Post on 17-Jan-2022
HENCON TRANSVERS TANKER
Mobile vehicle for transporting fuels and lubricants and refuelling motor-vehicles in underground mines. Overall design and technical features ensure high maneuverability and reliability of the machine underground in the chemically aggressive environment at temperatures of - 35 °C to +35 °C and relative humidity up to 100%. TransVers Tanker complies with international safety standards underground conditions.
TransVers Tanker is an articulated vehicle with full-time four-wheel drive system. Tank(s), grease drums and dispensing units are on the rear frame.
• closed operator cabin with dust air filter • two-stage engine air filter • Murphy engine oil-level sight glass instead of dipstick • quick-release couplings for filling of engine and hydraulic oil • autonomous fire suppression system
2
ENGINE
Deutz TCD2013 L06 2V
Emission class
EC Step III A and Tier 3
Max power output
176 KW @ 1900 rpm
No. of cylinders
4
Swept volume
7145 cm³
Max torque
1050 Nm
TRAVEL PUMPS
Make
Linde
Model
HPV210
Type
Variable displacement axial piston pump
Make
Linde
Model
HMV210
STEERING
Central steering with dual cylinders Integrated cushion valves Orbitrol valve actuation Hydraulic accumulator Manual override for towing
ELECTRICAL EQUIPMENT
Voltage
24 VDC
Batteries
12 V, 105 A/h
Alternator
100 A
Diesel fuel tank capacity
7 m 3
Grease
4 drums 0,75 m3 each
Tanker throughput
130 liters/min
Oil filling
130 liters/min
Dispensing hoses
1 x 18 m and 4 x 15 m
Fuel tank
AXLES
Model
240 liters
A closed circuit design, an ideal solution for a long and trouble free lifetime. Dual speed range hydrostatic drive
between axles emulatuion. Each drive axle has its separate drive circuit: one hydraulic motor and one pump.
Make
Brevini
Model
BZ3-340
Kessler D81
Axle front
Driving axle, equalizing beam suspension with rubber springing elements, planetary type.
Axle rear
Driving axle, planetary type rigid mounted
Service brake
Dual circuit, multi disk wet type on both axles, hydraulically applied via proportional modulating valve
Emergency brake
Hand operated, spring
applied and hydraulic
release
Operator's cabin The machine has a comfortable three seat cabin with good visibility of the working area. The air ventilation system includes a heater and a windscreen demister function. The cabin is equipped with ROPS / FOPS. The machine has a multi-functional display that allows the operator to see all the machine informa- tion. The driver`s seat has a suspension, a safety belt
Refuelling equipment Fuel transport and filling station is mounted on the vehicle rear frame. It includes a diesel tank and two grease drums. Fuel tank is equipped with fuel level and water sensor. Fuel level can be controlled by sight glasses, level indicators and dipstick gauge fitted at the top of the tank. Fuel filling systems consists of 24V electric fuel pump and resettable memory flow meters; oil filling system includes pneumatic pump mounted on the oil and grease tanks. Engine driven onboard compressor powers the oil pump and is used for tyre charging.
TECHNICAL PARAMETERS
FUNCTIONAL PARAMETERS
BRAKE SYSTEM
TRAVEL MOTOR
HYDRAULIC PUMP DRIVE GEAR
HYDROSTATIC DRIVE SYSTEM
DIMENSIONS AND MANOEUVRABILITY
Length 9760 mm Max speed 25 km/h Width 2340 mm Gradient 15° Height 2400 mm Steering angle 50°
Turning radius inner 3200 mm Operating weight 19000 kg
Turning radius outer 6400 mm Capacity 10000 kg
Ground clearance 500 mm Tyres 14.00 x 24
4