Laying A Flagstone WalkwayMortar & Grout

Original SidewalkRemoval of original sidewalk

Original sidewalkNotice the section near door which contains wire in the

concrete.We decided to leave it and taper down to driveway

Rent JackhammerWe used a Makita (Breaker) from Home Depot

Sidewalk removedFrom section near door to driveway

Sidewalk removedBetter view

Poured ConcretePoured concrete from section near door to driveway & then

began positioning flagsone

start to lay stoneMortaring flagstones onto concrete using Custom Building

Products Medium Bed Mortar. Tapering down as we go along.

continue to lay stonesWorking from the wall out and down to the driveway.

finishing flagstoneAll flagstone is now mortared to the concrete bed.

sealed flagstoneA critical step! Make sure to seal the flagstone with a quality

sealer. This will protect the flagstone from the grout that is next.

flagstone groutedWe used Natural Grey Saltillo Tile Grout which allows for larger

grout joints.

finished projectWe resealed the entire surface, flagstone and grout.