Islands Collection by Knoll...144 Graphite Pear* ** 145 Zebra* 147 Silverwood 148 Smokewood 149...

Price ListMarch 2020

Islands Collection by Knoll®

Table of Contents

Introduction Knoll and Sustainable Design 2Materials and Finish Options 3

Straight Leg Tables Straight Leg, Occasional Heights 5Straight Leg - Desk Height 16

X-Base Tables X-Base Tables - Occasional Heights 28X-Base Tables - Desk Height 35X-Base Tables - Standing Height 38X-Base Tables - Conference 43

MX Base Tables MX Base Tables - Occasional Heights 58MX Base Tables - Desk Height 66MX Base Tables - Standing Height 70MX Base Tables - Conference 76

Accessories Electrical Units - Drop-in 90Electrical Units - Power Square 93Electrical Units - Clamp-On 96Electrical Units - Offset Clamp-On 98Electrical Units - for Chicago 100Electrical Units - Undermount 104Electrical Units - Wide Channel Desktop Outlets 105Wire Management 107

Alpha-Numeric Index 108

Selling Policy 113

General Ordering Information 115


PLILT12201

Copyright � 2020 Knoll, Inc.All rights reserved.All prices effective 03/15/2020.

Knoll and Sustainable Design

Each year Knoll sets key initiatives in the journey to sustainability. Focused on our impact to people and planet, Knoll reports materialhealth product attributes and sets operational targets to reduce greenhouse gas emissions, waste generation and water use (in our NorthAmerican facilities.)

Material transparency is a core Knoll sustainable design value, enabling us to optimize the design and performance of our products.Our material health program utilizes independent third-party certifications that provide an impartial and trustworthy foundation forindustry-wide transparency. Certification by respected third parties ensures that all manufacturers are held to the same high standards.Knoll certifications include: Forest Stewardship Council (FSC�), Intertek’s Clean Air Program, Business and Institutional FurnitureManufacturer’s Association (BIFMA) LEVEL� certification, International Living Future Institute’s (ILFI) Declare labelling and CertifiedEnvironmental Product Declarations. In addition, Knoll is aligned with the U.S. Green Building Council and can help organizationsachieve credits for Leadership in Energy and Environmental Design (LEED�), WELL and the Living Building Challenge (LBC) buildingcertifications.

In our manufacturing operations, we focus on efficiency and impact. Knoll Office and Knoll Europe manufacturing locations are ISO14001:2015 certified. Knoll sets objectives and targets to reduce energy, water and waste. These initiatives are part of a long-termstrategy to further reduce energy consumption and lower our carbon footprint.

We also believe in helping our customers find viable options when decommissioning furniture or other related assets. ANEW’s FullCircle Program, in partnership with Knoll, allows customers to leverage buy-back and re-sale programs as well as explore options forrepurposing or recycling that mitigate landfill impact through energy-from-waste conversion.

For more information about Knoll and sustainable design, visit www.knoll.com/environment.

2

Materials and Finish Options

For specific product applications for eachfinish refer to the finish matrix on the followingpages.

KNOLL CORE LAMINATESSolid Colors111 Jet Black* **114 Folkstone Grey* **115 Medium Grey* **117 Soft Grey* **118 Bright White* **119 Pumice* **128 Fog* **

Patterned121 Micro Grey122 Brushed Sand123 Brushed Grey129 Micro Sand

Wood Grain124 Medium Cherry* **125 Natural Maple* **126 Natural Cherry* **127 Walnut* **139 Light Ash* **140 Warm Ash* **141 Whitened Ash*142 Grey Ash* **143 Classic Oak* **144 Graphite Pear* **145 Zebra*147 Silverwood**148 Smokewood**149 Barnwood**

*Matching edgeband available**Melamine worksurface finish

POLISHED FINISHPD ChromeAL Aluminum

KNOLL CORE PAINTS111T Jet Black112T Brown113T Dark Grey114T Folkstone Grey115T Medium Grey116T Sandstone117T Soft Grey118T Bright White611T Beige Mist Metallic612T Medium Metallic Grey613T Silver

EDGE OPTIONS FOR LAMINATEWORKSURFACESSPLY Ply Edge Synthetic (L pricing)

GRAIN DIRECTIONHorizontal (H)Vertical (V):

Grain direction applies to wood grain laminates,techwoods and natural veneers.

IslandsCollectionbyKnoll

3

Materials and Finish Options

Wood FinishesCodes begin with a three digit numeric sequence, followed by a letter suffix. Each letter suffix (A-F) represents a different combination of pore fill options andgloss levels.

Code V1 TECHWOOD

638 Blond Maple628 Dark Mahogany639 Light Cherry641 Black Oak506 Maple509 Cherry512 Medium Walnut513 Medium Teak514 Espresso637 Natural644 Light Walnut645 Dove Grey

Code V2 PREMIUM TECHWOOD

647 White Pine640 Ebony642 Grigio

V2 Natural Veneer020 Natural Oak038 Rustic Walnut017 Light Walnut002 Bronze Cherry006 Maple021 Peacock Green Walnut022 Old English Walnut037 Birch

Code V3 PREMIUM VENEER

039 Pippy Oak044 Figured Sycamore

Gloss Level Fill LevelA Low Gloss Closed PoreB Medium Gloss Closed PoreC High Gloss Closed Pore

D Low Gloss Open PoreE Medium Gloss Open PoreF High Gloss Open Pore

Edge Options for VeneersSYN Complementary SyntheticSPLY Synthetic Ply Edge *

* Ply Edge available on Birch (037) worksurfaces.

Note:For more detailed information on Veneer finishes, please refer to the Wood Finish Matrix on the Knoll.com site.

IslandsCollectionbyKnoll

4

Straight Leg, Occasional Heights12�, 15� and 18� HighRound Tables

description d w h pattern no. L V1 V2 V3

Round Table12� High

30� 30� 12� ILTRD(S/B4/T4)SG301( )( )( )( )( )( )( ) $1,171. $1,369. $1,455. $1,676.36� 36� 12� ILTRD(S/B4/T4)SG361( )( )( )( )( )( )( ) 1,206. 1,404. 1,490. 1,711.42� 42� 12� ILTRD(S/B4/T4)SG421( )( )( )( )( )( )( ) 1,241. 1,439. 1,525. 1,746.48� 48� 12� ILTRD(S/B4/T4)SG481( )( )( )( )( )( )( ) 1,276. 1,474. 1,560. 1,781.54� 54� 12� ILTRD(S/B4/T4)SG541( )( )( )( )( )( )( ) 1,313. 1,525. 1,628. 1,869.60� 60� 12� ILTRD(S/B4/T4)SG601( )( )( )( )( )( )( ) 1,359. 1,587. 1,709. 1,974.

*Available with Glides only.


30� 30� 15� ILTRD(S/B4/T4)SG302( )( )( )( )( )( )( ) 1,196. 1,394. 1,480. 1,701.36� 36� 15� ILTRD(S/B4/T4)SG362( )( )( )( )( )( )( ) 1,231. 1,429. 1,515. 1,736.42� 42� 15� ILTRD(S/B4/T4)SG422( )( )( )( )( )( )( ) 1,266. 1,464. 1,550. 1,771.48� 48� 15� ILTRD(S/B4/T4)SG482( )( )( )( )( )( )( ) 1,301. 1,499. 1,585. 1,806.54� 54� 15� ILTRD(S/B4/T4)SG542( )( )( )( )( )( )( ) 1,338. 1,550. 1,653. 1,894.60� 60� 15� ILTRD(S/B4/T4)SG602( )( )( )( )( )( )( ) 1,384. 1,612. 1,734. 1,999.



30� 30� 18� ILTRD(S/B4/T4)(SG/SC)303( )( )( )( )( )( )( ) 1,196. 1,394. 1,480. 1,701.36� 36� 18� ILTRD(S/B4/T4)(SG/SC)363( )( )( )( )( )( )( ) 1,231. 1,429. 1,515. 1,736.42� 42� 18� ILTRD(S/B4/T4)(SG/SC)423( )( )( )( )( )( )( ) 1,266. 1,464. 1,550. 1,771.48� 48� 18� ILTRD(S/B4/T4)(SG/SC)483( )( )( )( )( )( )( ) 1,301. 1,499. 1,585. 1,806.54� 54� 18� ILTRD(S/B4/T4)(SG/SC)543( )( )( )( )( )( )( ) 1,338. 1,550. 1,653. 1,894.60� 60� 18� ILTRD(S/B4/T4)(SG/SC)603( )( )( )( )( )( )( ) 1,384. 1,612. 1,734. 1,999.

*Available with Glides and Casters.

Order Code

Example: ILTRDSSG301

IL Islands Collection byKnoll�

T TableRD RoundS Edge (S/B4/T4)SG Foot (SG/SC)30 Size1 Height (1/2/3)N Grommet option( ) Grommet finish(114) Worksurface finish(SYN) Edge finish(114) Top plate finish(114) Leg finish

Specification Information

To order please specify patternnumber including:1. Grommet option:

N = None (no grommet)D4 = Narrow slot 4�W (30�, 36�,42�)D8 = Narrow slot 8�W (48� &54�)D12 = Narrow slot 12�W (60�only)S = Power square (All sizesexcept 30�D)

2. Grommet finish:N = Not applicableD4/D8/D12 = B=Black,W=White (textured)S = 111, 114, 115, 117

3. Worksurface finish:L, V1, V2, V3

4. Edge finish:Complementary synthetic

5. Top plate finish:Painted/texturedPolished aluminum

6. Leg finishPainted/texturedPolished aluminum

All Worksurfaces are 1 1/4� thick.

Edges:S = Square EdgeB4 = Thin beveled edge four sidesT4 = Thick beveled edge four sides

*Foot:SG = GlideSC = Caster

Height (to top of worksurface):1 = 12�H2 = 15�H3 = 18�H

Application Notes

The following upcharges apply:Beveled Edge (B4 & T4): $500Casters: $30Grommets D4, D8 & D12: $80Polished finish: $125 (Top plate,leg or both)

All electrical accessories arespecified separately.

Refer to Accessories section forelectrical component pricing.


5

Straight Leg, Occasional Heights12�, 15� and 18� HighSquare Table


Square Table12� High

30� 30� 12� ILTSQ(S/B4/T4)SG301( )( )( )( )( )( ) $1,027. $1,150. $1,206. $1,331.36� 36� 12� ILTSQ(S/B4/T4)SG361( )( )( )( )( )( ) 1,062. 1,185. 1,241. 1,366.42� 42� 12� ILTSQ(S/B4/T4)SG421( )( )( )( )( )( ) 1,094. 1,229. 1,299. 1,441.48� 48� 12� ILTSQ(S/B4/T4)SG481( )( )( )( )( )( ) 1,127. 1,301. 1,386. 1,554.54� 54� 12� ILTSQ(S/B4/T4)SG541( )( )( )( )( )( ) 1,168. 1,356. 1,459. 1,649.60� 60� 12� ILTSQ(S/B4/T4)SG601( )( )( )( )( )( ) 1,213. 1,418. 1,540. 1,755.



30� 30� 15� ILTSQ(S/B4/T4)SG302( )( )( )( )( )( ) 1,052. 1,184. 1,254. 1,396.36� 36� 15� ILTSQ(S/B4/T4)SG362( )( )( )( )( )( ) 1,087. 1,219. 1,289. 1,341.42� 42� 15� ILTSQ(S/B4/T4)SG422( )( )( )( )( )( ) 1,119. 1,254. 1,324. 1,466.48� 48� 15� ILTSQ(S/B4/T4)SG482( )( )( )( )( )( ) 1,152. 1,304. 1,390. 1,552.54� 54� 15� ILTSQ(S/B4/T4)SG542( )( )( )( )( )( ) 1,193. 1,381. 1,484. 1,674.60� 60� 15� ILTSQ(S/B4/T4)SG602( )( )( )( )( )( ) 1,238. 1,443. 1,565. 1,780.



30� 30� 18� ILTSQ(S/B4/T4)(SG/SC)303( )( )( )( )( )( ) 1,052. 1,184. 1,254. 1,396.36� 36� 18� ILTSQ(S/B4/T4)(SG/SC)363( )( )( )( )( )( ) 1,087. 1,219. 1,289. 1,431.42� 42� 18� ILTSQ(S/B4/T4)(SG/SC)423( )( )( )( )( )( ) 1,119. 1,254. 1,324. 1,466.48� 48� 18� ILTSQ(S/B4/T4)(SG/SC)483( )( )( )( )( )( ) 1,152. 1,304. 1,390. 1,552.54� 54� 18� ILTSQ(S/B4/T4)(SG/SC)543( )( )( )( )( )( ) 1,193. 1,381. 1,484. 1,674.60� 60� 18� ILTSQ(S/B4/T4)(SG/SC)603( )( )( )( )( )( ) 1,238. 1,443. 1,565. 1,780.


Order Code



T TableSQ SquareS Edge (S/B4/T4)SG Foot (SG/SC)30 Size1 Height (1/2/3)N Grommet option( ) Grommet finish(114) Worksurface finish(SYN) Edge finish(114) Top plate finish(114) Leg finish













Application Notes





6

Straight Leg, Occasional Heights12�, 15� and 18� HighSquare Table with Curved Corners


Square Table, 12� HighCurved corners

30� 30� 12� ILTSC(S/B4/T4)SG301( )( )( )( )( )( ) $1,027. $1,150. $1,206. $1,331.36� 36� 12� ILTSC(S/B4/T4)SG361( )( )( )( )( )( ) 1,062. 1,185. 1,241. 1,366.42� 42� 12� ILTSC(S/B4/T4)SG421( )( )( )( )( )( ) 1,094. 1,229. 1,299. 1,441.48� 48� 12� ILTSC(S/B4/T4)SG481( )( )( )( )( )( ) 1,127. 1,301. 1,386. 1,554.54� 54� 12� ILTSC(S/B4/T4)SG541( )( )( )( )( )( ) 1,168. 1,356. 1,459. 1,649.60� 60� 12� ILTSC(S/B4/T4)SG601( )( )( )( )( )( ) 1,213. 1,418. 1,540. 1,755.


Square Table, 15� HighCurved corners

30� 30� 15� ILTSC(S/B4/T4)SG302( )( )( )( )( )( ) 1,052. 1,184. 1,254. 1,396.36� 36� 15� ILTSC(S/B4/T4)SG362( )( )( )( )( )( ) 1,087. 1,219. 1,289. 1,431.42� 42� 15� ILTSC(S/B4/T4)SG422( )( )( )( )( )( ) 1,119. 1,254. 1,324. 1,466.48� 48� 15� ILTSC(S/B4/T4)SG482( )( )( )( )( )( ) 1,152. 1,304. 1,390. 1,552.54� 54� 15� ILTSC(S/B4/T4)SG542( )( )( )( )( )( ) 1,193. 1,381. 1,484. 1,674.60� 60� 15� ILTSC(S/B4/T4)SG602( )( )( )( )( )( ) 1,238. 1,443. 1,565. 1,780.


Square Table, 18� HighCurved Corners

30� 30� 18� ILTSC(S/B4/T4)(SG/SC)303( )( )( )( )( )( ) 1,052. 1,184. 1,254. 1,396.36� 36� 18� ILTSC(S/B4/T4)(SG/SC)363( )( )( )( )( )( ) 1,087. 1,219. 1,289. 1,431.42� 42� 18� ILTSC(S/B4/T4)(SG/SC)423( )( )( )( )( )( ) 1,119. 1,254. 1,324. 1,466.48� 48� 18� ILTSC(S/B4/T4)(SG/SC)483( )( )( )( )( )( ) 1,152. 1,304. 1,390. 1,552.54� 54� 18� ILTSC(S/B4/T4)(SG/SC)543( )( )( )( )( )( ) 1,193. 1,381. 1,484. 1,674.60� 60� 18� ILTSC(S/B4/T4)(SG/SC)603( )( )( )( )( )( ) 1,238. 1,443. 1,565. 1,780.


Order Code

Example: ILTSCSSG301


T TableSC Square with Curved

CornersS Edge (S/B4/T4)SG Foot (SG/SC)30 Size1 Height (1/2/3)N Grommet option( ) Grommet finish(114) Worksurface finish(SYN) Edge finish(114) Top plate finish(114) Leg finish









All Worksurfaces are 1 1/4� thick .




Application Notes





7

Straight Leg, Occasional Heights12�, 15� and 18� HighSoft Square Tables


Soft square Table12� High

30� 30� 12� ILTSS(S/B4/T4)SG301( )( )( )( )( )( ) $1,027. $1,150. $1,206. $1,331.36� 36� 12� ILTSS(S/B4/T4)SG361( )( )( )( )( )( ) 1,062. 1,185. 1,241. 1,366.42� 42� 12� ILTSS(S/B4/T4)SG421( )( )( )( )( )( ) 1,094. 1,229. 1,299. 1,441.48� 48� 12� ILTSS(S/B4/T4)SG481( )( )( )( )( )( ) 1,127. 1,301. 1,386. 1,554.54� 54� 12� ILTSS(S/B4/T4)SG541( )( )( )( )( )( ) 1,168. 1,356. 1,459. 1,649.60� 60� 12� ILTSS(S/B4/T4)SG601( )( )( )( )( )( ) 1,213. 1,418. 1,540. 1,755.



30� 30� 15� ILTSS(S/B4/T4)SG302( )( )( )( )( )( ) 1,052. 1,184. 1,254. 1,396.36� 36� 15� ILTSS(S/B4/T4)SG362( )( )( )( )( )( ) 1,087. 1,219. 1,289. 1,431.42� 42� 15� ILTSS(S/B4/T4)SG422( )( )( )( )( )( ) 1,119. 1,254. 1,324. 1,466.48� 48� 15� ILTSS(S/B4/T4)SG482( )( )( )( )( )( ) 1,152. 1,304. 1,390. 1,552.54� 54� 15� ILTSS(S/B4/T4)SG542( )( )( )( )( )( ) 1,193. 1,381. 1,484. 1,674.60� 60� 15� ILTSS(S/B4/T4)SG602( )( )( )( )( )( ) 1,238. 1,443. 1,565. 1,780.



30� 30� 18� ILTSS(S/B4/T4)(SG/SC)303( )( )( )( )( )( ) 1,052. 1,184. 1,254. 1,396.36� 36� 18� ILTSS(S/B4/T4)(SG/SC)363( )( )( )( )( )( ) 1,087. 1,219. 1,289. 1,431.42� 42� 18� ILTSS(S/B4/T4)(SG/SC)423( )( )( )( )( )( ) 1,119. 1,254. 1,324. 1,466.48� 48� 18� ILTSS(S/B4/T4)(SG/SC)483( )( )( )( )( )( ) 1,152. 1,254. 1,324. 1,466.54� 54� 18� ILTSS(S/B4/T4)(SG/SC)543( )( )( )( )( )( ) 1,193. 1,381. 1,484. 1,674.60� 60� 18� ILTSS(S/B4/T4)(SG/SC)603( )( )( )( )( )( ) 1,238. 1,443. 1,565. 1,780.


Example: ILTSSSSG301


T TableSS Soft SquareS Edge (S/B4/T4)SG Foot (SG/SC)30 Size1 Height (1/2/3)N Grommet option( ) Grommet finish(114) Worksurface finish(SYN) Edge finish(114) Top plate finish(114) Leg finish

Specification Notes












Application Notes





8

Straight Leg, Occasional Heights12�, 15� and 18� HighSoft Pentagon Tables


Soft pentagon Tables12� High

36� 36� 12� ILTPT(S/B4/T4)SG361( )( )( )( )( )( ) $1,412. $1,607. $1,692. $1,924.42� 42� 12� ILTPT(S/B4/T4)SG421( )( )( )( )( )( ) 1,447. 1,642. 1,727. 1,959.48� 48� 12� ILTPT(S/B4/T4)SG481( )( )( )( )( )( ) 1,482. 1,677. 1,762. 1,994.54� 54� 12� ILTPT(S/B4/T4)SG541( )( )( )( )( )( ) 1,517. 1,712. 1,797. 2,029.60� 60� 12� ILTPT(S/B4/T4)SG601( )( )( )( )( )( ) 1,558. 1,767. 1,870. 2,124.



36� 36� 15� ILTPT(S/B4/T4)SG362( )( )( )( )( )( ) 1,497. 1,692. 1,777. 2,009.42� 42� 15� ILTPT(S/B4/T4)SG422( )( )( )( )( )( ) 1,532. 1,727. 1,812. 2,044.48� 48� 15� ILTPT(S/B4/T4)SG482( )( )( )( )( )( ) 1,567. 1,762. 1,847. 2,079.54� 54� 15� ILTPT(S/B4/T4)SG542( )( )( )( )( )( ) 1,608. 1,817. 1,920. 2,174.60� 60� 15� ILTPT(S/B4/T4)SG602( )( )( )( )( )( ) 1,653. 1,879. 2,001. 2,279.



36� 36� 18� ILTPT(S/B4/T4)(SG/SC)363( )( )( )( )( )( ) 1,497. 1,692. 1,777. 2,009.42� 42� 18� ILTPT(S/B4/T4)(SG/SC)423( )( )( )( )( )( ) 1,532. 1,727. 1,812. 2,044.48� 48� 18� ILTPT(S/B4/T4)(SG/SC)483( )( )( )( )( )( ) 1,567. 1,762. 1,847. 2,079.54� 54� 18� ILTPT(S/B4/T4)(SG/SC)543( )( )( )( )( )( ) 1,608. 1,817. 1,920. 2,174.60� 60� 18� ILTPT(S/B4/T4)(SG/SC)603( )( )( )( )( )( ) 1,653. 1,879. 2,001. 2,279.


Order Code

Example: ILTPTSSG301


T TablePT Soft PentagonS Edge (S/B4/T4)SG Foot (SG/SC)30 Size1 Height (1/2/3)N Grommet option( ) Grommet finish(114) Worksurface finish(SYN) Edge finish(114) Top plate finish(114) Leg finish



N = None (no grommet)D4 = Narrow slot 4�W (36�, 42�)D8 = Narrow slot 8�W (48� &54�)D12 = Narrow slot 12�W (60�only)S = Power square (All sizes)










Application Notes





9

Straight Leg, Occasional Heights12�, 15� and 18� HighSoft Pentagon Tables, Type 2


Soft Pentagon TablesType 2, 12� High

48� 48� 12� ILTP2(S/B4/T4)SG481( )( )( )( )( )( ) $1,517. $1,712. $1,797. $2,029.54� 54� 12� ILTP2(S/B4/T4)SG541( )( )( )( )( )( ) 1,558. 1,767. 1,870. 2,124.60� 60� 12� ILTP2(S/B4/T4)SG601( )( )( )( )( )( ) 1,603. 1,829. 1,951. 2,229.



48� 48� 15� ILTP2(S/B4/T4)SG482( )( )( )( )( )( ) 1,567. 1,762. 1,847. 2,079.54� 54� 15� ILTP2(S/B4/T4)SG542( )( )( )( )( )( ) 1,608. 1,817. 1,920. 2,174.60� 60� 15� ILTP2(S/B4/T4)SG602( )( )( )( )( )( ) 1,653. 1,879. 2,001. 2,279.



48� 48� 18� ILTP2(S/B4/T4)(SG/SC)483( )( )( )( )( )( ) 1,567. 1,762. 1,847. 2,079.54� 54� 18� ILTP2(S/B4/T4)(SG/SC)543( )( )( )( )( )( ) 1,608. 1,817. 1,920. 2,174.60� 60� 18� ILTP2(S/B4/T4)(SG/SC)603( )( )( )( )( )( ) 1,653. 1,879. 2,001. 2,279.


Order Code

Example: ILTP2SSG301


T TableP2 Soft Pentagon Type 2S Edge (S/B4/T4)SG Foot (SG/SC)30 Size1 Height (1/2/3)N Grommet option( ) Grommet finish(114) Worksurface finish(SYN) Edge finish(114) Top plate finish(114) Leg finish



N = None (no grommet)D8 = Narrow slot 8�W (48� &54�)D12 = Narrow slot 12�W (60�only)S = Power square (All sizesexcept 30�D)










Application Notes

The following upcharges apply:Beveled Edge (B4 & T4): $500Casters: $30Grommets D8 & D12: $80Polished finish: $175 (Top plate,leg or both)




10

Straight Leg, Occasional Heights12�, 15� and 18� HighOrganic Pentagon Tables, Type A


Organic Pentagon TableType A, 12� High

48� 48� 12� ILTOPA(S/B4/T4)SG481( )( )( )( )( )( ) $1,517. $1,712. $1,797. $2,029.54� 54� 12� ILTOPA(S/B4/T4)SG541( )( )( )( )( )( ) 1,558. 1,767. 1,870. 2,124.60� 60� 12� ILTOPA(S/B4/T4)SG601( )( )( )( )( )( ) 1,603. 1,829. 1,951. 2,229.



48� 48� 15� ILTOPA(S/B4/T4)SG482( )( )( )( )( )( ) 1,567. 1,762. 1,847. 2,079.54� 54� 15� ILTOPA(S/B4/T4)SG542( )( )( )( )( )( ) 1,608. 1,817. 1,920. 2,174.60� 60� 15� ILTOPA(S/B4/T4)SG602( )( )( )( )( )( ) 1,653. 1,879. 2,001. 2,279.



48� 48� 18� ILTOPA(S/B4/T4)(SG/SC)483( )( )( )( )( )( ) 1,567. 1,762. 1,847. 2,079.54� 54� 18� ILTOPA(S/B4/T4)(SG/SC)543( )( )( )( )( )( ) 1,608. 1,817. 1,920. 2,174.60� 60� 18� ILTOPA(S/B4/T4)(SG/SC)603( )( )( )( )( )( ) 1,653. 1,879. 2,001. 2,279.


Order Code

Example: ILTOPASSG301


T TableOPA Organic pentagon Type

AS Edge (S/B4/T4)SG Foot (SG/SC)30 Size1 Height (1/2/3)N Grommet option( ) Grommet finish(114) Worksurface finish(SYN) Edge finish(114) Top plate finish(114) Leg finish

Specification Notes



2. Grommet finish:N = Not applicableD8/D12 = B=Black, W=White(textured)S = 111, 114, 115, 117









Application Notes





11

Straight Leg, Occasional Heights12�, 15� and 18� HighOrganic Pentagon Tables, Type B


Organic Pentagon TableType B, 12� High

48� 48� 12� ILTOPB(S/B4/T4)SG481( )( )( )( )( )( ) $1,517. $1,712. $1,797. $2,029.54� 54� 12� ILTOPB(S/B4/T4)SG541( )( )( )( )( )( ) 1,558. 1,767. 1,870. 2,124.60� 60� 12� ILTOPB(S/B4/T4)SG601( )( )( )( )( )( ) 1,603. 1,829. 1,951. 2,229.



48� 48� 15� ILTOPB(S/B4/T4)SG482( )( )( )( )( )( ) 1,567. 1,762. 1,847. 2,079.54� 54� 15� ILTOPB(S/B4/T4)SG542( )( )( )( )( )( ) 1,608. 1,817. 1,920. 2,174.60� 60� 15� ILTOPB(S/B4/T4)SG602( )( )( )( )( )( ) 1,653. 1,879. 2,001. 2,279.



48� 48� 18� ILTOPB(S/B4/T4)(SG/SC)483( )( )( )( )( )( ) 1,567. 1,762. 1,847. 2,079.54� 54� 18� ILTOPB(S/B4/T4)(SG/SC)543( )( )( )( )( )( ) 1,608. 1,817. 1,920. 2,174.60� 60� 18� ILTOPB(S/B4/T4)(SG/SC)603( )( )( )( )( )( ) 1,653. 1,879. 2,001. 2,279.


Order Code

Example: ILTOPBSSG301


T TableOPB Organic Pentagon Type

BS Edge (S/B4/T4)SG Foot (SG/SC)30 Size1 Height (1/2/3)N Grommet option( ) Grommet finish(114) Worksurface finish(SYN) Edge finish(114) Top plate finish(114) Leg finish













Application Notes





12

Straight Leg, Occasional Heights12�, 15� and 18� HighOrganic Triangle Tables, Left and Right


Organic triangle Table12� High

Left hand shown

36� 44� 12� ILTOT(L/R)(S/B4/T4)SG36441( )( )( )( )( )( ) $1,269. $1,448. $1,512. $1,718.42� 51� 12� ILTOT(L/R)(S/B4/T4)SG42511( )( )( )( )( )( ) 1,306. 1,498. 1,578. 1,804.48� 59� 12� ILTOT(L/R)(S/B4/T4)SG48591( )( )( )( )( )( ) 1,352. 1,560. 1,660. 1,911.54� 66� 12� ILTOT(L/R)(S/B4/T4)SG54661( )( )( )( )( )( ) 1,401. 1,625. 1,747. 2,024.60� 74� 12� ILTOT(L/R)(S/B4/T4)SG60741( )( )( )( )( )( ) 1,459. 1,704. 1,851. 2,154.



Left hand shown

36� 44� 15� ILTOT(L/R)(S/B4/T4)SG36442( )( )( )( )( )( ) 1,294. 1,473. 1,537. 1,743.42� 51� 15� ILTOT(L/R)(S/B4/T4)SG42512( )( )( )( )( )( ) 1,331. 1,523. 1,603. 1,829.48� 59� 15� ILTOT(L/R)(S/B4/T4)SG48592( )( )( )( )( )( ) 1,377. 1,585. 1,685. 1,936.54� 66� 15� ILTOT(L/R)(S/B4/T4)SG54662( )( )( )( )( )( ) 1,426. 1,650. 1,772. 2,049.60� 74� 15� ILTOT(L/R)(S/B4/T4)SG60742( )( )( )( )( )( ) 1,484. 1,729. 1,876. 2,184.



Left hand shown

36� 44� 18� ILTOT(L/R)(S/B4/T4)(SG/SC)36443( )( )( )( )( )( ) 1,294. 1,473. 1,537. 1,743.42� 51� 18� ILTOT(L/R)(S/B4/T4)(SG/SC)42513( )( )( )( )( )( ) 1,331. 1,523. 1,603. 1,829.48� 59� 18� ILTOT(L/R)(S/B4/T4)(SG/SC)48593( )( )( )( )( )( ) 1,377. 1,585. 1,685. 1,936.54� 66� 18� ILTOT(L/R)(S/B4/T4)(SG/SC)54663( )( )( )( )( )( ) 1,426. 1,650. 1,772. 2,049.60� 74� 18� ILTOT(L/R)(S/B4/T4)(SG/SC)60743( )( )( )( )( )( ) 1,484. 1,729. 1,876. 2,184.


Order Code

Example: ILTOTLSSG36441


T TableOT Organic TriangleL Left hand, (R=Right)S Edge (S/B4/T4)SG Foot (SG/SC)36 Depth44 Width1 Height (1/2/3)N Grommet option( ) Grommet finish(114) Worksurface finish(SYN) Edge finish(114) Top plate finish(114) Leg finish



N = None (no grommet)D8 = Narrow slot 8�W (48� &54�)D12 = Narrow slot 12�W (60�only)S = Power square (All sizes)










Application Notes





13

Straight Leg, Occasional Heights12�, 15� and 18� HighOrganic Elongated Pentagon Tables, Left and Right


Organic elongatd pentagonTable, 12� High

Left hand shown

35� 60� 12� ILTOE(L/R)(S/B4/T4)SG35601( )( )( )( )( )( )( ) $1,303. $1,494. $1,573. $1,797.39� 66� 12� ILTOE(L/R)(S/B4/T4)SG39661( )( )( )( )( )( )( ) 1,335. 1,537. 1,629. 1,870.42� 72� 12� ILTOE(L/R)(S/B4/T4)SG42721( )( )( )( )( )( )( ) 1,365. 1,577. 1,683. 1,940.45� 78� 12� ILTOE(L/R)(S/B4/T4)SG45781( )( )( )( )( )( )( ) 1,397. 1,620. 1,740. 2,015.48� 84� 12� ILTOE(L/R)(S/B4/T4)SG48841( )( )( )( )( )( )( ) 1,432. 1,667. 1,802. 2,095.



Left hand shown

35� 60� 15� ILTOE(L/R)(S/B4/T4)SG35602( )( )( )( )( )( )( ) 1,328. 1,519. 1,598. 1,822.39� 66� 15� ILTOE(L/R)(S/B4/T4)SG39662( )( )( )( )( )( )( ) 1,360. 1,562. 1,654. 1,895.42� 72� 15� ILTOE(L/R)(S/B4/T4)SG42722( )( )( )( )( )( )( ) 1,390. 1,602. 1,708. 1,965.45� 78� 15� ILTOE(L/R)(S/B4/T4)SG45782( )( )( )( )( )( )( ) 1,422. 1,645. 1,765. 2,040.48� 84� 15� ILTOE(L/R)(S/B4/T4)SG48842( )( )( )( )( )( )( ) 1,457. 1,692. 1,827. 2,120.



Left hand shown

35� 60� 18� ILTOE(L/R)(S/B4/T4)(SG/SC)35603( )( )( )( )( )( )( ) 1,328. 1,519. 1,598. 1,822.39� 66� 18� ILTOE(L/R)(S/B4/T4)(SG/SC)39663( )( )( )( )( )( )( ) 1,360. 1,562. 1,654. 1,895.42� 72� 18� ILTOE(L/R)(S/B4/T4)(SG/SC)42723( )( )( )( )( )( )( ) 1,390. 1,602. 1,708. 1,965.45� 78� 18� ILTOE(L/R)(S/B4/T4)(SG/SC)45783( )( )( )( )( )( )( ) 1,422. 1,645. 1,765. 2,040.48� 84� 18� ILTOE(L/R)(S/B4/T4)(SG/SC)48843( )( )( )( )( )( )( ) 1,457. 1,692. 1,827. 2,120.


Order Code

Example: ILTOELSSG35601


T TableOE Organic Elongated

PentagonL Left Hand, (R=Right)S Edge (S/B4/T4)SG Foot (SG/SC)35 Depth60 Width1 Height (1/2/3)N Grommet option( ) Grommet finish(114) Worksurface finish(SYN) Edge finish(114) Top plate finish(114) Leg finish



N = None (no grommet)D12 = Narrow slot 12�W (60�only)S = Power square (All sizes)All grommets are centered on theworksurfaces.

2. Grommet finish:N = Not applicableD12 = B=Black, W=White(textured)S = 111, 114, 115, 117









Application Notes

The following upcharges apply:Beveled Edge (B4 & T4): $500Casters: $30Grommets D12: $80Polished finish: $125 (Top plate,leg or both)




14

Straight Leg, Occasional Heights12�, 15� and 18� HighOrganic Rectangle Table, Left and Right


Organic rectangle Table12� High

Left hand shown

33� 60� 12� ILTOR(L/R)(S/B4/T4)SG33601( )( )( )( )( )( )( ) $1,295. $1,483. $1,559. $1,779.33� 72� 12� ILTOR(L/R)(S/B4/T4)SG33721( )( )( )( )( )( )( ) 1,321. 1,519. 1,606. 1,840.39� 60� 12� ILTOR(L/R)(S/B4/T4)SG39601( )( )( )( )( )( )( ) 1,319. 1,516. 1,601. 1,834.39� 72� 12� ILTOR(L/R)(S/B4/T4)SG39721( )( )( )( )( )( )( ) 1,350. 1,558. 1,657. 1,907.



Left hand shown

33� 60� 15� ILTOR(L/R)(S/B4/T4)SG33602( )( )( )( )( )( )( ) 1,320. 1,508. 1,584. 1,804.33� 72� 15� ILTOR(L/R)(S/B4/T4)SG33722( )( )( )( )( )( )( ) 1,346. 1,544. 1,631. 1,865.39� 60� 15� ILTOR(L/R)(S/B4/T4)SG39602( )( )( )( )( )( )( ) 1,344. 1,541. 1,626. 1,859.39� 72� 15� ILTOR(L/R)(S/B4/T4)SG39722( )( )( )( )( )( )( ) 1,375. 1,583. 1,682. 1,932.



Left hand shown

33� 60� 18� ILTOR(L/R)(S/B4/T4)(SG/SC)33603( )( )( )( )( )( )( ) 1,320. 1,508. 1,584. 1,804.33� 72� 18� ILTOR(L/R)(S/B4/T4)(SG/SC)33723( )( )( )( )( )( )( ) 1,346. 1,544. 1,631. 1,865.39� 60� 18� ILTOR(L/R)(S/B4/T4)(SG/SC)39603( )( )( )( )( )( )( ) 1,344. 1,541. 1,626. 1,859.39� 72� 18� ILTOR(L/R)(S/B4/T4)(SG/SC)39723( )( )( )( )( )( )( ) 1,375. 1,583. 1,682. 1,932.


Order Code

Example: ILTORLSSG36441


T TableOR Organic RectangleL Left hand, (R=Right)S Edge (S/B4/T4)SG Foot (SG/SC)33 Depth60 Width1 Height (1/2/3)N Grommet option( ) Grommet finish(114) Worksurface finish(SYN) Edge finish(114) Top plate finish(114) Leg finish



N = None (no grommet)D8 = Narrow slot 8�W (48� &54�)S = Power square (All sizes)All grommets are center on theworksurface.










Application Notes





15

Straight Leg - Desk Height29� HighRound Tables



48� 48� 29� ILTRD(S/B4/T4)(SG/SC)484( )( )( )( )( )( )( ) $1,351. $1,549. $1,635. $1,856.54� 54� 29� ILTRD(S/B4/T4)(SG/SC)544( )( )( )( )( )( )( ) 1,388. 1,600. 1,703. 1,944.60� 60� 29� ILTRD(S/B4/T4)(SG/SC)604( )( )( )( )( )( )( ) 1,434. 1,662. 1,784. 2,049.


Order Code



T TableRD RoundS Edge (S/B4/T4)SG Foot (SG/SC)48 Size4 29� HighN Grommet option( ) Grommet finish(114) Worksurface finish(SYN) Edge finish(114) Top plate finish(114) Leg finish












Height 29� is to top of worksurface.

Application Notes





16

Straight Leg - Desk Height29� HighSquare Tables with Square and Curved Corners



36� 36� 29� ILTSQ(S/B4/T4)(SG/SC)364( )( )( )( )( )( )( ) $1,137. $1,260. $1,316. $1,391.42� 42� 29� ILTSQ(S/B4/T4)(SG/SC)424( )( )( )( )( )( )( ) 1,169. 1,304. 1,374. 1,466.48� 48� 29� ILTSQ(S/B4/T4)(SG/SC)484( )( )( )( )( )( )( ) 1,202. 1,376. 1,461. 1,579.54� 54� 29� ILTSQ(S/B4/T4)(SG/SC)544( )( )( )( )( )( )( ) 1,243. 1,431. 1,534. 1,674.60� 60� 29� ILTSQ(S/B4/T4)(SG/SC)604( )( )( )( )( )( )( ) 1,288. 1,493. 1,615. 1,780.


Square Table with curved corners29� High

36� 36� 29� ILTSC(S/B4/T4)(SG/SC)364( )( )( )( )( )( )( ) 1,137. 1,260. 1,316. 1,391.42� 42� 29� ILTSC(S/B4/T4)(SG/SC)424( )( )( )( )( )( )( ) 1,169. 1,304. 1,374. 1,466.48� 48� 29� ILTSC(S/B4/T4)(SG/SC)484( )( )( )( )( )( )( ) 1,202. 1,376. 1,461. 1,579.54� 54� 29� ILTSC(S/B4/T4)(SG/SC)544( )( )( )( )( )( )( ) 1,243. 1,431. 1,534. 1,674.60� 60� 29� ILTSC(S/B4/T4)(SG/SC)604( )( )( )( )( )( )( ) 1,288. 1,493. 1,615. 1,780.


Order Code

Example: ILTSQSSG364

IL Island Collection byKnoll�

T TableSQ Square,

SC=Square with Curvedcorners

S Edge (S/B4/T4)SG Foot (SG/SC)36 Size4 29� HighN Grommet option( ) Grommet finish(114) Worksurface finish(SYN) Edge finish(114) Top plate finish(114) Leg finish



N = None (no grommet)D4 = Narrow slot 4�W (36�, 42�)D8 = Narrow slot 8�W (48� &54�)D12 = Narrow slot 12�W (60�only)S = Power square (All sizesexcept 30�D)All grommets are centered on theworksurface.










Application Notes

The following upcharges apply:Beveled Edge (B4 & T4): $650 forSquare TableBeveled Edge (B4 & T4): $500 forSoft Square TableCasters: $30Grommets D4, D8 & D12: $80Polished finish: $225 (Top plate,leg or both)




17

Straight Leg - Desk Height29� HighSoft Square Tables


Soft Square Table29� High

42� 42� 29� ILTSS(S/B4/T4)(SG/SC)424( )( )( )( )( )( )( ) $1,169. $1,304. $1,374. $1,516.48� 48� 29� ILTSS(S/B4/T4)(SG/SC)484( )( )( )( )( )( )( ) 1,207. 1,354. 1,440. 1,602.54� 54� 29� ILTSS(S/B4/T4)(SG/SC)544( )( )( )( )( )( )( ) 1,243. 1,431. 1,534. 1,724.60� 60� 29� ILTSS(S/B4/T4)(SG/SC)604( )( )( )( )( )( )( ) 1,288. 1,493. 1,615. 1,830.


Example: ILTSSSSG424

IL Island Collection byKnoll�

T TableSS Soft SquareS Edge (S/B4/T4)SG Foot (SG/SC)42 Size4 29� HighN Grommet option( ) Grommet finish(114) Worksurface finish(SYN) Edge finish(114) Top plate finish(114) Leg finish

Specification Notes


N = None (no grommet)D4 = Narrow slot 4�W (42� only)D8 = Narrow slot 8�W (48� &54�)D12 = Narrow slot 12�W (60�only)S = Power square (All sizes)All grommets are centered on theworksurface.










Application Notes





18

Straight Leg - Desk Height29� HighSoft Pentagon and Soft Pentagon Type 2 Tables


Soft Pentagon Table29� High

48� 48� 29� ILTPT(S/B4/T4)(SG/SC)484( )( )( )( )( )( ) $1,642. $1,837. $1,922. $2,154.54� 54� 29� ILTPT(S/B4/T4)(SG/SC)544( )( )( )( )( )( ) 1,683. 1,892. 1,995. 2,249.60� 60� 29� ILTPT(S/B4/T4)(SG/SC)604( )( )( )( )( )( ) 1,728. 1,954. 2,076. 2,354.



48� 48� 29� ILTP2(S/B4/T4)(SG/SC)484( )( )( )( )( )( ) 1,642. 1,837. 1,922. 2,154.54� 54� 29� ILTP2(S/B4/T4)(SG/SC)544( )( )( )( )( )( ) 1,683. 1,892. 1,995. 2,249.60� 60� 29� ILTP2(S/B4/T4)(SG/SC)604( )( )( )( )( )( ) 1,728. 1,892. 1,995. 2,249.


Order Code

Example: ILTPTSSG484


T TablePT Soft PentagonS Edge (S/B4/T4)SG Foot (SG/SC)48 Size4 29� HighN Grommet option( ) Grommet finish(114) Worksurface finish(SYN) Edge finish(114) Top plate finish(114) Leg finish



N = None (no grommet)D8 = Narrow slot 8�W (48� &54�)D12 = Narrow slot 12�W (60�only)S = Power square (All sizes)All grommets are centered on theworksurface.










Application Notes





19

Straight Leg - Desk Height29� HighOrganic Pentagon Type A and B



48� 48� 29� ILTOPA(S/B4/T4)(SG/SC)484( )( )( )( )( )( ) $1,642. $1,837. $1,922. $2,154.54� 54� 29� ILTOPA(S/B4/T4)(SG/SC)544( )( )( )( )( )( ) 1,683. 1,892. 1,995. 2,249.60� 60� 29� ILTOPA(S/B4/T4)(SG/SC)604( )( )( )( )( )( ) 1,728. 1,954. 2,076. 2,354.



48� 48� 29� ILTOPB(S/B4/T4)(SG/SC)484( )( )( )( )( )( ) 1,642. 1,837. 1,922. 2,154.54� 54� 29� ILTOPB(S/B4/T4)(SG/SC)544( )( )( )( )( )( ) 1,683. 1,892. 1,995. 2,249.60� 60� 29� ILTOPB(S/B4/T4)(SG/SC)604( )( )( )( )( )( ) 1,728. 1,954. 2,076. 2,354.


Order Code

Example: ILTOPASSG484


T TableOPA Organic Pentagon Type

AS Edge (S/B4/T4)SG Foot (SG/SC)48 Size4 29� HighN Grommet option( ) Grommet finish(114) Worksurface finish(SYN) Edge finish(114) Top plate finish(114) Leg finish



N = None (no grommet)D8 = Narrow slot 8�W (48� &54�)D12 = Narrow slot 12�W (60�only)S = Power square (All sizes)All grommets are centered on theworksurface.










Application Notes





20

Straight Leg - Desk Height29� HighOrganic Triangle, Left and Right



Left hand shown

36� 44� 29� ILTOT(L/R)(S/B4/T4)(SG/SC)36444( )( )( )( )( )( ) $1,344. $1,523. $1,587. $1,793.42� 51� 29� ILTOT(L/R)(S/B4/T4)(SG/SC)42514( )( )( )( )( )( ) 1,381. 1,573. 1,653. 1,879.48� 59� 29� ILTOT(L/R)(S/B4/T4)(SG/SC)48594( )( )( )( )( )( ) 1,427. 1,635. 1,735. 1,986.54� 66� 29� ILTOT(L/R)(S/B4/T4)(SG/SC)54664( )( )( )( )( )( ) 1,476. 1,700. 1,822. 2,099.60� 74� 29� ILTOT(L/R)(S/B4/T4)(SG/SC)60744( )( )( )( )( )( ) 1,534. 1,779. 1,926. 2,234.



Order Code

Example: ILTOTLSSG36444


T TableOT Organic TriangleL Left hand (R=Right

hand)S Edge (S/B4/T4)SG Foot (SG/SC)36 Depth44 Width4 29� HighN Grommet option( ) Grommet finish(114) Worksurface finish(SYN) Edge finish(114) Top plate finish(114) Leg finish



N = None (no grommet)D8 = Narrow slot 8�W (3644,4251)D12 = Narrow slot 12�W (4859,5460, 6074)S = Power square (All sizes)All grommets are centered on theworksurface.










Application Notes





21

Straight Leg - Desk Height29� HighOrganic Elongated Pentagon, Left and Right



Left hand shown

35� 60� 29� ILTOE(L/R)(S/B4/T4)(SG/SC)35604( )( )( )( )( )( )( ) $1,378. $1,569. $1,648. $1,872.39� 66� 29� ILTOE(L/R)(S/B4/T4)(SG/SC)39664( )( )( )( )( )( )( ) 1,410. 1,612. 1,704. 1,945.42� 72� 29� ILTOE(L/R)(S/B4/T4)(SG/SC)42724( )( )( )( )( )( )( ) 1,440. 1,652. 1,758. 2,015.42� 72� 29� ILTOE(L/R)(S/B4/T4)(SG/SC)45784( )( )( )( )( )( )( ) 1,472. 1,695. 1,815. 2,090.48� 84� 29� ILTOE(L/R)(S/B4/T4)(SG/SC)48844( )( )( )( )( )( )( ) 1,507. 1,742. 1,877. 2,170.


Order Code

Example: ILTOELSSG35604


T TableOE Organic Elongated

PentagonL Left hand (R=Right

hand)S Edge (S/B4/T4)SG Foot (SG/SC)35 Depth60 Width4 271/2� HighN Grommet option( ) Grommet finish(114) Worksurface finish(SYN) Edge finish(114) Top plate finish(114) Leg finish



N = None (no grommet)D12 = Narrow slot 12�W (Allsizes)S = Power square (All sizes)

2. Grommet Location:CB = Centered Back Edge (Shortedge)CF = Centered Front Edge (Longedge)










Application Notes





22

Straight Leg - Desk Height29� HighOrganic Rectangle, Left and Right



Left hand shown

33� 60� 29� ILTOR(L/R)(S/B4/T4)(SG/SC)33604( )( )( )( )( )( )( ) $1,370. $1,558. $1,634. $1,854.33� 72� 29� ILTOR(L/R)(S/B4/T4)(SG/SC)33724( )( )( )( )( )( )( ) 1,396. 1,594. 1,681. 1,915.39� 60� 29� ILTOR(L/R)(S/B4/T4)(SG/SC)39604( )( )( )( )( )( )( ) 1,394. 1,591. 1,676. 1,909.39� 72� 29� ILTOR(L/R)(S/B4/T4)(SG/SC)39724( )( )( )( )( )( )( ) 1,425. 1,633. 1,732. 1,982.


Order Code

Example: ILTORLSSG33604


T TableOR Organic RectangleL Left hand (R=Right

hand)S Edge (S/B4/T4)SG Foot (SG/SC)33 Depth60 Width4 29� HighN Grommet option( ) Grommet finish(114) Worksurface finish(SYN) Edge finish(114) Top plate finish(114) Leg finish



N = None (no grommet)D8 = Narrow slot 8�W (All sizes)S = Power square (All sizes)

2. Grommet location:CB = Centered Back Edge (Shortedge)CF = Centered Front Edge (Longedge)










Application Notes





23

Straight Leg - Desk Height29� HighRectilinear Tables with Square Corners


Rectilnear Table withsquare corners

24� 48� 29� ILTRL(S/B4/T4)(SG/SC)48244( )( )( )( )( )( )( ) $1,125. $1,216. $1,264. $1,373.54� 29� ILTRL(S/B4/T4)(SG/SC)54244( )( )( )( )( )( )( ) 1,137. 1,229. 1,282. 1,397.60� 29� ILTRL(S/B4/T4)(SG/SC)60244( )( )( )( )( )( )( ) 1,148. 1,243. 1,300. 1,420.66� 29� ILTRL(S/B4/T4)(SG/SC)66244( )( )( )( )( )( )( ) 1,162. 1,281. 1,346. 1,480.72� 29� ILTRL(S/B4/T4)(SG/SC)72244( )( )( )( )( )( )( ) 1,173. 1,294. 1,363. 1,502.78� 29� ILTRL(S/B4/T4)(SG/SC)78244( )( )( )( )( )( )( ) 1,184. 1,308. 1,381. 1,525.78� 29� ILTRL(S/B4/T4)(SG/SC)84244( )( )( )( )( )( )( ) 1,197. 1,351. 1,428. 1,586.

30� 48� 29� ILTRL(S/B4/T4)(SG/SC)48304( )( )( )( )( )( )( ) 1,148. 1,423. 1,300. 1,420.54� 29� ILTRL(S/B4/T4)(SG/SC)54304( )( )( )( )( )( )( ) 1,162. 1,260. 1,323. 1,450.60� 29� ILTRL(S/B4/T4)(SG/SC)60304( )( )( )( )( )( )( ) 1,176. 1,278. 1,345. 1,479.66� 29� ILTRL(S/B4/T4)(SG/SC)66304( )( )( )( )( )( )( ) 1,192. 1,318. 1,394. 1,542.72� 29� ILTRL(S/B4/T4)(SG/SC)72304( )( )( )( )( )( )( ) 1,206. 1,335. 1,416. 1,571.78� 29� ILTRL(S/B4/T4)(SG/SC)78304( )( )( )( )( )( )( ) 1,219. 1,351. 1,438. 1,599.84� 29� ILTRL(S/B4/T4)(SG/SC)84304( )( )( )( )( )( )( ) 1,234. 1,397. 1,488. 1,664.

36� 48� 29� ILTRL(S/B4/T4)(SG/SC)48364( )( )( )( )( )( )( ) 1,171. 1,271. 1,336. 1,467.54� 29� ILTRL(S/B4/T4)(SG/SC)54364( )( )( )( )( )( )( ) 1,188. 1,291. 1,363. 1,502.60� 29� ILTRL(S/B4/T4)(SG/SC)60364( )( )( )( )( )( )( ) 1,205. 1,312. 1,390. 1,537.66� 29� ILTRL(S/B4/T4)(SG/SC)66364( )( )( )( )( )( )( ) 1,222. 1,355. 1,442. 1,605.72� 29� ILTRL(S/B4/T4)(SG/SC)72364( )( )( )( )( )( )( ) 1,239. 1,375. 1,469. 1,640.78� 29� ILTRL(S/B4/T4)(SG/SC)78364( )( )( )( )( )( )( ) 1,255. 1,395. 1,495. 1,674.84� 29� ILTRL(S/B4/T4)(SG/SC)84364( )( )( )( )( )( )( ) 1,272. 1,443. 1,549. 1,744.


Order Code

Example: ILTRLSSG48244


T TableRL Rectilinear Square

CornerS Edge (S/B4/T4)SG Foot (SG/SC)48 Width24 Depth4 29� HighN Grommet option( ) Grommet finish(CC) Grommet location(114) Worksurface finish(SYN) Edge finish(114) Top plate finish(114) Leg finish



N = None (no grommet)D12 = Narrow slot 12�W (Allsizes)D30 = Narrow slot 30�W(Available on 60� and 96�w tops)S = Power square (All sizes)


3. Grommet location:CC = Centered/Centered(Centered on both length andwidth)CB = Centered/Back(Centered across the width,recessed from back edge)









Application Notes

The following upcharges apply:Beveled Edge (B4 & T4): $650Casters: $30Grommets D12: $80Grommets D30: $100Polished finish: $225 (Top plate,leg or both)




24

Straight Leg - Desk Height29� HighRectilinear Tables with Curved Corners


Rectilinear Table withCurved corners

24� 48� 29� ILTRC(S/B4/T4)(SG/SC)48244( )( )( )( )( )( )( ) $1,125. $1,396. $1,394. $1,607.54� 29� ILTRC(S/B4/T4)(SG/SC)54244( )( )( )( )( )( )( ) 1,137. 1,409. 1,412. 1,631.60� 29� ILTRC(S/B4/T4)(SG/SC)60244( )( )( )( )( )( )( ) 1,148. 1,423. 1,430. 1,654.66� 29� ILTRC(S/B4/T4)(SG/SC)66244( )( )( )( )( )( )( ) 1,162. 1,448. 1,459. 1,692.72� 29� ILTRC(S/B4/T4)(SG/SC)72244( )( )( )( )( )( )( ) 1,173. 1,462. 1,477. 1,715.72� 29� ILTRC(S/B4/T4)(SG/SC)78244( )( )( )( )( )( )( ) 1,184. 1,475. 1,494. 1,737.84� 29� ILTRC(S/B4/T4)(SG/SC)84244( )( )( )( )( )( )( ) 1,197. 1,523. 1,550. 1,810.

30� 48� 29� ILTRC(S/B4/T4)(SG/SC)48304( )( )( )( )( )( )( ) 1,148. 1,423. 1,430. 1,654.54� 29� ILTRC(S/B4/T4)(SG/SC)54304( )( )( )( )( )( )( ) 1,162. 1,440. 1,453. 1,684.60� 29� ILTRC(S/B4/T4)(SG/SC)60304( )( )( )( )( )( )( ) 1,176. 1,458. 1,475. 1,713.66� 29� ILTRC(S/B4/T4)(SG/SC)66304( )( )( )( )( )( )( ) 1,192. 1,485. 1,507. 1,754.72� 29� ILTRC(S/B4/T4)(SG/SC)72304( )( )( )( )( )( )( ) 1,206. 1,502. 1,529. 1,783.78� 29� ILTRC(S/B4/T4)(SG/SC)78304( )( )( )( )( )( )( ) 1,219. 1,518. 1,551. 1,811.84� 29� ILTRC(S/B4/T4)(SG/SC)84304( )( )( )( )( )( )( ) 1,234. 1,569. 1,610. 1,888.

36� 48� 29� ILTRC(S/B4/T4)(SG/SC)48364( )( )( )( )( )( )( ) 1,171. 1,451. 1,466. 1,701.54� 29� ILTRC(S/B4/T4)(SG/SC)54364( )( )( )( )( )( )( ) 1,188. 1,471. 1,493. 1,736.60� 29� ILTRC(S/B4/T4)(SG/SC)60364( )( )( )( )( )( )( ) 1,205. 1,492. 1,520. 1,771.66� 29� ILTRC(S/B4/T4)(SG/SC)66364( )( )( )( )( )( )( ) 1,222. 1,522. 1,556. 1,818.72� 29� ILTRC(S/B4/T4)(SG/SC)72364( )( )( )( )( )( )( ) 1,239. 1,542. 1,582. 1,852.78� 29� ILTRC(S/B4/T4)(SG/SC)78364( )( )( )( )( )( )( ) 1,255. 1,562. 1,609. 1,887.84� 29� ILTRC(S/B4/T4)(SG/SC)84364( )( )( )( )( )( )( ) 1,272. 1,615. 1,671. 1,967.


Order Code

Example: ILTRCSSG48244


T TableRC Rectilinear with

Curved CornerS Edge (S/B4/T4)SG Foot (SG/SC)48 Width24 Depth4 29� HighN Grommet option( ) Grommet finish(CC) Grommet location(114) Worksurface finish(SYN) Edge finish(114) Top plate finish(114) Leg finish



N = None (no grommet)D12 = Narrow slot 12�W (Allsizes)D30 = Narrow slot 30�W(Available on 60� to 84�w tops)S = Power square (All sizes)


3. Grommet location:CC = Centered/Centered(Centered on both length andwidth)CB = Centered/Back(Centered across the width,recessed from back edge)









Application Notes

The following upcharges apply:Beveled Edge (B4 & T4): $500Casters: $30Grommets D12: $80Grommets D30: $100Polished finish: $225 (Top plate,leg or both)




25

Straight Leg - Desk Height29� High120° Degree Tables


120° Degree Table withSquare corners

24� 33� 29� ILTVS(S/B4/T4)(SG/SC)24334( )( )( )( )( )( )( ) $1,291. $1,452. $1,493. $1,671.30� 36� 29� ILTVS(S/B4/T4)(SG/SC)30364( )( )( )( )( )( )( ) 1,310. 1,477. 1,527. 1,715.


120° Degree Table withCurved corners

24� 33� 29� ILTVR(S/B4/T4)(SG/SC)24334( )( )( )( )( )( )( ) 1,291. 1,452. 1,493. 1,671.30� 36� 29� ILTVR(S/B4/T4)(SG/SC)30364( )( )( )( )( )( )( ) 1,310. 1,477. 1,527. 1,715.


Order Code

Example: ILTVSSSG24334


T TableVS 120° Table with Square

corners(CY=with Curvedcorners)

S Edge (S/B4/T4)SG Foot (SG/SC)24 Depth33 Width4 29� HighN Grommet option( ) Grommet finish(114) Worksurface finish(SYN) Edge finish(114) Top plate finish(114) Leg finish



N = None (no grommet)D8 = Narrow slot 8�W (All sizes)S = Power square










Application Notes





26

Straight Leg - Desk Height29� HighCairo Shaped Tables


Cairo Shaped Table withSquare corners

30� 52� 29� ILTCS(S/B4/T4)(SG/SC)52304( )( )( )( )( )( )( ) $1,342. $1,521. $1,584. $1,789.36� 63� 29� ILTCS(S/B4/T4)(SG/SC)63364( )( )( )( )( )( )( ) 1,389. 1,584. 1,668. 1,898.

Cairo Shaped Table withCurved corners

30� 52� 29� ILTCY(S/B4/T4)(SG/SC)52304( )( )( )( )( )( )( ) 1,342. 1,521. 1,584. 1,789.36� 63� 29� ILTCY(S/B4/T4)(SG/SC)63364( )( )( )( )( )( )( ) 1,389. 1,584. 1,668. 1,898.

Order Code

Example: ILTCSSSG52304


T TableCS Cairo with Square

cornersCY=with Curvedcorners)

S Edge (S/B4/T4)SG Foot (SG/SC)52 Width30 Depth4 29� HighN Grommet option( ) Grommet finish(CC) Grommet location(114) Worksurface finish(SYN) Edge finish(114) Top plate finish(114) Leg finish



N = None (no grommet)D12 = Narrow slot 12�W (Allsizes)S = Power square


3. Grommet location:CB = Centered back edge (shortedge)CF = Centered front edge (longedge)









Application Notes





27

X-Base Tables - Occasional Heights12�, 15� and 18� HighRound Tables



30� 12� ILTRD(S/B/T)X301( )( )( )( )( )( ) $954. $1,121. $1,165. $1,335.36� 12� ILTRD(S/B/T)X361( )( )( )( )( )( ) 982. 1,157. 1,213. 1,397.42� 12� ILTRD(S/B/T)X421( )( )( )( )( )( ) 1,014. 1,200. 1,269. 1,470.



30� 15� ILTRD(S/B/T)X302( )( )( )( )( )( ) 954. 1,121. 1,165. 1,335.36� 15� ILTRD(S/B/T)X362( )( )( )( )( )( ) 982. 1,157. 1,213. 1,397.42� 15� ILTRD(S/B/T)X422( )( )( )( )( )( ) 1,014. 1,200. 1,269. 1,470.



30� 18� ILTRD(S/B/T)(X/XC)303( )( )( )( )( )( ) 954. 1,121. 1,165. 1,335.36� 18� ILTRD(S/B/T)(X/XC)363( )( )( )( )( )( ) 982. 1,157. 1,213. 1,397.42� 18� ILTRD(S/B/T)(X/XC)423( )( )( )( )( )( ) 1,014. 1,200. 1,269. 1,470.


Order Code

Example: ILTRDSX301


T TableRD RoundS Edge (S/B/T)X Foot (X/XC)30 Size1 Height (1/2/3)N Grommet option( ) Grommet finish(114) Worksurface finish(SYN) Edge finish(114) Cone finish(114) Foot finish



N = None (no grommet)D4 = Narrow slot 4�W (36�, 42�)S = Power square (36�, 42�)




5. Cone finish (36� & 42�):Painted/texturedPolished aluminum

6. Column finishPainted/texturedPolished aluminum

7. Foot finishPainted/texturedPolished aluminum


Edges:S = Square EdgeB = Thin beveled edge four sidesT = Thick beveled edge four sides

*Foot:X = GlideXC = Caster


Application Notes

The following upcharges apply:Beveled Edge (B4 & T4): $500Casters: $30Grommets D4: $80Polished finish: $100 (Cone,Column, Foot or all)




28

X-Base Tables - Occasional Heights12�, 15� and 18� HighSquare Tables



30� 12� ILTSQ(S/B/T)X301( )( )( )( )( )( ) $809. $924. $968. $1,078.36� 12� ILTSQ(S/B/T)X361( )( )( )( )( )( ) 837. 960. 1,016. 1,141.42� 12� ILTSQ(S/B/T)X421( )( )( )( )( )( ) 869. 1,004. 1,074. 1,216.



30� 15� ILTSQ(S/B/T)X302( )( )( )( )( )( ) 809. 924. 968. 1,078.36� 15� ILTSQ(S/B/T)X362( )( )( )( )( )( ) 837. 960. 1,016. 1,141.42� 15� ILTSQ(S/B/T)X422( )( )( )( )( )( ) 869. 1,004. 1,074. 1,216.



30� 18� ILTSQ(S/B/T)(X/XC)303( )( )( )( )( )( ) 809. 924. 968. 1,078.36� 18� ILTSQ(S/B/T)(X/XC)363( )( )( )( )( )( ) 837. 960. 1,016. 1,141.42� 18� ILTSQ(S/B/T)(X/XC)423( )( )( )( )( )( ) 869. 1,004. 1,074. 1,216.


Order Code

Example: ILTSQSX301


T TableSQ SquareS Edge (S/B/T)X Foot (X/XC)30 Size1 Height (1/2/3)N Grommet option( ) Grommet finish(114) Worksurface finish(SYN) Edge finish(114) Cone finish(114) Foot finish














Application Notes





29

X-Base Tables - Occasional Heights12�, 15� and 18� HighSoft Square Tables



30� 12� ILTSS(S/B/T)X301( )( )( )( )( )( ) $809. $924. $968. $1,078.36� 12� ILTSS(S/B/T)X361( )( )( )( )( )( ) 837. 960. 1,016. 1,141.42� 12� ILTSS(S/B/T)X421( )( )( )( )( )( ) 869. 1,004. 1,074. 1,216.



30� 15� ILTSS(S/B/T)X302( )( )( )( )( )( ) 809. 924. 968. 1,078.36� 15� ILTSS(S/B/T)X362( )( )( )( )( )( ) 837. 960. 1,016. 1,141.42� 15� ILTSS(S/B/T)X422( )( )( )( )( )( ) 869. 1,004. 1,074. 1,216.



30� 18� ILTSS(S/B/T)(X/XC)303( )( )( )( )( )( ) 809. 924. 968. 1,078.36� 18� ILTSS(S/B/T)(X/XC)363( )( )( )( )( )( ) 837. 960. 1,016. 1,141.42� 18� ILTSS(S/B/T)(X/XC)423( )( )( )( )( )( ) 869. 1,004. 1,074. 1,216.


Order Code

Example: ILTSSSX301


T TableSS Soft SquareS Edge (S/B/T)X Foot (X/XC)30 Size1 Height (1/2/3)N Grommet option( ) Grommet finish(114) Worksurface finish(SYN) Edge finish(114) Cone finish(114) Foot finish














Application Notes





30

X-Base Tables - Occasional Heights12�, 15� and 18� HighSquare Tables with Curved Corners



30� 12� ILTSC(S/B/T)X301( )( )( )( )( )( ) $809. $924. $968. $1,078.36� 12� ILTSC(S/B/T)X361( )( )( )( )( )( ) 837. 960. 1,016. 1,141.42� 12� ILTSC(S/B/T)X421( )( )( )( )( )( ) 869. 1,004. 1,074. 1,216.



30� 15� ILTSC(S/B/T)X302( )( )( )( )( )( ) 809. 924. 968. 1,078.36� 15� ILTSC(S/B/T)X362( )( )( )( )( )( ) 837. 960. 1,016. 1,141.42� 15� ILTSC(S/B/T)X422( )( )( )( )( )( ) 869. 1,004. 1,074. 1,216.



30� 18� ILTSC(S/B/T)(X/XC)303( )( )( )( )( )( ) 809. 924. 968. 1,078.36� 18� ILTSC(S/B/T)(X/XC)363( )( )( )( )( )( ) 837. 960. 1,016. 1,141.42� 18� ILTSC(S/B/T)(X/XC)423( )( )( )( )( )( ) 869. 1,004. 1,074. 1,216.


Order Code

Example: ILTSCSX301


T TableSC Square table with curved

cornersS Edge (S/B/T)X Foot (X/XC)30 Size1 Height (1/2/3)N Grommet option( ) Grommet finish(114) Worksurface finish(SYN) Edge finish(114) Cone finish(114) Foot finish














Application Notes





31

X-Base Tables - Occasional Heights12�, 15� and 18� HighSoft Pentagon



30� 12� ILTSP(S/B/T)X301( )( )( )( )( )( ) $998. $1,161. $1,205. $1,387.36� 12� ILTSP(S/B/T)X361( )( )( )( )( )( ) 1,024. 1,197. 1,252. 1,448.42� 12� ILTSP(S/B/T)X421( )( )( )( )( )( ) 1,056. 1,239. 1,308. 1,520.



30� 15� ILTSP(S/B/T)X302( )( )( )( )( )( ) 998. 1,161. 1,205. 1,387.36� 15� ILTSP(S/B/T)X362( )( )( )( )( )( ) 1,024. 1,197. 1,252. 1,448.42� 15� ILTSP(S/B/T)X422( )( )( )( )( )( ) 1,056. 1,239. 1,308. 1,520.



30� 18� ILTSP(S/B/T)(X/XC)303( )( )( )( )( )( ) 998. 1,161. 1,205. 1,387.36� 18� ILTSP(S/B/T)(X/XC)363( )( )( )( )( )( ) 1,024. 1,197. 1,252. 1,448.42� 18� ILTSP(S/B/T)(X/XC)423( )( )( )( )( )( ) 1,056. 1,239. 1,308. 1,520.


Order Code

Example: ILTSPSX301


T TableSP Soft PentagonS Edge (S/B/T)X Foot (X/XC)30 Size1 Height (1/2/3)N Grommet option( ) Grommet finish(114) Worksurface finish(SYN) Edge finish(114) Cone finish(114) Foot finish














Application Notes





32

X-Base Tables - Occasional Heights12�, 15� and 18� HighOrganic Pentagon Type A



30� 30� 12� ILTOPA(S/B/T)X301( )( )( )( )( )( )( ) $998. $1,161. $1,205. $1,387.36� 36� 12� ILTOPA(S/B/T)X361( )( )( )( )( )( )( ) 1,024. 1,197. 1,252. 1,448.42� 42� 12� ILTOPA(S/B/T)X421( )( )( )( )( )( )( ) 1,056. 1,239. 1,308. 1,520.



30� 30� 15� ILTOPA(S/B/T)X302( )( )( )( )( )( )( ) 998. 1,161. 1,205. 1,387.36� 36� 15� ILTOPA(S/B/T)X362( )( )( )( )( )( )( ) 1,024. 1,197. 1,252. 1,448.42� 42� 15� ILTOPA(S/B/T)X422( )( )( )( )( )( )( ) 1,056. 1,239. 1,308. 1,520.



30� 30� 18� ILTOPA(S/B/T)(X/XC)303( )( )( )( )( )( )( ) 998. 1,161. 1,205. 1,387.36� 36� 18� ILTOPA(S/B/T)(X/XC)363( )( )( )( )( )( )( ) 1,024. 1,197. 1,252. 1,448.42� 42� 18� ILTOPA(S/B/T)(X/XC)423( )( )( )( )( )( )( ) 1,056. 1,239. 1,308. 1,520.


Order Code

Example: ILTOPASX301



AS Edge (S/B/T)X Foot (X/XC)30 Size1 Height (1/2/3)N Grommet option( ) Grommet finish(114) Worksurface finish(SYN) Edge finish(114) Cone finish(114) Foot finish














Application Notes





33

X-Base Tables - Occasional Heights12�, 15� and 18� HighOrganic Pentagon Type B



30� 30� 12� ILTOPB(S/B/T)X301( )( )( )( )( )( )( ) $998. $1,161. $1,205. $1,387.36� 36� 12� ILTOPB(S/B/T)X361( )( )( )( )( )( )( ) 1,024. 1,197. 1,252. 1,448.42� 42� 12� ILTOPB(S/B/T)X421( )( )( )( )( )( )( ) 1,056. 1,239. 1,308. 1,520.



30� 30� 15� ILTOPB(S/B/T)X302( )( )( )( )( )( )( ) 998. 1,161. 1,205. 1,387.36� 36� 15� ILTOPB(S/B/T)X362( )( )( )( )( )( )( ) 1,024. 1,197. 1,252. 1,448.42� 42� 15� ILTOPB(S/B/T)X422( )( )( )( )( )( )( ) 1,056. 1,239. 1,308. 1,520.



30� 30� 18� ILTOPB(S/B/T)(X/XC)303( )( )( )( )( )( )( ) 998. 1,161. 1,205. 1,387.36� 36� 18� ILTOPB(S/B/T)(X/XC)363( )( )( )( )( )( )( ) 1,024. 1,197. 1,252. 1,448.42� 42� 18� ILTOPB(S/B/T)(X/XC)423( )( )( )( )( )( )( ) 1,056. 1,239. 1,308. 1,520.


Order Code

Example: ILTOPBSX301



BS Edge (S/B/T)X Foot (X/XC)30 Size1 Height (1/2/3)N Grommet option( ) Grommet finish(114) Worksurface finish(SYN) Edge finish(114) Cone finish(114) Foot finish














Application Notes





34

X-Base Tables - Desk Height29� HighRound Tables



30� 30� 29� ILTRD(S/B/T)(X/XC)304( )( )( )( )( )( )( ) $979. $1,146. $1,190. $1,360.36� 36� 29� ILTRD(S/B/T)(X/XC)364( )( )( )( )( )( )( ) 1,007. 1,182. 1,238. 1,422.42� 42� 29� ILTRD(S/B/T)(X/XC)424( )( )( )( )( )( )( ) 1,039. 1,225. 1,294. 1,495.


Order Code

Example: ILTRDSX304


T TableRD RoundS Edge (S/B/T)X Foot (X/XC)30 Width4 29� HighN Grommet option( ) Grommet finish(114) Worksurface finish(SYN) Edge finish(114) Cone finish(114) Column finish(114) Foot finish







5. Cone finish:Painted/texturedPolished aluminum

6. Column finish:Painted/texturedPolished aluminum






Application Notes





35

X-Base Tables - Desk Height29� HighSquare, Soft Square and Square with Curved Corners Tables



30� 29� ILTSQ(S/B/T)(X/XC)304( )( )( )( )( )( ) $834. $949. $993. $1,103.36� 29� ILTSQ(S/B/T)(X/XC)364( )( )( )( )( )( ) 862. 985. 1,041. 1,166.42� 29� ILTSQ(S/B/T)(X/XC)424( )( )( )( )( )( ) 894. 1,029. 1,099. 1,241.



30� 29� ILTSS(S/B/T)(X/XC)304( )( )( )( )( )( ) 834. 949. 993. 1,103.36� 29� ILTSS(S/B/T)(X/XC)364( )( )( )( )( )( ) 862. 985. 1,041. 1,166.42� 29� ILTSS(S/B/T)(X/XC)424( )( )( )( )( )( ) 894. 1,029. 1,099. 1,241.



30� 29� ILTSC(S/B/T)(X/XC)304( )( )( )( )( )( ) 834. 949. 993. 1,103.36� 29� ILTSC(S/B/T)(X/XC)364( )( )( )( )( )( ) 862. 985. 1,041. 1,166.42� 29� ILTSC(S/B/T)(X/XC)424( )( )( )( )( )( ) 894. 1,029. 1,099. 1,241.


Order Code

Example: ILTSQSX304


T TableSQ Square

SS=Soft SquareS Edge (S/B/T)X Foot (X/XC)30 Width / Depth4 29� HighN Grommet option( ) Grommet finish(114) Worksurface finish(SYN) Edge finish(114) Cone finish(114) Column finish(114) Foot finish














Application Notes

The following upcharges apply:Beveled Edge (B4 & T4): $650 forSquare TableBeveled Edge (B4 & T4): $500 forSoft Square TableCasters: $30Grommets D4: $80Polished finish: $100 (Cone,Column, Foot or all)




36

X-Base Tables - Desk Height29� HighSoft Pentagon, Organic Pentagon Type A and B



30� 29� ILTSP(S/B/T)(X/XC)304( )( )( )( )( )( ) $1,023. $1,186. $1,230. $1,412.36� 29� ILTSP(S/B/T)(X/XC)364( )( )( )( )( )( ) 1,049. 1,222. 1,277. 1,473.42� 29� ILTSP(S/B/T)(X/XC)424( )( )( )( )( )( ) 1,081. 1,264. 1,333. 1,545.



30� 29� ILTOPA(S/B/T)(X/XC)304( )( )( )( )( )( ) 1,023. 1,186. 1,230. 1,412.36� 29� ILTOPA(S/B/T)(X/XC)364( )( )( )( )( )( ) 1,049. 1,222. 1,277. 1,473.42� 29� ILTOPA(S/B/T)(X/XC)424( )( )( )( )( )( ) 1,081. 1,264. 1,333. 1,545.



30� 29� ILTOPB(S/B/T)(X/XC)304( )( )( )( )( )( ) 1,023. 1,186. 1,230. 1,412.36� 29� ILTOPB(S/B/T)(X/XC)364( )( )( )( )( )( ) 1,049. 1,222. 1,277. 1,473.42� 29� ILTOPB(S/B/T)(X/XC)424( )( )( )( )( )( ) 1,081. 1,264. 1,333. 1,545.


Order Code

Example: ILTSPSX304


T TableSP Soft Pentagon

OPA=Organic PentagonType AOPB=Organic PentagonType B

S Edge (S/B/T)X Foot (X/XC)30 Width4 29� HighN Grommet option( ) Grommet finish(114) Worksurface finish(SYN) Edge finish(114) Cone finish(114) Column finish(114) Foot finish














Application Notes





37

X-Base Tables - Standing Height36� and 42� HighRound Tables



30� 30� 36� ILTRD(S/B/T)X305( )( )( )( )( )( )( ) $1,004. $1,171. $1,215. $1,385.36� 36� 36� ILTRD(S/B/T)X365( )( )( )( )( )( )( ) 1,032. 1,207. 1,263. 1,447.42� 42� 36� ILTRD(S/B/T)X425( )( )( )( )( )( )( ) 1,064. 1,250. 1,319. 1,520.



30� 30� 42� ILTRD(S/B/T)X306( )( )( )( )( )( )( ) 1,004. 1,171. 1,215. 1,385.36� 36� 42� ILTRD(S/B/T)X366( )( )( )( )( )( )( ) 1,032. 1,207. 1,263. 1,447.42� 42� 42� ILTRD(S/B/T)X426( )( )( )( )( )( )( ) 1,064. 1,250. 1,319. 1,520.


Order Code

Example: ILTRDSX305


T TableRD RoundS Edge (S/B/T)X Foot (X/XC)30 Width5 36� High, 6=42� HighN Grommet option( ) Grommet finish(114) Worksurface finish(SYN) Edge finish(114) Cone finish(114) Column finish(114) Foot finish












*Foot:X = Glide

Height 36� and 42� is to top ofworksurface.

Application Notes





38

X-Base Tables - Standing Height36� and 42� HighSquare and Soft Square Tables



30� 36� ILTSQ(S/B/T)X305( )( )( )( )( )( )( ) $859. $974. $1,018. $1,128.36� 36� ILTSQ(S/B/T)X365( )( )( )( )( )( )( ) 887. 1,010. 1,066. 1,191.42� 36� ILTSQ(S/B/T)X425( )( )( )( )( )( )( ) 919. 1,054. 1,124. 1,266.



30� 42� ILTSQ(S/B/T)X306( )( )( )( )( )( )( ) 859. 974. 1,018. 1,128.36� 42� ILTSQ(S/B/T)X366( )( )( )( )( )( )( ) 887. 1,010. 1,066. 1,191.42� 42� ILTSQ(S/B/T)X426( )( )( )( )( )( )( ) 919. 1,054. 1,124. 1,266.



30� 36� ILTSS(S/B/T)X305( )( )( )( )( )( )( ) 859. 974. 1,018. 1,128.36� 36� ILTSS(S/B/T)X365( )( )( )( )( )( )( ) 887. 1,010. 1,066. 1,191.42� 36� ILTSS(S/B/T)X425( )( )( )( )( )( )( ) 919. 1,054. 1,124. 1,266.



30� 42� ILTSS(S/B/T)X306( )( )( )( )( )( )( ) 859. 974. 1,018. 1,128.36� 42� ILTSS(S/B/T)X366( )( )( )( )( )( )( ) 887. 1,010. 1,066. 1,191.42� 42� ILTSS(S/B/T)X426( )( )( )( )( )( )( ) 919. 1,054. 1,124. 1,266.


Order Code

Example: ILTSQSX305


T TableSQ Square

SS=Soft SquareS Edge (S/B/T)X Foot30 Width / Depth5 36� High, 6=42� HighN Grommet option( ) Grommet finish(114) Worksurface finish(SYN) Edge finish(114) Cone finish(114) Column finish(114) Foot finish












*Foot:X= Glide


Application Notes





39

X-Base Tables - Standing Height36� and 42� HighSquare Tables with Curved Corners



30� 36� ILTSC(S/B/T)X305( )( )( )( )( )( )( ) $859. $974. $1,018. $1,128.36� 36� ILTSC(S/B/T)X365( )( )( )( )( )( )( ) 887. 1,010. 1,066. 1,191.42� 36� ILTSC(S/B/T)X425( )( )( )( )( )( )( ) 919. 1,054. 1,124. 1,266.



30� 42� ILTSC(S/B/T)X306( )( )( )( )( )( )( ) 859. 974. 1,018. 1,128.36� 42� ILTSC(S/B/T)X366( )( )( )( )( )( )( ) 887. 1,010. 1,066. 1,191.42� 42� ILTSC(S/B/T)X426( )( )( )( )( )( )( ) 919. 1,054. 1,124. 1,266.


Order Code

Example: ILTSCSX305


T TableSC Square with curved

cornersS Edge (S/B/T)X Foot30 Width / Depth5 36� High, 6=42� HighN Grommet option( ) Grommet finish(114) Worksurface finish(SYN) Edge finish(114) Cone finish(114) Column finish(114) Foot finish












*Foot:X= Glide


Application Notes





40

X-Base Tables - Standing Height36� and 42� HighSoft Pentagon



30� 36� ILTSP(S/B/T)X305( )( )( )( )( )( ) $1,048. $1,211. $1,255. $1,437.36� 36� ILTSP(S/B/T)X365( )( )( )( )( )( ) 1,074. 1,247. 1,302. 1,498.42� 36� ILTSP(S/B/T)X425( )( )( )( )( )( ) 1,106. 1,289. 1,358. 1,570.



30� 42� ILTSP(S/B/T)X306( )( )( )( )( )( ) 1,048. 1,211. 1,255. 1,437.36� 42� ILTSP(S/B/T)X366( )( )( )( )( )( ) 1,074. 1,247. 1,302. 1,498.42� 42� ILTSP(S/B/T)X426( )( )( )( )( )( ) 1,106. 1,289. 1,358. 1,570.


Order Code

Example: ILTSPSX305


T TableSP Soft PentagonS Edge (S/B/T)X Foot30 Width5 36� High, 6=42� HighN Grommet option( ) Grommet finish(114) Worksurface finish(SYN) Edge finish(114) Cone finish(114) Column finish(114) Foot finish












*Foot:X = Glide


Application Notes





41

X-Base Tables - Standing Height36� and 42� HighOrganic Pentagon Type A and B



30� 36� ILTOPA(S/B/T)X305( )( )( )( )( )( ) $1,048. $1,211. $1,255. $1,437.36� 36� ILTOPA(S/B/T)X365( )( )( )( )( )( ) 1,074. 1,247. 1,302. 1,498.42� 36� ILTOPA(S/B/T)X425( )( )( )( )( )( ) 1,106. 1,289. 1,358. 1,570.



30� 42� ILTOPA(S/B/T)X306( )( )( )( )( )( ) 1,048. 1,211. 1,255. 1,437.36� 42� ILTOPA(S/B/T)X366( )( )( )( )( )( ) 1,074. 1,247. 1,302. 1,498.42� 42� ILTOPA(S/B/T)X426( )( )( )( )( )( ) 1,106. 1,289. 1,358. 1,570.



30� 36� ILTOPB(S/B/T)X305( )( )( )( )( )( )( ) 1,048. 1,211. 1,255. 1,437.36� 36� ILTOPB(S/B/T)X365( )( )( )( )( )( )( ) 1,074. 1,247. 1,302. 1,498.42� 36� ILTOPB(S/B/T)X425( )( )( )( )( )( )( ) 1,106. 1,289. 1,358. 1,570.



30� 42� ILTOPB(S/B/T)X306( )( )( )( )( )( )( ) 1,048. 1,211. 1,255. 1,437.36� 42� ILTOPB(S/B/T)X366( )( )( )( )( )( )( ) 1,074. 1,247. 1,302. 1,498.42� 42� ILTOPB(S/B/T)X426( )( )( )( )( )( )( ) 1,106. 1,289. 1,358. 1,570.


Order Code

Example: ILTOPASX305



AOPB=Organic PentagonType B

S Edge (S/B/T)X Foot30 Width5 36� High, 6=42� HighN Grommet option( ) Grommet finish(114) Worksurface finish(SYN) Edge finish(114) Cone finish(114) Column finish(114) Foot finish












*Foot:X = Glide


Application Notes





42

X-Base Tables - Conference29� High, Horizontal GrainRacetrack, Single-Piece Top


Racetrack29� High

36� 72� 29� ILTRT(S/B/T)X72364H( )( )( )( )( )( )( )( ) $1,738. $1,892. $1,982. $2,202.78� 29� ILTRT(S/B/T)X78364H( )( )( )( )( )( )( )( ) 1,753. 1,912. 2,009. 2,237.84� 29� ILTRT(S/B/T)X84364H( )( )( )( )( )( )( )( ) 1,768. 1,932. 2,035. 2,271.90� 29� ILTRT(S/B/T)X90364H( )( )( )( )( )( )( )( ) 1,783. 1,952. 2,061. 2,304.96� 29� ILTRT(S/B/T)X96364H( )( )( )( )( )( )( )( ) 1,798. 1,972. 2,088. 2,339.108� 29� ILTRT(S/B/T)X108364H( )( )( )( )( )( )( )( ) 1,828. 2,012. 2,141. 2,408.

42� 78� 29� ILTRT(S/B/T)X78424H( )( )( )( )( )( )( )( ) 1,785. 1,955. 2,066. 2,311.84� 29� ILTRT(S/B/T)X84424H( )( )( )( )( )( )( )( ) 1,803. 1,979. 2,097. 2,351.90� 29� ILTRT(S/B/T)X90424H( )( )( )( )( )( )( )( ) 1,820. 2,002. 2,127. 2,390.96� 29� ILTRT(S/B/T)X96424H( )( )( )( )( )( )( )( ) 1,838. 2,025. 2,158. 2,430.108� 29� ILTRT(S/B/T)X108424H( )( )( )( )( )( )( )( ) 1,873. 2,072. 2,220. 2,511.

48� 90� 29� ILTRT(S/B/T)X90484H( )( )( )( )( )( )( )( ) 1,858. 2,052. 2,193. 2,476.96� 29� ILTRT(S/B/T)X96484H( )( )( )( )( )( )( )( ) 1,878. 2,079. 2,229. 2,523.108� 29� ILTRT(S/B/T)X108484H( )( )( )( )( )( )( )( ) 1,918. 2,132. 2,299. 2,614.


Order Code

Example: ILTRTSX72364H


T TableRT RacetrackS Edge (S/B/T)X Foot72 Width36 Depth4 29� HighH Horizontal Grain

DirectionN Grommet option( ) Grommet finish(CC) Grommet location(114) Worksurface finish(SYN) Edge finish(114) Cone finish(114) Column finish(114) Foot finish



N = None (no grommet)D4 = Narrow slot 4�WD8 = Narrow slot 8�WD12 = Narrow slot 12�WD18 = Narrow slot 18�WD24 = Narrow slot 24�WD36 = Narrow slot 36�WS = Power square*Refer to planning guide forgrommet options and locations.

2. Grommet finish:N = Not applicableD4 to D36 = B=Black, W=White(textured)S = 111, 114, 115, 117








Grain Direction:H = HorizontalV = Vertical

*Foot:X = Glide


Application Notes

The following upcharges apply:Beveled Edge (B4 & T4): $500Casters: $30Grommets D4, D8, D12, D18: $80eachGrommets D24, D36: $100 eachPolished finish: $200 (Cone,Column, Foot or all)




43

X-Base Tables - Conference29� High, Vertical GrainRacetrack, Multi-Piece Top


Racetrack29� High

36� 120� 29� ILTRT(S/B/T)X120364V( )( )( )( )( )( )( )( ) $2,796. $3,403. $3,637. $4,166.132� 29� ILTRT(S/B/T)X132364V( )( )( )( )( )( )( )( ) 2,823. 3,430. 3,677. 4,217.144� 29� ILTRT(S/B/T)X144364V( )( )( )( )( )( )( )( ) 2,849. 3,457. 3,716. 4,268.156� 29� ILTRT(S/B/T)X156364V( )( )( )( )( )( )( )( ) 2,875. 3,484. 3,755. 4,319.

42� 120� 29� ILTRT(S/B/T)X120424V( )( )( )( )( )( )( )( ) 2,840. 3,448. 3,703. 4,251.132� 29� ILTRT(S/B/T)X132424V( )( )( )( )( )( )( )( ) 2,871. 3,480. 3,749. 4,311.144� 29� ILTRT(S/B/T)X144424V( )( )( )( )( )( )( )( ) 2,902. 3,511. 3,795. 4,371.156� 29� ILTRT(S/B/T)X156424V( )( )( )( )( )( )( )( ) 2,933. 3,542. 3,841. 4,430.

48� 120� 29� ILTRT(S/B/T)X120484V( )( )( )( )( )( )( )( ) 2,884. 3,493. 3,768. 4,336.132� 29� ILTRT(S/B/T)X132484V( )( )( )( )( )( )( )( ) 2,919. 3,528. 3,821. 4,405.144� 29� ILTRT(S/B/T)X144484V( )( )( )( )( )( )( )( ) 2,955. 3,564. 3,873. 4,472.156� 29� ILTRT(S/B/T)X156484V( )( )( )( )( )( )( )( ) 2,990. 3,600. 3,925. 4,540.


Order Code

Example: ILTRTSX120364V


T TableRT RacetrackS Edge (S/B/T)X Foot120 Width36 Depth4 29� HighV Vertical Grain DirectionN Grommet option( ) Grommet finish(CC) Grommet location(114) Worksurface finish(SYN) Edge finish(114) Cone finish(114) Column finish(114) Foot finish













*Foot:X = Glide


Application Notes





44

X-Base Tables - Conference29� High, Horizontal GrainRacetrack, Multi-Piece Top


Racetrack29� High

36� 120� 29� ILTRT(S/B/T)X120364H( )( )( )( )( )( )( )( ) $2,898. $3,573. $3,833. $4,420.132� 29� ILTRT(S/B/T)X132364H( )( )( )( )( )( )( )( ) 2,928. 3,603. 3,877. 4,478.144� 29� ILTRT(S/B/T)X144364H( )( )( )( )( )( )( )( ) 2,957. 3,633. 3,920. 4,534.156� 29� ILTRT(S/B/T)X156364H( )( )( )( )( )( )( )( ) 2,986. 3,663. 3,964. 4,591.

42� 120� 29� ILTRT(S/B/T)X120424H( )( )( )( )( )( )( )( ) 2,947. 3,623. 3,906. 4,515.132� 29� ILTRT(S/B/T)X132424H( )( )( )( )( )( )( )( ) 2,982. 3,658. 3,957. 4,582.144� 29� ILTRT(S/B/T)X144424H( )( )( )( )( )( )( )( ) 3,016. 3,693. 4,008. 4,648.156� 29� ILTRT(S/B/T)X156424H( )( )( )( )( )( )( )( ) 3,050. 3,727. 4,059. 4,714.

48� 120� 29� ILTRT(S/B/T)X120484H( )( )( )( )( )( )( )( ) 2,996. 3,673. 3,978. 4,609.132� 29� ILTRT(S/B/T)X132484H( )( )( )( )( )( )( )( ) 3,035. 3,712. 1,037. 4,686.144� 29� ILTRT(S/B/T)X144484H( )( )( )( )( )( )( )( ) 3,075. 3,752. 4,095. 4,761.156� 29� ILTRT(S/B/T)X156484H( )( )( )( )( )( )( )( ) 3,114. 3,792. 4,153. 4,836.


Order Code

Example: ILTRTSX120364H


T TableRT RacetrackS Edge (S/B/T)X Foot120 Width36 Depth4 29� HighH Horizontal Grain














*Foot:X = Glide


Application Notes





45

X-Base Tables - Conference29� High, Horizontal GrainRectilinear, Single-Piece Top


Rectilinear29� High

36� 72� 29� ILTRL(S/B/T)X72364H( )( )( )( )( )( )( )( ) $1,738. $1,892. $1,982. $2,202.78� 29� ILTRL(S/B/T)X78364H( )( )( )( )( )( )( )( ) 1,753. 1,912. 2,009. 2,237.84� 29� ILTRL(S/B/T)X84364H( )( )( )( )( )( )( )( ) 1,768. 1,932. 2,035. 2,271.90� 29� ILTRL(S/B/T)X90364H( )( )( )( )( )( )( )( ) 1,783. 1,952. 2,061. 2,304.96� 29� ILTRL(S/B/T)X96364H( )( )( )( )( )( )( )( ) 1,798. 1,972. 2,088. 2,339.108� 29� ILTRL(S/B/T)X108364H( )( )( )( )( )( )( )( ) 1,828. 2,012. 2,141. 2,408.

42� 78� 29� ILTRL(S/B/T)X78424H( )( )( )( )( )( )( )( ) 1,785. 1,955. 2,066. 2,311.84� 29� ILTRL(S/B/T)X84424H( )( )( )( )( )( )( )( ) 1,803. 1,979. 2,097. 2,351.90� 29� ILTRL(S/B/T)X90424H( )( )( )( )( )( )( )( ) 1,820. 2,002. 2,127. 2,390.96� 29� ILTRL(S/B/T)X96424H( )( )( )( )( )( )( )( ) 1,838. 2,025. 2,158. 2,430.108� 29� ILTRL(S/B/T)X108424H( )( )( )( )( )( )( )( ) 1,873. 2,072. 2,220. 2,511.

48� 90� 29� ILTRL(S/B/T)X90484H( )( )( )( )( )( )( )( ) 1,858. 2,052. 2,193. 2,476.96� 29� ILTRL(S/B/T)X96484H( )( )( )( )( )( )( )( ) 1,878. 2,079. 2,229. 2,523.108� 29� ILTRL(S/B/T)X108484H( )( )( )( )( )( )( )( ) 1,918. 2,132. 2,299. 2,614.


Order Code

Example: ILTRLSX72364H


T TableRL RectilinearS Edge (S/B/T)X Foot72 Width36 Depth4 29� HighH Horizontal Grain














*Foot:X = Glide


Application Notes





46

X-Base Tables - Conference29� High, Vertical GrainRectilinear, Multi-Piece Top



36� 120� 29� ILTRL(S/B/T)X120364V( )( )( )( )( )( )( )( ) $2,467. $3,108. $3,339. $3,779.132� 29� ILTRL(S/B/T)X132364V( )( )( )( )( )( )( )( ) 2,494. 3,136. 3,380. 3,831.144� 29� ILTRL(S/B/T)X144364V( )( )( )( )( )( )( )( ) 2,520. 3,164. 3,419. 3,883.156� 29� ILTRL(S/B/T)X156364V( )( )( )( )( )( )( )( ) 2,546. 3,192. 3,459. 3,934.

42� 120� 29� ILTRL(S/B/T)X120424V( )( )( )( )( )( )( )( ) 2,511. 3,155. 3,406. 3,865.132� 29� ILTRL(S/B/T)X132424V( )( )( )( )( )( )( )( ) 2,542. 3,187. 3,453. 3,926.144� 29� ILTRL(S/B/T)X144424V( )( )( )( )( )( )( )( ) 2,573. 3,219. 3,499. 3,986.156� 29� ILTRL(S/B/T)X156424V( )( )( )( )( )( )( )( ) 2,604. 3,251. 3,545. 4,047.

48� 120� 29� ILTRL(S/B/T)X120484V( )( )( )( )( )( )( )( ) 2,555. 3,201. 3,473. 3,952.132� 29� ILTRL(S/B/T)X132484V( )( )( )( )( )( )( )( ) 2,591. 3,238. 3,526. 4,021.144� 29� ILTRL(S/B/T)X144484V( )( )( )( )( )( )( )( ) 2,626. 3,275. 3,579. 4,090.156� 29� ILTRL(S/B/T)X156484V( )( )( )( )( )( )( )( ) 2,661. 3,311. 3,632. 4,159.


Order Code

Example: ILTRLSX120364V


T TableRL RectilinearS Edge (S/B/T)X Foot120 Width36 Depth4 29� HighV Vertical Grain DirectionN Grommet option( ) Grommet finish(CC) Grommet location(114) Worksurface finish(SYN) Edge finish(114) Cone finish(114) Column finish(114) Foot finish













*Foot:X = Glide


Application Notes





47

X-Base Tables - Conference29� High, Horizontal GrainRectilinear, Multi-Piece Top



36� 120� 29� ILTRL(S/B/T)X120364H( )( )( )( )( )( )( )( ) $2,533. $3,245. $3,502. $3,990.132� 29� ILTRL(S/B/T)X132364H( )( )( )( )( )( )( )( ) 2,563. 3,276. 3,547. 4,049.144� 29� ILTRL(S/B/T)X144364H( )( )( )( )( )( )( )( ) 2,592. 3,307. 3,591. 4,106.156� 29� ILTRL(S/B/T)X156364H( )( )( )( )( )( )( )( ) 2,621. 3,338. 3,635. 4,163.

42� 120� 29� ILTRL(S/B/T)X120424H( )( )( )( )( )( )( )( ) 2,582. 3,297. 3,576. 4,086.132� 29� ILTRL(S/B/T)X132424H( )( )( )( )( )( )( )( ) 2,616. 3,333. 3,628. 4,154.144� 29� ILTRL(S/B/T)X144424H( )( )( )( )( )( )( )( ) 2,651. 3,368. 3,679. 4,220.156� 29� ILTRL(S/B/T)X156424H( )( )( )( )( )( )( )( ) 2,685. 3,404. 3,731. 4,288.

48� 120� 29� ILTRL(S/B/T)X120484H( )( )( )( )( )( )( )( ) 2,631. 3,348. 3,650. 4,183.132� 29� ILTRL(S/B/T)X132484H( )( )( )( )( )( )( )( ) 2,670. 3,389. 3,709. 4,259.144� 29� ILTRL(S/B/T)X144484H( )( )( )( )( )( )( )( ) 2,709. 3,430. 3,768. 4,336.156� 29� ILTRL(S/B/T)X156484H( )( )( )( )( )( )( )( ) 2,748. 3,471. 3,827. 4,413.


Order Code

Example: ILTRLSX120364H


T TableRL RectilinearS Edge (S/B/T)X Foot120 Width36 Depth4 29� HighH Horizontal Grain














*Foot:X = Glide


Application Notes





48

X-Base Tables - Conference29� High, Horizontal GrainRectilinear with Curved Corners, Single-Piece Top


Rectilinear with Curved Corners29� High

36� 72� 29� ILTRC(S/B/T)X72364H( )( )( )( )( )( )( )( ) $1,738. $1,892. $1,982. $2,202.78� 29� ILTRC(S/B/T)X78364H( )( )( )( )( )( )( )( ) 1,753. 1,912. 2,009. 2,237.84� 29� ILTRC(S/B/T)X84364H( )( )( )( )( )( )( )( ) 1,768. 1,932. 2,035. 2,271.90� 29� ILTRC(S/B/T)X90364H( )( )( )( )( )( )( )( ) 1,783. 1,952. 2,061. 2,304.96� 29� ILTRC(S/B/T)X96364H( )( )( )( )( )( )( )( ) 1,798. 1,972. 2,088. 2,339.108� 29� ILTRC(S/B/T)X108364H( )( )( )( )( )( )( )( ) 1,828. 2,012. 2,141. 2,408.

42� 78� 29� ILTRC(S/B/T)X78424H( )( )( )( )( )( )( )( ) 1,785. 1,955. 2,066. 2,311.84� 29� ILTRC(S/B/T)X84424H( )( )( )( )( )( )( )( ) 1,803. 1,979. 2,097. 2,351.90� 29� ILTRC(S/B/T)X90424H( )( )( )( )( )( )( )( ) 1,820. 2,002. 2,127. 2,390.96� 29� ILTRC(S/B/T)X96424H( )( )( )( )( )( )( )( ) 1,838. 2,025. 2,158. 2,430.108� 29� ILTRC(S/B/T)X108424H( )( )( )( )( )( )( )( ) 1,873. 2,072. 2,220. 2,511.

48� 90� 29� ILTRC(S/B/T)X90484H( )( )( )( )( )( )( )( ) 1,858. 2,052. 2,193. 2,476.96� 29� ILTRC(S/B/T)X96484H( )( )( )( )( )( )( )( ) 1,878. 2,079. 2,229. 2,523.108� 29� ILTRC(S/B/T)X108484H( )( )( )( )( )( )( )( ) 1,918. 2,132. 2,299. 2,614.


Order Code

Example: ILTRCSX72364H


T TableRC Rectilinear with Curved

CornersS Edge (S/B/T)X Foot72 Width36 Depth4 29� HighH Horizontal Grain














*Foot:X = Glide


Application Notes





49

X-Base Tables - Conference29� High, Vertical GrainRectilinear with Curved Corners, Multi-Piece Top



36� 120� 29� ILTRC(S/B/T)X120364V( )( )( )( )( )( )( )( ) $2,467. $3,108. $3,339. $3,779.132� 29� ILTRC(S/B/T)X132364V( )( )( )( )( )( )( )( ) 2,494. 3,136. 3,380. 3,831.144� 29� ILTRC(S/B/T)X144364V( )( )( )( )( )( )( )( ) 2,520. 3,164. 3,419. 3,883.156� 29� ILTRC(S/B/T)X156364V( )( )( )( )( )( )( )( ) 2,546. 3,192. 3,459. 3,934.

42� 120� 29� ILTRC(S/B/T)X120424V( )( )( )( )( )( )( )( ) 2,511. 3,155. 3,406. 3,865.132� 29� ILTRC(S/B/T)X132424V( )( )( )( )( )( )( )( ) 2,542. 3,187. 3,453. 3,926.144� 29� ILTRC(S/B/T)X144424V( )( )( )( )( )( )( )( ) 2,573. 3,219. 3,499. 3,986.156� 29� ILTRC(S/B/T)X156424V( )( )( )( )( )( )( )( ) 2,604. 3,251. 3,545. 4,047.

48� 120� 29� ILTRC(S/B/T)X120484V( )( )( )( )( )( )( )( ) 2,555. 3,201. 3,473.3132� 29� ILTRC(S/B/T)X132484V( )( )( )( )( )( )( )( ) 2,591. 3,238. 3,526. 4,021.144� 29� ILTRC(S/B/T)X144484V( )( )( )( )( )( )( )( ) 2,626. 3,275. 3,579. 4,090.156� 29� ILTRC(S/B/T)X156484V( )( )( )( )( )( )( )( ) 2,661. 3,311. 3,632. 4,159.


Order Code

Example: ILTRCSX120364V



CornersS Edge (S/B/T)X Foot120 Width36 Depth4 29� HighV Vertical Grain DirectionN Grommet option( ) Grommet finish(CC) Grommet location(114) Worksurface finish(SYN) Edge finish(114) Cone finish(114) Column finish(114) Foot finish













*Foot:X = Glide


Application Notes





50

X-Base Tables - Conference29� High, Horizontal GrainRectilinear with Curved Corners, Multi-Piece Top



36� 120� 29� ILTRC(S/B/T)X120364H( )( )( )( )( )( )( )( ) $2,898. $3,573. $3,833. $4,420.132� 29� ILTRC(S/B/T)X132364H( )( )( )( )( )( )( )( ) 2,928. 3,603. 3,877. 4,478.144� 29� ILTRC(S/B/T)X144364H( )( )( )( )( )( )( )( ) 2,957. 3,633. 3,920. 4,534.156� 29� ILTRC(S/B/T)X156364H( )( )( )( )( )( )( )( ) 2,986. 3,663. 3,964. 4,591.

42� 120� 29� ILTRC(S/B/T)X120424H( )( )( )( )( )( )( )( ) 2,947. 3,623. 3,906. 4,515.132� 29� ILTRC(S/B/T)X132424H( )( )( )( )( )( )( )( ) 2,982. 3,658. 3,957. 4,582.144� 29� ILTRC(S/B/T)X144424H( )( )( )( )( )( )( )( ) 3,016. 3,693. 4,008. 4,648.156� 29� ILTRC(S/B/T)X156424H( )( )( )( )( )( )( )( ) 3,050. 3,727. 4,059. 4,714.

48� 120� 29� ILTRC(S/B/T)X120484H( )( )( )( )( )( )( )( ) 2,996. 3,673. 3,978. 4,609.132� 29� ILTRC(S/B/T)X132484H( )( )( )( )( )( )( )( ) 3,035. 3,712. 4,037. 4,686.144� 29� ILTRC(S/B/T)X144484H( )( )( )( )( )( )( )( ) 3,075. 3,752. 4,095. 4,761.156� 29� ILTRC(S/B/T)X156484H( )( )( )( )( )( )( )( ) 3,114. 3,792. 4,153. 4,836.


Order Code

Example: ILTRCSX120364H



CornersS Edge (S/B/T)X Foot120 Width36 Depth4 29� HighH Horizontal Grain














*Foot:X = Glide


Application Notes





51

X-Base Tables - Conference29� High, Horizontal GrainRound Rectilinear, Single-Piece Top


Round Rectilinear29� High

36� 72� 29� ILTRR(S/B/T)X72364H( )( )( )( )( )( )( )( ) $1,738. $1,892. $1,982. $2,202.78� 29� ILTRR(S/B/T)X78364H( )( )( )( )( )( )( )( ) 1,753. 1,912. 2,009. 2,237.84� 29� ILTRR(S/B/T)X84364H( )( )( )( )( )( )( )( ) 1,768. 1,932. 2,035. 2,271.90� 29� ILTRR(S/B/T)X90364H( )( )( )( )( )( )( )( ) 1,783. 1,952. 2,061. 2,304.96� 29� ILTRR(S/B/T)X96364H( )( )( )( )( )( )( )( ) 1,798. 1,972. 2,088. 2,339.108� 29� ILTRR(S/B/T)X108364H( )( )( )( )( )( )( )( ) 1,828. 2,012. 2,141. 2,408.

42� 78� 29� ILTRR(S/B/T)X78424H( )( )( )( )( )( )( )( ) 1,785. 1,955. 2,066. 2,311.84� 29� ILTRR(S/B/T)X84424H( )( )( )( )( )( )( )( ) 1,803. 1,979. 2,097. 2,351.90� 29� ILTRR(S/B/T)X90424H( )( )( )( )( )( )( )( ) 1,820. 2,002. 2,127. 2,390.96� 29� ILTRR(S/B/T)X96424H( )( )( )( )( )( )( )( ) 1,838. 2,025. 2,158. 2,430.108� 29� ILTRR(S/B/T)X108424H( )( )( )( )( )( )( )( ) 1,873. 2,072. 2,220. 2,511.

48� 90� 29� ILTRR(S/B/T)X90484H( )( )( )( )( )( )( )( ) 1,858. 2,052. 2,193. 2,476.96� 29� ILTRR(S/B/T)X96484H( )( )( )( )( )( )( )( ) 1,878. 2,079. 2,229. 2,523.108� 29� ILTRR(S/B/T)X108484H( )( )( )( )( )( )( )( ) 1,918. 2,132. 2,299. 2,614.


Order Code

Example: ILTRRSX72364H


T TableRR Round RectilinearS Edge (S/B/T)X Foot72 Width36 Depth4 29� HighH Horizontal Grain














*Foot:X = Glide


Application Notes





52

X-Base Tables - Conference29� High, Vertical GrainRound Rectilinear, Multi-Piece Top


Round Rectilinear Table29� High

36� 120� 29� ILTRR(S/B/T)X120364V( )( )( )( )( )( )( )( ) $2,796. $3,403. $3,637. $4,166.132� 29� ILTRR(S/B/T)X132364V( )( )( )( )( )( )( )( ) 2,823. 3,430. 3,677. 4,217.144� 29� ILTRR(S/B/T)X144364V( )( )( )( )( )( )( )( ) 2,849. 3,457. 3,716. 4,268.156� 29� ILTRR(S/B/T)X156364V( )( )( )( )( )( )( )( ) 2,875. 3,484. 3,755. 4,319.

42� 120� 29� ILTRR(S/B/T)X120424V( )( )( )( )( )( )( )( ) 2,840. 3,448. 3,703. 4,251.132� 29� ILTRR(S/B/T)X132424V( )( )( )( )( )( )( )( ) 2,871. 3,480. 3,749. 4,311.144� 29� ILTRR(S/B/T)X144424V( )( )( )( )( )( )( )( ) 2,902. 3,511. 3,795. 4,371.156� 29� ILTRR(S/B/T)X156424V( )( )( )( )( )( )( )( ) 2,933. 3,542. 3,841. 4,430.

48� 120� 29� ILTRR(S/B/T)X120484V( )( )( )( )( )( )( )( ) 2,884. 3,493. 3,768. 4,336.132� 29� ILTRR(S/B/T)X132484V( )( )( )( )( )( )( )( ) 2,919. 3,528. 3,821. 4,405.144� 29� ILTRR(S/B/T)X144484V( )( )( )( )( )( )( )( ) 2,955. 3,564. 3,873. 4,472.156� 29� ILTRR(S/B/T)X156484V( )( )( )( )( )( )( )( ) 2,990. 3,600. 3,925. 4,540.


Order Code



T TableRR Round RectilinearS Edge (S/B/T)X Foot120 Width36 Depth4 29� HighN Grommet option( ) Grommet finish(CC) Grommet location(114) Worksurface finish(SYN) Edge finish(114) Cone finish(114) Column finish(114) Foot finish













*Foot:X = Glide


Application Notes





53

X-Base Tables - Conference29� High, Horizontal GrainRound Rectilinear, Multi-Piece Top


Round Rectilinear Table29� High

36� 120� 29� ILTRR(S/B/T)X120364H( )( )( )( )( )( )( )( ) $2,898. $3,573. $3,833. $4,420.132� 29� ILTRR(S/B/T)X132364H( )( )( )( )( )( )( )( ) 2,928. 3,603. 3,877. 4,478.144� 29� ILTRR(S/B/T)X144364H( )( )( )( )( )( )( )( ) 2,957. 3,633. 3,920. 4,534.156� 29� ILTRR(S/B/T)X156364H( )( )( )( )( )( )( )( ) 2,986. 3,663. 3,964. 4,591.

42� 120� 29� ILTRR(S/B/T)X120424H( )( )( )( )( )( )( )( ) 2,947. 3,623. 3,906. 4,515.132� 29� ILTRR(S/B/T)X132424H( )( )( )( )( )( )( )( ) 2,982. 3,658. 3,957. 4,582.144� 29� ILTRR(S/B/T)X144424H( )( )( )( )( )( )( )( ) 3,016. 3,693. 4,008. 4,648.156� 29� ILTRR(S/B/T)X156424H( )( )( )( )( )( )( )( ) 3,050. 3,727. 4,059. 4,714.

48� 120� 29� ILTRR(S/B/T)X120484H( )( )( )( )( )( )( )( ) 2,996. 3,673. 3,978. 4,609.132� 29� ILTRR(S/B/T)X132484H( )( )( )( )( )( )( )( ) 3,035. 3,712. 4,037. 4,686.144� 29� ILTRR(S/B/T)X144484H( )( )( )( )( )( )( )( ) 3,075. 3,752. 4,095. 4,761.156� 29� ILTRR(S/B/T)X156484H( )( )( )( )( )( )( )( ) 3,114. 3,792. 4,153. 4,836.


Order Code



T TableRR Round RectilinearS Edge (S/B/T)X Foot120 Width36 Depth4 29� HighN Grommet option( ) Grommet finish(CC) Grommet location(114) Worksurface finish(SYN) Edge finish(114) Cone finish(114) Column finish(114) Foot finish













*Foot:X = Glide


Application Notes





54

X-Base Tables - Conference29� High, Horizontal GrainSoft Rectilinear, Single-Piece Top


Soft Rectilinear29� High

36� 108� 29� ILTSR(S/B/T)X108364H( )( )( )( )( )( )( )( ) $1,828. $2,012. $2,141. $2,408.72� 29� ILTSR(S/B/T)X72364H( )( )( )( )( )( )( )( ) 1,738. 1,892. 1,982. 2,202.78� 29� ILTSR(S/B/T)X78364H( )( )( )( )( )( )( )( ) 1,753. 1,912. 2,009. 2,237.84� 29� ILTSR(S/B/T)X84364H( )( )( )( )( )( )( )( ) 1,768. 1,932. 2,035. 2,271.90� 29� ILTSR(S/B/T)X90364H( )( )( )( )( )( )( )( ) 1,783. 1,952. 2,061. 2,304.96� 29� ILTSR(S/B/T)X96364H( )( )( )( )( )( )( )( ) 1,798. 1,972. 2,088. 2,339.

42� 108� 29� ILTSR(S/B/T)X108424H( )( )( )( )( )( )( )( ) 1,873. 2,072. 2,220. 2,511.78� 29� ILTSR(S/B/T)X78424H( )( )( )( )( )( )( )( ) 1,785. 1,955. 2,066. 2,311.84� 29� ILTSR(S/B/T)X84424H( )( )( )( )( )( )( )( ) 1,803. 1,979. 2,097. 2,351.90� 29� ILTSR(S/B/T)X90424H( )( )( )( )( )( )( )( ) 1,820. 2,002. 2,127. 2,390.96� 29� ILTSR(S/B/T)X96424H( )( )( )( )( )( )( )( ) 1,838. 2,025. 2,158. 2,430.

48� 108� 29� ILTSR(S/B/T)X108484H( )( )( )( )( )( )( )( ) 1,918. 2,132. 2,299. 2,614.90� 29� ILTSR(S/B/T)X90484H( )( )( )( )( )( )( )( ) 1,858. 2,052. 2,193. 2,476.96� 29� ILTSR(S/B/T)X96484H( )( )( )( )( )( )( )( ) 1,878. 2,079. 2,229. 2,523.


Order Code

Example: ILTSRSX72364H


T TableSR Soft RectilinearS Edge (S/B/T)X Foot72 Width36 Depth4 29� HighH Horizontal Grain














*Foot:X = Glide


Application Notes





55

X-Base Tables - Conference29� High, Vertical GrainSoft Rectilinear, Multi-Piece Top



36� 120� 29� ILTSR(S/B/T)X120364V( )( )( )( )( )( )( )( ) $2,796. $3,403. $3,637. $4,166.132� 29� ILTSR(S/B/T)X132364V( )( )( )( )( )( )( )( ) 2,823. 3,430. 3,677. 4,217.144� 29� ILTSR(S/B/T)X144364V( )( )( )( )( )( )( )( ) 2,849. 3,457. 3,716. 4,268.156� 29� ILTSR(S/B/T)X156364V( )( )( )( )( )( )( )( ) 2,875. 3,484. 3,755. 4,319.

42� 120� 29� ILTSR(S/B/T)X120424V( )( )( )( )( )( )( )( ) 2,840. 3,448. 3,703. 4,251.132� 29� ILTSR(S/B/T)X132424V( )( )( )( )( )( )( )( ) 2,871. 3,480. 3,749. 4,311.144� 29� ILTSR(S/B/T)X144424V( )( )( )( )( )( )( )( ) 2,902. 3,511. 3,795. 4,371.156� 29� ILTSR(S/B/T)X156424V( )( )( )( )( )( )( )( ) 2,933. 3,542. 3,841. 4,430.

48� 120� 29� ILTSR(S/B/T)X120484V( )( )( )( )( )( )( )( ) 2,884. 3,493. 3,768. 4,336.132� 29� ILTSR(S/B/T)X132484V( )( )( )( )( )( )( )( ) 2,919. 3,528. 3,821. 4,405.144� 29� ILTSR(S/B/T)X144484V( )( )( )( )( )( )( )( ) 2,955. 3,564. 3,873. 4,472.156� 29� ILTSR(S/B/T)X156484V( )( )( )( )( )( )( )( ) 2,990. 3,600. 3,925. 4,540.


Order Code

















*Foot:X = Glide


Application Notes





56

X-Base Tables - Conference29� High, Horizontal GrainSoft Rectilinear, Multi-Piece Top



36� 120� 29� ILTSR(S/B/T)X120364H( )( )( )( )( )( )( )( ) $2,898. $3,573. $3,833. $4,420.132� 29� ILTSR(S/B/T)X132364H( )( )( )( )( )( )( )( ) 2,928. 3,603. 3,877. 4,478.144� 29� ILTSR(S/B/T)X144364H( )( )( )( )( )( )( )( ) 2,957. 3,633. 3,920. 4,534.156� 29� ILTSR(S/B/T)X156364H( )( )( )( )( )( )( )( ) 2,986. 3,663. 3,964. 4,591.

42� 120� 29� ILTSR(S/B/T)X120424H( )( )( )( )( )( )( )( ) 2,947. 3,623. 3,906. 4,515.132� 29� ILTSR(S/B/T)X132424H( )( )( )( )( )( )( )( ) 2,982. 3,658. 3,957. 4,582.144� 29� ILTSR(S/B/T)X144424H( )( )( )( )( )( )( )( ) 3,016. 3,693. 4,008. 4,648.156� 29� ILTSR(S/B/T)X156424H( )( )( )( )( )( )( )( ) 3,050. 3,727. 4,059. 4,714.

48� 120� 29� ILTSR(S/B/T)X120484H( )( )( )( )( )( )( )( ) 2,996. 3,673. 3,978. 4,609.132� 29� ILTSR(S/B/T)X132484H( )( )( )( )( )( )( )( ) 3,035. 3,712. 4,037. 4,686.144� 29� ILTSR(S/B/T)X144484H( )( )( )( )( )( )( )( ) 3,075. 3,752. 4,095. 4,761.156� 29� ILTSR(S/B/T)X156484H( )( )( )( )( )( )( )( ) 3,114. 3,792. 4,153. 4,836.


Order Code

















*Foot:X = Glide


Application Notes





57

MX Base Tables - Occasional Heights12�, 15� and 18� HighRound Tables



45� dia. Table shown

45� 12� ILTRD(S/B/T)MG451( )( )( )( )( )( ) $1,000. $1,250. $1,350. $1,550.48� 12� ILTRD(S/B/T)MG481( )( )( )( )( )( ) 1,030. 1,288. 1,391. 1,597.54� 12� ILTRD(S/B/T)MG541( )( )( )( )( )( ) 1,061. 1,326. 1,432. 1,660.60� 12� ILTRD(S/B/T)MG601( )( )( )( )( )( ) 1,093. 1,366. 1,475. 1,710.




45� 15� ILTRD(S/B/T)MG452( )( )( )( )( )( ) 1,350. 1,550. 1,650. 1,850.48� 15� ILTRD(S/B/T)MG482( )( )( )( )( )( ) 1,391. 1,597. 1,700. 1,906.54� 15� ILTRD(S/B/T)MG542( )( )( )( )( )( ) 1,432. 1,644. 1,750. 1,982.60� 15� ILTRD(S/B/T)MG602( )( )( )( )( )( ) 1,475. 1,694. 1,803. 2,041.




45� 18� ILTRD(S/B/T)(MG/MC)453( )( )( )( )( )( ) 1,350. 1,550. 1,650. 1,850.48� 18� ILTRD(S/B/T)(MG/MC)483( )( )( )( )( )( ) 1,391. 1,597. 1,700. 1,906.54� 18� ILTRD(S/B/T)(MG/MC)543( )( )( )( )( )( ) 1,432. 1,644. 1,750. 1,982.60� 18� ILTRD(S/B/T)(MG/MC)603( )( )( )( )( )( ) 1,475. 1,694. 1,803. 2,041.


45� diameter tables feature 3 legs48�, 54�, 60� diameter tables feature 4 legs

Order Code

Example: ILTRDSMG451


T TableRD RoundS Edge (S/B/T)MG Foot (MG/MC)45 Size1 Height (1/2/3)N Grommet option( ) Grommet finish(114) Worksurface finish(SYN) Edge finish(114) Mount finish(114) Column finish(114) Foot finish



N = None (no grommet)D8 = Narrow slot 8�W (45�, 48�& 54�)D12 = Wide Slide 12�W (60�)S = Power square

2. Grommet finish:N = Not applicableD8 / D12 = B=Black, W=White(textured)S = 111, 114, 115, 117



5. Mount finish:Painted/texturedPolished aluminum





*Foot:MG = GlideMC = Caster


Application Notes

The following upcharges apply:Beveled Edge (B & T): $500Casters: $30Grommets D4: $80Polished finish: $100 (Mount,Column, Foot or all)




58

MX Base Tables - Occasional Heights12�, 15� and 18� HighSquare Tables



48� 12� ILTSQ(S/B/T)MG481( )( )( )( )( )( ) $1,030. $1,288. $1,391. $1,597.54� 12� ILTSQ(S/B/T)MG541( )( )( )( )( )( ) 1,061. 1,326. 1,432. 1,660.60� 12� ILTSQ(S/B/T)MG601( )( )( )( )( )( ) 1,093. 1,366. 1,475. 1,710.



48� 15� ILTSQ(S/B/T)MG482( )( )( )( )( )( ) 1,391. 1,597. 1,700. 1,906.54� 15� ILTSQ(S/B/T)MG542( )( )( )( )( )( ) 1,432. 1,644. 1,750. 1,982.60� 15� ILTSQ(S/B/T)MG602( )( )( )( )( )( ) 1,475. 1,694. 1,803. 2,041.



48� 18� ILTSQ(S/B/T)(MG/MC)483( )( )( )( )( )( ) 1,391. 1,597. 1,700. 1,906.54� 18� ILTSQ(S/B/T)(MG/MC)543( )( )( )( )( )( ) 1,432. 1,644. 1,750. 1,982.60� 18� ILTSQ(S/B/T)(MG/MC)603( )( )( )( )( )( ) 1,475. 1,694. 1,803. 2,041.


Order Code

Example: ILTSQSMG481


T TableSQ SquareS Edge (S/B/T)MG Foot (MG/MC)48 Width1 Height (1/2/3)N Grommet option( ) Grommet finish(114) Worksurface finish(SYN) Edge finish(114) Mount finish(114) Column finish(114) Foot finish



N = None (no grommet)D8 = Narrow slot 8�W (48� &54�)D12 = Narrow Slot 12�W (60�)S = Power square




5. Mount finish:Painted/texturedPolished aluminum12�H = NA-top plate is black







Application Notes

The following upcharges apply:Beveled Edge (B & T): $500Casters: $30Grommets D8/12: $120Polished finish: $100 (Column,Foot or all)




59

MX Base Tables - Occasional Heights12�, 15� and 18� HighSquare Table with Curved Corners


Square Table, Curved corners12� High

48� 48� 12� ILTSC(S/B/T)MG481( )( )( )( )( )( ) $1,300. $1,288. $1,391. $1,597.54� 54� 12� ILTSC(S/B/T)MG541( )( )( )( )( )( ) 1,339. 1,326. 1,432. 1,660.60� 60� 12� ILTSC(S/B/T)MG601( )( )( )( )( )( ) 1,379. 1,366. 1,475. 1,710.



48� 48� 15� ILTSC(S/B/T)MG482( )( )( )( )( )( ) 1,391. 1,597. 1,700. 1,906.54� 54� 15� ILTSC(S/B/T)MG542( )( )( )( )( )( ) 1,432. 1,644. 1,750. 1,982.60� 60� 15� ILTSC(S/B/T)MG602( )( )( )( )( )( ) 1,475. 1,694. 1,803. 2,041.



48� 48� 18� ILTSC(S/B/T)(MG/MC)483( )( )( )( )( )( ) 1,391. 1,597. 1,700. 1,906.54� 54� 18� ILTSC(S/B/T)(MG/MC)543( )( )( )( )( )( ) 1,432. 1,644. 1,750. 1,982.60� 60� 18� ILTSC(S/B/T)(MG/MC)603( )( )( )( )( )( ) 1,475. 1,694. 1,803. 2,041.


Order Code

Example: ILTSCSMG481


T TableSC Square with Curved

CornersS Edge (S/B/T)MG Foot (MG/MC)48 Size1 Height (1/2/3)N Grommet option( ) Grommet finish(114) Worksurface finish(SYN) Edge finish(114) Mount finish(114) Column finish(114) Leg finish







5. Mount finish:Painted/texturedPolished aluminum, 12�H NA -top plate is black


7. Foot finish:Painted /textured polishedaluminum





Application Notes

�

The following upcharges apply:Beveled Edge (B & T): $650Casters: $30Grommets D8 & D12: $120Polished finish: $100 (Mount,Column, Foot or all)



60

MX Base Tables - Occasional Heights12�, 15� and 18� HighSoft Square Tables



48� 12� ILTSS(S/B/T)MG481( )( )( )( )( )( ) $1,300. $1,288. $1,391. $1,597.54� 12� ILTSS(S/B/T)MG541( )( )( )( )( )( ) 1,339. 1,326. 1,432. 1,660.60� 12� ILTSS(S/B/T)MG601( )( )( )( )( )( ) 1,379. 1,366. 1,475. 1,710.



48� 15� ILTSS(S/B/T)MG482( )( )( )( )( )( ) 1,391. 1,597. 1,700. 1,906.54� 15� ILTSS(S/B/T)MG542( )( )( )( )( )( ) 1,432. 1,644. 1,750. 1,982.60� 15� ILTSS(S/B/T)MG602( )( )( )( )( )( ) 1,475. 1,694. 1,803. 2,041.



48� 18� ILTSS(S/B/T)(MG/MC)483( )( )( )( )( )( ) 1,391. 1,597. 1,700. 1,906.54� 18� ILTSS(S/B/T)(MG/MC)543( )( )( )( )( )( ) 1,432. 1,644. 1,750. 1,982.60� 18� ILTSS(S/B/T)(MG/MC)603( )( )( )( )( )( ) 1,475. 1,694. 1,803. 2,041.


Order Code

Example: ILTSSSMG481


T TableSS Soft SquareS Edge (S/B/T)MG Foot (MG/MC)48 Size1 Height (1/2/3)N Grommet option( ) Grommet finish(114) Worksurface finish(SYN) Edge finish(114) Cone finish(114) Foot finish




2. Grommet finish:N = Not applicableD8 / D12 = B=Black, W=White(textured)



5. Mount finish:Painted/texturedPolished aluminum,12�H NA - top plate is black







Application Notes

The following upcharges apply:Beveled Edge (B & T): $500Casters: $30Grommets D8 /D12: $120Polished finish: $100 (Mount,Column, Foot or all)




61

MX Base Tables - Occasional Heights12�, 15� and 18� HighSoft Pentagon



45�d Table shown

45� 12� ILTSP(S/B/T)MG451( )( )( )( )( )( ) $1,185. $1,481. $1,599. $1,836.48� 12� ILTSP(S/B/T)MG481( )( )( )( )( )( ) 1,220. 1,525. 1,647. 1,891.54� 12� ILTSP(S/B/T)MG541( )( )( )( )( )( ) 1,257. 1,571. 1,696. 1,967.60� 12� ILTSP(S/B/T)MG601( )( )( )( )( )( ) 1,294. 1,618. 1,747. 2,026.



54�d Table shown

45� 15� ILTSP(S/B/T)MG452( )( )( )( )( )( ) 1,660. 1,939. 2,064. 2,292.48� 15� ILTSP(S/B/T)MG482( )( )( )( )( )( ) 1,710. 1,997. 2,126. 2,361.54� 15� ILTSP(S/B/T)MG542( )( )( )( )( )( ) 1,761. 2,057. 2,190. 2,455.60� 15� ILTSP(S/B/T)MG602( )( )( )( )( )( ) 1,814. 2,119. 2,255. 2,529.



45�d Table shown

45� 18� ILTPT(S/B/T)(MG/MC)453( )( )( )( )( )( ) 1,660. 1,939. 2,064. 2,292.48� 18� ILTPT(S/B/T)(MG/MC)483( )( )( )( )( )( ) 1,710. 1,997. 2,126. 2,361.54� 18� ILTPT(S/B/T)(MG/MC)543( )( )( )( )( )( ) 1,761. 2,057. 2,190. 2,455.60� 18� ILTPT(S/B/T)(MG/MC)603( )( )( )( )( )( ) 1,814. 2,119. 2,255. 2,529.


45� diameter tables feature 3 legs48�, 54� & 60� diameter tables feature 5 legs

Order Code

Example: ILTSPSMG451


T TableSP Soft PentagonS Edge (S/B/T)MG Foot (MG/MC)45 Size1 Height (1/2/3)N Grommet option( ) Grommet finish(114) Worksurface finish(SYN) Edge finish(114) Mount finish(114) Column finish(114) Foot finish



N = None (no grommet)D8 = Narrow slot 8�W (45�, 48�& 54�)D12 = Narrow Slot 12�W (60�)S = Power square




5. Mount finish:Painted/texturedPolished aluminum12�H NA - Top plate is black







Application Notes

The following upcharges apply:Beveled Edge (B & T): $500Casters: $30Grommets D8 / D12: $120Polished finish: $100 (Mount,Column, Foot or all)




62

MX Base Tables - Occasional Heights12�, 15� and 18� HighOrganic Pentagon Type A


Soft Pentagon TableType A, 12� High

48� 30� 12� ILTOPA(S/B/T)MG481( )( )( )( )( )( )( ) $1,071. $1,339. $1,446. $1,660.56� 36� 12� ILTOPA(S/B/T)MG541( )( )( )( )( )( )( ) 1,103. 1,379. 1,490. 1,727.60� 42� 12� ILTOPA(S/B/T)MG601( )( )( )( )( )( )( ) 1,136. 1,421. 1,534. 1,779.



48� 30� 15� ILTOPA(S/B/T)MG482( )( )( )( )( )( )( ) 1,446. 1,660. 1,767. 1,982.54� 36� 15� ILTOPA(S/B/T)MG542( )( )( )( )( )( )( ) 1,490. 1,710. 1,821. 2,061.60� 42� 15� ILTOPA(S/B/T)MG602( )( )( )( )( )( )( ) 1,534. 1,761. 1,875. 2,123.



48� 30� 18� ILTOPA(S/B/T)(MG/MC)483( )( )( )( )( )( )( ) 1,446. 1,660. 1,767. 1,982.54� 36� 18� ILTOPA(S/B/T)(MG/MC)543( )( )( )( )( )( )( ) 1,490. 1,710. 1,821. 2,061.60� 42� 18� ILTOPA(S/B/T)(MG/MC)603( )( )( )( )( )( )( ) 1,534. 1,761. 1,875. 2,123.


Order Code

Example: ILTOPASMG481



AS Edge (S/B/T)MG Foot (MG/MC)48 Size1 Height (1/2/3)N Grommet option( ) Grommet finish(114) Worksurface finish(SYN) Edge finish(114) Mount finish(114) Column finish(114) Foot finish




2. Grommet finish:N = Not applicableD8 /D12 = B=Black, W=White(textured)S = 111, 114, 115, 117



5. Mount finish;:Painted/texturedPolished aluminum12�H NA - Top plate is black







Application Notes





63

MX Base Tables - Occasional Heights12�, 15� and 18� HighOrganic Pentagon Type B



48� 48� 12� ILTOPB(S/B/T)MG481( )( )( )( )( )( )( ) $1,071. $1,339. $1,446. $1,660.54� 54� 12� ILTOPB(S/B/T)MG541( )( )( )( )( )( )( ) 1,103. 1,379. 1,490. 1,727.60� 60� 12� ILTOPB(S/B/T)MG601( )( )( )( )( )( )( ) 1,136. 1,421. 1,534. 1,779.



48� 48� 15� ILTOPB(S/B/T)MG482( )( )( )( )( )( )( ) 1,446. 1,660. 767. 1,982.54� 54� 15� ILTOPB(S/B/T)MG542( )( )( )( )( )( )( ) 1,490. 1,710. 1,821. 2,061.60� 60� 15� ILTOPB(S/B/T)MG602( )( )( )( )( )( )( ) 1,534. 1,761. 1,875. 2,123.



48� 48� 18� ILTOPB(S/B/T)(MG/MC)483( )( )( )( )( )( )( ) 1,446. 1,660. 767. 1,982.54� 54� 18� ILTOPB(S/B/T)(MG/MC)543( )( )( )( )( )( )( ) 1,490. 1,710. 1,821. 2,061.60� 60� 18� ILTOPB(S/B/T)(MG/MC)603( )( )( )( )( )( )( ) 1,534. 1,761. 1,875. 2,123.


Order Code

Example: ILTOPBSMG54451



BS Edge (S/B/T)MG Foot (MG/MC)54 Depth45 Width1 Height (1/2/3)N Grommet option( ) Grommet finish(114) Worksurface finish(SYN) Edge finish(114) Mount finish(114) Column finish(114) Foot finish



N = None (no grommet)D8 = Narrow slot 8�W (54�)D12 = Narrow Slot 12�W (60�)S = Power square

2. Grommet finish:N = Not applicableD8 / D12= B=Black, W=White(textured)S = 111, 114, 115, 117










Application Notes





64

MX Base Tables - Occasional Heights12�, 15� and 18� HighCairo Shaped Tables


Cairo Shaped Table12� High

54� 45� 12� ILTCY(S/B/T)MG54451( )( )( )( )( )( ) $1,339. $1,326. $1,432. $1,660.60� 48� 12� ILTCY(S/B/T)MG60481( )( )( )( )( )( ) 1,379. 1,366. 1,475. 1,710.



54� 45� 15� ILTCY(S/B/T)MG54452( )( )( )( )( )( ) 1,406. 1,392. 1,504. 1,743.60� 48� 15� ILTCY(S/B/T)MG60482( )( )( )( )( )( ) 1,448. 1,434. 1,549. 1,796.



54� 45� 18� ILTCY(S/B/T)(MG/MC)54453( )( )( )( )( )( ) 1,406. 1,392. 1,504. 1,743.60� 48� 18� ILTCY(S/B/T)(MG/MC)60483( )( )( )( )( )( ) 1,448. 1,434. 1,549. 1,796.


Order Code

Example: ILTCSYSMG54451


T TableCY Cairo Shaped tablesS Edge (S/B/T)MG Foot (MG/MC)54 Depth45 Width1 Hight (1/2/3)N Grommet option( ) Grommet finish(114) Worksurface finish(SYN) Edge finish(114) Mount finish(114) Column finish(114) Foot finish



N = None (no grommet)D4 = Narrow slot 4�WS = Power square






7. Foot finish:Painted/texturedPolished aluminum



*Foot:MG = GlideMC = Casters


Application Notes





65

MX Base Tables - Desk Height29� HighRound Tables




45� 45� 29� ILTRD(S/B/T)(MG/MC)454( )( )( )( )( )( )( ) $1,391. $1,597. $1,700. $1,906.48� 48� 29� ILTRD(S/B/T)(MG/MC)484( )( )( )( )( )( )( ) 1,432. 1,644. 1,750. 1,963.54� 54� 29� ILTRD(S/B/T)(MG/MC)544( )( )( )( )( )( )( ) 1,475. 1,694. 1,803. 2,041.60� 60� 29� ILTRD(S/B/T)(MG/MC)604( )( )( )( )( )( )( ) 1,519. 1,745. 1,857. 2,102.


45� diameter tables feature 3 legs48� 54� & 60� diameter tables feature 4 legs

Order Code



T TableRD RoundS Edge (S/B/T)MG Foot (MG/MC)45 Width4 29� HighN Grommet option( ) Grommet finish(114) Worksurface finish(SYN) Edge finish(114) Mount finish(114) Column finish(114) Foot finish














Application Notes

The following upcharges apply:Beveled Edge (B & T): $500Casters: $30Grommets D8/D12: $120Polished finish: $100 (Mount,Column, Foot or all)




66

MX Base Tables - Desk Height29� HighSquare, Soft Square and Square with Curved Corners Tables



48� 29� ILTSA(S/B/T)(MG/MC)484( )( )( )( )( )( ) $1,446. $1,660. $1,767. $2,058.54� 29� ILTSA(S/B/T)(MG/MC)544( )( )( )( )( )( ) 1,490. 1,710. 1,821. 2,140.60� 29� ILTSA(S/B/T)(MG/MC)604( )( )( )( )( )( ) 1,534. 1,761. 1,875. 2,204.



48� 29� ILTSS(S/B/T)(MG/MC)484( )( )( )( )( )( ) 1,446. 1,660. 1,767. 2,058.54� 29� ILTSS(S/B/T)(MG/MC)544( )( )( )( )( )( ) 1,490. 1,710. 1,821. 2,140.60� 29� ILTSS(S/B/T)(MG/MC)604( )( )( )( )( )( ) 1,534. 1,761. 1,875. 2,204.



48� 29� ILTSC(S/B/T)(MG/MC)484( )( )( )( )( )( ) 1,446. 1,660. 1,767. 2,058.54� 29� ILTSC(S/B/T)(MG/MC)544( )( )( )( )( )( ) 1,490. 1,710. 1,821. 2,140.60� 29� ILTSC(S/B/T)(MG/MC)604( )( )( )( )( )( ) 1,534. 1,761. 1,875. 2,204.


Order Code

Example: ILTSSSMG484


T TableSA Square

SS=Soft SquareSC=Square with Curvedcorners

S Edge (S/B/T)MG Foot (MG/MC)48 Width / Depth4 29� HighN Grommet option( ) Grommet finish(114) Worksurface finish(SYN) Edge finish(114) Mount finish(114) Column finish(114) Foot finish














Application Notes

The following upcharges apply:Beveled Edge (B & T): $650 forSquare TableBeveled Edge (B & T): $500 forSoft Square Table, and Squarewith Curved CornersCasters: $30Grommets D8/D12: $120Polished finish: $100 (Mount,Column, Foot or all)




67

MX Base Tables - Desk Height29� HighSoft Pentagon, Organic Pentagon Type A and B



45�d Table shown

45� 29� ILTPT(S/B/T)(MG/MC)454( )( )( )( )( )( ) $1,826. $2,133. $2,270. $2,521.48� 29� ILTPT(S/B/T)(MG/MC)484( )( )( )( )( )( ) 1,881. 2,197. 2,338. 2,597.54� 29� ILTPT(S/B/T)(MG/MC)544( )( )( )( )( )( ) 1,937. 2,262. 2,408. 2,701.60� 29� ILTPT(S/B/T)(MG/MC)604( )( )( )( )( )( ) 1,995. 2,330. 2,481. 2,782.

*Available with Glides and Casters.45� diameter tables feature 3 legs48�, 54�, 60� diameter tables feature 5 legs


48� 29� ILTOPA(S/B/T)(MG/MC)484( )( )( )( )( )( ) 1,706. 1,959. 2,086. 2,378.54� 29� ILTOPA(S/B/T)(MG/MC)544( )( )( )( )( )( ) 1,758. 2,018. 2,148. 2,473.60� 29� ILTOPA(S/B/T)(MG/MC)604( )( )( )( )( )( ) 1,810. 2,079. 2,213. 2,547.



48� 29� ILTOPB(S/B/T)(MG/MC)484( )( )( )( )( )( ) 1,706. 1,959. 2,086. 2,378.54� 29� ILTOPB(S/B/T)(MG/MC)544( )( )( )( )( )( ) 1,758. 2,018. 2,148. 2,473.60� 29� ILTOPB(S/B/T)(MG/MC)604( )( )( )( )( )( ) 1,810. 2,079. 2,213. 2,547.


Order Code

Example: ILTOPASMG484


T TableOPA Soft Pentagon

OPA=Organic PentagonType AOPB=Organic PentagonType B

S Edge (S/B/T)MG Foot (MG/MC)48 Width4 29� HighN Grommet option( ) Grommet finish(114) Worksurface finish(SYN) Edge finish(114) Mount finish(114) Column finish(114) Foot finish












*Foot:MG= GlideMC = Caster


Application Notes





68

MX Base Tables - Desk Height29� HighCairo Shaped Tables



54� 45� 29� ILTCY(S/B/T)(MG/MC)54454( )( )( )( )( )( )( ) $1,547. $1,532. $1,654. $1,918.60� 48� 29� ILTCY(S/B/T)(MG/MC)60484( )( )( )( )( )( )( ) 1,593. 1,578. 1,704. 1,975.


Order Code

Example: ILTCYSMG54454


T TableCY Cairo Shaped tablesS Edge (S/B/T)MG Foot (MG/MC)54 Width45 Depth4 HightN Grommet option( ) Grommet finish(114) Worksurface finish(SYN) Edge finish(114) Mount finish(114) Column finish(114) Foot finish



N = None (no grommet)D4 = Narrow slot 4�WS = Power square











Application Notes





69

MX Base Tables - Standing Height36� and 42� HighRound Tables




45� 36� ILTRD(S/B/T)MG455( )( )( )( )( )( )( ) $1,418. $1,628. $1,733. $2,020.48� 36� ILTRD(S/B/T)MG485( )( )( )( )( )( )( ) 1,461. 1,677. 1,785. 2,080.54� 36� ILTRD(S/B/T)MG545( )( )( )( )( )( )( ) 1,505. 1,728. 1,839. 2,164.60� 36� ILTRD(S/B/T)MG605( )( )( )( )( )( )( ) 1,550. 1,779. 1,894. 2,229.




45� 42� ILTRD(S/B/T)MG456( )( )( )( )( )( )( ) 1,461. 1,677. 1,785. 2,080.48� 42� ILTRD(S/B/T)MG486( )( )( )( )( )( )( ) 1,505. 1,728. 1,839. 2,143.54� 42� ILTRD(S/B/T)MG546( )( )( )( )( )( )( ) 1,550. 1,779. 1,894. 2,229.60� 42� ILTRD(S/B/T)MG606( )( )( )( )( )( )( ) 1,596. 1,833. 1,951. 2,295.


45� diameter tables feature 3 legs48� 54� & 60� diameter tables feature 4 legs

Order Code



T TableRD RoundS Edge (S/B/T)MG Foot48 Width5 36� High, 6=42� HighN Grommet option( ) Grommet finish(114) Worksurface finish(SYN) Edge finish(114) Mount finish(114) Column finish(114) Foot finish












*Foot:MG = Glide


Application Notes





70

MX Base Tables - Standing Height36� and 42� HighSquare Tables



48� 36� ILTSA(S/B/T)MG485( )( )( )( )( )( )( ) $1,504. $1,727. $1,838. $2,140.54� 36� ILTSA(S/B/T)MG545( )( )( )( )( )( )( ) 1,549. 1,779. 1,893. 2,226.60� 36� ILTSA(S/B/T)MG605( )( )( )( )( )( )( ) 1,596. 1,832. 1,950. 2,293.



48� 42� ILTSA(S/B/T)MG486( )( )( )( )( )( )( ) 1,504. 1,727. 1,838. 2,140.54� 42� ILTSA(S/B/T)MG546( )( )( )( )( )( )( ) 1,549. 1,779. 1,893. 2,226.60� 42� ILTSA(S/B/T)MG606( )( )( )( )( )( )( ) 1,596. 1,832. 1,950. 2,293.


Order Code

Example: ILTSASMG485


T TableSA SquareS Edge (S/B/T)MG Foot48 Width / Depth5 36� High, 6=42� HighN Grommet option( ) Grommet finish(114) Worksurface finish(SYN) Edge finish(114) Mount finish(114) Column finish(114) Foot finish












*Foot:MG= Glide


Application Notes

The following upcharges apply:Beveled Edge (B & T): $650 forSquare TableCasters: $30Grommets D8 /D12: $120Polished finish: $100 (Mount,Column, Foot or all)




71

MX Base Tables - Standing Height36� and 42� HighSoft Square and Square with Curved Corners



48� 36� ILTSA(S/B/T)MG485( )( )( )( )( )( )( ) $1,504. $1,727. $1,838. $2,140.54� 36� ILTSA(S/B/T)MG545( )( )( )( )( )( )( ) 1,549. 1,779. 1,893. 2,226.60� 36� ILTSA(S/B/T)MG605( )( )( )( )( )( )( ) 1,596. 1,832. 1,950. 2,293.



48� 42� ILTSA(S/B/T)MG486( )( )( )( )( )( )( ) 1,504. 1,727. 1,838. 2,140.54� 42� ILTSA(S/B/T)MG546( )( )( )( )( )( )( ) 1,549. 1,779. 1,893. 2,226.60� 42� ILTSA(S/B/T)MG606( )( )( )( )( )( )( ) 1,596. 1,832. 1,950. 2,293.



48� 36� ILTSC(S/B/T)MG485( )( )( )( )( )( )( ) 1,504. 1,727. 1,838. 2,140.54� 36� ILTSC(S/B/T)MG545( )( )( )( )( )( )( ) 1,549. 1,779. 1,893. 2,226.60� 36� ILTSC(S/B/T)MG605( )( )( )( )( )( )( ) 1,596. 1,832. 1,950. 2,293.



48� 42� ILTSC(S/B/T)MG486( )( )( )( )( )( )( ) 1,504. 1,727. 1,838. 2,140.54� 42� ILTSC(S/B/T)MG546( )( )( )( )( )( )( ) 1,549. 1,779. 1,893. 2,226.60� 42� ILTSC(S/B/T)MG606( )( )( )( )( )( )( ) 1,596. 1,832. 1,950. 2,293.


Order Code

Example: ILTSCSMG485


T TableSS Soft Square

SC = Square withCurved corners

S Edge (S/B/T)MG Foot48 Width5 36� High, 6=42� HighN Grommet option( ) Grommet finish(114) Worksurface finish(SYN) Edge finish(114) Mount finish(114) Column finish(114) Foot finish












*Foot:MG = Glide


Application Notes

The following upcharges apply:Beveled Edge (B & T): $500 forSoft Square and Square withCurved corner TablesCasters: $30Grommets D8 /D12: $120Polished finish: $100 (Mount,Column, Foot or all)




72

MX Base Tables - Standing Height36� and 42� HighSoft Pentagon



45�d Table shown

45� 36� ILTSP(S/B/T)MG455( )( )( )( )( )( ) $2,009. $2,346. $2,497. $2,774.48� 36� ILTSP(S/B/T)MG485( )( )( )( )( )( ) 2,069. 2,416. 2,572. 2,857.54� 36� ILTSP(S/B/T)MG545( )( )( )( )( )( ) 2,131. 2,489. 2,649. 2,971.60� 36� ILTSP(S/B/T)MG605( )( )( )( )( )( ) 2,195. 2,563. 2,729. 3,060.


45�d Table shown

45� 42� ILTSP(S/B/T)MG456( )( )( )( )( )( ) 2,009. 2,346. 2,497. 2,774.48� 42� ILTSP(S/B/T)MG486( )( )( )( )( )( ) 2,069. 2,416. 2,572. 2,857.54� 42� ILTSP(S/B/T)MG546( )( )( )( )( )( ) 2,131. 2,489. 2,649. 2,971.60� 42� ILTSP(S/B/T)MG606( )( )( )( )( )( ) 2,195. 2,563. 2,729. 3,060.

45� diameter tables feature 3 legs48�, 54� & 60� diameter tables feature 5 legs

Order Code

Example: ILTPTSMG485


T TablePT Soft PentagonS Edge (S/B/T)MG Foot48 Width5 36� High, 6=42� HighN Grommet option( ) Grommet finish(114) Worksurface finish(SYN) Edge finish(114) Cone finish(114) Column finish(114) Foot finish












*Foot:MG = Glide


Application Notes

The following upcharges apply:Beveled Edge (B & T): $500Casters: $30Grommets D8 /D12: $120Polished finish: $100(Mount,Column, Foot or all)




73

MX Base Tables - Standing Height36� and 42� HighOrganic Pentagon Type A and B



48� 36� ILTOPA(S/B/T)MG485( )( )( )( )( )( )( ) $1,741. $1,998. $2,127. $2,426.54� 36� ILTOPA(S/B/T)MG545( )( )( )( )( )( )( ) 1,793. 2,058. 2,191. 2,523.60� 36� ILTOPA(S/B/T)MG605( )( )( )( )( )( )( ) 1,847. 2,120. 2,257. 2,598.



48� 42� ILTOPA(S/B/T)MG486( )( )( )( )( )( )( ) 1,741. 1,998. 2,127. 2,426.54� 42� ILTOPA(S/B/T)MG546( )( )( )( )( )( )( ) 1,793. 2,058. 2,191. 2,523.60� 42� ILTOPA(S/B/T)MG606( )( )( )( )( )( )( ) 1,847. 2,120. 2,257. 2,598.



48� 36� ILTOPB(S/B/T)MG485( )( )( )( )( )( )( ) 1,741. 1,998. 2,127. 2,426.54� 36� ILTOPB(S/B/T)MG545( )( )( )( )( )( )( ) 1,793. 2,058. 2,191. 2,523.60� 36� ILTOPB(S/B/T)MG605( )( )( )( )( )( )( ) 1,847. 2,120. 2,257. 2,598.



48� 42� ILTOPB(S/B/T)MG486( )( )( )( )( )( )( ) 1,741. 1,998. 2,127. 2,426.54� 42� ILTOPB(S/B/T)MG546( )( )( )( )( )( )( ) 1,793. 2,058. 2,191. 2,523.60� 42� ILTOPB(S/B/T)MG606( )( )( )( )( )( )( ) 1,847. 2,120. 2,257. 2,598.


Order Code

Example: ILTOPASMG5



AOPB=Organic PentagonType B

S Edge (S/B/T)MG Foot48 Width5 36� High, 6=42� HighN Grommet option( ) Grommet finish(114) Worksurface finish(SYN) Edge finish(114) Mount finish(114) Column finish(114) Foot finish



N = None (no grommet)D8 = Narrow slot 8�W (48� &54�)D12 = Narrow slot 12�W (60�)S = Power square









*Foot:MG = Glide


Application Notes





74

MX Base Tables - Standing Height36� and 42� HighCairo Shaped Tables



54� 45� 36� ILTCY(S/B/T)MG54455( )( )( )( )( )( )( ) $1,670. $1,654. $1,787. $2,071.60� 48� 36� ILTCY(S/B/T)MG60485( )( )( )( )( )( )( ) 1,720. 1,704. 1,840. 2,133.



54� 45� 42� ILTCY(S/B/T)MG54456( )( )( )( )( )( )( ) 1,732. 1,715. 1,853. 2,148.60� 48� 42� ILTCY(S/B/T)MG60486( )( )( )( )( )( )( ) 1,748. 1,767. 1,908. 2,212.


Order Code

Example: ILTCYSMG54455


T TableCY Cairo Shaped tablesS Edge (S/B/T)MG Foot54 Width45 Depth5 HightN Grommet option( ) Grommet finish(114) Worksurface finish(SYN) Edge finish(114) Mount finish(114) Column finish(114) Foot finish



N = None (no grommet)D4 = Narrow slot 4�S = Power square

2. Grommet finish:N = Not applicableD4 = Black, W=White (textured)S = 111, 114, 115, 117










Application Notes





75

MX Base Tables - Conference29� High, Horizontal or Vertical GrainRacetrack, Single-Piece Top


Racetrack29� High

48� 96� 29� ILTRT(S/B/T)M96484(H/V)N( )( )( )( ) $2,862. $2,910. $3,104. $3,880.108� 29� ILTRT(S/B/T)M108484(H/V)N( )( )( )( ) 2,921. 2,966. 3,149. 4,883.120� 29� ILTRT(S/B/T)M120484(H/V)N( )( )( )( ) 3,011. 3,058. 3,246. 5,034.

54� 96� 29� ILTRT(S/B/T)M96544(H/V)N( )( )( )( ) 2,950. 3,000. 3,200. 4,550.108� 29� ILTRT(S/B/T)M108544(H/V)N( )( )( )( ) 3,011. 3,058. 3,246. 5,034.120� 29� ILTRT(S/B/T)M120544(H/V)N( )( )( )( ) 3,104. 3,153. 3,347. 5,190.

60� 108� 29� ILTRT(S/B/T)M108604(H/V)N( )( )( )( ) 3,104. 3,153. 3,347. 5,190.120� 29� ILTRT(S/B/T)M120604(H/V)N( )( )( )( ) 3,200. 3,250. 3,450. 5,350.

Order Code

Example: ILTRTSM96544H


T TableRT RacetrackS Edge (S/B/T)M Base MX96 Width54 Depth4 29� HighH Horizontal Grain

DirectionN Grommet option( ) Grommet finish(114) Worksurface finish(SYN) Edge finish(114) Column finish(114) Foot finish



N = None (no grommet)D = Narrow slot (length)P = Power Center with lid(length)G = Power Center no lidW = Wide Cannel with lid set(length) - comes with pre-definedset of lidsM = Wide Channel no lids(length)S = Power SquareGrommet options depend upontable top width:96�W options: N, D12 (2locations), D45 (centered), P9 &G9 (2 locations), W45 & M45(centered), S (2 locations)108�W options: N, D12 (2locations), D54 (centered), P9 &G9 (2 locations), W54 & M54(centered), S (2 locations)120�W options: N, D18 (2locations), D72 (centered), P18& G18 (2 locations), W72 & M72(centered), S (2 locations)

2. Grommet finish:N = Not applicableD: B=Black, W=White (texturedpaint)P: Painted / texturedG: Painted / texturedW: Painted / texturedS = 111, 114, 115, 118









Application Notes

The following upcharges apply:

Beveled Edge (B & T): $800Grommets: D18 = $200D45, D54, D72, M45, M54, M72 =$360P9 & G9 = $260P18 = $340P36 = $490W45 = $880W54 = $1140

Polished finish: $200 (Column,Foot or all)


Edges:B= Thin beveled edge four sidesT= Thick beveled edge four sides


76

MX Base Tables - Conference29� High, Horizontal or Vertical GrainRacetrack, Multi-Piece Top


Racetrack29� High

48� 132� 29� ILTRT(S/B/T)M132484(H/V)N( )( )( )( ) $3,905. $3,952. $4,234. $6,210.144� 29� ILTRT(S/B/T)M144484(H/V)N( )( )( )( ) 4,022. 4,070. 4,361. 6,396.156� 29� ILTRT(S/B/T)M156484(H/V)N( )( )( )( ) 4,143. 4,192. 4,492. 6,588.180� 29� ILTRT(S/B/T)M180484(H/V)N( )( )( )( ) 5,294. 5,339. 5,704. 8,807.216� 29� ILTRT(S/B/T)M216484(H/V)N( )( )( )( ) 5,457. 5,504. 5,881. 9,080.

54� 132� 29� ILTRT(S/B/T)M132544(H/V)N( )( )( )( ) 4,026. 4,074. 4,365. 6,402.144� 29� ILTRT(S/B/T)M144544(H/V)N( )( )( )( ) 4,146. 4,196. 4,496. 6,594.156� 29� ILTRT(S/B/T)M156544(H/V)N( )( )( )( ) 4,271. 4,322. 4,631. 6,792.180� 29� ILTRT(S/B/T)M180544(H/V)N( )( )( )( ) 5,457. 5,504. 5,881. 9,080.216� 29� ILTRT(S/B/T)M216544(H/V)N( )( )( )( ) 5,626. 5,675. 6,063. 9,361.

60� 132� 29� ILTRT(S/B/T)M132604(H/V)N( )( )( )( ) 4,150. 4,200. 4,500. 6,600.144� 29� ILTRT(S/B/T)M144604(H/V)N( )( )( )( ) 4,275. 4,326. 4,635. 6,798.156� 29� ILTRT(S/B/T)M156604(H/V)N( )( )( )( ) 4,403. 4,456. 4,774. 7,002.180� 29� ILTRT(S/B/T)M180604(H/V)N( )( )( )( ) 5,626. 5,675. 6,063. 9,361.216� 29� ILTRT(S/B/T)M216604(H/V)N( )( )( )( ) 5,800. 5,850. 6,250. 9,650.

Order Code

Example: ILTRTSM132484H


T TableRT RacetrackS Edge (S/B/T)M Base MX132 Width48 Depth4 29� HighH Horizontal Grain

DirectionN Grommet option( ) Grommet finish(114) Worksurface finish(114) Edge finish(114) Column finish(114) Foot finish



N = None (no grommet)D = Narrow slot (length)P = Power Center with lid(length)G = Power Center no lidW = Wide Cannel with lid set(length) - comes with pre-definedset of lidsM = Wide Channel no lids(length)S = Power SquareGrommet options depend upontable top width:132�W options: N, D18 (2locations), D72 (centered), P18& G18 (2 locations), W72 & M72(centered), S (2 locations)144�W options: N, D30 (2locations), D90 (centered), P36& G36 (2 locations), W90 & M90(centered), S (2 locations)156�W options: N, D30 (2locations), D99 (centered), P36& G36 (2 locations), W99 & M99(centered), S (3 locations)180�W options: N, D45 (2locations), D126 (centered), P36& G36 (centered), S (4 locations)216�W options: N, D54 (2locations), D153 (centered), P36& G36 (2 locations), W153 &M153 (centered), S (4 locations)






All Worksurfaces are 1 1/4� thick. Height29� is to top of worksurface .



Application Notes


Beveled Edge (B & T): $1600Grommets: D18 = $200D30 = $240D45, D54 = $720D72, M72 = $360D90, D99 = $600D126, D153 = $750P18 = $340P36 = $490W72 = $1450W90 = $1760W99 = $2020W126 = $2380W153 = $2740G18 = $520G36 = $660M90, M99 = $620M126, M153 = $780


All electrical accessories arespecified separately. Refer toAccessories for electricalcomponents pricing.


77

MX Base Tables - Conference29� High, Horizontal or Vertical GrainRectilinear, Single-Piece Top



48� 96� 29� ILTRL(S/B/T)M96484(H/V)N( )( )( )( ) $2,862. $2,910. $3,104. $3,880.108� 29� ILTRL(S/B/T)M108484(H/V)N( )( )( )( ) 2,921. 2,966. 3,149. 4,883.120� 29� ILTRL(S/B/T)M120484(H/V)N( )( )( )( ) 3,011. 3,058. 3,246. 5,034.

54� 96� 29� ILTRL(S/B/T)M96544(H/V)N( )( )( )( ) 2,950. 3,000. 3,200. 4,550.108� 29� ILTRL(S/B/T)M108544(H/V)N( )( )( )( ) 3,011. 3,058. 3,246. 5,034.120� 29� ILTRL(S/B/T)M120544(H/V)N( )( )( )( ) 3,104. 3,153. 3,347. 5,190.

60� 108� 29� ILTRL(S/B/T)M108604(H/V)N( )( )( )( ) 3,104. 3,153. 3,347. 5,190.120� 29� ILTRL(S/B/T)M120604(H/V)N( )( )( )( ) 3,200. 3,250. 3,450. 5,350.

Order Code

Example: ILTRLSM96544H


T TableRL RectilinearS Edge (S/B/T)M Base MX96 Width54 Depth4 29� HighH Horizontal Grain

DirectionN Grommet option( ) Grommet finish(114) Worksurface finish(SYN) Edge finish(114) Column finish(114) Foot finish













Application Notes


Beveled Edge (B & T): $800Grommets: D18 = $200;D45, D54, D72, M45, M54, M72 =$360P9 & G9 = $260P18 = $340P36 = $490W45 = $880W54 = $1140





78

MX Base Tables - Conference29� High, Horizontal or Vertical GrainRectilinear, Multi-Piece Top



48� 132� 29� ILTRL(S/B/T)M132484(H/V)N( )( )( )( ) $3,905. $3,952. $4,234. $6,210.144� 29� ILTRL(S/B/T)M144484(H/V)N( )( )( )( ) 4,022. 4,070. 4,361. 6,396.156� 29� ILTRL(S/B/T)M156484(H/V)N( )( )( )( ) 4,143. 4,192. 4,492. 6,588.180� 29� ILTRL(S/B/T)M180484(H/V)N( )( )( )( ) 5,294. 5,339. 5,704. 8,807.216� 29� ILTRL(S/B/T)M216484(H/V)N( )( )( )( ) 5,457. 5,504. 5,881. 9,080.

54� 132� 29� ILTRL(S/B/T)M132544(H/V)N( )( )( )( ) 4,026. 4,074. 4,365. 6,402.144� 29� ILTRL(S/B/T)M144544(H/V)N( )( )( )( ) 4,146. 4,196. 4,496. 6,594.156� 29� ILTRL(S/B/T)M156544(H/V)N( )( )( )( ) 4,271. 4,322. 4,631. 6,792.180� 29� ILTRL(S/B/T)M180544(H/V)N( )( )( )( ) 5,457. 5,504. 5,881. 9,080.216� 29� ILTRL(S/B/T)M216544(H/V)N( )( )( )( ) 5,626. 5,675. 6,063. 9,361.

60� 132� 29� ILTRL(S/B/T)M132604(H/V)N( )( )( )( ) 4,150. 4,200. 4,500. 6,600.144� 29� ILTRL(S/B/T)M144604(H/V)N( )( )( )( ) 4,275. 4,326. 4,635. 6,798.156� 29� ILTRL(S/B/T)M156604(H/V)N( )( )( )( ) 4,403. 4,456. 4,774. 7,002.180� 29� ILTRL(S/B/T)M180604(H/V)N( )( )( )( ) 5,626. 5,675. 6,063. 9,361.216� 29� ILTRL(S/B/T)M216604(H/V)N( )( )( )( ) 5,800. 5,850. 6,250. 9,650.

Order Code

Example: ILTRLSM132484H


T TableRL RectilinearS Edge (S/B/T)M Base MX132 Width48 Depth4 29� HighH Horizontal Grain













Application Notes






79

MX Base Tables - Conference29� High, Horizontal or Vertical GrainRectilinear with Curved Corners, Single-Piece Top



48� 96� 29� ILTRC(S/B/T)M96484(H/V)N( )( )( )( ) $2,862. $2,910. $3,104. $3,880.108� 29� ILTRC(S/B/T)M108484(H/V)N( )( )( )( ) 2,921. 2,966. 3,149. 4,883.120� 29� ILTRC(S/B/T)M120484(H/V)N( )( )( )( ) 3,011. 3,058. 3,246. 5,034.

54� 96� 29� ILTRC(S/B/T)M96544(H/V)N( )( )( )( ) 2,950. 3,000. 3,200. 4,550.108� 29� ILTRC(S/B/T)M108544(H/V)N( )( )( )( ) 3,011. 3,058. 3,246. 5,034.120� 29� ILTRC(S/B/T)M120544(H/V)N( )( )( )( ) 3,104. 3,153. 3,347. 5,190.

60� 108� 29� ILTRC(S/B/T)M108604(H/V)N( )( )( )( ) 3,104. 3,153. 3,347. 5,190.120� 29� ILTRC(S/B/T)M120604(H/V)N( )( )( )( ) 3,200. 3,250. 3,450. 5,350.

Order Code

Example: ILTRCSM96544H



CornersS Edge (S/B/T)M Base MX96 Width54 Depth4 29� HighH Horizontal Grain














Application Notes







80

MX Base Tables - Conference29� High, Horizontal or Vertical GrainRectilinear with Curved Corners, Multi-Piece Top



48� 132� 29� ILTRC(S/B/T)M132484(H/V)N( )( )( )( ) $3,905. $3,952. $4,232. $6,210.144� 29� ILTRC(S/B/T)M144484(H/V)N( )( )( )( ) 4,022. 4,070. 4,361. 6,396.156� 29� ILTRC(S/B/T)M156484(H/V)N( )( )( )( ) 4,143. 4,192. 4,492. 6,588.180� 29� ILTRC(S/B/T)M180484(H/V)N( )( )( )( ) 5,294. 5,339. 5,704. 8,807.216� 29� ILTRC(S/B/T)M216484(H/V)N( )( )( )( ) 5,457. 5,504. 5,881. 9,080.

54� 132� 29� ILTRC(S/B/T)M132544(H/V)N( )( )( )( ) 4,026. 4,074. 4,365. 6,402.144� 29� ILTRC(S/B/T)M144544(H/V)N( )( )( )( ) 4,146. 4,196. 4,496. 6,594.156� 29� ILTRC(S/B/T)M156544(H/V)N( )( )( )( ) 4,271. 4,322. 4,631. 6,792.180� 29� ILTRC(S/B/T)M180544(H/V)N( )( )( )( ) 5,457. 5,504. 5,881. 9,080.216� 29� ILTRC(S/B/T)M216544(H/V)N( )( )( )( ) 5,626. 5,675. 6,063. 9,361.

60� 132� 29� ILTRC(S/B/T)M132604(H/V)N( )( )( )( ) 4,150. 4,200. 4,500. 6,600.144� 29� ILTRC(S/B/T)M144604(H/V)N( )( )( )( ) 4,275. 4,326. 4,635. 6,798.156� 29� ILTRC(S/B/T)M156604(H/V)N( )( )( )( ) 4,403. 4,456. 4,774. 7,002.180� 29� ILTRC(S/B/T)M180604(H/V)N( )( )( )( ) 5,626. 5,675. 6,063. 9,361.216� 29� ILTRC(S/B/T)M216604(H/V)N( )( )( )( ) 5,800. 5,850. 6,250. 9,650.

Order Code

Example: ILTRCSM132484(H/V)



CornersS Edge (S/B/T)M Base MX132 Width48 Depth4 29� HighH Horizontal Grain













Application Notes






81

MX Base Tables - Conference29� High, Horizontal or Vertical GrainRound Rectilinear, Single-Piece Top



48� 96� 29� ILTRR(S/B/T)M96484(H/V)N( )( )( )( ) $2,862. $2,910. $3,104. $3,880.108� 29� ILTRR(S/B/T)M108484(H/V)N( )( )( )( ) 2,921. 2,966. 3,149. 4,883.120� 29� ILTRR(S/B/T)M120484(H/V)N( )( )( )( ) 3,011. 3,058. 3,246. 5,034.

54� 96� 29� ILTRR(S/B/T)M96544(H/V)N( )( )( )( ) 2,950. 3,000. 3,200. 4,550.108� 29� ILTRR(S/B/T)M108544(H/V)N( )( )( )( ) 3,011. 3,058. 3,246. 5,034.120� 29� ILTRR(S/B/T)M120544(H/V)N( )( )( )( ) 3,104. 3,153. 3,347. 5,190.

60� 108� 29� ILTRR(S/B/T)M108604(H/V)N( )( )( )( ) 3,104. 3,153. 3,347. 5,190.120� 29� ILTRR(S/B/T)M120604(H/V)N( )( )( )( ) 3,200. 3,250. 3,450. 5,350.

Order Code

Example: ILTRRSM96544H


T TableRR Round RectilinearS Edge (S/B/T)M Base MX96 Width54 Depth4 29� HighH Horizontal Grain














Application Notes







82

MX Base Tables - Conference29� High, Horizontal or Vertical GrainRound Rectilinear, Multi-Piece Top



48� 132� 29� ILTRR(S/B/T)M132484(H/V)N( )( )( )( ) $3,622. $3,670. $3,952. $6,022.144� 29� ILTRR(S/B/T)M144484(H/V)N( )( )( )( ) 3,731. 3,780. 4,070. 6,202.156� 29� ILTRR(S/B/T)M156484(H/V)N( )( )( )( ) 3,843. 3,893. 4,192. 6,388.180� 29� ILTRR(S/B/T)M180484(H/V)N( )( )( )( ) 5,020. 5,111. 5,385. 8,488.216� 29� ILTRR(S/B/T)M216484(H/V)N( )( )( )( ) 5,175. 5,269. 5,551. 8,750.

54� 132� 29� ILTRR(S/B/T)M132544(H/V)N( )( )( )( ) 3,735. 3,783. 4,074. 6,202.144� 29� ILTRR(S/B/T)M144544(H/V)N( )( )( )( ) 3,847. 3,896. 4,196. 6,394.156� 29� ILTRR(S/B/T)M156544(H/V)N( )( )( )( ) 3,962. 4,013. 4,322. 6,586.180� 29� ILTRR(S/B/T)M180544(H/V)N( )( )( )( ) 5,175. 5,269. 5,551. 8,750.216� 29� ILTRR(S/B/T)M216544(H/V)N( )( )( )( ) 5,335. 5,432. 5,723. 9,021.

60� 132� 29� ILTRR(S/B/T)M132604(H/V)N( )( )( )( ) 3,850. 3,900. 4,200. 6,400.144� 29� ILTRR(S/B/T)M144604(H/V)N( )( )( )( ) 3,966. 4,017. 4,326. 6,592.156� 29� ILTRR(S/B/T)M156604(H/V)N( )( )( )( ) 4,084. 4,138. 4,456. 6,790.180� 29� ILTRR(S/B/T)M180604(H/V)N( )( )( )( ) 5,335. 5,432. 5,723. 9,021.216� 29� ILTRR(S/B/T)M216604(H/V)N( )( )( )( ) 5,500. 5,600. 5,551. 8,750.

Order Code

Example: ILTRRSM132484H


T TableRR Round RectilinearS Edge (S/B/T)M Base MX132 Width48 Depth4 29� HighH Horizontal Grain













Application Notes






83

MX Base Tables - Conference29� High, Horizontal or Vertical GrainSoft Rectilinear, Single-Piece Top



48� 96� 29� ILTSR(S/B/T)M96484(H/V)N( )( )( )( ) $2,862. $2,910. $3,104. $3,880.108� 29� ILTSR(S/B/T)M108484(H/V)N( )( )( )( ) 2,921. 2,966. 3,149. 4,883.120� 29� ILTSR(S/B/T)M120484(H/V)N( )( )( )( ) 3,011. 3,058. 3,246. 5,034.

54� 96� 29� ILTSR(S/B/T)M96544(H/V)N( )( )( )( ) 2,950. 3,000. 3,200. 4,550.108� 29� ILTSR(S/B/T)M108544(H/V)N( )( )( )( ) 3,011. 3,058. 3,246. 5,034.120� 29� ILTSR(S/B/T)M120544(H/V)N( )( )( )( ) 3,104. 3,153. 3,347. 5,190.

60� 108� 29� ILTSR(S/B/T)M108604(H/V)N( )( )( )( ) 3,104. 3,153. 3,347. 5,190.120� 29� ILTSR(S/B/T)M120604(H/V)N( )( )( )( ) 3,200. 3,250. 3,450. 5,350.

Order Code

Example: ILTSRSM96544H


T TableSR Soft RectilinearS Edge (S/B/T)M Base MX96 Width54 Depth4 29� HighH Horizontal Grain














Application Notes







84

MX Base Tables - Conference29� High, Horizontal or Vertical GrainSoft Rectilinear, Multi-Piece Top



48� 132� 29� ILTSR(S/B/T)M132484(H/V)N( )( )( )( ) $3,905. $3,952. $4,234. $6,210.144� 29� ILTSR(S/B/T)M144484(H/V)N( )( )( )( ) 4,022. 4,070. 4,361. 6,396.156� 29� ILTSR(S/B/T)M156484(H/V)N( )( )( )( ) 4,143. 4,192. 4,492. 6,588.180� 29� ILTSR(S/B/T)M180484(H/V)N( )( )( )( ) 5,294. 5,339. 5,704. 8,807.216� 29� ILTSR(S/B/T)M216484(H/V)N( )( )( )( ) 5,457. 5,504. 5,881. 9,080.

54� 132� 29� ILTSR(S/B/T)M132544(H/V)N( )( )( )( ) 4,026. 4,074. 4,365. 6,402.144� 29� ILTSR(S/B/T)M144544(H/V)N( )( )( )( ) 4,146. 4,196. 4,496. 6,594.156� 29� ILTSR(S/B/T)M156544(H/V)N( )( )( )( ) 4,271. 4,322. 4,631. 6,792.180� 29� ILTSR(S/B/T)M180544(H/V)N( )( )( )( ) 5,457. 5,504. 5,881. 9,080.216� 29� ILTSR(S/B/T)M216544(H/V)N( )( )( )( ) 5,626. 5,675. 6,063. 9,361.

60� 132� 29� ILTSR(S/B/T)M132604(H/V)N( )( )( )( ) 4,150. 4,200. 4,500. 6,600.144� 29� ILTSR(S/B/T)M144604(H/V)N( )( )( )( ) 4,275. 4,326. 4,635. 6,798.156� 29� ILTSR(S/B/T)M156604(H/V)N( )( )( )( ) 4,403. 4,456. 4,774. 7,002.180� 29� ILTSR(S/B/T)M180604(H/V)N( )( )( )( ) 5,626. 5,675. 6,063. 9,361.216� 29� ILTSR(S/B/T)M216604(H/V)N( )( )( )( ) 5,800. 5,850. 6,250. 9,650.

Order Code

Example: ILTSRSM132484H


T TableSR Soft RectilinearS Edge (S/B/T)M Base MX132 Width48 Depth4 29� HighH Horizontal Grain













Application Notes






85

MX Base Tables - Conference29� High, Horizontal or Vertical GrainElongated Hexagon, Single-Piece Top


Elongated Hexagon29� High

48� 96� 29� ILTEH(S/B/T)M96484(H/V)N( )( )( )( ) $2,862. $2,910. $3,104. $3,880.108� 29� ILTEH(S/B/T)M108484(H/V)N( )( )( )( ) 2,921. 2,966. 3,149. 4,883.120� 29� ILTEH(S/B/T)M120484(H/V)N( )( )( )( ) 3,011. 3,058. 3,246. 5,034.

54� 96� 29� ILTEH(S/B/T)M96544(H/V)N( )( )( )( ) 2,950. 3,000. 3,200. 4,550.108� 29� ILTEH(S/B/T)M108544(H/V)N( )( )( )( ) 3,011. 3,058. 3,246. 5,034.120� 29� ILTEH(S/B/T)M120544(H/V)N( )( )( )( ) 3,104. 3,153. 3,347. 5,190.

60� 108� 29� ILTEH(S/B/T)M108604(H/V)N( )( )( )( ) 3,104. 3,153. 3,347. 5,190.120� 29� ILTEH(S/B/T)M120604(H/V)N( )( )( )( ) 3,200. 3,250. 3,450. 5,350.

Order Code

Example: ILTEHSM96544H


T TableEH Elongated HexagonS Edge (S/B/T)M Base MX96 Width54 Depth4 29� HighH Horizontal Grain














Application Notes


Beveled Edge (B & T): $800Grommets: D18 = $200;D45, D54, D72, M45, M54, M72 =$360P9 & G9 = $260P18 = $340;P36 = $490W45 = $880W54 = $1140





86

MX Base Tables - Conference29� High, Horizontal or Vertical GrainElongated Hexagon, Multi-Piece Top


Elongated Hexagon29� High

48� 132� 29� ILTEH(S/B/T)M132484(H/V)N( )( )( )( ) $3,622. $3,670. $3,952. $6,022.144� 29� ILTEH(S/B/T)M144484(H/V)N( )( )( )( ) 3,731. 3,780. 4,070. 6,202.156� 29� ILTEH(S/B/T)M156484(H/V)N( )( )( )( ) 3,843. 3,893. 4,192. 6,388.180� 29� ILTEH(S/B/T)M180484(H/V)N( )( )( )( ) 5,020. 5,111. 5,385. 8,488.216� 29� ILTEH(S/B/T)M216484(H/V)N( )( )( )( ) 5,175. 5,269. 5,551. 8,750.

54� 132� 29� ILTEH(S/B/T)M132544(H/V)N( )( )( )( ) 3,735. 3,783. 4,074. 6,202.144� 29� ILTEH(S/B/T)M144544(H/V)N( )( )( )( ) 6,847. 3,896. 4,196. 6,394.156� 29� ILTEH(S/B/T)M156544(H/V)N( )( )( )( ) 3,962. 4,013. 4,322. 6,586.180� 29� ILTEH(S/B/T)M180544(H/V)N( )( )( )( ) 5,175. 5,269. 5,551. 8,750.216� 29� ILTEH(S/B/T)M216544(H/V)N( )( )( )( ) 5,335. 5,432. 5,723. 9,021.

60� 132� 29� ILTEH(S/B/T)M132604(H/V)N( )( )( )( ) 3,850. 3,900. 4,200. 6,400.144� 29� ILTEH(S/B/T)M144604(H/V)N( )( )( )( ) 3,966. 4,017. 4,326. 6,592.156� 29� ILTEH(S/B/T)M156604(H/V)N( )( )( )( ) 4,084. 4,138. 4,456. 6,790.180� 29� ILTEH(S/B/T)M180604(H/V)N( )( )( )( ) 5,335. 5,432. 5,723. 9,021.216� 29� ILTEH(S/B/T)M216604(H/V)N( )( )( )( ) 5,500. 5,600. 5,551. 8,750.

Order Code

Example: ILTEHSM132484H


T TableEH Elongated HexagonS Edge (S/B/T)M Base MX132 Width48 Depth4 29� HighH Horizontal Grain













Application Notes






87

MX Base Tables - Conference29� High, Horizontal or Vertical GrainCairo Shaped Tables, Single-Piece Top



48� 96� 29� ILTCY(S/B/T)M96484(H/V)N( )( )( )( ) $2,862. $2,910. $3,104. $3,880.108� 29� ILTCY(S/B/T)M108484(H/V)N( )( )( )( ) 2,921. 2,966. 3,149. 4,883.120� 29� ILTCY(S/B/T)M120484(H/V)N( )( )( )( ) 3,011. 3,058. 3,246. 5,034.

54� 96� 29� ILTCY(S/B/T)M96544(H/V)N( )( )( )( ) 2,950. 3,000. 3,200. 4,550.108� 29� ILTCY(S/B/T)M108544(H/V)N( )( )( )( ) 3,011. 3,058. 3,246. 5,034.120� 29� ILTCY(S/B/T)M120544(H/V)N( )( )( )( ) 3,104. 3,153. 3,347. 5,190.

60� 108� 29� ILTCY(S/B/T)M108604(H/V)N( )( )( )( ) 3,104. 3,153. 3,347. 5,190.120� 29� ILTCY(S/B/T)M120604(H/V)N( )( )( )( ) 3,200. 3,250. 3,450. 5,350.

Order Code

Example: ILTCYSM96544H


T TableCY Cairo Shaped TableS Edge (S/B/T)M Base MX96 Width54 Depth4 29� HighH Horizontal Grain














Application Notes







88

MX Base Tables - Conference29� High, Horizontal or Vertical GrainCairo Shaped Tables, Multi-Piece Top



48� 132� 29� ILTCY(S/B/T)M132484(H/V)N( )( )( )( ) $3,622. $3,670. $3,952. $6,022.144� 29� ILTCY(S/B/T)M144484(H/V)N( )( )( )( ) 3,731. 3,780. 4,070. 6,202.156� 29� ILTCY(S/B/T)M156484(H/V)N( )( )( )( ) 3,843. 3,893. 4,192. 6,388.180� 29� ILTCY(S/B/T)M180484(H/V)N( )( )( )( ) 5,020. 5,111. 5,385. 8,488.216� 29� ILTCY(S/B/T)M216484(H/V)N( )( )( )( ) 5,175. 5,269. 5,551. 8,750.

54� 132� 29� ILTCY(S/B/T)M132544(H/V)N( )( )( )( ) 3,735. 3,783. 4,074. 6,202.144� 29� ILTCY(S/B/T)M144544(H/V)N( )( )( )( ) 3,847. 3,896. 4,196. 6,394.156� 29� ILTCY(S/B/T)M156544(H/V)N( )( )( )( ) 3,962. 4,013. 4,322. 6,586.180� 29� ILTCY(S/B/T)M180544(H/V)N( )( )( )( ) 5,175. 5,269. 5,551. 8,750.216� 29� ILTCY(S/B/T)M216544(H/V)N( )( )( )( ) 5,335. 5,432. 5,723. 9,021.

60� 132� 29� ILTCY(S/B/T)M132604(H/V)N( )( )( )( ) 3,850. 3,900. 4,200. 6,400.144� 29� ILTCY(S/B/T)M144604(H/V)N( )( )( )( ) 3,966. 4,017. 4,326. 6,592.156� 29� ILTCY(S/B/T)M156604(H/V)N( )( )( )( ) 4,084. 4,138. 4,456. 6,790.180� 29� ILTCY(S/B/T)M180604(H/V)N( )( )( )( ) 5,335. 5,432. 5,723. 9,021.216� 29� ILTCY(S/B/T)M216604(H/V)N( )( )( )( ) 5,500. 5,600. 5,551. 8,750.

Order Code

Example: ILTCYSM132484H


T TableRC Cairo Shaped TablesS Edge (S/B/T)M Base MX132 Width48 Depth4 29� HighH Horizontal Grain













Application Notes






89

Electrical Units - Drop-inDesktop Outlets

description type pattern no. list

Electrical Outlet for Tables Drop-in110, 1 power + 1 dual USB + 0 data

72� cordset ILED11072(BB/WW) $315.120� cordset ILED110120(BB/WW) 327.12� linkable ILED110L(BB/WW) 345.72� hardwired ILED110H(BB/WW) 363.


72� cordset ILED20272(BB/WW) 278.120� cordset ILED202120(BB/WW) 290.12� linkable ILED202L(BB/WW) 309.72� hardwired ILED202H(BB/WW) 329.





Order Code

Example: ILED11072BB


E Electrical AccessoriesD Drop-in Desktop Outlet110 1 Power, 1 dual USB, 0

Data72 72� Cordset

120=120� cordsetL = LinkableH = Hardwired

BB Color option


To order please specify patternnumber including:1. Color option, (housing/bracket):

BB = Black / BlackWW = White / White

Application Notes

Installation instructions availableon Knoll.com+.

Refer to planning guide pages forcomplete description.

USB / USB-C outlets are forrecharging purposes only. No datatransfer. All desktop outlets are ULlisted.

Simplex receptacles and USBcharging ports are wired together onthe same circuit.

Units with data ports come withTech Adapters.Connectors and jacks are notincluded are available from thirdparty vendors. Refer to ‘‘TechAdapter Master List’’ for compatiblejacks and connectors.


90

Electrical Units - Drop-inDesktop Outlets


Electrical Outlet for Tables Drop-in21C, 2 power + 1 dual USB + 1 USB-C

72� cordset ILED21C72(BB/WW) $562.120� cordset ILED21C120(BB/WW) 582.12� linkable ILED21CL(BB/WW) 603.72� hardwired ILED21CH(BB/WW) 621.



Order Code

Example: ILED11072BB


E Electrical AccessoriesD Drop-in Desktop Outlet110 1 Power, 1 dual USB, 0



BB Color option




Application Notes







91

Electrical Units - Drop-inInfeeds and Jumper CablesLinkable Power Outlets

description type d w pattern no. list

Infeeds for Linkable Drop-in Outlets infeed cable, 60� cord 3� 79.5� ILEI60 $480.infeed cable, 120� cord 3� 139.5� ILEI120 499.

Jumpers for Linkable Drop-in Outlets jumper cable, 24� 2� 24� ILEJ24 95.jumper cable, 30� 2� 30� ILEJ30 97.jumper cable, 36� 2� 36� ILEJ36 99.jumper cable, 42� 2� 42� ILEJ42 101.jumper cable, 48� 2� 48� ILEJ48 104.jumper cable, 54� 2� 54� ILEJ54 107.jumper cable, 60� 2� 60� ILEJ60 110.jumper cable, 66� 2� 66� ILEJ66 113.jumper cable, 72� 2� 72� ILEJ72 116.jumper cable, 78� 2� 78� ILEJ78 122.jumper cable, 84� 2� 84� ILEJ84 125.jumper cable, 90� 2� 90� ILEJ90 129.jumper cable, 96� 2� 96� ILEJ96 132.jumper cable, 102� 2� 102� ILEJ102 136.jumper cable, 108� 2� 108� ILEJ108 139.jumper cable, 114� 2� 114� ILEJ114 142.jumper cable, 120� 2� 120� ILEJ120 146.jumper cable, 126� 2� 126� ILEJ126 150.jumper cable, 132� 2� 132� ILEJ132 155.

Order Code

Example: ILEI60


E Electrical AccessoriesI Power Infeed60 60� long


To order please specify patternnumber including:1. Pattern number:

Application Notes

Infeed Cables and Jumpers on thispage are for use with LinkableDesktop Electrical outlets.


92

Electrical Units - Power SquareDesktop Outlets


Power Square Outlet for Tables2 Outlets, 2 Blanks

cordset, 120� cord 3.375� 3.375� ILEPSPNPN(W/G/B)C $428.hardwire, 120� whip 3.375� 3.375� ILEPSPNPN(W/G/B)H 536.linkable, 60� link 3.375� 3.375� ILEPSPNPN(W/G/B)L 611.

Power Square Outlet for Tables3 Outlets, 1 Blanks

cordset, 120� cord 3.375� 3.375� ILEPSPPPN(W/G/B)C 536.hardwire, 120� whip 3.375� 3.375� ILEPSPPPN(W/G/B)H 643.linkable, 60� link 3.375� 3.375� ILEPSPPPN(W/G/B)L 718.

Power Square Outlet for Tables3 Outlets, 1 dual USB

cordset, 120� cord 3.375� 3.375� ILEPSPPPU(W/G/B)C 803.hardwire, 120� whip 3.375� 3.375� ILEPSPPPU(W/G/B)H 911.linkable, 60� link 3.375� 3.375� ILEPSPPPU(W/G/B)L 986.

Power Square Outlet for Tables2 Outlets, 2 dual USB

cordset, 120� cord 3.375� 3.375� ILEPSPUPU(W/G/B)C 964.hardwire, 120� whip 3.375� 3.375� ILEPSPUPU(W/G/B)H 1,071.linkable, 60� link 3.375� 3.375� ILEPSPUPU(W/G/B)L 1,146.

Power Square Outlet for Tables3 Outlets, 1 HDMI port

cordset, 120� cord 3.375� 3.375� ILEPSPPPH(W/G/B)C 835.hardwire, 120� whip 3.375� 3.375� ILEPSPPPH(W/G/B)H 942.linkable, 60� link 3.375� 3.375� ILEPSPPPH(W/G/B)L 1,018.

Order Code

Example: ILEPSPNPNWC


E Electrical AccessoriesPS Power Square Desktop

OutletPNPN 2 Outlets, 2 BlanksW WhiteC Cordset


To order please specify patternnumber including:1. Color Code:

W = WhiteG = Medium GreyB = Black

Application Notes

Power Square application is usedwith type S grommet option onIslands Tables. Type S grommetcutout size is 3� square.

USB outlets are for rechargingpurposes only. No data transfer. Alldesktop outlets are UL listed.


Linking power starter and linkingpower extenders required forlinkable power square option.




93

Electrical Units - Power SquareDesktop Outlets


Power Square Outlet for Tables2 Outlets, 1 HDMI port, 1 Ethernet port

cordset, 120� cord 3.375� 3.375� ILEPSPHPE(W/G/B)C $814.hardwire, 120� whip 3.375� 3.375� ILEPSPHPE(W/G/B)H 921.linkable, 60� link 3.375� 3.375� ILEPSPHPE(W/G/B)L 996.

Power Square Outlet for Tables2 Outlets, 1 dual USB, 1 HDMI port

cordset, 120� cord 3.375� 3.375� ILEPSPHPU(W/G/B)C 942.hardwire, 120� whip 3.375� 3.375� ILEPSPHPU(W/G/B)H 1,125.linkable, 60� link 3.375� 3.375� ILEPSPHPU(W/G/B)L 1,050.

Power Square Outlet for Tables2 Outlets, 1 dual USB, 1 Ethernet port

cordset, 120� cord 3.375� 3.375� ILEPSPEPU(W/G/B)C 942.hardwire, 120� whip 3.375� 3.375� ILEPSPEPU(W/G/B)H 1,125.linkable, 60� link 3.375� 3.375� ILEPSPEPU(W/G/B)L 1,050.

Order Code

Example: ILEPSPNPNWC


E Electrical AccessoriesPS Power Square Desktop

OutletPNPN 2 Outlets, 2 BlanksW WhiteC Cordset


To order please specify patternnumber including:1. Color Code:

W = WhiteG = Medium GreyB = Black

Application Notes

Power Square application is usedwith type S grommet option onIslands Tables. Type S grommetcutout size is 3� square.

USB outlets are for rechargingpurposes only. No data transfer. Alldesktop outlets are UL listed.


Linking power starter and linkingpower extenders required forlinkable power square option.




94

Electrical Units - Power SquareLinking Power Extender and Power Starter


Linking Power Extenderfor Power Square

linkable, 24� extender cable 24� ILEPLJ24 $129.

Linking Power Starterfor Power Square

cordset, 72�, cord 72� ILEPLS72 626.cordset, 120�, cord 120� ILEPLS120 643.

Order Code

Example: ILEPLJ24


E Electrical AccessoriesPL Power Square LinkageJ Linking Power Extender24 24� long

Specification Information Application Notes

Power Starter and Power Extenderare used on linkable Islands powerSquare Outlets.




95

Electrical Units - Clamp-OnElectrical Outlets


Clamp-on Electric Outlet110, 1 Power + 1 USB

72� Cordset ILEC11072(WW/BB) $315.120� Cordset ILEC110120(WW/BB) 315.Hardwired ILEC110H(WW/BB) 315.

Clamp-on Electric Outlet202, 2 Power + 2 Data Ports

72� Cordset ILEC20272(WW/BB) 252.120� Cordset ILEC202120(WW/BB) 252.Hardwired ILEC202H(WW/BB) 252.Linkable ILEC202L(WW/BB) 252.



Clamp-on Electric Outlet311, 3 Power + 1 USB + Data Port


Clamp-on Electric Outlet412, 4 Power + 1 USB + 2 Data Ports


Order Code

Example: ILEC11072BB


E Electrical AccessoriesC Clamp On Electric

Outlet110 1 Power, 1 dual USB, 0



BB Color option




Application Notes







96

Electrical Units - Clamp-OnElectrical Outlets


Clamp-on Electric Outlet21C, 2 Power + 1 USB + 1 USB C

72� Cordset ILEC21C72(WW/BB) $525.120� Cordset ILEC21C120(WW/BB) 525.Hardwired ILEC21CH(WW/BB) 525.Linkable ILEC21CL(WW/BB) 525.

Order Code







BB Color option




Application Notes







97

Electrical Units - Offset Clamp-OnElectrical Outlets


Offset Clamp-on Electric Outlet110, 1 Power + 1 USB

72� Cordset ILEO11072(WW/BB) $315.120� Cordset ILEO110120(WW/BB) 315.Hardwired ILEO110H(WW/BB) 315.

Offset Clamp-on Electric Outlet202, 2 Power + 2 Data Ports

72� Cordset ILEO20272(WW/BB) 252.120� Cordset ILEO202120(WW/BB) 252.Hardwired ILEO202H(WW/BB) 252.Linkable ILEO202L(WW/BB) 252.



Offset Clamp-on Electric Outlet311, 3 Power + 1 USB + Data Port


Offset Clamp-on Electric Outlet412, 4 Power + 1 USB + 2 Data Ports


Order Code

Example: ILEO11072BB


E Electrical AccessoriesO Offset Clamp On

Electrical Outlet110 1 Power, 1 dual USB, 0



BB Color option




Application Notes







98

Electrical Units - Offset Clamp-OnElectrical Outlets


Offset Clamp-on Electric Outlet21C, 2 Power + 1 USB + 1 USB C

72� Cordset ILEO21C72(WW/BB) $525.120� Cordset ILEO21C120(WW/BB) 525.Hardwired ILEO21CH(WW/BB) 525.Linkable ILEO21CL(WW/BB) 525.

Order Code







BB Color option




Application Notes







99

Electrical Units - for ChicagoClamp-On Electrical Outlets



108� whip ILECC110108(WW/BB) $315.

Clamp-on Electric Outlet202, 2 Power + 2 Data Ports

108� whip ILECC202108(WW/BB) 252.


108� whip ILECC210108(WW/BB) 315.

Clamp-on Electric Outlet311, 3 Power + 1 USB + Data Port

108� whip ILECC311108(WW/BB) 373.

Clamp-on Electric Outlet412, 4 Power + 1 USB + 2 Data Ports

108� whip ILECC412108(WW/BB) 467.

Order Code







BB Color option




Application Notes







100

Electrical Units - for ChicagoClamp-On Electrical Outlets


Clamp-on Electric Outlet21C, 2 Power + 1 USB + 1 USB C

108� whip ILECC21CC108(WW/BB) $525.

Order Code







BB Color option




Application Notes







101

Electrical Units - for ChicagoOffset Clamp-On Electrical Outlets



108� whip ILEOC110108(WW/BB) $315.

Offset Clamp-on Electric Outlet202, 2 Power + 2 Data Ports

108� whip ILEOC202108(WW/BB) 252.


108� whip ILEOC210108(WW/BB) 315.

Offset Clamp-on Electric Outlet311, 3 Power + 1 USB + Data Port

108� whip ILEOC311108(WW/BB) 373.

Offset Clamp-on Electric Outlet412, 4 Power + 1 USB + 2 Data Port

108� whip ILEOC412108(WW/BB) 467.

Order Code







BB Color option




Application Notes







102

Electrical Units - for ChicagoOffset Clamp-On Electrical Outlets


Offset Clamp-on Electric Outlet21C, 2 Power + 1 USB + 1 USB C

108� whip ILEOC21C108(WW/BB) $525.

Order Code







BB Color option




Application Notes







103

Electrical Units - UndermountElectrical Outlets


Undermount Electric Outlet110, 1 Power + 1 USB

72� Cordset ILEU11072(WW/BB) $315.120� Cordset ILEU110120(WW/BB) 315.Hardwired ILEU110H(WW/BB) 315.

Undermount Electric Outlet202, 2 Power + 2 Data Ports

72� Cordset ILEU20272(WW/BB) 252.120� Cordset ILEU202120(WW/BB) 252.Hardwired ILEU202H(WW/BB) 252.Linkable ILEU202L(WW/BB) 252.

Undermount Electric Outlet210, 2 Power + 1 USB


Undermount Electric Outlet311, 3 Power + 1 USB + Data Port


Undermount Electric Outlet412, 4 Power + 1 USB + 2 Data Ports


Undermount Electric Outlet21C, 2 Power + 1 USB + 1 USB C

72� Cordset ILEU21C72(WW/BB) 525.120� Cordset ILEU21C120(WW/BB) 525.Hardwired ILEU21CH(WW/BB) 525.Linkable ILEU21CL(WW/BB) 525.

Order Code







BB Color option




Application Notes







104

Electrical Units - Wide Channel Desktop OutletsElectrical Outlets


Wide Channel Desktop Electric Outlet110, 1 Power + 1 USB

72� Cordset ILEW11072(BB/WW) $290.120� Cordset ILEW110120(BB/WW) 290.Hardwired ILEW110H(BB/WW) 310.Linkable ILEW110L(BB/WW) 310.

Wide Channel Desktop Electric Outlet202, 2 Power + 2 Data Ports

72� Cordset ILEW20272(BB/WW) 240.120� Cordset ILEW202120(BB/WW) 240.Hardwired ILEW202H(BB/WW) 250.Linkable ILEW202L(BB/WW) 250.

Wide Channel Desktop Electric Outlet210, 2 Power + 1 USB

72� Cordset ILEW21072(WW/BB) 340.120� Cordset ILEW210120(WW/BB) 340.Hardwired ILEW210H(WW/BB) 350.Linkable ILEW210L(WW/BB) 350.

Wide Channel Desktop Electric Outlet311, 3 Power + 1 USB + Data Port


Wide Channel Desktop Electric Outlet412, 4 Power + 1 USB + 2 Data Ports


Order Code

Example: ILEW11072BB


E Electrical AccessoriesW Wide Channel Desktop




BB Color option




Application Notes







105

Electrical Units - Wide Channel Desktop OutletsElectrical Outlets


Wide Channel Desktop Electric Outlet21C, 2 Power + 1 USB + 1 USB C

72� Cordset ILEW21C72(WW/BB) $540.120� Cordset ILEW21C120(WW/BB) 540.Hardwired ILEW21CH(WW/BB) 580.Linkable ILEW21CL(WW/BB) 580.

Order Code

Example: ILEW11072BB


E Electrical AccessoriesW Wide Channel Desktop




BB Color option




Application Notes







106

Wire ManagementCable Clips

description type d w h pattern no. list

Cable Clips - X-Base Table set of 3 2.3� 2.8� 1� ILECX1 $30.

Cable Clips - MX-Base Table set of 3 .8� 1.2� 1� ILECM1 30.

Order Code

Example: ILECX1


E Electrical AccessoriesCX Cable clip for X-Base1 Set of 3

Specification Information Application Notes

Cable clips are clear.

All electrical accessories arespecified separately.Refer to Accessories section forelectrical component pricing.


107

pattern no. page

ILEC110120(WW/BB) 96

ILEC11072(WW/BB) 96

ILEC110H(WW/BB) 96


ILEC20272(WW/BB) 96

ILEC202H(WW/BB) 96

ILEC202L(WW/BB) 96


ILEC21072(WW/BB) 96

ILEC210H(WW/BB) 96

ILEC210L(WW/BB) 96

ILEC21C120(WW/BB) 97

ILEC21C72(WW/BB) 97

ILEC21CH(WW/BB) 97

ILEC21CL(WW/BB) 97


ILEC31172(WW/BB) 96

ILEC311H(WW/BB) 96

ILEC311L(WW/BB) 96


ILEC41272(WW/BB) 96

ILEC412H(WW/BB) 96

ILEC412L(WW/BB) 96

ILECC110108(WW/BB) 100



ILECC21CC108(WW/BB) 101



ILECM1 107

ILECX1 107

ILED110120(BB/WW) 90

ILED11072(BB/WW) 90

ILED110H(BB/WW) 90

ILED110L(BB/WW) 90


ILED20272(BB/WW) 90

ILED202H(BB/WW) 90

ILED202L(BB/WW) 90


ILED21072(BB/WW) 90

ILED210H(BB/WW) 90

ILED210L(BB/WW) 90

ILED21C120(BB/WW) 91

ILED21C72(BB/WW) 91

ILED21CH(BB/WW) 91

ILED21CL(BB/WW) 91


ILED31172(BB/WW) 90

ILED311H(BB/WW) 90

ILED311L(BB/WW) 90


ILED41272(BB/WW) 91

ILED412H(BB/WW) 91

ILED412L(BB/WW) 91

ILEI120 92

ILEI60 92

ILEJ102 92

ILEJ108 92

ILEJ114 92

ILEJ120 92

pattern no. page

ILEJ126 92

ILEJ132 92

ILEJ24 92

ILEJ30 92

ILEJ36 92

ILEJ42 92

ILEJ48 92

ILEJ54 92

ILEJ60 92

ILEJ66 92

ILEJ72 92

ILEJ78 92

ILEJ84 92

ILEJ90 92

ILEJ96 92

ILEO110120(WW/BB) 98

ILEO11072(WW/BB) 98

ILEO110H(WW/BB) 98


ILEO20272(WW/BB) 98

ILEO202H(WW/BB) 98

ILEO202L(WW/BB) 98


ILEO21072(WW/BB) 98

ILEO210H(WW/BB) 98

ILEO210L(WW/BB) 98

ILEO21C120(WW/BB) 99

ILEO21C72(WW/BB) 99

ILEO21CH(WW/BB) 99

ILEO21CL(WW/BB) 99


ILEO31172(WW/BB) 98

ILEO311H(WW/BB) 98

ILEO311L(WW/BB) 98


ILEO41272(WW/BB) 98

ILEO412H(WW/BB) 98

ILEO412L(WW/BB) 98

ILEOC110108(WW/BB) 102



ILEOC21C108(WW/BB) 103



ILEPLJ24 95

ILEPLS120 95

ILEPLS72 95

ILEPSPEPU(W/G/B)C 94

ILEPSPEPU(W/G/B)H 94

ILEPSPEPU(W/G/B)L 94

ILEPSPHPE(W/G/B)C 94

ILEPSPHPE(W/G/B)H 94

ILEPSPHPE(W/G/B)L 94

ILEPSPHPU(W/G/B)C 94

ILEPSPHPU(W/G/B)H 94

ILEPSPHPU(W/G/B)L 94

ILEPSPNPN(W/G/B)C 93

ILEPSPNPN(W/G/B)H 93

ILEPSPNPN(W/G/B)L 93

ILEPSPPPH(W/G/B)C 93

ILEPSPPPH(W/G/B)H 93

pattern no. page

ILEPSPPPH(W/G/B)L 93

ILEPSPPPN(W/G/B)C 93

ILEPSPPPN(W/G/B)H 93

ILEPSPPPN(W/G/B)L 93

ILEPSPPPU(W/G/B)C 93

ILEPSPPPU(W/G/B)H 93

ILEPSPPPU(W/G/B)L 93

ILEPSPUPU(W/G/B)C 93

ILEPSPUPU(W/G/B)H 93

ILEPSPUPU(W/G/B)L 93

ILEU110120(WW/BB) 104

ILEU11072(WW/BB) 104

ILEU110H(WW/BB) 104

ILEU202120(WW/BB) 104


ILEU202H(WW/BB) 104

ILEU202L(WW/BB) 104

ILEU210120(WW/BB) 104


ILEU210H(WW/BB) 104

ILEU210L(WW/BB) 104

ILEU21C120(WW/BB) 104

ILEU21C72(WW/BB) 104

ILEU21CH(WW/BB) 104

ILEU21CL(WW/BB) 104

ILEU311120(WW/BB) 104


ILEU311H(WW/BB) 104

ILEU311L(WW/BB) 104

ILEU412120(WW/BB) 104


ILEU412H(WW/BB) 104

ILEU412L(WW/BB) 104

ILEW110120(BB/WW) 105

ILEW11072(BB/WW) 105

ILEW110H(BB/WW) 105

ILEW110L(BB/WW) 105

ILEW202120(BB/WW) 105

ILEW20272(BB/WW) 105

ILEW202H(BB/WW) 105

ILEW202L(BB/WW) 105

ILEW210120(WW/BB) 105

ILEW21072(WW/BB) 105

ILEW210H(WW/BB) 105

ILEW210L(WW/BB) 105

ILEW21C120(WW/BB) 106

ILEW21C72(WW/BB) 106

ILEW21CH(WW/BB) 106

ILEW21CL(WW/BB) 106

ILEW311120(WW/BB) 105


ILEW311H(WW/BB) 105

ILEW311L(WW/BB) 105

ILEW412120(WW/BB) 105


ILEW412H(WW/BB) 105

ILEW412L(WW/BB) 105

ILTCS(S/B4/T4)(SG/SC)52304 27

ILTCS(S/B4/T4)(SG/SC)63364 27

ILTCY(S/B4/T4)(SG/SC)52304 27

ILTCY(S/B4/T4)(SG/SC)63364 27

pattern no. page

ILTCY(S/B/T)M108484(H/V)N 88























ILTCY(S/B/T)MG54451 65








ILTCY(S/B/T)(MG/MC)54453 65




ILTEH(S/B/T)M108484(H/V)N 86























ILTOE(L/R)(S/B4/T4)SG35601 14



Alpha-Numeric Index Islands Collection by Knoll®

108

pattern no. page








ILTOE(L/R)(S/B4/T4)(SG/SC)35603 14










ILTOPA(S/B4/T4)SG481 11






ILTOPA(S/B4/T4)(SG/SC)483 11






ILTOPA(S/B/T)MG481 63












ILTOPA(S/B/T)(MG/MC)483 63






ILTOPA(S/B/T)X301 33












ILTOPA(S/B/T)(X/XC)303 33






pattern no. page

ILTOPB(S/B4/T4)SG481 12






ILTOPB(S/B4/T4)(SG/SC)483 12






ILTOPB(S/B/T)MG481 64












ILTOPB(S/B/T)(MG/MC)483 64






ILTOPB(S/B/T)X301 34












ILTOPB(S/B/T)(X/XC)303 34






ILTOR(L/R)(S/B4/T4)SG33601 15








ILTOR(L/R)(S/B4/T4)(SG/SC)33603 15








ILTOT(L/R)(S/B4/T4)SG36441 13

pattern no. page










ILTOT(L/R)(S/B4/T4)(SG/SC)36443 13










ILTP2(S/B4/T4)SG481 10






ILTP2(S/B4/T4)(SG/SC)483 10






ILTPT(S/B4/T4)SG361 9










ILTPT(S/B4/T4)(SG/SC)363 9








ILTPT(S/B/T)(MG/MC)453 62








ILTRC(S/B4/T4)(SG/SC)48244 25








pattern no. page














ILTRC(S/B/T)M108484(H/V)N 80























ILTRC(S/B/T)X108364H 49




ILTRC(S/B/T)X120364V 50


























109

pattern no. page










ILTRD(S/B4/T4)SG301 5












ILTRD(S/B4/T4)(SG/SC)303 5









ILTRD(S/B/T)MG451 58
















ILTRD(S/B/T)(MG/MC)453 58








ILTRD(S/B/T)X301 28

ILTRD(S/B/T)X302 28

ILTRD(S/B/T)X305 38

ILTRD(S/B/T)X306 38

ILTRD(S/B/T)X361 28

ILTRD(S/B/T)X362 28

ILTRD(S/B/T)X365 38

ILTRD(S/B/T)X366 38

ILTRD(S/B/T)X421 28

ILTRD(S/B/T)X422 28

ILTRD(S/B/T)X425 38

pattern no. page

ILTRD(S/B/T)X426 38

ILTRD(S/B/T)(X/XC)303 28






ILTRL(S/B4/T4)(SG/SC)48244 24





















ILTRL(S/B/T)M108484(H/V)N 78























ILTRL(S/B/T)X108364H 46




ILTRL(S/B/T)X120364V 47










pattern no. page

























ILTRR(S/B/T)M108484(H/V)N 82























ILTRR(S/B/T)X108364H 52




ILTRR(S/B/T)X120364V 53














pattern no. page





















ILTRT(S/B/T)M108484(H/V)N 76























ILTRT(S/B/T)X108364H 43




ILTRT(S/B/T)X120364V 44



















110

pattern no. page

















ILTSA(S/B/T)MG485 71, 72






ILTSA(S/B/T)(MG/MC)484 67



ILTSC(S/B4/T4)SG301 7












ILTSC(S/B4/T4)(SG/SC)303 7











ILTSC(S/B/T)MG481 60












ILTSC(S/B/T)(MG/MC)483 60





pattern no. page


ILTSC(S/B/T)X301 31

ILTSC(S/B/T)X302 31

ILTSC(S/B/T)X305 40

ILTSC(S/B/T)X306 40

ILTSC(S/B/T)X361 31

ILTSC(S/B/T)X362 31

ILTSC(S/B/T)X365 40

ILTSC(S/B/T)X366 40

ILTSC(S/B/T)X421 31

ILTSC(S/B/T)X422 31

ILTSC(S/B/T)X425 40

ILTSC(S/B/T)X426 40

ILTSC(S/B/T)(X/XC)303 31






ILTSP(S/B/T)MG451 62
















ILTSP(S/B/T)X301 32

ILTSP(S/B/T)X302 32

ILTSP(S/B/T)X305 41

ILTSP(S/B/T)X306 41

ILTSP(S/B/T)X361 32

ILTSP(S/B/T)X362 32

ILTSP(S/B/T)X365 41

ILTSP(S/B/T)X366 41

ILTSP(S/B/T)X421 32

ILTSP(S/B/T)X422 32

ILTSP(S/B/T)X425 41

ILTSP(S/B/T)X426 41

ILTSP(S/B/T)(X/XC)303 32






ILTSQ(S/B4/T4)SG301 6












pattern no. page

ILTSQ(S/B4/T4)(SG/SC)303 6











ILTSQ(S/B/T)MG481 59






ILTSQ(S/B/T)(MG/MC)483 59



ILTSQ(S/B/T)X301 29

ILTSQ(S/B/T)X302 29

ILTSQ(S/B/T)X305 39

ILTSQ(S/B/T)X306 39

ILTSQ(S/B/T)X361 29

ILTSQ(S/B/T)X362 29

ILTSQ(S/B/T)X365 39

ILTSQ(S/B/T)X366 39

ILTSQ(S/B/T)X421 29

ILTSQ(S/B/T)X422 29

ILTSQ(S/B/T)X425 39

ILTSQ(S/B/T)X426 39

ILTSQ(S/B/T)(X/XC)303 29






ILTSR(S/B/T)M108484(H/V)N 84























ILTSR(S/B/T)X108364H 55




pattern no. page

ILTSR(S/B/T)X120364V 56


































ILTSS(S/B4/T4)SG301 8












ILTSS(S/B4/T4)(SG/SC)303 8










ILTSS(S/B/T)MG481 61






ILTSS(S/B/T)(MG/MC)483 61




111

pattern no. page




ILTSS(S/B/T)X301 30

ILTSS(S/B/T)X302 30

ILTSS(S/B/T)X305 39

ILTSS(S/B/T)X306 39

ILTSS(S/B/T)X361 30

ILTSS(S/B/T)X362 30

ILTSS(S/B/T)X365 39

ILTSS(S/B/T)X366 39

ILTSS(S/B/T)X421 30

ILTSS(S/B/T)X422 30

ILTSS(S/B/T)X425 39

ILTSS(S/B/T)X426 39

ILTSS(S/B/T)(X/XC)303 30






ILTVR(S/B4/T4)(SG/SC)24334 26

ILTVR(S/B4/T4)(SG/SC)30364 26

ILTVS(S/B4/T4)(SG/SC)24334 26

ILTVS(S/B4/T4)(SG/SC)30364 26


112

This Selling Policy supercedes all previous selling policies. Prices, discounts and product offerings are subject to change without notice.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Terms & Conditions

of SalesSales by Knoll, Inc. or Knoll North America Corp. (‘‘Seller’’) of Knoll Product Lines (hereinafter ‘‘Products’’) within the United States and Canada are made onlyon the terms which are contained in this Selling Policy. Seller hereby gives notice of its objection to any different or additional terms and conditions. This sale isexpressly conditional upon Purchaser’s assent to the terms and conditions set forth below. Additional terms and conditions may apply to KnollStudio andKnollTextiles orders. These terms and conditions may be modified or supplemented only by a written document signed by an authorized representative of Seller.These terms and conditions supercede any prior and/or contemporaneous agreements or correspondence between Purchaser and Seller. Written quotationsexpire thirty (30) days from the date of issuance and can be withdrawn by written notice anytime during that period. Where Purchaser and Seller have enteredinto the Knoll Electronic Terms and Conditions, all orders, acknowledgements, invoices and other business communications placed or transmitted inaccordance with the Knoll Electronic Terms and Conditions shall be deemed to be in writing and signed and shall be valid for all purposes as if they wereoriginated and maintained in documentary form.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Ordering Information All orders must be in writing. The product pattern number(s) contained on Seller’s order acknowledgement shall be the final expression of the order.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Order Confirmation A purchase order is not binding on Seller until Purchaser has received Seller’s order confirmation or acknowledgment.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Pricing Policies List prices are subject to change without notice.List prices shall be those prices in effect on the date of receipt of a complete purchase order unless shipment is requested more than ninety (90) days after orderentry in which case prices in effect on the date of shipment apply. List prices include specified freight costs. Unless specified in writing by Seller, no othercharges are included in Seller’s list prices.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Taxes All sales, use, excise and other taxes applicable to the sale of the Products shall be paid by Purchaser. If Purchaser claims an exemption from any tax,Purchaser shall submit to Seller the appropriate exemption certificates.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Terms of Payment Payment for one hundred percent (100%) of the net order amount is due within thirty (30) days of the date of invoice, which is generally issued upon shipment.In case of any discrepancies, such as shortages, and Seller is notified in writing within ten (10) days of receipt of Product, only that portion may be deductedand the balance paid. For orders greater than $100,000 net, a fifty percent (50%) deposit is due at the time of order placement, with the remainder due withinthirty (30) days of the date of invoice.KnollStudio orders less than $2,000 require payment for one hundred percent (100%) of the net order amount (including any applicable sales tax and chargesfor inside delivery, special packaging, etc.), due at time of order placement. For KnollStudio orders greater than $2,000, a one-half (50%) deposit is due at timeof order placement with the remainder (including any applicable sales tax and charges for inside delivery, special packaging, etc.) due prior to shipment.If, in the judgment of Seller, Purchaser’s financial condition does not justify the terms of the payment, Seller may require full or partial payment in advance.Past due accounts shall be charged one and one-half percent (1.5%) per month, or the highest rate permitted by law, whichever is less, and will be added to theoutstanding balance. In the event Purchaser defaults on payment, Purchaser shall be liable for all collection costs, including reasonable attorney’s fees andcosts.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Changes andCancellation

Purchase orders may not be changed or cancelled, in whole or in part, without prior written consent of Seller. Changes may effect delivery dates. Expensesincurred because of changes shall be charged to Purchaser. In the event of cancellations, Purchaser will be liable for reasonable cancellation chargesestablished by Seller. Orders for special Product, orders including ‘‘COM’’ (hereinafter defined) material and orders pursuant to expedited delivery programs,may not be canceled.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Freight Prepaid Freight is prepaid and included in the price of all Products, except KnollTextiles, within the 48 contiguous United States for orders placed with Knoll, Inc. andwithin Canada, excluding the Yukon, Northwest Territories, Nunavut and Newfoundland for orders placed with Knoll North America Corp. Packing is tested forrigorous motion and transportation but is not guaranteed to protect furniture from all conditions. If special packaging is required for any reason, please consultwith your sales representative or dealer. Seller shall select the method of shipment and routing. Freight for all KnollTextiles orders is prepaid and added to theinvoice.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Delivery/Freight Charges Shipments outside the contiguous 48 United States and Canada shall be shipped F.O.B. Origin.For shipments outside the contiguous United States and Canada, Purchaser is responsible for the cost of freight from point of embarkation, including anyhandling and transportation charges incidental to loading at the point of departure and unloading at the final destination.Conditions beyond the control of Seller, including weather, available facilities and traffic conditions, may affect exact time of delivery. Seller shall not beresponsible for specific carrier delivery date or time unless it has made a specific delivery commitment, in writing.Nonstandard methods of shipment and/or additional services are available upon request. Purchaser will be billed for the differential cost of any special servicesin excess of standard surface carrier freight costs. Premium charges, at Purchaser’s request, will be added for airfreight, exclusive use of vehicle and extra,export or special packaging. Accessorial charges will be added for inside delivery, extra labor, reconsignment and redelivery.Partial shipments may be made and invoiced by Seller.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Claims All shipments for Knoll Products within the contiguous United States and Canada are F.O.B. Origin. All risk of loss passes to Purchaser at time of delivery tocarrier. Purchaser shall inspect all Products upon receipt and notify Seller within ten (10) working days after receipt of any damage or defects which are, orshould be, apparent from an inspection of the Product and its packaging. Failure of Purchaser to notify Seller during the ten (10) working day period shallconstitute acceptance of the Products and waiver of any apparent defects, errors or shortages. For all claims relating to Product damaged in transit or for anyother claims relating to or arising out of the transportation of the Product, Purchaser must seek recovery from the carrier and Seller has no liability to Purchaserfor such claims. Seller may, upon request, assist Purchaser with filing of such claims with the carrier, but Seller will not be liable for any of these transportationrelated claims.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Seller’s Security Interest Until Seller receives the full payment for the Product, Seller shall have a security interest in the Product. Purchaser agrees to perform all acts, including but notlimited to the execution and filing of documentation, which may be necessary to perfect and assure the security interest of Seller.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Returns The return of Products without a written authorization by Seller shall not be accepted. To receive authorization for Product return, please call Customer Service.All Products that are returned pursuant to a valid authorization shall be subject to a twenty-five percent (25%) of list restocking charge. Products not currentlyoffered for sale by Seller (including COM) shall not be authorized for return. All returned Products must be unused, in original condition and in the originalSeller packing cartons. No refund or credit shall be given for damaged Products.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Held Orders/Storage If Purchaser requests that an order be held or delayed, prices and terms and conditions in effect at the time of shipment shall apply. If Purchaser requests adelay after the time when Seller can defer production, Purchaser will be invoiced for the Product, payable in accordance with standard terms, when the order isready for shipment. Seller may transfer the Product to storage, in which case all expenses incurred in connection with storage, including demurrage, preparationfor storage, storage charges and handling shall be payable by Purchaser upon submission of invoices by Seller. Risk of loss to the Product shall pass to thePurchaser upon delivery of the Product into storage.

Selling Policy

113March 15, 2020

Customer’s Own Material A Purchaser who requests a fabric or other surface material not standard to Seller’s line of Products (‘‘COM’’) must submit samples of the requested material toSeller prior to entry of a purchaser order. Seller shall determine if the material is suitable to its manufacturing processes and meets any requirements ofUnderwriters Laboratories. If the COM is acceptable, Seller will then establish a price for using the COM or the Product in question. For a description of theprocedures for submitting samples and testing, contact customer resources or your sales representative. Seller shall have no responsibility for the appearance,condition, performance, durability, colorfastness or any other physical attribute of the COM. Purchaser shall indemnify and hold Seller harmless for anydamages, injuries or losses arising out of or related to use of the COM on the Product.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Warranty Seller warrants to the original Purchaser only that the Products Seller manufactures and sells to Purchaser are free of defects in workmanship and materials,during the applicable warranty period set forth below.Warranty period set forth below is for 24-hour, 7 days a week, multi shift use (includes parts and labor to repair).Should any failure to conform with this limited warranty appear to a Product listed below during the applicable warranty period from the date of shipment, Sellershall, upon prompt written notice, repair or replace, at its option and costs, the affected part or parts.Product and Period of WarrantyLifetime: Antenna Workspaces, AutoStrada, Calibre, Crinion Open Table, Currents, Dividends Horizon, Morrison, Reff Profiles laminate, Rockwell Unscripted,Series 2 Storage, Template, Quoin and other non-wood components (except cascade edge worksurfaces, operational parts, controls, electrical, Lighting, Series 2Veneer Front Storage, digital locks, uphostery, textiles and leathers, special or custom products, see below), Islands Collection table structure, legs, andlaminate worksurfaces.12 Years: Chadwick, Generation by Knoll, k. task, Life, Moment, MultiGeneration by Knoll, Ollo, ReGeneration by Knoll, Remix, and Toboggan seating (exceptseating upholstery, textiles, leathers and finishes, see below).10 Years: Anchor Storage except digital locks, Antenna Workspaces, AutoStrada, Crinion Open Table, Dividends Horizon, Dividends Horizon Satellite Surfaces,Reff Profiles, Rockwell Unscripted, Quoin wood components, Template wood components, Series 2 Veneer Front Storage, cascade edge worksurfaces, WoodCasegoods (The Graham Collection) (except wood casegoods upholstered surfaces, see below), Reuter overheads, Reuter vertical storage, KnollExtra SapperMonitor Arm Collection, Sapper XYZ Monitor Arm Series, Adjustable keyboard mechanisms and platforms, Communication Boards (except fabric boardtextiles, cork and FilzFelt, see below), Smokador collection (except leathers, see below), Orchestra Universal Systems Accessories, k. lounge structuralcomponents, KnollStudio Pixel and Propeller, Tone bases and k.screens.5 Years: Operational parts, controls, electrical, Lighting (except light ballasts, bulbs and power supply, see below), special or custom product, wood veneerproducts and plywood, Currents handcrank, KnollStudio, Rockwell Unscripted wire bases, Spark Series seating structural elements, structural elements of allKnollStudio outdoor products including all Richard Schultz designed products, KnollExtra CPU holders and all universal storage drawers and Power Collection,k. bench (except changes in finish, see below) and k. stand bases (except changes in finish, see below), Islands Collection veneer worksurfaces, operationalparts, wide grommet lid, castors, glides and electrical.3 Years: Rockwell Unscripted upholstery (except textiles and leather), Office Seating upholstery, textiles, leathers and finishes. Fabric boards textiles andSmokador Collection leathers, KnollExtra Pop Up Screens.2 Years: Anchor Storage digital locks, Quoin digital locks, all other KnollExtra product and KnollTextiles Ultrasuede.1 Year: Light ballasts, bulbs and power supply, seating upholstered armpads and soft armpads, wood casegoods upholstered surfaces. KnollStudio, outdoorproduct finishes, k. lounge upholstery and k. lounge fabric. Rockwell Unscripted fabric and accessories, Spinneybeck leathers, and KnollTextiles upholsteryexcept Ultrasuede.This warranty does not apply to:• Damage caused by a carrier other than the Seller.• Normal wear and tear or acts or omissions of parties other than Seller (including user modification, improper use or installation of Products).• COM or other third party materials applied to Products.• Products not installed by or under the auspices of a Knoll Dealer.• Dramatic temperature variations or exposure to unusual conditions.• Changes in surface finishes, including colorfastness due to aging or exposure to light.• Except as specifically noted above, textiles and upholstery supplied by KnollTextiles and Spinneybeck FilzFelt (consult current price lists for applicable

warranties).Natural variations occurring in wood, marble, and leather shall not be considered defects, and the Seller does not guarantee the colorfastness or matching of thecolors, grains or textures, or surface hardness of such materials. The Seller also does not guarantee the colorfastness of fiberglass panel surfaces.THE EXPRESS WARRANTIES CONTAINED HEREIN ARE IN LIEU OF ALL OTHER WARRANTIES, EXPRESS OR IMPLIED, INCLUDING ANYWARRANTIES OF MERCHANTABILITY AND FITNESS FOR PARTICULAR PURPOSE AND ALL OTHER WARRANTIES ARISING FROM COURSE OFDEALING OR USAGE OF TRADE.The remedies provided above are the Purchaser’s sole remedies for any failure of Seller to comply with its obligations regarding the workmanship of itsProducts. Correction of any nonconformity in the manner and for the period of time provided shall constitute complete fulfillment of all liabilities of Seller, withrespect to or arising out of the Product furnished hereunder.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Delay/Force Majeure Seller shall not be liable for failure to perform or for delay in performance due to fire, flood, strike or other labor difficulty, act of God, act of war or terrorism, actof any governmental authority or of the Purchaser, riot, embargo, fuel or energy shortage, wrecks or delay in transportation, inability to obtain necessary labor,materials or manufacturing facilities from usual sources or failure of suppliers to meet their contractual obligations, or due to any cause beyond its reasonablecontrol. If any such event occurs, Seller may extend delivery dates by a period of time necessary to overcome the effect of such delay, allocate available Productor cancel any purchase order.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Compliance with Law PURCHASER IS SOLELY RESPONSIBLE FOR COMPLIANCE WITH ALL APPLICABLE FEDERAL, STATE AND LOCAL LAWS, ORDINANCES,REGULATIONS, RULES AND STANDARDS RELATING TO THE INSTALLATION, MAINTENANCE, USE AND OPERATION OF THE PRODUCTS.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Patents Subject to the following provisions, Seller shall, at its own expense, defend or, at its option, settle any claim, suit or proceeding brought against the Purchaser,and/or its vendees, mediate and immediate, so far as based on an allegation that any Product or any part thereof furnished hereunder constitutes a direct or acontributory infringement of any claim of any patent of the United States or Canada. This obligation shall be effective only if Purchaser shall have made allpayments then due hereunder and if Seller is notified promptly in writing and given authority, information and assistance for the defense of said claim, suit orproceeding. Seller shall pay all damages and costs awarded in such suit or proceedings so defended.The foregoing indemnity does not apply to the following:• Products supplied according to a design other than that of Seller, and which is required by the Purchaser.• Combination of the Product with another product not furnished hereunder unless Seller is a contributory infringer.• Any settlements of a suit or proceeding made without Seller’s written consent.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Limitations of Liability SELLER, ITS CONTRACTORS, AUTHORIZED DEALERS AND SUBCONTRACTORS OR SUPPLIERS OF ANY TIER SHALL NOT BELIABLE TO PURCHASER FOR ANY SPECIAL, INDIRECT, INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING FROM A BREACHOF THIS AGREEMENT.

Selling Policy

114March 15, 2020

Purchaser’s remedies set forth herein are exclusive and the liability of Seller with respect to the breach of this agreement or any contract entered into betweenthe parties pursuant hereto shall not exceed the price of the Product or part on which such liability is based.

Selling Policy

115March 15, 2020

General Ordering Information

The ProductsThis guide encompasses all standard products for this product group.

SizesDimensions listed in this guide are indicated as:H = heightW = widthD = depthDia. = diameterRad. = radius

PricingAll prices shown are list.

How to OrderSelect pattern numbers and quantities required for your complete installation. Product questions can beaddressed in the specific sections of this guide or by contacting your sales representative or customerresource representative at 1-800-343-5665.

Next, select options (if required), along with colors and finishes appropriate to each product. Reference theFinishes and Fabrics pages for color designations.

On large installations, an item’s ‘‘designated area’’ can be specified to assist in product organization andhandling.

To expedite complete / correct entry of your order, be certain all pattern numbers, quantities, colors andarea identifications are completely specified. Also, include complete purchase order numbers, bill-to andship-to addresses, a contact name and specific factory shipping dates required.

Mail all orders to:Knoll, Inc.1235 Water StreetP.O. Box 157East Greenville, PA 18041Attention: Order Entry

Once your order is entered at Knoll, an acknowledgment will be mailed to you. You will be advised of yourscheduled shipping date within five days of the original acknowledgment. If it is necessary to revise yourorder, please contact your customer resource representative.

Sustainability Statement

Sustainable design is a key component of Knoll’s environmental focus. Our commitment to socialresponsibility and a healthy environment has prompted us to further articulate our longstandingenvironmental programs and, with encouragement and support from our colleagues in the industry, we havere-energized our focus on such ‘‘green’’ initiatives as life cycle analysis and LEED™ certification. Knoll isproud to have contributed to projects that have received LEED certification from the U.S. Green BuildingCouncil.

For the latest information on Knoll products that help our customers achieve LEED certification, log on toknoll.com, click on ‘‘About Knoll’’ and then ‘‘Environmental Focus.’’

115

Islands Collection by Knoll...144 Graphite Pear* ** 145 Zebra* 147 Silverwood 148 Smokewood 149...

Documents

Transcript of Islands Collection by Knoll...144 Graphite Pear* ** 145 Zebra* 147 Silverwood 148 Smokewood 149...

Islands Collection by Knoll...144 Graphite Pear* ** 145 Zebra* 147 Silverwood** 148 Smokewood** 149...

Documents

Transcript of Islands Collection by Knoll...144 Graphite Pear* ** 145 Zebra* 147 Silverwood** 148 Smokewood** 149...

Islands Collection by Knoll...144 Graphite Pear* ** 145 Zebra* 147 Silverwood 148 Smokewood 149...

Transcript of Islands Collection by Knoll...144 Graphite Pear* ** 145 Zebra* 147 Silverwood 148 Smokewood 149...