:1. Color option, (housing/bracket):
BB = Black / BlackWW = White / White
Application Notes
Installation instructions availableon Knoll.com+.
Refer to planning guide pages forcomplete description.
USB / USB-C outlets are forrecharging purposes only. No datatransfer. All desktop outlets are ULlisted.
Simplex receptacles and USBcharging ports are wired together onthe same circuit.
Units with data ports come withTech Adapters.Connectors and jacks are notincluded are available from thirdparty vendors. Refer to ‘‘TechAdapter Master List’’ for compatiblejacks and connectors.
Islands Collection by Knoll®
104
Electrical Units - Wide Channel Desktop OutletsElectrical Outlets
description type pattern no. list
Wide Channel Desktop Electric Outlet110, 1 Power + 1 USB
72� Cordset ILEW11072(BB/WW) $290.120� Cordset ILEW110120(BB/WW) 290.Hardwired ILEW110H(BB/WW) 310.Linkable ILEW110L(BB/WW) 310.
Wide Channel Desktop Electric Outlet202, 2 Power + 2 Data Ports
72� Cordset ILEW20272(BB/WW) 240.120� Cordset ILEW202120(BB/WW) 240.Hardwired ILEW202H(BB/WW) 250.Linkable ILEW202L(BB/WW) 250.
Wide Channel Desktop Electric Outlet210, 2 Power + 1 USB
72� Cordset ILEW21072(WW/BB) 340.120� Cordset ILEW210120(WW/BB) 340.Hardwired ILEW210H(WW/BB) 350.Linkable ILEW210L(WW/BB) 350.
Wide Channel Desktop Electric Outlet311, 3 Power + 1 USB + Data Port
72� Cordset ILEW31172(WW/BB) 380.120� Cordset ILEW311120(WW/BB) 380.Hardwired ILEW311H(WW/BB) 400.Linkable ILEW311L(WW/BB) 400.
Wide Channel Desktop Electric Outlet412, 4 Power + 1 USB + 2 Data Ports
72� Cordset ILEW41272(WW/BB) 475.120� Cordset ILEW412120(WW/BB) 475.Hardwired ILEW412H(WW/BB) 500.Linkable ILEW412L(WW/BB) 500.
Order Code
Example: ILEW11072BB
IL Islands Collection byKnoll�
E Electrical AccessoriesW Wide Channel Desktop
Electrical Outlet110 1 Power, 1 dual USB, 0
Data72 72� Cordset
120=120� cordsetL = LinkableH = Hardwired
BB Color option
Specification Information
To order please specify patternnumber including:1. Color option, (housing/bracket):
BB = Black / BlackWW = White / White
Application Notes
Installation instructions availableon Knoll.com+.
Refer to planning guide pages forcomplete description.
USB / USB-C outlets are forrecharging purposes only. No datatransfer. All desktop outlets are ULlisted.
Simplex receptacles and USBcharging ports are wired together onthe same circuit.
Units with data ports come withTech Adapters.Connectors and jacks are notincluded are available from thirdparty vendors. Refer to ‘‘TechAdapter Master List’’ for compatiblejacks and connectors.
Islands Collection by Knoll®
105
Electrical Units - Wide Channel Desktop OutletsElectrical Outlets
description type pattern no. list
Wide Channel Desktop Electric Outlet21C, 2 Power + 1 USB + 1 USB C
72� Cordset ILEW21C72(WW/BB) $540.120� Cordset ILEW21C120(WW/BB) 540.Hardwired ILEW21CH(WW/BB) 580.Linkable ILEW21CL(WW/BB) 580.
Order Code
Example: ILEW11072BB
IL Islands Collection byKnoll�
E Electrical AccessoriesW Wide Channel Desktop
Electrical Outlet110 1 Power, 1 dual USB, 0
Data72 72� Cordset
120=120� cordsetL = LinkableH = Hardwired
BB Color option
Specification Information
To order please specify patternnumber including:1. Color option, (housing/bracket):
BB = Black / BlackWW = White / White
Application Notes
Installation instructions availableon Knoll.com+.
Refer to planning guide pages forcomplete description.
USB / USB-C outlets are forrecharging purposes only. No datatransfer. All desktop outlets are ULlisted.
Simplex receptacles and USBcharging ports are wired together onthe same circuit.
Units with data ports come withTech Adapters.Connectors and jacks are notincluded are available from thirdparty vendors. Refer to ‘‘TechAdapter Master List’’ for compatiblejacks and connectors.
Islands Collection by Knoll®
106
Wire ManagementCable Clips
description type d w h pattern no. list
Cable Clips - X-Base Table set of 3 2.3� 2.8� 1� ILECX1 $30.
Cable Clips - MX-Base Table set of 3 .8� 1.2� 1� ILECM1 30.
Order Code
Example: ILECX1
IL Islands Collection byKnoll�
E Electrical AccessoriesCX Cable clip for X-Base1 Set of 3
Specification Information Application Notes
Cable clips are clear.
All electrical accessories arespecified separately.Refer to Accessories section forelectrical component pricing.
Islands Collection by Knoll®
107
pattern no. page
ILEC110120(WW/BB) 96
ILEC11072(WW/BB) 96
ILEC110H(WW/BB) 96
ILEC202120(WW/BB) 96
ILEC20272(WW/BB) 96
ILEC202H(WW/BB) 96
ILEC202L(WW/BB) 96
ILEC210120(WW/BB) 96
ILEC21072(WW/BB) 96
ILEC210H(WW/BB) 96
ILEC210L(WW/BB) 96
ILEC21C120(WW/BB) 97
ILEC21C72(WW/BB) 97
ILEC21CH(WW/BB) 97
ILEC21CL(WW/BB) 97
ILEC311120(WW/BB) 96
ILEC31172(WW/BB) 96
ILEC311H(WW/BB) 96
ILEC311L(WW/BB) 96
ILEC412120(WW/BB) 96
ILEC41272(WW/BB) 96
ILEC412H(WW/BB) 96
ILEC412L(WW/BB) 96
ILECC110108(WW/BB) 100
ILECC202108(WW/BB) 100
ILECC210108(WW/BB) 100
ILECC21CC108(WW/BB) 101
ILECC311108(WW/BB) 100
ILECC412108(WW/BB) 100
ILECM1 107
ILECX1 107
ILED110120(BB/WW) 90
ILED11072(BB/WW) 90
ILED110H(BB/WW) 90
ILED110L(BB/WW) 90
ILED202120(BB/WW) 90
ILED20272(BB/WW) 90
ILED202H(BB/WW) 90
ILED202L(BB/WW) 90
ILED210120(BB/WW) 90
ILED21072(BB/WW) 90
ILED210H(BB/WW) 90
ILED210L(BB/WW) 90
ILED21C120(BB/WW) 91
ILED21C72(BB/WW) 91
ILED21CH(BB/WW) 91
ILED21CL(BB/WW) 91
ILED311120(BB/WW) 90
ILED31172(BB/WW) 90
ILED311H(BB/WW) 90
ILED311L(BB/WW) 90
ILED412120(BB/WW) 91
ILED41272(BB/WW) 91
ILED412H(BB/WW) 91
ILED412L(BB/WW) 91
ILEI120 92
ILEI60 92
ILEJ102 92
ILEJ108 92
ILEJ114 92
ILEJ120 92
pattern no. page
ILEJ126 92
ILEJ132 92
ILEJ24 92
ILEJ30 92
ILEJ36 92
ILEJ42 92
ILEJ48 92
ILEJ54 92
ILEJ60 92
ILEJ66 92
ILEJ72 92
ILEJ78 92
ILEJ84 92
ILEJ90 92
ILEJ96 92
ILEO110120(WW/BB) 98
ILEO11072(WW/BB) 98
ILEO110H(WW/BB) 98
ILEO202120(WW/BB) 98
ILEO20272(WW/BB) 98
ILEO202H(WW/BB) 98
ILEO202L(WW/BB) 98
ILEO210120(WW/BB) 98
ILEO21072(WW/BB) 98
ILEO210H(WW/BB) 98
ILEO210L(WW/BB) 98
ILEO21C120(WW/BB) 99
ILEO21C72(WW/BB) 99
ILEO21CH(WW/BB) 99
ILEO21CL(WW/BB) 99
ILEO311120(WW/BB) 98
ILEO31172(WW/BB) 98
ILEO311H(WW/BB) 98
ILEO311L(WW/BB) 98
ILEO412120(WW/BB) 98
ILEO41272(WW/BB) 98
ILEO412H(WW/BB) 98
ILEO412L(WW/BB) 98
ILEOC110108(WW/BB) 102
ILEOC202108(WW/BB) 102
ILEOC210108(WW/BB) 102
ILEOC21C108(WW/BB) 103
ILEOC311108(WW/BB) 102
ILEOC412108(WW/BB) 102
ILEPLJ24 95
ILEPLS120 95
ILEPLS72 95
ILEPSPEPU(W/G/B)C 94
ILEPSPEPU(W/G/B)H 94
ILEPSPEPU(W/G/B)L 94
ILEPSPHPE(W/G/B)C 94
ILEPSPHPE(W/G/B)H 94
ILEPSPHPE(W/G/B)L 94
ILEPSPHPU(W/G/B)C 94
ILEPSPHPU(W/G/B)H 94
ILEPSPHPU(W/G/B)L 94
ILEPSPNPN(W/G/B)C 93
ILEPSPNPN(W/G/B)H 93
ILEPSPNPN(W/G/B)L 93
ILEPSPPPH(W/G/B)C 93
ILEPSPPPH(W/G/B)H 93
pattern no. page
ILEPSPPPH(W/G/B)L 93
ILEPSPPPN(W/G/B)C 93
ILEPSPPPN(W/G/B)H 93
ILEPSPPPN(W/G/B)L 93
ILEPSPPPU(W/G/B)C 93
ILEPSPPPU(W/G/B)H 93
ILEPSPPPU(W/G/B)L 93
ILEPSPUPU(W/G/B)C 93
ILEPSPUPU(W/G/B)H 93
ILEPSPUPU(W/G/B)L 93
ILEU110120(WW/BB) 104
ILEU11072(WW/BB) 104
ILEU110H(WW/BB) 104
ILEU202120(WW/BB) 104
ILEU20272(WW/BB) 104
ILEU202H(WW/BB) 104
ILEU202L(WW/BB) 104
ILEU210120(WW/BB) 104
ILEU21072(WW/BB) 104
ILEU210H(WW/BB) 104
ILEU210L(WW/BB) 104
ILEU21C120(WW/BB) 104
ILEU21C72(WW/BB) 104
ILEU21CH(WW/BB) 104
ILEU21CL(WW/BB) 104
ILEU311120(WW/BB) 104
ILEU31172(WW/BB) 104
ILEU311H(WW/BB) 104
ILEU311L(WW/BB) 104
ILEU412120(WW/BB) 104
ILEU41272(WW/BB) 104
ILEU412H(WW/BB) 104
ILEU412L(WW/BB) 104
ILEW110120(BB/WW) 105
ILEW11072(BB/WW) 105
ILEW110H(BB/WW) 105
ILEW110L(BB/WW) 105
ILEW202120(BB/WW) 105
ILEW20272(BB/WW) 105
ILEW202H(BB/WW) 105
ILEW202L(BB/WW) 105
ILEW210120(WW/BB) 105
ILEW21072(WW/BB) 105
ILEW210H(WW/BB) 105
ILEW210L(WW/BB) 105
ILEW21C120(WW/BB) 106
ILEW21C72(WW/BB) 106
ILEW21CH(WW/BB) 106
ILEW21CL(WW/BB) 106
ILEW311120(WW/BB) 105
ILEW31172(WW/BB) 105
ILEW311H(WW/BB) 105
ILEW311L(WW/BB) 105
ILEW412120(WW/BB) 105
ILEW41272(WW/BB) 105
ILEW412H(WW/BB) 105
ILEW412L(WW/BB) 105
ILTCS(S/B4/T4)(SG/SC)52304 27
ILTCS(S/B4/T4)(SG/SC)63364 27
ILTCY(S/B4/T4)(SG/SC)52304 27
ILTCY(S/B4/T4)(SG/SC)63364 27
pattern no. page
ILTCY(S/B/T)M108484(H/V)N 88
ILTCY(S/B/T)M108544(H/V)N 88
ILTCY(S/B/T)M108604(H/V)N 88
ILTCY(S/B/T)M120484(H/V)N 88
ILTCY(S/B/T)M120544(H/V)N 88
ILTCY(S/B/T)M120604(H/V)N 88
ILTCY(S/B/T)M132484(H/V)N 89
ILTCY(S/B/T)M132544(H/V)N 89
ILTCY(S/B/T)M132604(H/V)N 89
ILTCY(S/B/T)M144484(H/V)N 89
ILTCY(S/B/T)M144544(H/V)N 89
ILTCY(S/B/T)M144604(H/V)N 89
ILTCY(S/B/T)M156484(H/V)N 89
ILTCY(S/B/T)M156544(H/V)N 89
ILTCY(S/B/T)M156604(H/V)N 89
ILTCY(S/B/T)M180484(H/V)N 89
ILTCY(S/B/T)M180544(H/V)N 89
ILTCY(S/B/T)M180604(H/V)N 89
ILTCY(S/B/T)M216484(H/V)N 89
ILTCY(S/B/T)M216544(H/V)N 89
ILTCY(S/B/T)M216604(H/V)N 89
ILTCY(S/B/T)M96484(H/V)N 88
ILTCY(S/B/T)M96544(H/V)N 88
ILTCY(S/B/T)MG54451 65
ILTCY(S/B/T)MG54452 65
ILTCY(S/B/T)MG54455 75
ILTCY(S/B/T)MG54456 75
ILTCY(S/B/T)MG60481 65
ILTCY(S/B/T)MG60482 65
ILTCY(S/B/T)MG60485 75
ILTCY(S/B/T)MG60486 75
ILTCY(S/B/T)(MG/MC)54453 65
ILTCY(S/B/T)(MG/MC)54454 69
ILTCY(S/B/T)(MG/MC)60483 65
ILTCY(S/B/T)(MG/MC)60484 69
ILTEH(S/B/T)M108484(H/V)N 86
ILTEH(S/B/T)M108544(H/V)N 86
ILTEH(S/B/T)M108604(H/V)N 86
ILTEH(S/B/T)M120484(H/V)N 86
ILTEH(S/B/T)M120544(H/V)N 86
ILTEH(S/B/T)M120604(H/V)N 86
ILTEH(S/B/T)M132484(H/V)N 87
ILTEH(S/B/T)M132544(H/V)N 87
ILTEH(S/B/T)M132604(H/V)N 87
ILTEH(S/B/T)M144484(H/V)N 87
ILTEH(S/B/T)M144544(H/V)N 87
ILTEH(S/B/T)M144604(H/V)N 87
ILTEH(S/B/T)M156484(H/V)N 87
ILTEH(S/B/T)M156544(H/V)N 87
ILTEH(S/B/T)M156604(H/V)N 87
ILTEH(S/B/T)M180484(H/V)N 87
ILTEH(S/B/T)M180544(H/V)N 87
ILTEH(S/B/T)M180604(H/V)N 87
ILTEH(S/B/T)M216484(H/V)N 87
ILTEH(S/B/T)M216544(H/V)N 87
ILTEH(S/B/T)M216604(H/V)N 87
ILTEH(S/B/T)M96484(H/V)N 86
ILTEH(S/B/T)M96544(H/V)N 86
ILTOE(L/R)(S/B4/T4)SG35601 14
ILTOE(L/R)(S/B4/T4)SG35602 14
ILTOE(L/R)(S/B4/T4)SG39661 14
Alpha-Numeric Index Islands Collection by Knoll®
108
pattern no. page
ILTOE(L/R)(S/B4/T4)SG39662 14
ILTOE(L/R)(S/B4/T4)SG42721 14
ILTOE(L/R)(S/B4/T4)SG42722 14
ILTOE(L/R)(S/B4/T4)SG45781 14
ILTOE(L/R)(S/B4/T4)SG45782 14
ILTOE(L/R)(S/B4/T4)SG48841 14
ILTOE(L/R)(S/B4/T4)SG48842 14
ILTOE(L/R)(S/B4/T4)(SG/SC)35603 14
ILTOE(L/R)(S/B4/T4)(SG/SC)35604 22
ILTOE(L/R)(S/B4/T4)(SG/SC)39663 14
ILTOE(L/R)(S/B4/T4)(SG/SC)39664 22
ILTOE(L/R)(S/B4/T4)(SG/SC)42723 14
ILTOE(L/R)(S/B4/T4)(SG/SC)42724 22
ILTOE(L/R)(S/B4/T4)(SG/SC)45783 14
ILTOE(L/R)(S/B4/T4)(SG/SC)45784 22
ILTOE(L/R)(S/B4/T4)(SG/SC)48843 14
ILTOE(L/R)(S/B4/T4)(SG/SC)48844 22
ILTOPA(S/B4/T4)SG481 11
ILTOPA(S/B4/T4)SG482 11
ILTOPA(S/B4/T4)SG541 11
ILTOPA(S/B4/T4)SG542 11
ILTOPA(S/B4/T4)SG601 11
ILTOPA(S/B4/T4)SG602 11
ILTOPA(S/B4/T4)(SG/SC)483 11
ILTOPA(S/B4/T4)(SG/SC)484 20
ILTOPA(S/B4/T4)(SG/SC)543 11
ILTOPA(S/B4/T4)(SG/SC)544 20
ILTOPA(S/B4/T4)(SG/SC)603 11
ILTOPA(S/B4/T4)(SG/SC)604 20
ILTOPA(S/B/T)MG481 63
ILTOPA(S/B/T)MG482 63
ILTOPA(S/B/T)MG485 74
ILTOPA(S/B/T)MG486 74
ILTOPA(S/B/T)MG541 63
ILTOPA(S/B/T)MG542 63
ILTOPA(S/B/T)MG545 74
ILTOPA(S/B/T)MG546 74
ILTOPA(S/B/T)MG601 63
ILTOPA(S/B/T)MG602 63
ILTOPA(S/B/T)MG605 74
ILTOPA(S/B/T)MG606 74
ILTOPA(S/B/T)(MG/MC)483 63
ILTOPA(S/B/T)(MG/MC)484 68
ILTOPA(S/B/T)(MG/MC)543 63
ILTOPA(S/B/T)(MG/MC)544 68
ILTOPA(S/B/T)(MG/MC)603 63
ILTOPA(S/B/T)(MG/MC)604 68
ILTOPA(S/B/T)X301 33
ILTOPA(S/B/T)X302 33
ILTOPA(S/B/T)X305 42
ILTOPA(S/B/T)X306 42
ILTOPA(S/B/T)X361 33
ILTOPA(S/B/T)X362 33
ILTOPA(S/B/T)X365 42
ILTOPA(S/B/T)X366 42
ILTOPA(S/B/T)X421 33
ILTOPA(S/B/T)X422 33
ILTOPA(S/B/T)X425 42
ILTOPA(S/B/T)X426 42
ILTOPA(S/B/T)(X/XC)303 33
ILTOPA(S/B/T)(X/XC)304 37
ILTOPA(S/B/T)(X/XC)363 33
ILTOPA(S/B/T)(X/XC)364 37
ILTOPA(S/B/T)(X/XC)423 33
ILTOPA(S/B/T)(X/XC)424 37
pattern no. page
ILTOPB(S/B4/T4)SG481 12
ILTOPB(S/B4/T4)SG482 12
ILTOPB(S/B4/T4)SG541 12
ILTOPB(S/B4/T4)SG542 12
ILTOPB(S/B4/T4)SG601 12
ILTOPB(S/B4/T4)SG602 12
ILTOPB(S/B4/T4)(SG/SC)483 12
ILTOPB(S/B4/T4)(SG/SC)484 20
ILTOPB(S/B4/T4)(SG/SC)543 12
ILTOPB(S/B4/T4)(SG/SC)544 20
ILTOPB(S/B4/T4)(SG/SC)603 12
ILTOPB(S/B4/T4)(SG/SC)604 20
ILTOPB(S/B/T)MG481 64
ILTOPB(S/B/T)MG482 64
ILTOPB(S/B/T)MG485 74
ILTOPB(S/B/T)MG486 74
ILTOPB(S/B/T)MG541 64
ILTOPB(S/B/T)MG542 64
ILTOPB(S/B/T)MG545 74
ILTOPB(S/B/T)MG546 74
ILTOPB(S/B/T)MG601 64
ILTOPB(S/B/T)MG602 64
ILTOPB(S/B/T)MG605 74
ILTOPB(S/B/T)MG606 74
ILTOPB(S/B/T)(MG/MC)483 64
ILTOPB(S/B/T)(MG/MC)484 68
ILTOPB(S/B/T)(MG/MC)543 64
ILTOPB(S/B/T)(MG/MC)544 68
ILTOPB(S/B/T)(MG/MC)603 64
ILTOPB(S/B/T)(MG/MC)604 68
ILTOPB(S/B/T)X301 34
ILTOPB(S/B/T)X302 34
ILTOPB(S/B/T)X305 42
ILTOPB(S/B/T)X306 42
ILTOPB(S/B/T)X361 34
ILTOPB(S/B/T)X362 34
ILTOPB(S/B/T)X365 42
ILTOPB(S/B/T)X366 42
ILTOPB(S/B/T)X421 34
ILTOPB(S/B/T)X422 34
ILTOPB(S/B/T)X425 42
ILTOPB(S/B/T)X426 42
ILTOPB(S/B/T)(X/XC)303 34
ILTOPB(S/B/T)(X/XC)304 37
ILTOPB(S/B/T)(X/XC)363 34
ILTOPB(S/B/T)(X/XC)364 37
ILTOPB(S/B/T)(X/XC)423 34
ILTOPB(S/B/T)(X/XC)424 37
ILTOR(L/R)(S/B4/T4)SG33601 15
ILTOR(L/R)(S/B4/T4)SG33602 15
ILTOR(L/R)(S/B4/T4)SG33721 15
ILTOR(L/R)(S/B4/T4)SG33722 15
ILTOR(L/R)(S/B4/T4)SG39601 15
ILTOR(L/R)(S/B4/T4)SG39602 15
ILTOR(L/R)(S/B4/T4)SG39721 15
ILTOR(L/R)(S/B4/T4)SG39722 15
ILTOR(L/R)(S/B4/T4)(SG/SC)33603 15
ILTOR(L/R)(S/B4/T4)(SG/SC)33604 23
ILTOR(L/R)(S/B4/T4)(SG/SC)33723 15
ILTOR(L/R)(S/B4/T4)(SG/SC)33724 23
ILTOR(L/R)(S/B4/T4)(SG/SC)39603 15
ILTOR(L/R)(S/B4/T4)(SG/SC)39604 23
ILTOR(L/R)(S/B4/T4)(SG/SC)39723 15
ILTOR(L/R)(S/B4/T4)(SG/SC)39724 23
ILTOT(L/R)(S/B4/T4)SG36441 13
pattern no. page
ILTOT(L/R)(S/B4/T4)SG36442 13
ILTOT(L/R)(S/B4/T4)SG42511 13
ILTOT(L/R)(S/B4/T4)SG42512 13
ILTOT(L/R)(S/B4/T4)SG48591 13
ILTOT(L/R)(S/B4/T4)SG48592 13
ILTOT(L/R)(S/B4/T4)SG54661 13
ILTOT(L/R)(S/B4/T4)SG54662 13
ILTOT(L/R)(S/B4/T4)SG60741 13
ILTOT(L/R)(S/B4/T4)SG60742 13
ILTOT(L/R)(S/B4/T4)(SG/SC)36443 13
ILTOT(L/R)(S/B4/T4)(SG/SC)36444 21
ILTOT(L/R)(S/B4/T4)(SG/SC)42513 13
ILTOT(L/R)(S/B4/T4)(SG/SC)42514 21
ILTOT(L/R)(S/B4/T4)(SG/SC)48593 13
ILTOT(L/R)(S/B4/T4)(SG/SC)48594 21
ILTOT(L/R)(S/B4/T4)(SG/SC)54663 13
ILTOT(L/R)(S/B4/T4)(SG/SC)54664 21
ILTOT(L/R)(S/B4/T4)(SG/SC)60743 13
ILTOT(L/R)(S/B4/T4)(SG/SC)60744 21
ILTP2(S/B4/T4)SG481 10
ILTP2(S/B4/T4)SG482 10
ILTP2(S/B4/T4)SG541 10
ILTP2(S/B4/T4)SG542 10
ILTP2(S/B4/T4)SG601 10
ILTP2(S/B4/T4)SG602 10
ILTP2(S/B4/T4)(SG/SC)483 10
ILTP2(S/B4/T4)(SG/SC)484 19
ILTP2(S/B4/T4)(SG/SC)543 10
ILTP2(S/B4/T4)(SG/SC)544 19
ILTP2(S/B4/T4)(SG/SC)603 10
ILTP2(S/B4/T4)(SG/SC)604 19
ILTPT(S/B4/T4)SG361 9
ILTPT(S/B4/T4)SG362 9
ILTPT(S/B4/T4)SG421 9
ILTPT(S/B4/T4)SG422 9
ILTPT(S/B4/T4)SG481 9
ILTPT(S/B4/T4)SG482 9
ILTPT(S/B4/T4)SG541 9
ILTPT(S/B4/T4)SG542 9
ILTPT(S/B4/T4)SG601 9
ILTPT(S/B4/T4)SG602 9
ILTPT(S/B4/T4)(SG/SC)363 9
ILTPT(S/B4/T4)(SG/SC)423 9
ILTPT(S/B4/T4)(SG/SC)483 9
ILTPT(S/B4/T4)(SG/SC)484 19
ILTPT(S/B4/T4)(SG/SC)543 9
ILTPT(S/B4/T4)(SG/SC)544 19
ILTPT(S/B4/T4)(SG/SC)603 9
ILTPT(S/B4/T4)(SG/SC)604 19
ILTPT(S/B/T)(MG/MC)453 62
ILTPT(S/B/T)(MG/MC)454 68
ILTPT(S/B/T)(MG/MC)483 62
ILTPT(S/B/T)(MG/MC)484 68
ILTPT(S/B/T)(MG/MC)543 62
ILTPT(S/B/T)(MG/MC)544 68
ILTPT(S/B/T)(MG/MC)603 62
ILTPT(S/B/T)(MG/MC)604 68
ILTRC(S/B4/T4)(SG/SC)48244 25
ILTRC(S/B4/T4)(SG/SC)48304 25
ILTRC(S/B4/T4)(SG/SC)48364 25
ILTRC(S/B4/T4)(SG/SC)54244 25
ILTRC(S/B4/T4)(SG/SC)54304 25
ILTRC(S/B4/T4)(SG/SC)54364 25
ILTRC(S/B4/T4)(SG/SC)60244 25
ILTRC(S/B4/T4)(SG/SC)60304 25
pattern no. page
ILTRC(S/B4/T4)(SG/SC)60364 25
ILTRC(S/B4/T4)(SG/SC)66244 25
ILTRC(S/B4/T4)(SG/SC)66304 25
ILTRC(S/B4/T4)(SG/SC)66364 25
ILTRC(S/B4/T4)(SG/SC)72244 25
ILTRC(S/B4/T4)(SG/SC)72304 25
ILTRC(S/B4/T4)(SG/SC)72364 25
ILTRC(S/B4/T4)(SG/SC)78244 25
ILTRC(S/B4/T4)(SG/SC)78304 25
ILTRC(S/B4/T4)(SG/SC)78364 25
ILTRC(S/B4/T4)(SG/SC)84244 25
ILTRC(S/B4/T4)(SG/SC)84304 25
ILTRC(S/B4/T4)(SG/SC)84364 25
ILTRC(S/B/T)M108484(H/V)N 80
ILTRC(S/B/T)M108544(H/V)N 80
ILTRC(S/B/T)M108604(H/V)N 80
ILTRC(S/B/T)M120484(H/V)N 80
ILTRC(S/B/T)M120544(H/V)N 80
ILTRC(S/B/T)M120604(H/V)N 80
ILTRC(S/B/T)M132484(H/V)N 81
ILTRC(S/B/T)M132544(H/V)N 81
ILTRC(S/B/T)M132604(H/V)N 81
ILTRC(S/B/T)M144484(H/V)N 81
ILTRC(S/B/T)M144544(H/V)N 81
ILTRC(S/B/T)M144604(H/V)N 81
ILTRC(S/B/T)M156484(H/V)N 81
ILTRC(S/B/T)M156544(H/V)N 81
ILTRC(S/B/T)M156604(H/V)N 81
ILTRC(S/B/T)M180484(H/V)N 81
ILTRC(S/B/T)M180544(H/V)N 81
ILTRC(S/B/T)M180604(H/V)N 81
ILTRC(S/B/T)M216484(H/V)N 81
ILTRC(S/B/T)M216544(H/V)N 81
ILTRC(S/B/T)M216604(H/V)N 81
ILTRC(S/B/T)M96484(H/V)N 80
ILTRC(S/B/T)M96544(H/V)N 80
ILTRC(S/B/T)X108364H 49
ILTRC(S/B/T)X108424H 49
ILTRC(S/B/T)X108484H 49
ILTRC(S/B/T)X120364H 51
ILTRC(S/B/T)X120364V 50
ILTRC(S/B/T)X120424H 51
ILTRC(S/B/T)X120424V 50
ILTRC(S/B/T)X120484H 51
ILTRC(S/B/T)X120484V 50
ILTRC(S/B/T)X132364H 51
ILTRC(S/B/T)X132364V 50
ILTRC(S/B/T)X132424H 51
ILTRC(S/B/T)X132424V 50
ILTRC(S/B/T)X132484H 51
ILTRC(S/B/T)X132484V 50
ILTRC(S/B/T)X144364H 51
ILTRC(S/B/T)X144364V 50
ILTRC(S/B/T)X144424H 51
ILTRC(S/B/T)X144424V 50
ILTRC(S/B/T)X144484H 51
ILTRC(S/B/T)X144484V 50
ILTRC(S/B/T)X156364H 51
ILTRC(S/B/T)X156364V 50
ILTRC(S/B/T)X156424H 51
ILTRC(S/B/T)X156424V 50
ILTRC(S/B/T)X156484H 51
ILTRC(S/B/T)X156484V 50
ILTRC(S/B/T)X72364H 49
ILTRC(S/B/T)X78364H 49
Islands Collection by Knoll®
109
pattern no. page
ILTRC(S/B/T)X78424H 49
ILTRC(S/B/T)X84364H 49
ILTRC(S/B/T)X84424H 49
ILTRC(S/B/T)X90364H 49
ILTRC(S/B/T)X90424H 49
ILTRC(S/B/T)X90484H 49
ILTRC(S/B/T)X96364H 49
ILTRC(S/B/T)X96424H 49
ILTRC(S/B/T)X96484H 49
ILTRD(S/B4/T4)SG301 5
ILTRD(S/B4/T4)SG302 5
ILTRD(S/B4/T4)SG361 5
ILTRD(S/B4/T4)SG362 5
ILTRD(S/B4/T4)SG421 5
ILTRD(S/B4/T4)SG422 5
ILTRD(S/B4/T4)SG481 5
ILTRD(S/B4/T4)SG482 5
ILTRD(S/B4/T4)SG541 5
ILTRD(S/B4/T4)SG542 5
ILTRD(S/B4/T4)SG601 5
ILTRD(S/B4/T4)SG602 5
ILTRD(S/B4/T4)(SG/SC)303 5
ILTRD(S/B4/T4)(SG/SC)363 5
ILTRD(S/B4/T4)(SG/SC)423 5
ILTRD(S/B4/T4)(SG/SC)483 5
ILTRD(S/B4/T4)(SG/SC)484 16
ILTRD(S/B4/T4)(SG/SC)543 5
ILTRD(S/B4/T4)(SG/SC)544 16
ILTRD(S/B4/T4)(SG/SC)603 5
ILTRD(S/B4/T4)(SG/SC)604 16
ILTRD(S/B/T)MG451 58
ILTRD(S/B/T)MG452 58
ILTRD(S/B/T)MG455 70
ILTRD(S/B/T)MG456 70
ILTRD(S/B/T)MG481 58
ILTRD(S/B/T)MG482 58
ILTRD(S/B/T)MG485 70
ILTRD(S/B/T)MG486 70
ILTRD(S/B/T)MG541 58
ILTRD(S/B/T)MG542 58
ILTRD(S/B/T)MG545 70
ILTRD(S/B/T)MG546 70
ILTRD(S/B/T)MG601 58
ILTRD(S/B/T)MG602 58
ILTRD(S/B/T)MG605 70
ILTRD(S/B/T)MG606 70
ILTRD(S/B/T)(MG/MC)453 58
ILTRD(S/B/T)(MG/MC)454 66
ILTRD(S/B/T)(MG/MC)483 58
ILTRD(S/B/T)(MG/MC)484 66
ILTRD(S/B/T)(MG/MC)543 58
ILTRD(S/B/T)(MG/MC)544 66
ILTRD(S/B/T)(MG/MC)603 58
ILTRD(S/B/T)(MG/MC)604 66
ILTRD(S/B/T)X301 28
ILTRD(S/B/T)X302 28
ILTRD(S/B/T)X305 38
ILTRD(S/B/T)X306 38
ILTRD(S/B/T)X361 28
ILTRD(S/B/T)X362 28
ILTRD(S/B/T)X365 38
ILTRD(S/B/T)X366 38
ILTRD(S/B/T)X421 28
ILTRD(S/B/T)X422 28
ILTRD(S/B/T)X425 38
pattern no. page
ILTRD(S/B/T)X426 38
ILTRD(S/B/T)(X/XC)303 28
ILTRD(S/B/T)(X/XC)304 35
ILTRD(S/B/T)(X/XC)363 28
ILTRD(S/B/T)(X/XC)364 35
ILTRD(S/B/T)(X/XC)423 28
ILTRD(S/B/T)(X/XC)424 35
ILTRL(S/B4/T4)(SG/SC)48244 24
ILTRL(S/B4/T4)(SG/SC)48304 24
ILTRL(S/B4/T4)(SG/SC)48364 24
ILTRL(S/B4/T4)(SG/SC)54244 24
ILTRL(S/B4/T4)(SG/SC)54304 24
ILTRL(S/B4/T4)(SG/SC)54364 24
ILTRL(S/B4/T4)(SG/SC)60244 24
ILTRL(S/B4/T4)(SG/SC)60304 24
ILTRL(S/B4/T4)(SG/SC)60364 24
ILTRL(S/B4/T4)(SG/SC)66244 24
ILTRL(S/B4/T4)(SG/SC)66304 24
ILTRL(S/B4/T4)(SG/SC)66364 24
ILTRL(S/B4/T4)(SG/SC)72244 24
ILTRL(S/B4/T4)(SG/SC)72304 24
ILTRL(S/B4/T4)(SG/SC)72364 24
ILTRL(S/B4/T4)(SG/SC)78244 24
ILTRL(S/B4/T4)(SG/SC)78304 24
ILTRL(S/B4/T4)(SG/SC)78364 24
ILTRL(S/B4/T4)(SG/SC)84244 24
ILTRL(S/B4/T4)(SG/SC)84304 24
ILTRL(S/B4/T4)(SG/SC)84364 24
ILTRL(S/B/T)M108484(H/V)N 78
ILTRL(S/B/T)M108544(H/V)N 78
ILTRL(S/B/T)M108604(H/V)N 78
ILTRL(S/B/T)M120484(H/V)N 78
ILTRL(S/B/T)M120544(H/V)N 78
ILTRL(S/B/T)M120604(H/V)N 78
ILTRL(S/B/T)M132484(H/V)N 79
ILTRL(S/B/T)M132544(H/V)N 79
ILTRL(S/B/T)M132604(H/V)N 79
ILTRL(S/B/T)M144484(H/V)N 79
ILTRL(S/B/T)M144544(H/V)N 79
ILTRL(S/B/T)M144604(H/V)N 79
ILTRL(S/B/T)M156484(H/V)N 79
ILTRL(S/B/T)M156544(H/V)N 79
ILTRL(S/B/T)M156604(H/V)N 79
ILTRL(S/B/T)M180484(H/V)N 79
ILTRL(S/B/T)M180544(H/V)N 79
ILTRL(S/B/T)M180604(H/V)N 79
ILTRL(S/B/T)M216484(H/V)N 79
ILTRL(S/B/T)M216544(H/V)N 79
ILTRL(S/B/T)M216604(H/V)N 79
ILTRL(S/B/T)M96484(H/V)N 78
ILTRL(S/B/T)M96544(H/V)N 78
ILTRL(S/B/T)X108364H 46
ILTRL(S/B/T)X108424H 46
ILTRL(S/B/T)X108484H 46
ILTRL(S/B/T)X120364H 48
ILTRL(S/B/T)X120364V 47
ILTRL(S/B/T)X120424H 48
ILTRL(S/B/T)X120424V 47
ILTRL(S/B/T)X120484H 48
ILTRL(S/B/T)X120484V 47
ILTRL(S/B/T)X132364H 48
ILTRL(S/B/T)X132364V 47
ILTRL(S/B/T)X132424H 48
ILTRL(S/B/T)X132424V 47
ILTRL(S/B/T)X132484H 48
pattern no. page
ILTRL(S/B/T)X132484V 47
ILTRL(S/B/T)X144364H 48
ILTRL(S/B/T)X144364V 47
ILTRL(S/B/T)X144424H 48
ILTRL(S/B/T)X144424V 47
ILTRL(S/B/T)X144484H 48
ILTRL(S/B/T)X144484V 47
ILTRL(S/B/T)X156364H 48
ILTRL(S/B/T)X156364V 47
ILTRL(S/B/T)X156424H 48
ILTRL(S/B/T)X156424V 47
ILTRL(S/B/T)X156484H 48
ILTRL(S/B/T)X156484V 47
ILTRL(S/B/T)X72364H 46
ILTRL(S/B/T)X78364H 46
ILTRL(S/B/T)X78424H 46
ILTRL(S/B/T)X84364H 46
ILTRL(S/B/T)X84424H 46
ILTRL(S/B/T)X90364H 46
ILTRL(S/B/T)X90424H 46
ILTRL(S/B/T)X90484H 46
ILTRL(S/B/T)X96364H 46
ILTRL(S/B/T)X96424H 46
ILTRL(S/B/T)X96484H 46
ILTRR(S/B/T)M108484(H/V)N 82
ILTRR(S/B/T)M108544(H/V)N 82
ILTRR(S/B/T)M108604(H/V)N 82
ILTRR(S/B/T)M120484(H/V)N 82
ILTRR(S/B/T)M120544(H/V)N 82
ILTRR(S/B/T)M120604(H/V)N 82
ILTRR(S/B/T)M132484(H/V)N 83
ILTRR(S/B/T)M132544(H/V)N 83
ILTRR(S/B/T)M132604(H/V)N 83
ILTRR(S/B/T)M144484(H/V)N 83
ILTRR(S/B/T)M144544(H/V)N 83
ILTRR(S/B/T)M144604(H/V)N 83
ILTRR(S/B/T)M156484(H/V)N 83
ILTRR(S/B/T)M156544(H/V)N 83
ILTRR(S/B/T)M156604(H/V)N 83
ILTRR(S/B/T)M180484(H/V)N 83
ILTRR(S/B/T)M180544(H/V)N 83
ILTRR(S/B/T)M180604(H/V)N 83
ILTRR(S/B/T)M216484(H/V)N 83
ILTRR(S/B/T)M216544(H/V)N 83
ILTRR(S/B/T)M216604(H/V)N 83
ILTRR(S/B/T)M96484(H/V)N 82
ILTRR(S/B/T)M96544(H/V)N 82
ILTRR(S/B/T)X108364H 52
ILTRR(S/B/T)X108424H 52
ILTRR(S/B/T)X108484H 52
ILTRR(S/B/T)X120364H 54
ILTRR(S/B/T)X120364V 53
ILTRR(S/B/T)X120424H 54
ILTRR(S/B/T)X120424V 53
ILTRR(S/B/T)X120484H 54
ILTRR(S/B/T)X120484V 53
ILTRR(S/B/T)X132364H 54
ILTRR(S/B/T)X132364V 53
ILTRR(S/B/T)X132424H 54
ILTRR(S/B/T)X132424V 53
ILTRR(S/B/T)X132484H 54
ILTRR(S/B/T)X132484V 53
ILTRR(S/B/T)X144364H 54
ILTRR(S/B/T)X144364V 53
ILTRR(S/B/T)X144424H 54
pattern no. page
ILTRR(S/B/T)X144424V 53
ILTRR(S/B/T)X144484H 54
ILTRR(S/B/T)X144484V 53
ILTRR(S/B/T)X156364H 54
ILTRR(S/B/T)X156364V 53
ILTRR(S/B/T)X156424H 54
ILTRR(S/B/T)X156424V 53
ILTRR(S/B/T)X156484H 54
ILTRR(S/B/T)X156484V 53
ILTRR(S/B/T)X72364H 52
ILTRR(S/B/T)X78364H 52
ILTRR(S/B/T)X78424H 52
ILTRR(S/B/T)X84364H 52
ILTRR(S/B/T)X84424H 52
ILTRR(S/B/T)X90364H 52
ILTRR(S/B/T)X90424H 52
ILTRR(S/B/T)X90484H 52
ILTRR(S/B/T)X96364H 52
ILTRR(S/B/T)X96424H 52
ILTRR(S/B/T)X96484H 52
ILTRT(S/B/T)M108484(H/V)N 76
ILTRT(S/B/T)M108544(H/V)N 76
ILTRT(S/B/T)M108604(H/V)N 76
ILTRT(S/B/T)M120484(H/V)N 76
ILTRT(S/B/T)M120544(H/V)N 76
ILTRT(S/B/T)M120604(H/V)N 76
ILTRT(S/B/T)M132484(H/V)N 77
ILTRT(S/B/T)M132544(H/V)N 77
ILTRT(S/B/T)M132604(H/V)N 77
ILTRT(S/B/T)M144484(H/V)N 77
ILTRT(S/B/T)M144544(H/V)N 77
ILTRT(S/B/T)M144604(H/V)N 77
ILTRT(S/B/T)M156484(H/V)N 77
ILTRT(S/B/T)M156544(H/V)N 77
ILTRT(S/B/T)M156604(H/V)N 77
ILTRT(S/B/T)M180484(H/V)N 77
ILTRT(S/B/T)M180544(H/V)N 77
ILTRT(S/B/T)M180604(H/V)N 77
ILTRT(S/B/T)M216484(H/V)N 77
ILTRT(S/B/T)M216544(H/V)N 77
ILTRT(S/B/T)M216604(H/V)N 77
ILTRT(S/B/T)M96484(H/V)N 76
ILTRT(S/B/T)M96544(H/V)N 76
ILTRT(S/B/T)X108364H 43
ILTRT(S/B/T)X108424H 43
ILTRT(S/B/T)X108484H 43
ILTRT(S/B/T)X120364H 45
ILTRT(S/B/T)X120364V 44
ILTRT(S/B/T)X120424H 45
ILTRT(S/B/T)X120424V 44
ILTRT(S/B/T)X120484H 45
ILTRT(S/B/T)X120484V 44
ILTRT(S/B/T)X132364H 45
ILTRT(S/B/T)X132364V 44
ILTRT(S/B/T)X132424H 45
ILTRT(S/B/T)X132424V 44
ILTRT(S/B/T)X132484H 45
ILTRT(S/B/T)X132484V 44
ILTRT(S/B/T)X144364H 45
ILTRT(S/B/T)X144364V 44
ILTRT(S/B/T)X144424H 45
ILTRT(S/B/T)X144424V 44
ILTRT(S/B/T)X144484H 45
ILTRT(S/B/T)X144484V 44
ILTRT(S/B/T)X156364H 45
Islands Collection by Knoll®
110
pattern no. page
ILTRT(S/B/T)X156364V 44
ILTRT(S/B/T)X156424H 45
ILTRT(S/B/T)X156424V 44
ILTRT(S/B/T)X156484H 45
ILTRT(S/B/T)X156484V 44
ILTRT(S/B/T)X72364H 43
ILTRT(S/B/T)X78364H 43
ILTRT(S/B/T)X78424H 43
ILTRT(S/B/T)X84364H 43
ILTRT(S/B/T)X84424H 43
ILTRT(S/B/T)X90364H 43
ILTRT(S/B/T)X90424H 43
ILTRT(S/B/T)X90484H 43
ILTRT(S/B/T)X96364H 43
ILTRT(S/B/T)X96424H 43
ILTRT(S/B/T)X96484H 43
ILTSA(S/B/T)MG485 71, 72
ILTSA(S/B/T)MG486 71, 72
ILTSA(S/B/T)MG545 71, 72
ILTSA(S/B/T)MG546 71, 72
ILTSA(S/B/T)MG605 71, 72
ILTSA(S/B/T)MG606 71, 72
ILTSA(S/B/T)(MG/MC)484 67
ILTSA(S/B/T)(MG/MC)544 67
ILTSA(S/B/T)(MG/MC)604 67
ILTSC(S/B4/T4)SG301 7
ILTSC(S/B4/T4)SG302 7
ILTSC(S/B4/T4)SG361 7
ILTSC(S/B4/T4)SG362 7
ILTSC(S/B4/T4)SG421 7
ILTSC(S/B4/T4)SG422 7
ILTSC(S/B4/T4)SG481 7
ILTSC(S/B4/T4)SG482 7
ILTSC(S/B4/T4)SG541 7
ILTSC(S/B4/T4)SG542 7
ILTSC(S/B4/T4)SG601 7
ILTSC(S/B4/T4)SG602 7
ILTSC(S/B4/T4)(SG/SC)303 7
ILTSC(S/B4/T4)(SG/SC)363 7
ILTSC(S/B4/T4)(SG/SC)364 17
ILTSC(S/B4/T4)(SG/SC)423 7
ILTSC(S/B4/T4)(SG/SC)424 17
ILTSC(S/B4/T4)(SG/SC)483 7
ILTSC(S/B4/T4)(SG/SC)484 17
ILTSC(S/B4/T4)(SG/SC)543 7
ILTSC(S/B4/T4)(SG/SC)544 17
ILTSC(S/B4/T4)(SG/SC)603 7
ILTSC(S/B4/T4)(SG/SC)604 17
ILTSC(S/B/T)MG481 60
ILTSC(S/B/T)MG482 60
ILTSC(S/B/T)MG485 72
ILTSC(S/B/T)MG486 72
ILTSC(S/B/T)MG541 60
ILTSC(S/B/T)MG542 60
ILTSC(S/B/T)MG545 72
ILTSC(S/B/T)MG546 72
ILTSC(S/B/T)MG601 60
ILTSC(S/B/T)MG602 60
ILTSC(S/B/T)MG605 72
ILTSC(S/B/T)MG606 72
ILTSC(S/B/T)(MG/MC)483 60
ILTSC(S/B/T)(MG/MC)484 67
ILTSC(S/B/T)(MG/MC)543 60
ILTSC(S/B/T)(MG/MC)544 67
ILTSC(S/B/T)(MG/MC)603 60
pattern no. page
ILTSC(S/B/T)(MG/MC)604 67
ILTSC(S/B/T)X301 31
ILTSC(S/B/T)X302 31
ILTSC(S/B/T)X305 40
ILTSC(S/B/T)X306 40
ILTSC(S/B/T)X361 31
ILTSC(S/B/T)X362 31
ILTSC(S/B/T)X365 40
ILTSC(S/B/T)X366 40
ILTSC(S/B/T)X421 31
ILTSC(S/B/T)X422 31
ILTSC(S/B/T)X425 40
ILTSC(S/B/T)X426 40
ILTSC(S/B/T)(X/XC)303 31
ILTSC(S/B/T)(X/XC)304 36
ILTSC(S/B/T)(X/XC)363 31
ILTSC(S/B/T)(X/XC)364 36
ILTSC(S/B/T)(X/XC)423 31
ILTSC(S/B/T)(X/XC)424 36
ILTSP(S/B/T)MG451 62
ILTSP(S/B/T)MG452 62
ILTSP(S/B/T)MG455 73
ILTSP(S/B/T)MG456 73
ILTSP(S/B/T)MG481 62
ILTSP(S/B/T)MG482 62
ILTSP(S/B/T)MG485 73
ILTSP(S/B/T)MG486 73
ILTSP(S/B/T)MG541 62
ILTSP(S/B/T)MG542 62
ILTSP(S/B/T)MG545 73
ILTSP(S/B/T)MG546 73
ILTSP(S/B/T)MG601 62
ILTSP(S/B/T)MG602 62
ILTSP(S/B/T)MG605 73
ILTSP(S/B/T)MG606 73
ILTSP(S/B/T)X301 32
ILTSP(S/B/T)X302 32
ILTSP(S/B/T)X305 41
ILTSP(S/B/T)X306 41
ILTSP(S/B/T)X361 32
ILTSP(S/B/T)X362 32
ILTSP(S/B/T)X365 41
ILTSP(S/B/T)X366 41
ILTSP(S/B/T)X421 32
ILTSP(S/B/T)X422 32
ILTSP(S/B/T)X425 41
ILTSP(S/B/T)X426 41
ILTSP(S/B/T)(X/XC)303 32
ILTSP(S/B/T)(X/XC)304 37
ILTSP(S/B/T)(X/XC)363 32
ILTSP(S/B/T)(X/XC)364 37
ILTSP(S/B/T)(X/XC)423 32
ILTSP(S/B/T)(X/XC)424 37
ILTSQ(S/B4/T4)SG301 6
ILTSQ(S/B4/T4)SG302 6
ILTSQ(S/B4/T4)SG361 6
ILTSQ(S/B4/T4)SG362 6
ILTSQ(S/B4/T4)SG421 6
ILTSQ(S/B4/T4)SG422 6
ILTSQ(S/B4/T4)SG481 6
ILTSQ(S/B4/T4)SG482 6
ILTSQ(S/B4/T4)SG541 6
ILTSQ(S/B4/T4)SG542 6
ILTSQ(S/B4/T4)SG601 6
ILTSQ(S/B4/T4)SG602 6
pattern no. page
ILTSQ(S/B4/T4)(SG/SC)303 6
ILTSQ(S/B4/T4)(SG/SC)363 6
ILTSQ(S/B4/T4)(SG/SC)364 17
ILTSQ(S/B4/T4)(SG/SC)423 6
ILTSQ(S/B4/T4)(SG/SC)424 17
ILTSQ(S/B4/T4)(SG/SC)483 6
ILTSQ(S/B4/T4)(SG/SC)484 17
ILTSQ(S/B4/T4)(SG/SC)543 6
ILTSQ(S/B4/T4)(SG/SC)544 17
ILTSQ(S/B4/T4)(SG/SC)603 6
ILTSQ(S/B4/T4)(SG/SC)604 17
ILTSQ(S/B/T)MG481 59
ILTSQ(S/B/T)MG482 59
ILTSQ(S/B/T)MG541 59
ILTSQ(S/B/T)MG542 59
ILTSQ(S/B/T)MG601 59
ILTSQ(S/B/T)MG602 59
ILTSQ(S/B/T)(MG/MC)483 59
ILTSQ(S/B/T)(MG/MC)543 59
ILTSQ(S/B/T)(MG/MC)603 59
ILTSQ(S/B/T)X301 29
ILTSQ(S/B/T)X302 29
ILTSQ(S/B/T)X305 39
ILTSQ(S/B/T)X306 39
ILTSQ(S/B/T)X361 29
ILTSQ(S/B/T)X362 29
ILTSQ(S/B/T)X365 39
ILTSQ(S/B/T)X366 39
ILTSQ(S/B/T)X421 29
ILTSQ(S/B/T)X422 29
ILTSQ(S/B/T)X425 39
ILTSQ(S/B/T)X426 39
ILTSQ(S/B/T)(X/XC)303 29
ILTSQ(S/B/T)(X/XC)304 36
ILTSQ(S/B/T)(X/XC)363 29
ILTSQ(S/B/T)(X/XC)364 36
ILTSQ(S/B/T)(X/XC)423 29
ILTSQ(S/B/T)(X/XC)424 36
ILTSR(S/B/T)M108484(H/V)N 84
ILTSR(S/B/T)M108544(H/V)N 84
ILTSR(S/B/T)M108604(H/V)N 84
ILTSR(S/B/T)M120484(H/V)N 84
ILTSR(S/B/T)M120544(H/V)N 84
ILTSR(S/B/T)M120604(H/V)N 84
ILTSR(S/B/T)M132484(H/V)N 85
ILTSR(S/B/T)M132544(H/V)N 85
ILTSR(S/B/T)M132604(H/V)N 85
ILTSR(S/B/T)M144484(H/V)N 85
ILTSR(S/B/T)M144544(H/V)N 85
ILTSR(S/B/T)M144604(H/V)N 85
ILTSR(S/B/T)M156484(H/V)N 85
ILTSR(S/B/T)M156544(H/V)N 85
ILTSR(S/B/T)M156604(H/V)N 85
ILTSR(S/B/T)M180484(H/V)N 85
ILTSR(S/B/T)M180544(H/V)N 85
ILTSR(S/B/T)M180604(H/V)N 85
ILTSR(S/B/T)M216484(H/V)N 85
ILTSR(S/B/T)M216544(H/V)N 85
ILTSR(S/B/T)M216604(H/V)N 85
ILTSR(S/B/T)M96484(H/V)N 84
ILTSR(S/B/T)M96544(H/V)N 84
ILTSR(S/B/T)X108364H 55
ILTSR(S/B/T)X108424H 55
ILTSR(S/B/T)X108484H 55
ILTSR(S/B/T)X120364H 57
pattern no. page
ILTSR(S/B/T)X120364V 56
ILTSR(S/B/T)X120424H 57
ILTSR(S/B/T)X120424V 56
ILTSR(S/B/T)X120484H 57
ILTSR(S/B/T)X120484V 56
ILTSR(S/B/T)X132364H 57
ILTSR(S/B/T)X132364V 56
ILTSR(S/B/T)X132424H 57
ILTSR(S/B/T)X132424V 56
ILTSR(S/B/T)X132484H 57
ILTSR(S/B/T)X132484V 56
ILTSR(S/B/T)X144364H 57
ILTSR(S/B/T)X144364V 56
ILTSR(S/B/T)X144424H 57
ILTSR(S/B/T)X144424V 56
ILTSR(S/B/T)X144484H 57
ILTSR(S/B/T)X144484V 56
ILTSR(S/B/T)X156364H 57
ILTSR(S/B/T)X156364V 56
ILTSR(S/B/T)X156424H 57
ILTSR(S/B/T)X156424V 56
ILTSR(S/B/T)X156484H 57
ILTSR(S/B/T)X156484V 56
ILTSR(S/B/T)X72364H 55
ILTSR(S/B/T)X78364H 55
ILTSR(S/B/T)X78424H 55
ILTSR(S/B/T)X84364H 55
ILTSR(S/B/T)X84424H 55
ILTSR(S/B/T)X90364H 55
ILTSR(S/B/T)X90424H 55
ILTSR(S/B/T)X90484H 55
ILTSR(S/B/T)X96364H 55
ILTSR(S/B/T)X96424H 55
ILTSR(S/B/T)X96484H 55
ILTSS(S/B4/T4)SG301 8
ILTSS(S/B4/T4)SG302 8
ILTSS(S/B4/T4)SG361 8
ILTSS(S/B4/T4)SG362 8
ILTSS(S/B4/T4)SG421 8
ILTSS(S/B4/T4)SG422 8
ILTSS(S/B4/T4)SG481 8
ILTSS(S/B4/T4)SG482 8
ILTSS(S/B4/T4)SG541 8
ILTSS(S/B4/T4)SG542 8
ILTSS(S/B4/T4)SG601 8
ILTSS(S/B4/T4)SG602 8
ILTSS(S/B4/T4)(SG/SC)303 8
ILTSS(S/B4/T4)(SG/SC)363 8
ILTSS(S/B4/T4)(SG/SC)423 8
ILTSS(S/B4/T4)(SG/SC)424 18
ILTSS(S/B4/T4)(SG/SC)483 8
ILTSS(S/B4/T4)(SG/SC)484 18
ILTSS(S/B4/T4)(SG/SC)543 8
ILTSS(S/B4/T4)(SG/SC)544 18
ILTSS(S/B4/T4)(SG/SC)603 8
ILTSS(S/B4/T4)(SG/SC)604 18
ILTSS(S/B/T)MG481 61
ILTSS(S/B/T)MG482 61
ILTSS(S/B/T)MG541 61
ILTSS(S/B/T)MG542 61
ILTSS(S/B/T)MG601 61
ILTSS(S/B/T)MG602 61
ILTSS(S/B/T)(MG/MC)483 61
ILTSS(S/B/T)(MG/MC)484 67
ILTSS(S/B/T)(MG/MC)543 61
Islands Collection by Knoll®
111
pattern no. page
ILTSS(S/B/T)(MG/MC)544 67
ILTSS(S/B/T)(MG/MC)603 61
ILTSS(S/B/T)(MG/MC)604 67
ILTSS(S/B/T)X301 30
ILTSS(S/B/T)X302 30
ILTSS(S/B/T)X305 39
ILTSS(S/B/T)X306 39
ILTSS(S/B/T)X361 30
ILTSS(S/B/T)X362 30
ILTSS(S/B/T)X365 39
ILTSS(S/B/T)X366 39
ILTSS(S/B/T)X421 30
ILTSS(S/B/T)X422 30
ILTSS(S/B/T)X425 39
ILTSS(S/B/T)X426 39
ILTSS(S/B/T)(X/XC)303 30
ILTSS(S/B/T)(X/XC)304 36
ILTSS(S/B/T)(X/XC)363 30
ILTSS(S/B/T)(X/XC)364 36
ILTSS(S/B/T)(X/XC)423 30
ILTSS(S/B/T)(X/XC)424 36
ILTVR(S/B4/T4)(SG/SC)24334 26
ILTVR(S/B4/T4)(SG/SC)30364 26
ILTVS(S/B4/T4)(SG/SC)24334 26
ILTVS(S/B4/T4)(SG/SC)30364 26
Islands Collection by Knoll®
112
This Selling Policy supercedes all previous selling policies. Prices, discounts and product offerings are subject to change without notice.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Terms & Conditions
of SalesSales by Knoll, Inc. or Knoll North America Corp. (‘‘Seller’’) of Knoll Product Lines (hereinafter ‘‘Products’’) within the United States and Canada are made onlyon the terms which are contained in this Selling Policy. Seller hereby gives notice of its objection to any different or additional terms and conditions. This sale isexpressly conditional upon Purchaser’s assent to the terms and conditions set forth below. Additional terms and conditions may apply to KnollStudio andKnollTextiles orders. These terms and conditions may be modified or supplemented only by a written document signed by an authorized representative of Seller.These terms and conditions supercede any prior and/or contemporaneous agreements or correspondence between Purchaser and Seller. Written quotationsexpire thirty (30) days from the date of issuance and can be withdrawn by written notice anytime during that period. Where Purchaser and Seller have enteredinto the Knoll Electronic Terms and Conditions, all orders, acknowledgements, invoices and other business communications placed or transmitted inaccordance with the Knoll Electronic Terms and Conditions shall be deemed to be in writing and signed and shall be valid for all purposes as if they wereoriginated and maintained in documentary form.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Ordering Information All orders must be in writing. The product pattern number(s) contained on Seller’s order acknowledgement shall be the final expression of the order.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Order Confirmation A purchase order is not binding on Seller until Purchaser has received Seller’s order confirmation or acknowledgment.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Pricing Policies List prices are subject to change without notice.List prices shall be those prices in effect on the date of receipt of a complete purchase order unless shipment is requested more than ninety (90) days after orderentry in which case prices in effect on the date of shipment apply. List prices include specified freight costs. Unless specified in writing by Seller, no othercharges are included in Seller’s list prices.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Taxes All sales, use, excise and other taxes applicable to the sale of the Products shall be paid by Purchaser. If Purchaser claims an exemption from any tax,Purchaser shall submit to Seller the appropriate exemption certificates.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Terms of Payment Payment for one hundred percent (100%) of the net order amount is due within thirty (30) days of the date of invoice, which is generally issued upon shipment.In case of any discrepancies, such as shortages, and Seller is notified in writing within ten (10) days of receipt of Product, only that portion may be deductedand the balance paid. For orders greater than $100,000 net, a fifty percent (50%) deposit is due at the time of order placement, with the remainder due withinthirty (30) days of the date of invoice.KnollStudio orders less than $2,000 require payment for one hundred percent (100%) of the net order amount (including any applicable sales tax and chargesfor inside delivery, special packaging, etc.), due at time of order placement. For KnollStudio orders greater than $2,000, a one-half (50%) deposit is due at timeof order placement with the remainder (including any applicable sales tax and charges for inside delivery, special packaging, etc.) due prior to shipment.If, in the judgment of Seller, Purchaser’s financial condition does not justify the terms of the payment, Seller may require full or partial payment in advance.Past due accounts shall be charged one and one-half percent (1.5%) per month, or the highest rate permitted by law, whichever is less, and will be added to theoutstanding balance. In the event Purchaser defaults on payment, Purchaser shall be liable for all collection costs, including reasonable attorney’s fees andcosts.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Changes andCancellation
Purchase orders may not be changed or cancelled, in whole or in part, without prior written consent of Seller. Changes may effect delivery dates. Expensesincurred because of changes shall be charged to Purchaser. In the event of cancellations, Purchaser will be liable for reasonable cancellation chargesestablished by Seller. Orders for special Product, orders including ‘‘COM’’ (hereinafter defined) material and orders pursuant to expedited delivery programs,may not be canceled.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Freight Prepaid Freight is prepaid and included in the price of all Products, except KnollTextiles, within the 48 contiguous United States for orders placed with Knoll, Inc. andwithin Canada, excluding the Yukon, Northwest Territories, Nunavut and Newfoundland for orders placed with Knoll North America Corp. Packing is tested forrigorous motion and transportation but is not guaranteed to protect furniture from all conditions. If special packaging is required for any reason, please consultwith your sales representative or dealer. Seller shall select the method of shipment and routing. Freight for all KnollTextiles orders is prepaid and added to theinvoice.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Delivery/Freight Charges Shipments outside the contiguous 48 United States and Canada shall be shipped F.O.B. Origin.For shipments outside the contiguous United States and Canada, Purchaser is responsible for the cost of freight from point of embarkation, including anyhandling and transportation charges incidental to loading at the point of departure and unloading at the final destination.Conditions beyond the control of Seller, including weather, available facilities and traffic conditions, may affect exact time of delivery. Seller shall not beresponsible for specific carrier delivery date or time unless it has made a specific delivery commitment, in writing.Nonstandard methods of shipment and/or additional services are available upon request. Purchaser will be billed for the differential cost of any special servicesin excess of standard surface carrier freight costs. Premium charges, at Purchaser’s request, will be added for airfreight, exclusive use of vehicle and extra,export or special packaging. Accessorial charges will be added for inside delivery, extra labor, reconsignment and redelivery.Partial shipments may be made and invoiced by Seller.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Claims All shipments for Knoll Products within the contiguous United States and Canada are F.O.B. Origin. All risk of loss passes to Purchaser at time of delivery tocarrier. Purchaser shall inspect all Products upon receipt and notify Seller within ten (10) working days after receipt of any damage or defects which are, orshould be, apparent from an inspection of the Product and its packaging. Failure of Purchaser to notify Seller during the ten (10) working day period shallconstitute acceptance of the Products and waiver of any apparent defects, errors or shortages. For all claims relating to Product damaged in transit or for anyother claims relating to or arising out of the transportation of the Product, Purchaser must seek recovery from the carrier and Seller has no liability to Purchaserfor such claims. Seller may, upon request, assist Purchaser with filing of such claims with the carrier, but Seller will not be liable for any of these transportationrelated claims.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Seller’s Security Interest Until Seller receives the full payment for the Product, Seller shall have a security interest in the Product. Purchaser agrees to perform all acts, including but notlimited to the execution and filing of documentation, which may be necessary to perfect and assure the security interest of Seller.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Returns The return of Products without a written authorization by Seller shall not be accepted. To receive authorization for Product return, please call Customer Service.All Products that are returned pursuant to a valid authorization shall be subject to a twenty-five percent (25%) of list restocking charge. Products not currentlyoffered for sale by Seller (including COM) shall not be authorized for return. All returned Products must be unused, in original condition and in the originalSeller packing cartons. No refund or credit shall be given for damaged Products.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Held Orders/Storage If Purchaser requests that an order be held or delayed, prices and terms and conditions in effect at the time of shipment shall apply. If Purchaser requests adelay after the time when Seller can defer production, Purchaser will be invoiced for the Product, payable in accordance with standard terms, when the order isready for shipment. Seller may transfer the Product to storage, in which case all expenses incurred in connection with storage, including demurrage, preparationfor storage, storage charges and handling shall be payable by Purchaser upon submission of invoices by Seller. Risk of loss to the Product shall pass to thePurchaser upon delivery of the Product into storage.
Selling Policy
113March 15, 2020
Customer’s Own Material A Purchaser who requests a fabric or other surface material not standard to Seller’s line of Products (‘‘COM’’) must submit samples of the requested material toSeller prior to entry of a purchaser order. Seller shall determine if the material is suitable to its manufacturing processes and meets any requirements ofUnderwriters Laboratories. If the COM is acceptable, Seller will then establish a price for using the COM or the Product in question. For a description of theprocedures for submitting samples and testing, contact customer resources or your sales representative. Seller shall have no responsibility for the appearance,condition, performance, durability, colorfastness or any other physical attribute of the COM. Purchaser shall indemnify and hold Seller harmless for anydamages, injuries or losses arising out of or related to use of the COM on the Product.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Warranty Seller warrants to the original Purchaser only that the Products Seller manufactures and sells to Purchaser are free of defects in workmanship and materials,during the applicable warranty period set forth below.Warranty period set forth below is for 24-hour, 7 days a week, multi shift use (includes parts and labor to repair).Should any failure to conform with this limited warranty appear to a Product listed below during the applicable warranty period from the date of shipment, Sellershall, upon prompt written notice, repair or replace, at its option and costs, the affected part or parts.Product and Period of WarrantyLifetime: Antenna Workspaces, AutoStrada, Calibre, Crinion Open Table, Currents, Dividends Horizon, Morrison, Reff Profiles laminate, Rockwell Unscripted,Series 2 Storage, Template, Quoin and other non-wood components (except cascade edge worksurfaces, operational parts, controls, electrical, Lighting, Series 2Veneer Front Storage, digital locks, uphostery, textiles and leathers, special or custom products, see below), Islands Collection table structure, legs, andlaminate worksurfaces.12 Years: Chadwick, Generation by Knoll, k. task, Life, Moment, MultiGeneration by Knoll, Ollo, ReGeneration by Knoll, Remix, and Toboggan seating (exceptseating upholstery, textiles, leathers and finishes, see below).10 Years: Anchor Storage except digital locks, Antenna Workspaces, AutoStrada, Crinion Open Table, Dividends Horizon, Dividends Horizon Satellite Surfaces,Reff Profiles, Rockwell Unscripted, Quoin wood components, Template wood components, Series 2 Veneer Front Storage, cascade edge worksurfaces, WoodCasegoods (The Graham Collection) (except wood casegoods upholstered surfaces, see below), Reuter overheads, Reuter vertical storage, KnollExtra SapperMonitor Arm Collection, Sapper XYZ Monitor Arm Series, Adjustable keyboard mechanisms and platforms, Communication Boards (except fabric boardtextiles, cork and FilzFelt, see below), Smokador collection (except leathers, see below), Orchestra Universal Systems Accessories, k. lounge structuralcomponents, KnollStudio Pixel and Propeller, Tone bases and k.screens.5 Years: Operational parts, controls, electrical, Lighting (except light ballasts, bulbs and power supply, see below), special or custom product, wood veneerproducts and plywood, Currents handcrank, KnollStudio, Rockwell Unscripted wire bases, Spark Series seating structural elements, structural elements of allKnollStudio outdoor products including all Richard Schultz designed products, KnollExtra CPU holders and all universal storage drawers and Power Collection,k. bench (except changes in finish, see below) and k. stand bases (except changes in finish, see below), Islands Collection veneer worksurfaces, operationalparts, wide grommet lid, castors, glides and electrical.3 Years: Rockwell Unscripted upholstery (except textiles and leather), Office Seating upholstery, textiles, leathers and finishes. Fabric boards textiles andSmokador Collection leathers, KnollExtra Pop Up Screens.2 Years: Anchor Storage digital locks, Quoin digital locks, all other KnollExtra product and KnollTextiles Ultrasuede.1 Year: Light ballasts, bulbs and power supply, seating upholstered armpads and soft armpads, wood casegoods upholstered surfaces. KnollStudio, outdoorproduct finishes, k. lounge upholstery and k. lounge fabric. Rockwell Unscripted fabric and accessories, Spinneybeck leathers, and KnollTextiles upholsteryexcept Ultrasuede.This warranty does not apply to:• Damage caused by a carrier other than the Seller.• Normal wear and tear or acts or omissions of parties other than Seller (including user modification, improper use or installation of Products).• COM or other third party materials applied to Products.• Products not installed by or under the auspices of a Knoll Dealer.• Dramatic temperature variations or exposure to unusual conditions.• Changes in surface finishes, including colorfastness due to aging or exposure to light.• Except as specifically noted above, textiles and upholstery supplied by KnollTextiles and Spinneybeck FilzFelt (consult current price lists for applicable
warranties).Natural variations occurring in wood, marble, and leather shall not be considered defects, and the Seller does not guarantee the colorfastness or matching of thecolors, grains or textures, or surface hardness of such materials. The Seller also does not guarantee the colorfastness of fiberglass panel surfaces.THE EXPRESS WARRANTIES CONTAINED HEREIN ARE IN LIEU OF ALL OTHER WARRANTIES, EXPRESS OR IMPLIED, INCLUDING ANYWARRANTIES OF MERCHANTABILITY AND FITNESS FOR PARTICULAR PURPOSE AND ALL OTHER WARRANTIES ARISING FROM COURSE OFDEALING OR USAGE OF TRADE.The remedies provided above are the Purchaser’s sole remedies for any failure of Seller to comply with its obligations regarding the workmanship of itsProducts. Correction of any nonconformity in the manner and for the period of time provided shall constitute complete fulfillment of all liabilities of Seller, withrespect to or arising out of the Product furnished hereunder.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Delay/Force Majeure Seller shall not be liable for failure to perform or for delay in performance due to fire, flood, strike or other labor difficulty, act of God, act of war or terrorism, actof any governmental authority or of the Purchaser, riot, embargo, fuel or energy shortage, wrecks or delay in transportation, inability to obtain necessary labor,materials or manufacturing facilities from usual sources or failure of suppliers to meet their contractual obligations, or due to any cause beyond its reasonablecontrol. If any such event occurs, Seller may extend delivery dates by a period of time necessary to overcome the effect of such delay, allocate available Productor cancel any purchase order.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Compliance with Law PURCHASER IS SOLELY RESPONSIBLE FOR COMPLIANCE WITH ALL APPLICABLE FEDERAL, STATE AND LOCAL LAWS, ORDINANCES,REGULATIONS, RULES AND STANDARDS RELATING TO THE INSTALLATION, MAINTENANCE, USE AND OPERATION OF THE PRODUCTS.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Patents Subject to the following provisions, Seller shall, at its own expense, defend or, at its option, settle any claim, suit or proceeding brought against the Purchaser,and/or its vendees, mediate and immediate, so far as based on an allegation that any Product or any part thereof furnished hereunder constitutes a direct or acontributory infringement of any claim of any patent of the United States or Canada. This obligation shall be effective only if Purchaser shall have made allpayments then due hereunder and if Seller is notified promptly in writing and given authority, information and assistance for the defense of said claim, suit orproceeding. Seller shall pay all damages and costs awarded in such suit or proceedings so defended.The foregoing indemnity does not apply to the following:• Products supplied according to a design other than that of Seller, and which is required by the Purchaser.• Combination of the Product with another product not furnished hereunder unless Seller is a contributory infringer.• Any settlements of a suit or proceeding made without Seller’s written consent.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Limitations of Liability SELLER, ITS CONTRACTORS, AUTHORIZED DEALERS AND SUBCONTRACTORS OR SUPPLIERS OF ANY TIER SHALL NOT BELIABLE TO PURCHASER FOR ANY SPECIAL, INDIRECT, INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING FROM A BREACHOF THIS AGREEMENT.
Selling Policy
114March 15, 2020
Purchaser’s remedies set forth herein are exclusive and the liability of Seller with respect to the breach of this agreement or any contract entered into betweenthe parties pursuant hereto shall not exceed the price of the Product or part on which such liability is based.
Selling Policy
115March 15, 2020
General Ordering Information
The ProductsThis guide encompasses all standard products for this product group.
SizesDimensions listed in this guide are indicated as:H = heightW = widthD = depthDia. = diameterRad. = radius
PricingAll prices shown are list.
How to OrderSelect pattern numbers and quantities required for your complete installation. Product questions can beaddressed in the specific sections of this guide or by contacting your sales representative or customerresource representative at 1-800-343-5665.
Next, select options (if required), along with colors and finishes appropriate to each product. Reference theFinishes and Fabrics pages for color designations.
On large installations, an item’s ‘‘designated area’’ can be specified to assist in product organization andhandling.
To expedite complete / correct entry of your order, be certain all pattern numbers, quantities, colors andarea identifications are completely specified. Also, include complete purchase order numbers, bill-to andship-to addresses, a contact name and specific factory shipping dates required.
Mail all orders to:Knoll, Inc.1235 Water StreetP.O. Box 157East Greenville, PA 18041Attention: Order Entry
Once your order is entered at Knoll, an acknowledgment will be mailed to you. You will be advised of yourscheduled shipping date within five days of the original acknowledgment. If it is necessary to revise yourorder, please contact your customer resource representative.
Sustainability Statement
Sustainable design is a key component of Knoll’s environmental focus. Our commitment to socialresponsibility and a healthy environment has prompted us to further articulate our longstandingenvironmental programs and, with encouragement and support from our colleagues in the industry, we havere-energized our focus on such ‘‘green’’ initiatives as life cycle analysis and LEED™ certification. Knoll isproud to have contributed to projects that have received LEED certification from the U.S. Green BuildingCouncil.
For the latest information on Knoll products that help our customers achieve LEED certification, log on toknoll.com, click on ‘‘About Knoll’’ and then ‘‘Environmental Focus.’’
115