GSM-P&O_I&II_02_200909 Fundamentals and Design of Planning

Simulation

ZTE University

GSM BSS Team

Objective

At the end of this course, you will be able to:

Learn the fundamentals of network planning

Learn the fundamentals and operating process

of simulation

Learn the propagation model and principle

Learn the map knowledge

Content

Chap.1: Map Knowledge

Chap.2: Network Planning Flow

Chap.3: Information Collection and Requirement Analysis

Chap.4: Link Budget

Chap.5: Common Propagation Model and Parameters

Chap.6: Capacity Planning

Chap.7: Antenna Installation and Debugging

This chapter introduces the information about map. For

specific sections, refer to as follows:

Chap.1: Map Knowledge

Overview of Digital Map Map Classification Map Quality Assessment Criteria Digital Map Composition Terminologies Related to Maps Map Elements

This chapter introduces the network planning flow by using

chart and descriptions. For specific sections, refer to as

follows:

Chap.2: Network Planning Flow

Information Collection and Research & Analysis of Network Planning

Survey, Site Selection and Radio Wave Test Network Capacity Planning Radio Coverage Design and Coverage Prediction Frequency Planning and Interference Analysis Radio Resource Parameter Design

Network planning and optimization process

Chap.2: Network Planning Flow

Work in this Phase Information Collection Frequency Sweeping Test

Chap.3: Information Collection and Requirement Analysis

For specific sections, refer to as follows:

Purposes of Link Budget Downlink Budget Uplink Budget Calculation of Uplink and Downlink Balance Equivalent Maximum Allowable Path Loss

Chap.4: Link Budget

For specific sections, refer to as follows:

Okumura-Hata Model Cost231 Model Common Expression of the Okumura-Hata and COST2

31 Models Standard Universal Model (AIRCOM Expression) Propagation Model Test and Correction

Chap.5: Common Propagation Model and Parameters

For specific sections, refer to as follows:

Basic Concepts Capacity Predication Capacity Planning Process Channel Capacity Planning Optimization of Capacity Planning Improvement of Network Capacity Location Area Planning

Chap.6: Capacity Planning

For specific sections, refer to as follows:

Coverage Simulation Layered Coverage Coverage Methods in Special Districts

Chap.7: Coverage Planning

For specific sections, refer to as follows:

Analysis of frequency reuse and interference models based on ideal cellular structure

Common anti-interference technologies

Chap.8: Frequency Planning

This chapter describes the following contents:

Cellular Structure Creation Rule Interference Models Frequency Reuse Technology and Interference Analysi

s Frequency Reuse in Groups Cell Splitting Common Anti-Interference Technologies Summary of GSM Frequency Allocation Neighbor Cell Planning

Chap.8: Frequency Planning

For specific sections, refer to as follows:

Overview Information Collection and Data Sorting Engineering Data Creation Presetting Site Layout Coverage Simulation Interference Simulation Report Output Other Auxiliary Settings

Chap.9: Wireless Network Planning Simulation

For specific sections, refer to as follows:

Engineering Parameter Planning Radio Parameter Planning

Chap.10: Network Parameter Planning

For specific sections, refer to as follows: