1 Complete Support Global REV 1.0

2 Complete Support Global REV 1.0

INGLASS GROUP: The Company

•1987- The INglass Group, based in San Polo di Piave, was founded as Incos. INglass designsand manufactures molds for the plastic materials sector.• 1991- the company began focusing and specializing in multi-colour and multi-component rotating tools for car lighting (front and rear lights). • 2001- The HRSFlow Division was set up for the production of hot runner systems• 2004 - Resources were dedicated to the development of injection-compression technology forthe production of wide panoramic polycarbonate surfaces to replace glass in the automotive sector (Plastic Glazing).• 2006 - M.O.M. control units was released on the market to monitor injection moldingprocesses.• 2007 - New service that aims to cooling optimization through improvements and solutions in the mold, with possible use of Selective Laser Melting insert (with conformal waterlines).

3 Complete Support Global REV 1.0

Inglass-HRSflow is a global company in continuos growing:

• Over 300 employees worldwide.

• Inglass-HRSflow headquarters are located in San Polo di Piave (North East Italy). See map on thispage.

• 2009 objectives include further subsidiaries opening to improve global service capabilities

INGLASS - HRSFLOW COMPANY

4 Complete Support Global REV 1.0

– ARGENTINA– AUSTRALIA– BRAZIL– CHINA– CZECH REPUBLIC– FRANCE– GERMANY– INDIA– JAPAN– KOREA– MEXICO– N. AMERICA– RUSSIA– SLOVAKIA– SLOVENIA– SPAIN/PORTUGAL– SWEDEN– TAIWAN– TURKEY– UK

Inglass HRSflow ITALY:Headquarter Production Warehouse

Inglass HRSFlow SUBSIDIARIES with:

- SALES OFFICE

- ENGINEERING OFFICE

- CUSTOMER SERVICE

Warehouse

HRS DISTRIBUTORS

INGLASS HRSFlow PRESENCE WORLDWIDE

INGLASS - HRS Russia Opening target 2009

INGLASS - HRS Poland Opening target: 2009

5 Complete Support Global REV 1.0

DIPENDENTI INGLASS

030 40 47

215

6073 78

40

7275

165 174

50

66

109130

0

50

100

150

200

250

300

350

400

2004 2005 2006 2007 2008 2009

FOREIGNEMPLOYEES

HRSFLOWItaly

INGLASS Italy

INGLASS /HRSFLOWItaly

65%

35%

TOTAL FORECAST 2009 INGLASS/HRSFLOW TURNOVER

14 16 17 19 19 19

10

1517

2329

35

-

10

20

30

40

50

60

2004 2005 2006 2007 2008 Budget 2009YEARSINGLASS HRSFLOW

HRSFLow trademark- HOT RUNNERS –AUTOMATION -

COMPANY TURNOVER

INGLASS trademark- MOLDS FOR LIGHTING/GLAZING -

EMPLOYEES

6 Complete Support Global REV 1.0

FINAL CUSTOMERS

7 Complete Support Global REV 1.0

FINAL CUSTOMERS – Other sectors

8 Complete Support Global REV 1.0

OUR EXPERTISE FOR COMPETITIVE EDGE

9 Complete Support Global REV 1.0

SOLUTIONS PROVIDER

10 Complete Support Global REV 1.0

A COMPLETE SUPPORT IN THE CUSTOMER CYCLE

11 Complete Support Global REV 1.0

CREATING VALUE TO OUR CUSTOMERS

INGLASS - HRS offers added value to the customer chain

HR supplier

Mold maker

TIER 1Car

Maker

HR + mold cooling + process control

Simple HR supplier

HRSFlow + INGLASS GLAZING tech.

VALUE

HR + mold cooling + new technologies

new STD CO2 reduction / consumption, lightweighting

Car Styling + new STD CO2 reduction / consumption, lightweighting

12 Complete Support Global REV 1.0

OUR PRODUCTS : Lighting molds

Inglass HRS is leader worldwide inMulticolor rotative molds for automotive lighting applications

13 Complete Support Global REV 1.0

H000710.0 H000545.0 1500 mm

700 mm

BY KIND PERMISSION OF...

OUR PRODUCTS: Glazing Molds

14 Complete Support Global REV 1.0

PREWIRED SYSTEMS HOT HALVES

OUR PRODUCTS: Hot Runners Systems

For Big parts

For Medium - Small parts

15 Complete Support Global REV 1.0

M.O.M. – Molding Optimization Manager

• Provides thermoregulation in the HR

• Monitors energy consumption

• Manages sequential valve gate opening and closing

ELD – Electronic Leak Detector

HRCU- Hot Runner Control Unit

Control Unit for heatregulation during injectionphase

Sequential time control unit for nozzle timing

Easy-to-use device to quickly locate any leakageof plastic material ( or other liquid) inside the mold

STC –Sequential Time Control

OUR PRODUCTS: Controllers and Automation

16 Complete Support Global REV 1.0

HRS –INGLASS : A TOTAL SUPPORT FOR A COMPLETE PROGRAM

PHASE I PHASE I EngineeringEngineering

PHASE II PHASE II SupplySupply

PHASE III PHASE III ProductionProduction

PHASE I : Engineering supply

Activity Responsabile In coordination with Supervisor

part analysis and definition of critics parts HRS/Inglass TIER ONE TIER ONE

plastic material definition TIER ONE HRS/Inglass TIER ONE

analysis and optimization of criticalities (with cooling, moldflow, warpage…) and defintion of benefits on cost and quality

HRS/Inglass TIER ONE TIER ONE

Study of application of new/different technologies (Coinjection, Mucell…) and definition of benefits on cost and quality

HRS/Inglass TIER ONE TIER ONE

parts codesign HRS/Inglass Moldmakers / TIER ONE TIER ONE

Suggestion of moldmakers HRS/Inglass TIER ONE TIER ONE

Analysis of production machines and lines and evaluation of MOM, ELD implementation with definition of benefits on cost and quality

HRS/Inglass TIER ONE TIER ONE

17 Complete Support Global REV 1.0

PHASE III : Try outs and SOP

Activity Responsible In coordination with Supervisor

Presecnce at try out and launch of production HRS/Inglass TIER ONE TIER ONE

Support on injection process set up and optimization HRS/Inglass TIER ONE TIER ONE

Check of part quality and cost and comparison with forecasted values TIER ONE HRS/Inglass TIER ONE

Eventual improvement on cycle/quality TIER ONE HRS/Inglass TIER ONE

Phase II : tools and components supply

Activity Responsible In coordination with Supervisor

Supplier definition TIER ONE

Molds design and production Moldmakers HRS/Inglass TIER ONE

Hot Runner design and production HRS/Inglass Moldmakers TIER ONE

Special cooling insert design and production HRS/Inglass Moldmakers / TIER ONE TIER ONE

Lighting molds design and production HRS/Inglass TIER ONE TIER ONE

Eventual Molds Purchasing in China HRS/Inglass TIER ONE TIER ONE

MOM and ELD HRS/Inglass TIER ONE

HRS –INGLASS : A TOTAL SUPPORT FOR A COMPLETE PROGRAM

18 Complete Support Global REV 1.0

PLASTIC TECHNOLOGIES 100%

EXPERIENCE TO CREATE VALUEEXPERIENCE TO CREATE VALUE

- Part quality improvement

- Part cost reduction

- Production beackdown reduction

- Production efficiency improvement

19 Complete Support Global REV 1.0